Diff: targets/TARGET_Freescale/TARGET_MCUXpresso_MCUS/TARGET_KL43Z/drivers/fsl_flexio_uart_dma.h

Revision:

154:37f96f9d4de2

diff -r fa9ff456f731 -r 37f96f9d4de2 targets/TARGET_Freescale/TARGET_MCUXpresso_MCUS/TARGET_KL43Z/drivers/fsl_flexio_uart_dma.h
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/TARGET_Freescale/TARGET_MCUXpresso_MCUS/TARGET_KL43Z/drivers/fsl_flexio_uart_dma.h	Wed Jan 04 16:58:05 2017 +0000
@@ -0,0 +1,191 @@
+/*
+ * Copyright (c) 2015, Freescale Semiconductor, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ *
+ * o Redistributions of source code must retain the above copyright notice, this list
+ *   of conditions and the following disclaimer.
+ *
+ * o Redistributions in binary form must reproduce the above copyright notice, this
+ *   list of conditions and the following disclaimer in the documentation and/or
+ *   other materials provided with the distribution.
+ *
+ * o Neither the name of Freescale Semiconductor, Inc. nor the names of its
+ *   contributors may be used to endorse or promote products derived from this
+ *   software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#ifndef _FSL_FLEXIO_UART_DMA_H_
+#define _FSL_FLEXIO_UART_DMA_H_
+
+#include "fsl_flexio_uart.h"
+#include "fsl_dmamux.h"
+#include "fsl_dma.h"
+
+/*!
+ * @addtogroup flexio_dma_uart
+ * @{
+ */
+
+/*! @file*/
+
+/*******************************************************************************
+ * Definitions
+ ******************************************************************************/
+
+/* Forward declaration of the handle typedef. */
+typedef struct _flexio_uart_dma_handle flexio_uart_dma_handle_t;
+
+/*! @brief UART transfer callback function. */
+typedef void (*flexio_uart_dma_transfer_callback_t)(FLEXIO_UART_Type *base,
+                                                    flexio_uart_dma_handle_t *handle,
+                                                    status_t status,
+                                                    void *userData);
+
+/*!
+* @brief UART DMA handle
+*/
+struct _flexio_uart_dma_handle
+{
+    flexio_uart_dma_transfer_callback_t callback; /*!< Callback function. */
+    void *userData;                               /*!< UART callback function parameter.*/
+
+    size_t txSize; /*!< Total bytes to be sent. */
+    size_t rxSize; /*!< Total bytes to be received. */
+
+    dma_handle_t *txDmaHandle; /*!< The DMA TX channel used. */
+    dma_handle_t *rxDmaHandle; /*!< The DMA RX channel used. */
+
+    volatile uint8_t txState; /*!< TX transfer state. */
+    volatile uint8_t rxState; /*!< RX transfer state */
+};
+
+/*******************************************************************************
+ * API
+ ******************************************************************************/
+
+#if defined(__cplusplus)
+extern "C" {
+#endif
+
+/*!
+ * @name eDMA transactional
+ * @{
+ */
+
+/*!
+ * @brief Initializes the FLEXIO_UART handle which is used in transactional functions
+ *
+ * @param base Pointer to FLEXIO_UART_Type structure.
+ * @param handle Pointer to flexio_uart_dma_handle_t structure.
+ * @param callback FlexIO UART callback, NULL means no callback.
+ * @param userData User callback function data.
+ * @param txDmaHandle User requested DMA handle for TX DMA transfer.
+ * @param rxDmaHandle User requested DMA handle for RX DMA transfer.
+ * @retval kStatus_Success Successfully create the handle.
+ * @retval kStatus_OutOfRange The FlexIO UART DMA type/handle table out of range.
+ */
+status_t FLEXIO_UART_TransferCreateHandleDMA(FLEXIO_UART_Type *base,
+                                             flexio_uart_dma_handle_t *handle,
+                                             flexio_uart_dma_transfer_callback_t callback,
+                                             void *userData,
+                                             dma_handle_t *txDmaHandle,
+                                             dma_handle_t *rxDmaHandle);
+
+/*!
+ * @brief Sends data using DMA.
+ *
+ * This function send data using DMA, this is non-blocking function, which return
+ * right away. When all data have been sent out, the send callback function is called.
+ *
+ * @param base Pointer to FLEXIO_UART_Type structure
+ * @param handle Pointer to flexio_uart_dma_handle_t structure
+ * @param xfer FLEXIO_UART DMA transfer structure, refer to #flexio_uart_transfer_t.
+ * @retval kStatus_Success if succeed, others failed.
+ * @retval kStatus_FLEXIO_UART_TxBusy Previous transfer on going.
+ */
+status_t FLEXIO_UART_TransferSendDMA(FLEXIO_UART_Type *base,
+                                     flexio_uart_dma_handle_t *handle,
+                                     flexio_uart_transfer_t *xfer);
+
+/*!
+ * @brief Receives data using DMA.
+ *
+ * This function receives data using DMA. This is non-blocking function, which returns
+ * right away. When all data have been received, the receive callback function is called.
+ *
+ * @param base Pointer to FLEXIO_UART_Type structure
+ * @param handle Pointer to flexio_uart_dma_handle_t structure
+ * @param xfer FLEXIO_UART DMA transfer sturcture, refer to #flexio_uart_transfer_t.
+ * @retval kStatus_Success if succeed, others failed.
+ * @retval kStatus_FLEXIO_UART_RxBusy Previous transfer on going.
+ */
+status_t FLEXIO_UART_TransferReceiveDMA(FLEXIO_UART_Type *base,
+                                        flexio_uart_dma_handle_t *handle,
+                                        flexio_uart_transfer_t *xfer);
+
+/*!
+ * @brief Aborts the sent data which using DMA.
+ *
+ * This function aborts the sent data which using DMA.
+ *
+ * @param base Pointer to FLEXIO_UART_Type structure
+ * @param handle Pointer to flexio_uart_dma_handle_t structure
+ */
+void FLEXIO_UART_TransferAbortSendDMA(FLEXIO_UART_Type *base, flexio_uart_dma_handle_t *handle);
+
+/*!
+ * @brief Aborts the receive data which using DMA.
+ *
+ * This function aborts the receive data which using DMA.
+ *
+ * @param base Pointer to FLEXIO_UART_Type structure
+ * @param handle Pointer to flexio_uart_dma_handle_t structure
+ */
+void FLEXIO_UART_TransferAbortReceiveDMA(FLEXIO_UART_Type *base, flexio_uart_dma_handle_t *handle);
+
+/*!
+ * @brief Gets the number of bytes still not sent out.
+ *
+ * This function gets the number of bytes still not sent out.
+ *
+ * @param base Pointer to FLEXIO_UART_Type structure
+ * @param handle Pointer to flexio_uart_dma_handle_t structure
+ * @param count Number of bytes sent so far by the non-blocking transaction.
+ */
+status_t FLEXIO_UART_TransferGetSendCountDMA(FLEXIO_UART_Type *base, flexio_uart_dma_handle_t *handle, size_t *count);
+
+/*!
+ * @brief Gets the number of bytes still not received.
+ *
+ * This function gets the number of bytes still not received.
+ *
+ * @param base Pointer to FLEXIO_UART_Type structure
+ * @param handle Pointer to flexio_uart_dma_handle_t structure
+ * @param count Number of bytes received so far by the non-blocking transaction.
+ */
+status_t FLEXIO_UART_TransferGetReceiveCountDMA(FLEXIO_UART_Type *base,
+                                                flexio_uart_dma_handle_t *handle,
+                                                size_t *count);
+
+/*@}*/
+
+#if defined(__cplusplus)
+}
+#endif
+
+/*! @}*/
+
+#endif /* _FSL_UART_DMA_H_ */