Diff: files.cpp

Revision:

0:06ba20deb797

Child:

10:79ad72acf6cb

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/files.cpp	Fri Sep 22 14:17:19 2017 +0000
@@ -0,0 +1,73 @@
+#include "files.h"
+#include "hwcfg.h"
+
+#include "kal_fs.h"
+
+#define __DEVICE_ID__               0x00000017
+
+alp_file_header_t h_rev = {
+    .perm = RW_R,
+    .prop = FS_PERMANENT_NOTIF,
+    .afid = FID_ACTP_RPT_FULL,
+    .ifid = IFID_REPORT,
+    .size = HAL_U32_BYTE_SWAP((uint32_t)sizeof(revision_t)),
+    .alloc= HAL_U32_BYTE_SWAP((uint32_t)sizeof(revision_t))
+};
+
+revision_t f_rev = {
+    .manufacturer_id     = __MANUFACTURER_ID__,
+    /// Device ID: Arbitrary number, at user/customer choice
+    .device_id           = __DEVICE_ID__,
+    /// Hardware Board ID:
+    .hw_version          = __HW_VERSION__,
+    /// Firmware Version: made of
+    ///  - major,minor and patch indexes
+    ///  - fw_id : "build-flavour"
+    ///  FW_ID | MAJOR | MINOR | PATCH | HASH |
+    //     1B  |  1B   |  1B   |   2B  |  4B  |
+    .fw_version.id       = 0,
+    .fw_version.major    = 1,
+    .fw_version.minor    = 0,
+    .fw_version.patch    = 0,
+    .fw_version.hash     = 0x00000000,
+    /// Not used
+    .cup_max_size        = 0x00000000
+};
+
+alp_file_header_t h_sensor_config = {
+    .perm = RW_RW,
+    .prop = FS_VOLATILE,
+    .afid = 0,
+    .ifid = 0,
+    .size = HAL_U32_BYTE_SWAP((uint32_t)sizeof(sensor_config_t)),
+    .alloc= HAL_U32_BYTE_SWAP((uint32_t)sizeof(sensor_config_t))
+};
+
+sensor_config_t f_sensor_config = {
+    .report_type     = REPORT_ON_DIFFERENCE, // Type of report asked
+    .read_period     = 5000,                 // Measure period (ms)
+    .max_period      = 60*30,                // Maximum time between reports (s)
+    .max_diff        = 100,                  // Maximum difference allowed between two reported values
+    .threshold_high  = 900,                  // High threshold value triggering a report
+    .threshold_low   = 100,                  // Low threshold value triggering a report
+};
+
+alp_file_header_t h_sensor_light = {
+    .perm = RW_R,
+    .prop = FS_VOLATILE_NOTIF,
+    .afid = FID_ACTP_RPT_FULL,
+    .ifid = IFID_REPORT,
+    .size = HAL_U32_BYTE_SWAP((uint32_t)sizeof(light_value_t)),
+    .alloc= HAL_U32_BYTE_SWAP((uint32_t)sizeof(light_value_t))
+};
+
+alp_file_header_t h_alarm = {
+    .perm = RW_R,
+    .prop = FS_VOLATILE,
+    .afid = 0,
+    .ifid = 0,
+    .size = HAL_U32_BYTE_SWAP((uint32_t)sizeof(alarm_t)),
+    .alloc= HAL_U32_BYTE_SWAP((uint32_t)sizeof(alarm_t))
+};
+
+alarm_t f_alarm = 255;
\ No newline at end of file