Ubidots example for WizFi310
Dependencies: NetworkSocketAPI WizFi310Interface mbed
Homepage
Prerequisite¶
This example is for sending data to Ubidots(Server).
WIZwiki-W7500 and WizFi310 Shield act as TCP client mode.
To implement this function, you need a Platform board and Wi-Fi board. Below are what we used.
- WIZwiki-W7500 from WIZnet (Platform board)
- WizFi310 from WIZnet (Wi-Fi board)
- ETC: PGM5537(CDS sensor) + 10k resistor
Hardware Configuration¶
WIZwiki-W7500 Pin map¶
- D0 is for RXD, D1 is for TXD
- D6 is for CTS, D7 is for RTS
- D9 is for RESET
WizFi310 Pin map¶
- J1 is for RXD, J3 is for TXD
- SW6-1 is connected to D6 for RTS, SW6-2 is connected to D7 for CTS
- SW5-3 is connected to D9 for RESET
Software¶
main.cpp
#include "TCPSocket.h" #include "mbed.h" #include "WizFi310Interface.h" #define AP_SSID "SSID" #define AP_PASSWORD "PASS" #define AP_SECURITY NSAPI_SECURITY_WPA2 #define VARID_LUX "Ubidots Variable ID" #define TOKEN "Ubidots Token value" #if defined(TARGET_WIZWIKI_W7500) WizFi310Interface wifi(D1, D0, D7, D6, D9, NC, 115200); Serial pc(USBTX,USBRX); AnalogIn myLux(PC_15); #endif int main() { int errConnect; char str[50] = ""; char http_cmd[1000] = ""; char buffer[2048] = ""; pc.baud(115200); printf("WizFi310 NetworkSocketAPI TCP Client Ubidots Example\r\n"); wifi.connect(AP_SSID, AP_PASSWORD, AP_SECURITY); const char *ip = wifi.get_ip_address(); const char *mac = wifi.get_mac_address(); printf("IP address is: %s\r\n", ip ? ip : "No IP"); printf("MAC address is: %s\r\n", mac ? mac : "No MAC"); SocketAddress addr(&wifi, "things.ubidots.com", 80); printf("things.ubidots.com resolved to: %s\r\n", addr.get_ip_address()); TCPSocket socket(&wifi); socket.set_timeout(1000); // Set Block Mode. errConnect = socket.connect("things.ubidots.com", 80); while (true) { if(errConnect!=0) { printf("\r\ncould not connect to socket : error = %d\r\n", errConnect); errConnect = socket.connect("things.ubidots.com", 80); } else { printf("socket connected\r\n"); break; } } sprintf((char *)str, "{\"value\": %d}", (int)(myLux.read()*10000)); printf("%s\r\n", str); int len = strlen((char *)str); sprintf((char *)http_cmd,"POST /api/v1.6/variables/%s/values HTTP/1.1\r\nContent-Type: application/json\r\nContent-Length: %d\r\nX-Auth-Token: %s\r\nHost: things.ubidots.com\r\n\r\n%s\r\n\r\n", VARID_LUX,len, TOKEN, str); //printf("%s\n", http_cmd); socket.send((char *)http_cmd, sizeof((char *)http_cmd)); socket.recv(buffer, sizeof(buffer)); printf("%s",buffer); wait(5); socket.close(); wifi.disconnect(); printf("Done\r\n"); }
Caution¶
This example requires "Variable ID" and "TOKEN value" that can be obtained by signning up to the Ubidots. //