WIZnet / Mbed 2 deprecated WizFi310_STATION_HelloWorld

WizFi310_hello_world_demo

Dependencies:   NetworkSocketAPI WizFi310Interface mbed

You are viewing an older revision! See the latest version

Homepage

Table of Contents

  1. Prerequisite
  2. Hardware Configuration
  3. Software

Prerequisite

This example shows that WIZwiki-W7500 and WizFi310 connects to AP.

To implement this function, you need a Platform board and Wi-Fi board. Below are what we used.

  • WIZwiki-W7500 from WIZnet (Platform board)
  • WizFi310 from WIZnet (Wi-Fi board)

Hardware Configuration

WIZwiki-W7500 Pin map

pin map

  • D0 is for RXD, D1 is for TXD
  • D6 is for CTS, D7 is for RTS
  • D9 is for RESET

WizFi310 Pin map

pin map

  • J1 is for RXD, J3 is for TXD
  • SW6-1 is connected to D6 for RTS, SW6-2 is connected to D7 for CTS
  • SW5-3 is connected to D9 for RESET

Software

main.cpp

#include <stdio.h>
#include "mbed.h"
#include "WizFi310Interface.h"


#define AP_SSID "<SSID>"
#define AP_PASSWORD "<PW>"
#define AP_SECURITY NSAPI_SECURITY_WPA2

#if defined(TARGET_WIZwiki_W7500)
Serial pc(USBTX, USBRX);
WizFi310Interface wifi(D1, D0, D7, D6, D9, NC, 115200);
#endif


/**
 *  \brief Hello World
 *  \param none
 *  \return int
 */
int main()
{
    pc.baud(115200);
 
    printf("WizFi310 Hello World demo. \r\n");
    if ( wifi.connect(AP_SSID, AP_PASSWORD, AP_SECURITY))     return -1;
    printf("IP Address is %s\r\n", wifi.get_ip_address());
    
    wifi.disconnect();
}
All wikipages