Openweathermap example for WizFi310

Dependencies:   WizFi310Interface_Legacy mbed

Fork of WizFi310_OpenWeatherMap by WIZnet

Prerequisite

This example is for obtainning and printting data from OpenWeatherMap(Server).

WIZwiki-W7500 and WizFi310 Shield act as TCP client mode.

To implement this function, you need a Platform board and Wi-Fi board. Below are what we used.

  • WIZwiki-W7500 from WIZnet (Platform board)
  • WizFi310 from WIZnet (Wi-Fi board)

Hardware Configuration

WIZwiki-W7500 Pin map

pin map

  • D0 is for RXD, D1 is for TXD
  • D6 is for CTS, D7 is for RTS
  • D9 is for RESET

WizFi310 Pin map

pin map

  • J1 is for RXD, J3 is for TXD
  • SW6-1 is connected to D6 for RTS, SW6-2 is connected to D7 for CTS
  • SW5-3 is connected to D9 for RESET

Software

main.cpp

/* NetworkSocketAPI Example Program
 * Copyright (c) 2015 ARM Limited
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
 
#include "mbed.h"
#include "WizFi310Interface.h"

#if defined(TARGET_WIZwiki_W7500)
    WizFi310Interface wizfi310(D1, D0, D7, D6, D9, NC, 115200);
    Serial pc(USBTX,USBRX);
#endif

#define SECURE WizFi310::SEC_AUTO
#define SSID "SSID"
#define PASS "PASS"

#define CITY        "Seoul"
#define API_KEY     "API KEY"

int main()
{
    int errConnect;
    char http_cmd[1000] = "";
    char buffer[2048] = "";
    
    pc.baud(115200);
    printf("WizFi310 NetworkSocketAPI TCP Client OpenWeatherMap Example\r\n");
    
    wizfi310.init();
    if( wizfi310.connect(SECURE, SSID, PASS) )    return -1;
    
    const char *ip = wizfi310.getIPAddress();
    const char *mac = wizfi310.getMACAddress();
//    printf("IP address is: %s\r\n", ip ? ip : "No IP");
//    printf("MAC address is: %s\r\n", mac ? mac : "No MAC");
      
    TCPSocketConnection socket;
    socket.set_blocking(1000);   // Set Block Mode.
    errConnect = socket.connect("api.openweathermap.org", 80);    
    
    while (true) {
        if(errConnect!=0) {
            printf("\r\ncould not connect to socket : error = %d\r\n", errConnect);
            errConnect = socket.connect("api.openweathermap.org", 80);
        } else {
            printf("socket connected\r\n");
            break;
        }
    }    
     
    sprintf((char *)http_cmd,"GET /data/2.5/weather?q=%s,uk&appid=%s HTTP/1.0\r\nHost: api.openweathermap.org\r\nConnection: close\r\n\r\n",
    CITY, API_KEY);

    socket.send_all(http_cmd, sizeof(http_cmd));
    
    socket.receive_all(buffer, sizeof(buffer));
    printf("%s",buffer);
 
    socket.close();
    wizfi310.disconnect();
    
    printf("Done\r\n");

}




Caution

This example requires an API key that can be obtained by signning up to the openweathmap site. //

History

WizFi310 OpenWeatherMap Legacy version default tip

2017-04-19, by cliff1 [Wed, 19 Apr 2017 08:09:00 +0000] rev 1

WizFi310 OpenWeatherMap Legacy version


First release

2017-04-12, by cliff1 [Wed, 12 Apr 2017 01:12:07 +0000] rev 0

First release