WIZnet / Mbed 2 deprecated WizFi310_Legacy_AP_HelloWorld

WizFi310 AP HelloWorld Library 2.0 version

Dependencies:   WizFi310Interface_Legacy mbed

Homepage

Table of Contents

  1. Prerequisite
  2. Hardware Configuration
  3. Software
  4. Caution

Prerequisite

This example shows that WIZwiki-W7500 and WizFi310 operates as a AP.

To implement this function, you need a Platform board and Wi-Fi board. Below are what we used.

  • WIZwiki-W7500 from WIZnet (Platform board)
  • WizFi310 from WIZnet (Wi-Fi board)

Hardware Configuration

WIZwiki-W7500 Pin map

pin map

  • D0 is for RXD, D1 is for TXD
  • D6 is for CTS, D7 is for RTS
  • D9 is for RESET

WizFi310 Pin map

pin map

  • J1 is for RXD, J3 is for TXD
  • SW6-1 is connected to D6 for RTS, SW6-2 is connected to D7 for CTS
  • SW5-3 is connected to D9 for RESET

Software

Set an Address

main.cpp

wizfi310.setAddress("192.168.100.1","255.255.255.0","192.168.100.1");

Act as an AP

main.cpp

if ( wizfi310.connect(SECURE, SSID, PASS, WizFi310::WM_AP))      return -1;

Caution

Input a WizFi310's SSID that will be shown on Wi-Fi lists.

All wikipages