WIZnet
WizFi310 AP HelloWorld Library 2.0 version
Dependencies: WizFi310Interface_Legacy mbed
Prerequisite
This example shows that WIZwiki-W7500 and WizFi310 operates as a AP.
To implement this function, you need a Platform board and Wi-Fi board. Below are what we used.
- WIZwiki-W7500 from WIZnet (Platform board)
- WizFi310 from WIZnet (Wi-Fi board)
Hardware Configuration
WIZwiki-W7500 Pin map
- D0 is for RXD, D1 is for TXD
- D6 is for CTS, D7 is for RTS
- D9 is for RESET
WizFi310 Pin map
- J1 is for RXD, J3 is for TXD
- SW6-1 is connected to D6 for RTS, SW6-2 is connected to D7 for CTS
- SW5-3 is connected to D9 for RESET
Software
Set an Address
main.cpp
wizfi310.setAddress("192.168.100.1","255.255.255.0","192.168.100.1");
Act as an AP
main.cpp
if ( wizfi310.connect(SECURE, SSID, PASS, WizFi310::WM_AP)) return -1;
Caution
Input a WizFi310's SSID that will be shown on Wi-Fi lists.