Revision 0:8353b4dd38cc, committed 2015-01-18

Comitter:

pravinmagar

Date:

Sun Jan 18 04:58:44 2015 +0000

Commit message:

ftpput name array size modifed. ftpputname command time increased,few more small variations;

Changed in this revision

diff -r 000000000000 -r 8353b4dd38cc SDFileSystem.lib
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/SDFileSystem.lib	Sun Jan 18 04:58:44 2015 +0000
@@ -0,0 +1,1 @@
+http://developer.mbed.org/teams/Testbed/code/SDFileSystem/#7b35d1709458

diff -r 000000000000 -r 8353b4dd38cc main.cpp
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp	Sun Jan 18 04:58:44 2015 +0000
@@ -0,0 +1,642 @@
+#include "mbed.h"
+#include "SDFileSystem.h"
+#include "rtos.h"
+#define freq 1
+
+
+#define dur_sec 20
+
+Serial pc(USBTX, USBRX);
+Serial gsm(D1, D0); //tx,rx
+DigitalOut dtr(D2);
+DigitalOut pwr_key(D3);
+DigitalOut gsm_rst(D7);
+SDFileSystem sd(PTE3, PTE1, PTE2, PTE4, "sd"); // MOSI, MISO, SCK, CS
+AnalogIn AC_input(A0);
+AnalogIn DC_input(A2);
+AnalogIn TC_RLY(A3);
+AnalogIn TC_50(A4);
+AnalogIn TC_33(A5);
+
+
+union Data
+    {
+    unsigned short datai[50000];
+    char datac[100000];
+    };
+union Data ACdata;
+union Data DCdata;
+
+
+unsigned short TC33temp;
+unsigned short TC50temp;
+unsigned short TCRLtemp;
+
+char sitename[100] ="MODZ";
+char filename[100] = "";
+char filepath[100] = "";
+char timestamp[100]="";
+char timestampold[100]="";
+char main_dir[100] ="";
+char hour_dir[100] ="";
+char pathAC[100]   ="";
+char pathDC[100]   ="";
+char pathTC[100]   ="";
+char filenameAC[100]   ="";
+char filenameDC[100]   ="";
+char clk_response[100] ="";
+//char command[100] ="";
+//char result[100] ="";
+//char FTP_File_Name[100] ="";
+//char FTPPUT_File_Name[100] ="";
+//char FTP_Path_Name[100] ="";
+//char allfilename[100];
+//char mainfilename[100][100];
+int m=0,mfinal;
+int date, month, year, hour, minute, second, temp = 0;
+int c,i;
+int ns;
+unsigned long var = 0;
+unsigned long currentMillis = 0;
+uint8_t x=0,z=0,  answer=0;
+
+time_t previous;
+float tempC;
+uint32_t dataLength = dur_sec*freq*1000;
+osThreadId tid1,tid2,tid3,tid4,tid5,tid6;
+char ftpget[100];
+//char ftpfilenameac[100];
+//char ftppathac[100];
+int reset_time=120; //mins
+int gsmerr=0;
+
+//--------------------------------------------------------------------------------------------------//
+//                  Module reset                                                                    //
+//--------------------------------------------------------------------------------------------------//
+void reset_mod()
+{
+    //pc.printf("\r\nresetting module\n\n\n\r\n");
+    NVIC_SystemReset();     
+}
+//--------------------------------------------------------------------------------------------------//
+//                  Send AT Command (1 response)                                                    //
+//--------------------------------------------------------------------------------------------------//
+int8_t sendATcommand(char* ATcommand, char* expected_answer, unsigned int timeout, bool clk_flag)
+{
+    uint8_t x=0,answer=0;                                                                           //x=0 and answer=0, if not put, AT+CCLK?\r is not executed
+    char response[100];
+    memset(response, '\0', 100);                                                                    // Initialize the string
+    wait_ms(100);
+    while( gsm.readable() > 0) gsm.getc();                                                          // Clean the input buffer
+    gsm.printf("%s \r", ATcommand);                                                                 // Send the AT command 
+    x = 0;
+    previous = time(NULL);
+    do                                                                                              // this loop waits for the answer
+    { 
+        if(gsm.readable() != 0)
+        {    
+            response[x] = gsm.getc();                                                               // if there are data in the UART input buffer, reads it and checks for the asnwer 
+            pc.putc(response[x]);
+            x++;
+            if (strstr(response, expected_answer) != NULL)                                          // check if the desired answer  is in the response of the module
+            {
+                answer = 1;
+            } 
+        }
+    }
+    while((answer == 0) && ((time(NULL) - previous) < timeout));                                    // Waits for the asnwer with time out
+    //pc.printf("%s \r\n",response);  
+    if(clk_flag == 1)
+    {
+        sprintf(timestamp,response);                                                                //copies response to timestamp for further processing    }
+    }
+    return answer;
+}
+//--------------------------------------------------------------------------------------------------//
+//                  Send AT Command (2 response)                                                    //
+//--------------------------------------------------------------------------------------------------//
+int8_t sendATcommand2(char* ATcommand, char* expected_answer1,char* expected_answer2, unsigned int timeout)
+{
+    uint8_t x=0,  answer=0;
+    char response[100];
+    time_t previous;
+    memset(response, '\0', 100);                                                                    // Initialize the string
+    Thread::wait(100);
+    while( gsm.readable() != 0) gsm.getc();                                                         // Clean the input buffer
+    gsm.printf("%s \r", ATcommand);                                                                 // Send the AT command 
+    x = 0;
+    previous = time(NULL);
+    do                                                                                              // this loop waits for the answer
+    { 
+        if(gsm.readable() != 0)                                                                     // if there are data in the UART input buffer, reads it and checks for the asnwer
+        {
+            response[x] = gsm.getc();
+            pc.putc(response[x]);
+            sprintf(ftpget,"%s",response);
+            x++;
+            if (strstr(response, expected_answer1) != NULL)                                         // check if the desired answer 1 is in the response of the module
+            {
+                answer = 1;
+            }
+            if (strstr(response, expected_answer2) != NULL)                                         // check if the desired answer 2 is in the response of the module
+            {
+                answer = 2;
+                break;
+            }
+        }
+    }
+    while((answer == 0) && ((time(NULL) - previous) < timeout));                                    // Waits for the asnwer with time out
+    return answer;
+}
+
+//--------------------------------------------------------------------------------------------------//
+//                  Getting File Directories and names                                              //
+//--------------------------------------------------------------------------------------------------//   
+void GetFileDir()
+{
+    int attempt_cnt=0;
+    char month_dir[100]="";
+    char date_dir[100] ="";
+    sendATcommand("AT+CCLK?\r", "OK", 5,1);  
+    //sprintf(response,timestamp);
+    x=20;
+    year = 10*(timestamp[x+1]-48) + (timestamp[x+2]-48);
+    while(year!=14&&year!=15)
+    {
+        sendATcommand("AT+CCLK?\r", "OK", 5,1);  
+        //sprintf(response,timestamp);
+        year = 10*(timestamp[x+1]-48) + (timestamp[x+2]-48);
+        //pc.printf("\r\ncurrent timestamp %s\r\n",timestamp);
+        attempt_cnt++;
+        if(attempt_cnt>4) break; 
+    }
+    if(year==14||year==15)
+    {
+        if(timestamp!=timestampold)
+        {
+            sprintf(timestampold,timestamp);
+            //pc.printf("\r\nold time stamp is%s\r\n",timestampold);
+            month = (timestamp[x+4]-48)*10+(timestamp[x+5]-48);
+            date = (timestamp[x+7]-48)*10+(timestamp[x+8]-48);
+            hour = (timestamp[x+10]-48)*10+(timestamp[x+11]-48);
+            minute = (timestamp[x+13]-48)*10+(timestamp[x+14]-48);
+            second = (timestamp[x+16]-48)*10+(timestamp[x+17]-48); 
+            
+            sprintf(main_dir,"/sd/%s",sitename);
+            sprintf(month_dir,"%s/%s%02d%02d",main_dir,sitename,year,month);
+            sprintf(date_dir,"%s/%s%02d%02d%02d",month_dir,sitename,year,month,date);
+            sprintf(hour_dir,"%s/%s%02d%02d%02d%02d",date_dir,sitename,year,month,date,hour);
+            sprintf(filepath,"%s/%s%02d%02d%02d%02d%02d%02d",hour_dir,sitename,year,month,date,hour,minute,second);
+            sprintf(filename,"%s%02d%02d%02d%02d%02d%02d",sitename,year,month,date,hour,minute,second);
+            gsmerr=0;
+            mkdir(main_dir,0777);
+            mkdir(month_dir,0777);
+            mkdir(date_dir,0777);
+            mkdir(hour_dir,0777);
+        }
+        else
+        {
+            sprintf(filepath,"%s/%s%02d%02d%02d%02d%02d%02dErr%03d",hour_dir,sitename,year,month,date,hour,minute,second,gsmerr);
+            sprintf(filename,"%s%02d%02d%02d%02d%02d%02dErr%03d",sitename,year,month,date,hour,minute,second,gsmerr);
+            gsmerr++;
+        }
+    }
+    else
+    {
+        sprintf(timestamp,timestampold);
+        sprintf(filepath,"%s/%s%02d%02d%02d%02d%02d%02dErr%03d",hour_dir,sitename,year,month,date,hour,minute,second,gsmerr);
+        sprintf(filename,"%s%02d%02d%02d%02d%02d%02dErr%03d",sitename,year,month,date,hour,minute,second,gsmerr);
+        gsmerr++;
+    }
+}   
+
+//--------------------------------------------------------------------------------------------------//
+//                  Temperature Sampling                                                            //
+//--------------------------------------------------------------------------------------------------//
+void temp_val()
+{   
+    TC33temp=TC_33.read_u16();
+    TC50temp=TC_50.read_u16();
+    TCRLtemp=TC_RLY.read_u16();
+    
+}
+
+//--------------------------------------------------------------------------------------------------//
+//                  AC-DC Sampling                                                                  //
+//--------------------------------------------------------------------------------------------------//
+void calculate_ADC()
+{
+    Timer t;
+    unsigned long j=0;
+    //pc.printf("\n\rStarting Reading \n\r");
+    t.start();
+    while(j<dataLength)
+    {        
+        if((int)(t.read()*100*freq*1000)%100 == 0)
+        {
+            ACdata.datai[j] = AC_input.read_u16();
+            DCdata.datai[j] = DC_input.read_u16();
+            ++j;
+        }
+    }
+    t.stop();
+    //pc.printf("Time Taken %f \n\r", t.read());
+    t.reset();
+    //pc.printf("Total Samples %d\r\n",j);
+}
+//--------------------------------------------------------------------------------------------------//
+//                  Storage                                                                         //
+//--------------------------------------------------------------------------------------------------//
+void store(void const *args)
+{
+    tid3 = osThreadGetId();
+    //osThreadSetPriority(tid3, osPriorityHigh);
+    while(true)
+    {
+        osSignalWait(0x1, osWaitForever);
+        //pc.printf("\r\n%d is value of ns\r\n",ns);
+        switch (ns)
+        {
+            case 0:
+                GetFileDir();
+                sprintf(filenameAC,"%sAC.txt",filename);
+                sprintf(pathAC,"%sAC.txt",filepath);
+                pc.printf("\r\nFilename-AC\t%s", pathAC);
+                FILE *fp = fopen(pathAC, "w");
+                if(fp == NULL)
+                {
+                    //pc.printf("Could not open file for write\n\r");
+                    reset_mod();
+                }
+                else
+                {
+                    for(unsigned long k=0; k<dataLength; ++k)
+                    {
+                        if (k%4==0)
+                        {
+                            fprintf(fp,"\n\n");
+                        }
+                        fprintf(fp, "%c%c", ACdata.datac[2*k],ACdata.datac[2*k+1]);
+                    }
+                    fprintf(fp, "EOF");
+                    fclose(fp);
+                }
+                sprintf(filenameDC,"%sDC.txt",filename);
+                sprintf(pathDC,"%sDC.txt",filepath);
+                pc.printf("\r\nFilename-DC\t%s", pathDC);
+                FILE *fp1 = fopen(pathDC, "w");
+                if(fp1 == NULL)
+                {
+                    //pc.printf("Could not open file for write\n\r");
+                    reset_mod();
+                }
+                else
+                {
+                    for(unsigned long k=0; k<dataLength; ++k)
+                    {
+                        if (k%4==0)
+                        {
+                            fprintf(fp,"\n\n");
+                        }
+                        fprintf(fp1, "%c%c", DCdata.datac[2*k],DCdata.datac[2*k+1]);
+                    }
+                    fprintf(fp1, "EOF");
+                }
+                fclose(fp1);
+                sprintf(pathTC,"%sTC.txt",hour_dir);
+                //pc.printf("\r\nFilename-TC\t%s", pathTC);    
+                FILE *fp2 = fopen(pathTC, "a");
+                if(fp2 == NULL)
+                {
+                    //pc.printf("Could not open file for write\n\r");
+                    //reset_mod();
+                }
+                else
+                {
+                    for(unsigned long k=0; k<28; ++k)
+                    {
+                        fprintf(fp2, "\r\n3.3V-%d C",TC33temp);  
+                        fprintf(fp2, "\r\n5.0V-%d C",TC50temp);  
+                        fprintf(fp2, "\r\nRlay-%d C",TCRLtemp);           
+                        fprintf(fp2, ",");
+                    }
+                }
+                fclose(fp2);     
+                osSignalSet(tid6, 0x1);
+                break;
+
+            case 1:
+                sprintf(pathTC,"%sTC.txt",hour_dir);
+                //pc.printf("\r\nFilename-TC\t%s", pathTC);    
+                FILE *fp4 = fopen(pathTC, "a");
+                if(fp4 == NULL)
+                {
+                    //pc.printf("Could not open file for write\n\r");
+                    //reset_mod();
+                }
+                //fprintf(fp3, "\r\n20%d/%d%d/%d%d-%d%d:%d%d:%d%d",year,montht,monthu,datet,dateu,hourt,houru,minutet,minuteu,secondt,secondu);
+                else
+                {
+                    for(unsigned long k=0; k<28; ++k)
+                    {
+                        fprintf(fp4, "\r\n3.3V-%d C",TC33temp);
+                        fprintf(fp4, "\r\n5.0V-%d C",TC50temp);
+                        fprintf(fp4, "\r\nRlay-%d C",TCRLtemp);
+                        fprintf(fp4, ",");
+                    }
+                }
+                fclose(fp4);
+                break;
+        }
+    }
+}
+
+//--------------------------------------------------------------------------------------------------//
+//                 Sampling Function                                                                //
+//--------------------------------------------------------------------------------------------------//
+
+void sampling(void const *args)
+{
+    int smplngcnt=0;
+    tid1 = osThreadGetId();
+    //osThreadSetPriority(tid1, osPriorityRealtime);
+    //pc.printf("\r\nstarted sampling thread\r\n");
+    while(true)
+    {
+    if(smplngcnt%16==0)
+        {
+            pc.printf("AC sampling attempt");
+            if(smplngcnt>27) smplngcnt=0;
+            smplngcnt++;
+            ns=0;
+            calculate_ADC();
+            temp_val();
+            smplngcnt++;
+            osSignalSet(tid3, 0x1);
+        }
+    else
+        {
+            ns=1;
+            temp_val();
+            smplngcnt++;
+        }
+    Thread::wait(10000);
+    
+    }
+}
+
+//--------------------------------------------------------------------------------------------------//
+//                 Read Filenames from SD Card                                                      //
+//--------------------------------------------------------------------------------------------------//
+/*void read_ALLFILENames(void const *args)
+{
+        
+        while (true)
+        {
+                  
+        tid5 = osThreadGetId();
+        osSignalWait(0x1, osWaitForever);
+        //osThreadSetPriority(tid5, osPriorityBelowNormal);
+        pc.printf("\r\n reading names");
+        
+        FILE *fp = fopen("/sd/AllFileName.txt", "r");
+        while(!feof(fp))
+        {
+        //pc.putc("%c", fgetc(fp));
+        fscanf(fp,"%s",allfilename);
+        //pc.printf("\r\n%s",allfilename);
+        sprintf(mainfilename[m],allfilename);
+        m++;
+        //pc.printf("\n\r value of m=%d\n\r",m);
+    
+        }
+        fclose(fp);
+        mfinal=m;
+        //pc.printf("\n\rvalue of m=%d\r\n",mfinal);
+        for(m=0;m<mfinal/3;m++)
+        {
+        //pc.printf("\r\n%dpath\t%s",m,mainfilename[3*m]);
+        sprintf(ftppathac,"%s",mainfilename[3*m]);
+        //pc.printf("\r\n%dpath\t%s",m,mainfilename[3*m+1]);
+        sprintf(ftpfilenameac, "%s", filename[3*m+1]);
+        //pc.printf("\r\n%dpath\t%s",m,mainfilename[3*m+2]);
+        }
+        }
+}*/
+
+//--------------------------------------------------------------------------------------------------//
+//                 GSM Initialization                                                               //
+//--------------------------------------------------------------------------------------------------//
+void gsm_init()
+{
+    int cnt = 0;
+    while((sendATcommand("AT+CREG?", "+CREG: 1,1", 5, 0) || sendATcommand("AT+CREG?", "+CREG: 1,5", 5, 0)) == 0)
+    {
+        if(sendATcommand("AT+CREG=1", "+CREG:1", 5, 0))
+        {
+            pc.printf("creg is 1");
+            return;
+        }
+        else if(sendATcommand("AT+CREG=1", "+CREG:5", 5, 0))
+        {
+        pc.printf("creg is 5");
+        return;
+        }
+        //wait(2);
+        ++cnt;
+        //pc.printf("%d", cnt);
+        if(cnt == 4)
+        {
+            pc.printf("GSM registration failed");
+            return;
+        }
+    }
+}
+//--------------------------------------------------------------------------------------------------//
+//                 FTP Connect function                                                             //
+//--------------------------------------------------------------------------------------------------//
+bool ftp_connect()
+{  
+    int ftp_connect_attempt=0;
+    int ftp_close_attempt=0; 
+   // char command[50];
+   // char result[50];
+    if(sendATcommand("AT+SAPBR=2,1", "+SAPBR: 1,3,\"0.0.0.0\"", 5, 0))
+    {
+    }
+    else 
+    {
+        while(!sendATcommand("AT+SAPBR=2,1", "+SAPBR: 1,3,\"0.0.0.0\"", 5, 0))
+        {
+            sendATcommand("AT+SAPBR=0,1","OK",5, 0);
+            ftp_close_attempt++;
+            if(ftp_close_attempt>3)
+            {
+                return 0;
+            }
+        }
+    }
+    while(sendATcommand("AT+SAPBR=2,1", "+SAPBR: 1,3,\"0.0.0.0\"", 5, 0))
+    {
+        sendATcommand("AT+SAPBR=1,1", "OK", 5, 0);
+        ftp_connect_attempt++;
+        if(ftp_connect_attempt>6)
+        {
+            return 0;
+        }    //Connect to Bearer 1
+    }
+    
+    sendATcommand("AT+FTPTYPE=\"I\"", "OK", 5, 0);
+    sendATcommand("AT+FTPSERV=\"ftp.panchsheel.biz\"", "OK", 10, 0);
+    sendATcommand("AT+FTPUN=\"hardware@panchsheel.biz\"", "OK\r", 10, 0);
+    if(sendATcommand("AT+FTPPW=\"DAStest123\"", "OK\r", 10, 0)) return 1;
+    else return 0;
+    //sprintf(command,"%s%s", "AT+FTPPUTNAME=",filename);
+    //sprintf(result,"%s", "OK");
+    //sendATcommand(command,result, 5);       
+    //sendATcommand("AT+FTPPUTPATH=\"/\"", "OK", 5);
+    //if(sendATcommand("AT+FTPPUT=1\r", "+FTPPUT:1,1", 10)) return 1;
+    //else return 0;
+}
+
+//--------------------------------------------------------------------------------------------------//
+//                 FTP Send Function                                                                //
+//--------------------------------------------------------------------------------------------------//
+
+void ftp_put(bool ftp_type)
+{  
+    char ftpfilename[30]="";
+    char ftpfilepath[100]="";
+    if (ftp_type ==0)
+    {
+    sprintf(ftpfilename,"%s",filenameAC);
+   // pc.printf("\n %s",ftpfilename);
+   // pc.printf("\n %p",ftpfilename);
+    sprintf(ftpfilepath,"%s",pathAC);
+
+    }
+    else if (ftp_type ==1)
+    {
+    sprintf(ftpfilename,"%s",filenameDC);
+    sprintf(ftpfilepath,"%s",pathDC);
+    }
+    pc.printf("\r\nftp_put attempt\n\r");
+    char command1[40];
+    char result1[20];
+    // pc.printf("\n %p",ftpfilename);
+    sprintf(command1,"%s\"%s\"", "AT+FTPPUTNAME=", ftpfilename);
+  //  pc.printf("\n %p",command1);
+    sprintf(result1,"%s", "OK");
+    for(int putname_attempt=0; putname_attempt<3;putname_attempt++)
+    {
+      //  pc.printf("\n %p",ftpfilename);
+        if(sendATcommand(command1,result1, 10, 0))
+        {
+          //  pc.printf("\n %p",ftpfilename);
+            sendATcommand("AT+FTPPUTPATH=\"/Trial//\"", "OK", 5, 0);
+            //sendATcommand("AT+FTPPUT=1\r", "+FTPPUT:1,1", 10);
+            //pc.printf("\r\n%s\r\n",ftpfilepath);
+            //pc.printf("\r\n%s\r\n",ftpfilename); 
+           // unsigned long int cnt=0;
+            if(sendATcommand("AT+FTPPUT=1", "OK", 10, 0))
+            {
+                    pc.printf("in loop");
+                    pc.printf("\n\r %s",ftpfilepath);
+                    FILE *fp9 = fopen(ftpfilepath, "r");
+                    if(fp9==NULL)return;
+                    else
+                    {
+                        int trialcount=0;
+                        int allowedtrials=5;
+                        while(trialcount<allowedtrials)
+                        {
+                            if(sendATcommand("AT+FTPPUT=2,1000","+FTPPUT:2,1000", 10, 0))
+                            {
+                                trialcount=0;
+                                for(int i=0; i<1000; i++)
+                                {
+                                    gsm.printf("%c", fgetc(fp9));
+                                    
+                                }
+                                break;
+                            }
+                            else 
+                            {
+                                pc.printf("attempt %d failed",trialcount);
+                                trialcount++;
+                           }
+                        }
+                       
+                        fclose(fp9);
+                    }
+                   
+                    for(int ftp_close_attempt=0; ftp_close_attempt<5; ftp_close_attempt++)
+                    {
+                        if(sendATcommand("AT+FTPPUT=2,0", "OK", 5, 0)) 
+                        {
+                            ftp_close_attempt=6;
+                        }
+                    }
+                    return;
+                //}
+               
+            }
+            return;
+        }
+    }
+    pc.printf("\n\r %s\n\r","i am not able to send data");
+}
+
+//--------------------------------------------------------------------------------------------------//
+//                 FTP Function Thread                                                              //
+//--------------------------------------------------------------------------------------------------//
+
+void FTP_Fun(void const *args)
+{
+    tid6 = osThreadGetId();
+        
+    while(true)
+    {
+        osSignalWait(0x1, osWaitForever);
+        //osThreadSetPriority(tid6, osPriorityLow);
+        
+        if(ftp_connect())
+        {
+            //char ACfilename[100],DCfilename[100], TCfilename[100];
+            //sprintf(ACfilename,"%sAC",filename);
+            //sprintf(DCfilename,"%sDC",filename);
+            //sprintf(TCfilename,"%s%02d%02d%02d%03dTC.txt",sitename,year,month,date,hour);
+            ftp_put(0);
+            ftp_put(1);
+            //ftp_put(3,pathTC,TCfilename);
+        }
+    }
+}
+//--------------------------------------------------------------------------------------------------//
+//                 Main Function                                                                    //
+//--------------------------------------------------------------------------------------------------//
+int main()
+{
+    //mkdir("/sd/strtup", 0777);
+    gsm_rst=1;
+    wait(5);
+    //pc.printf("Hello\r\n");
+    //gsm_init();
+    //wait(2);
+    gsm.baud(115200);
+    pc.baud(115200);
+    Thread thread1(sampling);
+    Thread thread3(store);
+    //Thread thread4(SDError);
+    //Thread thread5(read_ALLFILENames);
+    Thread thread6(FTP_Fun);
+    while(true)
+    {
+        for (int f=0; f<reset_time; f++)//reset after 60 min
+        {
+            Thread::wait(60000);
+        }
+        reset_mod();       
+    //osSignalSet(tid2, 0x1);
+    }    
+}
\ No newline at end of file

diff -r 000000000000 -r 8353b4dd38cc mbed-rtos.lib
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed-rtos.lib	Sun Jan 18 04:58:44 2015 +0000
@@ -0,0 +1,1 @@
+http://mbed.org/users/mbed_official/code/mbed-rtos/#318e02f48146

diff -r 000000000000 -r 8353b4dd38cc mbed.bld
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed.bld	Sun Jan 18 04:58:44 2015 +0000
@@ -0,0 +1,1 @@
+http://mbed.org/users/mbed_official/code/mbed/builds/4fc01daae5a5
\ No newline at end of file