stm32l4xx_hal_conf.h

00001 /**
00002   ******************************************************************************
00003   * @file    stm32l4xx_hal_conf.h
00004   * @author  MCD Application Team
00005   * @version V1.5.1
00006   * @date    31-May-2016
00007   * @brief   HAL configuration file.
00008   ******************************************************************************
00009   * @attention
00010   *
00011   * <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
00012   *
00013   * Redistribution and use in source and binary forms, with or without modification,
00014   * are permitted provided that the following conditions are met:
00015   *   1. Redistributions of source code must retain the above copyright notice,
00016   *      this list of conditions and the following disclaimer.
00017   *   2. Redistributions in binary form must reproduce the above copyright notice,
00018   *      this list of conditions and the following disclaimer in the documentation
00019   *      and/or other materials provided with the distribution.
00020   *   3. Neither the name of STMicroelectronics nor the names of its contributors
00021   *      may be used to endorse or promote products derived from this software
00022   *      without specific prior written permission.
00023   *
00024   * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
00025   * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
00026   * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
00027   * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
00028   * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
00029   * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
00030   * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
00031   * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
00032   * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
00033   * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
00034   *
00035   ******************************************************************************
00036   */
00037 
00038 /* Define to prevent recursive inclusion -------------------------------------*/
00039 #ifndef __STM32L4xx_HAL_CONF_H
00040 #define __STM32L4xx_HAL_CONF_H
00041 
00042 #ifdef __cplusplus
00043  extern "C" {
00044 #endif
00045 
00046 /* Exported types ------------------------------------------------------------*/
00047 /* Exported constants --------------------------------------------------------*/
00048 
00049 /* ########################## Module Selection ############################## */
00050 /**
00051   * @brief This is the list of modules to be used in the HAL driver
00052   */
00053 #define HAL_MODULE_ENABLED
00054 #define HAL_ADC_MODULE_ENABLED
00055 #define HAL_CAN_MODULE_ENABLED
00056 #define HAL_COMP_MODULE_ENABLED
00057 #define HAL_CORTEX_MODULE_ENABLED
00058 #define HAL_CRC_MODULE_ENABLED
00059 #define HAL_CRYP_MODULE_ENABLED
00060 #define HAL_DAC_MODULE_ENABLED
00061 #define HAL_DFSDM_MODULE_ENABLED
00062 #define HAL_DMA_MODULE_ENABLED
00063 #define HAL_FIREWALL_MODULE_ENABLED
00064 #define HAL_FLASH_MODULE_ENABLED
00065 #define HAL_HCD_MODULE_ENABLED
00066 #define HAL_NAND_MODULE_ENABLED
00067 #define HAL_NOR_MODULE_ENABLED
00068 #define HAL_SRAM_MODULE_ENABLED
00069 #define HAL_GPIO_MODULE_ENABLED
00070 #define HAL_I2C_MODULE_ENABLED
00071 #define HAL_IRDA_MODULE_ENABLED
00072 #define HAL_IWDG_MODULE_ENABLED
00073 #define HAL_LCD_MODULE_ENABLED
00074 #define HAL_LPTIM_MODULE_ENABLED
00075 #define HAL_OPAMP_MODULE_ENABLED
00076 #define HAL_PCD_MODULE_ENABLED
00077 #define HAL_PWR_MODULE_ENABLED
00078 #define HAL_QSPI_MODULE_ENABLED
00079 #define HAL_RCC_MODULE_ENABLED
00080 #define HAL_RNG_MODULE_ENABLED
00081 #define HAL_RTC_MODULE_ENABLED
00082 #define HAL_SAI_MODULE_ENABLED
00083 #define HAL_SD_MODULE_ENABLED
00084 #define HAL_SMARTCARD_MODULE_ENABLED
00085 #define HAL_SMBUS_MODULE_ENABLED
00086 #define HAL_SPI_MODULE_ENABLED
00087 #define HAL_SWPMI_MODULE_ENABLED
00088 #define HAL_TIM_MODULE_ENABLED
00089 #define HAL_TSC_MODULE_ENABLED
00090 #define HAL_UART_MODULE_ENABLED
00091 #define HAL_USART_MODULE_ENABLED
00092 #define HAL_WWDG_MODULE_ENABLED
00093 
00094 
00095 /* ########################## Oscillator Values adaptation ####################*/
00096 /**
00097   * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
00098   *        This value is used by the RCC HAL module to compute the system frequency
00099   *        (when HSE is used as system clock source, directly or through the PLL).
00100   */
00101 #if !defined  (HSE_VALUE)
00102   #define HSE_VALUE    ((uint32_t)8000000U) /*!< Value of the External oscillator in Hz */
00103 #endif /* HSE_VALUE */
00104 
00105 #if !defined  (HSE_STARTUP_TIMEOUT)
00106   #define HSE_STARTUP_TIMEOUT    ((uint32_t)200U)   /*!< Time out for HSE start up, in ms */
00107 #endif /* HSE_STARTUP_TIMEOUT */
00108 
00109 /**
00110   * @brief Internal Multiple Speed oscillator (MSI) default value.
00111   *        This value is the default MSI range value after Reset.
00112   */
00113 #if !defined  (MSI_VALUE)
00114   #define MSI_VALUE    ((uint32_t)4000000U) /*!< Value of the Internal oscillator in Hz*/
00115 #endif /* MSI_VALUE */
00116 
00117 /**
00118   * @brief Internal High Speed oscillator (HSI) value.
00119   *        This value is used by the RCC HAL module to compute the system frequency
00120   *        (when HSI is used as system clock source, directly or through the PLL).
00121   */
00122 #if !defined  (HSI_VALUE)
00123   #define HSI_VALUE    ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/
00124 #endif /* HSI_VALUE */
00125 
00126 /**
00127   * @brief Internal High Speed oscillator (HSI48) value for USB FS, SDMMC and RNG.
00128   *        This internal oscillator is mainly dedicated to provide a high precision clock to
00129   *        the USB peripheral by means of a special Clock Recovery System (CRS) circuitry.
00130   *        When the CRS is not used, the HSI48 RC oscillator runs on it default frequency
00131   *        which is subject to manufacturing process variations.
00132   */
00133 #if !defined  (HSI48_VALUE) 
00134  #define HSI48_VALUE   ((uint32_t)48000000U) /*!< Value of the Internal High Speed oscillator for USB FS/SDMMC/RNG in Hz.
00135                                               The real value my vary depending on manufacturing process variations.*/
00136 #endif /* HSI48_VALUE */
00137 
00138 /**
00139   * @brief Internal Low Speed oscillator (LSI) value.
00140   */
00141 #if !defined  (LSI_VALUE) 
00142  #define LSI_VALUE  ((uint32_t)32000U)      /*!< LSI Typical Value in Hz*/
00143 #endif /* LSI_VALUE */                      /*!< Value of the Internal Low Speed oscillator in Hz
00144                                              The real value may vary depending on the variations
00145                                              in voltage and temperature.*/
00146 /**
00147   * @brief External Low Speed oscillator (LSE) value.
00148   *        This value is used by the UART, RTC HAL module to compute the system frequency
00149   */
00150 #if !defined  (LSE_VALUE)
00151   #define LSE_VALUE    ((uint32_t)32768U) /*!< Value of the External oscillator in Hz*/
00152 #endif /* LSE_VALUE */
00153 
00154 #if !defined  (LSE_STARTUP_TIMEOUT)
00155   #define LSE_STARTUP_TIMEOUT    ((uint32_t)5000U)  /*!< Time out for LSE start up, in ms */
00156 #endif /* HSE_STARTUP_TIMEOUT */
00157 
00158 /**
00159   * @brief External clock source for SAI1 peripheral
00160   *        This value is used by the RCC HAL module to compute the SAI1 & SAI2 clock source 
00161   *        frequency.
00162   */
00163 #if !defined  (EXTERNAL_SAI1_CLOCK_VALUE)
00164   #define EXTERNAL_SAI1_CLOCK_VALUE    ((uint32_t)48000U) /*!< Value of the SAI1 External clock source in Hz*/
00165 #endif /* EXTERNAL_SAI1_CLOCK_VALUE */
00166 
00167 /**
00168   * @brief External clock source for SAI2 peripheral
00169   *        This value is used by the RCC HAL module to compute the SAI1 & SAI2 clock source 
00170   *        frequency.
00171   */
00172 #if !defined  (EXTERNAL_SAI2_CLOCK_VALUE)
00173   #define EXTERNAL_SAI2_CLOCK_VALUE    ((uint32_t)48000U) /*!< Value of the SAI2 External clock source in Hz*/
00174 #endif /* EXTERNAL_SAI2_CLOCK_VALUE */
00175 
00176 /* Tip: To avoid modifying this file each time you need to use different HSE,
00177    ===  you can define the HSE value in your toolchain compiler preprocessor. */
00178 
00179 /* ########################### System Configuration ######################### */
00180 /**
00181   * @brief This is the HAL system configuration section
00182   */
00183 #define  VDD_VALUE                    ((uint32_t)3300U) /*!< Value of VDD in mv */
00184 #define  TICK_INT_PRIORITY            ((uint32_t)0x0FU) /*!< tick interrupt priority */
00185 #define  USE_RTOS                     0
00186 #define  PREFETCH_ENABLE              0
00187 #define  INSTRUCTION_CACHE_ENABLE     1
00188 #define  DATA_CACHE_ENABLE            1
00189 
00190 /* ########################## Assert Selection ############################## */
00191 /**
00192   * @brief Uncomment the line below to expanse the "assert_param" macro in the
00193   *        HAL drivers code
00194   */
00195 /* #define USE_FULL_ASSERT    1 */
00196 
00197 /* Includes ------------------------------------------------------------------*/
00198 /**
00199   * @brief Include module's header file
00200   */
00201 
00202 #ifdef HAL_RCC_MODULE_ENABLED
00203   #include "stm32l4xx_hal_rcc.h"
00204 #endif /* HAL_RCC_MODULE_ENABLED */
00205 
00206 #ifdef HAL_GPIO_MODULE_ENABLED
00207   #include "stm32l4xx_hal_gpio.h"
00208 #endif /* HAL_GPIO_MODULE_ENABLED */
00209 
00210 #ifdef HAL_DMA_MODULE_ENABLED
00211   #include "stm32l4xx_hal_dma.h"
00212 #endif /* HAL_DMA_MODULE_ENABLED */
00213 
00214 #ifdef HAL_DFSDM_MODULE_ENABLED
00215   #include "stm32l4xx_hal_dfsdm.h"
00216 #endif /* HAL_DFSDM_MODULE_ENABLED */
00217 
00218 #ifdef HAL_CORTEX_MODULE_ENABLED
00219   #include "stm32l4xx_hal_cortex.h"
00220 #endif /* HAL_CORTEX_MODULE_ENABLED */
00221 
00222 #ifdef HAL_ADC_MODULE_ENABLED
00223   #include "stm32l4xx_hal_adc.h"
00224 #endif /* HAL_ADC_MODULE_ENABLED */
00225 
00226 #ifdef HAL_CAN_MODULE_ENABLED
00227   #include "stm32l4xx_hal_can.h"
00228 #endif /* HAL_CAN_MODULE_ENABLED */
00229 
00230 #ifdef HAL_COMP_MODULE_ENABLED
00231   #include "stm32l4xx_hal_comp.h"
00232 #endif /* HAL_COMP_MODULE_ENABLED */
00233 
00234 #ifdef HAL_CRC_MODULE_ENABLED
00235   #include "stm32l4xx_hal_crc.h"
00236 #endif /* HAL_CRC_MODULE_ENABLED */
00237 
00238 #ifdef HAL_CRYP_MODULE_ENABLED
00239   #include "stm32l4xx_hal_cryp.h"
00240 #endif /* HAL_CRYP_MODULE_ENABLED */
00241 
00242 #ifdef HAL_DAC_MODULE_ENABLED
00243   #include "stm32l4xx_hal_dac.h"
00244 #endif /* HAL_DAC_MODULE_ENABLED */
00245 
00246 #ifdef HAL_FIREWALL_MODULE_ENABLED
00247   #include "stm32l4xx_hal_firewall.h"
00248 #endif /* HAL_FIREWALL_MODULE_ENABLED */
00249 
00250 #ifdef HAL_FLASH_MODULE_ENABLED
00251   #include "stm32l4xx_hal_flash.h"
00252 #endif /* HAL_FLASH_MODULE_ENABLED */
00253 
00254 #ifdef HAL_SRAM_MODULE_ENABLED
00255   #include "stm32l4xx_hal_sram.h"
00256 #endif /* HAL_SRAM_MODULE_ENABLED */
00257 
00258 #ifdef HAL_NOR_MODULE_ENABLED
00259   #include "stm32l4xx_hal_nor.h"
00260 #endif /* HAL_NOR_MODULE_ENABLED */
00261 
00262 #ifdef HAL_NAND_MODULE_ENABLED
00263   #include "stm32l4xx_hal_nand.h"
00264 #endif /* HAL_NAND_MODULE_ENABLED */
00265 
00266 #ifdef HAL_I2C_MODULE_ENABLED
00267  #include "stm32l4xx_hal_i2c.h"
00268 #endif /* HAL_I2C_MODULE_ENABLED */
00269 
00270 #ifdef HAL_IWDG_MODULE_ENABLED
00271  #include "stm32l4xx_hal_iwdg.h"
00272 #endif /* HAL_IWDG_MODULE_ENABLED */
00273 
00274 #ifdef HAL_LCD_MODULE_ENABLED
00275  #include "stm32l4xx_hal_lcd.h"
00276 #endif /* HAL_LCD_MODULE_ENABLED */
00277 
00278 #ifdef HAL_LPTIM_MODULE_ENABLED
00279 #include "stm32l4xx_hal_lptim.h"
00280 #endif /* HAL_LPTIM_MODULE_ENABLED */
00281 
00282 #ifdef HAL_OPAMP_MODULE_ENABLED
00283 #include "stm32l4xx_hal_opamp.h"
00284 #endif /* HAL_OPAMP_MODULE_ENABLED */
00285 
00286 #ifdef HAL_PWR_MODULE_ENABLED
00287  #include "stm32l4xx_hal_pwr.h"
00288 #endif /* HAL_PWR_MODULE_ENABLED */
00289 
00290 #ifdef HAL_QSPI_MODULE_ENABLED
00291  #include "stm32l4xx_hal_qspi.h"
00292 #endif /* HAL_QSPI_MODULE_ENABLED */
00293 
00294 #ifdef HAL_RNG_MODULE_ENABLED
00295  #include "stm32l4xx_hal_rng.h"
00296 #endif /* HAL_RNG_MODULE_ENABLED */
00297 
00298 #ifdef HAL_RTC_MODULE_ENABLED
00299  #include "stm32l4xx_hal_rtc.h"
00300 #endif /* HAL_RTC_MODULE_ENABLED */
00301 
00302 #ifdef HAL_SAI_MODULE_ENABLED
00303  #include "stm32l4xx_hal_sai.h"
00304 #endif /* HAL_SAI_MODULE_ENABLED */
00305 
00306 #ifdef HAL_SD_MODULE_ENABLED
00307  #include "stm32l4xx_hal_sd.h"
00308 #endif /* HAL_SD_MODULE_ENABLED */
00309 
00310 #ifdef HAL_SMBUS_MODULE_ENABLED
00311  #include "stm32l4xx_hal_smbus.h"
00312 #endif /* HAL_SMBUS_MODULE_ENABLED */
00313 
00314 #ifdef HAL_SPI_MODULE_ENABLED
00315  #include "stm32l4xx_hal_spi.h"
00316 #endif /* HAL_SPI_MODULE_ENABLED */
00317 
00318 #ifdef HAL_SWPMI_MODULE_ENABLED
00319  #include "stm32l4xx_hal_swpmi.h"
00320 #endif /* HAL_SWPMI_MODULE_ENABLED */
00321 
00322 #ifdef HAL_TIM_MODULE_ENABLED
00323  #include "stm32l4xx_hal_tim.h"
00324 #endif /* HAL_TIM_MODULE_ENABLED */
00325 
00326 #ifdef HAL_TSC_MODULE_ENABLED
00327  #include "stm32l4xx_hal_tsc.h"
00328 #endif /* HAL_TSC_MODULE_ENABLED */
00329 
00330 #ifdef HAL_UART_MODULE_ENABLED
00331  #include "stm32l4xx_hal_uart.h"
00332 #endif /* HAL_UART_MODULE_ENABLED */
00333 
00334 #ifdef HAL_USART_MODULE_ENABLED
00335  #include "stm32l4xx_hal_usart.h"
00336 #endif /* HAL_USART_MODULE_ENABLED */
00337 
00338 #ifdef HAL_IRDA_MODULE_ENABLED
00339  #include "stm32l4xx_hal_irda.h"
00340 #endif /* HAL_IRDA_MODULE_ENABLED */
00341 
00342 #ifdef HAL_SMARTCARD_MODULE_ENABLED
00343  #include "stm32l4xx_hal_smartcard.h"
00344 #endif /* HAL_SMARTCARD_MODULE_ENABLED */
00345 
00346 #ifdef HAL_WWDG_MODULE_ENABLED
00347  #include "stm32l4xx_hal_wwdg.h"
00348 #endif /* HAL_WWDG_MODULE_ENABLED */
00349 
00350 #ifdef HAL_PCD_MODULE_ENABLED
00351  #include "stm32l4xx_hal_pcd.h"
00352 #endif /* HAL_PCD_MODULE_ENABLED */
00353 
00354 #ifdef HAL_HCD_MODULE_ENABLED
00355  #include "stm32l4xx_hal_hcd.h"
00356 #endif /* HAL_HCD_MODULE_ENABLED */
00357 
00358 /* Exported macro ------------------------------------------------------------*/
00359 #ifdef  USE_FULL_ASSERT
00360 /**
00361   * @brief  The assert_param macro is used for function's parameters check.
00362   * @param  expr: If expr is false, it calls assert_failed function
00363   *         which reports the name of the source file and the source
00364   *         line number of the call that failed.
00365   *         If expr is true, it returns no value.
00366   * @retval None
00367   */
00368   #include "mbed_assert.h"
00369   #define assert_param(expr) MBED_ASSERT(expr)
00370 #else
00371   #define assert_param(expr) ((void)0U)
00372 #endif /* USE_FULL_ASSERT */
00373 
00374 #ifdef __cplusplus
00375 }
00376 #endif
00377 
00378 #endif /* __STM32L4xx_HAL_CONF_H */
00379 
00380 
00381 /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/