TUKS MCU Introductory course / TUKS-COURSE-THERMOMETER

Fork of TUKS-COURSE-TIMER by TUKS MCU Introductory course

Embed: (wiki syntax)

« Back to documentation index

lsm303c.c File Reference

lsm303c.c File Reference

This file provides a set of functions needed to manage the LSM303C MEMS accelerometer. More...

Go to the source code of this file.

Functions

void LSM303C_AccInit (uint16_t InitStruct)
 Set LSM303C Accelerometer Initialization.
void LSM303C_AccDeInit (void)
 LSM303C Accelerometer De-initialization.
uint8_t LSM303C_AccReadID (void)
 Read LSM303C ID.
void LSM303C_AccLowPower (void)
 Put Accelerometer in power down mode.
void LSM303C_AccFilterConfig (uint8_t FilterStruct)
 Set High Pass Filter Modality.
void LSM303C_AccReadXYZ (int16_t *pData)
 Read X, Y & Z Acceleration values.
void LSM303C_MagInit (MAGNETO_InitTypeDef LSM303C_InitStruct)
 Set LSM303C Magnetometer Initialization.
void LSM303C_MagDeInit (void)
 LSM303C Magnetometer De-initialization.
uint8_t LSM303C_MagReadID (void)
 Read LSM303C ID.
void LSM303C_MagLowPower (void)
 Put Magnetometer in power down mode.
void LSM303C_MagReadXYZ (int16_t *pData)
 Read X, Y & Z Magnetometer values.
uint8_t LSM303C_MagGetDataStatus (void)
 Get status for Mag LSM303C data.
void ACCELERO_IO_Init (void)
 Configures COMPASS/ACCELEROMETER io interface.
void ACCELERO_IO_ITConfig (void)
 Configures COMPASS / ACCELERO click IT.
void ACCELERO_IO_Write (uint8_t RegisterAddr, uint8_t Value)
 Writes one byte to the COMPASS / ACCELEROMETER.
uint8_t ACCELERO_IO_Read (uint8_t RegisterAddr)
 Reads a block of data from the COMPASS / ACCELEROMETER.
void MAGNETO_IO_Init (void)
 Configures COMPASS/MAGNETO SPI interface.
void MAGNETO_IO_Write (uint8_t RegisterAddr, uint8_t Value)
 Writes one byte to the COMPASS/MAGNETO.
uint8_t MAGNETO_IO_Read (uint8_t RegisterAddr)
 Reads a block of data from the COMPASS/MAGNETO.

Detailed Description

This file provides a set of functions needed to manage the LSM303C MEMS accelerometer.

Author:
MCD Application Team
Version:
V1.0.0
Date:
24-June-2015
Attention:

© COPYRIGHT(c) 2015 STMicroelectronics

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. Neither the name of STMicroelectronics nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Definition in file lsm303c.c.