TUKS MCU Introductory course
/
TUKS-COURSE-THERMOMETER
Important changes to repositories hosted on mbed.com
Mbed hosted mercurial repositories are deprecated and are due to be permanently deleted in July 2026.
To keep a copy of this software download the repository Zip archive or clone locally using Mercurial.
It is also possible to export all your personal repositories from the account settings page.
Fork of
TUKS-COURSE-TIMER
by 
TUKS MCU Introductory course
Revision 3:b69e098b4613, committed 2017-02-25
- Comitter:
- elmot
- Date:
- Sat Feb 25 09:03:15 2017 +0000
- Parent:
- 2:5acdd8565d02
- Commit message:
- Ready
Changed in this revision
--- a/BSP_DISCO_L476VG/stm32l476g_discovery_glass_lcd.c Sat Feb 25 00:23:53 2017 +0000
+++ b/BSP_DISCO_L476VG/stm32l476g_discovery_glass_lcd.c Sat Feb 25 09:03:15 2017 +0000
@@ -749,7 +749,7 @@
ch = C_NMAP;
break;
- case 'µ' :
+ case '&' :
ch = C_UMAP;
break;
@@ -765,7 +765,7 @@
ch = C_SLATCH;
break;
- case '°' :
+ case '~' :
ch = C_PERCENT_1;
break;
case '%' :
--- a/HAL_L476/stm32l4xx_hal_rtc_ex.h Sat Feb 25 00:23:53 2017 +0000
+++ b/HAL_L476/stm32l4xx_hal_rtc_ex.h Sat Feb 25 09:03:15 2017 +0000
@@ -33,90 +33,89 @@
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
- */
+ */
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32L4xx_HAL_RTC_EX_H
#define __STM32L4xx_HAL_RTC_EX_H
#ifdef __cplusplus
- extern "C" {
+extern "C" {
#endif
-/* Includes ------------------------------------------------------------------*/
+ /* Includes ------------------------------------------------------------------*/
#include "stm32l4xx_hal_def.h"
-/** @addtogroup STM32L4xx_HAL_Driver
- * @{
- */
+ /** @addtogroup STM32L4xx_HAL_Driver
+ * @{
+ */
-/** @addtogroup RTCEx
- * @{
- */
+ /** @addtogroup RTCEx
+ * @{
+ */
-/* Exported types ------------------------------------------------------------*/
-/** @defgroup RTCEx_Exported_Types RTCEx Exported Types
- * @{
- */
-/**
- * @brief RTC Tamper structure definition
- */
-typedef struct
-{
- uint32_t Tamper; /*!< Specifies the Tamper Pin.
+ /* Exported types ------------------------------------------------------------*/
+ /** @defgroup RTCEx_Exported_Types RTCEx Exported Types
+ * @{
+ */
+ /**
+ * @brief RTC Tamper structure definition
+ */
+ typedef struct {
+ uint32_t Tamper; /*!< Specifies the Tamper Pin.
This parameter can be a value of @ref RTCEx_Tamper_Pins_Definitions */
- uint32_t Interrupt; /*!< Specifies the Tamper Interrupt.
+ uint32_t Interrupt; /*!< Specifies the Tamper Interrupt.
This parameter can be a value of @ref RTCEx_Tamper_Interrupt_Definitions */
- uint32_t Trigger; /*!< Specifies the Tamper Trigger.
+ uint32_t Trigger; /*!< Specifies the Tamper Trigger.
This parameter can be a value of @ref RTCEx_Tamper_Trigger_Definitions */
- uint32_t NoErase; /*!< Specifies the Tamper no erase mode.
+ uint32_t NoErase; /*!< Specifies the Tamper no erase mode.
This parameter can be a value of @ref RTCEx_Tamper_EraseBackUp_Definitions */
- uint32_t MaskFlag; /*!< Specifies the Tamper Flag masking.
+ uint32_t MaskFlag; /*!< Specifies the Tamper Flag masking.
This parameter can be a value of @ref RTCEx_Tamper_MaskFlag_Definitions */
- uint32_t Filter; /*!< Specifies the RTC Filter Tamper.
+ uint32_t Filter; /*!< Specifies the RTC Filter Tamper.
This parameter can be a value of @ref RTCEx_Tamper_Filter_Definitions */
- uint32_t SamplingFrequency; /*!< Specifies the sampling frequency.
+ uint32_t SamplingFrequency; /*!< Specifies the sampling frequency.
This parameter can be a value of @ref RTCEx_Tamper_Sampling_Frequencies_Definitions */
- uint32_t PrechargeDuration; /*!< Specifies the Precharge Duration .
+ uint32_t PrechargeDuration; /*!< Specifies the Precharge Duration .
This parameter can be a value of @ref RTCEx_Tamper_Pin_Precharge_Duration_Definitions */
- uint32_t TamperPullUp; /*!< Specifies the Tamper PullUp .
+ uint32_t TamperPullUp; /*!< Specifies the Tamper PullUp .
This parameter can be a value of @ref RTCEx_Tamper_Pull_UP_Definitions */
- uint32_t TimeStampOnTamperDetection; /*!< Specifies the TimeStampOnTamperDetection.
+ uint32_t TimeStampOnTamperDetection; /*!< Specifies the TimeStampOnTamperDetection.
This parameter can be a value of @ref RTCEx_Tamper_TimeStampOnTamperDetection_Definitions */
-}RTC_TamperTypeDef;
+ } RTC_TamperTypeDef;
-/**
- * @}
- */
+ /**
+ * @}
+ */
-/* Exported constants --------------------------------------------------------*/
-/** @defgroup RTCEx_Exported_Constants RTCEx Exported Constants
- * @{
- */
+ /* Exported constants --------------------------------------------------------*/
+ /** @defgroup RTCEx_Exported_Constants RTCEx Exported Constants
+ * @{
+ */
-/** @defgroup RTCEx_Output_selection_Definitions RTC Output Selection Definitions
- * @{
- */
+ /** @defgroup RTCEx_Output_selection_Definitions RTC Output Selection Definitions
+ * @{
+ */
#define RTC_OUTPUT_DISABLE ((uint32_t)0x00000000)
#define RTC_OUTPUT_ALARMA ((uint32_t)0x00200000)
#define RTC_OUTPUT_ALARMB ((uint32_t)0x00400000)
#define RTC_OUTPUT_WAKEUP ((uint32_t)0x00600000)
-/**
- * @}
- */
+ /**
+ * @}
+ */
-/** @defgroup RTCEx_Backup_Registers_Definitions RTC Backup Registers Definitions
- * @{
- */
+ /** @defgroup RTCEx_Backup_Registers_Definitions RTC Backup Registers Definitions
+ * @{
+ */
#define RTC_BKP_DR0 ((uint32_t)0x00000000)
#define RTC_BKP_DR1 ((uint32_t)0x00000001)
#define RTC_BKP_DR2 ((uint32_t)0x00000002)
@@ -149,30 +148,30 @@
#define RTC_BKP_DR29 ((uint32_t)0x0000001D)
#define RTC_BKP_DR30 ((uint32_t)0x0000001E)
#define RTC_BKP_DR31 ((uint32_t)0x0000001F)
-/**
- * @}
- */
+ /**
+ * @}
+ */
-/** @defgroup RTCEx_TimeStamp_Edges_definitions RTC TimeStamp Edges Definitions
- * @{
- */
+ /** @defgroup RTCEx_TimeStamp_Edges_definitions RTC TimeStamp Edges Definitions
+ * @{
+ */
#define RTC_TIMESTAMPEDGE_RISING ((uint32_t)0x00000000)
#define RTC_TIMESTAMPEDGE_FALLING ((uint32_t)0x00000008)
-/**
- * @}
- */
+ /**
+ * @}
+ */
-/** @defgroup RTCEx_TimeStamp_Pin_Selection RTC TimeStamp Pins Selection
- * @{
- */
+ /** @defgroup RTCEx_TimeStamp_Pin_Selection RTC TimeStamp Pins Selection
+ * @{
+ */
#define RTC_TIMESTAMPPIN_DEFAULT ((uint32_t)0x00000000)
-/**
- * @}
- */
+ /**
+ * @}
+ */
-/** @defgroup RTCEx_Tamper_Pins_Definitions RTC Tamper Pins Definitions
- * @{
- */
+ /** @defgroup RTCEx_Tamper_Pins_Definitions RTC Tamper Pins Definitions
+ * @{
+ */
#if defined(RTC_TAMPER1_SUPPORT)
#define RTC_TAMPER_1 RTC_TAMPCR_TAMP1E
#endif /* RTC_TAMPER1_SUPPORT */
@@ -180,13 +179,13 @@
#if defined(RTC_TAMPER3_SUPPORT)
#define RTC_TAMPER_3 RTC_TAMPCR_TAMP3E
#endif /* RTC_TAMPER3_SUPPORT */
-/**
- * @}
- */
+ /**
+ * @}
+ */
-/** @defgroup RTCEx_Tamper_Interrupt_Definitions RTC Tamper Interrupts Definitions
- * @{
- */
+ /** @defgroup RTCEx_Tamper_Interrupt_Definitions RTC Tamper Interrupts Definitions
+ * @{
+ */
#if defined(RTC_TAMPER1_SUPPORT)
#define RTC_TAMPER1_INTERRUPT RTC_TAMPCR_TAMP1IE
#endif /* RTC_TAMPER1_SUPPORT */
@@ -195,332 +194,332 @@
#define RTC_TAMPER3_INTERRUPT RTC_TAMPCR_TAMP3IE
#endif /* RTC_TAMPER3_SUPPORT */
#define RTC_ALL_TAMPER_INTERRUPT RTC_TAMPCR_TAMPIE
-/**
- * @}
- */
+ /**
+ * @}
+ */
-/** @defgroup RTCEx_Tamper_Trigger_Definitions RTC Tamper Triggers Definitions
- * @{
- */
+ /** @defgroup RTCEx_Tamper_Trigger_Definitions RTC Tamper Triggers Definitions
+ * @{
+ */
#define RTC_TAMPERTRIGGER_RISINGEDGE ((uint32_t)0x00000000)
#define RTC_TAMPERTRIGGER_FALLINGEDGE ((uint32_t)0x00000002)
#define RTC_TAMPERTRIGGER_LOWLEVEL RTC_TAMPERTRIGGER_RISINGEDGE
#define RTC_TAMPERTRIGGER_HIGHLEVEL RTC_TAMPERTRIGGER_FALLINGEDGE
-/**
- * @}
- */
+ /**
+ * @}
+ */
-/** @defgroup RTCEx_Tamper_EraseBackUp_Definitions RTC Tamper EraseBackUp Definitions
-* @{
-*/
+ /** @defgroup RTCEx_Tamper_EraseBackUp_Definitions RTC Tamper EraseBackUp Definitions
+ * @{
+ */
#define RTC_TAMPER_ERASE_BACKUP_ENABLE ((uint32_t)0x00000000)
#define RTC_TAMPER_ERASE_BACKUP_DISABLE ((uint32_t)0x00020000)
-/**
- * @}
- */
+ /**
+ * @}
+ */
-/** @defgroup RTCEx_Tamper_MaskFlag_Definitions RTC Tamper Mask Flag Definitions
-* @{
-*/
+ /** @defgroup RTCEx_Tamper_MaskFlag_Definitions RTC Tamper Mask Flag Definitions
+ * @{
+ */
#define RTC_TAMPERMASK_FLAG_DISABLE ((uint32_t)0x00000000)
#define RTC_TAMPERMASK_FLAG_ENABLE ((uint32_t)0x00040000)
-/**
- * @}
- */
+ /**
+ * @}
+ */
-/** @defgroup RTCEx_Tamper_Filter_Definitions RTC Tamper Filter Definitions
- * @{
- */
+ /** @defgroup RTCEx_Tamper_Filter_Definitions RTC Tamper Filter Definitions
+ * @{
+ */
#define RTC_TAMPERFILTER_DISABLE ((uint32_t)0x00000000) /*!< Tamper filter is disabled */
#define RTC_TAMPERFILTER_2SAMPLE ((uint32_t)0x00000800) /*!< Tamper is activated after 2
- consecutive samples at the active level */
+ consecutive samples at the active level */
#define RTC_TAMPERFILTER_4SAMPLE ((uint32_t)0x00001000) /*!< Tamper is activated after 4
- consecutive samples at the active level */
+ consecutive samples at the active level */
#define RTC_TAMPERFILTER_8SAMPLE ((uint32_t)0x00001800) /*!< Tamper is activated after 8
- consecutive samples at the active level. */
-/**
- * @}
- */
+ consecutive samples at the active level. */
+ /**
+ * @}
+ */
-/** @defgroup RTCEx_Tamper_Sampling_Frequencies_Definitions RTC Tamper Sampling Frequencies Definitions
- * @{
- */
+ /** @defgroup RTCEx_Tamper_Sampling_Frequencies_Definitions RTC Tamper Sampling Frequencies Definitions
+ * @{
+ */
#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV32768 ((uint32_t)0x00000000) /*!< Each of the tamper inputs are sampled
- with a frequency = RTCCLK / 32768 */
+ with a frequency = RTCCLK / 32768 */
#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV16384 ((uint32_t)0x00000100) /*!< Each of the tamper inputs are sampled
- with a frequency = RTCCLK / 16384 */
+ with a frequency = RTCCLK / 16384 */
#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV8192 ((uint32_t)0x00000200) /*!< Each of the tamper inputs are sampled
- with a frequency = RTCCLK / 8192 */
+ with a frequency = RTCCLK / 8192 */
#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV4096 ((uint32_t)0x00000300) /*!< Each of the tamper inputs are sampled
- with a frequency = RTCCLK / 4096 */
+ with a frequency = RTCCLK / 4096 */
#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV2048 ((uint32_t)0x00000400) /*!< Each of the tamper inputs are sampled
- with a frequency = RTCCLK / 2048 */
+ with a frequency = RTCCLK / 2048 */
#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV1024 ((uint32_t)0x00000500) /*!< Each of the tamper inputs are sampled
- with a frequency = RTCCLK / 1024 */
+ with a frequency = RTCCLK / 1024 */
#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV512 ((uint32_t)0x00000600) /*!< Each of the tamper inputs are sampled
- with a frequency = RTCCLK / 512 */
+ with a frequency = RTCCLK / 512 */
#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV256 ((uint32_t)0x00000700) /*!< Each of the tamper inputs are sampled
- with a frequency = RTCCLK / 256 */
-/**
- * @}
- */
+ with a frequency = RTCCLK / 256 */
+ /**
+ * @}
+ */
-/** @defgroup RTCEx_Tamper_Pin_Precharge_Duration_Definitions RTC Tamper Pin Precharge Duration Definitions
- * @{
- */
+ /** @defgroup RTCEx_Tamper_Pin_Precharge_Duration_Definitions RTC Tamper Pin Precharge Duration Definitions
+ * @{
+ */
#define RTC_TAMPERPRECHARGEDURATION_1RTCCLK ((uint32_t)0x00000000) /*!< Tamper pins are pre-charged before
- sampling during 1 RTCCLK cycle */
+ sampling during 1 RTCCLK cycle */
#define RTC_TAMPERPRECHARGEDURATION_2RTCCLK ((uint32_t)0x00002000) /*!< Tamper pins are pre-charged before
- sampling during 2 RTCCLK cycles */
+ sampling during 2 RTCCLK cycles */
#define RTC_TAMPERPRECHARGEDURATION_4RTCCLK ((uint32_t)0x00004000) /*!< Tamper pins are pre-charged before
- sampling during 4 RTCCLK cycles */
+ sampling during 4 RTCCLK cycles */
#define RTC_TAMPERPRECHARGEDURATION_8RTCCLK ((uint32_t)0x00006000) /*!< Tamper pins are pre-charged before
- sampling during 8 RTCCLK cycles */
-/**
- * @}
- */
+ sampling during 8 RTCCLK cycles */
+ /**
+ * @}
+ */
-/** @defgroup RTCEx_Tamper_TimeStampOnTamperDetection_Definitions RTC Tamper TimeStamp On Tamper Detection Definitions
- * @{
- */
+ /** @defgroup RTCEx_Tamper_TimeStampOnTamperDetection_Definitions RTC Tamper TimeStamp On Tamper Detection Definitions
+ * @{
+ */
#define RTC_TIMESTAMPONTAMPERDETECTION_ENABLE ((uint32_t)RTC_TAMPCR_TAMPTS) /*!< TimeStamp on Tamper Detection event saved */
#define RTC_TIMESTAMPONTAMPERDETECTION_DISABLE ((uint32_t)0x00000000) /*!< TimeStamp on Tamper Detection event is not saved */
-/**
- * @}
- */
+ /**
+ * @}
+ */
-/** @defgroup RTCEx_Tamper_Pull_UP_Definitions RTC Tamper Pull Up Definitions
- * @{
- */
+ /** @defgroup RTCEx_Tamper_Pull_UP_Definitions RTC Tamper Pull Up Definitions
+ * @{
+ */
#define RTC_TAMPER_PULLUP_ENABLE ((uint32_t)0x00000000) /*!< TimeStamp on Tamper Detection event saved */
#define RTC_TAMPER_PULLUP_DISABLE ((uint32_t)RTC_TAMPCR_TAMPPUDIS) /*!< TimeStamp on Tamper Detection event is not saved */
-/**
- * @}
- */
+ /**
+ * @}
+ */
-/** @defgroup RTCEx_Wakeup_Timer_Definitions RTC Wakeup Timer Definitions
- * @{
- */
+ /** @defgroup RTCEx_Wakeup_Timer_Definitions RTC Wakeup Timer Definitions
+ * @{
+ */
#define RTC_WAKEUPCLOCK_RTCCLK_DIV16 ((uint32_t)0x00000000)
#define RTC_WAKEUPCLOCK_RTCCLK_DIV8 ((uint32_t)0x00000001)
#define RTC_WAKEUPCLOCK_RTCCLK_DIV4 ((uint32_t)0x00000002)
#define RTC_WAKEUPCLOCK_RTCCLK_DIV2 ((uint32_t)0x00000003)
#define RTC_WAKEUPCLOCK_CK_SPRE_16BITS ((uint32_t)0x00000004)
#define RTC_WAKEUPCLOCK_CK_SPRE_17BITS ((uint32_t)0x00000006)
-/**
- * @}
- */
+ /**
+ * @}
+ */
-/** @defgroup RTCEx_Smooth_calib_period_Definitions RTC Smooth Calib Period Definitions
- * @{
- */
+ /** @defgroup RTCEx_Smooth_calib_period_Definitions RTC Smooth Calib Period Definitions
+ * @{
+ */
#define RTC_SMOOTHCALIB_PERIOD_32SEC ((uint32_t)0x00000000) /*!< If RTCCLK = 32768 Hz, Smooth calibration
- period is 32s, else 2exp20 RTCCLK seconds */
+ period is 32s, else 2exp20 RTCCLK seconds */
#define RTC_SMOOTHCALIB_PERIOD_16SEC ((uint32_t)0x00002000) /*!< If RTCCLK = 32768 Hz, Smooth calibration
- period is 16s, else 2exp19 RTCCLK seconds */
+ period is 16s, else 2exp19 RTCCLK seconds */
#define RTC_SMOOTHCALIB_PERIOD_8SEC ((uint32_t)0x00004000) /*!< If RTCCLK = 32768 Hz, Smooth calibration
- period is 8s, else 2exp18 RTCCLK seconds */
-/**
- * @}
- */
+ period is 8s, else 2exp18 RTCCLK seconds */
+ /**
+ * @}
+ */
-/** @defgroup RTCEx_Smooth_calib_Plus_pulses_Definitions RTC Smooth Calib Plus Pulses Definitions
- * @{
- */
+ /** @defgroup RTCEx_Smooth_calib_Plus_pulses_Definitions RTC Smooth Calib Plus Pulses Definitions
+ * @{
+ */
#define RTC_SMOOTHCALIB_PLUSPULSES_SET ((uint32_t)0x00008000) /*!< The number of RTCCLK pulses added
- during a X -second window = Y - CALM[8:0]
- with Y = 512, 256, 128 when X = 32, 16, 8 */
+ during a X -second window = Y - CALM[8:0]
+ with Y = 512, 256, 128 when X = 32, 16, 8 */
#define RTC_SMOOTHCALIB_PLUSPULSES_RESET ((uint32_t)0x00000000) /*!< The number of RTCCLK pulses subbstited
- during a 32-second window = CALM[8:0] */
-/**
- * @}
- */
+ during a 32-second window = CALM[8:0] */
+ /**
+ * @}
+ */
-/** @defgroup RTCEx_Calib_Output_selection_Definitions RTC Calib Output Selection Definitions
- * @{
- */
+ /** @defgroup RTCEx_Calib_Output_selection_Definitions RTC Calib Output Selection Definitions
+ * @{
+ */
#define RTC_CALIBOUTPUT_512HZ ((uint32_t)0x00000000)
#define RTC_CALIBOUTPUT_1HZ ((uint32_t)0x00080000)
-/**
- * @}
- */
+ /**
+ * @}
+ */
-/** @defgroup RTCEx_Add_1_Second_Parameter_Definitions RTC Add 1 Second Parameter Definitions
- * @{
- */
+ /** @defgroup RTCEx_Add_1_Second_Parameter_Definitions RTC Add 1 Second Parameter Definitions
+ * @{
+ */
#define RTC_SHIFTADD1S_RESET ((uint32_t)0x00000000)
#define RTC_SHIFTADD1S_SET ((uint32_t)0x80000000)
-/**
- * @}
- */
+ /**
+ * @}
+ */
-/**
- * @}
- */
+ /**
+ * @}
+ */
-/* Exported macros -----------------------------------------------------------*/
-/** @defgroup RTCEx_Exported_Macros RTCEx Exported Macros
- * @{
- */
+ /* Exported macros -----------------------------------------------------------*/
+ /** @defgroup RTCEx_Exported_Macros RTCEx Exported Macros
+ * @{
+ */
-/**
- * @brief Enable the RTC WakeUp Timer peripheral.
- * @param __HANDLE__: specifies the RTC handle.
- * @retval None
- */
+ /**
+ * @brief Enable the RTC WakeUp Timer peripheral.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
#define __HAL_RTC_WAKEUPTIMER_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_WUTE))
-/**
- * @brief Disable the RTC WakeUp Timer peripheral.
- * @param __HANDLE__: specifies the RTC handle.
- * @retval None
- */
+ /**
+ * @brief Disable the RTC WakeUp Timer peripheral.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
#define __HAL_RTC_WAKEUPTIMER_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_WUTE))
-/**
- * @brief Enable the RTC WakeUpTimer interrupt.
- * @param __HANDLE__: specifies the RTC handle.
- * @param __INTERRUPT__: specifies the RTC WakeUpTimer interrupt sources to be enabled.
- * This parameter can be:
- * @arg RTC_IT_WUT: WakeUpTimer interrupt
- * @retval None
- */
+ /**
+ * @brief Enable the RTC WakeUpTimer interrupt.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __INTERRUPT__: specifies the RTC WakeUpTimer interrupt sources to be enabled.
+ * This parameter can be:
+ * @arg RTC_IT_WUT: WakeUpTimer interrupt
+ * @retval None
+ */
#define __HAL_RTC_WAKEUPTIMER_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR |= (__INTERRUPT__))
-/**
- * @brief Disable the RTC WakeUpTimer interrupt.
- * @param __HANDLE__: specifies the RTC handle.
- * @param __INTERRUPT__: specifies the RTC WakeUpTimer interrupt sources to be disabled.
- * This parameter can be:
- * @arg RTC_IT_WUT: WakeUpTimer interrupt
- * @retval None
- */
+ /**
+ * @brief Disable the RTC WakeUpTimer interrupt.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __INTERRUPT__: specifies the RTC WakeUpTimer interrupt sources to be disabled.
+ * This parameter can be:
+ * @arg RTC_IT_WUT: WakeUpTimer interrupt
+ * @retval None
+ */
#define __HAL_RTC_WAKEUPTIMER_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__))
-/**
- * @brief Check whether the specified RTC WakeUpTimer interrupt has occurred or not.
- * @param __HANDLE__: specifies the RTC handle.
- * @param __INTERRUPT__: specifies the RTC WakeUpTimer interrupt sources to check.
- * This parameter can be:
- * @arg RTC_IT_WUT: WakeUpTimer interrupt
- * @retval None
- */
+ /**
+ * @brief Check whether the specified RTC WakeUpTimer interrupt has occurred or not.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __INTERRUPT__: specifies the RTC WakeUpTimer interrupt sources to check.
+ * This parameter can be:
+ * @arg RTC_IT_WUT: WakeUpTimer interrupt
+ * @retval None
+ */
#define __HAL_RTC_WAKEUPTIMER_GET_IT(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 4)) != RESET) ? SET : RESET)
-/**
- * @brief Check whether the specified RTC Wake Up timer interrupt is enabled or not.
- * @param __HANDLE__: specifies the RTC handle.
- * @param __INTERRUPT__: specifies the RTC Wake Up timer interrupt sources to check.
- * This parameter can be:
- * @arg RTC_IT_WUT: WakeUpTimer interrupt
- * @retval None
- */
+ /**
+ * @brief Check whether the specified RTC Wake Up timer interrupt is enabled or not.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __INTERRUPT__: specifies the RTC Wake Up timer interrupt sources to check.
+ * This parameter can be:
+ * @arg RTC_IT_WUT: WakeUpTimer interrupt
+ * @retval None
+ */
#define __HAL_RTC_WAKEUPTIMER_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->CR) & (__INTERRUPT__)) != RESET) ? SET : RESET)
-/**
- * @brief Get the selected RTC WakeUpTimer's flag status.
- * @param __HANDLE__: specifies the RTC handle.
- * @param __FLAG__: specifies the RTC WakeUpTimer Flag is pending or not.
- * This parameter can be:
- * @arg RTC_FLAG_WUTF
- * @arg RTC_FLAG_WUTWF
- * @retval None
- */
+ /**
+ * @brief Get the selected RTC WakeUpTimer's flag status.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC WakeUpTimer Flag is pending or not.
+ * This parameter can be:
+ * @arg RTC_FLAG_WUTF
+ * @arg RTC_FLAG_WUTWF
+ * @retval None
+ */
#define __HAL_RTC_WAKEUPTIMER_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET) ? SET : RESET)
-/**
- * @brief Clear the RTC Wake Up timer's pending flags.
- * @param __HANDLE__: specifies the RTC handle.
- * @param __FLAG__: specifies the RTC WakeUpTimer Flag to clear.
- * This parameter can be:
- * @arg RTC_FLAG_WUTF
- * @retval None
- */
-#define __HAL_RTC_WAKEUPTIMER_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~((__FLAG__) | RTC_ISR_INIT)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))
+ /**
+ * @brief Clear the RTC Wake Up timer's pending flags.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC WakeUpTimer Flag to clear.
+ * This parameter can be:
+ * @arg RTC_FLAG_WUTF
+ * @retval None
+ */
+#define __HAL_RTC_WAKEUPTIMER_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~((__FLAG__) | RTC_ISR_INIT)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))
#if defined(RTC_TAMPER1_SUPPORT)
-/**
- * @brief Enable the RTC Tamper1 input detection.
- * @param __HANDLE__: specifies the RTC handle.
- * @retval None
- */
+ /**
+ * @brief Enable the RTC Tamper1 input detection.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
#define __HAL_RTC_TAMPER1_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->TAMPCR |= (RTC_TAMPCR_TAMP1E))
-/**
- * @brief Disable the RTC Tamper1 input detection.
- * @param __HANDLE__: specifies the RTC handle.
- * @retval None
- */
+ /**
+ * @brief Disable the RTC Tamper1 input detection.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
#define __HAL_RTC_TAMPER1_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->TAMPCR &= ~(RTC_TAMPCR_TAMP1E))
#endif /* RTC_TAMPER1_SUPPORT */
-/**
- * @brief Enable the RTC Tamper2 input detection.
- * @param __HANDLE__: specifies the RTC handle.
- * @retval None
- */
+ /**
+ * @brief Enable the RTC Tamper2 input detection.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
#define __HAL_RTC_TAMPER2_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->TAMPCR |= (RTC_TAMPCR_TAMP2E))
-/**
- * @brief Disable the RTC Tamper2 input detection.
- * @param __HANDLE__: specifies the RTC handle.
- * @retval None
- */
+ /**
+ * @brief Disable the RTC Tamper2 input detection.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
#define __HAL_RTC_TAMPER2_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->TAMPCR &= ~(RTC_TAMPCR_TAMP2E))
#if defined(RTC_TAMPER3_SUPPORT)
-/**
- * @brief Enable the RTC Tamper3 input detection.
- * @param __HANDLE__: specifies the RTC handle.
- * @retval None
- */
+ /**
+ * @brief Enable the RTC Tamper3 input detection.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
#define __HAL_RTC_TAMPER3_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->TAMPCR |= (RTC_TAMPCR_TAMP3E))
-/**
- * @brief Disable the RTC Tamper3 input detection.
- * @param __HANDLE__: specifies the RTC handle.
- * @retval None
- */
+ /**
+ * @brief Disable the RTC Tamper3 input detection.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
#define __HAL_RTC_TAMPER3_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->TAMPCR &= ~(RTC_TAMPCR_TAMP3E))
#endif /* RTC_TAMPER3_SUPPORT */
-/**
- * @brief Enable the RTC Tamper interrupt.
- * @param __HANDLE__: specifies the RTC handle.
- * @param __INTERRUPT__: specifies the RTC Tamper interrupt sources to be enabled.
- * This parameter can be any combination of the following values:
- * @arg RTC_IT_TAMP: All tampers interrupts
- * @arg RTC_IT_TAMP1: Tamper1 interrupt
- * @arg RTC_IT_TAMP2: Tamper2 interrupt
- * @arg RTC_IT_TAMP3: Tamper3 interrupt
- * @retval None
- */
+ /**
+ * @brief Enable the RTC Tamper interrupt.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __INTERRUPT__: specifies the RTC Tamper interrupt sources to be enabled.
+ * This parameter can be any combination of the following values:
+ * @arg RTC_IT_TAMP: All tampers interrupts
+ * @arg RTC_IT_TAMP1: Tamper1 interrupt
+ * @arg RTC_IT_TAMP2: Tamper2 interrupt
+ * @arg RTC_IT_TAMP3: Tamper3 interrupt
+ * @retval None
+ */
#define __HAL_RTC_TAMPER_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->TAMPCR |= (__INTERRUPT__))
-/**
- * @brief Disable the RTC Tamper interrupt.
- * @param __HANDLE__: specifies the RTC handle.
- * @param __INTERRUPT__: specifies the RTC Tamper interrupt sources to be disabled.
- * This parameter can be any combination of the following values:
- * @arg RTC_IT_TAMP: All tampers interrupts
- * @arg RTC_IT_TAMP1: Tamper1 interrupt
- * @arg RTC_IT_TAMP2: Tamper2 interrupt
- * @arg RTC_IT_TAMP3: Tamper3 interrupt
- * @retval None
- */
+ /**
+ * @brief Disable the RTC Tamper interrupt.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __INTERRUPT__: specifies the RTC Tamper interrupt sources to be disabled.
+ * This parameter can be any combination of the following values:
+ * @arg RTC_IT_TAMP: All tampers interrupts
+ * @arg RTC_IT_TAMP1: Tamper1 interrupt
+ * @arg RTC_IT_TAMP2: Tamper2 interrupt
+ * @arg RTC_IT_TAMP3: Tamper3 interrupt
+ * @retval None
+ */
#define __HAL_RTC_TAMPER_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->TAMPCR &= ~(__INTERRUPT__))
-/**
- * @brief Check whether the specified RTC Tamper interrupt has occurred or not.
- * @param __HANDLE__: specifies the RTC handle.
- * @param __INTERRUPT__: specifies the RTC Tamper interrupt to check.
- * This parameter can be:
- * @arg RTC_IT_TAMP1: Tamper1 interrupt
- * @arg RTC_IT_TAMP2: Tamper2 interrupt
- * @arg RTC_IT_TAMP3: Tamper3 interrupt
- * @retval None
- */
+ /**
+ * @brief Check whether the specified RTC Tamper interrupt has occurred or not.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __INTERRUPT__: specifies the RTC Tamper interrupt to check.
+ * This parameter can be:
+ * @arg RTC_IT_TAMP1: Tamper1 interrupt
+ * @arg RTC_IT_TAMP2: Tamper2 interrupt
+ * @arg RTC_IT_TAMP3: Tamper3 interrupt
+ * @retval None
+ */
#if defined(RTC_TAMPER1_SUPPORT) && defined(RTC_TAMPER3_SUPPORT)
#define __HAL_RTC_TAMPER_GET_IT(__HANDLE__, __INTERRUPT__) (((__INTERRUPT__) == RTC_IT_TAMP1) ? (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 3)) != RESET) ? SET : RESET) : \
((__INTERRUPT__) == RTC_IT_TAMP2) ? (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 5)) != RESET) ? SET : RESET) : \
@@ -529,475 +528,475 @@
#define __HAL_RTC_TAMPER_GET_IT(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 5)) != RESET) ? SET : RESET)
#endif /* RTC_TAMPER1_SUPPORT && RTC_TAMPER3_SUPPORT */
-/**
- * @brief Check whether the specified RTC Tamper interrupt is enabled or not.
- * @param __HANDLE__: specifies the RTC handle.
- * @param __INTERRUPT__: specifies the RTC Tamper interrupt source to check.
- * This parameter can be:
- * @arg RTC_IT_TAMP: All tampers interrupts
- * @arg RTC_IT_TAMP1: Tamper1 interrupt
- * @arg RTC_IT_TAMP2: Tamper2 interrupt
- * @arg RTC_IT_TAMP3: Tamper3 interrupt
- * @retval None
- */
+ /**
+ * @brief Check whether the specified RTC Tamper interrupt is enabled or not.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __INTERRUPT__: specifies the RTC Tamper interrupt source to check.
+ * This parameter can be:
+ * @arg RTC_IT_TAMP: All tampers interrupts
+ * @arg RTC_IT_TAMP1: Tamper1 interrupt
+ * @arg RTC_IT_TAMP2: Tamper2 interrupt
+ * @arg RTC_IT_TAMP3: Tamper3 interrupt
+ * @retval None
+ */
#define __HAL_RTC_TAMPER_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->TAMPCR) & (__INTERRUPT__)) != RESET) ? SET : RESET)
-/**
- * @brief Get the selected RTC Tamper's flag status.
- * @param __HANDLE__: specifies the RTC handle.
- * @param __FLAG__: specifies the RTC Tamper Flag is pending or not.
- * This parameter can be:
- * @arg RTC_FLAG_TAMP1F: Tamper1 flag
- * @arg RTC_FLAG_TAMP2F: Tamper2 flag
- * @arg RTC_FLAG_TAMP3F: Tamper3 flag
- * @retval None
- */
+ /**
+ * @brief Get the selected RTC Tamper's flag status.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC Tamper Flag is pending or not.
+ * This parameter can be:
+ * @arg RTC_FLAG_TAMP1F: Tamper1 flag
+ * @arg RTC_FLAG_TAMP2F: Tamper2 flag
+ * @arg RTC_FLAG_TAMP3F: Tamper3 flag
+ * @retval None
+ */
#define __HAL_RTC_TAMPER_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET) ? SET : RESET)
-/**
- * @brief Clear the RTC Tamper's pending flags.
- * @param __HANDLE__: specifies the RTC handle.
- * @param __FLAG__: specifies the RTC Tamper Flag sources to clear.
- * This parameter can be:
- * @arg RTC_FLAG_TAMP1F: Tamper1 flag
- * @arg RTC_FLAG_TAMP2F: Tamper2 flag
- * @arg RTC_FLAG_TAMP3F: Tamper3 flag
- * @retval None
- */
+ /**
+ * @brief Clear the RTC Tamper's pending flags.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC Tamper Flag sources to clear.
+ * This parameter can be:
+ * @arg RTC_FLAG_TAMP1F: Tamper1 flag
+ * @arg RTC_FLAG_TAMP2F: Tamper2 flag
+ * @arg RTC_FLAG_TAMP3F: Tamper3 flag
+ * @retval None
+ */
#define __HAL_RTC_TAMPER_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~((__FLAG__) | RTC_ISR_INIT)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))
-/**
- * @brief Enable the RTC TimeStamp peripheral.
- * @param __HANDLE__: specifies the RTC handle.
- * @retval None
- */
+ /**
+ * @brief Enable the RTC TimeStamp peripheral.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
#define __HAL_RTC_TIMESTAMP_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_TSE))
-/**
- * @brief Disable the RTC TimeStamp peripheral.
- * @param __HANDLE__: specifies the RTC handle.
- * @retval None
- */
+ /**
+ * @brief Disable the RTC TimeStamp peripheral.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
#define __HAL_RTC_TIMESTAMP_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_TSE))
-/**
- * @brief Enable the RTC TimeStamp interrupt.
- * @param __HANDLE__: specifies the RTC handle.
- * @param __INTERRUPT__: specifies the RTC TimeStamp interrupt source to be enabled.
- * This parameter can be:
- * @arg RTC_IT_TS: TimeStamp interrupt
- * @retval None
- */
+ /**
+ * @brief Enable the RTC TimeStamp interrupt.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __INTERRUPT__: specifies the RTC TimeStamp interrupt source to be enabled.
+ * This parameter can be:
+ * @arg RTC_IT_TS: TimeStamp interrupt
+ * @retval None
+ */
#define __HAL_RTC_TIMESTAMP_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR |= (__INTERRUPT__))
-/**
- * @brief Disable the RTC TimeStamp interrupt.
- * @param __HANDLE__: specifies the RTC handle.
- * @param __INTERRUPT__: specifies the RTC TimeStamp interrupt source to be disabled.
- * This parameter can be:
- * @arg RTC_IT_TS: TimeStamp interrupt
- * @retval None
- */
+ /**
+ * @brief Disable the RTC TimeStamp interrupt.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __INTERRUPT__: specifies the RTC TimeStamp interrupt source to be disabled.
+ * This parameter can be:
+ * @arg RTC_IT_TS: TimeStamp interrupt
+ * @retval None
+ */
#define __HAL_RTC_TIMESTAMP_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__))
-/**
- * @brief Check whether the specified RTC TimeStamp interrupt has occurred or not.
- * @param __HANDLE__: specifies the RTC handle.
- * @param __INTERRUPT__: specifies the RTC TimeStamp interrupt source to check.
- * This parameter can be:
- * @arg RTC_IT_TS: TimeStamp interrupt
- * @retval None
- */
+ /**
+ * @brief Check whether the specified RTC TimeStamp interrupt has occurred or not.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __INTERRUPT__: specifies the RTC TimeStamp interrupt source to check.
+ * This parameter can be:
+ * @arg RTC_IT_TS: TimeStamp interrupt
+ * @retval None
+ */
#define __HAL_RTC_TIMESTAMP_GET_IT(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 4)) != RESET) ? SET : RESET)
-/**
- * @brief Check whether the specified RTC Time Stamp interrupt is enabled or not.
- * @param __HANDLE__: specifies the RTC handle.
- * @param __INTERRUPT__: specifies the RTC Time Stamp interrupt source to check.
- * This parameter can be:
- * @arg RTC_IT_TS: TimeStamp interrupt
- * @retval None
- */
+ /**
+ * @brief Check whether the specified RTC Time Stamp interrupt is enabled or not.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __INTERRUPT__: specifies the RTC Time Stamp interrupt source to check.
+ * This parameter can be:
+ * @arg RTC_IT_TS: TimeStamp interrupt
+ * @retval None
+ */
#define __HAL_RTC_TIMESTAMP_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->CR) & (__INTERRUPT__)) != RESET) ? SET : RESET)
-/**
- * @brief Get the selected RTC TimeStamp's flag status.
- * @param __HANDLE__: specifies the RTC handle.
- * @param __FLAG__: specifies the RTC TimeStamp Flag is pending or not.
- * This parameter can be:
- * @arg RTC_FLAG_TSF
- * @arg RTC_FLAG_TSOVF
- * @retval None
- */
+ /**
+ * @brief Get the selected RTC TimeStamp's flag status.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC TimeStamp Flag is pending or not.
+ * This parameter can be:
+ * @arg RTC_FLAG_TSF
+ * @arg RTC_FLAG_TSOVF
+ * @retval None
+ */
#define __HAL_RTC_TIMESTAMP_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET) ? SET : RESET)
-/**
- * @brief Clear the RTC Time Stamp's pending flags.
- * @param __HANDLE__: specifies the RTC handle.
- * @param __FLAG__: specifies the RTC Alarm Flag sources to clear.
- * This parameter can be:
- * @arg RTC_FLAG_TSF
- * @arg RTC_FLAG_TSOVF
- * @retval None
- */
+ /**
+ * @brief Clear the RTC Time Stamp's pending flags.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC Alarm Flag sources to clear.
+ * This parameter can be:
+ * @arg RTC_FLAG_TSF
+ * @arg RTC_FLAG_TSOVF
+ * @retval None
+ */
#define __HAL_RTC_TIMESTAMP_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~((__FLAG__) | RTC_ISR_INIT)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))
-/**
- * @brief Enable the RTC internal TimeStamp peripheral.
- * @param __HANDLE__: specifies the RTC handle.
- * @retval None
- */
+ /**
+ * @brief Enable the RTC internal TimeStamp peripheral.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
#define __HAL_RTC_INTERNAL_TIMESTAMP_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_ITSE))
-/**
- * @brief Disable the RTC internal TimeStamp peripheral.
- * @param __HANDLE__: specifies the RTC handle.
- * @retval None
- */
+ /**
+ * @brief Disable the RTC internal TimeStamp peripheral.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
#define __HAL_RTC_INTERNAL_TIMESTAMP_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_ITSE))
-/**
- * @brief Get the selected RTC Internal Time Stamp's flag status.
- * @param __HANDLE__: specifies the RTC handle.
- * @param __FLAG__: specifies the RTC Internal Time Stamp Flag is pending or not.
- * This parameter can be:
- * @arg RTC_FLAG_ITSF
- * @retval None
- */
+ /**
+ * @brief Get the selected RTC Internal Time Stamp's flag status.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC Internal Time Stamp Flag is pending or not.
+ * This parameter can be:
+ * @arg RTC_FLAG_ITSF
+ * @retval None
+ */
#define __HAL_RTC_INTERNAL_TIMESTAMP_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET) ? SET : RESET)
-/**
- * @brief Clear the RTC Internal Time Stamp's pending flags.
- * @param __HANDLE__: specifies the RTC handle.
- * @param __FLAG__: specifies the RTC Internal Time Stamp Flag source to clear.
- * This parameter can be:
- * @arg RTC_FLAG_ITSF
- * @retval None
- */
+ /**
+ * @brief Clear the RTC Internal Time Stamp's pending flags.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC Internal Time Stamp Flag source to clear.
+ * This parameter can be:
+ * @arg RTC_FLAG_ITSF
+ * @retval None
+ */
#define __HAL_RTC_INTERNAL_TIMESTAMP_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~((__FLAG__) | RTC_ISR_INIT)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))
-/**
- * @brief Enable the RTC calibration output.
- * @param __HANDLE__: specifies the RTC handle.
- * @retval None
- */
+ /**
+ * @brief Enable the RTC calibration output.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
#define __HAL_RTC_CALIBRATION_OUTPUT_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_COE))
-/**
- * @brief Disable the calibration output.
- * @param __HANDLE__: specifies the RTC handle.
- * @retval None
- */
+ /**
+ * @brief Disable the calibration output.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
#define __HAL_RTC_CALIBRATION_OUTPUT_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_COE))
-/**
- * @brief Enable the clock reference detection.
- * @param __HANDLE__: specifies the RTC handle.
- * @retval None
- */
+ /**
+ * @brief Enable the clock reference detection.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
#define __HAL_RTC_CLOCKREF_DETECTION_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_REFCKON))
-/**
- * @brief Disable the clock reference detection.
- * @param __HANDLE__: specifies the RTC handle.
- * @retval None
- */
+ /**
+ * @brief Disable the clock reference detection.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
#define __HAL_RTC_CLOCKREF_DETECTION_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_REFCKON))
-/**
- * @brief Get the selected RTC shift operation's flag status.
- * @param __HANDLE__: specifies the RTC handle.
- * @param __FLAG__: specifies the RTC shift operation Flag is pending or not.
- * This parameter can be:
- * @arg RTC_FLAG_SHPF
- * @retval None
- */
+ /**
+ * @brief Get the selected RTC shift operation's flag status.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC shift operation Flag is pending or not.
+ * This parameter can be:
+ * @arg RTC_FLAG_SHPF
+ * @retval None
+ */
#define __HAL_RTC_SHIFT_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET) ? SET : RESET)
-/**
- * @brief Enable interrupt on the RTC WakeUp Timer associated Exti line.
- * @retval None
- */
+ /**
+ * @brief Enable interrupt on the RTC WakeUp Timer associated Exti line.
+ * @retval None
+ */
#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_IT() (EXTI->IMR1 |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
-/**
- * @brief Disable interrupt on the RTC WakeUp Timer associated Exti line.
- * @retval None
- */
+ /**
+ * @brief Disable interrupt on the RTC WakeUp Timer associated Exti line.
+ * @retval None
+ */
#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_IT() (EXTI->IMR1 &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT))
-/**
- * @brief Enable event on the RTC WakeUp Timer associated Exti line.
- * @retval None
- */
+ /**
+ * @brief Enable event on the RTC WakeUp Timer associated Exti line.
+ * @retval None
+ */
#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_EVENT() (EXTI->EMR1 |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
-/**
- * @brief Disable event on the RTC WakeUp Timer associated Exti line.
- * @retval None
- */
+ /**
+ * @brief Disable event on the RTC WakeUp Timer associated Exti line.
+ * @retval None
+ */
#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_EVENT() (EXTI->EMR1 &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT))
-/**
- * @brief Enable falling edge trigger on the RTC WakeUp Timer associated Exti line.
- * @retval None
- */
+ /**
+ * @brief Enable falling edge trigger on the RTC WakeUp Timer associated Exti line.
+ * @retval None
+ */
#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_FALLING_EDGE() (EXTI->FTSR1 |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
-/**
- * @brief Disable falling edge trigger on the RTC WakeUp Timer associated Exti line.
- * @retval None
- */
+ /**
+ * @brief Disable falling edge trigger on the RTC WakeUp Timer associated Exti line.
+ * @retval None
+ */
#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_FALLING_EDGE() (EXTI->FTSR1 &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT))
-/**
- * @brief Enable rising edge trigger on the RTC WakeUp Timer associated Exti line.
- * @retval None
- */
+ /**
+ * @brief Enable rising edge trigger on the RTC WakeUp Timer associated Exti line.
+ * @retval None
+ */
#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_EDGE() (EXTI->RTSR1 |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
-/**
- * @brief Disable rising edge trigger on the RTC WakeUp Timer associated Exti line.
- * @retval None
- */
+ /**
+ * @brief Disable rising edge trigger on the RTC WakeUp Timer associated Exti line.
+ * @retval None
+ */
#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_RISING_EDGE() (EXTI->RTSR1 &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT))
-/**
- * @brief Enable rising & falling edge trigger on the RTC WakeUp Timer associated Exti line.
- * @retval None
- */
+ /**
+ * @brief Enable rising & falling edge trigger on the RTC WakeUp Timer associated Exti line.
+ * @retval None
+ */
#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_FALLING_EDGE() do { \
__HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_EDGE(); \
__HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_FALLING_EDGE(); \
} while(0)
-/**
- * @brief Disable rising & falling edge trigger on the RTC WakeUp Timer associated Exti line.
- * This parameter can be:
- * @retval None
- */
+ /**
+ * @brief Disable rising & falling edge trigger on the RTC WakeUp Timer associated Exti line.
+ * This parameter can be:
+ * @retval None
+ */
#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_RISING_FALLING_EDGE() do { \
__HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_RISING_EDGE(); \
__HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_FALLING_EDGE(); \
} while(0)
-/**
- * @brief Check whether the RTC WakeUp Timer associated Exti line interrupt flag is set or not.
- * @retval Line Status.
- */
+ /**
+ * @brief Check whether the RTC WakeUp Timer associated Exti line interrupt flag is set or not.
+ * @retval Line Status.
+ */
#define __HAL_RTC_WAKEUPTIMER_EXTI_GET_FLAG() (EXTI->PR1 & RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
-/**
- * @brief Clear the RTC WakeUp Timer associated Exti line flag.
- * @retval None
- */
+ /**
+ * @brief Clear the RTC WakeUp Timer associated Exti line flag.
+ * @retval None
+ */
#define __HAL_RTC_WAKEUPTIMER_EXTI_CLEAR_FLAG() (EXTI->PR1 = RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
-/**
- * @brief Generate a Software interrupt on the RTC WakeUp Timer associated Exti line.
- * @retval None
- */
+ /**
+ * @brief Generate a Software interrupt on the RTC WakeUp Timer associated Exti line.
+ * @retval None
+ */
#define __HAL_RTC_WAKEUPTIMER_EXTI_GENERATE_SWIT() (EXTI->SWIER1 |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
-/**
- * @brief Enable interrupt on the RTC Tamper and Timestamp associated Exti line.
- * @retval None
- */
+ /**
+ * @brief Enable interrupt on the RTC Tamper and Timestamp associated Exti line.
+ * @retval None
+ */
#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_IT() (EXTI->IMR1 |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
-/**
- * @brief Disable interrupt on the RTC Tamper and Timestamp associated Exti line.
- * @retval None
- */
+ /**
+ * @brief Disable interrupt on the RTC Tamper and Timestamp associated Exti line.
+ * @retval None
+ */
#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_IT() (EXTI->IMR1 &= ~(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT))
-/**
- * @brief Enable event on the RTC Tamper and Timestamp associated Exti line.
- * @retval None
- */
+ /**
+ * @brief Enable event on the RTC Tamper and Timestamp associated Exti line.
+ * @retval None
+ */
#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_EVENT() (EXTI->EMR1 |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
-/**
- * @brief Disable event on the RTC Tamper and Timestamp associated Exti line.
- * @retval None
- */
+ /**
+ * @brief Disable event on the RTC Tamper and Timestamp associated Exti line.
+ * @retval None
+ */
#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_EVENT() (EXTI->EMR1 &= ~(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT))
-/**
- * @brief Enable falling edge trigger on the RTC Tamper and Timestamp associated Exti line.
- * @retval None
- */
+ /**
+ * @brief Enable falling edge trigger on the RTC Tamper and Timestamp associated Exti line.
+ * @retval None
+ */
#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_FALLING_EDGE() (EXTI->FTSR1 |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
-/**
- * @brief Disable falling edge trigger on the RTC Tamper and Timestamp associated Exti line.
- * @retval None
- */
+ /**
+ * @brief Disable falling edge trigger on the RTC Tamper and Timestamp associated Exti line.
+ * @retval None
+ */
#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_FALLING_EDGE() (EXTI->FTSR1 &= ~(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT))
-/**
- * @brief Enable rising edge trigger on the RTC Tamper and Timestamp associated Exti line.
- * @retval None
- */
+ /**
+ * @brief Enable rising edge trigger on the RTC Tamper and Timestamp associated Exti line.
+ * @retval None
+ */
#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_EDGE() (EXTI->RTSR1 |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
-/**
- * @brief Disable rising edge trigger on the RTC Tamper and Timestamp associated Exti line.
- * @retval None
- */
+ /**
+ * @brief Disable rising edge trigger on the RTC Tamper and Timestamp associated Exti line.
+ * @retval None
+ */
#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_RISING_EDGE() (EXTI->RTSR1 &= ~(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT))
-/**
- * @brief Enable rising & falling edge trigger on the RTC Tamper and Timestamp associated Exti line.
- * @retval None
- */
+ /**
+ * @brief Enable rising & falling edge trigger on the RTC Tamper and Timestamp associated Exti line.
+ * @retval None
+ */
#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_FALLING_EDGE() do { \
__HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_EDGE(); \
__HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_FALLING_EDGE(); \
} while(0)
-/**
- * @brief Disable rising & falling edge trigger on the RTC Tamper and Timestamp associated Exti line.
- * This parameter can be:
- * @retval None
- */
+ /**
+ * @brief Disable rising & falling edge trigger on the RTC Tamper and Timestamp associated Exti line.
+ * This parameter can be:
+ * @retval None
+ */
#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_RISING_FALLING_EDGE() do { \
__HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_RISING_EDGE(); \
__HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_FALLING_EDGE(); \
} while(0)
-/**
- * @brief Check whether the RTC Tamper and Timestamp associated Exti line interrupt flag is set or not.
- * @retval Line Status.
- */
+ /**
+ * @brief Check whether the RTC Tamper and Timestamp associated Exti line interrupt flag is set or not.
+ * @retval Line Status.
+ */
#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GET_FLAG() (EXTI->PR1 & RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
-/**
- * @brief Clear the RTC Tamper and Timestamp associated Exti line flag.
- * @retval None
- */
+ /**
+ * @brief Clear the RTC Tamper and Timestamp associated Exti line flag.
+ * @retval None
+ */
#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_CLEAR_FLAG() (EXTI->PR1 = RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
-/**
- * @brief Generate a Software interrupt on the RTC Tamper and Timestamp associated Exti line
- * @retval None
- */
+ /**
+ * @brief Generate a Software interrupt on the RTC Tamper and Timestamp associated Exti line
+ * @retval None
+ */
#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GENERATE_SWIT() (EXTI->SWIER1 |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
-/**
- * @}
- */
+ /**
+ * @}
+ */
-/* Exported functions --------------------------------------------------------*/
-/** @addtogroup RTCEx_Exported_Functions
- * @{
- */
+ /* Exported functions --------------------------------------------------------*/
+ /** @addtogroup RTCEx_Exported_Functions
+ * @{
+ */
-/* RTC TimeStamp and Tamper functions *****************************************/
-/** @addtogroup RTCEx_Exported_Functions_Group1
- * @{
- */
-HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp(RTC_HandleTypeDef *hrtc, uint32_t TimeStampEdge, uint32_t RTC_TimeStampPin);
-HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp_IT(RTC_HandleTypeDef *hrtc, uint32_t TimeStampEdge, uint32_t RTC_TimeStampPin);
-HAL_StatusTypeDef HAL_RTCEx_DeactivateTimeStamp(RTC_HandleTypeDef *hrtc);
-HAL_StatusTypeDef HAL_RTCEx_SetInternalTimeStamp(RTC_HandleTypeDef *hrtc);
-HAL_StatusTypeDef HAL_RTCEx_DeactivateInternalTimeStamp(RTC_HandleTypeDef *hrtc);
-HAL_StatusTypeDef HAL_RTCEx_GetTimeStamp(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTimeStamp, RTC_DateTypeDef *sTimeStampDate, uint32_t Format);
+ /* RTC TimeStamp and Tamper functions *****************************************/
+ /** @addtogroup RTCEx_Exported_Functions_Group1
+ * @{
+ */
+ HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp(RTC_HandleTypeDef *hrtc, uint32_t TimeStampEdge, uint32_t RTC_TimeStampPin);
+ HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp_IT(RTC_HandleTypeDef *hrtc, uint32_t TimeStampEdge, uint32_t RTC_TimeStampPin);
+ HAL_StatusTypeDef HAL_RTCEx_DeactivateTimeStamp(RTC_HandleTypeDef *hrtc);
+ HAL_StatusTypeDef HAL_RTCEx_SetInternalTimeStamp(RTC_HandleTypeDef *hrtc);
+ HAL_StatusTypeDef HAL_RTCEx_DeactivateInternalTimeStamp(RTC_HandleTypeDef *hrtc);
+ HAL_StatusTypeDef HAL_RTCEx_GetTimeStamp(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTimeStamp, RTC_DateTypeDef *sTimeStampDate, uint32_t Format);
-HAL_StatusTypeDef HAL_RTCEx_SetTamper(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef* sTamper);
-HAL_StatusTypeDef HAL_RTCEx_SetTamper_IT(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef* sTamper);
-HAL_StatusTypeDef HAL_RTCEx_DeactivateTamper(RTC_HandleTypeDef *hrtc, uint32_t Tamper);
-void HAL_RTCEx_TamperTimeStampIRQHandler(RTC_HandleTypeDef *hrtc);
+ HAL_StatusTypeDef HAL_RTCEx_SetTamper(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef* sTamper);
+ HAL_StatusTypeDef HAL_RTCEx_SetTamper_IT(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef* sTamper);
+ HAL_StatusTypeDef HAL_RTCEx_DeactivateTamper(RTC_HandleTypeDef *hrtc, uint32_t Tamper);
+ void HAL_RTCEx_TamperTimeStampIRQHandler(RTC_HandleTypeDef *hrtc);
#if defined(RTC_TAMPER1_SUPPORT)
-void HAL_RTCEx_Tamper1EventCallback(RTC_HandleTypeDef *hrtc);
+ void HAL_RTCEx_Tamper1EventCallback(RTC_HandleTypeDef *hrtc);
#endif /* RTC_TAMPER1_SUPPORT */
-void HAL_RTCEx_Tamper2EventCallback(RTC_HandleTypeDef *hrtc);
+ void HAL_RTCEx_Tamper2EventCallback(RTC_HandleTypeDef *hrtc);
#if defined(RTC_TAMPER3_SUPPORT)
-void HAL_RTCEx_Tamper3EventCallback(RTC_HandleTypeDef *hrtc);
+ void HAL_RTCEx_Tamper3EventCallback(RTC_HandleTypeDef *hrtc);
#endif /* RTC_TAMPER3_SUPPORT */
-void HAL_RTCEx_TimeStampEventCallback(RTC_HandleTypeDef *hrtc);
-HAL_StatusTypeDef HAL_RTCEx_PollForTimeStampEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
+ void HAL_RTCEx_TimeStampEventCallback(RTC_HandleTypeDef *hrtc);
+ HAL_StatusTypeDef HAL_RTCEx_PollForTimeStampEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
#if defined(RTC_TAMPER1_SUPPORT)
-HAL_StatusTypeDef HAL_RTCEx_PollForTamper1Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
+ HAL_StatusTypeDef HAL_RTCEx_PollForTamper1Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
#endif /* RTC_TAMPER1_SUPPORT */
-HAL_StatusTypeDef HAL_RTCEx_PollForTamper2Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
+ HAL_StatusTypeDef HAL_RTCEx_PollForTamper2Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
#if defined(RTC_TAMPER3_SUPPORT)
-HAL_StatusTypeDef HAL_RTCEx_PollForTamper3Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
+ HAL_StatusTypeDef HAL_RTCEx_PollForTamper3Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
#endif /* RTC_TAMPER3_SUPPORT */
-/**
- * @}
- */
+ /**
+ * @}
+ */
-/* RTC Wake-up functions ******************************************************/
-/** @addtogroup RTCEx_Exported_Functions_Group2
- * @{
- */
-HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock);
-HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer_IT(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock);
-uint32_t HAL_RTCEx_DeactivateWakeUpTimer(RTC_HandleTypeDef *hrtc);
-uint32_t HAL_RTCEx_GetWakeUpTimer(RTC_HandleTypeDef *hrtc);
-void HAL_RTCEx_WakeUpTimerIRQHandler(RTC_HandleTypeDef *hrtc);
-void HAL_RTCEx_WakeUpTimerEventCallback(RTC_HandleTypeDef *hrtc);
-HAL_StatusTypeDef HAL_RTCEx_PollForWakeUpTimerEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
-/**
- * @}
- */
+ /* RTC Wake-up functions ******************************************************/
+ /** @addtogroup RTCEx_Exported_Functions_Group2
+ * @{
+ */
+ HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock);
+ HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer_IT(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock);
+ uint32_t HAL_RTCEx_DeactivateWakeUpTimer(RTC_HandleTypeDef *hrtc);
+ uint32_t HAL_RTCEx_GetWakeUpTimer(RTC_HandleTypeDef *hrtc);
+ void HAL_RTCEx_WakeUpTimerIRQHandler(RTC_HandleTypeDef *hrtc);
+ void HAL_RTCEx_WakeUpTimerEventCallback(RTC_HandleTypeDef *hrtc);
+ HAL_StatusTypeDef HAL_RTCEx_PollForWakeUpTimerEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
+ /**
+ * @}
+ */
-/* Extended Control functions ************************************************/
-/** @addtogroup RTCEx_Exported_Functions_Group3
- * @{
- */
-void HAL_RTCEx_BKUPWrite(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister, uint32_t Data);
-uint32_t HAL_RTCEx_BKUPRead(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister);
+ /* Extended Control functions ************************************************/
+ /** @addtogroup RTCEx_Exported_Functions_Group3
+ * @{
+ */
+ void HAL_RTCEx_BKUPWrite(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister, uint32_t Data);
+ uint32_t HAL_RTCEx_BKUPRead(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister);
-HAL_StatusTypeDef HAL_RTCEx_SetSmoothCalib(RTC_HandleTypeDef *hrtc, uint32_t SmoothCalibPeriod, uint32_t SmoothCalibPlusPulses, uint32_t SmoothCalibMinusPulsesValue);
-HAL_StatusTypeDef HAL_RTCEx_SetSynchroShift(RTC_HandleTypeDef *hrtc, uint32_t ShiftAdd1S, uint32_t ShiftSubFS);
-HAL_StatusTypeDef HAL_RTCEx_SetCalibrationOutPut(RTC_HandleTypeDef *hrtc, uint32_t CalibOutput);
-HAL_StatusTypeDef HAL_RTCEx_DeactivateCalibrationOutPut(RTC_HandleTypeDef *hrtc);
-HAL_StatusTypeDef HAL_RTCEx_SetRefClock(RTC_HandleTypeDef *hrtc);
-HAL_StatusTypeDef HAL_RTCEx_DeactivateRefClock(RTC_HandleTypeDef *hrtc);
-HAL_StatusTypeDef HAL_RTCEx_EnableBypassShadow(RTC_HandleTypeDef *hrtc);
-HAL_StatusTypeDef HAL_RTCEx_DisableBypassShadow(RTC_HandleTypeDef *hrtc);
-/**
- * @}
- */
+ HAL_StatusTypeDef HAL_RTCEx_SetSmoothCalib(RTC_HandleTypeDef *hrtc, uint32_t SmoothCalibPeriod, uint32_t SmoothCalibPlusPulses, uint32_t SmoothCalibMinusPulsesValue);
+ HAL_StatusTypeDef HAL_RTCEx_SetSynchroShift(RTC_HandleTypeDef *hrtc, uint32_t ShiftAdd1S, uint32_t ShiftSubFS);
+ HAL_StatusTypeDef HAL_RTCEx_SetCalibrationOutPut(RTC_HandleTypeDef *hrtc, uint32_t CalibOutput);
+ HAL_StatusTypeDef HAL_RTCEx_DeactivateCalibrationOutPut(RTC_HandleTypeDef *hrtc);
+ HAL_StatusTypeDef HAL_RTCEx_SetRefClock(RTC_HandleTypeDef *hrtc);
+ HAL_StatusTypeDef HAL_RTCEx_DeactivateRefClock(RTC_HandleTypeDef *hrtc);
+ HAL_StatusTypeDef HAL_RTCEx_EnableBypassShadow(RTC_HandleTypeDef *hrtc);
+ HAL_StatusTypeDef HAL_RTCEx_DisableBypassShadow(RTC_HandleTypeDef *hrtc);
+ /**
+ * @}
+ */
-/* Extended RTC features functions *******************************************/
-/** @addtogroup RTCEx_Exported_Functions_Group4
- * @{
- */
-void HAL_RTCEx_AlarmBEventCallback(RTC_HandleTypeDef *hrtc);
-HAL_StatusTypeDef HAL_RTCEx_PollForAlarmBEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
-/**
- * @}
- */
+ /* Extended RTC features functions *******************************************/
+ /** @addtogroup RTCEx_Exported_Functions_Group4
+ * @{
+ */
+ void HAL_RTCEx_AlarmBEventCallback(RTC_HandleTypeDef *hrtc);
+ HAL_StatusTypeDef HAL_RTCEx_PollForAlarmBEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
+ /**
+ * @}
+ */
-/**
- * @}
- */
+ /**
+ * @}
+ */
-/* Private types -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private constants ---------------------------------------------------------*/
-/** @defgroup RTCEx_Private_Constants RTCEx Private Constants
- * @{
- */
+ /* Private types -------------------------------------------------------------*/
+ /* Private variables ---------------------------------------------------------*/
+ /* Private constants ---------------------------------------------------------*/
+ /** @defgroup RTCEx_Private_Constants RTCEx Private Constants
+ * @{
+ */
#define RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT ((uint32_t)0x00080000) /*!< External interrupt line 19 Connected to the RTC Tamper and Time Stamp events */
#define RTC_EXTI_LINE_WAKEUPTIMER_EVENT ((uint32_t)0x00100000) /*!< External interrupt line 20 Connected to the RTC Wakeup event */
-/**
- * @}
- */
+ /**
+ * @}
+ */
-/* Private macros ------------------------------------------------------------*/
-/** @defgroup RTCEx_Private_Macros RTCEx Private Macros
- * @{
- */
+ /* Private macros ------------------------------------------------------------*/
+ /** @defgroup RTCEx_Private_Macros RTCEx Private Macros
+ * @{
+ */
-/** @defgroup RTCEx_IS_RTC_Definitions Private macros to check input parameters
- * @{
- */
+ /** @defgroup RTCEx_IS_RTC_Definitions Private macros to check input parameters
+ * @{
+ */
#define IS_RTC_OUTPUT(OUTPUT) (((OUTPUT) == RTC_OUTPUT_DISABLE) || \
((OUTPUT) == RTC_OUTPUT_ALARMA) || \
@@ -1018,7 +1017,7 @@
#define IS_RTC_TAMPER_TRIGGER(TRIGGER) (((TRIGGER) == RTC_TAMPERTRIGGER_RISINGEDGE) || \
((TRIGGER) == RTC_TAMPERTRIGGER_FALLINGEDGE) || \
((TRIGGER) == RTC_TAMPERTRIGGER_LOWLEVEL) || \
- ((TRIGGER) == RTC_TAMPERTRIGGER_HIGHLEVEL))
+ ((TRIGGER) == RTC_TAMPERTRIGGER_HIGHLEVEL))
#define IS_RTC_TAMPER_ERASE_MODE(MODE) (((MODE) == RTC_TAMPER_ERASE_BACKUP_ENABLE) || \
((MODE) == RTC_TAMPER_ERASE_BACKUP_DISABLE))
@@ -1077,21 +1076,21 @@
#define IS_RTC_CALIB_OUTPUT(OUTPUT) (((OUTPUT) == RTC_CALIBOUTPUT_512HZ) || \
((OUTPUT) == RTC_CALIBOUTPUT_1HZ))
-/**
- * @}
- */
+ /**
+ * @}
+ */
-/**
- * @}
- */
+ /**
+ * @}
+ */
-/**
- * @}
- */
+ /**
+ * @}
+ */
-/**
- * @}
- */
+ /**
+ * @}
+ */
#ifdef __cplusplus
}
--- a/README.md Sat Feb 25 00:23:53 2017 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,89 +0,0 @@ -# Getting started with Blinky on mbed OS - -This is a very simple guide, reviewing the steps required to get Blinky working on an mbed OS platform. - -Please install [mbed CLI](https://github.com/ARMmbed/mbed-cli#installing-mbed-cli). - -## Get the example application! - -From the command line, import the example: - -``` -mbed import mbed-os-example-blinky -cd mbed-os-example-blinky -``` - -### Now compile - -Invoke `mbed compile` specifying the name of your platform and your favorite toolchain (`GCC_ARM`, `ARM`, `IAR`). For example, for the ARM Compiler 5: - -``` -mbed compile -m K64F -t ARM -``` - -Your PC may take a few minutes to compile your code. At the end you should get the following result: - -``` -[snip] -+----------------------------+-------+-------+------+ -| Module | .text | .data | .bss | -+----------------------------+-------+-------+------+ -| Misc | 13939 | 24 | 1372 | -| core/hal | 16993 | 96 | 296 | -| core/rtos | 7384 | 92 | 4204 | -| features/FEATURE_IPV4 | 80 | 0 | 176 | -| frameworks/greentea-client | 1830 | 60 | 44 | -| frameworks/utest | 2392 | 512 | 292 | -| Subtotals | 42618 | 784 | 6384 | -+----------------------------+-------+-------+------+ -Allocated Heap: unknown -Allocated Stack: unknown -Total Static RAM memory (data + bss): 7168 bytes -Total RAM memory (data + bss + heap + stack): 7168 bytes -Total Flash memory (text + data + misc): 43402 bytes -Image: .\.build\K64F\ARM\mbed-os-example-blinky.bin -``` - -### Program your board - -1. Connect your mbed device to the computer over USB. -1. Copy the binary file to the mbed device . -1. Press the reset button to start the program. - -You should see the LED of your platform turning on and off. - -Congratulations if you managed to complete this test! - -## Export the project to Keil MDK and debug your application - -From the command line, run the following command: - -``` -mbed export -m K64F -i uvision -``` - -To debug the application: - -1. Start uVision. -1. Import the uVision project generated earlier. -1. Compile your application and generate an `.axf` file. -1. Make sure uVision is configured to debug over CMSIS-DAP (From the Project menu > Options for Target '...' > Debug tab > Use CMSIS-DAP Debugger). -1. Set breakpoints and start a debug session. - - - -## Troubleshooting - -1. Make sure `mbed-cli` is working correctly and its version is `>1.0.0` - - ``` - mbed --version - ``` - - If not, you can update it easily: - - ``` - pip install mbed-cli --upgrade - ``` - -2. If using Keil MDK, make sure you have a license installed. [MDK-Lite](http://www.keil.com/arm/mdk.asp) has a 32KB restriction on code size.
--- a/main.c Sat Feb 25 00:23:53 2017 +0000
+++ b/main.c Sat Feb 25 09:03:15 2017 +0000
@@ -1,55 +1,60 @@
#define USE_STM32L476G_DISCO_REVC
#include "stm32l476g_discovery.h"
-#include "stm32l4xx_hal.h"
+#include "stm32l476g_discovery_glass_lcd.h"
+
-TIM_HandleTypeDef hTim;
-TIM_OC_InitTypeDef timOutChannel;
-RCC_ClkInitTypeDef RCC_ClkInitStruct;
-
+/************** TODO **********************
+ - Find and fix bug in ADC initialization code
+ - Perform actual measurement
+ - Output actual calibrated temperature value (RTFM)
+*/
int main()
{
- // Configure Timer base
- __HAL_RCC_TIM1_CLK_ENABLE();
-
- hTim.Instance = TIM1;
- hTim.Init.Prescaler = 8000;
- hTim.Init.Period = 10000;
- hTim.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
- hTim.Init.CounterMode = TIM_COUNTERMODE_UP;
- hTim.Init.RepetitionCounter = 0;
- HAL_TIM_PWM_Init(&hTim);
-
- // Configure Timer channel
- timOutChannel.OCMode = TIM_OCMODE_PWM1;
- timOutChannel.OCPolarity = TIM_OCPOLARITY_HIGH;
- timOutChannel.OCFastMode = TIM_OCFAST_DISABLE;
- timOutChannel.OCNPolarity = TIM_OCNPOLARITY_HIGH;
- timOutChannel.OCNIdleState = TIM_OCNIDLESTATE_RESET;
- timOutChannel.OCIdleState = TIM_OCIDLESTATE_RESET;
- timOutChannel.Pulse = 5000;
- HAL_TIM_PWM_ConfigChannel(&hTim, &timOutChannel, TIM_CHANNEL_1);
- HAL_TIMEx_OCN_Start(&hTim, TIM_CHANNEL_1);
+ //Init and test LCD
+ BSP_LCD_GLASS_Init();
+ BSP_LCD_GLASS_DisplayBar(LCD_BAR_3);
+
+ __HAL_RCC_ADC_CLK_ENABLE();
+ __HAL_RCC_ADC_FORCE_RESET();
+ __HAL_RCC_ADC_RELEASE_RESET();
+ __HAL_RCC_ADC_CONFIG(RCC_ADCCLKSOURCE_SYSCLK);
+
+ ADC_HandleTypeDef hAdc;
+ hAdc.Instance = ADC1;
+ hAdc.Init.ClockPrescaler = ADC_CLOCK_ASYNC_DIV256;
+ hAdc.Init.Resolution = ADC_RESOLUTION_12B;
+ hAdc.Init.DataAlign = ADC_DATAALIGN_RIGHT;
+ hAdc.Init.ScanConvMode = ADC_SCAN_DISABLE;
+ hAdc.Init.EOCSelection = ADC_EOC_SINGLE_CONV;
+ hAdc.Init.LowPowerAutoWait = DISABLE;
+ hAdc.Init.ContinuousConvMode = DISABLE;
+ hAdc.Init.ExternalTrigConv = ADC_SOFTWARE_START;
+ hAdc.Init.Overrun = ADC_OVR_DATA_OVERWRITTEN;
+ hAdc.Init.OversamplingMode = DISABLE;
+
+ ADC_ChannelConfTypeDef adcChannel;
+ adcChannel.Channel = ADC_CHANNEL_VBAT;
+ adcChannel.Rank = ADC_REGULAR_RANK_1;
+ adcChannel.SamplingTime = ADC_SAMPLETIME_247CYCLES_5;
+ adcChannel.SingleDiff = ADC_SINGLE_ENDED;
+ adcChannel.OffsetNumber = ADC_OFFSET_NONE;
+
+ HAL_ADC_Init(&hAdc);
+ HAL_ADC_ConfigChannel(&hAdc,&adcChannel);
+
+ HAL_ADCEx_Calibration_Start(&hAdc,ADC_SINGLE_ENDED);
- // Configure GPIO
- LED5_GPIO_CLK_ENABLE();
- GPIO_InitTypeDef gpio;
-
- gpio.Mode = GPIO_MODE_AF_PP;
- gpio.Pull = GPIO_NOPULL;
- gpio.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
- gpio.Alternate = GPIO_AF1_TIM1;
- gpio.Pin = LED5_PIN;
- HAL_GPIO_Init(LED5_GPIO_PORT, &gpio);
-
- //Start timer
- HAL_TIM_Base_Start(&hTim);
- HAL_TIM_PWM_Start(&hTim, TIM_CHANNEL_1);
-
- while(1) {}
+ while(1) {
+ /// TBD: Start ADC, wait for end of onversion, read value
+ uint8_t text[7];
+
+ snprintf((char *)text, sizeof text,"%+04d~C", -999);
+ BSP_LCD_GLASS_DisplayChar(&text[0], POINT_OFF, DOUBLEPOINT_OFF,LCD_DIGIT_POSITION_1);
+ BSP_LCD_GLASS_DisplayChar(&text[1], POINT_OFF, DOUBLEPOINT_OFF,LCD_DIGIT_POSITION_2);
+ BSP_LCD_GLASS_DisplayChar(&text[2], POINT_ON, DOUBLEPOINT_OFF,LCD_DIGIT_POSITION_3);
+ BSP_LCD_GLASS_DisplayChar(&text[3], POINT_OFF, DOUBLEPOINT_OFF,LCD_DIGIT_POSITION_4);
+ BSP_LCD_GLASS_DisplayChar(&text[4], POINT_OFF, DOUBLEPOINT_OFF,LCD_DIGIT_POSITION_5);
+ BSP_LCD_GLASS_DisplayChar(&text[5], POINT_OFF, DOUBLEPOINT_OFF,LCD_DIGIT_POSITION_6);
+ HAL_Delay(500);
+ }
}
-
-/************** TODO **********************
- - Increase frequency
- - Control pwm brightness with joystick
-
-*/