MxRadioCfg.h

00001 /* Copyright (c) 2011 Frank Zhao
00002    All rights reserved.
00003 
00004    Redistribution and use in source and binary forms, with or without
00005    modification, are permitted provided that the following conditions
00006    are met:
00007 
00008    * Redistributions of source code must retain the above copyright
00009      notice, this list of conditions and the following disclaimer.
00010    * Redistributions in binary form must reproduce the above copyright
00011      notice, this list of conditions and the following disclaimer in the
00012      documentation and/or other materials provided with the distribution.
00013    * Neither the name of the authors nor the names of its contributors
00014      may be used to endorse or promote products derived from this software
00015      without specific prior written permission.
00016 
00017    THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
00018    AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
00019    IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
00020    ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
00021    LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
00022    CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
00023    SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
00024    INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
00025    CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
00026    ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
00027    POSSIBILITY OF SUCH DAMAGE. */
00028 
00029 #ifndef MxRadioCfg_h
00030 
00031 #define RADIO_TYPE  RADIO_AT86RF231 //RADIO_AT86RF212
00032 //#define CHINABAND
00033 #define MxRadioCfg_h
00034 
00035 //#define ENABLE_DIG3_DIG4 // this enables the DIG3 and DIG4 indicators by enabling PA_EXT_EN
00036 
00037 // define the LED behaviour macros here
00038 // leave them blank if you want to disable the LEDs
00039 // PD5 and PD6 are used on the Zigduino
00040 #define ZR_RFRX_LED_OUTPUT() //do{DDRD|=_BV(6);}while(0)
00041 #define ZR_RFTX_LED_OUTPUT() //do{DDRD|=_BV(5);}while(0)
00042 #define ZR_RFRX_LED_ON() //do{PORTD|=_BV(6);}while(0)
00043 #define ZR_RFTX_LED_ON() //do{PORTD|=_BV(5);}while(0)
00044 #define ZR_RFRX_LED_OFF() //do{PORTD&=~_BV(6);}while(0)
00045 #define ZR_RFTX_LED_OFF() //do{PORTD&=~_BV(5);}while(0)
00046 
00047 #define MxRadioCfg_h
00048 #endif