Revision 0:2bd507b775d3, committed 2018-04-06

Comitter:

Wonderjack996

Date:

Fri Apr 06 10:57:42 2018 +0000

Commit message:

Programma Siren

Changed in this revision

diff -r 000000000000 -r 2bd507b775d3 .gitignore
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/.gitignore	Fri Apr 06 10:57:42 2018 +0000
@@ -0,0 +1,4 @@
+.build
+.mbed
+projectfiles
+*.py*

diff -r 000000000000 -r 2bd507b775d3 README.md
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/README.md	Fri Apr 06 10:57:42 2018 +0000
@@ -0,0 +1,87 @@
+# Getting started with Blinky on mbed OS
+
+This guide reviews the steps required to get Blinky working on an mbed OS platform.
+
+Please install [mbed CLI](https://github.com/ARMmbed/mbed-cli#installing-mbed-cli).
+
+## Import the example application
+
+From the command-line, import the example:
+
+```
+mbed import mbed-os-example-blinky
+cd mbed-os-example-blinky
+```
+
+### Now compile
+
+Invoke `mbed compile`, and specify the name of your platform and your favorite toolchain (`GCC_ARM`, `ARM`, `IAR`). For example, for the ARM Compiler 5:
+
+```
+mbed compile -m K64F -t ARM
+```
+
+Your PC may take a few minutes to compile your code. At the end, you see the following result:
+
+```
+[snip]
++----------------------------+-------+-------+------+
+| Module                     | .text | .data | .bss |
++----------------------------+-------+-------+------+
+| Misc                       | 13939 |    24 | 1372 |
+| core/hal                   | 16993 |    96 |  296 |
+| core/rtos                  |  7384 |    92 | 4204 |
+| features/FEATURE_IPV4      |    80 |     0 |  176 |
+| frameworks/greentea-client |  1830 |    60 |   44 |
+| frameworks/utest           |  2392 |   512 |  292 |
+| Subtotals                  | 42618 |   784 | 6384 |
++----------------------------+-------+-------+------+
+Allocated Heap: unknown
+Allocated Stack: unknown
+Total Static RAM memory (data + bss): 7168 bytes
+Total RAM memory (data + bss + heap + stack): 7168 bytes
+Total Flash memory (text + data + misc): 43402 bytes
+Image: .\.build\K64F\ARM\mbed-os-example-blinky.bin
+```
+
+### Program your board
+
+1. Connect your mbed device to the computer over USB.
+1. Copy the binary file to the mbed device.
+1. Press the reset button to start the program.
+
+The LED on your platform turns on and off.
+
+## Export the project to Keil MDK, and debug your application
+
+From the command-line, run the following command:
+
+```
+mbed export -m K64F -i uvision
+```
+
+To debug the application:
+
+1. Start uVision.
+1. Import the uVision project generated earlier.
+1. Compile your application, and generate an `.axf` file.
+1. Make sure uVision is configured to debug over CMSIS-DAP (From the Project menu > Options for Target '...' > Debug tab > Use CMSIS-DAP Debugger).
+1. Set breakpoints, and start a debug session.
+
+![Image of uVision](img/uvision.png)
+
+## Troubleshooting
+
+1. Make sure `mbed-cli` is working correctly and its version is `>1.0.0`
+
+ ```
+ mbed --version
+ ```
+
+ If not, you can update it:
+
+ ```
+ pip install mbed-cli --upgrade
+ ```
+
+2. If using Keil MDK, make sure you have a license installed. [MDK-Lite](http://www.keil.com/arm/mdk.asp) has a 32 KB restriction on code size.
\ No newline at end of file

diff -r 000000000000 -r 2bd507b775d3 main.cpp
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp	Fri Apr 06 10:57:42 2018 +0000
@@ -0,0 +1,76 @@
+#include "mbed.h"
+#include "TCPSocket.h"
+#include "EthernetInterface.h"
+
+#define MY_DEFAULT_IP_ADDR        "10.51.23." 
+#define MY_DEFAULT_MASK           "255.255.255.0"
+#define MY_DEFAULT_GATEWAY        "10.51.23.254"
+
+#define MESSAGE_RUN      "RUN"
+#define MESSAGE_IDLE     "IDLE"
+
+//new server windows 2012 ctosw00014.cto.st.com
+#define SIREN_SERVER_NAME   "10.51.37.30"
+#define SIREN_SERVER_PORT   8897
+
+#define LWIP_ICMP               1 
+#define MEMP_NUM_SYS_TIMEOUT        16
+
+#if defined(TARGET_ARCH_MAX)
+#define CHECKSUM_GEN_ICMP           0
+#endif
+
+#if !CHECKSUM_GEN_ICMP
+    iecho->chksum = 0;
+#endif 
+
+DigitalIn bit0(D9);
+DigitalIn bit1(D8);
+DigitalIn bit2(D7);
+DigitalIn bit3(D6);
+DigitalIn bit4(D5);
+DigitalIn bit5(D4);
+DigitalIn bit6(D3);
+DigitalIn bit7(D2);
+
+DigitalIn configurazione_rele(PB_11); //NO - 1, NC - 0
+DigitalIn rele_ventola(PB_10);
+DigitalIn semaforo_1(PE_10);
+DigitalIn semaforo_2(PE_12);
+DigitalIn semaforo_3(PE_14);
+DigitalIn semaforo_4(PE_15);
+DigitalIn alimentazione(PE_7);
+
+EthernetInterface eth;
+TCPSocket socket;
+
+int main()
+{
+    char ip_scheda[100];
+    int val = (1*bit0.read())+(2*bit1.read())+(4*bit2.read())+(8*bit3.read())+(16*bit4.read())+(32*bit5.read())+(64*bit6.read())+(128*bit7.read());
+    sprintf(ip_scheda, "%s%d",MY_DEFAULT_IP_ADDR,val);
+
+    eth.set_network(ip_scheda, MY_DEFAULT_MASK, MY_DEFAULT_GATEWAY);
+    eth.connect();
+    const char *ip = eth.get_ip_address();
+    printf("IP address is: %s\n\r", ip ? ip : "No IP");
+    
+    while(true)
+        printf("valore: %d\n\r", rele_ventola.read());
+
+    // Open a socket on the network interface, and create a TCP connection to mbed.org
+    socket.open(&eth);
+    socket.connect(SIREN_SERVER_NAME, SIREN_SERVER_PORT);
+
+    // Send a simple http request
+    char sbuffer[] = "alarm";
+    int scount = socket.send(sbuffer, sizeof sbuffer);
+    printf("sent %d [%.*s]\r\n", scount, strstr(sbuffer, "\r\n")-sbuffer, sbuffer);
+
+    // Close the socket to return its memory and bring down the network interface
+    socket.close();
+    eth.disconnect();
+
+    printf("Done\n");
+}
+

diff -r 000000000000 -r 2bd507b775d3 mbed-os.lib
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed-os.lib	Fri Apr 06 10:57:42 2018 +0000
@@ -0,0 +1,1 @@
+https://github.com/ARMmbed/mbed-os/#98ba8acb83cfc65f30a8a0771a27c71443ab093a