Diff: targets/TARGET_TOSHIBA/TARGET_TMPM46B/PeripheralNames.h

Revision:

184:08ed48f1de7f

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/TARGET_TOSHIBA/TARGET_TMPM46B/PeripheralNames.h	Thu Apr 19 17:12:19 2018 +0100
@@ -0,0 +1,119 @@
+/* mbed Microcontroller Library
+ * (C)Copyright TOSHIBA ELECTRONIC DEVICES & STORAGE CORPORATION 2017 All rights reserved
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PERIPHERALNAMES_H
+#define MBED_PERIPHERALNAMES_H
+
+#include "PinNames.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+    SERIAL_0 = 0,
+    SERIAL_1,
+    SERIAL_2,
+    SERIAL_3,
+    SERIAL_4,
+    SERIAL_5,
+    INVALID_SERIAL = (int)NC
+} UARTName;
+
+typedef enum {
+    ADC_A0,
+    ADC_A1,
+    ADC_A2,
+    ADC_A3,
+    ADC_A4,
+    ADC_A5,
+    ADC_A6,
+    ADC_A7,
+    INVALID_ADC = (int)NC
+} ADCName;
+
+typedef enum {
+    SPI_0 = 0,
+    SPI_1,
+    SPI_2,
+    INVALID_SPI = (int)NC
+} SPIName;
+
+typedef enum {
+    I2C_0 = 0,
+    I2C_1,
+    I2C_2,
+    INVALID_I2C = (int)NC
+} I2CName;
+
+typedef enum {
+    PWM_0 = 0,
+    PWM_1,
+    PWM_2,
+    PWM_3,
+    PWM_4,
+    PWM_5,
+    INVALID_PWM = (int)NC
+} PWMName;
+
+typedef enum {
+    GPIO_IRQ_0 = 1,
+    GPIO_IRQ_1 = 2,
+    GPIO_IRQ_2 = 7,
+    GPIO_IRQ_3 = 8,
+    GPIO_IRQ_4 = 13,
+    GPIO_IRQ_5 = 14,
+    GPIO_IRQ_6 = 15,
+    INVALID_GPIO_IRQ = (int)NC
+} GPIO_IRQName;
+
+#define STDIO_UART_TX     PE5
+#define STDIO_UART_RX     PE6
+#define STDIO_UART        SERIAL_1
+
+#define MBED_SPI0         PK3, PK2, PK4, PK1
+#define MBED_SPI1         PF4, PF5, PF3, PF6
+#define MBED_SPI2         PD2, PD1, PD3, PD0
+
+#define MBED_UART0        PE2, PE1
+#define MBED_UART1        PE5, PE6
+#define MBED_UART2        PL2, PL1
+#define MBED_UART3        PB0, PB1
+#define MBED_UART4        PF1, PF2
+#define MBED_UART5        PA6, PA5
+#define MBED_UARTUSB      USBTX, USBRX
+
+#define MBED_I2C0         PK2, PK3
+#define MBED_I2C1         PF7, PF6
+#define MBED_I2C2         PH0, PH1
+
+#define MBED_ANALOGIN0    A0
+#define MBED_ANALOGIN1    A1
+#define MBED_ANALOGIN2    A2
+#define MBED_ANALOGIN3    A3
+#define MBED_ANALOGIN4    A4
+#define MBED_ANALOGIN5    A5
+
+#define MBED_PWMOUT0      PE4
+#define MBED_PWMOUT1      PB6
+#define MBED_PWMOUT2      PH1
+#define MBED_PWMOUT3      PH0
+#define MBED_PWMOUT4      PA7
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif