Diff: bh1790glc_registers.h

Revision:

1:32bb2624bed8

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/bh1790glc_registers.h	Fri Jun 16 11:56:37 2017 +0000
@@ -0,0 +1,94 @@
+/*
+The MIT License (MIT)
+Copyright (c) 2017 Rohm Semiconductor
+
+Permission is hereby granted, free of charge, to any person obtaining a
+copy of this software and associated documentation files (the
+"Software"), to deal in the Software without restriction, including
+without limitation the rights to use, copy, modify, merge, publish,
+distribute, sublicense, and/or sell copies of the Software, and to
+permit persons to whom the Software is furnished to do so, subject to
+the following conditions:
+
+The above copyright notice and this permission notice shall be included
+in all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
+CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
+TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
+SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+*/
+
+#ifndef __BH1790GLC_REGISTERS_H__
+#define __BH1790GLC_REGISTERS_H__
+/* registers */
+#define BH1790GLC_REGISTER_DUMP_START 0x0F
+#define BH1790GLC_MANUFACTURER_ID 0x0F
+#define BH1790GLC_PART_ID 0x10
+// Soft reset
+#define BH1790GLC_RESET 0x40
+// System control setting
+#define BH1790GLC_MEAS_CONTROL1 0x41
+// Measurement control setting
+#define BH1790GLC_MEAS_CONTROL2 0x42
+// Measurement start
+#define BH1790GLC_MEAS_START 0x43
+#define BH1790GLC_DATAOUT_LEDOFF_L 0x54
+#define BH1790GLC_DATAOUT_LEDOFF_H 0x55
+#define BH1790GLC_DATAOUT_LEDON_L 0x56
+// Restarts measurement.
+#define BH1790GLC_DATAOUT_LEDON_H 0x57
+#define BH1790GLC_REGISTER_DUMP_END 0x57
+/* registers bits */
+// WHO_AM_I -value
+#define BH1790GLC_PART_ID_WIA_ID (0x0D << 0)
+// 1 : Software reset is performed
+#define BH1790GLC_RESET_SWRESET (0x01 << 7)
+// OSC block is inactive
+#define BH1790GLC_MEAS_CONTROL1_RDY_DISABLE (0x00 << 7)
+// OSC block is active
+#define BH1790GLC_MEAS_CONTROL1_RDY_ENABLE (0x01 << 7)
+#define BH1790GLC_MEAS_CONTROL1_LED_LIGHTING_FREQ_128HZ (0x00 << 2)
+#define BH1790GLC_MEAS_CONTROL1_LED_LIGHTING_FREQ_64HZ (0x01 << 2)
+#define BH1790GLC_MEAS_CONTROL1_RCYCLE_PROHIBITED1 (0x00 << 0)
+#define BH1790GLC_MEAS_CONTROL1_RCYCLE_64HZ (0x01 << 0)
+#define BH1790GLC_MEAS_CONTROL1_RCYCLE_32HZ (0x02 << 0)
+#define BH1790GLC_MEAS_CONTROL1_RCYCLE_PROHIBITED2 (0x03 << 0)
+#define BH1790GLC_MEAS_CONTROL2_LED2_EN_PULSED (0x00 << 7)
+#define BH1790GLC_MEAS_CONTROL2_LED2_EN_CONSTANT (0x01 << 7)
+#define BH1790GLC_MEAS_CONTROL2_LED1_EN_PULSED (0x00 << 6)
+#define BH1790GLC_MEAS_CONTROL2_LED1_EN_CONSTANT (0x01 << 6)
+// us
+#define BH1790GLC_MEAS_CONTROL2_LED_ON_TIME_216T_OSC (0x00 << 5)
+// us
+#define BH1790GLC_MEAS_CONTROL2_LED_ON_TIME_432T_OSC (0x01 << 5)
+#define BH1790GLC_MEAS_CONTROL2_LED_CURRENT_0MA (0x00 << 0)
+#define BH1790GLC_MEAS_CONTROL2_LED_CURRENT_1MA (0x08 << 0)
+#define BH1790GLC_MEAS_CONTROL2_LED_CURRENT_2MA (0x09 << 0)
+#define BH1790GLC_MEAS_CONTROL2_LED_CURRENT_3MA (0x0A << 0)
+#define BH1790GLC_MEAS_CONTROL2_LED_CURRENT_6MA (0x0B << 0)
+#define BH1790GLC_MEAS_CONTROL2_LED_CURRENT_10MA (0x0C << 0)
+#define BH1790GLC_MEAS_CONTROL2_LED_CURRENT_20MA (0x0D << 0)
+#define BH1790GLC_MEAS_CONTROL2_LED_CURRENT_30MA (0x0E << 0)
+#define BH1790GLC_MEAS_CONTROL2_LED_CURRENT_60MA (0x0F << 0)
+#define BH1790GLC_MEAS_START_MEAS_ST_STOP (0x00 << 0)
+#define BH1790GLC_MEAS_START_MEAS_ST_START (0x01 << 0)
+ /*registers bit masks */
+#define BH1790GLC_PART_ID_WIA_MASK 0xFF
+// 1 : OSC block is active
+#define BH1790GLC_MEAS_CONTROL1_RDY_MASK 0x80
+// Select LED omitting frequency
+#define BH1790GLC_MEAS_CONTROL1_LED_LIGHTING_FREQ_MASK 0x04
+#define BH1790GLC_MEAS_CONTROL1_RCYCLE_MASK 0x03
+#define BH1790GLC_MEAS_CONTROL2_LED2_EN_MASK 0x80
+#define BH1790GLC_MEAS_CONTROL2_LED1_EN_MASK 0x40
+#define BH1790GLC_MEAS_CONTROL2_LED_ON_TIME_MASK 0x20
+// LED lighting current
+#define BH1790GLC_MEAS_CONTROL2_LED_CURRENT_MASK 0x0F
+#define BH1790GLC_MEAS_START_MEAS_ST_MASK 0x01
+#endif
+
+