Diff: BLE_BlueNRG/hci/src/bluenrg_shield_bsp.c

Revision:

0:3d641e170a74

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/BLE_BlueNRG/hci/src/bluenrg_shield_bsp.c	Tue May 19 16:43:59 2015 +0000
@@ -0,0 +1,399 @@
+/**
+******************************************************************************
+* File Name          : bluenrg_shield_bsp.c
+* Date               : 16/05/2014
+* Description        : This file provides code for the BlueNRG Shield driver
+*                      based on STM32Cube HAL for STM32 Nucleo boards.
+******************************************************************************
+*
+* COPYRIGHT(c) 2014 STMicroelectronics
+*
+* Redistribution and use in source and binary forms, with or without modification,
+* are permitted provided that the following conditions are met:
+*   1. Redistributions of source code must retain the above copyright notice,
+*      this list of conditions and the following disclaimer.
+*   2. Redistributions in binary form must reproduce the above copyright notice,
+*      this list of conditions and the following disclaimer in the documentation
+*      and/or other materials provided with the distribution.
+*   3. Neither the name of STMicroelectronics nor the names of its contributors
+*      may be used to endorse or promote products derived from this software
+*      without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+******************************************************************************
+*/
+/* Includes ------------------------------------------------------------------*/
+#include "cube_hal.h"
+#include "hci.h"
+
+/*//#ifdef USE_STM32F4XX_NUCLEO
+  //#include "stm32f4xx_bluenrg_shield_bsp.h"
+//#else
+  //#ifdef USE_STM32L0XX_NUCLEO
+    //#include "stm32l0xx_bluenrg_shield_bsp.h"
+  //#endif
+//#endif*/
+
+
+/** @addtogroup BlueNRG_Shield
+ *  @{
+ */
+
+/** @defgroup BlueNRG_Shield_Driver
+ *  @brief BlueNRG Shield driver based on STM32Cube HAL for STM32 Nucleo boards.
+ *  @{
+ */
+
+
+/* SPI handler declared in "main.c" file */
+extern SPI_HandleTypeDef SpiHandle;
+
+
+/**
+ * @brief  This function is used for low level initialization of the SPI 
+ *         communication with the BlueNRG Shield.
+ * @param  hspi: handle of the STM32Cube HAL SPI interface
+ * @retval None
+ */
+void HAL_SPI_MspInit(SPI_HandleTypeDef* hspi)
+{
+  GPIO_InitTypeDef GPIO_InitStruct;
+  if(hspi->Instance==BNRG_SPI_INSTANCE)
+  {
+    /* Enable peripherals clock */
+    
+    /* Enable GPIO Ports Clock */  
+    BNRG_SPI_RESET_CLK_ENABLE();
+    BNRG_SPI_SCLK_CLK_ENABLE();
+    BNRG_SPI_MISO_CLK_ENABLE();
+    BNRG_SPI_MOSI_CLK_ENABLE();
+    BNRG_SPI_CS_CLK_ENABLE();
+    BNRG_SPI_IRQ_CLK_ENABLE();
+    
+    /* Enable SPI clock */
+    BNRG_SPI_CLK_ENABLE();
+    
+    /* Reset */
+    GPIO_InitStruct.Pin = BNRG_SPI_RESET_PIN;
+    GPIO_InitStruct.Mode = BNRG_SPI_RESET_MODE;
+    GPIO_InitStruct.Pull = BNRG_SPI_RESET_PULL;
+    GPIO_InitStruct.Speed = BNRG_SPI_RESET_SPEED;
+    GPIO_InitStruct.Alternate = BNRG_SPI_RESET_ALTERNATE;
+    HAL_GPIO_Init(BNRG_SPI_RESET_PORT, &GPIO_InitStruct);	
+    HAL_GPIO_WritePin(BNRG_SPI_RESET_PORT, BNRG_SPI_RESET_PIN, GPIO_PIN_RESET);	/*Added to avoid spurious interrupt from the BlueNRG */
+    
+    /* SCLK */
+    GPIO_InitStruct.Pin = BNRG_SPI_SCLK_PIN;
+    GPIO_InitStruct.Mode = BNRG_SPI_SCLK_MODE;
+    GPIO_InitStruct.Pull = BNRG_SPI_SCLK_PULL;
+    GPIO_InitStruct.Speed = BNRG_SPI_SCLK_SPEED;
+    GPIO_InitStruct.Alternate = BNRG_SPI_SCLK_ALTERNATE;
+    HAL_GPIO_Init(BNRG_SPI_SCLK_PORT, &GPIO_InitStruct); 
+    
+    /* MISO */
+    GPIO_InitStruct.Pin = BNRG_SPI_MISO_PIN;
+    GPIO_InitStruct.Mode = BNRG_SPI_MISO_MODE;
+    GPIO_InitStruct.Pull = BNRG_SPI_MISO_PULL;
+    GPIO_InitStruct.Speed = BNRG_SPI_MISO_SPEED;
+    GPIO_InitStruct.Alternate = BNRG_SPI_MISO_ALTERNATE;
+    HAL_GPIO_Init(BNRG_SPI_MISO_PORT, &GPIO_InitStruct);
+    
+    /* MOSI */
+    GPIO_InitStruct.Pin = BNRG_SPI_MOSI_PIN;
+    GPIO_InitStruct.Mode = BNRG_SPI_MOSI_MODE;
+    GPIO_InitStruct.Pull = BNRG_SPI_MOSI_PULL;
+    GPIO_InitStruct.Speed = BNRG_SPI_MOSI_SPEED;
+    GPIO_InitStruct.Alternate = BNRG_SPI_MOSI_ALTERNATE;
+    HAL_GPIO_Init(BNRG_SPI_MOSI_PORT, &GPIO_InitStruct);
+    
+    /* NSS/CSN/CS */
+    GPIO_InitStruct.Pin = BNRG_SPI_CS_PIN;
+    GPIO_InitStruct.Mode = BNRG_SPI_CS_MODE;
+    GPIO_InitStruct.Pull = BNRG_SPI_CS_PULL;
+    GPIO_InitStruct.Speed = BNRG_SPI_CS_SPEED;
+    GPIO_InitStruct.Alternate = BNRG_SPI_CS_ALTERNATE;
+    HAL_GPIO_Init(BNRG_SPI_CS_PORT, &GPIO_InitStruct);
+    HAL_GPIO_WritePin(BNRG_SPI_CS_PORT, BNRG_SPI_CS_PIN, GPIO_PIN_SET);
+    
+    /* IRQ -- INPUT */
+    GPIO_InitStruct.Pin = BNRG_SPI_IRQ_PIN;
+    GPIO_InitStruct.Mode = BNRG_SPI_IRQ_MODE;
+    GPIO_InitStruct.Pull = BNRG_SPI_IRQ_PULL;
+    GPIO_InitStruct.Speed = BNRG_SPI_IRQ_SPEED;
+    GPIO_InitStruct.Alternate = BNRG_SPI_IRQ_ALTERNATE;
+    HAL_GPIO_Init(BNRG_SPI_IRQ_PORT, &GPIO_InitStruct);
+    
+    /* Configure the NVIC for SPI */  
+    HAL_NVIC_SetPriority(BNRG_SPI_EXTI_IRQn, 4, 0);    
+    HAL_NVIC_EnableIRQ(BNRG_SPI_EXTI_IRQn);
+  }
+}
+
+/**
+ * @brief EXTI line detection callback.
+ * @param GPIO_Pin: Specifies the pins connected EXTI line
+ * @retval None
+ */
+void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin)
+{
+  tHciDataPacket * hciReadPacket = NULL;
+  uint8_t data_len;
+  /* 
+   * No need to call Clear_SPI_EXTI_Flag() here as
+   * HAL_GPIO_EXTI_IRQHandler() already does it
+   */
+    
+  if(GPIO_Pin == BNRG_SPI_EXTI_PIN) {
+    
+    while (HAL_GPIO_ReadPin(BNRG_SPI_EXTI_PORT, BNRG_SPI_EXTI_PIN) == GPIO_PIN_SET) {
+      if (list_is_empty (&hciReadPktPool) == FALSE){
+        /* enqueueing a packet for read */
+        list_remove_head (&hciReadPktPool, (tListNode **)&hciReadPacket);
+        data_len = BlueNRG_SPI_Read_All(&SpiHandle, hciReadPacket->dataBuff, HCI_PACKET_SIZE);
+        
+        if(data_len > 0){
+          /* Packet will be inserted to the correct queue */
+          HCI_Input(hciReadPacket);
+        } else {
+          /* Insert the packet back into the pool */
+          list_insert_head(&hciReadPktPool, (tListNode *)hciReadPacket);
+        }
+        
+      } else{
+        /* TODO: HCI Read Packet Pool is empty, wait for a free packet */
+      }
+      
+      Clear_SPI_EXTI_Flag();
+    }
+  }
+}
+
+
+/**
+* @brief  This function is used to initialize the SPI communication with
+*         the BlueNRG Shield.
+* @param  None
+* @retval None
+*/
+void BNRG_SPI_Init(void)
+{
+  SpiHandle.Instance = BNRG_SPI_INSTANCE;
+  SpiHandle.Init.Mode = BNRG_SPI_MODE;
+  SpiHandle.Init.Direction = BNRG_SPI_DIRECTION;
+  SpiHandle.Init.DataSize = BNRG_SPI_DATASIZE;
+  SpiHandle.Init.CLKPolarity = BNRG_SPI_CLKPOLARITY;
+  SpiHandle.Init.CLKPhase = BNRG_SPI_CLKPHASE;
+  SpiHandle.Init.NSS = BNRG_SPI_NSS;
+  SpiHandle.Init.FirstBit = BNRG_SPI_FIRSTBIT;
+  SpiHandle.Init.TIMode = BNRG_SPI_TIMODE;
+  SpiHandle.Init.CRCPolynomial = BNRG_SPI_CRCPOLYNOMIAL;
+  SpiHandle.Init.BaudRatePrescaler = BNRG_SPI_BAUDRATEPRESCALER;
+  SpiHandle.Init.CRCCalculation = BNRG_SPI_CRCCALCULATION;
+  
+  HAL_SPI_Init(&SpiHandle);
+}
+
+/**
+* @brief  Read from BlueNRG SPI buffer and store data into local buffer
+* @param  hspi:      handle of the STM32Cube HAL SPI interface
+* @param  buffer:    buffer where data from SPI are stored
+* @param  buff_size: buffer size
+* @retval number of read bytes
+*/
+int32_t BlueNRG_SPI_Read_All(SPI_HandleTypeDef *hspi, uint8_t *buffer, uint8_t buff_size)
+{
+  uint16_t byte_count;
+  uint8_t len = 0;
+  uint8_t i = 0;
+  uint8_t char_ff = 0xff;
+  volatile uint8_t read_char;
+  
+  uint8_t header_master[5] = {0x0b, 0x00, 0x00, 0x00, 0x00};
+  uint8_t header_slave[5];
+  
+  /* CS reset */
+  HAL_GPIO_WritePin(BNRG_SPI_CS_PORT, BNRG_SPI_CS_PIN, GPIO_PIN_RESET);
+  
+  /* Read the header */
+  for (i = 0; i < 5; i++)
+  { 
+    HAL_SPI_TransmitReceive(hspi, &header_master[i], &header_slave[i], 1, 15);
+  }    
+  
+  
+  if (header_slave[0] == 0x02) {
+    /* device is ready */
+    byte_count = (header_slave[4]<<8)|header_slave[3];
+    
+    if (byte_count > 0) {
+      
+      /* avoid to read more data that size of the buffer */
+      if (byte_count > buff_size){
+        byte_count = buff_size;
+      }
+      
+      for (len = 0; len < byte_count; len++){
+        HAL_SPI_TransmitReceive(hspi, &char_ff, (uint8_t*)&read_char, 1, 15);
+        buffer[len] = read_char;
+      }    
+    }    
+  }
+  /* Release CS line */
+  HAL_GPIO_WritePin(BNRG_SPI_CS_PORT, BNRG_SPI_CS_PIN, GPIO_PIN_SET);
+  
+  return len;   
+}
+
+/**
+* @brief  Write data from local buffer to SPI
+* @param  hspi:      handle of the STM32Cube HAL SPI interface
+* @param  data1:     first data buffer to be written
+* @param  data2:     second data buffer to be written
+* @param  Nb_bytes1: size of first data buffer to be written
+* @param  Nb_bytes2: size of second data buffer to be written
+* @retval number of read bytes
+*/
+int32_t BlueNRG_SPI_Write(SPI_HandleTypeDef *hspi, uint8_t* data1, uint8_t* data2, uint8_t Nb_bytes1, uint8_t Nb_bytes2)
+{  
+  uint32_t i;
+  uint8_t read_char;
+  int32_t result = 0;
+  
+  unsigned char header_master[5] = {0x0a, 0x00, 0x00, 0x00, 0x00};
+  unsigned char header_slave[5]  = {0xaa, 0x00, 0x00, 0x00, 0x00};
+  
+  Disable_SPI_IRQ();
+  
+  /* CS reset */
+  HAL_GPIO_WritePin(BNRG_SPI_CS_PORT, BNRG_SPI_CS_PIN, GPIO_PIN_RESET);
+  
+  /* Exchange header */
+  
+  
+  for (i = 0; i < 5; i++)
+  { 
+    HAL_SPI_TransmitReceive(hspi, &header_master[i], &header_slave[i], 1, 15);
+  }    
+  
+  
+  if (header_slave[0] == 0x02) {
+    /* SPI is ready */
+    if (header_slave[1] >= (Nb_bytes1+Nb_bytes2)) {
+      /*  Buffer is big enough */
+      for (i = 0; i < Nb_bytes1; i++) {
+        HAL_SPI_TransmitReceive(hspi, (data1 + i), &read_char, 1, 15);
+      }
+      for (i = 0; i < Nb_bytes2; i++) {
+        HAL_SPI_TransmitReceive(hspi, (data2 + i), &read_char, 1, 15);
+      }
+    } else {
+      /* Buffer is too small */
+      result = -2;
+    }
+  } else {
+    /* SPI is not ready */
+    result = -1;
+  }
+  
+  /* Release CS line */
+  HAL_GPIO_WritePin(BNRG_SPI_CS_PORT, BNRG_SPI_CS_PIN, GPIO_PIN_SET);
+  
+  Enable_SPI_IRQ();
+  
+  return result;
+}
+
+/**
+ * Writes data to a serial interface.
+ *
+ * @param  data1    1st buffer
+ * @param  data2    2nd buffer
+ * @param  n_bytes1 number of bytes in 1st buffer
+ * @param  n_bytes2 number of bytes in 2nd buffer
+ */
+void Hal_Write_Serial(const void* data1, const void* data2, tHalInt32 n_bytes1, tHalInt32 n_bytes2)
+{
+  struct timer t;
+  
+  Timer_Set(&t, CLOCK_SECOND/10);
+  
+  while(1){
+    if(BlueNRG_SPI_Write(&SpiHandle, (uint8_t *)data1,(uint8_t *)data2, n_bytes1, n_bytes2)==0) break;
+    if(Timer_Expired(&t)){
+      break;
+    }
+  }
+}
+
+/**
+ * @brief  Disable SPI IRQ
+ * @param  None
+ * @retval None
+ */
+void Disable_SPI_IRQ(void)
+{  
+  HAL_NVIC_DisableIRQ(BNRG_SPI_EXTI_IRQn);
+}
+
+/**
+ * @brief  Enable SPI IRQ
+ * @param  None
+ * @retval None
+ */
+void Enable_SPI_IRQ(void)
+{  
+  HAL_NVIC_EnableIRQ(BNRG_SPI_EXTI_IRQn);  
+}
+
+/**
+ * @brief  Clear Pending SPI IRQ
+ * @param  None
+ * @retval None
+ */
+void Clear_SPI_IRQ(void)
+{
+  HAL_NVIC_ClearPendingIRQ(BNRG_SPI_EXTI_IRQn);
+}
+
+/**
+ * @brief  Clear EXTI (External Interrupt) line for SPI IRQ
+ * @param  None
+ * @retval None
+ */
+void Clear_SPI_EXTI_Flag(void)
+{
+  __HAL_GPIO_EXTI_CLEAR_IT(BNRG_SPI_EXTI_PIN);
+}
+
+/**
+ * @brief  Reset the BlueNRG
+ * @param  None
+ * @retval None
+ */
+void BlueNRG_RST(void)
+{    
+  HAL_GPIO_WritePin(BNRG_SPI_RESET_PORT, BNRG_SPI_RESET_PIN, GPIO_PIN_RESET);
+  HAL_Delay(5);
+  HAL_GPIO_WritePin(BNRG_SPI_RESET_PORT, BNRG_SPI_RESET_PIN, GPIO_PIN_SET);
+  HAL_Delay(5);
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
\ No newline at end of file