Revision 0:17a26d8695b9, committed 2016-05-24

Comitter:

vmjack

Date:

Tue May 24 14:00:46 2016 +0000

Commit message:

5/24 servo project

Changed in this revision

diff -r 000000000000 -r 17a26d8695b9 main.cpp
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp	Tue May 24 14:00:46 2016 +0000
@@ -0,0 +1,107 @@
+// UART TX RX
+#include "mbed.h"
+
+Serial uart_1(D10,D2);           // TX : D10 , RX : D2
+PwmOut mypwm(A0);                // A0 : mypwm output
+
+// uart send data
+int display[6] = {0,0,0,0,0,0};
+char num[14] = {254,255,0,0,0,0,0,0,0,0,0,0,0,0};      // char num[0] , num[1] : 2 start byte
+
+void init_TIMER(void);
+void timer1_interrupt(void);
+void init_uart(void);
+void separate(void);
+
+Ticker timer1;
+
+int main() 
+{
+    init_TIMER();
+    init_uart();
+    mypwm.period_ms(20);      // 設mypwm週期為20ms
+    mypwm.write(0.05);        // 0 deg
+    // duty = 0.05 + (0.05/90)*angle
+    while(1) 
+    {
+        if(uart_1.readable())
+        {
+            switch(uart_1.getc())
+            {
+                case 'a':
+                    mypwm.write(0.05 + (0.05/90)*0);        // 轉0度
+                    break;
+                case 'b':
+                    mypwm.write(0.05 + (0.05/90)*45);       // 轉45度
+                    break;
+                case 'c':
+                    mypwm.write(0.05 + (0.05/90)*90);       // 轉90度
+                    break;
+                default:
+                    mypwm.write(0.05 + (0.05/90)*0);        // 轉0度
+                    break;
+            }
+        }
+    }
+}
+
+int i = 0;
+void timer1_interrupt()
+{
+    // uart send data
+    display[0] = 10;
+    display[1] = 20;
+    display[2] = 30;
+    display[3] = 40;
+    display[4] = 50;
+    display[5] = 60;    
+    
+    separate();
+    
+    int j = 0;
+    int k = 1;
+    while(k)
+    {
+        if(uart_1.writeable())
+        {
+            uart_1.putc(num[i]);
+            i = i + 1;
+            j = j + 1;
+        }
+        
+        if(j>1)
+        {
+            k = 0;
+            j = 0;
+        }
+    }
+    
+    if(i>13)
+        i = 0;
+}
+
+void init_TIMER()
+{
+    timer1.attach_us(&timer1_interrupt, 1000.0);    // 1 ms interrupt period (1 kHz)
+}
+
+void init_uart()
+{
+    uart_1.baud(115200);      // 設定baudrate
+}
+
+void separate(void)
+{
+    num[2] = display[0] >> 8;           // HSB(8bit)資料存入陣列
+    num[3] = display[0] & 0x00ff;       // LSB(8bit)資料存入陣列
+    num[4] = display[1] >> 8;          
+    num[5] = display[1] & 0x00ff;
+    num[6] = display[2] >> 8;          
+    num[7] = display[2] & 0x00ff;
+    num[8] = display[3] >> 8;          
+    num[9] = display[3] & 0x00ff;
+    num[10] = display[4] >> 8;          
+    num[11] = display[4] & 0x00ff;
+    num[12] = display[5] >> 8;          
+    num[13] = display[5] & 0x00ff;                   
+}

diff -r 000000000000 -r 17a26d8695b9 mbed.bld
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed.bld	Tue May 24 14:00:46 2016 +0000
@@ -0,0 +1,1 @@
+http://mbed.org/users/mbed_official/code/mbed/builds/7c328cabac7e
\ No newline at end of file