Please use mbed-src instead of this library.mbed-src supports GR-PEACH rev.C. mbed-srcライブラリをご利用ください。mbed-srcはGR-PEACH rev.Cに対応しています。

Fork of mbed-src_GR-PEACH_rev_c by GR-PEACH_producer_meeting

Embed: (wiki syntax)

« Back to documentation index

Show/hide line numbers SerialBase.cpp Source File

SerialBase.cpp

00001 /* mbed Microcontroller Library
00002  * Copyright (c) 2006-2013 ARM Limited
00003  *
00004  * Licensed under the Apache License, Version 2.0 (the "License");
00005  * you may not use this file except in compliance with the License.
00006  * You may obtain a copy of the License at
00007  *
00008  *     http://www.apache.org/licenses/LICENSE-2.0
00009  *
00010  * Unless required by applicable law or agreed to in writing, software
00011  * distributed under the License is distributed on an "AS IS" BASIS,
00012  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
00013  * See the License for the specific language governing permissions and
00014  * limitations under the License.
00015  */
00016 #include "SerialBase.h"
00017 #include "wait_api.h"
00018 
00019 #if DEVICE_SERIAL
00020 
00021 namespace mbed {
00022 
00023 SerialBase::SerialBase(PinName tx, PinName rx) : _serial(), _baud(9600) {
00024     serial_init(&_serial, tx, rx);
00025     serial_irq_handler(&_serial, SerialBase::_irq_handler, (uint32_t)this);
00026 }
00027 
00028 void SerialBase::baud(int baudrate) {
00029     serial_baud(&_serial, baudrate);
00030     _baud = baudrate;
00031 }
00032 
00033 void SerialBase::format(int bits, Parity parity, int stop_bits) {
00034     serial_format(&_serial, bits, (SerialParity)parity, stop_bits);
00035 }
00036 
00037 int SerialBase::readable() {
00038     return serial_readable(&_serial);
00039 }
00040 
00041 
00042 int SerialBase::writeable() {
00043     return serial_writable(&_serial);
00044 }
00045 
00046 void SerialBase::attach(void (*fptr)(void), IrqType type) {
00047     if (fptr) {
00048         _irq[type].attach(fptr);
00049         serial_irq_set(&_serial, (SerialIrq)type, 1);
00050     } else {
00051         serial_irq_set(&_serial, (SerialIrq)type, 0);
00052     }
00053 }
00054 
00055 void SerialBase::_irq_handler(uint32_t id, SerialIrq irq_type) {
00056     SerialBase *handler = (SerialBase*)id;
00057     handler->_irq[irq_type].call();
00058 }
00059 
00060 int SerialBase::_base_getc() {
00061     return serial_getc(&_serial);
00062 }
00063 
00064 int SerialBase::_base_putc(int c) {
00065     serial_putc(&_serial, c);
00066     return c;
00067 }
00068 
00069 void SerialBase::send_break() {
00070   // Wait for 1.5 frames before clearing the break condition
00071   // This will have different effects on our platforms, but should
00072   // ensure that we keep the break active for at least one frame.
00073   // We consider a full frame (1 start bit + 8 data bits bits +
00074   // 1 parity bit + 2 stop bits = 12 bits) for computation.
00075   // One bit time (in us) = 1000000/_baud
00076   // Twelve bits: 12000000/baud delay
00077   // 1.5 frames: 18000000/baud delay
00078   serial_break_set(&_serial);
00079   wait_us(18000000/_baud);
00080   serial_break_clear(&_serial);
00081 }
00082 
00083 #if DEVICE_SERIAL_FC
00084 void SerialBase::set_flow_control(Flow type, PinName flow1, PinName flow2) {
00085     FlowControl flow_type = (FlowControl)type;
00086     switch(type) {
00087         case RTS:
00088             serial_set_flow_control(&_serial, flow_type, flow1, NC);
00089             break;
00090 
00091         case CTS:
00092             serial_set_flow_control(&_serial, flow_type, NC, flow1);
00093             break;
00094 
00095         case RTSCTS:
00096         case Disabled:
00097             serial_set_flow_control(&_serial, flow_type, flow1, flow2);
00098             break;
00099 
00100         default:
00101             break;
00102     }
00103 }
00104 #endif
00105 
00106 } // namespace mbed
00107 
00108 #endif