Renesas / Mbed OS RZ_A2M_Mbed_samples

Example programs for GR-MANGO

Dependencies:   opencv-lib mbed-http

This is a collection of sample programs that work on RZ/A2M boards. You can try Mbed OS for RZ/A2M with GR-MANGO board.

Overview

Sample program files are located under the sample_programs folder. You can try each sample program by changing the following macro in sample_select.h.

#define SAMPLE_PROGRAM_NO  0

About sample_24_facedetection.cpp, this is a demonstration that can detect the face of a person without a mask. It will surround the face of a person without a mask with a red rectangle and sound alarm at the same time. To use OpenCV for face recognition, you need to prepare the followings:
・USB drive or SD card
・ Raspberry Pi Camera Module V2
・ HDMI monitor

Perform the following steps to complete face recognition sample.
1. Copy the lbpcascade_frontalface.xml to the root folder of USB drive or SD card and save it.
2. Copy the alarm.wav to the root folder of USB drive or SD card and save it.
3. Set "camera-type" value to "CAMERA_RASPBERRY_PI_832X480" in mbed_app.json

About custom boot loaders

This sample uses custom bootloader revision 5, and you can drag & drop the "xxxx_application.bin" file to write the program. Please see here for the detail.

How to write program

When using DAPLink, please use xxxx.bin as following.

1. Connect the micro USB type B terminal to the PC using a USB cable.
2. You can find the MBED directory.
3. Drag & drop xxxx.bin to the MBED directory.
4. When writing is completed, press the reset button.

When using custom bootloader, please use xxxx_application.bin as following.

1. Connect the USB type C terminal to the PC using a USB cable.
2. Hold down USB0 and press the reset button.
3. You can find the GR-MANG directory.
4. Drag & drop xxxx_application.bin to the GR-MANGO directory.

When writing is completed, press the reset button.

Attention!

For the first time only, you need to write a custom bootloader using DAPLink.

Terminal setting

If you want to confirm the serial communication the terminal soft on your PC, please specify the below values. You can change the baud rate by platform.stio-baud-rate of mbed_app.json.

Updated mbed-gr-libs library.