Renesas / Mbed OS GR-PEACH_Audio_Playback_7InchLCD_Sample

The "GR-PEACH_Audio_Playback_7InchLCD_Sample" is a sample code that can provides high-resolution audio playback of FLAC format files. It also allows the user to audio-playback control functions such as play, pause, and stop by manipulating key switches.

Dependencies:   GR-PEACH_video R_BSP TLV320_RBSP USBHost_custom

Fork of GR-PEACH_Audio_Playback_Sample by Renesas

You are viewing an older revision! See the latest version

Homepage

Table of Contents

  1. Introduction
  2. 1. Overview of the Sample Code
  3. 1.1 Software Block Diagram
  4. 1.2 Pin Definitions
  5. 2. Sample Code Operating Environment
  6. 2.1 Operating Environment
  7. 2.2 List of User Operations
  8. 3. Function Outline
  9. 3.1 Playback Control
  10. 3.2 Trick Play Control
  11. 3.3 Acquisition of the Song Information
  12. 3.4 How the Folder Structure is Analyzed
  13. 4.Others

Note

For a sample program of without LCD Board, please refer to GR-PEACH_Audio_Playback_Sample.

Introduction

The "GR-PEACH_Audio_Playback_7InchLCD_Sample" is a sample code that can provides high-resolution audio playback of FLAC format files. It also allows the user to audio-playback control functions such as play, pause, and stop by manipulating key switches.

1. Overview of the Sample Code

1.1 Software Block Diagram

Figure 1.1 shows the software block diagram.

/media/uploads/1050186/lcd_figure1_1.png

1.2 Pin Definitions

Table 1.1 shows the pins that this sample code are to use.

/media/uploads/1050186/lcd_table1_1.png

2. Sample Code Operating Environment

This sample code runs in GR-PEACH + the Audio/Camera shield for the GR-PEACH + LCD Board environment. This section explains the functions of the ports that are used by this sample code.

2.1 Operating Environment

Figure 2.1 shows the configuration of the operating environment for running this sample code.

/media/uploads/1050186/lcd_figure2_1.png /media/uploads/1050186/lcd_figure2_2.png /media/uploads/1050186/lcd_figure2_3.png /media/uploads/1050186/lcd_table2_1.png

2.2 List of User Operations

A list of user operations on the command line, TFT touch keys, and switch key that the user can perform for this sample code is shown in. Table 2.2.

/media/uploads/1050186/lcd_table2_2.png

3. Function Outline

The functions of this sample code are summarized in Table 3.1 to Table 3.3.

/media/uploads/1050186/lcd_table3_1.png /media/uploads/1050186/lcd_table3_2.png /media/uploads/1050186/lcd_table3_3.png /media/uploads/1050186/lcd_figure3_1.png

3.1 Playback Control

The playback control that the sample code supports include play, pause, stop, skip to next, and skip to previous.

3.2 Trick Play Control

Manipulating "Repeat" alternates between "Repeat mode On" and "Repeat mode Off". The default mode is "Repeat mode On". When the repeat mode is on, the playback of the first song starts after the playback of the last song is finished. When the repeat mode is off, the sample code enters the stopped state after the playback of the last song is finished.

3.3 Acquisition of the Song Information

The information of the song being played is obtained by operating the "Play info" during the playback of the song. Table 3.4 lists the items of information that can be obtained by the "Play info" operation.

/media/uploads/dkato/audioplayback_table3_4.png

3.4 How the Folder Structure is Analyzed

The sample coded analyzes the folder structure in the breadth-first search order. The order in which files are numbered is illustrated in Table 3.5. The sample code does not sort the files by file or folder name.

/media/uploads/dkato/audioplayback_table3_5.png

4.Others

The default setting of serial communication (baud rate etc.) in mbed is shown the following link.
Please refer to the link and change the settings of your PC terminal software.
The default value of baud rate in mbed is 9600.
https://developer.mbed.org/teams/Renesas/wiki/GR-PEACH-Getting-Started#install-the-usb-serial-communication

All wikipages