Productize / PCT2075

Driver for the NXP PCT2075 digital temperature sensor and thermal watchdog

NXP PCT2075 temperature sensor driver for mbed

This library is a driver for the [NXP PCT2075](http://www.nxp.com/products/sensors/i2c-temperature-voltage-monitors/ic-bus-fm-plus-1-degree-c-accuracy-digital-temperature-sensor-and-thermal-watchdog:PCT2075). It only handles the I2C communication with the sensor, it does not handle the OS interrupt line. The [mbed InterruptIn](https://developer.mbed.org/handbook/InterruptIn) library can be used for this.

example usage

#include <mbed.h>
#include <PCT2075.h>
 
Serial s(USBTX, USBRX); // tx, rx
 
InterruptIn TempPinInt(PC4);
LowPowerTicker ticker;
 
static volatile bool temp_int = false;
static volatile bool tick_int = false;
 
int main( void )
{
    TempPinInt.mode(PullUp);
 
    PCT2075::Configuration config = {
        PCT2075::OS_FAULT_QUE_1,
        PCT2075::OS_ACTIVE_LOW,
        PCT2075::OS_MODE_INTERRUPT,
        PCT2075::DEVICE_MODE_SHUTDOWN
    };
    temp_sensor.set_configuration(config);
    temp_sensor.set_idle_time(PCT2075::TIDLE_MAX);
    
    temp_sensor.set_hyst_temperature(2000);
    temp_sensor.set_os_temperature(2500);
    
    TempPinInt.fall(&on_fall);
    ticker.attach(&tick, 2.0);
 
    while(true) {
        sleep(); // wait to be woken up by ticker or temp sensor
 
        if (tick_int) {
            s.printf("Tick\r\n");
            config.device_mode = PCT2075::DEVICE_MODE_NORMAL;
            temp_sensor.set_configuration(config);
            tick_int = false;
        }
 
        if (temp_int) {
            config.device_mode = PCT2075::DEVICE_MODE_SHUTDOWN;
            temp_sensor.set_configuration(config);
            uint16_t t = temp_sensor.read_temperature();
            s.printf("Temperature: %d\r\n", t);
            temp_int = false;
        }
    }
}

LICENSE.txt

Committer:
seppestas
Date:
2016-09-23
Revision:
0:396665cc3ea0

File content as of revision 0:396665cc3ea0:

Copyright (c) 2016 Productize

Permission is hereby granted, free of charge, to any person obtaining a
copy of this software and associated documentation files (the "Software"),
to deal in the Software without restriction, including without limitation
the rights to use, copy, modify, merge, publish, distribute, sublicense,
and/or sell copies of the Software, and to permit persons to whom the
Software is furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in
all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
DEALINGS IN THE SOFTWARE.