![](/media/cache/group/image001.png.50x50_q85.png)
passe en DFU si un core reset est envoyé (pour l'instant, par STLINK)
Revision 0:5ed2a30b9e68, committed 2018-05-23
- Comitter:
- potless
- Date:
- Wed May 23 23:01:17 2018 +0000
- Commit message:
- lire le nota en d?but de code.;
Changed in this revision
main.cpp | Show annotated file Show diff for this revision Revisions of this file |
mbed-os.lib | Show annotated file Show diff for this revision Revisions of this file |
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/main.cpp Wed May 23 23:01:17 2018 +0000 @@ -0,0 +1,104 @@ +#include "mbed.h" + +// mode d'emploi : +// le STM passe en DFU après l'execution de ce code + un core reset envoyé depuis STLINK-utility +// Comme ce core reset passe par le port SW, pour l'instant ça ne sert à rien +// objectif 1 : trouver le moyen d'envoyer ce core reset par voie logicielle +// objectif 2 : regarder si on peut charger un code en dfu par l'USB +// objectif 3 : faire cohabiter l'USBserial et le DFU sur les mêmes pins + + +int main() { + + //RESET INTO DFU MODE - NOTE THIS WILL STOP RUNNING YOUR FIRMWARE + //Don't do this unless you are comfortable flashing over USB / DFU + //and maybe have a programmer shield / st-link programmer + + + +void (*SysMemBootJump)(void); + +/** +* Step: Set system memory address. +* +* For STM32F446, system memory is on 0x1FFF 0000 +* For other families, check AN2606 document table 110 with descriptions of memory addresses +*/ +volatile uint32_t addr = 0x1FFF0000; + +/** +* Step: Disable RCC, set it to default (after reset) settings +* Internal clock, no PLL, etc. +*/ +HAL_RCC_DeInit(); +__HAL_RCC_SYSCFG_CLK_ENABLE(); +/** +* Step: Disable systick timer and reset it to default values +*/ +SysTick->CTRL = 0; +SysTick->LOAD = 0; +SysTick->VAL = 0; + + +/** +* Step: Disable all interrupts +*/ +__disable_irq(); + +__DSB(); + +/** +* Step: Remap system memory to address 0x0000 0000 in address space +* For each family registers may be different. +* Check reference manual for each family. +* +* For STM32F4xx, MEMRMP register in SYSCFG is used (bits[1:0]) +* For STM32F0xx, CFGR1 register in SYSCFG is used (bits[1:0]) +* For others, check family reference manual +*/ +//SYSCFG->MEMRMP = 1; + +__HAL_SYSCFG_REMAPMEMORY_SYSTEMFLASH(); //Call HAL macro to do this for you + + +/** +* Step: Set jump memory location for system memory +* Use address with 4 bytes offset which specifies jump location where program starts +*/ + + +/* Remap is not visible at once. Execute some unrelated command! */ +__DSB(); +__ISB(); + + + + +SysMemBootJump = (void (*)(void)) (*((uint32_t *)(addr + 4))); + + +/** +* Step: Set main stack pointer. +* This step must be done last otherwise local variables in this function +* don't have proper value since stack pointer is located on different position +* +* Set direct address location which specifies stack pointer in SRAM location +*/ +__set_MSP(*(uint32_t *)addr); + +/** +* Step: Actually call our function to jump to set location +* This will start system memory execution +*/ + +SysMemBootJump(); + +/** +* Step: Connect USB<->UART converter to dedicated USART pins and test +* and test with bootloader works with STM32 Flash Loader Demonstrator software +*/ + + + +} +
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/mbed-os.lib Wed May 23 23:01:17 2018 +0000 @@ -0,0 +1,1 @@ +https://github.com/ARMmbed/mbed-os/#a6e27b1b866e7301adcc81f94ea85e0ee7fc63de