NXP
The MCR20A Connectivity Test application is an SMAC based demo application which provides the user with means to test basic transmission-reception functionalities along with several advanced testing features based on the ASP and SMAC APIs.
Dependencies: fsl_phy_mcr20a fsl_smac mbed-rtos mbed
Fork of
mcr20_connectivity_test
by 
Freescale
Modes of Operation
The MCR20A Connectivity Test application has five main features:
Continuous Tests
This menu option displays several test suites
- IDLE: This option sets the transceiver and all the state machines to idle.
- Burst PRBS Transmission using packet mode: This option continuously sends packets which contain a pseudo-random payload of fixed length.
- Continuous Modulated Transmission: This option allows the user to select between modulating 1’s, 0’s, or a pseudo-random sequence (PN) and sending them OTA continuously (in continuous mode).
- Continuous Unmodulated Transmission: This option allows the user to send an unmodulated signal OTA having the frequency equal to the central frequency of the currently selected channel.
- Continuous Reception: This test places the transceiver in reception and dumps the payload bytes of the received packets to the TERM in ASCII-converted hexadecimal characters.
- Continuous Energy Detect: This option launches consecutive energy detect requests at fixed hard-coded intervals for the current channel, and prints their values to the TERM.
- Continuous Scan: This option is similar to the previous one, except that at each iteration it obtains the energy values on all channels.
- Continuous CCA: This option launches consecutive CCA requests for the currently selected channel at a fixed. hard-coded interval, and prints “Idle” or “Busy” depending on the CCA result.
Packet Error Rate
This menu option displays a configuration menu for testing the packet error rate. The menu displayed also depends on the ‘r’ or ‘t’ shortcut key. If ‘r’ is pressed, the following menu is for PER RX, otherwise it is for PER TX. For example, if two MCR20A platforms have Connectivity Test loaded, one of the boards can be set in RX and the other in TX as in the following figures.
Range Test
This test displays a configuration menu that performs a ‘ping-pong’ test to aid the user in determining the range (as distance between two platforms) in which the MCR20A platform can function properly. The sub-menu also depends on the ‘r’ and ‘t’ shortcuts so that one of the platforms can be the initializer (first to start a TX) and the other can respond to requests. The test is started and stopped only by user intervention and during its execution it will display the signal strength for each received packet. At the end of the test, the platform configured as the initializer (TX) displays a summary of how many packets were lost and what was the average RSSI.
Radio Registers Edit
This menu allows the user to read-write transceiver registers and to dump all address-value pairs from the transceiver registers to the TERM. The described features are accessible through the entries of this menu. For each access request (read or write) to a certain register, the register address is validated partially, and it is the responsibility of the user to access an existing register. For example, if the last accessible register is at 0xFD, the application only validates that the address is in the unsigned char range, but the user has the possibility to request register 0xFF. To ensure that a proper range is used, the user should first use the dump register feature to see the valid address ranges.
Carrier Sense and Transmission Control
This menu allows the user to choose between two tests. The former is the Carrier Sense test, which performs ED continuously until the ED value is above the CCA threshold (configured using ‘k’ and ‘l’ shortcuts) and then transmits a packet which contains pseudo-random data with the payload size configured using ‘n’ and ‘m’ shortcuts. The latter is the Transmission Control test, which displays a selection menu for number of packets identical with the one in PER TX test, then prompts the user to enter a decimal value resembling the inter-packet delay in milliseconds. After that, the application starts sending the selected number of packets with the selected inter-packet delay, using pseudo-random data for the payload with the size configured with ‘n’ and ‘m’ shortcuts.
Keys Usage
The following keys have the effect described below:
- ‘t’ : Brings up the configuration menu for the transmitter in both PER and Range tests.
- ‘r’ : Brings up the configuration menu for the receiver in both PER and Range tests.
- ‘q’ : Increments channel number. If pressed when the current channel is 26, the channel number changes to 11.
- ‘w’ : Decrements channel number. If pressed when the current channel is 11, the channel number will change to 26.
- ‘a’ : Increments output power value. If output power is at maximum and this key is pressed, the output power goes to the minimum (in this case 0x03).
- ‘s’ : Decrements output power value. If output power is at minimum and this key is pressed, the output power goes to the maximum (in this case 0x1F). These are not directly mapped to dBm values. Instead the output power value is written to the appropriate register. The user should consult the reference manual to determine the relationship between selected value and power in dBm.
- ‘n’ : Increments the length of the payload. This value is used in both PER TX test to build-up the payload and in Transmission Control test for the same reason.
- ‘m’ : Decrements the length of the payload. Incrementation and decrementation are performed in the [17, 116] interval. All overflows at one end lead to setting the other end’s value.
- ‘k’ : Increments the CCA threshold for the Carrier Sense test. In this test the CCA before TX algorithm is implemented at application level, and the channel idle threshold is established using this parameter.
- ‘l’ : Decrements the CCA threshold for the Carrier Sense test.
Documentation
SMAC Demo Applications User Guide
Revision 7:34047de4992b, committed 2015-08-18
- Comitter:
- andreikovacs
- Date:
- Tue Aug 18 12:52:15 2015 +0000
- Parent:
- 6:85e288fb2556
- Commit message:
- Included fsl_phy_mcr20a and fsl_smac libraries
Changed in this revision
--- a/FSL_CONN_FWK/Common/EmbeddedTypes.h Fri Jul 31 13:49:46 2015 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,106 +0,0 @@ -/*! -* Copyright (c) 2015, Freescale Semiconductor, Inc. -* All rights reserved. -* -* \file EmbeddedTypes.h -* This file holds type definitions that maps the standard c-types into types -* with guaranteed sizes. The types are target/platform specific and must be edited -* for each new target/platform. -* The header file also provides definitions for TRUE, FALSE and NULL. -* -* Redistribution and use in source and binary forms, with or without modification, -* are permitted provided that the following conditions are met: -* -* o Redistributions of source code must retain the above copyright notice, this list -* of conditions and the following disclaimer. -* -* o Redistributions in binary form must reproduce the above copyright notice, this -* list of conditions and the following disclaimer in the documentation and/or -* other materials provided with the distribution. -* -* o Neither the name of Freescale Semiconductor, Inc. nor the names of its -* contributors may be used to endorse or promote products derived from this -* software without specific prior written permission. -* -* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR -* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -*/ - -#ifndef _EMBEDDEDTYPES_H_ -#define _EMBEDDEDTYPES_H_ - - -/************************************************************************************ -* -* INCLUDES -* -************************************************************************************/ - -#include <stdint.h> -#include <stdlib.h> -#include <string.h> - -#ifdef __ICCARM__ -#include <intrinsics.h> -#endif - -/************************************************************************************ -* -* TYPE DEFINITIONS -* -************************************************************************************/ - -/* boolean types */ -typedef uint8_t bool_t; - -typedef uint8_t index_t; - -/* TRUE/FALSE definition*/ -#ifndef TRUE -#define TRUE 1 -#endif - -#ifndef FALSE -#define FALSE 0 -#endif - -/* null pointer definition*/ -#ifndef NULL -#define NULL (( void * )( 0x0UL )) -#endif - -#if defined(__GNUC__) -#define PACKED_STRUCT struct __attribute__ ((__packed__)) -#define PACKED_UNION union __attribute__ ((__packed__)) -#elif defined(__IAR_SYSTEMS_ICC__) -#define PACKED_STRUCT __packed struct -#define PACKED_UNION __packed union -#else -#define PACKED_STRUCT struct -#define PACKED_UNION union -#endif - -typedef unsigned char uint8_t; -//typedef unsigned long uint32_t; - -#define MIN(a,b) (((a) < (b))?(a):(b)) - -/* Compute the number of elements of an array */ -#define NumberOfElements(x) (sizeof(x)/sizeof((x)[0])) - -#define GetRelAddr(strct, member) ((uint32_t)&(((strct*)(void *)0)->member)) -#define GetSizeOfMember(strct, member) sizeof(((strct*)(void *)0)->member) - -/* Type definitions for link configuration of instantiable layers */ -#define gInvalidInstanceId_c (instanceId_t)(-1) -typedef uint32_t instanceId_t; - -#endif /* _EMBEDDEDTYPES_H_ */
--- a/FSL_CONN_FWK/MemManager/Interface/MemManager.h Fri Jul 31 13:49:46 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,198 +0,0 @@
-/*!
-* Copyright (c) 2015, Freescale Semiconductor, Inc.
-* All rights reserved.
-*
-* \file MemManager.h
-* This is the header file for the Memory Manager interface.
-*
-* Redistribution and use in source and binary forms, with or without modification,
-* are permitted provided that the following conditions are met:
-*
-* o Redistributions of source code must retain the above copyright notice, this list
-* of conditions and the following disclaimer.
-*
-* o Redistributions in binary form must reproduce the above copyright notice, this
-* list of conditions and the following disclaimer in the documentation and/or
-* other materials provided with the distribution.
-*
-* o Neither the name of Freescale Semiconductor, Inc. nor the names of its
-* contributors may be used to endorse or promote products derived from this
-* software without specific prior written permission.
-*
-* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
-* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
-* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-*/
-
-#ifndef _MEM_MANAGER_H_
-#define _MEM_MANAGER_H_
-
-/*! *********************************************************************************
-*************************************************************************************
-* Include
-*************************************************************************************
-********************************************************************************** */
-#include "EmbeddedTypes.h"
-#include "GenericList.h"
-#include "MemManagerConfig.h"
-
-
-/*! *********************************************************************************
-*************************************************************************************
-* Public macros
-*************************************************************************************
-********************************************************************************** */
-/*Defines pools by block size and number of blocks. Must be alligned to 4 bytes.*/
-#ifndef PoolsDetails_c
-#define PoolsDetails_c \
- _block_size_ 64 _number_of_blocks_ 8 _eol_ \
- _block_size_ 128 _number_of_blocks_ 2 _eol_ \
- _block_size_ 256 _number_of_blocks_ 6 _eol_
-#endif
-
-
-/*! *********************************************************************************
-*************************************************************************************
-* Private type definitions
-*************************************************************************************
-********************************************************************************** */
-/*Defines statuses used in MEM_BufferAlloc and MEM_BufferFree*/
-typedef enum
-{
- MEM_SUCCESS_c = 0, /* No error occurred */
- MEM_INIT_ERROR_c, /* Memory initialization error */
- MEM_ALLOC_ERROR_c, /* Memory allocation error */
- MEM_FREE_ERROR_c, /* Memory free error */
- MEM_UNKNOWN_ERROR_c /* something bad has happened... */
-}memStatus_t;
-
-
-/*! *********************************************************************************
-*************************************************************************************
-* Public prototypes
-*************************************************************************************
-********************************************************************************** */
-#ifdef __cplusplus
-extern "C" {
-#endif
-/*Initialises the Memory Manager.*/
-memStatus_t MEM_Init(void);
-/*Returns the number of available blocks that fit the given size.*/
-uint32_t MEM_GetAvailableBlocks(uint32_t size);
-/*Frees the givem buffer.*/
-memStatus_t MEM_BufferFree(void* buffer);
-/*Returns the allocated buffer of the given size.*/
-void* MEM_BufferAlloc(uint32_t numBytes);
-/*Returns the size of a given buffer*/
-uint16_t MEM_BufferGetSize(void* buffer);
-/*Performs a write-read-verify test accross all pools*/
-uint32_t MEM_WriteReadTest(void);
-#ifdef __cplusplus
-}//extern "C"
-#endif
-
-/*! *********************************************************************************
-*************************************************************************************
-* Private macros
-*************************************************************************************
-********************************************************************************** */
-#if defined(MEM_TRACKING) && defined(DEBUG_ASSERT)
-#define MEM_ASSERT(condition) if(!(condition))while(1);
-#else
-#define MEM_ASSERT(condition) (void)(condition);
-#endif
-
-
-/*! *********************************************************************************
-*************************************************************************************
-* Private type definitions
-*************************************************************************************
-********************************************************************************** */
-
-#ifdef MEM_STATISTICS
-/*Statistics structure definition. Used by pools.*/
-typedef struct poolStat_tag
- {
- uint16_t numBlocks;
- uint16_t allocatedBlocks;
- uint16_t allocatedBlocksPeak;
- uint16_t allocationFailures;
- uint16_t freeFailures;
-#ifdef MEM_TRACKING
- uint16_t poolFragmentWaste;
- uint16_t poolFragmentWastePeak;
-#endif /*MEM_TRACKING*/
- } poolStat_t;
-#endif /*MEM_STATISTICS*/
-
-#ifdef MEM_TRACKING
-/*Definition for alloc indicators. Used in buffer tracking.*/
-typedef enum
-{
- MEM_TRACKING_FREE_c = 0,
- MEM_TRACKING_ALLOC_c,
-}memTrackingStatus_t;
-
-/*Tracking structure definition.*/
-typedef struct BlockTracking_tag
-{
- void *blockAddr; /*Addr of Msg, not that this pointer is
- 4 byte bigger than the addr in the pool
- has the header of the msg is 4 bytes */
- uint16_t blockSize; /*Size of block in bytes.*/
- uint16_t fragmentWaste; /*Size requested by allocator.*/
- void *allocAddr; /*Return address of last Alloc made */
- void *freeAddr; /*Return address of last Free made */
- uint16_t allocCounter; /*No of time this msg has been allocated */
- uint16_t freeCounter; /*No of time this msg has been freed */
- memTrackingStatus_t allocStatus; /*1 if currently allocated, 0 if currently free */
- // uint8_t padding;
-}blockTracking_t;
-#endif /*MEM_TRACKING*/
-
-/*Header description for buffers.*/
-typedef struct listHeader_tag
-{
- listElement_t link;
- struct pools_tag *pParentPool;
-}listHeader_t;
-
-/*Buffer pools. Used by most functions*/
-typedef struct pools_tag
-{
- list_t anchor; /* MUST be first element in pools_t struct */
- uint16_t nextBlockSize;
- uint16_t blockSize;
-#ifdef MEM_STATISTICS
- poolStat_t poolStatistics;
- uint8_t padding[2];
-#endif /*MEM_STATISTICS*/
-}pools_t;
-
-/*Buffer pool description. Used by MM_Init() for creating the buffer pools. */
-typedef struct poolInfo_tag
-{
- uint16_t blockSize;
- uint16_t poolSize;
- /* uint8_t padding[2]; */
-}poolInfo_t;
-
-/*! *********************************************************************************
-*************************************************************************************
-* Private prototypes
-*************************************************************************************
-********************************************************************************** */
-
-#ifdef MEM_TRACKING
-uint8_t MEM_Track(listHeader_t *block, memTrackingStatus_t alloc, uint32_t address, uint16_t requestedSize);
-uint8_t MEM_BufferCheck(uint8_t *p, uint32_t size);
-#endif /*MEM_TRACKING*/
-
-#endif /* _MEM_MANAGER_H_ */
--- a/FSL_CONN_FWK/MemManager/Interface/MemManagerConfig.h Fri Jul 31 13:49:46 2015 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,49 +0,0 @@ -/*! -* Copyright (c) 2015, Freescale Semiconductor, Inc. -* All rights reserved. -* -* \file MemManagerConfig.h -* -* Redistribution and use in source and binary forms, with or without modification, -* are permitted provided that the following conditions are met: -* -* o Redistributions of source code must retain the above copyright notice, this list -* of conditions and the following disclaimer. -* -* o Redistributions in binary form must reproduce the above copyright notice, this -* list of conditions and the following disclaimer in the documentation and/or -* other materials provided with the distribution. -* -* o Neither the name of Freescale Semiconductor, Inc. nor the names of its -* contributors may be used to endorse or promote products derived from this -* software without specific prior written permission. -* -* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR -* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -*/ - - -#ifndef _MEM_MANAGER_CONFIG_H_ -#define _MEM_MANAGER_CONFIG_H_ - -/*Defines pools by block size and number of blocks. Must be aligned to 4 bytes.*/ -#ifndef PoolsDetails_c -#define PoolsDetails_c \ - _block_size_ 64 _number_of_blocks_ 8 _eol_ \ - _block_size_ 128 _number_of_blocks_ 2 _eol_ \ - _block_size_ 256 _number_of_blocks_ 10 _eol_ -#endif - -/*Enables debug features: tracking and statistics.*/ -/*Tracking disabled*/ -/*Statistics disabled*/ - -#endif /* _MEM_MANAGER_CONFIG_H_ */
--- a/FSL_CONN_FWK/MemManager/Source/MemManager.c Fri Jul 31 13:49:46 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,620 +0,0 @@
-/*!
-* Copyright (c) 2015, Freescale Semiconductor, Inc.
-* All rights reserved.
-*
-* \file MemManager.c
-* This is the source file for the Memory Manager.
-*
-* Redistribution and use in source and binary forms, with or without modification,
-* are permitted provided that the following conditions are met:
-*
-* o Redistributions of source code must retain the above copyright notice, this list
-* of conditions and the following disclaimer.
-*
-* o Redistributions in binary form must reproduce the above copyright notice, this
-* list of conditions and the following disclaimer in the documentation and/or
-* other materials provided with the distribution.
-*
-* o Neither the name of Freescale Semiconductor, Inc. nor the names of its
-* contributors may be used to endorse or promote products derived from this
-* software without specific prior written permission.
-*
-* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
-* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
-* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-*/
-
-
-/*! *********************************************************************************
-*************************************************************************************
-* Include
-*************************************************************************************
-********************************************************************************** */
-#include "EmbeddedTypes.h"
-#include "mbedAbstraction.h"
-#include "fsl_os_abstraction.h"
-#ifdef MEM_DEBUG
-#include "Panic.h"
-#endif
-#include "MemManager.h"
-
-
-/*! *********************************************************************************
-*************************************************************************************
-* Private memory declarations
-*************************************************************************************
-********************************************************************************** */
-
-#define _block_size_ {
-#define _number_of_blocks_ ,
-#define _eol_ },
-
-poolInfo_t poolInfo[] =
-{
- PoolsDetails_c
- {0, 0} /*termination tag*/
-};
-
-#undef _block_size_
-#undef _number_of_blocks_
-#undef _eol_
-
-#define _block_size_ (sizeof(listHeader_t)+
-#define _number_of_blocks_ ) *
-#define _eol_ +
-
-#define heapSize_c (PoolsDetails_c 0)
-
-// Heap
-uint8_t memHeap[heapSize_c];
-const uint32_t heapSize = heapSize_c;
-
-#undef _block_size_
-#undef _number_of_blocks_
-#undef _eol_
-
-#define _block_size_ 0 *
-#define _number_of_blocks_ + 0 *
-#define _eol_ + 1 +
-
-#define poolCount (PoolsDetails_c 0)
-
-// Memory pool info and anchors.
-pools_t memPools[poolCount];
-
-#undef _block_size_
-#undef _number_of_blocks_
-#undef _eol_
-
-#ifdef MEM_TRACKING
-
-#define _block_size_ 0*
-#define _number_of_blocks_ +
-#define _eol_ +
-
-#define mTotalNoOfMsgs_d (PoolsDetails_c 0)
-static const uint16_t mTotalNoOfMsgs_c = mTotalNoOfMsgs_d;
-blockTracking_t memTrack[mTotalNoOfMsgs_d];
-
-#undef _block_size_
-#undef _number_of_blocks_
-#undef _eol_
-
-#endif /*MEM_TRACKING*/
-
-// Free messages counter. Not used by module.
-uint16_t gFreeMessagesCount;
-
-/*! *********************************************************************************
-*************************************************************************************
-* Public functions
-*************************************************************************************
-********************************************************************************** */
-
-/*! *********************************************************************************
-* \brief This function initializes the message module private variables.
-* Must be called at boot time, or if device is reset.
-*
-* \param[in] none
-*
-* \return MEM_SUCCESS_c if initialization is successful. (It's always successful).
-*
-********************************************************************************** */
-memStatus_t MEM_Init()
-{
- poolInfo_t *pPoolInfo = poolInfo; // IN: Memory layout information
- pools_t *pPools = memPools;// OUT: Will be initialized with requested memory pools.
- uint8_t *pHeap = memHeap;// IN: Memory heap.
- uint8_t poolN;
-#ifdef MEM_TRACKING
- uint16_t memTrackIndex = 0;
-#endif /*MEM_TRACKING*/
-
- gFreeMessagesCount = 0;
-
- for(;;)
- {
- poolN = pPoolInfo->poolSize;
- ListInit((listHandle_t)&pPools->anchor, poolN);
-#ifdef MEM_STATISTICS
- pPools->poolStatistics.numBlocks = 0;
- pPools->poolStatistics.allocatedBlocks = 0;
- pPools->poolStatistics.allocatedBlocksPeak = 0;
- pPools->poolStatistics.allocationFailures = 0;
- pPools->poolStatistics.freeFailures = 0;
-#ifdef MEM_TRACKING
- pPools->poolStatistics.poolFragmentWaste = 0;
- pPools->poolStatistics.poolFragmentWastePeak = 0;
-#endif /*MEM_TRACKING*/
-#endif /*MEM_STATISTICS*/
-
- while(poolN)
- {
- // Add block to list of free memory.
- ListAddTail((listHandle_t)&pPools->anchor, (listElementHandle_t)&((listHeader_t *)pHeap)->link);
- ((listHeader_t *)pHeap)->pParentPool = pPools;
-#ifdef MEM_STATISTICS
- pPools->poolStatistics.numBlocks++;
-#endif /*MEM_STATISTICS*/
-
- gFreeMessagesCount++;
-#ifdef MEM_TRACKING
- memTrack[memTrackIndex].blockAddr = (void *)(pHeap + sizeof(listHeader_t));
- memTrack[memTrackIndex].blockSize = pPoolInfo->blockSize;
- memTrack[memTrackIndex].fragmentWaste = 0;
- memTrack[memTrackIndex].allocAddr = NULL;
- memTrack[memTrackIndex].allocCounter = 0;
- memTrack[memTrackIndex].allocStatus = MEM_TRACKING_FREE_c;
- memTrack[memTrackIndex].freeAddr = NULL;
- memTrack[memTrackIndex].freeCounter = 0;
- memTrackIndex++;
-#endif /*MEM_TRACKING*/
-
- // Add block size (without list header)
- pHeap += pPoolInfo->blockSize + sizeof(listHeader_t);
- poolN--;
- }
-
- pPools->blockSize = pPoolInfo->blockSize;
- pPools->nextBlockSize = (pPoolInfo+1)->blockSize;
- if(pPools->nextBlockSize == 0)
- {
- break;
- }
-
- pPools++;
- pPoolInfo++;
- }
- return MEM_SUCCESS_c;
-}
-
-/*! *********************************************************************************
-* \brief This function returns the number of available blocks greater or
-* equal to the given size.
-*
-* \param[in] size - Size of blocks to check for availability.
-*
-* \return Number of available blocks greater or equal to the given size.
-*
-* \pre Memory manager must be previously initialized.
-*
-********************************************************************************** */
-uint32_t MEM_GetAvailableBlocks
- (
- uint32_t size
- )
-{
- pools_t *pPools = memPools;
- uint32_t pTotalCount = 0;
-
- for(;;)
- {
- if(size <= pPools->blockSize)
- {
- pTotalCount += ListGetSize((listHandle_t)&pPools->anchor);
- }
-
- if(pPools->nextBlockSize == 0)
- {
- break;
- }
-
- pPools++;
- }
-
- return pTotalCount;
-}
-
-/*! *********************************************************************************
-* \brief Allocate a block from the memory pools. The function uses the
-* numBytes argument to look up a pool with adequate block sizes.
-* \param[in] numBytes - Size of buffer to allocate.
-*
-* \return Pointer to the allocated buffer, NULL if failed.
-*
-* \pre Memory manager must be previously initialized.
-*
-********************************************************************************** */
-void* MEM_BufferAlloc
- (
- uint32_t numBytes // IN: Minimum number of bytes to allocate
- )
-{
-#ifdef MEM_TRACKING
-
- /* Save the Link Register */
- volatile uint32_t savedLR;
-// __asm("str r14, [SP]");
- __asm("push {r2} ");
- __asm("push {LR} ");
- __asm("pop {r2} ");
- __asm("str r2, [SP, #4]");
- __asm("pop {r2}");
-
-#endif /*MEM_TRACKING*/
-
- pools_t *pPools = memPools;
- listHeader_t *pBlock;
-
-#ifdef MEM_TRACKING
- uint16_t requestedSize = numBytes;
-#endif /*MEM_TRACKING*/
-
- OSA_EnterCritical(kCriticalDisableInt);
-
- while(numBytes)
- {
- if(numBytes <= pPools->blockSize)
- {
- pBlock = (listHeader_t *)ListRemoveHead((listHandle_t)&pPools->anchor);
-
- if(NULL != pBlock)
- {
- pBlock++;
- gFreeMessagesCount--;
-
-#ifdef MEM_STATISTICS
- pPools->poolStatistics.allocatedBlocks++;
- if ( pPools->poolStatistics.allocatedBlocks > pPools->poolStatistics.allocatedBlocksPeak )
- {
- pPools->poolStatistics.allocatedBlocksPeak = pPools->poolStatistics.allocatedBlocks;
- }
- MEM_ASSERT(pPools->poolStatistics.allocatedBlocks <= pPools->poolStatistics.numBlocks);
-#endif /*MEM_STATISTICS*/
-
-#ifdef MEM_TRACKING
- MEM_Track(pBlock, MEM_TRACKING_ALLOC_c, savedLR, requestedSize);
-#endif /*MEM_TRACKING*/
- OSA_ExitCritical(kCriticalDisableInt);
- return pBlock;
- }
- else
- {
- if(numBytes > pPools->nextBlockSize) break;
- // No more blocks of that size, try next size.
- numBytes = pPools->nextBlockSize;
- }
- }
- // Try next pool
- if(pPools->nextBlockSize)
- pPools++;
- else
- break;
- }
-#ifdef MEM_STATISTICS
- pPools->poolStatistics.allocationFailures++;
-#endif /*MEM_STATISTICS*/
-
-#ifdef MEM_DEBUG
- panic( 0, (uint32_t)MEM_BufferAlloc, 0, 0);
-#endif
-
- OSA_ExitCritical(kCriticalDisableInt);
- return NULL;
-}
-
-/*! *********************************************************************************
-* \brief Deallocate a memory block by putting it in the corresponding pool
-* of free blocks.
-*
-* \param[in] buffer - Pointer to buffer to deallocate.
-*
-* \return MEM_SUCCESS_c if deallocation was successful, MEM_FREE_ERROR_c if not.
-*
-* \pre Memory manager must be previously initialized.
-*
-* \remarks Never deallocate the same buffer twice.
-*
-********************************************************************************** */
-memStatus_t MEM_BufferFree
- (
- void* buffer // IN: Block of memory to free
- )
-{
-#ifdef MEM_TRACKING
-
- /* Save the Link Register */
- volatile uint32_t savedLR;
-// __asm("str r14, [SP]");
- __asm("push {r1} ");
- __asm("push {LR} ");
- __asm("pop {r1} ");
- __asm("str r1, [SP, #4]");
- __asm("pop {r1}");
-#endif /*MEM_TRACKING*/
-
- if(buffer == NULL)
- {
- return MEM_FREE_ERROR_c;
- }
-
- OSA_EnterCritical(kCriticalDisableInt);
-
- listHeader_t *pHeader = (listHeader_t *)buffer-1;
- pools_t *pParentPool = (pools_t *)pHeader->pParentPool;
-
- pools_t *pool = memPools;
- for(;;)
- {
- if (pParentPool == pool)
- break;
- if(pool->nextBlockSize == 0)
- {
- /* The parent pool was not found! This means that the memory buffer is corrupt or
- that the MEM_BufferFree() function was called with an invalid parameter */
-#ifdef MEM_STATISTICS
- pParentPool->poolStatistics.freeFailures++;
-#endif /*MEM_STATISTICS*/
- OSA_ExitCritical(kCriticalDisableInt);
- return MEM_FREE_ERROR_c;
- }
- pool++;
- }
-
- if( pHeader->link.list != NULL )
- {
- /* The memory buffer appears to be enqueued in a linked list.
- This list may be the free memory buffers pool, or another list. */
-#ifdef MEM_STATISTICS
- pParentPool->poolStatistics.freeFailures++;
-#endif /*MEM_STATISTICS*/
- OSA_ExitCritical(kCriticalDisableInt);
- return MEM_FREE_ERROR_c;
- }
-
- gFreeMessagesCount++;
-
- ListAddTail((listHandle_t)&pParentPool->anchor, (listElementHandle_t)&pHeader->link);
-
-#ifdef MEM_STATISTICS
- MEM_ASSERT(pParentPool->poolStatistics.allocatedBlocks > 0);
- pParentPool->poolStatistics.allocatedBlocks--;
-#endif /*MEM_STATISTICS*/
-
-#ifdef MEM_TRACKING
- MEM_Track(buffer, MEM_TRACKING_FREE_c, savedLR, 0);
-#endif /*MEM_TRACKING*/
- OSA_ExitCritical(kCriticalDisableInt);
- return MEM_SUCCESS_c;
-}
-
-/*! *********************************************************************************
-* \brief Determines the size of a memory block
-*
-* \param[in] buffer - Pointer to buffer.
-*
-* \return size of memory block
-*
-* \pre Memory manager must be previously initialized.
-*
-********************************************************************************** */
-uint16_t MEM_BufferGetSize
-(
-void* buffer // IN: Block of memory to free
-)
-{
- if( buffer )
- {
- return ((pools_t *)((listHeader_t *)buffer-1)->pParentPool)->blockSize;
- }
-
- return 0;
-}
-
-/*! *********************************************************************************
-*************************************************************************************
-* Private functions
-*************************************************************************************
-********************************************************************************** */
-/*! *********************************************************************************
-* \brief This function updates the tracking array element corresponding to the given
-* block.
-*
-* \param[in] block - Pointer to the block.
-* \param[in] alloc - Indicates whether an allocation or free operation was performed
-* \param[in] address - Address where MEM_BufferAlloc or MEM_BufferFree was called
-* \param[in] requestedSize - Indicates the requested buffer size passed to MEM_BufferAlloc.
-* Has no use if a free operation was performed.
-*
-* \return Returns TRUE if correct allocation or dealocation was performed, FALSE if a
-* buffer was allocated or freed twice.
-*
-********************************************************************************** */
-#ifdef MEM_TRACKING
-uint8_t MEM_Track(listHeader_t *block, memTrackingStatus_t alloc, uint32_t address, uint16_t requestedSize)
-{
- uint16_t i;
- blockTracking_t *pTrack = NULL;
-#ifdef MEM_STATISTICS
- poolStat_t * poolStatistics = (poolStat_t *)&((pools_t *)( (listElementHandle_t)(block-1)->pParentPool ))->poolStatistics;
-#endif
-
- for( i=0; i<mTotalNoOfMsgs_c; i++ )
- {
- if( block == memTrack[i].blockAddr )
- {
- pTrack = &memTrack[i];
- break;
- }
- }
-
- if( !pTrack || pTrack->allocStatus == alloc)
- {
-#ifdef MEM_DEBUG
- panic( 0, (uint32_t)MEM_Track, 0, 0);
-#endif
- return FALSE;
- }
-
- pTrack->allocStatus = alloc;
-
- if(alloc == MEM_TRACKING_ALLOC_c)
- {
- pTrack->fragmentWaste = pTrack->blockSize - requestedSize;
- pTrack->allocCounter++;
- pTrack->allocAddr = (void *)address;
-#ifdef MEM_STATISTICS
-
- poolStatistics->poolFragmentWaste += pTrack->fragmentWaste;
- if(poolStatistics->poolFragmentWaste > poolStatistics->poolFragmentWastePeak)
- poolStatistics->poolFragmentWastePeak = poolStatistics->poolFragmentWaste;
-#endif /*MEM_STATISTICS*/
- }
- else
- {
-#ifdef MEM_STATISTICS
- poolStatistics->poolFragmentWaste -= pTrack->fragmentWaste;
-#endif /*MEM_STATISTICS*/
- pTrack->fragmentWaste = 0;
- pTrack->freeCounter++;
- pTrack->freeAddr = (void *)address;
- }
-
- return TRUE;
-}
-
-/*! *********************************************************************************
-* \brief This function checks for buffer overflow when copying multiple bytes
-*
-* \param[in] p - pointer to destination.
-* \param[in] size - number of bytes to copy
-*
-* \return 1 if overflow detected, else 0
-*
-********************************************************************************** */
-uint8_t MEM_BufferCheck(uint8_t *p, uint32_t size)
-{
- uint32_t i;
-
- if( (p < (uint8_t*)memHeap) || (p > ((uint8_t*)memHeap + sizeof(memHeap))) )
- return 0;
-
- for(i=0; i<mTotalNoOfMsgs_c-1; i++)
- {
- if( p > (uint8_t*)memTrack[i].blockAddr &&
- p < (uint8_t*)memTrack[i+1].blockAddr )
- {
- if( (p+size) > ((uint8_t*)memTrack[i+1].blockAddr - sizeof(listHeader_t)) )
- {
-#ifdef MEM_DEBUG
- panic(0,0,0,0);
-#endif
- return 1;
- }
-
- break;
- }
- }
- return 0;
-}
-#endif /*MEM_TRACKING*/
-
-/*! *********************************************************************************
-* \brief Performs a write-read-verify test for every byte in all memory pools.
-*
-* \return Returns MEM_SUCCESS_c if test was successful, MEM_ALLOC_ERROR_c if a
-* buffer was not allocated successufuly, MEM_FREE_ERROR_c if a
-* buffer was not freed successufuly or MEM_UNKNOWN_ERROR_c if a verify error,
-* heap overflow or data corruption occurred.
-*
-********************************************************************************** */
-uint32_t MEM_WriteReadTest(void)
-{
- uint8_t *data, count = 1;
- uint32_t idx1,idx2,idx3;
- uint32_t freeMsgs;
-
- /*memory write test*/
- freeMsgs = MEM_GetAvailableBlocks(0);
-
- for(idx1=0; poolInfo[idx1].blockSize != 0; idx1++)
- {
- for(idx2=0; idx2 < poolInfo[idx1].poolSize; idx2++)
- {
- data = (uint8_t *)MEM_BufferAlloc(poolInfo[idx1].blockSize);
-
- if(data == NULL)
- {
- return MEM_ALLOC_ERROR_c;
- }
-
- for(idx3=0; idx3 < poolInfo[idx1].blockSize; idx3++)
- {
- if(data > memHeap + heapSize)
- {
- return MEM_UNKNOWN_ERROR_c;
- }
- *data = count & 0xff;
- data++;
- }
- count++;
- }
- }
-
- count = 1;
- data = memHeap;
- /*memory read test*/
- for(idx1=0; poolInfo[idx1].blockSize != 0; idx1++)
- {
- for(idx2=0; idx2 < poolInfo[idx1].poolSize; idx2++)
- {
- /*New block; jump over list header*/
- data = data + sizeof(listHeader_t);
- for(idx3=0; idx3<poolInfo[idx1].blockSize; idx3++)
- {
- if(*data == count)
- {
- data++;
- }
- else
- {
- return MEM_UNKNOWN_ERROR_c;
- }
- }
- if(MEM_BufferFree( data - poolInfo[idx1].blockSize) != MEM_SUCCESS_c)
- {
- return MEM_FREE_ERROR_c;
- }
- count++;
- }
- }
- if(MEM_GetAvailableBlocks(0) != freeMsgs)
- {
- return MEM_UNKNOWN_ERROR_c;
- }
-#ifdef MEM_STATISTICS
- for(idx1 = 0; poolInfo[idx1].blockSize != 0; idx1++)
- {
- memPools[idx1].poolStatistics.allocatedBlocksPeak = 0;
- }
-#endif /*MEM_STATISTICS*/
-
- return MEM_SUCCESS_c;
-}
--- a/FSL_CONN_FWK/RNG/RNG.cpp Fri Jul 31 13:49:46 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,306 +0,0 @@
-/*!
-* Copyright (c) 2015, Freescale Semiconductor, Inc.
-* All rights reserved.
-*
-* \file RNG.c
-* RNG implementation file for the ARM CORTEX-M4 processor
-*
-* Redistribution and use in source and binary forms, with or without modification,
-* are permitted provided that the following conditions are met:
-*
-* o Redistributions of source code must retain the above copyright notice, this list
-* of conditions and the following disclaimer.
-*
-* o Redistributions in binary form must reproduce the above copyright notice, this
-* list of conditions and the following disclaimer in the documentation and/or
-* other materials provided with the distribution.
-*
-* o Neither the name of Freescale Semiconductor, Inc. nor the names of its
-* contributors may be used to endorse or promote products derived from this
-* software without specific prior written permission.
-*
-* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
-* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
-* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-*/
-
-
-#include "RNG_Interface.h"
-#include "fsl_device_registers.h"
-#include "fsl_clock_manager.h"
-//#include "SecLib.h"
-#include "FunctionLib.h"
-
-#if (gSecLib_HWSupport_d == gSecLib_MMCAUSupport_d)
-//#include "mmcau_interface.h"
-#endif
-
-#ifndef gRNG_UsePhyRngForInitialSeed_d
-#define gRNG_UsePhyRngForInitialSeed_d 0
-#endif
-
-#if (gRNG_HWSupport_d == gRNG_NoHWSupport_d)
- uint32_t mRandomNumber;
-
- #if gRNG_UsePhyRngForInitialSeed_d
- extern void PhyGetRandomNo(uint32_t *pRandomNo);
- #endif
-#endif
-
-/************************************************************************************
-*************************************************************************************
-* Private macros
-*************************************************************************************
-************************************************************************************/
-#define mPRNG_NoOfBits_c (160)
-#define mPRNG_NoOfBytes_c (mPRNG_NoOfBits_c/8)
-#define mPRNG_NoOfLongWords_c (mPRNG_NoOfBits_c/32)
-
-/************************************************************************************
-*************************************************************************************
-* Private memory declarations
-*************************************************************************************
-************************************************************************************/
-static uint32_t XKEY[mPRNG_NoOfLongWords_c];
-static uint32_t mPRNG_Requests = gRngMaxRequests_d;
-
-/************************************************************************************
-*************************************************************************************
-* Public functions
-*************************************************************************************
-************************************************************************************/
-
-/******************************************************************************
- * Name: RNG_Init()
- * Description: Initialize the RNG HW module
- * Parameter(s): -
- * Return: Status of the RNG module
- ******************************************************************************/
-uint8_t RNG_Init(void)
-{
-#if gRNG_HWSupport_d == gRNG_RNGAHWSupport_d
- CLOCK_SYS_EnableRngaClock(0);
- /* Mask Interrupts and start RNG */
- RNG_CR = RNG_CR_INTM_MASK | RNG_CR_HA_MASK | RNG_CR_GO_MASK;
-
-#elif gRNG_HWSupport_d == gRNG_RNGBHWSupport_d
- CLOCK_SYS_EnableRngbClock(0);
- /* Execute a SW Reset */
- RNG_CMD |= RNG_CMD_SR_MASK;
-
- /* Mask Interrupts */
- RNG_CR = RNG_CR_MASKDONE_MASK | RNG_CR_MASKERR_MASK;
-
- /* Start Self Test and Seed Generation */
- RNG_CMD = RNG_CMD_ST_MASK | RNG_CMD_GS_MASK;
-
- /* Wait for Self Test and Seed Generation to be done*/
- while (RNG_CMD & (RNG_CMD_ST_MASK | RNG_CMD_GS_MASK));
-
- /* Enable RNG Auto-Reseed */
- RNG_CR |= RNG_CR_AR_MASK;
-
- /* Check for Errors */
- if ( RNG_SR & RNG_SR_ERR_MASK )
- {
- return (uint8_t)(RNG_ESR);
- }
-#elif gRNG_HWSupport_d == gRNG_TRNGHWSupport_d
-// uint32_t temp;
-//
-// SIM_SCGC6 |= SIM_SCGC6_TRNG_MASK;
-//
-// /* Reset TRNG registers to default values */
-// HW_TRNG_RTMCTL_WR(gTRNG_BaseAddr_c, BM_TRNG_RTMCTL_RST_DEF | BM_TRNG_RTMCTL_PRGM);
-//
-// /* Enable Entropy Valid IRQ */
-// //disallow device to sleep, allow device to sleep in ISR
-// //HW_TRNG_SA_TRNG_INT_MASK_SET(gTRNG_BaseAddr_c, BM_TRNG_SA_TRNG_INT_MASK_SA_TRNG_SBS_ENTROPY_VALID);
-//
-// /* Set TRNG in Run mode, and enable entropy read access */
-// temp = HW_TRNG_RTMCTL_RD(gTRNG_BaseAddr_c);
-// temp &= ~(BM_TRNG_RTMCTL_PRGM | BM_TRNG_RTMCTL_ERR);
-// temp |= BM_TRNG_RTMCTL_TRNG_ACC;
-// HW_TRNG_RTMCTL_WR(gTRNG_BaseAddr_c, temp);
-#else
- #if gRNG_UsePhyRngForInitialSeed_d
- PhyGetRandomNo(&mRandomNumber);
- #else
- mRandomNumber = HW_SIM_UIDL_RD(SIM_BASE);
- #endif
-#endif /* gRNG_HwSupport_d == 1 */
-
- /* Init Successfull */
- return gRngSuccess_d;
-}
-
-/******************************************************************************
- * Name: RNG_HwGetRandomNo()
- * Description: Read a random number from the HW RNG module
- * Parameter(s): [OUT] pRandomNo - pointer to location where the RN will be stored
- * Return: status of the RNG module
- ******************************************************************************/
-#if (gRNG_HWSupport_d != gRNG_NoHWSupport_d)
-static uint8_t RNG_HwGetRandomNo(uint32_t* pRandomNo)
-{
-#if gRNG_HWSupport_d == gRNG_RNGAHWSupport_d
- /* If output register is empty, wait for a new random number */
- while ( ((RNG_SR & RNG_SR_OREG_LVL_MASK) >> RNG_SR_OREG_LVL_SHIFT) == 0 );
-
- /* Copy the output of RNG module */
- *pRandomNo = RNG_OR;
-
-#elif gRNG_HWSupport_d == gRNG_RNGBHWSupport_d
- /* Check for Errors */
- if ( RNG_SR & RNG_SR_ERR_MASK )
- return (uint8_t)(RNG_ESR);
-
- /* If output FIFO is empty, wait for a new random number */
- while (((RNG_SR & RNG_SR_FIFO_LVL_MASK) >> RNG_SR_FIFO_LVL_SHIFT) == 0 );
-
- /* Copy the output of RNG module */
- *pRandomNo = RNG_OUT;
-
-#elif gRNG_HWSupport_d == gRNG_TRNGHWSupport_d
- static uint8_t entropyIdx = 0;
-
- /* wait for entropy to be generated or for an error */
- while( !(HW_TRNG_RTMCTL_RD(gTRNG_BaseAddr_c) & (BM_TRNG_RTMCTL_ENT_VAL | BM_TRNG_RTMCTL_ERR)) );
-
- if( HW_TRNG_RTMCTL_RD(gTRNG_BaseAddr_c) & BM_TRNG_RTMCTL_ERR )
- return gRngInternalError_d;
-
- *pRandomNo = HW_TRNG_RTENTan_RD(gTRNG_BaseAddr_c, entropyIdx);
- if( ++entropyIdx == 16 )
- {
- entropyIdx = 0;
- //disallow device to sleep
- }
-#endif
-
- return gRngSuccess_d;
-}
-#endif /* gRNG_HwSupport_d */
-
-
-/******************************************************************************
- * Name: RNG_GetRandomNo()
- * Description: Read a random number from RNG module or from 802.15.4 PHY
- * Parameter(s): [OUT] pRandomNo - pointer to location where the RN will be stored
- * Return: none
- ******************************************************************************/
-void RNG_GetRandomNo(uint32_t* pRandomNo)
-{
- /* Check for NULL pointers */
- if (NULL == pRandomNo)
- return;
-
-#if (gRNG_HWSupport_d == gRNG_NoHWSupport_d)
- mRandomNumber = (mRandomNumber * 6075) + 1283;
- FLib_MemCpy(pRandomNo, &mRandomNumber, sizeof(uint32_t));
-#else
- (void)RNG_HwGetRandomNo(pRandomNo);
-#endif
-}
-
-/******************************************************************************
- * Name: RNG_SetPseudoRandomNoSeed()
- * Description: Initialize seed for the PRNG algorithm.
- * Parameter(s):
- * pSeed - pointer to a buffer containing 20 bytes (160 bits).
- * Can be set using the RNG_GetRandomNo() function.
- * Return: None
- ******************************************************************************/
-void RNG_SetPseudoRandomNoSeed(uint8_t* pSeed)
-{
- mPRNG_Requests = 1;
- FLib_MemCpy( XKEY, pSeed, mPRNG_NoOfBytes_c );
-}
-
-#if 0
-/******************************************************************************
- * Name: RNG_GetRandomNo()
- *
- * Description: Pseudo Random Number Generator (PRNG) implementation
- * according to NIST FIPS Publication 186-2, APPENDIX 3
- *
- * Let x be the signer's private key. The following may be used to generate m values of x:
- * Step 1. Choose a new, secret value for the seed-key, XKEY.
- * Step 2. In hexadecimal notation let
- * t = 67452301 EFCDAB89 98BADCFE 10325476 C3D2E1F0.
- * This is the initial value for H0 || H1 || H2 || H3 || H4 in the SHS.
- * Step 3. For j = 0 to m - 1 do
- * a. XSEEDj = optional user input.
- * b. XVAL = (XKEY + XSEEDj) mod 2^b
- * c. xj = G(t,XVAL) mod q
- * d. XKEY = (1 + XKEY + xj) mod 2^b
- *
- * Parameter(s):
- * pOut - pointer to the output buffer
- * outBytes - the number of bytes to be copyed (1-20)
- * pXSEED - optional user SEED. Should be NULL if not used.
- *
- * Return: The number of bytes copied or -1 if reseed is needed
- ******************************************************************************/
-int16_t RNG_GetPseudoRandomNo(uint8_t* pOut, uint8_t outBytes, uint8_t* pXSEED)
-{
- uint32_t i;
- sha1Context_t ctx;
-
- if (mPRNG_Requests == gRngMaxRequests_d)
- return -1;
-
- mPRNG_Requests++;
-
- /* a. XSEEDj = optional user input. */
- if (pXSEED)
- {
- /* b. XVAL = (XKEY + XSEEDj) mod 2^b */
- for (i=0; i<mPRNG_NoOfBytes_c; i++)
- {
- ctx.buffer[i] = ((uint8_t*)XKEY)[i] + pXSEED[i];
- }
- }
- else
- {
- for (i=0; i<mPRNG_NoOfBytes_c; i++)
- {
- ctx.buffer[i] = ((uint8_t*)XKEY)[i];
- }
- }
-
- /* c. xj = G(t,XVAL) mod q
- ***************************/
- SHA1_Hash(&ctx, ctx.buffer, mPRNG_NoOfBytes_c);
-
- /* d. XKEY = (1 + XKEY + xj) mod 2^b */
- XKEY[0] += 1;
- for (i=0; i<mPRNG_NoOfLongWords_c; i++)
- {
- XKEY[i] += ctx.hash[i];
- }
-
- /* Check if the length provided exceeds the output data size */
- if (outBytes > mPRNG_NoOfBytes_c)
- {
- outBytes = mPRNG_NoOfBytes_c;
- }
-
- /* Copy the generated number */
- for (i=0; i < outBytes; i++)
- {
- pOut[i] = ((uint8_t*)ctx.hash)[i];
- }
-
- return outBytes;
-}
-#endif
-
-/********************************** EOF ***************************************/
--- a/FSL_CONN_FWK/RNG/RNG_Interface.h Fri Jul 31 13:49:46 2015 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,114 +0,0 @@ -/*! -* Copyright (c) 2015, Freescale Semiconductor, Inc. -* All rights reserved. -* -* \file RNG_interface.h -* RNG implementation header file for the ARM CORTEX-M4 processor -* -* Redistribution and use in source and binary forms, with or without modification, -* are permitted provided that the following conditions are met: -* -* o Redistributions of source code must retain the above copyright notice, this list -* of conditions and the following disclaimer. -* -* o Redistributions in binary form must reproduce the above copyright notice, this -* list of conditions and the following disclaimer in the documentation and/or -* other materials provided with the distribution. -* -* o Neither the name of Freescale Semiconductor, Inc. nor the names of its -* contributors may be used to endorse or promote products derived from this -* software without specific prior written permission. -* -* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR -* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -*/ - -#ifndef _RNG_INTERFACE_H_ -#define _RNG_INTERFACE_H_ - -#include "EmbeddedTypes.h" - - -/****************************************************************************** -******************************************************************************* -* Public macros -******************************************************************************* -******************************************************************************/ -#define gRNG_NoHWSupport_d 0 -#define gRNG_RNGAHWSupport_d 1 -#define gRNG_RNGBHWSupport_d 2 -#define gRNG_TRNGHWSupport_d 3 - -#ifndef gRNG_HWSupport_d -#define gRNG_HWSupport_d gRNG_NoHWSupport_d -#endif - -#define gRngSuccess_d (0x00) -#define gRngInternalError_d (0x01) -#define gRngNullPointer_d (0x80) -#define gRngMaxRequests_d (100000) - - -/****************************************************************************** -******************************************************************************* -* Public type definitions -******************************************************************************* -******************************************************************************/ - -/****************************************************************************** -******************************************************************************* -* Public memory declarations -******************************************************************************* -******************************************************************************/ - -/****************************************************************************** -******************************************************************************* -* Public function prototypes -******************************************************************************* -******************************************************************************/ - -/****************************************************************************** - * Name: RNG_Init() - * Description: Initialize the RNG HW module - * Parameter(s): - - * Return: Status of the RNG module - ******************************************************************************/ -uint8_t RNG_Init(void); - -/****************************************************************************** - * Name: RNG_GetRandomNo() - * Description: Reads a 32-bit statistically random number from the RNG module or from 802.15.4 PHY - * Parameter(s): [OUT] pRandomNo - pointer to location where the RN will be stored - * Return: none - ******************************************************************************/ -void RNG_GetRandomNo(uint32_t* pRandomNo); - -/****************************************************************************** - * Name: PRNG_SetSeed() - * Description: Initialize seed for the PRNG algorithm. - * Parameter(s): - * pSeed - can be set using the RNG_GetRandomNo() function - * Return: None - ******************************************************************************/ -void RNG_SetPseudoRandomNoSeed(uint8_t* pSeed); - -/****************************************************************************** - * Name: PRNG_GetRandomNo() - * Description: Generates a NIST FIPS Publication 186-2-compliant 160 bit pseudo-random number - * Parameter(s): - * pOut - pointer to the output buffer - * outBytes - the number of bytes to be copyed (1-20) - * pXSEED - optional user SEED. Should be NULL if not used. - * Return: The number of bytes copied or -1 if reseed is needed - ******************************************************************************/ -int16_t RNG_GetPseudoRandomNo(uint8_t* pOut, uint8_t outBytes, uint8_t* pXSEED); - -#endif /* _RNG_INTERFACE_H_ */
--- a/FSL_CONN_FWK/Utils/FunctionLib/FunctionLib.c Fri Jul 31 13:49:46 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,496 +0,0 @@
-/*!
-* Copyright (c) 2015, Freescale Semiconductor, Inc.
-* All rights reserved.
-*
-* \file FunctionLib.c
-* This module contains various common functions like copy and compare routines.
-*
-* Redistribution and use in source and binary forms, with or without modification,
-* are permitted provided that the following conditions are met:
-*
-* o Redistributions of source code must retain the above copyright notice, this list
-* of conditions and the following disclaimer.
-*
-* o Redistributions in binary form must reproduce the above copyright notice, this
-* list of conditions and the following disclaimer in the documentation and/or
-* other materials provided with the distribution.
-*
-* o Neither the name of Freescale Semiconductor, Inc. nor the names of its
-* contributors may be used to endorse or promote products derived from this
-* software without specific prior written permission.
-*
-* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
-* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
-* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-*/
-
-#include "FunctionLib.h"
-
-#if gUseToolchainMemFunc_d
-#include <string.h>
-#endif
-
-/*! *********************************************************************************
-*************************************************************************************
-* Private macros
-*************************************************************************************
-********************************************************************************** */
-
-/*! *********************************************************************************
-*************************************************************************************
-* Private prototypes
-*************************************************************************************
-********************************************************************************** */
-
-/*! *********************************************************************************
-*************************************************************************************
-* Private type definitions
-*************************************************************************************
-********************************************************************************** */
-
-/*! *********************************************************************************
-*************************************************************************************
-* Public memory declarations
-*************************************************************************************
-********************************************************************************** */
-
-/*! *********************************************************************************
-*************************************************************************************
-* Private memory declarations
-*************************************************************************************
-********************************************************************************** */
-
-/*! *********************************************************************************
-*************************************************************************************
-* Public functions
-*************************************************************************************
-********************************************************************************** */
-
-/*! *********************************************************************************
-* \brief This function copies bytes from one buffer to another.
-* The buffers should not overlap.
-*
-* \param[in, out] pDst Pointer to the destination buffer.
-*
-* \param[in] pSrc Pointer to the source buffer.
-*
-* \param[in] cBytes Number of bytes to copy.
-*
-* \post The source and destination buffers must not overlap.
-*
-* \remarks
-*
-********************************************************************************** */
-void FLib_MemCpy (void* pDst,
- void* pSrc,
- uint32_t cBytes)
-{
-#if gUseToolchainMemFunc_d
- memcpy(pDst, pSrc, cBytes);
-#else
- while (cBytes)
- {
- *((uint8_t*)pDst) = *((uint8_t*)pSrc);
- pDst = ((uint8_t*)pDst)+1;
- pSrc = ((uint8_t*)pSrc)+1;
- cBytes--;
- }
-#endif
-}
-
-/*! *********************************************************************************
-* \brief This function copies the specified number of bytes from the
-* source address to the destination address. No attempt is made
-* to handle overlapping copies to prevent loss of data.
-* The copying is optimized to avoid alignment problems, and attempts
-* to copy 32bit numbers optimally.
-*
-* \param[in] from_ptr Pointer to the source buffer.
-*
-* \param[in, out] to_ptr Pointer to the destination buffer.
-*
-* \param[in] number_of_bytes Number of bytes to copy (32 bit value).
-*
-* \post
-*
-* \remarks
-*
-********************************************************************************** */
-void FLib_MemCpyAligned32bit (void* to_ptr,
- void* from_ptr,
- register uint32_t number_of_bytes)
-{
- uint8_t* from8_ptr = (uint8_t*)from_ptr;
- uint8_t* to8_ptr = (uint8_t*)to_ptr;
- uint16_t* from16_ptr = (uint16_t*)from_ptr;
- uint16_t* to16_ptr = (uint16_t*)to_ptr;
- register uint32_t* from32_ptr = (uint32_t*)from_ptr;
- register uint32_t* to32_ptr = (uint32_t*)to_ptr;
-
- register uint32_t loops;
-
- if (number_of_bytes > 3)
- {
- /* Try to align source on word */
- if ((uint32_t)from_ptr & 1)
- {
- from8_ptr = (uint8_t*)from_ptr;
- to8_ptr = (uint8_t*)to_ptr;
-
- *to8_ptr++ = *from8_ptr++;
-
- from_ptr = from8_ptr;
- to_ptr = to8_ptr;
- --number_of_bytes;
- }
-
- /* Try to align source on longword */
- if ((uint32_t)from_ptr & 2)
- {
- from16_ptr = (uint16_t*)from_ptr;
- to16_ptr = (uint16_t*)to_ptr;
-
- *to16_ptr++ = *from16_ptr++;
-
- from_ptr = from16_ptr;
- to_ptr = to16_ptr;
- number_of_bytes -= 2;
- }
-
- from32_ptr = (uint32_t*)from_ptr;
- to32_ptr = (uint32_t*)to_ptr;
-
- for (loops = number_of_bytes >> 2; loops != 0; loops--)
- {
- *to32_ptr++ = *from32_ptr++;
- }
-
- from_ptr = from32_ptr;
- to_ptr = to32_ptr;
- }
-
- /* Copy all remaining bytes */
- if (number_of_bytes & 2)
- {
- from16_ptr = (uint16_t*)from_ptr;
- to16_ptr = (uint16_t*)to_ptr;
-
- *to16_ptr++ = *from16_ptr++;
-
- from_ptr = from16_ptr;
- to_ptr = to16_ptr;
- }
-
- if (number_of_bytes & 1)
- {
- *(uint8_t*)to_ptr = *(uint8_t*)from_ptr;
- }
-}
-
-
-/*! *********************************************************************************
-* \brief Copy bytes from one buffer to another. The buffers should not overlap.
-* The function can copy in either direction. If 'dir' is TRUE, then the function
-* works like FLib_MemCpy(). If FALSE, the function swaps the buffer pointers
-* before copying.
-*
-* \param[in, out] pBuf1 Pointer to the destination/source buffer.
-*
-* \param[in, out] pBuf2 Pointer to the source/destination buffer.
-*
-* \param[in] dir Direction to copy: pBuf2->pBuf1 if TRUE, pBuf1->pBuf2 if FALSE
-*
-* \param[in] n Number of bytes to copy.
-*
-* \post The source and destination buffers must not overlap.
-*
-* \remarks
-*
-********************************************************************************** */
-void FLib_MemCpyDir (void* pBuf1,
- void* pBuf2,
- bool_t dir,
- uint32_t n)
-{
- if (dir)
- {
- FLib_MemCpy (pBuf1, pBuf2, n);
- }
- else
- {
- FLib_MemCpy (pBuf2, pBuf1, n);
- }
-}
-
-
-/*! *********************************************************************************
-* \brief The byte at index i from the source buffer is copied to index ((n-1) - i)
-* in the destination buffer (and vice versa).
-*
-* \param[in, out] pDst Pointer to the destination buffer.
-*
-* \param[in] pSrc Pointer to the source buffer.
-*
-* \param[in] cBytes Number of bytes to copy.
-*
-* \post
-*
-* \remarks
-*
-********************************************************************************** */
-void FLib_MemCpyReverseOrder (void* pDst,
- void* pSrc,
- uint32_t cBytes)
-{
- if(cBytes == 0)
- {
- return;
- }
- pDst = (uint8_t*)pDst + (uint32_t)(cBytes-1);
- while (cBytes)
- {
- *((uint8_t*)pDst) = *((uint8_t*)pSrc);
- pDst = (uint8_t*)pDst-1;
- pSrc = (uint8_t*)pSrc+1;
- cBytes--;
- }
-}
-
-
-/*! *********************************************************************************
-* \brief This function compares two buffers.
-*
-* \param[in] pData1 First buffer to compare.
-*
-* \param[in] pData2 Second buffer to compare.
-*
-* \param[in] cBytes Number of bytes to compare.
-*
-* \return This function return TRUE if the buffers are equal and FALSE otherwise.
-*
-* \post
-*
-* \remarks
-*
-********************************************************************************** */
-bool_t FLib_MemCmp (void* pData1, // IN: First memory block to compare
- void* pData2, // IN: Second memory block to compare
- uint32_t cBytes // IN: Number of bytes to compare.
- )
-{
-#if gUseToolchainMemFunc_d
- if( memcmp(pData1, pData2, cBytes) )
- return FALSE;
-#else
- while (cBytes)
- {
- if ( *((uint8_t *)pData1) != *((uint8_t *)pData2))
- {
- return FALSE;
- }
-
- pData2 = (uint8_t* )pData2+1;
- pData1 = (uint8_t* )pData1+1;
- cBytes--;
- }
-#endif
- return TRUE;
-}
-
-
-/*! *********************************************************************************
-* \brief This function resets all bytes in a specified buffer to a set value.
-*
-* \param[in,out] pDst Address of the buffer to set.
-*
-* \param[in] value Set value.
-*
-* \param[in] cBytes Number of bytes to set in the buffer (maximum 255 bytes).
-*
-* \post
-*
-* \remarks
-*
-********************************************************************************** */
-void FLib_MemSet (void* pDst,
- uint8_t value,
- uint32_t cBytes)
-{
-#if gUseToolchainMemFunc_d
- memset(pDst, value, cBytes);
-#else
- while (cBytes)
- {
- ((uint8_t* )pDst)[--cBytes] = value;
- }
-#endif
-}
-
-
-/*! *********************************************************************************
-* \brief This function copies a buffer,
-* possibly into the same overlapping memory as it is taken from
-*
-* \param[in, out] pDst Pointer to the destination buffer.
-*
-* \param[in] pSrc Pointer to the source buffer.
-*
-* \param[in] cBytes Number of bytes to copy.
-*
-* \post
-*
-* \remarks
-*
-********************************************************************************** */
-void FLib_MemInPlaceCpy (void* pDst,
- void* pSrc,
- uint32_t cBytes)
-{
- if (pDst != pSrc)
- {
- /* Do nothing if copying to same position */
- if (pDst < pSrc)
- {
- /* If dst is before src in memory copy forward */
-#if gUseToolchainMemFunc_d
- memcpy(pDst, pSrc, cBytes);
-#else
- while (cBytes)
- {
- *((uint8_t*)pDst) = *((uint8_t*)pSrc);
- pDst = ((uint8_t*)pDst)+1;
- pSrc = ((uint8_t*)pSrc)+1;
- cBytes--;
- }
-#endif
- }
- else
- {
- /* If dst is after src in memory copy backward */
- while(cBytes)
- {
- cBytes--;
- ((uint8_t* )pDst)[cBytes] = ((uint8_t* )pSrc)[cBytes];
- }
- }
- }
-}
-
-/*! *********************************************************************************
-* \brief This function copies a 16bit value to an unaligned a memory block.
-*
-* \param[in, out] pDst Pointer to the destination memory block.
-*
-* \param[in] val16 The value to be copied.
-*
-********************************************************************************** */
-void FLib_MemCopy16Unaligned (void* pDst,
- uint16_t val16)
-{
- uint8_t* pData = (uint8_t*)pDst;
-
- *pData++ = (uint8_t)(val16);
- *pData = (uint8_t)(val16 >> 8);
-
- return;
-}
-
-
-/*! *********************************************************************************
-* \brief This function copies a 32bit value to an unaligned a memory block.
-*
-* \param[in, out] pDst Pointer to the destination memory block.
-*
-* \param[in] val32 The value to be copied.
-*
-********************************************************************************** */
-void FLib_MemCopy32Unaligned (void* pDst,
- uint32_t val32)
-{
- uint8_t* pData = (uint8_t*)pDst;
-
- *pData++ = (uint8_t)(val32);
- *pData++ = (uint8_t)(val32 >> 8);
- *pData++ = (uint8_t)(val32 >> 16);
- *pData++ = (uint8_t)(val32 >> 24);
-
- return;
-}
-
-
-/*! *********************************************************************************
-* \brief This function copies a 64bit value to an unaligned a memory block.
-*
-* \param[in, out] pDst Pointer to the destination memory block.
-*
-* \param[in] val64 The value to be copied.
-*
-********************************************************************************** */
-void FLib_MemCopy64Unaligned (void* pDst,
- uint64_t val64)
-{
- uint8_t* pData = (uint8_t*)pDst;
-
- *pData++ = (uint8_t)(val64);
- *pData++ = (uint8_t)(val64 >> 8);
- *pData++ = (uint8_t)(val64 >> 16);
- *pData++ = (uint8_t)(val64 >> 24);
- *pData++ = (uint8_t)(val64 >> 32);
- *pData++ = (uint8_t)(val64 >> 40);
- *pData++ = (uint8_t)(val64 >> 48);
- *pData = (uint8_t)(val64 >> 56);
-
- return;
-}
-
-
-/*! *********************************************************************************
-* \brief This function adds an offset to a pointer.
-*
-* \param[in,out] pPtr Pointer to the pointer to add the offset to
-*
-* \param[in] offset Offset to add to the specified pointer.
-*
-* \post
-*
-* \remarks
-*
-********************************************************************************** */
-void FLib_AddOffsetToPointer (void** pPtr,
- uint32_t offset)
-{
- (*pPtr) = ((uint8_t* )*pPtr) + offset;
-}
-
-
-/*! *********************************************************************************
-* \brief This function returns the length of a NULL terminated string.
-*
-* \param[in] str A NULL terminated string
-*
-* \return the size of string in bytes
-*
-********************************************************************************** */
-uint32_t FLib_StrLen(char *str)
-{
-#if gUseToolchainMemFunc_d
- return strlen(str);
-#else
- register uint32_t len=0;
-
- while(*str != '\0')
- {
- str++;
- len++;
- }
-
- return len;
-#endif
-}
--- a/FSL_CONN_FWK/Utils/FunctionLib/FunctionLib.h Fri Jul 31 13:49:46 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,266 +0,0 @@
-/*!
-* Copyright (c) 2015, Freescale Semiconductor, Inc.
-* All rights reserved.
-*
-* \file FunctionLib.h
-* This is the Function Lib module header file
-*
-* Redistribution and use in source and binary forms, with or without modification,
-* are permitted provided that the following conditions are met:
-*
-* o Redistributions of source code must retain the above copyright notice, this list
-* of conditions and the following disclaimer.
-*
-* o Redistributions in binary form must reproduce the above copyright notice, this
-* list of conditions and the following disclaimer in the documentation and/or
-* other materials provided with the distribution.
-*
-* o Neither the name of Freescale Semiconductor, Inc. nor the names of its
-* contributors may be used to endorse or promote products derived from this
-* software without specific prior written permission.
-*
-* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
-* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
-* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-*/
-
-#ifndef _FUNCTION_LIB_H_
-#define _FUNCTION_LIB_H_
-
-#include "EmbeddedTypes.h"
-
-/*! *********************************************************************************
-*************************************************************************************
-* Public macros
-*************************************************************************************
-********************************************************************************** */
-
-#ifndef gUseToolchainMemFunc_d
-#define gUseToolchainMemFunc_d 0
-#endif
-
-#define FLib_MemSet16 FLib_MemSet
-
-/*! *********************************************************************************
-*************************************************************************************
-* Public prototypes
-*************************************************************************************
-********************************************************************************** */
-
-/*! *********************************************************************************
-*************************************************************************************
-* Public type definitions
-*************************************************************************************
-********************************************************************************** */
-
-/*! *********************************************************************************
-*************************************************************************************
-* Public memory declarations
-*************************************************************************************
-********************************************************************************** */
-
-/*! *********************************************************************************
-*************************************************************************************
-* Public functions
-*************************************************************************************
-********************************************************************************** */
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/*! *********************************************************************************
-* \brief Copy the content of one memory block to another. The amount of data to copy
-* must be specified in number of bytes.
-*
-* \param[out] pDst Pointer to destination memory block
-* \param[in] pSrc Pointer to source memory block
-* \param[in] cBytes Number of bytes to copy
-*
-********************************************************************************** */
-void FLib_MemCpy (void* pDst,
- void* pSrc,
- uint32_t cBytes
- );
-
-void FLib_MemCpyAligned32bit (void* to_ptr,
- void* from_ptr,
- register uint32_t number_of_bytes);
-
-void FLib_MemCpyDir (void* pBuf1,
- void* pBuf2,
- bool_t dir,
- uint32_t n);
-
-
-/*! *********************************************************************************
-* \brief Copy bytes. The byte at index i from the source buffer is copied to index
-* ((n-1) - i) in the destination buffer (and vice versa).
-*
-* \param[out] pDst Pointer to destination memory block
-* \param[in] pSrc Pointer to source memory block
-* \param[in] cBytes Number of bytes to copy
-*
-********************************************************************************** */
-void FLib_MemCpyReverseOrder (void* pDst,
- void* pSrc,
- uint32_t cBytes
- );
-
-
-/*! *********************************************************************************
-* \brief Compare two memory blocks. The number of bytes to compare must be specified.
-* If the blocks are equal byte by byte, the function returns TRUE,
-* and FALSE otherwise.
-*
-* \param[in] pData1 First memory block to compare
-* \param[in] pData2 Second memory block to compare
-* \param[in] cBytes Number of bytes to compare
-*
-* \return TRUE if memory areas are equal. FALSE othwerwise.
-*
-********************************************************************************** */
-bool_t FLib_MemCmp (void* pData1,
- void* pData2,
- uint32_t cBytes
- );
-
-
-/*! *********************************************************************************
-* \brief Reset bytes in a memory block to a certain value. The value, and the number
-* of bytes to be set, are supplied as arguments.
-*
-* \param[in] pData Pointer to memory block to reset
-* \param[in] value Value that memory block will be set to
-* \param[in] cBytes Number of bytes to set
-*
-********************************************************************************** */
- void FLib_MemSet (void* pData,
- uint8_t value,
- uint32_t cBytes
- );
-
-
-/*! *********************************************************************************
-* \brief Copy bytes, possibly into the same overlapping memory as it is taken from
-*
-* \param[out] pDst Pointer to destination memory block
-* \param[in] pSrc Pointer to source memory block
-* \param[in] cBytes Number of bytes to copy
-*
-********************************************************************************** */
-void FLib_MemInPlaceCpy (void* pDst,
- void* pSrc,
- uint32_t cBytes
- );
-
-
-/*! *********************************************************************************
-* \brief Copies a 16bit value to an unaligned a memory block.
-*
-* \param[out] pDst Pointer to destination memory block
-* \param[in] val16 The 16-bit value to be copied
-*
-********************************************************************************** */
-void FLib_MemCopy16Unaligned (void* pDst,
- uint16_t val16
- );
-
-
-/*! *********************************************************************************
-* \brief Copies a 32bit value to an unaligned a memory block.
-*
-* \param[out] pDst Pointer to destination memory block
-* \param[in] val32 The 32-bit value to be copied
-*
-********************************************************************************** */
-void FLib_MemCopy32Unaligned (void* pDst,
- uint32_t val32
- );
-
-
-/*! *********************************************************************************
-* \brief Copies a 64bit value to an unaligned a memory block.
-*
-* \param[out] pDst Pointer to destination memory block
-* \param[in] val64 The 64-bit value to be copied
-*
-********************************************************************************** */
-void FLib_MemCopy64Unaligned (void* pDst,
- uint64_t val64
- );
-
-
-/*! *********************************************************************************
-* \brief Add an offset to a pointer.
-*
-* \param[out] pPtr Pointer to the pointer to be updated
-* \param[in] offset The offset(in bytes) to be added
-*
-********************************************************************************** */
-void FLib_AddOffsetToPointer (void** pPtr,
- uint32_t offset);
-
-#define FLib_AddOffsetToPtr(pPtr,offset) FLib_AddOffsetToPointer((void**)(pPtr),(offset))
-
-
-/*! *********************************************************************************
-* \brief This function returns the length of a NULL terminated string.
-*
-* \param[in] str A NULL terminated string
-*
-* \return the size of string in bytes
-*
-********************************************************************************** */
-uint32_t FLib_StrLen(char *str);
-
-
-/*! *********************************************************************************
-* \brief Compare two bytes.
-*
-* \param[in] c1 first byte to compare
-* \param[in] c2 second byte to compare
-*
-* \return TRUE if the two bytes are equal, and FALSE otherwise.
-*
-********************************************************************************** */
-#define FLib_Cmp2Bytes(c1, c2) (*((uint16_t*) (c1)) == *((uint16_t*) (c2)))
-
-
-/*! *********************************************************************************
-* \brief Returns the maximum value of arguments a and b.
-*
-* \return The maximum value of arguments a and b
-*
-* \remarks
-* The primitive should must be implemented as a macro, as it should be possible to
-* evaluate the result on compile time if the arguments are constants.
-*
-********************************************************************************** */
-#define FLib_GetMax(a,b) (((a) > (b)) ? (a) : (b))
-
-
-/*! *********************************************************************************
-* \brief Returns the minimum value of arguments a and b.
-*
-* \return The minimum value of arguments a and b
-*
-* \remarks
-* The primitive should must be implemented as a macro, as it should be possible to
-* evaluate the result on compile time if the arguments are constants.
-*
-********************************************************************************** */
-#define FLib_GetMin(a,b) (((a) < (b)) ? (a) : (b))
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* _FUNCTION_LIB_H_ */
--- a/FSL_CONN_FWK/Utils/GenericList/GenericList.c Fri Jul 31 13:49:46 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,583 +0,0 @@
-/*!
-* Copyright (c) 2015, Freescale Semiconductor, Inc.
-* All rights reserved.
-*
-* \file GenericList.c
-* This is the source file for the linked lists part of the Utils package.
-*
-* Redistribution and use in source and binary forms, with or without modification,
-* are permitted provided that the following conditions are met:
-*
-* o Redistributions of source code must retain the above copyright notice, this list
-* of conditions and the following disclaimer.
-*
-* o Redistributions in binary form must reproduce the above copyright notice, this
-* list of conditions and the following disclaimer in the documentation and/or
-* other materials provided with the distribution.
-*
-* o Neither the name of Freescale Semiconductor, Inc. nor the names of its
-* contributors may be used to endorse or promote products derived from this
-* software without specific prior written permission.
-*
-* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
-* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
-* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-*/
-
-/*! *********************************************************************************
-*************************************************************************************
-* Include
-*************************************************************************************
-********************************************************************************** */
-#include "GenericList.h"
-#include "mbedAbstraction.h"
-
-
-
-/*! *********************************************************************************
-*************************************************************************************
-* Public functions
-*************************************************************************************
-********************************************************************************** */
-/*! *********************************************************************************
-* \brief Initialises the list descriptor.
-*
-* \param[in] list - List handle to init.
-* max - Maximum number of elements in list. 0 for unlimited.
-*
-* \return void.
-*
-* \pre
-*
-* \post
-*
-* \remarks
-*
-********************************************************************************** */
-
-void ListInit(listHandle_t list, uint32_t max)
-{
- list->head = NULL;
- list->tail = NULL;
- list->max = max;
- list->size = 0;
-}
-
-/*! *********************************************************************************
-* \brief Gets the list that contains the given element.
-*
-* \param[in] element - Handle of the element.
-*
-* \return NULL if element is orphan.
-* Handle of the list the element is inserted into.
-*
-* \pre
-*
-* \post
-*
-* \remarks
-*
-********************************************************************************** */
-listHandle_t ListGetList(listElementHandle_t elementHandle)
-{
- return elementHandle->list;
-}
-
-/*! *********************************************************************************
-* \brief Links element to the tail of the list.
-*
-* \param[in] list - ID of list to insert into.
-* element - element to add
-*
-* \return gListFull_c if list is full.
-* gListOk_c if insertion was successful.
-*
-* \pre
-*
-* \post
-*
-* \remarks
-*
-********************************************************************************** */
-listStatus_t ListAddTail(listHandle_t list, listElementHandle_t element)
-{
- OSA_EnterCritical(kCriticalDisableInt);
-
- if( (list->max != 0) && (list->max == list->size) )
- {
- OSA_ExitCritical(kCriticalDisableInt);
- return gListFull_c;
- }
-
- if(list->size == 0)
- {
- list->head = element;
- }
- else
- {
- list->tail->next = element;
- }
- element->prev = list->tail;
- element->next = NULL;
- element->list = list;
- list->tail = element;
- list->size++;
-
- OSA_ExitCritical(kCriticalDisableInt);
- return gListOk_c;
-}
-
-/*! *********************************************************************************
-* \brief Links element to the head of the list.
-*
-* \param[in] list - ID of list to insert into.
-* element - element to add
-*
-* \return gListFull_c if list is full.
-* gListOk_c if insertion was successful.
-*
-* \pre
-*
-* \post
-*
-* \remarks
-*
-********************************************************************************** */
-listStatus_t ListAddHead(listHandle_t list, listElementHandle_t element)
-{
- OSA_EnterCritical(kCriticalDisableInt);
-
- if( (list->max != 0) && (list->max == list->size) )
- {
- OSA_ExitCritical(kCriticalDisableInt);
- return gListFull_c;
- }
-
- if(list->size == 0)
- {
- list->tail = element;
- }
- else
- {
- list->head->prev = element;
- }
- element->next = list->head;
- element->prev = NULL;
- element->list = list;
- list->head = element;
- list->size++;
-
- OSA_ExitCritical(kCriticalDisableInt);
- return gListOk_c;
-}
-
-/*! *********************************************************************************
-* \brief Unlinks element from the head of the list.
-*
-* \param[in] list - ID of list to remove from.
-*
-* \return NULL if list is empty.
-* ID of removed element(pointer) if removal was successful.
-*
-* \pre
-*
-* \post
-*
-* \remarks
-*
-********************************************************************************** */
-listElementHandle_t ListRemoveHead(listHandle_t list)
-{
- listElementHandle_t element;
-
- OSA_EnterCritical(kCriticalDisableInt);
-
- if(NULL == list || list->size == 0)
- {
- OSA_ExitCritical(kCriticalDisableInt);
- return NULL; /*List is empty*/
- }
-
- element = list->head;
- list->size--;
- if(list->size == 0)
- {
- list->tail = NULL;
- }
- else
- {
- element->next->prev = NULL;
- }
- list->head = element->next; /*Is NULL if element is head*/
- element->list = NULL;
-
- OSA_ExitCritical(kCriticalDisableInt);
- return element;
-}
-
-/*! *********************************************************************************
-* \brief Gets head element ID.
-*
-* \param[in] list - ID of list.
-*
-* \return NULL if list is empty.
-* ID of head element if list is not empty.
-*
-* \pre
-*
-* \post
-*
-* \remarks
-*
-********************************************************************************** */
-listElementHandle_t ListGetHead(listHandle_t list)
-{
- return list->head;
-}
-
-/*! *********************************************************************************
-* \brief Gets next element ID.
-*
-* \param[in] element - ID of the element.
-*
-* \return NULL if element is tail.
-* ID of next element if exists.
-*
-* \pre
-*
-* \post
-*
-* \remarks
-*
-********************************************************************************** */
-listElementHandle_t ListGetNext(listElementHandle_t element)
-{
- return element->next;
-}
-
-/*! *********************************************************************************
-* \brief Gets previous element ID.
-*
-* \param[in] element - ID of the element.
-*
-* \return NULL if element is head.
-* ID of previous element if exists.
-*
-* \pre
-*
-* \post
-*
-* \remarks
-*
-********************************************************************************** */
-listElementHandle_t ListGetPrev(listElementHandle_t element)
-{
- return element->prev;
-}
-
-/*! *********************************************************************************
-* \brief Unlinks an element from its list.
-*
-* \param[in] element - ID of the element to remove.
-*
-* \return gOrphanElement_c if element is not part of any list.
-* gListOk_c if removal was successful.
-*
-* \pre
-*
-* \post
-*
-* \remarks
-*
-********************************************************************************** */
-listStatus_t ListRemoveElement(listElementHandle_t element)
-{
- if(element->list == NULL)
- {
- return gOrphanElement_c; /*Element was previusly removed or never added*/
- }
-
- OSA_EnterCritical(kCriticalDisableInt);
-
- if(element->prev == NULL) /*Element is head or solo*/
- {
- element->list->head = element->next; /*is null if solo*/
- }
- if(element->next == NULL) /*Element is tail or solo*/
- {
- element->list->tail = element->prev; /*is null if solo*/
- }
- if(element->prev != NULL) /*Element is not head*/
- {
- element->prev->next = element->next;
- }
- if(element->next != NULL) /*Element is not tail*/
- {
- element->next->prev = element->prev;
- }
- element->list->size--;
- element->list = NULL;
-
- OSA_ExitCritical(kCriticalDisableInt);
- return gListOk_c;
-}
-
-/*! *********************************************************************************
-* \brief Links an element in the previous position relative to a given member
-* of a list.
-*
-* \param[in] element - ID of a member of a list.
-* newElement - new element to insert before the given member.
-*
-* \return gOrphanElement_c if element is not part of any list.
-* gListFull_c if list is full.
-* gListOk_c if insertion was successful.
-*
-* \pre
-*
-* \post
-*
-* \remarks
-*
-********************************************************************************** */
-listStatus_t ListAddPrevElement(listElementHandle_t element, listElementHandle_t newElement)
-{
- if(element->list == NULL)
- {
- return gOrphanElement_c; /*Element was previusly removed or never added*/
- }
- OSA_EnterCritical(kCriticalDisableInt);
-
- if( (element->list->max != 0) && (element->list->max == element->list->size) )
- {
- OSA_ExitCritical(kCriticalDisableInt);
- return gListFull_c;
- }
-
- if(element->prev == NULL) /*Element is list head*/
- {
- element->list->head = newElement;
- }
- else
- {
- element->prev->next = newElement;
- }
- newElement->list = element->list;
- element->list->size++;
- newElement->next = element;
- newElement->prev = element->prev;
- element->prev = newElement;
-
- OSA_ExitCritical(kCriticalDisableInt);
- return gListOk_c;
-}
-
-/*! *********************************************************************************
-* \brief Gets the current size of a list.
-*
-* \param[in] list - ID of the list.
-*
-* \return Current size of the list.
-*
-* \pre
-*
-* \post
-*
-* \remarks
-*
-********************************************************************************** */
-uint32_t ListGetSize(listHandle_t list)
-{
- return list->size;
-}
-
-/*! *********************************************************************************
-* \brief Gets the number of free places in the list.
-*
-* \param[in] list - ID of the list.
-*
-* \return Available size of the list.
-*
-* \pre
-*
-* \post
-*
-* \remarks
-*
-********************************************************************************** */
-uint32_t ListGetAvailable(listHandle_t list)
-{
- return (list->max - list->size);
-}
-
-/*! *********************************************************************************
-* \brief Creates, tests and deletes a list. Any error that occurs will trap the
-* CPU in a while(1) loop.
-*
-* \param[in] void.
-*
-* \return gListOk_c.
-*
-* \pre
-*
-* \post
-*
-* \remarks
-*
-********************************************************************************** */
-// To be removed or rewritten to remove MemManager dependency.
-#if 0
-listStatus_t ListTest()
-{
- listHandle_t list;
- listElementHandle_t element, newElement;
- uint32_t i,freeBlocks;
- const uint32_t max = 10;
-
- freeBlocks = MEM_GetAvailableFwkBlocks(0);
- /*create list*/
- list = ListCreate(max);
- LIST_ASSERT(list != NULL);
-
- /*add elements*/
- for(i=0; i<max; i++)
- {
- element = (listElementHandle_t)MEM_BufferFwkAlloc(sizeof(listElement_t));
- LIST_ASSERT(element != NULL);
- LIST_ASSERT(ListAddHead(list, element) == gListOk_c);
- LIST_ASSERT(list->head == element)
- ListRemoveHead(list);
- LIST_ASSERT(ListAddTail(list, element) == gListOk_c);
- LIST_ASSERT(list->tail == element);
- if(ListGetSize(list) == 1)
- {
- LIST_ASSERT(list->head == element);
- }
- else
- {
- LIST_ASSERT(list->head != element);
- }
- }
- LIST_ASSERT(ListGetSize(list) == max);
-
- /*add one more element*/
- element = (listElementHandle_t)MEM_BufferFwkAlloc(sizeof(listElement_t));
- LIST_ASSERT(element != NULL);
- LIST_ASSERT(ListAddTail(list, element) == gListFull_c);
- list->max = 0;
- LIST_ASSERT(ListAddTail(list, element) == gListOk_c);
- LIST_ASSERT(ListGetSize(list) == max+1);
- /*remove the extra element*/
- element = ListRemoveHead(list);
- LIST_ASSERT(element != NULL);
- LIST_ASSERT(ListGetSize(list) == max);
- LIST_ASSERT(MEM_BufferFree(element) == MEM_SUCCESS_c);
- list->max = max;
-
- /*parse elements*/
- element = ListGetHead(list);
- LIST_ASSERT(element != NULL);
- for(i=0; i<(max-1); i++)
- {
- element = ListGetNext(element);
- LIST_ASSERT(element != NULL);
- }
- LIST_ASSERT(element == list->tail);
- LIST_ASSERT(ListGetNext(element) == NULL);
-
- /*Reverse parse elements*/
- for(i=0; i<(max-1); i++)
- {
- element = ListGetPrev(element);
- LIST_ASSERT(element != NULL);
- }
- LIST_ASSERT(element == list->head);
- LIST_ASSERT(ListGetPrev(element) == NULL);
-
- /*Add prev*/
- element = ListGetHead(list);
- LIST_ASSERT(element != NULL);
- newElement = (listElementHandle_t)MEM_BufferFwkAlloc(sizeof(listElement_t));
- LIST_ASSERT(newElement != NULL);
- LIST_ASSERT(ListAddPrevElement(element, newElement) == gListFull_c);
- LIST_ASSERT(ListGetHead(list) == element);
- list->max = 0;
- LIST_ASSERT(ListAddPrevElement(element, newElement) == gListOk_c);
- LIST_ASSERT(ListGetHead(list) == newElement);
- newElement = (listElementHandle_t)MEM_BufferFwkAlloc(sizeof(listElement_t));
- LIST_ASSERT(newElement != NULL);
- element = list->head->next->next;
- LIST_ASSERT(ListAddPrevElement(element, newElement) == gListOk_c);
- LIST_ASSERT(list->head->next->next == newElement);
- newElement = (listElementHandle_t)MEM_BufferFwkAlloc(sizeof(listElement_t));
- LIST_ASSERT(newElement != NULL);
- element = list->tail;
- LIST_ASSERT(ListAddPrevElement(element, newElement) == gListOk_c);
- LIST_ASSERT(list->tail->prev == newElement);
- newElement = (listElementHandle_t)MEM_BufferFwkAlloc(sizeof(listElement_t));
- LIST_ASSERT(newElement != NULL);
- element = (listElementHandle_t)MEM_BufferFwkAlloc(sizeof(listElement_t));
- LIST_ASSERT(element != NULL);
- element->list = NULL;
- LIST_ASSERT(ListAddPrevElement(element, newElement) == gOrphanElement_c);
- MEM_BufferFree(newElement);
- MEM_BufferFree(element);
- LIST_ASSERT(ListGetSize(list) == max+3);
-
- /*Remove element*/
- element = ListGetHead(list);
- LIST_ASSERT(element == list->head);
- LIST_ASSERT(ListRemoveElement(element) == gListOk_c);
- LIST_ASSERT(list->head != element);
- LIST_ASSERT(ListRemoveElement(element) == gOrphanElement_c);
- MEM_BufferFree(element);
- element = ListGetHead(list)->next->next;
- LIST_ASSERT(ListRemoveElement(element) == gListOk_c);
- MEM_BufferFree(element);
- element = list->tail;
- LIST_ASSERT(ListRemoveElement(element) == gListOk_c);
- LIST_ASSERT(list->tail != element);
- MEM_BufferFree(element);
- LIST_ASSERT(ListGetSize(list) == max);
- list->max = max;
-
- for(i=0; i<(max-1); i++)
- {
- element = ListRemoveHead(list);
- LIST_ASSERT(element != NULL);
- MEM_BufferFree(element);
- }
- element = ListGetHead(list);
- LIST_ASSERT(element != NULL);
- LIST_ASSERT(ListRemoveElement(element) == gListOk_c);
- LIST_ASSERT(list->head == NULL);
- LIST_ASSERT(list->tail == NULL);
- LIST_ASSERT(element->list == NULL);
- MEM_BufferFree(element);
-
- /*List is empty here.*/
- LIST_ASSERT(ListGetSize(list) == 0);
- element = ListRemoveHead(list);
- LIST_ASSERT(element == NULL);
- element = ListGetHead(list);
- LIST_ASSERT(element == NULL);
-
- MEM_BufferFree(list);
- /*Did we produce a memory leak?*/
- LIST_ASSERT(freeBlocks == MEM_GetAvailableFwkBlocks(0));
-
- return gListOk_c;
-}
-#else
-listStatus_t ListTest()
-{
- return gListOk_c;
-}
-#endif
--- a/FSL_CONN_FWK/Utils/GenericList/GenericList.h Fri Jul 31 13:49:46 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,110 +0,0 @@
-/*!
-* Copyright (c) 2015, Freescale Semiconductor, Inc.
-* All rights reserved.
-*
-* \file GenericList.h
-* This is the header file for the linked lists part of the Utils package.
-*
-* Redistribution and use in source and binary forms, with or without modification,
-* are permitted provided that the following conditions are met:
-*
-* o Redistributions of source code must retain the above copyright notice, this list
-* of conditions and the following disclaimer.
-*
-* o Redistributions in binary form must reproduce the above copyright notice, this
-* list of conditions and the following disclaimer in the documentation and/or
-* other materials provided with the distribution.
-*
-* o Neither the name of Freescale Semiconductor, Inc. nor the names of its
-* contributors may be used to endorse or promote products derived from this
-* software without specific prior written permission.
-*
-* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
-* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
-* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-*/
-
-#ifndef _GENERIC_LIST_H_
-#define _GENERIC_LIST_H_
-
-
-/*! *********************************************************************************
-*************************************************************************************
-* Include
-*************************************************************************************
-********************************************************************************** */
-
-#include "EmbeddedTypes.h"
-
-/*! *********************************************************************************
-*************************************************************************************
-* Public macro definitions
-*************************************************************************************
-********************************************************************************** */
-
-/*! *********************************************************************************
-*************************************************************************************
-* Public type definitions
-*************************************************************************************
-********************************************************************************** */
-typedef enum
-{
- gListOk_c = 0,
- gListFull_c,
- gListEmpty_c,
- gOrphanElement_c
-}listStatus_t;
-
-typedef struct list_tag
-{
- struct listElement_tag *head;
- struct listElement_tag *tail;
- uint16_t size;
- uint16_t max;
-}list_t, *listHandle_t;
-
-typedef struct listElement_tag
-{
- struct listElement_tag *next;
- struct listElement_tag *prev;
- struct list_tag *list;
-}listElement_t, *listElementHandle_t;
-
-/*! *********************************************************************************
-*************************************************************************************
-* Public prototypes
-*************************************************************************************
-********************************************************************************** */
-void ListInit(listHandle_t list, uint32_t max);
-listHandle_t ListGetList(listElementHandle_t element);
-listStatus_t ListAddHead(listHandle_t list, listElementHandle_t element);
-listStatus_t ListAddTail(listHandle_t list, listElementHandle_t element);
-listElementHandle_t ListRemoveHead(listHandle_t list);
-listElementHandle_t ListGetHead(listHandle_t list);
-listElementHandle_t ListGetNext(listElementHandle_t element);
-listElementHandle_t ListGetPrev(listElementHandle_t element);
-listStatus_t ListRemoveElement(listElementHandle_t element);
-listStatus_t ListAddPrevElement(listElementHandle_t element, listElementHandle_t newElement);
-uint32_t ListGetSize(listHandle_t list);
-uint32_t ListGetAvailable(listHandle_t list);
-listStatus_t ListTest(void);
-
-/*! *********************************************************************************
-*************************************************************************************
-* Private macros
-*************************************************************************************
-********************************************************************************** */
-#ifdef DEBUG_ASSERT
-#define LIST_ASSERT(condition) if(!(condition))while(1);
-#else
-#define LIST_ASSERT(condition) (void)(condition);
-#endif
-
-#endif /*_GENERIC_LIST_H_*/
\ No newline at end of file
--- a/FSL_CONN_FWK/mbedAbstraction/mbedAbstraction.h Fri Jul 31 13:49:46 2015 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,15 +0,0 @@ -#ifndef __MBED_ABSTRACTION_H__ -#define __MBED_ABSTRACTION_H__ - - -#ifdef __ICCARM__ -#define OSA_EnterCritical(kCriticalDisableInt) __disable_interrupt() -#define OSA_ExitCritical(kCriticalDisableInt) __enable_interrupt() -#else -#define OSA_EnterCritical(kCriticalDisableInt) __disable_irq() -#define OSA_ExitCritical(kCriticalDisableInt) __enable_irq() -#endif - - - -#endif
--- a/FSL_IEEE_802_15_4/PHY/ASP.c Fri Jul 31 13:49:46 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,951 +0,0 @@
-/*!
-* Copyright (c) 2015, Freescale Semiconductor, Inc.
-* All rights reserved.
-*
-* \file ASP.c
-* This is the source file for the ASP module.
-*
-* Redistribution and use in source and binary forms, with or without modification,
-* are permitted provided that the following conditions are met:
-*
-* o Redistributions of source code must retain the above copyright notice, this list
-* of conditions and the following disclaimer.
-*
-* o Redistributions in binary form must reproduce the above copyright notice, this
-* list of conditions and the following disclaimer in the documentation and/or
-* other materials provided with the distribution.
-*
-* o Neither the name of Freescale Semiconductor, Inc. nor the names of its
-* contributors may be used to endorse or promote products derived from this
-* software without specific prior written permission.
-*
-* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
-* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
-* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-*/
-
-/************************************************************************************
-*************************************************************************************
-* Include
-*************************************************************************************
-************************************************************************************/
-
-#include "EmbeddedTypes.h"
-//#include "fsl_os_abstraction.h"
-
-#include "Phy.h"
-#include "PhyInterface.h"
-#include "MpmInterface.h"
-#include "AspInterface.h"
-
-#if 0
-#include "MemManager.h"
-#include "FunctionLib.h"
-#include "Panic.h"
-#endif
-
-#include "MCR20Drv.h"
-#include "MCR20Reg.h"
-
-#if gFsciIncluded_c
-#include "FsciInterface.h"
-#include "FsciCommands.h"
-#include "FsciCommunication.h"
-#endif
-
-#define gSmacSupported (1)
-
-#ifdef gSmacSupported
-#include "SMAC_Interface.h"
-#endif
-#if gAspCapability_d
-
-/************************************************************************************
-*************************************************************************************
-* Public macros
-*************************************************************************************
-************************************************************************************/
-#define mFAD_THR_ResetValue 0x82
-#define mANT_AGC_CTRL_ResetValue 0x40
-
-/************************************************************************************
-*************************************************************************************
-* Public type definitions
-*************************************************************************************
-************************************************************************************/
-//MCR20 DTS modes
-enum {
- gDtsNormal_c,
- gDtsTxOne_c,
- gDtsTxZero_c,
- gDtsTx2Mhz_c,
- gDtsTx200Khz_c,
- gDtsTx1MbpsPRBS9_c,
- gDtsTxExternalSrc_c,
- gDtsTxRandomSeq_c
-};
-
-/************************************************************************************
-*************************************************************************************
-* Private functions prototype
-*************************************************************************************
-************************************************************************************/
-phyStatus_t AspSetDtsMode( uint8_t mode );
-phyStatus_t AspEnableBER( void );
-void AspDisableBER( void );
-
-#if gFsciIncluded_c
-static void fsciAspReqHandler(void *pData, void* param, uint32_t interfaceId);
-static void AspSapMonitor(void *pData, void* param, uint32_t interfaceId);
-#endif
-
-/************************************************************************************
-*************************************************************************************
-* Private memory declarations
-*************************************************************************************
-************************************************************************************/
-//2405 2410 2415 2420 2425 2430 2435 2440 2445 2450 2455 2460 2465 2470 2475 2480
-static const uint16_t asp_pll_frac[16] = {0x2400, 0x4C00, 0x7400, 0x9C00, 0xC400, 0xEC00, 0x1400, 0x3C00, 0x6400, 0x8C00, 0xB400, 0xDC00, 0x0400, 0x2C00, 0x5400, 0x7C00};
-
-#if gFsciIncluded_c
-static uint8_t mAspFsciBinding[gPhyInstancesCnt_c];
-#endif
-
-/************************************************************************************
-*************************************************************************************
-* Public functions
-*************************************************************************************
-************************************************************************************/
-
-/*! *********************************************************************************
-* \brief Initialize the ASP module
-*
-* \param[in] phyInstance The instance of the PHY
-* \param[in] interfaceId The Serial Manager interface used
-*
-********************************************************************************** */
-#undef mFuncId_c
-#define mFuncId_c 0
-void ASP_Init( instanceId_t phyInstance, uint8_t interfaceId )
-{
-#if gFsciIncluded_c
- if( phyInstance < gPhyInstancesCnt_c )
- {
- mAspFsciBinding[phyInstance] = interfaceId;
- FSCI_RegisterOpGroup( gFSCI_AppAspOpcodeGroup_c, gFsciMonitorMode_c, fsciAspReqHandler, NULL, gAspInterfaceId);
- FSCI_RegisterOpGroup( gFSCI_AspSapId_c, gFsciMonitorMode_c, AspSapMonitor, NULL, gAspInterfaceId);
- }
-#endif
-}
-
-/*! *********************************************************************************
-* \brief ASP SAP handler.
-*
-* \param[in] pMsg Pointer to the request message
-* \param[in] instanceId The instance of the PHY
-*
-* \return AspStatus_t
-*
-********************************************************************************** */
-#undef mFuncId_c
-#define mFuncId_c 1
-AspStatus_t APP_ASP_SapHandler(AppToAspMessage_t *pMsg, instanceId_t instanceId)
-{
- AspStatus_t status = gAspSuccess_c;
-#if gFsciIncluded_c
- FSCI_Monitor( gFSCI_AspSapId_c,
- pMsg,
- NULL,
- gAspInterfaceId );
-#endif
- switch( pMsg->msgType )
- {
- case aspMsgTypeGetTimeReq_c:
- Asp_GetTimeReq((uint32_t*)&pMsg->msgData.aspGetTimeReq.time);
- break;
- case aspMsgTypeXcvrWriteReq_c:
- status = Asp_XcvrWriteReq( pMsg->msgData.aspXcvrData.mode,
- pMsg->msgData.aspXcvrData.addr,
- pMsg->msgData.aspXcvrData.len,
- pMsg->msgData.aspXcvrData.data);
- break;
- case aspMsgTypeXcvrReadReq_c:
- status = Asp_XcvrReadReq( pMsg->msgData.aspXcvrData.mode,
- pMsg->msgData.aspXcvrData.addr,
- pMsg->msgData.aspXcvrData.len,
- pMsg->msgData.aspXcvrData.data);
- break;
- case aspMsgTypeSetFADState_c:
- status = Asp_SetFADState(pMsg->msgData.aspFADState);
- break;
- case aspMsgTypeSetFADThreshold_c:
- status = Asp_SetFADThreshold(pMsg->msgData.aspFADThreshold);
- break;
- case aspMsgTypeSetANTXState_c:
- status = Asp_SetANTXState(pMsg->msgData.aspANTXState);
- break;
- case aspMsgTypeGetANTXState_c:
- *((uint8_t*)&status) = Asp_GetANTXState();
- break;
- case aspMsgTypeSetPowerLevel_c:
- status = Asp_SetPowerLevel(pMsg->msgData.aspSetPowerLevelReq.powerLevel);
- break;
- case aspMsgTypeGetPowerLevel_c:
- *((uint8_t*)&status) = Asp_GetPowerLevel(); //remove compiler warning
- break;
- case aspMsgTypeTelecSetFreq_c:
- status = ASP_TelecSetFreq(pMsg->msgData.aspTelecsetFreq.channel);
- break;
- case aspMsgTypeTelecSendRawData_c:
- status = ASP_TelecSendRawData((uint8_t*)&pMsg->msgData.aspTelecSendRawData);
- break;
- case aspMsgTypeTelecTest_c:
- status = ASP_TelecTest(pMsg->msgData.aspTelecTest.mode);
- break;
- case aspMsgTypeSetLQIMode_c:
- status = Asp_SetLQIMode(pMsg->msgData.aspLQIMode);
- break;
- case aspMsgTypeGetRSSILevel_c:
- *((uint8_t*)&status) = Asp_GetRSSILevel(); //remove compiler warning
- break;
-#if gMpmIncluded_d
- case aspMsgTypeSetMpmConfig_c:
- MPM_SetConfig(&pMsg->msgData.MpmConfig);
- break;
- case aspMsgTypeGetMpmConfig_c:
- MPM_GetConfig(&pMsg->msgData.MpmConfig);
- break;
-#endif
- default:
- status = gAspInvalidRequest_c;// OR gAspInvalidParameter_c
- break;
- }
-#if gFsciIncluded_c
- FSCI_Monitor( gFSCI_AspSapId_c,
- pMsg,
- (void*)&status,
- gAspInterfaceId );
-#endif
- return status;
-}
-
-/*! *********************************************************************************
-* \brief Returns the current PHY time
-*
-* \param[in] time location where the PHY time will be stored
-*
-********************************************************************************** */
-#undef mFuncId_c
-#define mFuncId_c 2
-void Asp_GetTimeReq(uint32_t *time)
-{
- PhyTimeReadClock( time );
-}
-
-/*! *********************************************************************************
-* \brief Write XCVR registers
-*
-* \param[in] mode Direct/Indirect access
-* \param[in] addr XCVR address
-* \param[in] len number of bytes to write
-* \param[in] pData data o be written
-*
-* \return AspStatus_t
-*
-********************************************************************************** */
-#undef mFuncId_c
-#define mFuncId_c 3
-AspStatus_t Asp_XcvrWriteReq (uint8_t mode, uint16_t addr, uint8_t len, uint8_t* pData)
-{
- if (mode)
- MCR20Drv_IndirectAccessSPIMultiByteWrite((uint8_t)addr, pData, len);
- else
- MCR20Drv_DirectAccessSPIMultiByteWrite((uint8_t)addr, pData, len);
-
- return gAspSuccess_c;
-}
-
-/*! *********************************************************************************
-* \brief Read XCVR registers
-*
-* \param[in] mode Direct/Indirect access
-* \param[in] addr XCVR address
-* \param[in] len number of bytes to read
-* \param[in] pData location where data will be stored
-*
-* \return AspStatus_t
-*
-********************************************************************************** */
-#undef mFuncId_c
-#define mFuncId_c 4
-AspStatus_t Asp_XcvrReadReq (uint8_t mode, uint16_t addr, uint8_t len, uint8_t* pData)
-{
- if (mode)
- MCR20Drv_IndirectAccessSPIMultiByteRead((uint8_t)addr, pData, len);
- else
- MCR20Drv_DirectAccessSPIMultiByteRead((uint8_t)addr, pData, len);
-
- return gAspSuccess_c;
-}
-
-/*! *********************************************************************************
-* \brief Set Tx output power level
-*
-* \param[in] powerLevel The new power level: 0x03-0x1F (see documentation for details)
-*
-* \return AspStatus_t
-*
-********************************************************************************** */
-#undef mFuncId_c
-#define mFuncId_c 5
-AspStatus_t Asp_SetPowerLevel( uint8_t powerLevel )
-{
- if(powerLevel > gAspPowerLevel_16dBm)
- return gAspInvalidParameter_c;
-
- {
- uint8_t res;
-
- res = PhyPlmeSetPwrLevelRequest(powerLevel);
-
- if( res == gPhySuccess_c )
- {
- return gAspSuccess_c;
- }
- else
- {
- return gAspDenied_c;
- }
- }
-}
-
-/*! *********************************************************************************
-* \brief Read the current Tx power level
-*
-* \return power level
-*
-********************************************************************************** */
-#undef mFuncId_c
-#define mFuncId_c 6
-uint8_t Asp_GetPowerLevel()
-{
- return MCR20Drv_DirectAccessSPIRead(PA_PWR);
-}
-
-/*! *********************************************************************************
-* \brief Set the state of Active Promiscuous functionality
-*
-* \param[in] state new state
-*
-* \return AspStatus_t
-*
-********************************************************************************** */
-#undef mFuncId_c
-#define mFuncId_c 7
-AspStatus_t Asp_SetActivePromState(bool_t state)
-{
- PhySetActivePromiscuous(state);
- return gAspSuccess_c;
-}
-
-/*! *********************************************************************************
-* \brief Set the state of Fast Antenna Diversity functionality
-*
-* \param[in] state new state
-*
-* \return AspStatus_t
-*
-********************************************************************************** */
-#undef mFuncId_c
-#define mFuncId_c 8
-AspStatus_t Asp_SetFADState(bool_t state)
-{
- if( gPhySuccess_c != PhyPlmeSetFADStateRequest(state) )
- {
- return gAspDenied_c;
- }
- return gAspSuccess_c;
-}
-
-/*! *********************************************************************************
-* \brief Set the Fast Antenna Diversity threshold
-*
-* \param[in] threshold
-*
-* \return AspStatus_t
-*
-********************************************************************************** */
-#undef mFuncId_c
-#define mFuncId_c 9
-AspStatus_t Asp_SetFADThreshold(uint8_t threshold)
-{
- if( gPhySuccess_c != PhyPlmeSetFADThresholdRequest(threshold) )
- {
- return gAspDenied_c;
- }
- return gAspSuccess_c;
-}
-
-/*! *********************************************************************************
-* \brief Set the ANTX functionality
-*
-* \param[in] state
-*
-* \return AspStatus_t
-*
-********************************************************************************** */
-#undef mFuncId_c
-#define mFuncId_c 10
-AspStatus_t Asp_SetANTXState(bool_t state)
-{
- if( gPhySuccess_c != PhyPlmeSetANTXStateRequest(state) )
- {
- return gAspDenied_c;
- }
- return gAspSuccess_c;
-}
-
-/*! *********************************************************************************
-* \brief Get the ANTX functionality
-*
-* \return current state
-*
-********************************************************************************** */
-#undef mFuncId_c
-#define mFuncId_c 11
-uint8_t Asp_GetANTXState(void)
-{
- return PhyPlmeGetANTXStateRequest();
-}
-
-/*! *********************************************************************************
-* \brief Set the ANTX pad state
-*
-* \param[in] antAB_on
-* \param[in] rxtxSwitch_on
-*
-* \return status
-*
-********************************************************************************** */
-#undef mFuncId_c
-#define mFuncId_c 12
-uint8_t Asp_SetANTPadStateRequest(bool_t antAB_on, bool_t rxtxSwitch_on)
-{
- return PhyPlmeSetANTPadStateRequest(antAB_on, rxtxSwitch_on);
-}
-
-/*! *********************************************************************************
-* \brief Set the ANTX pad strength
-*
-* \param[in] hiStrength
-*
-* \return status
-*
-********************************************************************************** */
-#undef mFuncId_c
-#define mFuncId_c 13
-uint8_t Asp_SetANTPadStrengthRequest(bool_t hiStrength)
-{
- return PhyPlmeSetANTPadStrengthRequest(hiStrength);
-}
-
-/*! *********************************************************************************
-* \brief Set the ANTX inverted pads
-*
-* \param[in] invAntA invert Ant_A pad
-* \param[in] invAntB invert Ant_B pad
-* \param[in] invTx invert Tx pad
-* \param[in] invRx invert Rx pad
-*
-* \return status
-*
-********************************************************************************** */
-#undef mFuncId_c
-#define mFuncId_c 14
-uint8_t Asp_SetANTPadInvertedRequest(bool_t invAntA, bool_t invAntB, bool_t invTx, bool_t invRx)
-{
- return PhyPlmeSetANTPadInvertedRequest(invAntA, invAntB, invTx, invRx);
-}
-
-/*! *********************************************************************************
-* \brief Set the LQI mode
-*
-* \param[in] mode
-*
-* \return AspStatus_t
-*
-********************************************************************************** */
-#undef mFuncId_c
-#define mFuncId_c 15
-AspStatus_t Asp_SetLQIMode(bool_t mode)
-{
- if( gPhySuccess_c != PhyPlmeSetLQIModeRequest(mode) )
- {
- return gAspDenied_c;
- }
- return gAspSuccess_c;
-}
-
-/*! *********************************************************************************
-* \brief Get the last RSSI level
-*
-* \return RSSI
-*
-********************************************************************************** */
-#undef mFuncId_c
-#define mFuncId_c 16
-uint8_t Asp_GetRSSILevel(void)
-{
- return PhyPlmeGetRSSILevelRequest();
-}
-
-/*! *********************************************************************************
-* \brief Set current channel
-*
-* \param[in] channel channel number (11-26)
-*
-* \return AspStatus_t
-*
-********************************************************************************** */
-#undef mFuncId_c
-#define mFuncId_c 17
-AspStatus_t ASP_TelecSetFreq(uint8_t channel)
-{
- PhyPlmeForceTrxOffRequest();
- if( gPhySuccess_c != PhyPlmeSetCurrentChannelRequest(channel,0) )
- {
- return gAspInvalidParameter_c;
- }
-
- return gAspSuccess_c;
-}
-
-/*! *********************************************************************************
-* \brief Send a raw data frame OTA
-*
-* \param[in] dataPtr raw data
-*
-* \return AspStatus_t
-*
-********************************************************************************** */
-#undef mFuncId_c
-#define mFuncId_c 18
-AspStatus_t ASP_TelecSendRawData(uint8_t* dataPtr)
-{
- uint8_t phyReg;
-
- dataPtr[0] += 2; /* Add FCS length to PSDU Length*/
-
- // Validate the length
- if(dataPtr[0] > gMaxPHYPacketSize_c)
- return gAspTooLong_c;
-
- //Force Idle
- PhyPlmeForceTrxOffRequest();
- AspSetDtsMode(gDtsNormal_c);
- AspDisableBER();
- // Load the TX PB: load the PSDU Lenght byte but not the FCS bytes
- MCR20Drv_PB_SPIBurstWrite(dataPtr, dataPtr[0] + 1 - 2);
- // Program a Tx sequence
- phyReg = MCR20Drv_DirectAccessSPIRead(PHY_CTRL1);
- phyReg |= gTX_c;
- MCR20Drv_DirectAccessSPIWrite( (uint8_t) PHY_CTRL1, phyReg);
- return gAspSuccess_c;
-}
-
-/*! *********************************************************************************
-* \brief Set Telec test mode
-*
-* \param[in] mode Telec test mode
-*
-* \return AspStatus_t
-*
-********************************************************************************** */
-#undef mFuncId_c
-#define mFuncId_c 19
-AspStatus_t ASP_TelecTest(uint8_t mode)
-{
- uint8_t phyReg;
- static uint8_t aTxContModPattern[2];
- uint8_t channel;
- static bool_t fracSet = FALSE;
-
- // Get current channel number
- channel = PhyPlmeGetCurrentChannelRequest(0);
-
- if( fracSet )
- {
- ASP_TelecSetFreq(channel);
- fracSet = FALSE;
- }
-
- switch( mode )
- {
- case gTestForceIdle_c: //ForceIdle();
-#ifdef gSmacSupported
- MLMEPhySoftReset();
-#else
- PhyPlmeForceTrxOffRequest();
-#endif
- AspSetDtsMode(gDtsNormal_c);
- AspDisableBER();
- break;
-
- case gTestPulseTxPrbs9_c: // Continuously transmit a PRBS9 pattern.
- // PLME_PRBS9_Load (); // Load the TX RAM
- AspSetDtsMode(gDtsTxRandomSeq_c);
- //Enable continuous TX mode
- AspEnableBER();
- // Start Tx packet mode with no interrupt on end
- phyReg = MCR20Drv_DirectAccessSPIRead(PHY_CTRL1);
- phyReg |= gTX_c;
- MCR20Drv_DirectAccessSPIWrite( (uint8_t) PHY_CTRL1, phyReg);
- break;
-
- case gTestContinuousRx_c: // Sets the device into continuous RX mode
- AspSetDtsMode(gDtsNormal_c);
- //Enable continuous RX mode
- AspEnableBER();
- // Set length of data in DUAL_PAN_DWELL register
- MCR20Drv_IndirectAccessSPIWrite(DUAL_PAN_DWELL, 127);
- // Start Rx packet mode with no interrupt on end
- phyReg = MCR20Drv_DirectAccessSPIRead(PHY_CTRL1);
- phyReg |= gRX_c;
- MCR20Drv_DirectAccessSPIWrite( (uint8_t) PHY_CTRL1, phyReg);
- break;
-
- case gTestContinuousTxMod_c: // Sets the device to continuously transmit a 10101010 pattern
- AspSetDtsMode(gDtsNormal_c);
- //Enable continuous TX mode
- AspEnableBER();
- //Prepare TX operation
- aTxContModPattern[0] = 1;
- aTxContModPattern[1] = 0xAA;
- // Load the TX PB
- MCR20Drv_PB_SPIBurstWrite(aTxContModPattern, aTxContModPattern[0] + 1);
- // Program a Tx sequence
- phyReg = MCR20Drv_DirectAccessSPIRead(PHY_CTRL1);
- phyReg |= gTX_c;
- MCR20Drv_DirectAccessSPIWrite( (uint8_t) PHY_CTRL1, phyReg);
- break;
-
- case gTestContinuousTxNoMod_c: // Sets the device to continuously transmit an unmodulated CW
- //Enable unmodulated TX
- AspSetDtsMode(gDtsTxOne_c);
- //Enable continuous TX mode
- AspEnableBER();
- MCR20Drv_DirectAccessSPIMultiByteWrite(PLL_FRAC0_LSB, (uint8_t *) &asp_pll_frac[channel - 11], 2);
- fracSet = TRUE;
- // Program a Tx sequence
- phyReg = MCR20Drv_DirectAccessSPIRead(PHY_CTRL1);
- phyReg |= gTX_c;
- MCR20Drv_DirectAccessSPIWrite( (uint8_t) PHY_CTRL1, phyReg);
- break;
-
- case gTestContinuousTx2Mhz_c:
- AspSetDtsMode(gDtsTx2Mhz_c);
- //Enable continuous TX mode
- AspEnableBER();
- // Program a Tx sequence
- phyReg = MCR20Drv_DirectAccessSPIRead(PHY_CTRL1);
- phyReg |= gTX_c;
- MCR20Drv_DirectAccessSPIWrite( (uint8_t) PHY_CTRL1, phyReg);
- break;
-
- case gTestContinuousTx200Khz_c:
- AspSetDtsMode(gDtsTx200Khz_c);
- //Enable continuous TX mode
- AspEnableBER();
- // Program a Tx sequence
- phyReg = MCR20Drv_DirectAccessSPIRead(PHY_CTRL1);
- phyReg |= gTX_c;
- MCR20Drv_DirectAccessSPIWrite( (uint8_t) PHY_CTRL1, phyReg);
- break;
-
- case gTestContinuousTx1MbpsPRBS9_c:
- AspSetDtsMode(gDtsTx1MbpsPRBS9_c);
- //Enable continuous TX mode
- AspEnableBER();
- // Program a Tx sequence
- phyReg = MCR20Drv_DirectAccessSPIRead(PHY_CTRL1);
- phyReg |= gTX_c;
- MCR20Drv_DirectAccessSPIWrite( (uint8_t) PHY_CTRL1, phyReg);
- break;
-
- case gTestContinuousTxExternalSrc_c:
- AspSetDtsMode(gDtsTxExternalSrc_c);
- //Enable continuous TX mode
- AspEnableBER();
- // Program a Tx sequence
- phyReg = MCR20Drv_DirectAccessSPIRead(PHY_CTRL1);
- phyReg |= gTX_c;
- MCR20Drv_DirectAccessSPIWrite( (uint8_t) PHY_CTRL1, phyReg);
- break;
-
- case gTestContinuousTxNoModZero_c:
- //Enable unmodulated TX
- AspSetDtsMode(gDtsTxZero_c);
- //Enable continuous TX mode
- AspEnableBER();
- // Program a Tx sequence
- phyReg = MCR20Drv_DirectAccessSPIRead(PHY_CTRL1);
- phyReg |= gTX_c;
- MCR20Drv_DirectAccessSPIWrite( (uint8_t) PHY_CTRL1, phyReg);
- break;
-
- case gTestContinuousTxNoModOne_c:
- //Enable unmodulated TX
- AspSetDtsMode(gDtsTxOne_c);
- //Enable continuous TX mode
- AspEnableBER();
- // Program a Tx sequence
- phyReg = MCR20Drv_DirectAccessSPIRead(PHY_CTRL1);
- phyReg |= gTX_c;
- MCR20Drv_DirectAccessSPIWrite( (uint8_t) PHY_CTRL1, phyReg);
- break;
- }
-
- return gAspSuccess_c;
-}
-
-/*! *********************************************************************************
-* \brief Return the instance of the PHY associated with the FSCI interface
-*
-* \param[in] interfaceId FSCI interface
-*
-* \return insance
-*
-********************************************************************************** */
-#if gFsciIncluded_c
-#undef mFuncId_c
-#define mFuncId_c 20
-static uint32_t getPhyInstance( uint32_t interfaceId )
-{
- uint32_t i;
-
- for( i=0; i<gPhyInstancesCnt_c; i++ )
- if( mAspFsciBinding[i] == interfaceId )
- return i;
-
- return 0;
-}
-
-/*! *********************************************************************************
-* \brief Handle ASP requests received from FSCI
-*
-* \param[in] pData monitored message
-* \param[in] param
-* \param[in] interfaceId FSCI interface
-*
-********************************************************************************** */
-#undef mFuncId_c
-#define mFuncId_c 21
-static void fsciAspReqHandler(void *pData, void* param, uint32_t interfaceId)
-{
- clientPacket_t *pClientPacket = ((clientPacket_t*)pData);
- uint8_t *pMsg = pClientPacket->structured.payload;
-
- pMsg -= sizeof(AppAspMsgType_t);
- ((AppToAspMessage_t*)pMsg)->msgType = (AppAspMsgType_t)pClientPacket->structured.header.opCode;
-
- APP_ASP_SapHandler( (AppToAspMessage_t*)pMsg, getPhyInstance( interfaceId ) );
- MEM_BufferFree(pData);
-}
-
-/*! *********************************************************************************
-* \brief Monitor the ASP Requests and Responses
-*
-* \param[in] pData monitored message
-* \param[in] param
-* \param[in] interfaceId FSCI interface
-*
-* \return AspStatus_t
-*
-********************************************************************************** */
-#undef mFuncId_c
-#define mFuncId_c 22
-static void AspSapMonitor(void *pData, void* param, uint32_t interfaceId)
-{
- clientPacket_t *pFsciPacket = MEM_BufferAlloc( sizeof(clientPacket_t) );
- AppToAspMessage_t *pReq = (AppToAspMessage_t*)pData;
- uint8_t *p;
-
- if( NULL == pFsciPacket )
- {
- FSCI_Error( gFsciOutOfMessages_c, interfaceId );
- return;
- }
-
- p = pFsciPacket->structured.payload;
-
- if( NULL == param ) // Requests
- {
- pFsciPacket->structured.header.opGroup = gFSCI_AppAspOpcodeGroup_c;
- pFsciPacket->structured.header.opCode = pReq->msgType;
-
- switch( pReq->msgType )
- {
- case aspMsgTypeGetTimeReq_c:
- break;
- case aspMsgTypeXcvrWriteReq_c:
- case aspMsgTypeXcvrReadReq_c:
- *p++ = pReq->msgData.aspXcvrData.mode;
- *((uint16_t*)p) = pReq->msgData.aspXcvrData.addr;
- p += sizeof(uint16_t);
- *p++ = pReq->msgData.aspXcvrData.len;
- if( pReq->msgType == aspMsgTypeXcvrWriteReq_c )
- {
- FLib_MemCpy( p, pReq->msgData.aspXcvrData.data,
- pReq->msgData.aspXcvrData.len );
- p += pReq->msgData.aspXcvrData.len;
- }
- break;
- case aspMsgTypeSetFADState_c:
- FLib_MemCpy( p, &pReq->msgData.aspFADState, sizeof(pReq->msgData.aspFADState) );
- p += sizeof(pReq->msgData.aspFADState);
- break;
- case aspMsgTypeSetFADThreshold_c:
- FLib_MemCpy( p, &pReq->msgData.aspFADThreshold, sizeof(pReq->msgData.aspFADThreshold) );
- p += sizeof(pReq->msgData.aspFADThreshold);
- break;
- case aspMsgTypeSetANTXState_c:
- FLib_MemCpy( p, &pReq->msgData.aspANTXState, sizeof(pReq->msgData.aspANTXState) );
- p += sizeof(pReq->msgData.aspANTXState);
- break;
- case aspMsgTypeGetANTXState_c:
- /* Nothing to do here */
- break;
-
- case aspMsgTypeSetPowerLevel_c:
- FLib_MemCpy( p, &pReq->msgData.aspSetPowerLevelReq, sizeof(pReq->msgData.aspSetPowerLevelReq) );
- p += sizeof(pReq->msgData.aspSetPowerLevelReq);
- break;
- case aspMsgTypeGetPowerLevel_c:
- /* Nothing to do here */
- break;
- case aspMsgTypeTelecSetFreq_c:
- FLib_MemCpy( p, &pReq->msgData.aspTelecsetFreq, sizeof(pReq->msgData.aspTelecsetFreq) );
- p += sizeof(pReq->msgData.aspTelecsetFreq);
- break;
- case aspMsgTypeTelecSendRawData_c:
- FLib_MemCpy( p, &pReq->msgData.aspTelecSendRawData, sizeof(pReq->msgData.aspTelecSendRawData) );
- p += sizeof(pReq->msgData.aspTelecSendRawData);
- break;
- case aspMsgTypeTelecTest_c:
- FLib_MemCpy( p, &pReq->msgData.aspTelecTest, sizeof(pReq->msgData.aspTelecTest) );
- p += sizeof(pReq->msgData.aspTelecTest);
- break;
- case aspMsgTypeSetLQIMode_c:
- FLib_MemCpy(p, &pReq->msgData.aspLQIMode, sizeof(pReq->msgData.aspLQIMode) );
- p += sizeof(pReq->msgData.aspLQIMode);
- break;
- case aspMsgTypeGetRSSILevel_c:
- /* Nothing to do here */
- break;
- }
- }
- else // Confirms / Indications
- {
- pFsciPacket->structured.header.opGroup = gFSCI_AspAppOpcodeGroup_c;
- pFsciPacket->structured.header.opCode = pReq->msgType;
-
- *p++ = *((uint8_t*)param);/* copy status */
-
- switch( pReq->msgType )
- {
- case aspMsgTypeGetTimeReq_c:
- FLib_MemCpy( p, &pReq->msgData.aspGetTimeReq.time , sizeof(aspEventReq_t) );
- p += sizeof(aspEventReq_t);
- break;
- case aspMsgTypeGetMpmConfig_c:
- FLib_MemCpy( p, &pReq->msgData.MpmConfig , sizeof(mpmConfig_t) );
- p += sizeof(mpmConfig_t);
- break;
- case aspMsgTypeXcvrReadReq_c:
- *p++ = pReq->msgData.aspXcvrData.len; /* copy length */
- FLib_MemCpy( p, pReq->msgData.aspXcvrData.data, pReq->msgData.aspXcvrData.len );
- p += pReq->msgData.aspXcvrData.len;
- break;
- }
-
- }
-
- /* Send data over the serial interface */
- pFsciPacket->structured.header.len = (fsciLen_t)(p - pFsciPacket->structured.payload);
-
- if ( pFsciPacket->structured.header.len )
- FSCI_transmitFormatedPacket( pFsciPacket, interfaceId );
- else
- MEM_BufferFree( pFsciPacket );
-}
-
-#endif /* gFsciIncluded_c */
-
-
- /*! *********************************************************************************
-* \brief Set the Tx data source selector
-*
-* \param[in] mode
-*
-* \return AspStatus_t
-*
-********************************************************************************** */
-phyStatus_t AspSetDtsMode(uint8_t mode)
-{
- uint8_t phyReg;
-
- phyReg = MCR20Drv_IndirectAccessSPIRead(TX_MODE_CTRL);
- phyReg &= ~cTX_MODE_CTRL_DTS_MASK; // Clear DTS_MODE
- phyReg |= mode; // Set new DTS_MODE
- MCR20Drv_IndirectAccessSPIWrite(TX_MODE_CTRL, phyReg);
-
- return gPhySuccess_c;
-}
-
-/*! *********************************************************************************
-* \brief Enable XCVR test mode
-*
-* \return AspStatus_t
-*
-********************************************************************************** */
-phyStatus_t AspEnableBER()
-{
- uint8_t phyReg;
-
- phyReg = MCR20Drv_IndirectAccessSPIRead(DTM_CTRL1);
- phyReg |= cDTM_CTRL1_DTM_EN;
- MCR20Drv_IndirectAccessSPIWrite(DTM_CTRL1, phyReg);
-
- phyReg = MCR20Drv_IndirectAccessSPIRead(TESTMODE_CTRL);
- phyReg |= cTEST_MODE_CTRL_CONTINUOUS_EN | cTEST_MODE_CTRL_IDEAL_PFC_EN;
- MCR20Drv_IndirectAccessSPIWrite(TESTMODE_CTRL, phyReg);
-
- return gPhySuccess_c;
-}
-
-/*! *********************************************************************************
-* \brief Disable XCVR test mode
-*
-********************************************************************************** */
-void AspDisableBER()
-{
- uint8_t phyReg;
-
- phyReg = MCR20Drv_IndirectAccessSPIRead(DTM_CTRL1);
- phyReg &= ~cDTM_CTRL1_DTM_EN;
- MCR20Drv_IndirectAccessSPIWrite(DTM_CTRL1, phyReg);
-
- phyReg = MCR20Drv_IndirectAccessSPIRead(TESTMODE_CTRL);
- phyReg &= ~(cTEST_MODE_CTRL_CONTINUOUS_EN | cTEST_MODE_CTRL_IDEAL_PFC_EN);
- MCR20Drv_IndirectAccessSPIWrite(TESTMODE_CTRL, phyReg);
-}
-
-
-#endif /* gAspCapability_d */
--- a/FSL_IEEE_802_15_4/PHY/AspInterface.h Fri Jul 31 13:49:46 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,358 +0,0 @@
-/*!
-* Copyright (c) 2015, Freescale Semiconductor, Inc.
-* All rights reserved.
-*
-* \file ASP.h
-* This is a header file for the ASP module.
-*
-* Redistribution and use in source and binary forms, with or without modification,
-* are permitted provided that the following conditions are met:
-*
-* o Redistributions of source code must retain the above copyright notice, this list
-* of conditions and the following disclaimer.
-*
-* o Redistributions in binary form must reproduce the above copyright notice, this
-* list of conditions and the following disclaimer in the documentation and/or
-* other materials provided with the distribution.
-*
-* o Neither the name of Freescale Semiconductor, Inc. nor the names of its
-* contributors may be used to endorse or promote products derived from this
-* software without specific prior written permission.
-*
-* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
-* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
-* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-*/
-
-#ifndef __ASP_H__
-#define __ASP_H__
-
-/************************************************************************************
-*************************************************************************************
-* Include
-*************************************************************************************
-************************************************************************************/
-
-#include "EmbeddedTypes.h"
-//#include "fsl_os_abstraction.h"
-#include "PhyInterface.h"
-#include "MpmInterface.h"
-
-/************************************************************************************
-*************************************************************************************
-* Public macros
-*************************************************************************************
-************************************************************************************/
-/* Enable/Disable the ASP module */
-#ifndef gAspCapability_d
-#ifndef gPHY_802_15_4g_d
-#define gAspCapability_d (1)
-#else
-#define gAspCapability_d (0)
-#endif // gPHY_802_15_4g_d
-#endif // gAspCapability_d
-
-#define gAspInterfaceId (0)
-
-/* Allowed ASP Power Levels */
-#define gAspPowerLevel_m40dBm_c (uint8_t)gAspPowerLevel_m40dBm
-#define gAspPowerLevel_m38dBm_c (uint8_t)gAspPowerLevel_m38dBm
-#define gAspPowerLevel_m36dBm_c (uint8_t)gAspPowerLevel_m36dBm
-#define gAspPowerLevel_m34dBm_c (uint8_t)gAspPowerLevel_m34dBm
-#define gAspPowerLevel_m32dBm_c (uint8_t)gAspPowerLevel_m32dBm
-#define gAspPowerLevel_m30dBm_c (uint8_t)gAspPowerLevel_m30dBm
-#define gAspPowerLevel_m28dBm_c (uint8_t)gAspPowerLevel_m28dBm
-#define gAspPowerLevel_m26dBm_c (uint8_t)gAspPowerLevel_m26dBm
-#define gAspPowerLevel_m24dBm_c (uint8_t)gAspPowerLevel_m24dBm
-#define gAspPowerLevel_m22dBm_c (uint8_t)gAspPowerLevel_m22dBm
-#define gAspPowerLevel_m20dBm_c (uint8_t)gAspPowerLevel_m20dBm
-#define gAspPowerLevel_m18dBm_c (uint8_t)gAspPowerLevel_m18dBm
-#define gAspPowerLevel_m16dBm_c (uint8_t)gAspPowerLevel_m16dBm
-#define gAspPowerLevel_m14dBm_c (uint8_t)gAspPowerLevel_m14dBm
-#define gAspPowerLevel_m12dBm_c (uint8_t)gAspPowerLevel_m12dBm
-#define gAspPowerLevel_m10dBm_c (uint8_t)gAspPowerLevel_m10dBm
-#define gAspPowerLevel_m8dBm_c (uint8_t)gAspPowerLevel_m8dBm
-#define gAspPowerLevel_m6dBm_c (uint8_t)gAspPowerLevel_m6dBm
-#define gAspPowerLevel_m4dBm_c (uint8_t)gAspPowerLevel_m4dBm
-#define gAspPowerLevel_m2dBm_c (uint8_t)gAspPowerLevel_m2dBm
-#define gAspPowerLevel_0dBm_c (uint8_t)gAspPowerLevel_0dBm
-#define gAspPowerLevel_2dBm_c (uint8_t)gAspPowerLevel_2dBm
-#define gAspPowerLevel_4dBm_c (uint8_t)gAspPowerLevel_4dBm
-#define gAspPowerLevel_6dBm_c (uint8_t)gAspPowerLevel_6dBm
-#define gAspPowerLevel_8dBm_c (uint8_t)gAspPowerLevel_8dBm
-#define gAspPowerLevel_10dBm_c (uint8_t)gAspPowerLevel_10dBm
-#define gAspPowerLevel_12dBm_c (uint8_t)gAspPowerLevel_12dBm
-#define gAspPowerLevel_14dBm_c (uint8_t)gAspPowerLevel_14dBm
-#define gAspPowerLevel_16dBm_c (uint8_t)gAspPowerLevel_16dBm
-
-/* OpGroup codes used with FSCI */
-#define gFSCI_AspAppOpcodeGroup_c 0x94 /* ASP_APP_SapHandler */
-#define gFSCI_AppAspOpcodeGroup_c 0x95 /* APP_ASP_SapHandler */
-
-/************************************************************************************
-*************************************************************************************
-* Public type definitions
-*************************************************************************************
-************************************************************************************/
-/* ASP status messages */
-typedef enum{
- gAspSuccess_c = 0x00,
- gAspInvalidRequest_c = 0xC2,
- gAspDenied_c = 0xE2,
- gAspTooLong_c = 0xE5,
- gAspInvalidParameter_c = 0xE8
-}AspStatus_t;
-
-/* Supported Power Levels */
-enum {
- gAspPowerLevel_m40dBm = 0x03,
- gAspPowerLevel_m38dBm = 0x04,
- gAspPowerLevel_m36dBm = 0x05,
- gAspPowerLevel_m34dBm = 0x06,
- gAspPowerLevel_m32dBm = 0x07,
- gAspPowerLevel_m30dBm = 0x08,
- gAspPowerLevel_m28dBm = 0x09,
- gAspPowerLevel_m26dBm = 0x0A,
- gAspPowerLevel_m24dBm = 0x0B,
- gAspPowerLevel_m22dBm = 0x0C,
- gAspPowerLevel_m20dBm = 0x0D,
- gAspPowerLevel_m18dBm = 0x0E,
- gAspPowerLevel_m16dBm = 0x0F,
- gAspPowerLevel_m14dBm = 0x10,
- gAspPowerLevel_m12dBm = 0x11,
- gAspPowerLevel_m10dBm = 0x12,
- gAspPowerLevel_m8dBm = 0x13,
- gAspPowerLevel_m6dBm = 0x14,
- gAspPowerLevel_m4dBm = 0x15,
- gAspPowerLevel_m2dBm = 0x16,
- gAspPowerLevel_0dBm = 0x17,
- gAspPowerLevel_2dBm = 0x18,
- gAspPowerLevel_4dBm = 0x19,
- gAspPowerLevel_6dBm = 0x1A,
- gAspPowerLevel_8dBm = 0x1B,
- gAspPowerLevel_10dBm = 0x1C,
- gAspPowerLevel_12dBm = 0x1D,
- gAspPowerLevel_14dBm = 0x1E,
- gAspPowerLevel_16dBm = 0x1F
-};
-
-/* Radio test modes */
-enum {
- gTestForceIdle_c = 0,
- gTestPulseTxPrbs9_c = 1,
- gTestContinuousRx_c = 2,
- gTestContinuousTxMod_c = 3,
- gTestContinuousTxNoMod_c = 4,
- gTestContinuousTx2Mhz_c = 5,
- gTestContinuousTx200Khz_c = 6,
- gTestContinuousTx1MbpsPRBS9_c = 7,
- gTestContinuousTxExternalSrc_c = 8,
- gTestContinuousTxNoModZero_c = 9,
- gTestContinuousTxNoModOne_c = 10
-};
-
-/* This enum matches with the FSCI OpCode used by ASP*/
-typedef enum {
- aspMsgTypeGetTimeReq_c = 0x00,
- aspMsgTypeGetInactiveTimeReq_c = 0x01,
- aspMsgTypeGetMacStateReq_c = 0x02,
- aspMsgTypeDozeReq_c = 0x03,
- aspMsgTypeAutoDozeReq_c = 0x04,
- aspMsgTypeAcomaReq_c = 0x05,
- aspMsgTypeHibernateReq_c = 0x06,
- aspMsgTypeWakeReq_c = 0x07,
- aspMsgTypeEventReq_c = 0x08,
- aspMsgTypeClkoReq_c = 0x09,
- aspMsgTypeTrimReq_c = 0x0A,
- aspMsgTypeDdrReq_c = 0x0B,
- aspMsgTypePortReq_c = 0x0C,
- aspMsgTypeSetMinDozeTimeReq_c = 0x0D,
- aspMsgTypeSetNotifyReq_c = 0x0E,
- aspMsgTypeSetPowerLevel_c = 0x0F,
- aspMsgTypeGetPowerLevel_c = 0x1F,
- aspMsgTypeTelecTest_c = 0x10,
- aspMsgTypeTelecSetFreq_c = 0x11,
- aspMsgTypeGetInactiveTimeCnf_c = 0x12,
- aspMsgTypeGetMacStateCnf_c = 0x13,
- aspMsgTypeDozeCnf_c = 0x14,
- aspMsgTypeAutoDozeCnf_c = 0x15,
- aspMsgTypeTelecSendRawData_c = 0x16,
- aspMsgTypeSetFADState_c = 0x17,
- aspMsgTypeSetFADThreshold_c = 0x18,
- aspMsgTypeGetFADThreshold_c = 0x19,
- aspMsgTypeGetFADState_c = 0x1A,
- aspMsgTypeSetActivePromState_c = 0x1B,
- aspMsgTypeXcvrWriteReq_c = 0x1C,
- aspMsgTypeXcvrReadReq_c = 0x1D,
- aspMsgTypeSetANTXState_c = 0x20,
- aspMsgTypeGetANTXState_c = 0x21,
- aspMsgTypeSetLQIMode_c = 0x22,
- aspMsgTypeGetRSSILevel_c = 0x23,
- aspMsgTypeSetMpmConfig_c = 0x24,
- aspMsgTypeGetMpmConfig_c = 0x25
-}AppAspMsgType_t;
-
-typedef PACKED_STRUCT aspEventReq_tag
-{ /* AspEvent.Request */
- uint32_t eventTime;
-} aspEventReq_t;
-
-typedef PACKED_STRUCT aspGetTimeReq_tag
-{ /* AspGetTime.Request */
- uint32_t time;
-} aspGetTimeReq_t;
-
-typedef PACKED_STRUCT aspSetNotifyReq_tag
-{ /* AspSetNotify.Request */
- uint8_t notifications;
-} aspSetNotifyReq_t;
-
-
-typedef PACKED_STRUCT aspSetPowerLevelReq_tag
-{ /* AspSetPowerLevel.Request */
- uint8_t powerLevel;
-} aspSetPowerLevelReq_t;
-
-
-typedef PACKED_STRUCT aspGetPowerLevelReq_tag
-{ /* AspGetPowerLevel.Request */
- uint8_t powerLevel;
-} aspGetPowerLevelReq_t;
-
-
-typedef PACKED_STRUCT aspTelecTest_tag
-{ /* AspTelecTest.Request */
- uint8_t mode;
-} aspTelecTest_t;
-
-
-typedef PACKED_STRUCT aspTelecsetFreq_tag
-{ /* AspTelecSetFreq.Request */
- uint8_t channel;
-} aspTelecsetFreq_t;
-
-
-typedef PACKED_STRUCT aspTelecSendRawData_tag
-{ /* AspTelecSendRawData.Request */
- uint8_t length;
- uint8_t* dataPtr;
-} aspTelecSendRawData_t;
-
- /* AspSetFADThreshold.Request */
-typedef uint8_t aspFADThreshold_t;
- /* AspSetLQIMode.Request */
-typedef uint8_t aspLQIMode_t;
-
-typedef PACKED_STRUCT aspXcvrReq_tag
-{ /* AspXcvrWrite.Request / AspXcvrRead.Request */
- uint8_t mode;
- uint16_t addr;
- uint8_t len;
- uint8_t data[4]; /* more than 4 bytes can be read/written */
-} aspXcvrReq_t;
-
-
-typedef PACKED_STRUCT AppToAspMessage_tag
-{
- AppAspMsgType_t msgType;
- PACKED_UNION
- {
- aspEventReq_t aspEventReq;
- aspGetTimeReq_t aspGetTimeReq;
- aspSetPowerLevelReq_t aspSetPowerLevelReq;
- aspGetPowerLevelReq_t aspGetPowerLevelReq;
- aspTelecTest_t aspTelecTest;
- aspTelecsetFreq_t aspTelecsetFreq;
- aspTelecSendRawData_t aspTelecSendRawData;
- aspFADThreshold_t aspFADThreshold;
- bool_t aspFADState;
- bool_t aspANTXState;
- aspLQIMode_t aspLQIMode;
- bool_t aspActivePromState;
- aspXcvrReq_t aspXcvrData;
- mpmConfig_t MpmConfig;
- }msgData;
-} AppToAspMessage_t;
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/************************************************************************************
-*************************************************************************************
-* Public memory declarations
-*************************************************************************************
-************************************************************************************/
-
-/************************************************************************************
-*************************************************************************************
-* Public functions
-*************************************************************************************
-************************************************************************************/
-#if gAspCapability_d
-
-void ASP_Init( instanceId_t phyInstance, uint8_t interfaceId );
-
-AspStatus_t APP_ASP_SapHandler(AppToAspMessage_t *pMsg, instanceId_t instanceId);
-
-void Asp_GetTimeReq(uint32_t *time);
-
-AspStatus_t Asp_XcvrWriteReq (uint8_t mode, uint16_t addr, uint8_t len, uint8_t* pData);
-AspStatus_t Asp_XcvrReadReq (uint8_t mode, uint16_t addr, uint8_t len, uint8_t* pData);
-
-AspStatus_t Asp_SetPowerLevel(uint8_t powerLevel);
-uint8_t Asp_GetPowerLevel(void);
-
-AspStatus_t Asp_SetActivePromState(bool_t state);
-
-AspStatus_t Asp_SetFADState(bool_t state);
-AspStatus_t Asp_SetFADThreshold(uint8_t thresholdFAD);
-
-AspStatus_t Asp_SetANTXState(bool_t state);
-uint8_t Asp_GetANTXState(void);
-uint8_t Asp_SetANTPadStateRequest(bool_t antAB_on, bool_t rxtxSwitch_on);
-uint8_t Asp_SetANTPadStrengthRequest(bool_t hiStrength);
-uint8_t Asp_SetANTPadInvertedRequest(bool_t invAntA, bool_t invAntB, bool_t invTx, bool_t invRx);
-
-AspStatus_t Asp_SetLQIMode(bool_t mode);
-uint8_t Asp_GetRSSILevel(void);
-
-AspStatus_t ASP_TelecSetFreq (uint8_t channel);
-AspStatus_t ASP_TelecSendRawData(uint8_t* dataPtr);
-AspStatus_t ASP_TelecTest (uint8_t mode);
-
-#else /* gAspCapability_d */
-
-#define ASP_Init(phyInstance,interfaceId)
-#define Asp_GetTimeReq(time)
-
-#define APP_ASP_SapHandler(pMsg) (gAspDenied_c)
-#define Asp_XcvrWriteReq(mode, addr, len, pData) (gAspDenied_c)
-#define Asp_XcvrReadReq(mode, addr, len, pData) (gAspDenied_c)
-#define Asp_SetPowerLevel(powerLevel) (gAspDenied_c)
-#define Asp_SetActivePromState(state) (gAspDenied_c)
-#define Asp_SetFADState(state) (gAspDenied_c)
-#define Asp_SetFADThreshold(thresholdFAD) (gAspDenied_c)
-#define Asp_SetANTXState(state) (gAspDenied_c)
-#define Asp_SetLQIMode(mode) (gAspDenied_c)
-#define ASP_TelecSetFreq(channel) (gAspDenied_c)
-#define ASP_TelecSendRawData(dataPtr) (gAspDenied_c)
-#define ASP_TelecTest(mode) (gAspDenied_c)
-
-#define Asp_GetPowerLevel() (0)
-#define Asp_GetANTXState() (0)
-#define Asp_GetRSSILevel() (0)
-#endif /* gAspCapability_d */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /*__ASP_H__ */
--- a/FSL_IEEE_802_15_4/PHY/MCR20Drv/MCR20Drv.c Fri Jul 31 13:49:46 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,735 +0,0 @@
-/*!
-* Copyright (c) 2015, Freescale Semiconductor, Inc.
-* All rights reserved.
-*
-* \file MCR20Drv.c
-*
-* Redistribution and use in source and binary forms, with or without modification,
-* are permitted provided that the following conditions are met:
-*
-* o Redistributions of source code must retain the above copyright notice, this list
-* of conditions and the following disclaimer.
-*
-* o Redistributions in binary form must reproduce the above copyright notice, this
-* list of conditions and the following disclaimer in the documentation and/or
-* other materials provided with the distribution.
-*
-* o Neither the name of Freescale Semiconductor, Inc. nor the names of its
-* contributors may be used to endorse or promote products derived from this
-* software without specific prior written permission.
-*
-* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
-* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
-* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-*/
-
-
-/*****************************************************************************
-* INCLUDED HEADERS *
-*---------------------------------------------------------------------------*
-* Add to this section all the headers that this module needs to include. *
-*---------------------------------------------------------------------------*
-*****************************************************************************/
-
-#include "MCR20Drv.h"
-#include "MCR20Reg.h"
-
-#include "XcvrSpi.h"
-
-/*****************************************************************************
-* PRIVATE VARIABLES *
-*---------------------------------------------------------------------------*
-* Add to this section all the variables and constants that have local *
-* (file) scope. *
-* Each of this declarations shall be preceded by the 'static' keyword. *
-* These variables / constants cannot be accessed outside this module. *
-*---------------------------------------------------------------------------*
-*****************************************************************************/
-static uint32_t mPhyIrqDisableCnt = 1;
-
-/*****************************************************************************
-* PUBLIC VARIABLES *
-*---------------------------------------------------------------------------*
-* Add to this section all the variables and constants that have global *
-* (project) scope. *
-* These variables / constants can be accessed outside this module. *
-* These variables / constants shall be preceded by the 'extern' keyword in *
-* the interface header. *
-*---------------------------------------------------------------------------*
-*****************************************************************************/
-
-/*****************************************************************************
-* PRIVATE FUNCTIONS PROTOTYPES *
-*---------------------------------------------------------------------------*
-* Add to this section all the functions prototypes that have local (file) *
-* scope. *
-* These functions cannot be accessed outside this module. *
-* These declarations shall be preceded by the 'static' keyword. *
-*---------------------------------------------------------------------------*
-*****************************************************************************/
-
-/*****************************************************************************
-* PRIVATE FUNCTIONS *
-*---------------------------------------------------------------------------*
-* Add to this section all the functions that have local (file) scope. *
-* These functions cannot be accessed outside this module. *
-* These definitions shall be preceded by the 'static' keyword. *
-*---------------------------------------------------------------------------*
-*****************************************************************************/
-
-
-/*****************************************************************************
-* PUBLIC FUNCTIONS *
-*---------------------------------------------------------------------------*
-* Add to this section all the functions that have global (project) scope. *
-* These functions can be accessed outside this module. *
-* These functions shall have their declarations (prototypes) within the *
-* interface header file and shall be preceded by the 'extern' keyword. *
-*---------------------------------------------------------------------------*
-*****************************************************************************/
-
-/*---------------------------------------------------------------------------
-* Name: MCR20Drv_Init
-* Description: -
-* Parameters: -
-* Return: -
-*---------------------------------------------------------------------------*/
-void MCR20Drv_Init
-(
-void
-)
-{
- spi_master_init(gXcvrSpiInstance_c);
- spi_master_configure_speed(gXcvrSpiInstance_c, 8000000);
-
- gXcvrDeassertCS_d();
- MCR20Drv_RST_B_Deassert();
- //MCR20Drv_RESET();
-}
-
-/*---------------------------------------------------------------------------
-* Name: MCR20Drv_DirectAccessSPIWrite
-* Description: -
-* Parameters: -
-* Return: -
-*---------------------------------------------------------------------------*/
-void MCR20Drv_DirectAccessSPIWrite
-(
-uint8_t address,
-uint8_t value
-)
-{
- uint16_t txData;
-
- ProtectFromMCR20Interrupt();
-
- spi_master_configure_speed(gXcvrSpiInstance_c, 16000000);
-
- gXcvrAssertCS_d();
-
- txData = (address & TransceiverSPI_DirectRegisterAddressMask);
- txData |= value << 8;
-
- spi_master_transfer(gXcvrSpiInstance_c, (uint8_t *)&txData, NULL, sizeof(txData));
-
- gXcvrDeassertCS_d();
- UnprotectFromMCR20Interrupt();
-}
-
-/*---------------------------------------------------------------------------
-* Name: MCR20Drv_DirectAccessSPIMultiByteWrite
-* Description: -
-* Parameters: -
-* Return: -
-*---------------------------------------------------------------------------*/
-void MCR20Drv_DirectAccessSPIMultiByteWrite
-(
-uint8_t startAddress,
-uint8_t * byteArray,
-uint8_t numOfBytes
-)
-{
- uint8_t txData;
-
- if( (numOfBytes == 0) || (byteArray == NULL) )
- {
- return;
- }
-
- ProtectFromMCR20Interrupt();
-
- spi_master_configure_speed(gXcvrSpiInstance_c, 16000000);
-
- gXcvrAssertCS_d();
-
- txData = (startAddress & TransceiverSPI_DirectRegisterAddressMask);
-
- spi_master_transfer(gXcvrSpiInstance_c, &txData, NULL, sizeof(txData));
- spi_master_transfer(gXcvrSpiInstance_c, byteArray, NULL, numOfBytes);
-
- gXcvrDeassertCS_d();
- UnprotectFromMCR20Interrupt();
-}
-
-/*---------------------------------------------------------------------------
-* Name: MCR20Drv_PB_SPIByteWrite
-* Description: -
-* Parameters: -
-* Return: -
-*---------------------------------------------------------------------------*/
-void MCR20Drv_PB_SPIByteWrite
-(
-uint8_t address,
-uint8_t value
-)
-{
- uint32_t txData;
-
- ProtectFromMCR20Interrupt();
-
- spi_master_configure_speed(gXcvrSpiInstance_c, 16000000);
-
- gXcvrAssertCS_d();
-
- txData = TransceiverSPI_WriteSelect |
- TransceiverSPI_PacketBuffAccessSelect |
- TransceiverSPI_PacketBuffByteModeSelect;
- txData |= (address) << 8;
- txData |= (value) << 16;
-
- spi_master_transfer(gXcvrSpiInstance_c, (uint8_t*)&txData, NULL, 3);
-
- gXcvrDeassertCS_d();
- UnprotectFromMCR20Interrupt();
-}
-
-/*---------------------------------------------------------------------------
-* Name: MCR20Drv_PB_SPIBurstWrite
-* Description: -
-* Parameters: -
-* Return: -
-*---------------------------------------------------------------------------*/
-void MCR20Drv_PB_SPIBurstWrite
-(
-uint8_t * byteArray,
-uint8_t numOfBytes
-)
-{
- uint8_t txData;
-
- if( (numOfBytes == 0) || (byteArray == NULL) )
- {
- return;
- }
-
- ProtectFromMCR20Interrupt();
-
- spi_master_configure_speed(gXcvrSpiInstance_c, 16000000);
-
- gXcvrAssertCS_d();
-
- txData = TransceiverSPI_WriteSelect |
- TransceiverSPI_PacketBuffAccessSelect |
- TransceiverSPI_PacketBuffBurstModeSelect;
-
- spi_master_transfer(gXcvrSpiInstance_c, &txData, NULL, 1);
- spi_master_transfer(gXcvrSpiInstance_c, byteArray, NULL, numOfBytes);
-
- gXcvrDeassertCS_d();
- UnprotectFromMCR20Interrupt();
-}
-
-/*---------------------------------------------------------------------------
-* Name: MCR20Drv_DirectAccessSPIRead
-* Description: -
-* Parameters: -
-* Return: -
-*---------------------------------------------------------------------------*/
-
-uint8_t MCR20Drv_DirectAccessSPIRead
-(
-uint8_t address
-)
-{
- uint8_t txData;
- uint8_t rxData;
-
- ProtectFromMCR20Interrupt();
-
- spi_master_configure_speed(gXcvrSpiInstance_c, 8000000);
-
- gXcvrAssertCS_d();
-
- txData = (address & TransceiverSPI_DirectRegisterAddressMask) |
- TransceiverSPI_ReadSelect;
-
- spi_master_transfer(gXcvrSpiInstance_c, &txData, NULL, sizeof(txData));
- spi_master_transfer(gXcvrSpiInstance_c, NULL, &rxData, sizeof(rxData));
-
- gXcvrDeassertCS_d();
- UnprotectFromMCR20Interrupt();
-
- return rxData;
-
-}
-
-/*---------------------------------------------------------------------------
-* Name: MCR20Drv_DirectAccessSPIMultyByteRead
-* Description: -
-* Parameters: -
-* Return: -
-*---------------------------------------------------------------------------*/
-uint8_t MCR20Drv_DirectAccessSPIMultiByteRead
-(
-uint8_t startAddress,
-uint8_t * byteArray,
-uint8_t numOfBytes
-)
-{
- uint8_t txData;
- uint8_t phyIRQSTS1;
-
- if( (numOfBytes == 0) || (byteArray == NULL) )
- {
- return 0;
- }
-
- ProtectFromMCR20Interrupt();
-
- spi_master_configure_speed(gXcvrSpiInstance_c, 8000000);
-
- gXcvrAssertCS_d();
-
- txData = (startAddress & TransceiverSPI_DirectRegisterAddressMask) |
- TransceiverSPI_ReadSelect;
-
- spi_master_transfer(gXcvrSpiInstance_c, &txData, &phyIRQSTS1, sizeof(txData));
- spi_master_transfer(gXcvrSpiInstance_c, NULL, byteArray, numOfBytes);
-
- gXcvrDeassertCS_d();
- UnprotectFromMCR20Interrupt();
-
- return phyIRQSTS1;
-}
-
-/*---------------------------------------------------------------------------
-* Name: MCR20Drv_PB_SPIBurstRead
-* Description: -
-* Parameters: -
-* Return: -
-*---------------------------------------------------------------------------*/
-uint8_t MCR20Drv_PB_SPIBurstRead
-(
-uint8_t * byteArray,
-uint8_t numOfBytes
-)
-{
- uint8_t txData;
- uint8_t phyIRQSTS1;
-
- if( (numOfBytes == 0) || (byteArray == NULL) )
- {
- return 0;
- }
-
- ProtectFromMCR20Interrupt();
-
- spi_master_configure_speed(gXcvrSpiInstance_c, 8000000);
-
- gXcvrAssertCS_d();
-
- txData = TransceiverSPI_ReadSelect |
- TransceiverSPI_PacketBuffAccessSelect |
- TransceiverSPI_PacketBuffBurstModeSelect;
-
- spi_master_transfer(gXcvrSpiInstance_c, &txData, &phyIRQSTS1, sizeof(txData));
- spi_master_transfer(gXcvrSpiInstance_c, NULL, byteArray, numOfBytes);
-
- gXcvrDeassertCS_d();
- UnprotectFromMCR20Interrupt();
-
- return phyIRQSTS1;
-}
-
-/*---------------------------------------------------------------------------
-* Name: MCR20Drv_IndirectAccessSPIWrite
-* Description: -
-* Parameters: -
-* Return: -
-*---------------------------------------------------------------------------*/
-void MCR20Drv_IndirectAccessSPIWrite
-(
-uint8_t address,
-uint8_t value
-)
-{
- uint32_t txData;
-
- ProtectFromMCR20Interrupt();
-
- spi_master_configure_speed(gXcvrSpiInstance_c, 16000000);
-
- gXcvrAssertCS_d();
-
- txData = TransceiverSPI_IARIndexReg;
- txData |= (address) << 8;
- txData |= (value) << 16;
-
- spi_master_transfer(gXcvrSpiInstance_c, (uint8_t*)&txData, NULL, 3);
-
- gXcvrDeassertCS_d();
- UnprotectFromMCR20Interrupt();
-}
-
-/*---------------------------------------------------------------------------
-* Name: MCR20Drv_IndirectAccessSPIMultiByteWrite
-* Description: -
-* Parameters: -
-* Return: -
-*---------------------------------------------------------------------------*/
-void MCR20Drv_IndirectAccessSPIMultiByteWrite
-(
-uint8_t startAddress,
-uint8_t * byteArray,
-uint8_t numOfBytes
-)
-{
- uint16_t txData;
-
- if( (numOfBytes == 0) || (byteArray == NULL) )
- {
- return;
- }
-
- ProtectFromMCR20Interrupt();
-
- spi_master_configure_speed(gXcvrSpiInstance_c, 16000000);
-
- gXcvrAssertCS_d();
-
- txData = TransceiverSPI_IARIndexReg;
- txData |= (startAddress) << 8;
-
- spi_master_transfer(gXcvrSpiInstance_c, (uint8_t*)&txData, NULL, sizeof(txData));
- spi_master_transfer(gXcvrSpiInstance_c, (uint8_t*)byteArray, NULL, numOfBytes);
-
- gXcvrDeassertCS_d();
- UnprotectFromMCR20Interrupt();
-}
-
-/*---------------------------------------------------------------------------
-* Name: MCR20Drv_IndirectAccessSPIRead
-* Description: -
-* Parameters: -
-* Return: -
-*---------------------------------------------------------------------------*/
-uint8_t MCR20Drv_IndirectAccessSPIRead
-(
-uint8_t address
-)
-{
- uint16_t txData;
- uint8_t rxData;
-
- ProtectFromMCR20Interrupt();
-
- spi_master_configure_speed(gXcvrSpiInstance_c, 8000000);
-
- gXcvrAssertCS_d();
-
- txData = TransceiverSPI_IARIndexReg | TransceiverSPI_ReadSelect;
- txData |= (address) << 8;
-
- spi_master_transfer(gXcvrSpiInstance_c, (uint8_t*)&txData, NULL, sizeof(txData));
- spi_master_transfer(gXcvrSpiInstance_c, NULL, &rxData, sizeof(rxData));
-
- gXcvrDeassertCS_d();
- UnprotectFromMCR20Interrupt();
-
- return rxData;
-}
-
-/*---------------------------------------------------------------------------
-* Name: MCR20Drv_IndirectAccessSPIMultiByteRead
-* Description: -
-* Parameters: -
-* Return: -
-*---------------------------------------------------------------------------*/
-void MCR20Drv_IndirectAccessSPIMultiByteRead
-(
-uint8_t startAddress,
-uint8_t * byteArray,
-uint8_t numOfBytes
-)
-{
- uint16_t txData;
-
- if( (numOfBytes == 0) || (byteArray == NULL) )
- {
- return;
- }
-
- ProtectFromMCR20Interrupt();
-
- spi_master_configure_speed(gXcvrSpiInstance_c, 8000000);
-
- gXcvrAssertCS_d();
-
- txData = (TransceiverSPI_IARIndexReg | TransceiverSPI_ReadSelect);
- txData |= (startAddress) << 8;
-
- spi_master_transfer(gXcvrSpiInstance_c, (uint8_t*)&txData, NULL, sizeof(txData));
- spi_master_transfer(gXcvrSpiInstance_c, NULL, byteArray, numOfBytes);
-
- gXcvrDeassertCS_d();
- UnprotectFromMCR20Interrupt();
-}
-
-/*---------------------------------------------------------------------------
-* Name: MCR20Drv_IRQ_PortConfig
-* Description: -
-* Parameters: -
-* Return: -
-*---------------------------------------------------------------------------*/
-void MCR20Drv_IRQ_PortConfig
-(
-void
-)
-{
-#if 0
- PORT_HAL_SetMuxMode(g_portBaseAddr[GPIO_EXTRACT_PORT(kGpioXcvrIrqPin)],
- GPIO_EXTRACT_PIN(kGpioXcvrIrqPin),
- kPortMuxAsGpio);
- GPIO_DRV_InputPinInit(&mXcvrIrqPinCfg);
-#endif
-}
-
-/*---------------------------------------------------------------------------
-* Name: MCR20Drv_IsIrqPending
-* Description: -
-* Parameters: -
-* Return: -
-*---------------------------------------------------------------------------*/
-uint32_t MCR20Drv_IsIrqPending
-(
-void
-)
-{
- if( !RF_isIRQ_Pending() )
- {
- return TRUE;
- }
-
- return FALSE;
-}
-
-/*---------------------------------------------------------------------------
-* Name: MCR20Drv_IRQ_Disable
-* Description: -
-* Parameters: -
-* Return: -
-*---------------------------------------------------------------------------*/
-void MCR20Drv_IRQ_Disable
-(
-void
-)
-{
- OSA_EnterCritical(kCriticalDisableInt);
-
- if( mPhyIrqDisableCnt == 0 )
- {
- RF_IRQ_Disable();
- }
-
- mPhyIrqDisableCnt++;
-
- OSA_ExitCritical(kCriticalDisableInt);
-}
-
-/*---------------------------------------------------------------------------
-* Name: MCR20Drv_IRQ_Enable
-* Description: -
-* Parameters: -
-* Return: -
-*---------------------------------------------------------------------------*/
-void MCR20Drv_IRQ_Enable
-(
-void
-)
-{
- OSA_EnterCritical(kCriticalDisableInt);
-
- if( mPhyIrqDisableCnt )
- {
- mPhyIrqDisableCnt--;
-
- if( mPhyIrqDisableCnt == 0 )
- {
- RF_IRQ_Enable();
- }
- }
-
- OSA_ExitCritical(kCriticalDisableInt);
-}
-
-/*---------------------------------------------------------------------------
-* Name: MCR20Drv_IRQ_IsEnabled
-* Description: -
-* Parameters: -
-* Return: -
-*---------------------------------------------------------------------------*/
-uint32_t MCR20Drv_IRQ_IsEnabled
-(
-void
-)
-{
-
-#if 0
- port_interrupt_config_t mode;
-
- mode = PORT_HAL_GetPinIntMode(g_portBaseAddr[GPIO_EXTRACT_PORT(kGpioXcvrIrqPin)],
- GPIO_EXTRACT_PIN(kGpioXcvrIrqPin));
- return (mode != kPortIntDisabled);
-#endif
- return 1;
-}
-
-/*---------------------------------------------------------------------------
-* Name: MCR20Drv_IRQ_Clear
-* Description: -
-* Parameters: -
-* Return: -
-*---------------------------------------------------------------------------*/
-void MCR20Drv_IRQ_Clear
-(
-void
-)
-{
- //GPIO_DRV_ClearPinIntFlag(kGpioXcvrIrqPin);
-}
-
-/*---------------------------------------------------------------------------
-* Name: MCR20Drv_RST_Assert
-* Description: -
-* Parameters: -
-* Return: -
-*---------------------------------------------------------------------------*/
-void MCR20Drv_RST_B_Assert
-(
-void
-)
-{
- RF_RST_Set(0);
- //GPIO_DRV_ClearPinOutput(kGpioXcvrResetPin);
-}
-
-/*---------------------------------------------------------------------------
-* Name: MCR20Drv_RST_Deassert
-* Description: -
-* Parameters: -
-* Return: -
-*---------------------------------------------------------------------------*/
-void MCR20Drv_RST_B_Deassert
-(
-void
-)
-{
- RF_RST_Set(1);
- //GPIO_DRV_SetPinOutput(kGpioXcvrResetPin);
-}
-
-/*---------------------------------------------------------------------------
-* Name: MCR20Drv_SoftRST_Assert
-* Description: -
-* Parameters: -
-* Return: -
-*---------------------------------------------------------------------------*/
-void MCR20Drv_SoftRST_Assert
-(
-void
-)
-{
- MCR20Drv_IndirectAccessSPIWrite(SOFT_RESET, (0x80));
-}
-
-/*---------------------------------------------------------------------------
-* Name: MCR20Drv_SoftRST_Deassert
-* Description: -
-* Parameters: -
-* Return: -
-*---------------------------------------------------------------------------*/
-void MCR20Drv_SoftRST_Deassert
-(
-void
-)
-{
- MCR20Drv_IndirectAccessSPIWrite(SOFT_RESET, (0x00));
-}
-
-/*---------------------------------------------------------------------------
-* Name: MCR20Drv_Soft_RESET
-* Description: -
-* Parameters: -
-* Return: -
-*---------------------------------------------------------------------------*/
-void MCR20Drv_Soft_RESET
-(
-void
-)
-{
- //assert SOG_RST
- MCR20Drv_IndirectAccessSPIWrite(SOFT_RESET, (0x80));
-
- //deassert SOG_RST
- MCR20Drv_IndirectAccessSPIWrite(SOFT_RESET, (0x00));
-}
-
-/*---------------------------------------------------------------------------
-* Name: MCR20Drv_RESET
-* Description: -
-* Parameters: -
-* Return: -
-*---------------------------------------------------------------------------*/
-void MCR20Drv_RESET
-(
-void
-)
-{
- volatile uint32_t delay = 1000;
- //assert RST_B
- MCR20Drv_RST_B_Assert();
-
- // TODO
- while(delay--);
-
- //deassert RST_B
- MCR20Drv_RST_B_Deassert();
-}
-
-/*---------------------------------------------------------------------------
-* Name: MCR20Drv_Set_CLK_OUT_Freq
-* Description: -
-* Parameters: -
-* Return: -
-*---------------------------------------------------------------------------*/
-void MCR20Drv_Set_CLK_OUT_Freq
-(
-uint8_t freqDiv
-)
-{
- uint8_t clkOutCtrlReg = (freqDiv & cCLK_OUT_DIV_Mask) | cCLK_OUT_EN | cCLK_OUT_EXTEND;
-
- if(freqDiv == gCLK_OUT_FREQ_DISABLE)
- {
- clkOutCtrlReg = (cCLK_OUT_EXTEND | gCLK_OUT_FREQ_4_MHz); //reset value with clock out disabled
- }
-
- MCR20Drv_DirectAccessSPIWrite((uint8_t) CLK_OUT_CTRL, clkOutCtrlReg);
-}
--- a/FSL_IEEE_802_15_4/PHY/MCR20Drv/MCR20Drv.h Fri Jul 31 13:49:46 2015 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,406 +0,0 @@ -/*! -* Copyright (c) 2015, Freescale Semiconductor, Inc. -* All rights reserved. -* -* \file MCR20Drv.h -* -* Redistribution and use in source and binary forms, with or without modification, -* are permitted provided that the following conditions are met: -* -* o Redistributions of source code must retain the above copyright notice, this list -* of conditions and the following disclaimer. -* -* o Redistributions in binary form must reproduce the above copyright notice, this -* list of conditions and the following disclaimer in the documentation and/or -* other materials provided with the distribution. -* -* o Neither the name of Freescale Semiconductor, Inc. nor the names of its -* contributors may be used to endorse or promote products derived from this -* software without specific prior written permission. -* -* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR -* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -*/ - -#ifndef __MCR20_DRV_H__ -#define __MCR20_DRV_H__ - - -/***************************************************************************** - * INCLUDED HEADERS * - *---------------------------------------------------------------------------* - * Add to this section all the headers that this module needs to include. * - * Note that it is not a good practice to include header files into header * - * files, so use this section only if there is no other better solution. * - *---------------------------------------------------------------------------* - *****************************************************************************/ - -#include "EmbeddedTypes.h" -#include "mbedAbstraction.h" - -/***************************************************************************** - * PRIVATE MACROS * - *---------------------------------------------------------------------------* - * Add to this section all the access macros, registers mappings, bit access * - * macros, masks, flags etc ... - *---------------------------------------------------------------------------* - *****************************************************************************/ -#ifndef gMCR20_ClkOutFreq_d -#define gMCR20_ClkOutFreq_d gCLK_OUT_FREQ_4_MHz -#endif - -/***************************************************************************** - * PUBLIC FUNCTIONS * - *---------------------------------------------------------------------------* - * Add to this section all the global functions prototype preceded (as a * - * good practice) by the keyword 'extern' * - *---------------------------------------------------------------------------* - *****************************************************************************/ - -/*--------------------------------------------------------------------------- - * Name: MCR20Drv_Init - * Description: - - * Parameters: - - * Return: - - *---------------------------------------------------------------------------*/ -extern void MCR20Drv_Init -( - void -); - -/*--------------------------------------------------------------------------- - * Name: MCR20Drv_SPI_DMA_Init - * Description: - - * Parameters: - - * Return: - - *---------------------------------------------------------------------------*/ -void MCR20Drv_SPI_DMA_Init -( - void -); - -/*--------------------------------------------------------------------------- - * Name: MCR20Drv_Start_PB_DMA_SPI_Write - * Description: - - * Parameters: - - * Return: - - *---------------------------------------------------------------------------*/ -void MCR20Drv_Start_PB_DMA_SPI_Write -( - uint8_t * srcAddress, - uint8_t numOfBytes -); - -/*--------------------------------------------------------------------------- - * Name: MCR20Drv_Start_PB_DMA_SPI_Read - * Description: - - * Parameters: - - * Return: - - *---------------------------------------------------------------------------*/ -void MCR20Drv_Start_PB_DMA_SPI_Read -( - uint8_t * dstAddress, - uint8_t numOfBytes -); - -/*--------------------------------------------------------------------------- - * Name: MCR20Drv_DirectAccessSPIWrite - * Description: - - * Parameters: - - * Return: - - *---------------------------------------------------------------------------*/ -void MCR20Drv_DirectAccessSPIWrite -( - uint8_t address, - uint8_t value -); - -/*--------------------------------------------------------------------------- - * Name: MCR20Drv_DirectAccessSPIMultiByteWrite - * Description: - - * Parameters: - - * Return: - - *---------------------------------------------------------------------------*/ -void MCR20Drv_DirectAccessSPIMultiByteWrite -( - uint8_t startAddress, - uint8_t * byteArray, - uint8_t numOfBytes -); - -/*--------------------------------------------------------------------------- - * Name: MCR20Drv_PB_SPIBurstWrite - * Description: - - * Parameters: - - * Return: - - *---------------------------------------------------------------------------*/ -void MCR20Drv_PB_SPIBurstWrite -( - uint8_t * byteArray, - uint8_t numOfBytes -); - -/*--------------------------------------------------------------------------- - * Name: MCR20Drv_DirectAccessSPIRead - * Description: - - * Parameters: - - * Return: - - *---------------------------------------------------------------------------*/ -uint8_t MCR20Drv_DirectAccessSPIRead -( - uint8_t address -); - -/*--------------------------------------------------------------------------- - * Name: MCR20Drv_DirectAccessSPIMultyByteRead - * Description: - - * Parameters: - - * Return: - - *---------------------------------------------------------------------------*/ - -uint8_t MCR20Drv_DirectAccessSPIMultiByteRead -( - uint8_t startAddress, - uint8_t * byteArray, - uint8_t numOfBytes -); - -/*--------------------------------------------------------------------------- - * Name: MCR20Drv_PB_SPIByteWrite - * Description: - - * Parameters: - - * Return: - - *---------------------------------------------------------------------------*/ -void MCR20Drv_PB_SPIByteWrite -( - uint8_t address, - uint8_t value -); - -/*--------------------------------------------------------------------------- - * Name: MCR20Drv_PB_SPIBurstRead - * Description: - - * Parameters: - - * Return: - - *---------------------------------------------------------------------------*/ -uint8_t MCR20Drv_PB_SPIBurstRead -( - uint8_t * byteArray, - uint8_t numOfBytes -); - -/*--------------------------------------------------------------------------- - * Name: MCR20Drv_IndirectAccessSPIWrite - * Description: - - * Parameters: - - * Return: - - *---------------------------------------------------------------------------*/ -void MCR20Drv_IndirectAccessSPIWrite -( - uint8_t address, - uint8_t value -); - -/*--------------------------------------------------------------------------- - * Name: MCR20Drv_IndirectAccessSPIMultiByteWrite - * Description: - - * Parameters: - - * Return: - - *---------------------------------------------------------------------------*/ -void MCR20Drv_IndirectAccessSPIMultiByteWrite -( - uint8_t startAddress, - uint8_t * byteArray, - uint8_t numOfBytes -); - -/*--------------------------------------------------------------------------- - * Name: MCR20Drv_IndirectAccessSPIRead - * Description: - - * Parameters: - - * Return: - - *---------------------------------------------------------------------------*/ -uint8_t MCR20Drv_IndirectAccessSPIRead -( - uint8_t address -); -/*--------------------------------------------------------------------------- - * Name: MCR20Drv_IndirectAccessSPIMultiByteRead - * Description: - - * Parameters: - - * Return: - - *---------------------------------------------------------------------------*/ -void MCR20Drv_IndirectAccessSPIMultiByteRead -( - uint8_t startAddress, - uint8_t * byteArray, - uint8_t numOfBytes -); - -/*--------------------------------------------------------------------------- - * Name: MCR20Drv_IRQ_PortConfig - * Description: - - * Parameters: - - * Return: - - *---------------------------------------------------------------------------*/ -void MCR20Drv_IRQ_PortConfig -( - void -); - -/*--------------------------------------------------------------------------- - * Name: MCR20Drv_IsIrqPending - * Description: - - * Parameters: - - * Return: - - *---------------------------------------------------------------------------*/ -uint32_t MCR20Drv_IsIrqPending -( - void -); - -/*--------------------------------------------------------------------------- - * Name: MCR20Drv_IRQ_Disable - * Description: - - * Parameters: - - * Return: - - *---------------------------------------------------------------------------*/ -void MCR20Drv_IRQ_Disable -( - void -); - -/*--------------------------------------------------------------------------- - * Name: MCR20Drv_IRQ_Enable - * Description: - - * Parameters: - - * Return: - - *---------------------------------------------------------------------------*/ -void MCR20Drv_IRQ_Enable -( - void -); - -/*--------------------------------------------------------------------------- - * Name: MCR20Drv_IRQ_IsEnabled - * Description: - - * Parameters: - - * Return: - - *---------------------------------------------------------------------------*/ -uint32_t MCR20Drv_IRQ_IsEnabled -( - void -); - -/*--------------------------------------------------------------------------- - * Name: MCR20Drv_IRQ_Clear - * Description: - - * Parameters: - - * Return: - - *---------------------------------------------------------------------------*/ -void MCR20Drv_IRQ_Clear -( - void -); - -/*--------------------------------------------------------------------------- - * Name: MCR20Drv_RST_PortConfig - * Description: - - * Parameters: - - * Return: - - *---------------------------------------------------------------------------*/ -void MCR20Drv_RST_B_PortConfig -( - void -); - -/*--------------------------------------------------------------------------- - * Name: MCR20Drv_RST_Assert - * Description: - - * Parameters: - - * Return: - - *---------------------------------------------------------------------------*/ -void MCR20Drv_RST_B_Assert -( - void -); - -/*--------------------------------------------------------------------------- - * Name: MCR20Drv_RST_Deassert - * Description: - - * Parameters: - - * Return: - - *---------------------------------------------------------------------------*/ -void MCR20Drv_RST_B_Deassert -( - void -); - -/*--------------------------------------------------------------------------- - * Name: MCR20Drv_SoftRST_Assert - * Description: - - * Parameters: - - * Return: - - *---------------------------------------------------------------------------*/ -void MCR20Drv_SoftRST_Assert -( - void -); - -/*--------------------------------------------------------------------------- - * Name: MCR20Drv_SoftRST_Deassert - * Description: - - * Parameters: - - * Return: - - *---------------------------------------------------------------------------*/ -void MCR20Drv_SoftRST_Deassert -( - void -); - - -/*--------------------------------------------------------------------------- - * Name: MCR20Drv_RESET - * Description: - - * Parameters: - - * Return: - - *---------------------------------------------------------------------------*/ -void MCR20Drv_RESET -( - void -); - -/*--------------------------------------------------------------------------- - * Name: MCR20Drv_Soft_RESET - * Description: - - * Parameters: - - * Return: - - *---------------------------------------------------------------------------*/ -void MCR20Drv_Soft_RESET -( - void -); - -/*--------------------------------------------------------------------------- - * Name: MCR20Drv_Set_CLK_OUT_Freq - * Description: - - * Parameters: - - * Return: - - *---------------------------------------------------------------------------*/ -void MCR20Drv_Set_CLK_OUT_Freq -( - uint8_t freqDiv -); - -#define ProtectFromMCR20Interrupt() MCR20Drv_IRQ_Disable() -#define UnprotectFromMCR20Interrupt() MCR20Drv_IRQ_Enable() - -#endif /* __MCR20_DRV_H__ */
--- a/FSL_IEEE_802_15_4/PHY/MCR20Drv/MCR20Overwrites.h Fri Jul 31 13:49:46 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,309 +0,0 @@
-/*!
-* Copyright (c) 2015, Freescale Semiconductor, Inc.
-* All rights reserved.
-*
-* \file MCR20Overwrites.h
-* Description: Overwrites header file for MCR20 Register values
-*
-* Redistribution and use in source and binary forms, with or without modification,
-* are permitted provided that the following conditions are met:
-*
-* o Redistributions of source code must retain the above copyright notice, this list
-* of conditions and the following disclaimer.
-*
-* o Redistributions in binary form must reproduce the above copyright notice, this
-* list of conditions and the following disclaimer in the documentation and/or
-* other materials provided with the distribution.
-*
-* o Neither the name of Freescale Semiconductor, Inc. nor the names of its
-* contributors may be used to endorse or promote products derived from this
-* software without specific prior written permission.
-*
-* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
-* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
-* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-*/
-
-#ifndef OVERWRITES_H_
-#define OVERWRITES_H_
-
-typedef struct overwrites_tag {
- char address;
- char data;
-}overwrites_t;
-
-
-/*****************************************************************************************************************/
-// This file is created exclusively for use with the transceiver 2.0 silicon
-// and is provided for the world to use. It contains a list of all
-// known overwrite values. Overwrite values are non-default register
-// values that configure the transceiver device to a more optimally performing
-// posture. It is expected that low level software (i.e. PHY) will
-// consume this file as a #include, and transfer the contents to the
-// the indicated addresses in the transceiver's memory space. This file has
-// at least one required entry, that being its own version current version
-// number, to be stored at transceiver's location 0x3B the
-// OVERWRITES_VERSION_NUMBER register. The RAM register is provided in
-// the transceiver address space to assist in future debug efforts. The
-// analyst may read this location (once device has been booted with
-// mysterious software) and have a good indication of what register
-// overwrites were performed (with all versions of the overwrites.h file
-// being archived forever at the Compass location shown above.
-//
-// The transceiver has an indirect register (IAR) space. Write access to this space
-// requires 3 or more writes:
-// 1st) the first write is an index value to the indirect (write Bit7=0, register access Bit 6=0) + 0x3E
-// 2nd) IAR Register #0x00 - 0xFF.
-// 3rd) The data to write
-// nth) Burst mode additional data if required.
-//
-// Write access to direct space requires only a single address, data pair.
-
-overwrites_t const overwrites_direct[] ={
-{0x3B, 0x0C}, //version 0C: new value for ACKDELAY targeting 198us (23 May, 2013, Larry Roshak)
-{0x23, 0x17} //PA_PWR new default Power Step is "23"
-};
-
-overwrites_t const overwrites_indirect[] ={
-{0x31, 0x02}, //clear MISO_HIZ_EN (for single SPI master/slave pair) and SPI_PUL_EN (minimize HIB currents)
-{0x91, 0xB3}, //VCO_CTRL1 override VCOALC_REF_TX to 3
-{0x92, 0x07}, //VCO_CTRL2 override VCOALC_REF_RX to 3, keep VCO_BUF_BOOST = 1
-{0x8A, 0x71}, //PA_TUNING override PA_COILTUNING to 001 (27 Nov 2012, D. Brown, on behalf of S. Eid)
-{0x79, 0x2F}, //CHF_IBUF Adjust the gm-C filter gain (+/- 6dB) (21 Dec, 2012, on behalf of S. Soca)
-{0x7A, 0x2F}, //CHF_QBUF Adjust the gm-C filter gain (+/- 6dB) (21 Dec, 2012, on behalf of S. Soca)
-{0x7B, 0x24}, //CHF_IRIN Adjust the filter bandwidth (+/- 0.5MHz) (21 Dec, 2012, on behalf of S. Soca)
-{0x7C, 0x24}, //CHF_QRIN Adjust the filter bandwidth (+/- 0.5MHz) (21 Dec, 2012, on behalf of S. Soca)
-{0x7D, 0x24}, //CHF_IL Adjust the filter bandwidth (+/- 0.5MHz) (21 Dec, 2012, on behalf of S. Soca)
-{0x7E, 0x24}, //CHF_QL Adjust the filter bandwidth (+/- 0.5MHz) (21 Dec, 2012, on behalf of S. Soca)
-{0x7F, 0x32}, //CHF_CC1 Adjust the filter center frequency (+/- 1MHz) (21 Dec, 2012, on behalf of S. Soca)
-{0x80, 0x1D}, //CHF_CCL Adjust the filter center frequency (+/- 1MHz) (21 Dec, 2012, on behalf of S. Soca)
-{0x81, 0x2D}, //CHF_CC2 Adjust the filter center frequency (+/- 1MHz) (21 Dec, 2012, on behalf of S. Soca)
-{0x82, 0x24}, //CHF_IROUT Adjust the filter bandwidth (+/- 0.5MHz) (21 Dec, 2012, on behalf of S. Soca)
-{0x83, 0x24}, //CHF_QROUT Adjust the filter bandwidth (+/- 0.5MHz) (21 Dec, 2012, on behalf of S. Soca)
-{0x64, 0x28}, //PA_CAL_DIS=1 Disabled PA calibration
-{0x52, 0x55}, //AGC_THR1 RSSI tune up
-{0x53, 0x2D}, //AGC_THR2 RSSI tune up
-{0x66, 0x5F}, //ATT_RSSI1 tune up
-{0x67, 0x8F}, //ATT_RSSI2 tune up
-{0x68, 0x61}, //RSSI_OFFSET
-{0x78, 0x03}, //CHF_PMAGAIN
-{0x22, 0x50}, //CCA1_THRESH
-{0x4D, 0x13}, //CORR_NVAL moved from 0x14 to 0x13 for 0.5 dB improved Rx Sensitivity
-{0x39, 0x3D} //ACKDELAY new value targeting a delay of 198us (23 May, 2013, Larry Roshak)
-};
-
-
-/* begin of deprecated versions
-
-==VERSION 1==
-(version 1 is empty)
-
-==VERSION 2==
-overwrites_t const overwrites_indirect[] ={
-{0x31, 0x02} //clear MISO_HIZ_EN (for single SPI master/slave pair) and SPI_PUL_EN (minimize HIB currents)
-};
-
-==VERSION 3==
-overwrites_t const overwrites_indirect[] ={
-{0x31, 0x02}, //clear MISO_HIZ_EN (for single SPI master/slave pair) and SPI_PUL_EN (minimize HIB currents)
-{0x91, 0xB3}, //VCO_CTRL1: override VCOALC_REF_TX to 3
-{0x92, 0x07} //VCO_CTRL2: override VCOALC_REF_RX to 3, keep VCO_BUF_BOOST = 1
-};
-
-==VERSION 4==
-overwrites_t const overwrites_direct[] ={
-{0x3B, 0x04} //version 04 is the current version: update PA_COILTUNING default
-};
-
-overwrites_t const overwrites_indirect[] ={
-{0x31, 0x02}, //clear MISO_HIZ_EN (for single SPI master/slave pair) and SPI_PUL_EN (minimize HIB currents)
-{0x91, 0xB3}, //VCO_CTRL1: override VCOALC_REF_TX to 3
-{0x92, 0x07} //VCO_CTRL2: override VCOALC_REF_RX to 3, keep VCO_BUF_BOOST = 1
-{0x8A, 0x71} //PA_TUNING: override PA_COILTUNING to 001 (27 Nov 2012, D. Brown, on behalf of S. Eid)
-};
-
-==VERSION 5==
-overwrites_t const overwrites_direct[] ={
-{0x3B, 0x05} //version 05: updates Channel Filter Register set (21 Dec 2012, on behalf of S. Soca)
-};
-
-overwrites_t const overwrites_indirect[] ={
-{0x31, 0x02}, //clear MISO_HIZ_EN (for single SPI master/slave pair) and SPI_PUL_EN (minimize HIB currents)
-{0x91, 0xB3}, //VCO_CTRL1 override VCOALC_REF_TX to 3
-{0x92, 0x07} //VCO_CTRL2 override VCOALC_REF_RX to 3, keep VCO_BUF_BOOST = 1
-{0x8A, 0x71} //PA_TUNING override PA_COILTUNING to 001 (27 Nov 2012, D. Brown, on behalf of S. Eid)
-{0x79, 0x2F} //CHF_IBUF Adjust the gm-C filter gain (+/- 6dB) (21 Dec, 2012, on behalf of S. Soca)
-{0x7A, 0x2F} //CHF_QBUF Adjust the gm-C filter gain (+/- 6dB) (21 Dec, 2012, on behalf of S. Soca)
-{0x7B, 0x24} //CHF_IRIN Adjust the filter bandwidth (+/- 0.5MHz) (21 Dec, 2012, on behalf of S. Soca)
-{0x7C, 0x24} //CHF_QRIN Adjust the filter bandwidth (+/- 0.5MHz) (21 Dec, 2012, on behalf of S. Soca)
-{0x7D, 0x24} //CHF_IL Adjust the filter bandwidth (+/- 0.5MHz) (21 Dec, 2012, on behalf of S. Soca)
-{0x7E, 0x24} //CHF_QL Adjust the filter bandwidth (+/- 0.5MHz) (21 Dec, 2012, on behalf of S. Soca)
-{0x82, 0x24} //CHF_IROUT Adjust the filter bandwidth (+/- 0.5MHz) (21 Dec, 2012, on behalf of S. Soca)
-{0x83, 0x24} //CHF_QROUT Adjust the filter bandwidth (+/- 0.5MHz) (21 Dec, 2012, on behalf of S. Soca)
-{0x7F, 0x32} //CHF_CC1 Adjust the filter center frequency (+/- 1MHz) (21 Dec, 2012, on behalf of S. Soca)
-{0x80, 0x1D} //CHF_CCL Adjust the filter center frequency (+/- 1MHz) (21 Dec, 2012, on behalf of S. Soca)
-{0x81, 0x2D} //CHF_CC2 Adjust the filter center frequency (+/- 1MHz) (21 Dec, 2012, on behalf of S. Soca)
-};
-
-==VERSION 6==
-overwrites_t const overwrites_direct[] ={
-{0x3B, 0x06} //version 06: disable PA calibration
-};
-
-overwrites_t const overwrites_indirect[] ={
-{0x31, 0x02}, //clear MISO_HIZ_EN (for single SPI master/slave pair) and SPI_PUL_EN (minimize HIB currents)
-{0x91, 0xB3}, //VCO_CTRL1 override VCOALC_REF_TX to 3
-{0x92, 0x07} //VCO_CTRL2 override VCOALC_REF_RX to 3, keep VCO_BUF_BOOST = 1
-{0x8A, 0x71} //PA_TUNING override PA_COILTUNING to 001 (27 Nov 2012, D. Brown, on behalf of S. Eid)
-{0x79, 0x2F} //CHF_IBUF Adjust the gm-C filter gain (+/- 6dB) (21 Dec, 2012, on behalf of S. Soca)
-{0x7A, 0x2F} //CHF_QBUF Adjust the gm-C filter gain (+/- 6dB) (21 Dec, 2012, on behalf of S. Soca)
-{0x7B, 0x24} //CHF_IRIN Adjust the filter bandwidth (+/- 0.5MHz) (21 Dec, 2012, on behalf of S. Soca)
-{0x7C, 0x24} //CHF_QRIN Adjust the filter bandwidth (+/- 0.5MHz) (21 Dec, 2012, on behalf of S. Soca)
-{0x7D, 0x24} //CHF_IL Adjust the filter bandwidth (+/- 0.5MHz) (21 Dec, 2012, on behalf of S. Soca)
-{0x7E, 0x24} //CHF_QL Adjust the filter bandwidth (+/- 0.5MHz) (21 Dec, 2012, on behalf of S. Soca)
-{0x82, 0x24} //CHF_IROUT Adjust the filter bandwidth (+/- 0.5MHz) (21 Dec, 2012, on behalf of S. Soca)
-{0x83, 0x24} //CHF_QROUT Adjust the filter bandwidth (+/- 0.5MHz) (21 Dec, 2012, on behalf of S. Soca)
-{0x7F, 0x32} //CHF_CC1 Adjust the filter center frequency (+/- 1MHz) (21 Dec, 2012, on behalf of S. Soca)
-{0x80, 0x1D} //CHF_CCL Adjust the filter center frequency (+/- 1MHz) (21 Dec, 2012, on behalf of S. Soca)
-{0x81, 0x2D} //CHF_CC2 Adjust the filter center frequency (+/- 1MHz) (21 Dec, 2012, on behalf of S. Soca)
-{0x64, 0x28} //PA_CAL_DIS=1 Disabled PA calibration
-};
-
-==VERSION 7==
-overwrites_t const overwrites_direct[] ={
-{0x3B, 0x07} //version 07: updated registers for ED/RSSI
-};
-
-overwrites_t const overwrites_indirect[] ={
-{0x31, 0x02}, //clear MISO_HIZ_EN (for single SPI master/slave pair) and SPI_PUL_EN (minimize HIB currents)
-{0x91, 0xB3}, //VCO_CTRL1 override VCOALC_REF_TX to 3
-{0x92, 0x07}, //VCO_CTRL2 override VCOALC_REF_RX to 3, keep VCO_BUF_BOOST = 1
-{0x8A, 0x71}, //PA_TUNING override PA_COILTUNING to 001 (27 Nov 2012, D. Brown, on behalf of S. Eid)
-{0x79, 0x2F}, //CHF_IBUF Adjust the gm-C filter gain (+/- 6dB) (21 Dec, 2012, on behalf of S. Soca)
-{0x7A, 0x2F}, //CHF_QBUF Adjust the gm-C filter gain (+/- 6dB) (21 Dec, 2012, on behalf of S. Soca)
-{0x7B, 0x24}, //CHF_IRIN Adjust the filter bandwidth (+/- 0.5MHz) (21 Dec, 2012, on behalf of S. Soca)
-{0x7C, 0x24}, //CHF_QRIN Adjust the filter bandwidth (+/- 0.5MHz) (21 Dec, 2012, on behalf of S. Soca)
-{0x7D, 0x24}, //CHF_IL Adjust the filter bandwidth (+/- 0.5MHz) (21 Dec, 2012, on behalf of S. Soca)
-{0x7E, 0x24}, //CHF_QL Adjust the filter bandwidth (+/- 0.5MHz) (21 Dec, 2012, on behalf of S. Soca)
-{0x82, 0x24}, //CHF_IROUT Adjust the filter bandwidth (+/- 0.5MHz) (21 Dec, 2012, on behalf of S. Soca)
-{0x83, 0x24}, //CHF_QROUT Adjust the filter bandwidth (+/- 0.5MHz) (21 Dec, 2012, on behalf of S. Soca)
-{0x7F, 0x32}, //CHF_CC1 Adjust the filter center frequency (+/- 1MHz) (21 Dec, 2012, on behalf of S. Soca)
-{0x80, 0x1D}, //CHF_CCL Adjust the filter center frequency (+/- 1MHz) (21 Dec, 2012, on behalf of S. Soca)
-{0x81, 0x2D}, //CHF_CC2 Adjust the filter center frequency (+/- 1MHz) (21 Dec, 2012, on behalf of S. Soca)
-{0x64, 0x28}, //PA_CAL_DIS=1 Disabled PA calibration
-{0x52, 0x73}, //AGC_THR1 RSSI tune up
-{0x53, 0x2D}, //AGC_THR2 RSSI tune up
-{0x66, 0x5F}, //ATT_RSSI1 tune up
-{0x67, 0x8F}, //ATT_RSSI2 tune up
-{0x68, 0x60}, //RSSI_OFFSET
-{0x69, 0x65} //RSSI_SLOPE
-};
-
-
-==VERSION 8==
-overwrites_t const overwrites_direct[] ={
-{0x3B, 0x08} //version 08: updated registers for ED/RSSI
-};
-
-overwrites_t const overwrites_indirect[] ={
-{0x31, 0x02}, //clear MISO_HIZ_EN (for single SPI master/slave pair) and SPI_PUL_EN (minimize HIB currents)
-{0x91, 0xB3}, //VCO_CTRL1 override VCOALC_REF_TX to 3
-{0x92, 0x07}, //VCO_CTRL2 override VCOALC_REF_RX to 3, keep VCO_BUF_BOOST = 1
-{0x8A, 0x71}, //PA_TUNING override PA_COILTUNING to 001 (27 Nov 2012, D. Brown, on behalf of S. Eid)
-{0x79, 0x2F}, //CHF_IBUF Adjust the gm-C filter gain (+/- 6dB) (21 Dec, 2012, on behalf of S. Soca)
-{0x7A, 0x2F}, //CHF_QBUF Adjust the gm-C filter gain (+/- 6dB) (21 Dec, 2012, on behalf of S. Soca)
-{0x7B, 0x24}, //CHF_IRIN Adjust the filter bandwidth (+/- 0.5MHz) (21 Dec, 2012, on behalf of S. Soca)
-{0x7C, 0x24}, //CHF_QRIN Adjust the filter bandwidth (+/- 0.5MHz) (21 Dec, 2012, on behalf of S. Soca)
-{0x7D, 0x24}, //CHF_IL Adjust the filter bandwidth (+/- 0.5MHz) (21 Dec, 2012, on behalf of S. Soca)
-{0x7E, 0x24}, //CHF_QL Adjust the filter bandwidth (+/- 0.5MHz) (21 Dec, 2012, on behalf of S. Soca)
-{0x82, 0x24}, //CHF_IROUT Adjust the filter bandwidth (+/- 0.5MHz) (21 Dec, 2012, on behalf of S. Soca)
-{0x83, 0x24}, //CHF_QROUT Adjust the filter bandwidth (+/- 0.5MHz) (21 Dec, 2012, on behalf of S. Soca)
-{0x7F, 0x32}, //CHF_CC1 Adjust the filter center frequency (+/- 1MHz) (21 Dec, 2012, on behalf of S. Soca)
-{0x80, 0x1D}, //CHF_CCL Adjust the filter center frequency (+/- 1MHz) (21 Dec, 2012, on behalf of S. Soca)
-{0x81, 0x2D}, //CHF_CC2 Adjust the filter center frequency (+/- 1MHz) (21 Dec, 2012, on behalf of S. Soca)
-{0x64, 0x28}, //PA_CAL_DIS=1 Disabled PA calibration
-{0x52, 0x73}, //AGC_THR1 RSSI tune up
-{0x53, 0x2D}, //AGC_THR2 RSSI tune up
-{0x66, 0x5F}, //ATT_RSSI1 tune up
-{0x67, 0x8F}, //ATT_RSSI2 tune up
-{0x69, 0x65} //RSSI_SLOPE
-{0x68, 0x61}, //RSSI_OFFSET
-{0x78, 0x03} //CHF_PMAGAIN
-};
-
-
-==VERSION 9==
-overwrites_t const overwrites_direct[] ={
-{0x3B, 0x09} //version 09: updated registers for ED/RSSI and PowerStep
-{0x23, 0x17} //PA_PWR new default value
-};
-
-overwrites_t const overwrites_indirect[] ={
-{0x31, 0x02}, //clear MISO_HIZ_EN (for single SPI master/slave pair) and SPI_PUL_EN (minimize HIB currents)
-{0x91, 0xB3}, //VCO_CTRL1 override VCOALC_REF_TX to 3
-{0x92, 0x07}, //VCO_CTRL2 override VCOALC_REF_RX to 3, keep VCO_BUF_BOOST = 1
-{0x8A, 0x71}, //PA_TUNING override PA_COILTUNING to 001 (27 Nov 2012, D. Brown, on behalf of S. Eid)
-{0x79, 0x2F}, //CHF_IBUF Adjust the gm-C filter gain (+/- 6dB) (21 Dec, 2012, on behalf of S. Soca)
-{0x7A, 0x2F}, //CHF_QBUF Adjust the gm-C filter gain (+/- 6dB) (21 Dec, 2012, on behalf of S. Soca)
-{0x7B, 0x24}, //CHF_IRIN Adjust the filter bandwidth (+/- 0.5MHz) (21 Dec, 2012, on behalf of S. Soca)
-{0x7C, 0x24}, //CHF_QRIN Adjust the filter bandwidth (+/- 0.5MHz) (21 Dec, 2012, on behalf of S. Soca)
-{0x7D, 0x24}, //CHF_IL Adjust the filter bandwidth (+/- 0.5MHz) (21 Dec, 2012, on behalf of S. Soca)
-{0x7E, 0x24}, //CHF_QL Adjust the filter bandwidth (+/- 0.5MHz) (21 Dec, 2012, on behalf of S. Soca)
-{0x7F, 0x32}, //CHF_CC1 Adjust the filter center frequency (+/- 1MHz) (21 Dec, 2012, on behalf of S. Soca)
-{0x80, 0x1D}, //CHF_CCL Adjust the filter center frequency (+/- 1MHz) (21 Dec, 2012, on behalf of S. Soca)
-{0x81, 0x2D}, //CHF_CC2 Adjust the filter center frequency (+/- 1MHz) (21 Dec, 2012, on behalf of S. Soca)
-{0x82, 0x24}, //CHF_IROUT Adjust the filter bandwidth (+/- 0.5MHz) (21 Dec, 2012, on behalf of S. Soca)
-{0x83, 0x24}, //CHF_QROUT Adjust the filter bandwidth (+/- 0.5MHz) (21 Dec, 2012, on behalf of S. Soca)
-{0x64, 0x28}, //PA_CAL_DIS=1 Disabled PA calibration
-{0x52, 0x55}, //AGC_THR1 RSSI tune up
-{0x53, 0x2D}, //AGC_THR2 RSSI tune up
-{0x66, 0x5F}, //ATT_RSSI1 tune up
-{0x67, 0x8F}, //ATT_RSSI2 tune up
-{0x68, 0x61}, //RSSI_OFFSET
-{0x78, 0x03} //CHF_PMAGAIN
-};
-
-==VERSION A==
-overwrites_t const overwrites_direct[] ={
-{0x3B, 0x0A} //version 0A: updated registers for CCA
-{0x23, 0x17} //PA_PWR new default Power Step is "23"
-};
-
-overwrites_t const overwrites_indirect[] ={
-{0x31, 0x02}, //clear MISO_HIZ_EN (for single SPI master/slave pair) and SPI_PUL_EN (minimize HIB currents)
-{0x91, 0xB3}, //VCO_CTRL1 override VCOALC_REF_TX to 3
-{0x92, 0x07}, //VCO_CTRL2 override VCOALC_REF_RX to 3, keep VCO_BUF_BOOST = 1
-{0x8A, 0x71}, //PA_TUNING override PA_COILTUNING to 001 (27 Nov 2012, D. Brown, on behalf of S. Eid)
-{0x79, 0x2F}, //CHF_IBUF Adjust the gm-C filter gain (+/- 6dB) (21 Dec, 2012, on behalf of S. Soca)
-{0x7A, 0x2F}, //CHF_QBUF Adjust the gm-C filter gain (+/- 6dB) (21 Dec, 2012, on behalf of S. Soca)
-{0x7B, 0x24}, //CHF_IRIN Adjust the filter bandwidth (+/- 0.5MHz) (21 Dec, 2012, on behalf of S. Soca)
-{0x7C, 0x24}, //CHF_QRIN Adjust the filter bandwidth (+/- 0.5MHz) (21 Dec, 2012, on behalf of S. Soca)
-{0x7D, 0x24}, //CHF_IL Adjust the filter bandwidth (+/- 0.5MHz) (21 Dec, 2012, on behalf of S. Soca)
-{0x7E, 0x24}, //CHF_QL Adjust the filter bandwidth (+/- 0.5MHz) (21 Dec, 2012, on behalf of S. Soca)
-{0x7F, 0x32}, //CHF_CC1 Adjust the filter center frequency (+/- 1MHz) (21 Dec, 2012, on behalf of S. Soca)
-{0x80, 0x1D}, //CHF_CCL Adjust the filter center frequency (+/- 1MHz) (21 Dec, 2012, on behalf of S. Soca)
-{0x81, 0x2D}, //CHF_CC2 Adjust the filter center frequency (+/- 1MHz) (21 Dec, 2012, on behalf of S. Soca)
-{0x82, 0x24}, //CHF_IROUT Adjust the filter bandwidth (+/- 0.5MHz) (21 Dec, 2012, on behalf of S. Soca)
-{0x83, 0x24}, //CHF_QROUT Adjust the filter bandwidth (+/- 0.5MHz) (21 Dec, 2012, on behalf of S. Soca)
-{0x64, 0x28}, //PA_CAL_DIS=1 Disabled PA calibration
-{0x52, 0x55}, //AGC_THR1 RSSI tune up
-{0x53, 0x2D}, //AGC_THR2 RSSI tune up
-{0x66, 0x5F}, //ATT_RSSI1 tune up
-{0x67, 0x8F}, //ATT_RSSI2 tune up
-{0x68, 0x61}, //RSSI_OFFSET
-{0x78, 0x03} //CHF_PMAGAIN
-{0x22, 0x50} //CCA1_THRESH
-};
-
-end of deprecated versions */
-
-
-#endif //OVERWRITES_H_
-
--- a/FSL_IEEE_802_15_4/PHY/MCR20Drv/MCR20Reg.h Fri Jul 31 13:49:46 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,730 +0,0 @@
-/*!
-* Copyright (c) 2015, Freescale Semiconductor, Inc.
-* All rights reserved.
-*
-* \file MCR20reg.h
-* MCR20 Registers
-*
-* Redistribution and use in source and binary forms, with or without modification,
-* are permitted provided that the following conditions are met:
-*
-* o Redistributions of source code must retain the above copyright notice, this list
-* of conditions and the following disclaimer.
-*
-* o Redistributions in binary form must reproduce the above copyright notice, this
-* list of conditions and the following disclaimer in the documentation and/or
-* other materials provided with the distribution.
-*
-* o Neither the name of Freescale Semiconductor, Inc. nor the names of its
-* contributors may be used to endorse or promote products derived from this
-* software without specific prior written permission.
-*
-* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
-* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
-* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-*/
-
-#ifndef __MCR20_REG_H__
-#define __MCR20_REG_H__
-/*****************************************************************************
- * INCLUDED HEADERS *
- *---------------------------------------------------------------------------*
- * Add to this section all the headers that this module needs to include. *
- * Note that it is not a good practice to include header files into header *
- * files, so use this section only if there is no other better solution. *
- *---------------------------------------------------------------------------*
- *****************************************************************************/
-
-/****************************************************************************/
-/* Transceiver SPI Registers */
-/****************************************************************************/
-
-#define TransceiverSPI_IARIndexReg (0x3E)
-
-#define TransceiverSPI_ReadSelect (1<<7)
-#define TransceiverSPI_WriteSelect (0<<7)
-#define TransceiverSPI_RegisterAccessSelect (0<<6)
-#define TransceiverSPI_PacketBuffAccessSelect (1<<6)
-#define TransceiverSPI_PacketBuffBurstModeSelect (0<<5)
-#define TransceiverSPI_PacketBuffByteModeSelect (1<<5)
-
-#define TransceiverSPI_DirectRegisterAddressMask (0x3F)
-
-#define IRQSTS1 0x00
-#define IRQSTS2 0x01
-#define IRQSTS3 0x02
-#define PHY_CTRL1 0x03
-#define PHY_CTRL2 0x04
-#define PHY_CTRL3 0x05
-#define RX_FRM_LEN 0x06
-#define PHY_CTRL4 0x07
-#define SRC_CTRL 0x08
-#define SRC_ADDRS_SUM_LSB 0x09
-#define SRC_ADDRS_SUM_MSB 0x0A
-#define CCA1_ED_FNL 0x0B
-#define EVENT_TMR_LSB 0x0C
-#define EVENT_TMR_MSB 0x0D
-#define EVENT_TMR_USB 0x0E
-#define TIMESTAMP_LSB 0x0F
-#define TIMESTAMP_MSB 0x10
-#define TIMESTAMP_USB 0x11
-#define T3CMP_LSB 0x12
-#define T3CMP_MSB 0x13
-#define T3CMP_USB 0x14
-#define T2PRIMECMP_LSB 0x15
-#define T2PRIMECMP_MSB 0x16
-#define T1CMP_LSB 0x17
-#define T1CMP_MSB 0x18
-#define T1CMP_USB 0x19
-#define T2CMP_LSB 0x1A
-#define T2CMP_MSB 0x1B
-#define T2CMP_USB 0x1C
-#define T4CMP_LSB 0x1D
-#define T4CMP_MSB 0x1E
-#define T4CMP_USB 0x1F
-#define PLL_INT0 0x20
-#define PLL_FRAC0_LSB 0x21
-#define PLL_FRAC0_MSB 0x22
-#define PA_PWR 0x23
-#define SEQ_STATE 0x24
-#define LQI_VALUE 0x25
-#define RSSI_CCA_CONT 0x26
-//-------------- 0x27
-#define ASM_CTRL1 0x28
-#define ASM_CTRL2 0x29
-#define ASM_DATA_0 0x2A
-#define ASM_DATA_1 0x2B
-#define ASM_DATA_2 0x2C
-#define ASM_DATA_3 0x2D
-#define ASM_DATA_4 0x2E
-#define ASM_DATA_5 0x2F
-#define ASM_DATA_6 0x30
-#define ASM_DATA_7 0x31
-#define ASM_DATA_8 0x32
-#define ASM_DATA_9 0x33
-#define ASM_DATA_A 0x34
-#define ASM_DATA_B 0x35
-#define ASM_DATA_C 0x36
-#define ASM_DATA_D 0x37
-#define ASM_DATA_E 0x38
-#define ASM_DATA_F 0x39
-//------------------- 0x3A
-#define OVERWRITE_VER 0x3B
-#define CLK_OUT_CTRL 0x3C
-#define PWR_MODES 0x3D
-#define IAR_INDEX 0x3E
-#define IAR_DATA 0x3F
-
-
-#define PART_ID 0x00
-#define XTAL_TRIM 0x01
-#define PMC_LP_TRIM 0x02
-#define MACPANID0_LSB 0x03
-#define MACPANID0_MSB 0x04
-#define MACSHORTADDRS0_LSB 0x05
-#define MACSHORTADDRS0_MSB 0x06
-#define MACLONGADDRS0_0 0x07
-#define MACLONGADDRS0_8 0x08
-#define MACLONGADDRS0_16 0x09
-#define MACLONGADDRS0_24 0x0A
-#define MACLONGADDRS0_32 0x0B
-#define MACLONGADDRS0_40 0x0C
-#define MACLONGADDRS0_48 0x0D
-#define MACLONGADDRS0_56 0x0E
-#define RX_FRAME_FILTER 0x0F
-#define PLL_INT1 0x10
-#define PLL_FRAC1_LSB 0x11
-#define PLL_FRAC1_MSB 0x12
-#define MACPANID1_LSB 0x13
-#define MACPANID1_MSB 0x14
-#define MACSHORTADDRS1_LSB 0x15
-#define MACSHORTADDRS1_MSB 0x16
-#define MACLONGADDRS1_0 0x17
-#define MACLONGADDRS1_8 0x18
-#define MACLONGADDRS1_16 0x19
-#define MACLONGADDRS1_24 0x1A
-#define MACLONGADDRS1_32 0x1B
-#define MACLONGADDRS1_40 0x1C
-#define MACLONGADDRS1_48 0x1D
-#define MACLONGADDRS1_56 0x1E
-#define DUAL_PAN_CTRL 0x1F
-#define DUAL_PAN_DWELL 0x20
-#define DUAL_PAN_STS 0x21
-#define CCA1_THRESH 0x22
-#define CCA1_ED_OFFSET_COMP 0x23
-#define LQI_OFFSET_COMP 0x24
-#define CCA_CTRL 0x25
-#define CCA2_CORR_PEAKS 0x26
-#define CCA2_CORR_THRESH 0x27
-#define TMR_PRESCALE 0x28
-//---------------- 0x29
-#define GPIO_DATA 0x2A
-#define GPIO_DIR 0x2B
-#define GPIO_PUL_EN 0x2C
-#define GPIO_PUL_SEL 0x2D
-#define GPIO_DS 0x2E
-//-------------- 0x2F
-#define ANT_PAD_CTRL 0x30
-#define MISC_PAD_CTRL 0x31
-#define BSM_CTRL 0x32
-//--------------- 0x33
-#define _RNG 0x34
-#define RX_BYTE_COUNT 0x35
-#define RX_WTR_MARK 0x36
-#define SOFT_RESET 0x37
-#define TXDELAY 0x38
-#define ACKDELAY 0x39
-#define SEQ_MGR_CTRL 0x3A
-#define SEQ_MGR_STS 0x3B
-#define SEQ_T_STS 0x3C
-#define ABORT_STS 0x3D
-#define CCCA_BUSY_CNT 0x3E
-#define SRC_ADDR_CHECKSUM1 0x3F
-#define SRC_ADDR_CHECKSUM2 0x40
-#define SRC_TBL_VALID1 0x41
-#define SRC_TBL_VALID2 0x42
-#define FILTERFAIL_CODE1 0x43
-#define FILTERFAIL_CODE2 0x44
-#define SLOT_PRELOAD 0x45
-//---------------- 0x46
-#define CORR_VT 0x47
-#define SYNC_CTRL 0x48
-#define PN_LSB_0 0x49
-#define PN_LSB_1 0x4A
-#define PN_MSB_0 0x4B
-#define PN_MSB_1 0x4C
-#define CORR_NVAL 0x4D
-#define TX_MODE_CTRL 0x4E
-#define SNF_THR 0x4F
-#define FAD_THR 0x50
-#define ANT_AGC_CTRL 0x51
-#define AGC_THR1 0x52
-#define AGC_THR2 0x53
-#define AGC_HYS 0x54
-#define AFC 0x55
-//--------------- 0x56
-//--------------- 0x57
-#define PHY_STS 0x58
-#define RX_MAX_CORR 0x59
-#define RX_MAX_PREAMBLE 0x5A
-#define RSSI 0x5B
-//--------------- 0x5C
-//--------------- 0x5D
-#define PLL_DIG_CTRL 0x5E
-#define VCO_CAL 0x5F
-#define VCO_BEST_DIFF 0x60
-#define VCO_BIAS 0x61
-#define KMOD_CTRL 0x62
-#define KMOD_CAL 0x63
-#define PA_CAL 0x64
-#define PA_PWRCAL 0x65
-#define ATT_RSSI1 0x66
-#define ATT_RSSI2 0x67
-#define RSSI_OFFSET 0x68
-#define RSSI_SLOPE 0x69
-#define RSSI_CAL1 0x6A
-#define RSSI_CAL2 0x6B
-//--------------- 0x6C
-//--------------- 0x6D
-#define XTAL_CTRL 0x6E
-#define XTAL_COMP_MIN 0x6F
-#define XTAL_COMP_MAX 0x70
-#define XTAL_GM 0x71
-//--------------- 0x72
-//--------------- 0x73
-#define LNA_TUNE 0x74
-#define LNA_AGCGAIN 0x75
-//--------------- 0x76
-//--------------- 0x77
-#define CHF_PMA_GAIN 0x78
-#define CHF_IBUF 0x79
-#define CHF_QBUF 0x7A
-#define CHF_IRIN 0x7B
-#define CHF_QRIN 0x7C
-#define CHF_IL 0x7D
-#define CHF_QL 0x7E
-#define CHF_CC1 0x7F
-#define CHF_CCL 0x80
-#define CHF_CC2 0x81
-#define CHF_IROUT 0x82
-#define CHF_QROUT 0x83
-//--------------- 0x84
-//--------------- 0x85
-#define RSSI_CTRL 0x86
-//--------------- 0x87
-//--------------- 0x88
-#define PA_BIAS 0x89
-#define PA_TUNING 0x8A
-//--------------- 0x8B
-//--------------- 0x8C
-#define PMC_HP_TRIM 0x8D
-#define VREGA_TRIM 0x8E
-//--------------- 0x8F
-//--------------- 0x90
-#define VCO_CTRL1 0x91
-#define VCO_CTRL2 0x92
-//--------------- 0x93
-//--------------- 0x94
-#define ANA_SPARE_OUT1 0x95
-#define ANA_SPARE_OUT2 0x96
-#define ANA_SPARE_IN 0x97
-#define MISCELLANEOUS 0x98
-//--------------- 0x99
-#define SEQ_MGR_OVRD0 0x9A
-#define SEQ_MGR_OVRD1 0x9B
-#define SEQ_MGR_OVRD2 0x9C
-#define SEQ_MGR_OVRD3 0x9D
-#define SEQ_MGR_OVRD4 0x9E
-#define SEQ_MGR_OVRD5 0x9F
-#define SEQ_MGR_OVRD6 0xA0
-#define SEQ_MGR_OVRD7 0xA1
-//--------------- 0xA2
-#define TESTMODE_CTRL 0xA3
-#define DTM_CTRL1 0xA4
-#define DTM_CTRL2 0xA5
-#define ATM_CTRL1 0xA6
-#define ATM_CTRL2 0xA7
-#define ATM_CTRL3 0xA8
-//--------------- 0xA9
-#define LIM_FE_TEST_CTRL 0xAA
-#define CHF_TEST_CTRL 0xAB
-#define VCO_TEST_CTRL 0xAC
-#define PLL_TEST_CTRL 0xAD
-#define PA_TEST_CTRL 0xAE
-#define PMC_TEST_CTRL 0xAF
-#define SCAN_DTM_PROTECT_1 0xFE
-#define SCAN_DTM_PROTECT_0 0xFF
-
-// IRQSTS1 bits
-#define cIRQSTS1_RX_FRM_PEND (1<<7)
-#define cIRQSTS1_PLL_UNLOCK_IRQ (1<<6)
-#define cIRQSTS1_FILTERFAIL_IRQ (1<<5)
-#define cIRQSTS1_RXWTRMRKIRQ (1<<4)
-#define cIRQSTS1_CCAIRQ (1<<3)
-#define cIRQSTS1_RXIRQ (1<<2)
-#define cIRQSTS1_TXIRQ (1<<1)
-#define cIRQSTS1_SEQIRQ (1<<0)
-
-typedef union regIRQSTS1_tag{
- uint8_t byte;
- struct{
- uint8_t SEQIRQ:1;
- uint8_t TXIRQ:1;
- uint8_t RXIRQ:1;
- uint8_t CCAIRQ:1;
- uint8_t RXWTRMRKIRQ:1;
- uint8_t FILTERFAIL_IRQ:1;
- uint8_t PLL_UNLOCK_IRQ:1;
- uint8_t RX_FRM_PEND:1;
- }bit;
-} regIRQSTS1_t;
-
-// IRQSTS2 bits
-#define cIRQSTS2_CRCVALID (1<<7)
-#define cIRQSTS2_CCA (1<<6)
-#define cIRQSTS2_SRCADDR (1<<5)
-#define cIRQSTS2_PI (1<<4)
-#define cIRQSTS2_TMRSTATUS (1<<3)
-#define cIRQSTS2_ASM_IRQ (1<<2)
-#define cIRQSTS2_PB_ERR_IRQ (1<<1)
-#define cIRQSTS2_WAKE_IRQ (1<<0)
-
-typedef union regIRQSTS2_tag{
- uint8_t byte;
- struct{
- uint8_t WAKE_IRQ:1;
- uint8_t PB_ERR_IRQ:1;
- uint8_t ASM_IRQ:1;
- uint8_t TMRSTATUS:1;
- uint8_t PI:1;
- uint8_t SRCADDR:1;
- uint8_t CCA:1;
- uint8_t CRCVALID:1;
- }bit;
-} regIRQSTS2_t;
-
-// IRQSTS3 bits
-#define cIRQSTS3_TMR4MSK (1<<7)
-#define cIRQSTS3_TMR3MSK (1<<6)
-#define cIRQSTS3_TMR2MSK (1<<5)
-#define cIRQSTS3_TMR1MSK (1<<4)
-#define cIRQSTS3_TMR4IRQ (1<<3)
-#define cIRQSTS3_TMR3IRQ (1<<2)
-#define cIRQSTS3_TMR2IRQ (1<<1)
-#define cIRQSTS3_TMR1IRQ (1<<0)
-
-typedef union regIRQSTS3_tag{
- uint8_t byte;
- struct{
- uint8_t TMR1IRQ:1;
- uint8_t TMR2IRQ:1;
- uint8_t TMR3IRQ:1;
- uint8_t TMR4IRQ:1;
- uint8_t TMR1MSK:1;
- uint8_t TMR2MSK:1;
- uint8_t TMR3MSK:1;
- uint8_t TMR4MSK:1;
- }bit;
-} regIRQSTS3_t;
-
-// PHY_CTRL1 bits
-#define cPHY_CTRL1_TMRTRIGEN (1<<7)
-#define cPHY_CTRL1_SLOTTED (1<<6)
-#define cPHY_CTRL1_CCABFRTX (1<<5)
-#define cPHY_CTRL1_RXACKRQD (1<<4)
-#define cPHY_CTRL1_AUTOACK (1<<3)
-#define cPHY_CTRL1_XCVSEQ (7<<0)
-
-typedef union regPHY_CTRL1_tag{
- uint8_t byte;
- struct{
- uint8_t XCVSEQ:3;
- uint8_t AUTOACK:1;
- uint8_t RXACKRQD:1;
- uint8_t CCABFRTX:1;
- uint8_t SLOTTED:1;
- uint8_t TMRTRIGEN:1;
- }bit;
-} regPHY_CTRL1_t;
-
-// PHY_CTRL2 bits
-#define cPHY_CTRL2_CRC_MSK (1<<7)
-#define cPHY_CTRL2_PLL_UNLOCK_MSK (1<<6)
-#define cPHY_CTRL2_FILTERFAIL_MSK (1<<5)
-#define cPHY_CTRL2_RX_WMRK_MSK (1<<4)
-#define cPHY_CTRL2_CCAMSK (1<<3)
-#define cPHY_CTRL2_RXMSK (1<<2)
-#define cPHY_CTRL2_TXMSK (1<<1)
-#define cPHY_CTRL2_SEQMSK (1<<0)
-
-typedef union regPHY_CTRL2_tag{
- uint8_t byte;
- struct{
- uint8_t SEQMSK:1;
- uint8_t TXMSK:1;
- uint8_t RXMSK:1;
- uint8_t CCAMSK:1;
- uint8_t RX_WMRK_MSK:1;
- uint8_t FILTERFAIL_MSK:1;
- uint8_t PLL_UNLOCK_MSK:1;
- uint8_t CRC_MSK:1;
- }bit;
-} regPHY_CTRL2_t;
-
-// PHY_CTRL3 bits
-#define cPHY_CTRL3_TMR4CMP_EN (1<<7)
-#define cPHY_CTRL3_TMR3CMP_EN (1<<6)
-#define cPHY_CTRL3_TMR2CMP_EN (1<<5)
-#define cPHY_CTRL3_TMR1CMP_EN (1<<4)
-#define cPHY_CTRL3_ASM_MSK (1<<2)
-#define cPHY_CTRL3_PB_ERR_MSK (1<<1)
-#define cPHY_CTRL3_WAKE_MSK (1<<0)
-
-typedef union regPHY_CTRL3_tag{
- uint8_t byte;
- struct{
- uint8_t WAKE_MSK:1;
- uint8_t PB_ERR_MSK:1;
- uint8_t ASM_MSK:1;
- uint8_t RESERVED:1;
- uint8_t TMR1CMP_EN:1;
- uint8_t TMR2CMP_EN:1;
- uint8_t TMR3CMP_EN:1;
- uint8_t TMR4CMP_EN:1;
- }bit;
-} regPHY_CTRL3_t;
-
-// RX_FRM_LEN bits
-#define cRX_FRAME_LENGTH (0x7F)
-
-// PHY_CTRL4 bits
-#define cPHY_CTRL4_TRCV_MSK (1<<7)
-#define cPHY_CTRL4_TC3TMOUT (1<<6)
-#define cPHY_CTRL4_PANCORDNTR0 (1<<5)
-#define cPHY_CTRL4_CCATYPE (3<<0)
-#define cPHY_CTRL4_CCATYPE_Shift_c (3)
-#define cPHY_CTRL4_TMRLOAD (1<<2)
-#define cPHY_CTRL4_PROMISCUOUS (1<<1)
-#define cPHY_CTRL4_TC2PRIME_EN (1<<0)
-
-typedef union regPHY_CTRL4_tag{
- uint8_t byte;
- struct{
- uint8_t TC2PRIME_EN:1;
- uint8_t PROMISCUOUS:1;
- uint8_t TMRLOAD:1;
- uint8_t CCATYPE:2;
- uint8_t PANCORDNTR0:1;
- uint8_t TC3TMOUT:1;
- uint8_t TRCV_MSK:1;
- }bit;
-} regPHY_CTRL4_t;
-
-// SRC_CTRL bits
-#define cSRC_CTRL_INDEX (0x0F)
-#define cSRC_CTRL_INDEX_Shift_c (4)
-#define cSRC_CTRL_ACK_FRM_PND (1<<3)
-#define cSRC_CTRL_SRCADDR_EN (1<<2)
-#define cSRC_CTRL_INDEX_EN (1<<1)
-#define cSRC_CTRL_INDEX_DISABLE (1<<0)
-
-typedef union regSRC_CTRL_tag{
- uint8_t byte;
- struct{
- uint8_t INDEX_DISABLE:1;
- uint8_t INDEX_EN:1;
- uint8_t SRCADDR_EN:1;
- uint8_t ACK_FRM_PND:1;
- uint8_t INDEX:4;
- }bit;
-} regSRC_CTRL_t;
-
-// ASM_CTRL1 bits
-#define cASM_CTRL1_CLEAR (1<<7)
-#define cASM_CTRL1_START (1<<6)
-#define cASM_CTRL1_SELFTST (1<<5)
-#define cASM_CTRL1_CTR (1<<4)
-#define cASM_CTRL1_CBC (1<<3)
-#define cASM_CTRL1_AES (1<<2)
-#define cASM_CTRL1_LOAD_MAC (1<<1)
-
-// ASM_CTRL2 bits
-#define cASM_CTRL2_DATA_REG_TYPE_SEL (7)
-#define cASM_CTRL2_DATA_REG_TYPE_SEL_Shift_c (5)
-#define cASM_CTRL2_TSTPAS (1<<1)
-
-// CLK_OUT_CTRL bits
-#define cCLK_OUT_CTRL_EXTEND (1<<7)
-#define cCLK_OUT_CTRL_HIZ (1<<6)
-#define cCLK_OUT_CTRL_SR (1<<5)
-#define cCLK_OUT_CTRL_DS (1<<4)
-#define cCLK_OUT_CTRL_EN (1<<3)
-#define cCLK_OUT_CTRL_DIV (7)
-
-// PWR_MODES bits
-#define cPWR_MODES_XTAL_READY (1<<5)
-#define cPWR_MODES_XTALEN (1<<4)
-#define cPWR_MODES_ASM_CLK_EN (1<<3)
-#define cPWR_MODES_AUTODOZE (1<<1)
-#define cPWR_MODES_PMC_MODE (1<<0)
-
-// RX_FRAME_FILTER bits
-#define cRX_FRAME_FLT_FRM_VER (0xC0)
-#define cRX_FRAME_FLT_FRM_VER_Shift_c (6)
-#define cRX_FRAME_FLT_ACTIVE_PROMISCUOUS (1<<5)
-#define cRX_FRAME_FLT_NS_FT (1<<4)
-#define cRX_FRAME_FLT_CMD_FT (1<<3)
-#define cRX_FRAME_FLT_ACK_FT (1<<2)
-#define cRX_FRAME_FLT_DATA_FT (1<<1)
-#define cRX_FRAME_FLT_BEACON_FT (1<<0)
-
-typedef union regRX_FRAME_FILTER_tag{
- uint8_t byte;
- struct{
- uint8_t FRAME_FLT_BEACON_FT:1;
- uint8_t FRAME_FLT_DATA_FT:1;
- uint8_t FRAME_FLT_ACK_FT:1;
- uint8_t FRAME_FLT_CMD_FT:1;
- uint8_t FRAME_FLT_NS_FT:1;
- uint8_t FRAME_FLT_ACTIVE_PROMISCUOUS:1;
- uint8_t FRAME_FLT_FRM_VER:2;
- }bit;
-} regRX_FRAME_FILTER_t;
-
-// DUAL_PAN_CTRL bits
-#define cDUAL_PAN_CTRL_DUAL_PAN_SAM_LVL_MSK (0xF0)
-#define cDUAL_PAN_CTRL_DUAL_PAN_SAM_LVL_Shift_c (4)
-#define cDUAL_PAN_CTRL_CURRENT_NETWORK (1<<3)
-#define cDUAL_PAN_CTRL_PANCORDNTR1 (1<<2)
-#define cDUAL_PAN_CTRL_DUAL_PAN_AUTO (1<<1)
-#define cDUAL_PAN_CTRL_ACTIVE_NETWORK (1<<0)
-
-// DUAL_PAN_STS bits
-#define cDUAL_PAN_STS_RECD_ON_PAN1 (1<<7)
-#define cDUAL_PAN_STS_RECD_ON_PAN0 (1<<6)
-#define cDUAL_PAN_STS_DUAL_PAN_REMAIN (0x3F)
-
-// CCA_CTRL bits
-#define cCCA_CTRL_AGC_FRZ_EN (1<<6)
-#define cCCA_CTRL_CONT_RSSI_EN (1<<5)
-#define cCCA_CTRL_LQI_RSSI_NOT_CORR (1<<4)
-#define cCCA_CTRL_CCA3_AND_NOT_OR (1<<3)
-#define cCCA_CTRL_POWER_COMP_EN_LQI (1<<2)
-#define cCCA_CTRL_POWER_COMP_EN_ED (1<<1)
-#define cCCA_CTRL_POWER_COMP_EN_CCA1 (1<<0)
-
-// GPIO_DATA bits
-#define cGPIO_DATA_7 (1<<7)
-#define cGPIO_DATA_6 (1<<6)
-#define cGPIO_DATA_5 (1<<5)
-#define cGPIO_DATA_4 (1<<4)
-#define cGPIO_DATA_3 (1<<3)
-#define cGPIO_DATA_2 (1<<2)
-#define cGPIO_DATA_1 (1<<1)
-#define cGPIO_DATA_0 (1<<0)
-
-// GPIO_DIR bits
-#define cGPIO_DIR_7 (1<<7)
-#define cGPIO_DIR_6 (1<<6)
-#define cGPIO_DIR_5 (1<<5)
-#define cGPIO_DIR_4 (1<<4)
-#define cGPIO_DIR_3 (1<<3)
-#define cGPIO_DIR_2 (1<<2)
-#define cGPIO_DIR_1 (1<<1)
-#define cGPIO_DIR_0 (1<<0)
-
-// GPIO_PUL_EN bits
-#define cGPIO_PUL_EN_7 (1<<7)
-#define cGPIO_PUL_EN_6 (1<<6)
-#define cGPIO_PUL_EN_5 (1<<5)
-#define cGPIO_PUL_EN_4 (1<<4)
-#define cGPIO_PUL_EN_3 (1<<3)
-#define cGPIO_PUL_EN_2 (1<<2)
-#define cGPIO_PUL_EN_1 (1<<1)
-#define cGPIO_PUL_EN_0 (1<<0)
-
-// GPIO_PUL_SEL bits
-#define cGPIO_PUL_SEL_7 (1<<7)
-#define cGPIO_PUL_SEL_6 (1<<6)
-#define cGPIO_PUL_SEL_5 (1<<5)
-#define cGPIO_PUL_SEL_4 (1<<4)
-#define cGPIO_PUL_SEL_3 (1<<3)
-#define cGPIO_PUL_SEL_2 (1<<2)
-#define cGPIO_PUL_SEL_1 (1<<1)
-#define cGPIO_PUL_SEL_0 (1<<0)
-
-// GPIO_DS bits
-#define cGPIO_DS_7 (1<<7)
-#define cGPIO_DS_6 (1<<6)
-#define cGPIO_DS_5 (1<<5)
-#define cGPIO_DS_4 (1<<4)
-#define cGPIO_DS_3 (1<<3)
-#define cGPIO_DS_2 (1<<2)
-#define cGPIO_DS_1 (1<<1)
-#define cGPIO_DS_0 (1<<0)
-
-// SPI_CTRL bits
-//#define cSPI_CTRL_MISO_HIZ_EN (1<<1)
-//#define cSPI_CTRL_PB_PROTECT (1<<0)
-
-// ANT_PAD_CTRL bits
-#define cANT_PAD_CTRL_ANTX_POL (0x0F)
-#define cANT_PAD_CTRL_ANTX_POL_Shift_c (4)
-#define cANT_PAD_CTRL_ANTX_CTRLMODE (1<<3)
-#define cANT_PAD_CTRL_ANTX_HZ (1<<2)
-#define cANT_PAD_CTRL_ANTX_EN (3)
-
-// MISC_PAD_CTRL bits
-#define cMISC_PAD_CTRL_MISO_HIZ_EN (1<<3)
-#define cMISC_PAD_CTRL_IRQ_B_OD (1<<2)
-#define cMISC_PAD_CTRL_NON_GPIO_DS (1<<1)
-#define cMISC_PAD_CTRL_ANTX_CURR (1<<0)
-
-// ANT_AGC_CTRL bits
-#define cANT_AGC_CTRL_FAD_EN_Shift_c (0)
-#define cANT_AGC_CTRL_FAD_EN_Mask_c (1<<cANT_AGC_CTRL_FAD_EN_Shift_c)
-#define cANT_AGC_CTRL_ANTX_Shift_c (1)
-#define cANT_AGC_CTRL_ANTX_Mask_c (1<<cANT_AGC_CTRL_ANTX_Shift_c)
-
-// BSM_CTRL bits
-#define cBSM_CTRL_BSM_EN (1<<0)
-
-// SOFT_RESET bits
-#define cSOFT_RESET_SOG_RST (1<<7)
-#define cSOFT_RESET_REGS_RST (1<<4)
-#define cSOFT_RESET_PLL_RST (1<<3)
-#define cSOFT_RESET_TX_RST (1<<2)
-#define cSOFT_RESET_RX_RST (1<<1)
-#define cSOFT_RESET_SEQ_MGR_RST (1<<0)
-
-// SEQ_MGR_CTRL bits
-#define cSEQ_MGR_CTRL_SEQ_STATE_CTRL (3)
-#define cSEQ_MGR_CTRL_SEQ_STATE_CTRL_Shift_c (6)
-#define cSEQ_MGR_CTRL_NO_RX_RECYCLE (1<<5)
-#define cSEQ_MGR_CTRL_LATCH_PREAMBLE (1<<4)
-#define cSEQ_MGR_CTRL_EVENT_TMR_DO_NOT_LATCH (1<<3)
-#define cSEQ_MGR_CTRL_CLR_NEW_SEQ_INHIBIT (1<<2)
-#define cSEQ_MGR_CTRL_PSM_LOCK_DIS (1<<1)
-#define cSEQ_MGR_CTRL_PLL_ABORT_OVRD (1<<0)
-
-// SEQ_MGR_STS bits
-#define cSEQ_MGR_STS_TMR2_SEQ_TRIG_ARMED (1<<7)
-#define cSEQ_MGR_STS_RX_MODE (1<<6)
-#define cSEQ_MGR_STS_RX_TIMEOUT_PENDING (1<<5)
-#define cSEQ_MGR_STS_NEW_SEQ_INHIBIT (1<<4)
-#define cSEQ_MGR_STS_SEQ_IDLE (1<<3)
-#define cSEQ_MGR_STS_XCVSEQ_ACTUAL (7)
-
-// ABORT_STS bits
-#define cABORT_STS_PLL_ABORTED (1<<2)
-#define cABORT_STS_TC3_ABORTED (1<<1)
-#define cABORT_STS_SW_ABORTED (1<<0)
-
-// FILTERFAIL_CODE2 bits
-#define cFILTERFAIL_CODE2_PAN_SEL (1<<7)
-#define cFILTERFAIL_CODE2_9_8 (3)
-
-// PHY_STS bits
-#define cPHY_STS_PLL_UNLOCK (1<<7)
-#define cPHY_STS_PLL_LOCK_ERR (1<<6)
-#define cPHY_STS_PLL_LOCK (1<<5)
-#define cPHY_STS_CRCVALID (1<<3)
-#define cPHY_STS_FILTERFAIL_FLAG_SEL (1<<2)
-#define cPHY_STS_SFD_DET (1<<1)
-#define cPHY_STS_PREAMBLE_DET (1<<0)
-
-// TESTMODE_CTRL bits
-#define cTEST_MODE_CTRL_HOT_ANT (1<<4)
-#define cTEST_MODE_CTRL_IDEAL_RSSI_EN (1<<3)
-#define cTEST_MODE_CTRL_IDEAL_PFC_EN (1<<2)
-#define cTEST_MODE_CTRL_CONTINUOUS_EN (1<<1)
-#define cTEST_MODE_CTRL_FPGA_EN (1<<0)
-
-// DTM_CTRL1 bits
-#define cDTM_CTRL1_ATM_LOCKED (1<<7)
-#define cDTM_CTRL1_DTM_EN (1<<6)
-#define cDTM_CTRL1_PAGE5 (1<<5)
-#define cDTM_CTRL1_PAGE4 (1<<4)
-#define cDTM_CTRL1_PAGE3 (1<<3)
-#define cDTM_CTRL1_PAGE2 (1<<2)
-#define cDTM_CTRL1_PAGE1 (1<<1)
-#define cDTM_CTRL1_PAGE0 (1<<0)
-
-// TX_MODE_CTRL
-#define cTX_MODE_CTRL_TX_INV (1<<4)
-#define cTX_MODE_CTRL_BT_EN (1<<3)
-#define cTX_MODE_CTRL_DTS2 (1<<2)
-#define cTX_MODE_CTRL_DTS1 (1<<1)
-#define cTX_MODE_CTRL_DTS0 (1<<0)
-
-#define cTX_MODE_CTRL_DTS_MASK (7)
-
-// CLK_OUT_CTRL bits
-#define cCLK_OUT_EXTEND (1<<7)
-#define cCLK_OUT_HIZ (1<<6)
-#define cCLK_OUT_SR (1<<5)
-#define cCLK_OUT_DS (1<<4)
-#define cCLK_OUT_EN (1<<3)
-#define cCLK_OUT_DIV_Mask (7<<0)
-
-#define gCLK_OUT_FREQ_32_MHz (0)
-#define gCLK_OUT_FREQ_16_MHz (1)
-#define gCLK_OUT_FREQ_8_MHz (2)
-#define gCLK_OUT_FREQ_4_MHz (3)
-#define gCLK_OUT_FREQ_1_MHz (4)
-#define gCLK_OUT_FREQ_250_KHz (5)
-#define gCLK_OUT_FREQ_62_5_KHz (6)
-#define gCLK_OUT_FREQ_32_78_KHz (7)
-#define gCLK_OUT_FREQ_DISABLE (8)
-
-
-
-
-#endif /* __MCR20_REG_H__ */
--- a/FSL_IEEE_802_15_4/PHY/MCR20Drv/XcvrSpi.cpp Fri Jul 31 13:49:46 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,159 +0,0 @@
-/*!
-* Copyright (c) 2015, Freescale Semiconductor, Inc.
-* All rights reserved.
-*
-* \file XcvrSpi.c
-*
-* Redistribution and use in source and binary forms, with or without modification,
-* are permitted provided that the following conditions are met:
-*
-* o Redistributions of source code must retain the above copyright notice, this list
-* of conditions and the following disclaimer.
-*
-* o Redistributions in binary form must reproduce the above copyright notice, this
-* list of conditions and the following disclaimer in the documentation and/or
-* other materials provided with the distribution.
-*
-* o Neither the name of Freescale Semiconductor, Inc. nor the names of its
-* contributors may be used to endorse or promote products derived from this
-* software without specific prior written permission.
-*
-* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
-* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
-* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-*/
-
-
-/*****************************************************************************
-* INCLUDED HEADERS *
-*---------------------------------------------------------------------------*
-* Add to this section all the headers that this module needs to include. *
-* Note that it is not a good practice to include header files into header *
-* files, so use this section only if there is no other better solution. *
-*---------------------------------------------------------------------------*
-*****************************************************************************/
-
-#include "mbed.h"
-#include "EmbeddedTypes.h"
-
-#if defined(TARGET_K64F)
- SPI spi(PTD2, PTD3, PTD1);
-#elif defined(TARGET_NUCLEO_F401RE)
- SPI spi(SPI_MOSI, SPI_MISO, SPI_SCK);
-#else
- "SPI not defined for this platform"
-#endif
-
-DigitalOut RF_CS(D10);
-DigitalOut RF_RST(D5);
-DigitalOut RF_SLP_TR(D7); // Not used in FSL
-InterruptIn RF_IRQ (D2); // FSL //(D9); // Atmel Radio
-DigitalIn RF_IRQ_PIN (D2);
-
-extern "C" void PHY_InterruptHandler(void);
-
-extern "C" void RF_IRQ_Init(void) {
- RF_IRQ.mode(PullUp);
- RF_IRQ.fall(&PHY_InterruptHandler);
-}
-
-extern "C" void RF_IRQ_Enable(void) {
- RF_IRQ.enable_irq();
-}
-extern "C" void RF_IRQ_Disable(void) {
- RF_IRQ.disable_irq();
-}
-
-extern "C" bool_t RF_isIRQ_Pending(void) {
- return !RF_IRQ_PIN.read();
-}
-
-extern "C" void RF_RST_Set(int state) {
- RF_RST = state;
-}
-
-extern "C" void RF_SLP_TR_Set(int state) {
- RF_SLP_TR = state;
-}
-
-extern "C" void RF_CS_while_active(void) {
-
- while(!RF_CS);
-}
-
-/*****************************************************************************
-* PRIVATE MACROS *
-*---------------------------------------------------------------------------*
-* Add to this section all the access macros, registers mappings, bit access *
-* macros, masks, flags etc ...
-*---------------------------------------------------------------------------*
-*****************************************************************************/
-
-/*****************************************************************************/
-/*****************************************************************************/
-extern "C" void spi_master_init(uint32_t instance)
-{
-
-}
-
-/*****************************************************************************/
-/*****************************************************************************/
-extern "C" void spi_master_configure_speed(uint32_t instance, uint32_t freq)
-{
- //spi.frequency(8000000);
- spi.frequency(freq);
-}
-
-/*****************************************************************************/
-/*****************************************************************************/
-extern "C" void spi_master_transfer(uint32_t instance,
- uint8_t * sendBuffer,
- uint8_t * receiveBuffer,
- size_t transferByteCount)
-{
- volatile uint8_t dummy;
-
- if( !transferByteCount )
- return;
-
- if( !sendBuffer && !receiveBuffer )
- return;
-
- while( transferByteCount-- )
- {
- if( sendBuffer )
- {
- dummy = *sendBuffer;
- sendBuffer++;
- }
- else
- {
- dummy = 0xFF;
- }
-
- dummy = spi.write(dummy);
-
- if( receiveBuffer )
- {
- *receiveBuffer = dummy;
- receiveBuffer++;
- }
- }
-}
-
-extern "C" void gXcvrAssertCS_d(void)
-{
- RF_CS = 0;
-}
-
-extern "C" void gXcvrDeassertCS_d(void)
-{
- RF_CS = 1;
-}
--- a/FSL_IEEE_802_15_4/PHY/MCR20Drv/XcvrSpi.h Fri Jul 31 13:49:46 2015 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,88 +0,0 @@ -/*! -* Copyright (c) 2015, Freescale Semiconductor, Inc. -* All rights reserved. -* -* \file XcvrSpi.h -* -* Redistribution and use in source and binary forms, with or without modification, -* are permitted provided that the following conditions are met: -* -* o Redistributions of source code must retain the above copyright notice, this list -* of conditions and the following disclaimer. -* -* o Redistributions in binary form must reproduce the above copyright notice, this -* list of conditions and the following disclaimer in the documentation and/or -* other materials provided with the distribution. -* -* o Neither the name of Freescale Semiconductor, Inc. nor the names of its -* contributors may be used to endorse or promote products derived from this -* software without specific prior written permission. -* -* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR -* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -*/ - -#ifndef __XCVR_SPI_H__ -#define __XCVR_SPI_H__ - - -/***************************************************************************** - * INCLUDED HEADERS * - *---------------------------------------------------------------------------* - * Add to this section all the headers that this module needs to include. * - * Note that it is not a good practice to include header files into header * - * files, so use this section only if there is no other better solution. * - *---------------------------------------------------------------------------* - *****************************************************************************/ - -#include "EmbeddedTypes.h" -//#include "board.h" - - -/***************************************************************************** - * PUBLIC MACROS * - *---------------------------------------------------------------------------* - * Add to this section all the access macros, registers mappings, bit access * - * macros, masks, flags etc ... - *---------------------------------------------------------------------------* - *****************************************************************************/ -//#define gXcvrAssertCS_d() GPIO_DRV_ClearPinOutput(kGpioXcvrSpiCsPin) -//#define gXcvrDeassertCS_d() GPIO_DRV_SetPinOutput(kGpioXcvrSpiCsPin) - -#define gXcvrSpiInstance_c 0 - -/***************************************************************************** - * PUBLIC FUNCTIONS * - *---------------------------------------------------------------------------* - * Add to this section all the global functions prototype preceded (as a * - * good practice) by the keyword 'extern' * - *---------------------------------------------------------------------------* - *****************************************************************************/ -void RF_RST_Set(int state); -void RF_SLP_TR_Set(int state); -void RF_CS_while_active(void); -void RF_CS_Set(int state); -void RF_IRQ_Init(void); -void RF_IRQ_Disable(void); -void RF_IRQ_Enable(void); -bool_t RF_isIRQ_Pending(void); - -void gXcvrAssertCS_d(void); -void gXcvrDeassertCS_d(void); - -void spi_master_init(uint32_t instance); -void spi_master_configure_speed(uint32_t instance, uint32_t freq); -void spi_master_transfer(uint32_t instance, - uint8_t * sendBuffer, - uint8_t * receiveBuffer, - uint32_t transferByteCount); - -#endif /* __XCVR_SPI_H__ */
--- a/FSL_IEEE_802_15_4/PHY/MPM.c Fri Jul 31 13:49:46 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,555 +0,0 @@
-/*!
-* Copyright (c) 2015, Freescale Semiconductor, Inc.
-* All rights reserved.
-*
-* \file MPM.c
-* This is the source file for the Multiple PAN Manager.
-*
-* Redistribution and use in source and binary forms, with or without modification,
-* are permitted provided that the following conditions are met:
-*
-* o Redistributions of source code must retain the above copyright notice, this list
-* of conditions and the following disclaimer.
-*
-* o Redistributions in binary form must reproduce the above copyright notice, this
-* list of conditions and the following disclaimer in the documentation and/or
-* other materials provided with the distribution.
-*
-* o Neither the name of Freescale Semiconductor, Inc. nor the names of its
-* contributors may be used to endorse or promote products derived from this
-* software without specific prior written permission.
-*
-* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
-* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
-* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-*/
-
-/************************************************************************************
-*************************************************************************************
-* Include
-*************************************************************************************
-************************************************************************************/
-
-#include "EmbeddedTypes.h"
-#include "MpmInterface.h"
-#include "Phy.h"
-
-#if 0
-#include "FunctionLib.h"
-#include "MemManager.h"
-#include "Panic.h"
-#endif
-
-#if gMpmIncluded_d
-
-/************************************************************************************
-*************************************************************************************
-* Public macros
-*************************************************************************************
-************************************************************************************/
-
-/************************************************************************************
-*************************************************************************************
-* Public type definitions
-*************************************************************************************
-************************************************************************************/
-
-/************************************************************************************
-*************************************************************************************
-* Private memory declarations
-*************************************************************************************
-************************************************************************************/
-uint8_t mRegisteredPANs;
-bool_t mMpmExclusiveAccess;
-panInfo_t mPanInfo[gMpmMaxPANs_c];
-panInfo_t *pActivePANs[gMpmPhyPanRegSets_c];
-
-/************************************************************************************
-*************************************************************************************
-* Private functions prototypes
-*************************************************************************************
-************************************************************************************/
-static void MPM_SetPanSettingsInPhy( uint8_t panIndex );
-static uint8_t MPM_AllocateResource( bool_t force, uint8_t panIdx );
-
-/************************************************************************************
-*************************************************************************************
-* Public functions
-*************************************************************************************
-************************************************************************************/
-
-/*! *********************************************************************************
-* \brief This function determines the instance of the MAC associated with a PHY regSet
-*
-* \param[in] regSet The PHY registry set
-*
-* \return The instance of the MAC associated with a PHY registry set.
-*
-********************************************************************************** */
-uint32_t MPM_GetMacInstanceFromRegSet(uint32_t regSet)
-{
- if( pActivePANs[regSet] )
- return pActivePANs[regSet]->macInstance;
-
- return 0;
-}
-
-/*! *********************************************************************************
-* \brief This function determines the PHY regSet for the specified panIndex
-*
-* \param[in] panIdx The index in mPanInfo[] table
-*
-* \return The PHY registry set.
-*
-********************************************************************************** */
-uint32_t MPM_GetRegSet( uint8_t panIdx )
-{
- return mPanInfo[panIdx].phyRegSet;
-}
-
-/*! *********************************************************************************
-* \brief This function determines the PHY regSet for the specified panIndex
-*
-* \param[in] pibId The id of the PHY PIB
-* \param[in] pValue The value of the PHY PIB
-* \param[in] panIdx The index in mPanInfo[] table
-*
-* \return The status of the operation.
-*
-********************************************************************************** */
-phyStatus_t MPM_SetPIB(phyPibId_t pibId, void* pValue, uint8_t panIdx)
-{
- switch(pibId)
- {
-#if gMpmUseDifferentTxPwrLevel_c
- case gPhyPibTransmitPower_c:
- if( (*(uint8_t*)pValue < 3) || (*(uint8_t*)pValue > 31) )
- {
- return gPhyInvalidParameter_c;
- }
- mPanInfo[panIdx].pwrLevel = *(uint8_t*)pValue;
- break;
-#endif
-#if (gMpmMaxPANs_c > gMpmPhyPanRegSets_c)
- case gPhyPibCurrentChannel_c:
- if( (*(uint8_t*)pValue < 11) || (*(uint8_t*)pValue > 26) )
- {
- return gPhyInvalidParameter_c;
- }
- mPanInfo[panIdx].channel = *(uint8_t*)pValue;
- break;
- case gPhyPibLongAddress_c:
- mPanInfo[panIdx].longAddr = *(uint64_t*)pValue;
- break;
- case gPhyPibShortAddress_c:
- mPanInfo[panIdx].shortAddr = *(uint16_t*)pValue;
- break;
- case gPhyPibPanId_c:
- mPanInfo[panIdx].panId = *(uint16_t*)pValue;
- break;
- case gPhyPibPanCoordinator_c:
- if( *(bool_t*)pValue )
- mPanInfo[panIdx].flags |= gMpmFlagPanCoord_c;
- else
- mPanInfo[panIdx].flags &= ~gMpmFlagPanCoord_c;
- break;
-#endif
- case gPhyPibRxOnWhenIdle:
- if( *(bool_t*)pValue )
- mPanInfo[panIdx].flags |= gMpmFlagRxOnWhenIdle_c;
- else
- mPanInfo[panIdx].flags &= ~gMpmFlagRxOnWhenIdle_c;
- break;
- case gPhyPibPromiscuousMode_c:
- if( *(bool_t*)pValue )
- mPanInfo[panIdx].flags |= gMpmFlagPromiscuous_c;
- else
- mPanInfo[panIdx].flags &= ~gMpmFlagPromiscuous_c;
- break;
- default:
- return gPhyUnsupportedAttribute_c;
- }
-
- return gPhySuccess_c;
-}
-
-phyStatus_t MPM_GetPIB(phyPibId_t pibId, void *pValue, uint8_t panIdx)
-{
- switch(pibId)
- {
-#if gMpmUseDifferentTxPwrLevel_c
- case gPhyPibTransmitPower_c:
- *(uint8_t*)pValue = mPanInfo[panIdx].pwrLevel;
- break;
-#endif
-#if (gMpmMaxPANs_c > gMpmPhyPanRegSets_c)
- case gPhyPibCurrentChannel_c:
- *(uint8_t*)pValue = mPanInfo[panIdx].channel;
- break;
- case gPhyPibLongAddress_c:
- *(uint64_t*)pValue = mPanInfo[panIdx].longAddr;
- break;
- case gPhyPibShortAddress_c:
- *(uint16_t*)pValue = mPanInfo[panIdx].shortAddr;
- break;
- case gPhyPibPanId_c:
- *(uint16_t*)pValue = mPanInfo[panIdx].panId;
- break;
- case gPhyPibPanCoordinator_c:
- *(uint8_t*)pValue = !!(mPanInfo[panIdx].flags & gMpmFlagPanCoord_c);
- break;
-#endif
- case gPhyPibRxOnWhenIdle:
- *(uint8_t*)pValue = !!(mPanInfo[panIdx].flags & gMpmFlagRxOnWhenIdle_c);
- break;
- case gPhyPibPromiscuousMode_c:
- *(uint8_t*)pValue = !!(mPanInfo[panIdx].flags & gMpmFlagPromiscuous_c);
- break;
- default:
- return gPhyUnsupportedAttribute_c;
- }
-
- return gPhySuccess_c;
-}
-
-
-/*! *********************************************************************************
-* \brief This function initializes the MPM module.
-*
-* \param[in] None.
-*
-* \return None
-*
-********************************************************************************** */
-void MPM_Init( void )
-{
- uint32_t i;
-
- mRegisteredPANs = 0;
- mMpmExclusiveAccess = FALSE;
- FLib_MemSet( mPanInfo, 0x00, sizeof(mPanInfo) );
- FLib_MemSet( pActivePANs, 0x00, sizeof(pActivePANs) );
-
- for(i=0; i<gMpmMaxPANs_c; i++)
- mPanInfo[i].phyRegSet = gMpmInvalidRegSet_c;
-
- PhyPpSetDualPanDwell( ((mDefaultDualPanDwellPrescaller_c << mDualPanDwellPrescallerShift_c) & mDualPanDwellPrescallerMask_c) |
- ((mDefaultDualPanDwellTime_c << mDualPanDwellTimeShift_c ) & mDualPanDwellTimeMask_c) );
-}
-
-/*! *********************************************************************************
-* \brief This function prepare the Radio for a TX/CCA/ED operation
-*
-* \param[in] macInstance The instance of the MAC
-*
-* \return The status of the Operation
-*
-********************************************************************************** */
-phyStatus_t MPM_PrepareForTx( instanceId_t macInstance )
-{
- uint8_t panIdx = MPM_GetPanIndex(macInstance);
-
- if( TRUE == mMpmExclusiveAccess && mPanInfo[panIdx].locked <= 0 )
- return gPhyChannelBusy_c;
-
- /* Allocate HW Resources if necessary */
- if( mPanInfo[panIdx].phyRegSet == gMpmInvalidRegSet_c )
- {
- if( gMpmInvalidRegSet_c == MPM_AllocateResource( TRUE, panIdx ) )
- return gPhyChannelBusy_c;
-
- MPM_SetPanSettingsInPhy( panIdx );
- }
-
- /* Disable DualPan Auto Mode, and select the Active PAN */
- PhyPpSetDualPanAuto( FALSE );
- PhyPpSetDualPanActiveNwk( mPanInfo[panIdx].phyRegSet );
- return gPhySuccess_c;
-}
-
-/*! *********************************************************************************
-* \brief This function checks if a PAN has the RxOnWhenIdle PIB set.
-* If an Rx needs to be started, it makes the propper settings in PHY.
-*
-* \param[in] None.
-*
-* \return phyStatus
-*
-********************************************************************************** */
-phyStatus_t MPM_PrepareForRx( instanceId_t macInstance )
-{
- uint32_t i, count = 0;
- uint32_t activePan;
-
- if( gInvalidInstanceId_c != macInstance ) //Rx
- {
- i = MPM_GetPanIndex(macInstance);
-
- if( !mMpmExclusiveAccess || mPanInfo[i].locked )
- {
- /* Allocate HW Resources if necessary */
- if( mPanInfo[i].phyRegSet == gMpmInvalidRegSet_c )
- {
- if( gMpmInvalidRegSet_c == MPM_AllocateResource( TRUE, i ) )
- return gPhyChannelBusy_c;
-
- MPM_SetPanSettingsInPhy( i );
- }
-
- count++;
- activePan = mPanInfo[i].phyRegSet;
- }
- }
- else //RxOnWhenIdle
- {
- for( i=0; i<gMpmPhyPanRegSets_c; i++)
- {
- if( (NULL != pActivePANs[i]) &&
- (pActivePANs[i]->flags & gMpmFlagRxOnWhenIdle_c) &&
- ( !mMpmExclusiveAccess || pActivePANs[i]->locked ) )
- {
- activePan = i;
- count++;
- }
- }
- }
-
- if( !count )
- return gPhyChannelBusy_c;
-
- /* Set the Active PAN and DualPan Auto mode if needed*/
- PhyPpSetDualPanActiveNwk( activePan );
- PhyPpSetDualPanAuto( count > 1 );
- return gPhySuccess_c;
-}
-
-/*! *********************************************************************************
-* \brief This function returns the PAN index for a MAC instance
-*
-* \param[in] macInstance The instance of the MAC
-*
-* \return The PAN index or -1 if it was not found
-*
-********************************************************************************** */
-int32_t MPM_GetPanIndex( instanceId_t macInstance )
-{
- uint32_t i;
-
- /* Get PAN Index for the macInstance */
- for( i=0; i<mRegisteredPANs; i++ )
- {
- if( mPanInfo[i].macInstance == macInstance )
- return i;
- }
-
- /* The instance of the MAC is not registered!
- * Register the current MAC instance if there is enough space.
- */
- if( mRegisteredPANs < gMpmMaxPANs_c )
- {
- mPanInfo[mRegisteredPANs].macInstance = macInstance;
-
- /* Try to allocate HW resource */
- mPanInfo[mRegisteredPANs].phyRegSet = MPM_AllocateResource( FALSE, i );
- mRegisteredPANs++;
- }
- else
- {
- i = -1;
- }
-
- return i;
-}
-
-
-/*! *********************************************************************************
-* \brief This function configures the MPM module
-*
-* \param[in] pCfg pointer to a configuration structure
-*
-* \remarks
-* The Dual PAN dwell time prescaller values: 0-3
-* The Dual PAN dwell time values 0-63.
-* The (dwellTime+1) represents multiples of the prescaller time base.
-*
-********************************************************************************** */
-void MPM_SetConfig( mpmConfig_t *pCfg )
-{
- PhyPpSetDualPanAuto ( FALSE );
- PhyPpSetDualPanDwell( pCfg->dwellTime );
- MPM_AllocateResource( TRUE, MPM_GetPanIndex(pCfg->activeMAC) );
- PhyPpSetDualPanAuto ( pCfg->autoMode );
- if( PhyIsIdleRx(0) )
- {
- PhyPlmeForceTrxOffRequest();
- Radio_Phy_TimeRxTimeoutIndication(0);
- }
-}
-
-/*! *********************************************************************************
-* \brief This function returns the MPM configuration
-*
-* \param[in] pCfg pointer to a configuration structure
-*
-* \return None.
-*
-********************************************************************************** */
-void MPM_GetConfig( mpmConfig_t *pCfg )
-{
- pCfg->dwellTime = PhyPpGetDualPanDwell();
- pCfg->activeMAC = MPM_GetMacInstanceFromRegSet( PhyPpGetDualPanActiveNwk() );
- pCfg->autoMode = PhyPpGetDualPanAuto();
-}
-#endif /* #if gMpmIncluded_d */
-
-/*! *********************************************************************************
-* \brief This function Acquires a PAN for exclusive access.
-*
-* \param[in] macInstance The instance of the MAC
-*
-* \return The status of the operation
-*
-********************************************************************************** */
-phyStatus_t MPM_AcquirePAN( instanceId_t macInstance )
-{
-#if gMpmIncluded_d
- int32_t panIndex = MPM_GetPanIndex(macInstance);
-
- /* Check if another PAN is acquired */
- if( TRUE == mMpmExclusiveAccess &&
- mPanInfo[panIndex].locked <= 0 )
- {
- return gPhyBusy_c;
- }
-
- if( mPanInfo[panIndex].locked == 0 )
- {
- mMpmExclusiveAccess = TRUE;
- if( PhyIsIdleRx(0) )
- {
- PhyPlmeForceTrxOffRequest();
- Radio_Phy_TimeRxTimeoutIndication(0);
- }
- }
-
- mPanInfo[panIndex].locked++;
-#endif
- return gPhySuccess_c;
-}
-
-/*! *********************************************************************************
-* \brief This function Releases a PAN that was Acquired
-*
-* \param[in] macInstance The instance of the MAC
-*
-* \return The status of the operation
-*
-********************************************************************************** */
-phyStatus_t MPM_ReleasePAN( instanceId_t macInstance )
-{
-#if gMpmIncluded_d
- uint8_t panIndex = MPM_GetPanIndex(macInstance);
-
- mPanInfo[panIndex].locked--;
- if( mPanInfo[panIndex].locked == 0 )
- {
- mMpmExclusiveAccess = FALSE;
- if( PhyIsIdleRx(0) )
- {
- PhyPlmeForceTrxOffRequest();
- Radio_Phy_TimeRxTimeoutIndication(0);
- }
- }
-#endif
- return gPhySuccess_c;
-}
-
-/************************************************************************************
-*************************************************************************************
-* Private functions
-*************************************************************************************
-************************************************************************************/
-#if gMpmIncluded_d
-/*! *********************************************************************************
-* \brief This function alocates a registry set to a PAN.
-*
-* \param[in] force If this parameter is TRUE, then another PAN can be preempted.
-* \param[in] panIdx The index into the MPM database
-*
-* \return The register set allocated for the specified PAN.
-*
-********************************************************************************** */
-static uint8_t MPM_AllocateResource( bool_t force, uint8_t panIdx )
-{
- uint32_t i, regSet = gMpmInvalidRegSet_c;
-
- if( mPanInfo[panIdx].phyRegSet != gMpmInvalidRegSet_c )
- return mPanInfo[panIdx].phyRegSet;
-
- for( i=0; i<gMpmPhyPanRegSets_c; i++ )
- {
- if( NULL == pActivePANs[i] )
- {
- regSet = i;
- break;
- }
- else if( (force) &&
- (pActivePANs[i]->flags == 0) &&
- (pActivePANs[i]->locked <= 0) )
- {
- regSet = i;
- }
- }
-
- if( regSet != gMpmInvalidRegSet_c )
- {
- if( NULL != pActivePANs[regSet] )
- {
- pActivePANs[regSet]->phyRegSet = gMpmInvalidRegSet_c;
- }
-
- pActivePANs[regSet] = &mPanInfo[panIdx];
- pActivePANs[regSet]->phyRegSet = regSet;
- }
-
- return regSet;
-}
-
-/*! *********************************************************************************
-* \brief This function will store PAN settings in PHY.
-*
-* \param[in] panIdx The index into the MPM database
-*
-* \return None.
-*
-* \remarks Function assumes that the PAN is active!
-*
-********************************************************************************** */
-static void MPM_SetPanSettingsInPhy( uint8_t panIndex )
-{
- panInfo_t *pPAN = &mPanInfo[panIndex];
-
-#if gMpmUseDifferentTxPwrLevel_c
- PhyPlmeSetPIBRequest(gPhyPibTransmitPower_c, pPAN->pwrLevel, pPAN->phyRegSet, 0 );
-#endif
-
-#if (gMpmMaxPANs_c > gMpmPhyPanRegSets_c)
- PhyPlmeSetPIBRequest(gPhyPibPromiscuousMode_c, !!(pPAN->flags & gMpmFlagPromiscuous_c), pPAN->phyRegSet, 0 );
- PhyPlmeSetPIBRequest(gPhyPibRxOnWhenIdle, !!(pPAN->flags & gMpmFlagRxOnWhenIdle_c), pPAN->phyRegSet, 0 );
- PhyPlmeSetPIBRequest(gPhyPibPanCoordinator_c, !!(pPAN->flags & gMpmFlagPanCoord_c), pPAN->phyRegSet, 0 );
- PhyPlmeSetPIBRequest(gPhyPibPanId_c, pPAN->panId, pPAN->phyRegSet, 0 );
- PhyPlmeSetPIBRequest(gPhyPibShortAddress_c, pPAN->shortAddr, pPAN->phyRegSet, 0 );
- PhyPlmeSetPIBRequest(gPhyPibLongAddress_c, pPAN->longAddr, pPAN->phyRegSet, 0 );
- PhyPlmeSetPIBRequest(gPhyPibCurrentChannel_c, pPAN->channel, pPAN->phyRegSet, 0 );
-#else
- (void)pPAN;
-#endif
-}
-#endif /* gMpmIncluded_d */
--- a/FSL_IEEE_802_15_4/PHY/MpmInterface.h Fri Jul 31 13:49:46 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,194 +0,0 @@
-/*!
-* Copyright (c) 2015, Freescale Semiconductor, Inc.
-* All rights reserved.
-*
-* \file MpmInterface.h
-* This is a header file for the Multiple PAN Manager.
-*
-* Redistribution and use in source and binary forms, with or without modification,
-* are permitted provided that the following conditions are met:
-*
-* o Redistributions of source code must retain the above copyright notice, this list
-* of conditions and the following disclaimer.
-*
-* o Redistributions in binary form must reproduce the above copyright notice, this
-* list of conditions and the following disclaimer in the documentation and/or
-* other materials provided with the distribution.
-*
-* o Neither the name of Freescale Semiconductor, Inc. nor the names of its
-* contributors may be used to endorse or promote products derived from this
-* software without specific prior written permission.
-*
-* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
-* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
-* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-*/
-
-#ifndef __MPM_H__
-#define __MPM_H__
-
-/************************************************************************************
-*************************************************************************************
-* Include
-*************************************************************************************
-************************************************************************************/
-
-#include "EmbeddedTypes.h"
-//#include "fsl_os_abstraction.h"
-#include "PhyInterface.h"
-
-/************************************************************************************
-*************************************************************************************
-* Public macros
-*************************************************************************************
-************************************************************************************/
-
-/* The maximun number of MAC instances that can be registered.
- * If set to 0, the MPM is disabled!
- */
-#if !defined(gMpmMaxPANs_c)
-#define gMpmMaxPANs_c 1
-#endif
-
-#define gMpmIncluded_d (gMpmMaxPANs_c > 1)
-
-#define gMpmPhyPanRegSets_c (2)
-#define gMpmUseDifferentTxPwrLevel_c (0)
-#define gMpmAcquireIsBlocking_d (0)
-#define gMpmInvalidRegSet_c (gMpmPhyPanRegSets_c)
-
-/* Dual Pan Dwell settings
- +-----------------+---------------------+
- | PRESCALER | RANGE |
- | bits [1:0] | bits [7:2] |
- +------+----------+---------------------+
- |value | timebase | min - max |
- +------+----------+---------------------+
- | 00 | 0.5 ms | 0.5 - 32 ms |
- | 01 | 2.5 ms | 2.5 - 160 ms |
- | 10 | 10 ms | 10 - 640 ms |
- | 11 | 50 ms | 50 - 3.2 seconds |
- +------+----------+---------------------+
-*/
-
- /* Dwell Time prescaller (0 to 3) */
- #define mDefaultDualPanDwellPrescaller_c (0x00) // 0,5 ms
- #define mDualPanDwellPrescallerMask_c (0x03)
- #define mDualPanDwellPrescallerShift_c (0)
-
- /* Dwell Time value (0 to 63) */
- #define mDefaultDualPanDwellTime_c (0x06)
- #define mDualPanDwellTimeMask_c (0xFC)
- #define mDualPanDwellTimeShift_c (2)
-
-
-#if (gMpmMaxPANs_c > gMpmPhyPanRegSets_c)
- #error The number of PANs exceeds the number of HW registry sets! This feature is not supported yet.
-#endif
-
-/* MPM flags */
-#define gMpmFlagPanCoord_c (1 << 0)
-#define gMpmFlagPromiscuous_c (1 << 1)
-#define gMpmFlagRxOnWhenIdle_c (1 << 2)
-
-/************************************************************************************
-*************************************************************************************
-* Public type definitions
-*************************************************************************************
-************************************************************************************/
-
-typedef PACKED_STRUCT mpmConfig_tag{
- bool_t autoMode;
- uint8_t dwellTime;
- uint8_t activeMAC;
-}mpmConfig_t;
-
-typedef union panFlags_tag{
- uint16_t all;
- struct{
- uint16_t panCoordinator: 1;
- uint16_t promiscuous: 1;
- uint16_t rxOnWhenIdle: 1;
- uint16_t reserved: 13;
- };
-}panFlags_t;
-
-typedef struct panInfo_tag{
- uint8_t flags;
- uint8_t macInstance;
- uint8_t phyRegSet;
- int8_t locked;
-#if (gMpmMaxPANs_c > gMpmPhyPanRegSets_c)
- uint64_t longAddr;
- uint16_t shortAddr;
- uint16_t panId;
- uint8_t channel;
-#endif
-#if gMpmUseDifferentTxPwrLevel_c
- uint8_t pwrLevel;
-#endif
-}panInfo_t;
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/************************************************************************************
-*************************************************************************************
-* Public memory declarations
-*************************************************************************************
-************************************************************************************/
-
-/************************************************************************************
-*************************************************************************************
-* Public functions
-*************************************************************************************
-************************************************************************************/
-#if gMpmIncluded_d
-
-void MPM_Init( void );
-void MPM_SetConfig( mpmConfig_t *pCfg );
-void MPM_GetConfig( mpmConfig_t *pCfg );
-
-int32_t MPM_GetPanIndex( instanceId_t macInstance );
-uint32_t MPM_GetRegSet(uint8_t panIdx);
-uint32_t MPM_GetMacInstanceFromRegSet(uint32_t regSet);
-#define MPM_isPanActive( panIdx ) (MPM_GetRegSet(panIdx) != gMpmInvalidRegSet_c)
-
-phyStatus_t MPM_PrepareForTx( instanceId_t macInstance );
-phyStatus_t MPM_PrepareForRx( instanceId_t macInstance );
-phyStatus_t MPM_GetPIB(phyPibId_t pibId, void *pValue, uint8_t panIdx);
-phyStatus_t MPM_SetPIB(phyPibId_t pibId, void *pValue, uint8_t panIdx);
-
-#else /* #if gMpmIncluded_d */
-
-#define MPM_Init()
-#define MPM_SetConfig( prescaller, dwellTime )
-
-#define MPM_GetPanIndex( macInstance ) 0
-#define MPM_GetRegSet( panIdx ) 0
-#define MPM_GetMacInstanceFromRegSet( regSet ) 0
-#define MPM_isPanActive( panIdx ) 1
-
-#define MPM_PrepareForTx( macInstance ) gPhySuccess_c
-#define MPM_PrepareForRx( macInstance ) gPhySuccess_c
-#define MPM_GetPIB( pibId, pibValue, panIdx ) gPhySuccess_c
-#define MPM_SetPIB( pibId, pibValue, panIdx ) gPhySuccess_c
-
-#endif /* #if gMpmIncluded_d */
-
-phyStatus_t MPM_AcquirePAN( instanceId_t macInstance );
-phyStatus_t MPM_ReleasePAN( instanceId_t macInstance );
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /*__MPM_H__ */
--- a/FSL_IEEE_802_15_4/PHY/Phy.h Fri Jul 31 13:49:46 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,1120 +0,0 @@
-/*!
-* Copyright (c) 2015, Freescale Semiconductor, Inc.
-* All rights reserved.
-*
-* \file Phy.h
-*
-* Redistribution and use in source and binary forms, with or without modification,
-* are permitted provided that the following conditions are met:
-*
-* o Redistributions of source code must retain the above copyright notice, this list
-* of conditions and the following disclaimer.
-*
-* o Redistributions in binary form must reproduce the above copyright notice, this
-* list of conditions and the following disclaimer in the documentation and/or
-* other materials provided with the distribution.
-*
-* o Neither the name of Freescale Semiconductor, Inc. nor the names of its
-* contributors may be used to endorse or promote products derived from this
-* software without specific prior written permission.
-*
-* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
-* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
-* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-*/
-
-#ifndef __PHY_H__
-#define __PHY_H__
-
-
-/*****************************************************************************
- * INCLUDED HEADERS *
- *---------------------------------------------------------------------------*
- * Add to this section all the headers that this module needs to include. *
- * Note that it is not a good practice to include header files into header *
- * files, so use this section only if there is no other better solution. *
- *---------------------------------------------------------------------------*
- *****************************************************************************/
-
-#include "EmbeddedTypes.h"
-#include "PhyInterface.h"
-//#include "fsl_os_abstraction.h"
-
-/*****************************************************************************
- * PUBLIC MACROS, DEFINITIONS *
- *---------------------------------------------------------------------------*
- * Add to this section all the access macros, registers mappings, bit access *
- * macros, masks, flags etc ...
- *---------------------------------------------------------------------------*
- *****************************************************************************/
-
- #ifdef __cplusplus
- extern "C" {
-#endif
-
-#ifdef _DEBUG
-#ifdef gPHY_802_15_4g_d
-#define MAC_PHY_DEBUG
-#endif
-#endif
-
-#ifndef gSnifferCRCEnabled_d
-#define gSnifferCRCEnabled_d (0)
-#endif
-
-#ifndef gUseStandaloneCCABeforeTx_d
-#define gUseStandaloneCCABeforeTx_d (1)
-#endif
-
-#ifndef gUsePBTransferThereshold_d
-#define gUsePBTransferThereshold_d (0)
-#endif
-
-#ifndef gPhyRxRetryInterval_c
-#define gPhyRxRetryInterval_c (100) /* [symbols] */
-#endif
-
-#ifndef gPhyMsgQueueMax_c
-#define gPhyMsgQueueMax_c (10) /* [list entries] */
-#endif
-
-// PHY states
-enum {
- gIdle_c,
- gRX_c,
- gTX_c,
- gCCA_c,
- gTR_c,
- gCCCA_c,
-#ifdef gPHY_802_15_4g_d
- gED_c
-#endif // gPHY_802_15_4g_d
-};
-
-// PHY channel state
-enum {
- gChannelIdle_c,
- gChannelBusy_c
-};
-
-// PANCORDNTR bit in PP
-enum {
- gMacRole_DeviceOrCoord_c,
- gMacRole_PanCoord_c
-};
-
-// Cca types
-enum {
- gCcaED_c, // energy detect - CCA bit not active, not to be used for T and CCCA sequences
- gCcaCCA_MODE1_c, // energy detect - CCA bit ACTIVE
- gCcaCCA_MODE2_c, // 802.15.4 compliant signal detect - CCA bit ACTIVE
- gCcaCCA_MODE3_c, //
- gInvalidCcaType_c // illegal type
-};
-
-enum {
- gNormalCca_c,
- gContinuousCca_c
-};
-
-
-/*****************************************************************************
-* Public type definitions *
-*****************************************************************************/
-typedef struct macPhyInputQueue_tag
-{
- uint32_t msgInIdx;
- phyMessageHeader_t * pMsgIn[gPhyMsgQueueMax_c];
-} macPhyInputQueue_t;
-
-typedef struct Phy_PhyLocalStruct_tag
-{
- PD_MAC_SapHandler_t PD_MAC_SapHandler;
- PLME_MAC_SapHandler_t PLME_MAC_SapHandler;
-// event_t phyTaskEventId;
-// msgQueue_t macPhyInputQueue;
- macPhyInputQueue_t macPhyInputQueue;
- uint32_t maxFrameWaitTime;
- volatile phyTxParams_t txParams;
- union{
- volatile phyRxParams_t rxParams;
- volatile phyChannelParams_t channelParams;
- };
-#ifdef gPHY_802_15_4g_d
- volatile phyFlags_t flags;
- phyTime_t startTime;
- uint16_t phyUnavailableQueuePos;
- uint16_t phyIndirectQueue[gPhyIndirectQueueSize_c];
- uint16_t fcs;
- uint8_t macPanID[2];
- uint8_t macShortAddress[2];
- uint8_t macLongAddress[8];
-#else
- volatile uint8_t flags;
-#endif // gPHY_802_15_4g_d
- uint8_t currentMacInstance;
-}Phy_PhyLocalStruct_t;
-
-
-/*****************************************************************************
-* Public macros *
-*****************************************************************************/
-
-#define PhyGetSeqState() PhyPpGetState()
-#define PhyPlmeForceTrxOffRequest() PhyAbort()
-
-
-/*****************************************************************************
-* Public prototypes *
-*****************************************************************************/
-
-// PHY Packet Processor
-
-/*---------------------------------------------------------------------------
- * Name: PhyHwInit
- * Description: -
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-void PhyHwInit
-(
- void
-);
-
-/*---------------------------------------------------------------------------
- * Name: PhyPpSetPromiscuous
- * Description: -
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-void PhyPpSetPromiscuous
-(
- bool_t mode
-);
-
-/*---------------------------------------------------------------------------
-* Name: PhySetActivePromState()
-* Description: -
-* Parameters: -
-* Return: -
-*---------------------------------------------------------------------------*/
-void PhySetActivePromiscuous
-(
-bool_t state
-);
-
-/*---------------------------------------------------------------------------
-* Name: PhyGetActivePromiscuous()
-* Description: -
-* Parameters: -
-* Return: - TRUE/FALSE
-*---------------------------------------------------------------------------*/
-bool_t PhyGetActivePromiscuous
-(
-void
-);
-
-/*---------------------------------------------------------------------------
- * Name: PhyPpSetPanId
- * Description: -
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-phyStatus_t PhyPpSetPanId
-(
- uint8_t *pPanId,
- uint8_t pan
-);
-
-/*---------------------------------------------------------------------------
- * Name: PhyPpSetShortAddr
- * Description: -
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-phyStatus_t PhyPpSetShortAddr
-(
- uint8_t *pShortAddr,
- uint8_t pan
-);
-
-
-/*---------------------------------------------------------------------------
- * Name: PhyPpSetLongAddr
- * Description: -
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-phyStatus_t PhyPpSetLongAddr
-(
- uint8_t *pLongAddr,
- uint8_t pan
-);
-
-/*---------------------------------------------------------------------------
- * Name: PhyPpSetMacRole
- * Description: -
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-phyStatus_t PhyPpSetMacRole
-(
- bool_t macRole,
- uint8_t pan
-);
-
-
-/*---------------------------------------------------------------------------
- * Name: PhyPpIsTxAckDataPending
- * Description: -
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-bool_t PhyPpIsTxAckDataPending
-(
- void
-);
-
-/*---------------------------------------------------------------------------
- * Name: PhyPpIsRxAckDataPending
- * Description: -
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-bool_t PhyPpIsRxAckDataPending
-(
- void
-);
-
-/*---------------------------------------------------------------------------
- * Name: PhyPpSetFpManually
- * Description: -
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-void PhyPpSetFpManually
-(
- bool_t FP
-);
-
-/*---------------------------------------------------------------------------
- * Name: PhyPpIsPollIndication
- * Description: -
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-bool_t PhyPpIsPollIndication
-(
- void
-);
-
-/*---------------------------------------------------------------------------
- * Name: PhyPpSetSAMState
- * Description: -
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-void PhyPpSetSAMState
-(
- bool_t state
-);
-
-/*---------------------------------------------------------------------------
- * Name: Phy_IndirectQueueChecksum
- * Description: Function called to compute the checksum for a 16bit or 64bit address
- * in the same way as the transceiver
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-#ifdef gPHY_802_15_4g_d
-uint16_t Phy_IndirectQueueChecksum
-(
- bool_t addrType,
- uint64_t address,
- uint16_t panId
-);
-#endif // gPHY_802_15_4g_d
-
-/*---------------------------------------------------------------------------
- * Name: PhyPp_IndirectQueueInsert
- * Description: -
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-phyStatus_t PhyPp_IndirectQueueInsert
-(
- uint8_t index,
- uint16_t checkSum,
- instanceId_t instanceId
-);
-
-/*---------------------------------------------------------------------------
- * Name: PhyPp_RemoveFromIndirect
- * Description: -
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-phyStatus_t PhyPp_RemoveFromIndirect
-(
- uint8_t index,
- instanceId_t instanceId
-);
-
-/*---------------------------------------------------------------------------
- * Name: PhyPpGetState
- * Description: -
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-uint8_t PhyPpGetState
-(
- void
-);
-
-/*---------------------------------------------------------------------------
- * Name: PhySetState
- * Description: -
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-#ifdef gPHY_802_15_4g_d
-void PhySetState
-(
- uint8_t phyState
-);
-#endif //gPHY_802_15_4g_d
-
-/*---------------------------------------------------------------------------
- * Name: PhyAbort
- * Description: -
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-void PhyAbort
-(
- void
-);
-
-// PHY PLME & DATA primitives
-
-/*---------------------------------------------------------------------------
- * Name: PhyPdDataRequest
- * Description: -
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-phyStatus_t PhyPdDataRequest
-(
- pdDataReq_t *pTxPacket,
- volatile phyRxParams_t *pRxParams,
- volatile phyTxParams_t *pTxParams
-);
-
-/*---------------------------------------------------------------------------
- * Name: PhyPlmeRxRequest
- * Description: -
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-phyStatus_t PhyPlmeRxRequest
-(
- phySlottedMode_t phyRxMode,
- phyRxParams_t * pRxParams
-);
-
-/*---------------------------------------------------------------------------
- * Name: PhyPlmeCcaEdRequest
- * Description: -
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-phyStatus_t PhyPlmeCcaEdRequest
-(
- phyCCAType_t ccaParam,
- phyContCCAMode_t cccaMode
-);
-
-/*---------------------------------------------------------------------------
- * Name: PhyPlmeSetCurrentChannelRequest
- * Description: -
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-phyStatus_t PhyPlmeSetCurrentChannelRequest
-(
- uint8_t channel,
- uint8_t pan
-);
-
-/*---------------------------------------------------------------------------
- * Name: PhyPlmeGetCurrentChannelRequest
- * Description: -
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-uint8_t PhyPlmeGetCurrentChannelRequest
-(
- uint8_t pan
-);
-
-/*---------------------------------------------------------------------------
- * Name: PhyPlmeSetPwrLevelRequest
- * Description: -
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-phyStatus_t PhyPlmeSetPwrLevelRequest
-(
- uint8_t pwrStep
-);
-
-/*---------------------------------------------------------------------------
- * Name: PhyPlmeGetPwrLevelRequest
- * Description: -
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-uint8_t PhyPlmeGetPwrLevelRequest
-(
- void
-);
-
-/*---------------------------------------------------------------------------
- * Name: PhyPlmeSetPwrState
- * Description: -
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-phyStatus_t PhyPlmeSetPwrState
-(
- uint8_t state
-);
-
-/*---------------------------------------------------------------------------
- * Name: PhyPlmeSetPIBRequest
- * Description: -
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-phyStatus_t PhyPlmeSetPIBRequest
-(
- phyPibId_t pibId,
- uint64_t pibValue,
- uint8_t phyRegistrySet,
- instanceId_t instanceId
-);
-
-/*---------------------------------------------------------------------------
- * Name: PhyPlmeGetPIBRequest
- * Description: -
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-phyStatus_t PhyPlmeGetPIBRequest
-(
- phyPibId_t pibId,
- uint64_t * pibValue,
- uint8_t phyRegistrySet,
- instanceId_t instanceId
-);
-
-/*---------------------------------------------------------------------------
- * Name: PhyPpSetCcaThreshold
- * Description: -
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-
-phyStatus_t PhyPpSetCcaThreshold
-(
- uint8_t ccaThreshold
-);
-
-// PHY Time
-
-/*---------------------------------------------------------------------------
- * Name: PhyTimeSetEventTrigger
- * Description: -
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-void PhyTimeSetEventTrigger
-(
- phyTime_t startTime
-);
-
-/*---------------------------------------------------------------------------
- * Name: PhyTimeSetEventTimeout
- * Description: -
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-void PhyTimeSetEventTimeout
-(
- phyTime_t *pEndTime
-);
-
-/*---------------------------------------------------------------------------
- * Name: PhyTimeGetEventTimeout
- * Description: -
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-uint32_t PhyTimeGetEventTimeout( void );
-
-/*---------------------------------------------------------------------------
- * Name: PhyTimeReadClock
- * Description: -
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-void PhyTimeReadClock
-(
- phyTime_t *pRetClk
-);
-
-/*---------------------------------------------------------------------------
- * Name: PhyTimeDisableEventTimeout
- * Description: -
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-void PhyTimeDisableEventTimeout
-(
- void
-);
-
-/*---------------------------------------------------------------------------
- * Name: PhyTimeDisableEventTrigger
- * Description: -
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-void PhyTimeDisableEventTrigger
-(
- void
-);
-
-
-#ifdef gPHY_802_15_4g_d
-/*---------------------------------------------------------------------------
- * Name: PhyTimeDisableRxTimeout
- * Description: -
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-void PhyTimeDisableRxTimeout
-(
- void
-);
-#endif // gPHY_802_15_4g_d
-
-/*---------------------------------------------------------------------------
- * Name: PhyTimeSetWakeUpTime
- * Description: -
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-void PhyTimeSetWakeUpTime
-(
- uint32_t *pWakeUpTime
-);
-/*---------------------------------------------------------------------------
- * Name: PhyTimeInitEventTimer
- * Description: -
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-void PhyTimeInitEventTimer
-(
- uint32_t *pAbsTime
-);
-
-/*---------------------------------------------------------------------------
- * Name: PhyTimeIsWakeUpTimeExpired
- * Description: -
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-bool_t PhyTimeIsWakeUpTimeExpired
-(
- void
-);
-
-/*---------------------------------------------------------------------------
- * Name: PhyTimeSetWaitTimeout
- * Description: -
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-void PhyTimeSetWaitTimeout
-(
- phyTime_t *pWaitTimeout
-);
-
-/*---------------------------------------------------------------------------
- * Name: PhyTimeDisableWaitTimeout
- * Description: -
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-void PhyTimeDisableWaitTimeout
-(
- void
-);
-
-// PHY ISR
-
-/*---------------------------------------------------------------------------
- * Name: PHY_InstallIsr
- * Description: -
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-void PHY_InstallIsr
-(
- void
-);
-
-/*---------------------------------------------------------------------------
- * Name: PHY_InterruptHandler
- * Description: -
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-void PHY_InterruptHandler
-(
- void
-);
-
-
-/*---------------------------------------------------------------------------
- * Name: PhyIsrPassRxParams()
- * Description: -
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-void PhyIsrPassRxParams
-(
- volatile phyRxParams_t * pRxParam
-);
-
-#ifdef gPHY_802_15_4g_d
-/*---------------------------------------------------------------------------
- * Name: PhyIsrPassRxParams()
- * Description: -
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-uint8_t PhyPassTxParams
-(
- pdDataReq_t *pTxParam
-);
-#endif // gPHY_802_15_4g_d
-
-/*---------------------------------------------------------------------------
- * Name: PhyIsrPassTaskParams()
- * Description: -
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-void PhyIsrPassTaskParams
-(
- instanceId_t instanceId
-);
-
-
-/*---------------------------------------------------------------------------
- * Name: PhyIsrTimeoutCleanup
- * Description: -
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-void PhyIsrTimeoutCleanup
-(
- void
-);
-
-/*---------------------------------------------------------------------------
- * Name: PhyIsrSeqCleanup
- * Description: -
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-void PhyIsrSeqCleanup
-(
- void
-);
-
-/*****************************************************************************
-* PhyGetRandomNo function
-*
-* Interface assumptions:
-*
-* Return Value:
-* None
-*****************************************************************************/
-void PhyGetRandomNo
-(
- uint32_t *pRandomNo
-);
-
-/*****************************************************************************
-* PhyPpSetDualPanAuto function
-*
-* Interface assumptions:
-*
-* Return Value:
-* None
-*****************************************************************************/
-void PhyPpSetDualPanAuto
-(
- bool_t mode
-);
-
-/*****************************************************************************
-* PhyPpGetDualPanAuto function
-*
-* Interface assumptions:
-*
-* Return Value:
-* None
-*****************************************************************************/
-bool_t PhyPpGetDualPanAuto
-(
- void
-);
-
-/*****************************************************************************
-* PhyPpSetDualPanDwell function
-*
-* Interface assumptions:
-*
-* Return Value:
-* None
-*****************************************************************************/
-void PhyPpSetDualPanDwell
-(
- uint8_t
-);
-
-/*****************************************************************************
-* PhyPpGetDualPanDwell function
-*
-* Interface assumptions:
-*
-* Return Value:
-* None
-*****************************************************************************/
-uint8_t PhyPpGetDualPanDwell
-(
- void
-);
-
-/*****************************************************************************
-* PhyPpGetDualPanRemain function
-*
-* Interface assumptions:
-*
-* Return Value:
-* The remaining time until a channel switch will occure
-*****************************************************************************/
-uint8_t PhyPpGetDualPanRemain
-(
- void
-);
-
-/*****************************************************************************
-* PhyPpSetDualPanSamLvl function
-*
-* Interface assumptions:
-*
-* Return Value:
-* None
-*****************************************************************************/
-void PhyPpSetDualPanSamLvl
-(
- uint8_t
-);
-
-/*****************************************************************************
-* PhyPpGetDualPanSamLvl function
-*
-* Interface assumptions:
-*
-* Return Value:
-* The level at which the HW queue is split for the two PANs
-*****************************************************************************/
-uint8_t PhyPpGetDualPanSamLvl
-(
- void
-);
-
-/*****************************************************************************
-* PhyPpSetDualPanSamLvl function
-*
-* Interface assumptions:
-*
-* Return Value:
-* None
-*****************************************************************************/
-void PhyPpSetDualPanActiveNwk
-(
- uint8_t
-);
-
-/*****************************************************************************
-* PhyPpGetDualPanActiveNwk function
-*
-* Interface assumptions:
-*
-* Return Value:
-* The current NWK on which the PHY is operating
-*****************************************************************************/
-uint8_t PhyPpGetDualPanActiveNwk
-(
- void
-);
-
-/*****************************************************************************
-* PhyPpGetPanOfRxPacket function
-*
-* Interface assumptions:
-*
-* Return Value:
-* The PAN on which the packet was received (can be receiced on both PANs)
-*****************************************************************************/
-uint8_t PhyPpGetPanOfRxPacket
-(
- void
-);
-
-#ifdef gPHY_802_15_4g_d
-/*---------------------------------------------------------------------------
- * Name: PhyPpPassTaskParams()
- * Description: -
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-void PhyPpPassTaskParams
-(
- instanceId_t instanceId
-);
-
-/*---------------------------------------------------------------------------
- * Name: PhyPpSetCSLRxEnabled()
- * Description: -
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-phyStatus_t PhyPpSetCSLRxEnabled
-(
- bool_t cslRx,
- instanceId_t instanceId
-);
-
-/*---------------------------------------------------------------------------
- * Name: PhyPib_SetCSLTxEnabled()
- * Description: -
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-phyStatus_t PhyPpSetCSLTxEnabled
-(
- bool_t cslTx,
- instanceId_t instanceId
-);
-#endif // gPHY_802_15_4g_d
-
-/*****************************************************************************
-* PhyGetLastRxLqiValue function
-*
-* Interface assumptions:
-*
-* Return Value:
-* The LQI value for the last received packet
-*****************************************************************************/
-uint8_t PhyGetLastRxLqiValue(void);
-
-/*****************************************************************************
-* PhyGetLastRxRssiValue function
-*
-* Interface assumptions:
-*
-* Return Value:
-* The RSSI value for the last received packet
-*****************************************************************************/
-uint8_t PhyGetLastRxRssiValue(void);
-
-/*****************************************************************************
-* PhyPlmeSetFADStateRequest function
-*
-* Interface assumptions: state
-*
-* Return Value: gPhySuccess
-*
-* Description: Enable the FAD function (FAD_EN bit)
-*****************************************************************************/
-uint8_t PhyPlmeSetFADStateRequest(bool_t state);
-
-/*****************************************************************************
-* PhyPlmeSetFADThresholdRequest function
-*
-* Interface assumptions: FADThreshold
-*
-* Return Value: gPhySuccess
-*
-* Description: Correlator threshold at which the FAD will select the antenna
-*****************************************************************************/
-uint8_t PhyPlmeSetFADThresholdRequest(uint8_t FADThreshold);
-
-uint8_t PhyPlmeSetANTPadStateRequest(bool_t antAB_on, bool_t rxtxSwitch_on);
-uint8_t PhyPlmeSetANTPadStrengthRequest(bool_t hiStrength);
-uint8_t PhyPlmeSetANTPadInvertedRequest(bool_t invAntA, bool_t invAntB, bool_t invTx, bool_t invRx);
-
-/*****************************************************************************
-* PhyPlmeSetANTXStateRequest function
-*
-* Interface assumptions: state
-*
-* Return Value: gPhySuccess
-*
-* Description: ANTX_IN - FAD Antenna start when FAD_EN = 1 or antenna selected
-* when FAD_EN=0
-*****************************************************************************/
-uint8_t PhyPlmeSetANTXStateRequest(bool_t state);
-
-/*****************************************************************************
-* PhyPlmeGetANTXStateRequest function
-*
-* Interface assumptions: none
-*
-* Return Value: Chosen antenna by the FAD (FAD_EN = 1) or copy of ANTX_IN
-*
-* Description: Antenna selected in FAD of non-FAD mode
-*****************************************************************************/
-uint8_t PhyPlmeGetANTXStateRequest(void);
-
-/*****************************************************************************
-* PhyPlmeSetLQIModeRequest function
-*
-* Interface assumptions: none
-*
-* Return Value: gPhySuccess
-*
-* Description: Choose LQI Mode: 1 - LQI Based on RSSI,
-* 0 - LQI Based on Correlation Peaks
-*****************************************************************************/
-uint8_t PhyPlmeSetLQIModeRequest(uint8_t lqiMode);
-
-/*****************************************************************************
-* PhyPlmeGetRSSILevelRequest function
-*
-* Interface assumptions: none
-*
-* Return Value: RSSI level
-*
-* Description: Returns the RSSI level value, refreshed every 125us
-*****************************************************************************/
-uint8_t PhyPlmeGetRSSILevelRequest(void);
-
-#ifdef gPHY_802_15_4g_d
-/*****************************************************************************
-* PhyPlmeDataPassTaskParams function
-*
-* Interface assumptions: none
-*
-* Return Value:
-*
-* Description:
-*****************************************************************************/
-void PhyPlmeDataPassTaskParams(instanceId_t instanceId);
-#endif // gPHY_802_15_4g_d
-
-/*****************************************************************************
-* PhySetRxOnWhenIdle function
-*
-* Interface assumptions: none
-*
-* Return Value: None.
-*
-* Description: Informs the PHY if it should start an RX when entering IDLE or not
-*****************************************************************************/
-void PhyPlmeSetRxOnWhenIdle( bool_t state, instanceId_t instanceId );
-
-/*****************************************************************************
-* PhyPlmeSetFrameWaitTime function
-*
-* Interface assumptions: none
-*
-* Return Value: None.
-*
-* Description: Set the amount of time in symbols to wait for an data frame
-* after receiving an ACK with FP=1
-*****************************************************************************/
-void PhyPlmeSetFrameWaitTime( uint32_t time, instanceId_t instanceId );
-
-/*****************************************************************************
-* Phy_SetSequenceTiming function
-*
-* Interface assumptions: none
-*
-* Return Value: None.
-*
-* Description:
-*
-*****************************************************************************/
-#ifndef gPHY_802_15_4g_d
-void Phy_SetSequenceTiming(phyTime_t startTime, uint32_t seqDuration);
-#else
-void Phy_SetSequenceTiming(phyTime_t startTime, uint32_t seqDuration, uint8_t nextState, instanceId_t instanceId);
-void Phy_SetRxTiming(uint32_t seqDuration, uint8_t nextState, instanceId_t instanceId);
-#endif // gPHY_802_15_4g_d
-
-uint8_t Phy_GetEnergyLevel(uint8_t energyLeveldB);
-
-// RADIO EVENTS
-
-void Radio_Phy_PdDataConfirm(instanceId_t instanceId, bool_t framePending);
-
-void Radio_Phy_TimeWaitTimeoutIndication(instanceId_t instanceId);
-
-void Radio_Phy_TimeRxTimeoutIndication(instanceId_t instanceId);
-
-void Radio_Phy_PdDataIndication(instanceId_t instanceId);
-
-void Radio_Phy_TimeStartEventIndication(instanceId_t instanceId);
-
-void Radio_Phy_PlmeCcaConfirm(phyStatus_t phyChannelStatus, instanceId_t instanceId);
-
-void Radio_Phy_PlmeEdConfirm(uint8_t energyLeveldB, instanceId_t instanceId);
-
-void Radio_Phy_PlmeSyncLossIndication(instanceId_t instanceId);
-
-void Radio_Phy_PlmeRxSfdDetect(instanceId_t instanceId, uint32_t param);
-
-void Radio_Phy_PlmeFilterFailRx(instanceId_t instanceId);
-
-#ifdef gPHY_802_15_4g_d
-void Radio_Phy_WaitTurnaround(instanceId_t instanceId);
-void Radio_Phy_WaitTurnaroundComplete(instanceId_t instanceId);
-#endif
-
-void Radio_Phy_UnexpectedTransceiverReset(instanceId_t instanceId);
-
-void Radio_Phy_DummyEvent(instanceId_t instanceId);
-
-bool_t PhyIsIdleRx( instanceId_t instanceId );
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __PHY_H__ */
--- a/FSL_IEEE_802_15_4/PHY/PhyConfig.h Fri Jul 31 13:49:46 2015 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,64 +0,0 @@ -/*! -* Copyright (c) 2015, Freescale Semiconductor, Inc. -* All rights reserved. -* -* \file PhyConfig.h -* -* Redistribution and use in source and binary forms, with or without modification, -* are permitted provided that the following conditions are met: -* -* o Redistributions of source code must retain the above copyright notice, this list -* of conditions and the following disclaimer. -* -* o Redistributions in binary form must reproduce the above copyright notice, this -* list of conditions and the following disclaimer in the documentation and/or -* other materials provided with the distribution. -* -* o Neither the name of Freescale Semiconductor, Inc. nor the names of its -* contributors may be used to endorse or promote products derived from this -* software without specific prior written permission. -* -* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR -* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -*/ - -#ifndef _PHY_CONFIG_H_ -#define _PHY_CONFIG_H_ - -#ifndef gAspCapability_d -#define gAspCapability_d 1 -#endif - -#ifndef gMaxPhyTimers_c -#define gMaxPhyTimers_c 10 -#endif - -#ifndef gMpmMaxPANs_c -#define gMpmMaxPANs_c 1 -#endif - -#ifndef gPhyInstancesCnt_c -#define gPhyInstancesCnt_c 1 -#endif - -#ifndef gPhyTaskStackSize_c -#define gPhyTaskStackSize_c 600 -#endif - -#ifndef gPhyTaskPriority_c -#define gPhyTaskPriority_c OSA_PRIORITY_REAL_TIME -#endif - -#ifndef gAfcEnabled_d -#define gAfcEnabled_d 0 -#endif - -#endif //_PHY_CONFIG_H_
--- a/FSL_IEEE_802_15_4/PHY/PhyDebug.c Fri Jul 31 13:49:46 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,137 +0,0 @@
-/*!
-* Copyright (c) 2015, Freescale Semiconductor, Inc.
-* All rights reserved.
-*
-* \file PhyDebug.c
-* MCR20: PHY debug and logging functions
-*
-* Redistribution and use in source and binary forms, with or without modification,
-* are permitted provided that the following conditions are met:
-*
-* o Redistributions of source code must retain the above copyright notice, this list
-* of conditions and the following disclaimer.
-*
-* o Redistributions in binary form must reproduce the above copyright notice, this
-* list of conditions and the following disclaimer in the documentation and/or
-* other materials provided with the distribution.
-*
-* o Neither the name of Freescale Semiconductor, Inc. nor the names of its
-* contributors may be used to endorse or promote products derived from this
-* software without specific prior written permission.
-*
-* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
-* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
-* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-*/
-
-
-/************************************************************************************
-*************************************************************************************
-* Includes
-*************************************************************************************
-************************************************************************************/
-
-#include "EmbeddedTypes.h"
-//#include "PortConfig.h"
-#include "MCR20Drv.h"
-#include "MCR20Reg.h"
-#include "Phy.h"
-#include "PhyDebug.h"
-
-
-#ifdef MAC_PHY_DEBUG
-
-
-/************************************************************************************
-*************************************************************************************
-* Private memory declarations
-*************************************************************************************
-************************************************************************************/
-
-uint16_t nDebugIndex = 0, nDebugSize = DEBUG_LOG_ENTRIES * 4;
-uint8_t nDebugStorage[DEBUG_LOG_ENTRIES * 4];
-
-
-/************************************************************************************
-*************************************************************************************
-* Public functions
-*************************************************************************************
-************************************************************************************/
-
-void PhyDebugLogTime(uint8_t item)
-{
- uint32_t time;
- nDebugStorage[nDebugIndex + 0] = item;
- MCR20Drv_DirectAccessSPIMultiByteRead( (uint8_t) EVENT_TMR_LSB, (uint8_t *) &time, 3);
-
- nDebugStorage[nDebugIndex + 3] = (uint8_t) (time >> 0);
- nDebugStorage[nDebugIndex + 2] = (uint8_t) (time >> 8);
- nDebugStorage[nDebugIndex + 1] = (uint8_t) (time >> 16);
-
- nDebugIndex += 4;
- if(nDebugIndex >= nDebugSize)
- {
- nDebugIndex = 0;
- }
-}
-
-/***********************************************************************************/
-
-void PhyDebugLogParam1(uint8_t item, uint8_t param1)
-{
- nDebugStorage[nDebugIndex + 0] = item;
- nDebugStorage[nDebugIndex + 1] = param1;
- nDebugStorage[nDebugIndex + 2] = 0;
- nDebugStorage[nDebugIndex + 3] = 0;
-
- nDebugIndex += 4;
- if(nDebugIndex >= nDebugSize)
- {
- nDebugIndex = 0;
- }
-}
-
-/***********************************************************************************/
-
-void PhyDebugLogParam2(uint8_t item, uint8_t param1, uint8_t param2)
-{
- nDebugStorage[nDebugIndex + 0] = item;
- nDebugStorage[nDebugIndex + 1] = param1;
- nDebugStorage[nDebugIndex + 2] = param2;
- nDebugStorage[nDebugIndex + 3] = 0;
-
- nDebugIndex += 4;
- if(nDebugIndex >= nDebugSize)
- {
- nDebugIndex = 0;
- }
-}
-
-/***********************************************************************************/
-
-void PhyDebugLogParam3(uint8_t item, uint8_t param1, uint8_t param2, uint8_t param3)
-{
- nDebugStorage[nDebugIndex + 0] = item;
- nDebugStorage[nDebugIndex + 1] = param1;
- nDebugStorage[nDebugIndex + 2] = param2;
- nDebugStorage[nDebugIndex + 3] = param3;
-
- nDebugIndex += 4;
- if(nDebugIndex >= nDebugSize)
- {
- nDebugIndex = 0;
- }
-}
-
-/***********************************************************************************/
-
-#endif /* MAC_PHY_DEBUG */
-
-
--- a/FSL_IEEE_802_15_4/PHY/PhyDebug.h Fri Jul 31 13:49:46 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,145 +0,0 @@
-/*!
-* Copyright (c) 2015, Freescale Semiconductor, Inc.
-* All rights reserved.
-*
-* \file PhyDebug.h
-*
-* Redistribution and use in source and binary forms, with or without modification,
-* are permitted provided that the following conditions are met:
-*
-* o Redistributions of source code must retain the above copyright notice, this list
-* of conditions and the following disclaimer.
-*
-* o Redistributions in binary form must reproduce the above copyright notice, this
-* list of conditions and the following disclaimer in the documentation and/or
-* other materials provided with the distribution.
-*
-* o Neither the name of Freescale Semiconductor, Inc. nor the names of its
-* contributors may be used to endorse or promote products derived from this
-* software without specific prior written permission.
-*
-* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
-* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
-* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-*/
-
-#ifndef _PHY_DEBUG_H_
-#define _PHY_DEBUG_H_
-
-
-/************************************************************************************
-*************************************************************************************
-* Includes
-*************************************************************************************
-************************************************************************************/
-//#include "MacPhyDebug.h"
-
-
-// a value of zero disables the logging of that event
-#define PDBG_SET_EVENT_TRIGGER 0x01 // 2 parameters
-#define PDBG_SET_EVENT_TIMEOUT 0x02 // 3 parameters
-#define PDBG_DISABLE_EVENT_TIMEOUT 0x03
-#define PDBG_READ_CLOCK 0x04
-#define PDBG_INIT_EVENT_TIMER 0
-
-#define PDBG_WTRMRK_VECT_INTERRUPT 0x06
-#define PDBG_TIMERS_VECT_INTERRUPT 0x07
-#define PDBG_TX_VECT_INTERRUPT 0x08
-#define PDBG_RX_VECT_INTERRUPT 0x09
-
-#define PDBG_CCA_CONFIRM_IDLE 0x0A
-#define PDBG_CCA_CONFIRM_BUSY 0x0B
-#define PDBG_DATA_CONFIRM 0x0C
-#define PDBG_DATA_INDICATION 0x0D
-#define PDBG_ED_CONFIRM 0x0E
-#define PDBG_SYNC_LOSS_INDICATION 0x0F
-
-#define PDBG_UNLOCK_IRQ 0x10
-#define PDBG_WTRMARK_IRQ 0x11
-#define PDBG_START_INDICATION 0x12
-#define PDBG_TIMEOUT_INDICATION 0x13
-#define PDBG_TMR1_IRQ 0x14
-#define PDBG_TMR4_IRQ 0x15
-#define PDBG_FILTER_FAIL_IRQ 0x16
-#define PDBG_TX_IRQ 0x17
-#define PDBG_RX_IRQ 0x18 // 1 parameter
-#define PDBG_CCA_IRQ 0x19
-#define PDBG_SEQ_IRQ 0x1A // 1 parameter
-
-#define PDBG_PHY_INIT 0x20
-#define PDBG_PHY_ABORT 0x21
-#define PDBG_PP_SET_PROMISC 0
-#define PDBG_PP_SET_PANID_PAN0 0x23
-#define PDBG_PP_SET_SHORTADDR_PAN0 0x24
-#define PDBG_PP_SET_LONGADDR_PAN0 0x25
-#define PDBG_PP_SET_MACROLE_PAN0 0x26
-#define PDBG_PP_ADD_INDIRECT 0x27 // 1 parameter
-#define PDBG_PP_REMOVE_INDIRECT 0x28 // 1 parameter
-#define PDBG_PP_READ_LATEST_INDEX 0x29 // 1 parameter
-
-#define PDBG_DATA_REQUEST 0x30
-#define PDBG_PLME_RX_REQUEST 0x31
-#define PDBG_PLME_CCA_ED_REQUEST 0x32
-#define PDBG_PLME_SET_CHAN_REQUEST 0x33
-#define PDBG_PLME_SET_POWER_REQUEST 0x34
-#define PDBG_PLME_WAIT_REQUEST 0x35
-
-#define PDBG_PP_SET_PANID_PAN1 0x36
-#define PDBG_PP_SET_SHORTADDR_PAN1 0x37
-#define PDBG_PP_SET_LONGADDR_PAN1 0x38
-#define PDBG_PP_SET_MACROLE_PAN1 0x39
-
-//simple events - without timestamp
-//***** PDBG_MAC_FUNCTION_CALL PDBG_SIMPLE_EVENT // 3 parameters
-#define PDBG_READ_FSM PDBG_SIMPLE_EVENT + 0x01 // 1 parameter
-#define PDBG_FILTER_FAIL_CODE PDBG_SIMPLE_EVENT + 0x02 // 2 parameters
-
-
-#ifdef MAC_PHY_DEBUG
-
-#define DEBUG_LOG_ENTRIES 768
-
-#define PHY_DEBUG_LOG(item) if(PDBG_RESERVED_EVENT!=item){PhyDebugLogTime(item);}
-#define PHY_DEBUG_LOG1(item,param) if(PDBG_RESERVED_EVENT!=item){PhyDebugLogTime(PDBG_EXTENDED_EVENT | item);PhyDebugLogParam1(item,param);}
-#define PHY_DEBUG_LOG2(item,param1,param2) if(PDBG_RESERVED_EVENT!=item){PhyDebugLogTime(PDBG_EXTENDED_EVENT | item);PhyDebugLogParam2(item,param1,param2);}
-#define PHY_DEBUG_LOG3(item,param1,param2,param3) if(PDBG_RESERVED_EVENT!=item){PhyDebugLogTime(PDBG_EXTENDED_EVENT | item);PhyDebugLogParam3(item,param1,param2,param3);}
-
-#define PHY_DEBUG_LOG_SIMPLE1(item,param) if(PDBG_RESERVED_EVENT!=item){PhyDebugLogParam1(item,param);}
-#define PHY_DEBUG_LOG_SIMPLE2(item,param1,param2) if(PDBG_RESERVED_EVENT!=item){PhyDebugLogParam2(item,param1,param2);}
-#define PHY_DEBUG_LOG_SIMPLE3(item,param1,param2,param3) if(PDBG_RESERVED_EVENT!=item){PhyDebugLogParam3(item,param1,param2,param3);}
-
-void PhyUnexpectedTransceiverReset(void);
-
-void PhyDebugLogTime(uint8_t item);
-void PhyDebugLogParam1(uint8_t item, uint8_t param1);
-void PhyDebugLogParam2(uint8_t item, uint8_t param1, uint8_t param2);
-void PhyDebugLogParam3(uint8_t item, uint8_t param1, uint8_t param2, uint8_t param3);
-
-
-#else /* not def MAC_PHY_DEBUG */
-
-#define PhyUnexpectedTransceiverReset()
-
-#define PHY_DEBUG_LOG(item)
-#define PHY_DEBUG_LOG1(item,param)
-#define PHY_DEBUG_LOG2(item,param1,param2)
-#define PHY_DEBUG_LOG3(item,param1,param2,param3)
-
-#define PHY_DEBUG_LOG_SIMPLE1(item,param)
-#define PHY_DEBUG_LOG_SIMPLE2(item,param1,param2)
-#define PHY_DEBUG_LOG_SIMPLE3(item,param1,param2,param3)
-
-#endif /* MAC_PHY_DEBUG */
-
-
-#endif /* _PHY_DEBUG_H_ */
-
-
-
--- a/FSL_IEEE_802_15_4/PHY/PhyISR.c Fri Jul 31 13:49:46 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,580 +0,0 @@
-/*!
-* Copyright (c) 2015, Freescale Semiconductor, Inc.
-* All rights reserved.
-*
-* \file PhyISR.c
-* PHY ISR Functions
-*
-* Redistribution and use in source and binary forms, with or without modification,
-* are permitted provided that the following conditions are met:
-*
-* o Redistributions of source code must retain the above copyright notice, this list
-* of conditions and the following disclaimer.
-*
-* o Redistributions in binary form must reproduce the above copyright notice, this
-* list of conditions and the following disclaimer in the documentation and/or
-* other materials provided with the distribution.
-*
-* o Neither the name of Freescale Semiconductor, Inc. nor the names of its
-* contributors may be used to endorse or promote products derived from this
-* software without specific prior written permission.
-*
-* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
-* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
-* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-*/
-
-/************************************************************************************
-*************************************************************************************
-* Include
-*************************************************************************************
-************************************************************************************/
-#include "EmbeddedTypes.h"
-//#include "board.h"
-#include "MCR20Drv.h"
-#include "MCR20Reg.h"
-#include "Phy.h"
-#include "PhyInterface.h"
-//#include "Gpio_IrqAdapter.h"
-
-//#include "fsl_os_abstraction.h"
-
-#include "XcvrSpi.h"
-
-/************************************************************************************
-*************************************************************************************
-* Private macros
-*************************************************************************************
-************************************************************************************/
-#if defined(MCU_MKL46Z4)
- #define MCR20_Irq_Priority (0xC0)
-#else
- #define MCR20_Irq_Priority (0x80)
-#endif
-
-#define PHY_IRQSTS1_INDEX_c 0x00
-#define PHY_IRQSTS2_INDEX_c 0x01
-#define PHY_IRQSTS3_INDEX_c 0x02
-#define PHY_CTRL1_INDEX_c 0x03
-#define PHY_CTRL2_INDEX_c 0x04
-#define PHY_CTRL3_INDEX_c 0x05
-#define PHY_RX_FRM_LEN_INDEX_c 0x06
-#define PHY_CTRL4_INDEX_c 0x07
-
-/************************************************************************************
-*************************************************************************************
-* Private memory declarations
-*************************************************************************************
-************************************************************************************/
-extern Phy_PhyLocalStruct_t phyLocal[];
-static volatile phyRxParams_t * mpRxParams = NULL;
-static uint32_t mPhyTaskInstance;
-uint8_t mStatusAndControlRegs[8];
-uint8_t mPhyLastRxLQI = 0;
-uint8_t mPhyLastRxRSSI = 0;
-
-void (*gpfPhyPreprocessData)(uint8_t *pData) = NULL;
-
-#if gUsePBTransferThereshold_d
-static uint8_t mPhyWatermarkLevel;
-#define mPhyGetPBTransferThreshold(len) ((len) - 2)
-//#define mPhyGetPBTransferThreshold(len) ((len)*93/100)
-//#define mPhyGetPBTransferThreshold(len) (((len) < 20) ? ((len) - 2) : ((len) * 93 / 100))
-#endif
-
-/************************************************************************************
-*************************************************************************************
-* Public functions
-*************************************************************************************
-************************************************************************************/
-
-/*! *********************************************************************************
-* \brief Sets the current PHY instance waiting for an IRQ
-*
-* \param[in] instanceId instance of the PHY
-*
-********************************************************************************** */
-void PhyIsrPassTaskParams
-(
- instanceId_t instanceId
-)
-{
- mPhyTaskInstance = instanceId;
-}
-
-/*! *********************************************************************************
-* \brief Sets the location of the Rx parameters
-*
-* \param[in] pRxParam pointer to Rx parameters
-*
-********************************************************************************** */
-void PhyIsrPassRxParams
-(
- volatile phyRxParams_t * pRxParam
-)
-{
- mpRxParams = pRxParam;
-}
-
-/*! *********************************************************************************
-* \brief Clear and mask PHY IRQ, set sequence to Idle
-*
-********************************************************************************** */
-void PhyIsrSeqCleanup
-(
- void
-)
-{
- mStatusAndControlRegs[PHY_IRQSTS3_INDEX_c] &= 0xF0;
- mStatusAndControlRegs[PHY_IRQSTS3_INDEX_c] &= (uint8_t) ~( cIRQSTS3_TMR3MSK ); // unmask TMR3 interrupt
- mStatusAndControlRegs[PHY_CTRL1_INDEX_c] &= (uint8_t) ~( cPHY_CTRL1_XCVSEQ );
- mStatusAndControlRegs[PHY_CTRL2_INDEX_c] |= (uint8_t) ( cPHY_CTRL2_CCAMSK | \
- cPHY_CTRL2_RXMSK | \
- cPHY_CTRL2_TXMSK | \
- cPHY_CTRL2_SEQMSK );
-
- // clear transceiver interrupts, mask SEQ, RX, TX and CCA interrupts and set the PHY sequencer back to IDLE
- MCR20Drv_DirectAccessSPIMultiByteWrite(IRQSTS1, mStatusAndControlRegs, 5);
-}
-
-/*! *********************************************************************************
-* \brief Clear and mask PHY IRQ, disable timeout, set sequence to Idle
-*
-********************************************************************************** */
-void PhyIsrTimeoutCleanup
-(
- void
-)
-{
- mStatusAndControlRegs[PHY_IRQSTS3_INDEX_c] &= 0xF0;
- mStatusAndControlRegs[PHY_IRQSTS3_INDEX_c] |= (uint8_t) ( cIRQSTS3_TMR3MSK | \
- cIRQSTS3_TMR3IRQ); // mask and clear TMR3 interrupt
- mStatusAndControlRegs[PHY_CTRL1_INDEX_c] &= (uint8_t) ~( cPHY_CTRL1_XCVSEQ );
- mStatusAndControlRegs[PHY_CTRL2_INDEX_c] |= (uint8_t) ( cPHY_CTRL2_CCAMSK | \
- cPHY_CTRL2_RXMSK | \
- cPHY_CTRL2_TXMSK | \
- cPHY_CTRL2_SEQMSK );
-
- // disable TMR3 comparator and timeout
- mStatusAndControlRegs[PHY_CTRL3_INDEX_c] &= (uint8_t) ~( cPHY_CTRL3_TMR3CMP_EN );
- mStatusAndControlRegs[PHY_CTRL4_INDEX_c] &= (uint8_t) ~( cPHY_CTRL4_TC3TMOUT );
-
- // clear transceiver interrupts, mask mask SEQ, RX, TX, TMR3 and CCA interrupts interrupts and set the PHY sequencer back to IDLE
- MCR20Drv_DirectAccessSPIMultiByteWrite(IRQSTS1, mStatusAndControlRegs, 8);
-}
-
-/*! *********************************************************************************
-* \brief Scales energy level to 0-255
-*
-* \param[in] energyLevel the energ level reported by HW
-*
-* \return uint8_t the energy level scaled in 0x00-0xFF
-*
-********************************************************************************** */
-uint8_t Phy_GetEnergyLevel
-(
-uint8_t energyLevel /* db */
-)
-{
- if(energyLevel >= 90)
- {
- /* ED value is below minimum. Return 0x00. */
- energyLevel = 0x00;
- }
- else if(energyLevel <= 26)
- {
- /* ED value is above maximum. Return 0xFF. */
- energyLevel = 0xFF;
- }
- else
- {
- /* Energy level (-90 dBm to -26 dBm ) --> varies form 0 to 64 */
- energyLevel = (90 - energyLevel);
- /* Rescale the energy level values to the 0x00-0xff range (0 to 64 translates in 0 to 255) */
- /* energyLevel * 3.9844 ~= 4 */
- /* Multiply with 4=2^2 by shifting left.
- The multiplication will not overflow beacause energyLevel has values between 0 and 63 */
- energyLevel <<= 2;
- }
-
- return energyLevel;
-}
-
-/*! *********************************************************************************
-* \brief Scales LQI to 0-255
-*
-* \param[in] hwLqi the LQI reported by HW
-*
-* \return uint8_t the LQI scaled in 0x00-0xFF
-*
-********************************************************************************** */
-static uint8_t Phy_LqiConvert
-(
-uint8_t hwLqi
-)
-{
- uint32_t tmpLQI;
-
- /* LQI Saturation Level */
- if (hwLqi >= 230)
- {
- return 0xFF;
- }
- else if (hwLqi <= 9)
- {
- return 0;
- }
- else
- {
- /* Rescale the LQI values from min to saturation to the 0x00 - 0xFF range */
- /* The LQI value mst be multiplied by ~1.1087 */
- /* tmpLQI = hwLqi * 7123 ~= hwLqi * 65536 * 0.1087 = hwLqi * 2^16 * 0.1087*/
- tmpLQI = ((uint32_t)hwLqi * (uint32_t)7123 );
- /* tmpLQI = (tmpLQI / 2^16) + hwLqi */
- tmpLQI = (uint32_t)(tmpLQI >> 16) + (uint32_t)hwLqi;
-
- return (uint8_t)tmpLQI;
- }
-}
-
-/*! *********************************************************************************
-* \brief This function returns the LQI for the las received packet
-*
-* \return uint8_t LQI value
-*
-********************************************************************************** */
-uint8_t PhyGetLastRxLqiValue(void)
-{
- return mPhyLastRxLQI;
-}
-
-/*! *********************************************************************************
-* \brief This function returns the RSSI for the las received packet
-*
-* \return uint8_t RSSI value
-*
-********************************************************************************** */
-uint8_t PhyGetLastRxRssiValue(void)
-{
- uint32_t tempRSSI = mPhyLastRxRSSI;
- uint8_t comp = MCR20Drv_IndirectAccessSPIRead(LQI_OFFSET_COMP);
- tempRSSI += comp;
- tempRSSI >>= 1;
- comp >>=1;
- if(25*(tempRSSI+comp) > 4360)
- {
- return mPhyLastRxRSSI;
- }
- /*liniarization
- 4360 - 25* RSSI (4360 - 25* RSSI)*7085 >> 18;
- abs(rssi)=--------------- <=>
- 37
- */
- tempRSSI = ((4360 - 25*(tempRSSI + comp))*7085)>>18;
- return (uint8_t)(0x000000FF & tempRSSI);
-}
-
-/*! *********************************************************************************
-* \brief PHY ISR
-*
-********************************************************************************** */
-void PHY_InterruptHandler(void)
-{
- uint8_t xcvseqCopy;
-
- /* The ISR may be called even if another PORTx pin has changed */
- //if( !PORT_HAL_IsPinIntPending(g_portBaseAddr[GPIO_EXTRACT_PORT(kGpioXcvrIrqPin)], GPIO_EXTRACT_PIN(kGpioXcvrIrqPin)) )
- if( !RF_isIRQ_Pending() )
- {
- return;
- }
-
- /* Disable and clear transceiver(IRQ_B) interrupt */
- MCR20Drv_IRQ_Disable();
- MCR20Drv_IRQ_Clear();
-
- /* Read transceiver interrupt status and control registers */
- mStatusAndControlRegs[PHY_IRQSTS1_INDEX_c] =
- MCR20Drv_DirectAccessSPIMultiByteRead(IRQSTS2, &mStatusAndControlRegs[1], 7);
- xcvseqCopy = mStatusAndControlRegs[PHY_CTRL1_INDEX_c] & cPHY_CTRL1_XCVSEQ;
- /* clear transceiver interrupts */
- MCR20Drv_DirectAccessSPIMultiByteWrite(IRQSTS1, mStatusAndControlRegs, 3);
-
- if( (mStatusAndControlRegs[PHY_IRQSTS2_INDEX_c] & cIRQSTS2_WAKE_IRQ) &&
- !(mStatusAndControlRegs[PHY_CTRL3_INDEX_c] & cPHY_CTRL3_WAKE_MSK) )
- {
-#ifdef MAC_PHY_DEBUG
- Radio_Phy_UnexpectedTransceiverReset(mPhyTaskInstance);
-#endif
- MCR20Drv_IRQ_Enable();
- return;
- }
-
- /* Flter Fail IRQ */
- if( (mStatusAndControlRegs[PHY_IRQSTS1_INDEX_c] & cIRQSTS1_FILTERFAIL_IRQ) &&
- !(mStatusAndControlRegs[PHY_CTRL2_INDEX_c] & cPHY_CTRL2_FILTERFAIL_MSK) )
- {
-#if gUsePBTransferThereshold_d
- /* Reset the RX_WTR_MARK level since packet was dropped. */
- mPhyWatermarkLevel = 0;
- MCR20Drv_IndirectAccessSPIWrite(RX_WTR_MARK, mPhyWatermarkLevel);
-#endif
- Radio_Phy_PlmeFilterFailRx(mPhyTaskInstance);
- }
- /* Rx Watermark IRQ */
- else if( (mStatusAndControlRegs[PHY_IRQSTS1_INDEX_c] & cIRQSTS1_RXWTRMRKIRQ) &&
- !(mStatusAndControlRegs[PHY_CTRL2_INDEX_c] & cPHY_CTRL2_RX_WMRK_MSK) )
- {
-#if gUsePBTransferThereshold_d
- if( 0 == mPhyWatermarkLevel )
- {
- /* Check if this is a standalone RX because we could end up here during a TR sequence also. */
- if( xcvseqCopy == gRX_c )
- {
- /* Set the thereshold packet length at which to start the PB Burst Read.*/
- mPhyWatermarkLevel = mPhyGetPBTransferThreshold( mStatusAndControlRegs[PHY_RX_FRM_LEN_INDEX_c] );
- MCR20Drv_IndirectAccessSPIWrite(RX_WTR_MARK, mPhyWatermarkLevel);
- }
-#endif
- Radio_Phy_PlmeRxSfdDetect(mPhyTaskInstance, mStatusAndControlRegs[PHY_RX_FRM_LEN_INDEX_c]);
-#if gUsePBTransferThereshold_d
- }
- else
- {
- /* Reset RX_WTR_MARK here, because if the FCS fails, no other IRQ will arrive
- * and the RX will restart automatically. */
- mPhyWatermarkLevel = 0;
- MCR20Drv_IndirectAccessSPIWrite(RX_WTR_MARK, mPhyWatermarkLevel);
-
- if( mpRxParams )
- {
- // Read data from PB
- MCR20Drv_PB_SPIBurstRead(mpRxParams->pRxData->msgData.dataInd.pPsdu, (uint8_t)(mStatusAndControlRegs[PHY_RX_FRM_LEN_INDEX_c] - 2));
- if( gpfPhyPreprocessData )
- gpfPhyPreprocessData(mpRxParams->pRxData->msgData.dataInd.pPsdu);
- }
- }
-#endif
- }
-
- /* Timer 1 Compare Match */
- if( (mStatusAndControlRegs[PHY_IRQSTS3_INDEX_c] & cIRQSTS3_TMR1IRQ) &&
- !(mStatusAndControlRegs[PHY_IRQSTS3_INDEX_c] & cIRQSTS3_TMR1MSK))
- {
- // disable TMR1 comparator
- mStatusAndControlRegs[PHY_CTRL3_INDEX_c] &= (uint8_t) ~( cPHY_CTRL3_TMR1CMP_EN);
- MCR20Drv_DirectAccessSPIWrite(PHY_CTRL3, mStatusAndControlRegs[PHY_CTRL3_INDEX_c]);
-
- Radio_Phy_TimeWaitTimeoutIndication(mPhyTaskInstance);
- }
-
- /* Sequencer interrupt, the autosequence has completed */
- if( (mStatusAndControlRegs[PHY_IRQSTS1_INDEX_c] & cIRQSTS1_SEQIRQ) &&
- !(mStatusAndControlRegs[PHY_CTRL2_INDEX_c] & cPHY_CTRL2_SEQMSK) )
- {
- // PLL unlock, the autosequence has been aborted due to PLL unlock
- if( mStatusAndControlRegs[PHY_IRQSTS1_INDEX_c] & cIRQSTS1_PLL_UNLOCK_IRQ )
- {
- PhyIsrSeqCleanup();
- Radio_Phy_PlmeSyncLossIndication(mPhyTaskInstance);
- MCR20Drv_IRQ_Enable();
- return;
- }
-
- // TMR3 timeout, the autosequence has been aborted due to TMR3 timeout
- if( (mStatusAndControlRegs[PHY_IRQSTS3_INDEX_c] & cIRQSTS3_TMR3IRQ) &&
- !(mStatusAndControlRegs[PHY_IRQSTS1_INDEX_c] & cIRQSTS1_RXIRQ) &&
- (gTX_c != xcvseqCopy) )
- {
- PhyIsrTimeoutCleanup();
-
- Radio_Phy_TimeRxTimeoutIndication(mPhyTaskInstance);
- MCR20Drv_IRQ_Enable();
- return;
- }
-
- PhyIsrSeqCleanup();
-
- switch(xcvseqCopy)
- {
- case gTX_c:
- if( (mStatusAndControlRegs[PHY_IRQSTS2_INDEX_c] & cIRQSTS2_CCA) &&
- (mStatusAndControlRegs[PHY_CTRL1_INDEX_c] & cPHY_CTRL1_CCABFRTX) )
- {
- Radio_Phy_PlmeCcaConfirm(gPhyChannelBusy_c, mPhyTaskInstance);
- }
- else
- {
- Radio_Phy_PdDataConfirm(mPhyTaskInstance, FALSE);
- }
- break;
-
- case gTR_c:
- if( (mStatusAndControlRegs[PHY_IRQSTS2_INDEX_c] & cIRQSTS2_CCA) &&
- (mStatusAndControlRegs[PHY_CTRL1_INDEX_c] & cPHY_CTRL1_CCABFRTX) )
- {
- Radio_Phy_PlmeCcaConfirm(gPhyChannelBusy_c, mPhyTaskInstance);
- }
- else
- {
- if(NULL != mpRxParams)
- {
- // reports value of 0x00 for -105 dBm of received input power and 0xFF for 0 dBm of received input power
- mPhyLastRxRSSI = MCR20Drv_DirectAccessSPIRead((uint8_t) LQI_VALUE);
- mpRxParams->linkQuality = Phy_LqiConvert(mPhyLastRxRSSI);
- mPhyLastRxLQI = mpRxParams->linkQuality;
- MCR20Drv_DirectAccessSPIMultiByteRead( (uint8_t) TIMESTAMP_LSB, (uint8_t *)&mpRxParams->timeStamp, 3);
- mpRxParams->psduLength = (uint8_t)(mStatusAndControlRegs[PHY_RX_FRM_LEN_INDEX_c]); //Including FCS (2 bytes)
- }
- if( (mStatusAndControlRegs[PHY_IRQSTS1_INDEX_c] & cIRQSTS1_RX_FRM_PEND) == cIRQSTS1_RX_FRM_PEND )
- {
- Radio_Phy_PdDataConfirm(mPhyTaskInstance, TRUE);
- }
- else
- {
- Radio_Phy_PdDataConfirm(mPhyTaskInstance, FALSE);
- }
- }
- break;
-
- case gRX_c:
- if( NULL != mpRxParams )
- {
- // reports value of 0x00 for -105 dBm of received input power and 0xFF for 0 dBm of received input power
- mPhyLastRxRSSI = MCR20Drv_DirectAccessSPIRead((uint8_t) LQI_VALUE);
- mpRxParams->linkQuality = Phy_LqiConvert(mPhyLastRxRSSI);
- mPhyLastRxLQI = mpRxParams->linkQuality;
- MCR20Drv_DirectAccessSPIMultiByteRead( (uint8_t) TIMESTAMP_LSB, (uint8_t *)&mpRxParams->timeStamp, 3);
- mpRxParams->psduLength = (uint8_t)(mStatusAndControlRegs[PHY_RX_FRM_LEN_INDEX_c]); //Including FCS (2 bytes)
- }
- Radio_Phy_PdDataIndication(mPhyTaskInstance);
- break;
-
- case gCCA_c:
- if( (mStatusAndControlRegs[PHY_CTRL4_INDEX_c] & (cPHY_CTRL4_CCATYPE << cPHY_CTRL4_CCATYPE_Shift_c)) == (gCcaED_c << cPHY_CTRL4_CCATYPE_Shift_c) )
- {
- // Ed
- Radio_Phy_PlmeEdConfirm(MCR20Drv_DirectAccessSPIRead((uint8_t) CCA1_ED_FNL), mPhyTaskInstance);
- }
- else
- {
- // CCA
- if( mStatusAndControlRegs[PHY_IRQSTS2_INDEX_c] & cIRQSTS2_CCA )
- {
-#if (gUseStandaloneCCABeforeTx_d == 1)
- phyLocal[mPhyTaskInstance].txParams.numOfCca = 0;
-#endif
- Radio_Phy_PlmeCcaConfirm(gPhyChannelBusy_c, mPhyTaskInstance);
- }
- else
- {
-#if (gUseStandaloneCCABeforeTx_d == 1)
- if( phyLocal[mPhyTaskInstance].txParams.numOfCca > 0 )
- {
- mStatusAndControlRegs[PHY_CTRL1] &= (uint8_t) ~(cPHY_CTRL1_XCVSEQ);
-
- if( --phyLocal[mPhyTaskInstance].txParams.numOfCca == 0 )
- {
- // perform TxRxAck sequence if required by phyTxMode
- if( gPhyRxAckRqd_c == phyLocal[mPhyTaskInstance].txParams.ackRequired )
- {
- mStatusAndControlRegs[PHY_CTRL1] |= (uint8_t) (cPHY_CTRL1_RXACKRQD);
- mStatusAndControlRegs[PHY_CTRL1] |= gTR_c;
- }
- else
- {
- mStatusAndControlRegs[PHY_CTRL1] &= (uint8_t) ~(cPHY_CTRL1_RXACKRQD);
- mStatusAndControlRegs[PHY_CTRL1] |= gTX_c;
- }
- }
- else
- {
- mStatusAndControlRegs[PHY_CTRL1] |= gCCA_c;
- }
-
- mStatusAndControlRegs[PHY_CTRL2] &= (uint8_t) ~(cPHY_CTRL2_SEQMSK); // unmask SEQ interrupt
- // start the sequence immediately
- MCR20Drv_DirectAccessSPIMultiByteWrite(PHY_CTRL1,
- &mStatusAndControlRegs[PHY_CTRL1],
- 2);
- }
- else
-#endif
- {
- Radio_Phy_PlmeCcaConfirm(gPhyChannelIdle_c, mPhyTaskInstance);
- }
- }
- }
- break;
-
- case gCCCA_c:
- Radio_Phy_PlmeCcaConfirm(gPhyChannelIdle_c, mPhyTaskInstance);
- break;
-
- default:
- Radio_Phy_PlmeSyncLossIndication(mPhyTaskInstance);
- break;
- }
- }
- // timers interrupt
- else
- {
- if( mStatusAndControlRegs[PHY_IRQSTS3_INDEX_c] & cIRQSTS3_TMR2IRQ )
- {
- // disable TMR2 comparator and time triggered action
- mStatusAndControlRegs[PHY_CTRL3_INDEX_c] &= (uint8_t) ~( cPHY_CTRL3_TMR2CMP_EN);
- mStatusAndControlRegs[PHY_CTRL1_INDEX_c] &= (uint8_t) ~( cPHY_CTRL1_TMRTRIGEN);
-
- MCR20Drv_DirectAccessSPIWrite(PHY_CTRL3, mStatusAndControlRegs[PHY_CTRL3_INDEX_c]);
- MCR20Drv_DirectAccessSPIWrite(PHY_CTRL1, mStatusAndControlRegs[PHY_CTRL1_INDEX_c]);
-
- Radio_Phy_TimeStartEventIndication(mPhyTaskInstance);
- }
-
- if( mStatusAndControlRegs[PHY_IRQSTS3_INDEX_c] & cIRQSTS3_TMR3IRQ )
- {
- /* disable TMR3 comparator and timeout */
- mStatusAndControlRegs[PHY_CTRL3_INDEX_c] &= (uint8_t) ~( cPHY_CTRL3_TMR3CMP_EN);
- mStatusAndControlRegs[PHY_CTRL4_INDEX_c] &= (uint8_t) ~( cPHY_CTRL4_TC3TMOUT);
-
- MCR20Drv_DirectAccessSPIWrite(PHY_CTRL3, mStatusAndControlRegs[PHY_CTRL3_INDEX_c]);
- MCR20Drv_DirectAccessSPIWrite(PHY_CTRL4, mStatusAndControlRegs[PHY_CTRL4_INDEX_c]);
-
- /* Ensure that we're not issuing TimeoutIndication while the Automated sequence is still in progress */
- /* TMR3 can expire during R-T turnaround for example, case in which the sequence is not interrupted */
- if( gIdle_c == xcvseqCopy )
- {
- Radio_Phy_TimeRxTimeoutIndication(mPhyTaskInstance);
- }
- }
-
- /* Timer 4 Compare Match */
- if( mStatusAndControlRegs[PHY_IRQSTS3_INDEX_c] & cIRQSTS3_TMR4IRQ )
- {
- /* disable TMR4 comparator */
- mStatusAndControlRegs[PHY_CTRL3_INDEX_c] &= (uint8_t) ~( cPHY_CTRL3_TMR4CMP_EN);
- MCR20Drv_DirectAccessSPIWrite(PHY_CTRL3, mStatusAndControlRegs[PHY_CTRL3_INDEX_c]);
- }
- }
-
- MCR20Drv_IRQ_Enable();
-}
-
-/*! *********************************************************************************
-* \brief This function installs the PHY ISR
-*
-********************************************************************************** */
-void PHY_InstallIsr( void )
-{
- /*Initialise RF interrupt pin*/
- RF_IRQ_Init();
-
- //GpioInstallIsr(PHY_InterruptHandler, gGpioIsrPrioHigh_c, MCR20_Irq_Priority, kGpioXcvrIrqPin);
-}
--- a/FSL_IEEE_802_15_4/PHY/PhyInterface.h Fri Jul 31 13:49:46 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,352 +0,0 @@
-/*!
-* Copyright (c) 2015, Freescale Semiconductor, Inc.
-* All rights reserved.
-*
-* \file PhyInterface.h
-*
-* Redistribution and use in source and binary forms, with or without modification,
-* are permitted provided that the following conditions are met:
-*
-* o Redistributions of source code must retain the above copyright notice, this list
-* of conditions and the following disclaimer.
-*
-* o Redistributions in binary form must reproduce the above copyright notice, this
-* list of conditions and the following disclaimer in the documentation and/or
-* other materials provided with the distribution.
-*
-* o Neither the name of Freescale Semiconductor, Inc. nor the names of its
-* contributors may be used to endorse or promote products derived from this
-* software without specific prior written permission.
-*
-* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
-* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
-* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-*/
-
-#ifndef _PHY_INTERFACE_H
-#define _PHY_INTERFACE_H
-
-
-/************************************************************************************
-*************************************************************************************
-* Include
-*************************************************************************************
-************************************************************************************/
-
-#include "PhyTypes.h"
-//#include "Messaging.h"
-#include "PhyConfig.h"
-
-/************************************************************************************
-*************************************************************************************
-* Public macros
-*************************************************************************************
-************************************************************************************/
-
-/* Constants */
-#ifndef gMaxPhyTimers_c
-#define gMaxPhyTimers_c (5)
-#endif
-
-#ifdef gPHY_802_15_4g_d
-#define gPhySeqStartAsap_c (0xFFFFFFFFFFFFFFFF)
-#else
-#define gPhySeqStartAsap_c (0xFFFFFFFF)
-#endif
-
-/* XCVR active/idle power modes */
-#define gPhyDefaultActivePwrMode_c gPhyPwrAutodoze_c /* Do not change! */
-#define gPhyDefaultIdlePwrMode_c gPhyPwrAutodoze_c
-
-/************************************************************************************
-*************************************************************************************
-* Public prototypes
-*************************************************************************************
-************************************************************************************/
-
-/************************************************************************************
-*************************************************************************************
-* Public type definitions
-*************************************************************************************
-************************************************************************************/
-
-typedef enum
-{
-#include "PhyMessages.h"
-}phyMessageId_t;
-
-typedef enum{
- gPhyPwrIdle_c,
- gPhyPwrAutodoze_c,
- gPhyPwrDoze_c,
- gPhyPwrHibernate_c,
- gPhyPwrReset_c
-}phyPwrMode_t;
-
-typedef struct pdDataReq_tag
-{
- phyTime_t startTime; // absolute
- uint32_t txDuration; // relative
- phySlottedMode_t slottedTx;
- phyCCAType_t CCABeforeTx;
- phyAckRequired_t ackRequired;
- uint8_t psduLength;
-#ifdef gPHY_802_15_4g_d
- phyPHR_t phyHeader;
- uint8_t macDataIndex;
- uint8_t fillFifoBlockLength;
-#endif // gPHY_802_15_4g_d
- uint8_t * pPsdu;
-} pdDataReq_t;
-
-typedef struct pdDataCnf_tag
-{
- phyStatus_t status;
-} pdDataCnf_t;
-
-typedef struct pdDataInd_tag
-{
- phyTimeTimestamp_t timeStamp;
- uint8_t ppduLinkQuality;
- uint8_t psduLength;
- uint8_t * pPsdu;
-#ifdef gPHY_802_15_4g_d
- uint32_t crcValue;
- bool_t crcValid;
-#endif
-} pdDataInd_t;
-
-typedef struct pdIndQueueInsertReq_tag
-{
- uint8_t index;
- uint16_t checksum;
-} pdIndQueueInsertReq_t;
-
-typedef struct pdIndQueueInsertCnf_tag
-{
- phyStatus_t status;
-} pdIndQueueInsertCnf_t;
-
-typedef struct pdIndQueueRemoveReq_tag
-{
- uint8_t index;
-} pdIndQueueRemoveReq_t;
-
-typedef struct plmeEdReq_tag
-{
- phyTime_t startTime; // absolute
-} plmeEdReq_t;
-
-typedef struct plmeCcaReq_tag
-{
- phyCCAType_t ccaType;
- phyContCCAMode_t contCcaMode;
-} plmeCcaReq_t;
-
-typedef struct plmeCcaCnf_tag
-{
- phyStatus_t status;
-} plmeCcaCnf_t;
-
-typedef struct plmeEdCnf_tag
-{
- phyStatus_t status;
- uint8_t energyLevel;
- uint8_t energyLeveldB;
-} plmeEdCnf_t;
-
-typedef struct plmeSetTRxStateReq_tag
-{
- phyState_t state;
- phySlottedMode_t slottedMode;
- phyTime_t startTime; // absolute
- uint32_t rxDuration; // relative
-} plmeSetTRxStateReq_t;
-
-typedef struct phyTimeEvent_tag
-{
- phyTimeTimestamp_t timestamp; // absolute
- phyTimeCallback_t callback;
- uint32_t parameter;
-}phyTimeEvent_t;
-
-typedef struct plmeSetTRxStateCnf_tag
-{
- phyStatus_t status;
-} plmeSetTRxStateCnf_t;
-
-typedef struct plmeSetReq_tag
-{
- phyPibId_t PibAttribute;
- uint64_t PibAttributeValue;
-} plmeSetReq_t;
-
-typedef struct plmeSetCnf_tag
-{
- phyStatus_t status;
- phyPibId_t PibAttribute;
-} plmeSetCnf_t;
-
-typedef struct plmeGetReq_tag
-{
- phyPibId_t PibAttribute;
- uint64_t * pPibAttributeValue;
-} plmeGetReq_t;
-
-typedef struct plmeGetCnf_tag
-{
- phyStatus_t status;
- phyPibId_t PibAttribute;
- uint64_t PibAttributeValue;
-} plmeGetCnf_t;
-
-typedef struct macToPlmeMessage_tag
-{
- phyMessageId_t msgType;
- uint8_t macInstance;
- union
- {
- plmeEdReq_t edReq;
- plmeCcaReq_t ccaReq;
- plmeSetTRxStateReq_t setTRxStateReq;
- plmeSetReq_t setReq;
- plmeGetReq_t getReq;
- }msgData;
-} macToPlmeMessage_t;
-
-typedef struct macToPdDataMessage_tag
-{
- phyMessageId_t msgType;
- uint8_t macInstance;
- union
- {
- pdDataReq_t dataReq;
- pdIndQueueInsertReq_t indQueueInsertReq;
- pdIndQueueRemoveReq_t indQueueRemoveReq;
- }msgData;
-} macToPdDataMessage_t;
-
-typedef struct plmeToMacMessage_tag
-{
- phyMessageId_t msgType;
- uint8_t macInstance;
- union
- {
- plmeCcaCnf_t ccaCnf;
- plmeEdCnf_t edCnf;
- plmeSetTRxStateCnf_t setTRxStateCnf;
- plmeSetCnf_t setCnf;
- plmeGetCnf_t getCnf;
- }msgData;
-} plmeToMacMessage_t;
-
-typedef struct pdDataToMacMessage_tag
-{
- phyMessageId_t msgType;
- uint8_t macInstance;
- union
- {
- pdDataCnf_t dataCnf;
- pdDataInd_t dataInd;
- pdIndQueueInsertCnf_t indQueueInsertCnf;
- }msgData;
-} pdDataToMacMessage_t;
-
-typedef struct phyMessageHeader_tag
-{
- phyMessageId_t msgType;
- uint8_t macInstance;
-} phyMessageHeader_t;
-
-typedef struct phyRxParams_tag {
- phyTime_t timeStamp;
- uint8_t psduLength;
- uint8_t linkQuality;
-#ifdef gPHY_802_15_4g_d
- uint8_t headerLength;
- uint8_t macDataIndex;
- uint8_t unfillFifoBlockLength;
- phyPHR_t phyHeader;
-#else
- phySlottedMode_t phyRxMode;
- pdDataToMacMessage_t *pRxData;
-#endif // gPHY_802_15_4g_d
-} phyRxParams_t;
-
-typedef struct phyChannelParams_tag {
- union{
- phyStatus_t channelStatus;
- uint8_t energyLeveldB;
- };
-#ifdef gPHY_802_15_4g_d
- uint8_t ccaThreshold;
- uint8_t ccaParam;
-#endif // gPHY_802_15_4g_d
-} phyChannelParams_t;
-
-typedef struct phyTxParams_tag {
- uint8_t numOfCca;
- phyAckRequired_t ackRequired;
-} phyTxParams_t;
-
-typedef phyStatus_t ( * PD_MAC_SapHandler_t)(pdDataToMacMessage_t * pMsg, instanceId_t instanceId);
-
-typedef phyStatus_t ( * PLME_MAC_SapHandler_t)(plmeToMacMessage_t * pMsg, instanceId_t instanceId);
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/************************************************************************************
-*************************************************************************************
-* Public memory declarations
-*************************************************************************************
-************************************************************************************/
-extern const uint8_t gPhyIndirectQueueSize_c;
-
-/************************************************************************************
-*************************************************************************************
-* Public functions
-*************************************************************************************
-************************************************************************************/
-
-void Phy_Init( void );
-
-instanceId_t BindToPHY( instanceId_t macInstance );
-
-// SAPs
-void Phy_RegisterSapHandlers(PD_MAC_SapHandler_t pPD_MAC_SapHandler, PLME_MAC_SapHandler_t pPLME_MAC_SapHandler, instanceId_t instanceId);
-
-phyStatus_t MAC_PD_SapHandler(macToPdDataMessage_t * pMsg, instanceId_t phyInstance);
-
-phyStatus_t MAC_PLME_SapHandler(macToPlmeMessage_t * pMsg, instanceId_t phyInstance);
-
-// PHY Time
-void PhyTime_Maintenance ( void );
-
-void PhyTime_RunCallback ( void );
-
-void PhyTime_ISR ( void );
-
-phyTimeStatus_t PhyTime_TimerInit ( void (*cb)(void) );
-
-phyTimeTimestamp_t PhyTime_GetTimestamp ( void );
-
-phyTimeTimerId_t PhyTime_ScheduleEvent( phyTimeEvent_t *pEvent );
-
-phyTimeStatus_t PhyTime_CancelEvent ( phyTimeTimerId_t timerId );
-
-phyTimeStatus_t PhyTime_CancelEventsWithParam ( uint32_t param );
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* _PHY_INTERFACE_H */
--- a/FSL_IEEE_802_15_4/PHY/PhyMessages.h Fri Jul 31 13:49:46 2015 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,106 +0,0 @@ -/*! -* Copyright (c) 2015, Freescale Semiconductor, Inc. -* All rights reserved. -* -* \file PhyMessages.h -* -* Redistribution and use in source and binary forms, with or without modification, -* are permitted provided that the following conditions are met: -* -* o Redistributions of source code must retain the above copyright notice, this list -* of conditions and the following disclaimer. -* -* o Redistributions in binary form must reproduce the above copyright notice, this -* list of conditions and the following disclaimer in the documentation and/or -* other materials provided with the distribution. -* -* o Neither the name of Freescale Semiconductor, Inc. nor the names of its -* contributors may be used to endorse or promote products derived from this -* software without specific prior written permission. -* -* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR -* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -*/ - -#ifndef _PHY_MESSAGES_H -#define _PHY_MESSAGES_H - - -/************************************************************************************ -************************************************************************************* -* Include -************************************************************************************* -************************************************************************************/ - -/************************************************************************************ -************************************************************************************* -* Public macros -************************************************************************************* -************************************************************************************/ - -/************************************************************************************ -************************************************************************************* -* Public prototypes -************************************************************************************* -************************************************************************************/ - -/************************************************************************************ -************************************************************************************* -* Public type definitions -************************************************************************************* -************************************************************************************/ - -/************************************************************************************ -************************************************************************************* -* Public memory declarations -************************************************************************************* -************************************************************************************/ - -/************************************************************************************ -************************************************************************************* -* Public functions -************************************************************************************* -************************************************************************************/ - -/* 802.15.4-2006 standard PHY PD and PLME API messages */ - gPdDataReq_c, - gPdDataCnf_c, - gPdDataInd_c, - - gPdIndQueueInsertReq_c, - gPdIndQueueInsertCnf_c, - gPdIndQueueRemoveReq_c, - - gPlmeCcaReq_c, - gPlmeCcaCnf_c, - - gPlmeEdReq_c, - gPlmeEdCnf_c, - - gPlmeSetTRxStateReq_c, - gPlmeSetTRxStateCnf_c, - - gPlmeSetReq_c, - gPlmeSetCnf_c, - - gPlmeGetReq_c, - gPlmeGetCnf_c, - - gPlmeTimeoutInd_c, - - gPlme_StartEventInd_c, - gPlme_SyncLossInd_c, - gPlme_RxSfdDetectInd_c, - gPlme_FilterFailInd_c, - gPlme_UnexpectedRadioResetInd_c, - - -#endif /* _PHY_MESSAGES_H */
--- a/FSL_IEEE_802_15_4/PHY/PhyPacketProcessor.c Fri Jul 31 13:49:46 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,1136 +0,0 @@
-/*!
-* Copyright (c) 2015, Freescale Semiconductor, Inc.
-* All rights reserved.
-*
-* \file PhyPacketProcessor.c
-*
-* Redistribution and use in source and binary forms, with or without modification,
-* are permitted provided that the following conditions are met:
-*
-* o Redistributions of source code must retain the above copyright notice, this list
-* of conditions and the following disclaimer.
-*
-* o Redistributions in binary form must reproduce the above copyright notice, this
-* list of conditions and the following disclaimer in the documentation and/or
-* other materials provided with the distribution.
-*
-* o Neither the name of Freescale Semiconductor, Inc. nor the names of its
-* contributors may be used to endorse or promote products derived from this
-* software without specific prior written permission.
-*
-* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
-* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
-* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-*/
-
-
-/************************************************************************************
-*************************************************************************************
-* Include
-*************************************************************************************
-************************************************************************************/
-#include "EmbeddedTypes.h"
-#include "MCR20Drv.h"
-#include "MCR20Reg.h"
-#include "MCR20Overwrites.h"
-
-#include "Phy.h"
-#include "MpmInterface.h"
-
-#if 0
-#include "board.h"
-#include "fsl_os_abstraction.h"
-#include "fsl_gpio_driver.h"
-
-extern const IRQn_Type g_portIrqId[HW_PORT_INSTANCE_COUNT];
-#endif
-/************************************************************************************
-*************************************************************************************
-* Public macros
-*************************************************************************************
-************************************************************************************/
-
-// Address mode indentifiers. Used for both network and MAC interfaces
-#define gPhyAddrModeNoAddr_c (0)
-#define gPhyAddrModeInvalid_c (1)
-#define gPhyAddrMode16BitAddr_c (2)
-#define gPhyAddrMode64BitAddr_c (3)
-
-#define PHY_MIN_RNG_DELAY 4
-
-/************************************************************************************
-*************************************************************************************
-* Private variables
-*************************************************************************************
-************************************************************************************/
-
-const uint8_t gPhyIdlePwrState = gPhyDefaultIdlePwrMode_c;
-const uint8_t gPhyActivePwrState = gPhyDefaultActivePwrMode_c;
-
-const uint8_t gPhyIndirectQueueSize_c = 12;
-static uint8_t mPhyCurrentSamLvl = 12;
-static uint8_t mPhyPwrState = gPhyPwrIdle_c;
-
-/************************************************************************************
-*************************************************************************************
-* Public Functions
-*************************************************************************************
-************************************************************************************/
-
-
-/*---------------------------------------------------------------------------
- * Name: PhyGetRandomNo
- * Description: - This function should be called only when the Radio is idle.
- * The function may take a long time to run!
- * It is recomended to use this function only to initializa a seed at startup!
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-
-void PhyGetRandomNo(uint32_t *pRandomNo)
-{
- uint8_t i = 4, prevRN=0;
- uint8_t* ptr = (uint8_t *)pRandomNo;
- uint32_t startTime, endTime;
- uint8_t phyReg;
-
- MCR20Drv_IRQ_Disable();
-
- if( PhyPpGetState() )
- {
- *pRandomNo = 0;
- MCR20Drv_IRQ_Enable();
- return;
- }
-
- while (i--)
- {
- PhyTimeReadClock(&startTime);
-
- // Program a new sequence
- phyReg = MCR20Drv_DirectAccessSPIRead(PHY_CTRL1);
- MCR20Drv_DirectAccessSPIWrite( PHY_CTRL1, phyReg | gRX_c);
-
- // wait a variable number of symbols */
- do
- PhyTimeReadClock(&endTime);
- while( ((endTime - startTime) & 0x00FFFFFF) < (PHY_MIN_RNG_DELAY + (prevRN>>5)));
-
- // Abort the sequence
- PhyAbort();
-
- // Read new 8 bit random number
- prevRN = MCR20Drv_IndirectAccessSPIRead((uint8_t)_RNG);
- *ptr++ = prevRN;
- }
-
- MCR20Drv_IRQ_Enable();
-}
-
-
-/*---------------------------------------------------------------------------
- * Name: PhyPpSetDualPanAuto
- * Description: -
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-void PhyPpSetDualPanAuto
-(
- bool_t mode
-)
-{
- uint8_t phyReg, phyReg2;
-
- phyReg = MCR20Drv_IndirectAccessSPIRead( (uint8_t) DUAL_PAN_CTRL);
-
- if( mode )
- {
- phyReg2 = phyReg | (cDUAL_PAN_CTRL_DUAL_PAN_AUTO);
- }
- else
- {
- phyReg2 = phyReg & (~cDUAL_PAN_CTRL_DUAL_PAN_AUTO);
- }
-
- /* Write the new value only if it has changed */
- if (phyReg2 != phyReg)
- MCR20Drv_IndirectAccessSPIWrite( (uint8_t) DUAL_PAN_CTRL, phyReg2);
-}
-
-/*---------------------------------------------------------------------------
- * Name: PhyPpGetDualPanAuto
- * Description: -
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-bool_t PhyPpGetDualPanAuto
-(
- void
-)
-{
- uint8_t phyReg = MCR20Drv_IndirectAccessSPIRead(DUAL_PAN_CTRL);
- return (phyReg & cDUAL_PAN_CTRL_DUAL_PAN_AUTO) == cDUAL_PAN_CTRL_DUAL_PAN_AUTO;
-}
-
-/*---------------------------------------------------------------------------
- * Name: PhyPpSetDualPanDwell
- * Description: -
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-void PhyPpSetDualPanDwell // TODO: check seq state and return phyStatus_t
-(
- uint8_t dwell
-)
-{
- MCR20Drv_IndirectAccessSPIWrite( (uint8_t) DUAL_PAN_DWELL, dwell);
-}
-
-/*---------------------------------------------------------------------------
- * Name: PhyPpGetDualPanDwell
- * Description: -
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-uint8_t PhyPpGetDualPanDwell
-(
- void
-)
-{
- return MCR20Drv_IndirectAccessSPIRead( (uint8_t) DUAL_PAN_DWELL);
-}
-
-/*---------------------------------------------------------------------------
- * Name: PhyPpGetDualPanRemain
- * Description: -
- * Parameters: -
- * Return: - the remaining Dwell time
- *---------------------------------------------------------------------------*/
-uint8_t PhyPpGetDualPanRemain()
-{
- return (MCR20Drv_IndirectAccessSPIRead(DUAL_PAN_STS) & cDUAL_PAN_STS_DUAL_PAN_REMAIN);
-}
-
-/*---------------------------------------------------------------------------
- * Name: PhyPpSetDualPanSamLvl
- * Description: -
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-void PhyPpSetDualPanSamLvl // TODO: check seq state and return phyStatus_t
-(
- uint8_t level
-)
-{
- uint8_t phyReg;
-#ifdef PHY_PARAMETERS_VALIDATION
- if( level > gPhyIndirectQueueSize_c )
- return;
-#endif
- phyReg = MCR20Drv_IndirectAccessSPIRead( (uint8_t) DUAL_PAN_CTRL);
-
- phyReg &= ~cDUAL_PAN_CTRL_DUAL_PAN_SAM_LVL_MSK; // clear current lvl
- phyReg |= level << cDUAL_PAN_CTRL_DUAL_PAN_SAM_LVL_Shift_c; // set new lvl
-
- MCR20Drv_IndirectAccessSPIWrite( (uint8_t) DUAL_PAN_CTRL, phyReg);
- mPhyCurrentSamLvl = level;
-}
-
-/*---------------------------------------------------------------------------
- * Name: PhyPpGetDualPanSamLvl
- * Description: -
- * Parameters: -
- * Return:
- *---------------------------------------------------------------------------*/
-uint8_t PhyPpGetDualPanSamLvl()
-{
- return mPhyCurrentSamLvl;
-}
-
-/*---------------------------------------------------------------------------
- * Name: PhyPpSetDualPanActiveNwk
- * Description: - Select Active PAN
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-void PhyPpSetDualPanActiveNwk // TODO: check seq state and return phyStatus_t
-(
- uint8_t nwk
-)
-{
- uint8_t phyReg, phyReg2;
-
- phyReg = MCR20Drv_IndirectAccessSPIRead( (uint8_t) DUAL_PAN_CTRL);
-
- if( 0 == nwk )
- {
- phyReg2 = phyReg & (~cDUAL_PAN_CTRL_ACTIVE_NETWORK);
- }
- else
- {
- phyReg2 = phyReg | cDUAL_PAN_CTRL_ACTIVE_NETWORK;
- }
-
- /* Write the new value only if it has changed */
- if( phyReg2 != phyReg )
- {
- MCR20Drv_IndirectAccessSPIWrite( (uint8_t) DUAL_PAN_CTRL, phyReg2);
- }
-}
-
-/*---------------------------------------------------------------------------
- * Name: PhyPpGetDualPanActiveNwk
- * Description: -
- * Parameters: -
- * Return: - the Active PAN
- *---------------------------------------------------------------------------*/
-uint8_t PhyPpGetDualPanActiveNwk(void)
-{
- uint8_t phyReg;
-
- phyReg = MCR20Drv_IndirectAccessSPIRead( (uint8_t)DUAL_PAN_CTRL );
-
- return (phyReg & cDUAL_PAN_CTRL_CURRENT_NETWORK) > 0;
-}
-
-/*---------------------------------------------------------------------------
- * Name: PhyPpGetDualPanNwkOfRxPacket
- * Description: -
- * Parameters: -
- * Return: - the Active PAN
- *---------------------------------------------------------------------------*/
-uint8_t PhyPpGetPanOfRxPacket(void)
-{
- uint8_t phyReg;
- uint8_t PanBitMask = 0;
-
- phyReg = MCR20Drv_IndirectAccessSPIRead( (uint8_t) DUAL_PAN_STS);
-
- if( phyReg & cDUAL_PAN_STS_RECD_ON_PAN0 )
- PanBitMask |= (1<<0);
-
- if( phyReg & cDUAL_PAN_STS_RECD_ON_PAN1 )
- PanBitMask |= (1<<1);
-
- return PanBitMask;
-}
-
-/*---------------------------------------------------------------------------
- * Name: PhyPpSetPromiscuous
- * Description: -
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-void PhyPpSetPromiscuous
-(
- bool_t mode
-)
-{
- uint8_t rxFrameFltReg, phyCtrl4Reg;
-
- rxFrameFltReg = MCR20Drv_IndirectAccessSPIRead( (uint8_t) RX_FRAME_FILTER);
- phyCtrl4Reg = MCR20Drv_DirectAccessSPIRead( (uint8_t) PHY_CTRL4);
-
- if( mode )
- {
- /* FRM_VER[1:0] = b00. 00: Any FrameVersion accepted (0,1,2 & 3) */
- /* All frame types accepted*/
- phyCtrl4Reg |= cPHY_CTRL4_PROMISCUOUS;
- rxFrameFltReg &= ~(cRX_FRAME_FLT_FRM_VER);
- rxFrameFltReg |= (cRX_FRAME_FLT_ACK_FT | cRX_FRAME_FLT_NS_FT);
- }
- else
- {
- phyCtrl4Reg &= ~cPHY_CTRL4_PROMISCUOUS;
- /* FRM_VER[1:0] = b11. Accept FrameVersion 0 and 1 packets, reject all others */
- /* Beacon, Data and MAC command frame types accepted */
- rxFrameFltReg &= ~(cRX_FRAME_FLT_FRM_VER);
- rxFrameFltReg |= (0x03 << cRX_FRAME_FLT_FRM_VER_Shift_c);
- rxFrameFltReg &= ~(cRX_FRAME_FLT_ACK_FT | cRX_FRAME_FLT_NS_FT);
- }
-
- MCR20Drv_IndirectAccessSPIWrite( (uint8_t) RX_FRAME_FILTER, rxFrameFltReg);
- MCR20Drv_DirectAccessSPIWrite( (uint8_t) PHY_CTRL4, phyCtrl4Reg);
-}
-
-/*---------------------------------------------------------------------------
- * Name: PhySetActivePromiscuous()
- * Description: -
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-void PhySetActivePromiscuous(bool_t state)
-{
- uint8_t phyCtrl4Reg;
- uint8_t phyFrameFilterReg;
-// bool_t currentState;
-
- phyCtrl4Reg = MCR20Drv_DirectAccessSPIRead( (uint8_t) PHY_CTRL4);
- phyFrameFilterReg = MCR20Drv_IndirectAccessSPIRead(RX_FRAME_FILTER);
-
-// currentState = (phyFrameFilterReg & cRX_FRAME_FLT_ACTIVE_PROMISCUOUS) ? TRUE : FALSE;
-//
-// if( state == currentState )
-// return;
-
- /* if Prom is set */
- if( state )
- {
- if( phyCtrl4Reg & cPHY_CTRL4_PROMISCUOUS )
- {
- /* Disable Promiscuous mode */
- phyCtrl4Reg &= ~(cPHY_CTRL4_PROMISCUOUS);
-
- /* Enable Active Promiscuous mode */
- phyFrameFilterReg |= cRX_FRAME_FLT_ACTIVE_PROMISCUOUS;
- }
- }
- else
- {
- if( phyFrameFilterReg & cRX_FRAME_FLT_ACTIVE_PROMISCUOUS )
- {
- /* Disable Active Promiscuous mode */
- phyFrameFilterReg &= ~(cRX_FRAME_FLT_ACTIVE_PROMISCUOUS);
-
- /* Enable Promiscuous mode */
- phyCtrl4Reg |= cPHY_CTRL4_PROMISCUOUS;
- }
- }
-
- MCR20Drv_DirectAccessSPIWrite((uint8_t) PHY_CTRL4, phyCtrl4Reg);
- MCR20Drv_IndirectAccessSPIWrite(RX_FRAME_FILTER, phyFrameFilterReg);
-}
-
-/*---------------------------------------------------------------------------
- * Name: PhyGetActivePromiscuous()
- * Description: - returns the state of ActivePromiscuous feature (Enabled/Disabled)
- * Parameters: -
- * Return: - TRUE/FALSE
- *---------------------------------------------------------------------------*/
-bool_t PhyGetActivePromiscuous( void )
-{
- uint8_t phyReg = MCR20Drv_IndirectAccessSPIRead(RX_FRAME_FILTER);
-
- if( phyReg & cRX_FRAME_FLT_ACTIVE_PROMISCUOUS )
- return TRUE;
-
- return FALSE;
-}
-
-/*---------------------------------------------------------------------------
- * Name: PhyPpSetPanId
- * Description: -
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-phyStatus_t PhyPpSetPanId
-(
- uint8_t *pPanId,
- uint8_t pan
-)
-{
-#ifdef PHY_PARAMETERS_VALIDATION
- if(NULL == pPanId)
- {
- return gPhyInvalidParameter_c;
- }
-#endif // PHY_PARAMETERS_VALIDATION
-
- if( 0 == pan )
- MCR20Drv_IndirectAccessSPIMultiByteWrite((uint8_t) MACPANID0_LSB, pPanId, 2);
- else
- MCR20Drv_IndirectAccessSPIMultiByteWrite((uint8_t) MACPANID1_LSB, pPanId, 2);
-
- return gPhySuccess_c;
-}
-
-
-/*---------------------------------------------------------------------------
- * Name: PhyPpSetShortAddr
- * Description: -
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-phyStatus_t PhyPpSetShortAddr
-(
- uint8_t *pShortAddr,
- uint8_t pan
-)
-{
-
-#ifdef PHY_PARAMETERS_VALIDATION
- if(NULL == pShortAddr)
- {
- return gPhyInvalidParameter_c;
- }
-#endif // PHY_PARAMETERS_VALIDATION
-
- if( pan == 0 )
- {
- MCR20Drv_IndirectAccessSPIMultiByteWrite((uint8_t) MACSHORTADDRS0_LSB, pShortAddr, 2);
- }
- else
- {
- MCR20Drv_IndirectAccessSPIMultiByteWrite((uint8_t) MACSHORTADDRS1_LSB, pShortAddr, 2);
- }
-
- return gPhySuccess_c;
-}
-
-/*---------------------------------------------------------------------------
- * Name: PhyPpSetLongAddr
- * Description: -
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-phyStatus_t PhyPpSetLongAddr
-(
- uint8_t *pLongAddr,
- uint8_t pan
-)
-{
-
-#ifdef PHY_PARAMETERS_VALIDATION
- if(NULL == pLongAddr)
- {
- return gPhyInvalidParameter_c;
- }
-#endif // PHY_PARAMETERS_VALIDATION
-
- if( 0 == pan )
- MCR20Drv_IndirectAccessSPIMultiByteWrite((uint8_t) MACLONGADDRS0_0, pLongAddr, 8);
- else
- MCR20Drv_IndirectAccessSPIMultiByteWrite((uint8_t) MACLONGADDRS1_0, pLongAddr, 8);
-
- return gPhySuccess_c;
-}
-
-
-/*---------------------------------------------------------------------------
- * Name: PhyPpSetMacRole
- * Description: -
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-phyStatus_t PhyPpSetMacRole
-(
- bool_t macRole,
- uint8_t pan
-)
-{
- uint8_t phyReg;
-
- if( 0 == pan )
- {
- phyReg = MCR20Drv_DirectAccessSPIRead( (uint8_t) PHY_CTRL4);
-
- if(gMacRole_PanCoord_c == macRole)
- {
- phyReg |= cPHY_CTRL4_PANCORDNTR0;
- }
- else
- {
- phyReg &= ~cPHY_CTRL4_PANCORDNTR0;
- }
- MCR20Drv_DirectAccessSPIWrite( (uint8_t) PHY_CTRL4, phyReg);
- }
- else
- {
- phyReg = MCR20Drv_IndirectAccessSPIRead( (uint8_t) DUAL_PAN_CTRL);
-
- if(gMacRole_PanCoord_c == macRole)
- {
- phyReg |= cDUAL_PAN_CTRL_PANCORDNTR1;
- }
- else
- {
- phyReg &= ~cDUAL_PAN_CTRL_PANCORDNTR1;
- }
- MCR20Drv_IndirectAccessSPIWrite( (uint8_t) DUAL_PAN_CTRL, phyReg);
- }
-
- return gPhySuccess_c;
-}
-
-/*---------------------------------------------------------------------------
- * Name: PhyPpIsTxAckDataPending
- * Description: -
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-bool_t PhyPpIsTxAckDataPending
-(
-void
-)
-{
- uint8_t srcCtrlReg;
-
- srcCtrlReg = MCR20Drv_DirectAccessSPIRead(SRC_CTRL);
- if( srcCtrlReg & cSRC_CTRL_SRCADDR_EN )
- {
- uint8_t irqsts2Reg;
-
- irqsts2Reg = MCR20Drv_DirectAccessSPIRead((uint8_t) IRQSTS2);
-
- if(irqsts2Reg & cIRQSTS2_SRCADDR)
- return TRUE;
- else
- return FALSE;
- }
- else
- {
- return ((srcCtrlReg & cSRC_CTRL_ACK_FRM_PND) == cSRC_CTRL_ACK_FRM_PND);
- }
-}
-
-/*---------------------------------------------------------------------------
- * Name: PhyPpIsRxAckDataPending
- * Description: -
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-bool_t PhyPpIsRxAckDataPending
-(
- void
-)
-{
- uint8_t irqsts1Reg;
- irqsts1Reg = MCR20Drv_DirectAccessSPIRead((uint8_t) IRQSTS1);
- if(irqsts1Reg & cIRQSTS1_RX_FRM_PEND)
- {
- return TRUE;
- }
- return FALSE;
-}
-
-/*---------------------------------------------------------------------------
- * Name: PhyPpSetFpManually
- * Description: -
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-void PhyPpSetFpManually
-(
- bool_t FP
-)
-{
- uint8_t phyReg;
- /* Disable the Source Address Matching feature and set FP manually */
- phyReg = MCR20Drv_DirectAccessSPIRead(SRC_CTRL);
- phyReg &= ~(cSRC_CTRL_SRCADDR_EN);
- if(FP)
- phyReg |= cSRC_CTRL_ACK_FRM_PND;
- else
- phyReg &= ~(cSRC_CTRL_ACK_FRM_PND);
- MCR20Drv_DirectAccessSPIWrite(SRC_CTRL, phyReg);
-}
-
-/*---------------------------------------------------------------------------
- * Name: PhyPpIsPollIndication
- * Description: -
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-bool_t PhyPpIsPollIndication
-(
- void
-)
-{
- uint8_t irqsts2Reg;
- irqsts2Reg = MCR20Drv_DirectAccessSPIRead((uint8_t) IRQSTS2);
- if(irqsts2Reg & cIRQSTS2_PI)
- {
- return TRUE;
- }
- return FALSE;
-}
-
-/*---------------------------------------------------------------------------
- * Name: PhyPpSetCcaThreshold
- * Description: -
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-phyStatus_t PhyPpSetCcaThreshold(uint8_t ccaThreshold)
-{
- MCR20Drv_IndirectAccessSPIWrite((uint8_t) CCA1_THRESH, (uint8_t) ccaThreshold);
- return gPhySuccess_c;
-}
-
-/*---------------------------------------------------------------------------
- * Name: PhyPpSetSAMState
- * Description: -
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-void PhyPpSetSAMState
-(
- bool_t state
-)
-{
- uint8_t phyReg, newPhyReg;
- /* Disable/Enables the Source Address Matching feature */
- phyReg = MCR20Drv_DirectAccessSPIRead(SRC_CTRL);
- if( state )
- newPhyReg = phyReg | cSRC_CTRL_SRCADDR_EN;
- else
- newPhyReg = phyReg & ~(cSRC_CTRL_SRCADDR_EN);
-
- if( newPhyReg != phyReg )
- MCR20Drv_DirectAccessSPIWrite(SRC_CTRL, newPhyReg);
-}
-
-
-/*---------------------------------------------------------------------------
- * Name: PhyPlmeSetFADStateRequest
- * Description: -
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-uint8_t PhyPlmeSetFADStateRequest(bool_t state)
-{
- uint8_t phyReg;
-
- phyReg = MCR20Drv_IndirectAccessSPIRead(ANT_AGC_CTRL);
- state ? (phyReg |= cANT_AGC_CTRL_FAD_EN_Mask_c) : (phyReg &= (~((uint8_t)cANT_AGC_CTRL_FAD_EN_Mask_c)));
- MCR20Drv_IndirectAccessSPIWrite(ANT_AGC_CTRL, phyReg);
-
- phyReg = MCR20Drv_IndirectAccessSPIRead(ANT_PAD_CTRL);
- state ? (phyReg |= 0x02) : (phyReg &= ~cANT_PAD_CTRL_ANTX_EN);
- MCR20Drv_IndirectAccessSPIWrite(ANT_PAD_CTRL, phyReg);
-
- return gPhySuccess_c;
-}
-
-/*---------------------------------------------------------------------------
- * Name: PhyPlmeSetFADThresholdRequest
- * Description: -
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-uint8_t PhyPlmeSetFADThresholdRequest(uint8_t FADThreshold)
-{
- MCR20Drv_IndirectAccessSPIWrite(FAD_THR, FADThreshold);
- return gPhySuccess_c;
-}
-
-uint8_t PhyPlmeSetANTPadStateRequest(bool_t antAB_on, bool_t rxtxSwitch_on)
-{
- uint8_t phyReg;
-
- phyReg = MCR20Drv_IndirectAccessSPIRead(ANT_PAD_CTRL);
- antAB_on ? (phyReg |= 0x02) : (phyReg &= ~0x02);
- rxtxSwitch_on ? (phyReg |= 0x01) : (phyReg &= ~0x01);
- MCR20Drv_IndirectAccessSPIWrite(ANT_PAD_CTRL, phyReg);
-
- return gPhySuccess_c;
-}
-
-uint8_t PhyPlmeSetANTPadStrengthRequest(bool_t hiStrength)
-{
- uint8_t phyReg;
-
- phyReg = MCR20Drv_IndirectAccessSPIRead(MISC_PAD_CTRL);
- hiStrength ? (phyReg |= cMISC_PAD_CTRL_ANTX_CURR) : (phyReg &= ~cMISC_PAD_CTRL_ANTX_CURR);
- MCR20Drv_IndirectAccessSPIWrite(MISC_PAD_CTRL, phyReg);
-
- return gPhySuccess_c;
-}
-
-uint8_t PhyPlmeSetANTPadInvertedRequest(bool_t invAntA, bool_t invAntB, bool_t invTx, bool_t invRx)
-{
- uint8_t phyReg;
-
- phyReg = MCR20Drv_IndirectAccessSPIRead(MISC_PAD_CTRL);
- invAntA ? (phyReg |= 0x10) : (phyReg &= ~0x10);
- invAntB ? (phyReg |= 0x20) : (phyReg &= ~0x20);
- invTx ? (phyReg |= 0x40) : (phyReg &= ~0x40);
- invRx ? (phyReg |= 0x80) : (phyReg &= ~0x80);
- MCR20Drv_IndirectAccessSPIWrite(MISC_PAD_CTRL, phyReg);
-
- return gPhySuccess_c;
-}
-
-/*---------------------------------------------------------------------------
- * Name: PhyPlmeSetANTXStateRequest
- * Description: -
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-uint8_t PhyPlmeSetANTXStateRequest(bool_t state)
-{
- uint8_t phyReg;
-
- phyReg = MCR20Drv_IndirectAccessSPIRead(ANT_AGC_CTRL);
- state ? (phyReg |= cANT_AGC_CTRL_ANTX_Mask_c) : (phyReg &= (~((uint8_t)cANT_AGC_CTRL_ANTX_Mask_c)));
- MCR20Drv_IndirectAccessSPIWrite(ANT_AGC_CTRL, phyReg);
-
- return gPhySuccess_c;
-}
-
-/*---------------------------------------------------------------------------
- * Name: PhyPlmeGetANTXStateRequest
- * Description: -
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-uint8_t PhyPlmeGetANTXStateRequest(void)
-{
- uint8_t phyReg;
-
- phyReg = MCR20Drv_IndirectAccessSPIRead(ANT_AGC_CTRL);
-
- return ((phyReg & cANT_AGC_CTRL_ANTX_Mask_c) == cANT_AGC_CTRL_ANTX_Mask_c);
-}
-
-/*---------------------------------------------------------------------------
- * Name: PhyPp_IndirectQueueInsert
- * Description: -
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-phyStatus_t PhyPp_IndirectQueueInsert // TODO: to validate add to indirect queue parameters
-(
- uint8_t index,
- uint16_t checkSum,
- instanceId_t instanceId
-)
-{
- uint16_t srcAddressCheckSum = checkSum;
- uint8_t srcCtrlReg;
-
- if( index >= gPhyIndirectQueueSize_c )
- return gPhyInvalidParameter_c;
-
- srcCtrlReg = (uint8_t) ( (index & cSRC_CTRL_INDEX) << cSRC_CTRL_INDEX_Shift_c );
- MCR20Drv_DirectAccessSPIWrite( (uint8_t) SRC_CTRL, srcCtrlReg);
-
- MCR20Drv_DirectAccessSPIMultiByteWrite( (uint8_t) SRC_ADDRS_SUM_LSB, (uint8_t *) &srcAddressCheckSum, 2);
-
- srcCtrlReg |= ( cSRC_CTRL_SRCADDR_EN | cSRC_CTRL_INDEX_EN );
- MCR20Drv_DirectAccessSPIWrite( (uint8_t) SRC_CTRL, srcCtrlReg);
-
- return gPhySuccess_c;
-
-}
-
-
-/*---------------------------------------------------------------------------
- * Name: PhyPp_RemoveFromIndirect
- * Description: -
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-phyStatus_t PhyPp_RemoveFromIndirect
-(
- uint8_t index,
- instanceId_t instanceId
-)
-{
- uint8_t srcCtrlReg;
-
- if( index >= gPhyIndirectQueueSize_c )
- return gPhyInvalidParameter_c;
-
- srcCtrlReg = (uint8_t)( ( (index & cSRC_CTRL_INDEX) << cSRC_CTRL_INDEX_Shift_c )
- |( cSRC_CTRL_SRCADDR_EN )
- |( cSRC_CTRL_INDEX_DISABLE) );
-
- MCR20Drv_DirectAccessSPIWrite( (uint8_t) SRC_CTRL, srcCtrlReg);
-
- return gPhySuccess_c;
-}
-
-
-/*---------------------------------------------------------------------------
- * Name: PhyPpGetState
- * Description: -
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-uint8_t PhyPpGetState
-(
- void
-)
-{
- return (uint8_t)( MCR20Drv_DirectAccessSPIRead( (uint8_t) PHY_CTRL1) & cPHY_CTRL1_XCVSEQ );
-}
-
-/*! *********************************************************************************
-* \brief Aborts the current sequence and force the radio to IDLE
-*
-********************************************************************************** */
-void PhyAbort(void)
-{
- uint8_t phyRegs[8];
- volatile uint8_t currentTime = 0;
-
- ProtectFromMCR20Interrupt();
-
- phyRegs[0] = MCR20Drv_DirectAccessSPIMultiByteRead(IRQSTS2, &phyRegs[1], 7);
-
- // Disable timer trigger (for scheduled XCVSEQ)
- if( phyRegs[PHY_CTRL1] & cPHY_CTRL1_TMRTRIGEN )
- {
- phyRegs[PHY_CTRL1] &= (uint8_t) ~(cPHY_CTRL1_TMRTRIGEN );
- MCR20Drv_DirectAccessSPIWrite(PHY_CTRL1, phyRegs[PHY_CTRL1]);
-
- // give the FSM enough time to start if it was triggered
- currentTime = (uint8_t) ( MCR20Drv_DirectAccessSPIRead(EVENT_TMR_LSB) + 2 );
- while(MCR20Drv_DirectAccessSPIRead(EVENT_TMR_LSB) != (uint8_t) (currentTime));
-
- phyRegs[PHY_CTRL1] = MCR20Drv_DirectAccessSPIRead(PHY_CTRL1);
- }
-
- if( (phyRegs[PHY_CTRL1] & cPHY_CTRL1_XCVSEQ) != gIdle_c )
- {
- // Abort current SEQ
- phyRegs[PHY_CTRL1] &= (uint8_t) ~(cPHY_CTRL1_XCVSEQ);
- MCR20Drv_DirectAccessSPIWrite(PHY_CTRL1, phyRegs[PHY_CTRL1]);
-
- // wait for Sequence Idle (if not already)
- while ((MCR20Drv_DirectAccessSPIRead(SEQ_STATE) & 0x1F) != 0);
- }
-
- // mask SEQ interrupt
- phyRegs[PHY_CTRL2] |= (uint8_t) (cPHY_CTRL2_SEQMSK);
- // stop timers
- phyRegs[PHY_CTRL3] &= (uint8_t) ~(cPHY_CTRL3_TMR2CMP_EN | cPHY_CTRL3_TMR3CMP_EN);
- phyRegs[PHY_CTRL4] &= (uint8_t) ~(cPHY_CTRL4_TC3TMOUT);
-
- MCR20Drv_DirectAccessSPIMultiByteWrite(PHY_CTRL2, &phyRegs[PHY_CTRL2], 4);
-
- // clear all PP IRQ bits to avoid unexpected interrupts
- phyRegs[IRQSTS3] &= 0xF0; // do not change IRQ status
- phyRegs[IRQSTS3] |= (uint8_t) (cIRQSTS3_TMR3MSK |
- cIRQSTS3_TMR2IRQ |
- cIRQSTS3_TMR3IRQ); // mask TMR3 interrupt
-
- MCR20Drv_DirectAccessSPIMultiByteWrite(IRQSTS1, phyRegs, 3);
-
- PhyIsrPassRxParams(NULL);
-
- UnprotectFromMCR20Interrupt();
-}
-
-
-/*! *********************************************************************************
-* \brief Initialize the 802.15.4 Radio registers
-*
-********************************************************************************** */
-
-void PhyHwInit( void )
-{
- uint8_t index;
- uint8_t phyReg;
-
- /* Initialize the transceiver SPI driver */
- MCR20Drv_Init();
- /* Configure the transceiver IRQ_B port */
- MCR20Drv_IRQ_PortConfig();
- /* Initialize the SPI driver and install PHY ISR */
- PHY_InstallIsr();
-
- //Disable Tristate on COCO MISO for SPI reads
- MCR20Drv_IndirectAccessSPIWrite((uint8_t) MISC_PAD_CTRL, (uint8_t) 0x02);
-
- // PHY_CTRL4 unmask global TRX interrupts, enable 16 bit mode for TC2 - TC2 prime EN
- MCR20Drv_DirectAccessSPIWrite(PHY_CTRL4, (uint8_t) (cPHY_CTRL4_TC2PRIME_EN | \
- (gCcaCCA_MODE1_c << cPHY_CTRL4_CCATYPE_Shift_c)));
-
- // clear all PP IRQ bits to avoid unexpected interrupts immediately after init, disable all timer interrupts
- MCR20Drv_DirectAccessSPIWrite(IRQSTS1, (uint8_t) (cIRQSTS1_PLL_UNLOCK_IRQ | \
- cIRQSTS1_FILTERFAIL_IRQ | \
- cIRQSTS1_RXWTRMRKIRQ | \
- cIRQSTS1_CCAIRQ | \
- cIRQSTS1_RXIRQ | \
- cIRQSTS1_TXIRQ | \
- cIRQSTS1_SEQIRQ));
-
- MCR20Drv_DirectAccessSPIWrite(IRQSTS2, (uint8_t) (cIRQSTS2_ASM_IRQ | \
- cIRQSTS2_PB_ERR_IRQ | \
- cIRQSTS2_WAKE_IRQ));
-
- MCR20Drv_DirectAccessSPIWrite(IRQSTS3, (uint8_t) (cIRQSTS3_TMR4MSK | \
- cIRQSTS3_TMR3MSK | \
- cIRQSTS3_TMR2MSK | \
- cIRQSTS3_TMR1MSK | \
- cIRQSTS3_TMR4IRQ | \
- cIRQSTS3_TMR3IRQ | \
- cIRQSTS3_TMR2IRQ | \
- cIRQSTS3_TMR1IRQ));
-
- // PHY_CTRL1 default HW settings + AUTOACK enabled
- MCR20Drv_DirectAccessSPIWrite(PHY_CTRL1, (uint8_t) (cPHY_CTRL1_AUTOACK));
-
- // PHY_CTRL2 : disable all interrupts
- MCR20Drv_DirectAccessSPIWrite(PHY_CTRL2, (uint8_t) (cPHY_CTRL2_CRC_MSK | \
- cPHY_CTRL2_PLL_UNLOCK_MSK | \
- cPHY_CTRL2_FILTERFAIL_MSK | \
- cPHY_CTRL2_RX_WMRK_MSK | \
- cPHY_CTRL2_CCAMSK | \
- cPHY_CTRL2_RXMSK | \
- cPHY_CTRL2_TXMSK | \
- cPHY_CTRL2_SEQMSK));
-
- // PHY_CTRL3 : disable all timers and remaining interrupts
- MCR20Drv_DirectAccessSPIWrite(PHY_CTRL3, (uint8_t) (cPHY_CTRL3_ASM_MSK | \
- cPHY_CTRL3_PB_ERR_MSK | \
- cPHY_CTRL3_WAKE_MSK));
- // SRC_CTRL
- MCR20Drv_DirectAccessSPIWrite(SRC_CTRL, (uint8_t) (cSRC_CTRL_ACK_FRM_PND | \
- (cSRC_CTRL_INDEX << cSRC_CTRL_INDEX_Shift_c)));
- // RX_FRAME_FILTER
- // FRM_VER[1:0] = b11. Accept FrameVersion 0 and 1 packets, reject all others
- MCR20Drv_IndirectAccessSPIWrite(RX_FRAME_FILTER, (uint8_t)(cRX_FRAME_FLT_FRM_VER | \
- cRX_FRAME_FLT_BEACON_FT | \
- cRX_FRAME_FLT_DATA_FT | \
- cRX_FRAME_FLT_CMD_FT ));
- // Direct register overwrites
- for (index = 0; index < sizeof(overwrites_direct)/sizeof(overwrites_t); index++)
- MCR20Drv_DirectAccessSPIWrite(overwrites_direct[index].address, overwrites_direct[index].data);
-
- // Indirect register overwrites
- for (index = 0; index < sizeof(overwrites_indirect)/sizeof(overwrites_t); index++)
- MCR20Drv_IndirectAccessSPIWrite(overwrites_indirect[index].address, overwrites_indirect[index].data);
-
- // Clear HW indirect queue
- for( index = 0; index < gPhyIndirectQueueSize_c; index++ )
- PhyPp_RemoveFromIndirect( index, 0 );
-
- PhyPlmeSetCurrentChannelRequest(0x0B, 0); //2405 MHz
-#if gMpmIncluded_d
- PhyPlmeSetCurrentChannelRequest(0x0B, 1); //2405 MHz
-
- // Split the HW Indirect hash table in two
- PhyPpSetDualPanSamLvl( gPhyIndirectQueueSize_c/2 );
-#else
- // Assign HW Indirect hash table to PAN0
- PhyPpSetDualPanSamLvl( gPhyIndirectQueueSize_c );
-#endif
-
- // set the power level to 0dBm
- PhyPlmeSetPwrLevelRequest(0x17);
- // set CCA threshold to -75 dBm
- PhyPpSetCcaThreshold(0x4B);
- // Set prescaller to obtain 1 symbol (16us) timebase
- MCR20Drv_IndirectAccessSPIWrite(TMR_PRESCALE, 0x05);
- // write default Rx watermark level
- MCR20Drv_IndirectAccessSPIWrite(RX_WTR_MARK, 0);
-
- //Enable the RxWatermark IRQ and FilterFail IRQ
- phyReg = MCR20Drv_DirectAccessSPIRead(PHY_CTRL2);
- //phyReg &= (uint8_t)~(cPHY_CTRL2_FILTERFAIL_MSK);
- phyReg &= (uint8_t)~(cPHY_CTRL2_RX_WMRK_MSK);
- MCR20Drv_DirectAccessSPIWrite(PHY_CTRL2, phyReg);
-
- /* enable autodoze mode. */
- phyReg = MCR20Drv_DirectAccessSPIRead( (uint8_t) PWR_MODES);
- phyReg |= (uint8_t) cPWR_MODES_AUTODOZE;
- MCR20Drv_DirectAccessSPIWrite( (uint8_t) PWR_MODES, phyReg);
- MCR20Drv_Set_CLK_OUT_Freq(gMCR20_ClkOutFreq_d);
-
- // Clear IRQn Pending Status
- MCR20Drv_IRQ_Clear();
- //NVIC_ClearPendingIRQ(g_portIrqId[GPIO_EXTRACT_PORT(kGpioXcvrIrqPin)]);
- /* enable the transceiver IRQ_B interrupt request */
- MCR20Drv_IRQ_Enable();
-}
-
-/*! *********************************************************************************
-* \brief Change the XCVR power state
-*
-* \param[in] state the new XCVR power state
-*
-* \return phyStatus_t
-*
-* \pre Before entering hibernate/reset states, the MCG clock source must be changed
-* to use an input other than the one generated by the XCVR!
-*
-* \post When XCVR is in hibernate, indirect registers cannot be accessed in burst mode
-* When XCVR is in reset, all registers are inaccessible!
-*
-* \remarks Putting the XCVR into hibernate/reset will stop the generated clock signal!
-*
-********************************************************************************** */
-phyStatus_t PhyPlmeSetPwrState( uint8_t state )
-{
- uint8_t phyPWR, xtalState;
-
- /* Parameter validation */
- if( state > gPhyPwrReset_c )
- return gPhyInvalidParameter_c;
-
- /* Check if the new power state = old power state */
- if( state == mPhyPwrState )
- return gPhyBusy_c;
-
- /* Check if the XCVR is in reset power mode */
- if( mPhyPwrState == gPhyPwrReset_c )
- {
- MCR20Drv_RST_B_Deassert();
- /* Wait for transceiver to deassert IRQ pin */
- while( MCR20Drv_IsIrqPending() );
- /* Wait for transceiver wakeup from POR iterrupt */
- while( !MCR20Drv_IsIrqPending() );
- /* After reset, the radio is in Idle state */
- mPhyPwrState = gPhyPwrIdle_c;
- /* Restore default radio settings */
- PhyHwInit();
- }
-
- if( state != gPhyPwrReset_c )
- {
- phyPWR = MCR20Drv_DirectAccessSPIRead( PWR_MODES );
- xtalState = phyPWR & cPWR_MODES_XTALEN;
- }
-
- switch( state )
- {
- case gPhyPwrIdle_c:
- phyPWR &= ~(cPWR_MODES_AUTODOZE);
- phyPWR |= (cPWR_MODES_XTALEN | cPWR_MODES_PMC_MODE);
- break;
-
- case gPhyPwrAutodoze_c:
- phyPWR |= (cPWR_MODES_XTALEN | cPWR_MODES_AUTODOZE | cPWR_MODES_PMC_MODE);
- break;
-
- case gPhyPwrDoze_c:
- phyPWR &= ~(cPWR_MODES_AUTODOZE | cPWR_MODES_PMC_MODE);
- phyPWR |= cPWR_MODES_XTALEN;
- break;
-
- case gPhyPwrHibernate_c:
- phyPWR &= ~(cPWR_MODES_XTALEN | cPWR_MODES_AUTODOZE | cPWR_MODES_PMC_MODE);
- break;
-
- case gPhyPwrReset_c:
- MCR20Drv_IRQ_Disable();
- mPhyPwrState = gPhyPwrReset_c;
- MCR20Drv_RST_B_Assert();
- return gPhySuccess_c;
- }
-
- mPhyPwrState = state;
- MCR20Drv_DirectAccessSPIWrite( PWR_MODES, phyPWR );
-
- if( !xtalState && (phyPWR & cPWR_MODES_XTALEN))
- {
- /* wait for crystal oscillator to complet its warmup */
- while( ( MCR20Drv_DirectAccessSPIRead(PWR_MODES) & cPWR_MODES_XTAL_READY ) != cPWR_MODES_XTAL_READY);
- /* wait for radio wakeup from hibernate interrupt */
- while( ( MCR20Drv_DirectAccessSPIRead(IRQSTS2) & (cIRQSTS2_WAKE_IRQ | cIRQSTS2_TMRSTATUS) ) != (cIRQSTS2_WAKE_IRQ | cIRQSTS2_TMRSTATUS) );
-
- MCR20Drv_DirectAccessSPIWrite(IRQSTS2, cIRQSTS2_WAKE_IRQ);
- }
-
- return gPhySuccess_c;
-}
--- a/FSL_IEEE_802_15_4/PHY/PhyPlmeData.c Fri Jul 31 13:49:46 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,687 +0,0 @@
-/*!
-* Copyright (c) 2015, Freescale Semiconductor, Inc.
-* All rights reserved.
-*
-* \file PhyPlmeData.c
-*
-* Redistribution and use in source and binary forms, with or without modification,
-* are permitted provided that the following conditions are met:
-*
-* o Redistributions of source code must retain the above copyright notice, this list
-* of conditions and the following disclaimer.
-*
-* o Redistributions in binary form must reproduce the above copyright notice, this
-* list of conditions and the following disclaimer in the documentation and/or
-* other materials provided with the distribution.
-*
-* o Neither the name of Freescale Semiconductor, Inc. nor the names of its
-* contributors may be used to endorse or promote products derived from this
-* software without specific prior written permission.
-*
-* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
-* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
-* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-*/
-
-
-/************************************************************************************
-*************************************************************************************
-* Include
-*************************************************************************************
-************************************************************************************/
-
-#include "EmbeddedTypes.h"
-
-//#include "fsl_os_abstraction.h"
-#include "MCR20Drv.h"
-#include "MCR20Reg.h"
-#include "Phy.h"
-#include "PhyTypes.h"
-#include "PhyInterface.h"
-#include "MemManager.h"
-#include "FunctionLib.h"
-
-
-
-/************************************************************************************
-*************************************************************************************
-* Private macros
-*************************************************************************************
-************************************************************************************/
-#define PHY_PARAMETERS_VALIDATION 1
-
-/************************************************************************************
-*************************************************************************************
-* Private memory declarations
-*************************************************************************************
-************************************************************************************/
- //2405 2410 2415 2420 2425 2430 2435 2440 2445 2450 2455 2460 2465 2470 2475 2480
-static const uint8_t pll_int[16] = {0x0B, 0x0B, 0x0B, 0x0B, 0x0B, 0x0B, 0x0C, 0x0C, 0x0C, 0x0C, 0x0C, 0x0C, 0x0D, 0x0D, 0x0D, 0x0D};
-static const uint16_t pll_frac[16] = {0x2800, 0x5000, 0x7800, 0xA000, 0xC800, 0xF000, 0x1800, 0x4000, 0x6800, 0x9000, 0xB800, 0xE000, 0x0800, 0x3000, 0x5800, 0x8000};
-
-extern Phy_PhyLocalStruct_t phyLocal[];
-static uint8_t gPhyCurrentChannelPAN0 = 0x0B;
-static uint8_t gPhyCurrentChannelPAN1 = 0x0B;
-
-
-/************************************************************************************
-*************************************************************************************
-* Private prototypes
-*************************************************************************************
-************************************************************************************/
-static void PhyRxRetry( uint32_t param );
-
-
-/************************************************************************************
-*************************************************************************************
-* Public functions
-*************************************************************************************
-************************************************************************************/
-
-/*! *********************************************************************************
-* \brief This function will start a TX sequence. The packet will be sent OTA
-*
-* \param[in] pTxPacket pointer to the TX packet structure
-* \param[in] pRxParams pointer to RX parameters
-* \param[in] pTxParams pointer to TX parameters
-*
-* \return phyStatus_t
-*
-********************************************************************************** */
-phyStatus_t PhyPdDataRequest( pdDataReq_t *pTxPacket,
- volatile phyRxParams_t *pRxParams,
- volatile phyTxParams_t *pTxParams )
-{
- uint8_t phyRegs[5], phyCtrl4Reg;
- uint8_t *pTmpPsdu; //*tmp;
-
-#ifdef PHY_PARAMETERS_VALIDATION
- // null pointer
- if(NULL == pTxPacket)
- {
- return gPhyInvalidParameter_c;
- }
-
- // if CCA required ...
- if( (pTxPacket->CCABeforeTx == gPhyCCAMode3_c) || (pTxPacket->CCABeforeTx == gPhyEnergyDetectMode_c))
- { // ... cannot perform other types than MODE1 and MODE2
- return gPhyInvalidParameter_c;
- }
-
-#endif // PHY_PARAMETERS_VALIDATION
-
- if( gIdle_c != PhyPpGetState() )
- {
- return gPhyBusy_c;
- }
-
- // load data into PB
- pTmpPsdu = MEM_BufferAlloc(gMaxPHYPacketSize_c + 1);
- *pTmpPsdu = pTxPacket->psduLength + 2;
- FLib_MemCpy(pTmpPsdu+1, &pTxPacket->pPsdu[0], pTxPacket->psduLength);
- MCR20Drv_PB_SPIBurstWrite(pTmpPsdu, (uint8_t) (pTxPacket->psduLength + 1)); /* including psduLength */
- MEM_BufferFree(pTmpPsdu);
-
-
-#if 0
- // load data into PB
- tmp = pTxPacket->pPsdu;
-
- pTmpPsdu = (uint8_t *) ((&pTxPacket->pPsdu[0])-1);
- *pTmpPsdu = pTxPacket->psduLength + 2; /* including 2 bytes of FCS */
- MCR20Drv_PB_SPIBurstWrite( pTmpPsdu, (uint8_t) (pTxPacket->psduLength + 1)); /* including psduLength */
-
- pTxPacket->pPsdu = tmp;
-#endif
-
- phyCtrl4Reg = MCR20Drv_DirectAccessSPIRead(PHY_CTRL4);
- phyRegs[0] = MCR20Drv_DirectAccessSPIMultiByteRead(IRQSTS2, &phyRegs[1], 4);
-
- // perform CCA before TX if required
- phyRegs[PHY_CTRL1] &= (uint8_t) ~(cPHY_CTRL1_CCABFRTX);
- phyCtrl4Reg &= (uint8_t) ~(cPHY_CTRL4_CCATYPE << cPHY_CTRL4_CCATYPE_Shift_c);
-
- if( pTxPacket->CCABeforeTx != gPhyNoCCABeforeTx_c )
- {
-#if (gUseStandaloneCCABeforeTx_d == 0)
- phyRegs[PHY_CTRL1] |= (uint8_t) (cPHY_CTRL1_CCABFRTX);
-#endif
- phyCtrl4Reg |= (uint8_t) ((cPHY_CTRL4_CCATYPE & pTxPacket->CCABeforeTx) << (cPHY_CTRL4_CCATYPE_Shift_c));
- }
-
- // slotted operation
- if( pTxPacket->slottedTx == gPhySlottedMode_c )
- {
- phyRegs[PHY_CTRL1] |= (uint8_t) (cPHY_CTRL1_SLOTTED);
- }
- else
- {
- phyRegs[PHY_CTRL1] &= (uint8_t) ~(cPHY_CTRL1_SLOTTED);
- }
-
- // perform TxRxAck sequence if required by phyTxMode
- if(pTxPacket->ackRequired == gPhyRxAckRqd_c)
- {
- PhyIsrPassRxParams(pRxParams);
-
- phyRegs[PHY_CTRL1] |= (uint8_t) (cPHY_CTRL1_RXACKRQD);
- phyRegs[PHY_CTRL1] &= (uint8_t) ~(cPHY_CTRL1_XCVSEQ);
- phyRegs[PHY_CTRL1] |= gTR_c;
- }
- else
- {
- PhyIsrPassRxParams(NULL);
-
- phyRegs[PHY_CTRL1] &= (uint8_t) ~(cPHY_CTRL1_RXACKRQD);
- phyRegs[PHY_CTRL1] &= (uint8_t) ~(cPHY_CTRL1_XCVSEQ);
- phyRegs[PHY_CTRL1] |= gTX_c;
- }
-
-#if gUseStandaloneCCABeforeTx_d
- if( pTxPacket->CCABeforeTx != gPhyNoCCABeforeTx_c )
- {
- // start the CCA or ED sequence (this depends on CcaType used)
- // immediately or by TC2', depending on a previous PhyTimeSetEventTrigger() call)
- if( pTxPacket->slottedTx == gPhySlottedMode_c )
- pTxParams->numOfCca = 2;
- else
- pTxParams->numOfCca = 1;
- pTxParams->ackRequired = pTxPacket->ackRequired;
- phyRegs[PHY_CTRL1] &= (uint8_t) ~(cPHY_CTRL1_XCVSEQ);
- phyRegs[PHY_CTRL1] |= gCCA_c;
- // at the end of the scheduled sequence, an interrupt will occur:
- // CCA , SEQ or TMR3
- }
- else
- {
- pTxParams->numOfCca = 0;
- }
-#endif
-
- phyRegs[PHY_CTRL2] &= (uint8_t) ~(cPHY_CTRL2_SEQMSK); // unmask SEQ interrupt
-
- // ensure that no spurious interrupts are raised
- phyRegs[IRQSTS3] &= 0xF0; // do not change IRQ status
- phyRegs[IRQSTS3] |= (uint8_t) (cIRQSTS3_TMR3MSK |
- cIRQSTS3_TMR2IRQ |
- cIRQSTS3_TMR3IRQ); // mask TMR3 interrupt
-
- MCR20Drv_DirectAccessSPIMultiByteWrite(IRQSTS1, phyRegs, 3);
- MCR20Drv_DirectAccessSPIWrite( (uint8_t) PHY_CTRL2, phyRegs[PHY_CTRL2]);
- MCR20Drv_DirectAccessSPIWrite( (uint8_t) PHY_CTRL4, phyCtrl4Reg);
-
- // start the TX or TRX sequence
- MCR20Drv_DirectAccessSPIWrite( (uint8_t) PHY_CTRL1, phyRegs[PHY_CTRL1]);
-
- return gPhySuccess_c;
-}
-
-/*! *********************************************************************************
-* \brief This function will start a RX sequence
-*
-* \param[in] phyRxMode slotted/unslotted
-* \param[in] pRxParams pointer to RX parameters
-*
-* \return phyStatus_t
-*
-********************************************************************************** */
-phyStatus_t PhyPlmeRxRequest( phySlottedMode_t phyRxMode, phyRxParams_t * pRxParams )
-{
- uint8_t phyRegs[5];
-
-#ifdef PHY_PARAMETERS_VALIDATION
- if(NULL == pRxParams)
- {
- return gPhyInvalidParameter_c;
- }
-#endif // PHY_PARAMETERS_VALIDATION
-
- if( gIdle_c != PhyPpGetState() )
- {
- return gPhyBusy_c;
- }
-
- pRxParams->phyRxMode = phyRxMode;
-
- if( NULL == pRxParams->pRxData )
- {
- pRxParams->pRxData = MEM_BufferAlloc(sizeof(pdDataToMacMessage_t) + gMaxPHYPacketSize_c);
- }
-
- if( NULL == pRxParams->pRxData )
- {
- phyTimeEvent_t event = {
- .timestamp = PhyTime_GetTimestamp() + gPhyRxRetryInterval_c,
- .parameter = (uint32_t)pRxParams,
- .callback = PhyRxRetry,
- };
-
- PhyTime_ScheduleEvent( &event );
- return gPhyTRxOff_c;
- }
-
- PhyIsrPassRxParams(pRxParams);
-
- pRxParams->pRxData->msgData.dataInd.pPsdu =
- (uint8_t*)&pRxParams->pRxData->msgData.dataInd.pPsdu +
- sizeof(pRxParams->pRxData->msgData.dataInd.pPsdu);
-
- phyRegs[0] = MCR20Drv_DirectAccessSPIMultiByteRead(IRQSTS2, &phyRegs[1], 4);
-
- // slotted operation
- if(gPhySlottedMode_c == phyRxMode)
- {
- phyRegs[PHY_CTRL1] |= (uint8_t) (cPHY_CTRL1_SLOTTED);
- }
- else
- {
- phyRegs[PHY_CTRL1] &= (uint8_t) ~(cPHY_CTRL1_SLOTTED);
- }
-
- // program the RX sequence
- phyRegs[PHY_CTRL1] &= (uint8_t) ~(cPHY_CTRL1_XCVSEQ);
- phyRegs[PHY_CTRL1] |= gRX_c;
-
- phyRegs[PHY_CTRL2] &= (uint8_t) ~(cPHY_CTRL2_SEQMSK); // unmask SEQ interrupt
-
- // ensure that no spurious interrupts are raised
- phyRegs[IRQSTS3] &= 0xF0; // do not change IRQ status
- phyRegs[IRQSTS3] |= (uint8_t) (cIRQSTS3_TMR3MSK |
- cIRQSTS3_TMR2IRQ |
- cIRQSTS3_TMR3IRQ); // mask TMR3 interrupt
-
- MCR20Drv_DirectAccessSPIMultiByteWrite(IRQSTS1, phyRegs, 3);
- MCR20Drv_DirectAccessSPIWrite( (uint8_t) PHY_CTRL2, phyRegs[PHY_CTRL2]);
-
- // start the RX sequence
- MCR20Drv_DirectAccessSPIWrite( (uint8_t) PHY_CTRL1, phyRegs[PHY_CTRL1]);
-
- return gPhySuccess_c;
-}
-
-/*! *********************************************************************************
-* \brief This function will start a CCA / CCCA sequence
-*
-* \param[in] ccaParam the type of CCA
-* \param[in] cccaMode continuous or single CCA
-*
-* \return phyStatus_t
-*
-********************************************************************************** */
-phyStatus_t PhyPlmeCcaEdRequest( phyCCAType_t ccaParam, phyContCCAMode_t cccaMode )
-{
- uint8_t phyRegs[5];
-
-#ifdef PHY_PARAMETERS_VALIDATION
- // illegal CCA type
- if( (ccaParam != gPhyCCAMode1_c) && (ccaParam != gPhyCCAMode2_c) && (ccaParam != gPhyCCAMode3_c) && (ccaParam != gPhyEnergyDetectMode_c))
- {
- return gPhyInvalidParameter_c;
- }
-
- // cannot perform Continuous CCA using ED type
- if( (ccaParam == gPhyEnergyDetectMode_c) && (cccaMode == gPhyContCcaEnabled) )
- {
- return gPhyInvalidParameter_c;
- }
-#endif // PHY_PARAMETERS_VALIDATION
-
- if( gIdle_c != PhyPpGetState() )
- {
- return gPhyBusy_c;
- }
-
- // write in PHY CTRL4 the desired type of CCA
- phyRegs[0] = MCR20Drv_DirectAccessSPIRead(PHY_CTRL4);
- phyRegs[0] &= (uint8_t) ~(cPHY_CTRL4_CCATYPE << cPHY_CTRL4_CCATYPE_Shift_c);
- phyRegs[0] |= (uint8_t) ((cPHY_CTRL4_CCATYPE & ccaParam) << (cPHY_CTRL4_CCATYPE_Shift_c));
- MCR20Drv_DirectAccessSPIWrite( (uint8_t)PHY_CTRL4, phyRegs[0]);
-
- phyRegs[0] = MCR20Drv_DirectAccessSPIMultiByteRead(IRQSTS2, &phyRegs[1], 4);
-
- // continuous CCA
- if(cccaMode == gPhyContCcaEnabled)
- {
- // start the continuous CCA sequence
- // immediately or by TC2', depending on a previous PhyTimeSetEventTrigger() call)
- phyRegs[PHY_CTRL1] &= (uint8_t) ~(cPHY_CTRL1_XCVSEQ);
- phyRegs[PHY_CTRL1] |= gCCCA_c;
- // at the end of the scheduled sequence, an interrupt will occur:
- // CCA , SEQ or TMR3
- }
- // normal CCA (not continuous)
- else
- {
- // start the CCA or ED sequence (this depends on CcaType used)
- // immediately or by TC2', depending on a previous PhyTimeSetEventTrigger() call)
- phyRegs[PHY_CTRL1] &= (uint8_t) ~(cPHY_CTRL1_XCVSEQ);
- phyRegs[PHY_CTRL1] |= gCCA_c;
- // at the end of the scheduled sequence, an interrupt will occur:
- // CCA , SEQ or TMR3
- }
-
- phyRegs[PHY_CTRL2] &= (uint8_t) ~(cPHY_CTRL2_SEQMSK); // unmask SEQ interrupt
-
- // ensure that no spurious interrupts are raised
- phyRegs[IRQSTS3] &= 0xF0; // do not change IRQ status
- phyRegs[IRQSTS3] |= (uint8_t) (cIRQSTS3_TMR3MSK |
- cIRQSTS3_TMR2IRQ |
- cIRQSTS3_TMR3IRQ); // mask TMR3 interrupt
-
- MCR20Drv_DirectAccessSPIMultiByteWrite(IRQSTS1, phyRegs, 3);
-
- // start the CCA/ED or CCCA sequence
- MCR20Drv_DirectAccessSPIWrite( (uint8_t) PHY_CTRL2, phyRegs[PHY_CTRL2]);
- MCR20Drv_DirectAccessSPIWrite( (uint8_t) PHY_CTRL1, phyRegs[PHY_CTRL1]);
-
- return gPhySuccess_c;
-}
-
-/*! *********************************************************************************
-* \brief This function will set the channel number for the specified PAN
-*
-* \param[in] channel new channel number
-* \param[in] pan the PAN registers (0/1)
-*
-* \return phyStatus_t
-*
-********************************************************************************** */
-phyStatus_t PhyPlmeSetCurrentChannelRequest
-(
- uint8_t channel,
- uint8_t pan
-)
-{
-
-#ifdef PHY_PARAMETERS_VALIDATION
- if((channel < 11) || (channel > 26))
- {
- return gPhyInvalidParameter_c;
- }
-#endif // PHY_PARAMETERS_VALIDATION
-
- if( !pan )
- {
- gPhyCurrentChannelPAN0 = channel;
- MCR20Drv_DirectAccessSPIWrite(PLL_INT0, pll_int[channel - 11]);
- MCR20Drv_DirectAccessSPIMultiByteWrite(PLL_FRAC0_LSB, (uint8_t *) &pll_frac[channel - 11], 2);
- }
- else
- {
- gPhyCurrentChannelPAN1 = channel;
- MCR20Drv_IndirectAccessSPIWrite(PLL_INT1, pll_int[channel - 11]);
- MCR20Drv_IndirectAccessSPIMultiByteWrite(PLL_FRAC1_LSB, (uint8_t *) &pll_frac[channel - 11], 2);
- }
- return gPhySuccess_c;
-}
-
-/*! *********************************************************************************
-* \brief This function will return the current channel for a specified PAN
-*
-* \param[in] pan the PAN registers (0/1)
-*
-* \return uint8_t current channel number
-*
-********************************************************************************** */
-uint8_t PhyPlmeGetCurrentChannelRequest
-(
- uint8_t pan
-)
-{
- if( !pan )
- return gPhyCurrentChannelPAN0;
- else
- return gPhyCurrentChannelPAN1;
-}
-
-/*! *********************************************************************************
-* \brief This function will set the radio Tx power
-*
-* \param[in] pwrStep the Tx power
-*
-* \return phyStatus_t
-*
-********************************************************************************** */
-phyStatus_t PhyPlmeSetPwrLevelRequest
-(
- uint8_t pwrStep
-)
-{
-#ifdef PHY_PARAMETERS_VALIDATION
- if((pwrStep < 3) || (pwrStep > 31)) //-40 dBm to 16 dBm
- {
- return gPhyInvalidParameter_c;
- }
-#endif // PHY_PARAMETERS_VALIDATION
-
- MCR20Drv_DirectAccessSPIWrite(PA_PWR, (uint8_t)(pwrStep & 0x1F));
- return gPhySuccess_c;
-}
-
-/*---------------------------------------------------------------------------
- * Name: PhyPlmeSetLQIModeRequest
- * Description: -
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-uint8_t PhyPlmeSetLQIModeRequest(uint8_t lqiMode)
-{
- uint8_t currentMode;
-
- currentMode = MCR20Drv_IndirectAccessSPIRead(CCA_CTRL);
- lqiMode ? (currentMode |= cCCA_CTRL_LQI_RSSI_NOT_CORR) : (currentMode &= (~((uint8_t)cCCA_CTRL_LQI_RSSI_NOT_CORR)));
- MCR20Drv_IndirectAccessSPIWrite(CCA_CTRL, currentMode);
-
- return gPhySuccess_c;
-}
-
-/*---------------------------------------------------------------------------
- * Name: PhyPlmeGetRSSILevelRequest
- * Description: -
- * Parameters: -
- * Return: -
- *---------------------------------------------------------------------------*/
-uint8_t PhyPlmeGetRSSILevelRequest(void)
-{
- return MCR20Drv_IndirectAccessSPIRead(RSSI);
-}
-
-/*! *********************************************************************************
-* \brief This function will set the value of PHY PIBs
-*
-* \param[in] pibId the Id of the PIB
-* \param[in] pibValue the new value of the PIB
-* \param[in] phyRegistrySet the PAN registers (0/1)
-* \param[in] instanceId the instance of the PHY
-*
-* \return phyStatus_t
-*
-********************************************************************************** */
-phyStatus_t PhyPlmeSetPIBRequest(phyPibId_t pibId, uint64_t pibValue, uint8_t phyRegistrySet, instanceId_t instanceId)
-{
- phyStatus_t result = gPhySuccess_c;
-
- switch(pibId)
- {
- case gPhyPibCurrentChannel_c:
- {
- result = PhyPlmeSetCurrentChannelRequest((uint8_t) pibValue, phyRegistrySet);
- }
- break;
- case gPhyPibTransmitPower_c:
- {
- result = PhyPlmeSetPwrLevelRequest((uint8_t) pibValue);
- }
- break;
- case gPhyPibLongAddress_c:
- {
- uint64_t longAddr = pibValue;
- result = PhyPpSetLongAddr((uint8_t *) &longAddr, phyRegistrySet);
- }
- break;
- case gPhyPibShortAddress_c:
- {
- uint16_t shortAddr = (uint16_t) pibValue;
- result = PhyPpSetShortAddr((uint8_t *) &shortAddr, phyRegistrySet);
- }
- break;
- case gPhyPibPanId_c:
- {
- uint16_t panId = (uint16_t) pibValue;
- result = PhyPpSetPanId((uint8_t *) &panId, phyRegistrySet);
- }
- break;
- case gPhyPibPanCoordinator_c:
- {
- bool_t macRole = (bool_t) pibValue;
- result = PhyPpSetMacRole(macRole, phyRegistrySet);
- }
- break;
- case gPhyPibCurrentPage_c:
- {
- /* Nothinh to do... */
- }
- break;
- case gPhyPibPromiscuousMode_c:
- {
- PhyPpSetPromiscuous((uint8_t)pibValue);
- }
- break;
- case gPhyPibRxOnWhenIdle:
- {
- PhyPlmeSetRxOnWhenIdle( (bool_t)pibValue, instanceId );
- }
- break;
- case gPhyPibFrameWaitTime_c:
- {
- PhyPlmeSetFrameWaitTime( (uint32_t)pibValue, instanceId );
- }
- break;
- case gPhyPibDeferTxIfRxBusy_c:
- {
- if( pibValue )
- phyLocal[instanceId].flags |= gPhyFlagDeferTx_c;
- else
- phyLocal[instanceId].flags &= ~gPhyFlagDeferTx_c;
- }
- break;
- default:
- {
- result = gPhyUnsupportedAttribute_c;
- }
- break;
- }
-
- return result;
-}
-
-/*! *********************************************************************************
-* \brief This function will return the value of PHY PIBs
-*
-* \param[in] pibId the Id of the PIB
-* \param[out] pibValue pointer to a location where the value will be stored
-* \param[in] phyRegistrySet the PAN registers (0/1)
-* \param[in] instanceId the instance of the PHY
-*
-* \return phyStatus_t
-*
-********************************************************************************** */
-phyStatus_t PhyPlmeGetPIBRequest(phyPibId_t pibId, uint64_t * pibValue, uint8_t phyRegistrySet, instanceId_t instanceId)
-{
- phyStatus_t result = gPhySuccess_c;
- switch(pibId)
- {
- case gPhyPibCurrentChannel_c:
- {
- *((uint8_t*)pibValue) = (uint64_t) PhyPlmeGetCurrentChannelRequest(phyRegistrySet);
- }
- break;
- case gPhyPibTransmitPower_c:
- {
- *((uint8_t*)pibValue) = MCR20Drv_DirectAccessSPIRead(PA_PWR);
- }
- break;
- case gPhyPibLongAddress_c:
- {
- if( !phyRegistrySet )
- MCR20Drv_IndirectAccessSPIMultiByteRead( MACLONGADDRS0_0, (uint8_t*)pibValue, 8);
- else
- MCR20Drv_IndirectAccessSPIMultiByteRead( MACLONGADDRS1_0, (uint8_t*)pibValue, 8);
- }
- break;
- case gPhyPibShortAddress_c:
- {
- if( !phyRegistrySet )
- MCR20Drv_IndirectAccessSPIMultiByteRead( MACSHORTADDRS0_LSB, (uint8_t*)pibValue, 2);
- else
- MCR20Drv_IndirectAccessSPIMultiByteRead( MACSHORTADDRS1_LSB, (uint8_t*)pibValue, 2);
- }
- break;
- case gPhyPibPanId_c:
- {
- if( !phyRegistrySet )
- MCR20Drv_IndirectAccessSPIMultiByteRead( MACPANID0_LSB, (uint8_t*)pibValue, 2);
- else
- MCR20Drv_IndirectAccessSPIMultiByteRead( MACPANID1_LSB, (uint8_t*)pibValue, 2);
- }
- break;
- case gPhyPibPanCoordinator_c:
- {
- uint8_t phyReg;
-
- if( !phyRegistrySet )
- {
- phyReg = MCR20Drv_DirectAccessSPIRead( PHY_CTRL4);
- phyReg = (phyReg & cPHY_CTRL4_PANCORDNTR0) == cPHY_CTRL4_PANCORDNTR0;
- }
- else
- {
- phyReg = MCR20Drv_IndirectAccessSPIRead( (uint8_t) DUAL_PAN_CTRL);
- phyReg = (phyReg & cDUAL_PAN_CTRL_PANCORDNTR1) == cDUAL_PAN_CTRL_PANCORDNTR1;
- }
-
- *((uint8_t*)pibValue) = phyReg;
- }
- break;
- case gPhyPibRxOnWhenIdle:
- {
- *((uint8_t*)pibValue) = !!(phyLocal[instanceId].flags & gPhyFlagRxOnWhenIdle_c);
- }
- break;
- case gPhyPibFrameWaitTime_c:
- {
- *((uint8_t*)pibValue) = phyLocal[instanceId].maxFrameWaitTime;
- }
- break;
- case gPhyPibDeferTxIfRxBusy_c:
- {
- *((uint8_t*)pibValue) = !!(phyLocal[instanceId].flags & gPhyFlagDeferTx_c);
- }
- break;
- default:
- {
- result = gPhyUnsupportedAttribute_c;
- }
- break;
- }
-
- return result;
-
-}
-
-/************************************************************************************
-*************************************************************************************
-* Private functions
-*************************************************************************************
-************************************************************************************/
-static void PhyRxRetry( uint32_t param )
-{
- PhyPlmeRxRequest( ((phyRxParams_t*)param)->phyRxMode, (phyRxParams_t*)param );
-}
--- a/FSL_IEEE_802_15_4/PHY/PhyStateMachine.c Fri Jul 31 13:49:46 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,1044 +0,0 @@
-/*!
-* Copyright (c) 2015, Freescale Semiconductor, Inc.
-* All rights reserved.
-*
-* \file PhyStateMachine.c
-*
-* Redistribution and use in source and binary forms, with or without modification,
-* are permitted provided that the following conditions are met:
-*
-* o Redistributions of source code must retain the above copyright notice, this list
-* of conditions and the following disclaimer.
-*
-* o Redistributions in binary form must reproduce the above copyright notice, this
-* list of conditions and the following disclaimer in the documentation and/or
-* other materials provided with the distribution.
-*
-* o Neither the name of Freescale Semiconductor, Inc. nor the names of its
-* contributors may be used to endorse or promote products derived from this
-* software without specific prior written permission.
-*
-* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
-* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
-* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-*/
-
-
-#ifdef gSrcTask_d
-#undef gSrcTask_d
-#endif
-
-#define gSrcTask_d PHY
-
-
-/************************************************************************************
-*************************************************************************************
-* Include
-*************************************************************************************
-************************************************************************************/
-#include "EmbeddedTypes.h"
-
-//#include "fsl_os_abstraction.h"
-
-#include "PhyInterface.h"
-#include "Phy.h"
-
-
-#include "MemManager.h"
-#include "FunctionLib.h"
-#if 0
-#include "Messaging.h"
-#include "Panic.h"
-#endif
-
-#include "MCR20Drv.h"
-#include "MCR20Reg.h"
-
-#include "AspInterface.h"
-#include "MpmInterface.h"
-
-/************************************************************************************
-*************************************************************************************
-* Public macros
-*************************************************************************************
-************************************************************************************/
-#define mPhyMaxIdleRxDuration_c (0xF00000) /* [sym] */
-
-#define ProtectFromXcvrInterrupt() ProtectFromMCR20Interrupt()
-#define UnprotectFromXcvrInterrupt() UnprotectFromMCR20Interrupt()
-
-/************************************************************************************
-*************************************************************************************
-* Private type definitions
-*************************************************************************************
-************************************************************************************/
-
-/************************************************************************************
-*************************************************************************************
-* Private prototypes
-*************************************************************************************
-************************************************************************************/
-static void Phy24Task(Phy_PhyLocalStruct_t *pPhyData);
-
-static phyStatus_t Phy_HandlePdDataReq( Phy_PhyLocalStruct_t *pPhyData, macToPdDataMessage_t * pMsg );
-
-static void Phy_EnterIdle( Phy_PhyLocalStruct_t *pPhyData );
-
-static void PLME_SendMessage(Phy_PhyLocalStruct_t *pPhyData, phyMessageId_t msgType);
-
-static void PD_SendMessage(Phy_PhyLocalStruct_t *pPhyData, phyMessageId_t msgType);
-
-
-static void MSG_InitQueue(macPhyInputQueue_t * pMacPhyQueue);
-static void MSG_Queue(macPhyInputQueue_t * pMacPhyQueue, void * pMsgIn);
-static void MSG_QueueHead(macPhyInputQueue_t * pMacPhyQueue, void * pMsgIn);
-static bool_t MSG_Pending(macPhyInputQueue_t * pMacPhyQueue);
-static void * MSG_DeQueue(macPhyInputQueue_t * pMacPhyQueue);
-
-/************************************************************************************
-*************************************************************************************
-* Private memory declarations
-*************************************************************************************
-************************************************************************************/
-Phy_PhyLocalStruct_t phyLocal[gPhyInstancesCnt_c];
-extern volatile uint32_t mPhySeqTimeout;
-
-/************************************************************************************
-*************************************************************************************
-* Public functions
-*************************************************************************************
-************************************************************************************/
-
-/*! *********************************************************************************
-* \brief This function creates the PHY task
-*
-********************************************************************************** */
-void Phy_Init(void)
-{
- uint32_t i;
-
- PhyHwInit();
- ASP_Init( 0, gAspInterfaceId );
- MPM_Init();
-
- for( i=0; i<gPhyInstancesCnt_c; i++ )
- {
- phyLocal[i].flags = gPhyFlagDeferTx_c;
- phyLocal[i].rxParams.pRxData = NULL;
-
- /* Prepare input queues.*/
- MSG_InitQueue( &phyLocal[i].macPhyInputQueue );
- }
-
- PhyIsrPassRxParams( NULL );
- PhyPlmeSetPwrState( gPhyDefaultIdlePwrMode_c );
-}
-
-/*! *********************************************************************************
-* \brief This function binds a MAC instance to a PHY instance
-*
-* \param[in] instanceId The instance of the MAC
-*
-* \return The instance of the PHY.
-*
-********************************************************************************** */
-instanceId_t BindToPHY( instanceId_t macInstance )
-{
- return 0;
-}
-
-/*! *********************************************************************************
-* \brief This function registers the MAC PD and PLME SAP handlers
-*
-* \param[in] pPD_MAC_SapHandler Pointer to the MAC PD handler function
-* \param[in] pPLME_MAC_SapHandler Pointer to the MAC PLME handler function
-* \param[in] instanceId The instance of the PHY
-*
-* \return The status of the operation.
-*
-********************************************************************************** */
-void Phy_RegisterSapHandlers( PD_MAC_SapHandler_t pPD_MAC_SapHandler,
- PLME_MAC_SapHandler_t pPLME_MAC_SapHandler,
- instanceId_t instanceId )
-{
- phyLocal[instanceId].PD_MAC_SapHandler = pPD_MAC_SapHandler;
- phyLocal[instanceId].PLME_MAC_SapHandler = pPLME_MAC_SapHandler;
-}
-
-/*! *********************************************************************************
-* \brief This function represents the PHY's task
-*
-* \param[in] taskParam The instance of the PHY
-*
-********************************************************************************** */
-static void Phy24Task(Phy_PhyLocalStruct_t *pPhyStruct)
-{
- uint8_t state;
- phyMessageHeader_t * pMsgIn;
- phyStatus_t status = gPhySuccess_c;
-
- ProtectFromXcvrInterrupt();
- state = PhyGetSeqState();
-
- /* Handling messages from upper layer */
- while( MSG_Pending(&pPhyStruct->macPhyInputQueue) )
- {
- /* PHY doesn't free dynamic alocated messages! */
- pMsgIn = MSG_DeQueue( &pPhyStruct->macPhyInputQueue );
- pPhyStruct->currentMacInstance = pMsgIn->macInstance;
-
- if( gRX_c == state )
- {
- if( (pPhyStruct->flags & gPhyFlagDeferTx_c) && (pMsgIn->msgType == gPdDataReq_c) )
- {
- macToPdDataMessage_t *pPD = (macToPdDataMessage_t*)pMsgIn;
- uint8_t phyReg = MCR20Drv_DirectAccessSPIRead(SEQ_STATE) & 0x1F;
- /* Check for an Rx in progress, and if the packet can be defered.
- Packet cannot be defered */
- if( (pPD->msgData.dataReq.CCABeforeTx != gPhyNoCCABeforeTx_c) &&
- (pPD->msgData.dataReq.startTime == gPhySeqStartAsap_c) &&
- (pPD->msgData.dataReq.slottedTx == gPhyUnslottedMode_c) &&
- (phyReg <= 0x06 || phyReg == 0x15 || phyReg == 0x16) )
- {
- MSG_QueueHead( &pPhyStruct->macPhyInputQueue, pMsgIn );
- UnprotectFromXcvrInterrupt();
- return;
- }
- }
-
-// if( pPhyStruct->flags & gPhyFlagIdleRx_c )
- {
- PhyPlmeForceTrxOffRequest();
- state = gIdle_c;
- pPhyStruct->flags &= ~(gPhyFlagIdleRx_c);
- }
- }
-
- if( gIdle_c != state )
- {
- /* try again later */
- MSG_QueueHead( &pPhyStruct->macPhyInputQueue, pMsgIn );
- UnprotectFromXcvrInterrupt();
- return;
- }
-
-#if gMpmIncluded_d
- if( status == gPhySuccess_c )
- {
- status = MPM_PrepareForTx( pMsgIn->macInstance );
- }
-#endif
-
- if( status == gPhySuccess_c )
- {
- pPhyStruct->flags &= ~(gPhyFlagIdleRx_c);
-
- switch( pMsgIn->msgType )
- {
- case gPdDataReq_c:
- status = Phy_HandlePdDataReq( pPhyStruct, (macToPdDataMessage_t *)pMsgIn );
- break;
- case gPlmeCcaReq_c:
- status = PhyPlmeCcaEdRequest(gPhyCCAMode1_c, gPhyContCcaDisabled);
- break;
- case gPlmeEdReq_c:
- status = PhyPlmeCcaEdRequest(gPhyEnergyDetectMode_c, gPhyContCcaDisabled);
- break;
- default:
- status = gPhyInvalidPrimitive_c;
- }
- }
-
- /* Check status */
- if( gPhySuccess_c == status )
- {
- UnprotectFromXcvrInterrupt();
- return;
- }
- else
- {
- switch( pMsgIn->msgType )
- {
- case gPdDataReq_c:
- if( ((macToPdDataMessage_t*)pMsgIn)->msgData.dataReq.CCABeforeTx == gPhyNoCCABeforeTx_c )
- {
- PD_SendMessage(pPhyStruct, gPdDataCnf_c);
- break;
- }
- /* Fallthorough */
- case gPlmeCcaReq_c:
- pPhyStruct->channelParams.channelStatus = gPhyChannelBusy_c;
- PLME_SendMessage(pPhyStruct, gPlmeCcaCnf_c);
- break;
- case gPlmeEdReq_c:
- pPhyStruct->channelParams.energyLeveldB = 0;
- PLME_SendMessage(pPhyStruct, gPlmeEdCnf_c);
- break;
- default:
- PLME_SendMessage(pPhyStruct, gPlmeTimeoutInd_c);
- }
- }
- }/* while( MSG_Pending(&pPhyStruct->macPhyInputQueue) ) */
-
- UnprotectFromXcvrInterrupt();
-
- /* Check if PHY can enter Idle state */
- if( gIdle_c == state )
- {
- Phy_EnterIdle( pPhyStruct );
- }
-}
-
-/*! *********************************************************************************
-* \brief This is the PD SAP message handler
-*
-* \param[in] pMsg Pointer to the PD request message
-* \param[in] instanceId The instance of the PHY
-*
-* \return The status of the operation.
-*
-********************************************************************************** */
-phyStatus_t MAC_PD_SapHandler(macToPdDataMessage_t *pMsg, instanceId_t phyInstance)
-{
- phyStatus_t result = gPhySuccess_c;
- uint8_t baseIndex = 0;
-
- if( NULL == pMsg )
- {
- return gPhyInvalidParameter_c;
- }
-
-#if gMpmIncluded_d
- if( pMsg->msgType == gPdIndQueueInsertReq_c || pMsg->msgType == gPdIndQueueRemoveReq_c )
- {
- baseIndex = MPM_GetRegSet( MPM_GetPanIndex( pMsg->macInstance ) ) *
- (gPhyIndirectQueueSize_c/gMpmPhyPanRegSets_c);
- }
-#endif
-
- switch( pMsg->msgType )
- {
- case gPdIndQueueInsertReq_c:
- result = PhyPp_IndirectQueueInsert(baseIndex + pMsg->msgData.indQueueInsertReq.index,
- pMsg->msgData.indQueueInsertReq.checksum,
- phyInstance);
- break;
-
- case gPdIndQueueRemoveReq_c:
- result = PhyPp_RemoveFromIndirect(baseIndex + pMsg->msgData.indQueueRemoveReq.index,
- phyInstance);
- break;
-
- case gPdDataReq_c:
- MSG_Queue(&phyLocal[phyInstance].macPhyInputQueue, pMsg);
- Phy24Task( &phyLocal[phyInstance] );
- break;
-
- default:
- result = gPhyInvalidPrimitive_c;
- }
-
- return result;
-}
-
-/*! *********************************************************************************
-* \brief This is the PLME SAP message handler
-*
-* \param[in] pMsg Pointer to the PLME request message
-* \param[in] instanceId The instance of the PHY
-*
-* \return phyStatus_t The status of the operation.
-*
-********************************************************************************** */
-phyStatus_t MAC_PLME_SapHandler(macToPlmeMessage_t * pMsg, instanceId_t phyInstance)
-{
- Phy_PhyLocalStruct_t *pPhyStruct = &phyLocal[phyInstance];
- uint8_t phyRegSet = 0;
-#if gMpmIncluded_d
- phyStatus_t result;
- int32_t panIdx = MPM_GetPanIndex( pMsg->macInstance );
-
- phyRegSet = MPM_GetRegSet( panIdx );
-#endif
-
- if( NULL == pMsg )
- {
- return gPhyInvalidParameter_c;
- }
-
- switch( pMsg->msgType )
- {
- case gPlmeEdReq_c:
- case gPlmeCcaReq_c:
- MSG_Queue(&phyLocal[phyInstance].macPhyInputQueue, pMsg);
- Phy24Task( &phyLocal[phyInstance] );
- break;
-
- case gPlmeSetReq_c:
-#if gMpmIncluded_d
- result = MPM_SetPIB(pMsg->msgData.setReq.PibAttribute,
- &pMsg->msgData.setReq.PibAttributeValue,
- panIdx );
- if( !MPM_isPanActive(panIdx) )
- {
- return result;
- }
-#endif
- return PhyPlmeSetPIBRequest(pMsg->msgData.setReq.PibAttribute, pMsg->msgData.setReq.PibAttributeValue, phyRegSet, phyInstance);
-
- case gPlmeGetReq_c:
-#if gMpmIncluded_d
- if( gPhySuccess_c == MPM_GetPIB(pMsg->msgData.getReq.PibAttribute, pMsg->msgData.getReq.pPibAttributeValue, panIdx) )
- {
- break;
- }
-#endif
- return PhyPlmeGetPIBRequest( pMsg->msgData.getReq.PibAttribute, pMsg->msgData.getReq.pPibAttributeValue, phyRegSet, phyInstance);
-
- case gPlmeSetTRxStateReq_c:
- if(gPhySetRxOn_c == pMsg->msgData.setTRxStateReq.state)
- {
- if( PhyIsIdleRx(phyInstance) )
- {
- PhyPlmeForceTrxOffRequest();
- }
- else if( gIdle_c != PhyGetSeqState() )
- {
- return gPhyBusy_c;
- }
-#if gMpmIncluded_d
- /* If another PAN has the RxOnWhenIdle PIB set, enable the DualPan Auto mode */
- if( gPhySuccess_c != MPM_PrepareForRx( pMsg->macInstance ) )
- return gPhyBusy_c;
-#endif
- pPhyStruct->flags &= ~(gPhyFlagIdleRx_c);
- Phy_SetSequenceTiming(pMsg->msgData.setTRxStateReq.startTime,
- pMsg->msgData.setTRxStateReq.rxDuration);
-
- return PhyPlmeRxRequest(pMsg->msgData.setTRxStateReq.slottedMode, (phyRxParams_t *) &pPhyStruct->rxParams);
- }
- else if (gPhyForceTRxOff_c == pMsg->msgData.setTRxStateReq.state)
- {
-#if gMpmIncluded_d
- if( !MPM_isPanActive(panIdx) )
- return gPhySuccess_c;
-#endif
- pPhyStruct->flags &= ~(gPhyFlagIdleRx_c);
- PhyPlmeForceTrxOffRequest();
- }
- break;
-
- default:
- return gPhyInvalidPrimitive_c;
- }
-
- return gPhySuccess_c;
-}
-
-/*! *********************************************************************************
-* \brief This function programs a new TX sequence
-*
-* \param[in] pMsg Pointer to the PD request message
-* \param[in] pPhyData pointer to PHY data
-*
-* \return The status of the operation.
-*
-********************************************************************************** */
-static phyStatus_t Phy_HandlePdDataReq( Phy_PhyLocalStruct_t *pPhyData, macToPdDataMessage_t * pMsg )
-{
- phyStatus_t status = gPhySuccess_c;
- uint32_t time;
-
- if( NULL == pMsg->msgData.dataReq.pPsdu )
- {
- return gPhyInvalidParameter_c;
- }
-
- ProtectFromXcvrInterrupt();
-
- if( pMsg->msgData.dataReq.startTime != gPhySeqStartAsap_c )
- {
- PhyTimeSetEventTrigger( (uint16_t) pMsg->msgData.dataReq.startTime );
- }
-
- status = PhyPdDataRequest(&pMsg->msgData.dataReq , &pPhyData->rxParams, &pPhyData->txParams);
-
- if( pMsg->msgData.dataReq.txDuration != gPhySeqStartAsap_c )
- {
- OSA_EnterCritical(kCriticalDisableInt);
- PhyTimeReadClock( &time );
- time += pMsg->msgData.dataReq.txDuration;
- /* Compensate PHY overhead, including WU time */
- time += 54;
- PhyTimeSetEventTimeout( &time );
- OSA_ExitCritical(kCriticalDisableInt);
- }
-
- UnprotectFromXcvrInterrupt();
-
- if( gPhySuccess_c != status )
- {
- PhyTimeDisableEventTrigger();
- PhyTimeDisableEventTimeout();
- }
-
- return status;
-}
-
-/*! *********************************************************************************
-* \brief This function sets the start time and the timeout value for a sequence.
-*
-* \param[in] startTime The absolute start time for the sequence.
-* If startTime is gPhySeqStartAsap_c, the start timer is disabled.
-* \param[in] seqDuration The duration of the sequence.
-* If seqDuration is 0xFFFFFFFF, the timeout is disabled.
-*
-********************************************************************************** */
-void Phy_SetSequenceTiming(uint32_t startTime, uint32_t seqDuration)
-{
- uint32_t endTime;
-
- OSA_EnterCritical(kCriticalDisableInt);
-
- if( gPhySeqStartAsap_c == startTime )
- {
- PhyTimeReadClock( &endTime );
- }
- else
- {
- PhyTimeSetEventTrigger( (uint16_t) startTime );
- endTime = startTime & gPhyTimeMask_c;
- }
-
- if( 0xFFFFFFFF != seqDuration )
- {
- endTime += seqDuration;
- endTime = endTime & gPhyTimeMask_c;
-
- PhyTimeSetEventTimeout( &(endTime) );
- }
-
- OSA_ExitCritical(kCriticalDisableInt);
-}
-
-/*! *********************************************************************************
-* \brief This function starts the IdleRX if the PhyRxOnWhenIdle PIB is set
-*
-* \param[in] pPhyData pointer to PHY data
-*
-********************************************************************************** */
-void Phy_EnterIdle( Phy_PhyLocalStruct_t *pPhyData )
-{
- if( (pPhyData->flags & gPhyFlagRxOnWhenIdle_c)
-#if gMpmIncluded_d
- /* Prepare the Active PAN/PANs */
- && (gPhySuccess_c == MPM_PrepareForRx(gInvalidInstanceId_c))
-#endif
- )
- {
- pPhyData->flags |= gPhyFlagIdleRx_c;
- Phy_SetSequenceTiming( gPhySeqStartAsap_c, mPhyMaxIdleRxDuration_c );
- (void)PhyPlmeRxRequest( gPhyUnslottedMode_c, (phyRxParams_t*)&pPhyData->rxParams );
- }
- else
- {
- pPhyData->flags &= ~(gPhyFlagIdleRx_c);
- }
-}
-
-/*! *********************************************************************************
-* \brief This function sets the value of the maxFrameWaitTime PIB
-*
-* \param[in] instanceId The instance of the PHY
-* \param[in] time The maxFrameWaitTime value
-*
-********************************************************************************** */
-void PhyPlmeSetFrameWaitTime( uint32_t time, instanceId_t instanceId )
-{
- phyLocal[instanceId].maxFrameWaitTime = time;
-}
-
-/*! *********************************************************************************
-* \brief This function sets the state of the PhyRxOnWhenIdle PIB
-*
-* \param[in] instanceId The instance of the PHY
-* \param[in] state The PhyRxOnWhenIdle value
-*
-********************************************************************************** */
-void PhyPlmeSetRxOnWhenIdle( bool_t state, instanceId_t instanceId )
-{
- uint8_t radioState = PhyGetSeqState();
-#if gMpmIncluded_d
- /* Check if at least one PAN has RxOnWhenIdle set */
- if( FALSE == state )
- {
- uint32_t i;
-
- for( i=0; i<gMpmMaxPANs_c; i++ )
- {
- MPM_GetPIB( gPhyPibRxOnWhenIdle, &state, i );
- if( state )
- break;
- }
- }
-#endif
- if( state )
- {
- phyLocal[instanceId].flags |= gPhyFlagRxOnWhenIdle_c;
- if( radioState == gIdle_c)
- {
- Phy_EnterIdle( &phyLocal[instanceId] );
- }
-#if gMpmIncluded_d
- else if( (radioState == gRX_c) && (phyLocal[instanceId].flags & gPhyFlagIdleRx_c) )
- {
- PhyPlmeForceTrxOffRequest();
- Phy_EnterIdle( &phyLocal[instanceId] );
- }
-#endif
- }
- else
- {
- phyLocal[instanceId].flags &= ~gPhyFlagRxOnWhenIdle_c;
- if( (radioState == gRX_c) && (phyLocal[instanceId].flags & gPhyFlagIdleRx_c) )
- {
- PhyPlmeForceTrxOffRequest();
- phyLocal[instanceId].flags &= ~gPhyFlagIdleRx_c;
- }
- }
-}
-
-/*! *********************************************************************************
-* \brief This function starts the IdleRX if the PhyRxOnWhenIdle PIB is set
-*
-* \param[in] instanceId The instance of the PHY
-*
-********************************************************************************** */
-bool_t PhyIsIdleRx( instanceId_t instanceId )
-{
- if( (phyLocal[instanceId].flags & gPhyFlagIdleRx_c) && (gRX_c == PhyGetSeqState()))
- return TRUE;
-
- return FALSE;
-}
-
-/*! *********************************************************************************
-* \brief This function signals the PHY task that a TX operation completed successfully.
-* If the received ACK has FP=1, then the radio will enter RX state for
-* maxFrameWaitTime duration.
-*
-* \param[in] instanceId The instance of the PHY
-* \param[in] framePending The value of the framePending bit for the received ACK
-*
-********************************************************************************** */
-void Radio_Phy_PdDataConfirm(instanceId_t instanceId, bool_t framePending)
-{
- PhyTimeDisableEventTimeout();
-
- if( framePending )
- {
- phyLocal[instanceId].flags |= gPhyFlagFramePending_c;
- if( phyLocal[instanceId].maxFrameWaitTime > 0 )
- {
- /* Restart Rx asap if an ACK with FP=1 is received */
- phyLocal[instanceId].flags &= ~(gPhyFlagIdleRx_c);
- Phy_SetSequenceTiming( gPhySeqStartAsap_c, phyLocal[instanceId].maxFrameWaitTime );
- PhyPlmeRxRequest( gPhyUnslottedMode_c, (phyRxParams_t *) &phyLocal[instanceId].rxParams );
- }
- }
- else
- {
- phyLocal[instanceId].flags &= ~gPhyFlagFramePending_c;
- }
-
- PD_SendMessage(&phyLocal[instanceId], gPdDataCnf_c);
- Phy24Task(&phyLocal[instanceId]);
-}
-
-/*! *********************************************************************************
-* \brief This function signals the PHY task that new data has been received
-*
-* \param[in] instanceId The instance of the PHY
-*
-********************************************************************************** */
-void Radio_Phy_PdDataIndication(instanceId_t instanceId)
-{
- PhyTimeDisableEventTimeout();
-
- PD_SendMessage(&phyLocal[instanceId], gPdDataInd_c);
- Phy24Task(&phyLocal[instanceId]);
-}
-
-/*! *********************************************************************************
-* \brief This function signals the PHY task that timer1 compare match occured
-*
-* \param[in] instanceId The instance of the PHY
-*
-********************************************************************************** */
-void Radio_Phy_TimeWaitTimeoutIndication(instanceId_t instanceId)
-{
- PhyTime_ISR();
-}
-
-/*! *********************************************************************************
-* \brief This function signals the PHY task that a CCA sequence has finished
-*
-* \param[in] instanceId The instance of the PHY
-* \param[in] phyChannelStatus The status of the channel: Idle/Busy
-*
-* \return None.
-*
-********************************************************************************** */
-void Radio_Phy_PlmeCcaConfirm(phyStatus_t phyChannelStatus, instanceId_t instanceId)
-{
- PhyTimeDisableEventTimeout();
-
- phyLocal[instanceId].channelParams.channelStatus = phyChannelStatus;
-
- PLME_SendMessage(&phyLocal[instanceId], gPlmeCcaCnf_c);
- Phy24Task(&phyLocal[instanceId]);
-}
-
-/*! *********************************************************************************
-* \brief This function signals the PHY task that a ED sequence has finished
-*
-* \param[in] instanceId The instance of the PHY
-* \param[in] energyLevel The enetgy level on the channel.
-* \param[in] energyLeveldB The energy level in DB
-*
-********************************************************************************** */
-void Radio_Phy_PlmeEdConfirm(uint8_t energyLeveldB, instanceId_t instanceId)
-{
- PhyTimeDisableEventTimeout();
-
- phyLocal[instanceId].channelParams.energyLeveldB = energyLeveldB;
-
- PLME_SendMessage(&phyLocal[instanceId], gPlmeEdCnf_c);
- Phy24Task(&phyLocal[instanceId]);
-}
-
-/*! *********************************************************************************
-* \brief This function signals the PHY task that the programmed sequence has timed out
-* The Radio is forced to Idle.
-*
-* \param[in] instanceId The instance of the PHY
-*
-********************************************************************************** */
-void Radio_Phy_TimeRxTimeoutIndication(instanceId_t instanceId)
-{
- if( !(phyLocal[instanceId].flags & gPhyFlagIdleRx_c) )
- PLME_SendMessage(&phyLocal[instanceId], gPlmeTimeoutInd_c);
-
- Phy24Task(&phyLocal[instanceId]);
-}
-
-/*! *********************************************************************************
-* \brief This function signals the PHY task that the programmed sequence has started
-*
-* \param[in] instanceId The instance of the PHY
-*
-* \return None.
-*
-********************************************************************************** */
-void Radio_Phy_TimeStartEventIndication(instanceId_t instanceId)
-{
-#ifdef MAC_PHY_DEBUG
- PLME_SendMessage(&phyLocal[instanceId], gPlme_StartEventInd_c);
- Phy24Task(&phyLocal[instanceId]);
-#endif
-}
-
-/*! *********************************************************************************
-* \brief This function signals the PHY task that a SFD was detected.
-* Also, if there is not enough time to receive the entire packet, the
-* RX timeout will be extended.
-*
-* \param[in] instanceId The instance of the PHY
-* \param[in] frameLen the length of the PSDU
-*
-********************************************************************************** */
-void Radio_Phy_PlmeRxSfdDetect(instanceId_t instanceId, uint32_t frameLen)
-{
- if( phyLocal[instanceId].flags & gPhyFlagDeferTx_c )
- {
- uint32_t currentTime;
- uint32_t time;
-
- OSA_EnterCritical(kCriticalDisableInt);
-
- //Read currentTime and Timeout values [sym]
- PhyTimeReadClock(¤tTime);
-
- frameLen = frameLen * 2 + 12 + 22 + 2; //Convert to symbols and add IFS and ACK duration
-
- if( mPhySeqTimeout > currentTime )
- {
- time = mPhySeqTimeout - currentTime;
- }
- else
- {
- time = (gPhyTimeMask_c - currentTime + mPhySeqTimeout) & gPhyTimeMask_c;
- }
-
- if( time > 4 )
- {
- mPhySeqTimeout = (currentTime + frameLen) & gPhyTimeMask_c;
- MCR20Drv_DirectAccessSPIMultiByteWrite( T3CMP_LSB, (uint8_t *)&mPhySeqTimeout, 3);
- }
-
- OSA_ExitCritical(kCriticalDisableInt);
- }
-
-#ifdef MAC_PHY_DEBUG
- PLME_SendMessage(&phyLocal[instanceId], gPlme_RxSfdDetectInd_c);
- Phy24Task(&phyLocal[instanceId]);
-#endif
-}
-
-/*! *********************************************************************************
-* \brief This function signals the PHY task that a Sync Loss occured (PLL unlock)
-* The Radio is forced to Idle.
-*
-* \param[in] instanceId The instance of the PHY
-*
-********************************************************************************** */
-void Radio_Phy_PlmeSyncLossIndication(instanceId_t instanceId)
-{
- PhyPlmeForceTrxOffRequest();
-#ifdef MAC_PHY_DEBUG
- PLME_SendMessage(&phyLocal[instanceId], gPlme_SyncLossInd_c);
-#endif
- Radio_Phy_TimeRxTimeoutIndication(instanceId);
-}
-
-/*! *********************************************************************************
-* \brief This function signals the PHY task that a Filter Fail occured
-*
-* \param[in] instanceId The instance of the PHY
-*
-********************************************************************************** */
-void Radio_Phy_PlmeFilterFailRx(instanceId_t instanceId)
-{
-#ifdef MAC_PHY_DEBUG
- PLME_SendMessage(&phyLocal[instanceId], gPlme_FilterFailInd_c);
- Phy24Task(&phyLocal[instanceId]);
-#endif
-}
-
-/*! *********************************************************************************
-* \brief This function signals the PHY task that an unexpected Transceiver Reset
-* occured and force the TRX to Off
-*
-* \param[in] instanceId The instance of the PHY
-*
-********************************************************************************** */
-void Radio_Phy_UnexpectedTransceiverReset(instanceId_t instanceId)
-{
- PhyPlmeForceTrxOffRequest();
-#ifdef MAC_PHY_DEBUG
- PLME_SendMessage(&phyLocal[instanceId], gPlme_UnexpectedRadioResetInd_c);
-#endif
- Radio_Phy_TimeRxTimeoutIndication(instanceId);
-}
-
-/*! *********************************************************************************
-* \brief Senf a PLME message to upper layer
-*
-* \param[in] instanceId The instance of the PHY
-* \param[in] msgType The type of message to be sent
-*
-********************************************************************************** */
-static void PLME_SendMessage(Phy_PhyLocalStruct_t *pPhyStruct, phyMessageId_t msgType)
-{
- plmeToMacMessage_t * pMsg = MEM_BufferAlloc(sizeof(plmeToMacMessage_t));
-
- if(NULL == pMsg)
- {
- //panic(0,(uint32_t)PLME_SendMessage,0,msgType);
- return;
- }
-
- pMsg->msgType = msgType;
-
- switch(msgType)
- {
- case gPlmeCcaCnf_c:
- pMsg->msgData.ccaCnf.status = pPhyStruct->channelParams.channelStatus;
- break;
-
- case gPlmeEdCnf_c:
- pMsg->msgData.edCnf.status = gPhySuccess_c;
- pMsg->msgData.edCnf.energyLeveldB = pPhyStruct->channelParams.energyLeveldB;
- pMsg->msgData.edCnf.energyLevel = Phy_GetEnergyLevel(pPhyStruct->channelParams.energyLeveldB);
- break;
-
- default:
- /* No aditional info needs to be filled */
- break;
- }
-
- pPhyStruct->PLME_MAC_SapHandler(pMsg, pPhyStruct->currentMacInstance);
-}
-
-/*! *********************************************************************************
-* \brief Senf a PD message to upper layer
-*
-* \param[in] instanceId The instance of the PHY
-* \param[in] msgType The type of message to be sent
-*
-********************************************************************************** */
-static void PD_SendMessage(Phy_PhyLocalStruct_t *pPhyStruct, phyMessageId_t msgType)
-{
- pdDataToMacMessage_t *pMsg;
-
- if( msgType == gPdDataInd_c )
- {
- uint32_t temp;
- uint16_t len = pPhyStruct->rxParams.psduLength - 2; //Excluding FCS (2 bytes);
-
- pMsg = pPhyStruct->rxParams.pRxData;
- pPhyStruct->rxParams.pRxData = NULL;
-
-#if !gUsePBTransferThereshold_d
- MCR20Drv_PB_SPIBurstRead( (uint8_t *)(pMsg->msgData.dataInd.pPsdu), len );
-#endif
-
- pMsg->msgType = gPdDataInd_c;
- pMsg->msgData.dataInd.ppduLinkQuality = pPhyStruct->rxParams.linkQuality;
- pMsg->msgData.dataInd.psduLength = len;
-
- pMsg->msgData.dataInd.timeStamp = PhyTime_GetTimestamp(); //current timestamp (64bit)
- temp = (uint32_t)(pMsg->msgData.dataInd.timeStamp & gPhyTimeMask_c); //convert to 24bit
- pMsg->msgData.dataInd.timeStamp -= (temp - pPhyStruct->rxParams.timeStamp) & gPhyTimeMask_c;
-#if !(gMpmIncluded_d)
- pPhyStruct->PD_MAC_SapHandler(pMsg, pPhyStruct->currentMacInstance);
-#else
- {
- uint32_t i, bitMask = PhyPpGetPanOfRxPacket();
-
- for( i=0; i<gMpmPhyPanRegSets_c; i++ )
- {
- if( bitMask & (1 << i) )
- {
- bitMask &= ~(1 << i);
- pPhyStruct->currentMacInstance = MPM_GetMacInstanceFromRegSet(i);
-
- /* If the packet passed filtering on muliple PANs, send a copy to each one */
- if( bitMask )
- {
- pdDataToMacMessage_t *pDataIndCopy;
-
- pDataIndCopy = MEM_BufferAlloc(sizeof(pdDataToMacMessage_t) + len);
-
- if( pDataIndCopy )
- {
- FLib_MemCpy(pDataIndCopy, pMsg, sizeof(pdDataToMacMessage_t) + len);
- pPhyStruct->PD_MAC_SapHandler(pDataIndCopy, pPhyStruct->currentMacInstance);
- }
- }
- else
- {
- pPhyStruct->PD_MAC_SapHandler(pMsg, pPhyStruct->currentMacInstance);
- break;
- }
- }
- }
- }
-#endif
- }
- else
- {
- pMsg = MEM_BufferAlloc( sizeof(pdDataToMacMessage_t) );
-
- if(NULL == pMsg)
- {
- //panic(0,(uint32_t)PD_SendMessage,0,gPdDataCnf_c);
- return;
- }
-
- pMsg->msgType = gPdDataCnf_c;
-
- if( pPhyStruct->flags & gPhyFlagFramePending_c )
- {
- pPhyStruct->flags &= ~(gPhyFlagFramePending_c);
- pMsg->msgData.dataCnf.status = gPhyFramePending_c;
- }
- else
- {
- pMsg->msgData.dataCnf.status = gPhySuccess_c;
- }
-
- pPhyStruct->PD_MAC_SapHandler(pMsg, pPhyStruct->currentMacInstance);
- }
-}
-
-void MSG_InitQueue(macPhyInputQueue_t * pMacPhyQueue)
-{
- pMacPhyQueue->msgInIdx = 0;
- FLib_MemSet(&pMacPhyQueue->pMsgIn[0], 0x00, gPhyMsgQueueMax_c * sizeof(void*));
-}
-
-/* Check if a message is pending in a queue. Returns */
-/* TRUE if any pending messages, and FALSE otherwise. */
-bool_t MSG_Pending(macPhyInputQueue_t * pMacPhyQueue)
-{
- return (pMacPhyQueue->msgInIdx > 0);
-}
-
-/* Get a message from a queue. Returns NULL if no messages in queue. */
-void * MSG_DeQueue(macPhyInputQueue_t * pMacPhyQueue)
-{
- phyMessageHeader_t * pMsgIn = NULL;
- uint32_t i = 0;
-
- if(MSG_Pending(pMacPhyQueue))
- {
- pMsgIn = pMacPhyQueue->pMsgIn[0];
-
- while(i < pMacPhyQueue->msgInIdx)
- {
- pMacPhyQueue->pMsgIn[i] = pMacPhyQueue->pMsgIn[i+1];
- i++;
- }
-
- pMacPhyQueue->msgInIdx--;
- pMacPhyQueue->pMsgIn[pMacPhyQueue->msgInIdx] = NULL;
- }
-
- return pMsgIn;
-}
-
-
-void MSG_Queue(macPhyInputQueue_t * pMacPhyQueue, void * pMsgIn)
-{
- if(pMacPhyQueue->msgInIdx < gPhyMsgQueueMax_c)
- {
- pMacPhyQueue->pMsgIn[pMacPhyQueue->msgInIdx] = pMsgIn;
- pMacPhyQueue->msgInIdx++;
- }
-}
-
-void MSG_QueueHead(macPhyInputQueue_t * pMacPhyQueue, void * pMsgIn)
-{
- uint32_t i = gPhyMsgQueueMax_c - 1;
-
- if(pMacPhyQueue->msgInIdx < gPhyMsgQueueMax_c)
- {
- while(i > 0)
- {
- pMacPhyQueue->pMsgIn[i] = pMacPhyQueue->pMsgIn[i-1];
- i--;
- }
- pMacPhyQueue->pMsgIn[0] = pMsgIn;
- pMacPhyQueue->msgInIdx++;
- }
-}
-
-
--- a/FSL_IEEE_802_15_4/PHY/PhyTime.c Fri Jul 31 13:49:46 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,702 +0,0 @@
-/*!
-* Copyright (c) 2015, Freescale Semiconductor, Inc.
-* All rights reserved.
-*
-* \file PhyTime.c
-*
-* Redistribution and use in source and binary forms, with or without modification,
-* are permitted provided that the following conditions are met:
-*
-* o Redistributions of source code must retain the above copyright notice, this list
-* of conditions and the following disclaimer.
-*
-* o Redistributions in binary form must reproduce the above copyright notice, this
-* list of conditions and the following disclaimer in the documentation and/or
-* other materials provided with the distribution.
-*
-* o Neither the name of Freescale Semiconductor, Inc. nor the names of its
-* contributors may be used to endorse or promote products derived from this
-* software without specific prior written permission.
-*
-* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
-* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
-* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-*/
-
-
-/************************************************************************************
-*************************************************************************************
-* Include
-*************************************************************************************
-************************************************************************************/
-#include "EmbeddedTypes.h"
-//#include "fsl_os_abstraction.h"
-#include "MCR20Drv.h"
-#include "MCR20Reg.h"
-#include "Phy.h"
-
-#include "FunctionLib.h"
-
-/************************************************************************************
-*************************************************************************************
-* Private macros
-*************************************************************************************
-************************************************************************************/
-#define gPhyTimeMinSetupTime_c (10) /* symbols */
-
-/************************************************************************************
-*************************************************************************************
-* Public memory declarations
-*************************************************************************************
-************************************************************************************/
-void (*gpfPhyTimeNotify)(void) = NULL;
-
-/************************************************************************************
-*************************************************************************************
-* Private memory declarations
-*************************************************************************************
-************************************************************************************/
-static phyTimeEvent_t mPhyTimers[gMaxPhyTimers_c];
-static phyTimeEvent_t *pNextEvent;
-volatile uint32_t mPhySeqTimeout;
-volatile uint64_t gPhyTimerOverflow;
-
-/************************************************************************************
-*************************************************************************************
-* Private prototypes
-*************************************************************************************
-************************************************************************************/
-static void PhyTime_OverflowCB( uint32_t param );
-static phyTimeEvent_t* PhyTime_GetNextEvent( void );
-
-/************************************************************************************
-*************************************************************************************
-* Public functions
-*************************************************************************************
-************************************************************************************/
-
-/*! *********************************************************************************
-* \brief Sets the start time of a sequence
-*
-* \param[in] startTime the start time for a sequence
-*
-********************************************************************************** */
-void PhyTimeSetEventTrigger
-(
- uint32_t startTime
-)
-{
- uint8_t phyReg, phyCtrl3Reg;
-
- OSA_EnterCritical(kCriticalDisableInt);
-
- phyReg = MCR20Drv_DirectAccessSPIRead(PHY_CTRL1);
- phyReg |= cPHY_CTRL1_TMRTRIGEN; // enable autosequence start by TC2 match
- MCR20Drv_DirectAccessSPIWrite( (uint8_t) PHY_CTRL1, phyReg);
-
- phyCtrl3Reg = MCR20Drv_DirectAccessSPIRead(PHY_CTRL3);
- phyCtrl3Reg &= ~(cPHY_CTRL3_TMR2CMP_EN);// disable TMR2 compare
- MCR20Drv_DirectAccessSPIWrite( (uint8_t) PHY_CTRL3, phyCtrl3Reg);
-
- MCR20Drv_DirectAccessSPIMultiByteWrite( (uint8_t) T2PRIMECMP_LSB, (uint8_t *) &startTime, 2);
-
- phyReg = MCR20Drv_DirectAccessSPIRead(IRQSTS3);
- phyReg &= 0xF0; // do not change other IRQs status
- phyReg &= ~(cIRQSTS3_TMR2MSK); // unmask TMR2 interrupt
- phyReg |= (cIRQSTS3_TMR2IRQ); // aknowledge TMR2 IRQ
- MCR20Drv_DirectAccessSPIWrite( (uint8_t) IRQSTS3, phyReg);
-
- // TC2PRIME_EN must be enabled in PHY_CTRL4 register
- phyCtrl3Reg |= cPHY_CTRL3_TMR2CMP_EN; // enable TMR2 compare
- MCR20Drv_DirectAccessSPIWrite( (uint8_t) PHY_CTRL3, phyCtrl3Reg);
-
- OSA_ExitCritical(kCriticalDisableInt);
-}
-
-/*! *********************************************************************************
-* \brief Disable the time trigger for a sequence.
-*
-* \remarks The sequence will start asap
-*
-********************************************************************************** */
-void PhyTimeDisableEventTrigger
-(
- void
-)
-{
- uint8_t phyReg;
-
- OSA_EnterCritical(kCriticalDisableInt);
-
- phyReg = MCR20Drv_DirectAccessSPIRead(PHY_CTRL1);
- phyReg &= ~(cPHY_CTRL1_TMRTRIGEN); // disable autosequence start by TC2 match
- MCR20Drv_DirectAccessSPIWrite( (uint8_t) PHY_CTRL1, phyReg);
-
- phyReg = MCR20Drv_DirectAccessSPIRead(PHY_CTRL3);
- phyReg &= ~(cPHY_CTRL3_TMR2CMP_EN);// disable TMR2 compare
- MCR20Drv_DirectAccessSPIWrite( (uint8_t) PHY_CTRL3, phyReg);
-
- phyReg = MCR20Drv_DirectAccessSPIRead(IRQSTS3);
- phyReg &= 0xF0; // do not change other IRQs status
- phyReg |= (cIRQSTS3_TMR2MSK); // mask TMR2 interrupt
- phyReg |= (cIRQSTS3_TMR2IRQ); // aknowledge TMR2 IRQ
- MCR20Drv_DirectAccessSPIWrite( (uint8_t) IRQSTS3, phyReg);
-
- OSA_ExitCritical(kCriticalDisableInt);
-}
-
-/*! *********************************************************************************
-* \brief Sets the timeout value for a sequence
-*
-* \param[in] pEndTime the absolute time when a sequence should terminate
-*
-* \remarks If the sequence does not finish until the timeout, it will be aborted
-*
-********************************************************************************** */
-void PhyTimeSetEventTimeout
-(
- uint32_t *pEndTime
-)
-{
- uint8_t phyReg, phyCtrl3Reg;
-
-#ifdef PHY_PARAMETERS_VALIDATION
- if(NULL == pEndTime)
- {
- return;
- }
-#endif // PHY_PARAMETERS_VALIDATION
-
- OSA_EnterCritical(kCriticalDisableInt);
-
- phyCtrl3Reg = MCR20Drv_DirectAccessSPIRead(PHY_CTRL3);
- phyCtrl3Reg &= ~(cPHY_CTRL3_TMR3CMP_EN);// disable TMR3 compare
- MCR20Drv_DirectAccessSPIWrite( (uint8_t) PHY_CTRL3, phyCtrl3Reg);
-
- phyReg = MCR20Drv_DirectAccessSPIRead(PHY_CTRL4);
- phyReg |= cPHY_CTRL4_TC3TMOUT; // enable autosequence stop by TC3 match
- MCR20Drv_DirectAccessSPIWrite( (uint8_t) PHY_CTRL4, phyReg);
-
- mPhySeqTimeout = *pEndTime & 0x00FFFFFF;
- MCR20Drv_DirectAccessSPIMultiByteWrite( (uint8_t) T3CMP_LSB, (uint8_t *) pEndTime, 3);
-
- phyReg = MCR20Drv_DirectAccessSPIRead(IRQSTS3);
- phyReg &= 0xF0; // do not change IRQ status
-// phyReg &= ~(cIRQSTS3_TMR3MSK); // unmask TMR3 interrupt
- phyReg |= (cIRQSTS3_TMR3IRQ); // aknowledge TMR3 IRQ
- MCR20Drv_DirectAccessSPIWrite( (uint8_t) IRQSTS3, phyReg);
-
- phyCtrl3Reg |= cPHY_CTRL3_TMR3CMP_EN; // enable TMR3 compare
- MCR20Drv_DirectAccessSPIWrite( (uint8_t) PHY_CTRL3, phyCtrl3Reg);
-
- OSA_ExitCritical(kCriticalDisableInt);
-}
-
-/*! *********************************************************************************
-* \brief Return the timeout value for the current sequence
-*
-* \return uint32_t the timeout value
-*
-********************************************************************************** */
-uint32_t PhyTimeGetEventTimeout( void )
-{
- return mPhySeqTimeout;
-}
-
-/*! *********************************************************************************
-* \brief Disables the sequence timeout
-*
-********************************************************************************** */
-void PhyTimeDisableEventTimeout
-(
- void
-)
-{
- uint8_t phyReg;
-
- OSA_EnterCritical(kCriticalDisableInt);
-
- phyReg = MCR20Drv_DirectAccessSPIRead(PHY_CTRL4);
- phyReg &= ~(cPHY_CTRL4_TC3TMOUT); // disable autosequence stop by TC3 match
- MCR20Drv_DirectAccessSPIWrite( (uint8_t) PHY_CTRL4, phyReg);
-
- phyReg = MCR20Drv_DirectAccessSPIRead(PHY_CTRL3);
- phyReg &= ~(cPHY_CTRL3_TMR3CMP_EN);// disable TMR3 compare
- MCR20Drv_DirectAccessSPIWrite( (uint8_t) PHY_CTRL3, phyReg);
-
- phyReg = MCR20Drv_DirectAccessSPIRead(IRQSTS3);
- phyReg &= 0xF0; // do not change IRQ status
- phyReg |= cIRQSTS3_TMR3IRQ; // aknowledge TMR3 IRQ
- MCR20Drv_DirectAccessSPIWrite( (uint8_t) IRQSTS3, phyReg);
-
- OSA_ExitCritical(kCriticalDisableInt);
-}
-
-/*! *********************************************************************************
-* \brief Reads the absolute clock from the radio
-*
-* \param[out] pRetClk pointer to a location where the current clock will be stored
-*
-********************************************************************************** */
-void PhyTimeReadClock
-(
- uint32_t *pRetClk
-)
-{
-#ifdef PHY_PARAMETERS_VALIDATION
- if(NULL == pRetClk)
- {
- return;
- }
-#endif // PHY_PARAMETERS_VALIDATION
-
- OSA_EnterCritical(kCriticalDisableInt);
-
- MCR20Drv_DirectAccessSPIMultiByteRead( (uint8_t) EVENT_TMR_LSB, (uint8_t *) pRetClk, 3);
- *(((uint8_t *)pRetClk) + 3) = 0;
-
- OSA_ExitCritical(kCriticalDisableInt);
-
-}
-
-/*! *********************************************************************************
-* \brief Initialize the Event Timer
-*
-* \param[in] pAbsTime pointer to the location where the new time is stored
-*
-********************************************************************************** */
-void PhyTimeInitEventTimer
-(
- uint32_t *pAbsTime
-)
-{
- uint8_t phyCtrl4Reg;
-
-#ifdef PHY_PARAMETERS_VALIDATION
- if(NULL == pAbsTime)
- {
- return;
- }
-#endif // PHY_PARAMETERS_VALIDATION
-
- OSA_EnterCritical(kCriticalDisableInt);
-
- phyCtrl4Reg = MCR20Drv_DirectAccessSPIRead(PHY_CTRL4);
- phyCtrl4Reg |= cPHY_CTRL4_TMRLOAD; // self clearing bit
-
- MCR20Drv_DirectAccessSPIMultiByteWrite( (uint8_t) T1CMP_LSB, (uint8_t *) pAbsTime, 3);
- MCR20Drv_DirectAccessSPIWrite( (uint8_t) PHY_CTRL4, phyCtrl4Reg);
-
- OSA_ExitCritical(kCriticalDisableInt);
-}
-
-/*! *********************************************************************************
-* \brief Set TMR1 timeout value
-*
-* \param[in] pWaitTimeout the timeout value
-*
-********************************************************************************** */
-void PhyTimeSetWaitTimeout
-(
- uint32_t *pWaitTimeout
-)
-{
- uint8_t phyCtrl3Reg, irqSts3Reg;
-
- OSA_EnterCritical(kCriticalDisableInt);
-
- phyCtrl3Reg = MCR20Drv_DirectAccessSPIRead(PHY_CTRL3);
- phyCtrl3Reg &= ~(cPHY_CTRL3_TMR1CMP_EN);// disable TMR1 compare
- MCR20Drv_DirectAccessSPIWrite( (uint8_t) PHY_CTRL3, phyCtrl3Reg);
-
- MCR20Drv_DirectAccessSPIMultiByteWrite( (uint8_t) T1CMP_LSB, (uint8_t *) pWaitTimeout, 3);
-
- irqSts3Reg = MCR20Drv_DirectAccessSPIRead(IRQSTS3);
- irqSts3Reg &= ~(cIRQSTS3_TMR1MSK); // unmask TMR1 interrupt
- irqSts3Reg &= 0xF0; // do not change other IRQs status
- irqSts3Reg |= (cIRQSTS3_TMR1IRQ); // aknowledge TMR1 IRQ
- MCR20Drv_DirectAccessSPIWrite( (uint8_t) IRQSTS3, irqSts3Reg);
-
- phyCtrl3Reg |= cPHY_CTRL3_TMR1CMP_EN; // enable TMR1 compare
- MCR20Drv_DirectAccessSPIWrite( (uint8_t) PHY_CTRL3, phyCtrl3Reg);
-
- OSA_ExitCritical(kCriticalDisableInt);
-
-}
-
-/*! *********************************************************************************
-* \brief Disable the TMR1 timeout
-*
-********************************************************************************** */
-void PhyTimeDisableWaitTimeout
-(
- void
-)
-{
- uint8_t phyReg;
-
- OSA_EnterCritical(kCriticalDisableInt);
-
- phyReg = MCR20Drv_DirectAccessSPIRead(PHY_CTRL3);
- phyReg &= ~(cPHY_CTRL3_TMR1CMP_EN);// disable TMR1 compare
- MCR20Drv_DirectAccessSPIWrite( (uint8_t) PHY_CTRL3, phyReg);
-
- phyReg = MCR20Drv_DirectAccessSPIRead(IRQSTS3);
- phyReg &= 0xF0; // do not change IRQ status
- phyReg |= cIRQSTS3_TMR1IRQ; // aknowledge TMR1 IRQ
- MCR20Drv_DirectAccessSPIWrite( (uint8_t) IRQSTS3, phyReg);
-
- OSA_ExitCritical(kCriticalDisableInt);
-}
-
-/*! *********************************************************************************
-* \brief Set TMR4 timeout value
-*
-* \param[in] pWakeUpTime absolute time
-*
-********************************************************************************** */
-void PhyTimeSetWakeUpTime
-(
- uint32_t *pWakeUpTime
-)
-{
- uint8_t phyCtrl3Reg, irqSts3Reg;
-
- OSA_EnterCritical(kCriticalDisableInt);
-
- phyCtrl3Reg = MCR20Drv_DirectAccessSPIRead(PHY_CTRL3);
-// phyCtrl3Reg &= ~(cPHY_CTRL3_TMR4CMP_EN);// disable TMR4 compare
-// MCR20Drv_DirectAccessSPIWrite( (uint8_t) PHY_CTRL3, phyCtrl3Reg);
-
- MCR20Drv_DirectAccessSPIMultiByteWrite( (uint8_t) T4CMP_LSB, (uint8_t *) pWakeUpTime, 3);
-
- irqSts3Reg = MCR20Drv_DirectAccessSPIRead(IRQSTS3);
- irqSts3Reg &= ~(cIRQSTS3_TMR4MSK); // unmask TMR4 interrupt
- irqSts3Reg &= 0xF0; // do not change other IRQs status
- irqSts3Reg |= (cIRQSTS3_TMR4IRQ); // aknowledge TMR4 IRQ
- MCR20Drv_DirectAccessSPIWrite( (uint8_t) IRQSTS3, irqSts3Reg);
-
- phyCtrl3Reg |= cPHY_CTRL3_TMR4CMP_EN; // enable TMR4 compare
- MCR20Drv_DirectAccessSPIWrite( (uint8_t) PHY_CTRL3, phyCtrl3Reg);
-
- OSA_ExitCritical(kCriticalDisableInt);
-}
-
-/*! *********************************************************************************
-* \brief Check if TMR4 IRQ occured, and aknowledge it
-*
-* \return TRUE if TMR4 IRQ occured
-*
-********************************************************************************** */
-bool_t PhyTimeIsWakeUpTimeExpired
-(
- void
-)
-{
- bool_t wakeUpIrq = FALSE;
- uint8_t phyReg;
-
- OSA_EnterCritical(kCriticalDisableInt);
-
- phyReg = MCR20Drv_DirectAccessSPIRead(PHY_CTRL3);
- phyReg &= ~(cPHY_CTRL3_TMR4CMP_EN);// disable TMR4 compare
- MCR20Drv_DirectAccessSPIWrite( (uint8_t) PHY_CTRL3, phyReg);
-
- phyReg = MCR20Drv_DirectAccessSPIRead(IRQSTS3);
-
- if( (phyReg & cIRQSTS3_TMR4IRQ) == cIRQSTS3_TMR4IRQ )
- {
- wakeUpIrq = TRUE;
- }
-
- phyReg &= ~(cIRQSTS3_TMR4MSK); // unmask TMR4 interrupt
- phyReg &= 0xF0; // do not change other IRQs status
- phyReg |= (cIRQSTS3_TMR4IRQ); // aknowledge TMR2 IRQ
-
- MCR20Drv_DirectAccessSPIWrite( (uint8_t) IRQSTS3, phyReg);
-
- OSA_ExitCritical(kCriticalDisableInt);
-
- return wakeUpIrq;
-}
-
-
-/*! *********************************************************************************
-* \brief PHY Timer Interrupt Service Routine
-*
-********************************************************************************** */
-void PhyTime_ISR(void)
-{
- if( pNextEvent->callback == PhyTime_OverflowCB )
- {
- gPhyTimerOverflow++;
- }
-
- if( gpfPhyTimeNotify )
- {
- gpfPhyTimeNotify();
- }
- else
- {
- PhyTime_RunCallback();
- PhyTime_Maintenance();
- }
-}
-
-/*! *********************************************************************************
-* \brief Initialize the PHY Timer module
-*
-* \return phyTimeStatus_t
-*
-********************************************************************************** */
-phyTimeStatus_t PhyTime_TimerInit( void (*cb)(void) )
-{
- if( gpfPhyTimeNotify )
- return gPhyTimeError_c;
-
- gpfPhyTimeNotify = cb;
- gPhyTimerOverflow = 0;
- FLib_MemSet( mPhyTimers, 0, sizeof(mPhyTimers) );
-
- /* Schedule Overflow Calback */
- pNextEvent = &mPhyTimers[0];
- pNextEvent->callback = PhyTime_OverflowCB;
- pNextEvent->timestamp = (gPhyTimerOverflow+1) << gPhyTimeShift_c;
- PhyTimeSetWaitTimeout( (uint32_t*)&pNextEvent->timestamp );
-
- return gPhyTimeOk_c;
-}
-
-/*! *********************************************************************************
-* \brief Returns a 64bit timestamp value to be used by the MAC Layer
-*
-* \return phyTimeTimestamp_t PHY timestamp
-*
-********************************************************************************** */
-phyTimeTimestamp_t PhyTime_GetTimestamp(void)
-{
- phyTimeTimestamp_t time = 0;
-
- OSA_EnterCritical(kCriticalDisableInt);
- PhyTimeReadClock( (uint32_t*)&time );
- time |= (gPhyTimerOverflow << gPhyTimeShift_c);
- OSA_ExitCritical(kCriticalDisableInt);
-
- return time;
-}
-
-/*! *********************************************************************************
-* \brief Schedules an event
-*
-* \param[in] pEvent event to be scheduled
-*
-* \return phyTimeTimerId_t the id of the alocated timer
-*
-********************************************************************************** */
-phyTimeTimerId_t PhyTime_ScheduleEvent( phyTimeEvent_t *pEvent )
-{
- phyTimeTimerId_t tmr;
-
- /* Parameter validation */
- if( NULL == pEvent->callback )
- {
- return gInvalidTimerId_c;
- }
-
- /* Search for a free slot (slot 0 is reserved for the Overflow calback) */
- OSA_EnterCritical(kCriticalDisableInt);
- for( tmr=1; tmr<gMaxPhyTimers_c; tmr++ )
- {
- if( mPhyTimers[tmr].callback == NULL )
- {
- mPhyTimers[tmr] = *pEvent;
- break;
- }
- }
- OSA_ExitCritical(kCriticalDisableInt);
-
- if( tmr >= gMaxPhyTimers_c )
- return gInvalidTimerId_c;
-
- /* Program the next event */
- if((NULL == pNextEvent) ||
- (NULL != pNextEvent && mPhyTimers[tmr].timestamp < pNextEvent->timestamp))
- {
- PhyTime_Maintenance();
- }
-
- return tmr;
-}
-
-/*! *********************************************************************************
-* \brief Cancel an event
-*
-* \param[in] timerId the Id of the timer
-*
-* \return phyTimeStatus_t
-*
-********************************************************************************** */
-phyTimeStatus_t PhyTime_CancelEvent( phyTimeTimerId_t timerId )
-{
- if( (timerId == 0) || (timerId >= gMaxPhyTimers_c) || (NULL == mPhyTimers[timerId].callback) )
- {
- return gPhyTimeNotFound_c;
- }
-
- OSA_EnterCritical(kCriticalDisableInt);
- if( pNextEvent == &mPhyTimers[timerId] )
- pNextEvent = NULL;
-
- mPhyTimers[timerId].callback = NULL;
- OSA_ExitCritical(kCriticalDisableInt);
-
- return gPhyTimeOk_c;
-}
-
-/*! *********************************************************************************
-* \brief Cancel all event with the specified paameter
-*
-* \param[in] param event parameter
-*
-* \return phyTimeStatus_t
-*
-********************************************************************************** */
-phyTimeStatus_t PhyTime_CancelEventsWithParam ( uint32_t param )
-{
- uint32_t i;
- phyTimeStatus_t status = gPhyTimeNotFound_c;
-
- OSA_EnterCritical(kCriticalDisableInt);
- for( i=1; i<gMaxPhyTimers_c; i++ )
- {
- if( mPhyTimers[i].callback && (param == mPhyTimers[i].parameter) )
- {
- status = gPhyTimeOk_c;
- mPhyTimers[i].callback = NULL;
- if( pNextEvent == &mPhyTimers[i] )
- pNextEvent = NULL;
- }
- }
- OSA_ExitCritical(kCriticalDisableInt);
-
- return status;
-}
-
-/*! *********************************************************************************
-* \brief Run the callback for the recently expired event
-*
-********************************************************************************** */
-void PhyTime_RunCallback( void )
-{
- uint32_t param;
- phyTimeCallback_t cb;
-
- if( pNextEvent )
- {
- OSA_EnterCritical(kCriticalDisableInt);
-
- param = pNextEvent->parameter;
- cb = pNextEvent->callback;
- pNextEvent->callback = NULL;
- pNextEvent = NULL;
-
- OSA_ExitCritical(kCriticalDisableInt);
-
- cb(param);
- }
-}
-
-/*! *********************************************************************************
-* \brief Expire events too close to be scheduled.
-* Program the next event
-*
-********************************************************************************** */
-void PhyTime_Maintenance( void )
-{
- phyTimeTimestamp_t currentTime;
- phyTimeEvent_t *pEv;
-
- PhyTimeDisableWaitTimeout();
-
- while(1)
- {
- OSA_EnterCritical(kCriticalDisableInt);
-
- pEv = PhyTime_GetNextEvent();
- currentTime = PhyTime_GetTimestamp();
-
- /* Program next event if exists */
- if( pEv )
- {
- pNextEvent = pEv;
-
- if( pEv->timestamp > (currentTime + gPhyTimeMinSetupTime_c) )
- {
- PhyTimeSetWaitTimeout( (uint32_t*)&pEv->timestamp );
- pEv = NULL;
- }
- }
-
- OSA_ExitCritical(kCriticalDisableInt);
-
- if( !pEv )
- break;
-
- PhyTime_RunCallback();
- }
-
-}
-
-
-/*! *********************************************************************************
-* \brief Timer Overflow callback
-*
-* \param[in] param
-*
-********************************************************************************** */
-static void PhyTime_OverflowCB( uint32_t param )
-{
- (void)param;
-
- /* Reprogram the next overflow callback */
- mPhyTimers[0].callback = PhyTime_OverflowCB;
- mPhyTimers[0].timestamp = (gPhyTimerOverflow+1) << 24;
-}
-
-/*! *********************************************************************************
-* \brief Search for the next event to be scheduled
-*
-* \return phyTimeEvent_t pointer to the next event to be scheduled
-*
-********************************************************************************** */
-static phyTimeEvent_t* PhyTime_GetNextEvent( void )
-{
- phyTimeEvent_t *pEv = NULL;
- uint32_t i;
-
- /* Search for the next event to be serviced */
- for( i=0; i<gMaxPhyTimers_c; i++ )
- {
- if( NULL != mPhyTimers[i].callback )
- {
- if( NULL == pEv )
- {
- pEv = &mPhyTimers[i];
- }
- /* Check which event expires first */
- else if( mPhyTimers[i].timestamp < pEv->timestamp )
- {
- pEv = &mPhyTimers[i];
- }
- }
- }
-
- return pEv;
-}
--- a/FSL_IEEE_802_15_4/PHY/PhyTypes.h Fri Jul 31 13:49:46 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,363 +0,0 @@
-/*!
-* Copyright (c) 2015, Freescale Semiconductor, Inc.
-* All rights reserved.
-*
-* \file PhyTypes.h
-*
-* Redistribution and use in source and binary forms, with or without modification,
-* are permitted provided that the following conditions are met:
-*
-* o Redistributions of source code must retain the above copyright notice, this list
-* of conditions and the following disclaimer.
-*
-* o Redistributions in binary form must reproduce the above copyright notice, this
-* list of conditions and the following disclaimer in the documentation and/or
-* other materials provided with the distribution.
-*
-* o Neither the name of Freescale Semiconductor, Inc. nor the names of its
-* contributors may be used to endorse or promote products derived from this
-* software without specific prior written permission.
-*
-* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
-* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
-* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-*/
-
-#ifndef _PHY_TYPES_H
-#define _PHY_TYPES_H
-
-
-/************************************************************************************
-*************************************************************************************
-* Include
-*************************************************************************************
-************************************************************************************/
-
-/************************************************************************************
-*************************************************************************************
-* Public macros
-*************************************************************************************
-************************************************************************************/
-
-/* WARNING!!! Only one frequency can be declared at a time! */
-#ifdef gPHY_802_15_4g_d
- #ifndef gFreqBand_470__510MHz_d
- #define gFreqBand_470__510MHz_d 0
- #endif
-
- #ifndef gFreqBand_779__787MHz_d
- #define gFreqBand_779__787MHz_d 0
- #endif
-
- #ifndef gFreqBand_863__870MHz_d
- #define gFreqBand_863__870MHz_d 0
- #endif
-
- #ifndef gFreqBand_902__928MHz_d
- #define gFreqBand_902__928MHz_d 0
- #endif
-
- #ifndef gFreqBand_920__928MHz_d
- #define gFreqBand_920__928MHz_d 1
- #endif
-
- #ifndef gFreqBand_863__876MHz_d
- #define gFreqBand_863__876MHz_d 0
- #endif
-
- #ifndef gFreqBand_915__921MHz_d
- #define gFreqBand_915__921MHz_d 0
- #endif
-
- #if gFreqBand_470__510MHz_d
- #define gFreqBandId_d gFreq470__510MHz_c
-
- #elif gFreqBand_779__787MHz_d
- #define gFreqBandId_d gFreq779__787MHz_c
-
- #elif gFreqBand_863__870MHz_d
- #define gFreqBandId_d gFreq863__870MHz_c
-
- #elif gFreqBand_902__928MHz_d
- #define gFreqBandId_d gFreq902__928MHz_c
-
- #elif gFreqBand_920__928MHz_d
- #define gFreqBandId_d gFreq920__928MHz_c
-
- #elif gFreqBand_863__876MHz_d
- #define gFreqBandId_d gFreq863__876MHz_c
-
- #elif gFreqBand_915__921MHz_d
- #define gFreqBandId_d gFreq915__921MHz_c
-
- #else
- #error "No frequency band declared!!!"
- #endif
-#endif // gPHY_802_15_4g_d
-
-/// \note MUST REMAIN UNCHANGED:
-#ifdef gPHY_802_15_4g_d
- #define gPhySymbolsPerOctet_c 8
- #define gPhyMRFSKPHRLength_c 2 /* [bytes] */
-#if (gFreqBand_863__876MHz_d || gFreqBand_915__921MHz_d)
- #define gPhyFSKPreambleLength_c 8 /* [bytes] */
-#else
- #define gPhyFSKPreambleLength_c 16 /* [bytes] */
-#endif
- #define gPhyMRFSKSFDLength_c 2 /* [bytes] */
- #define gMinPHYPacketSize_c 5
- #define gMaxPHYPacketSize_c 254 /* maximum number of bytes that the PHY can transmit or receive */
- #define gPhyFCSSize_c 2 /* [bytes] */
- #define gCCADurationDefault_c 13 /* [symbols] */
- #define gPhySHRDuration_c (gPhySymbolsPerOctet_c * (gPhyFSKPreambleLength_c + gPhyMRFSKSFDLength_c)) /* [symbols] */
- #define gPhyMaxFrameDuration_c (gPhySHRDuration_c + (gPhyMRFSKPHRLength_c + gMaxPHYPacketSize_c) * gPhySymbolsPerOctet_c) /* [symbols] 802.15.4g page 48 formula */
-#else
- #define gCCATime_c 8 /* [symbols] */
- #define gPhyTurnaroundTime_c 12 /* [symbols] RX-to-TX or TX-to-RX maximum turnaround time (in symbol periods)*/
- #define gMinPHYPacketSize_c 5
- #define gMaxPHYPacketSize_c (127) /* maximum number of bytes that the PHY can transmit or receive */
- #define gPhySHRDuration_c (10) /* [symbols] */
- #define gPhySymbolsPerOctet_c (2)
- #define gPhyFCSSize_c (2) /* [bytes] */
- #define gPhyMaxFrameDuration_c (gPhySHRDuration_c + (gMaxPHYPacketSize_c + 1) * gPhySymbolsPerOctet_c)
- #define gUnitBackoffPeriod_c 20 /* [symbols] */
-#endif // gPHY_802_15_4g_d
-
-// Phy flags
-#define gPhyFlagRxOnWhenIdle_c (1 << 0)
-#define gPhyFlagFramePending_c (1 << 1)
-#define gPhyFlagIdleRx_c (1 << 2)
-#define gPhyFlagDeferTx_c (1 << 3)
-
-#ifdef gPHY_802_15_4g_d
-#ifndef gAfcRxTimeout_c
-#define gAfcRxTimeout_c gPhySHRDuration_c /* [symbols] */
-#endif
-#endif
-
-/************************************************************************************
-*************************************************************************************
-* Public prototypes
-*************************************************************************************
-************************************************************************************/
-
-/************************************************************************************
-*************************************************************************************
-* Public type definitions
-*************************************************************************************
-************************************************************************************/
-typedef enum
-{
- gPhyChannelBusy_c = 0x00, /*The CCA attempt has detected a busy channel.*/
- gPhyBusyRx_c = 0x01, /*The transceiver is asked to change its state while receiving.*/
- gPhyBusyTx_c = 0x02, /*The transceiver is asked to change its state while transmitting.*/
- gPhyChannelIdle_c = 0x04, /*The CCA attempt has detected an idle channel.*/
- gPhyInvalidParameter_c = 0x05, /*A SET request was issued with a parameter in the primitive that is out of the valid range.*/
- gPhyRxOn_c = 0x06, /*The transceiver is in the receiver enabled state.*/
- gPhySuccess_c = 0x07, /*A SET/GET, an ED operation, a data request, an indirect queue insert, or a transceiver state change was successful.*/
- gPhyTRxOff_c = 0x08, /*The transceiver is in the transceiver disabled state.*/
- gPhyTxOn_c = 0x09, /*The transceiver is in the transmitter enabled state.*/
- gPhyUnsupportedAttribute_c = 0x0a, /*A SET/GET request was issued with the identifier of an attribute that is not supported.*/
- gPhyReadOnly_c = 0x0b, /*A SET request was issued with the identifier of an attribute that is read-only.*/
- gPhyIndexUsed_c = 0x11, /*The indirect queue insert operation has detected an used index.*/
- gPhyNoAck_c = 0x14, /*No ACK was received for the last transmission.*/
- gPhyFramePending_c = 0x15, /*The ACK of a Data Request frame indicates a pending frame in the coordinator�s indirect TX queue.*/
- gPhyBusy_c = 0xF1, //
- gPhyInvalidPrimitive_c = 0xF2 //
-}phyStatus_t;
-
-typedef enum
-{
- gPhySlottedMode_c = 0x0c,
- gPhyUnslottedMode_c = 0x0d
-}phySlottedMode_t;
-
-typedef enum
-{
- gPhyEnergyDetectMode_c = 0x00,
- gPhyCCAMode1_c = 0x01,
- gPhyCCAMode2_c = 0x02,
- gPhyCCAMode3_c = 0x03,
- gPhyNoCCABeforeTx_c = 0x04
-}phyCCAType_t;
-
-typedef enum
-{
- gPhyContCcaEnabled = 0x00,
- gPhyContCcaDisabled
-}phyContCCAMode_t;
-
-typedef enum
-{
- gPhyForceTRxOff_c = 0x03, /*The transceiver is to be switched off immediately.*/
- gPhySetRxOn_c = 0x12, /*The transceiver is to be configured into the receiver enabled state.*/
- gPhySetTRxOff_c = 0x13, /*The transceiver is to be configured into the transceiver disabled state.*/
-}phyState_t;
-
-typedef enum
-{
- gPhyRxAckRqd_c = 0x00, /*A receive Ack frame is expected to follow the transmit frame (non-Ack frames are rejected)*/
- gPhyNoAckRqd_c = 0x01, /*An ordinary receive frame (any type of frame) follows the transmit frame*/
-#ifdef gPHY_802_15_4g_d
- gPhyEnhancedAckReq = 0x02
-#endif // gPHY_802_15_4g_d
-}phyAckRequired_t;
-
-typedef enum
-{
- gPhyPibCurrentChannel_c = 0x00, /*The channel currently used.*/
- gPhyPibCurrentPage_c = 0x01, /*The channel page currently used.*/
- gPhyPibTransmitPower_c = 0x02, /*The power used for TX operations.*/
- gPhyPibLongAddress_c = 0x03, /*The MAC long address to be used by the PHY�s source address matching feature.*/
- gPhyPibShortAddress_c = 0x04, /*The MAC short address to be used by the PHY�s source address matching feature.*/
- gPhyPibPanId_c = 0x05, /*The MAC PAN ID to be used by the PHY�s source address matching feature.*/
- gPhyPibPanCoordinator_c = 0x06, /*Indicates if the device is a PAN coordinator or not.*/
- gPhyPibSrcAddrEnable_c = 0x07, /*Enables or disables the PHY�s source address matching feature.*/
- gPhyPibPromiscuousMode_c = 0x08, /*Selects between normal, promiscuous and active promiscuous mode.*/
- gPhyPibAutoAckEnable_c = 0x09, /*Enables or disables automatic transmission of ACK frames.*/
- gPhyPibFrameVersion_c = 0x0A, /*Used in checking for allowed frame versions (0x00 - any version accepted, 0x01 - accept Frame Version 0 packets (2003 compliant), 0x02 - accept Frame Version 1 packets (2006 compliant), 0x03 - accept Frame Version 0 and 1 packets).*/
- gPhyPibFrameEnable_c = 0x0B, /*Used for enabling or disabling reception of MAC frames.*/
- gPhyPibAckFramePending_c = 0x0C, /*Used to copy its contents to the outgoing ACK frame's Frame Pending field as a response to a received Data Request frame with Source Address Matching disabled.*/
- gPhyPibRxOnWhenIdle = 0x0D, /*Enable RX when the radio is IDLE*/
- gPhyPibFrameWaitTime_c = 0x0E, /*The number of symbols the Rx should be on after receiving an ACK with FP=1 */
- gPhyPibDeferTxIfRxBusy_c = 0x0F,
-#ifdef gPHY_802_15_4g_d
- gPhyPibPhyModeSupported_c = 0x10,
- gPhyPibCurrentMode_c = 0x11,
- gPhyPibFSKPreambleRepetitions_c = 0x12,
- gPhyPibFSKScramblePSDU_c = 0x13,
- gPhyPibCCADuration_c = 0x14,
- gPhyPibCSLRxEnabled_c = 0x15,
- gPhyPibCSLTxEnabled_c = 0x16,
- gPhyPibFreqBandId_c = 0x17,
- gPhyPibAckWaitDuration_c = 0x18
-#endif // gPHY_802_15_4g_d
-}phyPibId_t;
-
-typedef struct phyFlags_tag
-{
- union{
- uint32_t mask;
- struct{
- uint32_t rxOnWhenIdle :1;
- uint32_t rxFramePending :1;
- uint32_t idleRx :1;
-#ifdef gPHY_802_15_4g_d
- uint32_t slotted :1;
- uint32_t ccaBfrTX :1;
- uint32_t rxAckRqd :1;
- uint32_t autoAck :1;
- uint32_t panCordntr :1;
- uint32_t promiscuous :1;
- uint32_t activePromiscuous :1;
- uint32_t cslRxEnabled :1;
- uint32_t cslTxEnabled :1;
- uint32_t rxEnhAckRqd :1;
- uint32_t ccaEdScan :1; // set for a CCA or ED request
- uint32_t ccaComplete :1; // set when a CCA period is over
- uint32_t waitTurnaroundComplete :1; // set when a Auto ACK send or receive sequence started
- uint32_t reserved :16;
-#else
- uint32_t phyState :3;
- uint32_t reserved :26;
-#endif // gPHY_802_15_4g_d
- };
- };
-}phyFlags_t;
-
-#define gInvalidTimerId_c (gMaxPhyTimers_c)
-
-#ifdef gPHY_802_15_4g_d
-#define gPhyTimeShift_c (16) // 16bit hw timer
-#define gPhyTimeMask_c (0x000000000000FFFF)
-#else
-#define gPhyTimeShift_c (24) // 24bit hw timer
-#define gPhyTimeMask_c (0x00FFFFFF)
-#endif
-
-typedef uint8_t phyTimeTimerId_t;
-typedef uint64_t phyTimeTimestamp_t;
-
-#ifdef gPHY_802_15_4g_d
-typedef uint64_t phyTime_t;
-#else
-typedef uint32_t phyTime_t;
-#endif
-
-typedef void (*phyTimeCallback_t) ( uint32_t param );
-
-typedef enum
-{
- gPhyTimeOk_c = 0x00,
- gPhyTimeAlreadyPassed_c = 0x01,
- gPhyTimeTooClose_c = 0x02,
- gPhyTimeTooMany_c = 0x03,
- gPhyTimeInvalidParameter_c = 0x04,
- gPhyTimeNotFound_c = 0x05,
- gPhyTimeError_c = 0x06
-}phyTimeStatus_t;
-
-#ifdef gPHY_802_15_4g_d
-typedef struct phyPHR_tag
-{
- union{
- uint16_t mask;
- uint8_t byteAccess[2];
- struct{
- uint8_t modeSwitch :1;
- uint8_t reserved :2;
- uint8_t fcsType :1;
- uint8_t dataWhitening :1;
- uint8_t frameLengthRsvd :3; // Max psdu 254
- uint8_t frameLength;
- };
- };
-}phyPHR_t;
-
-typedef enum{
- gPhyMode1_c = 0x00,
- gPhyMode2_c = 0x01,
- gPhyMode3_c = 0x02,
- gPhyMode4_c = 0x03,
- gPhyMode1ARIB_c = 0x04,
- gPhyMode2ARIB_c = 0x05,
- gPhyMode3ARIB_c = 0x06,
-}phyMode_t;
-
-//802.15.4g MAC sub-1GHz frequency bands
-typedef enum{
- gFreq470__510MHz_c = 0x02, // 470-510 (China)
- gFreq779__787MHz_c = 0x03, // 779-787 (China)
- gFreq863__870MHz_c = 0x04, // 863-870 (Europe)
- gFreq902__928MHz_c = 0x07, // 902-928 (U.S.)
- gFreq920__928MHz_c = 0x09, // 920-928 (Japan) - Includes ARIB modes
- gFreq863__876MHz_c = 0x0E, // 863-876 (UK) custom mode
- gFreq915__921MHz_c = 0x0F, // 915-921 (UK) custom mode
-}phyFreqBand_t;
-
-#ifndef gPhyModeDefault_d
-#define gPhyModeDefault_d gPhyMode1_c
-#endif
-
-#endif // gPHY_802_15_4g_d
-
-/************************************************************************************
-*************************************************************************************
-* Public memory declarations
-*************************************************************************************
-************************************************************************************/
-
-/************************************************************************************
-*************************************************************************************
-* Public functions
-*************************************************************************************
-************************************************************************************/
-
-#endif /* _PHY_TYPES_H */
--- a/FSL_IEEE_802_15_4/SMAC/SMAC.cpp Fri Jul 31 13:49:46 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,1416 +0,0 @@
-/**************************************************************************************************
-* SMAC implementation.
-*
-* Freescale Semiconductor Inc.
-* (c) Copyright 2004-2014 Freescale Semiconductor, Inc.
-* ALL RIGHTS RESERVED.
-*
-***************************************************************************************************
-*
-* THIS SOFTWARE IS PROVIDED BY FREESCALE "AS IS" AND ANY EXPRESSED OR
-* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
-* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
-* IN NO EVENT SHALL FREESCALE OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
-* INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
-* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
-* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
-* THE POSSIBILITY OF SUCH DAMAGE.
-*
-***********************************************************************************************//*!
-**************************************************************************************************/
-#include "SMAC.h"
-#include "PhyInterface.h"
-#include "EmbeddedTypes.h"
-
-#include "SMAC_Config.h"
-
-#include "MemManager.h"
-#include "FunctionLib.h"
-#if 0
-#include "panic.h"
-#endif
-
-#include "cmsis_os.h"
-#include "rtos.h"
-
-/************************************************************************************
-*************************************************************************************
-* Public memory declarations
-*************************************************************************************
-************************************************************************************/
-uint8_t gTotalChannels;
-
-/************************************************************************************
-*************************************************************************************
-* Private memory declarations
-*************************************************************************************
-************************************************************************************/
-static smacStates_t smacState;
-/*volatile*/ static prssPacketPtr_t smacProccesPacketPtr;
-static phyRxParams_t smacLastDataRxParams;
-#if defined (gPHY_802_15_4g_d)
-static smacPacket_t smacPacketConfig;
-#endif
-static macToPdDataMessage_t * gSmacDataMessage;
-static macToPlmeMessage_t * gSmacMlmeMessage;
-
-static uint16_t u16PanID;
-static uint16_t u16ShortSrcAddress;
-
-static uint8_t u8AckRetryCounter = 0;
-static uint8_t u8CCARetryCounter = 0;
-
-static uint8_t mSmacInitialized;
-static uint8_t mSmacTimeoutAsked;
-static uint8_t u8BackoffTimerId;
-static txContextConfig_t txConfigurator;
-static uint8_t u8SmacSeqNo;
-//Sap Handlers Called by PHY
-phyStatus_t PD_SMAC_SapHandler(void* pMsg, instanceId_t smacInstanceId);
-phyStatus_t PLME_SMAC_SapHandler(void* pMsg, instanceId_t smacInstanceId);
-
-/************************************************************************************
-*************************************************************************************
-* Private functions
-*************************************************************************************
-************************************************************************************/
-static bool_t SMACPacketCheck(pdDataToMacMessage_t* pMsgFromPhy);
-static void BackoffTimeElapsed(void const *arg);
-
-osTimerDef (SmacTimer, BackoffTimeElapsed);
-/************************************************************************************
-*************************************************************************************
-* Interface functions
-*************************************************************************************
-************************************************************************************/
-uint8_t TMR_AllocateTimer
-(
- void
-)
-{
- //RtosTimer smac_timer(u8BackoffTimerId, osTimerOnce , NULL);
- return 0;
-}
-
-uint8_t TMR_StartSingleShotTimer
-(
- uint8_t timerID,
- uint32_t timeInMilliseconds,
- void (*pfTimerCallBack)(const void *),
- void *param
-)
-{
- //RtosTimer smac_timer(pfTimerCallBack, osTimerOnce , NULL);
-
- osTimerId id = osTimerCreate (osTimer(SmacTimer), osTimerOnce, NULL);
- osTimerStart (id, timeInMilliseconds);
- return 0;
-}
-
-
-/***********************************************************************************/
-/******************************** SMAC Data primitives *****************************/
-/***********************************************************************************/
-
-/************************************************************************************
-* MCPSDataRequest
-*
-* This data primitive is used to send an over the air packet. This is an asynchronous
-* function, it means it asks SMAC to transmit one OTA packet, but when the function
-* returns it is not sent already.
-*
-************************************************************************************/
-smacErrors_t MCPSDataRequest
-(
-txPacket_t *psTxPacket //IN:Pointer to the packet to be transmitted
-)
-{
- macToPdDataMessage_t *pMsg;
- phyStatus_t u8PhyRes = gPhySuccess_c;
-
-#if(TRUE == smacInitializationValidation_d)
- if(FALSE == mSmacInitialized)
- {
- return gErrorNoValidCondition_c;
- }
-#endif /* TRUE == smacInitializationValidation_d */
-
-#if(TRUE == smacParametersValidation_d)
- uint8_t u8MaxLen=0;
-
- u8MaxLen = gMaxSmacSDULength_c;
-
- if((NULL == psTxPacket) || (u8MaxLen < psTxPacket->u8DataLength))
- {
- return gErrorOutOfRange_c;
- }
-#endif /* TRUE == smacParametersValidation_d */
-
- if(mSmacStateIdle_c != smacState)
- {
- return gErrorBusy_c;
- }
-
- u8SmacSeqNo++;
- u8AckRetryCounter = 0;
- u8CCARetryCounter = 0;
-
- psTxPacket->u8DataLength = psTxPacket->u8DataLength + gSmacHeaderBytes_c;
-
- pMsg = (macToPdDataMessage_t*)MEM_BufferAlloc( sizeof(macToPdDataMessage_t) +
- psTxPacket->u8DataLength);
- if(pMsg == NULL )
- {
- return gErrorNoResourcesAvailable_c;
- }
- /* Fill with Phy related data */
- pMsg->macInstance = smacInstance;
- pMsg->msgType = gPdDataReq_c;
- //SMAC doesn't use slotted mode
- pMsg->msgData.dataReq.slottedTx = gPhyUnslottedMode_c;
- //start transmission immediately
- pMsg->msgData.dataReq.startTime = gPhySeqStartAsap_c;
-#ifdef gPHY_802_15_4g_d
- //for sub-Gig phy handles duration in case of ACK
- pMsg->msgData.dataReq.txDuration = 0xFFFFFFFF;
-#else
- if(txConfigurator.autoAck &&
- psTxPacket->smacHeader.destAddr != 0xFFFF &&
- psTxPacket->smacHeader.panId != 0xFFFF)
- {
- //Turn@ + phy payload(symbols)+ Turn@ + ACK
- pMsg->msgData.dataReq.txDuration = 12 + (6 + psTxPacket->u8DataLength + 2)*2 + 12 + 42;
- if(txConfigurator.ccaBeforeTx)
- {
- pMsg->msgData.dataReq.txDuration += 0x08; //CCA Duration: 8 symbols
- }
- }
- else
- {
- pMsg->msgData.dataReq.txDuration = 0xFFFFFFFF;
- }
-#endif
- pMsg->msgData.dataReq.psduLength = psTxPacket->u8DataLength;
- pMsg->msgData.dataReq.pPsdu = (uint8_t*)&pMsg->msgData.dataReq.pPsdu +
- sizeof(pMsg->msgData.dataReq.pPsdu);
-
- FLib_MemCpy(pMsg->msgData.dataReq.pPsdu, &(psTxPacket->smacHeader), gSmacHeaderBytes_c);
- FLib_MemCpy(pMsg->msgData.dataReq.pPsdu + gSmacHeaderBytes_c,
- &(psTxPacket->smacPdu),
- psTxPacket->u8DataLength - gSmacHeaderBytes_c);
-
- if(txConfigurator.ccaBeforeTx)
- {
- //tell phy to perform CCA before transmission
- pMsg->msgData.dataReq.CCABeforeTx = gPhyCCAMode1_c;
- }
- else
- {
- pMsg->msgData.dataReq.CCABeforeTx = gPhyNoCCABeforeTx_c;
- }
-
- if(txConfigurator.autoAck &&
- psTxPacket->smacHeader.destAddr != 0xFFFF &&
- psTxPacket->smacHeader.panId != 0xFFFF)
- {
- //set frame control option: ACK.
- pMsg->msgData.dataReq.pPsdu[0] |= FRAME_CTRL_ACK_FIELD_SET;
- pMsg->msgData.dataReq.ackRequired = gPhyRxAckRqd_c;
- }
- else
- {
- pMsg->msgData.dataReq.ackRequired = gPhyNoAckRqd_c;
- }
- //set sequence number;
- pMsg->msgData.dataReq.pPsdu[2] = u8SmacSeqNo;
- gSmacDataMessage = pMsg; //Store pointer for freeing later
- u8PhyRes = MAC_PD_SapHandler(pMsg, 0);
-
- psTxPacket->u8DataLength -= gSmacHeaderBytes_c;
-
- if(u8PhyRes == gPhySuccess_c)
- {
- smacState= mSmacStateTransmitting_c;
- return gErrorNoError_c;
- }
- else
- {
- MEM_BufferFree(gSmacDataMessage);
- gSmacDataMessage = NULL;
- return gErrorNoResourcesAvailable_c;
- }
-}
-
-/************************************************************************************
-* MLMEConfigureTxContext
-*
-* This management primitive is used to configure the conditions under which SMAC will
-* perform a transmission OTA.
-*
-************************************************************************************/
-smacErrors_t MLMEConfigureTxContext(txContextConfig_t* pTxConfig)
-{
- if( (pTxConfig->autoAck == FALSE && pTxConfig->retryCountAckFail !=0) ||
- (pTxConfig->ccaBeforeTx == FALSE && pTxConfig->retryCountCCAFail !=0) )
- {
- return gErrorNoValidCondition_c;
- }
- if( pTxConfig->retryCountAckFail > gMaxRetriesAllowed_c ||
- pTxConfig->retryCountCCAFail > gMaxRetriesAllowed_c)
- {
- return gErrorOutOfRange_c;
- }
- txConfigurator.autoAck = pTxConfig->autoAck;
- txConfigurator.ccaBeforeTx = pTxConfig->ccaBeforeTx;
- txConfigurator.retryCountAckFail = pTxConfig->retryCountAckFail;
- txConfigurator.retryCountCCAFail = pTxConfig->retryCountCCAFail;
-
- return gErrorNoError_c;
-}
-
-/************************************************************************************
-* MLMERXEnableRequest
-*
-* Function used to place the radio into receive mode
-*
-************************************************************************************/
-smacErrors_t MLMERXEnableRequest
-(
-rxPacket_t *gsRxPacket, //OUT: Pointer to the structure where the reception results
-// will be stored.
-smacTime_t stTimeout //IN: 64-bit timeout value, absolute value in symbols
-)
-{
-
- uint8_t u8PhyRes = 0;
- macToPlmeMessage_t lMsg;
-
-#if(TRUE == smacParametersValidation_d)
- uint8_t u8MaxLen=0;
-
- u8MaxLen = gMaxSmacSDULength_c;
-#endif /* TRUE == smacParametersValidation_d */
-
-#if(TRUE == smacParametersValidation_d)
- if((NULL == gsRxPacket) || (u8MaxLen < gsRxPacket->u8MaxDataLength))
- {
- return gErrorOutOfRange_c;
- }
-#endif /* TRUE == smacParametersValidation_d */
-
-#if(TRUE == smacInitializationValidation_d)
- if(FALSE == mSmacInitialized)
- {
- return gErrorNoValidCondition_c;
- }
-#endif /* TRUE == smacInitializationValidation_d */
-
- if(mSmacStateIdle_c != smacState)
- {
- return gErrorBusy_c;
- }
- if(stTimeout)
- {
- lMsg.msgType = gPlmeSetTRxStateReq_c;
- lMsg.msgData.setTRxStateReq.startTime = gPhySeqStartAsap_c;
- lMsg.macInstance = smacInstance;
- lMsg.msgData.setTRxStateReq.state = gPhySetRxOn_c;
- mSmacTimeoutAsked = TRUE;
- lMsg.msgData.setTRxStateReq.rxDuration = stTimeout;
- }
- else
- {
- lMsg.msgType = gPlmeSetReq_c;
- lMsg.msgData.setReq.PibAttribute = gPhyPibRxOnWhenIdle;
- lMsg.msgData.setReq.PibAttributeValue = (uint64_t)1;
- }
- u8PhyRes = MAC_PLME_SapHandler(&lMsg, 0);
- if(u8PhyRes == gPhySuccess_c)
- {
- gsRxPacket->rxStatus = rxProcessingReceptionStatus_c;
- smacProccesPacketPtr.smacRxPacketPointer = gsRxPacket;
-
- smacState= mSmacStateReceiving_c;
- return gErrorNoError_c;
- }
- else
- {
- return gErrorNoResourcesAvailable_c;
- }
-}
-#if defined (gPHY_802_15_4g_d)
-/************************************************************************************
-* MLMESetPreambleLength
-*
-* Function used to change the preamble size in the OTA Packet
-*
-************************************************************************************/
-smacErrors_t MLMESetPreambleLength
-(
-uint16_t u16preambleLength
-)
-{
-#if(TRUE == smacInitializationValidation_d)
- if(FALSE == mSmacInitialized)
- {
- return gErrorNoValidCondition_c;
- }
-#endif /* TRUE == smacInitializationValidation_d */
-
- if(mSmacStateIdle_c != smacState)
- {
- return gErrorBusy_c;
- }
- smacPacketConfig.u16PreambleLength = u16preambleLength;
- gPhyPib.mPIBphyFSKPreambleRepetitions = u16preambleLength;
- PhyPib_RFUpdatePreambleLength();
-
- return gErrorNoError_c;
-
-}
-
-/************************************************************************************
-* MLMESetSyncWordSize
-*
-* Function used to change the synchronization word size. Values from 0 to 8 required.
-* IMPORTANT-> Use below arguments only (indicating a direct value from 1-8 will not work)
-* Inputs :
-* SyncConfig_SyncSize_1
-* SyncConfig_SyncSize_2
-* SyncConfig_SyncSize_3
-* SyncConfig_SyncSize_4
-* SyncConfig_SyncSize_5
-* SyncConfig_SyncSize_6
-* SyncConfig_SyncSize_7
-* SyncConfig_SyncSize_8
-*
-************************************************************************************/
-smacErrors_t MLMESetSyncWordSize
-(
-uint8_t u8syncWordSize
-)
-{
-
- phyStatus_t status;
-#if(TRUE == smacInitializationValidation_d)
- if(FALSE == mSmacInitialized)
- {
- return gErrorNoValidCondition_c;
- }
-#endif /* TRUE == smacInitializationValidation_d */
-
- if(mSmacStateIdle_c != smacState)
- {
- return gErrorBusy_c;
- }
-
- status = (phyStatus_t)Phy_SetSyncWordSize(u8syncWordSize);
- if(status == gPhyInvalidParameter_c)
- return gErrorOutOfRange_c;
-
- smacPacketConfig.u8SyncWordSize = u8syncWordSize;
-
- return gErrorNoError_c;
-
-}
-
-/************************************************************************************
-* MLMESetSyncWordValue
-*
-* Function used to change the synchronization word value.
-*
-*
-************************************************************************************/
-smacErrors_t MLMESetSyncWordValue
-(
-uint8_t *u8syncWordValue
-)
-{
- uint8_t syncWordSizeTemp = smacPacketConfig.u8SyncWordSize;
- uint8_t syncValueRegIndex = 0;
-
-#if(TRUE == smacInitializationValidation_d)
- if(FALSE == mSmacInitialized)
- {
- return gErrorNoValidCondition_c;
- }
-#endif /* TRUE == smacInitializationValidation_d */
-
- if(mSmacStateIdle_c != smacState)
- {
- return gErrorBusy_c;
- }
-
- smacPacketConfig.u8SyncWordValue = u8syncWordValue;
-
- while (syncWordSizeTemp--)
- {
- Phy_SetSyncWordValue(syncValueRegIndex, (uint8_t)*u8syncWordValue);
- syncValueRegIndex++;
- u8syncWordValue++;
- }
- while(syncValueRegIndex < 8)
- {
- Phy_SetSyncWordValue(syncValueRegIndex, 0x00);
- syncValueRegIndex++;
- }
-
- return gErrorNoError_c;
-
-}
-
-/************************************************************************************
-* MLMEPacketConfig
-*
-*
-*
-************************************************************************************/
-smacErrors_t MLMEPacketConfig
-(
-packetConfig_t *pPacketCfg
-)
-{
- smacErrors_t err = gErrorNoError_c;
-#if(TRUE == smacInitializationValidation_d)
- if(FALSE == mSmacInitialized)
- {
- return gErrorNoValidCondition_c;
- }
-#endif /* TRUE == smacInitializationValidation_d */
-
- if(mSmacStateIdle_c != smacState)
- {
- return gErrorBusy_c;
- }
- err = MLMESetSyncWordSize(pPacketCfg->u8SyncWordSize);
- err |= MLMESetSyncWordValue(pPacketCfg->pu8SyncWord);
- err |= MLMESetPreambleLength(pPacketCfg->u16PreambleSize);
- if(err != gErrorNoError_c)
- return gErrorOutOfRange_c;
-
- return gErrorNoError_c;
-}
-
-#endif
-
-/************************************************************************************
-* MLMESetChannelRequest
-*
-*
-*
-************************************************************************************/
-smacErrors_t MLMESetChannelRequest
-(
-channels_t newChannel
-)
-{
- uint8_t errorVal;
- smacErrors_t err = gErrorNoError_c;
-
- macToPlmeMessage_t lMsg;
-#if(TRUE == smacInitializationValidation_d)
- if(FALSE == mSmacInitialized)
- {
- return gErrorNoValidCondition_c;
- }
-#endif /* TRUE == smacInitializationValidation_d */
- if(mSmacStateIdle_c != smacState)
- {
- return gErrorBusy_c;
- }
- lMsg.msgType = gPlmeSetReq_c;
- lMsg.macInstance = smacInstance;
- lMsg.msgData.setReq.PibAttribute = gPhyPibCurrentChannel_c;
- lMsg.msgData.setReq.PibAttributeValue = (uint64_t) newChannel;
-
- errorVal = MAC_PLME_SapHandler(&lMsg, 0);
- switch (errorVal)
- {
- case gPhyBusy_c:
- err = gErrorBusy_c;
- break;
-
- case gPhyInvalidParameter_c:
- err = gErrorOutOfRange_c;
- break;
-
- case gPhySuccess_c:
- err = gErrorNoError_c;
- break;
-
- default:
- err = gErrorOutOfRange_c;
- break;
- }
-
- return err;
-}
-
-
-/************************************************************************************
-* MLMESetAdditionalRFOffset
-*
-*************************************************************************************/
-smacErrors_t MLMESetAdditionalRFOffset (uint32_t additionalRFOffset)
-{
-#if(TRUE == smacInitializationValidation_d)
- if(FALSE == mSmacInitialized)
- {
- return gErrorNoValidCondition_c;
- }
-#endif /* TRUE == smacInitializationValidation_d */
-
-#ifdef gIncludeCalibrationOption
- gPhyPib.mPIBAdditionalRFFrequencyOffset = additionalRFOffset;
- return gErrorNoError_c;
-#else
- return gErrorNoResourcesAvailable_c;
-#endif
-}
-
-
-/************************************************************************************
-* MLMEGetAdditionalRFOffset
-*
-*************************************************************************************/
-uint32_t MLMEGetAdditionalRFOffset( void )
-{
-#ifdef gIncludeCalibrationOption
- return gPhyPib.mPIBAdditionalRFFrequencyOffset;
-#else
- return 0;
-#endif
-}
-
-#if defined (gPHY_802_15_4g_d)
-/************************************************************************************
-* MLMESetFreqBand
-*
-************************************************************************************/
-smacErrors_t MLMESetFreqBand
-(
-smacFrequencyBands_t freqBand,
-smacRFModes_t phyMode
-)
-{
- return gErrorNoResourcesAvailable_c;
-}
-
-smacErrors_t MLMESetPhyMode(smacRFModes_t phyMode)
-{
-#if(TRUE == smacInitializationValidation_d)
- if(FALSE == mSmacInitialized)
- {
- return gErrorNoValidCondition_c;
- }
-#endif /* TRUE == smacInitializationValidation_d */
- phyStatus_t err;
- macToPlmeMessage_t lMsg;
-
- if(mSmacStateIdle_c != smacState)
- {
- return gErrorBusy_c;
- }
- lMsg.macInstance = smacInstance;
- lMsg.msgType = gPlmeSetReq_c;
- lMsg.msgData.setReq.PibAttribute = gPhyPibCurrentMode_c;
- lMsg.msgData.setReq.PibAttributeValue = (uint64_t)phyMode;
- err = MAC_PLME_SapHandler(&lMsg, 0);
- if(err == gPhyInvalidParameter_c)
- return gErrorOutOfRange_c;
- if(err == gPhyBusy_c)
- return gErrorBusy_c;
-
- gTotalChannels = gPhyPib.pPIBphyRfConstants->totalNumChannels;
-
- return gErrorNoError_c;
-}
-
-#endif
-/************************************************************************************
-* MLMEGetChannelRequest
-*
-*
-*
-************************************************************************************/
-channels_t MLMEGetChannelRequest
-(
-void
-)
-{
- channels_t currentChannel;
- macToPlmeMessage_t lMsg;
-#if(TRUE == smacInitializationValidation_d)
- if(FALSE == mSmacInitialized)
- {
- //panic(0,0,0,0);
- }
-#endif /* TRUE == smacInitializationValidation_d */
- lMsg.msgType = gPlmeGetReq_c;
- lMsg.macInstance = smacInstance;
- lMsg.msgData.getReq.PibAttribute = gPhyPibCurrentChannel_c;
- lMsg.msgData.getReq.pPibAttributeValue = (uint64_t*)¤tChannel;
- MAC_PLME_SapHandler(&lMsg, 0);
- return currentChannel;
-}
-
-#if defined (gPHY_802_15_4g_d)
-/************************************************************************************
-* MLMERssi
-*
-*
-*
-************************************************************************************/
-uint8_t MLMERssi(void )
-{
- uint8_t rssiVal;
-
-#if(TRUE == smacInitializationValidation_d)
- if(FALSE == mSmacInitialized)
- {
- return gErrorNoValidCondition_c;
- }
-#endif /* TRUE == smacInitializationValidation_d */
-
- if(mSmacStateIdle_c != smacState)
- {
- return gErrorBusy_c;
- }
-
- rssiVal = Phy_GetRssi();
- return rssiVal;
-}
-
-/************************************************************************************
-* MLMESetCCADuration
-*
-*
-*
-************************************************************************************/
-smacErrors_t MLMESetCCADuration(uint64_t usCCADuration )
-{
- macToPlmeMessage_t lMsg;
- phyStatus_t status;
-
-#if(TRUE == smacInitializationValidation_d)
- if(FALSE == mSmacInitialized)
- {
- return gErrorNoValidCondition_c;
- }
-#endif /* TRUE == smacInitializationValidation_d */
-
- if(mSmacStateIdle_c != smacState)
- {
- return gErrorBusy_c;
- }
-
- usCCADuration = TIME_US_TO_TICKS(usCCADuration);
- Phy_TimeDivider((phyTime_t*)&usCCADuration);
-
- lMsg.msgType = gPlmeSetReq_c;
- lMsg.msgData.setReq.PibAttribute = gPhyPibCCADuration_c;
- lMsg.msgData.setReq.PibAttributeValue = usCCADuration;
- status = MAC_PLME_SapHandler(&lMsg, 0);
-
- if(status == gPhySuccess_c)
- return gErrorNoError_c;
- else
- return gErrorNoResourcesAvailable_c;
-}
-
-/************************************************************************************
-* MLMESetInterPacketRxDelay
-*
-* IMPORTANT-> Use below arguments only (indicating a direct value from 1-12 will not work)
-* Inputs :
-*
-* InterPacketRxDelay_0
-* InterPacketRxDelay_1
-* InterPacketRxDelay_2
-* InterPacketRxDelay_3
-* InterPacketRxDelay_4
-* InterPacketRxDelay_5
-* InterPacketRxDelay_6
-* InterPacketRxDelay_7
-* InterPacketRxDelay_8
-* InterPacketRxDelay_9
-* InterPacketRxDelay_A
-* InterPacketRxDelay_B
-************************************************************************************/
-smacErrors_t MLMESetInterPacketRxDelay
-(
-uint8_t u8InterPacketRxDelay
-)
-{
-#if(TRUE == smacInitializationValidation_d)
- if(FALSE == mSmacInitialized)
- {
- return gErrorNoValidCondition_c;
- }
-#endif /* TRUE == smacInitializationValidation_d */
-
- if(mSmacStateIdle_c != smacState)
- {
- return gErrorBusy_c;
- }
-
- if (gPhySuccess_c != Phy_SetInterPacketRxDelay(u8InterPacketRxDelay))
- {
- return gErrorOutOfRange_c;
- }
- return gErrorNoError_c;
-}
-
-#endif
-/************************************************************************************
-* MLMERXDisableRequest
-*
-* Returns the radio to idle mode from receive mode.
-*
-************************************************************************************/
-smacErrors_t MLMERXDisableRequest(void)
-{
- macToPlmeMessage_t lMsg;
- phyStatus_t err;
-#if(TRUE == smacInitializationValidation_d)
- if(FALSE == mSmacInitialized)
- {
- return gErrorNoValidCondition_c;
- }
-#endif
- if((mSmacStateReceiving_c != smacState) && (mSmacStateIdle_c != smacState))
- {
- return gErrorNoValidCondition_c;
- }
- lMsg.macInstance = smacInstance;
- if(!mSmacTimeoutAsked)
- {
- lMsg.msgType = gPlmeSetReq_c;
- lMsg.msgData.setReq.PibAttribute = gPhyPibRxOnWhenIdle;
- lMsg.msgData.setReq.PibAttributeValue = (uint64_t)0;
- err = MAC_PLME_SapHandler(&lMsg, 0);
- if(err != gPhySuccess_c)
- return gErrorBusy_c;
- }
- else
- {
- lMsg.msgType = gPlmeSetTRxStateReq_c;
- lMsg.msgData.setTRxStateReq.state = gPhyForceTRxOff_c;
- (void)MAC_PLME_SapHandler(&lMsg, 0);
- mSmacTimeoutAsked = FALSE;
- }
- smacState= mSmacStateIdle_c;
-
- return gErrorNoError_c;
-
-}
-
-/*@CMA, Conn Test Added*/
-/************************************************************************************
-* MLMETXDisableRequest
-*
-* Returns the radio to idle mode from Tx mode.
-*
-************************************************************************************/
-void MLMETXDisableRequest(void)
-{
- macToPlmeMessage_t lMsg;
- lMsg.macInstance = smacInstance;
- lMsg.msgType = gPlmeSetTRxStateReq_c;
- lMsg.msgData.setTRxStateReq.state = gPhyForceTRxOff_c;
- (void)MAC_PLME_SapHandler(&lMsg, 0);
- if(gSmacDataMessage != NULL)
- {
- (void)MEM_BufferFree(gSmacDataMessage);
- gSmacDataMessage = NULL;
- }
- smacState= mSmacStateIdle_c;
-}
-
-/************************************************************************************
-* MLMELinkQuality
-*
-* This function returns an integer value that is the link quality from the last
-* received packet of the form: dBm = (-Link Quality/2).
-*
-************************************************************************************/
-uint8_t MLMELinkQuality(void)
-{
-#if(TRUE == smacInitializationValidation_d)
- if(FALSE == mSmacInitialized)
- {
- return 0;
- }
-#endif
- return smacLastDataRxParams.linkQuality;
-}
-
-/************************************************************************************
-* MLMEPAOutputAdjust
-*
-*
-************************************************************************************/
-smacErrors_t MLMEPAOutputAdjust
-(
-uint8_t u8PaValue
-)
-{
- macToPlmeMessage_t lMsg;
- smacErrors_t err = gErrorNoError_c;
- uint8_t errorVal;
-#if(TRUE == smacInitializationValidation_d)
- if(FALSE == mSmacInitialized)
- {
- return gErrorNoValidCondition_c;
- }
-#endif /* TRUE == smacInitializationValidation_d */
-
- if(mSmacStateIdle_c != smacState)
- {
- return gErrorBusy_c;
- }
- lMsg.macInstance = smacInstance;
- lMsg.msgType = gPlmeSetReq_c;
- lMsg.msgData.setReq.PibAttribute = gPhyPibTransmitPower_c;
- lMsg.msgData.setReq.PibAttributeValue = (uint64_t) u8PaValue;
- errorVal = MAC_PLME_SapHandler(&lMsg, 0);
- switch (errorVal)
- {
- case gPhyBusy_c:
- err = gErrorBusy_c;
- break;
-
- case gPhyInvalidParameter_c:
- err = gErrorOutOfRange_c;
- break;
-
- case gPhySuccess_c:
- err = gErrorNoError_c;
- break;
-
- default:
- err = gErrorOutOfRange_c;
- break;
- }
-
- return err;
-}
-
-/************************************************************************************
-* MLMEScanRequest
-*
-* This function returns the RSSI value of the channel passes as a parameter
-*
-*
-************************************************************************************/
-smacErrors_t MLMEScanRequest(channels_t u8ChannelToScan)
-{
- smacErrors_t err = gErrorNoError_c;
- phyStatus_t u8PhyRes;
-#if(TRUE == smacInitializationValidation_d)
- if(FALSE == mSmacInitialized)
- {
- return gErrorNoValidCondition_c;
- }
-#endif /* TRUE == smacInitializationValidation_d */
-
- if(mSmacStateIdle_c != smacState)
- {
- return gErrorBusy_c;
- }
- if(u8ChannelToScan != MLMEGetChannelRequest())
- err = MLMESetChannelRequest(u8ChannelToScan);
- if(err != gErrorNoError_c)
- return err;
-
- macToPlmeMessage_t* pMsg = (macToPlmeMessage_t*)MEM_BufferAlloc(sizeof(macToPlmeMessage_t));
- pMsg->msgType = gPlmeEdReq_c;
- pMsg->msgData.edReq.startTime = gPhySeqStartAsap_c;
- pMsg->macInstance = smacInstance;
- gSmacMlmeMessage = pMsg;
- u8PhyRes = MAC_PLME_SapHandler(pMsg,0);
- if(u8PhyRes != gPhySuccess_c)
- {
- MEM_BufferFree(gSmacMlmeMessage);
- gSmacMlmeMessage = NULL;
- return gErrorBusy_c;
- }
- smacState = mSmacStateScanningChannels_c;
- return gErrorNoError_c;
-}
-
-
-/************************************************************************************
-* MLMECcaRequest
-*
-* This function performs Clear Channel Assessment on the active channel
-*
-*
-************************************************************************************/
-smacErrors_t MLMECcaRequest()
-{
- phyStatus_t u8PhyRes;
-#if(TRUE == smacInitializationValidation_d)
- if(FALSE == mSmacInitialized)
- {
- return gErrorNoValidCondition_c;
- }
-#endif /* TRUE == smacInitializationValidation_d */
-
- if(mSmacStateIdle_c != smacState)
- {
- return gErrorBusy_c;
- }
- macToPlmeMessage_t* pMsg = (macToPlmeMessage_t*)MEM_BufferAlloc(sizeof(macToPlmeMessage_t));
- pMsg->msgType = gPlmeCcaReq_c;
- pMsg->msgData.ccaReq.ccaType = gPhyCCAMode1_c;
- pMsg->msgData.ccaReq.contCcaMode = gPhyContCcaDisabled;
- pMsg->macInstance = smacInstance;
- gSmacMlmeMessage = pMsg;
- u8PhyRes = MAC_PLME_SapHandler(pMsg,0);
- if(u8PhyRes != gPhySuccess_c)
- {
- MEM_BufferFree(gSmacMlmeMessage);
- gSmacMlmeMessage = NULL;
- return gErrorBusy_c;
- }
- smacState = mSmacStatePerformingCca_c;
- return gErrorNoError_c;
-}
-/************************************************************************************
-* MLMEPhySoftReset
-*
-* This function performs a software reset on the radio, PHY and SMAC state machines.
-*
-*
-************************************************************************************/
-smacErrors_t MLMEPhySoftReset
-(
-void
-)
-{
- macToPlmeMessage_t lMsg;
-#if(TRUE == smacInitializationValidation_d)
- if(FALSE == mSmacInitialized)
- {
- return gErrorNoValidCondition_c;
- }
-#endif /* TRUE == smacInitializationValidation_d */
-//
-// if(mSmacStateIdle_c != smacState)
-// {
-// return gErrorBusy_c;
-// }
- lMsg.macInstance = smacInstance;
- lMsg.msgType = gPlmeSetTRxStateReq_c;
- lMsg.msgData.setTRxStateReq.state = gPhyForceTRxOff_c;
- (void)MAC_PLME_SapHandler(&lMsg, 0);
- smacState= mSmacStateIdle_c;
-
- return gErrorNoError_c;
-}
-/************************************************************************************
-* PD_SMAC_SapHandler
-*
-* This SAP handles data confirm and data indication from PHY.
-*
-************************************************************************************/
-phyStatus_t PD_SMAC_SapHandler(void* pMsg, instanceId_t smacInstanceId)
-{
- phyStatus_t status = gPhyInvalidPrimitive_c;
- smacToAppDataMessage_t* pSmacMsg;
- pdDataToMacMessage_t* pDataMsg = (pdDataToMacMessage_t*)pMsg;
- (void)smacInstanceId;
-
- switch(pDataMsg->msgType)
- {
- case gPdDataCnf_c:
- //no data request was fired
- if(NULL == gSmacDataMessage)
- {
- status = gPhySuccess_c;
- }
- else
- {
- //phy finished work with the data request packet so it can be freed
- MEM_BufferFree(gSmacDataMessage);
- gSmacDataMessage = NULL;
-
- pSmacMsg = (smacToAppDataMessage_t*)MEM_BufferAlloc(sizeof(smacToAppDataMessage_t));
- if(pSmacMsg == NULL)
- {
- status = gPhySuccess_c;
- }
- else
- {
- pSmacMsg->msgType = gMcpsDataCnf_c;
- pSmacMsg->msgData.dataCnf.status = gErrorNoError_c;
- // call App Sap
- gSMAC_APP_MCPS_SapHandler(pSmacMsg,smacInstance);
- }
- smacState = mSmacStateIdle_c;
- }
- break;
- case gPdDataInd_c:
- if(FALSE == SMACPacketCheck(pDataMsg))
- {
- MEM_BufferFree(pDataMsg);
- status = gPhySuccess_c;
- }
- else
- {
- smacLastDataRxParams.linkQuality = ((pdDataToMacMessage_t*)pMsg)->msgData.dataInd.ppduLinkQuality;
- smacLastDataRxParams.timeStamp = (phyTime_t)((pdDataToMacMessage_t*)pMsg)->msgData.dataInd.timeStamp;
- smacProccesPacketPtr.smacRxPacketPointer->rxStatus = rxSuccessStatus_c;
-
- // in case no timeout was asked we need to unset RXOnWhenIdle Pib.
- if(!mSmacTimeoutAsked)
- {
- (void)MLMERXDisableRequest();
- }
- smacProccesPacketPtr.smacRxPacketPointer->u8DataLength =
- pDataMsg->msgData.dataInd.psduLength - gSmacHeaderBytes_c;
- FLib_MemCpy(&smacProccesPacketPtr.smacRxPacketPointer->smacHeader,
- ((smacHeader_t*)pDataMsg->msgData.dataInd.pPsdu),
- gSmacHeaderBytes_c);
- FLib_MemCpy(&smacProccesPacketPtr.smacRxPacketPointer->smacPdu,
- ((smacPdu_t*)(pDataMsg->msgData.dataInd.pPsdu + gSmacHeaderBytes_c)),
- smacProccesPacketPtr.smacRxPacketPointer->u8DataLength);
-
- pSmacMsg = (smacToAppDataMessage_t*)MEM_BufferAlloc(sizeof(smacToAppDataMessage_t));
- if(pSmacMsg == NULL)
- {
- status = gPhySuccess_c;
- }
- else
- {
- pSmacMsg->msgType = gMcpsDataInd_c;
- pSmacMsg->msgData.dataInd.pRxPacket = smacProccesPacketPtr.smacRxPacketPointer;
- pSmacMsg->msgData.dataInd.u8LastRxRssi = PhyGetLastRxRssiValue();
- gSMAC_APP_MCPS_SapHandler(pSmacMsg,smacInstance);
- }
- smacState = mSmacStateIdle_c;
- }
- break;
- default:
- break;
- }
- MEM_BufferFree(pMsg);
- return status;
-}
-
-/************************************************************************************
-* PLME_SMAC_SapHandler
-*
-* This SAP handles management for confirms and indications from PHY.
-*
-************************************************************************************/
-
-phyStatus_t PLME_SMAC_SapHandler(void* pMsg, instanceId_t smacInstanceId)
-{
- MEM_BufferFree(gSmacMlmeMessage);
- gSmacMlmeMessage = NULL;
- uint32_t backOffTime;
-
- plmeToMacMessage_t* pPlmeMsg = (plmeToMacMessage_t*)pMsg;
-
- smacToAppMlmeMessage_t* pSmacToApp;
- smacToAppDataMessage_t* pSmacMsg;
- switch(pPlmeMsg->msgType)
- {
- case gPlmeCcaCnf_c:
- if(pPlmeMsg->msgData.ccaCnf.status == gPhyChannelBusy_c &&
- smacState == mSmacStateTransmitting_c)
- {
- if(txConfigurator.ccaBeforeTx)
- {
- if(txConfigurator.retryCountCCAFail > u8CCARetryCounter)
- {
- //increment cca fail counter
- u8CCARetryCounter++;
- //get random number for backoff time.
- RNG_GetRandomNo(&backOffTime);
- //start event timer. After time elapses, Data request will be fired.
- TMR_StartSingleShotTimer(u8BackoffTimerId, ((backOffTime & gMaxBackoffTime_c) + gMinBackoffTime_c), BackoffTimeElapsed, NULL);
- }
- else
- {
- MEM_BufferFree(gSmacDataMessage);
- gSmacDataMessage = NULL;
-
- //retries failed so create message for the application
- pSmacMsg = (smacToAppDataMessage_t*)MEM_BufferAlloc(sizeof(smacToAppDataMessage_t));
- if(pSmacMsg != NULL)
- {
- //error type : Channel Busy
- pSmacMsg->msgData.dataCnf.status = gErrorChannelBusy_c;
- //type is Data Confirm
- pSmacMsg->msgType = gMcpsDataCnf_c;
- gSMAC_APP_MCPS_SapHandler(pSmacMsg, smacInstance);
- }
- //place SMAC into idle state
- smacState = mSmacStateIdle_c;
- }
- }
- MEM_BufferFree(pMsg);
- return gPhySuccess_c;
- }
- //if SMAC isn't in TX then definitely it is a CCA confirm
- //allocate a message for the application
- pSmacToApp = (smacToAppMlmeMessage_t*)MEM_BufferAlloc(sizeof(smacToAppMlmeMessage_t));
- if(pSmacToApp != NULL)
- {
- //type is CCA Confirm
- pSmacToApp->msgType = gMlmeCcaCnf_c;
- //Channel status translated into SMAC messages: idle channel means no error.
- if(pPlmeMsg->msgData.ccaCnf.status == gPhyChannelIdle_c)
- {
- pSmacToApp->msgData.ccaCnf.status = gErrorNoError_c;
- }
- else
- {
- pSmacToApp->msgData.ccaCnf.status = gErrorChannelBusy_c;
- }
- }
- break;
- case gPlmeEdCnf_c:
- //allocate a message for the application
- pSmacToApp = (smacToAppMlmeMessage_t*)MEM_BufferAlloc(sizeof(smacToAppMlmeMessage_t));
- if(pSmacToApp != NULL)
- {
- //message type is ED Confirm
- pSmacToApp->msgType = gMlmeEdCnf_c;
- if(pPlmeMsg->msgData.edCnf.status == gPhySuccess_c)
- {
- pSmacToApp->msgData.edCnf.status = gErrorNoError_c;
- pSmacToApp->msgData.edCnf.energyLevel = pPlmeMsg->msgData.edCnf.energyLevel;
- pSmacToApp->msgData.edCnf.energyLeveldB = pPlmeMsg->msgData.edCnf.energyLeveldB;
- pSmacToApp->msgData.edCnf.scannedChannel = MLMEGetChannelRequest();
- }
- else
- {
- pSmacToApp->msgData.edCnf.status = gErrorBusy_c;
- }
- }
- break;
- case gPlmeTimeoutInd_c:
- if(smacState == mSmacStateTransmitting_c)
- {
- if(txConfigurator.autoAck)
- {
- //re-arm retries for channel busy at retransmission.
- u8CCARetryCounter = 0;
-
- if(txConfigurator.retryCountAckFail > u8AckRetryCounter)
- {
- u8AckRetryCounter++;
-
- RNG_GetRandomNo(&backOffTime);
- //start event timer. After time elapses, Data request will be fired.
- TMR_StartSingleShotTimer(u8BackoffTimerId, ((backOffTime & gMaxBackoffTime_c) + gMinBackoffTime_c), BackoffTimeElapsed, NULL);
- }
- else
- {
- (void)MEM_BufferFree(gSmacDataMessage);
- gSmacDataMessage = NULL;
-
- //retries failed so create message for the application
- pSmacMsg = (smacToAppDataMessage_t*)MEM_BufferAlloc(sizeof(smacToAppDataMessage_t));
- if(pSmacMsg != NULL)
- {
- //set error code: No Ack
- pSmacMsg->msgData.dataCnf.status = gErrorNoAck_c;
- //type is Data Confirm
- pSmacMsg->msgType = gMcpsDataCnf_c;
-
- gSMAC_APP_MCPS_SapHandler(pSmacMsg, smacInstance);
- }
- //place SMAC into idle state
- smacState = mSmacStateIdle_c;
- }
- }
- MEM_BufferFree(pMsg);
- return gPhySuccess_c;
- }
- //if no ack timeout was received then it is definitely a RX timeout
- pSmacToApp = (smacToAppMlmeMessage_t*)MEM_BufferAlloc(sizeof(smacToAppMlmeMessage_t));
- if(pSmacToApp != NULL)
- {
- if(smacState == mSmacStateReceiving_c)
- {
- smacProccesPacketPtr.smacRxPacketPointer->rxStatus = rxTimeOutStatus_c;
- }
- pSmacToApp->msgType = gMlmeTimeoutInd_c;
- }
- break;
- case gPlme_UnexpectedRadioResetInd_c:
- pSmacToApp = (smacToAppMlmeMessage_t*)MEM_BufferAlloc(sizeof(smacToAppMlmeMessage_t));
- if(pSmacToApp != NULL)
- pSmacToApp->msgType = gMlme_UnexpectedRadioResetInd_c;
- break;
- default:
- //MEM_BufferFree(pSmacToApp);
- MEM_BufferFree(pMsg);
- return gPhySuccess_c;
- }
- smacState = mSmacStateIdle_c;
- //send message to upper layer if it is not NULL
- if(pSmacToApp != NULL)
- (gSMAC_APP_MLME_SapHandler)(pSmacToApp,0);
- MEM_BufferFree(pMsg);
- return gPhySuccess_c;
-}
-
-/************************************************************************************
-* Smac_RegisterSapHandlers
-*
-* This function helps the user register the handlers for the messages that come from
-* SMAC.
-*
-************************************************************************************/
-
-void Smac_RegisterSapHandlers(
- SMAC_APP_MCPS_SapHandler_t pSMAC_APP_MCPS_SapHandler,
- SMAC_APP_MLME_SapHandler_t pSMAC_APP_MLME_SapHandler,
- instanceId_t smacInstanceId
- )
-{
- gSMAC_APP_MCPS_SapHandler = pSMAC_APP_MCPS_SapHandler;
- gSMAC_APP_MLME_SapHandler = pSMAC_APP_MLME_SapHandler;
- (void)smacInstanceId;
-}
-
-/************************************************************************************
-* SMACFillHeader
-*
-* This function helps the user fill the SMAC header(short hardcoded MAC header) with
-* the desired short destination address.
-*
-************************************************************************************/
-
-void SMACFillHeader(smacHeader_t* pSmacHeader, uint16_t destAddr)
-{
- pSmacHeader->frameControl = gSmacDefaultFrameCtrl;
- pSmacHeader->panId = u16PanID;
- pSmacHeader->seqNo = gSmacDefaultSeqNo;
- pSmacHeader->srcAddr = u16ShortSrcAddress;
- pSmacHeader->destAddr = destAddr;
-}
-
-/************************************************************************************
-* InitSmac
-*
-* Basic SMAC initialisation.
-*
-************************************************************************************/
-void InitSmac(void)
-{
- /* SMAC Initialization */
- smacState = mSmacStateIdle_c;
- smacLastDataRxParams.linkQuality = 0;
- smacLastDataRxParams.timeStamp = 0;
- uint32_t u32RandomNo;
-#if defined(gPHY_802_15_4g_d)
- gTotalChannels = gPhyPib.pPIBphyRfConstants->totalNumChannels;
-#else
- gTotalChannels = 26;
-#endif
-
-
-#if(TRUE == smacInitializationValidation_d)
- mSmacInitialized = TRUE;
-#endif
- txConfigurator.autoAck = FALSE;
- txConfigurator.ccaBeforeTx = FALSE;
- txConfigurator.retryCountAckFail = 0;
- txConfigurator.retryCountCCAFail = 0;
- u8BackoffTimerId = (uint8_t)TMR_AllocateTimer();
- RNG_Init();
- RNG_GetRandomNo(&u32RandomNo);
- u8SmacSeqNo = (uint8_t)u32RandomNo;
- //Notify the PHY what function to call for communicating with SMAC
- Phy_RegisterSapHandlers((PD_MAC_SapHandler_t)PD_SMAC_SapHandler, (PLME_MAC_SapHandler_t)PLME_SMAC_SapHandler, 0);
- u16PanID = gDefaultPanID_c;
- u16ShortSrcAddress = gNodeAddress_c;
- (void)SMACSetShortSrcAddress(u16ShortSrcAddress);
- (void)SMACSetPanID(u16PanID);
-}
-
-/************************************************************************************
-* SMACSetShortSrcAddress
-*
-* This function sets the short source address so that PHY can perform filtering
-*
-************************************************************************************/
-
-smacErrors_t SMACSetShortSrcAddress(uint16_t nwShortAddress)
-{
- macToPlmeMessage_t lMsg;
- lMsg.msgType = gPlmeSetReq_c;
- lMsg.msgData.setReq.PibAttribute = gPhyPibShortAddress_c;
- lMsg.msgData.setReq.PibAttributeValue = (uint64_t)nwShortAddress;
-
- phyStatus_t u8PhyRes = MAC_PLME_SapHandler(&lMsg,0);
- if(u8PhyRes == gPhyBusy_c || u8PhyRes == gPhyBusyTx_c || u8PhyRes == gPhyBusyRx_c)
- return gErrorBusy_c;
- if(u8PhyRes != gPhySuccess_c)
- return gErrorNoResourcesAvailable_c;
- u16ShortSrcAddress = nwShortAddress;
- return gErrorNoError_c;
-}
-
-/************************************************************************************
-* SMACSetPanID
-*
-* This function sets the pan ID so that PHY can perform filtering
-*
-************************************************************************************/
-
-smacErrors_t SMACSetPanID(uint16_t nwShortPanID)
-{
- macToPlmeMessage_t lMsg;
- lMsg.msgType = gPlmeSetReq_c;
- lMsg.msgData.setReq.PibAttribute = gPhyPibPanId_c;
- lMsg.msgData.setReq.PibAttributeValue = (uint64_t)nwShortPanID;
-
- phyStatus_t u8PhyRes = MAC_PLME_SapHandler(&lMsg,0);
- if(u8PhyRes == gPhyBusy_c || u8PhyRes == gPhyBusyTx_c || u8PhyRes == gPhyBusyRx_c)
- return gErrorBusy_c;
- if(u8PhyRes != gPhySuccess_c)
- return gErrorNoResourcesAvailable_c;
- u16PanID = nwShortPanID;
- return gErrorNoError_c;
-}
-
-void BackoffTimeElapsed(void const *arg)
-{
- uint8_t u8PhyRes = MAC_PD_SapHandler(gSmacDataMessage, 0);
- if(u8PhyRes != gPhySuccess_c)
- {
- smacState = mSmacStateIdle_c;
- MEM_BufferFree(gSmacDataMessage);
- gSmacDataMessage = NULL;
- }
-}
-
-/************************************************************************************
-* SMACPacketCheck
-*
-* This function returns TRUE if Phy payload can be of SMAC packet type
-*
-************************************************************************************/
-
-bool_t SMACPacketCheck(pdDataToMacMessage_t* pMsgFromPhy)
-{
- //check if packet is of type Data
- if( (pMsgFromPhy->msgData.dataInd.pPsdu[0] & 0x07) != 0x01 )
- return FALSE;
- //check if PSDU length is at least of smac header size.
- if( (pMsgFromPhy->msgData.dataInd.psduLength < gSmacHeaderBytes_c) )
- return FALSE;
-
- return TRUE;
-}
--- a/FSL_IEEE_802_15_4/SMAC/SMAC.h Fri Jul 31 13:49:46 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,118 +0,0 @@
-/**************************************************************************************************
-* SMAC implementation.
-*
-* Freescale Semiconductor Inc.
-* (c) Copyright 2004-2010 Freescale Semiconductor, Inc.
-* ALL RIGHTS RESERVED.
-*
-***************************************************************************************************
-*
-* THIS SOFTWARE IS PROVIDED BY FREESCALE "AS IS" AND ANY EXPRESSED OR
-* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
-* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
-* IN NO EVENT SHALL FREESCALE OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
-* INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
-* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
-* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
-* THE POSSIBILITY OF SUCH DAMAGE.
-*
-***********************************************************************************************//*!
-**************************************************************************************************/
-
-#ifndef SMAC_H_
-#define SMAC_H_
-
-/************************************************************************************
-*************************************************************************************
-* Includes
-*************************************************************************************
-************************************************************************************/
-
-#include "SMAC_Interface.h"
-#include "Phy.h"
-#include "PhyInterface.h"
-//#include "TimersManager.h"
-#include "RNG_Interface.h"
-
-#if defined (gPHY_802_15_4g_d)
-#include "PhyPib.h"
-#include "PhyExtended.h"
-#include "PhyTime.h"
-#endif
-/************************************************************************************
-*************************************************************************************
-* Private Prototypes
-*************************************************************************************
-************************************************************************************/
-void SmacSetRxTimeout(smacTime_t timeoutSymbols);
-
-#if defined (gPHY_802_15_4g_d)
-
-#define smacPreambleSizeOf16_c (16)
-#define smacPreambleSizeOf3_c (3)
-
-#endif
-/*smacParametersValidation_d:
-TRUE : SMAC primitives validate their incoming parameters.
-FALSE: SMAC primitives do their stuff without validating their incoming
-parameters
-*Note: Setting this as FALSE will compile a smaller foot print SMAC.
-*/
-#define smacParametersValidation_d TRUE
-
-/*smacInitializationValidation_d:
-TRUE : SMAC primitives validate whether SMAC is initialized or not.
-FALSE: SMAC primitives don't care about SMAC's initialization.
-*Note: Setting this as FALSE will compile a smaller foot print SMAC.
-*/
-#define smacInitializationValidation_d TRUE
-
-#define FRAME_CTRL_ACK_FIELD_SET (1 << 5)
-/************************************************************************************
-*************************************************************************************
-* Module Type definitions
-*************************************************************************************
-************************************************************************************/
-typedef enum smacStates_tag {
- mSmacStateIdle_c,
- mSmacStateTransmitting_c,
- mSmacStateReceiving_c,
- mSmacStateScanningChannels_c,
- mSmacStatePerformingCca_c,
- mSmacStatePerformingEd_c,
- mSmacStatePerformingTest_c,
- mSmacStateHibernate_c,
- mSmacStateDoze_c
-} smacStates_t;
-
-typedef union prssPacketPtr_tag
-{
- uint8_t* smacScanResultsPointer;
- rxPacket_t *smacRxPacketPointer;
- pdDataReq_t *smacTxPacketPointer;
-}prssPacketPtr_t;
-
-/***********************************************************************************
-* Phy to SMAC SAP prototype
-************************************************************************************/
-typedef phyStatus_t ( * PD_SMAC_SapHandler_t)(pdDataToMacMessage_t * pMsg, instanceId_t instanceId);
-
-typedef phyStatus_t ( * PLME_SMAC_SapHandler_t)(plmeToMacMessage_t * pMsg, instanceId_t instanceId);
-
-/***********************************************************************************
-* SMAC to App SAP handlers
-************************************************************************************/
-static SMAC_APP_MCPS_SapHandler_t gSMAC_APP_MCPS_SapHandler;
-static SMAC_APP_MLME_SapHandler_t gSMAC_APP_MLME_SapHandler;
-/************************************************************************************
-*************************************************************************************
-* Private definitions
-*************************************************************************************
-************************************************************************************/
-
-#define smacInstance 0
-
-#endif /* SMAC_H_ */
--- a/FSL_IEEE_802_15_4/SMAC/SMAC_Channels.h Fri Jul 31 13:49:46 2015 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,224 +0,0 @@ -/*! -* Copyright (c) 2014, Freescale Semiconductor, Inc. -* All rights reserved. -* -* \file SMAC_Channels.h -* -* Redistribution and use in source and binary forms, with or without modification, -* are permitted provided that the following conditions are met: -* -* o Redistributions of source code must retain the above copyright notice, this list -* of conditions and the following disclaimer. -* -* o Redistributions in binary form must reproduce the above copyright notice, this -* list of conditions and the following disclaimer in the documentation and/or -* other materials provided with the distribution. -* -* o Neither the name of Freescale Semiconductor, Inc. nor the names of its -* contributors may be used to endorse or promote products derived from this -* software without specific prior written permission. -* -* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR -* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -*/ - -#ifndef _SMAC_CHANNELS_H -#define _SMAC_CHANNELS_H - - -/************************************************************************************ -************************************************************************************* -* Include -************************************************************************************* -************************************************************************************/ - -/************************************************************************************ -************************************************************************************* -* Public macros -************************************************************************************* -************************************************************************************/ - -/************************************************************************************ -************************************************************************************* -* Public prototypes -************************************************************************************* -************************************************************************************/ - -/************************************************************************************ -************************************************************************************* -* Public type definitions -************************************************************************************* -************************************************************************************/ - -/************************************************************************************ -************************************************************************************* -* Public memory declarations -************************************************************************************* -************************************************************************************/ - -/************************************************************************************ -************************************************************************************* -* Public functions -************************************************************************************* -************************************************************************************/ - -/* 802.15.4-2006 maximum channel enumeration */ -#if defined (gPHY_802_15_4g_d) -gChannel0_c = 0, -gChannel1_c, -gChannel2_c, -gChannel3_c, -gChannel4_c, -gChannel5_c, -gChannel6_c, -gChannel7_c, -gChannel8_c, -gChannel9_c, -gChannel10_c, -gChannel11_c, -gChannel12_c, -gChannel13_c, -gChannel14_c, -gChannel15_c, -gChannel16_c, -gChannel17_c, -gChannel18_c, -gChannel19_c, -gChannel20_c, -gChannel21_c, -gChannel22_c, -gChannel23_c, -gChannel24_c, -gChannel25_c, -gChannel26_c, -gChannel27_c, -gChannel28_c, -gChannel29_c, -gChannel30_c, -gChannel31_c, -gChannel32_c, -gChannel33_c, -gChannel34_c, -gChannel35_c, -gChannel36_c, -gChannel37_c, -gChannel38_c, -gChannel39_c, -gChannel40_c, -gChannel41_c, -gChannel42_c, -gChannel43_c, -gChannel44_c, -gChannel45_c, -gChannel46_c, -gChannel47_c, -gChannel48_c, -gChannel49_c, -gChannel50_c, -gChannel51_c, -gChannel52_c, -gChannel53_c, -gChannel54_c, -gChannel55_c, -gChannel56_c, -gChannel57_c, -gChannel58_c, -gChannel59_c, -gChannel60_c, -gChannel61_c, -gChannel62_c, -gChannel63_c, -gChannel64_c, -gChannel65_c, -gChannel66_c, -gChannel67_c, -gChannel68_c, -gChannel69_c, -gChannel70_c, -gChannel71_c, -gChannel72_c, -gChannel73_c, -gChannel74_c, -gChannel75_c, -gChannel76_c, -gChannel77_c, -gChannel78_c, -gChannel79_c, -gChannel80_c, -gChannel81_c, -gChannel82_c, -gChannel83_c, -gChannel84_c, -gChannel85_c, -gChannel86_c, -gChannel87_c, -gChannel88_c, -gChannel89_c, -gChannel90_c, -gChannel91_c, -gChannel92_c, -gChannel93_c, -gChannel94_c, -gChannel95_c, -gChannel96_c, -gChannel97_c, -gChannel98_c, -gChannel99_c, -gChannel100_c, -gChannel101_c, -gChannel102_c, -gChannel103_c, -gChannel104_c, -gChannel105_c, -gChannel106_c, -gChannel107_c, -gChannel108_c, -gChannel109_c, -gChannel110_c, -gChannel111_c, -gChannel112_c, -gChannel113_c, -gChannel114_c, -gChannel115_c, -gChannel116_c, -gChannel117_c, -gChannel118_c, -gChannel119_c, -gChannel120_c, -gChannel121_c, -gChannel122_c, -gChannel123_c, -gChannel124_c, -gChannel125_c, -gChannel126_c, -gChannel127_c, -gChannel128_c -#else - -gChannel11_c = 0x0B, -gChannel12_c, -gChannel13_c, -gChannel14_c, -gChannel15_c, -gChannel16_c, -gChannel17_c, -gChannel18_c, -gChannel19_c, -gChannel20_c, -gChannel21_c, -gChannel22_c, -gChannel23_c, -gChannel24_c, -gChannel25_c, -gChannel26_c -#endif - -#endif /* _SMAC_CHANNELS_H */
--- a/FSL_IEEE_802_15_4/SMAC/SMAC_Config.h Fri Jul 31 13:49:46 2015 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,47 +0,0 @@ -/************************************************************************************************** -* This header contains SMAC basic configuration. -* -* Freescale Semiconductor Inc. -* (c) Copyright 2004-2010 Freescale Semiconductor, Inc. -* ALL RIGHTS RESERVED. -* -*************************************************************************************************** -* -* THIS SOFTWARE IS PROVIDED BY FREESCALE "AS IS" AND ANY EXPRESSED OR -* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES -* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. -* IN NO EVENT SHALL FREESCALE OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, -* INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) -* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, -* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING -* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF -* THE POSSIBILITY OF SUCH DAMAGE. -* -***********************************************************************************************//*! -**************************************************************************************************/ - -#ifndef SMAC_CONFIG_H_ -#define SMAC_CONFIG_H_ - -/* BEGIN SMAC Config Options Definition */ - -#define gNodeAddress_c (0xBEAD) -#define gDefaultPanID_c (0xFACE) -#define CCA_BEFORE_TX (FALSE) -#define gMaxRetriesAllowed_c ( 0x05 ) -//Make sure gMaxBackoffTime_c is of value (1<<n)-1. Ex: (1<<3)-1 = 7, (1<<4)-1 = 15; -#define gMaxBackoffTime_c ( 0x1F ) -#define gMinBackoffTime_c ( 0x00 ) -/* END SMAC Config Options Definition */ - -/* BEGIN Configuration Parameters Definition */ -#define gMaxOutputPower_c ( 0x1F ) -#define gMinOutputPower_c ( 0x03 ) -#define gDefaultOutputPower_c ( 0x0F ) -#define gDefaultChannelNumber_c gChannel11_c -#define gDefaultAddress_c (gBroadcastAddress_c) -/* END Configuration Parameters Definition */ - -#endif /* SMAC_CONFIG_H_ */
--- a/FSL_IEEE_802_15_4/SMAC/SMAC_Interface.h Fri Jul 31 13:49:46 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,729 +0,0 @@
-/**************************************************************************************************
-* SMAC Interface header file
-*
-* Freescale Semiconductor Inc.
-* (c) Copyright 2004-2014 Freescale Semiconductor, Inc.
-* ALL RIGHTS RESERVED.
-*
-***************************************************************************************************
-*
-* THIS SOFTWARE IS PROVIDED BY FREESCALE "AS IS" AND ANY EXPRESSED OR
-* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
-* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
-* IN NO EVENT SHALL FREESCALE OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
-* INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
-* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
-* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
-* THE POSSIBILITY OF SUCH DAMAGE.
-*
-***********************************************************************************************//*!
-**************************************************************************************************/
-
-#ifndef SMAC_INTERFACE_H_
-#define SMAC_INTERFACE_H_
-
-/************************************************************************************
-*************************************************************************************
-* Includes
-*************************************************************************************
-************************************************************************************/
-#include "EmbeddedTypes.h"
-#include "PhyTypes.h"
-/************************************************************************************
-*************************************************************************************
-* Interface macro definitions
-*************************************************************************************
-************************************************************************************/
-
-#define gSmacHeaderBytes_c ( sizeof(smacHeader_t) )
-#define gMaxSmacSDULength_c (gMaxPHYPacketSize_c -(sizeof(smacHeader_t) + 2) )
-#define gMinSmacSDULength_c (0)
-
-#define gBroadcastAddress_c (0xFFFF)
-#define gSmacDefaultFrameCtrl (0x8841)
-#define gSmacDefaultSeqNo (0xAB)
-/************************************************************************************
-*************************************************************************************
-* Public memory declarations
-*************************************************************************************
-************************************************************************************/
-// extern bool_t smacStandalone;
-extern uint8_t gTotalChannels;
-
-/************************************************************************************
-*************************************************************************************
-* Interface Type definitions
-*************************************************************************************
-************************************************************************************/
-
-typedef enum smacMessageDefs_tag
-{
- gMcpsDataReq_c,
- gMcpsDataCnf_c,
- gMcpsDataInd_c,
-
- gMcpsIndQueueInsertReq_c,
- gMcpsIndQueueInsertCnf_c,
- gMcpsIndQueueRemoveReq_c,
-
- gMlmeCcaReq_c,
- gMlmeCcaCnf_c,
-
- gMlmeEdReq_c,
- gMlmeEdCnf_c,
-
- gMlmeSetTRxStateReq_c,
- gMlmeSetTRxStateCnf_c,
-
- gMlmeSetReq_c,
- gMlmeSetCnf_c,
-
- gMlmeGetReq_c,
- gMlmeGetCnf_c,
-
- gMlmeTimeoutInd_c,
-
- gMlme_StartEventInd_c,
- gMlme_SyncLossInd_c,
- gMlme_RxSfdDetectInd_c,
- gMlme_FilterFailInd_c,
- gMlme_UnexpectedRadioResetInd_c,
-}smacMessageDefs_t;
-
-typedef uint64_t smacTime_t;
-
-typedef struct smacPdu_tag
-{
- uint8_t smacPdu[1];
-}smacPdu_t;
-
-typedef PACKED_STRUCT smacHeader_tag
-{
- uint16_t frameControl;
- uint8_t seqNo;
- uint16_t panId;
- uint16_t destAddr;
- uint16_t srcAddr;
-}smacHeader_t;
-
-typedef struct txPacket_tag
-{
- uint8_t u8DataLength;
- smacHeader_t smacHeader;
- smacPdu_t smacPdu;
-}txPacket_t;
-
-typedef struct txContextConfig_tag
-{
- bool_t ccaBeforeTx;
- bool_t autoAck;
- uint8_t retryCountCCAFail;
- uint8_t retryCountAckFail;
-}txContextConfig_t;
-
-typedef enum rxStatus_tag
-{
- rxInitStatus,
- rxProcessingReceptionStatus_c,
- rxSuccessStatus_c,
- rxTimeOutStatus_c,
- rxAbortedStatus_c,
- rxMaxStatus_c
-} rxStatus_t;
-
-typedef struct rxPacket_tag
-{
- uint8_t u8MaxDataLength;
- rxStatus_t rxStatus;
- uint8_t u8DataLength;
- smacHeader_t smacHeader;
- smacPdu_t smacPdu;
-}rxPacket_t;
-
-typedef enum txStatus_tag
-{
- txSuccessStatus_c,
- txFailureStatus_c,
- txMaxStatus_c
-} txStatus_t;
-
-typedef enum smacErrors_tag
-{
- gErrorNoError_c = 0,
- gErrorBusy_c,
- gErrorChannelBusy_c,
- gErrorNoAck_c,
- gErrorOutOfRange_c,
- gErrorNoResourcesAvailable_c,
- gErrorNoValidCondition_c,
- gErrorCorrupted_c,
- gErrorMaxError_c
-} smacErrors_t;
-
-#if defined (gPHY_802_15_4g_d)
-
-typedef enum smacRFModes_tag
-{
- gRFMode1_c = gPhyMode1_c,
- gRFMode2_c = gPhyMode2_c,
- gRFMode3_c = gPhyMode3_c,
- gRFMode4_c = gPhyMode4_c,
- gRFMode5_c = gPhyMode1ARIB_c, /*ARIB mode 1*/
- gRFMode6_c = gPhyMode2ARIB_c, /*ARIB mode 2*/
- gRFMaxMode_c
-} smacRFModes_t;
-
-typedef enum smacFrequencyBands_tag
-{
- gSMAC_863_870MHz_c = gFreq863__870MHz_c, /* 863-870 (Europe) */
- gSMAC_902_928MHz_c = gFreq902__928MHz_c, /* 902-928 (US) */
- gSMAC_920_928MHz_c = gFreq920__928MHz_c, /* 920-928 (Japan) */
- gSMAC_169_400__169_475MHz_c = gFreq169_400__169_475MHz_c /* 169-475 */
-}smacFrequencyBands_t;
-
-#endif
-typedef struct smacPacket_tag
-{
- uint8_t u8SyncWordSize;
- uint8_t *u8SyncWordValue;
- uint16_t u16PreambleLength;
-}smacPacket_t;
-
-typedef enum scanModes_tag
-{
- gScanModeCCA_c = 0,
- gScanModeED_c,
- gMaxScanMode_c
-} scanModes_t;
-
-#if defined (gPHY_802_15_4g_d)
-
-typedef struct packetConfig_tag
-{
- uint16_t u16PreambleSize;
- uint8_t u8SyncWordSize;
- uint8_t *pu8SyncWord;
-} packetConfig_t;
-
-#endif
-
-/*@CMA, Connectivity Test_Start*/
-typedef enum channels_tag
-{
-#include "SMAC_Channels.h"
-} channels_t;
-
-typedef enum smacTestMode_tag
-{
- gTestModeForceIdle_c = 0,
- gTestModeContinuousTxModulated_c,
- gTestModeContinuousTxUnmodulated_c,
- gTestModePRBS9_c,
- gTestModeContinuousRxBER_c,
- gMaxTestMode_c
-} smacTestMode_t;
-
-typedef struct smacDataCnf_tag
-{
- smacErrors_t status;
-} smacDataCnf_t;
-
-typedef struct smacDataInd_tag
-{
- //phyTimeTimestamp_t timeStamp;
- uint8_t ppduLinkQuality;
- uint8_t u8LastRxRssi;
- rxPacket_t * pRxPacket;
-} smacDataInd_t;
-
-typedef struct smacEdReq_tag
-{
- channels_t scanChannel;
- smacTime_t startTime; // absolute
-} smacEdReq_t;
-
-typedef struct smacCcaReq_tag
-{
- scanModes_t ccaType;
-} smacCcaReq_t;
-
-typedef struct smacCcaCnf_tag
-{
- smacErrors_t status;
-} smacCcaCnf_t;
-
-typedef struct smacEdCnf_tag
-{
- smacErrors_t status;
- uint8_t energyLevel;
- uint8_t energyLeveldB;
- channels_t scannedChannel;
-} smacEdCnf_t;
-
-typedef struct smacToAppMlmeMessage_tag
-{
- smacMessageDefs_t msgType;
- uint8_t appInstanceId;
- union
- {
- smacCcaCnf_t ccaCnf;
- smacEdCnf_t edCnf;
- }msgData;
-} smacToAppMlmeMessage_t;
-
-typedef struct smacToAppDataMessage_tag
-{
- smacMessageDefs_t msgType;
- uint8_t appInstanceId;
- union
- {
- smacDataCnf_t dataCnf;
- smacDataInd_t dataInd;
- }msgData;
-} smacToAppDataMessage_t;
-
-typedef smacErrors_t ( * SMAC_APP_MCPS_SapHandler_t)(smacToAppDataMessage_t * pMsg, instanceId_t instanceId);
-
-typedef smacErrors_t ( * SMAC_APP_MLME_SapHandler_t)(smacToAppMlmeMessage_t * pMsg, instanceId_t instanceId);
-
-/************************************************************************************
-*************************************************************************************
-* External Prototypes
-*************************************************************************************
-************************************************************************************/
-extern void InitSmac(void);
-
-/***********************************************************************************
-* Smac_RegisterSapHandlers
-* This function registers the data and management components callbacks to the application
-* After calling this function and providing two function pointers, SMAC will call
-* one of these two, for each async request, based on request type (data or management)
-*
-* Interface assumptions:
-* The SMAC and radio driver have been initialized and are ready to be used.
-*
-* Return value:
-* None
-************************************************************************************/
-extern void Smac_RegisterSapHandlers(SMAC_APP_MCPS_SapHandler_t pSMAC_APP_MCPS_SapHandler,
- SMAC_APP_MLME_SapHandler_t pSMAC_APP_MLME_SapHandler,
- instanceId_t smacInstanceId);
-
-/***********************************************************************************
-* App to Smac SAP HANDLERS
-************************************************************************************/
-//smacErrors_t AppToSmac_Data_SapHandler(AppToSmacDataMessage_t* pMsg, uint8_t MACInstance);
-//smacErrors_t AppToSmac_Mlme_SapHandler(AppToSmacMlmeMessage_t* pMsg, uint8_t MACInstance);
-/***********************************************************************************/
-
-/******************************** SMAC Data primitives *****************************/
-/***********************************************************************************/
-
-/************************************************************************************
-* MCPSDataRequest
-*
-* This data primitive is used to send an over the air packet. This is an asyncronous
-* function, it means it ask SMAC to transmit one OTA packet, but when the function
-* returns it is not sent already.
-*
-* Interface assumptions:
-* The SMAC and radio driver have been initialized and are ready to be used.
-*
-* Return value:
-* gErrorNoError_c: Everything is ok and the transmission will be performed.
-* gErrorOutOfRange_c: One of the members in the pTxMessage structure is out of
-* range (no valid bufer size or data buffer pointer is NULL)
-* gErrorNoResourcesAvailable_c: the radio is performing another action.
-* gErrorNoValidCondition_c: The SMAC has not been initialized
-*
-************************************************************************************/
-extern smacErrors_t MCPSDataRequest(txPacket_t *psTxPacket);
-
-
-/************************************************************************************
-* MLMEConfigureTxContext
-*
-* This management primitive sets up the transmission conditions used by MCPSDataRequest
-*
-* Interface assumptions:
-* SMAC is initialized
-*
-* Return value:
-* gErrorNoError_c: Everything is set accordingly.
-* gErrorOutOfRange_c: More than gMaxRetriesAllowed_c are required
-* gErrorNoValidCondition_c: Retries are required but neither Ack nor CCA are requested
-*
-************************************************************************************/
-extern smacErrors_t MLMEConfigureTxContext(txContextConfig_t* pTxConfig);
-/************************************************************************************
-* MLMERXEnableRequest
-*
-* Function used to place the radio into receive mode
-*
-* Interface assumptions:
-* The SMAC and radio driver have been initialized and are ready to be used.
-*
-* Arguments:
-*
-* rxPacket_t *gsRxPacket: Pointer to the structure where the reception results will be stored.
-* smacTime_t stTimeout: 64-bit timeout value, absolute time in symbols
-*
-* Return Value:
-* gErrorNoError_c: Everything is ok and the reception will be performed.
-* gErrorOutOfRange_c: One of the members in the pRxMessage structure is out of range (no valid bufer size or data buffer pointer is NULL).
-* gErrorBusy_c: the radio is performing another action.
-* gErrorNoValidCondition_c: The SMAC has not been initialized.
-*************************************************************************************/
-extern smacErrors_t MLMERXEnableRequest(rxPacket_t *gsRxPacket, smacTime_t stTimeout);
-
-
-/************************************************************************************
-* MLMERXDisableRequest
-*
-* Returns the radio to idle mode from receive mode.
-*
-* Interface assumptions:
-* The SMAC and radio driver have been initialized and are ready to be used.
-*
-* Arguments:
-* None
-*
-* Return Value:
-* gErrorNoValidCondition_c If the Radio is not in Rx state.
-* gErrorNoError_c When the message was aborted or disabled.
-*************************************************************************************/
-extern smacErrors_t MLMERXDisableRequest(void);
-
-/************************************************************************************
-* MLMELinkQuality
-*
-* This function returns an integer value that is the link quality from the last received
-* packet of the form: dBm = (-Link Quality/2).
-*
-* Interface assumptions:
-* The SMAC and radio driver have been initialized and are ready to be used.
-*
-* Arguments:
-* None
-*
-* Return Value:
-* uint8_t: 8 bit value representing the link quality value in dBm.
-* Returns the result in smacLastDataRxParams.linkQuality.
-*************************************************************************************/
-extern uint8_t MLMELinkQuality(void);
-
-/************************************************************************************
-* MLMESetInterPacketRxDelay
-*
-* This sets the inter packet delay for the packet handler
-*
-* Interface assumptions:
-* The SMAC and radio driver have been initialized and are ready to be used.
-*
-* Arguments:
-* uint8_t u8InterPacketRxDelay: interpacket delay in ms
-*
-* Return Value:
-* gErrorNoValidCondition_c If the Radio is not in Rx state.
-* gErrorNoError_c When the message was aborted or disabled.
-*
-*************************************************************************************/
-#if defined(gPHY_802_15_4g_d)
-extern smacErrors_t MLMESetInterPacketRxDelay(uint8_t u8InterPacketRxDelay);
-#endif
-
-/***********************************************************************************/
-/******************************** SMAC Radio primitives ****************************/
-/***********************************************************************************/
-
-/************************************************************************************
-* MLMESetChannelRequest
-*
-* This sets the frequency on which the radio will transmit or receive on.
-*
-* Interface assumptions:
-* The SMAC and radio driver have been initialized and are ready to be used.
-*
-* Arguments:
-* channels_t newChannel: channel to be set
-*
-* Return Value:
-* gErrorNoError_c: The channel set has been performed
-* gErrorOutOfRange_c : channel requested is not valid
-* gErrorBusy_c: when SMAC is busy in other radio activity as transmitting or receiving data. Or performing a channel scan.
-*************************************************************************************/
-extern smacErrors_t MLMESetChannelRequest (channels_t newChannel);
-
-#ifdef gIncludeCalibrationOption
-/************************************************************************************
-* MLMESetAdditionalRFOffset
-*
-* This sets the frequency offset in respect to the current channel. Used for calibration.
-*
-* Interface assumptions:
-* The SMAC and radio driver have been initialized and are ready to be used.
-*
-* Arguments:
-* uint32_t additionalRFOffset: offset used in frequency Calculation
-*
-* Return Value:
-* gErrorNoError_c: The PIB is set
-* gErrorNoValidCondition_c: SMAC is not initialized
-*************************************************************************************/
-extern smacErrors_t MLMESetAdditionalRFOffset (uint32_t additionalRFOffset);
-
-/************************************************************************************
-* MLMEGetAdditionalRFOffset
-*
-* This gets the frequency offset in respect to the current channel. Used for calibration.
-*
-* Interface assumptions:
-* The SMAC and radio driver have been initialized and are ready to be used.
-*
-* Arguments:
-* None
-*
-* Return Value:
-* calibration offset
-*************************************************************************************/
-extern uint32_t MLMEGetAdditionalRFOffset( void );
-
-#endif
-/************************************************************************************
-* MLMEGetChannelRequest
-*
-* This function returns the current channel, if an error is detected it returns gChannelOutOfRange_c.
-*
-* Interface assumptions:
-* The SMAC and radio driver have been initialized and are ready to be used.
-*
-* Arguments:
-* None
-*
-* Return Value:
-* channels_t (uint8_t): The current RF channel.
-* gChannelOutOfRange_c: If current channel could not be detected
-*************************************************************************************/
-extern channels_t MLMEGetChannelRequest(void);
-
-
-/************************************************************************************
-* MLMERssi
-*
-* This call starts an energy detect (ED) cycle and returns the energy value (-power/2)
-* via the returned argument. For example, if the Energy Detect returns 80 then the
-* interpreted value is -80/2 or -40 dBm
-*
-* Interface assumptions:
-* The SMAC and radio driver have been initialized and are ready to be used.
-*
-* Arguments:
-* None
-*
-* Return Value:
-* uint8_t: An unsigned 8-bit value representing the energy on the current channel.
-*************************************************************************************/
-#if defined(gPHY_802_15_4g_d)
-extern uint8_t MLMERssi(void);
-#endif
-
-/************************************************************************************
-* MLMESetCCADuration
-*
-* This call sets the amount of time necessary to perform CCA or ED
-* Interface assumptions:
-* The SMAC and radio driver have been initialized and are ready to be used.
-*
-* Arguments:
-* uint64_t usCCADuration: duration in microseconds
-*
-* Return Value:
-* gErrorNoError_c in case of success, error code otherwise.
-*************************************************************************************/
-#if defined(gPHY_802_15_4g_d)
-extern smacErrors_t MLMESetCCADuration(uint64_t usCCADuration );
-#endif
-/************************************************************************************
-* MLMEPacketConfig
-*
-* This function sets the following parameters for OTA packets in radio�s registers:
-* Preamble size, synchronization word size, and synchronization word value.
-*
-* Interface assumptions:
-* The SMAC and radio driver have been initialized and are ready to be used.
-*
-* Arguments:
-* packetConfig_t *pPacketCfg
-*
-* Return Value:
-* gErrorBusy_c: when SMAC is busy in other radio activity as transmitting or receiving data.
-* Or performing a channel scan.
-* gErrorNoError_c: the packet has been configured
-*************************************************************************************/
-#if defined(gPHY_802_15_4g_d)
-extern smacErrors_t MLMEPacketConfig(packetConfig_t *pPacketCfg);
-#endif
-/************************************************************************************
-* MLMERadioInit
-*
-* This function initializes the Radio parameters.
-*
-* Interface assumptions:
-* None
-*
-* Arguments:
-* None
-*
-* Return Value:
-* gErrorNoError_c: the Radio initialization has been done successfully
-*************************************************************************************/
-#if defined(gPHY_802_15_4g_d)
-extern smacErrors_t MLMERadioInit(void);
-#endif
-/************************************************************************************
-* MLMEPhySoftReset
-*
-* This function performs a software reset on the radio, PHY and SMAC state machines.
-*
-* Interface assumptions:
-* None
-*
-* Arguments:
-* None
-*
-* Return Value:
-* gErrorNoError_c: If the action is performed.
-*************************************************************************************/
-#ifdef __cplusplus
-extern "C" {
-#endif
-smacErrors_t MLMEPhySoftReset(void);
-
-#ifdef __cplusplus
-} //extern "C"
-#endif
-
-/************************************************************************************
-* MLMEPAOutputAdjust
-*
-*
-*************************************************************************************/
-extern smacErrors_t MLMEPAOutputAdjust(uint8_t u8PaValue);
-
-/************************************************************************************
-* MLMESetPreambleLength
-*
-*
-*************************************************************************************/
-#if defined(gPHY_802_15_4g_d)
-extern smacErrors_t MLMESetPreambleLength(uint16_t u16preambleLength);
-#endif
-/************************************************************************************
-* MLMESetSyncWordValue
-*
-*
-*************************************************************************************/
-#if defined(gPHY_802_15_4g_d)
-extern smacErrors_t MLMESetSyncWordValue(uint8_t *u8syncWordValue);
-#endif
-/************************************************************************************
-* MLMESetSyncWordSize
-*
-*
-*************************************************************************************/
-#if defined(gPHY_802_15_4g_d)
-extern smacErrors_t MLMESetSyncWordSize(uint8_t u8syncWordSize);
-#endif
-/************************************************************************************
-* MLMESetFreqBand
-*
-*
-*
-************************************************************************************/
-#if defined(gPHY_802_15_4g_d)
-extern smacErrors_t MLMESetFreqBand(smacFrequencyBands_t freqBand, smacRFModes_t phyMode);
-#endif
-/************************************************************************************
-* MLMESetPhyMode
-*
-*
-*
-************************************************************************************/
-#if defined(gPHY_802_15_4g_d)
-extern smacErrors_t MLMESetPhyMode(smacRFModes_t phyMode);
-#endif
-/***********************************************************************************/
-/***************************** SMAC Management primitives **************************/
-/***********************************************************************************/
-
-/************************************************************************************
-* MLMEScanRequest
-*
-* This function scans the channel passed as parameter using CCA or ED mode
-* returns the RSSI in that channel.
-*
-* Interface assumptions:
-* The SMAC and radio driver have been initialized and are ready to be used.
-*
-* Arguments:
-* channels_t u8ChannelToScan: channel to scan
-* uint8_t *u8ChannelScanResult: to return the RSSI value
-*
-* Return Value:
-* gErrorNoError_c: If the action was performed correctly.
-* gErrorBusy_c: If SMAC is busy.
-*************************************************************************************/
-extern smacErrors_t MLMEScanRequest(channels_t u8ChannelToScan);
-
-/*@CMA, Conn Test Added*/
-/************************************************************************************
-* MLMECcaRequest
-*
-* This function performs Clear Channel Assessment on the active channel
-*
-* Return value:
-* gErrorNoError_c: SMAC will perform Cca
-* gErrorBusy_c: SMAC is busy
-************************************************************************************/
-extern smacErrors_t MLMECcaRequest(void);
-
-/************************************************************************************
-* MLMETXDisableRequest
-*
-* Returns the radio to idle mode from Tx mode.
-*
-************************************************************************************/
-extern void MLMETXDisableRequest(void);
-
-/***********************************************************************************
-******************************** SMAC MCU primitives *******************************
-***********************************************************************************/
-
-/************************************************************************************
-*SMAC auxiliary functions
-*************************************************************************************/
-
-/************************************************************************************
-*SMACFillHeader
-*This is a replacement for the u8DestAddress in the txPacket_t structure
-*To set the destination address simply call this function with a pointer to
-*txPacket->smacHeader and a uint16_t variable resembling the address.
-*Also, to change the default source address and panID, modify gDefaultPanID_c and
-*gNodeAddress_c from SMAC_Config.h or call SMACSetShortSrcAddress and SMACSetPanID.
-*************************************************************************************/
-extern void SMACFillHeader(smacHeader_t* pSmacHeader, uint16_t destAddr);
-
-/***********************************************************************************/
-extern smacErrors_t SMACSetShortSrcAddress(uint16_t nwShortAddress);
-
-/***********************************************************************************/
-extern smacErrors_t SMACSetPanID(uint16_t nwShortPanID);
-
-/***********************************************************************************/
-
-
-
-#endif /* SMAC_INTERFACE_H_ */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/fsl_phy_mcr20a.lib Tue Aug 18 12:52:15 2015 +0000 @@ -0,0 +1,1 @@ +http://developer.mbed.org/teams/Freescale/code/fsl_phy_mcr20a/#764779eedf2d
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/fsl_smac.lib Tue Aug 18 12:52:15 2015 +0000 @@ -0,0 +1,1 @@ +http://developer.mbed.org/teams/Freescale/code/fsl_smac/#401ba973869e
--- a/mbed-rtos.lib Fri Jul 31 13:49:46 2015 +0000 +++ b/mbed-rtos.lib Tue Aug 18 12:52:15 2015 +0000 @@ -1,1 +1,1 @@ -http://mbed.org/users/mbed_official/code/mbed-rtos/#a21475017ae2 +http://mbed.org/users/mbed_official/code/mbed-rtos/#21b438192b0f
--- a/mbed.bld Fri Jul 31 13:49:46 2015 +0000 +++ b/mbed.bld Tue Aug 18 12:52:15 2015 +0000 @@ -1,1 +1,1 @@ -http://mbed.org/users/mbed_official/code/mbed/builds/da0ca467f8b5 \ No newline at end of file +http://mbed.org/users/mbed_official/code/mbed/builds/b9ad9a133dc7 \ No newline at end of file