NXP
A library implementing IEEE 802.15.4 PHY functionality for the MCR20A transceiver. The PHY sublayer provides two services: the PHY data service and the PHY management service interfacing to the PHY sublayer management entity (PLME) service access point (SAP) (known as PLME-SAP). The PHY data service enables the transmission and reception of PHY protocol data units (PSDUs) over the media (radio).
Fork of
fsl_phy_mcr20a
by 
Freescale
The Freescale PHY Layer deals with the physical burst which is to be sent and/or received. It performs modulation and demodulation, transmitter and receiver switching, fragmentation, scrambling, interleaving, and error correction coding. The communication to the upper protocol layers is carried out through the Layer 1 Interface.
The PHY Layer is capable of executing the following sequences:
- I (Idle)
- R (Receive Sequence conditionally followed by a TxAck)
- T (Transmit Sequence)
- C (Standalone CCA)
- CCCA (Continuous CCA)
- TR (Transmit/Receive Sequence - transmit unconditionally followed by either an R or RxAck)
In addition to these sequences the PHY Layer also integrates a packet processor which determines whether the packet is MAC-compliant, and if it is, whether it is addressed to the end device. Another feature of the packet processor is Source Address Matching which can be viewed as an extension of packet filtering; however its function is very specific to its intended application (data-polling and indirect queue management by a PAN Coordinator).
Documentation
Diff: MemManager/Interface/MemManager.h
- Revision:
- 0:764779eedf2d
diff -r 000000000000 -r 764779eedf2d MemManager/Interface/MemManager.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/MemManager/Interface/MemManager.h Tue Aug 18 12:41:42 2015 +0000
@@ -0,0 +1,198 @@
+/*!
+* Copyright (c) 2015, Freescale Semiconductor, Inc.
+* All rights reserved.
+*
+* \file MemManager.h
+* This is the header file for the Memory Manager interface.
+*
+* Redistribution and use in source and binary forms, with or without modification,
+* are permitted provided that the following conditions are met:
+*
+* o Redistributions of source code must retain the above copyright notice, this list
+* of conditions and the following disclaimer.
+*
+* o Redistributions in binary form must reproduce the above copyright notice, this
+* list of conditions and the following disclaimer in the documentation and/or
+* other materials provided with the distribution.
+*
+* o Neither the name of Freescale Semiconductor, Inc. nor the names of its
+* contributors may be used to endorse or promote products derived from this
+* software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
+* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+#ifndef _MEM_MANAGER_H_
+#define _MEM_MANAGER_H_
+
+/*! *********************************************************************************
+*************************************************************************************
+* Include
+*************************************************************************************
+********************************************************************************** */
+#include "EmbeddedTypes.h"
+#include "GenericList.h"
+#include "MemManagerConfig.h"
+
+
+/*! *********************************************************************************
+*************************************************************************************
+* Public macros
+*************************************************************************************
+********************************************************************************** */
+/*Defines pools by block size and number of blocks. Must be alligned to 4 bytes.*/
+#ifndef PoolsDetails_c
+#define PoolsDetails_c \
+ _block_size_ 64 _number_of_blocks_ 8 _eol_ \
+ _block_size_ 128 _number_of_blocks_ 2 _eol_ \
+ _block_size_ 256 _number_of_blocks_ 6 _eol_
+#endif
+
+
+/*! *********************************************************************************
+*************************************************************************************
+* Private type definitions
+*************************************************************************************
+********************************************************************************** */
+/*Defines statuses used in MEM_BufferAlloc and MEM_BufferFree*/
+typedef enum
+{
+ MEM_SUCCESS_c = 0, /* No error occurred */
+ MEM_INIT_ERROR_c, /* Memory initialization error */
+ MEM_ALLOC_ERROR_c, /* Memory allocation error */
+ MEM_FREE_ERROR_c, /* Memory free error */
+ MEM_UNKNOWN_ERROR_c /* something bad has happened... */
+}memStatus_t;
+
+
+/*! *********************************************************************************
+*************************************************************************************
+* Public prototypes
+*************************************************************************************
+********************************************************************************** */
+#ifdef __cplusplus
+extern "C" {
+#endif
+/*Initialises the Memory Manager.*/
+memStatus_t MEM_Init(void);
+/*Returns the number of available blocks that fit the given size.*/
+uint32_t MEM_GetAvailableBlocks(uint32_t size);
+/*Frees the givem buffer.*/
+memStatus_t MEM_BufferFree(void* buffer);
+/*Returns the allocated buffer of the given size.*/
+void* MEM_BufferAlloc(uint32_t numBytes);
+/*Returns the size of a given buffer*/
+uint16_t MEM_BufferGetSize(void* buffer);
+/*Performs a write-read-verify test accross all pools*/
+uint32_t MEM_WriteReadTest(void);
+#ifdef __cplusplus
+}//extern "C"
+#endif
+
+/*! *********************************************************************************
+*************************************************************************************
+* Private macros
+*************************************************************************************
+********************************************************************************** */
+#if defined(MEM_TRACKING) && defined(DEBUG_ASSERT)
+#define MEM_ASSERT(condition) if(!(condition))while(1);
+#else
+#define MEM_ASSERT(condition) (void)(condition);
+#endif
+
+
+/*! *********************************************************************************
+*************************************************************************************
+* Private type definitions
+*************************************************************************************
+********************************************************************************** */
+
+#ifdef MEM_STATISTICS
+/*Statistics structure definition. Used by pools.*/
+typedef struct poolStat_tag
+ {
+ uint16_t numBlocks;
+ uint16_t allocatedBlocks;
+ uint16_t allocatedBlocksPeak;
+ uint16_t allocationFailures;
+ uint16_t freeFailures;
+#ifdef MEM_TRACKING
+ uint16_t poolFragmentWaste;
+ uint16_t poolFragmentWastePeak;
+#endif /*MEM_TRACKING*/
+ } poolStat_t;
+#endif /*MEM_STATISTICS*/
+
+#ifdef MEM_TRACKING
+/*Definition for alloc indicators. Used in buffer tracking.*/
+typedef enum
+{
+ MEM_TRACKING_FREE_c = 0,
+ MEM_TRACKING_ALLOC_c,
+}memTrackingStatus_t;
+
+/*Tracking structure definition.*/
+typedef struct BlockTracking_tag
+{
+ void *blockAddr; /*Addr of Msg, not that this pointer is
+ 4 byte bigger than the addr in the pool
+ has the header of the msg is 4 bytes */
+ uint16_t blockSize; /*Size of block in bytes.*/
+ uint16_t fragmentWaste; /*Size requested by allocator.*/
+ void *allocAddr; /*Return address of last Alloc made */
+ void *freeAddr; /*Return address of last Free made */
+ uint16_t allocCounter; /*No of time this msg has been allocated */
+ uint16_t freeCounter; /*No of time this msg has been freed */
+ memTrackingStatus_t allocStatus; /*1 if currently allocated, 0 if currently free */
+ // uint8_t padding;
+}blockTracking_t;
+#endif /*MEM_TRACKING*/
+
+/*Header description for buffers.*/
+typedef struct listHeader_tag
+{
+ listElement_t link;
+ struct pools_tag *pParentPool;
+}listHeader_t;
+
+/*Buffer pools. Used by most functions*/
+typedef struct pools_tag
+{
+ list_t anchor; /* MUST be first element in pools_t struct */
+ uint16_t nextBlockSize;
+ uint16_t blockSize;
+#ifdef MEM_STATISTICS
+ poolStat_t poolStatistics;
+ uint8_t padding[2];
+#endif /*MEM_STATISTICS*/
+}pools_t;
+
+/*Buffer pool description. Used by MM_Init() for creating the buffer pools. */
+typedef struct poolInfo_tag
+{
+ uint16_t blockSize;
+ uint16_t poolSize;
+ /* uint8_t padding[2]; */
+}poolInfo_t;
+
+/*! *********************************************************************************
+*************************************************************************************
+* Private prototypes
+*************************************************************************************
+********************************************************************************** */
+
+#ifdef MEM_TRACKING
+uint8_t MEM_Track(listHeader_t *block, memTrackingStatus_t alloc, uint32_t address, uint16_t requestedSize);
+uint8_t MEM_BufferCheck(uint8_t *p, uint32_t size);
+#endif /*MEM_TRACKING*/
+
+#endif /* _MEM_MANAGER_H_ */