You are viewing an older revision! See the latest version
music visualizer
Team Members¶
Section A - Joo Won Lee
Section B - Shlok Patel
Description¶
Schematic¶
Parts Needed¶
- One Mbed LPC1768
- Five 8-LED WS2812b WRGB LED Strips
- Sparkfun MicroSD Breakout Board
- Adafruit SPW 2430 MEMS Microphone
- Adafruit Bluefruit LE UART Friend
- Sparkfun TPA2005D1 Class D Audio Amp
- PCB Mount Speaker
- DC Barrel Jack
- 5V/2A AC to DC Power Adapter
Wiring¶
WS2812b WRGB LED Strips¶
These LED Strips are chained together, with the output end of one strip connected to the input side of the next strip. Additionally, a 330Ω Resistor is placed in series between mbed VOUT and LED strip 4-7VDC to prevent any issues from voltage spikes.
| mbed | LED Strips |
|---|---|
| GND | GND |
| P21 | DIN |
| VOUT (3.3v) | 4-7VDC |
| GND | GND |
MicroSD Breakout¶
| mbed | MicroSD Breakout |
|---|---|
| p8 | CS |
| p5 | DI |
| VOUT (3.3v) | VCC |
| p7 | SCK |
| GND | GND |
| p6 | DO |
| CD |
MEMS Microphone¶
| mbed | MEMS | 10uf decoupling capacitor |
|---|---|---|
| GND | GND | - |
| VU (5v) | Vin | + |
| p16 | DC |
Adafruit BLE Friend¶
| mbed | Adafruit BLE |
|---|---|
| GND | GND |
| VU (5v) | VIN (3.3-16V) |
| nc | RTS |
| GND | CTS |
| p27 (Serial RX) | TXO |
| p28 (Serial TX) | RXI |
Class D Audio Amp + Speaker¶
| mbed | TPA2005D1 | Speaker |
|---|---|---|
| GND | PWR -, IN - | |
| Vout (3.3v) or 5V | PWR + | |
| p18 | IN + | |
| OUT + | + | |
| OUT - | - | |
| pX | S |