MultiTech / libmDot-dev-mbed5-deprecated

Bleeding edge development version of the mDot library for mbed 5. This version of the library is not guaranteed to be stable or well tested and should not be used in production or deployment scenarios.

Dependents:   mDot-IKS01A1 mDot-IKS01A1 mDot-Examples mDot-IKS01A1-Explora ... more

Fork of libmDot-dev-mbed2-deprecated by MultiTech

The Dot library provides a LoRaWan certified stack for LoRa communication using MultiTech mDot and xDot devices. The stack is compatible with mbed 5.

Dot Library Version 3 Updates

Dot Library versions 3.x.x require a channel plan to be injected into the stack. Channel plans are included with the 3.x.x Dot Library releases. The following code snippet demonstrates how to create a channel plan and inject it into the stack.

#include "mDot.h"
#include "channel_plans.h"

int main() {
    ChannelPlan* plan = new lora::ChannelPlan_US915();
    assert(plan);
    mDot* dot = mDot::getInstance(plan);
    assert(dot);

    // ...
}

Dot devices must not be deployed with software using a different channel plan than the Dot's default plan! This functionality is for development and testing only!

Multicast Sessions

Multicast sessions and packet rx events in library. When in Class C mode Multicast downlinks can be received. Recieved packets should be filtered on address, counter value will be maintained in the session or can be set explicitly depending on Application support to share Multicast Address, Keys and Counters.

mDot.h

        /**
         * Add a multicast session address and keys
         * Downlink counter is set to 0
         * Up to 3 MULTICAST_SESSIONS can be set
         */
        int32_t setMulticastSession(uint8_t index, uint32_t addr, const uint8_t* nsk, const uint8_t* dsk);
 
        /**
         * Set a multicast session counter
         * Up to 3 MULTICAST_SESSIONS can be set
         */
        int32_t setMulticastDownlinkCounter(uint8_t index, uint32_t count);

mDotEvent.h

The address field was added to PacketRx event.

        virtual void PacketRx(uint8_t port, uint8_t *payload, uint16_t size, int16_t rssi, int8_t snr, lora::DownlinkControl ctrl, uint8_t slot, uint8_t retries, uint32_t address);

The name of the repository can be used to determine which device the stack was compiled for and if it's a development or production-ready build:

A changelog for the Dot library can be found here.

The Dot library version and the version of mbed-os it was compiled against can both be found in the commit message for that revision of the Dot library. Building your application with the same version of mbed-os as what was used to build the Dot library is highly recommended!

The Dot-Examples repository demonstrates how to use the Dot library in a custom application.

The mDot and xDot platform pages have lots of platform specific information and document potential issues, gotchas, etc, and provide instructions for getting started with development. Please take a look at the platform page before starting development as they should answer many questions you will have.

README.txt@1:9f30fbe9e9c1, 2015-06-24 (annotated)

Committer:
Mike Fiore
Date:
Wed Jun 24 17:03:08 2015 -0500
Revision:
1:9f30fbe9e9c1
Child:
2:6385bf37bfe7
add README, LICENSE, headers, and library - from git tag mbed_24June2015

Who changed what in which revision?

UserRevisionLine numberNew contents of line
Mike Fiore 1:9f30fbe9e9c1 1 ---------------------------------------
Mike Fiore 1:9f30fbe9e9c1 2 Getting Started with the mDot Library
Mike Fiore 1:9f30fbe9e9c1 3 ---------------------------------------
Mike Fiore 1:9f30fbe9e9c1 4
Mike Fiore 1:9f30fbe9e9c1 5 This README should get you started using the mDot library with your MultiTech mDot.
Mike Fiore 1:9f30fbe9e9c1 6
Mike Fiore 1:9f30fbe9e9c1 7 License information can be found in the accompanying LICENSE file.
Mike Fiore 1:9f30fbe9e9c1 8
Mike Fiore 1:9f30fbe9e9c1 9 The mDot header has documentation for all the public functions that will be useful to consumers of
Mike Fiore 1:9f30fbe9e9c1 10 the library.
Mike Fiore 1:9f30fbe9e9c1 11
Mike Fiore 1:9f30fbe9e9c1 12 The following source code provides an example application which configures the mDot, connects to a
Mike Fiore 1:9f30fbe9e9c1 13 MultiTech Conduit gateway with matching configuration, and sends data packets to the gateway.
Mike Fiore 1:9f30fbe9e9c1 14
Mike Fiore 1:9f30fbe9e9c1 15 /**************
Mike Fiore 1:9f30fbe9e9c1 16 SAMPLE CODE
Mike Fiore 1:9f30fbe9e9c1 17 **************/
Mike Fiore 1:9f30fbe9e9c1 18
Mike Fiore 1:9f30fbe9e9c1 19 #include "mbed.h"
Mike Fiore 1:9f30fbe9e9c1 20 #include "mDot.h"
Mike Fiore 1:9f30fbe9e9c1 21 #include <string>
Mike Fiore 1:9f30fbe9e9c1 22 #include <vector>
Mike Fiore 1:9f30fbe9e9c1 23
Mike Fiore 1:9f30fbe9e9c1 24 // these options must match the settings on your Conduit in
Mike Fiore 1:9f30fbe9e9c1 25 // /var/config/lora/lora-network-server.conf
Mike Fiore 1:9f30fbe9e9c1 26 static std::string config_network_name = "my_lora_network";
Mike Fiore 1:9f30fbe9e9c1 27 static std::string config_network_pass = "my_network_password";
Mike Fiore 1:9f30fbe9e9c1 28 static uint8_t config_frequency_sub_band = 1;
Mike Fiore 1:9f30fbe9e9c1 29
Mike Fiore 1:9f30fbe9e9c1 30 void log_error(mDot* dot, const char* msg, int32_t retval);
Mike Fiore 1:9f30fbe9e9c1 31
Mike Fiore 1:9f30fbe9e9c1 32 int main() {
Mike Fiore 1:9f30fbe9e9c1 33 int32_t ret;
Mike Fiore 1:9f30fbe9e9c1 34 mDot* dot;
Mike Fiore 1:9f30fbe9e9c1 35 std::vector<uint8_t> data;
Mike Fiore 1:9f30fbe9e9c1 36 std::string data_str = "hello world!";
Mike Fiore 1:9f30fbe9e9c1 37
Mike Fiore 1:9f30fbe9e9c1 38 // get a mDot handle
Mike Fiore 1:9f30fbe9e9c1 39 dot = mDot::getInstance();
Mike Fiore 1:9f30fbe9e9c1 40
Mike Fiore 1:9f30fbe9e9c1 41 // reset to default config so we know what state we're in
Mike Fiore 1:9f30fbe9e9c1 42 dot->resetConfig();
Mike Fiore 1:9f30fbe9e9c1 43
Mike Fiore 1:9f30fbe9e9c1 44 // print library version information
Mike Fiore 1:9f30fbe9e9c1 45 printf("version: %s\r\n", dot->getId().c_str());
Mike Fiore 1:9f30fbe9e9c1 46
Mike Fiore 1:9f30fbe9e9c1 47 // set up the mDot with our network information
Mike Fiore 1:9f30fbe9e9c1 48 printf("setting frequency sub band\r\n");
Mike Fiore 1:9f30fbe9e9c1 49 if ((ret = dot->setFrequencySubBand(config_frequency_sub_band)) != mDot::MDOT_OK) {
Mike Fiore 1:9f30fbe9e9c1 50 log_error(dot, "failed to set frequency sub band", ret);
Mike Fiore 1:9f30fbe9e9c1 51 }
Mike Fiore 1:9f30fbe9e9c1 52 printf("setting network name\r\n");
Mike Fiore 1:9f30fbe9e9c1 53 if ((ret = dot->setNetworkName(config_network_name)) != mDot::MDOT_OK) {
Mike Fiore 1:9f30fbe9e9c1 54 log_error(dot, "failed to set network name", ret);
Mike Fiore 1:9f30fbe9e9c1 55 }
Mike Fiore 1:9f30fbe9e9c1 56 printf("setting network password\r\n");
Mike Fiore 1:9f30fbe9e9c1 57 if ((ret = dot->setNetworkPassphrase(config_network_pass)) != mDot::MDOT_OK) {
Mike Fiore 1:9f30fbe9e9c1 58 log_error(dot, "failed to set network password", ret);
Mike Fiore 1:9f30fbe9e9c1 59 }
Mike Fiore 1:9f30fbe9e9c1 60
Mike Fiore 1:9f30fbe9e9c1 61 // attempt to join the network
Mike Fiore 1:9f30fbe9e9c1 62 printf("joining network\r\n");
Mike Fiore 1:9f30fbe9e9c1 63 if ((ret = dot->joinNetwork()) != mDot::MDOT_OK) {
Mike Fiore 1:9f30fbe9e9c1 64 log_error(dot, "failed to join network", ret);
Mike Fiore 1:9f30fbe9e9c1 65 }
Mike Fiore 1:9f30fbe9e9c1 66
Mike Fiore 1:9f30fbe9e9c1 67 // format data for sending to the gateway
Mike Fiore 1:9f30fbe9e9c1 68 for (std::string::iterator it = data_str.begin(); it != data_str.end(); it++)
Mike Fiore 1:9f30fbe9e9c1 69 data.push_back((uint8_t) *it);
Mike Fiore 1:9f30fbe9e9c1 70
Mike Fiore 1:9f30fbe9e9c1 71 while (true) {
Mike Fiore 1:9f30fbe9e9c1 72 // send the data
Mike Fiore 1:9f30fbe9e9c1 73 // ACKs are enabled by default, so we're expecting to get one back
Mike Fiore 1:9f30fbe9e9c1 74 if ((ret = dot->send(data)) != mDot::MDOT_OK) {
Mike Fiore 1:9f30fbe9e9c1 75 log_error(dot, "failed to send", ret);
Mike Fiore 1:9f30fbe9e9c1 76 } else {
Mike Fiore 1:9f30fbe9e9c1 77 printf("successfully sent data to gateway\r\n");
Mike Fiore 1:9f30fbe9e9c1 78 }
Mike Fiore 1:9f30fbe9e9c1 79
Mike Fiore 1:9f30fbe9e9c1 80 wait(5);
Mike Fiore 1:9f30fbe9e9c1 81 }
Mike Fiore 1:9f30fbe9e9c1 82
Mike Fiore 1:9f30fbe9e9c1 83 return 0;
Mike Fiore 1:9f30fbe9e9c1 84 }
Mike Fiore 1:9f30fbe9e9c1 85
Mike Fiore 1:9f30fbe9e9c1 86 void log_error(mDot* dot, const char* msg, int32_t retval) {
Mike Fiore 1:9f30fbe9e9c1 87 printf("%s - %ld:%s, %s\r\n", msg, retval, mDot::getReturnCodeString(retval).c_str(), dot->getLastError().c_str());
Mike Fiore 1:9f30fbe9e9c1 88 }