MultiTech / libmDot-dev-mbed5-deprecated

Bleeding edge development version of the mDot library for mbed 5. This version of the library is not guaranteed to be stable or well tested and should not be used in production or deployment scenarios.

Dependents:   mDot-IKS01A1 mDot-IKS01A1 mDot-Examples mDot-IKS01A1-Explora ... more

Fork of libmDot-dev-mbed2-deprecated by MultiTech

The Dot library provides a LoRaWan certified stack for LoRa communication using MultiTech mDot and xDot devices. The stack is compatible with mbed 5.

#include "mDot.h"
#include "channel_plans.h"

int main() {
    ChannelPlan* plan = new lora::ChannelPlan_US915();
    assert(plan);
    mDot* dot = mDot::getInstance(plan);
    assert(dot);

    // ...
}

        /**
         * Add a multicast session address and keys
         * Downlink counter is set to 0
         * Up to 3 MULTICAST_SESSIONS can be set
         */
        int32_t setMulticastSession(uint8_t index, uint32_t addr, const uint8_t* nsk, const uint8_t* dsk);
 
        /**
         * Set a multicast session counter
         * Up to 3 MULTICAST_SESSIONS can be set
         */
        int32_t setMulticastDownlinkCounter(uint8_t index, uint32_t count);

        virtual void PacketRx(uint8_t port, uint8_t *payload, uint16_t size, int16_t rssi, int8_t snr, lora::DownlinkControl ctrl, uint8_t slot, uint8_t retries, uint32_t address);

The name of the repository can be used to determine which device the stack was compiled for and if it's a development or production-ready build:

• libmDot-mbed5 -> production-ready build for mDot
• libmDot-dev-mbed5 -> development build for mDot
• libxDot-mbed5 -> production-ready build for xDot
• libxDot-dev-mbed5 -> development build for xDot

A changelog for the Dot library can be found here.

The Dot library version and the version of mbed-os it was compiled against can both be found in the commit message for that revision of the Dot library. Building your application with the same version of mbed-os as what was used to build the Dot library is highly recommended!

The Dot-Examples repository demonstrates how to use the Dot library in a custom application.

The mDot and xDot platform pages have lots of platform specific information and document potential issues, gotchas, etc, and provide instructions for getting started with development. Please take a look at the platform page before starting development as they should answer many questions you will have.

update from rev 0310fa23bc9c37c0575342961eac26e61d0966f4. NOTE: this version breaks compatibility with older MTS network server versions - use setJoinByteOrder(mDot::MSB) if operating with a network server version earlier than 0.0.5 or AEP 1.0.30