Example program demonstrating sending and reading SMS messages from the cellular modem using the MTSAS library.
main.cpp
- Committer:
- Vanger
- Date:
- 2014-07-24
- Revision:
- 0:d9fd19c8ca39
- Child:
- 1:1f5c9497a125
File content as of revision 0:d9fd19c8ca39:
#include "mbed.h" #include "mtsas.h" int main(){ //Modify to match your apn if you are using an HSPA radio with a SIM card const char APN[] = ""; //Input the phone number below that you want to send the SMS messages to. //Send the AT command AT+CNUM to the radio to obtain the phone number of the radio. const char PHONE_NUMBER[] = ""; /** STMicro Nucelo F401RE * The supported jumper configurations of the MTSAS do not line up with * the pin mapping of the Nucleo F401RE. Therefore, the MTSAS serial TX * pin (JP8 Pin 2) must be manually jumped to Serial1 RX (Shield pin D2) * and the MTSAS serial RX pin (JP9 Pin 2) pin must be manually jumped to * Serial1 TX (Shield pin D8). * Uncomment the following line to use the STMicro Nuceleo F401RE */ MTSSerialFlowControl* io = new MTSSerialFlowControl(D8, D2, D3, D6); /** Freescale KL46Z * To configure the pins for the Freescale KL46Z board, use configuration B * for the SocketModem. The TX pin should be jumped to pin D2 (JP8), and the * RX pin should be jumped to pin D9 (JP9). * Uncomment te following line to use the Freescale KL46Z board */ //MTSSerialFlowControl* io = new MTSSerialFlowControl(D2, D9, D3, D6); /** Freescale KL64F * To configure the pins for the Freescale KL46Z board, use configuration A * for the SocketModem. The TX pin should be jumped to pin D1 (JP8), and the * RX pin should be jumped to pin D0 (JP9). * Uncomment te following line to use the Freescale KL46F board */ //MTSSerialFlowControl* io = new MTSSerialFlowControl(D1, D0, D3, D6); //Sets the baudrate for communicating with the radio io->baud(115200); Cellular* radio = CellularFactory::create(io); radio->setApn(APN); wait(15); //Delete all SMS messages radio->sendBasicCommand("AT+CMGD=1,4", 1000); //Setup commands and settings radio->sendBasicCommand("AT+CMGF=1", 1000); /** If the radio is and H5 type (MTSMC_H5, MTSMC_H5_IP) then * uncomment the first line. Otherwise, uncomment the second line. */ radio->sendBasicCommand("AT+CSMP=17,167,0,0", 1000); //radio->sendBasicCommand("AT+CSMP=,4098,0,2", 1000); //Format message and send to radio char command[100] = {0}; sprintf(command, "AT+CMGS=\"%s\"", PHONE_NUMBER); radio->sendCommand(command, 1000); radio->sendCommand("Hello from MultiTechSystems!", 5000, CTRL_Z); wait(5); //Read all messages received std::string received = radio->sendCommand("AT+CMGL=\"ALL\"", 2000); printf("Messages received:\n%s", received.c_str()); //Delete all messages radio->sendBasicCommand("AT+CMGD=1,4", 1000); printf("End of example code\n"); return 0; }