A library for talking to Multi-Tech's Cellular SocketModem Devices.
Dependents: M2X_dev axeda_wrapper_dev MTS_M2x_Example1 MTS_Cellular_Connect_Example ... more
io/MTSSerialFlowControl.h
- Committer:
- jengbrecht
- Date:
- 2013-12-27
- Revision:
- 83:9813f9b8ee68
- Parent:
- 78:ef3ee53cf5df
- Child:
- 86:186bbf974c7c
File content as of revision 83:9813f9b8ee68:
#ifndef MTSSERIALFLOWCONTROL_H #define MTSSERIALFLOWCONTROL_H #include "mbed.h" #include "MTSSerial.h" namespace mts { /** This class derives from MTSBufferedIO/MTSSerial and provides a buffered wrapper to the * standard mbed Serial class along with generic RTS/CTS HW flow control. Since it * depends only on the mbed Serial, DigitalOut and InterruptIn classes for accessing * the serial data, this class is inherently portable accross different mbed platforms * and provides HW flow control even when not natively supported by the processors * serial port. If HW flow control is not needed, use MTSSerial instead. It should also * be noted that the RTS/CTS functionality in this class is implemented as a DTE device. */ class MTSSerialFlowControl : public MTSSerial { public: /** Creates a new MTSSerialFlowControl object that can be used to talk to an mbed serial * port through internal SW buffers. Note that this class also adds the ability to use * RTS/CTS HW Flow Conrtol through and standard mbed DigitalIn and DigitalOut pins. * The RTS and CTS functionality assumes this is a DTE device. * * @param TXD the transmit data pin on the desired mbed serial interface. * @param RXD the receive data pin on the desired mbed serial interface. * @param RTS the DigitalOut pin that RTS will be attached to. (DTE) * @param CTS the DigitalIn pin that CTS will be attached to. (DTE) * @param txBufferSize the size in bytes of the internal SW transmit buffer. The * default is 64 bytes. * @param rxBufferSize the size in bytes of the internal SW receive buffer. The * default is 64 bytes. * @param name an optional name for the serial port. The default is blank. */ MTSSerialFlowControl(PinName TXD, PinName RXD, PinName RTS, PinName CTS, int txBufSize = 64, int rxBufSize = 64, char* name = ""); /** Destructs an MTSSerialFlowControl object and frees all related resources, * including internal buffers. */ ~MTSSerialFlowControl(); private: void notifyStartSending(); // Used to set cts start signal void notifyStopSending(); // Used to set cts stop signal //This device acts as a DTE DigitalOut* rts; // Used to tell DCE to send or not send data DigitalIn* cts; // Used to check if DCE is ready for data int highThreshold; // High water mark for setting cts to stop int lowThreshold; // Low water mark for setting cts to start virtual void handleRead(); // Method for handling data to be read virtual void handleWrite(); // Method for handling data to be written }; } #endif /* MTSSERIALFLOWCONTROL */