Revision 1:45df6a3a9a2c, committed 2019-01-16

Comitter:

lennartreij

Date:

Wed Jan 16 15:57:31 2019 +0000

Parent:

0:ce39f1aa5d6e

Commit message:

stable version 1

Changed in this revision

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/ADS1015.lib	Wed Jan 16 15:57:31 2019 +0000
@@ -0,0 +1,1 @@
+https://os.mbed.com/users/arve0/code/ADS1015/#aa277517f0ad

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/USBDevice.lib	Wed Jan 16 15:57:31 2019 +0000
@@ -0,0 +1,1 @@
+https://os.mbed.com/users/mbed_official/code/USBDevice/#53949e6131f6

--- a/main.cpp	Wed Jan 16 10:31:23 2019 +0000
+++ b/main.cpp	Wed Jan 16 15:57:31 2019 +0000
@@ -2,7 +2,7 @@
 #include "mbed.h"
 #include "Adafruit_ADS1015.h"
 #include "USBSerial.h" 
-#include "windows.h"
+#include "stdio.h"
 
 //Not sure if we need those?
 #define SERIAL_BAUD_RATE    115200
@@ -21,65 +21,107 @@
 int baud_rate = 115200;
 
 //Declair var
-int ledPin = 1;
-int averageFSR[8];
-int averagePE[6];
-int i = 0;
-Timer t;
+int ledPin = 0;
+int listFSR[10] [10]; //column 0 t/m 7 - FSR data, column 8 - lap number, column 9 - posture lable
+int listPE[10] [8]; //column 0 t/m 5 - PE data, column 6 - lap number, column 7 - posture lable
 
 void setupLED(){
-    pinMode(ledPin, OUTPUT);
+    DigitalOut ledPin(LED1);
 }
 
-void piepLong(){
-    digitalWrite(ledPin, HIGH);
-    delay(1000);
-    digitalWrite(ledPin, LOW);
+void introTekst(){
+    int c;
+    pc.printf("\nTo start test press ENTER... \n \n");
+    pc.printf("When you have pressed enter, a 5 second countdown will begin. After this countdown, the test will begin. \n \n");
+    pc.printf("You have to follow the pattern listed below 10 times: \n");
+    pc.printf("1. Right side \n");
+    pc.printf("2. Back \n");
+    pc.printf("3. Left side \n");
+    pc.printf("4. Out of bed \n \n");
+    pc.printf("A long PIEEP indicates you to switch to the next position on the list, you have 5 seconds to switch. \n");
+    pc.printf("Two short PIEP's indicates you that the measurement has begun. Do not move during this period of 15 seconds. \n");
+    pc.printf("Three long PIEEEEP's will indicate you that the test has finished. \n \n");
+    pc.printf("Good luck!\n");
+    fflush(stdout);
+    do c = getchar(); while((c != '\n') && (c != EOF)); //Press enter to continue
+    pc.printf("\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n"); 
 }
-
-void piepShort(int x){
-     for(int i=1; i<=x; i++){ 
-        digitalWrite(ledPin, HIGH);
-        delay(500);
-        digitalWrite(ledPin, LOW);
-        delay(500);
-     }
-}   
-
-void delaySeconds(int x){
-    int timeMiliSeconds = x * 1000;
-    delay(timeMiliSeconds)
+  
+void piepLong(){ //create long piep sound one time
+    ledPin = 1;
+    pc.printf("PIEEEEEEEP");
+    wait_ms(1000);
+    ledPin = 0;
+    pc.printf("\n");
 }
 
+void piepShort(int x){ //create short piep sound for x times
+    for(int i=1; i<=x; i++){ 
+        ledPin = 1;
+        pc.printf("PIEP ");
+        wait_ms(200);
+        ledPin = 0;
+    }
+    pc.printf("\n");
+}   
+
+void countDown(){ //countdown from 5. makes short piep sound every second
+    for(int i=5; i>=1; i--){
+        ledPin = 1;
+        pc.printf("%d", i);
+        pc.printf("\n");
+        wait_ms(500);
+        ledPin = 0;
+        wait_ms(500);
+    }
+}    
+    
 int main() {
-    pc.usb.baud(baud_rate);
-    pc.printf(
-        “To start test press a key \n
-        \n
-        When you have pressed enter, a 5 second countdown will begin. After this countdown, the test will begin. \n
-        \n
-        You have to follow the pattern listed below 10 times: \r
-        1. Right side \n
-        2. Back \n
-        3. Left side \n
-        4. Out of bed \n
-        \n
-        A long PIEEP indicates you to switch to the next position on the list, you have 5 seconds to switch. \n
-        Two short PIEP’s indicates you to that the measurement has begun. Do not move during this period of 15 seconds. \n
-        Three long PIEEEEP’s will indicate you that the test has finished. \n
-        \n
-        Good luck!”);
+    pc.baud(baud_rate);
+    introTekst(); //explaination screen about the test  
+    countDown(); //5 seconds countdown
         
-    if getc{
-        piepShort(5); //5 seconds countdown
+    for(int i=1; i<=10; i++){ //10 times loop
+        pc.printf("Lap "); //print lap number
+        pc.printf("%d", i); //print lap number
+        pc.printf("\n"); //print lap number
+    
+        piepLong(); //right side signal
+        wait_ms(5000); //time for turning
+        piepShort(2); //create short piep sound two times
+        pc.printf("collect data right side\n"); //extra information for testing
+        //code collect data
+        wait_ms(5000); //time for collecting data  
+        // end of placeholder collect data code
+         
+        piepLong(); //back side signal
+        wait_ms(5000); //time for turning
+        piepShort(2); //creat short piep sound two times
+        pc.printf("collect data back side\n"); //extra information for testing
+        //code collect data
+        wait_ms(5000); //time for collecting data   
+        // end of placeholder collect data code
         
-        for(int i=1; i<=10; i++){ //10 times loop
-            piepLong(); //right side signal
-            delaySeconds(5); //time for turning
-            piepShort
-            //collect data
-            
-        }            
-    }
+        piepLong(); //left side signal
+        wait_ms(5000); //time for turning
+        piepShort(2); //creat short piep sound two times
+        pc.printf("collect data left side\n"); //extra information for testing
+        //code collect data
+        wait_ms(5000); //time for collecting data   
+        // end of placeholder collect data code
+        
+        piepLong(); //out of bed signal
+        wait_ms(5000); //time for turning
+        piepShort(2); //creat short piep sound two times
+        pc.printf("collect data out of bed\n"); //extra information for testing
+        //code collect data
+        wait_ms(5000); //time for collecting data  
+        // end of placeholder collect data code
+    }   
+    
+    piepLong(); //final piep sounds, signal that test has finished
+    piepLong(); //final piep sounds
+    piepLong(); //final piep sounds
+           
     return 0;
 }