Micromint Bambino 210E

Overview¶

The Micromint Bambino 210E is a multi-core SBC designed for compatibility with the mbed framework. It is powered by an NXP LPC4330, the first dual-core ARM Cortex-M microcontroller. Its Cortex-M4 and Cortex-M0 cores are both capable of 204 MHz. With 264 KB SRAM onboard and 4 MB of flash, developers can fulfill demanding requirements in monitoring, instrumentation, data acquisition, process control and many other applications. Two USB device ports serve both as power sources and for data communications or debugging. I/O starts with two buttons and four LEDs and can be extended using Arduino compatible shields. Extended I/O headers are available for interfacing additional I/O modules. 100 megabit Ethernet is onboard, as well as microSD and Xbee sockets. Hardware and software licensing is open source, giving developers the freedom to adapt the Micromint Bambino to their specific requirements.

Besides the built-in ports, boards can be ordered with optional mbed HDK and a JTAG interfaces. A coin cell battery for the RTC, screw terminals for power and two PMOD interfaces can be easily implemented in the field by soldering components.

The Bambino 210E is available for under $40 in single quantities. Volume pricing and custom configurations are available by contacting our Sales staff at sales@micromint.com.

Pinout¶

Features¶

• NXP LPC4330 @ 204 MHz
• Dual core ARM® Cortex™-M4/M0
• 264 KB SRAM, 8 MB Flash
• High-speed USB 2.0 device port
• Full-speed USB 2.0 device port
• 10/100 Mbps Ethernet
• microSD socket
• Xbee socket
• 2 buttons, 4 LEDs
• Arduino-compatible headers with up to
  • 22 Digital I/O (GPIO)
  • 6 Analog inputs (ADCs)
  • 1 Analog output (DAC)
  • 1 Serial Peripheral Interface (SPI)
  • 2 Async serial ports (UARTs)
  • 1 I²C port
• Extended I/O headers with up to
  • 29 Digital I/O (GPIO)
  • 2 Analog inputs (ADCs)
  • 1 Serial Peripheral Interface (SPI)
  • 2 Async serial ports (UARTs)
    NOTE: Functions are multiplexed on I/O pins as shown in pinout. Additional serial I/O can be enabled using SGPIO.
• Form factor 4” x 2.3” (101.6 x 58.4 mm)

Options¶

• mbed HDK
• JTAG interface
• RTC coin cell battery
• PMOD I²C interface
• PMOD SPI interface

See also¶

• Bambino 210 product page - General product info, online ordering
• Bambino wiki - Documentation, schematics, firmware updates
• NXP LPC43xx User Manual