Revision 0:54f0e2724f0e, committed 2018-05-14

Comitter:

leandropg

Date:

Mon May 14 15:14:15 2018 +0000

Commit message:

MBC001 - DigitalOut; This example use the DigitalOut function

Changed in this revision

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/.gitignore	Mon May 14 15:14:15 2018 +0000
@@ -0,0 +1,4 @@
+.build
+.mbed
+projectfiles
+*.py*

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/README.md	Mon May 14 15:14:15 2018 +0000
@@ -0,0 +1,87 @@
+# Getting started with Blinky on mbed OS
+
+This guide reviews the steps required to get Blinky working on an mbed OS platform.
+
+Please install [mbed CLI](https://github.com/ARMmbed/mbed-cli#installing-mbed-cli).
+
+## Import the example application
+
+From the command-line, import the example:
+
+```
+mbed import mbed-os-example-blinky
+cd mbed-os-example-blinky
+```
+
+### Now compile
+
+Invoke `mbed compile`, and specify the name of your platform and your favorite toolchain (`GCC_ARM`, `ARM`, `IAR`). For example, for the ARM Compiler 5:
+
+```
+mbed compile -m K64F -t ARM
+```
+
+Your PC may take a few minutes to compile your code. At the end, you see the following result:
+
+```
+[snip]
++----------------------------+-------+-------+------+
+| Module                     | .text | .data | .bss |
++----------------------------+-------+-------+------+
+| Misc                       | 13939 |    24 | 1372 |
+| core/hal                   | 16993 |    96 |  296 |
+| core/rtos                  |  7384 |    92 | 4204 |
+| features/FEATURE_IPV4      |    80 |     0 |  176 |
+| frameworks/greentea-client |  1830 |    60 |   44 |
+| frameworks/utest           |  2392 |   512 |  292 |
+| Subtotals                  | 42618 |   784 | 6384 |
++----------------------------+-------+-------+------+
+Allocated Heap: unknown
+Allocated Stack: unknown
+Total Static RAM memory (data + bss): 7168 bytes
+Total RAM memory (data + bss + heap + stack): 7168 bytes
+Total Flash memory (text + data + misc): 43402 bytes
+Image: .\.build\K64F\ARM\mbed-os-example-blinky.bin
+```
+
+### Program your board
+
+1. Connect your mbed device to the computer over USB.
+1. Copy the binary file to the mbed device.
+1. Press the reset button to start the program.
+
+The LED on your platform turns on and off.
+
+## Export the project to Keil MDK, and debug your application
+
+From the command-line, run the following command:
+
+```
+mbed export -m K64F -i uvision
+```
+
+To debug the application:
+
+1. Start uVision.
+1. Import the uVision project generated earlier.
+1. Compile your application, and generate an `.axf` file.
+1. Make sure uVision is configured to debug over CMSIS-DAP (From the Project menu > Options for Target '...' > Debug tab > Use CMSIS-DAP Debugger).
+1. Set breakpoints, and start a debug session.
+
+![Image of uVision](img/uvision.png)
+
+## Troubleshooting
+
+1. Make sure `mbed-cli` is working correctly and its version is `>1.0.0`
+
+ ```
+ mbed --version
+ ```
+
+ If not, you can update it:
+
+ ```
+ pip install mbed-cli --upgrade
+ ```
+
+2. If using Keil MDK, make sure you have a license installed. [MDK-Lite](http://www.keil.com/arm/mdk.asp) has a 32 KB restriction on code size.
\ No newline at end of file

Binary file img/uvision.png has changed

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp	Mon May 14 15:14:15 2018 +0000
@@ -0,0 +1,45 @@
+/**
+ * MBC001 - DigitalOut
+ * This example use the DigitalOut function
+ * 14 May 2018 - Mbed Colombia - http://mbedcolombia.wordpress.com/
+ *
+ * Board: ST-Nucleo-F446RE - https://os.mbed.com/platforms/ST-Nucleo-F446RE/
+ *
+ * Copyright [2018] [Leandro Perez Guatibonza / leandropg AT gmail DOT com]
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ * 
+ *    http://www.apache.org/licenses/LICENSE-2.0
+ * 
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#include "mbed.h"
+
+// LED connected Pin PC_0
+DigitalOut led(PC_0);
+
+// Main Loop runs in its own thread in the OS
+int main() {
+   
+    // Inifite Loop
+    while(1) {
+        
+        // LED Turn-On
+        led = 1;
+        
+        // Wait 200 ms
+        wait(0.2);
+        
+        // LED Turn-Off
+        led = 0;
+        
+        // Wait 200 ms
+        wait(0.2);
+    }
+}
\ No newline at end of file

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed-os.lib	Mon May 14 15:14:15 2018 +0000
@@ -0,0 +1,1 @@
+https://github.com/ARMmbed/mbed-os/#c9e63f14085f5751ff5ead79a7c0382d50a813a2