Diff: max32630fthr.h

Revision:

3:09e3dbb49561

Parent:

2:7a1d7d6d520e

Child:

5:8e424775234a

--- a/max32630fthr.h	Sun Nov 20 23:41:01 2016 +0000
+++ b/max32630fthr.h	Tue Dec 13 21:28:57 2016 +0000
@@ -41,25 +41,25 @@
  * @brief MAX32630FTHR Board Support Library
  *
  * @details The MAX32630FTHR is a rapid development application board for
- * ultra low power wearable applications.  It includes common peripherals and 
- * expansion connectors all power optimized for getting the longest life from 
+ * ultra low power wearable applications.  It includes common peripherals and
+ * expansion connectors all power optimized for getting the longest life from
  * the battery.  This library configures the power and I/O for the board.
  * <br>https://www.maximintegrated.com/max32630fthr
  *
  * @code
  * #include "mbed.h"
  * #include "max32630fthr.h"
- * 
+ *
  * DigitalOut led1(LED1);
  * MAX32630FTHR pegasus(MAX32630FTHR::VIO_3V3);
- * 
+ *
  * // main() runs in its own thread in the OS
  * // (note the calls to Thread::wait below for delays)
  * int main()
  * {
  *     // initialize power and I/O on MAX32630FTHR board
  *     pegasus.init();
- *     
+ *
  *     while (true) {
  *         led1 = !led1;
  *         Thread::wait(500);
@@ -84,9 +84,8 @@
     /**
         * MAX32630FTHR constructor.
         *
-        * @param vio I/O voltage for header pins
         */
-    MAX32630FTHR(vio_t vio);
+    MAX32630FTHR();
 
     /**
         * MAX32630FTHR destructor.
@@ -100,30 +99,28 @@
      *  Disables resisitive pulldown on MON(AIN_0)
      *  Sets default I/O voltages to 3V3 for micro SD card.
      *  Sets I/O voltage for header pins to hdrVio specified.
+     * @param hdrVio I/O voltage for header pins
      * @returns 0 if no errors, -1 if error.
     */
-    int init();
+    int init(vio_t hdrVio);
 
     /**
      * @brief   Sets I/O Voltage
      * @details Sets the voltage rail to be used for a given pin.
-     *  VIO_1V8 selects VDDIO which is supplied by Buck2, which is set at 1.8V,   
+     *  VIO_1V8 selects VDDIO which is supplied by Buck2, which is set at 1.8V,
      *  VIO_3V3 selects VDDIOH which is supplied by LDO2, which is typically 3.3V/
      * @param   pin Pin whose voltage supply is being assigned.
      * @param   vio Voltage rail to be used for specified pin.
      * @returns 0 if no errors, -1 if error.
     */
     int vddioh(PinName pin, vio_t vio);
-    
+
     /// Local I2C bus for configuring PMIC and accessing BMI160 IMU.
     I2C i2c;
 
     /// MAX14690 PMIC Instance
     MAX14690 max14690;
 
-    /// The default I/O voltage to be used for header pins.
-    vio_t hdrVio;    
-
 };
 
 #endif /* _MAX32630FTHR_H_ */