MAX20303 Wearable PMIC

Revision 1:0333f77c665f, committed 2018-04-25

Comitter:

Emre.Eken

Date:

Wed Apr 25 09:52:48 2018 +0300

Parent:

0:ff4818eff240

Commit message:

The contents of the .cpp and .h files were changed

Changed in this revision

--- a/MAX20303.cpp	Fri Jan 19 15:47:44 2018 -0800
+++ b/MAX20303.cpp	Wed Apr 25 09:52:48 2018 +0300
@@ -1,160 +1,287 @@
-/*******************************************************************************
- * Copyright (C) 2018 Maxim Integrated Products, Inc., All Rights Reserved.
- *
- * Permission is hereby granted, free of charge, to any person obtaining a
- * copy of this software and associated documentation files (the "Software"),
- * to deal in the Software without restriction, including without limitation
- * the rights to use, copy, modify, merge, publish, distribute, sublicense,
- * and/or sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included
- * in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
- * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
- * IN NO EVENT SHALL MAXIM INTEGRATED BE LIABLE FOR ANY CLAIM, DAMAGES
- * OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
- * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- *
- * Except as contained in this notice, the name of Maxim Integrated
- * Products, Inc. shall not be used except as stated in the Maxim Integrated
- * Products, Inc. Branding Policy.
- *
- * The mere transfer of this software does not imply any licenses
- * of trade secrets, proprietary technology, copyrights, patents,
- * trademarks, maskwork rights, or any other form of intellectual
- * property whatsoever. Maxim Integrated Products, Inc. retains all
- * ownership rights.
- *******************************************************************************
- */
-
-
-#include "MAX20303.h"
-#include "Peripherals.h"
-
-
-//******************************************************************************
-MAX20303::MAX20303(I2C *i2c):
-	m_i2c(i2c), m_writeAddress(MAX20303_SLAVE_WR_ADDR),
-	m_readAddress(MAX20303_SLAVE_RD_ADDR)
-{
-}
-
-
-//******************************************************************************
-MAX20303::~MAX20303(void)
-{
-  //empty block
-}
-
-
-//******************************************************************************
-int MAX20303::LDO1Config()
-{
-	int32_t ret = 0;
-	uint8_t val;
-	ret |= writeReg(MAX20303::REG_AP_CMDOUT, 0x40);
-	ret |= writeReg(MAX20303::REG_AP_DATOUT0, 0x05);
-	ret |= writeReg(MAX20303::REG_AP_DATOUT1, 0x34);
-
-	readReg(MAX20303::REG_AP_CMDOUT, val);
-	readReg(MAX20303::REG_AP_DATOUT0, val);
-	readReg(MAX20303::REG_AP_DATOUT1, val);
-
-	return ret;
-}
-
-//******************************************************************************
-int MAX20303::writeReg(registers_t reg, uint8_t value)
-{
-	int32_t ret;
-
-	char cmdData[2] = {reg, value};
-
-	ret = m_i2c->write(m_writeAddress, cmdData, sizeof(cmdData));
-	//printf("MAX20303 write reg[0x%X]=0x%X, ret=%d\r\n", (uint32_t)reg, value, ret)
-
-	if (ret != 0)
-		return MAX20303_ERROR;
-
-	return MAX20303_NO_ERROR;
-}
-
-
-//******************************************************************************
-int MAX20303::readReg(registers_t reg, uint8_t &value)
-{
-	int32_t ret;
-
-	char data = reg;
-
-	ret = m_i2c->write(m_writeAddress, &data, sizeof(data));
-	if (ret != 0) {
-		printf("%s - failed - ret: %d\n", __func__);
-		return MAX20303_ERROR;
-	}
-
-	ret = m_i2c->read(m_readAddress, &data, sizeof(data));
-	if (ret != 0) {
-		printf("%s - failed - ret: %d\n", __func__);
-		return MAX20303_ERROR;
-	}
-
-	value = data;
-	printf("MAX20303 read reg[0x%X]=0x%X, ret=%d\r\n", (uint32_t)reg, value, ret);
-	return MAX20303_NO_ERROR;
-}
-
-
-//******************************************************************************
-int MAX20303::mv2bits(int mV)
-{
-    int regBits;
-
-    if (( MAX20303_LDO_MIN_MV <= mV) && (mV <= MAX20303_LDO_MAX_MV)) {
-        regBits = (mV -  MAX20303_LDO_MIN_MV) /  MAX20303_LDO_STEP_MV;
-    } else {
-        return -1;
-    }
-
-    return regBits;
-}
-
-int MAX20303::led0on(void) {
-
-	writeReg(REG_LED0_DIRECT, 0x21);
-
-	return MAX20303_NO_ERROR;
-}
-
-int MAX20303::BoostEnable(void) {
-
-	writeReg(REG_AP_CMDOUT, 0x30);
-	writeReg(REG_AP_DATOUT3, 0x00);	// 00 : 5V
-	writeReg(REG_AP_DATOUT0, 0x01);	// Boost Enabled
-
-	return MAX20303_NO_ERROR;
-}
-
-int MAX20303::BuckBoostEnable(void)
-{
-	int ret = 0;
-
-	ret |= writeReg( REG_AP_DATOUT0,  0x00);    // Reserved = 0x00
-	ret |= writeReg( REG_AP_DATOUT1,  0x04);    // BBstlSet = 0b'100   Buck Boost Peak current Limit = 200mA
-	ret |= writeReg( REG_AP_DATOUT2,  0x19);    // BBstVSet = 0b'11001  Buck Boost Output Voltage = 5V
-	ret |= writeReg( REG_AP_DATOUT3,  0x01);    // BBstRipRed = 1 Ripple Reduction
-	// BBstAct    = 1 Actively discharged in Hard-Reset or Enable Low
-	// BBstPas    = 1 Passively discharged in Hard-Reset or Enable Low
-	// BBstMd     = 1 Damping Enabled
-	// BBstInd    = 0  Inductance is 4.7uH
-	// BBstEn     = 0b'01 Enabled
-	ret |= writeReg( REG_AP_CMDOUT, 0x70);
-	if (ret != 0)
-		return MAX20303_ERROR;
-
-	return MAX20303_NO_ERROR;
-}
+/*******************************************************************************
+ * Copyright (C) 2018 Maxim Integrated Products, Inc., All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included
+ * in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+ * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+ * IN NO EVENT SHALL MAXIM INTEGRATED BE LIABLE FOR ANY CLAIM, DAMAGES
+ * OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Except as contained in this notice, the name of Maxim Integrated
+ * Products, Inc. shall not be used except as stated in the Maxim Integrated
+ * Products, Inc. Branding Policy.
+ *
+ * The mere transfer of this software does not imply any licenses
+ * of trade secrets, proprietary technology, copyrights, patents,
+ * trademarks, maskwork rights, or any other form of intellectual
+ * property whatsoever. Maxim Integrated Products, Inc. retains all
+ * ownership rights.
+ *******************************************************************************
+ */
+
+
+#include "MAX20303.h"
+
+
+//******************************************************************************
+MAX20303::MAX20303(I2C *i2c):
+	m_i2c(i2c), m_writeAddress(MAX20303_SLAVE_WR_ADDR),
+	m_readAddress(MAX20303_SLAVE_RD_ADDR)
+{
+}
+
+
+//******************************************************************************
+MAX20303::~MAX20303(void)
+{
+  //empty block
+}
+
+
+//******************************************************************************
+int MAX20303::LDO1Config()
+{
+	int32_t ret = 0;
+	uint8_t val;
+	appcmdoutvalue_ = 0x40;
+	appdatainoutbuffer_[0] = 0x05;
+	appdatainoutbuffer_[1] = 0x34;
+	AppWrite(2);
+
+	return ret;
+}
+
+//******************************************************************************
+int MAX20303::writeReg(registers_t reg, uint8_t value)
+{
+	int32_t ret;
+
+	char cmdData[2] = {reg, value};
+
+	ret = m_i2c->write(m_writeAddress, cmdData, sizeof(cmdData));
+
+	if (ret != 0)
+		return MAX20303_ERROR;
+
+	return MAX20303_NO_ERROR;
+}
+
+
+//******************************************************************************
+int MAX20303::readReg(registers_t reg, uint8_t &value)
+{
+	int32_t ret;
+
+	char data = reg;
+
+	ret = m_i2c->write(m_writeAddress, &data, sizeof(data));
+	if (ret != 0) {
+		printf("%s - failed - ret: %d\n", __func__);
+		return MAX20303_ERROR;
+	}
+
+	ret = m_i2c->read(m_readAddress, &data, sizeof(data));
+	if (ret != 0) {
+		printf("%s - failed - ret: %d\n", __func__);
+		return MAX20303_ERROR;
+	}
+
+	value = data;
+	printf("MAX20303 read reg[0x%X]=0x%X, ret=%d\r\n", (uint32_t)reg, value, ret);
+	return MAX20303_NO_ERROR;
+}
+
+//******************************************************************************
+int MAX20303::readRegMulti(registers_t reg, uint8_t *value, uint8_t len){
+	int32_t ret;
+	char data = reg;
+
+	ret = m_i2c->write(m_writeAddress, &data, sizeof(data));
+	if (ret != 0) {
+		printf("%s - failed - ret: %d\n", __func__);
+		return MAX20303_ERROR;
+	}
+
+	ret = m_i2c->read(m_readAddress, (char *)value, len);
+	if (ret != 0) {
+		printf("%s - failed - ret: %d\n", __func__);
+		return MAX20303_ERROR;
+	}
+
+	printf("MAX20303 read reg[0x%X]=0x%X, ret=%d\r\n", (uint32_t)reg, value, ret);
+	return MAX20303_NO_ERROR;
+}
+
+//******************************************************************************
+int MAX20303::writeRegMulti(registers_t reg, uint8_t *value, uint8_t len){
+	int32_t ret;
+	i2cbuffer_[0] = reg;
+	memcpy(&i2cbuffer_[1], value, len);
+
+	ret = m_i2c->write(m_writeAddress, (char *)i2cbuffer_, (len+1));
+
+	if (ret != 0)
+		return MAX20303_ERROR;
+
+	return MAX20303_NO_ERROR;
+}
+//******************************************************************************
+int MAX20303::mv2bits(int mV)
+{
+    int regBits;
+
+    if (( MAX20303_LDO_MIN_MV <= mV) && (mV <= MAX20303_LDO_MAX_MV)) {
+        regBits = (mV -  MAX20303_LDO_MIN_MV) /  MAX20303_LDO_STEP_MV;
+    } else {
+        return -1;
+    }
+
+    return regBits;
+}
+//******************************************************************************
+int MAX20303::PowerOffthePMIC(){
+	int ret;
+	appdatainoutbuffer_[0] = 0xB2;
+	appcmdoutvalue_ = 0x80;
+	ret = AppWrite(1);
+
+	if(appcmdoutvalue_ != 0x80){
+		ret |= MAX20303_ERROR;
+	}
+
+	return ret;
+}
+//******************************************************************************
+int MAX20303::SoftResetthePMIC(){
+	int ret;
+	appdatainoutbuffer_[0] = 0xB3;
+	appcmdoutvalue_ = 0x81;
+	ret = AppWrite(1);
+
+	if(appcmdoutvalue_ != 0x81){
+		ret |= MAX20303_ERROR;
+	}
+
+	return ret;
+}
+//******************************************************************************
+int MAX20303::HardResetthePMIC(){
+	int ret;
+	appdatainoutbuffer_[0] = 0xB4;
+	appcmdoutvalue_ = 0x82;
+	ret = AppWrite(1);
+
+	if(appcmdoutvalue_ != 0x82){
+		ret |= MAX20303_ERROR;
+	}
+
+	return ret;
+}
+
+//******************************************************************************
+int MAX20303::AppWrite(uint8_t dataoutlen){
+	int ret;
+
+	ret = writeRegMulti(MAX20303::REG_AP_DATOUT0, appdatainoutbuffer_, dataoutlen);
+	ret |= writeReg(MAX20303::REG_AP_CMDOUT, appcmdoutvalue_);
+	wait_ms(10);
+	ret |= readReg(MAX20303::REG_AP_RESPONSE, appcmdoutvalue_);
+
+	if(ret != 0)
+		return MAX20303_ERROR;
+
+	return MAX20303_NO_ERROR;
+}
+
+
+//******************************************************************************
+int MAX20303::AppRead(uint8_t datainlen){
+	int ret;
+
+	ret = writeReg(MAX20303::REG_AP_CMDOUT, appcmdoutvalue_);
+	wait_ms(10);
+	ret |= readRegMulti(MAX20303::REG_AP_RESPONSE, i2cbuffer_, datainlen);
+	if(ret != 0)
+		return MAX20303_ERROR;
+
+	return MAX20303_NO_ERROR;
+}
+
+//******************************************************************************
+char MAX20303::CheckPMICHWID(){
+	int ret;
+	uint8_t value = 0x00;
+
+	ret = readReg(MAX20303::REG_HARDWARE_ID, value);
+	if(ret != MAX20303_NO_ERROR)
+		return false;
+
+	if(value == 0x02)
+		return true;
+	else
+		return false;
+}
+
+//******************************************************************************
+int MAX20303::led0on(char enable) {
+
+	if(enable)
+		return writeReg(REG_LED0_DIRECT, 0x21);
+	else
+		return writeReg(REG_LED0_DIRECT, 0x01);
+}
+
+//******************************************************************************
+int MAX20303::led1on(char enable) {
+	if(enable)
+		return writeReg(REG_LED1_DIRECT, 0x21);
+	else
+		return writeReg(REG_LED1_DIRECT, 0x01);
+}
+
+//******************************************************************************
+int MAX20303::led2on(char enable) {
+	if(enable)
+		return writeReg(REG_LED2_DIRECT, 0x21);
+	else
+		return writeReg(REG_LED2_DIRECT, 0x01);
+}
+
+
+//******************************************************************************
+int MAX20303::BoostEnable(void) {
+
+	writeReg(REG_AP_CMDOUT, 0x30);
+	writeReg(REG_AP_DATOUT3, 0x00);	// 00 : 5V
+	writeReg(REG_AP_DATOUT0, 0x01);	// Boost Enabled
+
+	return MAX20303_NO_ERROR;
+}
+
+//******************************************************************************
+int MAX20303::BuckBoostEnable(void)
+{
+	int ret = 0;
+
+	ret |= writeReg( REG_AP_DATOUT0,  0x00);    // Reserved = 0x00
+	ret |= writeReg( REG_AP_DATOUT1,  0x04);    // BBstlSet = 0b'100   Buck Boost Peak current Limit = 200mA
+	ret |= writeReg( REG_AP_DATOUT2,  0x19);    // BBstVSet = 0b'11001  Buck Boost Output Voltage = 5V
+	ret |= writeReg( REG_AP_DATOUT3,  0x01);    // BBstRipRed = 1 Ripple Reduction
+	ret |= writeReg( REG_AP_CMDOUT, 0x70);
+	if (ret != 0)
+		return MAX20303_ERROR;
+
+	return MAX20303_NO_ERROR;
+}

--- a/MAX20303.h	Fri Jan 19 15:47:44 2018 -0800
+++ b/MAX20303.h	Wed Apr 25 09:52:48 2018 +0300
@@ -1,163 +1,182 @@
-/*******************************************************************************
- * Copyright (C) 2018 Maxim Integrated Products, Inc., All Rights Reserved.
- *
- * Permission is hereby granted, free of charge, to any person obtaining a
- * copy of this software and associated documentation files (the "Software"),
- * to deal in the Software without restriction, including without limitation
- * the rights to use, copy, modify, merge, publish, distribute, sublicense,
- * and/or sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included
- * in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
- * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
- * IN NO EVENT SHALL MAXIM INTEGRATED BE LIABLE FOR ANY CLAIM, DAMAGES
- * OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
- * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- *
- * Except as contained in this notice, the name of Maxim Integrated
- * Products, Inc. shall not be used except as stated in the Maxim Integrated
- * Products, Inc. Branding Policy.
- *
- * The mere transfer of this software does not imply any licenses
- * of trade secrets, proprietary technology, copyrights, patents,
- * trademarks, maskwork rights, or any other form of intellectual
- * property whatsoever. Maxim Integrated Products, Inc. retains all
- * ownership rights.
- *******************************************************************************
- */
-#ifndef __MAX20303_H_
-#define __MAX20303_H_
-
-#include "mbed.h"
-
-#define MAX20303_SLAVE_ADDR		(0x50 >> 1)
-#define MAX20303_SLAVE_WR_ADDR		((MAX20303_SLAVE_ADDR << 1))
-#define MAX20303_SLAVE_RD_ADDR		((MAX20303_SLAVE_ADDR << 1) | 1)
-
-
-#define MAX20303_NO_ERROR   0
-#define MAX20303_ERROR      -1
-
-#define MAX20303_I2C_ADDR_FUEL_GAUGE	0x6c
-
-#define MAX20303_LDO_MIN_MV 800
-#define MAX20303_LDO_MAX_MV 3600
-#define MAX20303_LDO_STEP_MV 100
-
-#define MAX20303_OFF_COMMAND 0xB2
-
-class MAX20303
-{
-
-public:
-	/**
-	* @brief  Constructor using reference to I2C object
-	* @param i2c - Reference to I2C object
-	* @param slaveAddress - 7-bit I2C address
-	*/
-	MAX20303(I2C *i2c);
-
-	/** @brief Destructor */
-	~MAX20303(void);
-
-	int led0on(void);
-	int BoostEnable(void);
-	int BuckBoostEnable(void);
-
-	/** @brief Enable the 1.8V output rail **/
-	int LDO1Config(void);
-	int mv2bits(int mV);
-
-private:
-	/**
-	 * @brief   Register Addresses
-	 * @details Enumerated MAX20303 register addresses
-	 */
-	enum registers_t {
-		REG_HARDWARE_ID		= 0x00,		///< HardwareID Register
-		REG_FIRMWARE_REV	= 0x01,		///< FirmwareID Register
-		//					= 0x02,		///<
-		REG_INT0			= 0x03,		///< Int0 Register
-		REG_INT1			= 0x04,		///< Int1 Register
-		REG_INT2			= 0x05,		///< Int2 Register
-		REG_STATUS0			= 0x06,		///< Status Register 0
-		REG_STATUS1			= 0x07,		///< Status Register 1
-		REG_STATUS2			= 0x08,		///< Status Register 2
-		REG_STATUS3			= 0x09,		///< Status Register 2
-		//					= 0x0A,		///<
-		REG_SYSTEM_ERROR	= 0x0B,		///< SystemError Register
-		REG_INT_MASK0		= 0x0C,		///< IntMask0 Register
-		REG_INT_MASK1		= 0x0D,		///< IntMask1 Register
-		REG_INT_MASK2		= 0x0E,		///< IntMask1 Register
-		REG_AP_DATOUT0		= 0x0F,     ///< APDataOut0 Register
-		REG_AP_DATOUT1		= 0x10,     ///< APDataOut1 Register
-		REG_AP_DATOUT2		= 0x11,     ///< APDataOut2 Register
-		REG_AP_DATOUT3		= 0x12,     ///< APDataOut3 Register
-		REG_AP_DATOUT4		= 0x13,     ///< APDataOut4 Register
-		REG_AP_DATOUT5		= 0x14,     ///< APDataOut5 Register
-		REG_AP_DATOUT6		= 0x15,     ///< APDataOut6 Register
-		REG_AP_CMDOUT		= 0x17,     ///< APCmdOut Register
-		REG_AP_RESPONSE		= 0x18,     ///< APResponse Register
-		REG_AP_DATAIN0		= 0x19,
-		REG_AP_DATAIN1		= 0x1A,
-		REG_AP_DATAIN2		= 0x1B,
-		REG_AP_DATAIN3		= 0x1C,
-		REG_AP_DATAIN4		= 0x1D,
-		REG_AP_DATAIN5		= 0x1E,
-		//					= 0x1F,		///<
-		REG_LDO_DIRECT		= 0x20,
-		REG_MPC_DIRECTWRITE	= 0x21,
-		REG_MPC_DIRECTRED	= 0x22,
-
-		REG_LED_STEP_DIRECT	= 0x2C,
-		REG_LED0_DIRECT		= 0x2D,
-		REG_LED1_DIRECT		= 0x2E,
-		REG_LED2_DIRECT		= 0x2F,
-
-
-		REG_LDO1_CONFIG_WRITE = 0x40,
-		REG_LDO1_CONFIG_READ  = 0x41,
-		REG_LDO2_CONFIG_WRITE = 0x42,
-		REG_LDO2_CONFIG_READ  = 0x43
-
-		/*
-		REG_CHG_TMR = 0x0C,   ///< Charger Timers
-		REG_BUCK1_CFG = 0x0D,   ///< Buck 1 Configuration
-		REG_BUCK1_VSET = 0x0E,   ///< Buck 1 Voltage Setting
-		REG_BUCK2_CFG = 0x0F,   ///< Buck 2 Configuration
-		REG_BUCK2_VSET = 0x10,   ///< Buck 2 Voltage Setting
-		REG_RSVD_11 = 0x11,   ///< Reserved 0x11
-		REG_LDO1_CFG = 0x12,   ///< LDO 1 Configuration
-		REG_LDO1_VSET = 0x13,   ///< LDO 1 Voltage Setting
-		REG_LDO2_CFG = 0x14,   ///< LDO 2 Configuration
-		REG_LDO2_VSET = 0x15,   ///< LDO 2 Voltage Setting
-		REG_LDO3_CFG = 0x16,   ///< LDO 3 Configuration
-		REG_LDO3_VSET = 0x17,   ///< LDO 3 Voltage Setting
-		REG_THRM_CFG = 0x18,   ///< Thermistor Configuration
-		REG_MON_CFG = 0x19,   ///< Monitor Multiplexer Configuration
-		REG_BOOT_CFG = 0x1A,   ///< Boot Configuration
-		REG_PIN_STATUS = 0x1B,   ///< Pin Status
-		REG_BUCK_EXTRA = 0x1C,   ///< Additional Buck Settings
-		REG_PWR_CFG = 0x1D,   ///< Power Configuration
-		REG_NULL = 0x1E,   ///< Reserved 0x1E
-		REG_PWR_OFF = 0x1F,   ///< Power Off Register
-		*/
-	};
-
-
-	int writeReg(registers_t reg, uint8_t value);
-	int readReg(registers_t reg, uint8_t &value);
-
-	/// I2C object
-	I2C  *m_i2c;
-
-	/// Device slave addresses
-	uint8_t m_writeAddress, m_readAddress;
-};
-
-#endif /* __MAX20303_H_ */
+/*******************************************************************************
+ * Copyright (C) 2018 Maxim Integrated Products, Inc., All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included
+ * in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+ * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+ * IN NO EVENT SHALL MAXIM INTEGRATED BE LIABLE FOR ANY CLAIM, DAMAGES
+ * OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Except as contained in this notice, the name of Maxim Integrated
+ * Products, Inc. shall not be used except as stated in the Maxim Integrated
+ * Products, Inc. Branding Policy.
+ *
+ * The mere transfer of this software does not imply any licenses
+ * of trade secrets, proprietary technology, copyrights, patents,
+ * trademarks, maskwork rights, or any other form of intellectual
+ * property whatsoever. Maxim Integrated Products, Inc. retains all
+ * ownership rights.
+ *******************************************************************************
+ */
+#ifndef __MAX20303_H_
+#define __MAX20303_H_
+
+#include "mbed.h"
+
+#define MAX20303_SLAVE_ADDR		(0x50 >> 1)
+#define MAX20303_SLAVE_WR_ADDR		((MAX20303_SLAVE_ADDR << 1))
+#define MAX20303_SLAVE_RD_ADDR		((MAX20303_SLAVE_ADDR << 1) | 1)
+
+
+#define MAX20303_NO_ERROR   0
+#define MAX20303_ERROR      -1
+
+#define MAX20303_I2C_ADDR_FUEL_GAUGE	0x6c
+
+#define MAX20303_LDO_MIN_MV 800
+#define MAX20303_LDO_MAX_MV 3600
+#define MAX20303_LDO_STEP_MV 100
+
+#define MAX20303_OFF_COMMAND 0xB2
+
+class MAX20303
+{
+
+public:
+	/**
+	 * @brief   Register Addresses
+	 * @details Enumerated MAX20303 register addresses
+	 */
+	enum registers_t {
+		REG_HARDWARE_ID		= 0x00,		///< HardwareID Register
+		REG_FIRMWARE_REV	= 0x01,		///< FirmwareID Register
+		//					= 0x02,		///<
+		REG_INT0			= 0x03,		///< Int0 Register
+		REG_INT1			= 0x04,		///< Int1 Register
+		REG_INT2			= 0x05,		///< Int2 Register
+		REG_STATUS0			= 0x06,		///< Status Register 0
+		REG_STATUS1			= 0x07,		///< Status Register 1
+		REG_STATUS2			= 0x08,		///< Status Register 2
+		REG_STATUS3			= 0x09,		///< Status Register 2
+		//					= 0x0A,		///<
+		REG_SYSTEM_ERROR	= 0x0B,		///< SystemError Register
+		REG_INT_MASK0		= 0x0C,		///< IntMask0 Register
+		REG_INT_MASK1		= 0x0D,		///< IntMask1 Register
+		REG_INT_MASK2		= 0x0E,		///< IntMask1 Register
+		REG_AP_DATOUT0		= 0x0F,     ///< APDataOut0 Register
+		REG_AP_DATOUT1		= 0x10,     ///< APDataOut1 Register
+		REG_AP_DATOUT2		= 0x11,     ///< APDataOut2 Register
+		REG_AP_DATOUT3		= 0x12,     ///< APDataOut3 Register
+		REG_AP_DATOUT4		= 0x13,     ///< APDataOut4 Register
+		REG_AP_DATOUT5		= 0x14,     ///< APDataOut5 Register
+		REG_AP_DATOUT6		= 0x15,     ///< APDataOut6 Register
+		REG_AP_CMDOUT		= 0x17,     ///< APCmdOut Register
+		REG_AP_RESPONSE		= 0x18,     ///< APResponse Register
+		REG_AP_DATAIN0		= 0x19,
+		REG_AP_DATAIN1		= 0x1A,
+		REG_AP_DATAIN2		= 0x1B,
+		REG_AP_DATAIN3		= 0x1C,
+		REG_AP_DATAIN4		= 0x1D,
+		REG_AP_DATAIN5		= 0x1E,
+		//					= 0x1F,		///<
+		REG_LDO_DIRECT		= 0x20,
+		REG_MPC_DIRECTWRITE	= 0x21,
+		REG_MPC_DIRECTRED	= 0x22,
+
+		REG_LED_STEP_DIRECT	= 0x2C,
+		REG_LED0_DIRECT		= 0x2D,
+		REG_LED1_DIRECT		= 0x2E,
+		REG_LED2_DIRECT		= 0x2F,
+
+
+		REG_LDO1_CONFIG_WRITE = 0x40,
+		REG_LDO1_CONFIG_READ  = 0x41,
+		REG_LDO2_CONFIG_WRITE = 0x42,
+		REG_LDO2_CONFIG_READ  = 0x43
+	};
+
+	/**
+	* @brief  Constructor using reference to I2C object
+	* @param i2c - Reference to I2C object
+	* @param slaveAddress - 7-bit I2C address
+	*/
+	MAX20303(I2C *i2c);
+
+	/** @brief Destructor */
+	~MAX20303(void);
+
+	int led0on(char enable);
+	int led1on(char enable);
+	int led2on(char enable);
+	int BoostEnable(void);
+	int BuckBoostEnable(void);
+
+	/// @brief Enable the 1.8V output rail **/
+	int LDO1Config(void);
+	int mv2bits(int mV);
+
+	/** @brief Power Off the board
+	 */
+	int PowerOffthePMIC();
+
+	/** @brief Soft reset the PMIC
+	 */
+	int SoftResetthePMIC();
+
+	/** @brief Hard reset the PMIC
+	 */
+	int HardResetthePMIC();
+
+	/** @brief check if can communicate with max20303
+	*/
+	char CheckPMICHWID();
+
+private:
+
+	int writeReg(registers_t reg, uint8_t value);
+	int readReg(registers_t reg, uint8_t &value);
+
+	int writeRegMulti(registers_t reg, uint8_t *value, uint8_t len);
+	int readRegMulti(registers_t reg, uint8_t *value, uint8_t len);
+
+	/// I2C object
+	I2C  *m_i2c;
+
+	/// Device slave addresses
+	uint8_t m_writeAddress, m_readAddress;
+
+	// Application Processor Interface Related Variables
+	uint8_t i2cbuffer_[16];
+	uint8_t appdatainoutbuffer_[8];
+	uint8_t appcmdoutvalue_;
+
+
+	/** @brief API Related Functions ***/
+
+	/***
+	 *  @brief  starts writing from ApResponse register 0x0F
+	 *  check the datasheet to determine the value of dataoutlen
+	 */
+	int AppWrite(uint8_t dataoutlen);
+
+	/** @brief starts reading from ApResponse register 0x18
+	 *  check the datasheet to determine the value of datainlen
+	 *  the result values are written into i2cbuffer
+	 *
+	*/
+	int AppRead(uint8_t datainlen);
+};
+
+#endif /* __MAX20303_H_ */