Diff: main.cpp

Revision:

10:e315ecdb7bcd

Parent:

8:5bbefd9bce9f

Child:

11:36f82087066e

--- a/main.cpp	Sun Jan 27 02:56:19 2019 +0000
+++ b/main.cpp	Sun Jan 27 07:26:59 2019 +0000
@@ -49,7 +49,7 @@
 /** (note the calls to Thread::wait below for delays) */
 /**
  * @brief Sample main program for Maxim Integrated MAX31723
- * @version 1.0000.0000
+ * @version 1.0000.0001
  *
  * @details Sample main program for MAX31723/MAX31722
  * The prints are sent to the terminal window (9600, 8n1).
@@ -68,6 +68,7 @@
 {
     int ret, i;
     float temperature;
+    uint8_t value;
     DigitalOut rLED(LED1, LED_OFF);
     DigitalOut gLED(LED2, LED_OFF);
     DigitalOut bLED(LED3, LED_OFF);
@@ -80,15 +81,19 @@
     /* Jumpers (JP1) on MAX31723PMB should be set to SPI mode configuration
      * or SERMODE pin should be set to VDD for SPI mode
      */
-
+    ret = max31723_temp.perform_one_shot_int(MAX31723_CFG_RESOLUTION_12BIT);
+    
     for (i = 0; i < 5; i++) {
-        ret = max31723_temp.perform_one_shot(MAX31723_CONV_TIME_MSEC_12BIT);
+        ret = max31723_temp.perform_one_shot_int(MAX31723_CFG_RESOLUTION_12BIT);
         wait(MAX31723_CONV_TIME_MSEC_12BIT);
         temperature = max31723_temp.read_temp();
         printf("Temperature = %4.4f Celsius, %4.4f Fahrenheit\r\n", 
             temperature, max31723_temp.celsius_to_fahrenheit(temperature));
         wait(2);
     } 
+    max31723_temp.read_reg(value, MAX31723_REG_CFG);
+    printf("Configuration Register = 0x%02Xh \r\n", value);
+
     printf("\r\n");
     while (true) {  // Blink the green LED 
         gLED = !gLED;