Maxim Integrated
Test program running on MAX32625MBED. Control through USB Serial commands using a terminal emulator such as teraterm or putty.
Dependencies: MaximTinyTester MAX11410 CmdLine USBDevice
Diff: Test_Main_MAX11410.cpp
- Revision:
- 54:ba810c1d6264
- Parent:
- 53:bf2793cd194b
- Child:
- 55:73d886c105f5
--- a/Test_Main_MAX11410.cpp Tue Feb 18 09:37:17 2020 +0000
+++ b/Test_Main_MAX11410.cpp Thu Feb 20 10:47:21 2020 +0000
@@ -505,6 +505,460 @@
#endif
+// uncrustify-0.66.1 *INDENT-OFF*
+//--------------------------------------------------
+// Declare the DigitalInOut GPIO pins
+// Optional digitalInOut support. If there is only one it should be digitalInOut1.
+// D) Digital High/Low/Input Pin
+#if defined(TARGET_MAX32630)
+// +-------------[microUSB]-------------+
+// | J1 MAX32630FTHR J2 |
+// | [ ] RST GND [ ] |
+// | [ ] 3V3 BAT+[ ] |
+// | [ ] 1V8 reset SW1 |
+// | [ ] GND J4 J3 |
+// | [ ] AIN_0 1.2Vfs (bat) SYS [ ] |
+// | [ ] AIN_1 1.2Vfs PWR [ ] |
+// | [ ] AIN_2 1.2Vfs +5V VBUS [ ] |
+// | [ ] AIN_3 1.2Vfs 1-WIRE P4_0 [ ] | dig9
+// dig10 | [x] P5_7 SDA2 SRN P5_6 [ ] | dig8
+// dig11 | [x] P6_0 SCL2 SDIO3 P5_5 [ ] | dig7
+// dig12 | [x] P5_0 SCLK SDIO2 P5_4 [ ] | dig6
+// dig13 | [x] P5_1 MOSI SSEL P5_3 [x] | dig5
+// dig14 | [ ] P5_2 MISO RTS P3_3 [ ] | dig4
+// dig15 | [ ] P3_0 RX CTS P3_2 [ ] | dig3
+// dig0 | [ ] P3_1 TX SCL P3_5 [x] | dig2
+// | [ ] GND SDA P3_4 [x] | dig1
+// +------------------------------------+
+ #define HAS_digitalInOut0 1 // P3_1 TARGET_MAX32630 J1.15
+ #define HAS_digitalInOut1 1 // P3_4 TARGET_MAX32630 J3.12
+ #define HAS_digitalInOut2 1 // P3_5 TARGET_MAX32630 J3.11
+ #define HAS_digitalInOut3 1 // P3_2 TARGET_MAX32630 J3.10
+ #define HAS_digitalInOut4 1 // P3_3 TARGET_MAX32630 J3.9
+ #define HAS_digitalInOut5 1 // P5_3 TARGET_MAX32630 J3.8
+ #define HAS_digitalInOut6 1 // P5_4 TARGET_MAX32630 J3.7
+ #define HAS_digitalInOut7 1 // P5_5 TARGET_MAX32630 J3.6
+ #define HAS_digitalInOut8 1 // P5_6 TARGET_MAX32630 J3.5
+ #define HAS_digitalInOut9 1 // P4_0 TARGET_MAX32630 J3.4
+#if HAS_I2C
+// avoid resource conflict between P5_7, P6_0 I2C and DigitalInOut
+ #define HAS_digitalInOut10 0 // P5_7 TARGET_MAX32630 J1.9
+ #define HAS_digitalInOut11 0 // P6_0 TARGET_MAX32630 J1.10
+#else // HAS_I2C
+ #define HAS_digitalInOut10 1 // P5_7 TARGET_MAX32630 J1.9
+ #define HAS_digitalInOut11 1 // P6_0 TARGET_MAX32630 J1.10
+#endif // HAS_I2C
+#if HAS_SPI
+// avoid resource conflict between P5_0, P5_1, P5_2 SPI and DigitalInOut
+ #define HAS_digitalInOut12 0 // P5_0 TARGET_MAX32630 J1.11
+ #define HAS_digitalInOut13 0 // P5_1 TARGET_MAX32630 J1.12
+ #define HAS_digitalInOut14 0 // P5_2 TARGET_MAX32630 J1.13
+ #define HAS_digitalInOut15 0 // P3_0 TARGET_MAX32630 J1.14
+#else // HAS_SPI
+ #define HAS_digitalInOut12 1 // P5_0 TARGET_MAX32630 J1.11
+ #define HAS_digitalInOut13 1 // P5_1 TARGET_MAX32630 J1.12
+ #define HAS_digitalInOut14 1 // P5_2 TARGET_MAX32630 J1.13
+ #define HAS_digitalInOut15 1 // P3_0 TARGET_MAX32630 J1.14
+#endif // HAS_SPI
+#if HAS_digitalInOut0
+ DigitalInOut digitalInOut0(P3_1, PIN_INPUT, PullUp, 1); // P3_1 TARGET_MAX32630 J1.15
+#endif
+#if HAS_digitalInOut1
+ DigitalInOut digitalInOut1(P3_4, PIN_INPUT, PullUp, 1); // P3_4 TARGET_MAX32630 J3.12
+#endif
+#if HAS_digitalInOut2
+ DigitalInOut digitalInOut2(P3_5, PIN_INPUT, PullUp, 1); // P3_5 TARGET_MAX32630 J3.11
+#endif
+#if HAS_digitalInOut3
+ DigitalInOut digitalInOut3(P3_2, PIN_INPUT, PullUp, 1); // P3_2 TARGET_MAX32630 J3.10
+#endif
+#if HAS_digitalInOut4
+ DigitalInOut digitalInOut4(P3_3, PIN_INPUT, PullUp, 1); // P3_3 TARGET_MAX32630 J3.9
+#endif
+#if HAS_digitalInOut5
+ DigitalInOut digitalInOut5(P5_3, PIN_INPUT, PullUp, 1); // P5_3 TARGET_MAX32630 J3.8
+#endif
+#if HAS_digitalInOut6
+ DigitalInOut digitalInOut6(P5_4, PIN_INPUT, PullUp, 1); // P5_4 TARGET_MAX32630 J3.7
+#endif
+#if HAS_digitalInOut7
+ DigitalInOut digitalInOut7(P5_5, PIN_INPUT, PullUp, 1); // P5_5 TARGET_MAX32630 J3.6
+#endif
+#if HAS_digitalInOut8
+ DigitalInOut digitalInOut8(P5_6, PIN_INPUT, PullUp, 1); // P5_6 TARGET_MAX32630 J3.5
+#endif
+#if HAS_digitalInOut9
+ DigitalInOut digitalInOut9(P4_0, PIN_INPUT, PullUp, 1); // P4_0 TARGET_MAX32630 J3.4
+#endif
+#if HAS_digitalInOut10
+ DigitalInOut digitalInOut10(P5_7, PIN_INPUT, PullUp, 1); // P5_7 TARGET_MAX32630 J1.9
+#endif
+#if HAS_digitalInOut11
+ DigitalInOut digitalInOut11(P6_0, PIN_INPUT, PullUp, 1); // P6_0 TARGET_MAX32630 J1.10
+#endif
+#if HAS_digitalInOut12
+ DigitalInOut digitalInOut12(P5_0, PIN_INPUT, PullUp, 1); // P5_0 TARGET_MAX32630 J1.11
+#endif
+#if HAS_digitalInOut13
+ DigitalInOut digitalInOut13(P5_1, PIN_INPUT, PullUp, 1); // P5_1 TARGET_MAX32630 J1.12
+#endif
+#if HAS_digitalInOut14
+ DigitalInOut digitalInOut14(P5_2, PIN_INPUT, PullUp, 1); // P5_2 TARGET_MAX32630 J1.13
+#endif
+#if HAS_digitalInOut15
+ DigitalInOut digitalInOut15(P3_0, PIN_INPUT, PullUp, 1); // P3_0 TARGET_MAX32630 J1.14
+#endif
+//--------------------------------------------------
+#elif defined(TARGET_MAX32625MBED)
+// TARGET=MAX32625MBED ARM Cortex-M4F 96MHz 512kB Flash 160kB SRAM
+// +-------------------------------------+
+// | MAX32625MBED Arduino UNO header |
+// | |
+// | A5/SCL[ ] | P1_7 dig15
+// | A4/SDA[ ] | P1_6 dig14
+// | AREF=N/C[ ] |
+// | GND[ ] |
+// | [ ]N/C SCK/13[ ] | P1_0 dig13
+// | [ ]IOREF=3V3 MISO/12[ ] | P1_2 dig12
+// | [ ]RST MOSI/11[ ]~| P1_1 dig11
+// | [ ]3V3 CS/10[ ]~| P1_3 dig10
+// | [ ]5V0 9[ ]~| P1_5 dig9
+// | [ ]GND 8[ ] | P1_4 dig8
+// | [ ]GND |
+// | [ ]Vin 7[ ] | P0_7 dig7
+// | 6[ ]~| P0_6 dig6
+// AIN_0 | [ ]A0 5[ ]~| P0_5 dig5
+// AIN_1 | [ ]A1 4[ ] | P0_4 dig4
+// AIN_2 | [ ]A2 INT1/3[ ]~| P0_3 dig3
+// AIN_3 | [ ]A3 INT0/2[ ] | P0_2 dig2
+// dig16 P3_4 | [ ]A4/SDA RST SCK MISO TX>1[ ] | P0_1 dig1
+// dig17 P3_5 | [ ]A5/SCL [ ] [ ] [ ] RX<0[ ] | P0_0 dig0
+// | [ ] [ ] [ ] |
+// | UNO_R3 GND MOSI 5V ____________/
+// \_______________________/
+//
+ #define HAS_digitalInOut0 1 // P0_0 TARGET_MAX32625MBED D0
+ #define HAS_digitalInOut1 1 // P0_1 TARGET_MAX32625MBED D1
+#if APPLICATION_MAX11131
+ #define HAS_digitalInOut2 0 // P0_2 TARGET_MAX32625MBED D2 -- MAX11131 EOC DigitalIn
+#else
+ #define HAS_digitalInOut2 1 // P0_2 TARGET_MAX32625MBED D2
+#endif
+ #define HAS_digitalInOut3 1 // P0_3 TARGET_MAX32625MBED D3
+ #define HAS_digitalInOut4 1 // P0_4 TARGET_MAX32625MBED D4
+ #define HAS_digitalInOut5 1 // P0_5 TARGET_MAX32625MBED D5
+ #define HAS_digitalInOut6 1 // P0_6 TARGET_MAX32625MBED D6
+ #define HAS_digitalInOut7 1 // P0_7 TARGET_MAX32625MBED D7
+ #define HAS_digitalInOut8 1 // P1_4 TARGET_MAX32625MBED D8
+#if APPLICATION_MAX11131
+ #define HAS_digitalInOut9 0 // P1_5 TARGET_MAX32625MBED D9 -- MAX11131 CNVST DigitalOut
+#else
+ #define HAS_digitalInOut9 1 // P1_5 TARGET_MAX32625MBED D9
+#endif
+#if HAS_SPI
+// avoid resource conflict between P5_0, P5_1, P5_2 SPI and DigitalInOut
+ #define HAS_digitalInOut10 0 // P1_3 TARGET_MAX32635MBED CS/10
+ #define HAS_digitalInOut11 0 // P1_1 TARGET_MAX32635MBED MOSI/11
+ #define HAS_digitalInOut12 0 // P1_2 TARGET_MAX32635MBED MISO/12
+ #define HAS_digitalInOut13 0 // P1_0 TARGET_MAX32635MBED SCK/13
+#else // HAS_SPI
+ #define HAS_digitalInOut10 1 // P1_3 TARGET_MAX32635MBED CS/10
+ #define HAS_digitalInOut11 1 // P1_1 TARGET_MAX32635MBED MOSI/11
+ #define HAS_digitalInOut12 1 // P1_2 TARGET_MAX32635MBED MISO/12
+ #define HAS_digitalInOut13 1 // P1_0 TARGET_MAX32635MBED SCK/13
+#endif // HAS_SPI
+#if HAS_I2C
+// avoid resource conflict between P5_7, P6_0 I2C and DigitalInOut
+ #define HAS_digitalInOut14 0 // P1_6 TARGET_MAX32635MBED A4/SDA (10pin digital connector)
+ #define HAS_digitalInOut15 0 // P1_7 TARGET_MAX32635MBED A5/SCL (10pin digital connector)
+ #define HAS_digitalInOut16 0 // P3_4 TARGET_MAX32635MBED A4/SDA (6pin analog connector)
+ #define HAS_digitalInOut17 0 // P3_5 TARGET_MAX32635MBED A5/SCL (6pin analog connector)
+#else // HAS_I2C
+ #define HAS_digitalInOut14 1 // P1_6 TARGET_MAX32635MBED A4/SDA (10pin digital connector)
+ #define HAS_digitalInOut15 1 // P1_7 TARGET_MAX32635MBED A5/SCL (10pin digital connector)
+ #define HAS_digitalInOut16 1 // P3_4 TARGET_MAX32635MBED A4/SDA (6pin analog connector)
+ #define HAS_digitalInOut17 1 // P3_5 TARGET_MAX32635MBED A5/SCL (6pin analog connector)
+#endif // HAS_I2C
+#if HAS_digitalInOut0
+ DigitalInOut digitalInOut0(P0_0, PIN_INPUT, PullUp, 1); // P0_0 TARGET_MAX32625MBED D0
+#endif
+#if HAS_digitalInOut1
+ DigitalInOut digitalInOut1(P0_1, PIN_INPUT, PullUp, 1); // P0_1 TARGET_MAX32625MBED D1
+#endif
+#if HAS_digitalInOut2
+ DigitalInOut digitalInOut2(P0_2, PIN_INPUT, PullUp, 1); // P0_2 TARGET_MAX32625MBED D2
+#endif
+#if HAS_digitalInOut3
+ DigitalInOut digitalInOut3(P0_3, PIN_INPUT, PullUp, 1); // P0_3 TARGET_MAX32625MBED D3
+#endif
+#if HAS_digitalInOut4
+ DigitalInOut digitalInOut4(P0_4, PIN_INPUT, PullUp, 1); // P0_4 TARGET_MAX32625MBED D4
+#endif
+#if HAS_digitalInOut5
+ DigitalInOut digitalInOut5(P0_5, PIN_INPUT, PullUp, 1); // P0_5 TARGET_MAX32625MBED D5
+#endif
+#if HAS_digitalInOut6
+ DigitalInOut digitalInOut6(P0_6, PIN_INPUT, PullUp, 1); // P0_6 TARGET_MAX32625MBED D6
+#endif
+#if HAS_digitalInOut7
+ DigitalInOut digitalInOut7(P0_7, PIN_INPUT, PullUp, 1); // P0_7 TARGET_MAX32625MBED D7
+#endif
+#if HAS_digitalInOut8
+ DigitalInOut digitalInOut8(P1_4, PIN_INPUT, PullUp, 1); // P1_4 TARGET_MAX32625MBED D8
+#endif
+#if HAS_digitalInOut9
+ DigitalInOut digitalInOut9(P1_5, PIN_INPUT, PullUp, 1); // P1_5 TARGET_MAX32625MBED D9
+#endif
+#if HAS_digitalInOut10
+ DigitalInOut digitalInOut10(P1_3, PIN_INPUT, PullUp, 1); // P1_3 TARGET_MAX32635MBED CS/10
+#endif
+#if HAS_digitalInOut11
+ DigitalInOut digitalInOut11(P1_1, PIN_INPUT, PullUp, 1); // P1_1 TARGET_MAX32635MBED MOSI/11
+#endif
+#if HAS_digitalInOut12
+ DigitalInOut digitalInOut12(P1_2, PIN_INPUT, PullUp, 1); // P1_2 TARGET_MAX32635MBED MISO/12
+#endif
+#if HAS_digitalInOut13
+ DigitalInOut digitalInOut13(P1_0, PIN_INPUT, PullUp, 1); // P1_0 TARGET_MAX32635MBED SCK/13
+#endif
+#if HAS_digitalInOut14
+ // Ensure that the unused I2C pins do not interfere with analog inputs A4 and A5
+ // DigitalInOut mode can be one of PullUp, PullDown, PullNone, OpenDrain
+ DigitalInOut digitalInOut14(P1_6, PIN_INPUT, OpenDrain, 1); // P1_6 TARGET_MAX32635MBED A4/SDA (10pin digital connector)
+#endif
+#if HAS_digitalInOut15
+ // Ensure that the unused I2C pins do not interfere with analog inputs A4 and A5
+ DigitalInOut digitalInOut15(P1_7, PIN_INPUT, OpenDrain, 1); // P1_7 TARGET_MAX32635MBED A5/SCL (10pin digital connector)
+#endif
+#if HAS_digitalInOut16
+ // Ensure that the unused I2C pins do not interfere with analog inputs A4 and A5
+ // DigitalInOut mode can be one of PullUp, PullDown, PullNone, OpenDrain
+ // PullUp-->3.4V, PullDown-->1.7V, PullNone-->3.5V, OpenDrain-->0.00V
+ DigitalInOut digitalInOut16(P3_4, PIN_INPUT, OpenDrain, 0); // P3_4 TARGET_MAX32635MBED A4/SDA (6pin analog connector)
+#endif
+#if HAS_digitalInOut17
+ // Ensure that the unused I2C pins do not interfere with analog inputs A4 and A5
+ DigitalInOut digitalInOut17(P3_5, PIN_INPUT, OpenDrain, 0); // P3_5 TARGET_MAX32635MBED A5/SCL (6pin analog connector)
+#endif
+//--------------------------------------------------
+#elif defined(TARGET_NUCLEO_F446RE) || defined(TARGET_NUCLEO_F401RE)
+ #define HAS_digitalInOut0 0 // P0_0 TARGET_MAX32625MBED D0
+ #define HAS_digitalInOut1 0 // P0_1 TARGET_MAX32625MBED D1
+#if APPLICATION_MAX11131
+ #define HAS_digitalInOut2 0 // P0_2 TARGET_MAX32625MBED D2 -- MAX11131 EOC DigitalIn
+#else
+ #define HAS_digitalInOut2 1 // P0_2 TARGET_MAX32625MBED D2
+#endif
+ #define HAS_digitalInOut3 1 // P0_3 TARGET_MAX32625MBED D3
+ #define HAS_digitalInOut4 1 // P0_4 TARGET_MAX32625MBED D4
+ #define HAS_digitalInOut5 1 // P0_5 TARGET_MAX32625MBED D5
+ #define HAS_digitalInOut6 1 // P0_6 TARGET_MAX32625MBED D6
+ #define HAS_digitalInOut7 1 // P0_7 TARGET_MAX32625MBED D7
+#if APPLICATION_MAX5715
+ #define HAS_digitalInOut8 0 // P1_4 TARGET_MAX32625MBED D8 -- MAX5715 CLRb DigitalOut
+#else
+ #define HAS_digitalInOut8 1 // P1_4 TARGET_MAX32625MBED D8
+#endif
+#if APPLICATION_MAX5715
+ #define HAS_digitalInOut9 0 // P1_5 TARGET_MAX32625MBED D9 -- MAX5715 LDACb DigitalOut
+#elif APPLICATION_MAX11131
+ #define HAS_digitalInOut9 0 // P1_5 TARGET_MAX32625MBED D9 -- MAX11131 CNVST DigitalOut
+#else
+ #define HAS_digitalInOut9 1 // P1_5 TARGET_MAX32625MBED D9
+#endif
+#if HAS_SPI
+// avoid resource conflict between P5_0, P5_1, P5_2 SPI and DigitalInOut
+ // Arduino digital pin D10 SPI function is CS/10
+ // Arduino digital pin D11 SPI function is MOSI/11
+ // Arduino digital pin D12 SPI function is MISO/12
+ // Arduino digital pin D13 SPI function is SCK/13
+ #define HAS_digitalInOut10 0
+ #define HAS_digitalInOut11 0
+ #define HAS_digitalInOut12 0
+ #define HAS_digitalInOut13 0
+#else // HAS_SPI
+ #define HAS_digitalInOut10 1
+ #define HAS_digitalInOut11 1
+ #define HAS_digitalInOut12 1
+ #define HAS_digitalInOut13 1
+#endif // HAS_SPI
+#if HAS_I2C
+// avoid resource conflict between P5_7, P6_0 I2C and DigitalInOut
+ // Arduino digital pin D14 I2C function is A4/SDA (10pin digital connector)
+ // Arduino digital pin D15 I2C function is A5/SCL (10pin digital connector)
+ // Arduino digital pin D16 I2C function is A4/SDA (6pin analog connector)
+ // Arduino digital pin D17 I2C function is A5/SCL (6pin analog connector)
+ #define HAS_digitalInOut14 0
+ #define HAS_digitalInOut15 0
+ #define HAS_digitalInOut16 0
+ #define HAS_digitalInOut17 0
+#else // HAS_I2C
+ #define HAS_digitalInOut14 1
+ #define HAS_digitalInOut15 1
+ #define HAS_digitalInOut16 0
+ #define HAS_digitalInOut17 0
+#endif // HAS_I2C
+#if HAS_digitalInOut0
+ DigitalInOut digitalInOut0(D0, PIN_INPUT, PullUp, 1);
+#endif
+#if HAS_digitalInOut1
+ DigitalInOut digitalInOut1(D1, PIN_INPUT, PullUp, 1);
+#endif
+#if HAS_digitalInOut2
+ DigitalInOut digitalInOut2(D2, PIN_INPUT, PullUp, 1);
+#endif
+#if HAS_digitalInOut3
+ DigitalInOut digitalInOut3(D3, PIN_INPUT, PullUp, 1);
+#endif
+#if HAS_digitalInOut4
+ DigitalInOut digitalInOut4(D4, PIN_INPUT, PullUp, 1);
+#endif
+#if HAS_digitalInOut5
+ DigitalInOut digitalInOut5(D5, PIN_INPUT, PullUp, 1);
+#endif
+#if HAS_digitalInOut6
+ DigitalInOut digitalInOut6(D6, PIN_INPUT, PullUp, 1);
+#endif
+#if HAS_digitalInOut7
+ DigitalInOut digitalInOut7(D7, PIN_INPUT, PullUp, 1);
+#endif
+#if HAS_digitalInOut8
+ DigitalInOut digitalInOut8(D8, PIN_INPUT, PullUp, 1);
+#endif
+#if HAS_digitalInOut9
+ DigitalInOut digitalInOut9(D9, PIN_INPUT, PullUp, 1);
+#endif
+#if HAS_digitalInOut10
+ // Arduino digital pin D10 SPI function is CS/10
+ DigitalInOut digitalInOut10(D10, PIN_INPUT, PullUp, 1);
+#endif
+#if HAS_digitalInOut11
+ // Arduino digital pin D11 SPI function is MOSI/11
+ DigitalInOut digitalInOut11(D11, PIN_INPUT, PullUp, 1);
+#endif
+#if HAS_digitalInOut12
+ // Arduino digital pin D12 SPI function is MISO/12
+ DigitalInOut digitalInOut12(D12, PIN_INPUT, PullUp, 1);
+#endif
+#if HAS_digitalInOut13
+ // Arduino digital pin D13 SPI function is SCK/13
+ DigitalInOut digitalInOut13(D13, PIN_INPUT, PullUp, 1);
+#endif
+#if HAS_digitalInOut14
+ // Arduino digital pin D14 I2C function is A4/SDA (10pin digital connector)
+ DigitalInOut digitalInOut14(D14, PIN_INPUT, PullUp, 1);
+#endif
+#if HAS_digitalInOut15
+ // Arduino digital pin D15 I2C function is A5/SCL (10pin digital connector)
+ DigitalInOut digitalInOut15(D15, PIN_INPUT, PullUp, 1);
+#endif
+#if HAS_digitalInOut16
+ // Arduino digital pin D16 I2C function is A4/SDA (6pin analog connector)
+ DigitalInOut digitalInOut16(D16, PIN_INPUT, PullUp, 1);
+#endif
+#if HAS_digitalInOut17
+ // Arduino digital pin D17 I2C function is A5/SCL (6pin analog connector)
+ DigitalInOut digitalInOut17(D17, PIN_INPUT, PullUp, 1);
+#endif
+//--------------------------------------------------
+#elif defined(TARGET_LPC1768)
+ #define HAS_digitalInOut0 1
+ #define HAS_digitalInOut1 1
+ #define HAS_digitalInOut2 1
+ #define HAS_digitalInOut3 1
+ #define HAS_digitalInOut4 1
+ #define HAS_digitalInOut5 1
+ #define HAS_digitalInOut6 1
+ #define HAS_digitalInOut7 1
+ #define HAS_digitalInOut8 1
+ #define HAS_digitalInOut9 1
+// #define HAS_digitalInOut10 1
+// #define HAS_digitalInOut11 1
+// #define HAS_digitalInOut12 1
+// #define HAS_digitalInOut13 1
+// #define HAS_digitalInOut14 1
+// #define HAS_digitalInOut15 1
+#if HAS_digitalInOut0
+ DigitalInOut digitalInOut0(p5, PIN_INPUT, PullUp, 1); // TARGET_LPC1768 P0.9/I2STX_SDA/MOSI1/MAT2.3
+#endif
+#if HAS_digitalInOut1
+ DigitalInOut digitalInOut1(p6, PIN_INPUT, PullUp, 1); // TARGET_LPC1768 P0.8/I2STX_WS/MISO1/MAT2.2
+#endif
+#if HAS_digitalInOut2
+ DigitalInOut digitalInOut2(p7, PIN_INPUT, PullUp, 1); // TARGET_LPC1768 P0.7/I2STX_CLK/SCK1/MAT2.1
+#endif
+#if HAS_digitalInOut3
+ DigitalInOut digitalInOut3(p8, PIN_INPUT, PullUp, 1); // TARGET_LPC1768 P0.6/I2SRX_SDA/SSEL1/MAT2.0
+#endif
+#if HAS_digitalInOut4
+ DigitalInOut digitalInOut4(p9, PIN_INPUT, PullUp, 1); // TARGET_LPC1768 P0.0/CAN_RX1/TXD3/SDA1
+#endif
+#if HAS_digitalInOut5
+ DigitalInOut digitalInOut5(p10, PIN_INPUT, PullUp, 1); // TARGET_LPC1768 P0.1/CAN_TX1/RXD3/SCL1
+#endif
+#if HAS_digitalInOut6
+ DigitalInOut digitalInOut6(p11, PIN_INPUT, PullUp, 1); // TARGET_LPC1768 P0.18/DCD1/MOSI0/MOSI1
+#endif
+#if HAS_digitalInOut7
+ DigitalInOut digitalInOut7(p12, PIN_INPUT, PullUp, 1); // TARGET_LPC1768 P0.17/CTS1/MISO0/MISO
+#endif
+#if HAS_digitalInOut8
+ DigitalInOut digitalInOut8(p13, PIN_INPUT, PullUp, 1); // TARGET_LPC1768 P0.15/TXD1/SCK0/SCK
+#endif
+#if HAS_digitalInOut9
+ DigitalInOut digitalInOut9(p14, PIN_INPUT, PullUp, 1); // TARGET_LPC1768 P0.16/RXD1/SSEL0/SSEL
+#endif
+ //
+ // these pins support analog input analogIn0 .. analogIn5
+ //DigitalInOut digitalInOut_(p15, PIN_INPUT, PullUp, 1); // TARGET_LPC1768 P0.23/AD0.0/I2SRX_CLK/CAP3.0
+ //DigitalInOut digitalInOut_(p16, PIN_INPUT, PullUp, 1); // TARGET_LPC1768 P0.24/AD0.1/I2SRX_WS/CAP3.1
+ //DigitalInOut digitalInOut_(p17, PIN_INPUT, PullUp, 1); // TARGET_LPC1768 P0.25/AD0.2/I2SRX_SDA/TXD3
+ //DigitalInOut digitalInOut_(p18, PIN_INPUT, PullUp, 1); // TARGET_LPC1768 P0.26/AD0.3/AOUT/RXD3
+ //DigitalInOut digitalInOut_(p19, PIN_INPUT, PullUp, 1); // TARGET_LPC1768 P1.30/VBUS/AD0.4
+ //DigitalInOut digitalInOut_(p20, PIN_INPUT, PullUp, 1); // TARGET_LPC1768 P1.31/SCK1/AD0.5
+ //
+ // these pins support PWM pwmDriver1 .. pwmDriver6
+ //DigitalInOut digitalInOut_(p21, PIN_INPUT, PullUp, 1); // TARGET_LPC1768 P2.5/PWM1.6/DTR1/TRACEDATA0
+ //DigitalInOut digitalInOut_(p22, PIN_INPUT, PullUp, 1); // TARGET_LPC1768 P2.4/PWM1.5/DSR1/TRACEDATA1
+ //DigitalInOut digitalInOut_(p23, PIN_INPUT, PullUp, 1); // TARGET_LPC1768 P2.3/PWM1.4/DCD1/TRACEDATA2
+ //DigitalInOut digitalInOut_(p24, PIN_INPUT, PullUp, 1); // TARGET_LPC1768 P2.2/PWM1.3/CTS1/TRACEDATA3
+ //DigitalInOut digitalInOut_(p25, PIN_INPUT, PullUp, 1); // TARGET_LPC1768 P2.1/PWM1.2/RXD1
+ //DigitalInOut digitalInOut_(p26, PIN_INPUT, PullUp, 1); // TARGET_LPC1768 P2.0/PWM1.1/TXD1/TRACECLK
+ //
+ // these could be additional digitalInOut pins
+#if HAS_digitalInOut10
+ DigitalInOut digitalInOut10(p27, PIN_INPUT, PullUp, 1); // TARGET_LPC1768 P0.11/RXD2/SCL2/MAT3.1
+#endif
+#if HAS_digitalInOut11
+ DigitalInOut digitalInOut11(p28, PIN_INPUT, PullUp, 1); // TARGET_LPC1768 P0.10/TXD2/SDA2/MAT3.0
+#endif
+#if HAS_digitalInOut12
+ DigitalInOut digitalInOut12(p29, PIN_INPUT, PullUp, 1); // TARGET_LPC1768 P0.5/I2SRX_WS/CAN_TX2/CAP2.1
+#endif
+#if HAS_digitalInOut13
+ DigitalInOut digitalInOut13(p30, PIN_INPUT, PullUp, 1); // TARGET_LPC1768 P0.4/I2SRX_CLK/CAN_RX2/CAP2.0
+#endif
+#if HAS_digitalInOut14
+ DigitalInOut digitalInOut14(___, PIN_INPUT, PullUp, 1);
+#endif
+#if HAS_digitalInOut15
+ DigitalInOut digitalInOut15(___, PIN_INPUT, PullUp, 1);
+#endif
+#else
+ // unknown target
+#endif
+// uncrustify-0.66.1 *INDENT-ON*
+#if HAS_digitalInOut0 || HAS_digitalInOut1 \
+ || HAS_digitalInOut2 || HAS_digitalInOut3 \
+ || HAS_digitalInOut4 || HAS_digitalInOut5 \
+ || HAS_digitalInOut6 || HAS_digitalInOut7 \
+ || HAS_digitalInOut8 || HAS_digitalInOut9 \
+ || HAS_digitalInOut10 || HAS_digitalInOut11 \
+ || HAS_digitalInOut12 || HAS_digitalInOut13 \
+ || HAS_digitalInOut14 || HAS_digitalInOut15 \
+ || HAS_digitalInOut16 || HAS_digitalInOut17
+#define HAS_digitalInOuts 1
+#endif
// uncrustify-0.66.1 *INDENT-OFF*
//--------------------------------------------------
@@ -856,6 +1310,132 @@
#define HAS_analogIns 1
#endif
+// DigitalInOut pin resource: print the pin index names to serial
+#if HAS_digitalInOuts
+void list_digitalInOutPins(Stream& serialStream)
+{
+#if HAS_digitalInOut0
+ serialStream.printf(" 0");
+#endif
+#if HAS_digitalInOut1
+ serialStream.printf(" 1");
+#endif
+#if HAS_digitalInOut2
+ serialStream.printf(" 2");
+#endif
+#if HAS_digitalInOut3
+ serialStream.printf(" 3");
+#endif
+#if HAS_digitalInOut4
+ serialStream.printf(" 4");
+#endif
+#if HAS_digitalInOut5
+ serialStream.printf(" 5");
+#endif
+#if HAS_digitalInOut6
+ serialStream.printf(" 6");
+#endif
+#if HAS_digitalInOut7
+ serialStream.printf(" 7");
+#endif
+#if HAS_digitalInOut8
+ serialStream.printf(" 8");
+#endif
+#if HAS_digitalInOut9
+ serialStream.printf(" 9");
+#endif
+#if HAS_digitalInOut10
+ serialStream.printf(" 10");
+#endif
+#if HAS_digitalInOut11
+ serialStream.printf(" 11");
+#endif
+#if HAS_digitalInOut12
+ serialStream.printf(" 12");
+#endif
+#if HAS_digitalInOut13
+ serialStream.printf(" 13");
+#endif
+#if HAS_digitalInOut14
+ serialStream.printf(" 14");
+#endif
+#if HAS_digitalInOut15
+ serialStream.printf(" 15");
+#endif
+#if HAS_digitalInOut16
+ serialStream.printf(" 16");
+#endif
+#if HAS_digitalInOut17
+ serialStream.printf(" 17");
+#endif
+}
+#endif
+
+
+// DigitalInOut pin resource: search index
+#if HAS_digitalInOuts
+DigitalInOut& find_digitalInOutPin(int cPinIndex)
+{
+ switch (cPinIndex)
+ {
+ default: // default to the first defined digitalInOut pin
+#if HAS_digitalInOut0
+ case '0': case 0x00: return digitalInOut0;
+#endif
+#if HAS_digitalInOut1
+ case '1': case 0x01: return digitalInOut1;
+#endif
+#if HAS_digitalInOut2
+ case '2': case 0x02: return digitalInOut2;
+#endif
+#if HAS_digitalInOut3
+ case '3': case 0x03: return digitalInOut3;
+#endif
+#if HAS_digitalInOut4
+ case '4': case 0x04: return digitalInOut4;
+#endif
+#if HAS_digitalInOut5
+ case '5': case 0x05: return digitalInOut5;
+#endif
+#if HAS_digitalInOut6
+ case '6': case 0x06: return digitalInOut6;
+#endif
+#if HAS_digitalInOut7
+ case '7': case 0x07: return digitalInOut7;
+#endif
+#if HAS_digitalInOut8
+ case '8': case 0x08: return digitalInOut8;
+#endif
+#if HAS_digitalInOut9
+ case '9': case 0x09: return digitalInOut9;
+#endif
+#if HAS_digitalInOut10
+ case 'a': case 0x0a: return digitalInOut10;
+#endif
+#if HAS_digitalInOut11
+ case 'b': case 0x0b: return digitalInOut11;
+#endif
+#if HAS_digitalInOut12
+ case 'c': case 0x0c: return digitalInOut12;
+#endif
+#if HAS_digitalInOut13
+ case 'd': case 0x0d: return digitalInOut13;
+#endif
+#if HAS_digitalInOut14
+ case 'e': case 0x0e: return digitalInOut14;
+#endif
+#if HAS_digitalInOut15
+ case 'f': case 0x0f: return digitalInOut15;
+#endif
+#if HAS_digitalInOut16
+ case 'g': case 0x10: return digitalInOut16;
+#endif
+#if HAS_digitalInOut17
+ case 'h': case 0x11: return digitalInOut17;
+#endif
+ }
+}
+#endif
// AnalogIn pin resource: search index