Diff: Test_Main_MAX11410.cpp

Revision:

76:77f8dcd1d453

Parent:

72:118719cf19c6

--- a/Test_Main_MAX11410.cpp	Fri Jun 05 00:33:19 2020 +0000
+++ b/Test_Main_MAX11410.cpp	Tue Oct 27 01:04:03 2020 +0000
@@ -64,9 +64,20 @@
 //      - add https://os.mbed.com/teams/MaximIntegrated/code/MAX32620FTHR/
 //      - not tested yet
 //   - MAX32625PICO
+//      - #include "max32625pico.h"
+//      - add https://os.mbed.com/users/switches/code/max32625pico/
 //      - remove max32630fthr library (if present)
 //      - remove MAX32620FTHR library (if present)
 //      - not tested yet
+//      - see https://os.mbed.com/users/switches/code/max32625pico/
+//      - see https://os.mbed.com/users/switches/code/PICO_board_demo/
+//      - see https://os.mbed.com/users/switches/code/PICO_USB_I2C_SPI/
+//      - see https://os.mbed.com/users/switches/code/SerialInterface/
+//      - Note: To load the MAX32625PICO firmware, hold the button while
+//        connecting the USB cable, then copy firmware bin file 
+//        to the MAINTENANCE drive.
+//      - see https://os.mbed.com/platforms/MAX32625PICO/
+//      - see https://os.mbed.com/teams/MaximIntegrated/wiki/MAX32625PICO-Firmware-Updates
 //
 // end Platform_Include_Boilerplate
 #include "MAX11410.h"
@@ -79,6 +90,9 @@
 #if defined(TARGET_MAX32625MBED)
 #include "USBSerial.h"
 USBSerial serial; // virtual serial port over USB (DEV connector)
+#elif defined(TARGET_MAX32625PICO)
+#include "USBSerial.h"
+USBSerial serial; // virtual serial port over USB (DEV connector)
 #elif defined(TARGET_MAX32600MBED)
 #include "USBSerial.h"
 USBSerial serial; // virtual serial port over USB (DEV connector)
@@ -374,6 +388,25 @@
 //--------------------------------------------------
 #elif defined(TARGET_MAX32625PICO)
 #warning "TARGET_MAX32625PICO not previously tested; need to define pins..."
+#include "max32625pico.h"
+// configure MAX32625PICO VDDIOH mode, and I/O voltages for DIP pins and SWD pins
+MAX32625PICO pico(
+    // vddioh_mode_t iohMode
+    //~ MAX32625PICO::IOH_OFF, // No connections to VDDIOH
+    //~ MAX32625PICO::IOH_DIP_IN, // VDDIOH input from DIP pin 1 (AIN0)
+    //~ MAX32625PICO::IOH_SWD_IN, // VDDIOH input from SWD pin 1
+    MAX32625PICO::IOH_3V3, // VDDIOH = 3.3V from local supply
+    //~ MAX32625PICO::IOH_DIP_OUT, // VDDIOH = 3.3V output to DIP pin 1
+    //~ MAX32625PICO::IOH_SWD_OUT, // VDDIOH = 3.3V output to SWD pin 1
+    //
+    // vio_t dipVio = MAX32625PICO::VIO_1V8 or MAX32625PICO::VIO_IOH
+    //~ MAX32625PICO::VIO_1V8, // 1.8V IO (local)
+    MAX32625PICO::VIO_IOH, // Use VDDIOH (from DIP pin 1, or SWD pin1, or local 3.3V)
+    //
+    // vio_t swdVio
+    //~ MAX32625PICO::VIO_1V8  // 1.8V IO (local)
+    MAX32625PICO::VIO_IOH  // Use VDDIOH (from DIP pin 1, or SWD pin1, or local 3.3V)
+    );
 //#define USE_LEDS 0 ?
 #define analogIn4_IS_HIGH_RANGE_OF_analogIn0 1
 #warning "TARGET_MAX32625PICO not previously tested; need to verify ADC_FULL_SCALE_VOLTAGE..."
@@ -1545,7 +1578,7 @@
     ADC_FULL_SCALE_VOLTAGE, // analogIn13
     ADC_FULL_SCALE_VOLTAGE, // analogIn14
     ADC_FULL_SCALE_VOLTAGE // analogIn15
-#elif defined(TARGET_MAX32625MBED)
+#elif defined(TARGET_MAX32625MBED) || defined(TARGET_MAX32625PICO)
     ADC_FULL_SCALE_VOLTAGE * 1.0f, // analogIn0 // fullscale is 1.2V
     ADC_FULL_SCALE_VOLTAGE * 1.0f, // analogIn1 // fullscale is 1.2V
     ADC_FULL_SCALE_VOLTAGE * 1.0f, // analogIn2 // fullscale is 1.2V
@@ -1635,6 +1668,9 @@
 #elif defined(TARGET_MAX32625MBED)
 # define LED_ON  0
 # define LED_OFF 1
+#elif defined(TARGET_MAX32625PICO)
+# define LED_ON  0
+# define LED_OFF 1
 //--------------------------------------------------
 // TODO1: TARGET=MAX32625MBED ARM Cortex-M4F 96MHz 512kB Flash 160kB SRAM
 #elif defined(TARGET_LPC1768)
@@ -1702,12 +1738,36 @@
 #define D11 P1_1
 #define D12 P1_2
 #define D13 P1_0
+#elif defined(TARGET_MAX32625PICO)
+#warning "TARGET_MAX32625PICO not previously tested; need to define pins..."
+#define A0 AIN_1
+#define A1 AIN_2
+// #define A2 AIN_3
+// #define A3 AIN_0
+#define D0 P0_0
+#define D1 P0_1
+#define D2 P0_2
+#define D3 P0_3
+#define D4 P1_7
+#define D5 P1_6
+#define D6 P4_4
+#define D7 P4_5
+#define D8 P4_6
+#define D9 P4_7
+#define D10 P0_7
+#define D11 P0_6
+#define D12 P0_5
+#define D13 P0_4
 #endif
 
 // example code declare SPI interface (GPIO controlled CS)
 #if defined(TARGET_MAX32625MBED)
 SPI spi(SPI1_MOSI, SPI1_MISO, SPI1_SCK); // mosi, miso, sclk spi1 TARGET_MAX32625MBED: P1_1 P1_2 P1_0 Arduino 10-pin header D11 D12 D13
 DigitalOut spi_cs(SPI1_SS); // TARGET_MAX32625MBED: P1_3 Arduino 10-pin header D10
+#elif defined(TARGET_MAX32625PICO)
+#warning "TARGET_MAX32625PICO not previously tested; need to define pins..."
+SPI spi(SPI0_MOSI, SPI0_MISO, SPI0_SCK); // mosi, miso, sclk spi1 TARGET_MAX32625PICO: pin P0_5 P0_6 P0_4
+DigitalOut spi_cs(SPI0_SS); // TARGET_MAX32625PICO: pin P0_7
 #elif defined(TARGET_MAX32600MBED)
 SPI spi(SPI2_MOSI, SPI2_MISO, SPI2_SCK); // mosi, miso, sclk spi1 TARGET_MAX32600MBED: Arduino 10-pin header D11 D12 D13
 DigitalOut spi_cs(SPI2_SS); // Generic: Arduino 10-pin header D10
@@ -5851,6 +5911,8 @@
         // example code: serial port banner message
     #if defined(TARGET_MAX32625MBED)
         serial.printf("MAX32625MBED ");
+    #elif defined(TARGET_MAX32625PICO)
+        serial.printf("MAX32625PICO ");
     #elif defined(TARGET_MAX32600MBED)
         serial.printf("MAX32600MBED ");
     #elif defined(TARGET_NUCLEO_F446RE)