Device interface library for multiple platforms including Mbed.
Dependents: DeepCover Embedded Security in IoT MaximInterface MAXREFDES155#
Maxim Interface is a library framework focused on providing flexible and expressive hardware interfaces. Both communication interfaces such as I2C and 1-Wire and device interfaces such as DS18B20 are supported. Modern C++ concepts are used extensively while keeping compatibility with C++98/C++03 and requiring no external dependencies. The embedded-friendly design does not depend on exceptions or RTTI.
The full version of the project is hosted on GitLab: https://gitlab.com/iabenz/MaximInterface
Diff: MaximInterfaceDevices/DS2431.hpp
- Revision:
- 7:9cd16581b578
- Child:
- 8:5ea891c7d1a1
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/MaximInterfaceDevices/DS2431.hpp Mon Jul 22 11:44:07 2019 -0500 @@ -0,0 +1,126 @@ +/******************************************************************************* +* Copyright (C) 2017 Maxim Integrated Products, Inc., All Rights Reserved. +* +* Permission is hereby granted, free of charge, to any person obtaining a +* copy of this software and associated documentation files (the "Software"), +* to deal in the Software without restriction, including without limitation +* the rights to use, copy, modify, merge, publish, distribute, sublicense, +* and/or sell copies of the Software, and to permit persons to whom the +* Software is furnished to do so, subject to the following conditions: +* +* The above copyright notice and this permission notice shall be included +* in all copies or substantial portions of the Software. +* +* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS +* OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF +* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. +* IN NO EVENT SHALL MAXIM INTEGRATED BE LIABLE FOR ANY CLAIM, DAMAGES +* OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, +* ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR +* OTHER DEALINGS IN THE SOFTWARE. +* +* Except as contained in this notice, the name of Maxim Integrated +* Products, Inc. shall not be used except as stated in the Maxim Integrated +* Products, Inc. Branding Policy. +* +* The mere transfer of this software does not imply any licenses +* of trade secrets, proprietary technology, copyrights, patents, +* trademarks, maskwork rights, or any other form of intellectual +* property whatsoever. Maxim Integrated Products, Inc. retains all +* ownership rights. +*******************************************************************************/ + +#ifndef MaximInterfaceDevices_DS2431 +#define MaximInterfaceDevices_DS2431 + +#include <MaximInterfaceCore/array_span.hpp> +#include <MaximInterfaceCore/SelectRom.hpp> +#include <MaximInterfaceCore/Sleep.hpp> +#include "Config.hpp" + +namespace MaximInterfaceDevices { + +/// @brief DS2431 1024-bit 1-Wire EEPROM +/// @details The DS2431 is a 1024-bit, 1-Wire® EEPROM chip organized +/// as four memory pages of 256 bits each. Data is written to an 8-byte +/// scratchpad, verified, and then copied to the EEPROM memory. As a +/// special feature, the four memory pages can individually be write +/// protected or put in EPROM-emulation mode, where bits can only be +/// changed from a 1 to a 0 state. The DS2431 communicates over the +/// single-conductor 1-Wire bus. The communication follows the standard +/// 1-Wire protocol. Each device has its own unalterable and unique +/// 64-bit ROM registration number that is factory lasered into the chip. +/// The registration number is used to address the device in a multidrop, +/// 1-Wire net environment. +class DS2431 { +public: + enum ErrorValue { CrcError = 1, OperationFailure }; + + typedef Core::array_span<uint_least8_t, 8> Scratchpad; + typedef uint_least8_t Address; + + DS2431(Core::Sleep & sleep, Core::OneWireMaster & master, + const Core::SelectRom & selectRom) + : selectRom(selectRom), master(&master), sleep(&sleep) {} + + void setSleep(Core::Sleep & sleep) { this->sleep = &sleep; } + + void setMaster(Core::OneWireMaster & master) { this->master = &master; } + + void setSelectRom(const Core::SelectRom & selectRom) { + this->selectRom = selectRom; + } + + /// @brief Reads block of data from EEPROM memory. + /// @param[in] beginAddress EEPROM memory address to start reading from. + /// @param[out] data EEPROM data read from the device. + MaximInterfaceDevices_EXPORT Core::error_code + readMemory(Address beginAddress, Core::span<uint_least8_t> data) const; + + /// @brief Writes 8 bytes to the scratchpad. + /// @param[in] targetAddress + /// EEPROM memory address that this data will be copied to. + /// Must be on row boundary. + /// @param[in] data Data to write to scratchpad. + MaximInterfaceDevices_EXPORT Core::error_code + writeScratchpad(Address targetAddress, Scratchpad::const_span data); + + /// @brief Reads contents of scratchpad. + /// @param[out] data Data read from scratchpad. + /// @param[out] esByte E/S byte read before scratchpad data. + MaximInterfaceDevices_EXPORT Core::error_code + readScratchpad(Scratchpad::span data, uint_least8_t & esByte); + + /// @brief Copies contents of scratchpad to EEPROM. + /// @param[in] targetAddress EEPROM memory address that scratchpad + /// will be copied to. Must be on row boundary. + /// @param[in] esByte E/S byte from preceding Read Scratchpad command. + MaximInterfaceDevices_EXPORT Core::error_code + copyScratchpad(Address targetAddress, uint_least8_t esByte); + + MaximInterfaceDevices_EXPORT static const Core::error_category & + errorCategory(); + +private: + Core::SelectRom selectRom; + Core::OneWireMaster * master; + const Core::Sleep * sleep; +}; + +/// @brief +/// Writes data to EEPROM using Write Scratchpad, Read Scratchpad, +/// and Copy Scratchpad commands. +/// @param device Device to write. +/// @param[in] targetAddress EEPROM memory address to start writing at. +/// @param[in] data Data to write to EEPROM. +MaximInterfaceDevices_EXPORT Core::error_code +writeMemory(DS2431 & device, DS2431::Address targetAddress, + DS2431::Scratchpad::const_span data); + +inline Core::error_code make_error_code(DS2431::ErrorValue e) { + return Core::error_code(e, DS2431::errorCategory()); +} + +} // namespace MaximInterfaceDevices + +#endif