DeepCover Embedded Security in IoT: Public-key Secured Data Paths

Dependencies:   MaximInterface

The MAXREFDES155# is an internet-of-things (IoT) embedded-security reference design, built to authenticate and control a sensing node using elliptic-curve-based public-key cryptography with control and notification from a web server.

The hardware includes an ARM® mbed™ shield and attached sensor endpoint. The shield contains a DS2476 DeepCover® ECDSA/SHA-2 coprocessor, Wifi communication, LCD push-button controls, and status LEDs. The sensor endpoint is attached to the shield using a 300mm cable and contains a DS28C36 DeepCover ECDSA/SHA-2 authenticator, IR-thermal sensor, and aiming laser for the IR sensor. The MAXREFDES155# is equipped with a standard Arduino® form-factor shield connector for immediate testing using an mbed board such as the MAX32600MBED#. The combination of these two devices represent an IoT device. Communication to the web server is accomplished with the shield Wifi circuitry. Communication from the shield to the attached sensor module is accomplished over I2C . The sensor module represents an IoT endpoint that generates small data with a requirement for message authenticity/integrity and secure on/off operational control.

The design is hierarchical with each mbed platform and shield communicating data from the sensor node to a web server that maintains a centralized log and dispatches notifications as necessary. The simplicity of this design enables rapid integration into any star-topology IoT network to provide security with the low overhead and cost provided by the ECDSA-P256 asymmetric-key and SHA-256 symmetric-key algorithms.

More information about the MAXREFDES155# is available on the Maxim Integrated website.

xternal/rapidjson/encodedstream.h

Committer:
IanBenzMaxim
Date:
2019-10-04
Revision:
17:5926077e5345
Parent:
16:a004191a79ab

File content as of revision 17:5926077e5345:

// Tencent is pleased to support the open source community by making RapidJSON available.
// 
// Copyright (C) 2015 THL A29 Limited, a Tencent company, and Milo Yip. All rights reserved.
//
// Licensed under the MIT License (the "License"); you may not use this file except
// in compliance with the License. You may obtain a copy of the License at
//
// http://opensource.org/licenses/MIT
//
// Unless required by applicable law or agreed to in writing, software distributed 
// under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR 
// CONDITIONS OF ANY KIND, either express or implied. See the License for the 
// specific language governing permissions and limitations under the License.

#ifndef RAPIDJSON_ENCODEDSTREAM_H_
#define RAPIDJSON_ENCODEDSTREAM_H_

#include "stream.h"
#include "memorystream.h"

#ifdef __GNUC__
RAPIDJSON_DIAG_PUSH
RAPIDJSON_DIAG_OFF(effc++)
#endif

#ifdef __clang__
RAPIDJSON_DIAG_PUSH
RAPIDJSON_DIAG_OFF(padded)
#endif

RAPIDJSON_NAMESPACE_BEGIN

//! Input byte stream wrapper with a statically bound encoding.
/*!
    \tparam Encoding The interpretation of encoding of the stream. Either UTF8, UTF16LE, UTF16BE, UTF32LE, UTF32BE.
    \tparam InputByteStream Type of input byte stream. For example, FileReadStream.
*/
template <typename Encoding, typename InputByteStream>
class EncodedInputStream {
    RAPIDJSON_STATIC_ASSERT(sizeof(typename InputByteStream::Ch) == 1);
public:
    typedef typename Encoding::Ch Ch;

    EncodedInputStream(InputByteStream& is) : is_(is) { 
        current_ = Encoding::TakeBOM(is_);
    }

    Ch Peek() const { return current_; }
    Ch Take() { Ch c = current_; current_ = Encoding::Take(is_); return c; }
    size_t Tell() const { return is_.Tell(); }

    // Not implemented
    void Put(Ch) { RAPIDJSON_ASSERT(false); }
    void Flush() { RAPIDJSON_ASSERT(false); } 
    Ch* PutBegin() { RAPIDJSON_ASSERT(false); return 0; }
    size_t PutEnd(Ch*) { RAPIDJSON_ASSERT(false); return 0; }

private:
    EncodedInputStream(const EncodedInputStream&);
    EncodedInputStream& operator=(const EncodedInputStream&);

    InputByteStream& is_;
    Ch current_;
};

//! Specialized for UTF8 MemoryStream.
template <>
class EncodedInputStream<UTF8<>, MemoryStream> {
public:
    typedef UTF8<>::Ch Ch;

    EncodedInputStream(MemoryStream& is) : is_(is) {
        if (static_cast<unsigned char>(is_.Peek()) == 0xEFu) is_.Take();
        if (static_cast<unsigned char>(is_.Peek()) == 0xBBu) is_.Take();
        if (static_cast<unsigned char>(is_.Peek()) == 0xBFu) is_.Take();
    }
    Ch Peek() const { return is_.Peek(); }
    Ch Take() { return is_.Take(); }
    size_t Tell() const { return is_.Tell(); }

    // Not implemented
    void Put(Ch) {}
    void Flush() {} 
    Ch* PutBegin() { return 0; }
    size_t PutEnd(Ch*) { return 0; }

    MemoryStream& is_;

private:
    EncodedInputStream(const EncodedInputStream&);
    EncodedInputStream& operator=(const EncodedInputStream&);
};

//! Output byte stream wrapper with statically bound encoding.
/*!
    \tparam Encoding The interpretation of encoding of the stream. Either UTF8, UTF16LE, UTF16BE, UTF32LE, UTF32BE.
    \tparam OutputByteStream Type of input byte stream. For example, FileWriteStream.
*/
template <typename Encoding, typename OutputByteStream>
class EncodedOutputStream {
    RAPIDJSON_STATIC_ASSERT(sizeof(typename OutputByteStream::Ch) == 1);
public:
    typedef typename Encoding::Ch Ch;

    EncodedOutputStream(OutputByteStream& os, bool putBOM = true) : os_(os) { 
        if (putBOM)
            Encoding::PutBOM(os_);
    }

    void Put(Ch c) { Encoding::Put(os_, c);  }
    void Flush() { os_.Flush(); }

    // Not implemented
    Ch Peek() const { RAPIDJSON_ASSERT(false); return 0;}
    Ch Take() { RAPIDJSON_ASSERT(false); return 0;}
    size_t Tell() const { RAPIDJSON_ASSERT(false);  return 0; }
    Ch* PutBegin() { RAPIDJSON_ASSERT(false); return 0; }
    size_t PutEnd(Ch*) { RAPIDJSON_ASSERT(false); return 0; }

private:
    EncodedOutputStream(const EncodedOutputStream&);
    EncodedOutputStream& operator=(const EncodedOutputStream&);

    OutputByteStream& os_;
};

#define RAPIDJSON_ENCODINGS_FUNC(x) UTF8<Ch>::x, UTF16LE<Ch>::x, UTF16BE<Ch>::x, UTF32LE<Ch>::x, UTF32BE<Ch>::x

//! Input stream wrapper with dynamically bound encoding and automatic encoding detection.
/*!
    \tparam CharType Type of character for reading.
    \tparam InputByteStream type of input byte stream to be wrapped.
*/
template <typename CharType, typename InputByteStream>
class AutoUTFInputStream {
    RAPIDJSON_STATIC_ASSERT(sizeof(typename InputByteStream::Ch) == 1);
public:
    typedef CharType Ch;

    //! Constructor.
    /*!
        \param is input stream to be wrapped.
        \param type UTF encoding type if it is not detected from the stream.
    */
    AutoUTFInputStream(InputByteStream& is, UTFType type = kUTF8) : is_(&is), type_(type), hasBOM_(false) {
        RAPIDJSON_ASSERT(type >= kUTF8 && type <= kUTF32BE);        
        DetectType();
        static const TakeFunc f[] = { RAPIDJSON_ENCODINGS_FUNC(Take) };
        takeFunc_ = f[type_];
        current_ = takeFunc_(*is_);
    }

    UTFType GetType() const { return type_; }
    bool HasBOM() const { return hasBOM_; }

    Ch Peek() const { return current_; }
    Ch Take() { Ch c = current_; current_ = takeFunc_(*is_); return c; }
    size_t Tell() const { return is_->Tell(); }

    // Not implemented
    void Put(Ch) { RAPIDJSON_ASSERT(false); }
    void Flush() { RAPIDJSON_ASSERT(false); } 
    Ch* PutBegin() { RAPIDJSON_ASSERT(false); return 0; }
    size_t PutEnd(Ch*) { RAPIDJSON_ASSERT(false); return 0; }

private:
    AutoUTFInputStream(const AutoUTFInputStream&);
    AutoUTFInputStream& operator=(const AutoUTFInputStream&);

    // Detect encoding type with BOM or RFC 4627
    void DetectType() {
        // BOM (Byte Order Mark):
        // 00 00 FE FF  UTF-32BE
        // FF FE 00 00  UTF-32LE
        // FE FF        UTF-16BE
        // FF FE        UTF-16LE
        // EF BB BF     UTF-8

        const unsigned char* c = reinterpret_cast<const unsigned char *>(is_->Peek4());
        if (!c)
            return;

        unsigned bom = static_cast<unsigned>(c[0] | (c[1] << 8) | (c[2] << 16) | (c[3] << 24));
        hasBOM_ = false;
        if (bom == 0xFFFE0000)                  { type_ = kUTF32BE; hasBOM_ = true; is_->Take(); is_->Take(); is_->Take(); is_->Take(); }
        else if (bom == 0x0000FEFF)             { type_ = kUTF32LE; hasBOM_ = true; is_->Take(); is_->Take(); is_->Take(); is_->Take(); }
        else if ((bom & 0xFFFF) == 0xFFFE)      { type_ = kUTF16BE; hasBOM_ = true; is_->Take(); is_->Take();                           }
        else if ((bom & 0xFFFF) == 0xFEFF)      { type_ = kUTF16LE; hasBOM_ = true; is_->Take(); is_->Take();                           }
        else if ((bom & 0xFFFFFF) == 0xBFBBEF)  { type_ = kUTF8;    hasBOM_ = true; is_->Take(); is_->Take(); is_->Take();              }

        // RFC 4627: Section 3
        // "Since the first two characters of a JSON text will always be ASCII
        // characters [RFC0020], it is possible to determine whether an octet
        // stream is UTF-8, UTF-16 (BE or LE), or UTF-32 (BE or LE) by looking
        // at the pattern of nulls in the first four octets."
        // 00 00 00 xx  UTF-32BE
        // 00 xx 00 xx  UTF-16BE
        // xx 00 00 00  UTF-32LE
        // xx 00 xx 00  UTF-16LE
        // xx xx xx xx  UTF-8

        if (!hasBOM_) {
            unsigned pattern = (c[0] ? 1 : 0) | (c[1] ? 2 : 0) | (c[2] ? 4 : 0) | (c[3] ? 8 : 0);
            switch (pattern) {
            case 0x08: type_ = kUTF32BE; break;
            case 0x0A: type_ = kUTF16BE; break;
            case 0x01: type_ = kUTF32LE; break;
            case 0x05: type_ = kUTF16LE; break;
            case 0x0F: type_ = kUTF8;    break;
            default: break; // Use type defined by user.
            }
        }

        // Runtime check whether the size of character type is sufficient. It only perform checks with assertion.
        if (type_ == kUTF16LE || type_ == kUTF16BE) RAPIDJSON_ASSERT(sizeof(Ch) >= 2);
        if (type_ == kUTF32LE || type_ == kUTF32BE) RAPIDJSON_ASSERT(sizeof(Ch) >= 4);
    }

    typedef Ch (*TakeFunc)(InputByteStream& is);
    InputByteStream* is_;
    UTFType type_;
    Ch current_;
    TakeFunc takeFunc_;
    bool hasBOM_;
};

//! Output stream wrapper with dynamically bound encoding and automatic encoding detection.
/*!
    \tparam CharType Type of character for writing.
    \tparam OutputByteStream type of output byte stream to be wrapped.
*/
template <typename CharType, typename OutputByteStream>
class AutoUTFOutputStream {
    RAPIDJSON_STATIC_ASSERT(sizeof(typename OutputByteStream::Ch) == 1);
public:
    typedef CharType Ch;

    //! Constructor.
    /*!
        \param os output stream to be wrapped.
        \param type UTF encoding type.
        \param putBOM Whether to write BOM at the beginning of the stream.
    */
    AutoUTFOutputStream(OutputByteStream& os, UTFType type, bool putBOM) : os_(&os), type_(type) {
        RAPIDJSON_ASSERT(type >= kUTF8 && type <= kUTF32BE);

        // Runtime check whether the size of character type is sufficient. It only perform checks with assertion.
        if (type_ == kUTF16LE || type_ == kUTF16BE) RAPIDJSON_ASSERT(sizeof(Ch) >= 2);
        if (type_ == kUTF32LE || type_ == kUTF32BE) RAPIDJSON_ASSERT(sizeof(Ch) >= 4);

        static const PutFunc f[] = { RAPIDJSON_ENCODINGS_FUNC(Put) };
        putFunc_ = f[type_];

        if (putBOM)
            PutBOM();
    }

    UTFType GetType() const { return type_; }

    void Put(Ch c) { putFunc_(*os_, c); }
    void Flush() { os_->Flush(); } 

    // Not implemented
    Ch Peek() const { RAPIDJSON_ASSERT(false); return 0;}
    Ch Take() { RAPIDJSON_ASSERT(false); return 0;}
    size_t Tell() const { RAPIDJSON_ASSERT(false); return 0; }
    Ch* PutBegin() { RAPIDJSON_ASSERT(false); return 0; }
    size_t PutEnd(Ch*) { RAPIDJSON_ASSERT(false); return 0; }

private:
    AutoUTFOutputStream(const AutoUTFOutputStream&);
    AutoUTFOutputStream& operator=(const AutoUTFOutputStream&);

    void PutBOM() { 
        typedef void (*PutBOMFunc)(OutputByteStream&);
        static const PutBOMFunc f[] = { RAPIDJSON_ENCODINGS_FUNC(PutBOM) };
        f[type_](*os_);
    }

    typedef void (*PutFunc)(OutputByteStream&, Ch);

    OutputByteStream* os_;
    UTFType type_;
    PutFunc putFunc_;
};

#undef RAPIDJSON_ENCODINGS_FUNC

RAPIDJSON_NAMESPACE_END

#ifdef __clang__
RAPIDJSON_DIAG_POP
#endif

#ifdef __GNUC__
RAPIDJSON_DIAG_POP
#endif

#endif // RAPIDJSON_FILESTREAM_H_