Revision 0:db8738fc21e8, committed 2013-10-06

Comitter:

Kojto

Date:

Sun Oct 06 16:29:29 2013 +0000

Child:

1:c3a27e2adf93

Commit message:

initial version

Changed in this revision

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/NVIC_set_all_priorities.lib	Sun Oct 06 16:29:29 2013 +0000
@@ -0,0 +1,1 @@
+http://mbed.org/users/frankvnk/code/NVIC_set_all_priorities/#676bbfffe9f6

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/cc3000_hostdriver_mbedsocket.lib	Sun Oct 06 16:29:29 2013 +0000
@@ -0,0 +1,1 @@
+http://mbed.org/users/Kojto/code/cc3000_hostdriver_mbedsocket/#e62d7252401e

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/init.cpp	Sun Oct 06 16:29:29 2013 +0000
@@ -0,0 +1,70 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#include "main.h"
+#include "mbed.h"
+
+#if (MY_BOARD == WIGO)
+
+#include "NVIC_set_all_priorities.h"
+
+/**
+ *  \brief Wi-Go initialization
+ *  \param none
+ *  \return none
+ */
+void init() {
+    DigitalOut PWR_EN1(PTB2);
+    DigitalOut PWR_EN2(PTB3);
+
+    // Wi-Go set current to 500mA since we're turning on the Wi-Fi
+    PWR_EN1 = 0;
+    PWR_EN2 = 1;
+
+    NVIC_set_all_irq_priorities(3);
+    NVIC_SetPriority(SPI0_IRQn, 0x0);     // Wi-Fi SPI interrupt must be higher priority than SysTick
+    NVIC_SetPriority(PORTA_IRQn, 0x1);
+    NVIC_SetPriority(SysTick_IRQn, 0x2);  // SysTick set to lower priority than Wi-Fi SPI bus interrupt
+    PORTA->PCR[16] |=PORT_PCR_ISF_MASK;
+    PORTA->ISFR |= (1 << 16);
+}
+
+#elif (MY_BOARD == WIFI_DIPCORTEX)
+
+/**
+ *  \brief Wifi DipCortex initialization
+ *  \param none
+ *  \return none
+ */
+void init() {
+    NVIC_SetPriority(SSP1_IRQn, 0x0);
+    NVIC_SetPriority(PIN_INT0_IRQn, 0x1);
+
+    // SysTick set to lower priority than Wi-Fi SPI bus interrupt
+    NVIC_SetPriority(SysTick_IRQn, 0x2);
+}
+
+#else
+
+/**
+ *  \brief Place here init routine for your board
+ *  \param none
+ *  \return none
+ */
+void init() {
+
+}
+
+#endif

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp	Sun Oct 06 16:29:29 2013 +0000
@@ -0,0 +1,119 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#include "mbed.h"
+#include "cc3000.h"
+#include "main.h"
+
+using namespace mbed_cc3000;
+
+tUserFS user_info;
+
+/* cc3000 module declaration specific for user's board. Check also init() */
+#if (MY_BOARD == WIGO)
+cc3000 wifi(PTA16, PTA13, PTD0, SPI(PTD2, PTD3, PTC5), PORTA_IRQn);
+Serial pc(USBTX, USBRX);
+#elif (MY_BOARD == WIFI_DIPCORTEX)
+cc3000 wifi(p28, p27, p30, SPI(p21, p14, p37), PIN_INT0_IRQn);
+Serial pc(UART_TX, UART_RX);
+#else
+
+#endif
+
+/**
+ *  \brief Print cc3000 information
+ *  \param none
+ *  \return none
+ */
+void print_cc3000_info() {
+    uint8_t myMAC[8];
+
+    printf("MAC address + cc3000 info \r\n");
+    wifi.get_user_file_info((uint8_t *)&user_info, sizeof(user_info));
+    wifi.get_mac_address(myMAC);
+    printf(" MAC address %02x:%02x:%02x:%02x:%02x:%02x \r\n \r\n", myMAC[0], myMAC[1], myMAC[2], myMAC[3], myMAC[4], myMAC[5]);
+
+    printf(" FTC        %i \r\n",user_info.FTC);
+    printf(" PP_version %i.%i \r\n",user_info.PP_version[0], user_info.PP_version[1]);
+    printf(" SERV_PACK  %i.%i \r\n",user_info.SERV_PACK[0], user_info.SERV_PACK[1]);
+    printf(" DRV_VER    %i.%i.%i \r\n",user_info.DRV_VER[0], user_info.DRV_VER[1], user_info.DRV_VER[2]);
+    printf(" FW_VER     %i.%i.%i \r\n",user_info.FW_VER[0], user_info.FW_VER[1], user_info.FW_VER[2]);
+}
+
+/**
+ *  \brief Connect to SSID with a timeout
+ *  \param ssid     Name of SSID
+ *  \param key      Password
+ *  \param sec_mode Security mode
+ *  \return none
+ */
+void connect_to_ssid(char *ssid, char *key, unsigned char sec_mode) {
+    printf("Connecting to SSID: %s. Timeout is 10s.\n",ssid);
+    if (wifi.connect_to_AP((uint8_t *)ssid, (uint8_t *)key, sec_mode) == true) {
+        printf(" Connected\n");
+    } else {
+        printf(" Connection timed-out (error). Please restart.\n");
+        while(1);
+  }
+}
+
+/**
+ *  \brief Connect to SSID without security
+ *  \param ssid Name of SSID
+ *  \return none
+ */
+void connect_to_ssid(char *ssid) {
+    wifi.connect_open((uint8_t *)ssid);
+}
+
+
+/**
+ *  \brief Hello World
+ *  \param  none
+ *  \return int
+ */
+int main() {
+    init(); /* board dependent init */
+    pc.baud(115200);
+
+    wifi.start(0);
+    printf("cc3000 Hello World demo. \r\n");
+    print_cc3000_info();
+
+    printf("Attempting SSID Connection. \r\n");
+    wifi._wlan.ioctl_set_connection_policy(0, 0, 0);
+#ifndef CC3000_TINY_DRIVER
+#ifdef AP_KEY
+    connect_to_ssid(SSID, AP_KEY, AP_SECURITY);
+#else
+    connect_to_ssid(SSID);
+#endif
+#else
+    connect_to_ssid(SSID);
+#endif
+    printf("DHCP request \r\n");
+    while (wifi.is_dhcp_configured() == false) {
+         wait_ms(500);
+         printf("  Waiting for dhcp to be set. \r\n");
+    }
+    
+    tNetappIpconfigRetArgs ipinfo2;
+    wifi.get_ip_config(&ipinfo2); // data is returned in the ipinfo2 structure
+    printf("DHCP assigned IP Address = %d.%d.%d.%d \r\n", ipinfo2.aucIP[3], ipinfo2.aucIP[2], ipinfo2.aucIP[1], ipinfo2.aucIP[0]);
+    printf("\r\ncc3000 connected to the Internet. Demo completed. \r\n\r\n");
+
+    wifi.disconnect();
+}
+

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/main.h	Sun Oct 06 16:29:29 2013 +0000
@@ -0,0 +1,41 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MAIN_H
+#define MAIN_H
+
+#define WIGO           1
+#define WIFI_DIPCORTEX 2
+#define UNDEFINED      3
+
+#define MY_BOARD WIGO
+
+// use this defines in AP_SECURITY
+#define NONE 0
+#define WEP  1
+#define WPA  2
+#define WPA2 3
+
+// use smart config
+#define USE_SMART_CONFIG 0
+
+ // Default SSID Settings
+#define AP_KEY       "test"
+#define AP_SECURITY  WPA2            // WPA2 must be enabled for use with iPhone or Android phone hotspot!
+#define SSID         "test"
+
+void init();
+
+#endif

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed.bld	Sun Oct 06 16:29:29 2013 +0000
@@ -0,0 +1,1 @@
+http://mbed.org/users/mbed_official/code/mbed/builds/a9913a65894f
\ No newline at end of file