File content as of revision 9:eee503060d69:

#include "stdio.h"
#include "SPI_TFT_ILI9341.h"
#include "string"
#include "Arial12x12.h"
#include "Arial24x23.h"
#include "Arial28x28.h"
#include "font_big.h"

// example to test the TFT Display from Mikroelectronika








// the display has a backlight switch on board
//DigitalOut LCD_LED(PTA4);   // may not be needed on mikroelectronika board
//DigitalOut pwr(PTD7); // ditto

// the TFT is connected to SPI pin 5-7
//SPI_TFT_ILI9341 TFT(p5, p6, p7, p8, p9, p10,"TFT"); // mosi, miso, sclk, cs, reset, dc for lpc1768
SPI_TFT_ILI9341 TFT(PTD6, PTD7, PTD5, PTD2, PTD4, PTA13,"TFT"); // mosi, miso, sclk, cs, reset, dc for frdmkl25z
//NB better combination to use a coherent 2x4 block for lcd
//   SPI_TFT_ILI9341 TFT(PTD2, PTD3, PTD1, PTA16, PTA17, PTC16,"TFT"); // mosi, miso, sclk, cs, reset, dc for frdmkl25z
//   DigitalOut LCD_LED(PTC17);
int touching=0;

// Subroutine to read the x location of the touch point
// need to set x+ to 3V and ground x- then read analogue voltage on ym
//nb need to add a check for actual touch as opposed to random crap




void drawbuttons()
{
  TFT.fillrect(0,0,50,50,Red);
    TFT.fillrect(0,50,50,100,Green);
    TFT.fillrect(0,100,50,150,Blue);
    TFT.fillrect(0,150,50,200,White);
    TFT.fillrect(0,200,50,250,Black);

    TFT.rect(0,0,50,50,White);
    TFT.rect(0,50,50,100,White);
    TFT.rect(0,100,50,150,White);
    TFT.rect(0,150,50,200,White);
    TFT.rect(0,200,50,250,White);
}