Diff: targets/hal/TARGET_NXP/TARGET_LPC13XX/serial_api.c

Revision:

227:7bd0639b8911

Parent:

140:ca60b7a31055

Child:

339:40bd4701f3e2

--- a/targets/hal/TARGET_NXP/TARGET_LPC13XX/serial_api.c	Wed Jun 11 09:45:09 2014 +0100
+++ b/targets/hal/TARGET_NXP/TARGET_LPC13XX/serial_api.c	Wed Jun 11 16:00:09 2014 +0100
@@ -14,6 +14,7 @@
  * limitations under the License.
  */
 // math.h required for floating point operations for baud rate calculation
+#include "mbed_assert.h"
 #include <math.h>
 #include <string.h>
 #include <stdlib.h>
@@ -21,7 +22,6 @@
 #include "serial_api.h"
 #include "cmsis.h"
 #include "pinmap.h"
-#include "error.h"
 
 /******************************************************************************
  * INITIALIZATION
@@ -55,9 +55,7 @@
     UARTName uart_tx = (UARTName)pinmap_peripheral(tx, PinMap_UART_TX);
     UARTName uart_rx = (UARTName)pinmap_peripheral(rx, PinMap_UART_RX);
     UARTName uart = (UARTName)pinmap_merge(uart_tx, uart_rx);
-    if ((int)uart == NC) {
-        error("Serial pinout mapping failed");
-    }
+    MBED_ASSERT((int)uart != NC);
     
     obj->uart = (LPC_USART_Type *)uart;
     LPC_SYSCON->SYSAHBCLKCTRL |= (1<<12);
@@ -186,16 +184,12 @@
 }
 
 void serial_format(serial_t *obj, int data_bits, SerialParity parity, int stop_bits) {
-    // 0: 1 stop bits, 1: 2 stop bits
-    if (stop_bits != 1 && stop_bits != 2) {
-        error("Invalid stop bits specified");
-    }
+    MBED_ASSERT((stop_bits == 1) || (stop_bits == 2)); // 0: 1 stop bits, 1: 2 stop bits
+    MBED_ASSERT((data_bits > 4) && (data_bits < 9)); // 0: 5 data bits ... 3: 8 data bits
+    MBED_ASSERT((parity == ParityNone) || (parity == ParityOdd) || (parity == ParityEven) ||
+           (parity == ParityForced1) || (parity == ParityForced0));
+
     stop_bits -= 1;
-    
-    // 0: 5 data bits ... 3: 8 data bits
-    if (data_bits < 5 || data_bits > 8) {
-        error("Invalid number of bits (%d) in serial format, should be 5..8", data_bits);
-    }
     data_bits -= 5;
 
     int parity_enable, parity_select;
@@ -206,8 +200,7 @@
         case ParityForced1: parity_enable = 1; parity_select = 2; break;
         case ParityForced0: parity_enable = 1; parity_select = 3; break;
         default:
-            error("Invalid serial parity setting");
-            return;
+            break;
     }
     
     obj->uart->LCR = data_bits            << 0