Flotsam
Adafruit GSM library
Revision 0:13b14c71d29e, committed 2015-12-05
- Comitter:
- ptcrews
- Date:
- Sat Dec 05 07:22:00 2015 +0000
- Commit message:
- Adafruit GSM library
Changed in this revision
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/Adafruit_FONA.cpp Sat Dec 05 07:22:00 2015 +0000
@@ -0,0 +1,1435 @@
+/***************************************************
+ This is a library for our Adafruit FONA Cellular Module
+
+ Designed specifically to work with the Adafruit FONA
+ ----> http://www.adafruit.com/products/1946
+ ----> http://www.adafruit.com/products/1963
+
+ These displays use TTL Serial to communicate, 2 pins are required to
+ interface
+ Adafruit invests time and resources providing this open source code,
+ please support Adafruit and open-source hardware by purchasing
+ products from Adafruit!
+
+ Written by Limor Fried/Ladyada for Adafruit Industries.
+ BSD license, all text above must be included in any redistribution
+ ****************************************************/
+
+ /*
+ * Modified by Marc PLOUHINEC 27/06/2015 for use in mbed
+ */
+#include <algorithm>
+#include "Adafruit_FONA.h"
+
+#define HIGH 1
+#define LOW 0
+
+bool Adafruit_FONA::begin(int baudrate) {
+ mySerial.baud(baudrate);
+ mySerial.attach(this, &Adafruit_FONA::onSerialDataReceived, Serial::RxIrq);
+
+ _rstpin = HIGH;
+ wait_ms(10);
+ _rstpin = LOW;
+ wait_ms(100);
+ _rstpin = HIGH;
+
+ // give 3 seconds to reboot
+ wait_ms(3000);
+
+ while (readable()) getc();
+
+ sendCheckReply("AT", "OK");
+ wait_ms(100);
+ sendCheckReply("AT", "OK");
+ wait_ms(100);
+ sendCheckReply("AT", "OK");
+ wait_ms(100);
+
+ // turn off Echo!
+ sendCheckReply("ATE0", "OK");
+ wait_ms(100);
+
+ if (! sendCheckReply("ATE0", "OK")) {
+ return false;
+ }
+
+ return true;
+}
+
+void Adafruit_FONA::setEventListener(EventListener *eventListener) {
+ this->eventListener = eventListener;
+}
+
+/********* Stream ********************************************/
+
+int Adafruit_FONA::_putc(int value) {
+ return mySerial.putc(value);
+}
+
+int Adafruit_FONA::_getc() {
+ __disable_irq(); // Start Critical Section - don't interrupt while changing global buffer variables
+
+ // Wait for data if the buffer is empty
+ if (isRxBufferEmpty()) {
+ __enable_irq(); // End Critical Section - need to allow rx interrupt to get new characters for buffer
+
+ while(isRxBufferEmpty());
+
+ __disable_irq(); // Start Critical Section - don't interrupt while changing global buffer variables
+ }
+
+ int data = rxBuffer[rxBufferOutIndex];
+ incrementRxBufferOutIndex();
+
+ __enable_irq(); // End Critical Section
+
+ return data;
+}
+
+int Adafruit_FONA::readable() {
+ return !isRxBufferEmpty();
+}
+
+void Adafruit_FONA::onSerialDataReceived() {
+ while (mySerial.readable() && !isRxBufferFull()) {
+ int data = mySerial.getc();
+ rxBuffer[rxBufferInIndex] = data;
+
+ //
+ // Analyze the received data in order to detect events like RING or NO CARRIER
+ //
+
+ // Copy the data in the current line
+ if (currentReceivedLineSize < RX_BUFFER_SIZE && data != '\r' && data != '\n') {
+ currentReceivedLine[currentReceivedLineSize] = (char) data;
+ currentReceivedLineSize++;
+ }
+
+ // Check if the line is complete
+ if (data == '\n') {
+ currentReceivedLine[currentReceivedLineSize] = 0;
+
+ if (eventListener != NULL) {
+ // Check if we have a special event
+ if (strcmp(currentReceivedLine, "RING") == 0) {
+ eventListener->onRing();
+ } else if (strcmp(currentReceivedLine, "NO CARRIER") == 0) {
+ eventListener->onNoCarrier();
+ }
+ }
+
+ currentReceivedLineSize = 0;
+ }
+
+ incrementRxBufferInIndex();
+ }
+}
+
+/********* Real Time Clock ********************************************/
+
+bool Adafruit_FONA::enableRTC(uint8_t i) {
+ if (! sendCheckReply("AT+CLTS=", i, "OK"))
+ return false;
+ return sendCheckReply("AT&W", "OK");
+}
+
+/********* BATTERY & ADC ********************************************/
+
+/* returns value in mV (uint16_t) */
+bool Adafruit_FONA::getBattVoltage(uint16_t *v) {
+ return sendParseReply("AT+CBC", "+CBC: ", v, ',', 2);
+}
+
+/* returns the percentage charge of battery as reported by sim800 */
+bool Adafruit_FONA::getBattPercent(uint16_t *p) {
+ return sendParseReply("AT+CBC", "+CBC: ", p, ',', 1);
+}
+
+bool Adafruit_FONA::getADCVoltage(uint16_t *v) {
+ return sendParseReply("AT+CADC?", "+CADC: 1,", v);
+}
+
+/********* SIM ***********************************************************/
+
+bool Adafruit_FONA::unlockSIM(char *pin)
+{
+ char sendbuff[14] = "AT+CPIN=";
+ sendbuff[8] = pin[0];
+ sendbuff[9] = pin[1];
+ sendbuff[10] = pin[2];
+ sendbuff[11] = pin[3];
+ sendbuff[12] = NULL;
+
+ return sendCheckReply(sendbuff, "OK");
+}
+
+uint8_t Adafruit_FONA::getSIMCCID(char *ccid) {
+ getReply("AT+CCID");
+ // up to 20 chars
+ strncpy(ccid, replybuffer, 20);
+ ccid[20] = 0;
+
+ readline(); // eat 'OK'
+
+ return strlen(ccid);
+}
+
+/********* IMEI **********************************************************/
+
+uint8_t Adafruit_FONA::getIMEI(char *imei) {
+ getReply("AT+GSN");
+
+ // up to 15 chars
+ strncpy(imei, replybuffer, 15);
+ imei[15] = 0;
+
+ readline(); // eat 'OK'
+
+ return strlen(imei);
+}
+
+/********* NETWORK *******************************************************/
+
+uint8_t Adafruit_FONA::getNetworkStatus(void) {
+ uint16_t status;
+
+ if (! sendParseReply("AT+CREG?", "+CREG: ", &status, ',', 1)) return 0;
+
+ return status;
+}
+
+
+uint8_t Adafruit_FONA::getRSSI(void) {
+ uint16_t reply;
+
+ if (! sendParseReply("AT+CSQ", "+CSQ: ", &reply) ) return 0;
+
+ return reply;
+}
+
+/********* AUDIO *******************************************************/
+
+bool Adafruit_FONA::setAudio(uint8_t a) {
+ // 0 is headset, 1 is external audio
+ if (a > 1) return false;
+
+ return sendCheckReply("AT+CHFA=", a, "OK");
+}
+
+uint8_t Adafruit_FONA::getVolume(void) {
+ uint16_t reply;
+
+ if (! sendParseReply("AT+CLVL?", "+CLVL: ", &reply) ) return 0;
+
+ return reply;
+}
+
+bool Adafruit_FONA::setVolume(uint8_t i) {
+ return sendCheckReply("AT+CLVL=", i, "OK");
+}
+
+
+bool Adafruit_FONA::playDTMF(char dtmf) {
+ char str[4];
+ str[0] = '\"';
+ str[1] = dtmf;
+ str[2] = '\"';
+ str[3] = 0;
+ return sendCheckReply("AT+CLDTMF=3,", str, "OK");
+}
+
+bool Adafruit_FONA::playToolkitTone(uint8_t t, uint16_t len) {
+ return sendCheckReply("AT+STTONE=1,", t, len, "OK");
+}
+
+bool Adafruit_FONA::setMicVolume(uint8_t a, uint8_t level) {
+ // 0 is headset, 1 is external audio
+ if (a > 1) return false;
+
+ return sendCheckReply("AT+CMIC=", a, level, "OK");
+}
+
+/********* FM RADIO *******************************************************/
+
+
+bool Adafruit_FONA::FMradio(bool onoff, uint8_t a) {
+ if (! onoff) {
+ return sendCheckReply("AT+FMCLOSE", "OK");
+ }
+
+ // 0 is headset, 1 is external audio
+ if (a > 1) return false;
+
+ return sendCheckReply("AT+FMOPEN=", a, "OK");
+}
+
+bool Adafruit_FONA::tuneFMradio(uint16_t station) {
+ // Fail if FM station is outside allowed range.
+ if ((station < 870) || (station > 1090))
+ return false;
+
+ return sendCheckReply("AT+FMFREQ=", station, "OK");
+}
+
+bool Adafruit_FONA::setFMVolume(uint8_t i) {
+ // Fail if volume is outside allowed range (0-6).
+ if (i > 6) {
+ return false;
+ }
+ // Send FM volume command and verify response.
+ return sendCheckReply("AT+FMVOLUME=", i, "OK");
+}
+
+int8_t Adafruit_FONA::getFMVolume() {
+ uint16_t level;
+
+ if (! sendParseReply("AT+FMVOLUME?", "+FMVOLUME: ", &level) ) return 0;
+
+ return level;
+}
+
+int8_t Adafruit_FONA::getFMSignalLevel(uint16_t station) {
+ // Fail if FM station is outside allowed range.
+ if ((station < 875) || (station > 1080)) {
+ return -1;
+ }
+
+ // Send FM signal level query command.
+ // Note, need to explicitly send timeout so right overload is chosen.
+ getReply("AT+FMSIGNAL=", station, FONA_DEFAULT_TIMEOUT_MS);
+ // Check response starts with expected value.
+ char *p = strstr(replybuffer, "+FMSIGNAL: ");
+ if (p == 0) return -1;
+ p+=11;
+ // Find second colon to get start of signal quality.
+ p = strchr(p, ':');
+ if (p == 0) return -1;
+ p+=1;
+ // Parse signal quality.
+ int8_t level = atoi(p);
+ readline(); // eat the "OK"
+ return level;
+}
+
+/********* PWM/BUZZER **************************************************/
+
+bool Adafruit_FONA::setPWM(uint16_t period, uint8_t duty) {
+ if (period > 2000) return false;
+ if (duty > 100) return false;
+
+ return sendCheckReply("AT+SPWM=0,", period, duty, "OK");
+}
+
+/********* CALL PHONES **************************************************/
+bool Adafruit_FONA::callPhone(char *number) {
+ char sendbuff[35] = "ATD";
+ strncpy(sendbuff+3, number, min((int)30, (int)strlen(number)));
+ uint8_t x = strlen(sendbuff);
+ sendbuff[x] = ';';
+ sendbuff[x+1] = 0;
+
+ return sendCheckReply(sendbuff, "OK");
+}
+
+bool Adafruit_FONA::hangUp(void) {
+ return sendCheckReply("ATH0", "OK");
+}
+
+bool Adafruit_FONA::pickUp(void) {
+ return sendCheckReply("ATA", "OK");
+}
+
+void Adafruit_FONA::onIncomingCall() {
+#ifdef ADAFRUIT_FONA_DEBUG
+ printf("> Incoming call...\r\n");
+#endif
+ _incomingCall = true;
+}
+
+bool Adafruit_FONA::callerIdNotification(bool enable) {
+ if(enable){
+ _ringIndicatorInterruptIn.fall(this, &Adafruit_FONA::onIncomingCall);
+ return sendCheckReply("AT+CLIP=1", "OK");
+ }
+
+ _ringIndicatorInterruptIn.fall(NULL);
+ return sendCheckReply("AT+CLIP=0", "OK");
+}
+
+bool Adafruit_FONA::incomingCallNumber(char* phonenum) {
+ //+CLIP: "<incoming phone number>",145,"",0,"",0
+ if(!_incomingCall)
+ return false;
+
+ readline();
+ while(!strcmp(replybuffer, "RING") == 0) {
+ flushInput();
+ readline();
+ }
+
+ readline(); //reads incoming phone number line
+
+ parseReply("+CLIP: \"", phonenum, '"');
+
+#ifdef ADAFRUIT_FONA_DEBUG
+ printf("Phone Number: %s\r\n", replybuffer);
+#endif
+
+ _incomingCall = false;
+ return true;
+}
+
+/********* SMS **********************************************************/
+
+uint8_t Adafruit_FONA::getSMSInterrupt(void) {
+ uint16_t reply;
+
+ if (! sendParseReply("AT+CFGRI?", "+CFGRI: ", &reply) ) return 0;
+
+ return reply;
+}
+
+bool Adafruit_FONA::setSMSInterrupt(uint8_t i) {
+ return sendCheckReply("AT+CFGRI=", i, "OK");
+}
+
+int8_t Adafruit_FONA::getNumSMS(void) {
+ uint16_t numsms;
+
+ if (! sendCheckReply("AT+CMGF=1", "OK")) return -1;
+ // ask how many sms are stored
+
+ if (! sendParseReply("AT+CPMS?", "+CPMS: \"SM_P\",", &numsms) ) return -1;
+
+ return numsms;
+}
+
+// Reading SMS's is a bit involved so we don't use helpers that may cause delays or debug
+// printouts!
+bool Adafruit_FONA::readSMS(uint8_t i, char *smsbuff, uint16_t maxlen, uint16_t *readlen) {
+ // text mode
+ if (! sendCheckReply("AT+CMGF=1", "OK")) return false;
+
+ // show all text mode parameters
+ if (! sendCheckReply("AT+CSDH=1", "OK")) return false;
+
+ // parse out the SMS len
+ uint16_t thesmslen = 0;
+
+ //getReply(F("AT+CMGR="), i, 1000); // do not print debug!
+ mySerial.printf("AT+CMGR=%d\r\n", i);
+ readline(1000); // timeout
+
+ // parse it out...
+ if (! parseReply("+CMGR:", &thesmslen, ',', 11)) {
+ *readlen = 0;
+ return false;
+ }
+
+ readRaw(thesmslen);
+
+ flushInput();
+
+ uint16_t thelen = min(maxlen, (uint16_t)strlen(replybuffer));
+ strncpy(smsbuff, replybuffer, thelen);
+ smsbuff[thelen] = 0; // end the string
+
+#ifdef ADAFRUIT_FONA_DEBUG
+ printf("%s\r\n", replybuffer);
+#endif
+ *readlen = thelen;
+ return true;
+}
+
+// Retrieve the sender of the specified SMS message and copy it as a string to
+// the sender buffer. Up to senderlen characters of the sender will be copied
+// and a null terminator will be added if less than senderlen charactesr are
+// copied to the result. Returns true if a result was successfully retrieved,
+// otherwise false.
+bool Adafruit_FONA::getSMSSender(uint8_t i, char *sender, int senderlen) {
+ // Ensure text mode and all text mode parameters are sent.
+ if (! sendCheckReply("AT+CMGF=1", "OK")) return false;
+ if (! sendCheckReply("AT+CSDH=1", "OK")) return false;
+ // Send command to retrieve SMS message and parse a line of response.
+ mySerial.printf("AT+CMGR=%d\r\n", i);
+ readline(1000);
+ // Parse the second field in the response.
+ bool result = parseReplyQuoted("+CMGR:", sender, senderlen, ',', 1);
+ // Drop any remaining data from the response.
+ flushInput();
+ return result;
+}
+
+bool Adafruit_FONA::sendSMS(char *smsaddr, char *smsmsg) {
+ if (! sendCheckReply("AT+CMGF=1", "OK")) return -1;
+
+ char sendcmd[30] = "AT+CMGS=\"";
+ strncpy(sendcmd+9, smsaddr, 30-9-2); // 9 bytes beginning, 2 bytes for close quote + null
+ sendcmd[strlen(sendcmd)] = '\"';
+
+ if (! sendCheckReply(sendcmd, "> ")) return false;
+#ifdef ADAFRUIT_FONA_DEBUG
+ printf("> %s\r\n", smsmsg);
+#endif
+ mySerial.printf("%s\r\n\r\n", smsmsg);
+ mySerial.putc(0x1A);
+#ifdef ADAFRUIT_FONA_DEBUG
+ printf("^Z\r\n");
+#endif
+ readline(10000); // read the +CMGS reply, wait up to 10 seconds!!!
+ //Serial.print("* "); Serial.println(replybuffer);
+ if (strstr(replybuffer, "+CMGS") == 0) {
+ return false;
+ }
+ readline(1000); // read OK
+ //Serial.print("* "); Serial.println(replybuffer);
+
+ if (strcmp(replybuffer, "OK") != 0) {
+ return false;
+ }
+
+ return true;
+}
+
+
+bool Adafruit_FONA::deleteSMS(uint8_t i) {
+ if (! sendCheckReply("AT+CMGF=1", "OK")) return -1;
+ // read an sms
+ char sendbuff[12] = "AT+CMGD=000";
+ sendbuff[8] = (i / 100) + '0';
+ i %= 100;
+ sendbuff[9] = (i / 10) + '0';
+ i %= 10;
+ sendbuff[10] = i + '0';
+
+ return sendCheckReply(sendbuff, "OK", 2000);
+}
+
+/********* TIME **********************************************************/
+
+bool Adafruit_FONA::enableNetworkTimeSync(bool onoff) {
+ if (onoff) {
+ if (! sendCheckReply("AT+CLTS=1", "OK"))
+ return false;
+ } else {
+ if (! sendCheckReply("AT+CLTS=0", "OK"))
+ return false;
+ }
+
+ flushInput(); // eat any 'Unsolicted Result Code'
+
+ return true;
+}
+
+bool Adafruit_FONA::enableNTPTimeSync(bool onoff, const char* ntpserver) {
+ if (onoff) {
+ if (! sendCheckReply("AT+CNTPCID=1", "OK"))
+ return false;
+
+ mySerial.printf("AT+CNTP=\"");
+ if (ntpserver != 0) {
+ mySerial.printf(ntpserver);
+ } else {
+ mySerial.printf("pool.ntp.org");
+ }
+ mySerial.printf("\",0\r\n");
+ readline(FONA_DEFAULT_TIMEOUT_MS);
+ if (strcmp(replybuffer, "OK") != 0)
+ return false;
+
+ if (! sendCheckReply("AT+CNTP", "OK", 10000))
+ return false;
+
+ uint16_t status;
+ readline(10000);
+ if (! parseReply("+CNTP:", &status))
+ return false;
+ } else {
+ if (! sendCheckReply("AT+CNTPCID=0", "OK"))
+ return false;
+ }
+
+ return true;
+}
+
+bool Adafruit_FONA::getTime(char* buff, uint16_t maxlen) {
+ getReply("AT+CCLK?", (uint16_t) 10000);
+ if (strncmp(replybuffer, "+CCLK: ", 7) != 0)
+ return false;
+
+ char *p = replybuffer+7;
+ uint16_t lentocopy = min((uint16_t)(maxlen-1), (uint16_t)strlen(p));
+ strncpy(buff, p, lentocopy+1);
+ buff[lentocopy] = 0;
+
+ readline(); // eat OK
+
+ return true;
+}
+
+/********* GPS **********************************************************/
+
+
+bool Adafruit_FONA::enableGPS(bool onoff) {
+ uint16_t state;
+
+ // first check if its already on or off
+ if (! sendParseReply("AT+CGPSPWR?", "+CGPSPWR: ", &state) )
+ return false;
+
+ if (onoff && !state) {
+ if (! sendCheckReply("AT+CGPSPWR=1", "OK"))
+ return false;
+ } else if (!onoff && state) {
+ if (! sendCheckReply("AT+CGPSPWR=0", "OK"))
+ return false;
+ }
+ return true;
+}
+
+int8_t Adafruit_FONA::GPSstatus(void) {
+ getReply("AT+CGPSSTATUS?");
+
+ char *p = strstr(replybuffer, "+CGPSSTATUS: Location ");
+ if (p == 0) return -1;
+
+ p+=22;
+
+ readline(); // eat 'OK'
+
+
+ if (p[0] == 'U') return 0;
+ if (p[0] == 'N') return 1;
+ if (p[0] == '2') return 2;
+ if (p[0] == '3') return 3;
+
+ // else
+ return 0;
+}
+
+uint8_t Adafruit_FONA::getGPS(uint8_t arg, char *buffer, uint8_t maxbuff) {
+ int32_t x = arg;
+
+ getReply("AT+CGPSINF=", x);
+
+ char *p = strstr(replybuffer, "CGPSINF: ");
+ if (p == 0){
+ buffer[0] = 0;
+ return 0;
+ }
+ p+=9;
+ uint8_t len = max((uint8_t)(maxbuff-1), (uint8_t)strlen(p));
+ strncpy(buffer, p, len);
+ buffer[len] = 0;
+
+ readline(); // eat 'OK'
+ return len;
+}
+
+bool Adafruit_FONA::getGPS(float *lat, float *lon, float *speed_kph, float *heading, float *altitude) {
+ char gpsbuffer[120];
+
+ // we need at least a 2D fix
+ if (GPSstatus() < 2)
+ return false;
+
+ // grab the mode 2^5 gps csv from the sim808
+ uint8_t res_len = getGPS(32, gpsbuffer, 120);
+
+ // make sure we have a response
+ if (res_len == 0)
+ return false;
+
+ // skip mode
+ char *tok = strtok(gpsbuffer, ",");
+ if (! tok) return false;
+
+ // skip date
+ tok = strtok(NULL, ",");
+ if (! tok) return false;
+
+ // skip fix
+ tok = strtok(NULL, ",");
+ if (! tok) return false;
+
+ // grab the latitude
+ char *latp = strtok(NULL, ",");
+ if (! latp) return false;
+
+ // grab latitude direction
+ char *latdir = strtok(NULL, ",");
+ if (! latdir) return false;
+
+ // grab longitude
+ char *longp = strtok(NULL, ",");
+ if (! longp) return false;
+
+ // grab longitude direction
+ char *longdir = strtok(NULL, ",");
+ if (! longdir) return false;
+
+ double latitude = atof(latp);
+ double longitude = atof(longp);
+
+ // convert latitude from minutes to decimal
+ float degrees = floor(latitude / 100);
+ double minutes = latitude - (100 * degrees);
+ minutes /= 60;
+ degrees += minutes;
+
+ // turn direction into + or -
+ if (latdir[0] == 'S') degrees *= -1;
+
+ *lat = degrees;
+
+ // convert longitude from minutes to decimal
+ degrees = floor(longitude / 100);
+ minutes = longitude - (100 * degrees);
+ minutes /= 60;
+ degrees += minutes;
+
+ // turn direction into + or -
+ if (longdir[0] == 'W') degrees *= -1;
+
+ *lon = degrees;
+
+ // only grab speed if needed
+ if (speed_kph != NULL) {
+
+ // grab the speed in knots
+ char *speedp = strtok(NULL, ",");
+ if (! speedp) return false;
+
+ // convert to kph
+ *speed_kph = atof(speedp) * 1.852;
+
+ }
+
+ // only grab heading if needed
+ if (heading != NULL) {
+
+ // grab the speed in knots
+ char *coursep = strtok(NULL, ",");
+ if (! coursep) return false;
+
+ *heading = atof(coursep);
+
+ }
+
+ // no need to continue
+ if (altitude == NULL)
+ return true;
+
+ // we need at least a 3D fix for altitude
+ if (GPSstatus() < 3)
+ return false;
+
+ // grab the mode 0 gps csv from the sim808
+ res_len = getGPS(0, gpsbuffer, 120);
+
+ // make sure we have a response
+ if (res_len == 0)
+ return false;
+
+ // skip mode
+ tok = strtok(gpsbuffer, ",");
+ if (! tok) return false;
+
+ // skip lat
+ tok = strtok(NULL, ",");
+ if (! tok) return false;
+
+ // skip long
+ tok = strtok(NULL, ",");
+ if (! tok) return false;
+
+ // grab altitude
+ char *altp = strtok(NULL, ",");
+ if (! altp) return false;
+
+ *altitude = atof(altp);
+
+ return true;
+}
+
+bool Adafruit_FONA::enableGPSNMEA(uint8_t i) {
+ char sendbuff[15] = "AT+CGPSOUT=000";
+ sendbuff[11] = (i / 100) + '0';
+ i %= 100;
+ sendbuff[12] = (i / 10) + '0';
+ i %= 10;
+ sendbuff[13] = i + '0';
+
+ return sendCheckReply(sendbuff, "OK", 2000);
+}
+
+
+/********* GPRS **********************************************************/
+
+
+bool Adafruit_FONA::enableGPRS(bool onoff) {
+ if (onoff) {
+ // disconnect all sockets
+ sendCheckReply("AT+CIPSHUT", "SHUT OK", 5000);
+
+ if (! sendCheckReply("AT+CGATT=1", "OK", 10000))
+ return false;
+
+ // set bearer profile! connection type GPRS
+ if (! sendCheckReply("AT+SAPBR=3,1,\"CONTYPE\",\"GPRS\"", "OK", 10000))
+ return false;
+
+ // set bearer profile access point name
+ if (apn) {
+ // Send command AT+SAPBR=3,1,"APN","<apn value>" where <apn value> is the configured APN value.
+ if (! sendCheckReplyQuoted("AT+SAPBR=3,1,\"APN\",", apn, "OK", 10000))
+ return false;
+
+ // set username/password
+ if (apnusername) {
+ // Send command AT+SAPBR=3,1,"USER","<user>" where <user> is the configured APN username.
+ if (! sendCheckReplyQuoted("AT+SAPBR=3,1,\"USER\",", apnusername, "OK", 10000))
+ return false;
+ }
+ if (apnpassword) {
+ // Send command AT+SAPBR=3,1,"PWD","<password>" where <password> is the configured APN password.
+ if (! sendCheckReplyQuoted("AT+SAPBR=3,1,\"PWD\",", apnpassword, "OK", 10000))
+ return false;
+ }
+ }
+
+ // open GPRS context
+ if (! sendCheckReply("AT+SAPBR=1,1", "OK", 10000))
+ return false;
+ } else {
+ // disconnect all sockets
+ if (! sendCheckReply("AT+CIPSHUT", "SHUT OK", 5000))
+ return false;
+
+ // close GPRS context
+ if (! sendCheckReply("AT+SAPBR=0,1", "OK", 10000))
+ return false;
+
+ if (! sendCheckReply("AT+CGATT=0", "OK", 10000))
+ return false;
+ }
+ return true;
+}
+
+uint8_t Adafruit_FONA::GPRSstate(void) {
+ uint16_t state;
+
+ if (! sendParseReply("AT+CGATT?", "+CGATT: ", &state) )
+ return -1;
+
+ return state;
+}
+
+void Adafruit_FONA::setGPRSNetworkSettings(const char* apn, const char* ausername, const char* apassword) {
+ this->apn = (char*) apn;
+ this->apnusername = (char*) ausername;
+ this->apnpassword = (char*) apassword;
+}
+
+bool Adafruit_FONA::getGSMLoc(uint16_t *errorcode, char *buff, uint16_t maxlen) {
+ getReply("AT+CIPGSMLOC=1,1", (uint16_t)10000);
+
+ if (! parseReply("+CIPGSMLOC: ", errorcode))
+ return false;
+
+ char *p = replybuffer+14;
+ uint16_t lentocopy = min((uint16_t)(maxlen-1), (uint16_t)strlen(p));
+ strncpy(buff, p, lentocopy+1);
+
+ readline(); // eat OK
+
+ return true;
+}
+
+bool Adafruit_FONA::getGSMLoc(float *lat, float *lon) {
+ uint16_t returncode;
+ char gpsbuffer[120];
+
+ // make sure we could get a response
+ if (! getGSMLoc(&returncode, gpsbuffer, 120))
+ return false;
+
+ // make sure we have a valid return code
+ if (returncode != 0)
+ return false;
+
+ // tokenize the gps buffer to locate the lat & long
+ char *latp = strtok(gpsbuffer, ",");
+ if (! latp) return false;
+
+ char *longp = strtok(NULL, ",");
+ if (! longp) return false;
+
+ *lat = atof(latp);
+ *lon = atof(longp);
+
+ return true;
+}
+
+/********* TCP FUNCTIONS ************************************/
+
+
+bool Adafruit_FONA::TCPconnect(char *server, uint16_t port) {
+ flushInput();
+
+ // close all old connections
+ if (! sendCheckReply("AT+CIPSHUT", "SHUT OK", 5000) ) return false;
+
+ // single connection at a time
+ if (! sendCheckReply("AT+CIPMUX=0", "OK") ) return false;
+
+ // manually read data
+ if (! sendCheckReply("AT+CIPRXGET=1", "OK") ) return false;
+
+#ifdef ADAFRUIT_FONA_DEBUG
+ printf("AT+CIPSTART=\"TCP\",\"%s\",\"%d\"\r\n", server, port);
+#endif
+
+ mySerial.printf("AT+CIPSTART=\"TCP\",\"%s\",\"%d\"\r\n", server, port);
+
+ if (! expectReply("OK")) return false;
+ if (! expectReply("CONNECT OK")) return false;
+ return true;
+}
+
+bool Adafruit_FONA::TCPclose(void) {
+ return sendCheckReply("AT+CIPCLOSE", "OK");
+}
+
+bool Adafruit_FONA::TCPconnected(void) {
+ if (! sendCheckReply("AT+CIPSTATUS", "OK", 100) ) return false;
+ readline(100);
+#ifdef ADAFRUIT_FONA_DEBUG
+ printf("\t<--- %s\r\n", replybuffer);
+#endif
+ return (strcmp(replybuffer, "STATE: CONNECT OK") == 0);
+}
+
+bool Adafruit_FONA::TCPsend(char *packet, uint8_t len) {
+#ifdef ADAFRUIT_FONA_DEBUG
+ printf("AT+CIPSEND=%d\r\n", len);
+
+ for (uint16_t i=0; i<len; i++) {
+ printf(" 0x%#02x", packet[i]);
+ }
+ printf("\r\n");
+#endif
+
+
+ mySerial.printf("AT+CIPSEND=%d\r\n", len);
+ readline();
+#ifdef ADAFRUIT_FONA_DEBUG
+ printf("\t<--- %s\r\n", replybuffer);
+#endif
+ if (replybuffer[0] != '>') return false;
+
+ for (uint16_t i=0; i<len; i++) {
+ mySerial.putc(packet[i]);
+ }
+ readline(3000); // wait up to 3 seconds to send the data
+#ifdef ADAFRUIT_FONA_DEBUG
+ printf("\t<--- %s\r\n", replybuffer);
+#endif
+
+ return (strcmp(replybuffer, "SEND OK") == 0);
+}
+
+uint16_t Adafruit_FONA::TCPavailable(void) {
+ uint16_t avail;
+
+ if (! sendParseReply("AT+CIPRXGET=4", "+CIPRXGET: 4,", &avail, ',', 0) ) return false;
+
+#ifdef ADAFRUIT_FONA_DEBUG
+ printf("%d bytes available\r\n", avail);
+#endif
+
+ return avail;
+}
+
+
+uint16_t Adafruit_FONA::TCPread(uint8_t *buff, uint8_t len) {
+ uint16_t avail;
+
+ mySerial.printf("AT+CIPRXGET=2,%d\r\n", len);
+ readline();
+ if (! parseReply("+CIPRXGET: 2,", &avail, ',', 0)) return false;
+
+ readRaw(avail);
+
+#ifdef ADAFRUIT_FONA_DEBUG
+ printf("%d bytes read\r\n", avail);
+ for (uint8_t i=0;i<avail;i++) {
+ printf(" 0x%#02x", replybuffer[i]);
+ }
+ printf("\r\n");
+#endif
+
+ memcpy(buff, replybuffer, avail);
+
+ return avail;
+}
+
+/********* HTTP LOW LEVEL FUNCTIONS ************************************/
+
+bool Adafruit_FONA::HTTP_init() {
+ return sendCheckReply("AT+HTTPINIT", "OK");
+}
+
+bool Adafruit_FONA::HTTP_term() {
+ return sendCheckReply("AT+HTTPTERM", "OK");
+}
+
+void Adafruit_FONA::HTTP_para_start(const char* parameter, bool quoted) {
+ flushInput();
+
+#ifdef ADAFRUIT_FONA_DEBUG
+ printf("\t---> AT+HTTPPARA=\"%s\"\r\n", parameter);
+#endif
+
+ mySerial.printf("AT+HTTPPARA=\"%s", parameter);
+ if (quoted)
+ mySerial.printf("\",\"");
+ else
+ mySerial.printf("\",");
+}
+
+bool Adafruit_FONA::HTTP_para_end(bool quoted) {
+ if (quoted)
+ mySerial.printf("\"\r\n");
+ else
+ mySerial.printf("\r\n");
+
+ return expectReply("OK");
+}
+
+bool Adafruit_FONA::HTTP_para(const char* parameter, const char* value) {
+ HTTP_para_start(parameter, true);
+ mySerial.printf(value);
+ return HTTP_para_end(true);
+}
+
+bool Adafruit_FONA::HTTP_para(const char* parameter, int32_t value) {
+ HTTP_para_start(parameter, false);
+ mySerial.printf("%d", value);
+ return HTTP_para_end(false);
+}
+
+bool Adafruit_FONA::HTTP_data(uint32_t size, uint32_t maxTime) {
+ flushInput();
+
+#ifdef ADAFRUIT_FONA_DEBUG
+ printf("\t---> AT+HTTPDATA=%d,%d\r\n", size, maxTime);
+#endif
+
+ mySerial.printf("AT+HTTPDATA=%d,%d\r\n", size, maxTime);
+
+ return expectReply("DOWNLOAD");
+}
+
+bool Adafruit_FONA::HTTP_action(uint8_t method, uint16_t *status, uint16_t *datalen, int32_t timeout) {
+ // Send request.
+ if (! sendCheckReply("AT+HTTPACTION=", method, "OK"))
+ return false;
+
+ // Parse response status and size.
+ readline(timeout);
+ if (! parseReply("+HTTPACTION:", status, ',', 1))
+ return false;
+ if (! parseReply("+HTTPACTION:", datalen, ',', 2))
+ return false;
+
+ return true;
+}
+
+bool Adafruit_FONA::HTTP_readall(uint16_t *datalen) {
+ getReply("AT+HTTPREAD");
+ if (! parseReply("+HTTPREAD:", datalen, ',', 0))
+ return false;
+
+ return true;
+}
+
+bool Adafruit_FONA::HTTP_ssl(bool onoff) {
+ return sendCheckReply("AT+HTTPSSL=", onoff ? 1 : 0, "OK");
+}
+
+/********* HTTP HIGH LEVEL FUNCTIONS ***************************/
+
+bool Adafruit_FONA::HTTP_GET_start(char *url, uint16_t *status, uint16_t *datalen){
+ if (! HTTP_setup(url))
+ return false;
+
+ // HTTP GET
+ if (! HTTP_action(FONA_HTTP_GET, status, datalen))
+ return false;
+
+#ifdef ADAFRUIT_FONA_DEBUG
+ printf("Status: %d\r\n", *status);
+ printf("Len: %d\r\n", *datalen);
+#endif
+
+ // HTTP response data
+ if (! HTTP_readall(datalen))
+ return false;
+
+ return true;
+}
+
+void Adafruit_FONA::HTTP_GET_end(void) {
+ HTTP_term();
+}
+
+bool Adafruit_FONA::HTTP_POST_start(char *url, const char* contenttype, const uint8_t *postdata, uint16_t postdatalen, uint16_t *status, uint16_t *datalen) {
+ if (! HTTP_setup(url))
+ return false;
+
+ if (! HTTP_para("CONTENT", contenttype)) {
+ return false;
+ }
+
+ // HTTP POST data
+ if (! HTTP_data(postdatalen, 10000))
+ return false;
+ for (uint16_t i = 0; i < postdatalen; i++) {
+ mySerial.putc(postdata[i]);
+ }
+ if (! expectReply("OK"))
+ return false;
+
+ // HTTP POST
+ if (! HTTP_action(FONA_HTTP_POST, status, datalen))
+ return false;
+
+#ifdef ADAFRUIT_FONA_DEBUG
+ printf("Status: %d\r\n", *status);
+ printf("Len: %d\r\n", *datalen);
+#endif
+
+ // HTTP response data
+ if (! HTTP_readall(datalen))
+ return false;
+
+ return true;
+}
+
+void Adafruit_FONA::HTTP_POST_end(void) {
+ HTTP_term();
+}
+
+void Adafruit_FONA::setUserAgent(const char* useragent) {
+ this->useragent = (char*) useragent;
+}
+
+void Adafruit_FONA::setHTTPSRedirect(bool onoff) {
+ httpsredirect = onoff;
+}
+
+/********* HTTP HELPERS ****************************************/
+
+bool Adafruit_FONA::HTTP_setup(char *url) {
+ // Handle any pending
+ HTTP_term();
+
+ // Initialize and set parameters
+ if (! HTTP_init())
+ return false;
+ if (! HTTP_para("CID", 1))
+ return false;
+ if (! HTTP_para("UA", useragent))
+ return false;
+ if (! HTTP_para("URL", url))
+ return false;
+
+ // HTTPS redirect
+ if (httpsredirect) {
+ if (! HTTP_para("REDIR",1))
+ return false;
+
+ if (! HTTP_ssl(true))
+ return false;
+ }
+
+ return true;
+}
+
+
+/********* HELPERS *********************************************/
+
+bool Adafruit_FONA::expectReply(const char* reply, uint16_t timeout) {
+ readline(timeout);
+#ifdef ADAFRUIT_FONA_DEBUG
+ printf("\t<--- %s\r\n", replybuffer);
+#endif
+ return (strcmp(replybuffer, reply) == 0);
+}
+
+/********* LOW LEVEL *******************************************/
+
+void Adafruit_FONA::flushInput() {
+ // Read all available serial input to flush pending data.
+ uint16_t timeoutloop = 0;
+ while (timeoutloop++ < 40) {
+ while(readable()) {
+ getc();
+ timeoutloop = 0; // If char was received reset the timer
+ }
+ wait_ms(1);
+ }
+}
+
+uint16_t Adafruit_FONA::readRaw(uint16_t b) {
+ uint16_t idx = 0;
+
+ while (b && (idx < sizeof(replybuffer)-1)) {
+ if (readable()) {
+ replybuffer[idx] = getc();
+ idx++;
+ b--;
+ }
+ }
+ replybuffer[idx] = 0;
+
+ return idx;
+}
+
+uint8_t Adafruit_FONA::readline(uint16_t timeout, bool multiline) {
+ uint16_t replyidx = 0;
+
+ while (timeout--) {
+ if (replyidx >= 254) {
+ break;
+ }
+
+ while(readable()) {
+ char c = getc();
+ if (c == '\r') continue;
+ if (c == 0xA) {
+ if (replyidx == 0) // the first 0x0A is ignored
+ continue;
+
+ if (!multiline) {
+ timeout = 0; // the second 0x0A is the end of the line
+ break;
+ }
+ }
+ replybuffer[replyidx] = c;
+ replyidx++;
+ }
+
+ if (timeout == 0) {
+ break;
+ }
+ wait_ms(1);
+ }
+ replybuffer[replyidx] = 0; // null term
+ return replyidx;
+}
+
+uint8_t Adafruit_FONA::getReply(const char* send, uint16_t timeout) {
+ flushInput();
+
+#ifdef ADAFRUIT_FONA_DEBUG
+ printf("\t---> %s\r\n", send);
+#endif
+
+ mySerial.printf("%s\r\n",send);
+
+ uint8_t l = readline(timeout);
+#ifdef ADAFRUIT_FONA_DEBUG
+ printf("\t<--- %s\r\n", replybuffer);
+#endif
+ return l;
+}
+
+// Send prefix, suffix, and newline. Return response (and also set replybuffer with response).
+uint8_t Adafruit_FONA::getReply(const char* prefix, char* suffix, uint16_t timeout) {
+ flushInput();
+
+#ifdef ADAFRUIT_FONA_DEBUG
+ printf("\t---> %s%s\r\n", prefix, suffix);
+#endif
+
+ mySerial.printf("%s%s\r\n", prefix, suffix);
+
+ uint8_t l = readline(timeout);
+#ifdef ADAFRUIT_FONA_DEBUG
+ printf("\t<--- %s\r\n", replybuffer);
+#endif
+ return l;
+}
+
+// Send prefix, suffix, and newline. Return response (and also set replybuffer with response).
+uint8_t Adafruit_FONA::getReply(const char* prefix, int32_t suffix, uint16_t timeout) {
+ flushInput();
+
+#ifdef ADAFRUIT_FONA_DEBUG
+ printf("\t---> %s%d\r\n", prefix, suffix);
+#endif
+
+ mySerial.printf("%s%d\r\n", prefix, suffix);
+
+ uint8_t l = readline(timeout);
+#ifdef ADAFRUIT_FONA_DEBUG
+ printf("\t<--- %s\r\n", replybuffer);
+#endif
+ return l;
+}
+
+// Send prefix, suffix, suffix2, and newline. Return response (and also set replybuffer with response).
+uint8_t Adafruit_FONA::getReply(const char* prefix, int32_t suffix1, int32_t suffix2, uint16_t timeout) {
+ flushInput();
+
+#ifdef ADAFRUIT_FONA_DEBUG
+ printf("\t---> %s%d,%d\r\n", prefix, suffix1, suffix2);
+#endif
+
+ mySerial.printf("%s%d,%d\r\n", prefix, suffix1, suffix2);
+
+ uint8_t l = readline(timeout);
+#ifdef ADAFRUIT_FONA_DEBUG
+ printf("\t<--- %s\r\n", replybuffer);
+#endif
+ return l;
+}
+
+// Send prefix, ", suffix, ", and newline. Return response (and also set replybuffer with response).
+uint8_t Adafruit_FONA::getReplyQuoted(const char* prefix, const char* suffix, uint16_t timeout) {
+ flushInput();
+
+#ifdef ADAFRUIT_FONA_DEBUG
+ printf("\t---> %s\"%s\"\r\n", prefix, suffix);
+#endif
+
+ mySerial.printf("%s\"%s\"\r\n", prefix, suffix);
+
+ uint8_t l = readline(timeout);
+#ifdef ADAFRUIT_FONA_DEBUG
+ printf("\t<--- %s\r\n", replybuffer);
+#endif
+ return l;
+}
+
+
+bool Adafruit_FONA::sendCheckReply(const char *send, const char *reply, uint16_t timeout) {
+ getReply(send, timeout);
+
+ return (strcmp(replybuffer, reply) == 0);
+}
+
+// Send prefix, suffix, and newline. Verify FONA response matches reply parameter.
+bool Adafruit_FONA::sendCheckReply(const char* prefix, char *suffix, const char* reply, uint16_t timeout) {
+ getReply(prefix, suffix, timeout);
+ return (strcmp(replybuffer, reply) == 0);
+}
+
+// Send prefix, suffix, and newline. Verify FONA response matches reply parameter.
+bool Adafruit_FONA::sendCheckReply(const char* prefix, int32_t suffix, const char* reply, uint16_t timeout) {
+ getReply(prefix, suffix, timeout);
+ return (strcmp(replybuffer, reply) == 0);
+}
+
+// Send prefix, suffix, suffix2, and newline. Verify FONA response matches reply parameter.
+bool Adafruit_FONA::sendCheckReply(const char* prefix, int32_t suffix1, int32_t suffix2, const char* reply, uint16_t timeout) {
+ getReply(prefix, suffix1, suffix2, timeout);
+ return (strcmp(replybuffer, reply) == 0);
+}
+
+// Send prefix, ", suffix, ", and newline. Verify FONA response matches reply parameter.
+bool Adafruit_FONA::sendCheckReplyQuoted(const char* prefix, const char* suffix, const char* reply, uint16_t timeout) {
+ getReplyQuoted(prefix, suffix, timeout);
+ return (strcmp(replybuffer, reply) == 0);
+}
+
+bool Adafruit_FONA::parseReply(const char* toreply, uint16_t *v, char divider, uint8_t index) {
+ char *p = strstr(replybuffer, toreply); // get the pointer to the voltage
+ if (p == 0) return false;
+ p += strlen(toreply);
+
+ for (uint8_t i=0; i<index;i++) {
+ // increment dividers
+ p = strchr(p, divider);
+ if (!p) return false;
+ p++;
+ }
+
+ *v = atoi(p);
+
+ return true;
+}
+
+bool Adafruit_FONA::parseReply(const char* toreply, char *v, char divider, uint8_t index) {
+ uint8_t i=0;
+ char *p = strstr(replybuffer, toreply);
+ if (p == 0) return false;
+ p+=strlen(toreply);
+
+ for (i=0; i<index;i++) {
+ // increment dividers
+ p = strchr(p, divider);
+ if (!p) return false;
+ p++;
+ }
+
+ for(i=0; i<strlen(p);i++) {
+ if(p[i] == divider)
+ break;
+ v[i] = p[i];
+ }
+
+ v[i] = '\0';
+
+ return true;
+}
+
+// Parse a quoted string in the response fields and copy its value (without quotes)
+// to the specified character array (v). Only up to maxlen characters are copied
+// into the result buffer, so make sure to pass a large enough buffer to handle the
+// response.
+bool Adafruit_FONA::parseReplyQuoted(const char* toreply, char* v, int maxlen, char divider, uint8_t index) {
+ uint8_t i=0, j;
+ // Verify response starts with toreply.
+ char *p = strstr(replybuffer, toreply);
+ if (p == 0) return false;
+ p+=strlen(toreply);
+
+ // Find location of desired response field.
+ for (i=0; i<index;i++) {
+ // increment dividers
+ p = strchr(p, divider);
+ if (!p) return false;
+ p++;
+ }
+
+ // Copy characters from response field into result string.
+ for(i=0, j=0; j<maxlen && i<strlen(p); ++i) {
+ // Stop if a divier is found.
+ if(p[i] == divider)
+ break;
+ // Skip any quotation marks.
+ else if(p[i] == '"')
+ continue;
+ v[j++] = p[i];
+ }
+
+ // Add a null terminator if result string buffer was not filled.
+ if (j < maxlen)
+ v[j] = '\0';
+
+ return true;
+}
+
+bool Adafruit_FONA::sendParseReply(const char* tosend, const char* toreply, uint16_t *v, char divider, uint8_t index) {
+ getReply(tosend);
+
+ if (! parseReply(toreply, v, divider, index)) return false;
+
+ readline(); // eat 'OK'
+
+ return true;
+}
\ No newline at end of file
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/Adafruit_FONA.h Sat Dec 05 07:22:00 2015 +0000
@@ -0,0 +1,259 @@
+/***************************************************
+ This is a library for our Adafruit FONA Cellular Module
+
+ Designed specifically to work with the Adafruit FONA
+ ----> http://www.adafruit.com/products/1946
+ ----> http://www.adafruit.com/products/1963
+
+ These displays use TTL Serial to communicate, 2 pins are required to
+ interface
+ Adafruit invests time and resources providing this open source code,
+ please support Adafruit and open-source hardware by purchasing
+ products from Adafruit!
+
+ Written by Limor Fried/Ladyada for Adafruit Industries.
+ BSD license, all text above must be included in any redistribution
+ ****************************************************/
+
+ /*
+ * Modified by Marc PLOUHINEC 27/06/2015 for use in mbed
+ */
+
+#ifndef ADAFRUIT_FONA_H
+#define ADAFRUIT_FONA_H
+
+#include "mbed.h"
+
+//#define ADAFRUIT_FONA_DEBUG
+
+#define FONA_HEADSETAUDIO 0
+#define FONA_EXTAUDIO 1
+
+#define FONA_STTONE_DIALTONE 1
+#define FONA_STTONE_BUSY 2
+#define FONA_STTONE_CONGESTION 3
+#define FONA_STTONE_PATHACK 4
+#define FONA_STTONE_DROPPED 5
+#define FONA_STTONE_ERROR 6
+#define FONA_STTONE_CALLWAIT 7
+#define FONA_STTONE_RINGING 8
+#define FONA_STTONE_BEEP 16
+#define FONA_STTONE_POSTONE 17
+#define FONA_STTONE_ERRTONE 18
+#define FONA_STTONE_INDIANDIALTONE 19
+#define FONA_STTONE_USADIALTONE 20
+
+#define FONA_DEFAULT_TIMEOUT_MS 500
+
+#define FONA_HTTP_GET 0
+#define FONA_HTTP_POST 1
+#define FONA_HTTP_HEAD 2
+
+#define RX_BUFFER_SIZE 255
+
+class Adafruit_FONA : public Stream {
+ public:
+ /**
+ * Listener for FONA events.
+ */
+ class EventListener {
+ public:
+ /**
+ * Method called when somebody call the FONA.
+ */
+ virtual void onRing() = 0;
+
+ /**
+ * Method called when the calling person stop his call.
+ */
+ virtual void onNoCarrier() = 0;
+ };
+
+ public:
+ Adafruit_FONA(PinName tx, PinName rx, PinName rst, PinName ringIndicator) :
+ _rstpin(rst, false), _ringIndicatorInterruptIn(ringIndicator),
+ apn("FONAnet"), apnusername(NULL), apnpassword(NULL), httpsredirect(false), useragent("FONA"),
+ _incomingCall(false), eventListener(NULL), mySerial(tx, rx), rxBufferInIndex(0), rxBufferOutIndex(0),
+ currentReceivedLineSize(0) {}
+ bool begin(int baudrate);
+ void setEventListener(EventListener *eventListener);
+
+ // Stream
+ virtual int _putc(int value);
+ virtual int _getc();
+ int readable();
+
+ // RTC
+ bool enableRTC(uint8_t i); // i = 0 <=> disable, i = 1 <=> enable
+
+ // Battery and ADC
+ bool getADCVoltage(uint16_t *v);
+ bool getBattPercent(uint16_t *p);
+ bool getBattVoltage(uint16_t *v);
+
+ // SIM query
+ bool unlockSIM(char *pin);
+ uint8_t getSIMCCID(char *ccid);
+ uint8_t getNetworkStatus(void);
+ uint8_t getRSSI(void);
+
+ // IMEI
+ uint8_t getIMEI(char *imei);
+
+ // set Audio output
+ bool setAudio(uint8_t a);
+ bool setVolume(uint8_t i);
+ uint8_t getVolume(void);
+ bool playToolkitTone(uint8_t t, uint16_t len);
+ bool setMicVolume(uint8_t a, uint8_t level);
+ bool playDTMF(char tone);
+
+ // FM radio functions
+ bool tuneFMradio(uint16_t station);
+ bool FMradio(bool onoff, uint8_t a = FONA_HEADSETAUDIO);
+ bool setFMVolume(uint8_t i);
+ int8_t getFMVolume();
+ int8_t getFMSignalLevel(uint16_t station);
+
+ // SMS handling
+ bool setSMSInterrupt(uint8_t i);
+ uint8_t getSMSInterrupt(void);
+ int8_t getNumSMS(void);
+ bool readSMS(uint8_t i, char *smsbuff, uint16_t max, uint16_t *readsize);
+ bool sendSMS(char *smsaddr, char *smsmsg);
+ bool deleteSMS(uint8_t i);
+ bool getSMSSender(uint8_t i, char *sender, int senderlen);
+
+ // Time
+ bool enableNetworkTimeSync(bool onoff);
+ bool enableNTPTimeSync(bool onoff, const char* ntpserver=0);
+ bool getTime(char* buff, uint16_t maxlen);
+
+ // GPRS handling
+ bool enableGPRS(bool onoff);
+ uint8_t GPRSstate(void);
+ bool getGSMLoc(uint16_t *replycode, char *buff, uint16_t maxlen);
+ bool getGSMLoc(float *lat, float *lon);
+ void setGPRSNetworkSettings(const char* apn, const char* username=0, const char* password=0);
+
+ // GPS handling
+ bool enableGPS(bool onoff);
+ int8_t GPSstatus(void);
+ uint8_t getGPS(uint8_t arg, char *buffer, uint8_t maxbuff);
+ bool getGPS(float *lat, float *lon, float *speed_kph=0, float *heading=0, float *altitude=0);
+ bool enableGPSNMEA(uint8_t nmea);
+
+ // TCP raw connections
+ bool TCPconnect(char *server, uint16_t port);
+ bool TCPclose(void);
+ bool TCPconnected(void);
+ bool TCPsend(char *packet, uint8_t len);
+ uint16_t TCPavailable(void);
+ uint16_t TCPread(uint8_t *buff, uint8_t len);
+
+ // HTTP low level interface (maps directly to SIM800 commands).
+ bool HTTP_init();
+ bool HTTP_term();
+ void HTTP_para_start(const char* parameter, bool quoted = true);
+ bool HTTP_para_end(bool quoted = true);
+ bool HTTP_para(const char* parameter, const char *value);
+ bool HTTP_para(const char* parameter, int32_t value);
+ bool HTTP_data(uint32_t size, uint32_t maxTime=10000);
+ bool HTTP_action(uint8_t method, uint16_t *status, uint16_t *datalen, int32_t timeout = 10000);
+ bool HTTP_readall(uint16_t *datalen);
+ bool HTTP_ssl(bool onoff);
+
+ // HTTP high level interface (easier to use, less flexible).
+ bool HTTP_GET_start(char *url, uint16_t *status, uint16_t *datalen);
+ void HTTP_GET_end(void);
+ bool HTTP_POST_start(char *url, const char* contenttype, const uint8_t *postdata, uint16_t postdatalen, uint16_t *status, uint16_t *datalen);
+ void HTTP_POST_end(void);
+ void setUserAgent(const char* useragent);
+
+ // HTTPS
+ void setHTTPSRedirect(bool onoff);
+
+ // PWM (buzzer)
+ bool setPWM(uint16_t period, uint8_t duty = 50);
+
+ // Phone calls
+ bool callPhone(char *phonenum);
+ bool hangUp(void);
+ bool pickUp(void);
+ bool callerIdNotification(bool enable);
+ bool incomingCallNumber(char* phonenum);
+
+ // Helper functions to verify responses.
+ bool expectReply(const char* reply, uint16_t timeout = 10000);
+
+ private:
+ DigitalOut _rstpin;
+ InterruptIn _ringIndicatorInterruptIn;
+
+ char replybuffer[255];
+ char* apn;
+ char* apnusername;
+ char* apnpassword;
+ bool httpsredirect;
+ char* useragent;
+
+ volatile bool _incomingCall;
+ EventListener *eventListener;
+ Serial mySerial;
+
+ // Circular buffer used to receive serial data from an interruption
+ int rxBuffer[RX_BUFFER_SIZE + 1];
+ volatile int rxBufferInIndex; // Index where new data is added to the buffer
+ volatile int rxBufferOutIndex; // Index where data is removed from the buffer
+ char currentReceivedLine[RX_BUFFER_SIZE]; // Array containing the current received line
+ int currentReceivedLineSize;
+
+ inline bool isRxBufferFull() {
+ return ((rxBufferInIndex + 1) % RX_BUFFER_SIZE) == rxBufferOutIndex;
+ }
+
+ inline bool isRxBufferEmpty() {
+ return rxBufferInIndex == rxBufferOutIndex;
+ }
+
+ inline void incrementRxBufferInIndex() {
+ rxBufferInIndex = (rxBufferInIndex + 1) % RX_BUFFER_SIZE;
+ }
+
+ inline void incrementRxBufferOutIndex() {
+ rxBufferOutIndex = (rxBufferOutIndex + 1) % RX_BUFFER_SIZE;
+ }
+
+ /**
+ * Method called when Serial data is received (interrupt routine).
+ */
+ void onSerialDataReceived();
+
+ // HTTP helpers
+ bool HTTP_setup(char *url);
+
+ void flushInput();
+ uint16_t readRaw(uint16_t b);
+ uint8_t readline(uint16_t timeout = FONA_DEFAULT_TIMEOUT_MS, bool multiline = false);
+ uint8_t getReply(const char* send, uint16_t timeout = FONA_DEFAULT_TIMEOUT_MS);
+ uint8_t getReply(const char* prefix, char *suffix, uint16_t timeout = FONA_DEFAULT_TIMEOUT_MS);
+ uint8_t getReply(const char* prefix, int32_t suffix, uint16_t timeout = FONA_DEFAULT_TIMEOUT_MS);
+ uint8_t getReply(const char* prefix, int32_t suffix1, int32_t suffix2, uint16_t timeout); // Don't set default value or else function call is ambiguous.
+ uint8_t getReplyQuoted(const char* prefix, const char* suffix, uint16_t timeout = FONA_DEFAULT_TIMEOUT_MS);
+
+ bool sendCheckReply(const char* send, const char* reply, uint16_t timeout = FONA_DEFAULT_TIMEOUT_MS);
+ bool sendCheckReply(const char* prefix, char *suffix, const char* reply, uint16_t timeout = FONA_DEFAULT_TIMEOUT_MS);
+ bool sendCheckReply(const char* prefix, int32_t suffix, const char* reply, uint16_t timeout = FONA_DEFAULT_TIMEOUT_MS);
+ bool sendCheckReply(const char* prefix, int32_t suffix, int32_t suffix2, const char* reply, uint16_t timeout = FONA_DEFAULT_TIMEOUT_MS);
+ bool sendCheckReplyQuoted(const char* prefix, const char* suffix, const char* reply, uint16_t timeout = FONA_DEFAULT_TIMEOUT_MS);
+
+ bool parseReply(const char* toreply, uint16_t *v, char divider = ',', uint8_t index=0);
+ bool parseReply(const char* toreply, char *v, char divider = ',', uint8_t index=0);
+ bool parseReplyQuoted(const char* toreply, char* v, int maxlen, char divider, uint8_t index);
+
+ bool sendParseReply(const char* tosend, const char* toreply, uint16_t *v, char divider = ',', uint8_t index = 0);
+
+ void onIncomingCall();
+};
+
+#endif
\ No newline at end of file
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/README.txt Sat Dec 05 07:22:00 2015 +0000 @@ -0,0 +1,38 @@ +Port of an Arduino library for Mbed by Marc PLOUHINEC (m_plouhinec@yahoo.fr). +Last update: 27/06/2015 + +The original code is available here: https://github.com/adafruit/Adafruit_FONA_Library + +Original README.TXT file content: +================================= + +Adafruit_FONA_Library +===================== + +**This library requires Arduino v1.0.6 or higher** + +This is a library for the Adafruit FONA Cellular GSM Breakouts etc + +Designed specifically to work with the Adafruit FONA Breakout + * https://www.adafruit.com/products/1946 + * https://www.adafruit.com/products/1963 + * http://www.adafruit.com/products/2468 + * http://www.adafruit.com/products/2542 + +These modules use TTL Serial to communicate, 2 pins are required to interface + +Adafruit invests time and resources providing this open source code, +please support Adafruit and open-source hardware by purchasing +products from Adafruit! + +Check out the links above for our tutorials and wiring diagrams + +Written by Limor Fried/Ladyada for Adafruit Industries. +BSD license, all text above must be included in any redistribution +With updates from Samy Kamkar + +To download. click the DOWNLOADS button in the top right corner, rename the uncompressed folder Adafruit_FONA +Check that the Adafruit_FONA folder contains Adafruit_FONA.cpp and Adafruit_FONA.h + +Place the Adafruit_FONA library folder your *arduinosketchfolder*/libraries/ folder. +You may need to create the libraries subfolder if its your first library. Restart the IDE.