Revision 17:b3545e9d38f7, committed 2014-08-26

Comitter:

WillemBraat

Date:

Tue Aug 26 14:18:39 2014 +0000

Parent:

16:3c251cf29501

Commit message:

All pin-definitions are driven by pins.h

Changed in this revision

--- a/display.cpp	Tue Aug 26 14:02:48 2014 +0000
+++ b/display.cpp	Tue Aug 26 14:18:39 2014 +0000
@@ -3,9 +3,11 @@
 #include "TFT_4DGL.h"
 #include "display.h"
 #include <string>
+#include "pins.h"
 using namespace std;
-DigitalOut VGA_SOURCE( p7 ); //control line for video switch between INT and EXT video
-DigitalOut VGA_SELECT( p8 ); //control line to select/deselect video switch
+
+DigitalOut VGA_SOURCE( VGA_SOURCE_SELECT ); //control line for video switch between INT and EXT video
+DigitalOut VGA_SELECT( VGA_ON_OFF ); //control line to select/deselect video switch
 /*
 =====================================================
 SGC (Serial Graphics Controller) PLATFORM OUTPUT FILE
@@ -86,8 +88,10 @@
  Maximum length is 24 characters, minimum length is 1 character for font F0
 Maximum length is 48 characters, minumum length is 1 character for font F1.
 */
+
 //Control lines for VGA driver board
-TFT_4DGL display(p13,p14,p15); // serial tx, serial rx, reset pin
+TFT_4DGL display(VGA_TX,VGA_RX,VGA_RESET); // serial tx, serial rx, reset pin
+
 //Character & String functions
 char* str2char( string cString ) //convert a string to a character array
     {

--- a/keyboard2.cpp	Tue Aug 26 14:02:48 2014 +0000
+++ b/keyboard2.cpp	Tue Aug 26 14:18:39 2014 +0000
@@ -6,6 +6,7 @@
 #include "keyboard.h"
 #include "mbos.h"
 #include "mbos_def2.h"
+#include "pins.h"
  
 const int CDU_KB_ADRS  = 0x68;  //Base address TCA8418 keypad scanner
 const int I2C_ACK  = 0x00;
@@ -16,22 +17,22 @@
 extern MODSERIAL SERIAL_DEBUG;
  
 //CDU Keyboard communications KEYBOARD_INT
-InterruptIn CDU_KB_INT( p5 );  //Set CDU keyboard interrupt line
-I2C CDU_I2C(p28, p27);         //I2C bus for keyboard/temp chip.
+InterruptIn CDU_KB_INT( KBD_INT );  //Set CDU keyboard interrupt line
+I2C CDU_I2C(I2C_SDA, I2C_SCL);         //I2C bus for keyboard/temp chip.
  
 //CDU Keyboard LEDS
-DigitalOut EXEC( p12 );
-DigitalOut FAIL( p17 );
-DigitalOut DSPY( p18 ); 
-DigitalOut  MSG( p19 );
-DigitalOut OFST( p20 );
+DigitalOut EXEC( LED_EXEC );
+DigitalOut FAIL( LED_FAIL );
+DigitalOut DSPY( LED_DSPY ); 
+DigitalOut  MSG( LED_MSG  );
+DigitalOut OFST( LED_OFST );
  
 //CDU background lighting
-AnalogIn BGL_POT( p16 ); //background light control potmeter
-PwmOut BGL_LED( p21 );   //PWM output background lighting
+AnalogIn BGL_POT( BACKLIGHT_SET ); //background light control potmeter
+PwmOut BGL_LED( BACKLIGHT_DRIVE );   //PWM output background lighting
 
 // ---- added by LvdK : -----------------------------------------------------------
-DigitalOut Key_led(LED2); // : LED 2 on Mbed board toggles when CDU key is pressed
+DigitalOut Key_led( KEY_PRESSED ); // : LED 2 on Mbed board toggles when CDU key is pressed
 // --------------------------------------------------------------------------------
  
 void CDU_KB_COMM_INIT()

--- a/main.cpp	Tue Aug 26 14:02:48 2014 +0000
+++ b/main.cpp	Tue Aug 26 14:18:39 2014 +0000
@@ -7,17 +7,18 @@
 #include "MODSERIAL.h"
 #include "mbos.h"
 #include "mbos_def2.h"   // : Mbos tasks, timer and resource definitions
+#include "pins.h"
 
 // Setup USB communication defined by Mbed USB TX and RX lines
 // with TX and RX ringbuffers :
 MODSERIAL USB(USBTX, USBRX, 256, 1024);
-DigitalOut alive_led(LED1); // : LED 1 on Mbed board toggles when CDU is alive
+DigitalOut alive_led( HEARTBEAT ); // : LED 1 on Mbed board toggles when CDU is alive
 
 //void test_update_flags(); // << for testing only << !!!!!!!
 
 // --- Debug only ----------------------------------------
 // extra serial port to show debug info :
-  MODSERIAL SERIAL_DEBUG(p9, p10, 512, 64);  //: tx, rx
+  MODSERIAL SERIAL_DEBUG(MODSERIAL_TX, MODSERIAL_RX, 512, 64);  //: tx, rx
 // -------------------------------------------------------
 
 int CDU_FS_interface = 0;   // : defines interface to FS: 0 = USB, 1 = Ethernet

--- a/pins.h	Tue Aug 26 14:02:48 2014 +0000
+++ b/pins.h	Tue Aug 26 14:18:39 2014 +0000
@@ -1,3 +1,7 @@
+#define HW_VERSION_1
+
+
+
 #ifdef HW_VERSION_1
     //NOTE: THESE PIN DEFINITIONS ARE FOR HARDWARE VERSION 1.0
     //
@@ -6,7 +10,7 @@
     //*********************************
     //MODSERIAL SERIAL_DEBUG(p9, p10, 512, 64);  //: tx, rx
     #define MODSERIAL_TX        p9
-    #define MODESERIAL_RX       p10
+    #define MODSERIAL_RX       p10
     //DigitalOut alive_led(LED1); // : LED 1 on Mbed board toggles when CDU is alive
     #define HEARTBEAT           LED1
 
@@ -31,8 +35,8 @@
     //InterruptIn CDU_KB_INT( p5 );  //Set CDU keyboard interrupt line
     //I2C CDU_I2C(p28, p27);         //I2C bus for keyboard/temp chip.
     #define KBD_INT             p5
-    #define KBD_TMP_SDA         p28
-    #define KBD_TMP_SCL         p27
+    #define I2C_SDA             p28
+    #define I2C_SCL             p27
 
     //CDU Keyboard LEDS
     #define LED_EXEC            p12