Revision 23:eca4414196ca, committed 2013-06-13

Comitter:

ttodorov

Date:

Thu Jun 13 03:47:51 2013 +0000

Parent:

22:4c169297f374

Child:

24:ac6e35658037

Commit message:

- ILI9328 driver not working yet

Changed in this revision

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/ili9328.cpp	Thu Jun 13 03:47:51 2013 +0000
@@ -0,0 +1,263 @@
+/*
+ * Copyright (C)2010-2012 Henning Karlsen. All right reserved.
+ * Copyright (C)2012-2013 Todor Todorov.
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2.1 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, write to:
+ *
+ * Free Software Foundation, Inc.
+ * 51 Franklin St, 5th Floor, Boston, MA 02110-1301, USA
+ *
+ *********************************************************************/
+#include "ili9328.h"
+#include "helpers.h"
+
+#define REG_START_OSC                   0x00
+
+#define REG_DRIV_OUT_CTRL               0x01
+#define REG_DRIV_WAV_CTRL               0x02
+#define REG_ENTRY_MOD                   0x03
+#define REG_RESIZE_CTRL                 0x04
+#define REG_DISP_CTRL1                  0x07
+#define REG_DISP_CTRL2                  0x08
+#define REG_DISP_CTRL3                  0x09
+#define REG_DISP_CTRL4                  0x0A
+#define REG_RGB_DISP_IF_CTRL1           0x0C
+#define REG_FRM_MARKER_POS              0x0D
+#define REG_RGB_DISP_IF_CTRL2           0x0F
+#define REG_PWR_CTRL1                   0x10
+#define REG_PWR_CTRL2                   0x11
+#define REG_PWR_CTRL3                   0x12
+#define REG_PWR_CTRL4                   0x13
+#define REG_GRAM_HORIZONTAL_ADDR        0x20
+#define REG_GRAM_VERTICAL_ADDR          0x21
+#define REG_GRAM_READWRITE              0x22
+#define REG_PWR_CTRL7                   0x29
+#define REG_FRM_RATE_COL_CTRL           0x2B
+#define REG_GAMMA_CTRL1                 0x30
+#define REG_GAMMA_CTRL2                 0x31
+#define REG_GAMMA_CTRL3                 0x32
+#define REG_GAMMA_CTRL4                 0x35
+#define REG_GAMMA_CTRL5                 0x36
+#define REG_GAMMA_CTRL6                 0x37
+#define REG_GAMMA_CTRL7                 0x38
+#define REG_GAMMA_CTRL8                 0x39
+#define REG_GAMMA_CTRL9                 0x3C
+#define REG_GAMMA_CTRL10                0x3D
+#define REG_HORIZONTAL_START_ADDR       0x50
+#define REG_HORIZONTAL_END_ADDR         0x51
+#define REG_VERTICAL_START_ADDR         0x52
+#define REG_VERTICAL_END_ADDR           0x53
+#define REG_GATE_SCAN_CTRL1             0x60
+#define REG_GATE_SCAN_CTRL2             0x61
+#define REG_GATE_SCAN_CTRL3             0x6A
+#define REG_PART_IMG1_DISP_POS          0x80
+#define REG_PART_IMG1_START_ADDR        0x81
+#define REG_PART_IMG1_END_ADDR          0x82
+#define REG_PART_IMG2_DISP_POS          0x83
+#define REG_PART_IMG2_START_ADDR        0x84
+#define REG_PART_IMG2_END_ADDR          0x85
+#define REG_PANEL_IF_CTRL1              0x90
+#define REG_PANEL_IF_CTRL2              0x92
+#define REG_PANEL_IF_CTRL3              0x93
+#define REG_PANEL_IF_CTRL4              0x95
+#define REG_PANEL_IF_CTRL5              0x97
+#define REG_PANEL_IF_CTRL6              0x98
+
+ILI9328_LCD::ILI9328_LCD( PinName CS, PinName RESET, PinName RS, PinName WR, BusOut* DATA_PORT, PinName BL, PinName RD, backlight_t blType, float defaultBackLightLevel )
+    : LCD( 240, 320, CS, RS, RESET, BL, blType, defaultBackLightLevel ), _lcd_pin_wr( WR )
+{
+    _lcd_port = DATA_PORT;
+    if ( RD != NC ) _lcd_pin_rd = new DigitalOut( RD );
+    else _lcd_pin_rd = 0;
+}
+
+void ILI9328_LCD::Initialize( orientation_t orientation, colordepth_t colors )
+{
+    _orientation = orientation;
+    _colorDepth = colors;
+    
+    _lcd_pin_reset = HIGH;
+    wait_ms( 50 );
+    _lcd_pin_reset = LOW;
+    wait_ms( 100 );
+    _lcd_pin_reset = HIGH;
+    wait_ms( 1000 );
+    _lcd_pin_cs = HIGH;
+    if ( _lcd_pin_bl != 0 )
+        *_lcd_pin_bl = HIGH;
+    else if ( _bl_pwm != 0 )
+        *_bl_pwm = _bl_pwm_default;
+    if ( _lcd_pin_rd != 0 )
+        *_lcd_pin_rd = HIGH;
+    _lcd_pin_wr = HIGH;
+    wait_ms( 15 );
+    
+    Activate();
+    //WriteCmdData( 0x00, 0x0001 ); // oscillator: 1 = on, 0 = off
+    //wait_ms( 1 );
+    WriteCmdData( REG_DRIV_OUT_CTRL, 0x0100 );  // Driver Output Control Register (R01h)
+    WriteCmdData( REG_DRIV_WAV_CTRL, 0x0700 );  // LCD Driving Waveform Control (R02h)
+    WriteCmdData( REG_ENTRY_MOD, 0x1030 );      // Entry Mode (R03h) (BGR=on;ID1=on;ID2=on;AM=0)
+    WriteCmdData( REG_DISP_CTRL2, 0x0302 );
+    WriteCmdData( REG_DISP_CTRL3, 0x0000 );
+    WriteCmdData( REG_DISP_CTRL4, 0x0000 );     // Fmark On
+    WriteCmdData( REG_PWR_CTRL1, 0x0000 );      // Power Control 1 (R10h)
+    WriteCmdData( REG_PWR_CTRL2, 0x0007 );      // Power Control 2 (R11h)
+    WriteCmdData( REG_PWR_CTRL3, 0x0000 );      // Power Control 3 (R12h)
+    WriteCmdData( REG_PWR_CTRL4, 0x0000 );      // Power Control 4 (R13h)
+    wait_ms( 1000 );  
+    WriteCmdData( REG_PWR_CTRL1, 0x14B0 );      // Power Control 1 (R10h)  
+    wait_ms( 500 );  
+    WriteCmdData( REG_PWR_CTRL2, 0x0007 );      // Power Control 2 (R11h)  
+    wait_ms( 500 );  
+    WriteCmdData( REG_PWR_CTRL3, 0x008E );      // Power Control 3 (R12h)
+    WriteCmdData( REG_PWR_CTRL4, 0x0C00 );      // Power Control 4 (R13h)
+    WriteCmdData( REG_PWR_CTRL7, 0x0015 );      // NVM read data 2 (R29h)
+    wait_ms( 500 );
+    WriteCmdData( REG_GAMMA_CTRL1, 0x0000 );         // Gamma Control 1
+    WriteCmdData( REG_GAMMA_CTRL2, 0x0107 );         // Gamma Control 2
+    WriteCmdData( REG_GAMMA_CTRL3, 0x0000 );         // Gamma Control 3
+    WriteCmdData( REG_GAMMA_CTRL4, 0x0203 );         // Gamma Control 4
+    WriteCmdData( REG_GAMMA_CTRL5, 0x0402 );         // Gamma Control 5
+    WriteCmdData( REG_GAMMA_CTRL6, 0x0000 );         // Gamma Control 6
+    WriteCmdData( REG_GAMMA_CTRL7, 0x0207 );         // Gamma Control 7
+    WriteCmdData( REG_GAMMA_CTRL8, 0x0000 );         // Gamma Control 8
+    WriteCmdData( REG_GAMMA_CTRL9, 0x0203 );         // Gamma Control 9
+    WriteCmdData( REG_GAMMA_CTRL10, 0x0403 );        // Gamma Control 10
+    WriteCmdData( REG_HORIZONTAL_START_ADDR, 0x0000 );                      // Window Horizontal RAM Address Start (R50h)
+    WriteCmdData( REG_HORIZONTAL_END_ADDR, _disp_width - 1);   // Window Horizontal RAM Address End (R51h)
+    WriteCmdData( REG_VERTICAL_START_ADDR, 0x0000 );                        // Window Vertical RAM Address Start (R52h)
+    WriteCmdData( REG_VERTICAL_END_ADDR, _disp_height - 1);    // Window Vertical RAM Address End (R53h)
+    WriteCmdData( REG_GATE_SCAN_CTRL1, 0xa700 );    // Driver Output Control (R60h)
+    WriteCmdData( REG_GATE_SCAN_CTRL2, 0x0003 ); // Driver Output Control (R61h) - enable VLE
+    WriteCmdData( REG_PANEL_IF_CTRL1, 0x0010 );  // Panel Interface Control 1 (R90h)
+
+    // Display On
+    WriteCmdData( REG_DISP_CTRL1, 0x0133 );     // Display Control (R07h)
+    wait_ms( 500 );
+    WriteCmd( REG_GRAM_READWRITE );
+  
+    Deactivate();
+}
+
+void ILI9328_LCD::Sleep( void )
+{
+    //WriteCmdData( 0x10, 0x0001 ); // sleep mode: 0 = exit, 1 = enter
+    LCD::Sleep();
+}
+
+void ILI9328_LCD::WakeUp( void )
+{
+    //WriteCmdData( 0x10, 0x0000 ); // sleep mode: 0 = exit, 1 = enter
+    LCD::WakeUp();
+}
+
+void ILI9328_LCD::WriteCmd( unsigned short cmd )
+{
+    _lcd_pin_rs = LOW;
+    _lcd_port->write( cmd );
+    pulseLow( _lcd_pin_wr );
+}
+
+void ILI9328_LCD::WriteData( unsigned short data )
+{
+    _lcd_pin_rs = HIGH;
+    _lcd_port->write( data );
+    pulseLow( _lcd_pin_wr );
+}
+
+void ILI9328_LCD::SetXY( unsigned short x1, unsigned short y1, unsigned short x2, unsigned short y2 )
+{
+    /*
+    if ( _orientation == PORTRAIT || _orientation == PORTRAIT_REV )
+    {
+        WriteCmdData( 0x44, ( x2 << 8 ) + x1 );
+        WriteCmdData( 0x45, y1 );
+        WriteCmdData( 0x46, y2 );
+        WriteCmdData( 0x4e, x1 );
+        WriteCmdData( 0x4f, y1 );
+    }
+    else
+    {
+        WriteCmdData( 0x44, ( y2 << 8 ) + y1 );
+        WriteCmdData( 0x45, x1 );
+        WriteCmdData( 0x46, x2 );
+        WriteCmdData( 0x4e, y1 );
+        WriteCmdData( 0x4f, x1 );
+    }
+    */
+    WriteCmdData( REG_HORIZONTAL_START_ADDR, x1 );
+    WriteCmdData( REG_HORIZONTAL_END_ADDR, x2 );
+    WriteCmdData( REG_VERTICAL_START_ADDR, y1 );
+    WriteCmdData( REG_VERTICAL_END_ADDR, y2 );
+    WriteCmdData( REG_GRAM_HORIZONTAL_ADDR, x1 );
+    WriteCmdData( REG_GRAM_VERTICAL_ADDR, y1 );
+    WriteCmd( 0x22 );
+}
+
+void ILI9328_LCD::SetPixelColor( unsigned int color, colordepth_t mode )
+{
+    unsigned char r, g, b;
+    unsigned short clr;
+    if ( _colorDepth == RGB16 )
+    {
+        switch ( mode )
+        {
+            case RGB16:
+                WriteData( color & 0xFFFF );
+                break;
+            case RGB18:
+                r = ( color >> 10 ) & 0xF8;
+                g = ( color >> 4 ) & 0xFC;
+                b = ( color >> 1 ) & 0x1F;
+                clr = ( ( r | ( g >> 5 ) ) << 8 ) | ( ( g << 3 ) | b );
+                WriteData( clr );
+                break;
+            case RGB24:
+                r = ( color >> 16 ) & 0xF8;
+                g = ( color >> 8 ) & 0xFC;
+                b = color & 0xF8;
+                clr = ( ( r | ( g >> 5 ) ) << 8 ) | ( ( g << 3 ) | ( b >> 3 ) );
+                WriteData( clr );
+                break;
+        }
+    }
+    else if ( _colorDepth == RGB18 )
+    {
+        switch ( mode )
+        {
+            case RGB16:
+                r = ( ( color >> 8 ) & 0xF8 ) | ( ( color & 0x8000 ) >> 13 );
+                g = ( color >> 3 ) & 0xFC;
+                b = ( ( color << 3 ) & 0xFC ) | ( ( color >> 3 ) & 0x01 );
+                WriteData( ( r << 8 ) | g );
+                WriteData( b );
+                break;
+            case RGB18:
+                b = ( color << 2 ) & 0xFC;
+                g = ( color >> 4 ) & 0xFC;
+                r = ( color >> 10 ) & 0xFC;
+                WriteData( ( r << 8 ) | g );
+                WriteData( b );
+                break;
+            case RGB24:
+                r = ( color >> 16 ) & 0xFC;
+                g = ( color >> 8 ) & 0xFC;
+                b = color & 0xFC;
+                WriteData( ( r << 8 ) | g );
+                WriteData( b );
+                break;
+        }
+    }
+}

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/ili9328.h	Thu Jun 13 03:47:51 2013 +0000
@@ -0,0 +1,63 @@
+/** \file ili9328.h
+ *  \brief mbed LCD driver for displays with the ILI9328 controller.
+ *  \copyright GNU Public License, v2. or later
+ *
+ * This library is based on the Arduino/chipKIT UTFT library by Henning
+ * Karlsen, http://henningkarlsen.com/electronics/library.php?id=52
+ *
+ * Copyright (C)2010-2012 Henning Karlsen. All right reserved.
+ *
+ * Copyright (C)2012-2013 Todor Todorov.
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2.1 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, write to:
+ *
+ * Free Software Foundation, Inc.
+ * 51 Franklin St, 5th Floor, Boston, MA 02110-1301, USA
+ *
+ *********************************************************************/
+#ifndef TFTLCD_ILI9328_H
+#define TFTLCD_ILI9328_H
+
+#include "lcd_base.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+class ILI9328_LCD : public LCD
+{
+public:
+    ILI9328_LCD( PinName CS, PinName RESET, PinName RS, PinName WR, BusOut* DATA_PORT, PinName BL = NC, PinName RD = NC, backlight_t blType = Constant, float defaultBackLightLevel = 1.0 );
+    virtual void Initialize( orientation_t orientation = LANDSCAPE, colordepth_t colors = RGB16 );
+    virtual void Sleep( void );
+    virtual void WakeUp( void );
+
+protected:
+    virtual void WriteCmd( unsigned short cmd );
+    virtual void WriteData( unsigned short data );
+    virtual void SetXY( unsigned short x1, unsigned short y1, unsigned short x2, unsigned short y2 );
+    virtual void SetPixelColor( unsigned int color, colordepth_t mode = RGB24 );
+
+private:
+    DigitalOut  _lcd_pin_wr;
+    BusOut*     _lcd_port;
+    DigitalOut* _lcd_pin_bl;
+    DigitalOut* _lcd_pin_rd;
+};
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* TFTLCD_ILI9328_H */