Revision 0:cad38d31219a, committed 2015-03-03

Comitter:

jaredwil

Date:

Tue Mar 03 19:24:53 2015 +0000

Commit message:

part3;

Changed in this revision

diff -r 000000000000 -r cad38d31219a MMA7660.lib
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/MMA7660.lib	Tue Mar 03 19:24:53 2015 +0000
@@ -0,0 +1,1 @@
+http://developer.mbed.org/users/Sissors/code/MMA7660/#36a163511e34

diff -r 000000000000 -r cad38d31219a main.cpp
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp	Tue Mar 03 19:24:53 2015 +0000
@@ -0,0 +1,69 @@
+//Uses the measured z-acceleration to drive leds 2 and 3 of the mbed
+ 
+#include "mbed.h"
+#include "MMA7660.h"
+ 
+MMA7660 MMA(p28, p27);
+BusOut leds(LED1,LED2,LED3,LED4);
+
+//used for debugging
+Serial pc(USBTX, USBRX);
+ 
+int main() {  
+    if (MMA.testConnection())
+        leds = 0x1;
+        wait(1);
+        leds = 0x0;
+        float x = 0, y = 0, z = 0;
+    while(1) {
+        leds = 0x0;
+        x = MMA.x();
+        y = MMA.y();
+        z = MMA.z();
+        
+//NOTE: All directions based on looking at device with MBED cord towards
+//the user       
+        if(x > 0.5){  //Forward
+            leds = 0x6;
+            wait(1);
+        }
+        if(x < -0.5){  //Backwards
+            leds = 0x9;
+            wait(1);
+        }
+         if(y > 0.5){  //LEFT
+            leds = 0xE;
+            wait(1);
+        }
+        if(y < -0.5){  //RIGHT
+            leds = 0x7;
+            wait(1);
+        }
+        if((z) > 1.2){  //UP
+            leds = 0xF;
+            wait(1);
+        }
+        if((z) < 0.5){  //DOWN
+            leds = 0xA;
+            wait(0.2);
+            leds = 0x5;
+            wait(0.2);
+            leds = 0xA;
+            wait(0.2);
+            leds = 0x5;
+            wait(0.2);
+            leds = 0xA;
+            wait(0.2);
+            leds = 0x5;
+            wait(0.2);
+        }
+        
+        
+        
+        
+        //for debug
+        //pc.printf("x: %f  y: %f z: %f \r",MMA.x(),MMA.y(),MMA.z());
+      
+    }
+ 
+}

diff -r 000000000000 -r cad38d31219a mbed.bld
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed.bld	Tue Mar 03 19:24:53 2015 +0000
@@ -0,0 +1,1 @@
+http://mbed.org/users/mbed_official/code/mbed/builds/9ad691361fac
\ No newline at end of file