ENSMM
USBDevice with Nucleo 32L476RG support
Dependents: ObCP_ENSMM_V2020_Test_Accelero
Revision 62:c1549af978d6, committed 2016-04-29
- Comitter:
- mbed_official
- Date:
- Fri Apr 29 01:16:25 2016 +0100
- Parent:
- 61:d17693b10ae6
- Child:
- 63:01321bd6ff89
- Commit message:
- Synchronized with git revision fe9720f24b1adc71ab6962506ec51290f6afd270
Full URL: https://github.com/mbedmicro/mbed/commit/fe9720f24b1adc71ab6962506ec51290f6afd270/
[Renesas RZ/A1H] Enable asynchronous communications
Changed in this revision
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/USBDevice/TARGET_RENESAS/TARGET_VK_RZ_A1H/inc/devdrv_usb_function_api.h Fri Apr 29 01:16:25 2016 +0100
@@ -0,0 +1,365 @@
+/*******************************************************************************
+* DISCLAIMER
+* This software is supplied by Renesas Electronics Corporation and is only
+* intended for use with Renesas products. No other uses are authorized. This
+* software is owned by Renesas Electronics Corporation and is protected under
+* all applicable laws, including copyright laws.
+* THIS SOFTWARE IS PROVIDED "AS IS" AND RENESAS MAKES NO WARRANTIES REGARDING
+* THIS SOFTWARE, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING BUT NOT
+* LIMITED TO WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE
+* AND NON-INFRINGEMENT. ALL SUCH WARRANTIES ARE EXPRESSLY DISCLAIMED.
+* TO THE MAXIMUM EXTENT PERMITTED NOT PROHIBITED BY LAW, NEITHER RENESAS
+* ELECTRONICS CORPORATION NOR ANY OF ITS AFFILIATED COMPANIES SHALL BE LIABLE
+* FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR
+* ANY REASON RELATED TO THIS SOFTWARE, EVEN IF RENESAS OR ITS AFFILIATES HAVE
+* BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
+* Renesas reserves the right, without notice, to make changes to this software
+* and to discontinue the availability of this software. By using this software,
+* you agree to the additional terms and conditions found by accessing the
+* following link:
+* http://www.renesas.com/disclaimer
+* Copyright (C) 2012 - 2014 Renesas Electronics Corporation. All rights reserved.
+*******************************************************************************/
+/*******************************************************************************
+* File Name : devdrv_usb_function_api.h
+* $Rev: 1116 $
+* $Date:: 2014-07-09 16:29:19 +0900#$
+* Description : RZ/A1H R7S72100 USB Sample Program
+*******************************************************************************/
+#ifndef USB_FUNCTION_API_H
+#define USB_FUNCTION_API_H
+
+
+/*******************************************************************************
+Includes <System Includes> , "Project Includes"
+*******************************************************************************/
+#include <VKRZA1H.h>
+#include "r_typedefs.h"
+#include "usb0_function_api.h"
+#include "usb1_function_api.h"
+
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/*******************************************************************************
+Typedef definitions
+*******************************************************************************/
+typedef struct
+{
+ uint32_t fifo;
+ uint32_t buffer;
+ uint32_t bytes;
+ uint32_t dir;
+ uint32_t size;
+} USB_FUNCTION_DMA_t;
+
+
+/*******************************************************************************
+Macro definitions
+*******************************************************************************/
+#define USBFCLOCK_X1_48MHZ (0x0000u) /* USB_X1_48MHz */
+#define USBFCLOCK_EXTAL_12MHZ (0x0004u) /* EXTAL_12MHz */
+
+#define DEVDRV_USBF_ON (1)
+#define DEVDRV_USBF_OFF (0)
+#define DEVDRV_USBF_YES (1)
+#define DEVDRV_USBF_NO (0)
+
+#define DEVDRV_USBF_STALL (-2)
+
+#define DEVDRV_USBF_WRITEEND (0)
+#define DEVDRV_USBF_WRITESHRT (1)
+#define DEVDRV_USBF_WRITING (2)
+#define DEVDRV_USBF_WRITEDMA (3)
+
+#define DEVDRV_USBF_FIFOERROR (0xffff)
+
+#define DEVDRV_USBF_PIPE_IDLE (0x00)
+#define DEVDRV_USBF_PIPE_WAIT (0x01)
+#define DEVDRV_USBF_PIPE_DONE (0x02)
+#define DEVDRV_USBF_PIPE_NORES (0x03)
+#define DEVDRV_USBF_PIPE_STALL (0x04)
+
+#define DEVDRV_USBF_PID_NAK (0x0000u)
+#define DEVDRV_USBF_PID_BUF (0x0001u)
+#define DEVDRV_USBF_PID_STALL (0x0002u)
+#define DEVDRV_USBF_PID_STALL2 (0x0003u)
+
+#define USB_FUNCTION_NON_SPEED (0)
+#define USB_FUNCTION_LOW_SPEED (1)
+#define USB_FUNCTION_FULL_SPEED (2)
+#define USB_FUNCTION_HIGH_SPEED (3)
+
+#define USB_FUNCTION_READEND (0)
+#define USB_FUNCTION_READSHRT (1)
+#define USB_FUNCTION_READING (2)
+#define USB_FUNCTION_READOVER (3)
+#define USB_FUNCTION_READZERO (4)
+
+#define USB_FUNCTION_MAX_PIPE_NO (15u)
+#define USB_FUNCTION_PIPE0 (0)
+#define USB_FUNCTION_PIPE1 (1)
+#define USB_FUNCTION_PIPE2 (2)
+#define USB_FUNCTION_PIPE3 (3)
+#define USB_FUNCTION_PIPE4 (4)
+#define USB_FUNCTION_PIPE5 (5)
+#define USB_FUNCTION_PIPE6 (6)
+#define USB_FUNCTION_PIPE7 (7)
+#define USB_FUNCTION_PIPE8 (8)
+#define USB_FUNCTION_PIPE9 (9)
+#define USB_FUNCTION_PIPEA (10)
+#define USB_FUNCTION_PIPEB (11)
+#define USB_FUNCTION_PIPEC (12)
+#define USB_FUNCTION_PIPED (13)
+#define USB_FUNCTION_PIPEE (14)
+#define USB_FUNCTION_PIPEF (15)
+
+#define USB_FUNCTION_ISO (0xc000u)
+#define USB_FUNCTION_INTERRUPT (0x8000u)
+#define USB_FUNCTION_BULK (0x4000u)
+
+#define USB_FUNCTION_NONE (0x0000u)
+#define USB_FUNCTON_BFREFIELD (0x0400u)
+#define USB_FUNCTION_BFREON (0x0400u)
+#define USB_FUNCTION_BFREOFF (0x0000u)
+#define USB_FUNCTION_DBLBFIELD (0x0200u)
+#define USB_FUNCTION_DBLBON (0x0200u)
+#define USB_FUNCTION_DBLBOFF (0x0000u)
+#define USB_FUNCTION_CNTMDFIELD (0x0100u)
+#define USB_FUNCTION_CNTMDON (0x0100u)
+#define USB_FUNCTION_CNTMDOFF (0x0000u)
+#define USB_FUNCTION_SHTNAKON (0x0080u)
+#define USB_FUNCTION_SHTNAKOFF (0x0000u)
+#define USB_FUNCTION_DIRFIELD (0x0010u)
+#define USB_FUNCTION_DIR_P_OUT (0x0000u)
+#define USB_FUNCTION_DIR_P_IN (0x0010u)
+#define USB_FUNCTION_EPNUMFIELD (0x000fu)
+#define USB_FUNCTION_MAX_EP_NO (15u)
+#define USB_FUNCTION_EP0 (0u)
+#define USB_FUNCTION_EP1 (1u)
+#define USB_FUNCTION_EP2 (2u)
+#define USB_FUNCTION_EP3 (3u)
+#define USB_FUNCTION_EP4 (4u)
+#define USB_FUNCTION_EP5 (5u)
+#define USB_FUNCTION_EP6 (6u)
+#define USB_FUNCTION_EP7 (7u)
+#define USB_FUNCTION_EP8 (8u)
+#define USB_FUNCTION_EP9 (9u)
+#define USB_FUNCTION_EP10 (10u)
+#define USB_FUNCTION_EP11 (11u)
+#define USB_FUNCTION_EP12 (12u)
+#define USB_FUNCTION_EP13 (13u)
+#define USB_FUNCTION_EP14 (14u)
+#define USB_FUNCTION_EP15 (15u)
+
+#define USB_FUNCTION_EPTABLE_LENGTH (5u)
+
+#define USB_FUNCTION_CUSE (0)
+#define USB_FUNCTION_D0USE (1)
+#define USB_FUNCTION_D0DMA (2)
+#define USB_FUNCTION_D1USE (3)
+#define USB_FUNCTION_D1DMA (4)
+
+#define USB_FUNCTION_CFIFO_USE (0x0000)
+#define USB_FUNCTION_D0FIFO_USE (0x1000)
+#define USB_FUNCTION_D1FIFO_USE (0x2000)
+#define USB_FUNCTION_D0FIFO_DMA (0x5000)
+#define USB_FUNCTION_D1FIFO_DMA (0x6000)
+
+#define USB_FUNCTION_BUF2FIFO (0)
+#define USB_FUNCTION_FIFO2BUF (1)
+
+#define USB_FUNCTION_DVST_POWERED (0x0001)
+#define USB_FUNCTION_DVST_DEFAULT (0x0002)
+#define USB_FUNCTION_DVST_ADDRESS (0x0003)
+#define USB_FUNCTION_DVST_CONFIGURED (0x0004)
+#define USB_FUNCTION_DVST_SUSPEND (0x0005)
+#define USB_FUNCTION_DVST_CONFIGURED_SUSPEND (0x0006)
+
+#define USB_FUNCTION_FUNCTION_TEST_SELECT (0xff00u)
+#define USB_FUNCTION_FUNCTION_TEST_J (0x0100u)
+#define USB_FUNCTION_FUNCTION_TEST_K (0x0200u)
+#define USB_FUNCTION_FUNCTION_TEST_SE0_NAK (0x0300u)
+#define USB_FUNCTION_FUNCTION_TEST_PACKET (0x0400u)
+#define USB_FUNCTION_FUNCTION_TEST_FORCE_ENABLE (0x0500u)
+#define USB_FUNCTION_FUNCTION_TEST_STSelectors (0x0600u)
+#define USB_FUNCTION_FUNCTION_TEST_Reserved (0x4000u)
+#define USB_FUNCTION_FUNCTION_TEST_VSTModes (0xc000u)
+
+#define USB_FUNCTION_DT_TYPE (0xff00u)
+#define USB_FUNCTION_DT_INDEX (0xff)
+#define USB_FUNCTION_DT_DEVICE (0x01)
+#define USB_FUNCTION_DT_CONFIGURATION (0x02)
+#define USB_FUNCTION_DT_STRING (0x03)
+#define USB_FUNCTION_DT_INTERFACE (0x04)
+#define USB_FUNCTION_DT_ENDPOINT (0x05)
+#define USB_FUNCTION_DT_DEVICE_QUALIFIER (0x06)
+#define USB_FUNCTION_DT_OTHER_SPEED_CONFIGURATION (0x07)
+#define USB_FUNCTION_DT_INTERFACE_POWER (0x08)
+
+#define USB_FUNCTION_CF_RESERVED (0x80)
+#define USB_FUNCTION_CF_SELF (0x40)
+#define USB_FUNCTION_CF_RWUP (0x20)
+#define USB_FUNCTION_CF_NORWUP (0x00)
+#define USB_FUNCTION_EP_ERROR (0xff)
+
+#define USB_FUNCTION_EP_OUT (0x00)
+#define USB_FUNCTION_EP_IN (0x80)
+#define USB_FUNCTION_EP_CNTRL (0x00)
+#define USB_FUNCTION_EP_ISO (0x01)
+#define USB_FUNCTION_EP_BULK (0x02)
+#define USB_FUNCTION_EP_INT (0x03)
+
+#define USB_FUNCTION_STANDARD_REQUEST (0x0000u)
+#define USB_FUNCTION_CLASS_REQUEST (0x0020u)
+#define USB_FUNCTION_VENDOR_REQUEST (0x0040u)
+#define USB_FUNCTION_DEVICE_REQUEST (0x0000u)
+#define USB_FUNCTION_INTERFACE_REQUEST (0x0001u)
+#define USB_FUNCTION_ENDPOINT_REQUEST (0x0002u)
+
+#define USB_FUNCTION_GETSTATUS_BUSPOWERD (0x0000u)
+#define USB_FUNCTION_GETSTATUS_SELFPOWERD (0x0001u)
+#define USB_FUNCTION_GETSTATUS_REMOTEWAKEUP (0x0002u)
+#define USB_FUNCTION_GETSTATUS_NOTHALT (0x0000u)
+#define USB_FUNCTION_GETSTATUS_HALT (0x0001u)
+
+#define USB_FUNCTION_FEATURE_ENDPOINT_HALT (0x0000u)
+#define USB_FUNCTION_FEATURE_REMOTE_WAKEUP (0x0001u)
+#define USB_FUNCTION_FEATURE_TEST_MODE (0x0002u)
+
+#define USB_FUNCTION_bRequest (0xff00u) /* b15-8:bRequest */
+#define USB_FUNCTION_bmRequestType (0x00ffu) /* b7-0: bmRequestType */
+#define USB_FUNCTION_bmRequestTypeDir (0x0080u) /* b7 : Data transfer direction */
+#define USB_FUNCTION_bmRequestTypeType (0x0060u) /* b6-5: Type */
+#define USB_FUNCTION_bmRequestTypeRecip (0x001fu) /* b4-0: Recipient */
+
+
+/*******************************************************************************
+Variable Externs
+*******************************************************************************/
+
+
+/*******************************************************************************
+Functions Prototypes
+*******************************************************************************/
+#if 0
+void R_USB_api_function_init(uint16_t root, uint8_t int_level, uint16_t mode, uint16_t clockmode);
+uint16_t R_USB_api_function_IsConfigured(uint16_t root);
+uint16_t R_USB_api_function_CtrlReadStart(uint16_t root, uint32_t size, uint8_t *data);
+void R_USB_api_function_CtrlWriteStart(uint16_t root, uint32_t size, uint8_t *data);
+uint16_t R_USB_api_function_start_send_transfer(uint16_t root, uint16_t pipe, uint32_t size, uint8_t *data);
+uint16_t R_USB_api_function_check_pipe_status(uint16_t root, uint16_t pipe, uint32_t *size);
+void R_USB_api_function_clear_pipe_status(uint16_t root, uint16_t pipe);
+void R_USB_api_function_start_receive_transfer(uint16_t root, uint16_t pipe, uint32_t size, uint8_t *data);
+void R_USB_api_function_set_pid_buf(uint16_t root, uint16_t pipe);
+void R_USB_api_function_set_pid_nak(uint16_t root, uint16_t pipe);
+void R_USB_api_function_set_pid_stall(uint16_t root, uint16_t pipe);
+void R_USB_api_function_clear_pid_stall(uint16_t root, uint16_t pipe);
+uint16_t R_USB_api_function_get_pid(uint16_t root, uint16_t pipe);
+int32_t R_USB_api_function_check_stall(uint16_t root, uint16_t pipe);
+void R_USB_api_function_set_sqclr(uint16_t root, uint16_t pipe);
+void R_USB_api_function_set_sqset(uint16_t root, uint16_t pipe);
+void R_USB_api_function_set_csclr(uint16_t root, uint16_t pipe);
+void R_USB_api_function_set_curpipe(uint16_t root, uint16_t pipe, uint16_t fifosel, uint16_t isel, uint16_t mbw);
+void R_USB_api_function_clear_brdy_sts(uint16_t root, uint16_t pipe);
+void R_USB_api_function_clear_bemp_sts(uint16_t root, uint16_t pipe);
+void R_USB_api_function_clear_nrdy_sts(uint16_t root, uint16_t pipe);
+void R_USB_api_function_enable_brdy_int(uint16_t root, uint16_t pipe);
+void R_USB_api_function_disable_brdy_int(uint16_t root, uint16_t pipe);
+void R_USB_api_function_enable_bemp_int(uint16_t root, uint16_t pipe);
+void R_USB_api_function_disable_bemp_int(uint16_t root, uint16_t pipe);
+void R_USB_api_function_enable_nrdy_int(uint16_t root, uint16_t pipe);
+void R_USB_api_function_disable_nrdy_int(uint16_t root, uint16_t pipe);
+void R_USB_api_function_stop_transfer(uint16_t root, uint16_t pipe);
+#endif
+
+#ifdef USB0_FUNCTION_API_H
+void usb0_function_interrupt(uint32_t int_sense);
+void usb0_function_dma_interrupt_d0fifo(uint32_t int_sense);
+void usb0_function_dma_interrupt_d1fifo(uint32_t int_sense);
+
+void usb0_function_Class0(uint16_t type, uint16_t req, uint16_t value, uint16_t index, uint16_t length);
+void usb0_function_Class1(uint16_t type, uint16_t req, uint16_t value, uint16_t index, uint16_t length);
+void usb0_function_Class2(uint16_t type, uint16_t req, uint16_t value, uint16_t index, uint16_t length);
+void usb0_function_Class3(uint16_t type, uint16_t req, uint16_t value, uint16_t index, uint16_t length);
+void usb0_function_Class4(uint16_t type, uint16_t req, uint16_t value, uint16_t index, uint16_t length);
+void usb0_function_Class5(uint16_t type, uint16_t req, uint16_t value, uint16_t index, uint16_t length);
+void usb0_function_Vendor0(uint16_t type, uint16_t req, uint16_t value, uint16_t index, uint16_t length);
+void usb0_function_Vendor1(uint16_t type, uint16_t req, uint16_t value, uint16_t index, uint16_t length);
+void usb0_function_Vendor2(uint16_t type, uint16_t req, uint16_t value, uint16_t index, uint16_t length);
+void usb0_function_Vendor3(uint16_t type, uint16_t req, uint16_t value, uint16_t index, uint16_t length);
+void usb0_function_Vendor4(uint16_t type, uint16_t req, uint16_t value, uint16_t index, uint16_t length);
+void usb0_function_Vendor5(uint16_t type, uint16_t req, uint16_t value, uint16_t index, uint16_t length);
+void usb0_function_ResetDescriptor(uint16_t mode);
+
+IRQn_Type Userdef_USB_usb0_function_d0fifo_dmaintid(void);
+IRQn_Type Userdef_USB_usb0_function_d1fifo_dmaintid(void);
+void Userdef_USB_usb0_function_attach(void);
+void Userdef_USB_usb0_function_detach(void);
+void Userdef_USB_usb0_function_delay_1ms(void);
+void Userdef_USB_usb0_function_delay_xms(uint32_t msec);
+void Userdef_USB_usb0_function_delay_10us(uint32_t usec);
+void Userdef_USB_usb0_function_delay_500ns(void);
+void Userdef_USB_usb0_function_start_dma(USB_FUNCTION_DMA_t *dma, uint16_t dfacc);
+uint32_t Userdef_USB_usb0_function_stop_dma0(void);
+uint32_t Userdef_USB_usb0_function_stop_dma1(void);
+
+void usb0_function_stop_transfer(uint16_t pipe);
+void usb0_function_enable_brdy_int(uint16_t pipe);
+void usb0_function_disable_brdy_int(uint16_t pipe);
+void usb0_function_enable_bemp_int(uint16_t pipe);
+void usb0_function_disable_bemp_int(uint16_t pipe);
+void usb0_function_enable_nrdy_int(uint16_t pipe);
+void usb0_function_disable_nrdy_int(uint16_t pipe);
+#endif
+
+#ifdef USB1_FUNCTION_API_H
+void usb1_function_interrupt(uint32_t int_sense);
+void usb1_function_dma_interrupt_d0fifo(uint32_t int_sense);
+void usb1_function_dma_interrupt_d1fifo(uint32_t int_sense);
+
+void usb1_function_Class0(uint16_t type, uint16_t req, uint16_t value, uint16_t index, uint16_t length);
+void usb1_function_Class1(uint16_t type, uint16_t req, uint16_t value, uint16_t index, uint16_t length);
+void usb1_function_Class2(uint16_t type, uint16_t req, uint16_t value, uint16_t index, uint16_t length);
+void usb1_function_Class3(uint16_t type, uint16_t req, uint16_t value, uint16_t index, uint16_t length);
+void usb1_function_Class4(uint16_t type, uint16_t req, uint16_t value, uint16_t index, uint16_t length);
+void usb1_function_Class5(uint16_t type, uint16_t req, uint16_t value, uint16_t index, uint16_t length);
+void usb1_function_Vendor0(uint16_t type, uint16_t req, uint16_t value, uint16_t index, uint16_t length);
+void usb1_function_Vendor1(uint16_t type, uint16_t req, uint16_t value, uint16_t index, uint16_t length);
+void usb1_function_Vendor2(uint16_t type, uint16_t req, uint16_t value, uint16_t index, uint16_t length);
+void usb1_function_Vendor3(uint16_t type, uint16_t req, uint16_t value, uint16_t index, uint16_t length);
+void usb1_function_Vendor4(uint16_t type, uint16_t req, uint16_t value, uint16_t index, uint16_t length);
+void usb1_function_Vendor5(uint16_t type, uint16_t req, uint16_t value, uint16_t index, uint16_t length);
+void usb1_function_ResetDescriptor(uint16_t mode);
+
+IRQn_Type Userdef_USB_usb1_function_d0fifo_dmaintid(void);
+IRQn_Type Userdef_USB_usb1_function_d1fifo_dmaintid(void);
+void Userdef_USB_usb1_function_attach(void);
+void Userdef_USB_usb1_function_detach(void);
+void Userdef_USB_usb1_function_delay_1ms(void);
+void Userdef_USB_usb1_function_delay_xms(uint32_t msec);
+void Userdef_USB_usb1_function_delay_10us(uint32_t usec);
+void Userdef_USB_usb1_function_delay_500ns(void);
+void Userdef_USB_usb1_function_start_dma(USB_FUNCTION_DMA_t *dma, uint16_t dfacc);
+uint32_t Userdef_USB_usb1_function_stop_dma0(void);
+uint32_t Userdef_USB_usb1_function_stop_dma1(void);
+
+void usb1_function_stop_transfer(uint16_t pipe);
+void usb1_function_enable_brdy_int(uint16_t pipe);
+void usb1_function_disable_brdy_int(uint16_t pipe);
+void usb1_function_enable_bemp_int(uint16_t pipe);
+void usb1_function_disable_bemp_int(uint16_t pipe);
+void usb1_function_enable_nrdy_int(uint16_t pipe);
+void usb1_function_disable_nrdy_int(uint16_t pipe);
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* USB_FUNCTION_API_H */
+
+/* End of File */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/USBDevice/TARGET_RENESAS/TARGET_VK_RZ_A1H/inc/usb_function.h Fri Apr 29 01:16:25 2016 +0100 @@ -0,0 +1,143 @@ +/******************************************************************************* +* DISCLAIMER +* This software is supplied by Renesas Electronics Corporation and is only +* intended for use with Renesas products. No other uses are authorized. This +* software is owned by Renesas Electronics Corporation and is protected under +* all applicable laws, including copyright laws. +* THIS SOFTWARE IS PROVIDED "AS IS" AND RENESAS MAKES NO WARRANTIES REGARDING +* THIS SOFTWARE, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING BUT NOT +* LIMITED TO WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE +* AND NON-INFRINGEMENT. ALL SUCH WARRANTIES ARE EXPRESSLY DISCLAIMED. +* TO THE MAXIMUM EXTENT PERMITTED NOT PROHIBITED BY LAW, NEITHER RENESAS +* ELECTRONICS CORPORATION NOR ANY OF ITS AFFILIATED COMPANIES SHALL BE LIABLE +* FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR +* ANY REASON RELATED TO THIS SOFTWARE, EVEN IF RENESAS OR ITS AFFILIATES HAVE +* BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. +* Renesas reserves the right, without notice, to make changes to this software +* and to discontinue the availability of this software. By using this software, +* you agree to the additional terms and conditions found by accessing the +* following link: +* http://www.renesas.com/disclaimer +* Copyright (C) 2012 - 2014 Renesas Electronics Corporation. All rights reserved. +*******************************************************************************/ +/******************************************************************************* +* File Name : usb_function.h +* $Rev: 1116 $ +* $Date:: 2014-07-09 16:29:19 +0900#$ +* Description : RZ/A1H R7S72100 USB Sample Program +*******************************************************************************/ +#ifndef USB_FUNCTION_H +#define USB_FUNCTION_H + +/******************************************************************************* +Includes <System Includes> , "Project Includes" +*******************************************************************************/ +#include "r_typedefs.h" +#include "iodefine.h" +#include "rza_io_regrw.h" + +/******************************************************************************* +Macro definitions +*******************************************************************************/ +#define USB_FUNCTION_ALT_NO (255) +#define USB_FUNCTION_ALT_SET (0xff) + +#define USB_FUNCTION_BITUPLLE (0x0002u) +#define USB_FUNCTION_BITUCKSEL (0x0004u) +#define USB_FUNCTION_BITBWAIT (0x003fu) + +#define USB_FUNCTION_BUSWAIT_02 (0x0000u) +#define USB_FUNCTION_BUSWAIT_03 (0x0001u) +#define USB_FUNCTION_BUSWAIT_04 (0x0002u) +#define USB_FUNCTION_BUSWAIT_05 (0x0003u) +#define USB_FUNCTION_BUSWAIT_06 (0x0004u) +#define USB_FUNCTION_BUSWAIT_07 (0x0005u) +#define USB_FUNCTION_BUSWAIT_08 (0x0006u) +#define USB_FUNCTION_BUSWAIT_09 (0x0007u) +#define USB_FUNCTION_BUSWAIT_10 (0x0008u) +#define USB_FUNCTION_BUSWAIT_11 (0x0009u) +#define USB_FUNCTION_BUSWAIT_12 (0x000au) +#define USB_FUNCTION_BUSWAIT_13 (0x000bu) +#define USB_FUNCTION_BUSWAIT_14 (0x000cu) +#define USB_FUNCTION_BUSWAIT_15 (0x000du) +#define USB_FUNCTION_BUSWAIT_16 (0x000eu) +#define USB_FUNCTION_BUSWAIT_17 (0x000fu) + +#define USB_FUNCTION_BITRESUME (0x0020u) +#define USB_FUNCTION_BITUACT (0x0010u) +#define USB_FUNCTION_HSPROC (0x0004u) +#define USB_FUNCTION_HSMODE (0x0003u) +#define USB_FUNCTION_FSMODE (0x0002u) +#define USB_FUNCTION_LSMODE (0x0001u) +#define USB_FUNCTION_UNDECID (0x0000u) + +#define USB_FUNCTION_BITRCNT (0x8000u) +#define USB_FUNCTION_BITDREQE (0x1000u) +#define USB_FUNCTION_BITMBW (0x0c00u) +#define USB_FUNCTION_BITMBW_8 (0x0000u) +#define USB_FUNCTION_BITMBW_16 (0x0400u) +#define USB_FUNCTION_BITMBW_32 (0x0800u) +#define USB_FUNCTION_BITBYTE_LITTLE (0x0000u) +#define USB_FUNCTION_BITBYTE_BIG (0x0100u) +#define USB_FUNCTION_BITISEL (0x0020u) +#define USB_FUNCTION_BITCURPIPE (0x000fu) + +#define USB_FUNCTION_CFIFO_READ (0x0000u) +#define USB_FUNCTION_CFIFO_WRITE (0x0020u) + +#define USB_FUNCTION_BITBVAL (0x8000u) +#define USB_FUNCTION_BITBCLR (0x4000u) +#define USB_FUNCTION_BITFRDY (0x2000u) +#define USB_FUNCTION_BITDTLN (0x0fffu) + +#define USB_FUNCTION_BITVBSE (0x8000u) +#define USB_FUNCTION_BITRSME (0x4000u) +#define USB_FUNCTION_BITSOFE (0x2000u) +#define USB_FUNCTION_BITDVSE (0x1000u) +#define USB_FUNCTION_BITCTRE (0x0800u) +#define USB_FUNCTION_BITVBINT (0x8000u) +#define USB_FUNCTION_BITRESM (0x4000u) +#define USB_FUNCTION_BITSOFR (0x2000u) +#define USB_FUNCTION_BITDVST (0x1000u) +#define USB_FUNCTION_BITCTRT (0x0800u) + +#define USB_FUNCTION_BITBEMPE (0x0400u) +#define USB_FUNCTION_BITNRDYE (0x0200u) +#define USB_FUNCTION_BITBRDYE (0x0100u) +#define USB_FUNCTION_BITBEMP (0x0400u) +#define USB_FUNCTION_BITNRDY (0x0200u) +#define USB_FUNCTION_BITBRDY (0x0100u) + +#define USB_FUNCTION_BITDVSQ (0x0070u) +#define USB_FUNCTION_BITDVSQS (0x0030u) +#define USB_FUNCTION_DS_SPD_CNFG (0x0070u) +#define USB_FUNCTION_DS_SPD_ADDR (0x0060u) +#define USB_FUNCTION_DS_SPD_DFLT (0x0050u) +#define USB_FUNCTION_DS_SPD_POWR (0x0040u) +#define USB_FUNCTION_DS_CNFG (0x0030u) +#define USB_FUNCTION_DS_ADDS (0x0020u) +#define USB_FUNCTION_DS_DFLT (0x0010u) +#define USB_FUNCTION_DS_POWR (0x0000u) +#define USB_FUNCTION_BITVALID (0x0008u) +#define USB_FUNCTION_BITCTSQ (0x0007u) +#define USB_FUNCTION_CS_SQER (0x0006u) +#define USB_FUNCTION_CS_WRND (0x0005u) +#define USB_FUNCTION_CS_WRSS (0x0004u) +#define USB_FUNCTION_CS_WRDS (0x0003u) +#define USB_FUNCTION_CS_RDSS (0x0002u) +#define USB_FUNCTION_CS_RDDS (0x0001u) +#define USB_FUNCTION_CS_IDST (0x0000u) + +#define USB_FUNCTION_PIPExBUF (64u) + +#define USB_FUNCTION_D0FIFO (0) +#define USB_FUNCTION_D1FIFO (1) +#define USB_FUNCTION_DMA_READY (0) +#define USB_FUNCTION_DMA_BUSY (1) +#define USB_FUNCTION_DMA_BUSYEND (2) + +#define USB_FUNCTION_FIFO_USE (0x7000) + +#endif /* USB_FUNCTION_FUNCTION_H */ + +/* End of File */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/USBDevice/TARGET_RENESAS/TARGET_VK_RZ_A1H/inc/usb_function_version.h Fri Apr 29 01:16:25 2016 +0100 @@ -0,0 +1,32 @@ +/******************************************************************************* +* DISCLAIMER +* This software is supplied by Renesas Electronics Corporation and is only +* intended for use with Renesas products. No other uses are authorized. This +* software is owned by Renesas Electronics Corporation and is protected under +* all applicable laws, including copyright laws. +* THIS SOFTWARE IS PROVIDED "AS IS" AND RENESAS MAKES NO WARRANTIES REGARDING +* THIS SOFTWARE, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING BUT NOT +* LIMITED TO WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE +* AND NON-INFRINGEMENT. ALL SUCH WARRANTIES ARE EXPRESSLY DISCLAIMED. +* TO THE MAXIMUM EXTENT PERMITTED NOT PROHIBITED BY LAW, NEITHER RENESAS +* ELECTRONICS CORPORATION NOR ANY OF ITS AFFILIATED COMPANIES SHALL BE LIABLE +* FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR +* ANY REASON RELATED TO THIS SOFTWARE, EVEN IF RENESAS OR ITS AFFILIATES HAVE +* BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. +* Renesas reserves the right, without notice, to make changes to this software +* and to discontinue the availability of this software. By using this software, +* you agree to the additional terms and conditions found by accessing the +* following link: +* http://www.renesas.com/disclaimer +* Copyright (C) 2012 - 2014 Renesas Electronics Corporation. All rights reserved. +*******************************************************************************/ +/******************************************************************************* +* File Name : usb_function_version.h +* $Rev: 1116 $ +* $Date:: 2014-07-09 16:29:19 +0900#$ +* Description : RZ/A1H R7S72100 USB Sample Program +*******************************************************************************/ + +#define USB_FUNCTION_LOCAL_Rev "VER080_140709" + +/* End of File */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/USBDevice/TARGET_RENESAS/TARGET_VK_RZ_A1H/usb0/inc/usb0_function.h Fri Apr 29 01:16:25 2016 +0100
@@ -0,0 +1,171 @@
+/*******************************************************************************
+* DISCLAIMER
+* This software is supplied by Renesas Electronics Corporation and is only
+* intended for use with Renesas products. No other uses are authorized. This
+* software is owned by Renesas Electronics Corporation and is protected under
+* all applicable laws, including copyright laws.
+* THIS SOFTWARE IS PROVIDED "AS IS" AND RENESAS MAKES NO WARRANTIES REGARDING
+* THIS SOFTWARE, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING BUT NOT
+* LIMITED TO WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE
+* AND NON-INFRINGEMENT. ALL SUCH WARRANTIES ARE EXPRESSLY DISCLAIMED.
+* TO THE MAXIMUM EXTENT PERMITTED NOT PROHIBITED BY LAW, NEITHER RENESAS
+* ELECTRONICS CORPORATION NOR ANY OF ITS AFFILIATED COMPANIES SHALL BE LIABLE
+* FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR
+* ANY REASON RELATED TO THIS SOFTWARE, EVEN IF RENESAS OR ITS AFFILIATES HAVE
+* BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
+* Renesas reserves the right, without notice, to make changes to this software
+* and to discontinue the availability of this software. By using this software,
+* you agree to the additional terms and conditions found by accessing the
+* following link:
+* http://www.renesas.com/disclaimer
+* Copyright (C) 2012 - 2014 Renesas Electronics Corporation. All rights reserved.
+*******************************************************************************/
+/*******************************************************************************
+* File Name : usb0_function.h
+* $Rev: 1116 $
+* $Date:: 2014-07-09 16:29:19 +0900#$
+* Description : RZ/A1H R7S72100 USB Sample Program
+*******************************************************************************/
+#ifndef USB0_FUNCTION_H
+#define USB0_FUNCTION_H
+
+
+/*******************************************************************************
+Includes <System Includes> , "Project Includes"
+*******************************************************************************/
+#include "devdrv_usb_function_api.h"
+#include "usb_function.h"
+
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/*******************************************************************************
+Typedef definitions
+*******************************************************************************/
+
+
+/*******************************************************************************
+Macro definitions
+*******************************************************************************/
+
+
+/*******************************************************************************
+Imported global variables and functions (from other files)
+*******************************************************************************/
+extern const uint16_t g_usb0_function_bit_set[];
+extern uint32_t g_usb0_function_data_count[USB_FUNCTION_MAX_PIPE_NO + 1];
+extern uint8_t *g_usb0_function_data_pointer[USB_FUNCTION_MAX_PIPE_NO + 1];
+
+extern uint16_t g_usb0_function_PipeIgnore[];
+extern uint16_t g_usb0_function_PipeTbl[];
+extern uint16_t g_usb0_function_pipe_status[];
+extern uint32_t g_usb0_function_PipeDataSize[];
+
+extern USB_FUNCTION_DMA_t g_usb0_function_DmaInfo[];
+extern uint16_t g_usb0_function_DmaPipe[];
+extern uint16_t g_usb0_function_DmaBval[];
+extern uint16_t g_usb0_function_DmaStatus[];
+
+extern uint16_t g_usb0_function_CtrZeroLengthFlag;
+
+extern uint16_t g_usb0_function_ConfigNum;
+extern uint16_t g_usb0_function_Alternate[USB_FUNCTION_ALT_NO];
+extern uint16_t g_usb0_function_RemoteWakeupFlag;
+extern uint16_t g_usb0_function_TestModeFlag;
+extern uint16_t g_usb0_function_TestModeSelectors;
+
+extern uint16_t g_usb0_function_ReqType;
+extern uint16_t g_usb0_function_ReqTypeType;
+extern uint16_t g_usb0_function_ReqTypeRecip;
+extern uint16_t g_usb0_function_ReqRequest;
+extern uint16_t g_usb0_function_ReqValue;
+extern uint16_t g_usb0_function_ReqIndex;
+extern uint16_t g_usb0_function_ReqLength;
+
+extern uint16_t g_usb0_function_EPTableIndex[USB_FUNCTION_MAX_EP_NO + 1];
+
+extern uint16_t g_usb0_function_pipecfg[USB_FUNCTION_MAX_PIPE_NO + 1];
+extern uint16_t g_usb0_function_pipebuf[USB_FUNCTION_MAX_PIPE_NO + 1];
+extern uint16_t g_usb0_function_pipemaxp[USB_FUNCTION_MAX_PIPE_NO + 1];
+extern uint16_t g_usb0_function_pipeperi[USB_FUNCTION_MAX_PIPE_NO + 1];
+
+
+/*******************************************************************************
+Exported global variables and functions (to be accessed by other files)
+*******************************************************************************/
+/* ==== common ==== */
+void usb0_function_dma_stop_d0(uint16_t pipe, uint32_t remain);
+void usb0_function_dma_stop_d1(uint16_t pipe, uint32_t remain);
+uint16_t usb0_function_is_hispeed(void);
+uint16_t usb0_function_is_hispeed_enable(void);
+uint16_t usb0_function_start_send_transfer(uint16_t pipe, uint32_t size, uint8_t *data);
+uint16_t usb0_function_write_buffer(uint16_t pipe);
+uint16_t usb0_function_write_buffer_c(uint16_t pipe);
+uint16_t usb0_function_write_buffer_d0(uint16_t pipe);
+uint16_t usb0_function_write_buffer_d1(uint16_t pipe);
+void usb0_function_start_receive_transfer(uint16_t pipe, uint32_t size, uint8_t *data);
+uint16_t usb0_function_read_buffer(uint16_t pipe);
+uint16_t usb0_function_read_buffer_c(uint16_t pipe);
+uint16_t usb0_function_read_buffer_d0(uint16_t pipe);
+uint16_t usb0_function_read_buffer_d1(uint16_t pipe);
+uint16_t usb0_function_change_fifo_port(uint16_t pipe, uint16_t fifosel, uint16_t isel, uint16_t mbw);
+void usb0_function_set_curpipe(uint16_t pipe, uint16_t fifosel, uint16_t isel, uint16_t mbw);
+void usb0_function_set_curpipe2(uint16_t pipe, uint16_t fifosel, uint16_t isel, uint16_t mbw, uint16_t dfacc);
+uint16_t usb0_function_get_mbw(uint32_t trncount, uint32_t dtptr);
+uint16_t usb0_function_read_dma(uint16_t pipe);
+void usb0_function_brdy_int(uint16_t status, uint16_t int_enb);
+void usb0_function_nrdy_int(uint16_t status, uint16_t int_enb);
+void usb0_function_bemp_int(uint16_t status, uint16_t int_enb);
+void usb0_function_setting_interrupt(uint8_t level);
+void usb0_function_reset_module(uint16_t clockmode);
+uint16_t usb0_function_get_buf_size(uint16_t pipe);
+uint16_t usb0_function_get_mxps(uint16_t pipe);
+void usb0_function_clear_brdy_sts(uint16_t pipe);
+void usb0_function_clear_bemp_sts(uint16_t pipe);
+void usb0_function_clear_nrdy_sts(uint16_t pipe);
+void usb0_function_set_pid_buf(uint16_t pipe);
+void usb0_function_set_pid_nak(uint16_t pipe);
+void usb0_function_set_pid_stall(uint16_t pipe);
+void usb0_function_clear_pid_stall(uint16_t pipe);
+uint16_t usb0_function_get_pid(uint16_t pipe);
+void usb0_function_set_sqclr(uint16_t pipe);
+void usb0_function_set_sqset(uint16_t pipe);
+void usb0_function_set_csclr(uint16_t pipe);
+void usb0_function_aclrm(uint16_t pipe);
+void usb0_function_set_aclrm(uint16_t pipe);
+void usb0_function_clr_aclrm(uint16_t pipe);
+uint16_t usb0_function_get_sqmon(uint16_t pipe);
+uint16_t usb0_function_get_inbuf(uint16_t pipe);
+
+/* ==== function ==== */
+void usb0_function_init_status(void);
+void usb0_function_InitModule(uint16_t mode);
+uint16_t usb0_function_CheckVBUStaus(void);
+void usb0_function_USB_FUNCTION_Attach(void);
+void usb0_function_USB_FUNCTION_Detach(void);
+void usb0_function_USB_FUNCTION_BusReset(void);
+void usb0_function_USB_FUNCTION_Resume(void);
+void usb0_function_USB_FUNCTION_Suspend(void);
+void usb0_function_USB_FUNCTION_TestMode(void);
+void usb0_function_ResetDCP(void);
+void usb0_function_ResetEP(uint16_t num);
+uint16_t usb0_function_EpToPipe(uint16_t ep);
+void usb0_function_InitEPTable(uint16_t Con_Num, uint16_t Int_Num, uint16_t Alt_Num);
+uint16_t usb0_function_GetConfigNum(void);
+uint16_t usb0_function_GetAltNum(uint16_t Con_Num, uint16_t Int_Num);
+uint16_t usb0_function_CheckRemoteWakeup(void);
+void usb0_function_clear_alt(void);
+void usb0_function_clear_pipe_tbl(void);
+void usb0_function_clear_ep_table_index(void);
+uint16_t usb0_function_GetInterfaceNum(uint16_t num);
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* USB0_FUNCTION_H */
+
+/* End of File */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/USBDevice/TARGET_RENESAS/TARGET_VK_RZ_A1H/usb0/inc/usb0_function_api.h Fri Apr 29 01:16:25 2016 +0100
@@ -0,0 +1,104 @@
+/*******************************************************************************
+* DISCLAIMER
+* This software is supplied by Renesas Electronics Corporation and is only
+* intended for use with Renesas products. No other uses are authorized. This
+* software is owned by Renesas Electronics Corporation and is protected under
+* all applicable laws, including copyright laws.
+* THIS SOFTWARE IS PROVIDED "AS IS" AND RENESAS MAKES NO WARRANTIES REGARDING
+* THIS SOFTWARE, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING BUT NOT
+* LIMITED TO WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE
+* AND NON-INFRINGEMENT. ALL SUCH WARRANTIES ARE EXPRESSLY DISCLAIMED.
+* TO THE MAXIMUM EXTENT PERMITTED NOT PROHIBITED BY LAW, NEITHER RENESAS
+* ELECTRONICS CORPORATION NOR ANY OF ITS AFFILIATED COMPANIES SHALL BE LIABLE
+* FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR
+* ANY REASON RELATED TO THIS SOFTWARE, EVEN IF RENESAS OR ITS AFFILIATES HAVE
+* BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
+* Renesas reserves the right, without notice, to make changes to this software
+* and to discontinue the availability of this software. By using this software,
+* you agree to the additional terms and conditions found by accessing the
+* following link:
+* http://www.renesas.com/disclaimer
+* Copyright (C) 2012 - 2014 Renesas Electronics Corporation. All rights reserved.
+*******************************************************************************/
+/*******************************************************************************
+* File Name : usb0_function_api.h
+* $Rev: 1116 $
+* $Date:: 2014-07-09 16:29:19 +0900#$
+* Description : RZ/A1H R7S72100 USB Sample Program
+*******************************************************************************/
+#ifndef USB0_FUNCTION_API_H
+#define USB0_FUNCTION_API_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/*******************************************************************************
+Includes <System Includes> , "Project Includes"
+*******************************************************************************/
+
+
+/*******************************************************************************
+Typedef definitions
+*******************************************************************************/
+
+
+/*******************************************************************************
+Macro definitions
+*******************************************************************************/
+
+
+/*******************************************************************************
+Variable Externs
+*******************************************************************************/
+
+
+/*******************************************************************************
+Exported global variables and functions (to be accessed by other files)
+*******************************************************************************/
+void usb0_api_function_init(uint8_t int_level, uint16_t mode, uint16_t clockmode);
+uint16_t usb0_api_function_IsConfigured(void);
+uint16_t usb0_function_GetDeviceState(void);
+uint16_t usb0_api_function_CtrlReadStart(uint32_t size, uint8_t *data);
+void usb0_api_function_CtrlWriteStart(uint32_t size, uint8_t *data);
+uint16_t usb0_api_function_start_send_transfer(uint16_t pipe, uint32_t size, uint8_t *data);
+uint16_t usb0_api_function_check_pipe_status(uint16_t pipe, uint32_t *size);
+void usb0_api_function_clear_pipe_status(uint16_t pipe);
+void usb0_api_function_start_receive_transfer(uint16_t pipe, uint32_t size, uint8_t *data);
+void usb0_api_function_set_pid_buf(uint16_t pipe);
+void usb0_api_function_set_pid_nak(uint16_t pipe);
+void usb0_api_function_set_pid_stall(uint16_t pipe);
+void usb0_api_function_clear_pid_stall(uint16_t pipe);
+uint16_t usb0_api_function_get_pid(uint16_t pipe);
+int32_t usb0_api_function_check_stall(uint16_t pipe);
+void usb0_api_function_set_sqclr(uint16_t pipe);
+void usb0_api_function_set_sqset(uint16_t pipe);
+void usb0_api_function_set_csclr(uint16_t pipe);
+void usb0_api_function_set_curpipe(uint16_t pipe, uint16_t fifosel, uint16_t isel, uint16_t mbw);
+void usb0_api_function_clear_brdy_sts(uint16_t pipe);
+void usb0_api_function_clear_bemp_sts(uint16_t pipe);
+void usb0_api_function_clear_nrdy_sts(uint16_t pipe);
+
+void usb0_function_ClearFeature(uint16_t type, uint16_t value, uint16_t index, uint16_t length);
+void usb0_function_SetFeature(uint16_t type, uint16_t value, uint16_t index, uint16_t length);
+void usb0_function_SetAddress(uint16_t type, uint16_t value, uint16_t index, uint16_t length);
+void usb0_function_SetDescriptor(uint16_t type, uint16_t value, uint16_t index, uint16_t length);
+void usb0_function_SetConfiguration(uint16_t type, uint16_t value, uint16_t index, uint16_t length);
+void usb0_function_SetInterface(uint16_t type, uint16_t value, uint16_t index, uint16_t length);
+void usb0_function_SynchFrame(uint16_t type, uint16_t value, uint16_t index, uint16_t length);
+void usb0_function_GetStatus(uint16_t type, uint16_t value, uint16_t index, uint16_t length);
+void usb0_function_GetDescriptor(uint16_t type, uint16_t value, uint16_t index, uint16_t length);
+void usb0_function_GetConfiguration(uint16_t type, uint16_t value, uint16_t index, uint16_t length);
+void usb0_function_GetInterface(uint16_t type, uint16_t value, uint16_t index, uint16_t length);
+void usb0_function_Resrv_0(uint16_t type, uint16_t value, uint16_t index, uint16_t length);
+void usb0_function_Resrv_123(uint16_t type, uint16_t value, uint16_t index, uint16_t length);
+void usb0_function_Resrv_4(uint16_t type, uint16_t value, uint16_t index, uint16_t length);
+void usb0_function_Resrv_5(uint16_t type, uint16_t value, uint16_t index, uint16_t length);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* USB0_FUNCTION_API_H */
+
+/* End of File */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/USBDevice/TARGET_RENESAS/TARGET_VK_RZ_A1H/usb0/inc/usb0_function_dmacdrv.h Fri Apr 29 01:16:25 2016 +0100
@@ -0,0 +1,142 @@
+/*******************************************************************************
+* DISCLAIMER
+* This software is supplied by Renesas Electronics Corporation and is only
+* intended for use with Renesas products. No other uses are authorized. This
+* software is owned by Renesas Electronics Corporation and is protected under
+* all applicable laws, including copyright laws.
+* THIS SOFTWARE IS PROVIDED "AS IS" AND RENESAS MAKES NO WARRANTIES REGARDING
+* THIS SOFTWARE, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING BUT NOT
+* LIMITED TO WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE
+* AND NON-INFRINGEMENT. ALL SUCH WARRANTIES ARE EXPRESSLY DISCLAIMED.
+* TO THE MAXIMUM EXTENT PERMITTED NOT PROHIBITED BY LAW, NEITHER RENESAS
+* ELECTRONICS CORPORATION NOR ANY OF ITS AFFILIATED COMPANIES SHALL BE LIABLE
+* FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR
+* ANY REASON RELATED TO THIS SOFTWARE, EVEN IF RENESAS OR ITS AFFILIATES HAVE
+* BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
+* Renesas reserves the right, without notice, to make changes to this software
+* and to discontinue the availability of this software. By using this software,
+* you agree to the additional terms and conditions found by accessing the
+* following link:
+* http://www.renesas.com/disclaimer
+* Copyright (C) 2012 - 2014 Renesas Electronics Corporation. All rights reserved.
+*******************************************************************************/
+/*******************************************************************************
+* File Name : usb0_function_dmacdrv.h
+* $Rev: 1116 $
+* $Date:: 2014-07-09 16:29:19 +0900#$
+* Description : RZ/A1H R7S72100 USB Sample Program
+*******************************************************************************/
+#ifndef USB0_FUNCTION_DMACDRV_H
+#define USB0_FUNCTION_DMACDRV_H
+
+
+/*******************************************************************************
+Includes <System Includes> , "Project Includes"
+*******************************************************************************/
+
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/*******************************************************************************
+Typedef definitions
+*******************************************************************************/
+typedef struct dmac_transinfo
+{
+ uint32_t src_addr; /* Transfer source address */
+ uint32_t dst_addr; /* Transfer destination address */
+ uint32_t count; /* Transfer byte count */
+ uint32_t src_size; /* Transfer source data size */
+ uint32_t dst_size; /* Transfer destination data size */
+ uint32_t saddr_dir; /* Transfer source address direction */
+ uint32_t daddr_dir; /* Transfer destination address direction */
+} dmac_transinfo_t;
+
+
+/*******************************************************************************
+Macro definitions
+*******************************************************************************/
+/* ==== Transfer specification of the sample program ==== */
+#define DMAC_SAMPLE_SINGLE (0) /* Single transfer */
+#define DMAC_SAMPLE_CONTINUATION (1) /* Continuous transfer (use REN bit) */
+
+/* ==== DMA modes ==== */
+#define DMAC_MODE_REGISTER (0) /* Register mode */
+#define DMAC_MODE_LINK (1) /* Link mode */
+
+/* ==== Transfer requests ==== */
+#define DMAC_REQ_MODE_EXT (0) /* External request */
+#define DMAC_REQ_MODE_PERI (1) /* On-chip peripheral module request */
+#define DMAC_REQ_MODE_SOFT (2) /* Auto-request (request by software) */
+
+/* ==== DMAC transfer sizes ==== */
+#define DMAC_TRANS_SIZE_8 (0) /* 8 bits */
+#define DMAC_TRANS_SIZE_16 (1) /* 16 bits */
+#define DMAC_TRANS_SIZE_32 (2) /* 32 bits */
+#define DMAC_TRANS_SIZE_64 (3) /* 64 bits */
+#define DMAC_TRANS_SIZE_128 (4) /* 128 bits */
+#define DMAC_TRANS_SIZE_256 (5) /* 256 bits */
+#define DMAC_TRANS_SIZE_512 (6) /* 512 bits */
+#define DMAC_TRANS_SIZE_1024 (7) /* 1024 bits */
+
+/* ==== Address increment for transferring ==== */
+#define DMAC_TRANS_ADR_NO_INC (1) /* Not increment */
+#define DMAC_TRANS_ADR_INC (0) /* Increment */
+
+/* ==== Method for detecting DMA request ==== */
+#define DMAC_REQ_DET_FALL (0) /* Falling edge detection */
+#define DMAC_REQ_DET_RISE (1) /* Rising edge detection */
+#define DMAC_REQ_DET_LOW (2) /* Low level detection */
+#define DMAC_REQ_DET_HIGH (3) /* High level detection */
+
+/* ==== Request Direction ==== */
+#define DMAC_REQ_DIR_SRC (0) /* DMAREQ is the source/ DMAACK is active when reading */
+#define DMAC_REQ_DIR_DST (1) /* DMAREQ is the destination/ DMAACK is active when writing */
+
+/* ==== Descriptors ==== */
+#define DMAC_DESC_HEADER (0) /* Header */
+#define DMAC_DESC_SRC_ADDR (1) /* Source Address */
+#define DMAC_DESC_DST_ADDR (2) /* Destination Address */
+#define DMAC_DESC_COUNT (3) /* Transaction Byte */
+#define DMAC_DESC_CHCFG (4) /* Channel Confg */
+#define DMAC_DESC_CHITVL (5) /* Channel Interval */
+#define DMAC_DESC_CHEXT (6) /* Channel Extension */
+#define DMAC_DESC_LINK_ADDR (7) /* Link Address */
+
+/* ==== On-chip peripheral module requests ===== */
+typedef enum dmac_request_factor
+{
+ DMAC_REQ_USB0_DMA0_TX, /* USB_0 channel 0 transmit FIFO empty */
+ DMAC_REQ_USB0_DMA0_RX, /* USB_0 channel 0 receive FIFO full */
+ DMAC_REQ_USB0_DMA1_TX, /* USB_0 channel 1 transmit FIFO empty */
+ DMAC_REQ_USB0_DMA1_RX, /* USB_0 channel 1 receive FIFO full */
+ DMAC_REQ_USB1_DMA0_TX, /* USB_1 channel 0 transmit FIFO empty */
+ DMAC_REQ_USB1_DMA0_RX, /* USB_1 channel 0 receive FIFO full */
+ DMAC_REQ_USB1_DMA1_TX, /* USB_1 channel 1 transmit FIFO empty */
+ DMAC_REQ_USB1_DMA1_RX, /* USB_1 channel 1 receive FIFO full */
+} dmac_request_factor_t;
+
+
+/*******************************************************************************
+Exported global variables and functions (to be accessed by other files)
+*******************************************************************************/
+void usb0_function_DMAC1_PeriReqInit(const dmac_transinfo_t *trans_info, uint32_t dmamode, uint32_t continuation,
+ uint32_t request_factor, uint32_t req_direction);
+int32_t usb0_function_DMAC1_Open(uint32_t req);
+void usb0_function_DMAC1_Close(uint32_t *remain);
+void usb0_function_DMAC1_Load_Set(uint32_t src_addr, uint32_t dst_addr, uint32_t count);
+
+void usb0_function_DMAC2_PeriReqInit(const dmac_transinfo_t *trans_info, uint32_t dmamode, uint32_t continuation,
+ uint32_t request_factor, uint32_t req_direction);
+int32_t usb0_function_DMAC2_Open(uint32_t req);
+void usb0_function_DMAC2_Close(uint32_t *remain);
+void usb0_function_DMAC2_Load_Set(uint32_t src_addr, uint32_t dst_addr, uint32_t count);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* USB0_FUNCTION_DMACDRV_H */
+
+/* End of File */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/USBDevice/TARGET_RENESAS/TARGET_VK_RZ_A1H/usb0/src/common/usb0_function_dataio.c Fri Apr 29 01:16:25 2016 +0100
@@ -0,0 +1,2933 @@
+/*******************************************************************************
+* DISCLAIMER
+* This software is supplied by Renesas Electronics Corporation and is only
+* intended for use with Renesas products. No other uses are authorized. This
+* software is owned by Renesas Electronics Corporation and is protected under
+* all applicable laws, including copyright laws.
+* THIS SOFTWARE IS PROVIDED "AS IS" AND RENESAS MAKES NO WARRANTIES REGARDING
+* THIS SOFTWARE, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING BUT NOT
+* LIMITED TO WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE
+* AND NON-INFRINGEMENT. ALL SUCH WARRANTIES ARE EXPRESSLY DISCLAIMED.
+* TO THE MAXIMUM EXTENT PERMITTED NOT PROHIBITED BY LAW, NEITHER RENESAS
+* ELECTRONICS CORPORATION NOR ANY OF ITS AFFILIATED COMPANIES SHALL BE LIABLE
+* FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR
+* ANY REASON RELATED TO THIS SOFTWARE, EVEN IF RENESAS OR ITS AFFILIATES HAVE
+* BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
+* Renesas reserves the right, without notice, to make changes to this software
+* and to discontinue the availability of this software. By using this software,
+* you agree to the additional terms and conditions found by accessing the
+* following link:
+* http://www.renesas.com/disclaimer
+* Copyright (C) 2012 - 2014 Renesas Electronics Corporation. All rights reserved.
+*******************************************************************************/
+/*******************************************************************************
+* File Name : usb0_function_dataio.c
+* $Rev: 1116 $
+* $Date:: 2014-07-09 16:29:19 +0900#$
+* Device(s) : RZ/A1H
+* Tool-Chain :
+* OS : None
+* H/W Platform :
+* Description : RZ/A1H R7S72100 USB Sample Program
+* Operation :
+* Limitations :
+*******************************************************************************/
+
+
+/*******************************************************************************
+Includes <System Includes> , "Project Includes"
+*******************************************************************************/
+#include "usb0_function.h"
+
+
+/*******************************************************************************
+Typedef definitions
+*******************************************************************************/
+
+
+/*******************************************************************************
+Macro definitions
+*******************************************************************************/
+
+
+/*******************************************************************************
+Imported global variables and functions (from other files)
+*******************************************************************************/
+
+
+/*******************************************************************************
+Exported global variables and functions (to be accessed by other files)
+*******************************************************************************/
+
+
+/*******************************************************************************
+Private global variables and functions
+*******************************************************************************/
+static uint16_t g_usb0_function_mbw[(USB_FUNCTION_MAX_PIPE_NO + 1)];
+
+static void usb0_function_start_receive_trns_c(uint16_t pipe, uint32_t size, uint8_t *data);
+static void usb0_function_start_receive_trns_d0(uint16_t pipe, uint32_t size, uint8_t *data);
+static void usb0_function_start_receive_trns_d1(uint16_t pipe, uint32_t size, uint8_t *data);
+static void usb0_function_start_receive_dma_d0(uint16_t pipe, uint32_t size, uint8_t *data);
+static void usb0_function_start_receive_dma_d1(uint16_t pipe, uint32_t size, uint8_t *data);
+static uint16_t usb0_function_read_dma_d0(uint16_t pipe);
+static uint16_t usb0_function_read_dma_d1(uint16_t pipe);
+static uint16_t usb0_function_write_dma_d0(uint16_t pipe);
+static uint16_t usb0_function_write_dma_d1(uint16_t pipe);
+
+static void usb0_function_read_c_fifo(uint16_t pipe, uint16_t count);
+static void usb0_function_write_c_fifo(uint16_t Pipe, uint16_t count);
+static void usb0_function_read_d0_fifo(uint16_t pipe, uint16_t count);
+static void usb0_function_write_d0_fifo(uint16_t pipe, uint16_t count);
+static void usb0_function_read_d1_fifo(uint16_t pipe, uint16_t count);
+static void usb0_function_write_d1_fifo(uint16_t pipe, uint16_t count);
+
+static void usb0_function_clear_transaction_counter(uint16_t pipe);
+static void usb0_function_set_transaction_counter(uint16_t pipe, uint32_t count);
+
+static uint32_t usb0_function_com_get_dmasize(uint32_t trncount, uint32_t dtptr);
+
+static uint16_t usb0_function_set_dfacc_d0(uint16_t mbw, uint32_t count);
+static uint16_t usb0_function_set_dfacc_d1(uint16_t mbw, uint32_t count);
+
+
+/*******************************************************************************
+* Function Name: usb0_function_start_send_transfer
+* Description : Starts the USB data communication using pipe specified by the argument.
+* Arguments : uint16_t pipe ; Pipe Number
+* : uint32_t size ; Data Size
+* : uint8_t *data ; Data Address
+* Return Value : DEVDRV_USBF_WRITEEND ; Write end
+* : DEVDRV_USBF_WRITESHRT ; short data
+* : DEVDRV_USBF_WRITING ; Continue of data write
+* : DEVDRV_USBF_WRITEDMA ; Write DMA
+* : DEVDRV_USBF_FIFOERROR ; FIFO status
+*******************************************************************************/
+uint16_t usb0_function_start_send_transfer (uint16_t pipe, uint32_t size, uint8_t * data)
+{
+ uint16_t status;
+ uint16_t usefifo;
+ uint16_t mbw;
+
+ g_usb0_function_data_count[pipe] = size;
+ g_usb0_function_data_pointer[pipe] = (uint8_t *)data;
+ g_usb0_function_pipe_status[pipe] = DEVDRV_USBF_PIPE_WAIT;
+
+ usb0_function_clear_bemp_sts(pipe);
+ usb0_function_clear_brdy_sts(pipe);
+ usb0_function_clear_nrdy_sts(pipe);
+
+ mbw = usb0_function_get_mbw(size, (uint32_t)data);
+
+ usefifo = (uint16_t)(g_usb0_function_PipeTbl[pipe] & USB_FUNCTION_FIFO_USE);
+
+ switch (usefifo)
+ {
+ case USB_FUNCTION_D0FIFO_USE:
+ case USB_FUNCTION_D0FIFO_DMA:
+ usefifo = USB_FUNCTION_D0USE;
+ break;
+
+ case USB_FUNCTION_D1FIFO_USE:
+ case USB_FUNCTION_D1FIFO_DMA:
+ usefifo = USB_FUNCTION_D1USE;
+ break;
+
+ default:
+ usefifo = USB_FUNCTION_CUSE;
+ break;
+ };
+
+ usb0_function_set_curpipe(USB_FUNCTION_PIPE0, usefifo, DEVDRV_USBF_NO, mbw);
+
+ usb0_function_clear_transaction_counter(pipe);
+
+ usb0_function_aclrm(pipe);
+
+ status = usb0_function_write_buffer(pipe);
+
+ if (status != DEVDRV_USBF_FIFOERROR)
+ {
+ usb0_function_set_pid_buf(pipe);
+ }
+
+ return status;
+}
+
+/*******************************************************************************
+* Function Name: usb0_function_write_buffer
+* Description : Writes data in the buffer allocated in the pipe specified by
+* : the argument. The FIFO for using is set in the pipe definition table.
+* Arguments : uint16_t pipe ; Pipe Number
+* Return Value : DEVDRV_USBF_WRITEEND ; Write end
+* : DEVDRV_USBF_WRITESHRT ; short data
+* : DEVDRV_USBF_WRITING ; Continue of data write
+* : DEVDRV_USBF_WRITEDMA ; Write DMA
+* : DEVDRV_USBF_FIFOERROR ; FIFO status
+*******************************************************************************/
+uint16_t usb0_function_write_buffer (uint16_t pipe)
+{
+ uint16_t status;
+ uint16_t usefifo;
+
+ g_usb0_function_PipeIgnore[pipe] = 0;
+ usefifo = (uint16_t)(g_usb0_function_PipeTbl[pipe] & USB_FUNCTION_FIFO_USE);
+
+ switch (usefifo)
+ {
+ case USB_FUNCTION_D0FIFO_USE:
+ status = usb0_function_write_buffer_d0(pipe);
+ break;
+
+ case USB_FUNCTION_D1FIFO_USE:
+ status = usb0_function_write_buffer_d1(pipe);
+ break;
+
+ case USB_FUNCTION_D0FIFO_DMA:
+ status = usb0_function_write_dma_d0(pipe);
+ break;
+
+ case USB_FUNCTION_D1FIFO_DMA:
+ status = usb0_function_write_dma_d1(pipe);
+ break;
+
+ default:
+ status = usb0_function_write_buffer_c(pipe);
+ break;
+ };
+
+ switch (status)
+ {
+ case DEVDRV_USBF_WRITING: /* Continue of data write */
+ usb0_function_enable_nrdy_int(pipe); /* Error (NORES or STALL) */
+ usb0_function_enable_brdy_int(pipe); /* Enable Ready Interrupt */
+ break;
+
+ case DEVDRV_USBF_WRITEEND: /* End of data write */
+ case DEVDRV_USBF_WRITESHRT: /* End of data write */
+ usb0_function_disable_brdy_int(pipe); /* Disable Ready Interrupt */
+ usb0_function_clear_nrdy_sts(pipe);
+ usb0_function_enable_nrdy_int(pipe); /* Error (NORES or STALL) */
+ /* for last transfer */
+ usb0_function_enable_bemp_int(pipe); /* Enable Empty Interrupt */
+ break;
+
+ case DEVDRV_USBF_WRITEDMA: /* DMA write */
+ usb0_function_clear_nrdy_sts(pipe);
+ usb0_function_enable_nrdy_int(pipe); /* Error (NORES or STALL) */
+ break;
+
+ case DEVDRV_USBF_FIFOERROR: /* FIFO access status */
+ default:
+ usb0_function_disable_brdy_int(pipe); /* Disable Ready Interrupt */
+ usb0_function_disable_bemp_int(pipe); /* Disable Empty Interrupt */
+ g_usb0_function_pipe_status[pipe] = DEVDRV_USBF_FIFOERROR;
+ break;
+ }
+
+ return status; /* End or Err or Continue */
+}
+
+/*******************************************************************************
+* Function Name: usb0_function_write_buffer_c
+* Description : Writes data in the buffer allocated in the pipe specified in
+* : the argument. Writes data by CPU transfer using CFIFO.
+* Arguments : uint16_t pipe ; Pipe Number
+* Return Value : DEVDRV_USBF_WRITEEND ; Write end
+* : DEVDRV_USBF_WRITESHRT ; short data
+* : DEVDRV_USBF_WRITING ; Continue of data write
+* : DEVDRV_USBF_WRITEDMA ; Write DMA
+* : DEVDRV_USBF_FIFOERROR ; FIFO status
+*******************************************************************************/
+uint16_t usb0_function_write_buffer_c (uint16_t pipe)
+{
+ uint32_t count;
+ uint16_t size;
+ uint16_t buffer;
+ uint16_t mxps;
+ uint16_t status;
+ uint16_t mbw;
+
+ if (g_usb0_function_CtrZeroLengthFlag == 1)
+ {
+ g_usb0_function_CtrZeroLengthFlag = 0; /* Zero Length Packet Flag CLR */
+ return DEVDRV_USBF_WRITEEND;
+ }
+
+ mbw = usb0_function_get_mbw(g_usb0_function_data_count[pipe], (uint32_t)g_usb0_function_data_pointer[pipe]);
+ if (pipe == USB_FUNCTION_PIPE0)
+ {
+ buffer = usb0_function_change_fifo_port(pipe, USB_FUNCTION_CUSE, USB_FUNCTION_CFIFO_WRITE, mbw);
+ }
+ else
+ {
+ buffer = usb0_function_change_fifo_port(pipe, USB_FUNCTION_CUSE, DEVDRV_USBF_NO, mbw);
+ }
+
+ if (buffer == DEVDRV_USBF_FIFOERROR) /* FIFO access status */
+ {
+ return DEVDRV_USBF_FIFOERROR;
+ }
+
+ size = usb0_function_get_buf_size(pipe); /* Data buffer size */
+ mxps = usb0_function_get_mxps(pipe); /* Max Packet Size */
+
+ if (g_usb0_function_data_count[pipe] <= (uint32_t)size)
+ {
+ status = DEVDRV_USBF_WRITEEND; /* write continues */
+ count = g_usb0_function_data_count[pipe];
+
+ if (count == 0)
+ {
+ status = DEVDRV_USBF_WRITESHRT; /* Null Packet is end of write */
+ }
+
+ if ((count % mxps) != 0)
+ {
+ status = DEVDRV_USBF_WRITESHRT; /* Short Packet is end of write */
+ }
+ }
+ else
+ {
+ status = DEVDRV_USBF_WRITING; /* write continues */
+ count = (uint32_t)size;
+ }
+
+ usb0_function_write_c_fifo(pipe, (uint16_t)count);
+
+ if (g_usb0_function_data_count[pipe] < (uint32_t)size)
+ {
+ g_usb0_function_data_count[pipe] = 0;
+
+ if (RZA_IO_RegRead_16(&USB200.CFIFOCTR, USB_CFIFOCTR_BVAL_SHIFT, USB_CFIFOCTR_BVAL) == 0)
+ {
+ USB200.CFIFOCTR = USB_FUNCTION_BITBVAL; /* Short Packet */
+ g_usb0_function_CtrZeroLengthFlag = 1; /* Zero Length Packet Flag */
+ }
+ }
+ else
+ {
+ g_usb0_function_data_count[pipe] -= count;
+ }
+
+ return status; /* End or Err or Continue */
+}
+
+/*******************************************************************************
+* Function Name: usb0_function_write_buffer_d0
+* Description : Writes data in the buffer allocated in the pipe specified in the argument.
+* : Writes data by CPU transfer using D0FIFO.
+* Arguments : uint16_t pipe ; Pipe Number
+* Return Value : DEVDRV_USBF_WRITEEND ; Write end
+* : DEVDRV_USBF_WRITESHRT ; short data
+* : DEVDRV_USBF_WRITING ; Continue of data write
+* : DEVDRV_USBF_WRITEDMA ; Write DMA
+* : DEVDRV_USBF_FIFOERROR ; FIFO status
+*******************************************************************************/
+uint16_t usb0_function_write_buffer_d0 (uint16_t pipe)
+{
+ uint32_t count;
+ uint16_t size;
+ uint16_t buffer;
+ uint16_t mxps;
+ uint16_t status;
+ uint16_t mbw;
+
+ mbw = usb0_function_get_mbw(g_usb0_function_data_count[pipe], (uint32_t)g_usb0_function_data_pointer[pipe]);
+ buffer = usb0_function_change_fifo_port(pipe, USB_FUNCTION_D0USE, DEVDRV_USBF_NO, mbw);
+ if (buffer == DEVDRV_USBF_FIFOERROR) /* FIFO access status */
+ {
+ return DEVDRV_USBF_FIFOERROR;
+ }
+
+ size = usb0_function_get_buf_size(pipe); /* Data buffer size */
+ mxps = usb0_function_get_mxps(pipe); /* Max Packet Size */
+
+ if (g_usb0_function_data_count[pipe] <= (uint32_t)size)
+ {
+ status = DEVDRV_USBF_WRITEEND; /* write continues */
+ count = g_usb0_function_data_count[pipe];
+
+ if (count == 0)
+ {
+ status = DEVDRV_USBF_WRITESHRT; /* Null Packet is end of write */
+ }
+
+ if ((count % mxps) != 0)
+ {
+ status = DEVDRV_USBF_WRITESHRT; /* Short Packet is end of write */
+ }
+ }
+ else
+ {
+ status = DEVDRV_USBF_WRITING; /* write continues */
+ count = (uint32_t)size;
+ }
+
+ usb0_function_write_d0_fifo(pipe, (uint16_t)count);
+
+ if (g_usb0_function_data_count[pipe] < (uint32_t)size)
+ {
+ g_usb0_function_data_count[pipe] = 0;
+ if (RZA_IO_RegRead_16(&USB200.D0FIFOCTR, USB_DnFIFOCTR_BVAL_SHIFT, USB_DnFIFOCTR_BVAL) == 0)
+ {
+ USB200.D0FIFOCTR = USB_FUNCTION_BITBVAL; /* Short Packet */
+ }
+ }
+ else
+ {
+ g_usb0_function_data_count[pipe] -= count;
+ }
+
+ return status; /* End or Err or Continue */
+}
+
+/*******************************************************************************
+* Function Name: usb0_function_write_buffer_d1
+* Description : Writes data in the buffer allocated in the pipe specified in the argument.
+* : Writes data by CPU transfer using D1FIFO.
+* Arguments : uint16_t pipe ; Pipe Number
+* Return Value : DEVDRV_USBF_WRITEEND ; Write end
+* : DEVDRV_USBF_WRITESHRT ; short data
+* : DEVDRV_USBF_WRITING ; Continue of data write
+* : DEVDRV_USBF_WRITEDMA ; Write DMA
+* : DEVDRV_USBF_FIFOERROR ; FIFO status
+*******************************************************************************/
+uint16_t usb0_function_write_buffer_d1 (uint16_t pipe)
+{
+ uint32_t count;
+ uint16_t size;
+ uint16_t buffer;
+ uint16_t mxps;
+ uint16_t status;
+ uint16_t mbw;
+
+ mbw = usb0_function_get_mbw(g_usb0_function_data_count[pipe], (uint32_t)g_usb0_function_data_pointer[pipe]);
+ buffer = usb0_function_change_fifo_port(pipe, USB_FUNCTION_D1USE, DEVDRV_USBF_NO, mbw);
+
+ if (buffer == DEVDRV_USBF_FIFOERROR) /* FIFO access status */
+ {
+ return DEVDRV_USBF_FIFOERROR;
+ }
+
+ size = usb0_function_get_buf_size(pipe); /* Data buffer size */
+ mxps = usb0_function_get_mxps(pipe); /* Max Packet Size */
+
+ if (g_usb0_function_data_count[pipe] <= (uint32_t)size)
+ {
+ status = DEVDRV_USBF_WRITEEND; /* write continues */
+ count = g_usb0_function_data_count[pipe];
+
+ if (count == 0)
+ {
+ status = DEVDRV_USBF_WRITESHRT; /* Null Packet is end of write */
+ }
+
+ if ((count % mxps) != 0)
+ {
+ status = DEVDRV_USBF_WRITESHRT; /* Short Packet is end of write */
+ }
+ }
+ else
+ {
+ status = DEVDRV_USBF_WRITING; /* write continues */
+ count = (uint32_t)size;
+ }
+
+ usb0_function_write_d1_fifo(pipe, (uint16_t)count);
+
+ if (g_usb0_function_data_count[pipe] < (uint32_t)size)
+ {
+ g_usb0_function_data_count[pipe] = 0;
+
+ if (RZA_IO_RegRead_16(&USB200.D1FIFOCTR, USB_DnFIFOCTR_BVAL_SHIFT, USB_DnFIFOCTR_BVAL) == 0)
+ {
+ USB200.D1FIFOCTR = USB_FUNCTION_BITBVAL; /* Short Packet */
+ }
+ }
+ else
+ {
+ g_usb0_function_data_count[pipe] -= count;
+ }
+
+ return status; /* End or Err or Continue */
+}
+
+/*******************************************************************************
+* Function Name: usb0_function_write_dma_d0
+* Description : Writes data in the buffer allocated in the pipe specified in the argument.
+* : Writes data by DMA transfer using D0FIFO.
+* : The DMA-ch for using is specified by Userdef_USB_usb0_function_start_dma().
+* Arguments : uint16_t pipe ; Pipe Number
+* Return Value : DEVDRV_USBF_WRITEEND : Write end
+* : DEVDRV_USBF_WRITESHRT : short data
+* : DEVDRV_USBF_WRITING : Continue of data write
+* : DEVDRV_USBF_WRITEDMA : Write DMA
+* : DEVDRV_USBF_FIFOERROR : FIFO status
+*******************************************************************************/
+static uint16_t usb0_function_write_dma_d0 (uint16_t pipe)
+{
+ uint32_t count;
+ uint16_t size;
+ uint16_t buffer;
+ uint16_t status;
+ uint16_t mbw;
+ uint16_t dfacc = 0;
+
+ mbw = usb0_function_get_mbw(g_usb0_function_data_count[pipe], (uint32_t)g_usb0_function_data_pointer[pipe]);
+ buffer = usb0_function_change_fifo_port(pipe, USB_FUNCTION_D0DMA, DEVDRV_USBF_NO, mbw);
+
+ if (buffer == DEVDRV_USBF_FIFOERROR) /* FIFO access status */
+ {
+ return DEVDRV_USBF_FIFOERROR;
+ }
+
+ size = usb0_function_get_buf_size(pipe); /* Data buffer size */
+ count = g_usb0_function_data_count[pipe];
+
+ if (count != 0)
+ {
+ g_usb0_function_DmaPipe[USB_FUNCTION_D0FIFO] = pipe;
+
+ if ((count % size) != 0)
+ {
+ g_usb0_function_DmaBval[USB_FUNCTION_D0FIFO] = 1;
+ }
+ else
+ {
+ g_usb0_function_DmaBval[USB_FUNCTION_D0FIFO] = 0;
+ }
+
+ dfacc = usb0_function_set_dfacc_d0(mbw, count);
+
+ if (mbw == USB_FUNCTION_BITMBW_32)
+ {
+ g_usb0_function_DmaInfo[USB_FUNCTION_D0FIFO].size = 2; /* 32bit transfer */
+ }
+ else if (mbw == USB_FUNCTION_BITMBW_16)
+ {
+ g_usb0_function_DmaInfo[USB_FUNCTION_D0FIFO].size = 1; /* 16bit transfer */
+ }
+ else
+ {
+ g_usb0_function_DmaInfo[USB_FUNCTION_D0FIFO].size = 0; /* 8bit transfer */
+ }
+
+ g_usb0_function_DmaInfo[USB_FUNCTION_D0FIFO].fifo = USB_FUNCTION_D0FIFO_DMA;
+ g_usb0_function_DmaInfo[USB_FUNCTION_D0FIFO].dir = USB_FUNCTION_BUF2FIFO;
+ g_usb0_function_DmaInfo[USB_FUNCTION_D0FIFO].buffer = (uint32_t)g_usb0_function_data_pointer[pipe];
+ g_usb0_function_DmaInfo[USB_FUNCTION_D0FIFO].bytes = count;
+
+ Userdef_USB_usb0_function_start_dma(&g_usb0_function_DmaInfo[USB_FUNCTION_D0FIFO], dfacc);
+
+ usb0_function_set_curpipe2(pipe, USB_FUNCTION_D0DMA, DEVDRV_USBF_NO, mbw, dfacc);
+
+ RZA_IO_RegWrite_16(&USB200.D0FIFOSEL, 1, USB_DnFIFOSEL_DREQE_SHIFT, USB_DnFIFOSEL_DREQE);
+
+ g_usb0_function_data_count[pipe] = 0;
+ g_usb0_function_data_pointer[pipe] += count;
+ status = DEVDRV_USBF_WRITEDMA; /* DMA write */
+ }
+ else
+ {
+ if (RZA_IO_RegRead_16(&USB200.D0FIFOCTR, USB_DnFIFOCTR_BVAL_SHIFT, USB_DnFIFOCTR_BVAL) == 0)
+ {
+ RZA_IO_RegWrite_16(&USB200.D0FIFOCTR, 1, USB_DnFIFOCTR_BVAL_SHIFT, USB_DnFIFOCTR_BVAL); /* Short Packet */
+ }
+ status = DEVDRV_USBF_WRITESHRT; /* Short Packet is end of write */
+ }
+
+ return status; /* End or Err or Continue */
+}
+
+/*******************************************************************************
+* Function Name: usb0_function_write_dma_d1
+* Description : Writes data in the buffer allocated in the pipe specified in the argument.
+* : Writes data by DMA transfer using D1FIFO.
+* : The DMA-ch for using is specified by Userdef_USB_usb0_function_start_dma().
+* Arguments : uint16_t pipe ; Pipe Number
+* Return Value : DEVDRV_USBF_WRITEEND : Write end
+* : DEVDRV_USBF_WRITESHRT : short data
+* : DEVDRV_USBF_WRITING : Continue of data write
+* : DEVDRV_USBF_WRITEDMA : Write DMA
+* : DEVDRV_USBF_FIFOERROR : FIFO status
+*******************************************************************************/
+static uint16_t usb0_function_write_dma_d1 (uint16_t pipe)
+{
+ uint32_t count;
+ uint16_t size;
+ uint16_t buffer;
+ uint16_t status;
+ uint16_t mbw;
+ uint16_t dfacc=0;
+
+ mbw = usb0_function_get_mbw(g_usb0_function_data_count[pipe], (uint32_t)g_usb0_function_data_pointer[pipe]);
+ buffer = usb0_function_change_fifo_port(pipe, USB_FUNCTION_D1DMA, DEVDRV_USBF_NO, mbw);
+
+ if (buffer == DEVDRV_USBF_FIFOERROR) /* FIFO access status */
+ {
+ return DEVDRV_USBF_FIFOERROR;
+ }
+
+ size = usb0_function_get_buf_size(pipe); /* Data buffer size */
+ count = g_usb0_function_data_count[pipe];
+
+ if (count != 0)
+ {
+ g_usb0_function_DmaPipe[USB_FUNCTION_D1FIFO] = pipe;
+ if ((count % size) != 0)
+ {
+ g_usb0_function_DmaBval[USB_FUNCTION_D1FIFO] = 1;
+ }
+ else
+ {
+ g_usb0_function_DmaBval[USB_FUNCTION_D1FIFO] = 0;
+ }
+
+ dfacc = usb0_function_set_dfacc_d1(mbw, count);
+
+ if (mbw == USB_FUNCTION_BITMBW_32)
+ {
+ g_usb0_function_DmaInfo[USB_FUNCTION_D1FIFO].size = 2; /* 32bit transfer */
+ }
+ else if (mbw == USB_FUNCTION_BITMBW_16)
+ {
+ g_usb0_function_DmaInfo[USB_FUNCTION_D1FIFO].size = 1; /* 16bit transfer */
+ }
+ else
+ {
+ g_usb0_function_DmaInfo[USB_FUNCTION_D1FIFO].size = 0; /* 8bit transfer */
+ }
+
+ g_usb0_function_DmaInfo[USB_FUNCTION_D1FIFO].fifo = USB_FUNCTION_D1FIFO_DMA;
+ g_usb0_function_DmaInfo[USB_FUNCTION_D1FIFO].dir = USB_FUNCTION_BUF2FIFO;
+ g_usb0_function_DmaInfo[USB_FUNCTION_D1FIFO].buffer = (uint32_t)g_usb0_function_data_pointer[pipe];
+ g_usb0_function_DmaInfo[USB_FUNCTION_D1FIFO].bytes = count;
+
+ Userdef_USB_usb0_function_start_dma(&g_usb0_function_DmaInfo[USB_FUNCTION_D1FIFO], dfacc);
+
+ usb0_function_set_curpipe2(pipe, USB_FUNCTION_D1DMA, DEVDRV_USBF_NO, mbw, dfacc);
+
+ RZA_IO_RegWrite_16(&USB200.D1FIFOSEL, 1, USB_DnFIFOSEL_DREQE_SHIFT, USB_DnFIFOSEL_DREQE);
+
+ g_usb0_function_data_count[pipe] = 0;
+ g_usb0_function_data_pointer[pipe] += count;
+
+ status = DEVDRV_USBF_WRITEDMA; /* DMA write */
+ }
+ else
+ {
+ if (RZA_IO_RegRead_16(&USB200.D1FIFOCTR, USB_DnFIFOCTR_BVAL_SHIFT, USB_DnFIFOCTR_BVAL) == 0)
+ {
+ RZA_IO_RegWrite_16(&USB200.D1FIFOCTR, 1, USB_DnFIFOCTR_BVAL_SHIFT, USB_DnFIFOCTR_BVAL); /* Short Packet */
+ }
+ status = DEVDRV_USBF_WRITESHRT; /* Short Packet is end of write */
+ }
+
+ return status; /* End or Err or Continue */
+}
+
+/*******************************************************************************
+* Function Name: usb0_function_start_receive_transfer
+* Description : Starts USB data reception using the pipe specified in the argument.
+* : The FIFO for using is set in the pipe definition table.
+* Arguments : uint16_t pipe ; Pipe Number
+* : uint32_t size ; Data Size
+* : uint8_t *data ; Data Address
+* Return Value : none
+*******************************************************************************/
+void usb0_function_start_receive_transfer (uint16_t pipe, uint32_t size, uint8_t * data)
+{
+ uint16_t usefifo;
+
+ usb0_function_clear_bemp_sts(pipe);
+ usb0_function_clear_brdy_sts(pipe);
+ usb0_function_clear_nrdy_sts(pipe);
+
+ usefifo = (uint16_t)(g_usb0_function_PipeTbl[pipe] & USB_FUNCTION_FIFO_USE);
+
+ switch (usefifo)
+ {
+ case USB_FUNCTION_D0FIFO_USE:
+ usb0_function_start_receive_trns_d0(pipe, size, data);
+ break;
+
+ case USB_FUNCTION_D1FIFO_USE:
+ usb0_function_start_receive_trns_d1(pipe, size, data);
+ break;
+
+ case USB_FUNCTION_D0FIFO_DMA:
+ usb0_function_start_receive_dma_d0(pipe, size, data);
+ break;
+
+ case USB_FUNCTION_D1FIFO_DMA:
+ usb0_function_start_receive_dma_d1(pipe, size, data);
+ break;
+
+ default:
+ usb0_function_start_receive_trns_c(pipe, size, data);
+ break;
+ }
+}
+
+/*******************************************************************************
+* Function Name: usb0_function_start_receive_trns_c
+* Description : Reads data from the buffer allocated in the pipe specified in the argument.
+* : Reads data by CPU transfer using CFIFO.
+* : When storing data in the buffer allocated in the pipe specified in the
+* : argument, BRDY interrupt is generated to read data
+* : in the interrupt.
+* Arguments : uint16_t pipe ; Pipe Number
+* : uint32_t size ; Data Size
+* : uint8_t *data ; Data Address
+* Return Value : none
+*******************************************************************************/
+static void usb0_function_start_receive_trns_c (uint16_t pipe, uint32_t size, uint8_t * data)
+{
+ uint16_t mbw;
+
+ usb0_function_set_pid_nak(pipe);
+ g_usb0_function_data_count[pipe] = size;
+ g_usb0_function_data_pointer[pipe] = (uint8_t *)data;
+ g_usb0_function_PipeIgnore[pipe] = 0;
+
+ g_usb0_function_PipeDataSize[pipe] = size;
+ g_usb0_function_pipe_status[pipe] = DEVDRV_USBF_PIPE_WAIT;
+
+ mbw = usb0_function_get_mbw(size, (uint32_t)data);
+ usb0_function_set_curpipe(USB_FUNCTION_PIPE0, USB_FUNCTION_CUSE, USB_FUNCTION_CFIFO_READ, mbw);
+ USB200.CFIFOCTR = USB_FUNCTION_BITBCLR;
+
+ usb0_function_set_transaction_counter(pipe, size);
+
+ usb0_function_aclrm(pipe);
+
+ usb0_function_enable_nrdy_int(pipe);
+ usb0_function_enable_brdy_int(pipe);
+
+ usb0_function_set_pid_buf(pipe);
+}
+
+/*******************************************************************************
+* Function Name: usb0_function_start_receive_trns_d0
+* Description : Reads data from the buffer allocated in the pipe specified in the argument.
+* : Reads data by CPU transfer using D0FIFO.
+* : This function does not read data from the buffer.
+* : When storing data in the buffer allocated in the pipe specified
+* : in the argument, BRDY interrupt is generated to read data in the
+* : interrupt.
+* Arguments : uint16_t pipe ; Pipe Number
+* : uint32_t size ; Data Size
+* : uint8_t *data ; Data Address
+* Return Value : none
+*******************************************************************************/
+static void usb0_function_start_receive_trns_d0 (uint16_t pipe, uint32_t size, uint8_t * data)
+{
+ uint16_t mbw;
+
+ usb0_function_set_pid_nak(pipe);
+ g_usb0_function_data_count[pipe] = size;
+ g_usb0_function_data_pointer[pipe] = (uint8_t *)data;
+ g_usb0_function_PipeIgnore[pipe] = 0;
+
+ g_usb0_function_PipeDataSize[pipe] = size;
+ g_usb0_function_pipe_status[pipe] = DEVDRV_USBF_PIPE_WAIT;
+
+ mbw = usb0_function_get_mbw(size, (uint32_t)data);
+ usb0_function_set_curpipe(USB_FUNCTION_PIPE0, USB_FUNCTION_D0USE, DEVDRV_USBF_NO, mbw);
+
+ usb0_function_set_transaction_counter(pipe, size);
+
+ usb0_function_aclrm(pipe);
+
+ usb0_function_enable_nrdy_int(pipe);
+ usb0_function_enable_brdy_int(pipe);
+
+ usb0_function_set_pid_buf(pipe);
+}
+
+/*******************************************************************************
+* Function Name: usb0_function_start_receive_trns_d1
+* Description : Reads data from the buffer allocated in the pipe specified in the argument.
+* : Reads data by CPU transfer using D1FIFO.
+* : This function does not read data from the buffer.
+* : When storing data in the buffer allocated in the pipe specified
+* : in the argument, BRDY interrupt is generated to read data.
+* Arguments : uint16_t pipe ; Pipe Number
+* : uint32_t size ; Data Size
+* : uint8_t *data ; Data Address
+* Return Value : none
+*******************************************************************************/
+static void usb0_function_start_receive_trns_d1 (uint16_t pipe, uint32_t size, uint8_t * data)
+{
+ uint16_t mbw;
+
+ usb0_function_set_pid_nak(pipe);
+ g_usb0_function_data_count[pipe] = size;
+ g_usb0_function_data_pointer[pipe] = (uint8_t *)data;
+ g_usb0_function_PipeIgnore[pipe] = 0;
+
+ g_usb0_function_PipeDataSize[pipe] = size;
+ g_usb0_function_pipe_status[pipe] = DEVDRV_USBF_PIPE_WAIT;
+
+ mbw = usb0_function_get_mbw(size, (uint32_t)data);
+ usb0_function_set_curpipe(USB_FUNCTION_PIPE0, USB_FUNCTION_D1USE, DEVDRV_USBF_NO, mbw);
+
+ usb0_function_set_transaction_counter(pipe, size);
+
+ usb0_function_aclrm(pipe);
+
+ usb0_function_enable_nrdy_int(pipe);
+ usb0_function_enable_brdy_int(pipe);
+
+ usb0_function_set_pid_buf(pipe);
+}
+
+/*******************************************************************************
+* Function Name: usb0_function_start_receive_dma_d0
+* Description : Reads data from the buffer allocated in the pipe specified in the argument.
+* : Reads data by DMA transfer using D0FIFO.
+* : This function does not read data from the buffer.
+* : When storing data in the buffer allocated in the pipe specified
+* : in the argument, delivered read request to DMAC to read data from
+* : the buffer by DMAC.
+* Arguments : uint16_t pipe ; Pipe Number
+* : uint32_t size ; Data Size
+* : uint8_t *data ; Data Address
+* Return Value : none
+*******************************************************************************/
+static void usb0_function_start_receive_dma_d0 (uint16_t pipe, uint32_t size, uint8_t * data)
+{
+ uint16_t mbw;
+
+ usb0_function_set_pid_nak(pipe);
+ g_usb0_function_data_count[pipe] = size;
+ g_usb0_function_data_pointer[pipe] = (uint8_t *)data;
+ g_usb0_function_PipeIgnore[pipe] = 0;
+
+ g_usb0_function_PipeDataSize[pipe] = 0;
+ g_usb0_function_pipe_status[pipe] = DEVDRV_USBF_PIPE_WAIT;
+
+ mbw = usb0_function_get_mbw(size, (uint32_t)data);
+ usb0_function_set_curpipe(USB_FUNCTION_PIPE0, USB_FUNCTION_D0USE, DEVDRV_USBF_NO, mbw);
+
+ usb0_function_set_transaction_counter(pipe, size);
+
+ usb0_function_aclrm(pipe);
+
+ if (RZA_IO_RegRead_16(&g_usb0_function_pipecfg[pipe], USB_PIPECFG_BFRE_SHIFT, USB_PIPECFG_BFRE) == 1)
+ {
+ usb0_function_read_dma(pipe);
+
+ usb0_function_enable_nrdy_int(pipe);
+ usb0_function_enable_brdy_int(pipe);
+ }
+ else
+ {
+ usb0_function_enable_nrdy_int(pipe);
+ usb0_function_enable_brdy_int(pipe);
+ }
+
+ usb0_function_set_pid_buf(pipe);
+}
+
+/*******************************************************************************
+* Function Name: usb0_function_start_receive_dma_d1
+* Description : Read data from the buffer allocated in the pipe specified in the argument.
+* : Reads data by DMA transfer using D0FIFO.
+* : This function does not read data from the buffer.
+* : When storing data in the buffer allocated in the pipe specified
+* : in the argument, delivered read request to DMAC to read data from
+* : the buffer by DMAC.
+* Arguments : uint16_t pipe ; Pipe Number
+* : uint32_t size ; Data Size
+* : uint8_t *data ; Data Address
+* Return Value : none
+*******************************************************************************/
+static void usb0_function_start_receive_dma_d1 (uint16_t pipe, uint32_t size, uint8_t * data)
+{
+ uint16_t mbw;
+
+ usb0_function_set_pid_nak(pipe);
+ g_usb0_function_data_count[pipe] = size;
+ g_usb0_function_data_pointer[pipe] = (uint8_t *)data;
+ g_usb0_function_PipeIgnore[pipe] = 0;
+
+ g_usb0_function_PipeDataSize[pipe] = 0;
+ g_usb0_function_pipe_status[pipe] = DEVDRV_USBF_PIPE_WAIT;
+
+ mbw = usb0_function_get_mbw(size, (uint32_t)data);
+ usb0_function_set_curpipe(USB_FUNCTION_PIPE0, USB_FUNCTION_D1USE, DEVDRV_USBF_NO, mbw);
+
+ usb0_function_set_transaction_counter(pipe, size);
+
+ usb0_function_aclrm(pipe);
+
+ if (RZA_IO_RegRead_16(&g_usb0_function_pipecfg[pipe], USB_PIPECFG_BFRE_SHIFT, USB_PIPECFG_BFRE) == 1)
+ {
+ usb0_function_read_dma(pipe);
+
+ usb0_function_enable_nrdy_int(pipe);
+ usb0_function_enable_brdy_int(pipe);
+ }
+ else
+ {
+ usb0_function_enable_nrdy_int(pipe);
+ usb0_function_enable_brdy_int(pipe);
+ }
+
+ usb0_function_set_pid_buf(pipe);
+}
+
+/*******************************************************************************
+* Function Name: usb0_function_read_buffer
+* Description : Reads data from the buffer allocated in the pipe specified
+* : in the argument.
+* : Uses FIF0 set in the pipe definition table.
+* Arguments : uint16_t pipe ; Pipe Number
+* Return Value : USB_FUNCTION_READEND ; Read end
+* : USB_FUNCTION_READSHRT ; short data
+* : USB_FUNCTION_READING ; Continue of data read
+* : USB_FUNCTION_READOVER ; buffer over
+* : DEVDRV_USBF_FIFOERROR ; FIFO status
+*******************************************************************************/
+uint16_t usb0_function_read_buffer (uint16_t pipe)
+{
+ uint16_t status;
+
+ g_usb0_function_PipeIgnore[pipe] = 0;
+
+ if ((g_usb0_function_PipeTbl[pipe] & USB_FUNCTION_FIFO_USE) == USB_FUNCTION_D0FIFO_USE)
+ {
+ status = usb0_function_read_buffer_d0(pipe);
+ }
+ else if ((g_usb0_function_PipeTbl[pipe] & USB_FUNCTION_FIFO_USE) == USB_FUNCTION_D1FIFO_USE)
+ {
+ status = usb0_function_read_buffer_d1(pipe);
+ }
+ else
+ {
+ status = usb0_function_read_buffer_c(pipe);
+ }
+
+ switch (status)
+ {
+ case USB_FUNCTION_READING: /* Continue of data read */
+ break;
+
+ case USB_FUNCTION_READEND: /* End of data read */
+ case USB_FUNCTION_READSHRT: /* End of data read */
+ usb0_function_disable_brdy_int(pipe);
+ g_usb0_function_PipeDataSize[pipe] -= g_usb0_function_data_count[pipe];
+ g_usb0_function_pipe_status[pipe] = DEVDRV_USBF_PIPE_DONE;
+ break;
+
+ case USB_FUNCTION_READOVER: /* buffer over */
+ if ((g_usb0_function_PipeTbl[pipe] & USB_FUNCTION_FIFO_USE) == USB_FUNCTION_D0FIFO_USE)
+ {
+ USB200.D0FIFOCTR = USB_FUNCTION_BITBCLR; /* Clear BCLR */
+ }
+ else if ((g_usb0_function_PipeTbl[pipe] & USB_FUNCTION_FIFO_USE) == USB_FUNCTION_D1FIFO_USE)
+ {
+ USB200.D1FIFOCTR = USB_FUNCTION_BITBCLR; /* Clear BCLR */
+ }
+ else
+ {
+ USB200.CFIFOCTR = USB_FUNCTION_BITBCLR; /* Clear BCLR */
+ }
+ usb0_function_disable_brdy_int(pipe); /* Disable Ready Interrupt */
+ g_usb0_function_PipeDataSize[pipe] -= g_usb0_function_data_count[pipe];
+ g_usb0_function_pipe_status[pipe] = DEVDRV_USBF_FIFOERROR;
+ break;
+
+ case DEVDRV_USBF_FIFOERROR: /* FIFO access status */
+ default:
+ usb0_function_disable_brdy_int(pipe); /* Disable Ready Interrupt */
+ g_usb0_function_pipe_status[pipe] = DEVDRV_USBF_FIFOERROR;
+ break;
+ }
+
+ return status; /* End or Err or Continue */
+}
+
+/*******************************************************************************
+* Function Name: usb0_function_read_buffer_c
+* Description : Reads data from the buffer allocated in the pipe specified in the argument.
+* : Reads data by CPU transfer using CFIFO.
+* Arguments : uint16_t pipe ; Pipe Number
+* Return Value : USB_FUNCTION_READEND ; Read end
+* : USB_FUNCTION_READSHRT ; short data
+* : USB_FUNCTION_READING ; Continue of data read
+* : USB_FUNCTION_READOVER ; buffer over
+* : DEVDRV_USBF_FIFOERROR ; FIFO status
+*******************************************************************************/
+uint16_t usb0_function_read_buffer_c (uint16_t pipe)
+{
+ uint32_t count;
+ uint32_t dtln;
+ uint16_t buffer;
+ uint16_t mxps;
+ uint16_t status;
+ uint16_t mbw;
+
+ mbw = usb0_function_get_mbw(g_usb0_function_data_count[pipe], (uint32_t)g_usb0_function_data_pointer[pipe]);
+ buffer = usb0_function_change_fifo_port(pipe, USB_FUNCTION_CUSE, DEVDRV_USBF_NO, mbw);
+
+ if (buffer == DEVDRV_USBF_FIFOERROR) /* FIFO access status */
+ {
+ return DEVDRV_USBF_FIFOERROR;
+ }
+
+ dtln = (uint32_t)(buffer & USB_FUNCTION_BITDTLN);
+ mxps = usb0_function_get_mxps(pipe); /* Max Packet Size */
+
+ if (g_usb0_function_data_count[pipe] < dtln) /* Buffer Over ? */
+ {
+ status = USB_FUNCTION_READOVER;
+ usb0_function_set_pid_nak(pipe); /* Set NAK */
+ count = g_usb0_function_data_count[pipe];
+ }
+ else if (g_usb0_function_data_count[pipe] == dtln) /* just Receive Size */
+ {
+ status = USB_FUNCTION_READEND;
+ usb0_function_set_pid_nak(pipe); /* Set NAK */
+ count = dtln;
+
+ if (count == 0)
+ {
+ status = USB_FUNCTION_READSHRT; /* Null Packet receive */
+ }
+
+ if ((count % mxps) != 0)
+ {
+ status = USB_FUNCTION_READSHRT; /* Short Packet receive */
+ }
+ }
+ else /* continue Receive data */
+ {
+ status = USB_FUNCTION_READING;
+ count = dtln;
+
+ if (count == 0)
+ {
+ status = USB_FUNCTION_READSHRT; /* Null Packet receive */
+ usb0_function_set_pid_nak(pipe); /* Set NAK */
+ }
+
+ if ((count % mxps) != 0)
+ {
+ status = USB_FUNCTION_READSHRT; /* Short Packet receive */
+ usb0_function_set_pid_nak(pipe); /* Set NAK */
+ }
+ }
+
+ if (count == 0) /* 0 length packet */
+ {
+ USB200.CFIFOCTR = USB_FUNCTION_BITBCLR; /* Clear BCLR */
+ }
+ else
+ {
+ usb0_function_read_c_fifo(pipe, (uint16_t)count);
+ }
+
+ g_usb0_function_data_count[pipe] -= count;
+
+ return status; /* End or Err or Continue */
+}
+
+/*******************************************************************************
+* Function Name: usb0_function_read_buffer_d0
+* Description : Reads data from the buffer allocated in the pipe specified in
+* : the argument.
+* : Reads data by CPU transfer using D0FIFO.
+* Arguments : uint16_t pipe ; Pipe Number
+* Return Value : USB_FUNCTION_READEND ; Read end
+* : USB_FUNCTION_READSHRT ; short data
+* : USB_FUNCTION_READING ; Continue of data read
+* : USB_FUNCTION_READOVER ; buffer over
+* : DEVDRV_USBF_FIFOERROR ; FIFO status
+*******************************************************************************/
+uint16_t usb0_function_read_buffer_d0 (uint16_t pipe)
+{
+ uint32_t count;
+ uint32_t dtln;
+ uint16_t buffer;
+ uint16_t mxps;
+ uint16_t status;
+ uint16_t mbw;
+ uint16_t pipebuf_size;
+
+ mbw = usb0_function_get_mbw(g_usb0_function_data_count[pipe], (uint32_t)g_usb0_function_data_pointer[pipe]);
+ buffer = usb0_function_change_fifo_port(pipe, USB_FUNCTION_D0USE, DEVDRV_USBF_NO, mbw);
+
+ if (buffer == DEVDRV_USBF_FIFOERROR) /* FIFO access status */
+ {
+ return DEVDRV_USBF_FIFOERROR;
+ }
+
+ dtln = (uint32_t)(buffer & USB_FUNCTION_BITDTLN);
+ mxps = usb0_function_get_mxps(pipe); /* Max Packet Size */
+
+ if (g_usb0_function_data_count[pipe] < dtln) /* Buffer Over ? */
+ {
+ status = USB_FUNCTION_READOVER;
+ usb0_function_set_pid_nak(pipe); /* Set NAK */
+ count = g_usb0_function_data_count[pipe];
+ }
+ else if (g_usb0_function_data_count[pipe] == dtln) /* just Receive Size */
+ {
+ status = USB_FUNCTION_READEND;
+ usb0_function_set_pid_nak(pipe); /* Set NAK */
+ count = dtln;
+
+ if (count == 0)
+ {
+ status = USB_FUNCTION_READSHRT; /* Null Packet receive */
+ }
+
+ if ((count % mxps) != 0)
+ {
+ status = USB_FUNCTION_READSHRT; /* Short Packet receive */
+ }
+ }
+ else /* continue Receive data */
+ {
+ status = USB_FUNCTION_READING;
+ count = dtln;
+
+ if (count == 0)
+ {
+ status = USB_FUNCTION_READSHRT; /* Null Packet receive */
+ usb0_function_set_pid_nak(pipe); /* Set NAK */
+ }
+
+ if ((count % mxps) != 0)
+ {
+ status = USB_FUNCTION_READSHRT; /* Short Packet receive */
+ usb0_function_set_pid_nak(pipe); /* Set NAK */
+ }
+ else
+ {
+ pipebuf_size = usb0_function_get_buf_size(pipe); /* Data buffer size */
+
+ if (count != pipebuf_size)
+ {
+ status = USB_FUNCTION_READSHRT; /* Short Packet receive */
+ usb0_function_set_pid_nak(pipe); /* Set NAK */
+ }
+ }
+ }
+
+ if (count == 0) /* 0 length packet */
+ {
+ USB200.D0FIFOCTR = USB_FUNCTION_BITBCLR; /* Clear BCLR */
+ }
+ else
+ {
+ usb0_function_read_d0_fifo(pipe, (uint16_t)count);
+ }
+
+ g_usb0_function_data_count[pipe] -= count;
+
+ return status; /* End or Err or Continue */
+}
+
+/*******************************************************************************
+* Function Name: usb0_function_read_buffer_d1
+* Description : Reads data from the buffer allocated in the pipe specified
+* : in the argument.
+* : Reads data by CPU transfer using D1FIFO.
+* Arguments : uint16_t pipe ; Pipe Number
+* Return Value : USB_FUNCTION_READEND ; Read end
+* : USB_FUNCTION_READSHRT ; short data
+* : USB_FUNCTION_READING ; Continue of data read
+* : USB_FUNCTION_READOVER ; buffer over
+* : DEVDRV_USBF_FIFOERROR ; FIFO status
+*******************************************************************************/
+uint16_t usb0_function_read_buffer_d1 (uint16_t pipe)
+{
+ uint32_t count;
+ uint32_t dtln;
+ uint16_t buffer;
+ uint16_t mxps;
+ uint16_t status;
+ uint16_t mbw;
+ uint16_t pipebuf_size;
+
+ mbw = usb0_function_get_mbw(g_usb0_function_data_count[pipe], (uint32_t)g_usb0_function_data_pointer[pipe]);
+ buffer = usb0_function_change_fifo_port(pipe, USB_FUNCTION_D1USE, DEVDRV_USBF_NO, mbw);
+
+ if (buffer == DEVDRV_USBF_FIFOERROR) /* FIFO access status */
+ {
+ return DEVDRV_USBF_FIFOERROR;
+ }
+
+ dtln = (uint32_t)(buffer & USB_FUNCTION_BITDTLN);
+ mxps = usb0_function_get_mxps(pipe); /* Max Packet Size */
+
+ if (g_usb0_function_data_count[pipe] < dtln) /* Buffer Over ? */
+ {
+ status = USB_FUNCTION_READOVER;
+ usb0_function_set_pid_nak(pipe); /* Set NAK */
+ count = g_usb0_function_data_count[pipe];
+ }
+ else if (g_usb0_function_data_count[pipe] == dtln) /* just Receive Size */
+ {
+ status = USB_FUNCTION_READEND;
+ usb0_function_set_pid_nak(pipe); /* Set NAK */
+ count = dtln;
+ if (count == 0)
+ {
+ status = USB_FUNCTION_READSHRT; /* Null Packet receive */
+ }
+
+ if ((count % mxps) != 0)
+ {
+ status = USB_FUNCTION_READSHRT; /* Short Packet receive */
+ }
+ }
+ else /* continue Receive data */
+ {
+ status = USB_FUNCTION_READING;
+ count = dtln;
+ if (count == 0)
+ {
+ status = USB_FUNCTION_READSHRT; /* Null Packet receive */
+ usb0_function_set_pid_nak(pipe); /* Set NAK */
+ }
+
+ if ((count % mxps) != 0)
+ {
+ status = USB_FUNCTION_READSHRT; /* Short Packet receive */
+ usb0_function_set_pid_nak(pipe); /* Set NAK */
+ }
+ else
+ {
+ pipebuf_size = usb0_function_get_buf_size(pipe); /* Data buffer size */
+
+ if (count != pipebuf_size)
+ {
+ status = USB_FUNCTION_READSHRT; /* Short Packet receive */
+ usb0_function_set_pid_nak(pipe); /* Set NAK */
+ }
+ }
+ }
+
+ if (count == 0) /* 0 length packet */
+ {
+ USB200.D1FIFOCTR = USB_FUNCTION_BITBCLR; /* Clear BCLR */
+ }
+ else
+ {
+ usb0_function_read_d1_fifo(pipe, (uint16_t)count);
+ }
+
+ g_usb0_function_data_count[pipe] -= count;
+
+ return status; /* End or Err or Continue */
+}
+
+/*******************************************************************************
+* Function Name: usb0_function_read_dma
+* Description : Reads data from the buffer allocated in the pipe specified
+* : in the argument.
+* : Reads data by DMA transfer using D0FIFO or D1FIFO.
+* Arguments : uint16_t pipe ; Pipe Number
+* Return Value : USB_FUNCTION_READEND ; Read end
+* : USB_FUNCTION_READSHRT ; short data
+* : USB_FUNCTION_READING ; Continue of data read
+* : USB_FUNCTION_READOVER ; buffer over
+* : DEVDRV_USBF_FIFOERROR ; FIFO status
+*******************************************************************************/
+uint16_t usb0_function_read_dma (uint16_t pipe)
+{
+ uint16_t status;
+
+ g_usb0_function_PipeIgnore[pipe] = 0;
+ if ((g_usb0_function_PipeTbl[pipe] & USB_FUNCTION_FIFO_USE) == USB_FUNCTION_D0FIFO_DMA)
+ {
+ status = usb0_function_read_dma_d0(pipe);
+ }
+ else
+ {
+ status = usb0_function_read_dma_d1(pipe);
+ }
+
+ switch (status)
+ {
+ case USB_FUNCTION_READING: /* Continue of data read */
+ break;
+
+ case USB_FUNCTION_READZERO: /* End of data read */
+ usb0_function_disable_brdy_int(pipe);
+ g_usb0_function_pipe_status[pipe] = DEVDRV_USBF_PIPE_DONE;
+ break;
+
+ case USB_FUNCTION_READEND: /* End of data read */
+ case USB_FUNCTION_READSHRT: /* End of data read */
+ usb0_function_disable_brdy_int(pipe);
+
+ if (RZA_IO_RegRead_16(&g_usb0_function_pipecfg[pipe], USB_PIPECFG_BFRE_SHIFT, USB_PIPECFG_BFRE) == 1)
+ {
+ g_usb0_function_PipeDataSize[pipe] -= g_usb0_function_data_count[pipe];
+ }
+ break;
+
+ case USB_FUNCTION_READOVER: /* buffer over */
+ usb0_function_disable_brdy_int(pipe); /* Disable Ready Interrupt */
+
+ if (RZA_IO_RegRead_16(&g_usb0_function_pipecfg[pipe], USB_PIPECFG_BFRE_SHIFT, USB_PIPECFG_BFRE) == 1)
+ {
+ g_usb0_function_PipeDataSize[pipe] -= g_usb0_function_data_count[pipe];
+ }
+ g_usb0_function_pipe_status[pipe] = DEVDRV_USBF_FIFOERROR;
+ break;
+
+ case DEVDRV_USBF_FIFOERROR: /* FIFO access status */
+ default:
+ usb0_function_disable_brdy_int(pipe); /* Disable Ready Interrupt */
+ g_usb0_function_pipe_status[pipe] = DEVDRV_USBF_FIFOERROR;
+ break;
+ }
+
+ return status; /* End or Err or Continue */
+}
+
+/*******************************************************************************
+* Function Name: usb0_function_read_dma_d0
+* Description : Writes data in the buffer allocated in the pipe specified
+* : in the argument.
+* : Reads data by DMA transfer using D0FIFO.
+* Arguments : uint16_t pipe ; Pipe Number
+* Return Value : USB_FUNCTION_READEND ; Read end
+* : USB_FUNCTION_READSHRT ; short data
+* : USB_FUNCTION_READZERO ; zero data
+* : USB_FUNCTION_READING ; Continue of data read
+* : USB_FUNCTION_READOVER ; buffer over
+* : DEVDRV_USBF_FIFOERROR ; FIFO status
+*******************************************************************************/
+static uint16_t usb0_function_read_dma_d0 (uint16_t pipe)
+{
+ uint32_t count;
+ uint32_t dtln;
+ uint16_t buffer;
+ uint16_t mxps;
+ uint16_t status;
+ uint16_t mbw;
+ uint16_t dfacc = 0;
+ uint16_t pipebuf_size;
+
+ g_usb0_function_DmaStatus[USB_FUNCTION_D0FIFO] = USB_FUNCTION_DMA_READY;
+
+ mbw = usb0_function_get_mbw(g_usb0_function_data_count[pipe], (uint32_t)g_usb0_function_data_pointer[pipe]);
+
+ if (RZA_IO_RegRead_16(&g_usb0_function_pipecfg[pipe], USB_PIPECFG_BFRE_SHIFT, USB_PIPECFG_BFRE) == 1)
+ {
+ count = g_usb0_function_data_count[pipe];
+ status = USB_FUNCTION_READING;
+ }
+ else
+ {
+ buffer = usb0_function_change_fifo_port(pipe, USB_FUNCTION_D0DMA, DEVDRV_USBF_NO, mbw);
+
+ if (buffer == DEVDRV_USBF_FIFOERROR) /* FIFO access status */
+ {
+ return DEVDRV_USBF_FIFOERROR;
+ }
+
+ dtln = (uint32_t)(buffer & USB_FUNCTION_BITDTLN);
+ mxps = usb0_function_get_mxps(pipe); /* Max Packet Size */
+
+ if (g_usb0_function_data_count[pipe] < dtln) /* Buffer Over ? */
+ {
+ status = USB_FUNCTION_READOVER;
+ count = g_usb0_function_data_count[pipe];
+ }
+ else if (g_usb0_function_data_count[pipe] == dtln) /* just Receive Size */
+ {
+ status = USB_FUNCTION_READEND;
+ count = dtln;
+ if (count == 0)
+ {
+ status = USB_FUNCTION_READSHRT; /* Null Packet receive */
+ }
+
+ if ((count % mxps) != 0)
+ {
+ status = USB_FUNCTION_READSHRT; /* Short Packet receive */
+ }
+ }
+ else /* continue Receive data */
+ {
+ status = USB_FUNCTION_READING;
+ count = dtln;
+
+ if (count == 0)
+ {
+ status = USB_FUNCTION_READSHRT; /* Null Packet receive */
+ }
+
+ if ((count % mxps) != 0)
+ {
+ status = USB_FUNCTION_READSHRT; /* Short Packet receive */
+ }
+ else
+ {
+ pipebuf_size = usb0_function_get_buf_size(pipe); /* Data buffer size */
+ if (count != pipebuf_size)
+ {
+ status = USB_FUNCTION_READSHRT; /* Short Packet receive */
+ }
+ }
+ }
+ }
+
+ if (count == 0) /* 0 length packet */
+ {
+ if (RZA_IO_RegRead_16(&g_usb0_function_pipecfg[pipe], USB_PIPECFG_BFRE_SHIFT, USB_PIPECFG_BFRE) == 0)
+ {
+ USB200.D0FIFOCTR = USB_FUNCTION_BITBCLR; /* Clear BCLR */
+ status = USB_FUNCTION_READZERO; /* Null Packet receive */
+ }
+ else
+ {
+ usb0_function_set_curpipe(pipe, USB_FUNCTION_D0DMA, DEVDRV_USBF_NO, mbw);
+ /* transaction counter No set */
+ /* FRDY = 1, DTLN = 0 -> BRDY */
+ }
+ }
+ else
+ {
+ dfacc = usb0_function_set_dfacc_d0(mbw, count);
+
+ if (mbw == USB_FUNCTION_BITMBW_32)
+ {
+ g_usb0_function_DmaInfo[USB_FUNCTION_D0FIFO].size = 2; /* 32bit transfer */
+ }
+ else if (mbw == USB_FUNCTION_BITMBW_16)
+ {
+ g_usb0_function_DmaInfo[USB_FUNCTION_D0FIFO].size = 1; /* 16bit transfer */
+ }
+ else
+ {
+ g_usb0_function_DmaInfo[USB_FUNCTION_D0FIFO].size = 0; /* 8bit transfer */
+ }
+
+ g_usb0_function_DmaPipe[USB_FUNCTION_D0FIFO] = pipe; /* not use in read operation */
+ g_usb0_function_DmaBval[USB_FUNCTION_D0FIFO] = 0; /* not use in read operation */
+
+ g_usb0_function_DmaInfo[USB_FUNCTION_D0FIFO].fifo = USB_FUNCTION_D0FIFO_DMA;
+ g_usb0_function_DmaInfo[USB_FUNCTION_D0FIFO].dir = USB_FUNCTION_FIFO2BUF;
+ g_usb0_function_DmaInfo[USB_FUNCTION_D0FIFO].buffer = (uint32_t)g_usb0_function_data_pointer[pipe];
+ g_usb0_function_DmaInfo[USB_FUNCTION_D0FIFO].bytes = count;
+
+ if (status == USB_FUNCTION_READING)
+ {
+ g_usb0_function_DmaStatus[USB_FUNCTION_D0FIFO] = USB_FUNCTION_DMA_BUSY;
+ }
+ else
+ {
+ g_usb0_function_DmaStatus[USB_FUNCTION_D0FIFO] = USB_FUNCTION_DMA_BUSYEND;
+ }
+
+ Userdef_USB_usb0_function_start_dma(&g_usb0_function_DmaInfo[USB_FUNCTION_D0FIFO], dfacc);
+
+ usb0_function_set_curpipe2(pipe, USB_FUNCTION_D0DMA, DEVDRV_USBF_NO, mbw, dfacc);
+
+ RZA_IO_RegWrite_16(&USB200.D0FIFOSEL,
+ 1,
+ USB_DnFIFOSEL_DREQE_SHIFT,
+ USB_DnFIFOSEL_DREQE);
+ }
+
+ if (RZA_IO_RegRead_16(&g_usb0_function_pipecfg[pipe], USB_PIPECFG_BFRE_SHIFT, USB_PIPECFG_BFRE) == 0)
+ {
+ g_usb0_function_data_count[pipe] -= count;
+ g_usb0_function_data_pointer[pipe] += count;
+ g_usb0_function_PipeDataSize[pipe] += count;
+ }
+
+ return status; /* End or Err or Continue */
+}
+
+/*******************************************************************************
+* Function Name: usb0_function_read_dma_d1
+* Description : Reads data from the buffer allocated in the pipe specified in
+* : the argument.
+* : Reads data by DMA transfer using D1FIFO.
+* Arguments : uint16_t pipe ; Pipe Number
+* Return Value : USB_FUNCTION_READEND ; Read end
+* : USB_FUNCTION_READSHRT ; short data
+* : USB_FUNCTION_READZERO ; zero data
+* : USB_FUNCTION_READING ; Continue of data read
+* : USB_FUNCTION_READOVER ; buffer over
+* : DEVDRV_USBF_FIFOERROR ; FIFO status
+*******************************************************************************/
+static uint16_t usb0_function_read_dma_d1 (uint16_t pipe)
+{
+ uint32_t count;
+ uint32_t dtln;
+ uint16_t buffer;
+ uint16_t mxps;
+ uint16_t status;
+ uint16_t mbw;
+ uint16_t dfacc=0;
+ uint16_t pipebuf_size;
+
+ g_usb0_function_DmaStatus[USB_FUNCTION_D1FIFO] = USB_FUNCTION_DMA_READY;
+
+ mbw = usb0_function_get_mbw(g_usb0_function_data_count[pipe], (uint32_t)g_usb0_function_data_pointer[pipe]);
+
+ if (RZA_IO_RegRead_16(&g_usb0_function_pipecfg[pipe], USB_PIPECFG_BFRE_SHIFT, USB_PIPECFG_BFRE) == 1)
+ {
+ count = g_usb0_function_data_count[pipe];
+ status = USB_FUNCTION_READING;
+ }
+ else
+ {
+ buffer = usb0_function_change_fifo_port(pipe, USB_FUNCTION_D1DMA, DEVDRV_USBF_NO, mbw);
+ if (buffer == DEVDRV_USBF_FIFOERROR) /* FIFO access status */
+ {
+ return DEVDRV_USBF_FIFOERROR;
+ }
+
+ dtln = (uint32_t)(buffer & USB_FUNCTION_BITDTLN);
+ mxps = usb0_function_get_mxps(pipe); /* Max Packet Size */
+
+ if (g_usb0_function_data_count[pipe] < dtln) /* Buffer Over ? */
+ {
+ status = USB_FUNCTION_READOVER;
+ count = g_usb0_function_data_count[pipe];
+ }
+ else if (g_usb0_function_data_count[pipe] == dtln) /* just Receive Size */
+ {
+ status = USB_FUNCTION_READEND;
+ count = dtln;
+ if (count == 0)
+ {
+ status = USB_FUNCTION_READSHRT; /* Null Packet receive */
+ }
+
+ if ((count % mxps) != 0)
+ {
+ status = USB_FUNCTION_READSHRT; /* Short Packet receive */
+ }
+ }
+ else /* continue Receive data */
+ {
+ status = USB_FUNCTION_READING;
+ count = dtln;
+ if (count == 0)
+ {
+ status = USB_FUNCTION_READSHRT; /* Null Packet receive */
+ }
+
+ if ((count % mxps) != 0)
+ {
+ status = USB_FUNCTION_READSHRT; /* Short Packet receive */
+ }
+ else
+ {
+ pipebuf_size = usb0_function_get_buf_size(pipe); /* Data buffer size */
+ if (count != pipebuf_size)
+ {
+ status = USB_FUNCTION_READSHRT; /* Short Packet receive */
+ }
+ }
+ }
+ }
+
+ if (count == 0) /* 0 length packet */
+ {
+ if (RZA_IO_RegRead_16(&g_usb0_function_pipecfg[pipe], USB_PIPECFG_BFRE_SHIFT, USB_PIPECFG_BFRE) == 0)
+ {
+ USB200.D1FIFOCTR = USB_FUNCTION_BITBCLR; /* Clear BCLR */
+ status = USB_FUNCTION_READZERO; /* Null Packet receive */
+ }
+ else
+ {
+ usb0_function_set_curpipe(pipe, USB_FUNCTION_D1DMA, DEVDRV_USBF_NO, mbw);
+ /* transaction counter No set */
+ /* FRDY = 1, DTLN = 0 -> BRDY */
+ }
+ }
+ else
+ {
+ dfacc = usb0_function_set_dfacc_d1(mbw, count);
+
+ if (mbw == USB_FUNCTION_BITMBW_32)
+ {
+ g_usb0_function_DmaInfo[USB_FUNCTION_D1FIFO].size = 2; /* 32bit transfer */
+ }
+ else if (mbw == USB_FUNCTION_BITMBW_16)
+ {
+ g_usb0_function_DmaInfo[USB_FUNCTION_D1FIFO].size = 1; /* 16bit transfer */
+ }
+ else
+ {
+ g_usb0_function_DmaInfo[USB_FUNCTION_D1FIFO].size = 0; /* 8bit transfer */
+ }
+
+ g_usb0_function_DmaPipe[USB_FUNCTION_D1FIFO] = pipe; /* not use in read operation */
+ g_usb0_function_DmaBval[USB_FUNCTION_D1FIFO] = 0; /* not use in read operation */
+
+ g_usb0_function_DmaInfo[USB_FUNCTION_D1FIFO].fifo = USB_FUNCTION_D1FIFO_DMA;
+ g_usb0_function_DmaInfo[USB_FUNCTION_D1FIFO].dir = USB_FUNCTION_FIFO2BUF;
+ g_usb0_function_DmaInfo[USB_FUNCTION_D1FIFO].buffer = (uint32_t)g_usb0_function_data_pointer[pipe];
+ g_usb0_function_DmaInfo[USB_FUNCTION_D1FIFO].bytes = count;
+
+ if (status == USB_FUNCTION_READING)
+ {
+ g_usb0_function_DmaStatus[USB_FUNCTION_D1FIFO] = USB_FUNCTION_DMA_BUSY;
+ }
+ else
+ {
+ g_usb0_function_DmaStatus[USB_FUNCTION_D1FIFO] = USB_FUNCTION_DMA_BUSYEND;
+ }
+
+ Userdef_USB_usb0_function_start_dma(&g_usb0_function_DmaInfo[USB_FUNCTION_D1FIFO], dfacc);
+
+ usb0_function_set_curpipe2(pipe, USB_FUNCTION_D1DMA, DEVDRV_USBF_NO, mbw, dfacc);
+
+ RZA_IO_RegWrite_16(&USB200.D1FIFOSEL,
+ 1,
+ USB_DnFIFOSEL_DREQE_SHIFT,
+ USB_DnFIFOSEL_DREQE);
+ }
+
+ if (RZA_IO_RegRead_16(&g_usb0_function_pipecfg[pipe], USB_PIPECFG_BFRE_SHIFT, USB_PIPECFG_BFRE) == 0)
+ {
+ g_usb0_function_data_count[pipe] -= count;
+ g_usb0_function_data_pointer[pipe] += count;
+ g_usb0_function_PipeDataSize[pipe] += count;
+ }
+
+ return status; /* End or Err or Continue */
+}
+
+/*******************************************************************************
+* Function Name: usb0_function_change_fifo_port
+* Description : Allocates FIF0 specified by the argument in the pipe assigned
+* : by the argument. After allocating FIF0, waits in the software
+* : till the corresponding pipe becomes ready.
+* Arguments : uint16_t pipe ; Pipe Number
+* : uint16_t fifosel ; Select FIFO
+* : uint16_t isel ; FIFO Access Direction
+* : uint16_t mbw ; FIFO Port Access Bit Width
+* Return Value : DEVDRV_USBF_FIFOERROR ; Error
+* : Others ; CFIFOCTR/D0FIFOCTR/D1FIFOCTR Register Value
+*******************************************************************************/
+uint16_t usb0_function_change_fifo_port (uint16_t pipe, uint16_t fifosel, uint16_t isel, uint16_t mbw)
+{
+ uint16_t buffer;
+ uint32_t loop;
+ volatile uint32_t loop2;
+
+ usb0_function_set_curpipe(pipe, fifosel, isel, mbw);
+
+ for (loop = 0; loop < 4; loop++)
+ {
+ switch (fifosel)
+ {
+ case USB_FUNCTION_CUSE:
+ buffer = USB200.CFIFOCTR;
+ break;
+
+ case USB_FUNCTION_D0USE:
+ case USB_FUNCTION_D0DMA:
+ buffer = USB200.D0FIFOCTR;
+ break;
+
+ case USB_FUNCTION_D1USE:
+ case USB_FUNCTION_D1DMA:
+ buffer = USB200.D1FIFOCTR;
+ break;
+
+ default:
+ buffer = 0;
+ break;
+ }
+
+ if ((buffer & USB_FUNCTION_BITFRDY) == USB_FUNCTION_BITFRDY)
+ {
+ return buffer;
+ }
+
+ loop2 = 25;
+ while (loop2-- > 0)
+ {
+ /* wait */
+ }
+ }
+
+ return DEVDRV_USBF_FIFOERROR;
+}
+
+/*******************************************************************************
+* Function Name: usb0_function_set_curpipe
+* Description : Allocates FIF0 specified by the argument in the pipe assigned
+* : by the argument.
+* Arguments : uint16_t pipe ; Pipe Number
+* : uint16_t fifosel ; Select FIFO
+* : uint16_t isel ; FIFO Access Direction
+* : uint16_t mbw ; FIFO Port Access Bit Width
+* Return Value : none
+*******************************************************************************/
+void usb0_function_set_curpipe (uint16_t pipe, uint16_t fifosel, uint16_t isel, uint16_t mbw)
+{
+ uint16_t buffer;
+ uint32_t loop;
+ volatile uint32_t loop2;
+
+ g_usb0_function_mbw[pipe] = mbw;
+
+ switch (fifosel)
+ {
+ case USB_FUNCTION_CUSE:
+ buffer = USB200.CFIFOSEL;
+ buffer &= (uint16_t)~(USB_FUNCTION_BITISEL | USB_FUNCTION_BITCURPIPE);
+ buffer |= (uint16_t)(~isel & USB_FUNCTION_BITISEL);
+ USB200.CFIFOSEL = buffer;
+
+ for (loop = 0; loop < 4; loop++)
+ {
+ if ((USB200.CFIFOSEL & (USB_FUNCTION_BITISEL | USB_FUNCTION_BITCURPIPE)) ==
+ (buffer & (USB_FUNCTION_BITISEL | USB_FUNCTION_BITCURPIPE)))
+ {
+ break;
+ }
+
+ loop2 = 100;
+
+ while (loop2-- > 0)
+ {
+ /* wait */
+ }
+ }
+ buffer &= (uint16_t)~(USB_FUNCTION_BITISEL | USB_FUNCTION_BITCURPIPE | USB_FUNCTION_BITMBW);
+ buffer |= (uint16_t)(isel | pipe | mbw);
+ USB200.CFIFOSEL = buffer;
+
+ for (loop = 0; loop < 4; loop++)
+ {
+ if ((USB200.CFIFOSEL & (USB_FUNCTION_BITISEL | USB_FUNCTION_BITCURPIPE)) ==
+ (buffer & (USB_FUNCTION_BITISEL | USB_FUNCTION_BITCURPIPE)))
+ {
+ break;
+ }
+
+ loop2 = 100;
+
+ while (loop2-- > 0)
+ {
+ /* wait */
+ }
+ }
+ break;
+
+ case USB_FUNCTION_D0DMA:
+ case USB_FUNCTION_D0USE:
+ buffer = USB200.D0FIFOSEL;
+ buffer &= (uint16_t)~(USB_FUNCTION_BITCURPIPE);
+ USB200.D0FIFOSEL = buffer;
+
+ for (loop = 0; loop < 4; loop++)
+ {
+ if ((USB200.D0FIFOSEL & USB_FUNCTION_BITCURPIPE) ==
+ (buffer & USB_FUNCTION_BITCURPIPE))
+ {
+ break;
+ }
+
+ loop2 = 100;
+
+ while (loop2-- > 0)
+ {
+ /* wait */
+ }
+ }
+ buffer &= (uint16_t)~(USB_FUNCTION_BITCURPIPE | USB_FUNCTION_BITMBW);
+ buffer |= (uint16_t)(pipe | mbw);
+ USB200.D0FIFOSEL = buffer;
+
+ for (loop = 0; loop < 4; loop++)
+ {
+ if ((USB200.D0FIFOSEL & USB_FUNCTION_BITCURPIPE) ==
+ (buffer & USB_FUNCTION_BITCURPIPE))
+ {
+ break;
+ }
+
+ loop2 = 100;
+ while (loop2-- > 0)
+ {
+ /* wait */
+ }
+ }
+ break;
+
+ case USB_FUNCTION_D1DMA:
+ case USB_FUNCTION_D1USE:
+ buffer = USB200.D1FIFOSEL;
+ buffer &= (uint16_t)~(USB_FUNCTION_BITCURPIPE);
+ USB200.D1FIFOSEL = buffer;
+
+ for (loop = 0; loop < 4; loop++)
+ {
+ if ((USB200.D1FIFOSEL & USB_FUNCTION_BITCURPIPE) ==
+ (buffer & USB_FUNCTION_BITCURPIPE))
+ {
+ break;
+ }
+
+ loop2 = 100;
+
+ while (loop2-- > 0)
+ {
+ /* wait */
+ }
+ }
+ buffer &= (uint16_t)~(USB_FUNCTION_BITCURPIPE | USB_FUNCTION_BITMBW);
+ buffer |= (uint16_t)(pipe | mbw);
+ USB200.D1FIFOSEL = buffer;
+
+ for (loop = 0; loop < 4; loop++)
+ {
+ if ((USB200.D1FIFOSEL & USB_FUNCTION_BITCURPIPE) ==
+ (buffer & USB_FUNCTION_BITCURPIPE))
+ {
+ break;
+ }
+
+ loop2 = 100;
+
+ while (loop2-- > 0)
+ {
+ /* wait */
+ }
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Cautions !!!
+ * Depending on the external bus speed of CPU, you may need to wait for 450ns here.
+ * For details, please look at the data sheet. */
+ loop2 = 100;
+
+ while (loop2-- > 0)
+ {
+ /* wait */
+ }
+}
+
+/*******************************************************************************
+* Function Name: usb0_function_set_curpipe2
+* Description : Allocates FIF0 specified by the argument in the pipe assigned
+* : by the argument.
+* Arguments : uint16_t pipe ; Pipe Number
+* : uint16_t fifosel ; Select FIFO
+* : uint16_t isel ; FIFO Access Direction
+* : uint16_t mbw ; FIFO Port Access Bit Width
+* : uint16_t dfacc ; DFACC Access mode
+* Return Value : none
+*******************************************************************************/
+void usb0_function_set_curpipe2 (uint16_t pipe, uint16_t fifosel, uint16_t isel, uint16_t mbw, uint16_t dfacc)
+{
+ uint16_t buffer;
+ uint32_t loop;
+#ifdef __USB_FUNCTION_DF_ACC_ENABLE__
+ uint32_t dummy;
+#endif
+ volatile uint32_t loop2;
+
+ g_usb0_function_mbw[pipe] = mbw;
+
+ switch (fifosel)
+ {
+ case USB_FUNCTION_CUSE:
+ buffer = USB200.CFIFOSEL;
+ buffer &= (uint16_t)~(USB_FUNCTION_BITISEL | USB_FUNCTION_BITCURPIPE);
+ buffer |= (uint16_t)(~isel & USB_FUNCTION_BITISEL);
+ USB200.CFIFOSEL = buffer;
+
+ for (loop = 0; loop < 4; loop++)
+ {
+ if ((USB200.CFIFOSEL & (USB_FUNCTION_BITISEL | USB_FUNCTION_BITCURPIPE)) ==
+ (buffer & (USB_FUNCTION_BITISEL | USB_FUNCTION_BITCURPIPE)))
+ {
+ break;
+ }
+
+ loop2 = 100;
+ while (loop2-- > 0)
+ {
+ /* wait */
+ }
+ }
+ buffer &= (uint16_t)~(USB_FUNCTION_BITISEL | USB_FUNCTION_BITCURPIPE | USB_FUNCTION_BITMBW);
+ buffer |= (uint16_t)(isel | pipe | mbw);
+ USB200.CFIFOSEL = buffer;
+
+ for (loop = 0; loop < 4; loop++)
+ {
+ if ((USB200.CFIFOSEL & (USB_FUNCTION_BITISEL | USB_FUNCTION_BITCURPIPE)) ==
+ (buffer & (USB_FUNCTION_BITISEL | USB_FUNCTION_BITCURPIPE)))
+ {
+ break;
+ }
+
+ loop2 = 100;
+
+ while (loop2-- > 0)
+ {
+ /* wait */
+ }
+ }
+ break;
+
+ case USB_FUNCTION_D0DMA:
+ case USB_FUNCTION_D0USE:
+ buffer = USB200.D0FIFOSEL;
+#ifdef __USB_FUNCTION_DF_ACC_ENABLE__
+ buffer &= (uint16_t)~(USB_FUNCTION_BITCURPIPE | USB_FUNCTION_BITMBW);
+
+ if (dfacc != 0)
+ {
+ buffer |= (uint16_t)(USB_FUNCTION_BITMBW_32);
+ }
+#else
+ buffer &= (uint16_t)~(USB_FUNCTION_BITCURPIPE);
+#endif
+ USB200.D0FIFOSEL = buffer;
+
+ for (loop = 0; loop < 4; loop++)
+ {
+ if ((USB200.D0FIFOSEL & USB_FUNCTION_BITCURPIPE) == (buffer & USB_FUNCTION_BITCURPIPE))
+ {
+ break;
+ }
+
+ loop2 = 100;
+
+ while (loop2-- > 0)
+ {
+ /* wait */
+ }
+ }
+
+#ifdef __USB_FUNCTION_DF_ACC_ENABLE__
+ if (dfacc != 0)
+ {
+ dummy = USB200.D0FIFO.UINT32;
+ }
+#endif
+ buffer &= (uint16_t)~(USB_FUNCTION_BITCURPIPE | USB_FUNCTION_BITMBW);
+ buffer |= (uint16_t)(pipe | mbw);
+ USB200.D0FIFOSEL = buffer;
+
+ for (loop = 0; loop < 4; loop++)
+ {
+ if ((USB200.D0FIFOSEL & USB_FUNCTION_BITCURPIPE) == (buffer & USB_FUNCTION_BITCURPIPE))
+ {
+ break;
+ }
+
+ loop2 = 100;
+
+ while (loop2-- > 0)
+ {
+ /* wait */
+ }
+ }
+ break;
+
+ case USB_FUNCTION_D1DMA:
+ case USB_FUNCTION_D1USE:
+ buffer = USB200.D1FIFOSEL;
+#ifdef __USB_FUNCTION_DF_ACC_ENABLE__
+ buffer &= (uint16_t)~(USB_FUNCTION_BITCURPIPE | USB_FUNCTION_BITMBW);
+
+ if (dfacc != 0)
+ {
+ buffer |= (uint16_t)(USB_FUNCTION_BITMBW_32);
+ }
+#else
+ buffer &= (uint16_t)~(USB_FUNCTION_BITCURPIPE);
+#endif
+ USB200.D1FIFOSEL = buffer;
+
+ for (loop = 0; loop < 4; loop++)
+ {
+ if ((USB200.D1FIFOSEL & USB_FUNCTION_BITCURPIPE) == (buffer & USB_FUNCTION_BITCURPIPE))
+ {
+ break;
+ }
+
+ loop2 = 100;
+
+ while (loop2-- > 0)
+ {
+ /* wait */
+ }
+ }
+#ifdef __USB_FUNCTION_DF_ACC_ENABLE__
+ if (dfacc != 0)
+ {
+ dummy = USB200.D1FIFO.UINT32;
+ loop = dummy; // avoid warning.
+ }
+#endif
+ buffer &= (uint16_t)~(USB_FUNCTION_BITCURPIPE | USB_FUNCTION_BITMBW);
+ buffer |= (uint16_t)(pipe | mbw);
+ USB200.D1FIFOSEL = buffer;
+
+ for (loop = 0; loop < 4; loop++)
+ {
+ if ((USB200.D1FIFOSEL & USB_FUNCTION_BITCURPIPE) == (buffer & USB_FUNCTION_BITCURPIPE))
+ {
+ break;
+ }
+
+ loop2 = 100;
+
+ while (loop2-- > 0)
+ {
+ /* wait */
+ }
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Cautions !!!
+ * Depending on the external bus speed of CPU, you may need to wait for 450ns here.
+ * For details, please look at the data sheet. */
+ loop2 = 100;
+
+ while (loop2-- > 0)
+ {
+ /* wait */
+ }
+}
+
+/*******************************************************************************
+* Function Name: usb0_function_write_c_fifo
+* Description : Writes data in CFIFO.
+* : Writes data by BYTE/WORD/LONG according to access size
+* : to the pipe specified by the arguments.
+* : Before executing this function, allocating CFIF0 in the specified pipe
+* : should be completed.
+* : Before executing this function, access size to the specified pipe
+* : should be fixed and set in g_usb0_function_mbw[].
+* Arguments : uint16_t pipe ; Pipe Number
+* : uint16_t count ; Data Size(Byte)
+* Return Value : none
+*******************************************************************************/
+static void usb0_function_write_c_fifo (uint16_t pipe, uint16_t count)
+{
+ uint16_t even;
+
+ if (g_usb0_function_mbw[pipe] == USB_FUNCTION_BITMBW_8)
+ {
+ for (even = count; even; --even)
+ {
+ USB200.CFIFO.UINT8[HH] = *g_usb0_function_data_pointer[pipe];
+ g_usb0_function_data_pointer[pipe] += 1;
+ }
+ }
+ else if (g_usb0_function_mbw[pipe] == USB_FUNCTION_BITMBW_16)
+ {
+ for (even = (uint16_t)(count / 2); even; --even)
+ {
+ USB200.CFIFO.UINT16[H] = *((uint16_t *)g_usb0_function_data_pointer[pipe]);
+ g_usb0_function_data_pointer[pipe] += 2;
+ }
+ }
+ else
+ {
+ for (even = (uint16_t)(count / 4); even; --even)
+ {
+ USB200.CFIFO.UINT32 = *((uint32_t *)g_usb0_function_data_pointer[pipe]);
+ g_usb0_function_data_pointer[pipe] += 4;
+ }
+ }
+}
+
+/*******************************************************************************
+* Function Name: usb0_function_read_c_fifo
+* Description : Reads data from CFIFO.
+* : Reads data by BYTE/WORD/LONG according to access size
+* : to the pipe specified by the arguments.
+* : Before executing this function, allocating CFIF0 in the specified pipe
+* : should be completed.
+* : Before executing this function, access size to the specified pipe
+* : should be fixed and set in g_usb0_function_mbw[].
+* Arguments : uint16_t pipe ; Pipe Number
+* : uint16_t count ; Data Size(Byte)
+* Return Value : none
+*******************************************************************************/
+static void usb0_function_read_c_fifo (uint16_t pipe, uint16_t count)
+{
+ uint16_t even;
+
+ if (g_usb0_function_mbw[pipe] == USB_FUNCTION_BITMBW_8)
+ {
+ for (even = count; even; --even)
+ {
+ *g_usb0_function_data_pointer[pipe] = USB200.CFIFO.UINT8[HH];
+ g_usb0_function_data_pointer[pipe] += 1;
+ }
+ }
+ else if (g_usb0_function_mbw[pipe] == USB_FUNCTION_BITMBW_16)
+ {
+ for (even = (uint16_t)((count + 1) / 2); even; --even)
+ {
+ *((uint16_t *)g_usb0_function_data_pointer[pipe]) = USB200.CFIFO.UINT16[H];
+ g_usb0_function_data_pointer[pipe] += 2;
+ }
+ }
+ else
+ {
+ for (even = (uint16_t)((count + 3) / 4); even; --even)
+ {
+ *((uint32_t *)g_usb0_function_data_pointer[pipe]) = USB200.CFIFO.UINT32;
+ g_usb0_function_data_pointer[pipe] += 4;
+ }
+ }
+}
+
+/*******************************************************************************
+* Function Name: usb0_function_write_d0_fifo
+* Description : Writes data in D0FIFO.
+* : Writes data by BYTE/WORD/LONG according to access size
+* : to the pipe specified by the arguments.
+* : Before executing this function, allocating CFIF0 in the specified pipe
+* : should be completed.
+* : Before executing this function, access size to the specified pipe
+* : should be fixed and set in g_usb0_function_mbw[].
+* Arguments : uint16_t pipe ; Pipe Number
+* : uint16_t count ; Data Size(Byte)
+* Return Value : none
+*******************************************************************************/
+static void usb0_function_write_d0_fifo (uint16_t pipe, uint16_t count)
+{
+ uint16_t even;
+
+ if (g_usb0_function_mbw[pipe] == USB_FUNCTION_BITMBW_8)
+ {
+ for (even = count; even; --even)
+ {
+ USB200.D0FIFO.UINT8[HH] = *g_usb0_function_data_pointer[pipe];
+ g_usb0_function_data_pointer[pipe] += 1;
+ }
+ }
+ else if (g_usb0_function_mbw[pipe] == USB_FUNCTION_BITMBW_16)
+ {
+ for (even = (uint16_t)(count / 2); even; --even)
+ {
+ USB200.D0FIFO.UINT16[H] = *((uint16_t *)g_usb0_function_data_pointer[pipe]);
+ g_usb0_function_data_pointer[pipe] += 2;
+ }
+ }
+ else
+ {
+ for (even = (uint16_t)(count / 4); even; --even)
+ {
+ USB200.D0FIFO.UINT32 = *((uint32_t *)g_usb0_function_data_pointer[pipe]);
+ g_usb0_function_data_pointer[pipe] += 4;
+ }
+ }
+}
+
+/*******************************************************************************
+* Function Name: usb0_function_read_d0_fifo
+* Description : Reads data from D0FIFO.
+* : Reads data by BYTE/WORD/LONG according to access size
+* : to the pipe specified by the arguments.
+* : Before executing this function, allocating DOFIF0 in the specified pipe
+* : should be completed.
+* : Before executing this function, access size to the specified pipe
+* : should be fixed and set in g_usb0_function_mbw[].
+* Arguments : uint16_t pipe ; Pipe Number
+* : uint16_t count ; Data Size(Byte)
+* Return Value : none
+*******************************************************************************/
+static void usb0_function_read_d0_fifo (uint16_t pipe, uint16_t count)
+{
+ uint16_t even;
+
+ if (g_usb0_function_mbw[pipe] == USB_FUNCTION_BITMBW_8)
+ {
+ for (even = count; even; --even)
+ {
+ *g_usb0_function_data_pointer[pipe] = USB200.D0FIFO.UINT8[HH];
+ g_usb0_function_data_pointer[pipe] += 1;
+ }
+ }
+ else if (g_usb0_function_mbw[pipe] == USB_FUNCTION_BITMBW_16)
+ {
+ for (even = (uint16_t)((count + 1) / 2); even; --even)
+ {
+ *((uint16_t *)g_usb0_function_data_pointer[pipe]) = USB200.D0FIFO.UINT16[H];
+ g_usb0_function_data_pointer[pipe] += 2;
+ }
+ }
+ else
+ {
+ for (even = (uint16_t)((count + 3) / 4); even; --even)
+ {
+ *((uint32_t *)g_usb0_function_data_pointer[pipe]) = USB200.D0FIFO.UINT32;
+ g_usb0_function_data_pointer[pipe] += 4;
+ }
+ }
+}
+
+/*******************************************************************************
+* Function Name: usb0_function_write_d1_fifo
+* Description : Writes data in D1FIFO.
+* : Writes data by BYTE/WORD/LONG according to access size
+* : to the pipe specified by the arguments.
+* : Before executing this function, allocating D1FIF0 in the specified pipe
+* : should be completed.
+* : Before executing this function, access size to the specified pipe
+* : should be fixed and set in g_usb0_function_mbw[].
+* Arguments : uint16_t pipe ; Pipe Number
+* : uint16_t count ; Data Size(Byte)
+* Return Value : none
+*******************************************************************************/
+static void usb0_function_write_d1_fifo (uint16_t pipe, uint16_t count)
+{
+ uint16_t even;
+
+ if (g_usb0_function_mbw[pipe] == USB_FUNCTION_BITMBW_8)
+ {
+ for (even = count; even; --even)
+ {
+ USB200.D1FIFO.UINT8[HH] = *g_usb0_function_data_pointer[pipe];
+ g_usb0_function_data_pointer[pipe] += 1;
+ }
+ }
+ else if (g_usb0_function_mbw[pipe] == USB_FUNCTION_BITMBW_16)
+ {
+ for (even = (uint16_t)(count / 2); even; --even)
+ {
+ USB200.D1FIFO.UINT16[H] = *((uint16_t *)g_usb0_function_data_pointer[pipe]);
+ g_usb0_function_data_pointer[pipe] += 2;
+ }
+ }
+ else
+ {
+ for (even = (uint16_t)(count / 4); even; --even)
+ {
+ USB200.D1FIFO.UINT32 = *((uint32_t *)g_usb0_function_data_pointer[pipe]);
+ g_usb0_function_data_pointer[pipe] += 4;
+ }
+ }
+}
+
+/*******************************************************************************
+* Function Name: usb0_function_read_d1_fifo
+* Description : Reads data from D1FIFO.
+* : Reads data by BYTE/WORD/LONG according to access size
+* : to the pipe specified by the arguments.
+* : Before executing this function, allocating D1FIF0 in the specified pipe
+* : should be completed.
+* : Before executing this function, access size to the specified pipe
+* : should be fixed and set in g_usb0_function_mbw[].
+* Arguments : uint16_t pipe ; Pipe Number
+* : uint16_t count ; Data Size(Byte)
+* Return Value : none
+*******************************************************************************/
+static void usb0_function_read_d1_fifo (uint16_t pipe, uint16_t count)
+{
+ uint16_t even;
+
+ if (g_usb0_function_mbw[pipe] == USB_FUNCTION_BITMBW_8)
+ {
+ for (even = count; even; --even)
+ {
+ *g_usb0_function_data_pointer[pipe] = USB200.D1FIFO.UINT8[HH];
+ g_usb0_function_data_pointer[pipe] += 1;
+ }
+ }
+ else if (g_usb0_function_mbw[pipe] == USB_FUNCTION_BITMBW_16)
+ {
+ for (even = (uint16_t)((count + 1) / 2); even; --even)
+ {
+ *((uint16_t *)g_usb0_function_data_pointer[pipe]) = USB200.D1FIFO.UINT16[H];
+ g_usb0_function_data_pointer[pipe] += 2;
+ }
+ }
+ else
+ {
+ for (even = (uint16_t)((count + 3) / 4); even; --even)
+ {
+ *((uint32_t *)g_usb0_function_data_pointer[pipe]) = USB200.D1FIFO.UINT32;
+ g_usb0_function_data_pointer[pipe] += 4;
+ }
+ }
+}
+
+/*******************************************************************************
+* Function Name: usb0_function_com_get_dmasize
+* Description : Calculates access width of DMA transfer by the argument to
+* : return as the Return Value.
+* Arguments : uint32_t trncount : transfer byte
+* : uint32_t dtptr : transfer data pointer
+* Return Value : DMA transfer size : 0 8bit
+* : : 1 16bit
+* : : 2 32bit
+*******************************************************************************/
+static uint32_t usb0_function_com_get_dmasize (uint32_t trncount, uint32_t dtptr)
+{
+ uint32_t size;
+
+ if (((trncount & 0x0001) != 0) || ((dtptr & 0x00000001) != 0))
+ {
+ /* When transfer byte count is odd */
+ /* or transfer data area is 8-bit alignment */
+ size = 0; /* 8bit */
+ }
+ else if (((trncount & 0x0003) != 0) || ((dtptr & 0x00000003) != 0))
+ {
+ /* When the transfer byte count is multiples of 2 */
+ /* or the transfer data area is 16-bit alignment */
+ size = 1; /* 16bit */
+ }
+ else
+ {
+ /* When the transfer byte count is multiples of 4 */
+ /* or the transfer data area is 32-bit alignment */
+ size = 2; /* 32bit */
+ }
+
+ return size;
+}
+
+/*******************************************************************************
+* Function Name: usb0_function_get_mbw
+* Description : Calculates access width of DMA to return the value set in MBW.
+* Arguments : uint32_t trncount : transfer byte
+* : uint32_t dtptr : transfer data pointer
+* Return Value : FIFO transfer size : USB_FUNCTION_BITMBW_8 8bit
+* : : USB_FUNCTION_BITMBW_16 16bit
+* : : USB_FUNCTION_BITMBW_32 32bit
+*******************************************************************************/
+uint16_t usb0_function_get_mbw (uint32_t trncount, uint32_t dtptr)
+{
+ uint32_t size;
+ uint16_t mbw;
+
+ size = usb0_function_com_get_dmasize(trncount, dtptr);
+
+ if (size == 0)
+ {
+ /* 8bit */
+ mbw = USB_FUNCTION_BITMBW_8;
+ }
+ else if (size == 1)
+ {
+ /* 16bit */
+ mbw = USB_FUNCTION_BITMBW_16;
+ }
+ else
+ {
+ /* 32bit */
+ mbw = USB_FUNCTION_BITMBW_32;
+ }
+
+ return mbw;
+}
+
+/*******************************************************************************
+* Function Name: usb0_function_set_transaction_counter
+* Description : Sets transaction counter by the argument(PIPEnTRN).
+* : Clears transaction before setting to enable transaction counter setting.
+* Arguments : uint16_t pipe ; Pipe number
+* : uint32_t bsize : Data transfer size
+* Return Value : none
+*******************************************************************************/
+static void usb0_function_set_transaction_counter (uint16_t pipe, uint32_t bsize)
+{
+ uint16_t mxps;
+ uint16_t cnt;
+
+ if (bsize == 0)
+ {
+ return;
+ }
+
+ mxps = usb0_function_get_mxps(pipe); /* Max Packet Size */
+
+ if ((bsize % mxps) == 0)
+ {
+ cnt = (uint16_t)(bsize / mxps);
+ }
+ else
+ {
+ cnt = (uint16_t)((bsize / mxps) + 1);
+ }
+
+ switch (pipe)
+ {
+ case USB_FUNCTION_PIPE1:
+ RZA_IO_RegWrite_16(&USB200.PIPE1TRE,
+ 1,
+ USB_PIPEnTRE_TRCLR_SHIFT,
+ USB_PIPEnTRE_TRCLR);
+ USB200.PIPE1TRN = cnt;
+ RZA_IO_RegWrite_16(&USB200.PIPE1TRE,
+ 1,
+ USB_PIPEnTRE_TRENB_SHIFT,
+ USB_PIPEnTRE_TRENB);
+ break;
+
+ case USB_FUNCTION_PIPE2:
+ RZA_IO_RegWrite_16(&USB200.PIPE2TRE,
+ 1,
+ USB_PIPEnTRE_TRCLR_SHIFT,
+ USB_PIPEnTRE_TRCLR);
+ USB200.PIPE2TRN = cnt;
+ RZA_IO_RegWrite_16(&USB200.PIPE2TRE,
+ 1,
+ USB_PIPEnTRE_TRENB_SHIFT,
+ USB_PIPEnTRE_TRENB);
+ break;
+
+ case USB_FUNCTION_PIPE3:
+ RZA_IO_RegWrite_16(&USB200.PIPE3TRE,
+ 1,
+ USB_PIPEnTRE_TRCLR_SHIFT,
+ USB_PIPEnTRE_TRCLR);
+ USB200.PIPE3TRN = cnt;
+ RZA_IO_RegWrite_16(&USB200.PIPE3TRE,
+ 1,
+ USB_PIPEnTRE_TRENB_SHIFT,
+ USB_PIPEnTRE_TRENB);
+ break;
+
+ case USB_FUNCTION_PIPE4:
+ RZA_IO_RegWrite_16(&USB200.PIPE4TRE,
+ 1,
+ USB_PIPEnTRE_TRCLR_SHIFT,
+ USB_PIPEnTRE_TRCLR);
+ USB200.PIPE4TRN = cnt;
+ RZA_IO_RegWrite_16(&USB200.PIPE4TRE,
+ 1,
+ USB_PIPEnTRE_TRENB_SHIFT,
+ USB_PIPEnTRE_TRENB);
+ break;
+
+ case USB_FUNCTION_PIPE5:
+ RZA_IO_RegWrite_16(&USB200.PIPE5TRE,
+ 1,
+ USB_PIPEnTRE_TRCLR_SHIFT,
+ USB_PIPEnTRE_TRCLR);
+ USB200.PIPE5TRN = cnt;
+ RZA_IO_RegWrite_16(&USB200.PIPE5TRE,
+ 1,
+ USB_PIPEnTRE_TRENB_SHIFT,
+ USB_PIPEnTRE_TRENB);
+ break;
+
+ case USB_FUNCTION_PIPE9:
+ RZA_IO_RegWrite_16(&USB200.PIPE9TRE,
+ 1,
+ USB_PIPEnTRE_TRCLR_SHIFT,
+ USB_PIPEnTRE_TRCLR);
+ USB200.PIPE9TRN = cnt;
+ RZA_IO_RegWrite_16(&USB200.PIPE9TRE,
+ 1,
+ USB_PIPEnTRE_TRENB_SHIFT,
+ USB_PIPEnTRE_TRENB);
+ break;
+
+ case USB_FUNCTION_PIPEA:
+ RZA_IO_RegWrite_16(&USB200.PIPEATRE,
+ 1,
+ USB_PIPEnTRE_TRCLR_SHIFT,
+ USB_PIPEnTRE_TRCLR);
+ USB200.PIPEATRN = cnt;
+ RZA_IO_RegWrite_16(&USB200.PIPEATRE,
+ 1,
+ USB_PIPEnTRE_TRENB_SHIFT,
+ USB_PIPEnTRE_TRENB);
+ break;
+
+ case USB_FUNCTION_PIPEB:
+ RZA_IO_RegWrite_16(&USB200.PIPEBTRE,
+ 1,
+ USB_PIPEnTRE_TRCLR_SHIFT,
+ USB_PIPEnTRE_TRCLR);
+ USB200.PIPEBTRN = cnt;
+ RZA_IO_RegWrite_16(&USB200.PIPEBTRE,
+ 1,
+ USB_PIPEnTRE_TRENB_SHIFT,
+ USB_PIPEnTRE_TRENB);
+ break;
+
+ case USB_FUNCTION_PIPEC:
+ RZA_IO_RegWrite_16(&USB200.PIPECTRE,
+ 1,
+ USB_PIPEnTRE_TRCLR_SHIFT,
+ USB_PIPEnTRE_TRCLR);
+ USB200.PIPECTRN = cnt;
+ RZA_IO_RegWrite_16(&USB200.PIPECTRE,
+ 1,
+ USB_PIPEnTRE_TRENB_SHIFT,
+ USB_PIPEnTRE_TRENB);
+ break;
+
+ case USB_FUNCTION_PIPED:
+ RZA_IO_RegWrite_16(&USB200.PIPEDTRE,
+ 1,
+ USB_PIPEnTRE_TRCLR_SHIFT,
+ USB_PIPEnTRE_TRCLR);
+ USB200.PIPEDTRN = cnt;
+ RZA_IO_RegWrite_16(&USB200.PIPEDTRE,
+ 1,
+ USB_PIPEnTRE_TRENB_SHIFT,
+ USB_PIPEnTRE_TRENB);
+ break;
+
+ case USB_FUNCTION_PIPEE:
+ RZA_IO_RegWrite_16(&USB200.PIPEETRE,
+ 1,
+ USB_PIPEnTRE_TRCLR_SHIFT,
+ USB_PIPEnTRE_TRCLR);
+ USB200.PIPEETRN = cnt;
+ RZA_IO_RegWrite_16(&USB200.PIPEETRE,
+ 1,
+ USB_PIPEnTRE_TRENB_SHIFT,
+ USB_PIPEnTRE_TRENB);
+ break;
+
+ case USB_FUNCTION_PIPEF:
+ RZA_IO_RegWrite_16(&USB200.PIPEFTRE,
+ 1,
+ USB_PIPEnTRE_TRCLR_SHIFT,
+ USB_PIPEnTRE_TRCLR);
+ USB200.PIPEFTRN = cnt;
+ RZA_IO_RegWrite_16(&USB200.PIPEFTRE,
+ 1,
+ USB_PIPEnTRE_TRENB_SHIFT,
+ USB_PIPEnTRE_TRENB);
+ break;
+
+ default:
+ break;
+ }
+}
+
+/*******************************************************************************
+* Function Name: usb0_function_clear_transaction_counter
+* Description : Clears the transaction counter by the argument.
+* : After executing this function, the transaction counter is invalid.
+* Arguments : uint16_t pipe ; Pipe number
+* Return Value : none
+*******************************************************************************/
+void usb0_function_clear_transaction_counter (uint16_t pipe)
+{
+ switch (pipe)
+ {
+ case USB_FUNCTION_PIPE1:
+ RZA_IO_RegWrite_16(&USB200.PIPE1TRE,
+ 0,
+ USB_PIPEnTRE_TRENB_SHIFT,
+ USB_PIPEnTRE_TRENB);
+ RZA_IO_RegWrite_16(&USB200.PIPE1TRE,
+ 1,
+ USB_PIPEnTRE_TRCLR_SHIFT,
+ USB_PIPEnTRE_TRCLR);
+ break;
+
+ case USB_FUNCTION_PIPE2:
+ RZA_IO_RegWrite_16(&USB200.PIPE2TRE,
+ 0,
+ USB_PIPEnTRE_TRENB_SHIFT,
+ USB_PIPEnTRE_TRENB);
+ RZA_IO_RegWrite_16(&USB200.PIPE2TRE,
+ 1,
+ USB_PIPEnTRE_TRCLR_SHIFT,
+ USB_PIPEnTRE_TRCLR);
+ break;
+
+ case USB_FUNCTION_PIPE3:
+ RZA_IO_RegWrite_16(&USB200.PIPE3TRE,
+ 0,
+ USB_PIPEnTRE_TRENB_SHIFT,
+ USB_PIPEnTRE_TRENB);
+ RZA_IO_RegWrite_16(&USB200.PIPE3TRE,
+ 1,
+ USB_PIPEnTRE_TRCLR_SHIFT,
+ USB_PIPEnTRE_TRCLR);
+ break;
+
+ case USB_FUNCTION_PIPE4:
+ RZA_IO_RegWrite_16(&USB200.PIPE4TRE,
+ 0,
+ USB_PIPEnTRE_TRENB_SHIFT,
+ USB_PIPEnTRE_TRENB);
+ RZA_IO_RegWrite_16(&USB200.PIPE4TRE,
+ 1,
+ USB_PIPEnTRE_TRCLR_SHIFT,
+ USB_PIPEnTRE_TRCLR);
+ break;
+
+ case USB_FUNCTION_PIPE5:
+ RZA_IO_RegWrite_16(&USB200.PIPE5TRE,
+ 0,
+ USB_PIPEnTRE_TRENB_SHIFT,
+ USB_PIPEnTRE_TRENB);
+ RZA_IO_RegWrite_16(&USB200.PIPE5TRE,
+ 1,
+ USB_PIPEnTRE_TRCLR_SHIFT,
+ USB_PIPEnTRE_TRCLR);
+ break;
+
+ case USB_FUNCTION_PIPE9:
+ RZA_IO_RegWrite_16(&USB200.PIPE9TRE,
+ 0,
+ USB_PIPEnTRE_TRENB_SHIFT,
+ USB_PIPEnTRE_TRENB);
+ RZA_IO_RegWrite_16(&USB200.PIPE9TRE,
+ 1,
+ USB_PIPEnTRE_TRCLR_SHIFT,
+ USB_PIPEnTRE_TRCLR);
+ break;
+
+ case USB_FUNCTION_PIPEA:
+ RZA_IO_RegWrite_16(&USB200.PIPEATRE,
+ 0,
+ USB_PIPEnTRE_TRENB_SHIFT,
+ USB_PIPEnTRE_TRENB);
+ RZA_IO_RegWrite_16(&USB200.PIPEATRE,
+ 1,
+ USB_PIPEnTRE_TRCLR_SHIFT,
+ USB_PIPEnTRE_TRCLR);
+ break;
+
+ case USB_FUNCTION_PIPEB:
+ RZA_IO_RegWrite_16(&USB200.PIPEBTRE,
+ 0,
+ USB_PIPEnTRE_TRENB_SHIFT,
+ USB_PIPEnTRE_TRENB);
+ RZA_IO_RegWrite_16(&USB200.PIPEBTRE,
+ 1,
+ USB_PIPEnTRE_TRCLR_SHIFT,
+ USB_PIPEnTRE_TRCLR);
+ break;
+
+ case USB_FUNCTION_PIPEC:
+ RZA_IO_RegWrite_16(&USB200.PIPECTRE,
+ 0,
+ USB_PIPEnTRE_TRENB_SHIFT,
+ USB_PIPEnTRE_TRENB);
+ RZA_IO_RegWrite_16(&USB200.PIPECTRE,
+ 1,
+ USB_PIPEnTRE_TRCLR_SHIFT,
+ USB_PIPEnTRE_TRCLR);
+ break;
+
+ case USB_FUNCTION_PIPED:
+ RZA_IO_RegWrite_16(&USB200.PIPEDTRE,
+ 0,
+ USB_PIPEnTRE_TRENB_SHIFT,
+ USB_PIPEnTRE_TRENB);
+ RZA_IO_RegWrite_16(&USB200.PIPEDTRE,
+ 1,
+ USB_PIPEnTRE_TRCLR_SHIFT,
+ USB_PIPEnTRE_TRCLR);
+ break;
+
+ case USB_FUNCTION_PIPEE:
+ RZA_IO_RegWrite_16(&USB200.PIPEETRE,
+ 0,
+ USB_PIPEnTRE_TRENB_SHIFT,
+ USB_PIPEnTRE_TRENB);
+ RZA_IO_RegWrite_16(&USB200.PIPEETRE,
+ 1,
+ USB_PIPEnTRE_TRCLR_SHIFT,
+ USB_PIPEnTRE_TRCLR);
+ break;
+
+ case USB_FUNCTION_PIPEF:
+ RZA_IO_RegWrite_16(&USB200.PIPEFTRE,
+ 0,
+ USB_PIPEnTRE_TRENB_SHIFT,
+ USB_PIPEnTRE_TRENB);
+ RZA_IO_RegWrite_16(&USB200.PIPEFTRE,
+ 1,
+ USB_PIPEnTRE_TRCLR_SHIFT,
+ USB_PIPEnTRE_TRCLR);
+ break;
+
+ default:
+ break;
+ }
+}
+
+/*******************************************************************************
+* Function Name: usb0_function_stop_transfer
+* Description : Stops the USB transfer in the pipe specified by the argument.
+* : After stopping the USB transfer, clears the buffer allocated in
+* : the pipe.
+* : After executing this function, allocation in FIF0 becomes USB_FUNCTION_PIPE0;
+* : invalid. After executing this function, BRDY/NRDY/BEMP interrupt
+* : in the corresponding pipe becomes invalid. Sequence bit is also
+* : cleared.
+* Arguments : uint16_t pipe ; Pipe Number
+* Return Value : none
+*******************************************************************************/
+void usb0_function_stop_transfer (uint16_t pipe)
+{
+ uint16_t usefifo;
+ uint32_t remain;
+ uint16_t fifo;
+
+ usb0_function_set_pid_nak(pipe);
+
+ usefifo = (uint16_t)(g_usb0_function_PipeTbl[pipe] & USB_FUNCTION_FIFO_USE);
+ switch (usefifo)
+ {
+ case USB_FUNCTION_D0FIFO_USE:
+ usb0_function_clear_transaction_counter(pipe);
+ USB200.D0FIFOCTR = USB_FUNCTION_BITBCLR; /* Buffer Clear */
+ fifo = USB_FUNCTION_D0USE;
+ break;
+
+ case USB_FUNCTION_D1FIFO_USE:
+ usb0_function_clear_transaction_counter(pipe);
+ USB200.D1FIFOCTR = USB_FUNCTION_BITBCLR; /* Buffer Clear */
+ fifo = USB_FUNCTION_D1USE;
+ break;
+
+ case USB_FUNCTION_D0FIFO_DMA:
+ remain = Userdef_USB_usb0_function_stop_dma0();
+ usb0_function_dma_stop_d0(pipe, remain);
+ usb0_function_clear_transaction_counter(pipe);
+ USB200.D0FIFOCTR = USB_FUNCTION_BITBCLR; /* Buffer Clear */
+ fifo = USB_FUNCTION_D0DMA;
+ break;
+
+ case USB_FUNCTION_D1FIFO_DMA:
+ remain = Userdef_USB_usb0_function_stop_dma1();
+ usb0_function_dma_stop_d1(pipe, remain);
+ usb0_function_clear_transaction_counter(pipe);
+ USB200.D1FIFOCTR = USB_FUNCTION_BITBCLR; /* Buffer Clear */
+ fifo = USB_FUNCTION_D1DMA;
+ break;
+
+ default:
+ usb0_function_clear_transaction_counter(pipe);
+ USB200.CFIFOCTR = USB_FUNCTION_BITBCLR; /* Buffer Clear */
+ fifo = USB_FUNCTION_CUSE;
+ break;
+ }
+
+ usb0_function_set_curpipe(USB_FUNCTION_PIPE0, fifo, DEVDRV_USBF_NO, USB_FUNCTION_BITMBW_16);
+
+ /* Interrupt of pipe set is disabled */
+ usb0_function_disable_brdy_int(pipe);
+ usb0_function_disable_nrdy_int(pipe);
+ usb0_function_disable_bemp_int(pipe);
+
+ usb0_function_aclrm(pipe);
+ usb0_function_set_csclr(pipe);
+
+ if ( g_usb0_function_pipe_status[pipe] == DEVDRV_USBF_PIPE_WAIT )
+ {
+ g_usb0_function_pipe_status[pipe] = DEVDRV_USBF_PIPE_NORES;
+ }
+
+}
+
+/*******************************************************************************
+* Function Name: usb0_function_set_dfacc_d0
+* Description : Sets the DFACC setting value in D0FIFO using the transfer size.
+* Arguments : uint16_t mbw ; MBW
+* : uint16_t count ; data count
+* Return Value : DFACC Access mode
+*******************************************************************************/
+static uint16_t usb0_function_set_dfacc_d0 (uint16_t mbw, uint32_t count)
+{
+ uint16_t dfacc = 0;
+
+#ifndef __USB_FUNCTION_DF_ACC_ENABLE__
+ RZA_IO_RegWrite_16(&USB200.D0FBCFG,
+ 0,
+ USB_DnFBCFG_DFACC_SHIFT,
+ USB_DnFBCFG_DFACC);
+ RZA_IO_RegWrite_16(&USB200.D0FBCFG,
+ 0,
+ USB_DnFBCFG_TENDE_SHIFT,
+ USB_DnFBCFG_TENDE);
+ dfacc = 0;
+#else
+ if (mbw == USB_FUNCTION_BITMBW_32)
+ {
+ if ((count % 32) == 0)
+ {
+ /* 32byte transfer */
+ RZA_IO_RegWrite_16(&USB200.D0FBCFG,
+ 2,
+ USB_DnFBCFG_DFACC_SHIFT,
+ USB_DnFBCFG_DFACC);
+ RZA_IO_RegWrite_16(&USB200.D0FBCFG,
+ 0,
+ USB_DnFBCFG_TENDE_SHIFT,
+ USB_DnFBCFG_TENDE);
+ dfacc = 2;
+ }
+ else if ((count % 16) == 0)
+ {
+ /* 16byte transfer */
+ RZA_IO_RegWrite_16(&USB200.D0FBCFG,
+ 1,
+ USB_DnFBCFG_DFACC_SHIFT,
+ USB_DnFBCFG_DFACC);
+ RZA_IO_RegWrite_16(&USB200.D0FBCFG,
+ 0,
+ USB_DnFBCFG_TENDE_SHIFT,
+ USB_DnFBCFG_TENDE);
+ dfacc = 1;
+ }
+ else
+ {
+ RZA_IO_RegWrite_16(&USB200.D0FBCFG,
+ 0,
+ USB_DnFBCFG_DFACC_SHIFT,
+ USB_DnFBCFG_DFACC);
+ RZA_IO_RegWrite_16(&USB200.D0FBCFG,
+ 0,
+ USB_DnFBCFG_TENDE_SHIFT,
+ USB_DnFBCFG_TENDE);
+ dfacc = 0;
+ }
+ }
+ else if (mbw == USB_FUNCTION_BITMBW_16)
+ {
+ RZA_IO_RegWrite_16(&USB200.D0FBCFG,
+ 0,
+ USB_DnFBCFG_DFACC_SHIFT,
+ USB_DnFBCFG_DFACC);
+ RZA_IO_RegWrite_16(&USB200.D0FBCFG,
+ 0,
+ USB_DnFBCFG_TENDE_SHIFT,
+ USB_DnFBCFG_TENDE);
+ dfacc = 0;
+ }
+ else
+ {
+ RZA_IO_RegWrite_16(&USB200.D0FBCFG,
+ 0,
+ USB_DnFBCFG_DFACC_SHIFT,
+ USB_DnFBCFG_DFACC);
+ RZA_IO_RegWrite_16(&USB200.D0FBCFG,
+ 0,
+ USB_DnFBCFG_TENDE_SHIFT,
+ USB_DnFBCFG_TENDE);
+ dfacc = 0;
+ }
+#endif
+ return dfacc;
+}
+
+/*******************************************************************************
+* Function Name: usb0_function_set_dfacc_d1
+* Description : Set the DFACC setting value in D1FIFO using the transfer size.
+* Arguments : uint16_t mbw ; MBW
+* : uint16_t count ; data count
+* Return Value : DFACC Access mode
+*******************************************************************************/
+static uint16_t usb0_function_set_dfacc_d1 (uint16_t mbw, uint32_t count)
+{
+ uint16_t dfacc = 0;
+
+#ifndef __USB_FUNCTION_DF_ACC_ENABLE__
+ RZA_IO_RegWrite_16(&USB200.D1FBCFG,
+ 0,
+ USB_DnFBCFG_DFACC_SHIFT,
+ USB_DnFBCFG_DFACC);
+ RZA_IO_RegWrite_16(&USB200.D1FBCFG,
+ 0,
+ USB_DnFBCFG_TENDE_SHIFT,
+ USB_DnFBCFG_TENDE);
+ dfacc = 0;
+#else
+ if (mbw == USB_FUNCTION_BITMBW_32)
+ {
+ if ((count % 32) == 0)
+ {
+ /* 32byte transfer */
+ RZA_IO_RegWrite_16(&USB200.D1FBCFG,
+ 2,
+ USB_DnFBCFG_DFACC_SHIFT,
+ USB_DnFBCFG_DFACC);
+ RZA_IO_RegWrite_16(&USB200.D1FBCFG,
+ 0,
+ USB_DnFBCFG_TENDE_SHIFT,
+ USB_DnFBCFG_TENDE);
+ dfacc = 2;
+ }
+ else if ((count % 16) == 0)
+ {
+ /* 16byte transfer */
+ RZA_IO_RegWrite_16(&USB200.D1FBCFG,
+ 1,
+ USB_DnFBCFG_DFACC_SHIFT,
+ USB_DnFBCFG_DFACC);
+ RZA_IO_RegWrite_16(&USB200.D1FBCFG,
+ 0,
+ USB_DnFBCFG_TENDE_SHIFT,
+ USB_DnFBCFG_TENDE);
+ dfacc = 1;
+ }
+ else
+ {
+ RZA_IO_RegWrite_16(&USB200.D1FBCFG,
+ 0,
+ USB_DnFBCFG_DFACC_SHIFT,
+ USB_DnFBCFG_DFACC);
+ RZA_IO_RegWrite_16(&USB200.D1FBCFG,
+ 0,
+ USB_DnFBCFG_TENDE_SHIFT,
+ USB_DnFBCFG_TENDE);
+ dfacc = 0;
+ }
+ }
+ else if (mbw == USB_FUNCTION_BITMBW_16)
+ {
+ RZA_IO_RegWrite_16(&USB200.D1FBCFG,
+ 0,
+ USB_DnFBCFG_DFACC_SHIFT,
+ USB_DnFBCFG_DFACC);
+ RZA_IO_RegWrite_16(&USB200.D1FBCFG,
+ 0,
+ USB_DnFBCFG_TENDE_SHIFT,
+ USB_DnFBCFG_TENDE);
+ dfacc = 0;
+ }
+ else
+ {
+ RZA_IO_RegWrite_16(&USB200.D1FBCFG,
+ 0,
+ USB_DnFBCFG_DFACC_SHIFT,
+ USB_DnFBCFG_DFACC);
+ RZA_IO_RegWrite_16(&USB200.D1FBCFG,
+ 0,
+ USB_DnFBCFG_TENDE_SHIFT,
+ USB_DnFBCFG_TENDE);
+ dfacc = 0;
+ }
+#endif
+
+ return dfacc;
+}
+
+/* End of File */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/USBDevice/TARGET_RENESAS/TARGET_VK_RZ_A1H/usb0/src/common/usb0_function_dma.c Fri Apr 29 01:16:25 2016 +0100
@@ -0,0 +1,346 @@
+/*******************************************************************************
+* DISCLAIMER
+* This software is supplied by Renesas Electronics Corporation and is only
+* intended for use with Renesas products. No other uses are authorized. This
+* software is owned by Renesas Electronics Corporation and is protected under
+* all applicable laws, including copyright laws.
+* THIS SOFTWARE IS PROVIDED "AS IS" AND RENESAS MAKES NO WARRANTIES REGARDING
+* THIS SOFTWARE, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING BUT NOT
+* LIMITED TO WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE
+* AND NON-INFRINGEMENT. ALL SUCH WARRANTIES ARE EXPRESSLY DISCLAIMED.
+* TO THE MAXIMUM EXTENT PERMITTED NOT PROHIBITED BY LAW, NEITHER RENESAS
+* ELECTRONICS CORPORATION NOR ANY OF ITS AFFILIATED COMPANIES SHALL BE LIABLE
+* FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR
+* ANY REASON RELATED TO THIS SOFTWARE, EVEN IF RENESAS OR ITS AFFILIATES HAVE
+* BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
+* Renesas reserves the right, without notice, to make changes to this software
+* and to discontinue the availability of this software. By using this software,
+* you agree to the additional terms and conditions found by accessing the
+* following link:
+* http://www.renesas.com/disclaimer
+* Copyright (C) 2012 - 2014 Renesas Electronics Corporation. All rights reserved.
+*******************************************************************************/
+/*******************************************************************************
+* File Name : usb0_function_dma.c
+* $Rev: 1116 $
+* $Date:: 2014-07-09 16:29:19 +0900#$
+* Device(s) : RZ/A1H
+* Tool-Chain :
+* OS : None
+* H/W Platform :
+* Description : RZ/A1H R7S72100 USB Sample Program
+* Operation :
+* Limitations :
+*******************************************************************************/
+
+
+/*******************************************************************************
+Includes <System Includes> , "Project Includes"
+*******************************************************************************/
+#include "usb0_function.h"
+
+
+/*******************************************************************************
+Typedef definitions
+*******************************************************************************/
+
+
+/*******************************************************************************
+Macro definitions
+*******************************************************************************/
+
+
+/*******************************************************************************
+Imported global variables and functions (from other files)
+*******************************************************************************/
+
+
+/*******************************************************************************
+Exported global variables and functions (to be accessed by other files)
+*******************************************************************************/
+
+
+/*******************************************************************************
+Private global variables and functions
+*******************************************************************************/
+static void usb0_function_dmaint(uint16_t fifo);
+static void usb0_function_dmaint_buf2fifo(uint16_t pipe);
+static void usb0_function_dmaint_fifo2buf(uint16_t pipe);
+
+
+/*******************************************************************************
+* Function Name: usb0_function_dma_stop_d0
+* Description : D0FIFO DMA stop
+* Arguments : uint16_t pipe : pipe number
+* : uint32_t remain : transfer byte
+* Return Value : none
+*******************************************************************************/
+void usb0_function_dma_stop_d0 (uint16_t pipe, uint32_t remain)
+{
+ uint16_t dtln;
+ uint16_t dfacc;
+ uint16_t buffer;
+ uint16_t sds_b = 1;
+
+ dfacc = RZA_IO_RegRead_16(&USB200.D0FBCFG, USB_DnFBCFG_DFACC_SHIFT, USB_DnFBCFG_DFACC);
+
+ if (dfacc == 2)
+ {
+ sds_b = 32;
+ }
+ else if (dfacc == 1)
+ {
+ sds_b = 16;
+ }
+ else
+ {
+ if (g_usb0_function_DmaInfo[USB_FUNCTION_D0FIFO].size == 2)
+ {
+ sds_b = 4;
+ }
+ else if (g_usb0_function_DmaInfo[USB_FUNCTION_D0FIFO].size == 1)
+ {
+ sds_b = 2;
+ }
+ else
+ {
+ sds_b = 1;
+ }
+ }
+
+ if (RZA_IO_RegRead_16(&g_usb0_function_pipecfg[pipe], USB_PIPECFG_BFRE_SHIFT, USB_PIPECFG_BFRE) == 1)
+ {
+ if (g_usb0_function_pipe_status[pipe] != DEVDRV_USBF_PIPE_DONE)
+ {
+ buffer = USB200.D0FIFOCTR;
+ dtln = (buffer & USB_FUNCTION_BITDTLN);
+
+ if ((dtln % sds_b) != 0)
+ {
+ remain += (sds_b - (dtln % sds_b));
+ }
+ g_usb0_function_PipeDataSize[pipe] = (g_usb0_function_data_count[pipe] - remain);
+ g_usb0_function_data_count[pipe] = remain;
+ }
+ }
+
+ RZA_IO_RegWrite_16(&USB200.D0FIFOSEL, 0, USB_DnFIFOSEL_DREQE_SHIFT, USB_DnFIFOSEL_DREQE);
+}
+
+/*******************************************************************************
+* Function Name: usb0_function_dma_stop_d1
+* Description : D1FIFO DMA stop
+* Arguments : uint16_t pipe : pipe number
+* : uint32_t remain : transfer byte
+* Return Value : none
+*******************************************************************************/
+void usb0_function_dma_stop_d1 (uint16_t pipe, uint32_t remain)
+{
+ uint16_t dtln;
+ uint16_t dfacc;
+ uint16_t buffer;
+ uint16_t sds_b = 1;
+
+ dfacc = RZA_IO_RegRead_16(&USB200.D1FBCFG, USB_DnFBCFG_DFACC_SHIFT, USB_DnFBCFG_DFACC);
+
+ if (dfacc == 2)
+ {
+ sds_b = 32;
+ }
+ else if (dfacc == 1)
+ {
+ sds_b = 16;
+ }
+ else
+ {
+ if (g_usb0_function_DmaInfo[USB_FUNCTION_D1FIFO].size == 2)
+ {
+ sds_b = 4;
+ }
+ else if (g_usb0_function_DmaInfo[USB_FUNCTION_D1FIFO].size == 1)
+ {
+ sds_b = 2;
+ }
+ else
+ {
+ sds_b = 1;
+ }
+ }
+
+ if (RZA_IO_RegRead_16(&g_usb0_function_pipecfg[pipe], USB_PIPECFG_BFRE_SHIFT, USB_PIPECFG_BFRE) == 1)
+ {
+ if (g_usb0_function_pipe_status[pipe] != DEVDRV_USBF_PIPE_DONE)
+ {
+ buffer = USB200.D1FIFOCTR;
+ dtln = (buffer & USB_FUNCTION_BITDTLN);
+
+ if ((dtln % sds_b) != 0)
+ {
+ remain += (sds_b - (dtln % sds_b));
+ }
+ g_usb0_function_PipeDataSize[pipe] = (g_usb0_function_data_count[pipe] - remain);
+ g_usb0_function_data_count[pipe] = remain;
+ }
+ }
+
+ RZA_IO_RegWrite_16(&USB200.D1FIFOSEL, 0, USB_DnFIFOSEL_DREQE_SHIFT, USB_DnFIFOSEL_DREQE);
+}
+
+/*******************************************************************************
+* Function Name: usb0_function_dma_interrupt_d0fifo
+* Description : This function is DMA interrupt handler entry.
+* : Execute usb0_function_dmaint() after disabling DMA interrupt in this function.
+* : Disable DMA interrupt to DMAC executed when USB_FUNCTION_D0FIFO_DMA is
+* : specified by dma->fifo.
+* : Register this function as DMA complete interrupt.
+* Arguments : uint32_t int_sense ; Interrupts detection mode
+* : ; INTC_LEVEL_SENSITIVE : Level sense
+* : ; INTC_EDGE_TRIGGER : Edge trigger
+* Return Value : none
+*******************************************************************************/
+void usb0_function_dma_interrupt_d0fifo (uint32_t int_sense)
+{
+ usb0_function_dmaint(USB_FUNCTION_D0FIFO);
+ g_usb0_function_DmaStatus[USB_FUNCTION_D0FIFO] = USB_FUNCTION_DMA_READY;
+}
+
+/*******************************************************************************
+* Function Name: usb0_function_dma_interrupt_d1fifo
+* Description : This function is DMA interrupt handler entry.
+* : Execute usb0_function_dmaint() after disabling DMA interrupt in this function.
+* : Disable DMA interrupt to DMAC executed when USB_FUNCTION_D1FIFO_DMA is
+* : specified by dma->fifo.
+* : Register this function as DMA complete interrupt.
+* Arguments : uint32_t int_sense ; Interrupts detection mode
+* : ; INTC_LEVEL_SENSITIVE : Level sense
+* : ; INTC_EDGE_TRIGGER : Edge trigger
+* Return Value : none
+*******************************************************************************/
+void usb0_function_dma_interrupt_d1fifo (uint32_t int_sense)
+{
+ usb0_function_dmaint(USB_FUNCTION_D1FIFO);
+ g_usb0_function_DmaStatus[USB_FUNCTION_D1FIFO] = USB_FUNCTION_DMA_READY;
+}
+
+/*******************************************************************************
+* Function Name: usb0_function_dmaint
+* Description : This function is DMA transfer end interrupt
+* Arguments : uint16_t fifo ; fifo number
+* : ; USB_FUNCTION_D0FIFO
+* : ; USB_FUNCTION_D1FIFO
+* Return Value : none
+*******************************************************************************/
+static void usb0_function_dmaint (uint16_t fifo)
+{
+ uint16_t pipe;
+
+ pipe = g_usb0_function_DmaPipe[fifo];
+
+ if (g_usb0_function_DmaInfo[fifo].dir == USB_FUNCTION_BUF2FIFO)
+ {
+ usb0_function_dmaint_buf2fifo(pipe);
+ }
+ else
+ {
+ usb0_function_dmaint_fifo2buf(pipe);
+ }
+}
+
+/*******************************************************************************
+* Function Name: usb0_function_dmaint_fifo2buf
+* Description : Executes read completion from FIFO by DMAC.
+* Arguments : uint16_t pipe : pipe number
+* Return Value : none
+*******************************************************************************/
+static void usb0_function_dmaint_fifo2buf (uint16_t pipe)
+{
+ uint32_t remain;
+ uint16_t useport;
+
+ if (g_usb0_function_pipe_status[pipe] != DEVDRV_USBF_PIPE_DONE)
+ {
+ useport = (uint16_t)(g_usb0_function_PipeTbl[pipe] & USB_FUNCTION_FIFO_USE);
+
+ if (useport == USB_FUNCTION_D0FIFO_DMA)
+ {
+ remain = Userdef_USB_usb0_function_stop_dma0();
+ usb0_function_dma_stop_d0(pipe, remain);
+
+ if (RZA_IO_RegRead_16(&g_usb0_function_pipecfg[pipe], USB_PIPECFG_BFRE_SHIFT, USB_PIPECFG_BFRE) == 0)
+ {
+ if (g_usb0_function_DmaStatus[USB_FUNCTION_D0FIFO] == USB_FUNCTION_DMA_BUSYEND)
+ {
+ USB200.D0FIFOCTR = USB_FUNCTION_BITBCLR;
+ g_usb0_function_pipe_status[pipe] = DEVDRV_USBF_PIPE_DONE;
+ }
+ else
+ {
+ usb0_function_enable_brdy_int(pipe);
+ }
+ }
+ }
+ else
+ {
+ remain = Userdef_USB_usb0_function_stop_dma1();
+ usb0_function_dma_stop_d1(pipe, remain);
+
+ if (RZA_IO_RegRead_16(&g_usb0_function_pipecfg[pipe], USB_PIPECFG_BFRE_SHIFT, USB_PIPECFG_BFRE) == 0)
+ {
+ if (g_usb0_function_DmaStatus[USB_FUNCTION_D1FIFO] == USB_FUNCTION_DMA_BUSYEND)
+ {
+ USB200.D1FIFOCTR = USB_FUNCTION_BITBCLR;
+ g_usb0_function_pipe_status[pipe] = DEVDRV_USBF_PIPE_DONE;
+ }
+ else
+ {
+ usb0_function_enable_brdy_int(pipe);
+ }
+ }
+ }
+ }
+}
+
+/*******************************************************************************
+* Function Name: usb0_function_dmaint_buf2fifo
+* Description : Executes write completion in FIFO by DMAC.
+* Arguments : uint16_t pipe : pipe number
+* Return Value : none
+*******************************************************************************/
+static void usb0_function_dmaint_buf2fifo (uint16_t pipe)
+{
+ uint32_t remain;
+ uint16_t useport;
+
+ useport = (uint16_t)(g_usb0_function_PipeTbl[pipe] & USB_FUNCTION_FIFO_USE);
+
+ if (useport == USB_FUNCTION_D0FIFO_DMA)
+ {
+ remain = Userdef_USB_usb0_function_stop_dma0();
+ usb0_function_dma_stop_d0(pipe, remain);
+
+ if (g_usb0_function_DmaBval[USB_FUNCTION_D0FIFO] != 0)
+ {
+ RZA_IO_RegWrite_16(&USB200.D0FIFOCTR,
+ 1,
+ USB_DnFIFOCTR_BVAL_SHIFT,
+ USB_DnFIFOCTR_BVAL);
+ }
+ }
+ else
+ {
+ remain = Userdef_USB_usb0_function_stop_dma1();
+ usb0_function_dma_stop_d1(pipe, remain);
+
+ if (g_usb0_function_DmaBval[USB_FUNCTION_D1FIFO] != 0)
+ {
+ RZA_IO_RegWrite_16(&USB200.D1FIFOCTR,
+ 1,
+ USB_DnFIFOCTR_BVAL_SHIFT,
+ USB_DnFIFOCTR_BVAL);
+ }
+ }
+
+ usb0_function_enable_bemp_int(pipe);
+}
+
+/* End of File */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/USBDevice/TARGET_RENESAS/TARGET_VK_RZ_A1H/usb0/src/common/usb0_function_intrn.c Fri Apr 29 01:16:25 2016 +0100
@@ -0,0 +1,249 @@
+/*******************************************************************************
+* DISCLAIMER
+* This software is supplied by Renesas Electronics Corporation and is only
+* intended for use with Renesas products. No other uses are authorized. This
+* software is owned by Renesas Electronics Corporation and is protected under
+* all applicable laws, including copyright laws.
+* THIS SOFTWARE IS PROVIDED "AS IS" AND RENESAS MAKES NO WARRANTIES REGARDING
+* THIS SOFTWARE, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING BUT NOT
+* LIMITED TO WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE
+* AND NON-INFRINGEMENT. ALL SUCH WARRANTIES ARE EXPRESSLY DISCLAIMED.
+* TO THE MAXIMUM EXTENT PERMITTED NOT PROHIBITED BY LAW, NEITHER RENESAS
+* ELECTRONICS CORPORATION NOR ANY OF ITS AFFILIATED COMPANIES SHALL BE LIABLE
+* FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR
+* ANY REASON RELATED TO THIS SOFTWARE, EVEN IF RENESAS OR ITS AFFILIATES HAVE
+* BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
+* Renesas reserves the right, without notice, to make changes to this software
+* and to discontinue the availability of this software. By using this software,
+* you agree to the additional terms and conditions found by accessing the
+* following link:
+* http://www.renesas.com/disclaimer
+* Copyright (C) 2012 - 2014 Renesas Electronics Corporation. All rights reserved.
+*******************************************************************************/
+/*******************************************************************************
+* File Name : usb0_function_intrn.c
+* $Rev: 1116 $
+* $Date:: 2014-07-09 16:29:19 +0900#$
+* Device(s) : RZ/A1H
+* Tool-Chain :
+* OS : None
+* H/W Platform :
+* Description : RZ/A1H R7S72100 USB Sample Program
+* Operation :
+* Limitations :
+*******************************************************************************/
+
+
+/*******************************************************************************
+Includes <System Includes> , "Project Includes"
+*******************************************************************************/
+#include "usb0_function.h"
+
+
+/*******************************************************************************
+Typedef definitions
+*******************************************************************************/
+
+
+/*******************************************************************************
+Macro definitions
+*******************************************************************************/
+
+
+/*******************************************************************************
+Imported global variables and functions (from other files)
+*******************************************************************************/
+
+
+/*******************************************************************************
+Exported global variables and functions (to be accessed by other files)
+*******************************************************************************/
+
+
+/*******************************************************************************
+Private global variables and functions
+*******************************************************************************/
+
+
+/*******************************************************************************
+* Function Name: usb0_function_brdy_int
+* Description : Executes BRDY interrupt(USB_FUNCTION_PIPE1-9).
+* : According to the pipe that interrupt is generated in,
+* : reads/writes buffer allocated in the pipe.
+* : This function is executed in the BRDY interrupt handler.
+* : This function clears BRDY interrupt status and BEMP interrupt
+* : status.
+* Arguments : uint16_t Status ; BRDYSTS Register Value
+* : uint16_t Int_enbl ; BRDYENB Register Value
+* Return Value : none
+*******************************************************************************/
+#if 0
+void usb0_function_brdy_int (uint16_t status, uint16_t int_enb)
+{
+ uint32_t int_sense = 0;
+ uint16_t pipe;
+ uint16_t pipebit;
+
+ for (pipe = USB_FUNCTION_PIPE1; pipe <= USB_FUNCTION_MAX_PIPE_NO; pipe++)
+ {
+ pipebit = g_usb0_function_bit_set[pipe];
+
+ if ((status & pipebit) && (int_enb & pipebit))
+ {
+ USB200.BRDYSTS = (uint16_t)~pipebit;
+ USB200.BEMPSTS = (uint16_t)~pipebit;
+ if ((g_usb0_function_PipeTbl[pipe] & USB_FUNCTION_FIFO_USE) == USB_FUNCTION_D0FIFO_DMA)
+ {
+ if (g_usb0_function_DmaStatus[USB_FUNCTION_D0FIFO] != USB_FUNCTION_DMA_READY)
+ {
+ usb0_function_dma_interrupt_d0fifo(int_sense);
+ }
+
+ if (RZA_IO_RegRead_16(&g_usb0_function_pipecfg[pipe], USB_PIPECFG_BFRE_SHIFT, USB_PIPECFG_BFRE) == 0)
+ {
+ usb0_function_read_dma(pipe);
+ usb0_function_disable_brdy_int(pipe);
+ }
+ else
+ {
+ USB200.D0FIFOCTR = USB_FUNCTION_BITBCLR;
+ g_usb0_function_pipe_status[pipe] = DEVDRV_USBF_PIPE_DONE;
+ }
+ }
+ else if ((g_usb0_function_PipeTbl[pipe] & USB_FUNCTION_FIFO_USE) == USB_FUNCTION_D1FIFO_DMA)
+ {
+ if (g_usb0_function_DmaStatus[USB_FUNCTION_D1FIFO] != USB_FUNCTION_DMA_READY)
+ {
+ usb0_function_dma_interrupt_d1fifo(int_sense);
+ }
+
+ if (RZA_IO_RegRead_16(&g_usb0_function_pipecfg[pipe], USB_PIPECFG_BFRE_SHIFT, USB_PIPECFG_BFRE) == 0)
+ {
+ usb0_function_read_dma(pipe);
+ usb0_function_disable_brdy_int(pipe);
+ }
+ else
+ {
+ USB200.D1FIFOCTR = USB_FUNCTION_BITBCLR;
+ g_usb0_function_pipe_status[pipe] = DEVDRV_USBF_PIPE_DONE;
+ }
+ }
+ else
+ {
+ if (RZA_IO_RegRead_16(&g_usb0_function_pipecfg[pipe], USB_PIPECFG_DIR_SHIFT, USB_PIPECFG_DIR) == 0)
+ {
+ usb0_function_read_buffer(pipe);
+ }
+ else
+ {
+ usb0_function_write_buffer(pipe);
+ }
+ }
+ }
+ }
+}
+#endif
+
+/*******************************************************************************
+* Function Name: usb0_function_nrdy_int
+* Description : Executes NRDY interrupt(USB_FUNCTION_PIPE1-9).
+* : Checks NRDY interrupt cause by PID. When the cause if STALL,
+* : regards the pipe state as STALL and ends the processing.
+* : Then the cause is not STALL, increments the error count to
+* : communicate again. When the error count is 3, determines
+* : the pipe state as DEVDRV_USBF_PIPE_NORES and ends the processing.
+* : This function is executed in the NRDY interrupt handler.
+* : This function clears NRDY interrupt status.
+* Arguments : uint16_t status ; NRDYSTS Register Value
+* : uint16_t int_enb ; NRDYENB Register Value
+* Return Value : none
+*******************************************************************************/
+void usb0_function_nrdy_int (uint16_t status, uint16_t int_enb)
+{
+ uint16_t pid;
+ uint16_t pipe;
+ uint16_t bitcheck;
+
+ bitcheck = (uint16_t)(status & int_enb);
+
+ USB200.NRDYSTS = (uint16_t)~status;
+
+ for (pipe = USB_FUNCTION_PIPE1; pipe <= USB_FUNCTION_MAX_PIPE_NO; pipe++)
+ {
+ if ((bitcheck&g_usb0_function_bit_set[pipe]) == g_usb0_function_bit_set[pipe])
+ {
+ if (RZA_IO_RegRead_16(&USB200.SYSCFG0, USB_SYSCFG_DCFM_SHIFT, USB_SYSCFG_DCFM) == 1)
+ {
+ if (g_usb0_function_pipe_status[pipe] == DEVDRV_USBF_PIPE_WAIT)
+ {
+ pid = usb0_function_get_pid(pipe);
+ if ((pid == DEVDRV_USBF_PID_STALL) || (pid == DEVDRV_USBF_PID_STALL2))
+ {
+ g_usb0_function_pipe_status[pipe] = DEVDRV_USBF_PIPE_STALL;
+ }
+ else
+ {
+ g_usb0_function_PipeIgnore[pipe]++;
+ if (g_usb0_function_PipeIgnore[pipe] == 3)
+ {
+ g_usb0_function_pipe_status[pipe] = DEVDRV_USBF_PIPE_NORES;
+ }
+ else
+ {
+ usb0_function_set_pid_buf(pipe);
+ }
+ }
+ }
+ }
+ else
+ {
+ /* USB Function */
+ }
+ }
+ }
+}
+
+/*******************************************************************************
+* Function Name: usb0_function_bemp_int
+* Description : Executes BEMP interrupt(USB_FUNCTION_PIPE1-9).
+* Arguments : uint16_t status ; BEMPSTS Register Value
+* : uint16_t int_enb ; BEMPENB Register Value
+* Return Value : none
+*******************************************************************************/
+void usb0_function_bemp_int (uint16_t status, uint16_t int_enb)
+{
+ uint16_t pid;
+ uint16_t pipe;
+ uint16_t bitcheck;
+ uint16_t inbuf;
+
+ bitcheck = (uint16_t)(status & int_enb);
+
+ USB200.BEMPSTS = (uint16_t)~status;
+
+ for (pipe = USB_FUNCTION_PIPE1; pipe <= USB_FUNCTION_MAX_PIPE_NO; pipe++)
+ {
+ if ((bitcheck&g_usb0_function_bit_set[pipe]) == g_usb0_function_bit_set[pipe])
+ {
+ pid = usb0_function_get_pid(pipe);
+
+ if ((pid == DEVDRV_USBF_PID_STALL) || (pid == DEVDRV_USBF_PID_STALL2))
+ {
+ g_usb0_function_pipe_status[pipe] = DEVDRV_USBF_PIPE_STALL;
+ }
+ else
+ {
+ inbuf = usb0_function_get_inbuf(pipe);
+
+ if (inbuf == 0)
+ {
+ usb0_function_disable_bemp_int(pipe);
+ usb0_function_set_pid_nak(pipe);
+ g_usb0_function_pipe_status[pipe] = DEVDRV_USBF_PIPE_DONE;
+ }
+ }
+ }
+ }
+}
+
+/* End of File */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/USBDevice/TARGET_RENESAS/TARGET_VK_RZ_A1H/usb0/src/common/usb0_function_lib.c Fri Apr 29 01:16:25 2016 +0100
@@ -0,0 +1,2026 @@
+/*******************************************************************************
+* DISCLAIMER
+* This software is supplied by Renesas Electronics Corporation and is only
+* intended for use with Renesas products. No other uses are authorized. This
+* software is owned by Renesas Electronics Corporation and is protected under
+* all applicable laws, including copyright laws.
+* THIS SOFTWARE IS PROVIDED "AS IS" AND RENESAS MAKES NO WARRANTIES REGARDING
+* THIS SOFTWARE, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING BUT NOT
+* LIMITED TO WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE
+* AND NON-INFRINGEMENT. ALL SUCH WARRANTIES ARE EXPRESSLY DISCLAIMED.
+* TO THE MAXIMUM EXTENT PERMITTED NOT PROHIBITED BY LAW, NEITHER RENESAS
+* ELECTRONICS CORPORATION NOR ANY OF ITS AFFILIATED COMPANIES SHALL BE LIABLE
+* FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR
+* ANY REASON RELATED TO THIS SOFTWARE, EVEN IF RENESAS OR ITS AFFILIATES HAVE
+* BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
+* Renesas reserves the right, without notice, to make changes to this software
+* and to discontinue the availability of this software. By using this software,
+* you agree to the additional terms and conditions found by accessing the
+* following link:
+* http://www.renesas.com/disclaimer
+* Copyright (C) 2012 - 2014 Renesas Electronics Corporation. All rights reserved.
+*******************************************************************************/
+/*******************************************************************************
+* File Name : usb0_function_lib.c
+* $Rev: 1116 $
+* $Date:: 2014-07-09 16:29:19 +0900#$
+* Device(s) : RZ/A1H
+* Tool-Chain :
+* OS : None
+* H/W Platform :
+* Description : RZ/A1H R7S72100 USB Sample Program
+* Operation :
+* Limitations :
+*******************************************************************************/
+
+
+/*******************************************************************************
+Includes <System Includes> , "Project Includes"
+*******************************************************************************/
+#include "usb0_function.h"
+
+
+/*******************************************************************************
+Typedef definitions
+*******************************************************************************/
+
+
+/*******************************************************************************
+Macro definitions
+*******************************************************************************/
+
+
+/*******************************************************************************
+Imported global variables and functions (from other files)
+*******************************************************************************/
+
+
+/*******************************************************************************
+Exported global variables and functions (to be accessed by other files)
+*******************************************************************************/
+
+
+/*******************************************************************************
+Private global variables and functions
+*******************************************************************************/
+
+
+/*******************************************************************************
+* Function Name: usb0_function_enable_brdy_int
+* Description : Enables BRDY interrupt in the pipe spceified by the argument.
+* : Disables BEMP/NRDY/BRDY interrupts in all pipes before enabling
+* : BRDY. Enables BRDY interrupt in the pipe specified by the argument
+* : in the disabled status. After enabling BRDY, recover all
+* : BEMP/NRDY/BRDY disabled/enabled status.
+* Arguments : uint16_t pipe ; pipe Number
+* Return Value : none
+*******************************************************************************/
+void usb0_function_enable_brdy_int (uint16_t pipe)
+{
+ /* enable brdy interrupt */
+ USB200.BRDYENB |= (uint16_t)g_usb0_function_bit_set[pipe];
+}
+
+/*******************************************************************************
+* Function Name: usb0_function_disable_brdy_int
+* Description : Disables BRDY interrupt in the pipe spceified by the argument.
+* : Disables BEMP/NRDY/BRDY interrupts in all pipes before disabling
+* : BRDY. Enables BRDY interrupt in the pipe specified by the argument
+* : in the disabled status. After disabling BRDY, recover all
+* : BEMP/NRDY/BRDY disabled/enabled status.
+* Arguments : uint16_t pipe ; pipe Number
+* Return Value : none
+*******************************************************************************/
+void usb0_function_disable_brdy_int (uint16_t pipe)
+{
+ /* disable brdy interrupt */
+ USB200.BRDYENB &= (uint16_t)~(g_usb0_function_bit_set[pipe]);
+}
+
+/*******************************************************************************
+* Function Name: usb0_function_clear_brdy_sts
+* Description : Clear BRDY interrupt status in the pipe spceified by the argument.
+* Arguments : uint16_t pipe ; pipe Number
+* Return Value : none
+*******************************************************************************/
+void usb0_function_clear_brdy_sts (uint16_t pipe)
+{
+ /* clear brdy status */
+ USB200.BRDYSTS = (uint16_t)~(g_usb0_function_bit_set[pipe]);
+}
+
+/*******************************************************************************
+* Function Name: usb0_function_enable_bemp_int
+* Description : Enables BEMP interrupt in the pipe spceified by the argument.
+* : Disables BEMP/NRDY/BRDY interrupts in all pipes before enabling
+* : BEMP. Enables BEMP interrupt in the pipe specified by the argument
+* : in the disabled status. After enabling BEMP, recover all
+* : BEMP/NRDY/BRDY disabled/enabled status.
+* Arguments : uint16_t pipe ; pipe Number
+* Return Value : none
+*******************************************************************************/
+void usb0_function_enable_bemp_int (uint16_t pipe)
+{
+ /* enable bemp interrupt */
+ USB200.BEMPENB |= (uint16_t)g_usb0_function_bit_set[pipe];
+}
+
+/*******************************************************************************
+* Function Name: usb0_function_disable_bemp_int
+* Description : Disables BEMP interrupt in the pipe spceified by the argument.
+* : Disables BEMP/NRDY/BRDY interrupts in all pipes before disabling
+* : BEMP. Enables BEMP interrupt in the pipe specified by the argument
+* : in the disabled status. After enabling BEMP, recover all
+* : BEMP/NRDY/BRDY disabled/enabled status.
+* Arguments : uint16_t pipe ; pipe Number
+* Return Value : none
+*******************************************************************************/
+void usb0_function_disable_bemp_int (uint16_t pipe)
+{
+ /* disable bemp interrupt */
+ USB200.BEMPENB &= (uint16_t)~(g_usb0_function_bit_set[pipe]);
+}
+
+/*******************************************************************************
+* Function Name: usb0_function_clear_bemp_sts
+* Description : Clear BEMP interrupt status in the pipe spceified by the argument.
+* Arguments : uint16_t pipe ; pipe Number
+* Return Value : none
+*******************************************************************************/
+void usb0_function_clear_bemp_sts (uint16_t pipe)
+{
+ /* clear bemp status */
+ USB200.BEMPSTS = (uint16_t)~(g_usb0_function_bit_set[pipe]);
+}
+
+/*******************************************************************************
+* Function Name: usb0_function_enable_nrdy_int
+* Description : Enables NRDY interrupt in the pipe spceified by the argument.
+* : Disables BEMP/NRDY/BRDY interrupts in all pipes before enabling
+* : NRDY. Enables NRDY interrupt in the pipe specified by the argument
+* : in the disabled status. After enabling NRDY, recover all
+* : BEMP/NRDY/BRDY disabled/enabled status.
+* Arguments : uint16_t pipe ; pipe Number
+* Return Value : none
+*******************************************************************************/
+void usb0_function_enable_nrdy_int (uint16_t pipe)
+{
+ /* enable nrdy interrupt */
+ USB200.NRDYENB |= (uint16_t)g_usb0_function_bit_set[pipe];
+}
+
+/*******************************************************************************
+* Function Name: usb0_function_disable_nrdy_int
+* Description : Disables NRDY interrupt in the pipe spceified by the argument.
+* : Disables BEMP/NRDY/BRDY interrupts in all pipes before disabling
+* : NRDY. Disables NRDY interrupt in the pipe specified by the argument
+* : in the disabled status. After disabling NRDY, recover all
+* : BEMP/NRDY/BRDY disabled/enabled status.
+* Arguments : uint16_t pipe ; pipe Number
+* Return Value : none
+*******************************************************************************/
+void usb0_function_disable_nrdy_int (uint16_t pipe)
+{
+ /* disable nrdy interrupt */
+ USB200.NRDYENB &= (uint16_t)~(g_usb0_function_bit_set[pipe]);
+}
+
+/*******************************************************************************
+* Function Name: usb0_function_clear_nrdy_sts
+* Description : Clear NRDY interrupt status in the pipe spceified by the argument.
+* Arguments : uint16_t pipe ; pipe Number
+* Return Value : none
+*******************************************************************************/
+void usb0_function_clear_nrdy_sts (uint16_t pipe)
+{
+ /* clear nrdy status */
+ USB200.NRDYSTS = (uint16_t)~(g_usb0_function_bit_set[pipe]);
+}
+
+/*******************************************************************************
+* Function Name: usb0_function_is_hispeed
+* Description : Returns the result of USB reset hand shake (RHST) as
+* : return value.
+* Arguments : none
+* Return Value : USB_FUNCTION_HIGH_SPEED ; Hi-Speed
+* : USB_FUNCTION_FULL_SPEED ; Full-Speed
+* : LOW_SPEED ; Low-Speed
+* : USB_FUNCTION_NON_SPEED ; error
+*******************************************************************************/
+uint16_t usb0_function_is_hispeed (void)
+{
+ uint16_t rhst;
+ uint16_t speed;
+
+ rhst = RZA_IO_RegRead_16(&USB200.DVSTCTR0, USB_DVSTCTR0_RHST_SHIFT, USB_DVSTCTR0_RHST);
+
+ if (rhst == USB_FUNCTION_HSMODE)
+ {
+ speed = USB_FUNCTION_HIGH_SPEED;
+ }
+ else if (rhst == USB_FUNCTION_FSMODE)
+ {
+ speed = USB_FUNCTION_FULL_SPEED;
+ }
+ else if (rhst == USB_FUNCTION_LSMODE)
+ {
+ speed = USB_FUNCTION_LOW_SPEED;
+ }
+ else
+ {
+ speed = USB_FUNCTION_NON_SPEED;
+ }
+
+ return speed;
+}
+
+/*******************************************************************************
+* Function Name: usb0_function_is_hispeed_enable
+* Description : Returns the USB High-Speed connection enabled status as
+* : return value.
+* Arguments : none
+* Return Value : DEVDRV_USBF_YES : Hi-Speed Enable
+* : DEVDRV_USBF_NO : Hi-Speed Disable
+*******************************************************************************/
+uint16_t usb0_function_is_hispeed_enable (void)
+{
+ uint16_t ret;
+
+ ret = DEVDRV_USBF_NO;
+
+ if (RZA_IO_RegRead_16(&USB200.SYSCFG0, USB_SYSCFG_HSE_SHIFT, USB_SYSCFG_HSE) == 1)
+ {
+ ret = DEVDRV_USBF_YES;
+ }
+
+ return ret;
+}
+
+/*******************************************************************************
+* Function Name: usb0_function_set_pid_buf
+* Description : Enables communicaqtion in the pipe specified by the argument
+* : (BUF).
+* Arguments : uint16_t pipe ; pipe Number
+* Return Value : none
+*******************************************************************************/
+void usb0_function_set_pid_buf (uint16_t pipe)
+{
+ uint16_t pid;
+
+ pid = usb0_function_get_pid(pipe);
+
+ if (pid == DEVDRV_USBF_PID_STALL2)
+ {
+ usb0_function_set_pid_nak(pipe);
+ }
+
+ switch (pipe)
+ {
+ case USB_FUNCTION_PIPE0:
+ RZA_IO_RegWrite_16(&USB200.DCPCTR,
+ DEVDRV_USBF_PID_BUF,
+ USB_DCPCTR_PID_SHIFT,
+ USB_DCPCTR_PID);
+ break;
+
+ case USB_FUNCTION_PIPE1:
+ RZA_IO_RegWrite_16(&USB200.PIPE1CTR,
+ DEVDRV_USBF_PID_BUF,
+ USB_PIPEnCTR_1_5_PID_SHIFT,
+ USB_PIPEnCTR_1_5_PID);
+ break;
+
+ case USB_FUNCTION_PIPE2:
+ RZA_IO_RegWrite_16(&USB200.PIPE2CTR,
+ DEVDRV_USBF_PID_BUF,
+ USB_PIPEnCTR_1_5_PID_SHIFT,
+ USB_PIPEnCTR_1_5_PID);
+ break;
+
+ case USB_FUNCTION_PIPE3:
+ RZA_IO_RegWrite_16(&USB200.PIPE3CTR,
+ DEVDRV_USBF_PID_BUF,
+ USB_PIPEnCTR_1_5_PID_SHIFT,
+ USB_PIPEnCTR_1_5_PID);
+ break;
+
+ case USB_FUNCTION_PIPE4:
+ RZA_IO_RegWrite_16(&USB200.PIPE4CTR,
+ DEVDRV_USBF_PID_BUF,
+ USB_PIPEnCTR_1_5_PID_SHIFT,
+ USB_PIPEnCTR_1_5_PID);
+ break;
+
+ case USB_FUNCTION_PIPE5:
+ RZA_IO_RegWrite_16(&USB200.PIPE5CTR,
+ DEVDRV_USBF_PID_BUF,
+ USB_PIPEnCTR_1_5_PID_SHIFT,
+ USB_PIPEnCTR_1_5_PID);
+ break;
+
+ case USB_FUNCTION_PIPE6:
+ RZA_IO_RegWrite_16(&USB200.PIPE6CTR,
+ DEVDRV_USBF_PID_BUF,
+ USB_PIPEnCTR_6_8_PID_SHIFT,
+ USB_PIPEnCTR_6_8_PID);
+ break;
+
+ case USB_FUNCTION_PIPE7:
+ RZA_IO_RegWrite_16(&USB200.PIPE7CTR,
+ DEVDRV_USBF_PID_BUF,
+ USB_PIPEnCTR_6_8_PID_SHIFT,
+ USB_PIPEnCTR_6_8_PID);
+ break;
+
+ case USB_FUNCTION_PIPE8:
+ RZA_IO_RegWrite_16(&USB200.PIPE8CTR,
+ DEVDRV_USBF_PID_BUF,
+ USB_PIPEnCTR_6_8_PID_SHIFT,
+ USB_PIPEnCTR_6_8_PID);
+ break;
+
+ case USB_FUNCTION_PIPE9:
+ RZA_IO_RegWrite_16(&USB200.PIPE9CTR,
+ DEVDRV_USBF_PID_BUF,
+ USB_PIPEnCTR_9_PID_SHIFT,
+ USB_PIPEnCTR_9_PID);
+ break;
+
+ case USB_FUNCTION_PIPEA:
+ RZA_IO_RegWrite_16(&USB200.PIPEACTR,
+ DEVDRV_USBF_PID_BUF,
+ USB_PIPEnCTR_A_F_PID_SHIFT,
+ USB_PIPEnCTR_A_F_PID);
+ break;
+
+ case USB_FUNCTION_PIPEB:
+ RZA_IO_RegWrite_16(&USB200.PIPEBCTR,
+ DEVDRV_USBF_PID_BUF,
+ USB_PIPEnCTR_A_F_PID_SHIFT,
+ USB_PIPEnCTR_A_F_PID);
+ break;
+
+ case USB_FUNCTION_PIPEC:
+ RZA_IO_RegWrite_16(&USB200.PIPECCTR,
+ DEVDRV_USBF_PID_BUF,
+ USB_PIPEnCTR_A_F_PID_SHIFT,
+ USB_PIPEnCTR_A_F_PID);
+ break;
+
+ case USB_FUNCTION_PIPED:
+ RZA_IO_RegWrite_16(&USB200.PIPEDCTR,
+ DEVDRV_USBF_PID_BUF,
+ USB_PIPEnCTR_A_F_PID_SHIFT,
+ USB_PIPEnCTR_A_F_PID);
+ break;
+
+ case USB_FUNCTION_PIPEE:
+ RZA_IO_RegWrite_16(&USB200.PIPEECTR,
+ DEVDRV_USBF_PID_BUF,
+ USB_PIPEnCTR_A_F_PID_SHIFT,
+ USB_PIPEnCTR_A_F_PID);
+ break;
+
+ case USB_FUNCTION_PIPEF:
+ RZA_IO_RegWrite_16(&USB200.PIPEFCTR,
+ DEVDRV_USBF_PID_BUF,
+ USB_PIPEnCTR_A_F_PID_SHIFT,
+ USB_PIPEnCTR_A_F_PID);
+ break;
+
+ default:
+ break;
+ }
+}
+
+/*******************************************************************************
+* Function Name: usb0_function_set_pid_nak
+* Description : Disables communication (NAK) in the pipe specified by the argument.
+* : When the pipe status was enabling communication (BUF) before
+* : executing before executing this function, waits in the software
+* : until the pipe becomes ready after setting disabled.
+* Arguments : uint16_t pipe ; pipe Number
+* Return Value : none
+*******************************************************************************/
+void usb0_function_set_pid_nak (uint16_t pipe)
+{
+ uint16_t pid;
+ uint16_t pbusy;
+ uint32_t loop;
+
+ pid = usb0_function_get_pid(pipe);
+
+ if (pid == DEVDRV_USBF_PID_STALL2)
+ {
+ usb0_function_set_pid_stall(pipe);
+ }
+
+ switch (pipe)
+ {
+ case USB_FUNCTION_PIPE0:
+ RZA_IO_RegWrite_16(&USB200.DCPCTR,
+ DEVDRV_USBF_PID_NAK,
+ USB_DCPCTR_PID_SHIFT,
+ USB_DCPCTR_PID);
+ break;
+
+ case USB_FUNCTION_PIPE1:
+ RZA_IO_RegWrite_16(&USB200.PIPE1CTR,
+ DEVDRV_USBF_PID_NAK,
+ USB_PIPEnCTR_1_5_PID_SHIFT,
+ USB_PIPEnCTR_1_5_PID);
+ break;
+
+ case USB_FUNCTION_PIPE2:
+ RZA_IO_RegWrite_16(&USB200.PIPE2CTR,
+ DEVDRV_USBF_PID_NAK,
+ USB_PIPEnCTR_1_5_PID_SHIFT,
+ USB_PIPEnCTR_1_5_PID);
+ break;
+
+ case USB_FUNCTION_PIPE3:
+ RZA_IO_RegWrite_16(&USB200.PIPE3CTR,
+ DEVDRV_USBF_PID_NAK,
+ USB_PIPEnCTR_1_5_PID_SHIFT,
+ USB_PIPEnCTR_1_5_PID);
+ break;
+
+ case USB_FUNCTION_PIPE4:
+ RZA_IO_RegWrite_16(&USB200.PIPE4CTR,
+ DEVDRV_USBF_PID_NAK,
+ USB_PIPEnCTR_1_5_PID_SHIFT,
+ USB_PIPEnCTR_1_5_PID);
+ break;
+
+ case USB_FUNCTION_PIPE5:
+ RZA_IO_RegWrite_16(&USB200.PIPE5CTR,
+ DEVDRV_USBF_PID_NAK,
+ USB_PIPEnCTR_1_5_PID_SHIFT,
+ USB_PIPEnCTR_1_5_PID);
+ break;
+
+ case USB_FUNCTION_PIPE6:
+ RZA_IO_RegWrite_16(&USB200.PIPE6CTR,
+ DEVDRV_USBF_PID_NAK,
+ USB_PIPEnCTR_6_8_PID_SHIFT,
+ USB_PIPEnCTR_6_8_PID);
+ break;
+
+ case USB_FUNCTION_PIPE7:
+ RZA_IO_RegWrite_16(&USB200.PIPE7CTR,
+ DEVDRV_USBF_PID_NAK,
+ USB_PIPEnCTR_6_8_PID_SHIFT,
+ USB_PIPEnCTR_6_8_PID);
+ break;
+
+ case USB_FUNCTION_PIPE8:
+ RZA_IO_RegWrite_16(&USB200.PIPE8CTR,
+ DEVDRV_USBF_PID_NAK,
+ USB_PIPEnCTR_6_8_PID_SHIFT,
+ USB_PIPEnCTR_6_8_PID);
+ break;
+
+ case USB_FUNCTION_PIPE9:
+ RZA_IO_RegWrite_16(&USB200.PIPE9CTR,
+ DEVDRV_USBF_PID_NAK,
+ USB_PIPEnCTR_9_PID_SHIFT,
+ USB_PIPEnCTR_9_PID);
+ break;
+
+ case USB_FUNCTION_PIPEA:
+ RZA_IO_RegWrite_16(&USB200.PIPEACTR,
+ DEVDRV_USBF_PID_NAK,
+ USB_PIPEnCTR_A_F_PID_SHIFT,
+ USB_PIPEnCTR_A_F_PID);
+ break;
+
+ case USB_FUNCTION_PIPEB:
+ RZA_IO_RegWrite_16(&USB200.PIPEBCTR,
+ DEVDRV_USBF_PID_NAK,
+ USB_PIPEnCTR_A_F_PID_SHIFT,
+ USB_PIPEnCTR_A_F_PID);
+ break;
+
+ case USB_FUNCTION_PIPEC:
+ RZA_IO_RegWrite_16(&USB200.PIPECCTR,
+ DEVDRV_USBF_PID_NAK,
+ USB_PIPEnCTR_A_F_PID_SHIFT,
+ USB_PIPEnCTR_A_F_PID);
+ break;
+
+ case USB_FUNCTION_PIPED:
+ RZA_IO_RegWrite_16(&USB200.PIPEDCTR,
+ DEVDRV_USBF_PID_NAK,
+ USB_PIPEnCTR_A_F_PID_SHIFT,
+ USB_PIPEnCTR_A_F_PID);
+ break;
+
+ case USB_FUNCTION_PIPEE:
+ RZA_IO_RegWrite_16(&USB200.PIPEECTR,
+ DEVDRV_USBF_PID_NAK,
+ USB_PIPEnCTR_A_F_PID_SHIFT,
+ USB_PIPEnCTR_A_F_PID);
+ break;
+
+ case USB_FUNCTION_PIPEF:
+ RZA_IO_RegWrite_16(&USB200.PIPEFCTR,
+ DEVDRV_USBF_PID_NAK,
+ USB_PIPEnCTR_A_F_PID_SHIFT,
+ USB_PIPEnCTR_A_F_PID);
+ break;
+
+ default:
+ break;
+ }
+
+ if (pid == DEVDRV_USBF_PID_BUF)
+ {
+ for (loop = 0; loop < 200; loop++)
+ {
+ switch (pipe)
+ {
+ case USB_FUNCTION_PIPE0:
+ pbusy = RZA_IO_RegRead_16(&USB200.DCPCTR,
+ USB_DCPCTR_PBUSY_SHIFT,
+ USB_DCPCTR_PBUSY);
+ break;
+
+ case USB_FUNCTION_PIPE1:
+ pbusy = RZA_IO_RegRead_16(&USB200.PIPE1CTR,
+ USB_PIPEnCTR_1_5_PBUSY_SHIFT,
+ USB_PIPEnCTR_1_5_PBUSY);
+ break;
+
+ case USB_FUNCTION_PIPE2:
+ pbusy = RZA_IO_RegRead_16(&USB200.PIPE2CTR,
+ USB_PIPEnCTR_1_5_PBUSY_SHIFT,
+ USB_PIPEnCTR_1_5_PBUSY);
+ break;
+
+ case USB_FUNCTION_PIPE3:
+ pbusy = RZA_IO_RegRead_16(&USB200.PIPE3CTR,
+ USB_PIPEnCTR_1_5_PBUSY_SHIFT,
+ USB_PIPEnCTR_1_5_PBUSY);
+ break;
+
+ case USB_FUNCTION_PIPE4:
+ pbusy = RZA_IO_RegRead_16(&USB200.PIPE4CTR,
+ USB_PIPEnCTR_1_5_PBUSY_SHIFT,
+ USB_PIPEnCTR_1_5_PBUSY);
+ break;
+
+ case USB_FUNCTION_PIPE5:
+ pbusy = RZA_IO_RegRead_16(&USB200.PIPE5CTR,
+ USB_PIPEnCTR_1_5_PBUSY_SHIFT,
+ USB_PIPEnCTR_1_5_PBUSY);
+ break;
+
+ case USB_FUNCTION_PIPE6:
+ pbusy = RZA_IO_RegRead_16(&USB200.PIPE6CTR,
+ USB_PIPEnCTR_6_8_PBUSY_SHIFT,
+ USB_PIPEnCTR_6_8_PBUSY);
+ break;
+
+ case USB_FUNCTION_PIPE7:
+ pbusy = RZA_IO_RegRead_16(&USB200.PIPE7CTR,
+ USB_PIPEnCTR_6_8_PBUSY_SHIFT,
+ USB_PIPEnCTR_6_8_PBUSY);
+ break;
+
+ case USB_FUNCTION_PIPE8:
+ pbusy = RZA_IO_RegRead_16(&USB200.PIPE8CTR,
+ USB_PIPEnCTR_6_8_PBUSY_SHIFT,
+ USB_PIPEnCTR_6_8_PBUSY);
+ break;
+
+ case USB_FUNCTION_PIPE9:
+ pbusy = RZA_IO_RegRead_16(&USB200.PIPE9CTR,
+ USB_PIPEnCTR_9_PBUSY_SHIFT,
+ USB_PIPEnCTR_9_PBUSY);
+ break;
+
+ case USB_FUNCTION_PIPEA:
+ pbusy = RZA_IO_RegRead_16(&USB200.PIPEACTR,
+ USB_PIPEnCTR_A_F_PBUSY_SHIFT,
+ USB_PIPEnCTR_A_F_PBUSY);
+ break;
+
+ case USB_FUNCTION_PIPEB:
+ pbusy = RZA_IO_RegRead_16(&USB200.PIPEBCTR,
+ USB_PIPEnCTR_A_F_PBUSY_SHIFT,
+ USB_PIPEnCTR_A_F_PBUSY);
+ break;
+
+ case USB_FUNCTION_PIPEC:
+ pbusy = RZA_IO_RegRead_16(&USB200.PIPECCTR,
+ USB_PIPEnCTR_A_F_PBUSY_SHIFT,
+ USB_PIPEnCTR_A_F_PBUSY);
+ break;
+
+ case USB_FUNCTION_PIPED:
+ pbusy = RZA_IO_RegRead_16(&USB200.PIPEDCTR,
+ USB_PIPEnCTR_A_F_PBUSY_SHIFT,
+ USB_PIPEnCTR_A_F_PBUSY);
+ break;
+
+ case USB_FUNCTION_PIPEE:
+ pbusy = RZA_IO_RegRead_16(&USB200.PIPEECTR,
+ USB_PIPEnCTR_A_F_PBUSY_SHIFT,
+ USB_PIPEnCTR_A_F_PBUSY);
+ break;
+
+ case USB_FUNCTION_PIPEF:
+ pbusy = RZA_IO_RegRead_16(&USB200.PIPEFCTR,
+ USB_PIPEnCTR_A_F_PBUSY_SHIFT,
+ USB_PIPEnCTR_A_F_PBUSY);
+ break;
+
+ default:
+ pbusy = 1;
+ break;
+ }
+
+ if (pbusy == 0)
+ {
+ break;
+ }
+ Userdef_USB_usb0_function_delay_500ns();
+ }
+ }
+}
+
+/*******************************************************************************
+* Function Name: usb0_function_set_pid_stall
+* Description : Disables communication (STALL) in the pipe specified by the
+* : argument.
+* Arguments : uint16_t pipe ; pipe Number
+* Return Value : none
+*******************************************************************************/
+void usb0_function_set_pid_stall (uint16_t pipe)
+{
+ uint16_t pid;
+
+ pid = usb0_function_get_pid(pipe);
+ if (pid == DEVDRV_USBF_PID_BUF)
+ {
+ switch (pipe)
+ {
+ case USB_FUNCTION_PIPE0:
+ RZA_IO_RegWrite_16(&USB200.DCPCTR,
+ DEVDRV_USBF_PID_STALL2,
+ USB_DCPCTR_PID_SHIFT,
+ USB_DCPCTR_PID);
+ break;
+
+ case USB_FUNCTION_PIPE1:
+ RZA_IO_RegWrite_16(&USB200.PIPE1CTR,
+ DEVDRV_USBF_PID_STALL2,
+ USB_PIPEnCTR_1_5_PID_SHIFT,
+ USB_PIPEnCTR_1_5_PID);
+ break;
+
+ case USB_FUNCTION_PIPE2:
+ RZA_IO_RegWrite_16(&USB200.PIPE2CTR,
+ DEVDRV_USBF_PID_STALL2,
+ USB_PIPEnCTR_1_5_PID_SHIFT,
+ USB_PIPEnCTR_1_5_PID);
+ break;
+
+ case USB_FUNCTION_PIPE3:
+ RZA_IO_RegWrite_16(&USB200.PIPE3CTR,
+ DEVDRV_USBF_PID_STALL2,
+ USB_PIPEnCTR_1_5_PID_SHIFT,
+ USB_PIPEnCTR_1_5_PID);
+ break;
+
+ case USB_FUNCTION_PIPE4:
+ RZA_IO_RegWrite_16(&USB200.PIPE4CTR,
+ DEVDRV_USBF_PID_STALL2,
+ USB_PIPEnCTR_1_5_PID_SHIFT,
+ USB_PIPEnCTR_1_5_PID);
+ break;
+
+ case USB_FUNCTION_PIPE5:
+ RZA_IO_RegWrite_16(&USB200.PIPE5CTR,
+ DEVDRV_USBF_PID_STALL2,
+ USB_PIPEnCTR_1_5_PID_SHIFT,
+ USB_PIPEnCTR_1_5_PID);
+ break;
+
+ case USB_FUNCTION_PIPE6:
+ RZA_IO_RegWrite_16(&USB200.PIPE6CTR,
+ DEVDRV_USBF_PID_STALL2,
+ USB_PIPEnCTR_6_8_PID_SHIFT,
+ USB_PIPEnCTR_6_8_PID);
+ break;
+
+ case USB_FUNCTION_PIPE7:
+ RZA_IO_RegWrite_16(&USB200.PIPE7CTR,
+ DEVDRV_USBF_PID_STALL2,
+ USB_PIPEnCTR_6_8_PID_SHIFT,
+ USB_PIPEnCTR_6_8_PID);
+ break;
+
+ case USB_FUNCTION_PIPE8:
+ RZA_IO_RegWrite_16(&USB200.PIPE8CTR,
+ DEVDRV_USBF_PID_STALL2,
+ USB_PIPEnCTR_6_8_PID_SHIFT,
+ USB_PIPEnCTR_6_8_PID);
+ break;
+
+ case USB_FUNCTION_PIPE9:
+ RZA_IO_RegWrite_16(&USB200.PIPE9CTR,
+ DEVDRV_USBF_PID_STALL2,
+ USB_PIPEnCTR_9_PID_SHIFT,
+ USB_PIPEnCTR_9_PID);
+ break;
+
+ case USB_FUNCTION_PIPEA:
+ RZA_IO_RegWrite_16(&USB200.PIPEACTR,
+ DEVDRV_USBF_PID_STALL2,
+ USB_PIPEnCTR_A_F_PID_SHIFT,
+ USB_PIPEnCTR_A_F_PID);
+ break;
+
+ case USB_FUNCTION_PIPEB:
+ RZA_IO_RegWrite_16(&USB200.PIPEBCTR,
+ DEVDRV_USBF_PID_STALL2,
+ USB_PIPEnCTR_A_F_PID_SHIFT,
+ USB_PIPEnCTR_A_F_PID);
+ break;
+
+ case USB_FUNCTION_PIPEC:
+ RZA_IO_RegWrite_16(&USB200.PIPECCTR,
+ DEVDRV_USBF_PID_STALL2,
+ USB_PIPEnCTR_A_F_PID_SHIFT,
+ USB_PIPEnCTR_A_F_PID);
+ break;
+
+ case USB_FUNCTION_PIPED:
+ RZA_IO_RegWrite_16(&USB200.PIPEDCTR,
+ DEVDRV_USBF_PID_STALL2,
+ USB_PIPEnCTR_A_F_PID_SHIFT,
+ USB_PIPEnCTR_A_F_PID);
+ break;
+
+ case USB_FUNCTION_PIPEE:
+ RZA_IO_RegWrite_16(&USB200.PIPEECTR,
+ DEVDRV_USBF_PID_STALL2,
+ USB_PIPEnCTR_A_F_PID_SHIFT,
+ USB_PIPEnCTR_A_F_PID);
+ break;
+
+ case USB_FUNCTION_PIPEF:
+ RZA_IO_RegWrite_16(&USB200.PIPEFCTR,
+ DEVDRV_USBF_PID_STALL2,
+ USB_PIPEnCTR_A_F_PID_SHIFT,
+ USB_PIPEnCTR_A_F_PID);
+ break;
+
+ default:
+ break;
+ }
+ }
+ else
+ {
+ switch (pipe)
+ {
+ case USB_FUNCTION_PIPE0:
+ RZA_IO_RegWrite_16(&USB200.DCPCTR,
+ DEVDRV_USBF_PID_STALL,
+ USB_DCPCTR_PID_SHIFT,
+ USB_DCPCTR_PID);
+ break;
+
+ case USB_FUNCTION_PIPE1:
+ RZA_IO_RegWrite_16(&USB200.PIPE1CTR,
+ DEVDRV_USBF_PID_STALL,
+ USB_PIPEnCTR_1_5_PID_SHIFT,
+ USB_PIPEnCTR_1_5_PID);
+ break;
+
+ case USB_FUNCTION_PIPE2:
+ RZA_IO_RegWrite_16(&USB200.PIPE2CTR,
+ DEVDRV_USBF_PID_STALL,
+ USB_PIPEnCTR_1_5_PID_SHIFT,
+ USB_PIPEnCTR_1_5_PID);
+ break;
+
+ case USB_FUNCTION_PIPE3:
+ RZA_IO_RegWrite_16(&USB200.PIPE3CTR,
+ DEVDRV_USBF_PID_STALL,
+ USB_PIPEnCTR_1_5_PID_SHIFT,
+ USB_PIPEnCTR_1_5_PID);
+ break;
+
+ case USB_FUNCTION_PIPE4:
+ RZA_IO_RegWrite_16(&USB200.PIPE4CTR,
+ DEVDRV_USBF_PID_STALL,
+ USB_PIPEnCTR_1_5_PID_SHIFT,
+ USB_PIPEnCTR_1_5_PID);
+ break;
+
+ case USB_FUNCTION_PIPE5:
+ RZA_IO_RegWrite_16(&USB200.PIPE5CTR,
+ DEVDRV_USBF_PID_STALL,
+ USB_PIPEnCTR_1_5_PID_SHIFT,
+ USB_PIPEnCTR_1_5_PID);
+ break;
+
+ case USB_FUNCTION_PIPE6:
+ RZA_IO_RegWrite_16(&USB200.PIPE6CTR,
+ DEVDRV_USBF_PID_STALL,
+ USB_PIPEnCTR_6_8_PID_SHIFT,
+ USB_PIPEnCTR_6_8_PID);
+ break;
+
+ case USB_FUNCTION_PIPE7:
+ RZA_IO_RegWrite_16(&USB200.PIPE7CTR,
+ DEVDRV_USBF_PID_STALL,
+ USB_PIPEnCTR_6_8_PID_SHIFT,
+ USB_PIPEnCTR_6_8_PID);
+ break;
+
+ case USB_FUNCTION_PIPE8:
+ RZA_IO_RegWrite_16(&USB200.PIPE8CTR,
+ DEVDRV_USBF_PID_STALL,
+ USB_PIPEnCTR_6_8_PID_SHIFT,
+ USB_PIPEnCTR_6_8_PID);
+ break;
+
+ case USB_FUNCTION_PIPE9:
+ RZA_IO_RegWrite_16(&USB200.PIPE9CTR,
+ DEVDRV_USBF_PID_STALL,
+ USB_PIPEnCTR_9_PID_SHIFT,
+ USB_PIPEnCTR_9_PID);
+ break;
+
+ case USB_FUNCTION_PIPEA:
+ RZA_IO_RegWrite_16(&USB200.PIPEACTR,
+ DEVDRV_USBF_PID_STALL,
+ USB_PIPEnCTR_A_F_PID_SHIFT,
+ USB_PIPEnCTR_A_F_PID);
+ break;
+
+ case USB_FUNCTION_PIPEB:
+ RZA_IO_RegWrite_16(&USB200.PIPEBCTR,
+ DEVDRV_USBF_PID_STALL,
+ USB_PIPEnCTR_A_F_PID_SHIFT,
+ USB_PIPEnCTR_A_F_PID);
+ break;
+
+ case USB_FUNCTION_PIPEC:
+ RZA_IO_RegWrite_16(&USB200.PIPECCTR,
+ DEVDRV_USBF_PID_STALL,
+ USB_PIPEnCTR_A_F_PID_SHIFT,
+ USB_PIPEnCTR_A_F_PID);
+ break;
+
+ case USB_FUNCTION_PIPED:
+ RZA_IO_RegWrite_16(&USB200.PIPEDCTR,
+ DEVDRV_USBF_PID_STALL,
+ USB_PIPEnCTR_A_F_PID_SHIFT,
+ USB_PIPEnCTR_A_F_PID);
+ break;
+
+ case USB_FUNCTION_PIPEE:
+ RZA_IO_RegWrite_16(&USB200.PIPEECTR,
+ DEVDRV_USBF_PID_STALL,
+ USB_PIPEnCTR_A_F_PID_SHIFT,
+ USB_PIPEnCTR_A_F_PID);
+ break;
+
+ case USB_FUNCTION_PIPEF:
+ RZA_IO_RegWrite_16(&USB200.PIPEFCTR,
+ DEVDRV_USBF_PID_STALL,
+ USB_PIPEnCTR_A_F_PID_SHIFT,
+ USB_PIPEnCTR_A_F_PID);
+ break;
+
+ default:
+ break;
+ }
+ }
+}
+
+/*******************************************************************************
+* Function Name: usb0_function_clear_pid_stall
+* Description : Disables communication (NAK) in the pipe specified by the argument.
+* Arguments : uint16_t pipe ; pipe Number
+* Return Value : none
+*******************************************************************************/
+void usb0_function_clear_pid_stall (uint16_t pipe)
+{
+ usb0_function_set_pid_nak(pipe);
+}
+
+/*******************************************************************************
+* Function Name: usb0_function_get_pid
+* Description : Returns the pipe state specified by the argument.
+* Arguments : uint16_t pipe ; Pipe Number
+* Return Value : PID
+*******************************************************************************/
+uint16_t usb0_function_get_pid (uint16_t pipe)
+{
+ uint16_t pid;
+
+ switch (pipe)
+ {
+ case USB_FUNCTION_PIPE0:
+ pid = RZA_IO_RegRead_16(&USB200.DCPCTR,
+ USB_DCPCTR_PID_SHIFT,
+ USB_DCPCTR_PID);
+ break;
+
+ case USB_FUNCTION_PIPE1:
+ pid = RZA_IO_RegRead_16(&USB200.PIPE1CTR,
+ USB_PIPEnCTR_1_5_PID_SHIFT,
+ USB_PIPEnCTR_1_5_PID);
+ break;
+
+ case USB_FUNCTION_PIPE2:
+ pid = RZA_IO_RegRead_16(&USB200.PIPE2CTR,
+ USB_PIPEnCTR_1_5_PID_SHIFT,
+ USB_PIPEnCTR_1_5_PID);
+ break;
+
+ case USB_FUNCTION_PIPE3:
+ pid = RZA_IO_RegRead_16(&USB200.PIPE3CTR,
+ USB_PIPEnCTR_1_5_PID_SHIFT,
+ USB_PIPEnCTR_1_5_PID);
+ break;
+
+ case USB_FUNCTION_PIPE4:
+ pid = RZA_IO_RegRead_16(&USB200.PIPE4CTR,
+ USB_PIPEnCTR_1_5_PID_SHIFT,
+ USB_PIPEnCTR_1_5_PID);
+ break;
+
+ case USB_FUNCTION_PIPE5:
+ pid = RZA_IO_RegRead_16(&USB200.PIPE5CTR,
+ USB_PIPEnCTR_1_5_PID_SHIFT,
+ USB_PIPEnCTR_1_5_PID);
+ break;
+
+ case USB_FUNCTION_PIPE6:
+ pid = RZA_IO_RegRead_16(&USB200.PIPE6CTR,
+ USB_PIPEnCTR_6_8_PID_SHIFT,
+ USB_PIPEnCTR_6_8_PID);
+ break;
+
+ case USB_FUNCTION_PIPE7:
+ pid = RZA_IO_RegRead_16(&USB200.PIPE7CTR,
+ USB_PIPEnCTR_6_8_PID_SHIFT,
+ USB_PIPEnCTR_6_8_PID);
+ break;
+
+ case USB_FUNCTION_PIPE8:
+ pid = RZA_IO_RegRead_16(&USB200.PIPE8CTR,
+ USB_PIPEnCTR_6_8_PID_SHIFT,
+ USB_PIPEnCTR_6_8_PID);
+ break;
+
+ case USB_FUNCTION_PIPE9:
+ pid = RZA_IO_RegRead_16(&USB200.PIPE9CTR,
+ USB_PIPEnCTR_9_PID_SHIFT,
+ USB_PIPEnCTR_9_PID);
+ break;
+
+ case USB_FUNCTION_PIPEA:
+ pid = RZA_IO_RegRead_16(&USB200.PIPEACTR,
+ USB_PIPEnCTR_A_F_PID_SHIFT,
+ USB_PIPEnCTR_A_F_PID);
+ break;
+
+ case USB_FUNCTION_PIPEB:
+ pid = RZA_IO_RegRead_16(&USB200.PIPEBCTR,
+ USB_PIPEnCTR_A_F_PID_SHIFT,
+ USB_PIPEnCTR_A_F_PID);
+ break;
+
+ case USB_FUNCTION_PIPEC:
+ pid = RZA_IO_RegRead_16(&USB200.PIPECCTR,
+ USB_PIPEnCTR_A_F_PID_SHIFT,
+ USB_PIPEnCTR_A_F_PID);
+ break;
+
+ case USB_FUNCTION_PIPED:
+ pid = RZA_IO_RegRead_16(&USB200.PIPEDCTR,
+ USB_PIPEnCTR_A_F_PID_SHIFT,
+ USB_PIPEnCTR_A_F_PID);
+ break;
+
+ case USB_FUNCTION_PIPEE:
+ pid = RZA_IO_RegRead_16(&USB200.PIPEECTR,
+ USB_PIPEnCTR_A_F_PID_SHIFT,
+ USB_PIPEnCTR_A_F_PID);
+ break;
+
+ case USB_FUNCTION_PIPEF:
+ pid = RZA_IO_RegRead_16(&USB200.PIPEFCTR,
+ USB_PIPEnCTR_A_F_PID_SHIFT,
+ USB_PIPEnCTR_A_F_PID);
+ break;
+
+ default:
+ pid = 0;
+ break;
+ }
+
+ return pid;
+}
+
+/*******************************************************************************
+* Function Name: usb0_function_set_csclr
+* Description : CSPLIT status clear setting of sprit transaction in specified
+* : pipe is performed.
+* : When SQSET bit or SQCLR bit, and SQSET bit or SQCLR bit
+* : in DCPCTR register are continuously changed (when the sequence
+* : toggle bit of data PID is continuously changed over two or more pipes),
+* : the access cycle with 120 ns and more than 5 cycle bus clock is necessary.
+* : Do not set both SQCLR bit and SQSET bit to 1 at the same time.
+* : In addition, both bits should be operated after PID is set to NAK.
+* : However, when it is set to the isochronous transfer as the transfer type
+* : (TYPE=11), writing in SQSET bit is disabled.
+* Arguments : uint16_t pipe ; Pipe number
+* Return Value : none
+*******************************************************************************/
+void usb0_function_set_csclr (uint16_t pipe)
+{
+ switch (pipe)
+ {
+ case USB_FUNCTION_PIPE0:
+ RZA_IO_RegWrite_16(&USB200.DCPCTR,
+ 1,
+ USB_DCPCTR_CSCLR_SHIFT,
+ USB_DCPCTR_CSCLR);
+ break;
+
+ case USB_FUNCTION_PIPE1:
+ RZA_IO_RegWrite_16(&USB200.PIPE1CTR,
+ 1,
+ USB_PIPEnCTR_1_5_CSCLR_SHIFT,
+ USB_PIPEnCTR_1_5_CSCLR);
+ break;
+
+ case USB_FUNCTION_PIPE2:
+ RZA_IO_RegWrite_16(&USB200.PIPE2CTR,
+ 1,
+ USB_PIPEnCTR_1_5_CSCLR_SHIFT,
+ USB_PIPEnCTR_1_5_CSCLR);
+ break;
+
+ case USB_FUNCTION_PIPE3:
+ RZA_IO_RegWrite_16(&USB200.PIPE3CTR,
+ 1,
+ USB_PIPEnCTR_1_5_CSCLR_SHIFT,
+ USB_PIPEnCTR_1_5_CSCLR);
+ break;
+
+ case USB_FUNCTION_PIPE4:
+ RZA_IO_RegWrite_16(&USB200.PIPE4CTR,
+ 1,
+ USB_PIPEnCTR_1_5_CSCLR_SHIFT,
+ USB_PIPEnCTR_1_5_CSCLR);
+ break;
+
+ case USB_FUNCTION_PIPE5:
+ RZA_IO_RegWrite_16(&USB200.PIPE5CTR,
+ 1,
+ USB_PIPEnCTR_1_5_CSCLR_SHIFT,
+ USB_PIPEnCTR_1_5_CSCLR);
+ break;
+
+ case USB_FUNCTION_PIPE6:
+ RZA_IO_RegWrite_16(&USB200.PIPE6CTR,
+ 1,
+ USB_PIPEnCTR_6_8_CSCLR_SHIFT,
+ USB_PIPEnCTR_6_8_CSCLR);
+ break;
+
+ case USB_FUNCTION_PIPE7:
+ RZA_IO_RegWrite_16(&USB200.PIPE7CTR,
+ 1,
+ USB_PIPEnCTR_6_8_CSCLR_SHIFT,
+ USB_PIPEnCTR_6_8_CSCLR);
+ break;
+
+ case USB_FUNCTION_PIPE8:
+ RZA_IO_RegWrite_16(&USB200.PIPE8CTR,
+ 1,
+ USB_PIPEnCTR_6_8_CSCLR_SHIFT,
+ USB_PIPEnCTR_6_8_CSCLR);
+ break;
+
+ case USB_FUNCTION_PIPE9:
+ RZA_IO_RegWrite_16(&USB200.PIPE9CTR,
+ 1,
+ USB_PIPEnCTR_9_CSCLR_SHIFT,
+ USB_PIPEnCTR_9_CSCLR);
+ break;
+
+ default:
+ /* PIPEA-F have not CSCLR */
+ break;
+ }
+}
+
+/*******************************************************************************
+* Function Name: usb0_function_set_sqclr
+* Description : Sets the sequence bit of the pipe specified by the argument to
+* : DATA0.
+* Arguments : uint16_t pipe ; Pipe Number
+* Return Value : none
+*******************************************************************************/
+void usb0_function_set_sqclr (uint16_t pipe)
+{
+ switch (pipe)
+ {
+ case USB_FUNCTION_PIPE0:
+ RZA_IO_RegWrite_16(&USB200.DCPCTR,
+ 1,
+ USB_DCPCTR_SQCLR_SHIFT,
+ USB_DCPCTR_SQCLR);
+ break;
+
+ case USB_FUNCTION_PIPE1:
+ RZA_IO_RegWrite_16(&USB200.PIPE1CTR,
+ 1,
+ USB_PIPEnCTR_1_5_SQCLR_SHIFT,
+ USB_PIPEnCTR_1_5_SQCLR);
+ break;
+
+ case USB_FUNCTION_PIPE2:
+ RZA_IO_RegWrite_16(&USB200.PIPE2CTR,
+ 1,
+ USB_PIPEnCTR_1_5_SQCLR_SHIFT,
+ USB_PIPEnCTR_1_5_SQCLR);
+ break;
+
+ case USB_FUNCTION_PIPE3:
+ RZA_IO_RegWrite_16(&USB200.PIPE3CTR,
+ 1,
+ USB_PIPEnCTR_1_5_SQCLR_SHIFT,
+ USB_PIPEnCTR_1_5_SQCLR);
+ break;
+
+ case USB_FUNCTION_PIPE4:
+ RZA_IO_RegWrite_16(&USB200.PIPE4CTR,
+ 1,
+ USB_PIPEnCTR_1_5_SQCLR_SHIFT,
+ USB_PIPEnCTR_1_5_SQCLR);
+ break;
+
+ case USB_FUNCTION_PIPE5:
+ RZA_IO_RegWrite_16(&USB200.PIPE5CTR,
+ 1,
+ USB_PIPEnCTR_1_5_SQCLR_SHIFT,
+ USB_PIPEnCTR_1_5_SQCLR);
+ break;
+
+ case USB_FUNCTION_PIPE6:
+ RZA_IO_RegWrite_16(&USB200.PIPE6CTR,
+ 1,
+ USB_PIPEnCTR_6_8_SQCLR_SHIFT,
+ USB_PIPEnCTR_6_8_SQCLR);
+ break;
+
+ case USB_FUNCTION_PIPE7:
+ RZA_IO_RegWrite_16(&USB200.PIPE7CTR,
+ 1,
+ USB_PIPEnCTR_6_8_SQCLR_SHIFT,
+ USB_PIPEnCTR_6_8_SQCLR);
+ break;
+
+ case USB_FUNCTION_PIPE8:
+ RZA_IO_RegWrite_16(&USB200.PIPE8CTR,
+ 1,
+ USB_PIPEnCTR_6_8_SQCLR_SHIFT,
+ USB_PIPEnCTR_6_8_SQCLR);
+ break;
+
+ case USB_FUNCTION_PIPE9:
+ RZA_IO_RegWrite_16(&USB200.PIPE9CTR,
+ 1,
+ USB_PIPEnCTR_9_SQCLR_SHIFT,
+ USB_PIPEnCTR_9_SQCLR);
+ break;
+
+ case USB_FUNCTION_PIPEA:
+ RZA_IO_RegWrite_16(&USB200.PIPEACTR,
+ 1,
+ USB_PIPEnCTR_A_F_SQCLR_SHIFT,
+ USB_PIPEnCTR_A_F_SQCLR);
+ break;
+
+ case USB_FUNCTION_PIPEB:
+ RZA_IO_RegWrite_16(&USB200.PIPEBCTR,
+ 1,
+ USB_PIPEnCTR_A_F_SQCLR_SHIFT,
+ USB_PIPEnCTR_A_F_SQCLR);
+ break;
+
+ case USB_FUNCTION_PIPEC:
+ RZA_IO_RegWrite_16(&USB200.PIPECCTR,
+ 1,
+ USB_PIPEnCTR_A_F_SQCLR_SHIFT,
+ USB_PIPEnCTR_A_F_SQCLR);
+ break;
+
+ case USB_FUNCTION_PIPED:
+ RZA_IO_RegWrite_16(&USB200.PIPEDCTR,
+ 1,
+ USB_PIPEnCTR_A_F_SQCLR_SHIFT,
+ USB_PIPEnCTR_A_F_SQCLR);
+ break;
+
+ case USB_FUNCTION_PIPEE:
+ RZA_IO_RegWrite_16(&USB200.PIPEECTR,
+ 1,
+ USB_PIPEnCTR_A_F_SQCLR_SHIFT,
+ USB_PIPEnCTR_A_F_SQCLR);
+ break;
+
+ case USB_FUNCTION_PIPEF:
+ RZA_IO_RegWrite_16(&USB200.PIPEFCTR,
+ 1,
+ USB_PIPEnCTR_A_F_SQCLR_SHIFT,
+ USB_PIPEnCTR_A_F_SQCLR);
+ break;
+
+ default:
+ break;
+ }
+}
+
+/*******************************************************************************
+* Function Name: usb0_function_set_sqset
+* Description : Sets the sequence bit of the pipe specified by the argument to
+* : DATA1.
+* Arguments : uint16_t pipe ; Pipe number
+* Return Value : none
+*******************************************************************************/
+void usb0_function_set_sqset (uint16_t pipe)
+{
+ switch (pipe)
+ {
+ case USB_FUNCTION_PIPE0:
+ RZA_IO_RegWrite_16(&USB200.DCPCTR,
+ 1,
+ USB_DCPCTR_SQSET_SHIFT,
+ USB_DCPCTR_SQSET);
+ break;
+
+ case USB_FUNCTION_PIPE1:
+ RZA_IO_RegWrite_16(&USB200.PIPE1CTR,
+ 1,
+ USB_PIPEnCTR_1_5_SQSET_SHIFT,
+ USB_PIPEnCTR_1_5_SQSET);
+ break;
+
+ case USB_FUNCTION_PIPE2:
+ RZA_IO_RegWrite_16(&USB200.PIPE2CTR,
+ 1,
+ USB_PIPEnCTR_1_5_SQSET_SHIFT,
+ USB_PIPEnCTR_1_5_SQSET);
+ break;
+
+ case USB_FUNCTION_PIPE3:
+ RZA_IO_RegWrite_16(&USB200.PIPE3CTR,
+ 1,
+ USB_PIPEnCTR_1_5_SQSET_SHIFT,
+ USB_PIPEnCTR_1_5_SQSET);
+ break;
+
+ case USB_FUNCTION_PIPE4:
+ RZA_IO_RegWrite_16(&USB200.PIPE4CTR,
+ 1,
+ USB_PIPEnCTR_1_5_SQSET_SHIFT,
+ USB_PIPEnCTR_1_5_SQSET);
+ break;
+
+ case USB_FUNCTION_PIPE5:
+ RZA_IO_RegWrite_16(&USB200.PIPE5CTR,
+ 1,
+ USB_PIPEnCTR_1_5_SQSET_SHIFT,
+ USB_PIPEnCTR_1_5_SQSET);
+ break;
+
+ case USB_FUNCTION_PIPE6:
+ RZA_IO_RegWrite_16(&USB200.PIPE6CTR,
+ 1,
+ USB_PIPEnCTR_6_8_SQSET_SHIFT,
+ USB_PIPEnCTR_6_8_SQSET);
+ break;
+
+ case USB_FUNCTION_PIPE7:
+ RZA_IO_RegWrite_16(&USB200.PIPE7CTR,
+ 1,
+ USB_PIPEnCTR_6_8_SQSET_SHIFT,
+ USB_PIPEnCTR_6_8_SQSET);
+ break;
+
+ case USB_FUNCTION_PIPE8:
+ RZA_IO_RegWrite_16(&USB200.PIPE8CTR,
+ 1,
+ USB_PIPEnCTR_6_8_SQSET_SHIFT,
+ USB_PIPEnCTR_6_8_SQSET);
+ break;
+
+ case USB_FUNCTION_PIPE9:
+ RZA_IO_RegWrite_16(&USB200.PIPE9CTR,
+ 1,
+ USB_PIPEnCTR_9_SQSET_SHIFT,
+ USB_PIPEnCTR_9_SQSET);
+ break;
+
+ case USB_FUNCTION_PIPEA:
+ RZA_IO_RegWrite_16(&USB200.PIPEACTR,
+ 1,
+ USB_PIPEnCTR_A_F_SQSET_SHIFT,
+ USB_PIPEnCTR_A_F_SQSET);
+ break;
+
+ case USB_FUNCTION_PIPEB:
+ RZA_IO_RegWrite_16(&USB200.PIPEBCTR,
+ 1,
+ USB_PIPEnCTR_A_F_SQSET_SHIFT,
+ USB_PIPEnCTR_A_F_SQSET);
+ break;
+
+ case USB_FUNCTION_PIPEC:
+ RZA_IO_RegWrite_16(&USB200.PIPECCTR,
+ 1,
+ USB_PIPEnCTR_A_F_SQSET_SHIFT,
+ USB_PIPEnCTR_A_F_SQSET);
+ break;
+
+ case USB_FUNCTION_PIPED:
+ RZA_IO_RegWrite_16(&USB200.PIPEDCTR,
+ 1,
+ USB_PIPEnCTR_A_F_SQSET_SHIFT,
+ USB_PIPEnCTR_A_F_SQSET);
+ break;
+
+ case USB_FUNCTION_PIPEE:
+ RZA_IO_RegWrite_16(&USB200.PIPEECTR,
+ 1,
+ USB_PIPEnCTR_A_F_SQSET_SHIFT,
+ USB_PIPEnCTR_A_F_SQSET);
+ break;
+
+ case USB_FUNCTION_PIPEF:
+ RZA_IO_RegWrite_16(&USB200.PIPEFCTR,
+ 1,
+ USB_PIPEnCTR_A_F_SQSET_SHIFT,
+ USB_PIPEnCTR_A_F_SQSET);
+ break;
+
+ default:
+ break;
+ }
+}
+
+/*******************************************************************************
+* Function Name: usb0_function_get_sqmon
+* Description : Toggle bit of specified pipe is obtained
+* Arguments : uint16_t pipe ; Pipe number
+* Return Value : sqmon
+*******************************************************************************/
+uint16_t usb0_function_get_sqmon (uint16_t pipe)
+{
+ uint16_t sqmon;
+
+ switch (pipe)
+ {
+ case USB_FUNCTION_PIPE0:
+ sqmon = RZA_IO_RegRead_16(&USB200.DCPCTR,
+ USB_DCPCTR_SQMON_SHIFT,
+ USB_DCPCTR_SQMON);
+ break;
+
+ case USB_FUNCTION_PIPE1:
+ sqmon = RZA_IO_RegRead_16(&USB200.PIPE1CTR,
+ USB_PIPEnCTR_1_5_SQMON_SHIFT,
+ USB_PIPEnCTR_1_5_SQMON);
+ break;
+
+ case USB_FUNCTION_PIPE2:
+ sqmon = RZA_IO_RegRead_16(&USB200.PIPE2CTR,
+ USB_PIPEnCTR_1_5_SQMON_SHIFT,
+ USB_PIPEnCTR_1_5_SQMON);
+ break;
+
+ case USB_FUNCTION_PIPE3:
+ sqmon = RZA_IO_RegRead_16(&USB200.PIPE3CTR,
+ USB_PIPEnCTR_1_5_SQMON_SHIFT,
+ USB_PIPEnCTR_1_5_SQMON);
+ break;
+
+ case USB_FUNCTION_PIPE4:
+ sqmon = RZA_IO_RegRead_16(&USB200.PIPE4CTR,
+ USB_PIPEnCTR_1_5_SQMON_SHIFT,
+ USB_PIPEnCTR_1_5_SQMON);
+ break;
+
+ case USB_FUNCTION_PIPE5:
+ sqmon = RZA_IO_RegRead_16(&USB200.PIPE5CTR,
+ USB_PIPEnCTR_1_5_SQMON_SHIFT,
+ USB_PIPEnCTR_1_5_SQMON);
+ break;
+
+ case USB_FUNCTION_PIPE6:
+ sqmon = RZA_IO_RegRead_16(&USB200.PIPE6CTR,
+ USB_PIPEnCTR_6_8_SQMON_SHIFT,
+ USB_PIPEnCTR_6_8_SQMON);
+ break;
+
+ case USB_FUNCTION_PIPE7:
+ sqmon = RZA_IO_RegRead_16(&USB200.PIPE7CTR,
+ USB_PIPEnCTR_6_8_SQMON_SHIFT,
+ USB_PIPEnCTR_6_8_SQMON);
+ break;
+
+ case USB_FUNCTION_PIPE8:
+ sqmon = RZA_IO_RegRead_16(&USB200.PIPE8CTR,
+ USB_PIPEnCTR_6_8_SQMON_SHIFT,
+ USB_PIPEnCTR_6_8_SQMON);
+ break;
+
+ case USB_FUNCTION_PIPE9:
+ sqmon = RZA_IO_RegRead_16(&USB200.PIPE9CTR,
+ USB_PIPEnCTR_9_SQMON_SHIFT,
+ USB_PIPEnCTR_9_SQMON);
+ break;
+
+ case USB_FUNCTION_PIPEA:
+ sqmon = RZA_IO_RegRead_16(&USB200.PIPEACTR,
+ USB_PIPEnCTR_A_F_SQMON_SHIFT,
+ USB_PIPEnCTR_A_F_SQMON);
+ break;
+
+ case USB_FUNCTION_PIPEB:
+ sqmon = RZA_IO_RegRead_16(&USB200.PIPEBCTR,
+ USB_PIPEnCTR_A_F_SQMON_SHIFT,
+ USB_PIPEnCTR_A_F_SQMON);
+ break;
+
+ case USB_FUNCTION_PIPEC:
+ sqmon = RZA_IO_RegRead_16(&USB200.PIPECCTR,
+ USB_PIPEnCTR_A_F_SQMON_SHIFT,
+ USB_PIPEnCTR_A_F_SQMON);
+ break;
+
+ case USB_FUNCTION_PIPED:
+ sqmon = RZA_IO_RegRead_16(&USB200.PIPEDCTR,
+ USB_PIPEnCTR_A_F_SQMON_SHIFT,
+ USB_PIPEnCTR_A_F_SQMON);
+ break;
+
+ case USB_FUNCTION_PIPEE:
+ sqmon = RZA_IO_RegRead_16(&USB200.PIPEECTR,
+ USB_PIPEnCTR_A_F_SQMON_SHIFT,
+ USB_PIPEnCTR_A_F_SQMON);
+ break;
+
+ case USB_FUNCTION_PIPEF:
+ sqmon = RZA_IO_RegRead_16(&USB200.PIPEFCTR,
+ USB_PIPEnCTR_A_F_SQMON_SHIFT,
+ USB_PIPEnCTR_A_F_SQMON);
+ break;
+
+ default:
+ sqmon = 0;
+ break;
+ }
+
+ return sqmon;
+}
+
+/*******************************************************************************
+* Function Name: usb0_function_aclrm
+* Description : The buffer of specified pipe is initialized
+* Arguments : uint16_t pipe : Pipe
+* Return Value : none
+*******************************************************************************/
+void usb0_function_aclrm (uint16_t pipe)
+{
+ usb0_function_set_aclrm(pipe);
+ usb0_function_clr_aclrm(pipe);
+}
+
+/*******************************************************************************
+* Function Name: usb0_function_set_aclrm
+* Description : The auto buffer clear mode of specified pipe is enabled
+* Arguments : uint16_t pipe : Pipe
+* Return Value : none
+*******************************************************************************/
+void usb0_function_set_aclrm (uint16_t pipe)
+{
+ switch (pipe)
+ {
+ case USB_FUNCTION_PIPE0:
+ break;
+
+ case USB_FUNCTION_PIPE1:
+ RZA_IO_RegWrite_16(&USB200.PIPE1CTR,
+ 1,
+ USB_PIPEnCTR_1_5_ACLRM_SHIFT,
+ USB_PIPEnCTR_1_5_ACLRM);
+ break;
+
+ case USB_FUNCTION_PIPE2:
+ RZA_IO_RegWrite_16(&USB200.PIPE2CTR,
+ 1,
+ USB_PIPEnCTR_1_5_ACLRM_SHIFT,
+ USB_PIPEnCTR_1_5_ACLRM);
+ break;
+
+ case USB_FUNCTION_PIPE3:
+ RZA_IO_RegWrite_16(&USB200.PIPE3CTR,
+ 1,
+ USB_PIPEnCTR_1_5_ACLRM_SHIFT,
+ USB_PIPEnCTR_1_5_ACLRM);
+ break;
+
+ case USB_FUNCTION_PIPE4:
+ RZA_IO_RegWrite_16(&USB200.PIPE4CTR,
+ 1,
+ USB_PIPEnCTR_1_5_ACLRM_SHIFT,
+ USB_PIPEnCTR_1_5_ACLRM);
+ break;
+
+ case USB_FUNCTION_PIPE5:
+ RZA_IO_RegWrite_16(&USB200.PIPE5CTR,
+ 1,
+ USB_PIPEnCTR_1_5_ACLRM_SHIFT,
+ USB_PIPEnCTR_1_5_ACLRM);
+ break;
+
+ case USB_FUNCTION_PIPE6:
+ RZA_IO_RegWrite_16(&USB200.PIPE6CTR,
+ 1,
+ USB_PIPEnCTR_6_8_ACLRM_SHIFT,
+ USB_PIPEnCTR_6_8_ACLRM);
+ break;
+
+ case USB_FUNCTION_PIPE7:
+ RZA_IO_RegWrite_16(&USB200.PIPE7CTR,
+ 1,
+ USB_PIPEnCTR_6_8_ACLRM_SHIFT,
+ USB_PIPEnCTR_6_8_ACLRM);
+ break;
+
+ case USB_FUNCTION_PIPE8:
+ RZA_IO_RegWrite_16(&USB200.PIPE8CTR,
+ 1,
+ USB_PIPEnCTR_6_8_ACLRM_SHIFT,
+ USB_PIPEnCTR_6_8_ACLRM);
+ break;
+
+ case USB_FUNCTION_PIPE9:
+ RZA_IO_RegWrite_16(&USB200.PIPE9CTR,
+ 1,
+ USB_PIPEnCTR_9_ACLRM_SHIFT,
+ USB_PIPEnCTR_9_ACLRM);
+ break;
+
+ case USB_FUNCTION_PIPEA:
+ RZA_IO_RegWrite_16(&USB200.PIPEACTR,
+ 1,
+ USB_PIPEnCTR_A_F_ACLRM_SHIFT,
+ USB_PIPEnCTR_A_F_ACLRM);
+ break;
+
+ case USB_FUNCTION_PIPEB:
+ RZA_IO_RegWrite_16(&USB200.PIPEBCTR,
+ 1,
+ USB_PIPEnCTR_A_F_ACLRM_SHIFT,
+ USB_PIPEnCTR_A_F_ACLRM);
+ break;
+
+ case USB_FUNCTION_PIPEC:
+ RZA_IO_RegWrite_16(&USB200.PIPECCTR,
+ 1,
+ USB_PIPEnCTR_A_F_ACLRM_SHIFT,
+ USB_PIPEnCTR_A_F_ACLRM);
+ break;
+
+ case USB_FUNCTION_PIPED:
+ RZA_IO_RegWrite_16(&USB200.PIPEDCTR,
+ 1,
+ USB_PIPEnCTR_A_F_ACLRM_SHIFT,
+ USB_PIPEnCTR_A_F_ACLRM);
+ break;
+
+ case USB_FUNCTION_PIPEE:
+ RZA_IO_RegWrite_16(&USB200.PIPEECTR,
+ 1,
+ USB_PIPEnCTR_A_F_ACLRM_SHIFT,
+ USB_PIPEnCTR_A_F_ACLRM);
+ break;
+
+ case USB_FUNCTION_PIPEF:
+ RZA_IO_RegWrite_16(&USB200.PIPEFCTR,
+ 1,
+ USB_PIPEnCTR_A_F_ACLRM_SHIFT,
+ USB_PIPEnCTR_A_F_ACLRM);
+ break;
+
+ default:
+ break;
+ }
+}
+
+/*******************************************************************************
+* Function Name: usb0_function_clr_aclrm
+* Description : The auto buffer clear mode of specified pipe is enabled
+* Arguments : uint16_t pipe : Pipe
+* Return Value : none
+*******************************************************************************/
+void usb0_function_clr_aclrm (uint16_t pipe)
+{
+ switch (pipe)
+ {
+ case USB_FUNCTION_PIPE0:
+ break;
+
+ case USB_FUNCTION_PIPE1:
+ RZA_IO_RegWrite_16(&USB200.PIPE1CTR,
+ 0,
+ USB_PIPEnCTR_1_5_ACLRM_SHIFT,
+ USB_PIPEnCTR_1_5_ACLRM);
+ break;
+
+ case USB_FUNCTION_PIPE2:
+ RZA_IO_RegWrite_16(&USB200.PIPE2CTR,
+ 0,
+ USB_PIPEnCTR_1_5_ACLRM_SHIFT,
+ USB_PIPEnCTR_1_5_ACLRM);
+ break;
+
+ case USB_FUNCTION_PIPE3:
+ RZA_IO_RegWrite_16(&USB200.PIPE3CTR,
+ 0,
+ USB_PIPEnCTR_1_5_ACLRM_SHIFT,
+ USB_PIPEnCTR_1_5_ACLRM);
+ break;
+
+ case USB_FUNCTION_PIPE4:
+ RZA_IO_RegWrite_16(&USB200.PIPE4CTR,
+ 0,
+ USB_PIPEnCTR_1_5_ACLRM_SHIFT,
+ USB_PIPEnCTR_1_5_ACLRM);
+ break;
+
+ case USB_FUNCTION_PIPE5:
+ RZA_IO_RegWrite_16(&USB200.PIPE5CTR,
+ 0,
+ USB_PIPEnCTR_1_5_ACLRM_SHIFT,
+ USB_PIPEnCTR_1_5_ACLRM);
+ break;
+
+ case USB_FUNCTION_PIPE6:
+ RZA_IO_RegWrite_16(&USB200.PIPE6CTR,
+ 0,
+ USB_PIPEnCTR_6_8_ACLRM_SHIFT,
+ USB_PIPEnCTR_6_8_ACLRM);
+ break;
+
+ case USB_FUNCTION_PIPE7:
+ RZA_IO_RegWrite_16(&USB200.PIPE7CTR,
+ 0,
+ USB_PIPEnCTR_6_8_ACLRM_SHIFT,
+ USB_PIPEnCTR_6_8_ACLRM);
+ break;
+
+ case USB_FUNCTION_PIPE8:
+ RZA_IO_RegWrite_16(&USB200.PIPE8CTR,
+ 0,
+ USB_PIPEnCTR_6_8_ACLRM_SHIFT,
+ USB_PIPEnCTR_6_8_ACLRM);
+ break;
+
+ case USB_FUNCTION_PIPE9:
+ RZA_IO_RegWrite_16(&USB200.PIPE9CTR,
+ 0,
+ USB_PIPEnCTR_9_ACLRM_SHIFT,
+ USB_PIPEnCTR_9_ACLRM);
+ break;
+
+ case USB_FUNCTION_PIPEA:
+ RZA_IO_RegWrite_16(&USB200.PIPEACTR,
+ 0,
+ USB_PIPEnCTR_A_F_ACLRM_SHIFT,
+ USB_PIPEnCTR_A_F_ACLRM);
+ break;
+
+ case USB_FUNCTION_PIPEB:
+ RZA_IO_RegWrite_16(&USB200.PIPEBCTR,
+ 0,
+ USB_PIPEnCTR_A_F_ACLRM_SHIFT,
+ USB_PIPEnCTR_A_F_ACLRM);
+ break;
+
+ case USB_FUNCTION_PIPEC:
+ RZA_IO_RegWrite_16(&USB200.PIPECCTR,
+ 0,
+ USB_PIPEnCTR_A_F_ACLRM_SHIFT,
+ USB_PIPEnCTR_A_F_ACLRM);
+ break;
+
+ case USB_FUNCTION_PIPED:
+ RZA_IO_RegWrite_16(&USB200.PIPEDCTR,
+ 0,
+ USB_PIPEnCTR_A_F_ACLRM_SHIFT,
+ USB_PIPEnCTR_A_F_ACLRM);
+ break;
+
+ case USB_FUNCTION_PIPEE:
+ RZA_IO_RegWrite_16(&USB200.PIPEECTR,
+ 0,
+ USB_PIPEnCTR_A_F_ACLRM_SHIFT,
+ USB_PIPEnCTR_A_F_ACLRM);
+ break;
+
+ case USB_FUNCTION_PIPEF:
+ RZA_IO_RegWrite_16(&USB200.PIPEFCTR,
+ 0,
+ USB_PIPEnCTR_A_F_ACLRM_SHIFT,
+ USB_PIPEnCTR_A_F_ACLRM);
+ break;
+
+ default:
+ break;
+ }
+}
+
+/*******************************************************************************
+* Function Name: usb0_function_get_inbuf
+* Description : Returns INBUFM of the pipe specified by the argument.
+* Arguments : uint16_t pipe ; Pipe Number
+* Return Value : inbuf
+*******************************************************************************/
+uint16_t usb0_function_get_inbuf (uint16_t pipe)
+{
+ uint16_t inbuf;
+
+ switch (pipe)
+ {
+ case USB_FUNCTION_PIPE0:
+ inbuf = 0;
+ break;
+
+ case USB_FUNCTION_PIPE1:
+ inbuf = RZA_IO_RegRead_16(&USB200.PIPE1CTR,
+ USB_PIPEnCTR_1_5_INBUFM_SHIFT,
+ USB_PIPEnCTR_1_5_INBUFM);
+ break;
+
+ case USB_FUNCTION_PIPE2:
+ inbuf = RZA_IO_RegRead_16(&USB200.PIPE2CTR,
+ USB_PIPEnCTR_1_5_INBUFM_SHIFT,
+ USB_PIPEnCTR_1_5_INBUFM);
+ break;
+
+ case USB_FUNCTION_PIPE3:
+ inbuf = RZA_IO_RegRead_16(&USB200.PIPE3CTR,
+ USB_PIPEnCTR_1_5_INBUFM_SHIFT,
+ USB_PIPEnCTR_1_5_INBUFM);
+ break;
+
+ case USB_FUNCTION_PIPE4:
+ inbuf = RZA_IO_RegRead_16(&USB200.PIPE4CTR,
+ USB_PIPEnCTR_1_5_INBUFM_SHIFT,
+ USB_PIPEnCTR_1_5_INBUFM);
+ break;
+
+ case USB_FUNCTION_PIPE5:
+ inbuf = RZA_IO_RegRead_16(&USB200.PIPE5CTR,
+ USB_PIPEnCTR_1_5_INBUFM_SHIFT,
+ USB_PIPEnCTR_1_5_INBUFM);
+ break;
+
+ case USB_FUNCTION_PIPE6:
+ inbuf = 0;
+ break;
+
+ case USB_FUNCTION_PIPE7:
+ inbuf = 0;
+ break;
+
+ case USB_FUNCTION_PIPE8:
+ inbuf = 0;
+ break;
+
+ case USB_FUNCTION_PIPE9:
+ inbuf = RZA_IO_RegRead_16(&USB200.PIPE9CTR,
+ USB_PIPEnCTR_9_INBUFM_SHIFT,
+ USB_PIPEnCTR_9_INBUFM);
+ break;
+
+ case USB_FUNCTION_PIPEA:
+ inbuf = RZA_IO_RegRead_16(&USB200.PIPEACTR,
+ USB_PIPEnCTR_A_F_INBUFM_SHIFT,
+ USB_PIPEnCTR_A_F_INBUFM);
+ break;
+
+ case USB_FUNCTION_PIPEB:
+ inbuf = RZA_IO_RegRead_16(&USB200.PIPEBCTR,
+ USB_PIPEnCTR_A_F_INBUFM_SHIFT,
+ USB_PIPEnCTR_A_F_INBUFM);
+ break;
+
+ case USB_FUNCTION_PIPEC:
+ inbuf = RZA_IO_RegRead_16(&USB200.PIPECCTR,
+ USB_PIPEnCTR_A_F_INBUFM_SHIFT,
+ USB_PIPEnCTR_A_F_INBUFM);
+ break;
+
+ case USB_FUNCTION_PIPED:
+ inbuf = RZA_IO_RegRead_16(&USB200.PIPEDCTR,
+ USB_PIPEnCTR_A_F_INBUFM_SHIFT,
+ USB_PIPEnCTR_A_F_INBUFM);
+ break;
+
+ case USB_FUNCTION_PIPEE:
+ inbuf = RZA_IO_RegRead_16(&USB200.PIPEECTR,
+ USB_PIPEnCTR_A_F_INBUFM_SHIFT,
+ USB_PIPEnCTR_A_F_INBUFM);
+ break;
+
+ case USB_FUNCTION_PIPEF:
+ inbuf = RZA_IO_RegRead_16(&USB200.PIPEFCTR,
+ USB_PIPEnCTR_A_F_INBUFM_SHIFT,
+ USB_PIPEnCTR_A_F_INBUFM);
+ break;
+
+ default:
+ inbuf = 0;
+ break;
+ }
+
+ return inbuf;
+}
+
+/*******************************************************************************
+* Function Name: usb0_function_setting_interrupt
+* Description : Sets the USB module interrupt level.
+* Arguments : uint8_t level ;interrupt level
+* Return Value : none
+*******************************************************************************/
+#if 0
+void usb0_function_setting_interrupt (uint8_t level)
+{
+ uint16_t d0fifo_dmaintid;
+ uint16_t d1fifo_dmaintid;
+
+ R_INTC_RegistIntFunc(INTC_ID_USBI0, usb0_function_interrupt);
+ R_INTC_SetPriority(INTC_ID_USBI0, level);
+ R_INTC_Enable(INTC_ID_USBI0);
+
+ d0fifo_dmaintid = Userdef_USB_usb0_function_d0fifo_dmaintid();
+
+ if (d0fifo_dmaintid != 0xFFFF)
+ {
+ R_INTC_RegistIntFunc(d0fifo_dmaintid, usb0_function_dma_interrupt_d0fifo);
+ R_INTC_SetPriority(d0fifo_dmaintid, level);
+ R_INTC_Enable(d0fifo_dmaintid);
+ }
+
+ d1fifo_dmaintid = Userdef_USB_usb0_function_d1fifo_dmaintid();
+
+ if (d1fifo_dmaintid != 0xFFFF)
+ {
+ R_INTC_RegistIntFunc(d1fifo_dmaintid, usb0_function_dma_interrupt_d1fifo);
+ R_INTC_SetPriority(d1fifo_dmaintid, level);
+ R_INTC_Enable(d1fifo_dmaintid);
+ }
+}
+#endif
+
+/*******************************************************************************
+* Function Name: usb0_function_reset_module
+* Description : Initializes the USB module.
+* : Enables providing clock to the USB module.
+* : Sets USB bus wait register.
+* Arguments : uint16_t clockmode ; 48MHz ; USBFCLOCK_X1_48MHZ
+* : ; 12MHz ; USBFCLOCK_EXTAL_12MHZ
+* Return Value : none
+*******************************************************************************/
+void usb0_function_reset_module (uint16_t clockmode)
+{
+ /* UPLLE bit is only USB0 */
+ if (RZA_IO_RegRead_16(&USB200.SYSCFG0,
+ USB_SYSCFG_UPLLE_SHIFT,
+ USB_SYSCFG_UPLLE) == 1)
+ {
+ if ((USB200.SYSCFG0 & USB_FUNCTION_BITUCKSEL) != clockmode)
+ {
+ RZA_IO_RegWrite_16(&USB200.SUSPMODE,
+ 0,
+ USB_SUSPMODE_SUSPM_SHIFT,
+ USB_SUSPMODE_SUSPM);
+ USB200.SYSCFG0 = 0;
+ USB200.SYSCFG0 = (USB_FUNCTION_BITUPLLE | clockmode);
+ Userdef_USB_usb0_function_delay_xms(1);
+ RZA_IO_RegWrite_16(&USB200.SUSPMODE,
+ 1,
+ USB_SUSPMODE_SUSPM_SHIFT,
+ USB_SUSPMODE_SUSPM);
+ }
+ else
+ {
+ RZA_IO_RegWrite_16(&USB200.SUSPMODE,
+ 0,
+ USB_SUSPMODE_SUSPM_SHIFT,
+ USB_SUSPMODE_SUSPM);
+ Userdef_USB_usb0_function_delay_xms(1);
+ RZA_IO_RegWrite_16(&USB200.SUSPMODE,
+ 1,
+ USB_SUSPMODE_SUSPM_SHIFT,
+ USB_SUSPMODE_SUSPM);
+ }
+ }
+ else
+ {
+ RZA_IO_RegWrite_16(&USB200.SUSPMODE,
+ 0,
+ USB_SUSPMODE_SUSPM_SHIFT,
+ USB_SUSPMODE_SUSPM);
+ USB200.SYSCFG0 = 0;
+ USB200.SYSCFG0 = (USB_FUNCTION_BITUPLLE | clockmode);
+ Userdef_USB_usb0_function_delay_xms(1);
+ RZA_IO_RegWrite_16(&USB200.SUSPMODE,
+ 1,
+ USB_SUSPMODE_SUSPM_SHIFT,
+ USB_SUSPMODE_SUSPM);
+ }
+
+ USB200.BUSWAIT = (uint16_t)(USB_FUNCTION_BUSWAIT_05 & USB_FUNCTION_BITBWAIT);
+}
+
+/*******************************************************************************
+* Function Name: usb0_function_get_buf_size
+* Description : Obtains pipe buffer size specified by the argument and
+* : maximum packet size of the USB device in use.
+* : When USB_FUNCTION_PIPE0 is specified by the argument, obtains the maximum
+* : packet size of the USB device using the corresponding pipe.
+* : For the case that USB_FUNCTION_PIPE0 is not assigned by the argument, when the
+* : corresponding pipe is in continuous transfer mode,
+* : obtains the buffer size allocated in the corresponcing pipe,
+* : when incontinuous transfer, obtains maximum packet size.
+* Arguments : uint16_t pipe ; Pipe Number
+* Return Value : Maximum packet size or buffer size
+*******************************************************************************/
+uint16_t usb0_function_get_buf_size (uint16_t pipe)
+{
+ uint16_t size;
+ uint16_t bufsize;
+
+ if (pipe == USB_FUNCTION_PIPE0)
+ {
+ size = RZA_IO_RegRead_16(&USB200.DCPMAXP,
+ USB_DCPMAXP_MXPS_SHIFT,
+ USB_DCPMAXP_MXPS);
+ }
+ else
+ {
+ if (RZA_IO_RegRead_16(&g_usb0_function_pipecfg[pipe], USB_PIPECFG_CNTMD_SHIFT, USB_PIPECFG_CNTMD) == 1)
+ {
+ bufsize = RZA_IO_RegRead_16(&g_usb0_function_pipebuf[pipe], USB_PIPEBUF_BUFSIZE_SHIFT, USB_PIPEBUF_BUFSIZE);
+ size = (uint16_t)((bufsize + 1) * USB_FUNCTION_PIPExBUF);
+ }
+ else
+ {
+ size = RZA_IO_RegRead_16(&g_usb0_function_pipemaxp[pipe], USB_PIPEMAXP_MXPS_SHIFT, USB_PIPEMAXP_MXPS);
+ }
+ }
+ return size;
+}
+
+/*******************************************************************************
+* Function Name: usb0_function_get_mxps
+* Description : Obtains maximum packet size of the USB device using the pipe
+* : specified by the argument.
+* Arguments : uint16_t pipe ; Pipe Number
+* Return Value : Max Packet Size
+*******************************************************************************/
+uint16_t usb0_function_get_mxps (uint16_t pipe)
+{
+ uint16_t size;
+
+ if (pipe == USB_FUNCTION_PIPE0)
+ {
+ size = RZA_IO_RegRead_16(&USB200.DCPMAXP,
+ USB_DCPMAXP_MXPS_SHIFT,
+ USB_DCPMAXP_MXPS);
+ }
+ else
+ {
+ size = RZA_IO_RegRead_16(&g_usb0_function_pipemaxp[pipe], USB_PIPEMAXP_MXPS_SHIFT, USB_PIPEMAXP_MXPS);
+ }
+ return size;
+}
+
+/* End of File */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/USBDevice/TARGET_RENESAS/TARGET_VK_RZ_A1H/usb0/src/function/usb0_function_api.c Fri Apr 29 01:16:25 2016 +0100
@@ -0,0 +1,441 @@
+/*******************************************************************************
+* DISCLAIMER
+* This software is supplied by Renesas Electronics Corporation and is only
+* intended for use with Renesas products. No other uses are authorized. This
+* software is owned by Renesas Electronics Corporation and is protected under
+* all applicable laws, including copyright laws.
+* THIS SOFTWARE IS PROVIDED "AS IS" AND RENESAS MAKES NO WARRANTIES REGARDING
+* THIS SOFTWARE, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING BUT NOT
+* LIMITED TO WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE
+* AND NON-INFRINGEMENT. ALL SUCH WARRANTIES ARE EXPRESSLY DISCLAIMED.
+* TO THE MAXIMUM EXTENT PERMITTED NOT PROHIBITED BY LAW, NEITHER RENESAS
+* ELECTRONICS CORPORATION NOR ANY OF ITS AFFILIATED COMPANIES SHALL BE LIABLE
+* FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR
+* ANY REASON RELATED TO THIS SOFTWARE, EVEN IF RENESAS OR ITS AFFILIATES HAVE
+* BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
+* Renesas reserves the right, without notice, to make changes to this software
+* and to discontinue the availability of this software. By using this software,
+* you agree to the additional terms and conditions found by accessing the
+* following link:
+* http://www.renesas.com/disclaimer
+* Copyright (C) 2012 - 2014 Renesas Electronics Corporation. All rights reserved.
+*******************************************************************************/
+/*******************************************************************************
+* File Name : usb0_function_api.c
+* $Rev: 1116 $
+* $Date:: 2014-07-09 16:29:19 +0900#$
+* Device(s) : RZ/A1H
+* Tool-Chain :
+* OS : None
+* H/W Platform :
+* Description : RZ/A1H R7S72100 USB Sample Program
+* Operation :
+* Limitations :
+*******************************************************************************/
+
+
+/*******************************************************************************
+Includes <System Includes> , "Project Includes"
+*******************************************************************************/
+#include "usb0_function.h"
+#include "dev_drv.h"
+
+
+/*******************************************************************************
+Typedef definitions
+*******************************************************************************/
+
+
+/*******************************************************************************
+Macro definitions
+*******************************************************************************/
+
+
+/*******************************************************************************
+Imported global variables and functions (from other files)
+*******************************************************************************/
+
+
+/*******************************************************************************
+Exported global variables and functions (to be accessed by other files)
+*******************************************************************************/
+
+
+/*******************************************************************************
+Private global variables and functions
+*******************************************************************************/
+
+
+/*******************************************************************************
+* Function Name: usb0_api_function_init
+* Description : Initializes the USB module in the USB function mode.
+* Arguments : uint8_t int_level ; interruput level
+* : uint16_t mode : Speed modes
+* : : USB_FUCNTION_HIGH_SPEED: High-speed device
+* : : USB_FUCNTION_FULL_SPEED: Full-speed device
+* : uint16_t clockmode ; 48MHz ; USBFCLOCK_X1_48MHZ
+* : ; 12MHz ; USBFCLOCK_EXTAL_12MHZ
+* Return Value : none
+*******************************************************************************/
+#if 0
+void usb0_api_function_init (uint8_t int_level, uint16_t mode, uint16_t clockmode)
+{
+ volatile uint8_t dummy_buf;
+
+ CPG.STBCR7 &= 0xfd; /* The clock of USB0 modules is permitted */
+ dummy_buf = CPG.STBCR7; /* (Dummy read) */
+
+ usb0_function_setting_interrupt(int_level);
+
+ usb0_function_reset_module(clockmode); /* reset USB module with setting tranciever */
+ /* and HSE=1 */
+
+ usb0_function_init_status(); /* clear variables */
+
+ usb0_function_InitModule(mode); /* select USB Function and Interrupt Enable */
+ /* Detect USB Device to attach or detach */
+}
+#endif
+
+/*******************************************************************************
+* Function Name: usb0_api_function_IsConfigured
+* Description : Checks if the USB device is configured to return the result as
+* : the return value.
+* Arguments : none
+* Return Value : DEVDRV_USBF_YES : Configured & Configured Suspend
+* : DEVDRV_USBF_NO : not Configured
+*******************************************************************************/
+uint16_t usb0_api_function_IsConfigured (void)
+{
+ uint16_t dvst;
+
+ dvst = usb0_function_GetDeviceState();
+
+ if ((dvst == USB_FUNCTION_DVST_CONFIGURED) ||
+ (dvst == USB_FUNCTION_DVST_CONFIGURED_SUSPEND))
+ {
+ return DEVDRV_USBF_YES;
+ }
+
+ return DEVDRV_USBF_NO;
+}
+
+/*******************************************************************************
+* Function Name: usb0_function_GetDeviceState
+* Description : Returns the state of USB device.
+* Arguments : none
+* Return Value : Device States
+*******************************************************************************/
+uint16_t usb0_function_GetDeviceState (void)
+{
+ uint16_t dvsq;
+ uint16_t dvst;
+
+ dvsq = USB200.INTSTS0;
+ switch(dvsq & USB_FUNCTION_BITDVSQ)
+ {
+ case USB_FUNCTION_DS_POWR: /* Power state *//* power-on */
+ dvst = USB_FUNCTION_DVST_POWERED;
+ break;
+
+ case USB_FUNCTION_DS_DFLT: /* Default state *//* bus-reset */
+ dvst = USB_FUNCTION_DVST_DEFAULT;
+ break;
+
+ case USB_FUNCTION_DS_ADDS: /* Address state */
+ dvst = USB_FUNCTION_DVST_ADDRESS;
+ break;
+
+ case USB_FUNCTION_DS_CNFG: /* Configured state */
+ dvst = USB_FUNCTION_DVST_CONFIGURED;
+ break;
+
+ case USB_FUNCTION_DS_SPD_CNFG: /* Configured Suspend state */
+ dvst = USB_FUNCTION_DVST_CONFIGURED_SUSPEND;
+ break;
+
+ case USB_FUNCTION_DS_SPD_POWR: /* Power Suspend state */
+ case USB_FUNCTION_DS_SPD_DFLT: /* Default Suspend state */
+ case USB_FUNCTION_DS_SPD_ADDR: /* Address Suspend state */
+ dvst = USB_FUNCTION_DVST_SUSPEND;
+ break;
+
+ default: /* error */
+ dvst = USB_FUNCTION_DVST_SUSPEND;
+ break;
+ }
+
+ return dvst;
+}
+
+/*******************************************************************************
+* Function Name: usb0_api_function_start_receive_transfer
+* Description : Starts USB data reception using the pipe specified in the argument.
+* : The FIFO for using is set in the pipe definition table.
+* Arguments : uint16_t pipe ; Pipe Number
+* : uint32_t size ; Data Size
+* : uint8_t *data ; Data data Address
+* Return Value : none
+*******************************************************************************/
+void usb0_api_function_start_receive_transfer (uint16_t pipe, uint32_t size, uint8_t * data)
+{
+ usb0_function_start_receive_transfer(pipe, size, data);
+}
+
+/*******************************************************************************
+* Function Name: usb0_api_function_start_send_transfer
+* Description : Starts the USB data communication using pipe specified by the argument.
+* Arguments : uint16_t pipe ; Pipe Number
+* : uint32_t size ; Data Size
+* : uint8_t *data ; Data data Address
+* Return Value : DEVDRV_USBF_WRITEEND ; Write end
+* : DEVDRV_USBF_WRITESHRT ; short data
+* : DEVDRV_USBF_WRITING ; Continue of data write
+* : DEVDRV_USBF_WRITEDMA ; Write DMA
+* : DEVDRV_USBF_FIFOERROR ; FIFO status
+*******************************************************************************/
+uint16_t usb0_api_function_start_send_transfer (uint16_t pipe, uint32_t size, uint8_t * data)
+{
+ uint16_t status;
+
+ status = usb0_function_start_send_transfer(pipe, size, data);
+
+ return status;
+}
+
+/*******************************************************************************
+* Function Name: usb0_api_function_check_pipe_status
+* Description : Starts USB data reception using the pipe specified in the argument.
+* : The FIFO for using is set in the pipe definition table.
+* Arguments : uint16_t pipe ; Pipe Number
+* : uint32_t *size ; Data Size
+* Return Value : Pipe Status
+*******************************************************************************/
+uint16_t usb0_api_function_check_pipe_status (uint16_t pipe, uint32_t * size)
+{
+ if (g_usb0_function_pipe_status[pipe] == DEVDRV_USBF_PIPE_DONE)
+ {
+ *size = g_usb0_function_PipeDataSize[pipe];
+ g_usb0_function_pipe_status[pipe] = DEVDRV_USBF_PIPE_IDLE;
+
+ return DEVDRV_USBF_PIPE_DONE;
+ }
+ else if (g_usb0_function_pipe_status[pipe] == DEVDRV_USBF_PIPE_NORES)
+ {
+ *size = 0;
+ g_usb0_function_pipe_status[pipe] = DEVDRV_USBF_PIPE_IDLE;
+
+ return DEVDRV_USBF_PIPE_NORES;
+ }
+ else if (g_usb0_function_pipe_status[pipe] == DEVDRV_USBF_PIPE_STALL)
+ {
+ *size = 0;
+ g_usb0_function_pipe_status[pipe] = DEVDRV_USBF_PIPE_IDLE;
+
+ return DEVDRV_USBF_PIPE_STALL;
+ }
+ else if (g_usb0_function_pipe_status[pipe] == DEVDRV_USBF_FIFOERROR)
+ {
+ *size = 0;
+ g_usb0_function_pipe_status[pipe] = DEVDRV_USBF_PIPE_IDLE;
+
+ return DEVDRV_USBF_FIFOERROR;
+ }
+ else
+ {
+ /* Do Nothing */
+ }
+
+ return g_usb0_function_pipe_status[pipe];
+}
+
+/*******************************************************************************
+* Function Name: usb0_api_function_clear_pipe_status
+* Description : Starts USB data reception using the pipe specified in the argument.
+* : The FIFO for using is set in the pipe definition table.
+* Arguments : uint16_t pipe ; Pipe Number
+* Return Value : Pipe Status
+*******************************************************************************/
+void usb0_api_function_clear_pipe_status (uint16_t pipe)
+{
+ g_usb0_function_pipe_status[pipe] = DEVDRV_USBF_PIPE_IDLE;
+ g_usb0_function_PipeDataSize[pipe] = 0;
+}
+
+/*******************************************************************************
+* Function Name: usb0_api_function_set_pid_buf
+* Description : Enables communicaqtion in the pipe specified by the argument
+* : (BUF).
+* Arguments : uint16_t pipe ; pipe Number
+* Return Value : none
+*******************************************************************************/
+void usb0_api_function_set_pid_buf (uint16_t pipe)
+{
+ usb0_function_set_pid_buf(pipe);
+}
+
+/*******************************************************************************
+* Function Name: usb0_api_function_set_pid_nak
+* Description : Disables communication (NAK) in the pipe specified by the argument.
+* : When the pipe status was enabling communication (BUF) before
+* : executing before executing this function, waits in the software
+* : until the pipe becomes ready after setting disabled.
+* Arguments : uint16_t pipe ; pipe Number
+* Return Value : none
+*******************************************************************************/
+void usb0_api_function_set_pid_nak (uint16_t pipe)
+{
+ usb0_function_set_pid_nak(pipe);
+}
+
+/*******************************************************************************
+* Function Name: usb0_api_function_set_pid_stall
+* Description : Disables communication (STALL) in the pipe specified by the
+* : argument.
+* Arguments : uint16_t pipe ; pipe Number
+* Return Value : none
+*******************************************************************************/
+void usb0_api_function_set_pid_stall (uint16_t pipe)
+{
+ usb0_function_set_pid_stall(pipe);
+}
+
+/*******************************************************************************
+* Function Name: usb0_api_function_clear_pid_stall
+* Description : Disables communication (NAK) in the pipe specified by the argument.
+* Arguments : uint16_t pipe ; pipe Number
+* Return Value : none
+*******************************************************************************/
+void usb0_api_function_clear_pid_stall (uint16_t pipe)
+{
+ usb0_function_clear_pid_stall(pipe);
+}
+
+/*******************************************************************************
+* Function Name: usb0_api_function_get_pid
+* Description : Returns the pipe state specified by the argument.
+* Arguments : uint16_t pipe ; Pipe Number
+* Return Value : PID
+*******************************************************************************/
+uint16_t usb0_api_function_get_pid (uint16_t pipe)
+{
+ uint16_t pid;
+
+ pid = usb0_function_get_pid(pipe);
+
+ return pid;
+}
+
+/*******************************************************************************
+* Function Name: usb0_api_function_check_stall
+* Description :
+* Arguments : uint16_t pipe ; Pipe Number
+* Return Value : PID
+*******************************************************************************/
+int32_t usb0_api_function_check_stall (uint16_t pipe)
+{
+ uint16_t pid;
+
+ pid = usb0_function_get_pid(pipe);
+
+ if ((pid & DEVDRV_USBF_PID_STALL) == DEVDRV_USBF_PID_STALL)
+ {
+ return DEVDRV_USBF_STALL;
+ }
+
+ return DEVDRV_SUCCESS;
+}
+
+/*******************************************************************************
+* Function Name: usb0_api_function_set_sqclr
+* Description : Sets the sequence bit of the pipe specified by the argument to
+* : DATA0.
+* Arguments : uint16_t pipe ; Pipe Number
+* Return Value : none
+*******************************************************************************/
+void usb0_api_function_set_sqclr (uint16_t pipe)
+{
+ usb0_function_set_sqclr(pipe);
+}
+
+/*******************************************************************************
+* Function Name: usb0_api_function_set_sqset
+* Description : Sets the sequence bit of the pipe specified by the argument to
+* : DATA1.
+* Arguments : uint16_t pipe ; Pipe number
+* Return Value : none
+*******************************************************************************/
+void usb0_api_function_set_sqset (uint16_t pipe)
+{
+ usb0_function_set_sqset(pipe);
+}
+
+/*******************************************************************************
+* Function Name: usb0_api_function_set_csclr
+* Description : CSPLIT status clear setting of sprit transaction in specified
+* : pipe is performed.
+* : When SQSET bit or SQCLR bit, and SQSET bit or SQCLR bit
+* : in DCPCTR register are continuously changed (when the sequence
+* : toggle bit of data PID is continuously changed over two or more pipes),
+* : the access cycle with 120 ns and more than 5 cycle bus clock is necessary.
+* : Do not set both SQCLR bit and SQSET bit to 1 at the same time.
+* : In addition, both bits should be operated after PID is set to NAK.
+* : However, when it is set to the isochronous transfer as the transfer type
+* : (TYPE=11), writing in SQSET bit is disabled.
+* Arguments : uint16_t pipe ; Pipe number
+* Return Value : none
+*******************************************************************************/
+void usb0_api_function_set_csclr (uint16_t pipe)
+{
+ usb0_function_set_csclr(pipe);
+}
+
+/*******************************************************************************
+* Function Name: usb0_api_function_set_curpipe
+* Description : Allocates FIF0 specifed by the argument in the pipe assigned
+* : by the argument.
+* Arguments : uint16_t pipe ; Pipe Number
+* : uint16_t fifosel ; Select FIFO
+* : uint16_t isel ; FIFO Access Direction
+* : uint16_t mbw ; FIFO Port Access Bit Width
+* Return Value : none
+*******************************************************************************/
+void usb0_api_function_set_curpipe (uint16_t pipe, uint16_t fifosel, uint16_t isel, uint16_t mbw)
+{
+ usb0_function_set_curpipe(pipe, fifosel, isel, mbw);
+}
+
+/*******************************************************************************
+* Function Name: usb0_api_function_clear_brdy_sts
+* Description : Clear BRDY interrupt status in the pipe spceified by the argument.
+* Arguments : uint16_t pipe ; pipe Number
+* Return Value : none
+*******************************************************************************/
+void usb0_api_function_clear_brdy_sts (uint16_t pipe)
+{
+ usb0_function_clear_brdy_sts(pipe);
+}
+
+/*******************************************************************************
+* Function Name: usb0_api_function_clear_bemp_sts
+* Description : Clear BEMP interrupt status in the pipe spceified by the argument.
+* Arguments : uint16_t pipe ; pipe Number
+* Return Value : none
+*******************************************************************************/
+void usb0_api_function_clear_bemp_sts (uint16_t pipe)
+{
+ usb0_function_clear_bemp_sts(pipe);
+}
+
+/*******************************************************************************
+* Function Name: usb0_api_function_clear_nrdy_sts
+* Description : Clear NRDY interrupt status in the pipe spceified by the argument.
+* Arguments : uint16_t pipe ; pipe Number
+* Return Value : none
+*******************************************************************************/
+void usb0_api_function_clear_nrdy_sts (uint16_t pipe)
+{
+ usb0_function_clear_nrdy_sts(pipe);
+}
+
+/* End of File */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/USBDevice/TARGET_RENESAS/TARGET_VK_RZ_A1H/usb0/src/function/usb0_function_controlrw.c Fri Apr 29 01:16:25 2016 +0100
@@ -0,0 +1,142 @@
+/*******************************************************************************
+* DISCLAIMER
+* This software is supplied by Renesas Electronics Corporation and is only
+* intended for use with Renesas products. No other uses are authorized. This
+* software is owned by Renesas Electronics Corporation and is protected under
+* all applicable laws, including copyright laws.
+* THIS SOFTWARE IS PROVIDED "AS IS" AND RENESAS MAKES NO WARRANTIES REGARDING
+* THIS SOFTWARE, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING BUT NOT
+* LIMITED TO WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE
+* AND NON-INFRINGEMENT. ALL SUCH WARRANTIES ARE EXPRESSLY DISCLAIMED.
+* TO THE MAXIMUM EXTENT PERMITTED NOT PROHIBITED BY LAW, NEITHER RENESAS
+* ELECTRONICS CORPORATION NOR ANY OF ITS AFFILIATED COMPANIES SHALL BE LIABLE
+* FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR
+* ANY REASON RELATED TO THIS SOFTWARE, EVEN IF RENESAS OR ITS AFFILIATES HAVE
+* BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
+* Renesas reserves the right, without notice, to make changes to this software
+* and to discontinue the availability of this software. By using this software,
+* you agree to the additional terms and conditions found by accessing the
+* following link:
+* http://www.renesas.com/disclaimer
+* Copyright (C) 2012 - 2014 Renesas Electronics Corporation. All rights reserved.
+*******************************************************************************/
+/*******************************************************************************
+* File Name : usb0_function_controlrw.c
+* $Rev: 1116 $
+* $Date:: 2014-07-09 16:29:19 +0900#$
+* Device(s) : RZ/A1H
+* Tool-Chain :
+* OS : None
+* H/W Platform :
+* Description : RZ/A1H R7S72100 USB Sample Program
+* Operation :
+* Limitations :
+*******************************************************************************/
+
+
+/*******************************************************************************
+Includes <System Includes> , "Project Includes"
+*******************************************************************************/
+#include "usb0_function.h"
+
+
+/*******************************************************************************
+Typedef definitions
+*******************************************************************************/
+
+
+/*******************************************************************************
+Macro definitions
+*******************************************************************************/
+
+
+/*******************************************************************************
+Imported global variables and functions (from other files)
+*******************************************************************************/
+
+
+/*******************************************************************************
+Exported global variables and functions (to be accessed by other files)
+*******************************************************************************/
+
+
+/*******************************************************************************
+Private global variables and functions
+*******************************************************************************/
+
+
+/*******************************************************************************
+* Function Name: usb0_api_function_CtrlReadStart
+* Description : Executes the USB control read transfer.
+* : USB host controller <- USB device
+* Arguments : uint16_t size ; Data Size
+* : uint8_t *data ; Data Address
+* Return Value : DEVDRV_USBF_WRITEEND ; End of data write
+* : DEVDRV_USBF_WRITESHRT ; End of short data write
+* : DEVDRV_USBF_WRITING ; Continue of data write
+* : DEVDRV_USBF_FIFOERROR ; FIFO access error
+*******************************************************************************/
+uint16_t usb0_api_function_CtrlReadStart (uint32_t size, uint8_t * data)
+{
+ uint16_t status;
+ uint16_t mbw;
+
+ usb0_function_set_pid_nak(USB_FUNCTION_PIPE0);
+
+ g_usb0_function_data_count[USB_FUNCTION_PIPE0] = size;
+ g_usb0_function_data_pointer[USB_FUNCTION_PIPE0] = data;
+
+ mbw = usb0_function_get_mbw(g_usb0_function_data_count[USB_FUNCTION_PIPE0],
+ (uint32_t)g_usb0_function_data_pointer[USB_FUNCTION_PIPE0]);
+ usb0_function_set_curpipe(USB_FUNCTION_PIPE0, USB_FUNCTION_CUSE, USB_FUNCTION_CFIFO_WRITE, mbw);
+ USB200.CFIFOCTR = USB_FUNCTION_BITBCLR;
+
+ status = usb0_function_write_buffer_c(USB_FUNCTION_PIPE0);
+
+ /* Peripheral Control sequence */
+ switch (status)
+ {
+ case DEVDRV_USBF_WRITESHRT: /* End of data write */
+ case DEVDRV_USBF_WRITEEND: /* End of data write (not null) */
+ case DEVDRV_USBF_WRITING: /* Continue of data write */
+ usb0_function_enable_bemp_int(USB_FUNCTION_PIPE0); /* Enable Empty Interrupt */
+ usb0_function_set_pid_buf(USB_FUNCTION_PIPE0); /* Set BUF */
+ break;
+
+ case DEVDRV_USBF_FIFOERROR: /* FIFO access error */
+ break;
+
+ default:
+ break;
+ }
+
+ return status; /* End or Err or Continue */
+}
+
+/*******************************************************************************
+* Function Name: usb0_api_function_CtrlWriteStart
+* Description : Executes the USB control write transfer.
+* : USB host controller -> USB device
+* Arguments : uint16_t size ; Data Size
+* : uint8_t *data ; Data Address
+* Return Value : none
+*******************************************************************************/
+void usb0_api_function_CtrlWriteStart (uint32_t size, uint8_t * data)
+{
+ uint16_t mbw;
+
+ usb0_function_set_pid_nak(USB_FUNCTION_PIPE0);
+
+ g_usb0_function_data_count[USB_FUNCTION_PIPE0] = size;
+ g_usb0_function_data_pointer[USB_FUNCTION_PIPE0] = data;
+
+ mbw = usb0_function_get_mbw(g_usb0_function_data_count[USB_FUNCTION_PIPE0],
+ (uint32_t)g_usb0_function_data_pointer[USB_FUNCTION_PIPE0]);
+ usb0_function_set_curpipe(USB_FUNCTION_PIPE0, USB_FUNCTION_CUSE, USB_FUNCTION_CFIFO_WRITE, mbw);
+ USB200.CFIFOCTR = USB_FUNCTION_BITBCLR;
+
+ usb0_function_enable_brdy_int(USB_FUNCTION_PIPE0);
+ usb0_function_set_pid_buf(USB_FUNCTION_PIPE0);
+}
+
+/* End of File */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/USBDevice/TARGET_RENESAS/TARGET_VK_RZ_A1H/usb0/src/function/usb0_function_global.c Fri Apr 29 01:16:25 2016 +0100
@@ -0,0 +1,144 @@
+/*******************************************************************************
+* DISCLAIMER
+* This software is supplied by Renesas Electronics Corporation and is only
+* intended for use with Renesas products. No other uses are authorized. This
+* software is owned by Renesas Electronics Corporation and is protected under
+* all applicable laws, including copyright laws.
+* THIS SOFTWARE IS PROVIDED "AS IS" AND RENESAS MAKES NO WARRANTIES REGARDING
+* THIS SOFTWARE, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING BUT NOT
+* LIMITED TO WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE
+* AND NON-INFRINGEMENT. ALL SUCH WARRANTIES ARE EXPRESSLY DISCLAIMED.
+* TO THE MAXIMUM EXTENT PERMITTED NOT PROHIBITED BY LAW, NEITHER RENESAS
+* ELECTRONICS CORPORATION NOR ANY OF ITS AFFILIATED COMPANIES SHALL BE LIABLE
+* FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR
+* ANY REASON RELATED TO THIS SOFTWARE, EVEN IF RENESAS OR ITS AFFILIATES HAVE
+* BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
+* Renesas reserves the right, without notice, to make changes to this software
+* and to discontinue the availability of this software. By using this software,
+* you agree to the additional terms and conditions found by accessing the
+* following link:
+* http://www.renesas.com/disclaimer
+* Copyright (C) 2012 - 2014 Renesas Electronics Corporation. All rights reserved.
+*******************************************************************************/
+/*******************************************************************************
+* File Name : usb0_function_global.c
+* $Rev: 1116 $
+* $Date:: 2014-07-09 16:29:19 +0900#$
+* Device(s) : RZ/A1H
+* Tool-Chain :
+* OS : None
+* H/W Platform :
+* Description : RZ/A1H R7S72100 USB Sample Program
+* Operation :
+* Limitations :
+*******************************************************************************/
+
+
+/*******************************************************************************
+Includes <System Includes> , "Project Includes"
+*******************************************************************************/
+#include "usb0_function.h"
+
+
+/*******************************************************************************
+Typedef definitions
+*******************************************************************************/
+
+
+/*******************************************************************************
+Macro definitions
+*******************************************************************************/
+
+
+/*******************************************************************************
+Imported global variables and functions (from other files)
+*******************************************************************************/
+
+
+/*******************************************************************************
+Exported global variables and functions (to be accessed by other files)
+*******************************************************************************/
+
+
+/*******************************************************************************
+Private global variables and functions
+*******************************************************************************/
+const uint16_t g_usb0_function_bit_set[16] =
+{
+ 0x0001, 0x0002, 0x0004, 0x0008,
+ 0x0010, 0x0020, 0x0040, 0x0080,
+ 0x0100, 0x0200, 0x0400, 0x0800,
+ 0x1000, 0x2000, 0x4000, 0x8000
+};
+
+uint32_t g_usb0_function_data_count[USB_FUNCTION_MAX_PIPE_NO + 1];
+uint8_t * g_usb0_function_data_pointer[USB_FUNCTION_MAX_PIPE_NO + 1];
+
+uint16_t g_usb0_function_PipeIgnore[USB_FUNCTION_MAX_PIPE_NO + 1];
+uint16_t g_usb0_function_PipeTbl[USB_FUNCTION_MAX_PIPE_NO + 1];
+uint16_t g_usb0_function_pipe_status[USB_FUNCTION_MAX_PIPE_NO + 1];
+uint32_t g_usb0_function_PipeDataSize[USB_FUNCTION_MAX_PIPE_NO + 1];
+
+USB_FUNCTION_DMA_t g_usb0_function_DmaInfo[2];
+uint16_t g_usb0_function_DmaPipe[2];
+uint16_t g_usb0_function_DmaBval[2];
+uint16_t g_usb0_function_DmaStatus[2];
+
+uint16_t g_usb0_function_CtrZeroLengthFlag;
+
+//uint16_t g_usb0_function_ConfigNum;
+//uint16_t g_usb0_function_Alternate[USB_FUNCTION_ALT_NO];
+//uint16_t g_usb0_function_RemoteWakeupFlag;
+uint16_t g_usb0_function_TestModeFlag;
+uint16_t g_usb0_function_TestModeSelectors;
+
+//uint16_t g_usb0_function_ReqType;
+//uint16_t g_usb0_function_ReqTypeType;
+//uint16_t g_usb0_function_ReqTypeRecip;
+//uint16_t g_usb0_function_ReqRequest;
+//uint16_t g_usb0_function_ReqValue;
+//uint16_t g_usb0_function_ReqIndex;
+//uint16_t g_usb0_function_ReqLength;
+
+//uint16_t g_usb0_function_EPTableIndex[USB_FUNCTION_MAX_EP_NO + 1];
+
+uint16_t g_usb0_function_pipecfg[USB_FUNCTION_MAX_PIPE_NO + 1];
+uint16_t g_usb0_function_pipebuf[USB_FUNCTION_MAX_PIPE_NO + 1];
+uint16_t g_usb0_function_pipemaxp[USB_FUNCTION_MAX_PIPE_NO + 1];
+uint16_t g_usb0_function_pipeperi[USB_FUNCTION_MAX_PIPE_NO + 1];
+
+
+/*******************************************************************************
+* Function Name: usb0_function_init_status
+* Description : Initialization USB Sample Driver Variable.
+* Arguments : none
+* Return Value : none
+*******************************************************************************/
+void usb0_function_init_status (void)
+{
+ uint16_t pipe;
+
+ //g_usb0_function_ConfigNum = 0;
+ //g_usb0_function_RemoteWakeupFlag = DEVDRV_USBF_OFF;
+ g_usb0_function_TestModeFlag = DEVDRV_USBF_OFF;
+ g_usb0_function_CtrZeroLengthFlag = 0;
+
+#if 0
+ usb0_function_clear_alt();
+#endif
+
+ for (pipe = 0; pipe < (USB_FUNCTION_MAX_PIPE_NO + 1); ++pipe)
+ {
+ g_usb0_function_pipe_status[pipe] = DEVDRV_USBF_PIPE_IDLE;
+ g_usb0_function_PipeDataSize[pipe] = 0;
+ g_usb0_function_data_count[pipe] = 0;
+
+ /* pipe configuration in usb0_function_ResetEP() */
+ g_usb0_function_pipecfg[pipe] = 0;
+ g_usb0_function_pipebuf[pipe] = 0;
+ g_usb0_function_pipemaxp[pipe] = 0;
+ g_usb0_function_pipeperi[pipe] = 0;
+ }
+}
+
+/* End of File */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/USBDevice/TARGET_RENESAS/TARGET_VK_RZ_A1H/usb0/src/function/usb0_function_sig.c Fri Apr 29 01:16:25 2016 +0100
@@ -0,0 +1,330 @@
+/*******************************************************************************
+* DISCLAIMER
+* This software is supplied by Renesas Electronics Corporation and is only
+* intended for use with Renesas products. No other uses are authorized. This
+* software is owned by Renesas Electronics Corporation and is protected under
+* all applicable laws, including copyright laws.
+* THIS SOFTWARE IS PROVIDED "AS IS" AND RENESAS MAKES NO WARRANTIES REGARDING
+* THIS SOFTWARE, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING BUT NOT
+* LIMITED TO WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE
+* AND NON-INFRINGEMENT. ALL SUCH WARRANTIES ARE EXPRESSLY DISCLAIMED.
+* TO THE MAXIMUM EXTENT PERMITTED NOT PROHIBITED BY LAW, NEITHER RENESAS
+* ELECTRONICS CORPORATION NOR ANY OF ITS AFFILIATED COMPANIES SHALL BE LIABLE
+* FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR
+* ANY REASON RELATED TO THIS SOFTWARE, EVEN IF RENESAS OR ITS AFFILIATES HAVE
+* BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
+* Renesas reserves the right, without notice, to make changes to this software
+* and to discontinue the availability of this software. By using this software,
+* you agree to the additional terms and conditions found by accessing the
+* following link:
+* http://www.renesas.com/disclaimer
+* Copyright (C) 2012 - 2014 Renesas Electronics Corporation. All rights reserved.
+*******************************************************************************/
+/*******************************************************************************
+* File Name : usb0_function_sig.c
+* $Rev: 1116 $
+* $Date:: 2014-07-09 16:29:19 +0900#$
+* Device(s) : RZ/A1H
+* Tool-Chain :
+* OS : None
+* H/W Platform :
+* Description : RZ/A1H R7S72100 USB Sample Program
+* Operation :
+* Limitations :
+*******************************************************************************/
+
+
+/*******************************************************************************
+Includes <System Includes> , "Project Includes"
+*******************************************************************************/
+#include "usb0_function.h"
+
+
+/*******************************************************************************
+Typedef definitions
+*******************************************************************************/
+
+
+/*******************************************************************************
+Macro definitions
+*******************************************************************************/
+
+
+/*******************************************************************************
+Imported global variables and functions (from other files)
+*******************************************************************************/
+
+
+/*******************************************************************************
+Exported global variables and functions (to be accessed by other files)
+*******************************************************************************/
+static void usb0_function_EnableINTModule(void);
+
+
+/*******************************************************************************
+Private global variables and functions
+*******************************************************************************/
+
+
+/*******************************************************************************
+* Function Name: usb0_function_InitModule
+* Description : Initializes the USB module in the USB function mode.
+* Arguments : uint16_t mode ; USB_FUNCTION_HIGH_SPEED ; Hi-Speed Mode
+* : ; other ; Full-speed Mode
+* Return Value : none
+*******************************************************************************/
+void usb0_function_InitModule (uint16_t mode)
+{
+ RZA_IO_RegWrite_16(&USB200.SYSCFG0,
+ 0,
+ USB_SYSCFG_DCFM_SHIFT,
+ USB_SYSCFG_DCFM); /* USB function */
+
+ /* USB module operation enabled */
+ RZA_IO_RegWrite_16(&USB200.SYSCFG0,
+ 1,
+ USB_SYSCFG_USBE_SHIFT,
+ USB_SYSCFG_USBE);
+
+ if (mode == USB_FUNCTION_HIGH_SPEED)
+ {
+ RZA_IO_RegWrite_16(&USB200.SYSCFG0,
+ 1,
+ USB_SYSCFG_HSE_SHIFT,
+ USB_SYSCFG_HSE); /* Hi-Speed Mode */
+ }
+ else
+ {
+ RZA_IO_RegWrite_16(&USB200.SYSCFG0,
+ 0,
+ USB_SYSCFG_HSE_SHIFT,
+ USB_SYSCFG_HSE);
+ }
+
+ /* for power-on */
+ if (usb0_function_CheckVBUStaus() == DEVDRV_USBF_ON)
+ {
+ usb0_function_EnableINTModule(); /* Interrupt Enable */
+ usb0_function_USB_FUNCTION_Attach(); /* pull-up D+ and open D- */
+ }
+ else
+ {
+ usb0_function_USB_FUNCTION_Detach(); /* USB Detach */
+ /* with Interrupt Enable */
+ }
+}
+
+/*******************************************************************************
+* Function Name: usb0_function_CheckVBUStaus
+* Description : Checks the USB-VBUS state to returns the connection state to
+* : the USB host.
+* Arguments : none
+* Return Value : DEVDRV_USBF_ON : VBUS ON
+* : DEVDRV_USBF_OFF : VBUS OFF
+*******************************************************************************/
+uint16_t usb0_function_CheckVBUStaus (void)
+{
+ uint16_t buf1;
+ uint16_t buf2;
+ uint16_t buf3;
+
+ /* monitor VBUS pins */
+ do
+ {
+ buf1 = RZA_IO_RegRead_16(&USB200.INTSTS0,
+ USB_INTSTS0_VBSTS_SHIFT,
+ USB_INTSTS0_VBSTS);
+ Userdef_USB_usb0_function_delay_10us(1);
+ buf2 = RZA_IO_RegRead_16(&USB200.INTSTS0,
+ USB_INTSTS0_VBSTS_SHIFT,
+ USB_INTSTS0_VBSTS);
+ Userdef_USB_usb0_function_delay_10us(1);
+ buf3 = RZA_IO_RegRead_16(&USB200.INTSTS0,
+ USB_INTSTS0_VBSTS_SHIFT,
+ USB_INTSTS0_VBSTS);
+ } while ((buf1 != buf2) || (buf2 != buf3));
+
+ if (buf1 == DEVDRV_USBF_OFF)
+ {
+ return DEVDRV_USBF_OFF; /* detach */
+ }
+
+ return DEVDRV_USBF_ON; /* attach */
+}
+
+/*******************************************************************************
+* Function Name: usb0_function_USB_FUNCTION_Attach
+* Description : Connects to the USB host controller.
+* : This function pulls up D+.
+* Arguments : none
+* Return Value : none
+*******************************************************************************/
+void usb0_function_USB_FUNCTION_Attach (void)
+{
+ Userdef_USB_usb0_function_attach();
+
+ Userdef_USB_usb0_function_delay_xms(10);
+
+ RZA_IO_RegWrite_16(&USB200.SYSCFG0,
+ 1,
+ USB_SYSCFG_DPRPU_SHIFT,
+ USB_SYSCFG_DPRPU); /* Pull-up D+ and open D- */
+}
+
+/*******************************************************************************
+* Function Name: usb0_function_USB_FUNCTION_Detach
+* Description : Disconnects from the USB host controller.
+* : This function opens D+/D-.
+* Arguments : none
+* Return Value : none
+*******************************************************************************/
+void usb0_function_USB_FUNCTION_Detach (void)
+{
+ uint16_t pipe;
+
+ Userdef_USB_usb0_function_detach();
+
+ for (pipe = 0; pipe < (USB_FUNCTION_MAX_PIPE_NO + 1); ++pipe)
+ {
+ if (g_usb0_function_pipe_status[pipe] != DEVDRV_USBF_PIPE_IDLE)
+ {
+ usb0_function_stop_transfer(pipe);
+ }
+ }
+
+ RZA_IO_RegWrite_16(&USB200.SYSCFG0,
+ 0,
+ USB_SYSCFG_DPRPU_SHIFT,
+ USB_SYSCFG_DPRPU); /* open D+ and D- */
+
+ /* Detach Recovery */
+ Userdef_USB_usb0_function_delay_500ns(); /* need 1us=500ns * 2 wait */
+ Userdef_USB_usb0_function_delay_500ns();
+
+ RZA_IO_RegWrite_16(&USB200.SYSCFG0,
+ 1,
+ USB_SYSCFG_DCFM_SHIFT,
+ USB_SYSCFG_DCFM);
+ Userdef_USB_usb0_function_delay_500ns(); /* need 100ns wait but 500ns S/W wait */
+
+ RZA_IO_RegWrite_16(&USB200.SYSCFG0,
+ 0,
+ USB_SYSCFG_DCFM_SHIFT,
+ USB_SYSCFG_DCFM);
+
+ RZA_IO_RegWrite_16(&USB200.SYSCFG0,
+ 0,
+ USB_SYSCFG_USBE_SHIFT,
+ USB_SYSCFG_USBE); /* soft reset module */
+ Userdef_USB_usb0_function_delay_500ns();
+
+ RZA_IO_RegWrite_16(&USB200.SYSCFG0,
+ 1,
+ USB_SYSCFG_USBE_SHIFT,
+ USB_SYSCFG_USBE);
+
+ usb0_function_EnableINTModule(); /* Interrupt Enable */
+}
+
+/*******************************************************************************
+* Function Name: usb0_function_USB_FUNCTION_BusReset
+* Description : This function is executed when the USB device is transitioned
+* : to POWERD_STATE. Sets the device descriptor according to the
+* : connection speed determined by the USB reset hand shake.
+* Arguments : none
+* Return Value : none
+*******************************************************************************/
+#if 0 /*The USBHAL in mbed does not need this function*/
+void usb0_function_USB_FUNCTION_BusReset (void)
+{
+ usb0_function_init_status(); /* memory clear */
+
+ if (usb0_function_is_hispeed() == USB_FUNCTION_HIGH_SPEED)
+ {
+ usb0_function_ResetDescriptor(USB_FUNCTION_HIGH_SPEED); /* Device Descriptor reset */
+ }
+ else
+ {
+ usb0_function_ResetDescriptor(USB_FUNCTION_FULL_SPEED); /* Device Descriptor reset */
+ }
+
+ usb0_function_ResetDCP(); /* Default Control PIPE reset */
+}
+#endif
+
+/*******************************************************************************
+* Function Name: usb0_function_USB_FUNCTION_Resume
+* Description : This function is executed when the USB device detects a resume
+* : signal.
+* : The USB sample driver does not operate for this function.
+* Arguments : none
+* Return Value : none
+*******************************************************************************/
+#if 0 /*The USBHAL in mbed does not need this function*/
+void usb0_function_USB_FUNCTION_Resume (void)
+{
+ /* NOP */
+}
+#endif
+
+/*******************************************************************************
+* Function Name: usb0_function_USB_FUNCTION_Suspend
+* Description : This function is executed when the USB device detects a suspend
+* : signal.
+* : The USB sample driver does not operate for this function.
+* Arguments : none
+* Return Value : none
+*******************************************************************************/
+#if 0 /*The USBHAL in mbed does not need this function*/
+void usb0_function_USB_FUNCTION_Suspend (void)
+{
+ /* NOP */
+}
+#endif
+
+/*******************************************************************************
+* Function Name: usb0_function_USB_FUNCTION_TestMode
+* Description : This function is executed when the USB device is transitioned U
+* : to TEST_MODE by the USB standard request.
+* Arguments : none
+* Return Value : none
+*******************************************************************************/
+void usb0_function_USB_FUNCTION_TestMode (void)
+{
+ switch (g_usb0_function_TestModeSelectors & USB_FUNCTION_FUNCTION_TEST_SELECT)
+ {
+ case USB_FUNCTION_FUNCTION_TEST_J:
+ case USB_FUNCTION_FUNCTION_TEST_K:
+ case USB_FUNCTION_FUNCTION_TEST_SE0_NAK:
+ case USB_FUNCTION_FUNCTION_TEST_PACKET:
+ RZA_IO_RegWrite_16(&USB200.TESTMODE,
+ (g_usb0_function_TestModeSelectors >> 8),
+ USB_TESTMODE_UTST_SHIFT,
+ USB_TESTMODE_UTST);
+ break;
+
+ case USB_FUNCTION_FUNCTION_TEST_FORCE_ENABLE:
+ default:
+ break;
+ }
+}
+
+/*******************************************************************************
+* Function Name: usb0_function_EnableINTModule
+* Description : Enables USB interrupt.
+* Arguments : none
+* Return Value : none
+*******************************************************************************/
+static void usb0_function_EnableINTModule (void)
+{
+ uint16_t buf;
+
+ buf = USB200.INTENB0;
+ buf |= (USB_FUNCTION_BITVBSE | USB_FUNCTION_BITDVSE | USB_FUNCTION_BITCTRE |
+ USB_FUNCTION_BITBEMPE | USB_FUNCTION_BITNRDYE | USB_FUNCTION_BITBRDYE);
+ USB200.INTENB0 = buf;
+
+ usb0_function_enable_bemp_int(USB_FUNCTION_PIPE0);
+}
+
+/* End of File */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/USBDevice/TARGET_RENESAS/TARGET_VK_RZ_A1H/usb0/src/function/usb0_function_sub.c Fri Apr 29 01:16:25 2016 +0100
@@ -0,0 +1,453 @@
+/*******************************************************************************
+* DISCLAIMER
+* This software is supplied by Renesas Electronics Corporation and is only
+* intended for use with Renesas products. No other uses are authorized. This
+* software is owned by Renesas Electronics Corporation and is protected under
+* all applicable laws, including copyright laws.
+* THIS SOFTWARE IS PROVIDED "AS IS" AND RENESAS MAKES NO WARRANTIES REGARDING
+* THIS SOFTWARE, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING BUT NOT
+* LIMITED TO WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE
+* AND NON-INFRINGEMENT. ALL SUCH WARRANTIES ARE EXPRESSLY DISCLAIMED.
+* TO THE MAXIMUM EXTENT PERMITTED NOT PROHIBITED BY LAW, NEITHER RENESAS
+* ELECTRONICS CORPORATION NOR ANY OF ITS AFFILIATED COMPANIES SHALL BE LIABLE
+* FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR
+* ANY REASON RELATED TO THIS SOFTWARE, EVEN IF RENESAS OR ITS AFFILIATES HAVE
+* BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
+* Renesas reserves the right, without notice, to make changes to this software
+* and to discontinue the availability of this software. By using this software,
+* you agree to the additional terms and conditions found by accessing the
+* following link:
+* http://www.renesas.com/disclaimer
+* Copyright (C) 2012 - 2014 Renesas Electronics Corporation. All rights reserved.
+*******************************************************************************/
+/*******************************************************************************
+* File Name : usb0_function_sub.c
+* $Rev: 1116 $
+* $Date:: 2014-07-09 16:29:19 +0900#$
+* Device(s) : RZ/A1H
+* Tool-Chain :
+* OS : None
+* H/W Platform :
+* Description : RZ/A1H R7S72100 USB Sample Program
+* Operation :
+* Limitations :
+*******************************************************************************/
+
+
+/*******************************************************************************
+Includes <System Includes> , "Project Includes"
+*******************************************************************************/
+#include "usb0_function.h"
+
+
+/*******************************************************************************
+Typedef definitions
+*******************************************************************************/
+
+
+/*******************************************************************************
+Macro definitions
+*******************************************************************************/
+
+
+/*******************************************************************************
+Imported global variables and functions (from other files)
+*******************************************************************************/
+#if 0
+extern const uint16_t *g_usb0_function_EndPntPtr[];
+extern uint8_t g_usb0_function_DeviceDescriptor[];
+extern uint8_t *g_usb0_function_ConfigurationPtr[];
+#endif
+
+
+/*******************************************************************************
+Exported global variables and functions (to be accessed by other files)
+*******************************************************************************/
+
+
+/*******************************************************************************
+Private global variables and functions
+*******************************************************************************/
+
+
+/*******************************************************************************
+* Function Name: usb0_function_ResetDCP
+* Description : Initializes the default control pipe(DCP).
+* Outline : Reset default control pipe
+* Arguments : none
+* Return Value : none
+*******************************************************************************/
+void usb0_function_ResetDCP (void)
+{
+ USB200.DCPCFG = 0;
+#if 0
+ USB200.DCPMAXP = g_usb0_function_DeviceDescriptor[7];
+#else
+ USB200.DCPMAXP = 64;
+#endif
+
+ USB200.CFIFOSEL = (uint16_t)(USB_FUNCTION_BITMBW_8 | USB_FUNCTION_BITBYTE_LITTLE);
+ USB200.D0FIFOSEL = (uint16_t)(USB_FUNCTION_BITMBW_8 | USB_FUNCTION_BITBYTE_LITTLE);
+ USB200.D1FIFOSEL = (uint16_t)(USB_FUNCTION_BITMBW_8 | USB_FUNCTION_BITBYTE_LITTLE);
+}
+
+/*******************************************************************************
+* Function Name: usb0_function_ResetEP
+* Description : Initializes the end point.
+* Arguments : uint16_t num ; Configuration Number
+* Return Value : none
+*******************************************************************************/
+#if 0
+void usb0_function_ResetEP (uint16_t num)
+{
+ uint16_t pipe;
+ uint16_t ep;
+ uint16_t index;
+ uint16_t buf;
+ uint16_t * tbl;
+
+ tbl = (uint16_t *)(g_usb0_function_EndPntPtr[num - 1]);
+
+ for (ep = 1; ep <= USB_FUNCTION_MAX_EP_NO; ++ep)
+ {
+ if (g_usb0_function_EPTableIndex[ep] != USB_FUNCTION_EP_ERROR)
+ {
+ index = (uint16_t)(USB_FUNCTION_EPTABLE_LENGTH * g_usb0_function_EPTableIndex[ep]);
+ pipe = (uint16_t)(tbl[index + 0] & USB_FUNCTION_BITCURPIPE);
+
+ g_usb0_function_PipeTbl[pipe] = (uint16_t)( ((tbl[index + 1] & USB_FUNCTION_DIRFIELD) << 3) |
+ ep |
+ (tbl[index + 0] & USB_FUNCTION_FIFO_USE) );
+
+ if ((tbl[index + 1] & USB_FUNCTION_DIRFIELD) == USB_FUNCTION_DIR_P_OUT)
+ {
+ tbl[index + 1] |= USB_FUNCTION_SHTNAKON;
+#ifdef __USB_DMA_BFRE_ENABLE__
+ /* this routine cannnot be perfomred if read operation is executed in buffer size */
+ if (((tbl[index + 0] & USB_FUNCTION_FIFO_USE) == USB_FUNCTION_D0FIFO_DMA) ||
+ ((tbl[index + 0] & USB_FUNCTION_FIFO_USE) == USB_FUNCTION_D1FIFO_DMA))
+ {
+ tbl[index + 1] |= USB_FUNCTION_BFREON;
+ }
+#endif
+ }
+
+ /* Interrupt Disable */
+ buf = USB200.BRDYENB;
+ buf &= (uint16_t)~g_usb0_function_bit_set[pipe];
+ USB200.BRDYENB = buf;
+ buf = USB200.NRDYENB;
+ buf &= (uint16_t)~g_usb0_function_bit_set[pipe];
+ USB200.NRDYENB = buf;
+ buf = USB200.BEMPENB;
+ buf &= (uint16_t)~g_usb0_function_bit_set[pipe];
+ USB200.BEMPENB = buf;
+
+ usb0_function_set_pid_nak(pipe);
+
+ /* CurrentPIPE Clear */
+ if (RZA_IO_RegRead_16(&USB200.CFIFOSEL,
+ USB_CFIFOSEL_CURPIPE_SHIFT,
+ USB_CFIFOSEL_CURPIPE) == pipe)
+ {
+ RZA_IO_RegWrite_16(&USB200.CFIFOSEL,
+ 0,
+ USB_CFIFOSEL_CURPIPE_SHIFT,
+ USB_CFIFOSEL_CURPIPE);
+ }
+
+ if (RZA_IO_RegRead_16(&USB200.D0FIFOSEL,
+ USB_DnFIFOSEL_CURPIPE_SHIFT,
+ USB_DnFIFOSEL_CURPIPE) == pipe)
+ {
+ RZA_IO_RegWrite_16(&USB200.D0FIFOSEL,
+ 0,
+ USB_DnFIFOSEL_CURPIPE_SHIFT,
+ USB_DnFIFOSEL_CURPIPE);
+ }
+
+ if (RZA_IO_RegRead_16(&USB200.D1FIFOSEL,
+ USB_DnFIFOSEL_CURPIPE_SHIFT,
+ USB_DnFIFOSEL_CURPIPE) == pipe)
+ {
+ RZA_IO_RegWrite_16(&USB200.D1FIFOSEL,
+ 0,
+ USB_DnFIFOSEL_CURPIPE_SHIFT,
+ USB_DnFIFOSEL_CURPIPE);
+ }
+
+ /* PIPE Configuration */
+ USB200.PIPESEL = pipe;
+ USB200.PIPECFG = tbl[index + 1];
+ USB200.PIPEBUF = tbl[index + 2];
+ USB200.PIPEMAXP = tbl[index + 3];
+ USB200.PIPEPERI = tbl[index + 4];
+
+ g_usb0_function_pipecfg[pipe] = tbl[index + 1];
+ g_usb0_function_pipebuf[pipe] = tbl[index + 2];
+ g_usb0_function_pipemaxp[pipe] = tbl[index + 3];
+ g_usb0_function_pipeperi[pipe] = tbl[index + 4];
+
+ /* Buffer Clear */
+ usb0_function_set_sqclr(pipe);
+ usb0_function_aclrm(pipe);
+
+ /* init Global */
+ g_usb0_function_pipe_status[pipe] = DEVDRV_USBF_PIPE_IDLE;
+ g_usb0_function_PipeDataSize[pipe] = 0;
+ }
+ }
+}
+#endif
+
+/*******************************************************************************
+* Function Name: usb0_function_EpToPipe
+* Description : Returns the pipe which end point specified by the argument is
+* : allocated to.
+* Arguments : uint16_t ep ; Direction + Endpoint Number
+* Return Value : USB_FUNCTION_EP_ERROR : Error
+* : Others : Pipe Number
+*******************************************************************************/
+uint16_t usb0_function_EpToPipe (uint16_t ep)
+{
+ uint16_t pipe;
+
+ for (pipe = 1; pipe <= USB_FUNCTION_MAX_PIPE_NO; pipe++)
+ {
+ if ((g_usb0_function_PipeTbl[pipe] & 0x00ff) == ep)
+ {
+ return pipe;
+ }
+ }
+
+ return USB_FUNCTION_EP_ERROR;
+}
+
+/*******************************************************************************
+* Function Name: usb0_function_InitEPTable
+* Description : Sets the end point by the Alternate setting value of the
+* : configuration number and the interface number specified by the
+* : argument.
+* Arguments : uint16_t Con_Num ; Configuration Number
+* : uint16_t Int_Num ; Interface Number
+* : uint16_t Alt_Num ; Alternate Setting
+* Return Value : none
+*******************************************************************************/
+#if 0
+void usb0_function_InitEPTable (uint16_t Con_Num, uint16_t Int_Num, uint16_t Alt_Num)
+{
+ uint8_t * ptr;
+ uint16_t point_interface;
+ uint16_t point_endpoint;
+ uint16_t length;
+ uint16_t start;
+ uint16_t numbers;
+ uint16_t endpoint;
+
+ ptr = (uint8_t *)g_usb0_function_ConfigurationPtr[Con_Num - 1];
+ point_interface = *ptr;
+ length = (uint16_t)((uint16_t)*(ptr + 3) << 8 | (uint16_t)*(ptr + 2));
+ ptr += *ptr;
+ start = 0;
+ numbers = 0;
+ point_endpoint = 0;
+
+ for (; point_interface < length;)
+ {
+ switch (*(ptr + 1)) /* Descriptor Type ? */
+ {
+ case USB_FUNCTION_DT_INTERFACE: /* Interface */
+ if ((*(ptr + 2) == Int_Num) && (*(ptr + 3) == Alt_Num))
+ {
+ numbers = *(ptr + 4);
+ }
+ else
+ {
+ start += *(ptr + 4);
+ }
+ point_interface += *ptr;
+ ptr += *ptr;
+ break;
+
+ case USB_FUNCTION_DT_ENDPOINT: /* Endpoint */
+ if (point_endpoint < numbers)
+ {
+ endpoint = (uint16_t)(*(ptr + 2) & 0x0f);
+ g_usb0_function_EPTableIndex[endpoint] = (uint16_t)(start + point_endpoint);
+ ++point_endpoint;
+ }
+ point_interface += *ptr;
+ ptr += *ptr;
+ break;
+
+ case USB_FUNCTION_DT_DEVICE: /* Device */
+ case USB_FUNCTION_DT_CONFIGURATION: /* Configuration */
+ case USB_FUNCTION_DT_STRING: /* String */
+ default: /* Class, Vendor, else */
+ point_interface += *ptr;
+ ptr += *ptr;
+ break;
+ }
+ }
+}
+#endif
+
+/*******************************************************************************
+* Function Name: usb0_function_GetConfigNum
+* Description : Returns the number of configuration referring to the number of
+* : configuration described in the device descriptor.
+* Arguments : none
+* Return Value : Number of possible configurations (bNumConfigurations).
+*******************************************************************************/
+#if 0
+uint16_t usb0_function_GetConfigNum (void)
+{
+ return (uint16_t)g_usb0_function_DeviceDescriptor[17];
+}
+#endif
+
+/*******************************************************************************
+* Function Name: usb0_function_GetInterfaceNum
+* Description : Returns the number of interface referring to the number of
+* : interface described in the configuration descriptor.
+* Arguments : uint16_t num ; Configuration Number
+* Return Value : Number of this interface (bNumInterfaces).
+*******************************************************************************/
+#if 0
+uint16_t usb0_function_GetInterfaceNum (uint16_t num)
+{
+ return (uint16_t)(*(g_usb0_function_ConfigurationPtr[num - 1] + 4));
+}
+#endif
+
+/*******************************************************************************
+* Function Name: usb0_function_GetAltNum
+* Description : Returns the Alternate setting value of the configuration number
+* : and the interface number specified by the argument.
+* Arguments : uint16_t Con_Num ; Configuration Number
+* : uint16_t Int_Num ; Interface Number
+* Return Value : Value used to select this alternate setting(bAlternateSetting).
+*******************************************************************************/
+#if 0
+uint16_t usb0_function_GetAltNum (uint16_t Con_Num, uint16_t Int_Num)
+{
+ uint8_t * ptr;
+ uint16_t point;
+ uint16_t alt_num = 0;
+ uint16_t length;
+
+ ptr = (uint8_t *)(g_usb0_function_ConfigurationPtr[Con_Num - 1]);
+ point = ptr[0];
+ ptr += ptr[0]; /* InterfaceDescriptor[0] */
+ length = (uint16_t)(*(g_usb0_function_ConfigurationPtr[Con_Num - 1] + 2));
+ length |= (uint16_t)((uint16_t)(*(g_usb0_function_ConfigurationPtr[Con_Num - 1] + 3)) << 8);
+
+ for (; point < length;) /* Search Descriptor Table size */
+ {
+ switch (ptr[1]) /* Descriptor Type ? */
+ {
+ case USB_FUNCTION_DT_INTERFACE: /* Interface */
+ if (Int_Num == ptr[2])
+ {
+ alt_num = (uint16_t)ptr[3]; /* Alternate Number count */
+ }
+ point += ptr[0];
+ ptr += ptr[0];
+ break;
+
+ case USB_FUNCTION_DT_DEVICE: /* Device */
+ case USB_FUNCTION_DT_CONFIGURATION: /* Configuration */
+ case USB_FUNCTION_DT_STRING: /* String */
+ case USB_FUNCTION_DT_ENDPOINT: /* Endpoint */
+ default: /* Class, Vendor, else */
+ point += ptr[0];
+ ptr += ptr[0];
+ break;
+ }
+ }
+ return alt_num;
+}
+#endif
+
+/*******************************************************************************
+* Function Name: usb0_function_CheckRemoteWakeup
+* Description : Returns the result of the remote wake up function is supported
+* : or not referring to the configuration descriptor.
+* Arguments : none
+* Return Value : DEVDRV_USBF_ON : Support Remote Wakeup
+* : DEVDRV_USBF_OFF : not Support Remote Wakeup
+*******************************************************************************/
+#if 0
+uint16_t usb0_function_CheckRemoteWakeup (void)
+{
+ uint8_t atr;
+
+ if (g_usb0_function_ConfigNum == 0)
+ {
+ return DEVDRV_USBF_OFF;
+ }
+
+ atr = *(g_usb0_function_ConfigurationPtr[g_usb0_function_ConfigNum - 1] + 7);
+
+ if (atr & USB_FUNCTION_CF_RWUP)
+ {
+ return DEVDRV_USBF_ON;
+ }
+
+ return DEVDRV_USBF_OFF;
+}
+#endif
+
+/*******************************************************************************
+* Function Name: usb0_function_clear_alt
+* Description : Initializes the Alternate setting area.
+* Arguments : none
+* Return Value : none
+*******************************************************************************/
+#if 0
+void usb0_function_clear_alt (void)
+{
+ int i;
+
+ for (i = 0; i < USB_FUNCTION_ALT_NO; ++i)
+ {
+ g_usb0_function_Alternate[i] = 0; /* Alternate */
+ }
+}
+#endif
+
+/*******************************************************************************
+* Function Name: usb0_function_clear_pipe_tbl
+* Description : Initializes pipe definition table.
+* Arguments : none
+* Return Value : none
+*******************************************************************************/
+void usb0_function_clear_pipe_tbl (void)
+{
+ int pipe;
+
+ for (pipe = 0; pipe < (USB_FUNCTION_MAX_PIPE_NO + 1); ++pipe)
+ {
+ g_usb0_function_PipeTbl[pipe] = 0;
+ }
+}
+
+/*******************************************************************************
+* Function Name: usb0_function_clear_ep_table_index
+* Description : Initializes the end point table index.
+* Arguments : none
+* Return Value : none
+*******************************************************************************/
+#if 0
+void usb0_function_clear_ep_table_index (void)
+{
+ int ep;
+
+ for (ep = 0; ep <= USB_FUNCTION_MAX_EP_NO; ++ep)
+ {
+ g_usb0_function_EPTableIndex[ep] = USB_FUNCTION_EP_ERROR;
+ }
+}
+#endif
+
+/* End of File */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/USBDevice/TARGET_RENESAS/TARGET_VK_RZ_A1H/usb0/src/userdef/usb0_function_dmacdrv.c Fri Apr 29 01:16:25 2016 +0100
@@ -0,0 +1,698 @@
+/*******************************************************************************
+* DISCLAIMER
+* This software is supplied by Renesas Electronics Corporation and is only
+* intended for use with Renesas products. No other uses are authorized. This
+* software is owned by Renesas Electronics Corporation and is protected under
+* all applicable laws, including copyright laws.
+* THIS SOFTWARE IS PROVIDED "AS IS" AND RENESAS MAKES NO WARRANTIES REGARDING
+* THIS SOFTWARE, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING BUT NOT
+* LIMITED TO WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE
+* AND NON-INFRINGEMENT. ALL SUCH WARRANTIES ARE EXPRESSLY DISCLAIMED.
+* TO THE MAXIMUM EXTENT PERMITTED NOT PROHIBITED BY LAW, NEITHER RENESAS
+* ELECTRONICS CORPORATION NOR ANY OF ITS AFFILIATED COMPANIES SHALL BE LIABLE
+* FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR
+* ANY REASON RELATED TO THIS SOFTWARE, EVEN IF RENESAS OR ITS AFFILIATES HAVE
+* BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
+* Renesas reserves the right, without notice, to make changes to this software
+* and to discontinue the availability of this software. By using this software,
+* you agree to the additional terms and conditions found by accessing the
+* following link:
+* http://www.renesas.com/disclaimer
+* Copyright (C) 2012 - 2014 Renesas Electronics Corporation. All rights reserved.
+*******************************************************************************/
+/*******************************************************************************
+* File Name : usb0_function_dmacdrv.c
+* $Rev: 1116 $
+* $Date:: 2014-07-09 16:29:19 +0900#$
+* Device(s) : RZ/A1H
+* Tool-Chain :
+* OS : None
+* H/W Platform :
+* Description : RZ/A1H R7S72100 USB Sample Program
+* Operation :
+* Limitations :
+*******************************************************************************/
+
+
+/*******************************************************************************
+Includes <System Includes> , "Project Includes"
+*******************************************************************************/
+#include <stdio.h>
+#include "r_typedefs.h"
+#include "iodefine.h"
+#include "rza_io_regrw.h"
+#include "usb0_function_dmacdrv.h"
+
+
+/*******************************************************************************
+Typedef definitions
+*******************************************************************************/
+
+
+/*******************************************************************************
+Macro definitions
+*******************************************************************************/
+#define DMAC_INDEFINE (255) /* Macro definition when REQD bit is not used */
+
+/* ==== Request setting information for on-chip peripheral module ==== */
+typedef enum dmac_peri_req_reg_type
+{
+ DMAC_REQ_MID,
+ DMAC_REQ_RID,
+ DMAC_REQ_AM,
+ DMAC_REQ_LVL,
+ DMAC_REQ_REQD
+} dmac_peri_req_reg_type_t;
+
+
+/*******************************************************************************
+Imported global variables and functions (from other files)
+*******************************************************************************/
+
+
+/*******************************************************************************
+Exported global variables and functions (to be accessed by other files)
+*******************************************************************************/
+
+
+/*******************************************************************************
+Private global variables and functions
+*******************************************************************************/
+/* ==== Prototype declaration ==== */
+
+/* ==== Global variable ==== */
+/* On-chip peripheral module request setting table */
+static const uint8_t usb0_function_dmac_peri_req_init_table[8][5] =
+{
+ /* MID,RID,AM,LVL,REQD */
+ {32, 3, 2, 1, 1}, /* USB_0 channel 0 transmit FIFO empty */
+ {32, 3, 2, 1, 0}, /* USB_0 channel 0 receive FIFO full */
+ {33, 3, 2, 1, 1}, /* USB_0 channel 1 transmit FIFO empty */
+ {33, 3, 2, 1, 0}, /* USB_0 channel 1 receive FIFO full */
+ {34, 3, 2, 1, 1}, /* USB_1 channel 0 transmit FIFO empty */
+ {34, 3, 2, 1, 0}, /* USB_1 channel 0 receive FIFO full */
+ {35, 3, 2, 1, 1}, /* USB_1 channel 1 transmit FIFO empty */
+ {35, 3, 2, 1, 0}, /* USB_1 channel 1 receive FIFO full */
+};
+
+
+/*******************************************************************************
+* Function Name: usb0_function_DMAC1_PeriReqInit
+* Description : Sets the register mode for DMA mode and the on-chip peripheral
+* : module request for transfer request for DMAC channel 1.
+* : Executes DMAC initial setting using the DMA information
+* : specified by the argument *trans_info and the enabled/disabled
+* : continuous transfer specified by the argument continuation.
+* : Registers DMAC channel 1 interrupt handler function and sets
+* : the interrupt priority level. Then enables transfer completion
+* : interrupt.
+* Arguments : dmac_transinfo_t *trans_info : Setting information to DMAC register
+* : uint32_t dmamode : DMA mode (only for DMAC_MODE_REGISTER)
+* : uint32_t continuation : Set continuous transfer to be valid
+* : after DMA transfer has been completed
+* : DMAC_SAMPLE_CONTINUATION : Execute continuous transfer
+* : DMAC_SAMPLE_SINGLE : Do not execute continuous transfer
+* : uint32_t request_factor : Factor for on-chip peripheral module request
+* : DMAC_REQ_OSTM0TINT : OSTM_0 compare match
+* : DMAC_REQ_OSTM1TINT : OSTM_1 compare match
+* : DMAC_REQ_TGI0A : MTU2_0 input capture/compare match
+* : :
+* : uint32_t req_direction: Setting value of CHCFG_n register REQD bit
+* Return Value : none
+*******************************************************************************/
+void usb0_function_DMAC1_PeriReqInit (const dmac_transinfo_t * trans_info,
+ uint32_t dmamode, uint32_t continuation,
+ uint32_t request_factor, uint32_t req_direction)
+{
+ /* ==== Register mode ==== */
+ if (DMAC_MODE_REGISTER == dmamode)
+ {
+ /* ==== Next0 register set ==== */
+ DMAC1.N0SA_n = trans_info->src_addr; /* Start address of transfer source */
+ DMAC1.N0DA_n = trans_info->dst_addr; /* Start address of transfer destination */
+ DMAC1.N0TB_n = trans_info->count; /* Total transfer byte count */
+
+ /* DAD : Transfer destination address counting direction */
+ /* SAD : Transfer source address counting direction */
+ /* DDS : Transfer destination transfer size */
+ /* SDS : Transfer source transfer size */
+ RZA_IO_RegWrite_32(&DMAC1.CHCFG_n,
+ trans_info->daddr_dir,
+ DMAC1_CHCFG_n_DAD_SHIFT,
+ DMAC1_CHCFG_n_DAD);
+ RZA_IO_RegWrite_32(&DMAC1.CHCFG_n,
+ trans_info->saddr_dir,
+ DMAC1_CHCFG_n_SAD_SHIFT,
+ DMAC1_CHCFG_n_SAD);
+ RZA_IO_RegWrite_32(&DMAC1.CHCFG_n,
+ trans_info->dst_size,
+ DMAC1_CHCFG_n_DDS_SHIFT,
+ DMAC1_CHCFG_n_DDS);
+ RZA_IO_RegWrite_32(&DMAC1.CHCFG_n,
+ trans_info->src_size,
+ DMAC1_CHCFG_n_SDS_SHIFT,
+ DMAC1_CHCFG_n_SDS);
+
+ /* DMS : Register mode */
+ /* RSEL : Select Next0 register set */
+ /* SBE : No discharge of buffer data when aborted */
+ /* DEM : No DMA interrupt mask */
+ RZA_IO_RegWrite_32(&DMAC1.CHCFG_n,
+ 0,
+ DMAC1_CHCFG_n_DMS_SHIFT,
+ DMAC1_CHCFG_n_DMS);
+ RZA_IO_RegWrite_32(&DMAC1.CHCFG_n,
+ 0,
+ DMAC1_CHCFG_n_RSEL_SHIFT,
+ DMAC1_CHCFG_n_RSEL);
+ RZA_IO_RegWrite_32(&DMAC1.CHCFG_n,
+ 0,
+ DMAC1_CHCFG_n_SBE_SHIFT,
+ DMAC1_CHCFG_n_SBE);
+ RZA_IO_RegWrite_32(&DMAC1.CHCFG_n,
+ 0,
+ DMAC1_CHCFG_n_DEM_SHIFT,
+ DMAC1_CHCFG_n_DEM);
+
+ /* ---- Continuous transfer ---- */
+ if (DMAC_SAMPLE_CONTINUATION == continuation)
+ {
+ /* REN : Execute continuous transfer */
+ /* RSW : Change register set when DMA transfer is completed. */
+ RZA_IO_RegWrite_32(&DMAC1.CHCFG_n,
+ 1,
+ DMAC1_CHCFG_n_REN_SHIFT,
+ DMAC1_CHCFG_n_REN);
+ RZA_IO_RegWrite_32(&DMAC1.CHCFG_n,
+ 1,
+ DMAC1_CHCFG_n_RSW_SHIFT,
+ DMAC1_CHCFG_n_RSW);
+ }
+ /* ---- Single transfer ---- */
+ else
+ {
+ /* REN : Do not execute continuous transfer */
+ /* RSW : Do not change register set when DMA transfer is completed. */
+ RZA_IO_RegWrite_32(&DMAC1.CHCFG_n,
+ 0,
+ DMAC1_CHCFG_n_REN_SHIFT,
+ DMAC1_CHCFG_n_REN);
+ RZA_IO_RegWrite_32(&DMAC1.CHCFG_n,
+ 0,
+ DMAC1_CHCFG_n_RSW_SHIFT,
+ DMAC1_CHCFG_n_RSW);
+ }
+
+ /* TM : Single transfer */
+ /* SEL : Channel setting */
+ /* HIEN, LOEN : On-chip peripheral module request */
+ RZA_IO_RegWrite_32(&DMAC1.CHCFG_n,
+ 0,
+ DMAC1_CHCFG_n_TM_SHIFT,
+ DMAC1_CHCFG_n_TM);
+ RZA_IO_RegWrite_32(&DMAC1.CHCFG_n,
+ 1,
+ DMAC1_CHCFG_n_SEL_SHIFT,
+ DMAC1_CHCFG_n_SEL);
+ RZA_IO_RegWrite_32(&DMAC1.CHCFG_n,
+ 1,
+ DMAC1_CHCFG_n_HIEN_SHIFT,
+ DMAC1_CHCFG_n_HIEN);
+ RZA_IO_RegWrite_32(&DMAC1.CHCFG_n,
+ 0,
+ DMAC1_CHCFG_n_LOEN_SHIFT,
+ DMAC1_CHCFG_n_LOEN);
+
+ /* ---- Set factor by specified on-chip peripheral module request ---- */
+ RZA_IO_RegWrite_32(&DMAC1.CHCFG_n,
+ usb0_function_dmac_peri_req_init_table[request_factor][DMAC_REQ_AM],
+ DMAC1_CHCFG_n_AM_SHIFT,
+ DMAC1_CHCFG_n_AM);
+ RZA_IO_RegWrite_32(&DMAC1.CHCFG_n,
+ usb0_function_dmac_peri_req_init_table[request_factor][DMAC_REQ_LVL],
+ DMAC1_CHCFG_n_LVL_SHIFT,
+ DMAC1_CHCFG_n_LVL);
+
+ if (usb0_function_dmac_peri_req_init_table[request_factor][DMAC_REQ_REQD] != DMAC_INDEFINE)
+ {
+ RZA_IO_RegWrite_32(&DMAC1.CHCFG_n,
+ usb0_function_dmac_peri_req_init_table[request_factor][DMAC_REQ_REQD],
+ DMAC1_CHCFG_n_REQD_SHIFT,
+ DMAC1_CHCFG_n_REQD);
+ }
+ else
+ {
+ RZA_IO_RegWrite_32(&DMAC1.CHCFG_n,
+ req_direction,
+ DMAC1_CHCFG_n_REQD_SHIFT,
+ DMAC1_CHCFG_n_REQD);
+ }
+
+ RZA_IO_RegWrite_32(&DMAC01.DMARS,
+ usb0_function_dmac_peri_req_init_table[request_factor][DMAC_REQ_RID],
+ DMAC01_DMARS_CH1_RID_SHIFT,
+ DMAC01_DMARS_CH1_RID);
+ RZA_IO_RegWrite_32(&DMAC01.DMARS,
+ usb0_function_dmac_peri_req_init_table[request_factor][DMAC_REQ_MID],
+ DMAC01_DMARS_CH1_MID_SHIFT,
+ DMAC01_DMARS_CH1_MID);
+
+ /* PR : Round robin mode */
+ RZA_IO_RegWrite_32(&DMAC07.DCTRL_0_7,
+ 1,
+ DMAC07_DCTRL_0_7_PR_SHIFT,
+ DMAC07_DCTRL_0_7_PR);
+ }
+}
+
+/*******************************************************************************
+* Function Name: usb0_function_DMAC1_Open
+* Description : Enables DMAC channel 1 transfer.
+* Arguments : uint32_t req : DMAC request mode
+* Return Value : 0 : Succeeded in enabling DMA transfer
+* : -1 : Failed to enable DMA transfer (due to DMA operation)
+*******************************************************************************/
+int32_t usb0_function_DMAC1_Open (uint32_t req)
+{
+ int32_t ret;
+ volatile uint8_t dummy;
+
+ /* Transferable? */
+ if ((0 == RZA_IO_RegRead_32(&DMAC1.CHSTAT_n,
+ DMAC1_CHSTAT_n_EN_SHIFT,
+ DMAC1_CHSTAT_n_EN)) &&
+ (0 == RZA_IO_RegRead_32(&DMAC1.CHSTAT_n,
+ DMAC1_CHSTAT_n_TACT_SHIFT,
+ DMAC1_CHSTAT_n_TACT)))
+ {
+ /* Clear Channel Status Register */
+ RZA_IO_RegWrite_32(&DMAC1.CHCTRL_n,
+ 1,
+ DMAC1_CHCTRL_n_SWRST_SHIFT,
+ DMAC1_CHCTRL_n_SWRST);
+ dummy = RZA_IO_RegRead_32(&DMAC1.CHCTRL_n,
+ DMAC1_CHCTRL_n_SWRST_SHIFT,
+ DMAC1_CHCTRL_n_SWRST);
+ /* Enable DMA transfer */
+ RZA_IO_RegWrite_32(&DMAC1.CHCTRL_n,
+ 1,
+ DMAC1_CHCTRL_n_SETEN_SHIFT,
+ DMAC1_CHCTRL_n_SETEN);
+
+ /* ---- Request by software ---- */
+ if (DMAC_REQ_MODE_SOFT == req)
+ {
+ /* DMA transfer Request by software */
+ RZA_IO_RegWrite_32(&DMAC1.CHCTRL_n,
+ 1,
+ DMAC1_CHCTRL_n_STG_SHIFT,
+ DMAC1_CHCTRL_n_STG);
+ }
+
+ ret = 0;
+ }
+ else
+ {
+ ret = -1;
+ }
+
+ return ret;
+}
+
+/*******************************************************************************
+* Function Name: usb0_function_DMAC1_Close
+* Description : Aborts DMAC channel 1 transfer. Returns the remaining transfer
+* : byte count at the time of DMA transfer abort to the argument
+* : *remain.
+* Arguments : uint32_t * remain : Remaining transfer byte count when
+* : : DMA transfer is aborted
+* Return Value : none
+*******************************************************************************/
+void usb0_function_DMAC1_Close (uint32_t * remain)
+{
+
+ /* ==== Abort transfer ==== */
+ RZA_IO_RegWrite_32(&DMAC1.CHCTRL_n,
+ 1,
+ DMAC1_CHCTRL_n_CLREN_SHIFT,
+ DMAC1_CHCTRL_n_CLREN);
+
+ while (1 == RZA_IO_RegRead_32(&DMAC1.CHSTAT_n,
+ DMAC1_CHSTAT_n_TACT_SHIFT,
+ DMAC1_CHSTAT_n_TACT))
+ {
+ /* Loop until transfer is aborted */
+ }
+
+ while (1 == RZA_IO_RegRead_32(&DMAC1.CHSTAT_n,
+ DMAC1_CHSTAT_n_EN_SHIFT,
+ DMAC1_CHSTAT_n_EN))
+ {
+ /* Loop until 0 is set in EN before checking the remaining transfer byte count */
+ }
+ /* ==== Obtain remaining transfer byte count ==== */
+ *remain = DMAC1.CRTB_n;
+}
+
+/*******************************************************************************
+* Function Name: usb0_function_DMAC1_Load_Set
+* Description : Sets the transfer source address, transfer destination
+* : address, and total transfer byte count respectively
+* : specified by the argument src_addr, dst_addr, and count to
+* : DMAC channel 1 as DMA transfer information.
+* : Sets the register set selected by the CHCFG_n register
+* : RSEL bit from the Next0 or Next1 register set.
+* : This function should be called when DMA transfer of DMAC
+* : channel 1 is aboted.
+* Arguments : uint32_t src_addr : Transfer source address
+* : uint32_t dst_addr : Transfer destination address
+* : uint32_t count : Total transfer byte count
+* Return Value : none
+*******************************************************************************/
+void usb0_function_DMAC1_Load_Set (uint32_t src_addr, uint32_t dst_addr, uint32_t count)
+{
+ uint8_t reg_set;
+
+ /* Obtain register set in use */
+ reg_set = RZA_IO_RegRead_32(&DMAC1.CHSTAT_n,
+ DMAC1_CHSTAT_n_SR_SHIFT,
+ DMAC1_CHSTAT_n_SR);
+
+ /* ==== Load ==== */
+ if (0 == reg_set)
+ {
+ /* ---- Next0 Register Set ---- */
+ DMAC1.N0SA_n = src_addr; /* Start address of transfer source */
+ DMAC1.N0DA_n = dst_addr; /* Start address of transfer destination */
+ DMAC1.N0TB_n = count; /* Total transfer byte count */
+ }
+ else
+ {
+ /* ---- Next1 Register Set ---- */
+ DMAC1.N1SA_n = src_addr; /* Start address of transfer source */
+ DMAC1.N1DA_n = dst_addr; /* Start address of transfer destination */
+ DMAC1.N1TB_n = count; /* Total transfer byte count */
+ }
+}
+
+/*******************************************************************************
+* Function Name: usb0_function_DMAC2_PeriReqInit
+* Description : Sets the register mode for DMA mode and the on-chip peripheral
+* : module request for transfer request for DMAC channel 2.
+* : Executes DMAC initial setting using the DMA information
+* : specified by the argument *trans_info and the enabled/disabled
+* : continuous transfer specified by the argument continuation.
+* : Registers DMAC channel 2 interrupt handler function and sets
+* : the interrupt priority level. Then enables transfer completion
+* : interrupt.
+* Arguments : dmac_transinfo_t * trans_info : Setting information to DMAC
+* : : register
+* : uint32_t dmamode : DMA mode (only for DMAC_MODE_REGISTER)
+* : uint32_t continuation : Set continuous transfer to be valid
+* : : after DMA transfer has been completed
+* : DMAC_SAMPLE_CONTINUATION : Execute continuous transfer
+* : DMAC_SAMPLE_SINGLE : Do not execute continuous
+* : : transfer
+* : uint32_t request_factor : Factor for on-chip peripheral module
+* : : request
+* : DMAC_REQ_OSTM0TINT : OSTM_0 compare match
+* : DMAC_REQ_OSTM1TINT : OSTM_1 compare match
+* : DMAC_REQ_TGI0A : MTU2_0 input capture/compare match
+* : :
+* : uint32_t req_direction : Setting value of CHCFG_n register
+* : : REQD bit
+*******************************************************************************/
+void usb0_function_DMAC2_PeriReqInit (const dmac_transinfo_t * trans_info,
+ uint32_t dmamode, uint32_t continuation,
+ uint32_t request_factor, uint32_t req_direction)
+{
+ /* ==== Register mode ==== */
+ if (DMAC_MODE_REGISTER == dmamode)
+ {
+ /* ==== Next0 register set ==== */
+ DMAC2.N0SA_n = trans_info->src_addr; /* Start address of transfer source */
+ DMAC2.N0DA_n = trans_info->dst_addr; /* Start address of transfer destination */
+ DMAC2.N0TB_n = trans_info->count; /* Total transfer byte count */
+
+ /* DAD : Transfer destination address counting direction */
+ /* SAD : Transfer source address counting direction */
+ /* DDS : Transfer destination transfer size */
+ /* SDS : Transfer source transfer size */
+ RZA_IO_RegWrite_32(&DMAC2.CHCFG_n,
+ trans_info->daddr_dir,
+ DMAC2_CHCFG_n_DAD_SHIFT,
+ DMAC2_CHCFG_n_DAD);
+ RZA_IO_RegWrite_32(&DMAC2.CHCFG_n,
+ trans_info->saddr_dir,
+ DMAC2_CHCFG_n_SAD_SHIFT,
+ DMAC2_CHCFG_n_SAD);
+ RZA_IO_RegWrite_32(&DMAC2.CHCFG_n,
+ trans_info->dst_size,
+ DMAC2_CHCFG_n_DDS_SHIFT,
+ DMAC2_CHCFG_n_DDS);
+ RZA_IO_RegWrite_32(&DMAC2.CHCFG_n,
+ trans_info->src_size,
+ DMAC2_CHCFG_n_SDS_SHIFT,
+ DMAC2_CHCFG_n_SDS);
+
+ /* DMS : Register mode */
+ /* RSEL : Select Next0 register set */
+ /* SBE : No discharge of buffer data when aborted */
+ /* DEM : No DMA interrupt mask */
+ RZA_IO_RegWrite_32(&DMAC2.CHCFG_n,
+ 0,
+ DMAC2_CHCFG_n_DMS_SHIFT,
+ DMAC2_CHCFG_n_DMS);
+ RZA_IO_RegWrite_32(&DMAC2.CHCFG_n,
+ 0,
+ DMAC2_CHCFG_n_RSEL_SHIFT,
+ DMAC2_CHCFG_n_RSEL);
+ RZA_IO_RegWrite_32(&DMAC2.CHCFG_n,
+ 0,
+ DMAC2_CHCFG_n_SBE_SHIFT,
+ DMAC2_CHCFG_n_SBE);
+ RZA_IO_RegWrite_32(&DMAC2.CHCFG_n,
+ 0,
+ DMAC2_CHCFG_n_DEM_SHIFT,
+ DMAC2_CHCFG_n_DEM);
+
+ /* ---- Continuous transfer ---- */
+ if (DMAC_SAMPLE_CONTINUATION == continuation)
+ {
+ /* REN : Execute continuous transfer */
+ /* RSW : Change register set when DMA transfer is completed. */
+ RZA_IO_RegWrite_32(&DMAC2.CHCFG_n,
+ 1,
+ DMAC2_CHCFG_n_REN_SHIFT,
+ DMAC2_CHCFG_n_REN);
+ RZA_IO_RegWrite_32(&DMAC2.CHCFG_n,
+ 1,
+ DMAC2_CHCFG_n_RSW_SHIFT,
+ DMAC2_CHCFG_n_RSW);
+ }
+ /* ---- Single transfer ---- */
+ else
+ {
+ /* REN : Do not execute continuous transfer */
+ /* RSW : Do not change register set when DMA transfer is completed. */
+ RZA_IO_RegWrite_32(&DMAC2.CHCFG_n,
+ 0,
+ DMAC2_CHCFG_n_REN_SHIFT,
+ DMAC2_CHCFG_n_REN);
+ RZA_IO_RegWrite_32(&DMAC2.CHCFG_n,
+ 0,
+ DMAC2_CHCFG_n_RSW_SHIFT,
+ DMAC2_CHCFG_n_RSW);
+ }
+
+ /* TM : Single transfer */
+ /* SEL : Channel setting */
+ /* HIEN, LOEN : On-chip peripheral module request */
+ RZA_IO_RegWrite_32(&DMAC2.CHCFG_n,
+ 0,
+ DMAC2_CHCFG_n_TM_SHIFT,
+ DMAC2_CHCFG_n_TM);
+ RZA_IO_RegWrite_32(&DMAC2.CHCFG_n,
+ 2,
+ DMAC2_CHCFG_n_SEL_SHIFT,
+ DMAC2_CHCFG_n_SEL);
+ RZA_IO_RegWrite_32(&DMAC2.CHCFG_n,
+ 1,
+ DMAC2_CHCFG_n_HIEN_SHIFT,
+ DMAC2_CHCFG_n_HIEN);
+ RZA_IO_RegWrite_32(&DMAC2.CHCFG_n,
+ 0,
+ DMAC2_CHCFG_n_LOEN_SHIFT,
+ DMAC2_CHCFG_n_LOEN);
+
+ /* ---- Set factor by specified on-chip peripheral module request ---- */
+ RZA_IO_RegWrite_32(&DMAC2.CHCFG_n,
+ usb0_function_dmac_peri_req_init_table[request_factor][DMAC_REQ_AM],
+ DMAC2_CHCFG_n_AM_SHIFT,
+ DMAC2_CHCFG_n_AM);
+ RZA_IO_RegWrite_32(&DMAC2.CHCFG_n,
+ usb0_function_dmac_peri_req_init_table[request_factor][DMAC_REQ_LVL],
+ DMAC2_CHCFG_n_LVL_SHIFT,
+ DMAC2_CHCFG_n_LVL);
+ if (usb0_function_dmac_peri_req_init_table[request_factor][DMAC_REQ_REQD] != DMAC_INDEFINE)
+ {
+ RZA_IO_RegWrite_32(&DMAC2.CHCFG_n,
+ usb0_function_dmac_peri_req_init_table[request_factor][DMAC_REQ_REQD],
+ DMAC2_CHCFG_n_REQD_SHIFT,
+ DMAC2_CHCFG_n_REQD);
+ }
+ else
+ {
+ RZA_IO_RegWrite_32(&DMAC2.CHCFG_n,
+ req_direction,
+ DMAC2_CHCFG_n_REQD_SHIFT,
+ DMAC2_CHCFG_n_REQD);
+ }
+ RZA_IO_RegWrite_32(&DMAC23.DMARS,
+ usb0_function_dmac_peri_req_init_table[request_factor][DMAC_REQ_RID],
+ DMAC23_DMARS_CH2_RID_SHIFT,
+ DMAC23_DMARS_CH2_RID);
+ RZA_IO_RegWrite_32(&DMAC23.DMARS,
+ usb0_function_dmac_peri_req_init_table[request_factor][DMAC_REQ_MID],
+ DMAC23_DMARS_CH2_MID_SHIFT,
+ DMAC23_DMARS_CH2_MID);
+
+ /* PR : Round robin mode */
+ RZA_IO_RegWrite_32(&DMAC07.DCTRL_0_7,
+ 1,
+ DMAC07_DCTRL_0_7_PR_SHIFT,
+ DMAC07_DCTRL_0_7_PR);
+ }
+}
+
+/*******************************************************************************
+* Function Name: usb0_function_DMAC2_Open
+* Description : Enables DMAC channel 2 transfer.
+* Arguments : uint32_t req : DMAC request mode
+* Return Value : 0 : Succeeded in enabling DMA transfer
+* : -1 : Failed to enable DMA transfer (due to DMA operation)
+*******************************************************************************/
+int32_t usb0_function_DMAC2_Open (uint32_t req)
+{
+ int32_t ret;
+ volatile uint8_t dummy;
+
+ /* Transferable? */
+ if ((0 == RZA_IO_RegRead_32(&DMAC.CHSTAT_2,
+ DMAC2_CHSTAT_n_EN_SHIFT,
+ DMAC2_CHSTAT_n_EN)) &&
+ (0 == RZA_IO_RegRead_32(&DMAC.CHSTAT_2,
+ DMAC2_CHSTAT_n_TACT_SHIFT,
+ DMAC2_CHSTAT_n_TACT)))
+ {
+ /* Clear Channel Status Register */
+ RZA_IO_RegWrite_32(&DMAC2.CHCTRL_n,
+ 1,
+ DMAC2_CHCTRL_n_SWRST_SHIFT,
+ DMAC2_CHCTRL_n_SWRST);
+ dummy = RZA_IO_RegRead_32(&DMAC2.CHCTRL_n,
+ DMAC2_CHCTRL_n_SWRST_SHIFT,
+ DMAC2_CHCTRL_n_SWRST);
+ /* Enable DMA transfer */
+ RZA_IO_RegWrite_32(&DMAC2.CHCTRL_n,
+ 1,
+ DMAC2_CHCTRL_n_SETEN_SHIFT,
+ DMAC2_CHCTRL_n_SETEN);
+
+ /* ---- Request by software ---- */
+ if (DMAC_REQ_MODE_SOFT == req)
+ {
+ /* DMA transfer Request by software */
+ RZA_IO_RegWrite_32(&DMAC2.CHCTRL_n,
+ 1,
+ DMAC2_CHCTRL_n_STG_SHIFT,
+ DMAC2_CHCTRL_n_STG);
+ }
+
+ ret = 0;
+ }
+ else
+ {
+ ret = -1;
+ }
+
+ return ret;
+}
+
+/*******************************************************************************
+* Function Name: usb0_function_DMAC2_Close
+* Description : Aborts DMAC channel 2 transfer. Returns the remaining transfer
+* : byte count at the time of DMA transfer abort to the argument
+* : *remain.
+* Arguments : uint32_t * remain : Remaining transfer byte count when
+* : : DMA transfer is aborted
+* Return Value : none
+*******************************************************************************/
+void usb0_function_DMAC2_Close (uint32_t * remain)
+{
+
+ /* ==== Abort transfer ==== */
+ RZA_IO_RegWrite_32(&DMAC2.CHCTRL_n,
+ 1,
+ DMAC2_CHCTRL_n_CLREN_SHIFT,
+ DMAC2_CHCTRL_n_CLREN);
+
+ while (1 == RZA_IO_RegRead_32(&DMAC2.CHSTAT_n,
+ DMAC2_CHSTAT_n_TACT_SHIFT,
+ DMAC2_CHSTAT_n_TACT))
+ {
+ /* Loop until transfer is aborted */
+ }
+
+ while (1 == RZA_IO_RegRead_32(&DMAC2.CHSTAT_n,
+ DMAC2_CHSTAT_n_EN_SHIFT,
+ DMAC2_CHSTAT_n_EN))
+ {
+ /* Loop until 0 is set in EN before checking the remaining transfer byte count */
+ }
+ /* ==== Obtain remaining transfer byte count ==== */
+ *remain = DMAC2.CRTB_n;
+}
+
+/*******************************************************************************
+* Function Name: usb0_function_DMAC2_Load_Set
+* Description : Sets the transfer source address, transfer destination
+* : address, and total transfer byte count respectively
+* : specified by the argument src_addr, dst_addr, and count to
+* : DMAC channel 2 as DMA transfer information.
+* : Sets the register set selected by the CHCFG_n register
+* : RSEL bit from the Next0 or Next1 register set.
+* : This function should be called when DMA transfer of DMAC
+* : channel 2 is aboted.
+* Arguments : uint32_t src_addr : Transfer source address
+* : uint32_t dst_addr : Transfer destination address
+* : uint32_t count : Total transfer byte count
+* Return Value : none
+*******************************************************************************/
+void usb0_function_DMAC2_Load_Set (uint32_t src_addr, uint32_t dst_addr, uint32_t count)
+{
+ uint8_t reg_set;
+
+ /* Obtain register set in use */
+ reg_set = RZA_IO_RegRead_32(&DMAC2.CHSTAT_n,
+ DMAC2_CHSTAT_n_SR_SHIFT,
+ DMAC2_CHSTAT_n_SR);
+
+ /* ==== Load ==== */
+ if (0 == reg_set)
+ {
+ /* ---- Next0 Register Set ---- */
+ DMAC2.N0SA_n = src_addr; /* Start address of transfer source */
+ DMAC2.N0DA_n = dst_addr; /* Start address of transfer destination */
+ DMAC2.N0TB_n = count; /* Total transfer byte count */
+ }
+ else
+ {
+ /* ---- Next1 Register Set ---- */
+ DMAC2.N1SA_n = src_addr; /* Start address of transfer source */
+ DMAC2.N1DA_n = dst_addr; /* Start address of transfer destination */
+ DMAC2.N1TB_n = count; /* Total transfer byte count */
+ }
+}
+
+/* End of File */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/USBDevice/TARGET_RENESAS/TARGET_VK_RZ_A1H/usb0/src/userdef/usb0_function_userdef.c Fri Apr 29 01:16:25 2016 +0100
@@ -0,0 +1,762 @@
+/*******************************************************************************
+* DISCLAIMER
+* This software is supplied by Renesas Electronics Corporation and is only
+* intended for use with Renesas products. No other uses are authorized. This
+* software is owned by Renesas Electronics Corporation and is protected under
+* all applicable laws, including copyright laws.
+* THIS SOFTWARE IS PROVIDED "AS IS" AND RENESAS MAKES NO WARRANTIES REGARDING
+* THIS SOFTWARE, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING BUT NOT
+* LIMITED TO WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE
+* AND NON-INFRINGEMENT. ALL SUCH WARRANTIES ARE EXPRESSLY DISCLAIMED.
+* TO THE MAXIMUM EXTENT PERMITTED NOT PROHIBITED BY LAW, NEITHER RENESAS
+* ELECTRONICS CORPORATION NOR ANY OF ITS AFFILIATED COMPANIES SHALL BE LIABLE
+* FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR
+* ANY REASON RELATED TO THIS SOFTWARE, EVEN IF RENESAS OR ITS AFFILIATES HAVE
+* BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
+* Renesas reserves the right, without notice, to make changes to this software
+* and to discontinue the availability of this software. By using this software,
+* you agree to the additional terms and conditions found by accessing the
+* following link:
+* http://www.renesas.com/disclaimer
+* Copyright (C) 2012 - 2014 Renesas Electronics Corporation. All rights reserved.
+*******************************************************************************/
+/*******************************************************************************
+* File Name : usb0_function_userdef.c
+* $Rev: 1116 $
+* $Date:: 2014-07-09 16:29:19 +0900#$
+* Device(s) : RZ/A1H
+* Tool-Chain :
+* OS : None
+* H/W Platform :
+* Description : RZ/A1H R7S72100 USB Sample Program
+* Operation :
+* Limitations :
+*******************************************************************************/
+
+
+/*******************************************************************************
+Includes <System Includes> , "Project Includes"
+*******************************************************************************/
+#include <stdio.h>
+#include "r_typedefs.h"
+#include "iodefine.h"
+#include "devdrv_usb_function_api.h"
+#include "usb0_function_dmacdrv.h" /* common DMAC driver for USB */
+
+
+/*******************************************************************************
+Typedef definitions
+*******************************************************************************/
+
+
+/*******************************************************************************
+Macro definitions
+*******************************************************************************/
+#define DUMMY_ACCESS OSTM0CNT
+
+/* #define CACHE_WRITEBACK */
+
+
+/*******************************************************************************
+Imported global variables and functions (from other files)
+*******************************************************************************/
+extern int32_t io_cwb(unsigned long start, unsigned long end);
+
+
+/*******************************************************************************
+Exported global variables and functions (to be accessed by other files)
+*******************************************************************************/
+static void usb0_function_enable_dmac0(uint32_t src, uint32_t dst, uint32_t count,
+ uint32_t size, uint32_t dir, uint32_t fifo, uint16_t dfacc);
+static void usb0_function_enable_dmac1(uint32_t src, uint32_t dst, uint32_t count,
+ uint32_t size, uint32_t dir, uint32_t fifo, uint16_t dfacc);
+static void Userdef_USB_usb0_function_delay_10us_2(void);
+
+
+/*******************************************************************************
+Private global variables and functions
+*******************************************************************************/
+
+
+/*******************************************************************************
+* Function Name: Userdef_USB_usb0_function_d0fifo_dmaintid
+* Description : get D0FIFO DMA Interrupt ID
+* Arguments : none
+* Return Value : D0FIFO DMA Interrupt ID
+*******************************************************************************/
+IRQn_Type Userdef_USB_usb0_function_d0fifo_dmaintid (void)
+{
+#if 0
+ return DMAINT1_IRQn;
+#else
+ return 0xFFFF;
+#endif
+}
+
+/*******************************************************************************
+* Function Name: Userdef_USB_usb0_function_d1fifo_dmaintid
+* Description : get D1FIFO DMA Interrupt ID
+* Arguments : none
+* Return Value : D1FIFO DMA Interrupt ID
+*******************************************************************************/
+IRQn_Type Userdef_USB_usb0_function_d1fifo_dmaintid (void)
+{
+#if 0
+ return DMAINT1_IRQn;
+#else
+ return 0xFFFF;
+#endif
+}
+
+/*******************************************************************************
+* Function Name: Userdef_USB_usb0_function_attach
+* Description : Wait for the software of 1ms.
+* : Alter this function according to the user's system.
+* Arguments : none
+* Return Value : none
+*******************************************************************************/
+void Userdef_USB_usb0_function_attach (void)
+{
+ printf("\n");
+ printf("channel 0 attach device\n");
+ printf("\n");
+}
+
+/*******************************************************************************
+* Function Name: Userdef_USB_usb0_function_detach
+* Description : Wait for the software of 1ms.
+* : Alter this function according to the user's system.
+* Arguments : none
+* Return Value : none
+*******************************************************************************/
+void Userdef_USB_usb0_function_detach (void)
+{
+ printf("\n");
+ printf("channel 0 detach device\n");
+ printf("\n");
+}
+
+/*******************************************************************************
+* Function Name: Userdef_USB_usb0_function_delay_1ms
+* Description : Wait for the software of 1ms.
+* : Alter this function according to the user's system.
+* Arguments : none
+* Return Value : none
+*******************************************************************************/
+void Userdef_USB_usb0_function_delay_1ms (void)
+{
+ volatile int i;
+ volatile unsigned long tmp;
+
+ /*
+ * Wait 1ms (Please change for your MCU).
+ */
+ for (i = 0; i < 1440; ++i)
+ {
+ tmp = DUMMY_ACCESS;
+ }
+}
+
+/*******************************************************************************
+* Function Name: Userdef_USB_usb0_function_delay_xms
+* Description : Wait for the software in the period of time specified by the
+* : argument.
+* : Alter this function according to the user's system.
+* Arguments : uint32_t msec ; Wait Time (msec)
+* Return Value : none
+*******************************************************************************/
+void Userdef_USB_usb0_function_delay_xms (uint32_t msec)
+{
+ volatile unsigned short i;
+
+ for (i = 0; i < msec; ++i)
+ {
+ Userdef_USB_usb0_function_delay_1ms();
+ }
+}
+
+/*******************************************************************************
+* Function Name: Userdef_USB_usb0_function_delay_10us
+* Description : Waits for software for the period specified by the argument.
+* : Alter this function according to the user's system.
+* Arguments : uint32_t usec ; Wait Time(x 10usec)
+* Return Value : none
+*******************************************************************************/
+void Userdef_USB_usb0_function_delay_10us (uint32_t usec)
+{
+ volatile int i;
+
+ /* Wait 10us (Please change for your MCU) */
+ for (i = 0; i < usec; ++i)
+ {
+ Userdef_USB_usb0_function_delay_10us_2();
+ }
+}
+
+/*******************************************************************************
+* Function Name: Userdef_USB_usb0_function_delay_10us_2
+* Description : Waits for software for the period specified by the argument.
+* : Alter this function according to the user's system.
+* Arguments : none
+* Return Value : none
+*******************************************************************************/
+static void Userdef_USB_usb0_function_delay_10us_2 (void)
+{
+ volatile int i;
+ volatile unsigned long tmp;
+
+ /* Wait 1us (Please change for your MCU) */
+ for (i = 0; i < 14; ++i)
+ {
+ tmp = DUMMY_ACCESS;
+ }
+}
+
+/*******************************************************************************
+* Function Name: Userdef_USB_usb0_function_delay_500ns
+* Description : Wait for software for 500ns.
+* : Alter this function according to the user's system.
+* Arguments : none
+* Return Value : none
+*******************************************************************************/
+void Userdef_USB_usb0_function_delay_500ns (void)
+{
+ volatile int i;
+ volatile unsigned long tmp;
+
+ /* Wait 500ns (Please change for your MCU) */
+ /* Wait 500ns I clock 266MHz */
+ tmp = DUMMY_ACCESS;
+}
+
+/*******************************************************************************
+* Function Name: Userdef_USB_usb0_function_start_dma
+* Description : Enables DMA transfer on the information specified by the argument.
+* : Set DMAC register by this function to enable DMA transfer.
+* : After executing this function, USB module is set to start DMA
+* : transfer. DMA transfer should not wait for DMA transfer complete.
+* Arguments : USB_FUNCTION_DMA_t *dma : DMA parameter
+* : typedef struct{
+* : uint32_t fifo; FIFO for using
+* : uint32_t buffer; Start address of transfer source/destination
+* : uint32_t bytes; Transfer size(Byte)
+* : uint32_t dir; Transfer direction(0:Buffer->FIFO, 1:FIFO->Buffer)
+* : uint32_t size; DMA transfer size
+* : } USB_FUNCTION_DMA_t;
+* : uint16_t dfacc ; 0 : cycle steal mode
+* : 1 : 16byte continuous mode
+* : 2 : 32byte continuous mode
+* Return Value : none
+*******************************************************************************/
+void Userdef_USB_usb0_function_start_dma (USB_FUNCTION_DMA_t * dma, uint16_t dfacc)
+{
+ uint32_t trncount;
+ uint32_t src;
+ uint32_t dst;
+ uint32_t size;
+ uint32_t dir;
+#ifdef CACHE_WRITEBACK
+ uint32_t ptr;
+#endif
+
+ trncount = dma->bytes;
+ dir = dma->dir;
+
+ if (dir == USB_FUNCTION_FIFO2BUF)
+ {
+ /* DxFIFO determination */
+ dst = dma->buffer;
+#ifndef __USB_FUNCTION_DF_ACC_ENABLE__
+ if (dma->fifo == USB_FUNCTION_D0FIFO_DMA)
+ {
+ src = (uint32_t)(&USB200.D0FIFO.UINT32);
+ }
+ else
+ {
+ src = (uint32_t)(&USB200.D1FIFO.UINT32);
+ }
+ size = dma->size;
+
+ if (size == 0)
+ {
+ src += 3; /* byte access */
+ }
+ else if (size == 1)
+ {
+ src += 2; /* short access */
+ }
+ else
+ {
+ /* Do Nothing */
+ }
+#else
+ size = dma->size;
+
+ if (size == 2)
+ {
+ /* 32bit access */
+ if (dfacc == 2)
+ {
+ /* 32byte access */
+ if (dma->fifo == USB_FUNCTION_D0FIFO_DMA)
+ {
+ src = (uint32_t)(&USB200.D0FIFOB0);
+ }
+ else
+ {
+ src = (uint32_t)(&USB200.D1FIFOB0);
+ }
+ }
+ else if (dfacc == 1)
+ {
+ /* 16byte access */
+ if (dma->fifo == USB_FUNCTION_D0FIFO_DMA)
+ {
+ src = (uint32_t)(&USB200.D0FIFOB0);
+ }
+ else
+ {
+ src = (uint32_t)(&USB200.D1FIFOB0);
+ }
+ }
+ else
+ {
+ /* normal access */
+ if (dma->fifo == USB_FUNCTION_D0FIFO_DMA)
+ {
+ src = (uint32_t)(&USB200.D0FIFO.UINT32);
+ }
+ else
+ {
+ src = (uint32_t)(&USB200.D1FIFO.UINT32);
+ }
+ }
+ }
+ else if (size == 1)
+ {
+ /* 16bit access */
+ dfacc = 0; /* force normal access */
+
+ if (dma->fifo == USB_FUNCTION_D0FIFO_DMA)
+ {
+ src = (uint32_t)(&USB200.D0FIFO.UINT32);
+ }
+ else
+ {
+ src = (uint32_t)(&USB200.D1FIFO.UINT32);
+ }
+ src += 2; /* short access */
+ }
+ else
+ {
+ /* 8bit access */
+ dfacc = 0; /* force normal access */
+
+ if (dma->fifo == USB_FUNCTION_D0FIFO_DMA)
+ {
+ src = (uint32_t)(&USB200.D0FIFO.UINT32);
+ }
+ else
+ {
+ src = (uint32_t)(&USB200.D1FIFO.UINT32);
+ }
+ src += 3; /* byte access */
+ }
+#endif
+ }
+ else
+ {
+ /* DxFIFO determination */
+ src = dma->buffer;
+#ifndef __USB_FUNCTION_DF_ACC_ENABLE__
+ if (dma->fifo == USB_FUNCTION_D0FIFO_DMA)
+ {
+ dst = (uint32_t)(&USB200.D0FIFO.UINT32);
+ }
+ else
+ {
+ dst = (uint32_t)(&USB200.D1FIFO.UINT32);
+ }
+ size = dma->size;
+
+ if (size == 0)
+ {
+ dst += 3; /* byte access */
+ }
+ else if (size == 1)
+ {
+ dst += 2; /* short access */
+ }
+ else
+ {
+ /* Do Nothing */
+ }
+#else
+ size = dma->size;
+
+ if (size == 2)
+ {
+ /* 32bit access */
+ if (dfacc == 2)
+ {
+ /* 32byte access */
+ if (dma->fifo == USB_FUNCTION_D0FIFO_DMA)
+ {
+ dst = (uint32_t)(&USB200.D0FIFOB0);
+ }
+ else
+ {
+ dst = (uint32_t)(&USB200.D1FIFOB0);
+ }
+ }
+ else if (dfacc == 1)
+ {
+ /* 16byte access */
+ if (dma->fifo == USB_FUNCTION_D0FIFO_DMA)
+ {
+ dst = (uint32_t)(&USB200.D0FIFOB0);
+ }
+ else
+ {
+ dst = (uint32_t)(&USB200.D1FIFOB0);
+ }
+ }
+ else
+ {
+ /* normal access */
+ if (dma->fifo == USB_FUNCTION_D0FIFO_DMA)
+ {
+ dst = (uint32_t)(&USB200.D0FIFO.UINT32);
+ }
+ else
+ {
+ dst = (uint32_t)(&USB200.D1FIFO.UINT32);
+ }
+ }
+ }
+ else if (size == 1)
+ {
+ /* 16bit access */
+ dfacc = 0; /* force normal access */
+ if (dma->fifo == USB_FUNCTION_D0FIFO_DMA)
+ {
+ dst = (uint32_t)(&USB200.D0FIFO.UINT32);
+ }
+ else
+ {
+ dst = (uint32_t)(&USB200.D1FIFO.UINT32);
+ }
+ dst += 2; /* short access */
+ }
+ else
+ {
+ /* 8bit access */
+ dfacc = 0; /* force normal access */
+
+ if (dma->fifo == USB_FUNCTION_D0FIFO_DMA)
+ {
+ dst = (uint32_t)(&USB200.D0FIFO.UINT32);
+ }
+ else
+ {
+ dst = (uint32_t)(&USB200.D1FIFO.UINT32);
+ }
+ dst += 3; /* byte access */
+ }
+#endif
+ }
+
+#ifdef CACHE_WRITEBACK
+ ptr = (uint32_t)dma->buffer;
+
+ if ((ptr & 0x20000000ul) == 0)
+ {
+ io_cwb((uint32_t)ptr, (uint32_t)(ptr) + trncount);
+ }
+#endif
+
+ if (dma->fifo == USB_FUNCTION_D0FIFO_DMA)
+ {
+ usb0_function_enable_dmac0(src, dst, trncount, size, dir, dma->fifo, dfacc);
+ }
+ else
+ {
+ usb0_function_enable_dmac1(src, dst, trncount, size, dir, dma->fifo, dfacc);
+ }
+}
+
+/*******************************************************************************
+* Function Name: usb0_function_enable_dmac0
+* Description : Enables DMA transfer on the information specified by the argument.
+* Arguments : uint32_t src : src address
+* : uint32_t dst : dst address
+* : uint32_t count : transfer byte
+* : uint32_t size : transfer size
+* : uint32_t dir : direction
+* : uint32_t fifo : FIFO(D0FIFO or D1FIFO)
+* : uint16_t dfacc : 0 : normal access
+* : : 1 : 16byte access
+* : : 2 : 32byte access
+* Return Value : none
+*******************************************************************************/
+static void usb0_function_enable_dmac0 (uint32_t src, uint32_t dst, uint32_t count,
+ uint32_t size, uint32_t dir, uint32_t fifo, uint16_t dfacc)
+{
+ dmac_transinfo_t trans_info;
+ uint32_t request_factor = 0;
+ int32_t ret;
+
+ /* ==== Variable setting for DMAC initialization ==== */
+ trans_info.src_addr = (uint32_t)src; /* Start address of transfer source */
+ trans_info.dst_addr = (uint32_t)dst; /* Start address of transfer destination */
+ trans_info.count = (uint32_t)count; /* Total byte count to be transferred */
+#ifndef __USB_FUNCTION_DF_ACC_ENABLE__
+ if (size == 0)
+ {
+ trans_info.src_size = DMAC_TRANS_SIZE_8; /* Transfer source transfer size */
+ trans_info.dst_size = DMAC_TRANS_SIZE_8; /* Transfer destination transfer size */
+ }
+ else if (size == 1)
+ {
+ trans_info.src_size = DMAC_TRANS_SIZE_16; /* Transfer source transfer size */
+ trans_info.dst_size = DMAC_TRANS_SIZE_16; /* Transfer destination transfer size */
+ }
+ else if (size == 2)
+ {
+ trans_info.src_size = DMAC_TRANS_SIZE_32; /* Transfer source transfer size */
+ trans_info.dst_size = DMAC_TRANS_SIZE_32; /* Transfer destination transfer size */
+ }
+ else
+ {
+ printf("size error!!\n");
+ }
+#else
+ if (dfacc == 2)
+ {
+ /* 32byte access */
+ trans_info.src_size = DMAC_TRANS_SIZE_256; /* Transfer source transfer size */
+ trans_info.dst_size = DMAC_TRANS_SIZE_256; /* Transfer destination transfer size */
+ }
+ else if (dfacc == 1)
+ {
+ /* 16byte access */
+ trans_info.src_size = DMAC_TRANS_SIZE_128; /* Transfer source transfer size */
+ trans_info.dst_size = DMAC_TRANS_SIZE_128; /* Transfer destination transfer size */
+ }
+ else
+ {
+ /* normal access */
+ if (size == 0)
+ {
+ trans_info.src_size = DMAC_TRANS_SIZE_8; /* Transfer source transfer size */
+ trans_info.dst_size = DMAC_TRANS_SIZE_8; /* Transfer destination transfer size */
+ }
+ else if (size == 1)
+ {
+ trans_info.src_size = DMAC_TRANS_SIZE_16; /* Transfer source transfer size */
+ trans_info.dst_size = DMAC_TRANS_SIZE_16; /* Transfer destination transfer size */
+ }
+ else if (size == 2)
+ {
+ trans_info.src_size = DMAC_TRANS_SIZE_32; /* Transfer source transfer size */
+ trans_info.dst_size = DMAC_TRANS_SIZE_32; /* Transfer destination transfer size */
+ }
+ else
+ {
+ printf("size error!!\n");
+ }
+ }
+#endif
+
+ if (dir == USB_FUNCTION_FIFO2BUF)
+ {
+ request_factor =DMAC_REQ_USB0_DMA0_RX; /* USB_0 channel 0 receive FIFO full */
+ trans_info.saddr_dir = DMAC_TRANS_ADR_NO_INC; /* Count direction of transfer source address */
+ trans_info.daddr_dir = DMAC_TRANS_ADR_INC; /* Count direction of transfer destination address */
+ }
+ else if (dir == USB_FUNCTION_BUF2FIFO)
+ {
+ request_factor =DMAC_REQ_USB0_DMA0_TX; /* USB_0 channel 0 receive FIFO empty */
+ trans_info.saddr_dir = DMAC_TRANS_ADR_INC; /* Count direction of transfer source address */
+ trans_info.daddr_dir = DMAC_TRANS_ADR_NO_INC; /* Count direction of transfer destination address */
+ }
+ else
+ {
+ /* Do Nothing */
+ }
+
+ /* ==== DMAC initialization ==== */
+ usb0_function_DMAC1_PeriReqInit((const dmac_transinfo_t *)&trans_info,
+ DMAC_MODE_REGISTER,
+ DMAC_SAMPLE_SINGLE,
+ request_factor,
+ 0); /* Don't care DMAC_REQ_REQD is setting in
+ usb0_function_DMAC1_PeriReqInit() */
+
+ /* ==== DMAC startup ==== */
+ ret = usb0_function_DMAC1_Open(DMAC_REQ_MODE_PERI);
+ if (ret != 0)
+ {
+ printf("DMAC1 Open error!!\n");
+ }
+
+ return;
+}
+
+/*******************************************************************************
+* Function Name: usb0_function_enable_dmac1
+* Description : Enables DMA transfer on the information specified by the argument.
+* Arguments : uint32_t src : src address
+* : uint32_t dst : dst address
+* : uint32_t count : transfer byte
+* : uint32_t size : transfer size
+* : uint32_t dir : direction
+* : uint32_t fifo : FIFO(D0FIFO or D1FIFO)
+* : uint16_t dfacc : 0 : normal access
+* : : 1 : 16byte access
+* : : 2 : 32byte access
+* Return Value : none
+*******************************************************************************/
+static void usb0_function_enable_dmac1 (uint32_t src, uint32_t dst, uint32_t count,
+ uint32_t size, uint32_t dir, uint32_t fifo, uint16_t dfacc)
+{
+ dmac_transinfo_t trans_info;
+ uint32_t request_factor = 0;
+ int32_t ret;
+
+ /* ==== Variable setting for DMAC initialization ==== */
+ trans_info.src_addr = (uint32_t)src; /* Start address of transfer source */
+ trans_info.dst_addr = (uint32_t)dst; /* Start address of transfer destination */
+ trans_info.count = (uint32_t)count; /* Total byte count to be transferred */
+#ifndef __USB_FUNCTION_DF_ACC_ENABLE__
+ if (size == 0)
+ {
+ trans_info.src_size = DMAC_TRANS_SIZE_8; /* Transfer source transfer size */
+ trans_info.dst_size = DMAC_TRANS_SIZE_8; /* Transfer destination transfer size */
+ }
+ else if (size == 1)
+ {
+ trans_info.src_size = DMAC_TRANS_SIZE_16; /* Transfer source transfer size */
+ trans_info.dst_size = DMAC_TRANS_SIZE_16; /* Transfer destination transfer size */
+ }
+ else if (size == 2)
+ {
+ trans_info.src_size = DMAC_TRANS_SIZE_32; /* Transfer source transfer size */
+ trans_info.dst_size = DMAC_TRANS_SIZE_32; /* Transfer destination transfer size */
+ }
+ else
+ {
+ printf("size error!!\n");
+ }
+#else
+ if (dfacc == 2)
+ {
+ /* 32byte access */
+ trans_info.src_size = DMAC_TRANS_SIZE_256; /* Transfer source transfer size */
+ trans_info.dst_size = DMAC_TRANS_SIZE_256; /* Transfer destination transfer size */
+ }
+ else if (dfacc == 1)
+ {
+ /* 16byte access */
+ trans_info.src_size = DMAC_TRANS_SIZE_128; /* Transfer source transfer size */
+ trans_info.dst_size = DMAC_TRANS_SIZE_128; /* Transfer destination transfer size */
+ }
+ else
+ {
+ /* normal access */
+ if (size == 0)
+ {
+ trans_info.src_size = DMAC_TRANS_SIZE_8; /* Transfer source transfer size */
+ trans_info.dst_size = DMAC_TRANS_SIZE_8; /* Transfer destination transfer size */
+ }
+ else if (size == 1)
+ {
+ trans_info.src_size = DMAC_TRANS_SIZE_16; /* Transfer source transfer size */
+ trans_info.dst_size = DMAC_TRANS_SIZE_16; /* Transfer destination transfer size */
+ }
+ else if (size == 2)
+ {
+ trans_info.src_size = DMAC_TRANS_SIZE_32; /* Transfer source transfer size */
+ trans_info.dst_size = DMAC_TRANS_SIZE_32; /* Transfer destination transfer size */
+ }
+ else
+ {
+ printf("size error!!\n");
+ }
+ }
+#endif
+
+ if (dir == USB_FUNCTION_FIFO2BUF)
+ {
+ request_factor =DMAC_REQ_USB0_DMA1_RX; /* USB_0 channel 0 receive FIFO full */
+ trans_info.saddr_dir = DMAC_TRANS_ADR_NO_INC; /* Count direction of transfer source address */
+ trans_info.daddr_dir = DMAC_TRANS_ADR_INC; /* Count direction of transfer destination address */
+ }
+ else if (dir == USB_FUNCTION_BUF2FIFO)
+ {
+ request_factor =DMAC_REQ_USB0_DMA1_TX; /* USB_0 channel 0 receive FIFO empty */
+ trans_info.saddr_dir = DMAC_TRANS_ADR_INC; /* Count direction of transfer source address */
+ trans_info.daddr_dir = DMAC_TRANS_ADR_NO_INC; /* Count direction of transfer destination address */
+ }
+ else
+ {
+ /* Do Nothing */
+ }
+
+ /* ==== DMAC initialization ==== */
+ usb0_function_DMAC2_PeriReqInit((const dmac_transinfo_t *)&trans_info,
+ DMAC_MODE_REGISTER,
+ DMAC_SAMPLE_SINGLE,
+ request_factor,
+ 0); /* Don't care DMAC_REQ_REQD is setting in
+ usb0_function_DMAC1_PeriReqInit() */
+
+ /* ==== DMAC startup ==== */
+ ret = usb0_function_DMAC2_Open(DMAC_REQ_MODE_PERI);
+ if (ret != 0)
+ {
+ printf("DMAC2 Open error!!\n");
+ }
+
+ return;
+}
+
+/*******************************************************************************
+* Function Name: Userdef_USB_usb0_function_stop_dma0
+* Description : Disables DMA transfer.
+* : This function should be executed to DMAC executed at the time
+* : of specification of D0_FIF0_DMA in dma->fifo.
+* Arguments : none
+* Return Value : uint32_t return Transfer Counter register(DMATCRn) value
+* : regarding to the bus width.
+*******************************************************************************/
+uint32_t Userdef_USB_usb0_function_stop_dma0 (void)
+{
+ uint32_t remain;
+
+ /* ==== DMAC release ==== */
+ usb0_function_DMAC1_Close(&remain);
+
+ return remain;
+}
+
+/*******************************************************************************
+* Function Name: Userdef_USB_usb0_function_stop_dma1
+* Description : Disables DMA transfer.
+* : This function should be executed to DMAC executed at the time
+* : of specification of D1_FIF0_DMA in dma->fifo.
+* Arguments : none
+* Return Value : uint32_t return Transfer Counter register(DMATCRn) value
+* : regarding to the bus width.
+*******************************************************************************/
+uint32_t Userdef_USB_usb0_function_stop_dma1 (void)
+{
+ uint32_t remain;
+
+ /* ==== DMAC release ==== */
+ usb0_function_DMAC2_Close(&remain);
+
+ return remain;
+}
+
+/* End of File */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/USBDevice/TARGET_RENESAS/TARGET_VK_RZ_A1H/usb1/inc/usb1_function.h Fri Apr 29 01:16:25 2016 +0100
@@ -0,0 +1,171 @@
+/*******************************************************************************
+* DISCLAIMER
+* This software is supplied by Renesas Electronics Corporation and is only
+* intended for use with Renesas products. No other uses are authorized. This
+* software is owned by Renesas Electronics Corporation and is protected under
+* all applicable laws, including copyright laws.
+* THIS SOFTWARE IS PROVIDED "AS IS" AND RENESAS MAKES NO WARRANTIES REGARDING
+* THIS SOFTWARE, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING BUT NOT
+* LIMITED TO WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE
+* AND NON-INFRINGEMENT. ALL SUCH WARRANTIES ARE EXPRESSLY DISCLAIMED.
+* TO THE MAXIMUM EXTENT PERMITTED NOT PROHIBITED BY LAW, NEITHER RENESAS
+* ELECTRONICS CORPORATION NOR ANY OF ITS AFFILIATED COMPANIES SHALL BE LIABLE
+* FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR
+* ANY REASON RELATED TO THIS SOFTWARE, EVEN IF RENESAS OR ITS AFFILIATES HAVE
+* BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
+* Renesas reserves the right, without notice, to make changes to this software
+* and to discontinue the availability of this software. By using this software,
+* you agree to the additional terms and conditions found by accessing the
+* following link:
+* http://www.renesas.com/disclaimer
+* Copyright (C) 2012 - 2014 Renesas Electronics Corporation. All rights reserved.
+*******************************************************************************/
+/*******************************************************************************
+* File Name : usb1_function.h
+* $Rev: 1116 $
+* $Date:: 2014-07-09 16:29:19 +0900#$
+* Description : RZ/A1H R7S72100 USB Sample Program
+*******************************************************************************/
+#ifndef USB1_FUNCTION_H
+#define USB1_FUNCTION_H
+
+
+/*******************************************************************************
+Includes <System Includes> , "Project Includes"
+*******************************************************************************/
+#include "devdrv_usb_function_api.h"
+#include "usb_function.h"
+
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/*******************************************************************************
+Typedef definitions
+*******************************************************************************/
+
+
+/*******************************************************************************
+Macro definitions
+*******************************************************************************/
+
+
+/*******************************************************************************
+Imported global variables and functions (from other files)
+*******************************************************************************/
+extern const uint16_t g_usb1_function_bit_set[];
+extern uint32_t g_usb1_function_data_count[USB_FUNCTION_MAX_PIPE_NO + 1];
+extern uint8_t *g_usb1_function_data_pointer[USB_FUNCTION_MAX_PIPE_NO + 1];
+
+extern uint16_t g_usb1_function_PipeIgnore[];
+extern uint16_t g_usb1_function_PipeTbl[];
+extern uint16_t g_usb1_function_pipe_status[];
+extern uint32_t g_usb1_function_PipeDataSize[];
+
+extern USB_FUNCTION_DMA_t g_usb1_function_DmaInfo[];
+extern uint16_t g_usb1_function_DmaPipe[];
+extern uint16_t g_usb1_function_DmaBval[];
+extern uint16_t g_usb1_function_DmaStatus[];
+
+extern uint16_t g_usb1_function_CtrZeroLengthFlag;
+
+extern uint16_t g_usb1_function_ConfigNum;
+extern uint16_t g_usb1_function_Alternate[USB_FUNCTION_ALT_NO];
+extern uint16_t g_usb1_function_RemoteWakeupFlag;
+extern uint16_t g_usb1_function_TestModeFlag;
+extern uint16_t g_usb1_function_TestModeSelectors;
+
+extern uint16_t g_usb1_function_ReqType;
+extern uint16_t g_usb1_function_ReqTypeType;
+extern uint16_t g_usb1_function_ReqTypeRecip;
+extern uint16_t g_usb1_function_ReqRequest;
+extern uint16_t g_usb1_function_ReqValue;
+extern uint16_t g_usb1_function_ReqIndex;
+extern uint16_t g_usb1_function_ReqLength;
+
+extern uint16_t g_usb1_function_EPTableIndex[USB_FUNCTION_MAX_EP_NO + 1];
+
+extern uint16_t g_usb1_function_pipecfg[USB_FUNCTION_MAX_PIPE_NO + 1];
+extern uint16_t g_usb1_function_pipebuf[USB_FUNCTION_MAX_PIPE_NO + 1];
+extern uint16_t g_usb1_function_pipemaxp[USB_FUNCTION_MAX_PIPE_NO + 1];
+extern uint16_t g_usb1_function_pipeperi[USB_FUNCTION_MAX_PIPE_NO + 1];
+
+
+/*******************************************************************************
+Exported global variables and functions (to be accessed by other files)
+*******************************************************************************/
+/* ==== common ==== */
+void usb1_function_dma_stop_d0(uint16_t pipe, uint32_t remain);
+void usb1_function_dma_stop_d1(uint16_t pipe, uint32_t remain);
+uint16_t usb1_function_is_hispeed(void);
+uint16_t usb1_function_is_hispeed_enable(void);
+uint16_t usb1_function_start_send_transfer(uint16_t pipe, uint32_t size, uint8_t *data);
+uint16_t usb1_function_write_buffer(uint16_t pipe);
+uint16_t usb1_function_write_buffer_c(uint16_t pipe);
+uint16_t usb1_function_write_buffer_d0(uint16_t pipe);
+uint16_t usb1_function_write_buffer_d1(uint16_t pipe);
+void usb1_function_start_receive_transfer(uint16_t pipe, uint32_t size, uint8_t *data);
+uint16_t usb1_function_read_buffer(uint16_t pipe);
+uint16_t usb1_function_read_buffer_c(uint16_t pipe);
+uint16_t usb1_function_read_buffer_d0(uint16_t pipe);
+uint16_t usb1_function_read_buffer_d1(uint16_t pipe);
+uint16_t usb1_function_change_fifo_port(uint16_t pipe, uint16_t fifosel, uint16_t isel, uint16_t mbw);
+void usb1_function_set_curpipe(uint16_t pipe, uint16_t fifosel, uint16_t isel, uint16_t mbw);
+void usb1_function_set_curpipe2(uint16_t pipe, uint16_t fifosel, uint16_t isel, uint16_t mbw, uint16_t dfacc);
+uint16_t usb1_function_get_mbw(uint32_t trncount, uint32_t dtptr);
+uint16_t usb1_function_read_dma(uint16_t pipe);
+void usb1_function_brdy_int(uint16_t status, uint16_t int_enb);
+void usb1_function_nrdy_int(uint16_t status, uint16_t int_enb);
+void usb1_function_bemp_int(uint16_t status, uint16_t int_enb);
+void usb1_function_setting_interrupt(uint8_t level);
+void usb1_function_reset_module(uint16_t clockmode);
+uint16_t usb1_function_get_buf_size(uint16_t pipe);
+uint16_t usb1_function_get_mxps(uint16_t pipe);
+void usb1_function_clear_brdy_sts(uint16_t pipe);
+void usb1_function_clear_bemp_sts(uint16_t pipe);
+void usb1_function_clear_nrdy_sts(uint16_t pipe);
+void usb1_function_set_pid_buf(uint16_t pipe);
+void usb1_function_set_pid_nak(uint16_t pipe);
+void usb1_function_set_pid_stall(uint16_t pipe);
+void usb1_function_clear_pid_stall(uint16_t pipe);
+uint16_t usb1_function_get_pid(uint16_t pipe);
+void usb1_function_set_sqclr(uint16_t pipe);
+void usb1_function_set_sqset(uint16_t pipe);
+void usb1_function_set_csclr(uint16_t pipe);
+void usb1_function_aclrm(uint16_t pipe);
+void usb1_function_set_aclrm(uint16_t pipe);
+void usb1_function_clr_aclrm(uint16_t pipe);
+uint16_t usb1_function_get_sqmon(uint16_t pipe);
+uint16_t usb1_function_get_inbuf(uint16_t pipe);
+
+/* ==== function ==== */
+void usb1_function_init_status(void);
+void usb1_function_InitModule(uint16_t mode);
+uint16_t usb1_function_CheckVBUStaus(void);
+void usb1_function_USB_FUNCTION_Attach(void);
+void usb1_function_USB_FUNCTION_Detach(void);
+void usb1_function_USB_FUNCTION_BusReset(void);
+void usb1_function_USB_FUNCTION_Resume(void);
+void usb1_function_USB_FUNCTION_Suspend(void);
+void usb1_function_USB_FUNCTION_TestMode(void);
+void usb1_function_ResetDCP(void);
+void usb1_function_ResetEP(uint16_t num);
+uint16_t usb1_function_EpToPipe(uint16_t ep);
+void usb1_function_InitEPTable(uint16_t Con_Num, uint16_t Int_Num, uint16_t Alt_Num);
+uint16_t usb1_function_GetConfigNum(void);
+uint16_t usb1_function_GetAltNum(uint16_t Con_Num, uint16_t Int_Num);
+uint16_t usb1_function_CheckRemoteWakeup(void);
+void usb1_function_clear_alt(void);
+void usb1_function_clear_pipe_tbl(void);
+void usb1_function_clear_ep_table_index(void);
+uint16_t usb1_function_GetInterfaceNum(uint16_t num);
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* USB1_FUNCTION_H */
+
+/* End of File */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/USBDevice/TARGET_RENESAS/TARGET_VK_RZ_A1H/usb1/inc/usb1_function_api.h Fri Apr 29 01:16:25 2016 +0100
@@ -0,0 +1,104 @@
+/*******************************************************************************
+* DISCLAIMER
+* This software is supplied by Renesas Electronics Corporation and is only
+* intended for use with Renesas products. No other uses are authorized. This
+* software is owned by Renesas Electronics Corporation and is protected under
+* all applicable laws, including copyright laws.
+* THIS SOFTWARE IS PROVIDED "AS IS" AND RENESAS MAKES NO WARRANTIES REGARDING
+* THIS SOFTWARE, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING BUT NOT
+* LIMITED TO WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE
+* AND NON-INFRINGEMENT. ALL SUCH WARRANTIES ARE EXPRESSLY DISCLAIMED.
+* TO THE MAXIMUM EXTENT PERMITTED NOT PROHIBITED BY LAW, NEITHER RENESAS
+* ELECTRONICS CORPORATION NOR ANY OF ITS AFFILIATED COMPANIES SHALL BE LIABLE
+* FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR
+* ANY REASON RELATED TO THIS SOFTWARE, EVEN IF RENESAS OR ITS AFFILIATES HAVE
+* BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
+* Renesas reserves the right, without notice, to make changes to this software
+* and to discontinue the availability of this software. By using this software,
+* you agree to the additional terms and conditions found by accessing the
+* following link:
+* http://www.renesas.com/disclaimer
+* Copyright (C) 2012 - 2014 Renesas Electronics Corporation. All rights reserved.
+*******************************************************************************/
+/*******************************************************************************
+* File Name : usb1_function_api.h
+* $Rev: 1116 $
+* $Date:: 2014-07-09 16:29:19 +0900#$
+* Description : RZ/A1H R7S72100 USB Sample Program
+*******************************************************************************/
+#ifndef USB1_FUNCTION_API_H
+#define USB1_FUNCTION_API_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/*******************************************************************************
+Includes <System Includes> , "Project Includes"
+*******************************************************************************/
+
+
+/*******************************************************************************
+Typedef definitions
+*******************************************************************************/
+
+
+/*******************************************************************************
+Macro definitions
+*******************************************************************************/
+
+
+/*******************************************************************************
+Variable Externs
+*******************************************************************************/
+
+
+/*******************************************************************************
+Exported global variables and functions (to be accessed by other files)
+*******************************************************************************/
+void usb1_api_function_init(uint8_t int_level, uint16_t mode, uint16_t clockmode);
+uint16_t usb1_api_function_IsConfigured(void);
+uint16_t usb1_function_GetDeviceState(void);
+uint16_t usb1_api_function_CtrlReadStart(uint32_t size, uint8_t *data);
+void usb1_api_function_CtrlWriteStart(uint32_t size, uint8_t *data);
+uint16_t usb1_api_function_start_send_transfer(uint16_t pipe, uint32_t size, uint8_t *data);
+uint16_t usb1_api_function_check_pipe_status(uint16_t pipe, uint32_t *size);
+void usb1_api_function_clear_pipe_status(uint16_t pipe);
+void usb1_api_function_start_receive_transfer(uint16_t pipe, uint32_t size, uint8_t *data);
+void usb1_api_function_set_pid_buf(uint16_t pipe);
+void usb1_api_function_set_pid_nak(uint16_t pipe);
+void usb1_api_function_set_pid_stall(uint16_t pipe);
+void usb1_api_function_clear_pid_stall(uint16_t pipe);
+uint16_t usb1_api_function_get_pid(uint16_t pipe);
+int32_t usb1_api_function_check_stall(uint16_t pipe);
+void usb1_api_function_set_sqclr(uint16_t pipe);
+void usb1_api_function_set_sqset(uint16_t pipe);
+void usb1_api_function_set_csclr(uint16_t pipe);
+void usb1_api_function_set_curpipe(uint16_t pipe, uint16_t fifosel, uint16_t isel, uint16_t mbw);
+void usb1_api_function_clear_brdy_sts(uint16_t pipe);
+void usb1_api_function_clear_bemp_sts(uint16_t pipe);
+void usb1_api_function_clear_nrdy_sts(uint16_t pipe);
+
+void usb1_function_ClearFeature(uint16_t type, uint16_t value, uint16_t index, uint16_t length);
+void usb1_function_SetFeature(uint16_t type, uint16_t value, uint16_t index, uint16_t length);
+void usb1_function_SetAddress(uint16_t type, uint16_t value, uint16_t index, uint16_t length);
+void usb1_function_SetDescriptor(uint16_t type, uint16_t value, uint16_t index, uint16_t length);
+void usb1_function_SetConfiguration(uint16_t type, uint16_t value, uint16_t index, uint16_t length);
+void usb1_function_SetInterface(uint16_t type, uint16_t value, uint16_t index, uint16_t length);
+void usb1_function_SynchFrame(uint16_t type, uint16_t value, uint16_t index, uint16_t length);
+void usb1_function_GetStatus(uint16_t type, uint16_t value, uint16_t index, uint16_t length);
+void usb1_function_GetDescriptor(uint16_t type, uint16_t value, uint16_t index, uint16_t length);
+void usb1_function_GetConfiguration(uint16_t type, uint16_t value, uint16_t index, uint16_t length);
+void usb1_function_GetInterface(uint16_t type, uint16_t value, uint16_t index, uint16_t length);
+void usb1_function_Resrv_0(uint16_t type, uint16_t value, uint16_t index, uint16_t length);
+void usb1_function_Resrv_123(uint16_t type, uint16_t value, uint16_t index, uint16_t length);
+void usb1_function_Resrv_4(uint16_t type, uint16_t value, uint16_t index, uint16_t length);
+void usb1_function_Resrv_5(uint16_t type, uint16_t value, uint16_t index, uint16_t length);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* USB1_FUNCTION_API_H */
+
+/* End of File */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/USBDevice/TARGET_RENESAS/TARGET_VK_RZ_A1H/usb1/inc/usb1_function_dmacdrv.h Fri Apr 29 01:16:25 2016 +0100
@@ -0,0 +1,142 @@
+/*******************************************************************************
+* DISCLAIMER
+* This software is supplied by Renesas Electronics Corporation and is only
+* intended for use with Renesas products. No other uses are authorized. This
+* software is owned by Renesas Electronics Corporation and is protected under
+* all applicable laws, including copyright laws.
+* THIS SOFTWARE IS PROVIDED "AS IS" AND RENESAS MAKES NO WARRANTIES REGARDING
+* THIS SOFTWARE, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING BUT NOT
+* LIMITED TO WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE
+* AND NON-INFRINGEMENT. ALL SUCH WARRANTIES ARE EXPRESSLY DISCLAIMED.
+* TO THE MAXIMUM EXTENT PERMITTED NOT PROHIBITED BY LAW, NEITHER RENESAS
+* ELECTRONICS CORPORATION NOR ANY OF ITS AFFILIATED COMPANIES SHALL BE LIABLE
+* FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR
+* ANY REASON RELATED TO THIS SOFTWARE, EVEN IF RENESAS OR ITS AFFILIATES HAVE
+* BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
+* Renesas reserves the right, without notice, to make changes to this software
+* and to discontinue the availability of this software. By using this software,
+* you agree to the additional terms and conditions found by accessing the
+* following link:
+* http://www.renesas.com/disclaimer
+* Copyright (C) 2012 - 2014 Renesas Electronics Corporation. All rights reserved.
+*******************************************************************************/
+/*******************************************************************************
+* File Name : usb1_function_dmacdrv.h
+* $Rev: 1116 $
+* $Date:: 2014-07-09 16:29:19 +0900#$
+* Description : RZ/A1H R7S72100 USB Sample Program
+*******************************************************************************/
+#ifndef USB1_FUNCTION_DMACDRV_H
+#define USB1_FUNCTION_DMACDRV_H
+
+
+/*******************************************************************************
+Includes <System Includes> , "Project Includes"
+*******************************************************************************/
+
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/*******************************************************************************
+Typedef definitions
+*******************************************************************************/
+typedef struct dmac_transinfo
+{
+ uint32_t src_addr; /* Transfer source address */
+ uint32_t dst_addr; /* Transfer destination address */
+ uint32_t count; /* Transfer byte count */
+ uint32_t src_size; /* Transfer source data size */
+ uint32_t dst_size; /* Transfer destination data size */
+ uint32_t saddr_dir; /* Transfer source address direction */
+ uint32_t daddr_dir; /* Transfer destination address direction */
+} dmac_transinfo_t;
+
+
+/*******************************************************************************
+Macro definitions
+*******************************************************************************/
+/* ==== Transfer specification of the sample program ==== */
+#define DMAC_SAMPLE_SINGLE (0) /* Single transfer */
+#define DMAC_SAMPLE_CONTINUATION (1) /* Continuous transfer (use REN bit) */
+
+/* ==== DMA modes ==== */
+#define DMAC_MODE_REGISTER (0) /* Register mode */
+#define DMAC_MODE_LINK (1) /* Link mode */
+
+/* ==== Transfer requests ==== */
+#define DMAC_REQ_MODE_EXT (0) /* External request */
+#define DMAC_REQ_MODE_PERI (1) /* On-chip peripheral module request */
+#define DMAC_REQ_MODE_SOFT (2) /* Auto-request (request by software) */
+
+/* ==== DMAC transfer sizes ==== */
+#define DMAC_TRANS_SIZE_8 (0) /* 8 bits */
+#define DMAC_TRANS_SIZE_16 (1) /* 16 bits */
+#define DMAC_TRANS_SIZE_32 (2) /* 32 bits */
+#define DMAC_TRANS_SIZE_64 (3) /* 64 bits */
+#define DMAC_TRANS_SIZE_128 (4) /* 128 bits */
+#define DMAC_TRANS_SIZE_256 (5) /* 256 bits */
+#define DMAC_TRANS_SIZE_512 (6) /* 512 bits */
+#define DMAC_TRANS_SIZE_1024 (7) /* 1024 bits */
+
+/* ==== Address increment for transferring ==== */
+#define DMAC_TRANS_ADR_NO_INC (1) /* Not increment */
+#define DMAC_TRANS_ADR_INC (0) /* Increment */
+
+/* ==== Method for detecting DMA request ==== */
+#define DMAC_REQ_DET_FALL (0) /* Falling edge detection */
+#define DMAC_REQ_DET_RISE (1) /* Rising edge detection */
+#define DMAC_REQ_DET_LOW (2) /* Low level detection */
+#define DMAC_REQ_DET_HIGH (3) /* High level detection */
+
+/* ==== Request Direction ==== */
+#define DMAC_REQ_DIR_SRC (0) /* DMAREQ is the source/ DMAACK is active when reading */
+#define DMAC_REQ_DIR_DST (1) /* DMAREQ is the destination/ DMAACK is active when writing */
+
+/* ==== Descriptors ==== */
+#define DMAC_DESC_HEADER (0) /* Header */
+#define DMAC_DESC_SRC_ADDR (1) /* Source Address */
+#define DMAC_DESC_DST_ADDR (2) /* Destination Address */
+#define DMAC_DESC_COUNT (3) /* Transaction Byte */
+#define DMAC_DESC_CHCFG (4) /* Channel Confg */
+#define DMAC_DESC_CHITVL (5) /* Channel Interval */
+#define DMAC_DESC_CHEXT (6) /* Channel Extension */
+#define DMAC_DESC_LINK_ADDR (7) /* Link Address */
+
+/* ==== On-chip peripheral module requests ===== */
+typedef enum dmac_request_factor
+{
+ DMAC_REQ_USB0_DMA0_TX, /* USB_0 channel 0 transmit FIFO empty */
+ DMAC_REQ_USB0_DMA0_RX, /* USB_0 channel 0 receive FIFO full */
+ DMAC_REQ_USB0_DMA1_TX, /* USB_0 channel 1 transmit FIFO empty */
+ DMAC_REQ_USB0_DMA1_RX, /* USB_0 channel 1 receive FIFO full */
+ DMAC_REQ_USB1_DMA0_TX, /* USB_1 channel 0 transmit FIFO empty */
+ DMAC_REQ_USB1_DMA0_RX, /* USB_1 channel 0 receive FIFO full */
+ DMAC_REQ_USB1_DMA1_TX, /* USB_1 channel 1 transmit FIFO empty */
+ DMAC_REQ_USB1_DMA1_RX, /* USB_1 channel 1 receive FIFO full */
+} dmac_request_factor_t;
+
+
+/*******************************************************************************
+Exported global variables and functions (to be accessed by other files)
+*******************************************************************************/
+void usb1_function_DMAC3_PeriReqInit(const dmac_transinfo_t *trans_info, uint32_t dmamode, uint32_t continuation,
+ uint32_t request_factor, uint32_t req_direction);
+int32_t usb1_function_DMAC3_Open(uint32_t req);
+void usb1_function_DMAC3_Close(uint32_t *remain);
+void usb1_function_DMAC3_Load_Set(uint32_t src_addr, uint32_t dst_addr, uint32_t count);
+
+void usb1_function_DMAC4_PeriReqInit(const dmac_transinfo_t *trans_info, uint32_t dmamode, uint32_t continuation,
+ uint32_t request_factor, uint32_t req_direction);
+int32_t usb1_function_DMAC4_Open(uint32_t req);
+void usb1_function_DMAC4_Close(uint32_t *remain);
+void usb1_function_DMAC4_Load_Set(uint32_t src_addr, uint32_t dst_addr, uint32_t count);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* USB1_FUNCTION_DMACDRV_H */
+
+/* End of File */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/USBDevice/TARGET_RENESAS/TARGET_VK_RZ_A1H/usb1/src/common/usb1_function_dataio.c Fri Apr 29 01:16:25 2016 +0100
@@ -0,0 +1,2932 @@
+/*******************************************************************************
+* DISCLAIMER
+* This software is supplied by Renesas Electronics Corporation and is only
+* intended for use with Renesas products. No other uses are authorized. This
+* software is owned by Renesas Electronics Corporation and is protected under
+* all applicable laws, including copyright laws.
+* THIS SOFTWARE IS PROVIDED "AS IS" AND RENESAS MAKES NO WARRANTIES REGARDING
+* THIS SOFTWARE, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING BUT NOT
+* LIMITED TO WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE
+* AND NON-INFRINGEMENT. ALL SUCH WARRANTIES ARE EXPRESSLY DISCLAIMED.
+* TO THE MAXIMUM EXTENT PERMITTED NOT PROHIBITED BY LAW, NEITHER RENESAS
+* ELECTRONICS CORPORATION NOR ANY OF ITS AFFILIATED COMPANIES SHALL BE LIABLE
+* FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR
+* ANY REASON RELATED TO THIS SOFTWARE, EVEN IF RENESAS OR ITS AFFILIATES HAVE
+* BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
+* Renesas reserves the right, without notice, to make changes to this software
+* and to discontinue the availability of this software. By using this software,
+* you agree to the additional terms and conditions found by accessing the
+* following link:
+* http://www.renesas.com/disclaimer
+* Copyright (C) 2012 - 2014 Renesas Electronics Corporation. All rights reserved.
+*******************************************************************************/
+/*******************************************************************************
+* File Name : usb1_function_dataio.c
+* $Rev: 1116 $
+* $Date:: 2014-07-09 16:29:19 +0900#$
+* Device(s) : RZ/A1H
+* Tool-Chain :
+* OS : None
+* H/W Platform :
+* Description : RZ/A1H R7S72100 USB Sample Program
+* Operation :
+* Limitations :
+*******************************************************************************/
+
+
+/*******************************************************************************
+Includes <System Includes> , "Project Includes"
+*******************************************************************************/
+#include "usb1_function.h"
+
+
+/*******************************************************************************
+Typedef definitions
+*******************************************************************************/
+
+
+/*******************************************************************************
+Macro definitions
+*******************************************************************************/
+
+
+/*******************************************************************************
+Imported global variables and functions (from other files)
+*******************************************************************************/
+
+
+/*******************************************************************************
+Exported global variables and functions (to be accessed by other files)
+*******************************************************************************/
+
+
+/*******************************************************************************
+Private global variables and functions
+*******************************************************************************/
+static uint16_t g_usb1_function_mbw[(USB_FUNCTION_MAX_PIPE_NO + 1)];
+
+static void usb1_function_start_receive_trns_c(uint16_t pipe, uint32_t size, uint8_t *data);
+static void usb1_function_start_receive_trns_d0(uint16_t pipe, uint32_t size, uint8_t *data);
+static void usb1_function_start_receive_trns_d1(uint16_t pipe, uint32_t size, uint8_t *data);
+static void usb1_function_start_receive_dma_d0(uint16_t pipe, uint32_t size, uint8_t *data);
+static void usb1_function_start_receive_dma_d1(uint16_t pipe, uint32_t size, uint8_t *data);
+static uint16_t usb1_function_read_dma_d0(uint16_t pipe);
+static uint16_t usb1_function_read_dma_d1(uint16_t pipe);
+static uint16_t usb1_function_write_dma_d0(uint16_t pipe);
+static uint16_t usb1_function_write_dma_d1(uint16_t pipe);
+
+static void usb1_function_read_c_fifo(uint16_t pipe, uint16_t count);
+static void usb1_function_write_c_fifo(uint16_t Pipe, uint16_t count);
+static void usb1_function_read_d0_fifo(uint16_t pipe, uint16_t count);
+static void usb1_function_write_d0_fifo(uint16_t pipe, uint16_t count);
+static void usb1_function_read_d1_fifo(uint16_t pipe, uint16_t count);
+static void usb1_function_write_d1_fifo(uint16_t pipe, uint16_t count);
+
+static void usb1_function_clear_transaction_counter(uint16_t pipe);
+static void usb1_function_set_transaction_counter(uint16_t pipe, uint32_t count);
+
+static uint32_t usb1_function_com_get_dmasize(uint32_t trncount, uint32_t dtptr);
+
+static uint16_t usb1_function_set_dfacc_d0(uint16_t mbw, uint32_t count);
+static uint16_t usb1_function_set_dfacc_d1(uint16_t mbw, uint32_t count);
+
+
+/*******************************************************************************
+* Function Name: usb1_function_start_send_transfer
+* Description : Starts the USB data communication using pipe specified by the argument.
+* Arguments : uint16_t pipe ; Pipe Number
+* : uint32_t size ; Data Size
+* : uint8_t *data ; Data Address
+* Return Value : DEVDRV_USBF_WRITEEND ; Write end
+* : DEVDRV_USBF_WRITESHRT ; short data
+* : DEVDRV_USBF_WRITING ; Continue of data write
+* : DEVDRV_USBF_WRITEDMA ; Write DMA
+* : DEVDRV_USBF_FIFOERROR ; FIFO status
+*******************************************************************************/
+uint16_t usb1_function_start_send_transfer (uint16_t pipe, uint32_t size, uint8_t * data)
+{
+ uint16_t status;
+ uint16_t usefifo;
+ uint16_t mbw;
+
+ g_usb1_function_data_count[pipe] = size;
+ g_usb1_function_data_pointer[pipe] = (uint8_t *)data;
+ g_usb1_function_pipe_status[pipe] = DEVDRV_USBF_PIPE_WAIT;
+
+ usb1_function_clear_bemp_sts(pipe);
+ usb1_function_clear_brdy_sts(pipe);
+ usb1_function_clear_nrdy_sts(pipe);
+
+ mbw = usb1_function_get_mbw(size, (uint32_t)data);
+
+ usefifo = (uint16_t)(g_usb1_function_PipeTbl[pipe] & USB_FUNCTION_FIFO_USE);
+
+ switch (usefifo)
+ {
+ case USB_FUNCTION_D0FIFO_USE:
+ case USB_FUNCTION_D0FIFO_DMA:
+ usefifo = USB_FUNCTION_D0USE;
+ break;
+
+ case USB_FUNCTION_D1FIFO_USE:
+ case USB_FUNCTION_D1FIFO_DMA:
+ usefifo = USB_FUNCTION_D1USE;
+ break;
+
+ default:
+ usefifo = USB_FUNCTION_CUSE;
+ break;
+ };
+
+ usb1_function_set_curpipe(USB_FUNCTION_PIPE0, usefifo, DEVDRV_USBF_NO, mbw);
+
+ usb1_function_clear_transaction_counter(pipe);
+
+ usb1_function_aclrm(pipe);
+
+ status = usb1_function_write_buffer(pipe);
+
+ if (status != DEVDRV_USBF_FIFOERROR)
+ {
+ usb1_function_set_pid_buf(pipe);
+ }
+
+ return status;
+}
+
+/*******************************************************************************
+* Function Name: usb1_function_write_buffer
+* Description : Writes data in the buffer allocated in the pipe specified by
+* : the argument. The FIFO for using is set in the pipe definition table.
+* Arguments : uint16_t pipe ; Pipe Number
+* Return Value : DEVDRV_USBF_WRITEEND ; Write end
+* : DEVDRV_USBF_WRITESHRT ; short data
+* : DEVDRV_USBF_WRITING ; Continue of data write
+* : DEVDRV_USBF_WRITEDMA ; Write DMA
+* : DEVDRV_USBF_FIFOERROR ; FIFO status
+*******************************************************************************/
+uint16_t usb1_function_write_buffer (uint16_t pipe)
+{
+ uint16_t status;
+ uint16_t usefifo;
+
+ g_usb1_function_PipeIgnore[pipe] = 0;
+ usefifo = (uint16_t)(g_usb1_function_PipeTbl[pipe] & USB_FUNCTION_FIFO_USE);
+
+ switch (usefifo)
+ {
+ case USB_FUNCTION_D0FIFO_USE:
+ status = usb1_function_write_buffer_d0(pipe);
+ break;
+
+ case USB_FUNCTION_D1FIFO_USE:
+ status = usb1_function_write_buffer_d1(pipe);
+ break;
+
+ case USB_FUNCTION_D0FIFO_DMA:
+ status = usb1_function_write_dma_d0(pipe);
+ break;
+
+ case USB_FUNCTION_D1FIFO_DMA:
+ status = usb1_function_write_dma_d1(pipe);
+ break;
+
+ default:
+ status = usb1_function_write_buffer_c(pipe);
+ break;
+ };
+
+ switch (status)
+ {
+ case DEVDRV_USBF_WRITING: /* Continue of data write */
+ usb1_function_enable_nrdy_int(pipe); /* Error (NORES or STALL) */
+ usb1_function_enable_brdy_int(pipe); /* Enable Ready Interrupt */
+ break;
+
+ case DEVDRV_USBF_WRITEEND: /* End of data write */
+ case DEVDRV_USBF_WRITESHRT: /* End of data write */
+ usb1_function_disable_brdy_int(pipe); /* Disable Ready Interrupt */
+ usb1_function_clear_nrdy_sts(pipe);
+ usb1_function_enable_nrdy_int(pipe); /* Error (NORES or STALL) */
+ /* for last transfer */
+ usb1_function_enable_bemp_int(pipe); /* Enable Empty Interrupt */
+ break;
+
+ case DEVDRV_USBF_WRITEDMA: /* DMA write */
+ usb1_function_clear_nrdy_sts(pipe);
+ usb1_function_enable_nrdy_int(pipe); /* Error (NORES or STALL) */
+ break;
+
+ case DEVDRV_USBF_FIFOERROR: /* FIFO access status */
+ default:
+ usb1_function_disable_brdy_int(pipe); /* Disable Ready Interrupt */
+ usb1_function_disable_bemp_int(pipe); /* Disable Empty Interrupt */
+ g_usb1_function_pipe_status[pipe] = DEVDRV_USBF_FIFOERROR;
+ break;
+ }
+
+ return status; /* End or Err or Continue */
+}
+
+/*******************************************************************************
+* Function Name: usb1_function_write_buffer_c
+* Description : Writes data in the buffer allocated in the pipe specified in
+* : the argument. Writes data by CPU transfer using CFIFO.
+* Arguments : uint16_t pipe ; Pipe Number
+* Return Value : DEVDRV_USBF_WRITEEND ; Write end
+* : DEVDRV_USBF_WRITESHRT ; short data
+* : DEVDRV_USBF_WRITING ; Continue of data write
+* : DEVDRV_USBF_WRITEDMA ; Write DMA
+* : DEVDRV_USBF_FIFOERROR ; FIFO status
+*******************************************************************************/
+uint16_t usb1_function_write_buffer_c (uint16_t pipe)
+{
+ uint32_t count;
+ uint16_t size;
+ uint16_t buffer;
+ uint16_t mxps;
+ uint16_t status;
+ uint16_t mbw;
+
+ if (g_usb1_function_CtrZeroLengthFlag == 1)
+ {
+ g_usb1_function_CtrZeroLengthFlag = 0; /* Zero Length Packet Flag CLR */
+ return DEVDRV_USBF_WRITEEND;
+ }
+
+ mbw = usb1_function_get_mbw(g_usb1_function_data_count[pipe], (uint32_t)g_usb1_function_data_pointer[pipe]);
+ if (pipe == USB_FUNCTION_PIPE0)
+ {
+ buffer = usb1_function_change_fifo_port(pipe, USB_FUNCTION_CUSE, USB_FUNCTION_CFIFO_WRITE, mbw);
+ }
+ else
+ {
+ buffer = usb1_function_change_fifo_port(pipe, USB_FUNCTION_CUSE, DEVDRV_USBF_NO, mbw);
+ }
+
+ if (buffer == DEVDRV_USBF_FIFOERROR) /* FIFO access status */
+ {
+ return DEVDRV_USBF_FIFOERROR;
+ }
+
+ size = usb1_function_get_buf_size(pipe); /* Data buffer size */
+ mxps = usb1_function_get_mxps(pipe); /* Max Packet Size */
+
+ if (g_usb1_function_data_count[pipe] <= (uint32_t)size)
+ {
+ status = DEVDRV_USBF_WRITEEND; /* write continues */
+ count = g_usb1_function_data_count[pipe];
+
+ if (count == 0)
+ {
+ status = DEVDRV_USBF_WRITESHRT; /* Null Packet is end of write */
+ }
+
+ if ((count % mxps) != 0)
+ {
+ status = DEVDRV_USBF_WRITESHRT; /* Short Packet is end of write */
+ }
+ }
+ else
+ {
+ status = DEVDRV_USBF_WRITING; /* write continues */
+ count = (uint32_t)size;
+ }
+
+ usb1_function_write_c_fifo(pipe, (uint16_t)count);
+
+ if (g_usb1_function_data_count[pipe] < (uint32_t)size)
+ {
+ g_usb1_function_data_count[pipe] = 0;
+
+ if (RZA_IO_RegRead_16(&USB201.CFIFOCTR, USB_CFIFOCTR_BVAL_SHIFT, USB_CFIFOCTR_BVAL) == 0)
+ {
+ USB201.CFIFOCTR = USB_FUNCTION_BITBVAL; /* Short Packet */
+ g_usb1_function_CtrZeroLengthFlag = 1; /* Zero Length Packet Flag */
+ }
+ }
+ else
+ {
+ g_usb1_function_data_count[pipe] -= count;
+ }
+
+ return status; /* End or Err or Continue */
+}
+
+/*******************************************************************************
+* Function Name: usb1_function_write_buffer_d0
+* Description : Writes data in the buffer allocated in the pipe specified in the argument.
+* : Writes data by CPU transfer using D0FIFO.
+* Arguments : uint16_t pipe ; Pipe Number
+* Return Value : DEVDRV_USBF_WRITEEND ; Write end
+* : DEVDRV_USBF_WRITESHRT ; short data
+* : DEVDRV_USBF_WRITING ; Continue of data write
+* : DEVDRV_USBF_WRITEDMA ; Write DMA
+* : DEVDRV_USBF_FIFOERROR ; FIFO status
+*******************************************************************************/
+uint16_t usb1_function_write_buffer_d0 (uint16_t pipe)
+{
+ uint32_t count;
+ uint16_t size;
+ uint16_t buffer;
+ uint16_t mxps;
+ uint16_t status;
+ uint16_t mbw;
+
+ mbw = usb1_function_get_mbw(g_usb1_function_data_count[pipe], (uint32_t)g_usb1_function_data_pointer[pipe]);
+ buffer = usb1_function_change_fifo_port(pipe, USB_FUNCTION_D0USE, DEVDRV_USBF_NO, mbw);
+ if (buffer == DEVDRV_USBF_FIFOERROR) /* FIFO access status */
+ {
+ return DEVDRV_USBF_FIFOERROR;
+ }
+
+ size = usb1_function_get_buf_size(pipe); /* Data buffer size */
+ mxps = usb1_function_get_mxps(pipe); /* Max Packet Size */
+
+ if (g_usb1_function_data_count[pipe] <= (uint32_t)size)
+ {
+ status = DEVDRV_USBF_WRITEEND; /* write continues */
+ count = g_usb1_function_data_count[pipe];
+
+ if (count == 0)
+ {
+ status = DEVDRV_USBF_WRITESHRT; /* Null Packet is end of write */
+ }
+
+ if ((count % mxps) != 0)
+ {
+ status = DEVDRV_USBF_WRITESHRT; /* Short Packet is end of write */
+ }
+ }
+ else
+ {
+ status = DEVDRV_USBF_WRITING; /* write continues */
+ count = (uint32_t)size;
+ }
+
+ usb1_function_write_d0_fifo(pipe, (uint16_t)count);
+
+ if (g_usb1_function_data_count[pipe] < (uint32_t)size)
+ {
+ g_usb1_function_data_count[pipe] = 0;
+ if (RZA_IO_RegRead_16(&USB201.D0FIFOCTR, USB_DnFIFOCTR_BVAL_SHIFT, USB_DnFIFOCTR_BVAL) == 0)
+ {
+ USB201.D0FIFOCTR = USB_FUNCTION_BITBVAL; /* Short Packet */
+ }
+ }
+ else
+ {
+ g_usb1_function_data_count[pipe] -= count;
+ }
+
+ return status; /* End or Err or Continue */
+}
+
+/*******************************************************************************
+* Function Name: usb1_function_write_buffer_d1
+* Description : Writes data in the buffer allocated in the pipe specified in the argument.
+* : Writes data by CPU transfer using D1FIFO.
+* Arguments : uint16_t pipe ; Pipe Number
+* Return Value : DEVDRV_USBF_WRITEEND ; Write end
+* : DEVDRV_USBF_WRITESHRT ; short data
+* : DEVDRV_USBF_WRITING ; Continue of data write
+* : DEVDRV_USBF_WRITEDMA ; Write DMA
+* : DEVDRV_USBF_FIFOERROR ; FIFO status
+*******************************************************************************/
+uint16_t usb1_function_write_buffer_d1 (uint16_t pipe)
+{
+ uint32_t count;
+ uint16_t size;
+ uint16_t buffer;
+ uint16_t mxps;
+ uint16_t status;
+ uint16_t mbw;
+
+ mbw = usb1_function_get_mbw(g_usb1_function_data_count[pipe], (uint32_t)g_usb1_function_data_pointer[pipe]);
+ buffer = usb1_function_change_fifo_port(pipe, USB_FUNCTION_D1USE, DEVDRV_USBF_NO, mbw);
+
+ if (buffer == DEVDRV_USBF_FIFOERROR) /* FIFO access status */
+ {
+ return DEVDRV_USBF_FIFOERROR;
+ }
+
+ size = usb1_function_get_buf_size(pipe); /* Data buffer size */
+ mxps = usb1_function_get_mxps(pipe); /* Max Packet Size */
+
+ if (g_usb1_function_data_count[pipe] <= (uint32_t)size)
+ {
+ status = DEVDRV_USBF_WRITEEND; /* write continues */
+ count = g_usb1_function_data_count[pipe];
+
+ if (count == 0)
+ {
+ status = DEVDRV_USBF_WRITESHRT; /* Null Packet is end of write */
+ }
+
+ if ((count % mxps) != 0)
+ {
+ status = DEVDRV_USBF_WRITESHRT; /* Short Packet is end of write */
+ }
+ }
+ else
+ {
+ status = DEVDRV_USBF_WRITING; /* write continues */
+ count = (uint32_t)size;
+ }
+
+ usb1_function_write_d1_fifo(pipe, (uint16_t)count);
+
+ if (g_usb1_function_data_count[pipe] < (uint32_t)size)
+ {
+ g_usb1_function_data_count[pipe] = 0;
+
+ if (RZA_IO_RegRead_16(&USB201.D1FIFOCTR, USB_DnFIFOCTR_BVAL_SHIFT, USB_DnFIFOCTR_BVAL) == 0)
+ {
+ USB201.D1FIFOCTR = USB_FUNCTION_BITBVAL; /* Short Packet */
+ }
+ }
+ else
+ {
+ g_usb1_function_data_count[pipe] -= count;
+ }
+
+ return status; /* End or Err or Continue */
+}
+
+/*******************************************************************************
+* Function Name: usb1_function_write_dma_d0
+* Description : Writes data in the buffer allocated in the pipe specified in the argument.
+* : Writes data by DMA transfer using D0FIFO.
+* : The DMA-ch for using is specified by Userdef_USB_usb1_function_start_dma().
+* Arguments : uint16_t pipe ; Pipe Number
+* Return Value : DEVDRV_USBF_WRITEEND : Write end
+* : DEVDRV_USBF_WRITESHRT : short data
+* : DEVDRV_USBF_WRITING : Continue of data write
+* : DEVDRV_USBF_WRITEDMA : Write DMA
+* : DEVDRV_USBF_FIFOERROR : FIFO status
+*******************************************************************************/
+static uint16_t usb1_function_write_dma_d0 (uint16_t pipe)
+{
+ uint32_t count;
+ uint16_t size;
+ uint16_t buffer;
+ uint16_t status;
+ uint16_t mbw;
+ uint16_t dfacc = 0;
+
+ mbw = usb1_function_get_mbw(g_usb1_function_data_count[pipe], (uint32_t)g_usb1_function_data_pointer[pipe]);
+ buffer = usb1_function_change_fifo_port(pipe, USB_FUNCTION_D0DMA, DEVDRV_USBF_NO, mbw);
+
+ if (buffer == DEVDRV_USBF_FIFOERROR) /* FIFO access status */
+ {
+ return DEVDRV_USBF_FIFOERROR;
+ }
+
+ size = usb1_function_get_buf_size(pipe); /* Data buffer size */
+ count = g_usb1_function_data_count[pipe];
+
+ if (count != 0)
+ {
+ g_usb1_function_DmaPipe[USB_FUNCTION_D0FIFO] = pipe;
+
+ if ((count % size) != 0)
+ {
+ g_usb1_function_DmaBval[USB_FUNCTION_D0FIFO] = 1;
+ }
+ else
+ {
+ g_usb1_function_DmaBval[USB_FUNCTION_D0FIFO] = 0;
+ }
+
+ dfacc = usb1_function_set_dfacc_d0(mbw, count);
+
+ if (mbw == USB_FUNCTION_BITMBW_32)
+ {
+ g_usb1_function_DmaInfo[USB_FUNCTION_D0FIFO].size = 2; /* 32bit transfer */
+ }
+ else if (mbw == USB_FUNCTION_BITMBW_16)
+ {
+ g_usb1_function_DmaInfo[USB_FUNCTION_D0FIFO].size = 1; /* 16bit transfer */
+ }
+ else
+ {
+ g_usb1_function_DmaInfo[USB_FUNCTION_D0FIFO].size = 0; /* 8bit transfer */
+ }
+
+ g_usb1_function_DmaInfo[USB_FUNCTION_D0FIFO].fifo = USB_FUNCTION_D0FIFO_DMA;
+ g_usb1_function_DmaInfo[USB_FUNCTION_D0FIFO].dir = USB_FUNCTION_BUF2FIFO;
+ g_usb1_function_DmaInfo[USB_FUNCTION_D0FIFO].buffer = (uint32_t)g_usb1_function_data_pointer[pipe];
+ g_usb1_function_DmaInfo[USB_FUNCTION_D0FIFO].bytes = count;
+
+ Userdef_USB_usb1_function_start_dma(&g_usb1_function_DmaInfo[USB_FUNCTION_D0FIFO], dfacc);
+
+ usb1_function_set_curpipe2(pipe, USB_FUNCTION_D0DMA, DEVDRV_USBF_NO, mbw, dfacc);
+
+ RZA_IO_RegWrite_16(&USB201.D0FIFOSEL, 1, USB_DnFIFOSEL_DREQE_SHIFT, USB_DnFIFOSEL_DREQE);
+
+ g_usb1_function_data_count[pipe] = 0;
+ g_usb1_function_data_pointer[pipe] += count;
+ status = DEVDRV_USBF_WRITEDMA; /* DMA write */
+ }
+ else
+ {
+ if (RZA_IO_RegRead_16(&USB201.D0FIFOCTR, USB_DnFIFOCTR_BVAL_SHIFT, USB_DnFIFOCTR_BVAL) == 0)
+ {
+ RZA_IO_RegWrite_16(&USB201.D0FIFOCTR, 1, USB_DnFIFOCTR_BVAL_SHIFT, USB_DnFIFOCTR_BVAL); /* Short Packet */
+ }
+ status = DEVDRV_USBF_WRITESHRT; /* Short Packet is end of write */
+ }
+
+ return status; /* End or Err or Continue */
+}
+
+/*******************************************************************************
+* Function Name: usb1_function_write_dma_d1
+* Description : Writes data in the buffer allocated in the pipe specified in the argument.
+* : Writes data by DMA transfer using D1FIFO.
+* : The DMA-ch for using is specified by Userdef_USB_usb1_function_start_dma().
+* Arguments : uint16_t pipe ; Pipe Number
+* Return Value : DEVDRV_USBF_WRITEEND : Write end
+* : DEVDRV_USBF_WRITESHRT : short data
+* : DEVDRV_USBF_WRITING : Continue of data write
+* : DEVDRV_USBF_WRITEDMA : Write DMA
+* : DEVDRV_USBF_FIFOERROR : FIFO status
+*******************************************************************************/
+static uint16_t usb1_function_write_dma_d1 (uint16_t pipe)
+{
+ uint32_t count;
+ uint16_t size;
+ uint16_t buffer;
+ uint16_t status;
+ uint16_t mbw;
+ uint16_t dfacc=0;
+
+ mbw = usb1_function_get_mbw(g_usb1_function_data_count[pipe], (uint32_t)g_usb1_function_data_pointer[pipe]);
+ buffer = usb1_function_change_fifo_port(pipe, USB_FUNCTION_D1DMA, DEVDRV_USBF_NO, mbw);
+
+ if (buffer == DEVDRV_USBF_FIFOERROR) /* FIFO access status */
+ {
+ return DEVDRV_USBF_FIFOERROR;
+ }
+
+ size = usb1_function_get_buf_size(pipe); /* Data buffer size */
+ count = g_usb1_function_data_count[pipe];
+
+ if (count != 0)
+ {
+ g_usb1_function_DmaPipe[USB_FUNCTION_D1FIFO] = pipe;
+ if ((count % size) != 0)
+ {
+ g_usb1_function_DmaBval[USB_FUNCTION_D1FIFO] = 1;
+ }
+ else
+ {
+ g_usb1_function_DmaBval[USB_FUNCTION_D1FIFO] = 0;
+ }
+
+ dfacc = usb1_function_set_dfacc_d1(mbw, count);
+
+ if (mbw == USB_FUNCTION_BITMBW_32)
+ {
+ g_usb1_function_DmaInfo[USB_FUNCTION_D1FIFO].size = 2; /* 32bit transfer */
+ }
+ else if (mbw == USB_FUNCTION_BITMBW_16)
+ {
+ g_usb1_function_DmaInfo[USB_FUNCTION_D1FIFO].size = 1; /* 16bit transfer */
+ }
+ else
+ {
+ g_usb1_function_DmaInfo[USB_FUNCTION_D1FIFO].size = 0; /* 8bit transfer */
+ }
+
+ g_usb1_function_DmaInfo[USB_FUNCTION_D1FIFO].fifo = USB_FUNCTION_D1FIFO_DMA;
+ g_usb1_function_DmaInfo[USB_FUNCTION_D1FIFO].dir = USB_FUNCTION_BUF2FIFO;
+ g_usb1_function_DmaInfo[USB_FUNCTION_D1FIFO].buffer = (uint32_t)g_usb1_function_data_pointer[pipe];
+ g_usb1_function_DmaInfo[USB_FUNCTION_D1FIFO].bytes = count;
+
+ Userdef_USB_usb1_function_start_dma(&g_usb1_function_DmaInfo[USB_FUNCTION_D1FIFO], dfacc);
+
+ usb1_function_set_curpipe2(pipe, USB_FUNCTION_D1DMA, DEVDRV_USBF_NO, mbw, dfacc);
+
+ RZA_IO_RegWrite_16(&USB201.D1FIFOSEL, 1, USB_DnFIFOSEL_DREQE_SHIFT, USB_DnFIFOSEL_DREQE);
+
+ g_usb1_function_data_count[pipe] = 0;
+ g_usb1_function_data_pointer[pipe] += count;
+
+ status = DEVDRV_USBF_WRITEDMA; /* DMA write */
+ }
+ else
+ {
+ if (RZA_IO_RegRead_16(&USB201.D1FIFOCTR, USB_DnFIFOCTR_BVAL_SHIFT, USB_DnFIFOCTR_BVAL) == 0)
+ {
+ RZA_IO_RegWrite_16(&USB201.D1FIFOCTR, 1, USB_DnFIFOCTR_BVAL_SHIFT, USB_DnFIFOCTR_BVAL); /* Short Packet */
+ }
+ status = DEVDRV_USBF_WRITESHRT; /* Short Packet is end of write */
+ }
+
+ return status; /* End or Err or Continue */
+}
+
+/*******************************************************************************
+* Function Name: usb1_function_start_receive_transfer
+* Description : Starts USB data reception using the pipe specified in the argument.
+* : The FIFO for using is set in the pipe definition table.
+* Arguments : uint16_t pipe ; Pipe Number
+* : uint32_t size ; Data Size
+* : uint8_t *data ; Data Address
+* Return Value : none
+*******************************************************************************/
+void usb1_function_start_receive_transfer (uint16_t pipe, uint32_t size, uint8_t * data)
+{
+ uint16_t usefifo;
+
+ usb1_function_clear_bemp_sts(pipe);
+ usb1_function_clear_brdy_sts(pipe);
+ usb1_function_clear_nrdy_sts(pipe);
+
+ usefifo = (uint16_t)(g_usb1_function_PipeTbl[pipe] & USB_FUNCTION_FIFO_USE);
+
+ switch (usefifo)
+ {
+ case USB_FUNCTION_D0FIFO_USE:
+ usb1_function_start_receive_trns_d0(pipe, size, data);
+ break;
+
+ case USB_FUNCTION_D1FIFO_USE:
+ usb1_function_start_receive_trns_d1(pipe, size, data);
+ break;
+
+ case USB_FUNCTION_D0FIFO_DMA:
+ usb1_function_start_receive_dma_d0(pipe, size, data);
+ break;
+
+ case USB_FUNCTION_D1FIFO_DMA:
+ usb1_function_start_receive_dma_d1(pipe, size, data);
+ break;
+
+ default:
+ usb1_function_start_receive_trns_c(pipe, size, data);
+ break;
+ }
+}
+
+/*******************************************************************************
+* Function Name: usb1_function_start_receive_trns_c
+* Description : Reads data from the buffer allocated in the pipe specified in the argument.
+* : Reads data by CPU transfer using CFIFO.
+* : When storing data in the buffer allocated in the pipe specified in the
+* : argument, BRDY interrupt is generated to read data
+* : in the interrupt.
+* Arguments : uint16_t pipe ; Pipe Number
+* : uint32_t size ; Data Size
+* : uint8_t *data ; Data Address
+* Return Value : none
+*******************************************************************************/
+static void usb1_function_start_receive_trns_c (uint16_t pipe, uint32_t size, uint8_t * data)
+{
+ uint16_t mbw;
+
+ usb1_function_set_pid_nak(pipe);
+ g_usb1_function_data_count[pipe] = size;
+ g_usb1_function_data_pointer[pipe] = (uint8_t *)data;
+ g_usb1_function_PipeIgnore[pipe] = 0;
+
+ g_usb1_function_PipeDataSize[pipe] = size;
+ g_usb1_function_pipe_status[pipe] = DEVDRV_USBF_PIPE_WAIT;
+
+ mbw = usb1_function_get_mbw(size, (uint32_t)data);
+ usb1_function_set_curpipe(USB_FUNCTION_PIPE0, USB_FUNCTION_CUSE, USB_FUNCTION_CFIFO_READ, mbw);
+ USB201.CFIFOCTR = USB_FUNCTION_BITBCLR;
+
+ usb1_function_set_transaction_counter(pipe, size);
+
+ usb1_function_aclrm(pipe);
+
+ usb1_function_enable_nrdy_int(pipe);
+ usb1_function_enable_brdy_int(pipe);
+
+ usb1_function_set_pid_buf(pipe);
+}
+
+/*******************************************************************************
+* Function Name: usb1_function_start_receive_trns_d0
+* Description : Reads data from the buffer allocated in the pipe specified in the argument.
+* : Reads data by CPU transfer using D0FIFO.
+* : This function does not read data from the buffer.
+* : When storing data in the buffer allocated in the pipe specified
+* : in the argument, BRDY interrupt is generated to read data in the
+* : interrupt.
+* Arguments : uint16_t pipe ; Pipe Number
+* : uint32_t size ; Data Size
+* : uint8_t *data ; Data Address
+* Return Value : none
+*******************************************************************************/
+static void usb1_function_start_receive_trns_d0 (uint16_t pipe, uint32_t size, uint8_t * data)
+{
+ uint16_t mbw;
+
+ usb1_function_set_pid_nak(pipe);
+ g_usb1_function_data_count[pipe] = size;
+ g_usb1_function_data_pointer[pipe] = (uint8_t *)data;
+ g_usb1_function_PipeIgnore[pipe] = 0;
+
+ g_usb1_function_PipeDataSize[pipe] = size;
+ g_usb1_function_pipe_status[pipe] = DEVDRV_USBF_PIPE_WAIT;
+
+ mbw = usb1_function_get_mbw(size, (uint32_t)data);
+ usb1_function_set_curpipe(USB_FUNCTION_PIPE0, USB_FUNCTION_D0USE, DEVDRV_USBF_NO, mbw);
+
+ usb1_function_set_transaction_counter(pipe, size);
+
+ usb1_function_aclrm(pipe);
+
+ usb1_function_enable_nrdy_int(pipe);
+ usb1_function_enable_brdy_int(pipe);
+
+ usb1_function_set_pid_buf(pipe);
+}
+
+/*******************************************************************************
+* Function Name: usb1_function_start_receive_trns_d1
+* Description : Reads data from the buffer allocated in the pipe specified in the argument.
+* : Reads data by CPU transfer using D1FIFO.
+* : This function does not read data from the buffer.
+* : When storing data in the buffer allocated in the pipe specified
+* : in the argument, BRDY interrupt is generated to read data.
+* Arguments : uint16_t pipe ; Pipe Number
+* : uint32_t size ; Data Size
+* : uint8_t *data ; Data Address
+* Return Value : none
+*******************************************************************************/
+static void usb1_function_start_receive_trns_d1 (uint16_t pipe, uint32_t size, uint8_t * data)
+{
+ uint16_t mbw;
+
+ usb1_function_set_pid_nak(pipe);
+ g_usb1_function_data_count[pipe] = size;
+ g_usb1_function_data_pointer[pipe] = (uint8_t *)data;
+ g_usb1_function_PipeIgnore[pipe] = 0;
+
+ g_usb1_function_PipeDataSize[pipe] = size;
+ g_usb1_function_pipe_status[pipe] = DEVDRV_USBF_PIPE_WAIT;
+
+ mbw = usb1_function_get_mbw(size, (uint32_t)data);
+ usb1_function_set_curpipe(USB_FUNCTION_PIPE0, USB_FUNCTION_D1USE, DEVDRV_USBF_NO, mbw);
+
+ usb1_function_set_transaction_counter(pipe, size);
+
+ usb1_function_aclrm(pipe);
+
+ usb1_function_enable_nrdy_int(pipe);
+ usb1_function_enable_brdy_int(pipe);
+
+ usb1_function_set_pid_buf(pipe);
+}
+
+/*******************************************************************************
+* Function Name: usb1_function_start_receive_dma_d0
+* Description : Reads data from the buffer allocated in the pipe specified in the argument.
+* : Reads data by DMA transfer using D0FIFO.
+* : This function does not read data from the buffer.
+* : When storing data in the buffer allocated in the pipe specified
+* : in the argument, delivered read request to DMAC to read data from
+* : the buffer by DMAC.
+* Arguments : uint16_t pipe ; Pipe Number
+* : uint32_t size ; Data Size
+* : uint8_t *data ; Data Address
+* Return Value : none
+*******************************************************************************/
+static void usb1_function_start_receive_dma_d0 (uint16_t pipe, uint32_t size, uint8_t * data)
+{
+ uint16_t mbw;
+
+ usb1_function_set_pid_nak(pipe);
+ g_usb1_function_data_count[pipe] = size;
+ g_usb1_function_data_pointer[pipe] = (uint8_t *)data;
+ g_usb1_function_PipeIgnore[pipe] = 0;
+
+ g_usb1_function_PipeDataSize[pipe] = 0;
+ g_usb1_function_pipe_status[pipe] = DEVDRV_USBF_PIPE_WAIT;
+
+ mbw = usb1_function_get_mbw(size, (uint32_t)data);
+ usb1_function_set_curpipe(USB_FUNCTION_PIPE0, USB_FUNCTION_D0USE, DEVDRV_USBF_NO, mbw);
+
+ usb1_function_set_transaction_counter(pipe, size);
+
+ usb1_function_aclrm(pipe);
+
+ if (RZA_IO_RegRead_16(&g_usb1_function_pipecfg[pipe], USB_PIPECFG_BFRE_SHIFT, USB_PIPECFG_BFRE) == 1)
+ {
+ usb1_function_read_dma(pipe);
+
+ usb1_function_enable_nrdy_int(pipe);
+ usb1_function_enable_brdy_int(pipe);
+ }
+ else
+ {
+ usb1_function_enable_nrdy_int(pipe);
+ usb1_function_enable_brdy_int(pipe);
+ }
+
+ usb1_function_set_pid_buf(pipe);
+}
+
+/*******************************************************************************
+* Function Name: usb1_function_start_receive_dma_d1
+* Description : Read data from the buffer allocated in the pipe specified in the argument.
+* : Reads data by DMA transfer using D0FIFO.
+* : This function does not read data from the buffer.
+* : When storing data in the buffer allocated in the pipe specified
+* : in the argument, delivered read request to DMAC to read data from
+* : the buffer by DMAC.
+* Arguments : uint16_t pipe ; Pipe Number
+* : uint32_t size ; Data Size
+* : uint8_t *data ; Data Address
+* Return Value : none
+*******************************************************************************/
+static void usb1_function_start_receive_dma_d1 (uint16_t pipe, uint32_t size, uint8_t * data)
+{
+ uint16_t mbw;
+
+ usb1_function_set_pid_nak(pipe);
+ g_usb1_function_data_count[pipe] = size;
+ g_usb1_function_data_pointer[pipe] = (uint8_t *)data;
+ g_usb1_function_PipeIgnore[pipe] = 0;
+
+ g_usb1_function_PipeDataSize[pipe] = 0;
+ g_usb1_function_pipe_status[pipe] = DEVDRV_USBF_PIPE_WAIT;
+
+ mbw = usb1_function_get_mbw(size, (uint32_t)data);
+ usb1_function_set_curpipe(USB_FUNCTION_PIPE0, USB_FUNCTION_D1USE, DEVDRV_USBF_NO, mbw);
+
+ usb1_function_set_transaction_counter(pipe, size);
+
+ usb1_function_aclrm(pipe);
+
+ if (RZA_IO_RegRead_16(&g_usb1_function_pipecfg[pipe], USB_PIPECFG_BFRE_SHIFT, USB_PIPECFG_BFRE) == 1)
+ {
+ usb1_function_read_dma(pipe);
+
+ usb1_function_enable_nrdy_int(pipe);
+ usb1_function_enable_brdy_int(pipe);
+ }
+ else
+ {
+ usb1_function_enable_nrdy_int(pipe);
+ usb1_function_enable_brdy_int(pipe);
+ }
+
+ usb1_function_set_pid_buf(pipe);
+}
+
+/*******************************************************************************
+* Function Name: usb1_function_read_buffer
+* Description : Reads data from the buffer allocated in the pipe specified
+* : in the argument.
+* : Uses FIF0 set in the pipe definition table.
+* Arguments : uint16_t pipe ; Pipe Number
+* Return Value : USB_FUNCTION_READEND ; Read end
+* : USB_FUNCTION_READSHRT ; short data
+* : USB_FUNCTION_READING ; Continue of data read
+* : USB_FUNCTION_READOVER ; buffer over
+* : DEVDRV_USBF_FIFOERROR ; FIFO status
+*******************************************************************************/
+uint16_t usb1_function_read_buffer (uint16_t pipe)
+{
+ uint16_t status;
+
+ g_usb1_function_PipeIgnore[pipe] = 0;
+
+ if ((g_usb1_function_PipeTbl[pipe] & USB_FUNCTION_FIFO_USE) == USB_FUNCTION_D0FIFO_USE)
+ {
+ status = usb1_function_read_buffer_d0(pipe);
+ }
+ else if ((g_usb1_function_PipeTbl[pipe] & USB_FUNCTION_FIFO_USE) == USB_FUNCTION_D1FIFO_USE)
+ {
+ status = usb1_function_read_buffer_d1(pipe);
+ }
+ else
+ {
+ status = usb1_function_read_buffer_c(pipe);
+ }
+
+ switch (status)
+ {
+ case USB_FUNCTION_READING: /* Continue of data read */
+ break;
+
+ case USB_FUNCTION_READEND: /* End of data read */
+ case USB_FUNCTION_READSHRT: /* End of data read */
+ usb1_function_disable_brdy_int(pipe);
+ g_usb1_function_PipeDataSize[pipe] -= g_usb1_function_data_count[pipe];
+ g_usb1_function_pipe_status[pipe] = DEVDRV_USBF_PIPE_DONE;
+ break;
+
+ case USB_FUNCTION_READOVER: /* buffer over */
+ if ((g_usb1_function_PipeTbl[pipe] & USB_FUNCTION_FIFO_USE) == USB_FUNCTION_D0FIFO_USE)
+ {
+ USB201.D0FIFOCTR = USB_FUNCTION_BITBCLR; /* Clear BCLR */
+ }
+ else if ((g_usb1_function_PipeTbl[pipe] & USB_FUNCTION_FIFO_USE) == USB_FUNCTION_D1FIFO_USE)
+ {
+ USB201.D1FIFOCTR = USB_FUNCTION_BITBCLR; /* Clear BCLR */
+ }
+ else
+ {
+ USB201.CFIFOCTR = USB_FUNCTION_BITBCLR; /* Clear BCLR */
+ }
+ usb1_function_disable_brdy_int(pipe); /* Disable Ready Interrupt */
+ g_usb1_function_PipeDataSize[pipe] -= g_usb1_function_data_count[pipe];
+ g_usb1_function_pipe_status[pipe] = DEVDRV_USBF_FIFOERROR;
+ break;
+
+ case DEVDRV_USBF_FIFOERROR: /* FIFO access status */
+ default:
+ usb1_function_disable_brdy_int(pipe); /* Disable Ready Interrupt */
+ g_usb1_function_pipe_status[pipe] = DEVDRV_USBF_FIFOERROR;
+ break;
+ }
+
+ return status; /* End or Err or Continue */
+}
+
+/*******************************************************************************
+* Function Name: usb1_function_read_buffer_c
+* Description : Reads data from the buffer allocated in the pipe specified in the argument.
+* : Reads data by CPU transfer using CFIFO.
+* Arguments : uint16_t pipe ; Pipe Number
+* Return Value : USB_FUNCTION_READEND ; Read end
+* : USB_FUNCTION_READSHRT ; short data
+* : USB_FUNCTION_READING ; Continue of data read
+* : USB_FUNCTION_READOVER ; buffer over
+* : DEVDRV_USBF_FIFOERROR ; FIFO status
+*******************************************************************************/
+uint16_t usb1_function_read_buffer_c (uint16_t pipe)
+{
+ uint32_t count;
+ uint32_t dtln;
+ uint16_t buffer;
+ uint16_t mxps;
+ uint16_t status;
+ uint16_t mbw;
+
+ mbw = usb1_function_get_mbw(g_usb1_function_data_count[pipe], (uint32_t)g_usb1_function_data_pointer[pipe]);
+ buffer = usb1_function_change_fifo_port(pipe, USB_FUNCTION_CUSE, DEVDRV_USBF_NO, mbw);
+
+ if (buffer == DEVDRV_USBF_FIFOERROR) /* FIFO access status */
+ {
+ return DEVDRV_USBF_FIFOERROR;
+ }
+
+ dtln = (uint32_t)(buffer & USB_FUNCTION_BITDTLN);
+ mxps = usb1_function_get_mxps(pipe); /* Max Packet Size */
+
+ if (g_usb1_function_data_count[pipe] < dtln) /* Buffer Over ? */
+ {
+ status = USB_FUNCTION_READOVER;
+ usb1_function_set_pid_nak(pipe); /* Set NAK */
+ count = g_usb1_function_data_count[pipe];
+ }
+ else if (g_usb1_function_data_count[pipe] == dtln) /* just Receive Size */
+ {
+ status = USB_FUNCTION_READEND;
+ usb1_function_set_pid_nak(pipe); /* Set NAK */
+ count = dtln;
+
+ if (count == 0)
+ {
+ status = USB_FUNCTION_READSHRT; /* Null Packet receive */
+ }
+
+ if ((count % mxps) != 0)
+ {
+ status = USB_FUNCTION_READSHRT; /* Short Packet receive */
+ }
+ }
+ else /* continue Receive data */
+ {
+ status = USB_FUNCTION_READING;
+ count = dtln;
+
+ if (count == 0)
+ {
+ status = USB_FUNCTION_READSHRT; /* Null Packet receive */
+ usb1_function_set_pid_nak(pipe); /* Set NAK */
+ }
+
+ if ((count % mxps) != 0)
+ {
+ status = USB_FUNCTION_READSHRT; /* Short Packet receive */
+ usb1_function_set_pid_nak(pipe); /* Set NAK */
+ }
+ }
+
+ if (count == 0) /* 0 length packet */
+ {
+ USB201.CFIFOCTR = USB_FUNCTION_BITBCLR; /* Clear BCLR */
+ }
+ else
+ {
+ usb1_function_read_c_fifo(pipe, (uint16_t)count);
+ }
+
+ g_usb1_function_data_count[pipe] -= count;
+
+ return status; /* End or Err or Continue */
+}
+
+/*******************************************************************************
+* Function Name: usb1_function_read_buffer_d0
+* Description : Reads data from the buffer allocated in the pipe specified in
+* : the argument.
+* : Reads data by CPU transfer using D0FIFO.
+* Arguments : uint16_t pipe ; Pipe Number
+* Return Value : USB_FUNCTION_READEND ; Read end
+* : USB_FUNCTION_READSHRT ; short data
+* : USB_FUNCTION_READING ; Continue of data read
+* : USB_FUNCTION_READOVER ; buffer over
+* : DEVDRV_USBF_FIFOERROR ; FIFO status
+*******************************************************************************/
+uint16_t usb1_function_read_buffer_d0 (uint16_t pipe)
+{
+ uint32_t count;
+ uint32_t dtln;
+ uint16_t buffer;
+ uint16_t mxps;
+ uint16_t status;
+ uint16_t mbw;
+ uint16_t pipebuf_size;
+
+ mbw = usb1_function_get_mbw(g_usb1_function_data_count[pipe], (uint32_t)g_usb1_function_data_pointer[pipe]);
+ buffer = usb1_function_change_fifo_port(pipe, USB_FUNCTION_D0USE, DEVDRV_USBF_NO, mbw);
+
+ if (buffer == DEVDRV_USBF_FIFOERROR) /* FIFO access status */
+ {
+ return DEVDRV_USBF_FIFOERROR;
+ }
+
+ dtln = (uint32_t)(buffer & USB_FUNCTION_BITDTLN);
+ mxps = usb1_function_get_mxps(pipe); /* Max Packet Size */
+
+ if (g_usb1_function_data_count[pipe] < dtln) /* Buffer Over ? */
+ {
+ status = USB_FUNCTION_READOVER;
+ usb1_function_set_pid_nak(pipe); /* Set NAK */
+ count = g_usb1_function_data_count[pipe];
+ }
+ else if (g_usb1_function_data_count[pipe] == dtln) /* just Receive Size */
+ {
+ status = USB_FUNCTION_READEND;
+ usb1_function_set_pid_nak(pipe); /* Set NAK */
+ count = dtln;
+
+ if (count == 0)
+ {
+ status = USB_FUNCTION_READSHRT; /* Null Packet receive */
+ }
+
+ if ((count % mxps) != 0)
+ {
+ status = USB_FUNCTION_READSHRT; /* Short Packet receive */
+ }
+ }
+ else /* continue Receive data */
+ {
+ status = USB_FUNCTION_READING;
+ count = dtln;
+
+ if (count == 0)
+ {
+ status = USB_FUNCTION_READSHRT; /* Null Packet receive */
+ usb1_function_set_pid_nak(pipe); /* Set NAK */
+ }
+
+ if ((count % mxps) != 0)
+ {
+ status = USB_FUNCTION_READSHRT; /* Short Packet receive */
+ usb1_function_set_pid_nak(pipe); /* Set NAK */
+ }
+ else
+ {
+ pipebuf_size = usb1_function_get_buf_size(pipe); /* Data buffer size */
+
+ if (count != pipebuf_size)
+ {
+ status = USB_FUNCTION_READSHRT; /* Short Packet receive */
+ usb1_function_set_pid_nak(pipe); /* Set NAK */
+ }
+ }
+ }
+
+ if (count == 0) /* 0 length packet */
+ {
+ USB201.D0FIFOCTR = USB_FUNCTION_BITBCLR; /* Clear BCLR */
+ }
+ else
+ {
+ usb1_function_read_d0_fifo(pipe, (uint16_t)count);
+ }
+
+ g_usb1_function_data_count[pipe] -= count;
+
+ return status; /* End or Err or Continue */
+}
+
+/*******************************************************************************
+* Function Name: usb1_function_read_buffer_d1
+* Description : Reads data from the buffer allocated in the pipe specified
+* : in the argument.
+* : Reads data by CPU transfer using D1FIFO.
+* Arguments : uint16_t pipe ; Pipe Number
+* Return Value : USB_FUNCTION_READEND ; Read end
+* : USB_FUNCTION_READSHRT ; short data
+* : USB_FUNCTION_READING ; Continue of data read
+* : USB_FUNCTION_READOVER ; buffer over
+* : DEVDRV_USBF_FIFOERROR ; FIFO status
+*******************************************************************************/
+uint16_t usb1_function_read_buffer_d1 (uint16_t pipe)
+{
+ uint32_t count;
+ uint32_t dtln;
+ uint16_t buffer;
+ uint16_t mxps;
+ uint16_t status;
+ uint16_t mbw;
+ uint16_t pipebuf_size;
+
+ mbw = usb1_function_get_mbw(g_usb1_function_data_count[pipe], (uint32_t)g_usb1_function_data_pointer[pipe]);
+ buffer = usb1_function_change_fifo_port(pipe, USB_FUNCTION_D1USE, DEVDRV_USBF_NO, mbw);
+
+ if (buffer == DEVDRV_USBF_FIFOERROR) /* FIFO access status */
+ {
+ return DEVDRV_USBF_FIFOERROR;
+ }
+
+ dtln = (uint32_t)(buffer & USB_FUNCTION_BITDTLN);
+ mxps = usb1_function_get_mxps(pipe); /* Max Packet Size */
+
+ if (g_usb1_function_data_count[pipe] < dtln) /* Buffer Over ? */
+ {
+ status = USB_FUNCTION_READOVER;
+ usb1_function_set_pid_nak(pipe); /* Set NAK */
+ count = g_usb1_function_data_count[pipe];
+ }
+ else if (g_usb1_function_data_count[pipe] == dtln) /* just Receive Size */
+ {
+ status = USB_FUNCTION_READEND;
+ usb1_function_set_pid_nak(pipe); /* Set NAK */
+ count = dtln;
+ if (count == 0)
+ {
+ status = USB_FUNCTION_READSHRT; /* Null Packet receive */
+ }
+
+ if ((count % mxps) != 0)
+ {
+ status = USB_FUNCTION_READSHRT; /* Short Packet receive */
+ }
+ }
+ else /* continue Receive data */
+ {
+ status = USB_FUNCTION_READING;
+ count = dtln;
+ if (count == 0)
+ {
+ status = USB_FUNCTION_READSHRT; /* Null Packet receive */
+ usb1_function_set_pid_nak(pipe); /* Set NAK */
+ }
+
+ if ((count % mxps) != 0)
+ {
+ status = USB_FUNCTION_READSHRT; /* Short Packet receive */
+ usb1_function_set_pid_nak(pipe); /* Set NAK */
+ }
+ else
+ {
+ pipebuf_size = usb1_function_get_buf_size(pipe); /* Data buffer size */
+
+ if (count != pipebuf_size)
+ {
+ status = USB_FUNCTION_READSHRT; /* Short Packet receive */
+ usb1_function_set_pid_nak(pipe); /* Set NAK */
+ }
+ }
+ }
+
+ if (count == 0) /* 0 length packet */
+ {
+ USB201.D1FIFOCTR = USB_FUNCTION_BITBCLR; /* Clear BCLR */
+ }
+ else
+ {
+ usb1_function_read_d1_fifo(pipe, (uint16_t)count);
+ }
+
+ g_usb1_function_data_count[pipe] -= count;
+
+ return status; /* End or Err or Continue */
+}
+
+/*******************************************************************************
+* Function Name: usb1_function_read_dma
+* Description : Reads data from the buffer allocated in the pipe specified
+* : in the argument.
+* : Reads data by DMA transfer using D0FIFO or D1FIFO.
+* Arguments : uint16_t pipe ; Pipe Number
+* Return Value : USB_FUNCTION_READEND ; Read end
+* : USB_FUNCTION_READSHRT ; short data
+* : USB_FUNCTION_READING ; Continue of data read
+* : USB_FUNCTION_READOVER ; buffer over
+* : DEVDRV_USBF_FIFOERROR ; FIFO status
+*******************************************************************************/
+uint16_t usb1_function_read_dma (uint16_t pipe)
+{
+ uint16_t status;
+
+ g_usb1_function_PipeIgnore[pipe] = 0;
+ if ((g_usb1_function_PipeTbl[pipe] & USB_FUNCTION_FIFO_USE) == USB_FUNCTION_D0FIFO_DMA)
+ {
+ status = usb1_function_read_dma_d0(pipe);
+ }
+ else
+ {
+ status = usb1_function_read_dma_d1(pipe);
+ }
+
+ switch (status)
+ {
+ case USB_FUNCTION_READING: /* Continue of data read */
+ break;
+
+ case USB_FUNCTION_READZERO: /* End of data read */
+ usb1_function_disable_brdy_int(pipe);
+ g_usb1_function_pipe_status[pipe] = DEVDRV_USBF_PIPE_DONE;
+ break;
+
+ case USB_FUNCTION_READEND: /* End of data read */
+ case USB_FUNCTION_READSHRT: /* End of data read */
+ usb1_function_disable_brdy_int(pipe);
+
+ if (RZA_IO_RegRead_16(&g_usb1_function_pipecfg[pipe], USB_PIPECFG_BFRE_SHIFT, USB_PIPECFG_BFRE) == 1)
+ {
+ g_usb1_function_PipeDataSize[pipe] -= g_usb1_function_data_count[pipe];
+ }
+ break;
+
+ case USB_FUNCTION_READOVER: /* buffer over */
+ usb1_function_disable_brdy_int(pipe); /* Disable Ready Interrupt */
+
+ if (RZA_IO_RegRead_16(&g_usb1_function_pipecfg[pipe], USB_PIPECFG_BFRE_SHIFT, USB_PIPECFG_BFRE) == 1)
+ {
+ g_usb1_function_PipeDataSize[pipe] -= g_usb1_function_data_count[pipe];
+ }
+ g_usb1_function_pipe_status[pipe] = DEVDRV_USBF_FIFOERROR;
+ break;
+
+ case DEVDRV_USBF_FIFOERROR: /* FIFO access status */
+ default:
+ usb1_function_disable_brdy_int(pipe); /* Disable Ready Interrupt */
+ g_usb1_function_pipe_status[pipe] = DEVDRV_USBF_FIFOERROR;
+ break;
+ }
+
+ return status; /* End or Err or Continue */
+}
+
+/*******************************************************************************
+* Function Name: usb1_function_read_dma_d0
+* Description : Writes data in the buffer allocated in the pipe specified
+* : in the argument.
+* : Reads data by DMA transfer using D0FIFO.
+* Arguments : uint16_t pipe ; Pipe Number
+* Return Value : USB_FUNCTION_READEND ; Read end
+* : USB_FUNCTION_READSHRT ; short data
+* : USB_FUNCTION_READZERO ; zero data
+* : USB_FUNCTION_READING ; Continue of data read
+* : USB_FUNCTION_READOVER ; buffer over
+* : DEVDRV_USBF_FIFOERROR ; FIFO status
+*******************************************************************************/
+static uint16_t usb1_function_read_dma_d0 (uint16_t pipe)
+{
+ uint32_t count;
+ uint32_t dtln;
+ uint16_t buffer;
+ uint16_t mxps;
+ uint16_t status;
+ uint16_t mbw;
+ uint16_t dfacc = 0;
+ uint16_t pipebuf_size;
+
+ g_usb1_function_DmaStatus[USB_FUNCTION_D0FIFO] = USB_FUNCTION_DMA_READY;
+
+ mbw = usb1_function_get_mbw(g_usb1_function_data_count[pipe], (uint32_t)g_usb1_function_data_pointer[pipe]);
+
+ if (RZA_IO_RegRead_16(&g_usb1_function_pipecfg[pipe], USB_PIPECFG_BFRE_SHIFT, USB_PIPECFG_BFRE) == 1)
+ {
+ count = g_usb1_function_data_count[pipe];
+ status = USB_FUNCTION_READING;
+ }
+ else
+ {
+ buffer = usb1_function_change_fifo_port(pipe, USB_FUNCTION_D0DMA, DEVDRV_USBF_NO, mbw);
+
+ if (buffer == DEVDRV_USBF_FIFOERROR) /* FIFO access status */
+ {
+ return DEVDRV_USBF_FIFOERROR;
+ }
+
+ dtln = (uint32_t)(buffer & USB_FUNCTION_BITDTLN);
+ mxps = usb1_function_get_mxps(pipe); /* Max Packet Size */
+
+ if (g_usb1_function_data_count[pipe] < dtln) /* Buffer Over ? */
+ {
+ status = USB_FUNCTION_READOVER;
+ count = g_usb1_function_data_count[pipe];
+ }
+ else if (g_usb1_function_data_count[pipe] == dtln) /* just Receive Size */
+ {
+ status = USB_FUNCTION_READEND;
+ count = dtln;
+ if (count == 0)
+ {
+ status = USB_FUNCTION_READSHRT; /* Null Packet receive */
+ }
+
+ if ((count % mxps) != 0)
+ {
+ status = USB_FUNCTION_READSHRT; /* Short Packet receive */
+ }
+ }
+ else /* continue Receive data */
+ {
+ status = USB_FUNCTION_READING;
+ count = dtln;
+
+ if (count == 0)
+ {
+ status = USB_FUNCTION_READSHRT; /* Null Packet receive */
+ }
+
+ if ((count % mxps) != 0)
+ {
+ status = USB_FUNCTION_READSHRT; /* Short Packet receive */
+ }
+ else
+ {
+ pipebuf_size = usb1_function_get_buf_size(pipe); /* Data buffer size */
+ if (count != pipebuf_size)
+ {
+ status = USB_FUNCTION_READSHRT; /* Short Packet receive */
+ }
+ }
+ }
+ }
+
+ if (count == 0) /* 0 length packet */
+ {
+ if (RZA_IO_RegRead_16(&g_usb1_function_pipecfg[pipe], USB_PIPECFG_BFRE_SHIFT, USB_PIPECFG_BFRE) == 0)
+ {
+ USB201.D0FIFOCTR = USB_FUNCTION_BITBCLR; /* Clear BCLR */
+ status = USB_FUNCTION_READZERO; /* Null Packet receive */
+ }
+ else
+ {
+ usb1_function_set_curpipe(pipe, USB_FUNCTION_D0DMA, DEVDRV_USBF_NO, mbw);
+ /* transaction counter No set */
+ /* FRDY = 1, DTLN = 0 -> BRDY */
+ }
+ }
+ else
+ {
+ dfacc = usb1_function_set_dfacc_d0(mbw, count);
+
+ if (mbw == USB_FUNCTION_BITMBW_32)
+ {
+ g_usb1_function_DmaInfo[USB_FUNCTION_D0FIFO].size = 2; /* 32bit transfer */
+ }
+ else if (mbw == USB_FUNCTION_BITMBW_16)
+ {
+ g_usb1_function_DmaInfo[USB_FUNCTION_D0FIFO].size = 1; /* 16bit transfer */
+ }
+ else
+ {
+ g_usb1_function_DmaInfo[USB_FUNCTION_D0FIFO].size = 0; /* 8bit transfer */
+ }
+
+ g_usb1_function_DmaPipe[USB_FUNCTION_D0FIFO] = pipe; /* not use in read operation */
+ g_usb1_function_DmaBval[USB_FUNCTION_D0FIFO] = 0; /* not use in read operation */
+
+ g_usb1_function_DmaInfo[USB_FUNCTION_D0FIFO].fifo = USB_FUNCTION_D0FIFO_DMA;
+ g_usb1_function_DmaInfo[USB_FUNCTION_D0FIFO].dir = USB_FUNCTION_FIFO2BUF;
+ g_usb1_function_DmaInfo[USB_FUNCTION_D0FIFO].buffer = (uint32_t)g_usb1_function_data_pointer[pipe];
+ g_usb1_function_DmaInfo[USB_FUNCTION_D0FIFO].bytes = count;
+
+ if (status == USB_FUNCTION_READING)
+ {
+ g_usb1_function_DmaStatus[USB_FUNCTION_D0FIFO] = USB_FUNCTION_DMA_BUSY;
+ }
+ else
+ {
+ g_usb1_function_DmaStatus[USB_FUNCTION_D0FIFO] = USB_FUNCTION_DMA_BUSYEND;
+ }
+
+ Userdef_USB_usb1_function_start_dma(&g_usb1_function_DmaInfo[USB_FUNCTION_D0FIFO], dfacc);
+
+ usb1_function_set_curpipe2(pipe, USB_FUNCTION_D0DMA, DEVDRV_USBF_NO, mbw, dfacc);
+
+ RZA_IO_RegWrite_16(&USB201.D0FIFOSEL,
+ 1,
+ USB_DnFIFOSEL_DREQE_SHIFT,
+ USB_DnFIFOSEL_DREQE);
+ }
+
+ if (RZA_IO_RegRead_16(&g_usb1_function_pipecfg[pipe], USB_PIPECFG_BFRE_SHIFT, USB_PIPECFG_BFRE) == 0)
+ {
+ g_usb1_function_data_count[pipe] -= count;
+ g_usb1_function_data_pointer[pipe] += count;
+ g_usb1_function_PipeDataSize[pipe] += count;
+ }
+
+ return status; /* End or Err or Continue */
+}
+
+/*******************************************************************************
+* Function Name: usb1_function_read_dma_d1
+* Description : Reads data from the buffer allocated in the pipe specified in
+* : the argument.
+* : Reads data by DMA transfer using D1FIFO.
+* Arguments : uint16_t pipe ; Pipe Number
+* Return Value : USB_FUNCTION_READEND ; Read end
+* : USB_FUNCTION_READSHRT ; short data
+* : USB_FUNCTION_READZERO ; zero data
+* : USB_FUNCTION_READING ; Continue of data read
+* : USB_FUNCTION_READOVER ; buffer over
+* : DEVDRV_USBF_FIFOERROR ; FIFO status
+*******************************************************************************/
+static uint16_t usb1_function_read_dma_d1 (uint16_t pipe)
+{
+ uint32_t count;
+ uint32_t dtln;
+ uint16_t buffer;
+ uint16_t mxps;
+ uint16_t status;
+ uint16_t mbw;
+ uint16_t dfacc = 0;
+ uint16_t pipebuf_size;
+
+ g_usb1_function_DmaStatus[USB_FUNCTION_D1FIFO] = USB_FUNCTION_DMA_READY;
+
+ mbw = usb1_function_get_mbw(g_usb1_function_data_count[pipe], (uint32_t)g_usb1_function_data_pointer[pipe]);
+
+ if (RZA_IO_RegRead_16(&g_usb1_function_pipecfg[pipe], USB_PIPECFG_BFRE_SHIFT, USB_PIPECFG_BFRE) == 1)
+ {
+ count = g_usb1_function_data_count[pipe];
+ status = USB_FUNCTION_READING;
+ }
+ else
+ {
+ buffer = usb1_function_change_fifo_port(pipe, USB_FUNCTION_D1DMA, DEVDRV_USBF_NO, mbw);
+ if (buffer == DEVDRV_USBF_FIFOERROR) /* FIFO access status */
+ {
+ return DEVDRV_USBF_FIFOERROR;
+ }
+
+ dtln = (uint32_t)(buffer & USB_FUNCTION_BITDTLN);
+ mxps = usb1_function_get_mxps(pipe); /* Max Packet Size */
+
+ if (g_usb1_function_data_count[pipe] < dtln) /* Buffer Over ? */
+ {
+ status = USB_FUNCTION_READOVER;
+ count = g_usb1_function_data_count[pipe];
+ }
+ else if (g_usb1_function_data_count[pipe] == dtln) /* just Receive Size */
+ {
+ status = USB_FUNCTION_READEND;
+ count = dtln;
+ if (count == 0)
+ {
+ status = USB_FUNCTION_READSHRT; /* Null Packet receive */
+ }
+
+ if ((count % mxps) != 0)
+ {
+ status = USB_FUNCTION_READSHRT; /* Short Packet receive */
+ }
+ }
+ else /* continue Receive data */
+ {
+ status = USB_FUNCTION_READING;
+ count = dtln;
+ if (count == 0)
+ {
+ status = USB_FUNCTION_READSHRT; /* Null Packet receive */
+ }
+
+ if ((count % mxps) != 0)
+ {
+ status = USB_FUNCTION_READSHRT; /* Short Packet receive */
+ }
+ else
+ {
+ pipebuf_size = usb1_function_get_buf_size(pipe); /* Data buffer size */
+ if (count != pipebuf_size)
+ {
+ status = USB_FUNCTION_READSHRT; /* Short Packet receive */
+ }
+ }
+ }
+ }
+
+ if (count == 0) /* 0 length packet */
+ {
+ if (RZA_IO_RegRead_16(&g_usb1_function_pipecfg[pipe], USB_PIPECFG_BFRE_SHIFT, USB_PIPECFG_BFRE) == 0)
+ {
+ USB201.D1FIFOCTR = USB_FUNCTION_BITBCLR; /* Clear BCLR */
+ status = USB_FUNCTION_READZERO; /* Null Packet receive */
+ }
+ else
+ {
+ usb1_function_set_curpipe(pipe, USB_FUNCTION_D1DMA, DEVDRV_USBF_NO, mbw);
+ /* transaction counter No set */
+ /* FRDY = 1, DTLN = 0 -> BRDY */
+ }
+ }
+ else
+ {
+ dfacc = usb1_function_set_dfacc_d1(mbw, count);
+
+ if (mbw == USB_FUNCTION_BITMBW_32)
+ {
+ g_usb1_function_DmaInfo[USB_FUNCTION_D1FIFO].size = 2; /* 32bit transfer */
+ }
+ else if (mbw == USB_FUNCTION_BITMBW_16)
+ {
+ g_usb1_function_DmaInfo[USB_FUNCTION_D1FIFO].size = 1; /* 16bit transfer */
+ }
+ else
+ {
+ g_usb1_function_DmaInfo[USB_FUNCTION_D1FIFO].size = 0; /* 8bit transfer */
+ }
+
+ g_usb1_function_DmaPipe[USB_FUNCTION_D1FIFO] = pipe; /* not use in read operation */
+ g_usb1_function_DmaBval[USB_FUNCTION_D1FIFO] = 0; /* not use in read operation */
+
+ g_usb1_function_DmaInfo[USB_FUNCTION_D1FIFO].fifo = USB_FUNCTION_D1FIFO_DMA;
+ g_usb1_function_DmaInfo[USB_FUNCTION_D1FIFO].dir = USB_FUNCTION_FIFO2BUF;
+ g_usb1_function_DmaInfo[USB_FUNCTION_D1FIFO].buffer = (uint32_t)g_usb1_function_data_pointer[pipe];
+ g_usb1_function_DmaInfo[USB_FUNCTION_D1FIFO].bytes = count;
+
+ if (status == USB_FUNCTION_READING)
+ {
+ g_usb1_function_DmaStatus[USB_FUNCTION_D1FIFO] = USB_FUNCTION_DMA_BUSY;
+ }
+ else
+ {
+ g_usb1_function_DmaStatus[USB_FUNCTION_D1FIFO] = USB_FUNCTION_DMA_BUSYEND;
+ }
+
+ Userdef_USB_usb1_function_start_dma(&g_usb1_function_DmaInfo[USB_FUNCTION_D1FIFO], dfacc);
+
+ usb1_function_set_curpipe2(pipe, USB_FUNCTION_D1DMA, DEVDRV_USBF_NO, mbw, dfacc);
+
+ RZA_IO_RegWrite_16(&USB201.D1FIFOSEL,
+ 1,
+ USB_DnFIFOSEL_DREQE_SHIFT,
+ USB_DnFIFOSEL_DREQE);
+ }
+
+ if (RZA_IO_RegRead_16(&g_usb1_function_pipecfg[pipe], USB_PIPECFG_BFRE_SHIFT, USB_PIPECFG_BFRE) == 0)
+ {
+ g_usb1_function_data_count[pipe] -= count;
+ g_usb1_function_data_pointer[pipe] += count;
+ g_usb1_function_PipeDataSize[pipe] += count;
+ }
+
+ return status; /* End or Err or Continue */
+}
+
+/*******************************************************************************
+* Function Name: usb1_function_change_fifo_port
+* Description : Allocates FIF0 specified by the argument in the pipe assigned
+* : by the argument. After allocating FIF0, waits in the software
+* : till the corresponding pipe becomes ready.
+* Arguments : uint16_t pipe ; Pipe Number
+* : uint16_t fifosel ; Select FIFO
+* : uint16_t isel ; FIFO Access Direction
+* : uint16_t mbw ; FIFO Port Access Bit Width
+* Return Value : DEVDRV_USBF_FIFOERROR ; Error
+* : Others ; CFIFOCTR/D0FIFOCTR/D1FIFOCTR Register Value
+*******************************************************************************/
+uint16_t usb1_function_change_fifo_port (uint16_t pipe, uint16_t fifosel, uint16_t isel, uint16_t mbw)
+{
+ uint16_t buffer;
+ uint32_t loop;
+ volatile uint32_t loop2;
+
+ usb1_function_set_curpipe(pipe, fifosel, isel, mbw);
+
+ for (loop = 0; loop < 4; loop++)
+ {
+ switch (fifosel)
+ {
+ case USB_FUNCTION_CUSE:
+ buffer = USB201.CFIFOCTR;
+ break;
+
+ case USB_FUNCTION_D0USE:
+ case USB_FUNCTION_D0DMA:
+ buffer = USB201.D0FIFOCTR;
+ break;
+
+ case USB_FUNCTION_D1USE:
+ case USB_FUNCTION_D1DMA:
+ buffer = USB201.D1FIFOCTR;
+ break;
+
+ default:
+ buffer = 0;
+ break;
+ }
+
+ if ((buffer & USB_FUNCTION_BITFRDY) == USB_FUNCTION_BITFRDY)
+ {
+ return buffer;
+ }
+
+ loop2 = 25;
+ while (loop2-- > 0)
+ {
+ /* wait */
+ }
+ }
+
+ return DEVDRV_USBF_FIFOERROR;
+}
+
+/*******************************************************************************
+* Function Name: usb1_function_set_curpipe
+* Description : Allocates FIF0 specified by the argument in the pipe assigned
+* : by the argument.
+* Arguments : uint16_t pipe ; Pipe Number
+* : uint16_t fifosel ; Select FIFO
+* : uint16_t isel ; FIFO Access Direction
+* : uint16_t mbw ; FIFO Port Access Bit Width
+* Return Value : none
+*******************************************************************************/
+void usb1_function_set_curpipe (uint16_t pipe, uint16_t fifosel, uint16_t isel, uint16_t mbw)
+{
+ uint16_t buffer;
+ uint32_t loop;
+ volatile uint32_t loop2;
+
+ g_usb1_function_mbw[pipe] = mbw;
+
+ switch (fifosel)
+ {
+ case USB_FUNCTION_CUSE:
+ buffer = USB201.CFIFOSEL;
+ buffer &= (uint16_t)~(USB_FUNCTION_BITISEL | USB_FUNCTION_BITCURPIPE);
+ buffer |= (uint16_t)(~isel & USB_FUNCTION_BITISEL);
+ USB201.CFIFOSEL = buffer;
+
+ for (loop = 0; loop < 4; loop++)
+ {
+ if ((USB201.CFIFOSEL & (USB_FUNCTION_BITISEL | USB_FUNCTION_BITCURPIPE)) ==
+ (buffer & (USB_FUNCTION_BITISEL | USB_FUNCTION_BITCURPIPE)))
+ {
+ break;
+ }
+
+ loop2 = 100;
+
+ while (loop2-- > 0)
+ {
+ /* wait */
+ }
+ }
+ buffer &= (uint16_t)~(USB_FUNCTION_BITISEL | USB_FUNCTION_BITCURPIPE | USB_FUNCTION_BITMBW);
+ buffer |= (uint16_t)(isel | pipe | mbw);
+ USB201.CFIFOSEL = buffer;
+
+ for (loop = 0; loop < 4; loop++)
+ {
+ if ((USB201.CFIFOSEL & (USB_FUNCTION_BITISEL | USB_FUNCTION_BITCURPIPE)) ==
+ (buffer & (USB_FUNCTION_BITISEL | USB_FUNCTION_BITCURPIPE)))
+ {
+ break;
+ }
+
+ loop2 = 100;
+
+ while (loop2-- > 0)
+ {
+ /* wait */
+ }
+ }
+ break;
+
+ case USB_FUNCTION_D0DMA:
+ case USB_FUNCTION_D0USE:
+ buffer = USB201.D0FIFOSEL;
+ buffer &= (uint16_t)~(USB_FUNCTION_BITCURPIPE);
+ USB201.D0FIFOSEL = buffer;
+
+ for (loop = 0; loop < 4; loop++)
+ {
+ if ((USB201.D0FIFOSEL & USB_FUNCTION_BITCURPIPE) ==
+ (buffer & USB_FUNCTION_BITCURPIPE))
+ {
+ break;
+ }
+
+ loop2 = 100;
+
+ while (loop2-- > 0)
+ {
+ /* wait */
+ }
+ }
+ buffer &= (uint16_t)~(USB_FUNCTION_BITCURPIPE | USB_FUNCTION_BITMBW);
+ buffer |= (uint16_t)(pipe | mbw);
+ USB201.D0FIFOSEL = buffer;
+
+ for (loop = 0; loop < 4; loop++)
+ {
+ if ((USB201.D0FIFOSEL & USB_FUNCTION_BITCURPIPE) ==
+ (buffer & USB_FUNCTION_BITCURPIPE))
+ {
+ break;
+ }
+
+ loop2 = 100;
+ while (loop2-- > 0)
+ {
+ /* wait */
+ }
+ }
+ break;
+
+ case USB_FUNCTION_D1DMA:
+ case USB_FUNCTION_D1USE:
+ buffer = USB201.D1FIFOSEL;
+ buffer &= (uint16_t)~(USB_FUNCTION_BITCURPIPE);
+ USB201.D1FIFOSEL = buffer;
+
+ for (loop = 0; loop < 4; loop++)
+ {
+ if ((USB201.D1FIFOSEL & USB_FUNCTION_BITCURPIPE) ==
+ (buffer & USB_FUNCTION_BITCURPIPE))
+ {
+ break;
+ }
+
+ loop2 = 100;
+
+ while (loop2-- > 0)
+ {
+ /* wait */
+ }
+ }
+ buffer &= (uint16_t)~(USB_FUNCTION_BITCURPIPE | USB_FUNCTION_BITMBW);
+ buffer |= (uint16_t)(pipe | mbw);
+ USB201.D1FIFOSEL = buffer;
+
+ for (loop = 0; loop < 4; loop++)
+ {
+ if ((USB201.D1FIFOSEL & USB_FUNCTION_BITCURPIPE) ==
+ (buffer & USB_FUNCTION_BITCURPIPE))
+ {
+ break;
+ }
+
+ loop2 = 100;
+
+ while (loop2-- > 0)
+ {
+ /* wait */
+ }
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Cautions !!!
+ * Depending on the external bus speed of CPU, you may need to wait for 450ns here.
+ * For details, please look at the data sheet. */
+ loop2 = 100;
+
+ while (loop2-- > 0)
+ {
+ /* wait */
+ }
+}
+
+/*******************************************************************************
+* Function Name: usb1_function_set_curpipe2
+* Description : Allocates FIF0 specified by the argument in the pipe assigned
+* : by the argument.
+* Arguments : uint16_t pipe ; Pipe Number
+* : uint16_t fifosel ; Select FIFO
+* : uint16_t isel ; FIFO Access Direction
+* : uint16_t mbw ; FIFO Port Access Bit Width
+* : uint16_t dfacc ; DFACC Access mode
+* Return Value : none
+*******************************************************************************/
+void usb1_function_set_curpipe2 (uint16_t pipe, uint16_t fifosel, uint16_t isel, uint16_t mbw, uint16_t dfacc)
+{
+ uint16_t buffer;
+ uint32_t loop;
+#ifdef __USB_FUNCTION_DF_ACC_ENABLE__
+ uint32_t dummy;
+#endif
+ volatile uint32_t loop2;
+
+ g_usb1_function_mbw[pipe] = mbw;
+
+ switch (fifosel)
+ {
+ case USB_FUNCTION_CUSE:
+ buffer = USB201.CFIFOSEL;
+ buffer &= (uint16_t)~(USB_FUNCTION_BITISEL | USB_FUNCTION_BITCURPIPE);
+ buffer |= (uint16_t)(~isel & USB_FUNCTION_BITISEL);
+ USB201.CFIFOSEL = buffer;
+
+ for (loop = 0; loop < 4; loop++)
+ {
+ if ((USB201.CFIFOSEL & (USB_FUNCTION_BITISEL | USB_FUNCTION_BITCURPIPE)) ==
+ (buffer & (USB_FUNCTION_BITISEL | USB_FUNCTION_BITCURPIPE)))
+ {
+ break;
+ }
+
+ loop2 = 100;
+ while (loop2-- > 0)
+ {
+ /* wait */
+ }
+ }
+ buffer &= (uint16_t)~(USB_FUNCTION_BITISEL | USB_FUNCTION_BITCURPIPE | USB_FUNCTION_BITMBW);
+ buffer |= (uint16_t)(isel | pipe | mbw);
+ USB201.CFIFOSEL = buffer;
+
+ for (loop = 0; loop < 4; loop++)
+ {
+ if ((USB201.CFIFOSEL & (USB_FUNCTION_BITISEL | USB_FUNCTION_BITCURPIPE)) ==
+ (buffer & (USB_FUNCTION_BITISEL | USB_FUNCTION_BITCURPIPE)))
+ {
+ break;
+ }
+
+ loop2 = 100;
+
+ while (loop2-- > 0)
+ {
+ /* wait */
+ }
+ }
+ break;
+
+ case USB_FUNCTION_D0DMA:
+ case USB_FUNCTION_D0USE:
+ buffer = USB201.D0FIFOSEL;
+#ifdef __USB_FUNCTION_DF_ACC_ENABLE__
+ buffer &= (uint16_t)~(USB_FUNCTION_BITCURPIPE | USB_FUNCTION_BITMBW);
+
+ if (dfacc != 0)
+ {
+ buffer |= (uint16_t)(USB_FUNCTION_BITMBW_32);
+ }
+#else
+ buffer &= (uint16_t)~(USB_FUNCTION_BITCURPIPE);
+#endif
+ USB201.D0FIFOSEL = buffer;
+
+ for (loop = 0; loop < 4; loop++)
+ {
+ if ((USB201.D0FIFOSEL & USB_FUNCTION_BITCURPIPE) == (buffer & USB_FUNCTION_BITCURPIPE))
+ {
+ break;
+ }
+
+ loop2 = 100;
+
+ while (loop2-- > 0)
+ {
+ /* wait */
+ }
+ }
+
+#ifdef __USB_FUNCTION_DF_ACC_ENABLE__
+ if (dfacc != 0)
+ {
+ dummy = USB201.D0FIFO.UINT32;
+ }
+#endif
+ buffer &= (uint16_t)~(USB_FUNCTION_BITCURPIPE | USB_FUNCTION_BITMBW);
+ buffer |= (uint16_t)(pipe | mbw);
+ USB201.D0FIFOSEL = buffer;
+
+ for (loop = 0; loop < 4; loop++)
+ {
+ if ((USB201.D0FIFOSEL & USB_FUNCTION_BITCURPIPE) == (buffer & USB_FUNCTION_BITCURPIPE))
+ {
+ break;
+ }
+
+ loop2 = 100;
+
+ while (loop2-- > 0)
+ {
+ /* wait */
+ }
+ }
+ break;
+
+ case USB_FUNCTION_D1DMA:
+ case USB_FUNCTION_D1USE:
+ buffer = USB201.D1FIFOSEL;
+#ifdef __USB_FUNCTION_DF_ACC_ENABLE__
+ buffer &= (uint16_t)~(USB_FUNCTION_BITCURPIPE | USB_FUNCTION_BITMBW);
+
+ if (dfacc != 0)
+ {
+ buffer |= (uint16_t)(USB_FUNCTION_BITMBW_32);
+ }
+#else
+ buffer &= (uint16_t)~(USB_FUNCTION_BITCURPIPE);
+#endif
+ USB201.D1FIFOSEL = buffer;
+
+ for (loop = 0; loop < 4; loop++)
+ {
+ if ((USB201.D1FIFOSEL & USB_FUNCTION_BITCURPIPE) == (buffer & USB_FUNCTION_BITCURPIPE))
+ {
+ break;
+ }
+
+ loop2 = 100;
+
+ while (loop2-- > 0)
+ {
+ /* wait */
+ }
+ }
+#ifdef __USB_FUNCTION_DF_ACC_ENABLE__
+ if (dfacc != 0)
+ {
+ dummy = USB201.D1FIFO.UINT32;
+ loop = dummy; // avoid warning.
+ }
+#endif
+ buffer &= (uint16_t)~(USB_FUNCTION_BITCURPIPE | USB_FUNCTION_BITMBW);
+ buffer |= (uint16_t)(pipe | mbw);
+ USB201.D1FIFOSEL = buffer;
+
+ for (loop = 0; loop < 4; loop++)
+ {
+ if ((USB201.D1FIFOSEL & USB_FUNCTION_BITCURPIPE) == (buffer & USB_FUNCTION_BITCURPIPE))
+ {
+ break;
+ }
+
+ loop2 = 100;
+
+ while (loop2-- > 0)
+ {
+ /* wait */
+ }
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Cautions !!!
+ * Depending on the external bus speed of CPU, you may need to wait for 450ns here.
+ * For details, please look at the data sheet. */
+ loop2 = 100;
+
+ while (loop2-- > 0)
+ {
+ /* wait */
+ }
+}
+
+/*******************************************************************************
+* Function Name: usb1_function_write_c_fifo
+* Description : Writes data in CFIFO.
+* : Writes data by BYTE/WORD/LONG according to access size
+* : to the pipe specified by the arguments.
+* : Before executing this function, allocating CFIF0 in the specified pipe
+* : should be completed.
+* : Before executing this function, access size to the specified pipe
+* : should be fixed and set in g_usb1_function_mbw[].
+* Arguments : uint16_t pipe ; Pipe Number
+* : uint16_t count ; Data Size(Byte)
+* Return Value : none
+*******************************************************************************/
+static void usb1_function_write_c_fifo (uint16_t pipe, uint16_t count)
+{
+ uint16_t even;
+
+ if (g_usb1_function_mbw[pipe] == USB_FUNCTION_BITMBW_8)
+ {
+ for (even = count; even; --even)
+ {
+ USB201.CFIFO.UINT8[HH] = *g_usb1_function_data_pointer[pipe];
+ g_usb1_function_data_pointer[pipe] += 1;
+ }
+ }
+ else if (g_usb1_function_mbw[pipe] == USB_FUNCTION_BITMBW_16)
+ {
+ for (even = (uint16_t)(count / 2); even; --even)
+ {
+ USB201.CFIFO.UINT16[H] = *((uint16_t *)g_usb1_function_data_pointer[pipe]);
+ g_usb1_function_data_pointer[pipe] += 2;
+ }
+ }
+ else
+ {
+ for (even = (uint16_t)(count / 4); even; --even)
+ {
+ USB201.CFIFO.UINT32 = *((uint32_t *)g_usb1_function_data_pointer[pipe]);
+ g_usb1_function_data_pointer[pipe] += 4;
+ }
+ }
+}
+
+/*******************************************************************************
+* Function Name: usb1_function_read_c_fifo
+* Description : Reads data from CFIFO.
+* : Reads data by BYTE/WORD/LONG according to access size
+* : to the pipe specified by the arguments.
+* : Before executing this function, allocating CFIF0 in the specified pipe
+* : should be completed.
+* : Before executing this function, access size to the specified pipe
+* : should be fixed and set in g_usb1_function_mbw[].
+* Arguments : uint16_t pipe ; Pipe Number
+* : uint16_t count ; Data Size(Byte)
+* Return Value : none
+*******************************************************************************/
+static void usb1_function_read_c_fifo (uint16_t pipe, uint16_t count)
+{
+ uint16_t even;
+
+ if (g_usb1_function_mbw[pipe] == USB_FUNCTION_BITMBW_8)
+ {
+ for (even = count; even; --even)
+ {
+ *g_usb1_function_data_pointer[pipe] = USB201.CFIFO.UINT8[HH];
+ g_usb1_function_data_pointer[pipe] += 1;
+ }
+ }
+ else if (g_usb1_function_mbw[pipe] == USB_FUNCTION_BITMBW_16)
+ {
+ for (even = (uint16_t)((count + 1) / 2); even; --even)
+ {
+ *((uint16_t *)g_usb1_function_data_pointer[pipe]) = USB201.CFIFO.UINT16[H];
+ g_usb1_function_data_pointer[pipe] += 2;
+ }
+ }
+ else
+ {
+ for (even = (uint16_t)((count + 3) / 4); even; --even)
+ {
+ *((uint32_t *)g_usb1_function_data_pointer[pipe]) = USB201.CFIFO.UINT32;
+ g_usb1_function_data_pointer[pipe] += 4;
+ }
+ }
+}
+
+/*******************************************************************************
+* Function Name: usb1_function_write_d0_fifo
+* Description : Writes data in D0FIFO.
+* : Writes data by BYTE/WORD/LONG according to access size
+* : to the pipe specified by the arguments.
+* : Before executing this function, allocating CFIF0 in the specified pipe
+* : should be completed.
+* : Before executing this function, access size to the specified pipe
+* : should be fixed and set in g_usb1_function_mbw[].
+* Arguments : uint16_t pipe ; Pipe Number
+* : uint16_t count ; Data Size(Byte)
+* Return Value : none
+*******************************************************************************/
+static void usb1_function_write_d0_fifo (uint16_t pipe, uint16_t count)
+{
+ uint16_t even;
+
+ if (g_usb1_function_mbw[pipe] == USB_FUNCTION_BITMBW_8)
+ {
+ for (even = count; even; --even)
+ {
+ USB201.D0FIFO.UINT8[HH] = *g_usb1_function_data_pointer[pipe];
+ g_usb1_function_data_pointer[pipe] += 1;
+ }
+ }
+ else if (g_usb1_function_mbw[pipe] == USB_FUNCTION_BITMBW_16)
+ {
+ for (even = (uint16_t)(count / 2); even; --even)
+ {
+ USB201.D0FIFO.UINT16[H] = *((uint16_t *)g_usb1_function_data_pointer[pipe]);
+ g_usb1_function_data_pointer[pipe] += 2;
+ }
+ }
+ else
+ {
+ for (even = (uint16_t)(count / 4); even; --even)
+ {
+ USB201.D0FIFO.UINT32 = *((uint32_t *)g_usb1_function_data_pointer[pipe]);
+ g_usb1_function_data_pointer[pipe] += 4;
+ }
+ }
+}
+
+/*******************************************************************************
+* Function Name: usb1_function_read_d0_fifo
+* Description : Reads data from D0FIFO.
+* : Reads data by BYTE/WORD/LONG according to access size
+* : to the pipe specified by the arguments.
+* : Before executing this function, allocating DOFIF0 in the specified pipe
+* : should be completed.
+* : Before executing this function, access size to the specified pipe
+* : should be fixed and set in g_usb1_function_mbw[].
+* Arguments : uint16_t pipe ; Pipe Number
+* : uint16_t count ; Data Size(Byte)
+* Return Value : none
+*******************************************************************************/
+static void usb1_function_read_d0_fifo (uint16_t pipe, uint16_t count)
+{
+ uint16_t even;
+
+ if (g_usb1_function_mbw[pipe] == USB_FUNCTION_BITMBW_8)
+ {
+ for (even = count; even; --even)
+ {
+ *g_usb1_function_data_pointer[pipe] = USB201.D0FIFO.UINT8[HH];
+ g_usb1_function_data_pointer[pipe] += 1;
+ }
+ }
+ else if (g_usb1_function_mbw[pipe] == USB_FUNCTION_BITMBW_16)
+ {
+ for (even = (uint16_t)((count + 1) / 2); even; --even)
+ {
+ *((uint16_t *)g_usb1_function_data_pointer[pipe]) = USB201.D0FIFO.UINT16[H];
+ g_usb1_function_data_pointer[pipe] += 2;
+ }
+ }
+ else
+ {
+ for (even = (uint16_t)((count + 3) / 4); even; --even)
+ {
+ *((uint32_t *)g_usb1_function_data_pointer[pipe]) = USB201.D0FIFO.UINT32;
+ g_usb1_function_data_pointer[pipe] += 4;
+ }
+ }
+}
+
+/*******************************************************************************
+* Function Name: usb1_function_write_d1_fifo
+* Description : Writes data in D1FIFO.
+* : Writes data by BYTE/WORD/LONG according to access size
+* : to the pipe specified by the arguments.
+* : Before executing this function, allocating D1FIF0 in the specified pipe
+* : should be completed.
+* : Before executing this function, access size to the specified pipe
+* : should be fixed and set in g_usb1_function_mbw[].
+* Arguments : uint16_t pipe ; Pipe Number
+* : uint16_t count ; Data Size(Byte)
+* Return Value : none
+*******************************************************************************/
+static void usb1_function_write_d1_fifo (uint16_t pipe, uint16_t count)
+{
+ uint16_t even;
+
+ if (g_usb1_function_mbw[pipe] == USB_FUNCTION_BITMBW_8)
+ {
+ for (even = count; even; --even)
+ {
+ USB201.D1FIFO.UINT8[HH] = *g_usb1_function_data_pointer[pipe];
+ g_usb1_function_data_pointer[pipe] += 1;
+ }
+ }
+ else if (g_usb1_function_mbw[pipe] == USB_FUNCTION_BITMBW_16)
+ {
+ for (even = (uint16_t)(count / 2); even; --even)
+ {
+ USB201.D1FIFO.UINT16[H] = *((uint16_t *)g_usb1_function_data_pointer[pipe]);
+ g_usb1_function_data_pointer[pipe] += 2;
+ }
+ }
+ else
+ {
+ for (even = (uint16_t)(count / 4); even; --even)
+ {
+ USB201.D1FIFO.UINT32 = *((uint32_t *)g_usb1_function_data_pointer[pipe]);
+ g_usb1_function_data_pointer[pipe] += 4;
+ }
+ }
+}
+
+/*******************************************************************************
+* Function Name: usb1_function_read_d1_fifo
+* Description : Reads data from D1FIFO.
+* : Reads data by BYTE/WORD/LONG according to access size
+* : to the pipe specified by the arguments.
+* : Before executing this function, allocating D1FIF0 in the specified pipe
+* : should be completed.
+* : Before executing this function, access size to the specified pipe
+* : should be fixed and set in g_usb1_function_mbw[].
+* Arguments : uint16_t pipe ; Pipe Number
+* : uint16_t count ; Data Size(Byte)
+* Return Value : none
+*******************************************************************************/
+static void usb1_function_read_d1_fifo (uint16_t pipe, uint16_t count)
+{
+ uint16_t even;
+
+ if (g_usb1_function_mbw[pipe] == USB_FUNCTION_BITMBW_8)
+ {
+ for (even = count; even; --even)
+ {
+ *g_usb1_function_data_pointer[pipe] = USB201.D1FIFO.UINT8[HH];
+ g_usb1_function_data_pointer[pipe] += 1;
+ }
+ }
+ else if (g_usb1_function_mbw[pipe] == USB_FUNCTION_BITMBW_16)
+ {
+ for (even = (uint16_t)((count + 1) / 2); even; --even)
+ {
+ *((uint16_t *)g_usb1_function_data_pointer[pipe]) = USB201.D1FIFO.UINT16[H];
+ g_usb1_function_data_pointer[pipe] += 2;
+ }
+ }
+ else
+ {
+ for (even = (uint16_t)((count + 3) / 4); even; --even)
+ {
+ *((uint32_t *)g_usb1_function_data_pointer[pipe]) = USB201.D1FIFO.UINT32;
+ g_usb1_function_data_pointer[pipe] += 4;
+ }
+ }
+}
+
+/*******************************************************************************
+* Function Name: usb1_function_com_get_dmasize
+* Description : Calculates access width of DMA transfer by the argument to
+* : return as the Return Value.
+* Arguments : uint32_t trncount : transfer byte
+* : uint32_t dtptr : transfer data pointer
+* Return Value : DMA transfer size : 0 8bit
+* : : 1 16bit
+* : : 2 32bit
+*******************************************************************************/
+static uint32_t usb1_function_com_get_dmasize (uint32_t trncount, uint32_t dtptr)
+{
+ uint32_t size;
+
+ if (((trncount & 0x0001) != 0) || ((dtptr & 0x00000001) != 0))
+ {
+ /* When transfer byte count is odd */
+ /* or transfer data area is 8-bit alignment */
+ size = 0; /* 8bit */
+ }
+ else if (((trncount & 0x0003) != 0) || ((dtptr & 0x00000003) != 0))
+ {
+ /* When the transfer byte count is multiples of 2 */
+ /* or the transfer data area is 16-bit alignment */
+ size = 1; /* 16bit */
+ }
+ else
+ {
+ /* When the transfer byte count is multiples of 4 */
+ /* or the transfer data area is 32-bit alignment */
+ size = 2; /* 32bit */
+ }
+
+ return size;
+}
+
+/*******************************************************************************
+* Function Name: usb1_function_get_mbw
+* Description : Calculates access width of DMA to return the value set in MBW.
+* Arguments : uint32_t trncount : transfer byte
+* : uint32_t dtptr : transfer data pointer
+* Return Value : FIFO transfer size : USB_FUNCTION_BITMBW_8 8bit
+* : : USB_FUNCTION_BITMBW_16 16bit
+* : : USB_FUNCTION_BITMBW_32 32bit
+*******************************************************************************/
+uint16_t usb1_function_get_mbw (uint32_t trncount, uint32_t dtptr)
+{
+ uint32_t size;
+ uint16_t mbw;
+
+ size = usb1_function_com_get_dmasize(trncount, dtptr);
+
+ if (size == 0)
+ {
+ /* 8bit */
+ mbw = USB_FUNCTION_BITMBW_8;
+ }
+ else if (size == 1)
+ {
+ /* 16bit */
+ mbw = USB_FUNCTION_BITMBW_16;
+ }
+ else
+ {
+ /* 32bit */
+ mbw = USB_FUNCTION_BITMBW_32;
+ }
+
+ return mbw;
+}
+
+/*******************************************************************************
+* Function Name: usb1_function_set_transaction_counter
+* Description : Sets transaction counter by the argument(PIPEnTRN).
+* : Clears transaction before setting to enable transaction counter setting.
+* Arguments : uint16_t pipe ; Pipe number
+* : uint32_t bsize : Data transfer size
+* Return Value : none
+*******************************************************************************/
+static void usb1_function_set_transaction_counter (uint16_t pipe, uint32_t bsize)
+{
+ uint16_t mxps;
+ uint16_t cnt;
+
+ if (bsize == 0)
+ {
+ return;
+ }
+
+ mxps = usb1_function_get_mxps(pipe); /* Max Packet Size */
+
+ if ((bsize % mxps) == 0)
+ {
+ cnt = (uint16_t)(bsize / mxps);
+ }
+ else
+ {
+ cnt = (uint16_t)((bsize / mxps) + 1);
+ }
+
+ switch (pipe)
+ {
+ case USB_FUNCTION_PIPE1:
+ RZA_IO_RegWrite_16(&USB201.PIPE1TRE,
+ 1,
+ USB_PIPEnTRE_TRCLR_SHIFT,
+ USB_PIPEnTRE_TRCLR);
+ USB201.PIPE1TRN = cnt;
+ RZA_IO_RegWrite_16(&USB201.PIPE1TRE,
+ 1,
+ USB_PIPEnTRE_TRENB_SHIFT,
+ USB_PIPEnTRE_TRENB);
+ break;
+
+ case USB_FUNCTION_PIPE2:
+ RZA_IO_RegWrite_16(&USB201.PIPE2TRE,
+ 1,
+ USB_PIPEnTRE_TRCLR_SHIFT,
+ USB_PIPEnTRE_TRCLR);
+ USB201.PIPE2TRN = cnt;
+ RZA_IO_RegWrite_16(&USB201.PIPE2TRE,
+ 1,
+ USB_PIPEnTRE_TRENB_SHIFT,
+ USB_PIPEnTRE_TRENB);
+ break;
+
+ case USB_FUNCTION_PIPE3:
+ RZA_IO_RegWrite_16(&USB201.PIPE3TRE,
+ 1,
+ USB_PIPEnTRE_TRCLR_SHIFT,
+ USB_PIPEnTRE_TRCLR);
+ USB201.PIPE3TRN = cnt;
+ RZA_IO_RegWrite_16(&USB201.PIPE3TRE,
+ 1,
+ USB_PIPEnTRE_TRENB_SHIFT,
+ USB_PIPEnTRE_TRENB);
+ break;
+
+ case USB_FUNCTION_PIPE4:
+ RZA_IO_RegWrite_16(&USB201.PIPE4TRE,
+ 1,
+ USB_PIPEnTRE_TRCLR_SHIFT,
+ USB_PIPEnTRE_TRCLR);
+ USB201.PIPE4TRN = cnt;
+ RZA_IO_RegWrite_16(&USB201.PIPE4TRE,
+ 1,
+ USB_PIPEnTRE_TRENB_SHIFT,
+ USB_PIPEnTRE_TRENB);
+ break;
+
+ case USB_FUNCTION_PIPE5:
+ RZA_IO_RegWrite_16(&USB201.PIPE5TRE,
+ 1,
+ USB_PIPEnTRE_TRCLR_SHIFT,
+ USB_PIPEnTRE_TRCLR);
+ USB201.PIPE5TRN = cnt;
+ RZA_IO_RegWrite_16(&USB201.PIPE5TRE,
+ 1,
+ USB_PIPEnTRE_TRENB_SHIFT,
+ USB_PIPEnTRE_TRENB);
+ break;
+
+ case USB_FUNCTION_PIPE9:
+ RZA_IO_RegWrite_16(&USB201.PIPE9TRE,
+ 1,
+ USB_PIPEnTRE_TRCLR_SHIFT,
+ USB_PIPEnTRE_TRCLR);
+ USB201.PIPE9TRN = cnt;
+ RZA_IO_RegWrite_16(&USB201.PIPE9TRE,
+ 1,
+ USB_PIPEnTRE_TRENB_SHIFT,
+ USB_PIPEnTRE_TRENB);
+ break;
+
+ case USB_FUNCTION_PIPEA:
+ RZA_IO_RegWrite_16(&USB201.PIPEATRE,
+ 1,
+ USB_PIPEnTRE_TRCLR_SHIFT,
+ USB_PIPEnTRE_TRCLR);
+ USB201.PIPEATRN = cnt;
+ RZA_IO_RegWrite_16(&USB201.PIPEATRE,
+ 1,
+ USB_PIPEnTRE_TRENB_SHIFT,
+ USB_PIPEnTRE_TRENB);
+ break;
+
+ case USB_FUNCTION_PIPEB:
+ RZA_IO_RegWrite_16(&USB201.PIPEBTRE,
+ 1,
+ USB_PIPEnTRE_TRCLR_SHIFT,
+ USB_PIPEnTRE_TRCLR);
+ USB201.PIPEBTRN = cnt;
+ RZA_IO_RegWrite_16(&USB201.PIPEBTRE,
+ 1,
+ USB_PIPEnTRE_TRENB_SHIFT,
+ USB_PIPEnTRE_TRENB);
+ break;
+
+ case USB_FUNCTION_PIPEC:
+ RZA_IO_RegWrite_16(&USB201.PIPECTRE,
+ 1,
+ USB_PIPEnTRE_TRCLR_SHIFT,
+ USB_PIPEnTRE_TRCLR);
+ USB201.PIPECTRN = cnt;
+ RZA_IO_RegWrite_16(&USB201.PIPECTRE,
+ 1,
+ USB_PIPEnTRE_TRENB_SHIFT,
+ USB_PIPEnTRE_TRENB);
+ break;
+
+ case USB_FUNCTION_PIPED:
+ RZA_IO_RegWrite_16(&USB201.PIPEDTRE,
+ 1,
+ USB_PIPEnTRE_TRCLR_SHIFT,
+ USB_PIPEnTRE_TRCLR);
+ USB201.PIPEDTRN = cnt;
+ RZA_IO_RegWrite_16(&USB201.PIPEDTRE,
+ 1,
+ USB_PIPEnTRE_TRENB_SHIFT,
+ USB_PIPEnTRE_TRENB);
+ break;
+
+ case USB_FUNCTION_PIPEE:
+ RZA_IO_RegWrite_16(&USB201.PIPEETRE,
+ 1,
+ USB_PIPEnTRE_TRCLR_SHIFT,
+ USB_PIPEnTRE_TRCLR);
+ USB201.PIPEETRN = cnt;
+ RZA_IO_RegWrite_16(&USB201.PIPEETRE,
+ 1,
+ USB_PIPEnTRE_TRENB_SHIFT,
+ USB_PIPEnTRE_TRENB);
+ break;
+
+ case USB_FUNCTION_PIPEF:
+ RZA_IO_RegWrite_16(&USB201.PIPEFTRE,
+ 1,
+ USB_PIPEnTRE_TRCLR_SHIFT,
+ USB_PIPEnTRE_TRCLR);
+ USB201.PIPEFTRN = cnt;
+ RZA_IO_RegWrite_16(&USB201.PIPEFTRE,
+ 1,
+ USB_PIPEnTRE_TRENB_SHIFT,
+ USB_PIPEnTRE_TRENB);
+ break;
+
+ default:
+ break;
+ }
+}
+
+/*******************************************************************************
+* Function Name: usb1_function_clear_transaction_counter
+* Description : Clears the transaction counter by the argument.
+* : After executing this function, the transaction counter is invalid.
+* Arguments : uint16_t pipe ; Pipe number
+* Return Value : none
+*******************************************************************************/
+void usb1_function_clear_transaction_counter (uint16_t pipe)
+{
+ switch (pipe)
+ {
+ case USB_FUNCTION_PIPE1:
+ RZA_IO_RegWrite_16(&USB201.PIPE1TRE,
+ 0,
+ USB_PIPEnTRE_TRENB_SHIFT,
+ USB_PIPEnTRE_TRENB);
+ RZA_IO_RegWrite_16(&USB201.PIPE1TRE,
+ 1,
+ USB_PIPEnTRE_TRCLR_SHIFT,
+ USB_PIPEnTRE_TRCLR);
+ break;
+
+ case USB_FUNCTION_PIPE2:
+ RZA_IO_RegWrite_16(&USB201.PIPE2TRE,
+ 0,
+ USB_PIPEnTRE_TRENB_SHIFT,
+ USB_PIPEnTRE_TRENB);
+ RZA_IO_RegWrite_16(&USB201.PIPE2TRE,
+ 1,
+ USB_PIPEnTRE_TRCLR_SHIFT,
+ USB_PIPEnTRE_TRCLR);
+ break;
+
+ case USB_FUNCTION_PIPE3:
+ RZA_IO_RegWrite_16(&USB201.PIPE3TRE,
+ 0,
+ USB_PIPEnTRE_TRENB_SHIFT,
+ USB_PIPEnTRE_TRENB);
+ RZA_IO_RegWrite_16(&USB201.PIPE3TRE,
+ 1,
+ USB_PIPEnTRE_TRCLR_SHIFT,
+ USB_PIPEnTRE_TRCLR);
+ break;
+
+ case USB_FUNCTION_PIPE4:
+ RZA_IO_RegWrite_16(&USB201.PIPE4TRE,
+ 0,
+ USB_PIPEnTRE_TRENB_SHIFT,
+ USB_PIPEnTRE_TRENB);
+ RZA_IO_RegWrite_16(&USB201.PIPE4TRE,
+ 1,
+ USB_PIPEnTRE_TRCLR_SHIFT,
+ USB_PIPEnTRE_TRCLR);
+ break;
+
+ case USB_FUNCTION_PIPE5:
+ RZA_IO_RegWrite_16(&USB201.PIPE5TRE,
+ 0,
+ USB_PIPEnTRE_TRENB_SHIFT,
+ USB_PIPEnTRE_TRENB);
+ RZA_IO_RegWrite_16(&USB201.PIPE5TRE,
+ 1,
+ USB_PIPEnTRE_TRCLR_SHIFT,
+ USB_PIPEnTRE_TRCLR);
+ break;
+
+ case USB_FUNCTION_PIPE9:
+ RZA_IO_RegWrite_16(&USB201.PIPE9TRE,
+ 0,
+ USB_PIPEnTRE_TRENB_SHIFT,
+ USB_PIPEnTRE_TRENB);
+ RZA_IO_RegWrite_16(&USB201.PIPE9TRE,
+ 1,
+ USB_PIPEnTRE_TRCLR_SHIFT,
+ USB_PIPEnTRE_TRCLR);
+ break;
+
+ case USB_FUNCTION_PIPEA:
+ RZA_IO_RegWrite_16(&USB201.PIPEATRE,
+ 0,
+ USB_PIPEnTRE_TRENB_SHIFT,
+ USB_PIPEnTRE_TRENB);
+ RZA_IO_RegWrite_16(&USB201.PIPEATRE,
+ 1,
+ USB_PIPEnTRE_TRCLR_SHIFT,
+ USB_PIPEnTRE_TRCLR);
+ break;
+
+ case USB_FUNCTION_PIPEB:
+ RZA_IO_RegWrite_16(&USB201.PIPEBTRE,
+ 0,
+ USB_PIPEnTRE_TRENB_SHIFT,
+ USB_PIPEnTRE_TRENB);
+ RZA_IO_RegWrite_16(&USB201.PIPEBTRE,
+ 1,
+ USB_PIPEnTRE_TRCLR_SHIFT,
+ USB_PIPEnTRE_TRCLR);
+ break;
+
+ case USB_FUNCTION_PIPEC:
+ RZA_IO_RegWrite_16(&USB201.PIPECTRE,
+ 0,
+ USB_PIPEnTRE_TRENB_SHIFT,
+ USB_PIPEnTRE_TRENB);
+ RZA_IO_RegWrite_16(&USB201.PIPECTRE,
+ 1,
+ USB_PIPEnTRE_TRCLR_SHIFT,
+ USB_PIPEnTRE_TRCLR);
+ break;
+
+ case USB_FUNCTION_PIPED:
+ RZA_IO_RegWrite_16(&USB201.PIPEDTRE,
+ 0,
+ USB_PIPEnTRE_TRENB_SHIFT,
+ USB_PIPEnTRE_TRENB);
+ RZA_IO_RegWrite_16(&USB201.PIPEDTRE,
+ 1,
+ USB_PIPEnTRE_TRCLR_SHIFT,
+ USB_PIPEnTRE_TRCLR);
+ break;
+
+ case USB_FUNCTION_PIPEE:
+ RZA_IO_RegWrite_16(&USB201.PIPEETRE,
+ 0,
+ USB_PIPEnTRE_TRENB_SHIFT,
+ USB_PIPEnTRE_TRENB);
+ RZA_IO_RegWrite_16(&USB201.PIPEETRE,
+ 1,
+ USB_PIPEnTRE_TRCLR_SHIFT,
+ USB_PIPEnTRE_TRCLR);
+ break;
+
+ case USB_FUNCTION_PIPEF:
+ RZA_IO_RegWrite_16(&USB201.PIPEFTRE,
+ 0,
+ USB_PIPEnTRE_TRENB_SHIFT,
+ USB_PIPEnTRE_TRENB);
+ RZA_IO_RegWrite_16(&USB201.PIPEFTRE,
+ 1,
+ USB_PIPEnTRE_TRCLR_SHIFT,
+ USB_PIPEnTRE_TRCLR);
+ break;
+
+ default:
+ break;
+ }
+}
+
+/*******************************************************************************
+* Function Name: usb1_function_stop_transfer
+* Description : Stops the USB transfer in the pipe specified by the argument.
+* : After stopping the USB transfer, clears the buffer allocated in
+* : the pipe.
+* : After executing this function, allocation in FIF0 becomes USB_FUNCTION_PIPE0;
+* : invalid. After executing this function, BRDY/NRDY/BEMP interrupt
+* : in the corresponding pipe becomes invalid. Sequence bit is also
+* : cleared.
+* Arguments : uint16_t pipe ; Pipe Number
+* Return Value : none
+*******************************************************************************/
+void usb1_function_stop_transfer (uint16_t pipe)
+{
+ uint16_t usefifo;
+ uint32_t remain;
+ uint16_t fifo;
+
+ usb1_function_set_pid_nak(pipe);
+
+ usefifo = (uint16_t)(g_usb1_function_PipeTbl[pipe] & USB_FUNCTION_FIFO_USE);
+ switch (usefifo)
+ {
+ case USB_FUNCTION_D0FIFO_USE:
+ usb1_function_clear_transaction_counter(pipe);
+ USB201.D0FIFOCTR = USB_FUNCTION_BITBCLR; /* Buffer Clear */
+ fifo = USB_FUNCTION_D0USE;
+ break;
+
+ case USB_FUNCTION_D1FIFO_USE:
+ usb1_function_clear_transaction_counter(pipe);
+ USB201.D1FIFOCTR = USB_FUNCTION_BITBCLR; /* Buffer Clear */
+ fifo = USB_FUNCTION_D1USE;
+ break;
+
+ case USB_FUNCTION_D0FIFO_DMA:
+ remain = Userdef_USB_usb1_function_stop_dma0();
+ usb1_function_dma_stop_d0(pipe, remain);
+ usb1_function_clear_transaction_counter(pipe);
+ USB201.D0FIFOCTR = USB_FUNCTION_BITBCLR; /* Buffer Clear */
+ fifo = USB_FUNCTION_D0DMA;
+ break;
+
+ case USB_FUNCTION_D1FIFO_DMA:
+ remain = Userdef_USB_usb1_function_stop_dma1();
+ usb1_function_dma_stop_d1(pipe, remain);
+ usb1_function_clear_transaction_counter(pipe);
+ USB201.D1FIFOCTR = USB_FUNCTION_BITBCLR; /* Buffer Clear */
+ fifo = USB_FUNCTION_D1DMA;
+ break;
+
+ default:
+ usb1_function_clear_transaction_counter(pipe);
+ USB201.CFIFOCTR = USB_FUNCTION_BITBCLR; /* Buffer Clear */
+ fifo = USB_FUNCTION_CUSE;
+ break;
+ }
+
+ usb1_function_set_curpipe(USB_FUNCTION_PIPE0, fifo, DEVDRV_USBF_NO, USB_FUNCTION_BITMBW_16);
+
+ /* Interrupt of pipe set is disabled */
+ usb1_function_disable_brdy_int(pipe);
+ usb1_function_disable_nrdy_int(pipe);
+ usb1_function_disable_bemp_int(pipe);
+
+ usb1_function_aclrm(pipe);
+ usb1_function_set_csclr(pipe);
+
+ if ( g_usb1_function_pipe_status[pipe] == DEVDRV_USBF_PIPE_WAIT )
+ {
+ g_usb1_function_pipe_status[pipe] = DEVDRV_USBF_PIPE_NORES;
+ }
+}
+
+/*******************************************************************************
+* Function Name: usb1_function_set_dfacc_d0
+* Description : Sets the DFACC setting value in D0FIFO using the transfer size.
+* Arguments : uint16_t mbw ; MBW
+* : uint16_t count ; data count
+* Return Value : DFACC Access mode
+*******************************************************************************/
+static uint16_t usb1_function_set_dfacc_d0 (uint16_t mbw, uint32_t count)
+{
+ uint16_t dfacc = 0;
+
+#ifndef __USB_FUNCTION_DF_ACC_ENABLE__
+ RZA_IO_RegWrite_16(&USB201.D0FBCFG,
+ 0,
+ USB_DnFBCFG_DFACC_SHIFT,
+ USB_DnFBCFG_DFACC);
+ RZA_IO_RegWrite_16(&USB201.D0FBCFG,
+ 0,
+ USB_DnFBCFG_TENDE_SHIFT,
+ USB_DnFBCFG_TENDE);
+ dfacc = 0;
+#else
+ if (mbw == USB_FUNCTION_BITMBW_32)
+ {
+ if ((count % 32) == 0)
+ {
+ /* 32byte transfer */
+ RZA_IO_RegWrite_16(&USB201.D0FBCFG,
+ 2,
+ USB_DnFBCFG_DFACC_SHIFT,
+ USB_DnFBCFG_DFACC);
+ RZA_IO_RegWrite_16(&USB201.D0FBCFG,
+ 0,
+ USB_DnFBCFG_TENDE_SHIFT,
+ USB_DnFBCFG_TENDE);
+ dfacc = 2;
+ }
+ else if ((count % 16) == 0)
+ {
+ /* 16byte transfer */
+ RZA_IO_RegWrite_16(&USB201.D0FBCFG,
+ 1,
+ USB_DnFBCFG_DFACC_SHIFT,
+ USB_DnFBCFG_DFACC);
+ RZA_IO_RegWrite_16(&USB201.D0FBCFG,
+ 0,
+ USB_DnFBCFG_TENDE_SHIFT,
+ USB_DnFBCFG_TENDE);
+ dfacc = 1;
+ }
+ else
+ {
+ RZA_IO_RegWrite_16(&USB201.D0FBCFG,
+ 0,
+ USB_DnFBCFG_DFACC_SHIFT,
+ USB_DnFBCFG_DFACC);
+ RZA_IO_RegWrite_16(&USB201.D0FBCFG,
+ 0,
+ USB_DnFBCFG_TENDE_SHIFT,
+ USB_DnFBCFG_TENDE);
+ dfacc = 0;
+ }
+ }
+ else if (mbw == USB_FUNCTION_BITMBW_16)
+ {
+ RZA_IO_RegWrite_16(&USB201.D0FBCFG,
+ 0,
+ USB_DnFBCFG_DFACC_SHIFT,
+ USB_DnFBCFG_DFACC);
+ RZA_IO_RegWrite_16(&USB201.D0FBCFG,
+ 0,
+ USB_DnFBCFG_TENDE_SHIFT,
+ USB_DnFBCFG_TENDE);
+ dfacc = 0;
+ }
+ else
+ {
+ RZA_IO_RegWrite_16(&USB201.D0FBCFG,
+ 0,
+ USB_DnFBCFG_DFACC_SHIFT,
+ USB_DnFBCFG_DFACC);
+ RZA_IO_RegWrite_16(&USB201.D0FBCFG,
+ 0,
+ USB_DnFBCFG_TENDE_SHIFT,
+ USB_DnFBCFG_TENDE);
+ dfacc = 0;
+ }
+#endif
+ return dfacc;
+}
+
+/*******************************************************************************
+* Function Name: usb1_function_set_dfacc_d1
+* Description : Set the DFACC setting value in D1FIFO using the transfer size.
+* Arguments : uint16_t mbw ; MBW
+* : uint16_t count ; data count
+* Return Value : DFACC Access mode
+*******************************************************************************/
+static uint16_t usb1_function_set_dfacc_d1 (uint16_t mbw, uint32_t count)
+{
+ uint16_t dfacc = 0;
+
+#ifndef __USB_FUNCTION_DF_ACC_ENABLE__
+ RZA_IO_RegWrite_16(&USB201.D1FBCFG,
+ 0,
+ USB_DnFBCFG_DFACC_SHIFT,
+ USB_DnFBCFG_DFACC);
+ RZA_IO_RegWrite_16(&USB201.D1FBCFG,
+ 0,
+ USB_DnFBCFG_TENDE_SHIFT,
+ USB_DnFBCFG_TENDE);
+ dfacc = 0;
+#else
+ if (mbw == USB_FUNCTION_BITMBW_32)
+ {
+ if ((count % 32) == 0)
+ {
+ /* 32byte transfer */
+ RZA_IO_RegWrite_16(&USB201.D1FBCFG,
+ 2,
+ USB_DnFBCFG_DFACC_SHIFT,
+ USB_DnFBCFG_DFACC);
+ RZA_IO_RegWrite_16(&USB201.D1FBCFG,
+ 0,
+ USB_DnFBCFG_TENDE_SHIFT,
+ USB_DnFBCFG_TENDE);
+ dfacc = 2;
+ }
+ else if ((count % 16) == 0)
+ {
+ /* 16byte transfer */
+ RZA_IO_RegWrite_16(&USB201.D1FBCFG,
+ 1,
+ USB_DnFBCFG_DFACC_SHIFT,
+ USB_DnFBCFG_DFACC);
+ RZA_IO_RegWrite_16(&USB201.D1FBCFG,
+ 0,
+ USB_DnFBCFG_TENDE_SHIFT,
+ USB_DnFBCFG_TENDE);
+ dfacc = 1;
+ }
+ else
+ {
+ RZA_IO_RegWrite_16(&USB201.D1FBCFG,
+ 0,
+ USB_DnFBCFG_DFACC_SHIFT,
+ USB_DnFBCFG_DFACC);
+ RZA_IO_RegWrite_16(&USB201.D1FBCFG,
+ 0,
+ USB_DnFBCFG_TENDE_SHIFT,
+ USB_DnFBCFG_TENDE);
+ dfacc = 0;
+ }
+ }
+ else if (mbw == USB_FUNCTION_BITMBW_16)
+ {
+ RZA_IO_RegWrite_16(&USB201.D1FBCFG,
+ 0,
+ USB_DnFBCFG_DFACC_SHIFT,
+ USB_DnFBCFG_DFACC);
+ RZA_IO_RegWrite_16(&USB201.D1FBCFG,
+ 0,
+ USB_DnFBCFG_TENDE_SHIFT,
+ USB_DnFBCFG_TENDE);
+ dfacc = 0;
+ }
+ else
+ {
+ RZA_IO_RegWrite_16(&USB201.D1FBCFG,
+ 0,
+ USB_DnFBCFG_DFACC_SHIFT,
+ USB_DnFBCFG_DFACC);
+ RZA_IO_RegWrite_16(&USB201.D1FBCFG,
+ 0,
+ USB_DnFBCFG_TENDE_SHIFT,
+ USB_DnFBCFG_TENDE);
+ dfacc = 0;
+ }
+#endif
+
+ return dfacc;
+}
+
+/* End of File */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/USBDevice/TARGET_RENESAS/TARGET_VK_RZ_A1H/usb1/src/common/usb1_function_dma.c Fri Apr 29 01:16:25 2016 +0100
@@ -0,0 +1,346 @@
+/*******************************************************************************
+* DISCLAIMER
+* This software is supplied by Renesas Electronics Corporation and is only
+* intended for use with Renesas products. No other uses are authorized. This
+* software is owned by Renesas Electronics Corporation and is protected under
+* all applicable laws, including copyright laws.
+* THIS SOFTWARE IS PROVIDED "AS IS" AND RENESAS MAKES NO WARRANTIES REGARDING
+* THIS SOFTWARE, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING BUT NOT
+* LIMITED TO WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE
+* AND NON-INFRINGEMENT. ALL SUCH WARRANTIES ARE EXPRESSLY DISCLAIMED.
+* TO THE MAXIMUM EXTENT PERMITTED NOT PROHIBITED BY LAW, NEITHER RENESAS
+* ELECTRONICS CORPORATION NOR ANY OF ITS AFFILIATED COMPANIES SHALL BE LIABLE
+* FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR
+* ANY REASON RELATED TO THIS SOFTWARE, EVEN IF RENESAS OR ITS AFFILIATES HAVE
+* BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
+* Renesas reserves the right, without notice, to make changes to this software
+* and to discontinue the availability of this software. By using this software,
+* you agree to the additional terms and conditions found by accessing the
+* following link:
+* http://www.renesas.com/disclaimer
+* Copyright (C) 2012 - 2014 Renesas Electronics Corporation. All rights reserved.
+*******************************************************************************/
+/*******************************************************************************
+* File Name : usb1_function_dma.c
+* $Rev: 1116 $
+* $Date:: 2014-07-09 16:29:19 +0900#$
+* Device(s) : RZ/A1H
+* Tool-Chain :
+* OS : None
+* H/W Platform :
+* Description : RZ/A1H R7S72100 USB Sample Program
+* Operation :
+* Limitations :
+*******************************************************************************/
+
+
+/*******************************************************************************
+Includes <System Includes> , "Project Includes"
+*******************************************************************************/
+#include "usb1_function.h"
+
+
+/*******************************************************************************
+Typedef definitions
+*******************************************************************************/
+
+
+/*******************************************************************************
+Macro definitions
+*******************************************************************************/
+
+
+/*******************************************************************************
+Imported global variables and functions (from other files)
+*******************************************************************************/
+
+
+/*******************************************************************************
+Exported global variables and functions (to be accessed by other files)
+*******************************************************************************/
+
+
+/*******************************************************************************
+Private global variables and functions
+*******************************************************************************/
+static void usb1_function_dmaint(uint16_t fifo);
+static void usb1_function_dmaint_buf2fifo(uint16_t pipe);
+static void usb1_function_dmaint_fifo2buf(uint16_t pipe);
+
+
+/*******************************************************************************
+* Function Name: usb1_function_dma_stop_d0
+* Description : D0FIFO DMA stop
+* Arguments : uint16_t pipe : pipe number
+* : uint32_t remain : transfer byte
+* Return Value : none
+*******************************************************************************/
+void usb1_function_dma_stop_d0 (uint16_t pipe, uint32_t remain)
+{
+ uint16_t dtln;
+ uint16_t dfacc;
+ uint16_t buffer;
+ uint16_t sds_b = 1;
+
+ dfacc = RZA_IO_RegRead_16(&USB201.D0FBCFG, USB_DnFBCFG_DFACC_SHIFT, USB_DnFBCFG_DFACC);
+
+ if (dfacc == 2)
+ {
+ sds_b = 32;
+ }
+ else if (dfacc == 1)
+ {
+ sds_b = 16;
+ }
+ else
+ {
+ if (g_usb1_function_DmaInfo[USB_FUNCTION_D0FIFO].size == 2)
+ {
+ sds_b = 4;
+ }
+ else if (g_usb1_function_DmaInfo[USB_FUNCTION_D0FIFO].size == 1)
+ {
+ sds_b = 2;
+ }
+ else
+ {
+ sds_b = 1;
+ }
+ }
+
+ if (RZA_IO_RegRead_16(&g_usb1_function_pipecfg[pipe], USB_PIPECFG_BFRE_SHIFT, USB_PIPECFG_BFRE) == 1)
+ {
+ if (g_usb1_function_pipe_status[pipe] != DEVDRV_USBF_PIPE_DONE)
+ {
+ buffer = USB201.D0FIFOCTR;
+ dtln = (buffer & USB_FUNCTION_BITDTLN);
+
+ if ((dtln % sds_b) != 0)
+ {
+ remain += (sds_b - (dtln % sds_b));
+ }
+ g_usb1_function_PipeDataSize[pipe] = (g_usb1_function_data_count[pipe] - remain);
+ g_usb1_function_data_count[pipe] = remain;
+ }
+ }
+
+ RZA_IO_RegWrite_16(&USB201.D0FIFOSEL, 0, USB_DnFIFOSEL_DREQE_SHIFT, USB_DnFIFOSEL_DREQE);
+}
+
+/*******************************************************************************
+* Function Name: usb1_function_dma_stop_d1
+* Description : D1FIFO DMA stop
+* Arguments : uint16_t pipe : pipe number
+* : uint32_t remain : transfer byte
+* Return Value : none
+*******************************************************************************/
+void usb1_function_dma_stop_d1 (uint16_t pipe, uint32_t remain)
+{
+ uint16_t dtln;
+ uint16_t dfacc;
+ uint16_t buffer;
+ uint16_t sds_b = 1;
+
+ dfacc = RZA_IO_RegRead_16(&USB201.D1FBCFG, USB_DnFBCFG_DFACC_SHIFT, USB_DnFBCFG_DFACC);
+
+ if (dfacc == 2)
+ {
+ sds_b = 32;
+ }
+ else if (dfacc == 1)
+ {
+ sds_b = 16;
+ }
+ else
+ {
+ if (g_usb1_function_DmaInfo[USB_FUNCTION_D1FIFO].size == 2)
+ {
+ sds_b = 4;
+ }
+ else if (g_usb1_function_DmaInfo[USB_FUNCTION_D1FIFO].size == 1)
+ {
+ sds_b = 2;
+ }
+ else
+ {
+ sds_b = 1;
+ }
+ }
+
+ if (RZA_IO_RegRead_16(&g_usb1_function_pipecfg[pipe], USB_PIPECFG_BFRE_SHIFT, USB_PIPECFG_BFRE) == 1)
+ {
+ if (g_usb1_function_pipe_status[pipe] != DEVDRV_USBF_PIPE_DONE)
+ {
+ buffer = USB201.D1FIFOCTR;
+ dtln = (buffer & USB_FUNCTION_BITDTLN);
+
+ if ((dtln % sds_b) != 0)
+ {
+ remain += (sds_b - (dtln % sds_b));
+ }
+ g_usb1_function_PipeDataSize[pipe] = (g_usb1_function_data_count[pipe] - remain);
+ g_usb1_function_data_count[pipe] = remain;
+ }
+ }
+
+ RZA_IO_RegWrite_16(&USB201.D1FIFOSEL, 0, USB_DnFIFOSEL_DREQE_SHIFT, USB_DnFIFOSEL_DREQE);
+}
+
+/*******************************************************************************
+* Function Name: usb1_function_dma_interrupt_d0fifo
+* Description : This function is DMA interrupt handler entry.
+* : Execute usb1_function_dmaint() after disabling DMA interrupt in this function.
+* : Disable DMA interrupt to DMAC executed when USB_FUNCTION_D0FIFO_DMA is
+* : specified by dma->fifo.
+* : Register this function as DMA complete interrupt.
+* Arguments : uint32_t int_sense ; Interrupts detection mode
+* : ; INTC_LEVEL_SENSITIVE : Level sense
+* : ; INTC_EDGE_TRIGGER : Edge trigger
+* Return Value : none
+*******************************************************************************/
+void usb1_function_dma_interrupt_d0fifo (uint32_t int_sense)
+{
+ usb1_function_dmaint(USB_FUNCTION_D0FIFO);
+ g_usb1_function_DmaStatus[USB_FUNCTION_D0FIFO] = USB_FUNCTION_DMA_READY;
+}
+
+/*******************************************************************************
+* Function Name: usb1_function_dma_interrupt_d1fifo
+* Description : This function is DMA interrupt handler entry.
+* : Execute usb1_function_dmaint() after disabling DMA interrupt in this function.
+* : Disable DMA interrupt to DMAC executed when USB_FUNCTION_D1FIFO_DMA is
+* : specified by dma->fifo.
+* : Register this function as DMA complete interrupt.
+* Arguments : uint32_t int_sense ; Interrupts detection mode
+* : ; INTC_LEVEL_SENSITIVE : Level sense
+* : ; INTC_EDGE_TRIGGER : Edge trigger
+* Return Value : none
+*******************************************************************************/
+void usb1_function_dma_interrupt_d1fifo (uint32_t int_sense)
+{
+ usb1_function_dmaint(USB_FUNCTION_D1FIFO);
+ g_usb1_function_DmaStatus[USB_FUNCTION_D1FIFO] = USB_FUNCTION_DMA_READY;
+}
+
+/*******************************************************************************
+* Function Name: usb1_function_dmaint
+* Description : This function is DMA transfer end interrupt
+* Arguments : uint16_t fifo ; fifo number
+* : ; USB_FUNCTION_D0FIFO
+* : ; USB_FUNCTION_D1FIFO
+* Return Value : none
+*******************************************************************************/
+static void usb1_function_dmaint (uint16_t fifo)
+{
+ uint16_t pipe;
+
+ pipe = g_usb1_function_DmaPipe[fifo];
+
+ if (g_usb1_function_DmaInfo[fifo].dir == USB_FUNCTION_BUF2FIFO)
+ {
+ usb1_function_dmaint_buf2fifo(pipe);
+ }
+ else
+ {
+ usb1_function_dmaint_fifo2buf(pipe);
+ }
+}
+
+/*******************************************************************************
+* Function Name: usb1_function_dmaint_fifo2buf
+* Description : Executes read completion from FIFO by DMAC.
+* Arguments : uint16_t pipe : pipe number
+* Return Value : none
+*******************************************************************************/
+static void usb1_function_dmaint_fifo2buf (uint16_t pipe)
+{
+ uint32_t remain;
+ uint16_t useport;
+
+ if (g_usb1_function_pipe_status[pipe] != DEVDRV_USBF_PIPE_DONE)
+ {
+ useport = (uint16_t)(g_usb1_function_PipeTbl[pipe] & USB_FUNCTION_FIFO_USE);
+
+ if (useport == USB_FUNCTION_D0FIFO_DMA)
+ {
+ remain = Userdef_USB_usb1_function_stop_dma0();
+ usb1_function_dma_stop_d0(pipe, remain);
+
+ if (RZA_IO_RegRead_16(&g_usb1_function_pipecfg[pipe], USB_PIPECFG_BFRE_SHIFT, USB_PIPECFG_BFRE) == 0)
+ {
+ if (g_usb1_function_DmaStatus[USB_FUNCTION_D0FIFO] == USB_FUNCTION_DMA_BUSYEND)
+ {
+ USB201.D0FIFOCTR = USB_FUNCTION_BITBCLR;
+ g_usb1_function_pipe_status[pipe] = DEVDRV_USBF_PIPE_DONE;
+ }
+ else
+ {
+ usb1_function_enable_brdy_int(pipe);
+ }
+ }
+ }
+ else
+ {
+ remain = Userdef_USB_usb1_function_stop_dma1();
+ usb1_function_dma_stop_d1(pipe, remain);
+
+ if (RZA_IO_RegRead_16(&g_usb1_function_pipecfg[pipe], USB_PIPECFG_BFRE_SHIFT, USB_PIPECFG_BFRE) == 0)
+ {
+ if (g_usb1_function_DmaStatus[USB_FUNCTION_D1FIFO] == USB_FUNCTION_DMA_BUSYEND)
+ {
+ USB201.D1FIFOCTR = USB_FUNCTION_BITBCLR;
+ g_usb1_function_pipe_status[pipe] = DEVDRV_USBF_PIPE_DONE;
+ }
+ else
+ {
+ usb1_function_enable_brdy_int(pipe);
+ }
+ }
+ }
+ }
+}
+
+/*******************************************************************************
+* Function Name: usb1_function_dmaint_buf2fifo
+* Description : Executes write completion in FIFO by DMAC.
+* Arguments : uint16_t pipe : pipe number
+* Return Value : none
+*******************************************************************************/
+static void usb1_function_dmaint_buf2fifo (uint16_t pipe)
+{
+ uint32_t remain;
+ uint16_t useport;
+
+ useport = (uint16_t)(g_usb1_function_PipeTbl[pipe] & USB_FUNCTION_FIFO_USE);
+
+ if (useport == USB_FUNCTION_D0FIFO_DMA)
+ {
+ remain = Userdef_USB_usb1_function_stop_dma0();
+ usb1_function_dma_stop_d0(pipe, remain);
+
+ if (g_usb1_function_DmaBval[USB_FUNCTION_D0FIFO] != 0)
+ {
+ RZA_IO_RegWrite_16(&USB201.D0FIFOCTR,
+ 1,
+ USB_DnFIFOCTR_BVAL_SHIFT,
+ USB_DnFIFOCTR_BVAL);
+ }
+ }
+ else
+ {
+ remain = Userdef_USB_usb1_function_stop_dma1();
+ usb1_function_dma_stop_d1(pipe, remain);
+
+ if (g_usb1_function_DmaBval[USB_FUNCTION_D1FIFO] != 0)
+ {
+ RZA_IO_RegWrite_16(&USB201.D1FIFOCTR,
+ 1,
+ USB_DnFIFOCTR_BVAL_SHIFT,
+ USB_DnFIFOCTR_BVAL);
+ }
+ }
+
+ usb1_function_enable_bemp_int(pipe);
+}
+
+/* End of File */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/USBDevice/TARGET_RENESAS/TARGET_VK_RZ_A1H/usb1/src/common/usb1_function_intrn.c Fri Apr 29 01:16:25 2016 +0100
@@ -0,0 +1,249 @@
+/*******************************************************************************
+* DISCLAIMER
+* This software is supplied by Renesas Electronics Corporation and is only
+* intended for use with Renesas products. No other uses are authorized. This
+* software is owned by Renesas Electronics Corporation and is protected under
+* all applicable laws, including copyright laws.
+* THIS SOFTWARE IS PROVIDED "AS IS" AND RENESAS MAKES NO WARRANTIES REGARDING
+* THIS SOFTWARE, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING BUT NOT
+* LIMITED TO WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE
+* AND NON-INFRINGEMENT. ALL SUCH WARRANTIES ARE EXPRESSLY DISCLAIMED.
+* TO THE MAXIMUM EXTENT PERMITTED NOT PROHIBITED BY LAW, NEITHER RENESAS
+* ELECTRONICS CORPORATION NOR ANY OF ITS AFFILIATED COMPANIES SHALL BE LIABLE
+* FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR
+* ANY REASON RELATED TO THIS SOFTWARE, EVEN IF RENESAS OR ITS AFFILIATES HAVE
+* BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
+* Renesas reserves the right, without notice, to make changes to this software
+* and to discontinue the availability of this software. By using this software,
+* you agree to the additional terms and conditions found by accessing the
+* following link:
+* http://www.renesas.com/disclaimer
+* Copyright (C) 2012 - 2014 Renesas Electronics Corporation. All rights reserved.
+*******************************************************************************/
+/*******************************************************************************
+* File Name : usb1_function_intrn.c
+* $Rev: 1116 $
+* $Date:: 2014-07-09 16:29:19 +0900#$
+* Device(s) : RZ/A1H
+* Tool-Chain :
+* OS : None
+* H/W Platform :
+* Description : RZ/A1H R7S72100 USB Sample Program
+* Operation :
+* Limitations :
+*******************************************************************************/
+
+
+/*******************************************************************************
+Includes <System Includes> , "Project Includes"
+*******************************************************************************/
+#include "usb1_function.h"
+
+
+/*******************************************************************************
+Typedef definitions
+*******************************************************************************/
+
+
+/*******************************************************************************
+Macro definitions
+*******************************************************************************/
+
+
+/*******************************************************************************
+Imported global variables and functions (from other files)
+*******************************************************************************/
+
+
+/*******************************************************************************
+Exported global variables and functions (to be accessed by other files)
+*******************************************************************************/
+
+
+/*******************************************************************************
+Private global variables and functions
+*******************************************************************************/
+
+
+/*******************************************************************************
+* Function Name: usb1_function_brdy_int
+* Description : Executes BRDY interrupt(USB_FUNCTION_PIPE1-9).
+* : According to the pipe that interrupt is generated in,
+* : reads/writes buffer allocated in the pipe.
+* : This function is executed in the BRDY interrupt handler.
+* : This function clears BRDY interrupt status and BEMP interrupt
+* : status.
+* Arguments : uint16_t Status ; BRDYSTS Register Value
+* : uint16_t Int_enbl ; BRDYENB Register Value
+* Return Value : none
+*******************************************************************************/
+#if 0
+void usb1_function_brdy_int (uint16_t status, uint16_t int_enb)
+{
+ uint32_t int_sense = 0;
+ uint16_t pipe;
+ uint16_t pipebit;
+
+ for (pipe = USB_FUNCTION_PIPE1; pipe <= USB_FUNCTION_MAX_PIPE_NO; pipe++)
+ {
+ pipebit = g_usb1_function_bit_set[pipe];
+
+ if ((status & pipebit) && (int_enb & pipebit))
+ {
+ USB201.BRDYSTS = (uint16_t)~pipebit;
+ USB201.BEMPSTS = (uint16_t)~pipebit;
+ if ((g_usb1_function_PipeTbl[pipe] & USB_FUNCTION_FIFO_USE) == USB_FUNCTION_D0FIFO_DMA)
+ {
+ if (g_usb1_function_DmaStatus[USB_FUNCTION_D0FIFO] != USB_FUNCTION_DMA_READY)
+ {
+ usb1_function_dma_interrupt_d0fifo(int_sense);
+ }
+
+ if (RZA_IO_RegRead_16(&g_usb1_function_pipecfg[pipe], USB_PIPECFG_BFRE_SHIFT, USB_PIPECFG_BFRE) == 0)
+ {
+ usb1_function_read_dma(pipe);
+ usb1_function_disable_brdy_int(pipe);
+ }
+ else
+ {
+ USB201.D0FIFOCTR = USB_FUNCTION_BITBCLR;
+ g_usb1_function_pipe_status[pipe] = DEVDRV_USBF_PIPE_DONE;
+ }
+ }
+ else if ((g_usb1_function_PipeTbl[pipe] & USB_FUNCTION_FIFO_USE) == USB_FUNCTION_D1FIFO_DMA)
+ {
+ if (g_usb1_function_DmaStatus[USB_FUNCTION_D1FIFO] != USB_FUNCTION_DMA_READY)
+ {
+ usb1_function_dma_interrupt_d1fifo(int_sense);
+ }
+
+ if (RZA_IO_RegRead_16(&g_usb1_function_pipecfg[pipe], USB_PIPECFG_BFRE_SHIFT, USB_PIPECFG_BFRE) == 0)
+ {
+ usb1_function_read_dma(pipe);
+ usb1_function_disable_brdy_int(pipe);
+ }
+ else
+ {
+ USB201.D1FIFOCTR = USB_FUNCTION_BITBCLR;
+ g_usb1_function_pipe_status[pipe] = DEVDRV_USBF_PIPE_DONE;
+ }
+ }
+ else
+ {
+ if (RZA_IO_RegRead_16(&g_usb1_function_pipecfg[pipe], USB_PIPECFG_DIR_SHIFT, USB_PIPECFG_DIR) == 0)
+ {
+ usb1_function_read_buffer(pipe);
+ }
+ else
+ {
+ usb1_function_write_buffer(pipe);
+ }
+ }
+ }
+ }
+}
+#endif
+
+/*******************************************************************************
+* Function Name: usb1_function_nrdy_int
+* Description : Executes NRDY interrupt(USB_FUNCTION_PIPE1-9).
+* : Checks NRDY interrupt cause by PID. When the cause if STALL,
+* : regards the pipe state as STALL and ends the processing.
+* : Then the cause is not STALL, increments the error count to
+* : communicate again. When the error count is 3, determines
+* : the pipe state as DEVDRV_USBF_PIPE_NORES and ends the processing.
+* : This function is executed in the NRDY interrupt handler.
+* : This function clears NRDY interrupt status.
+* Arguments : uint16_t status ; NRDYSTS Register Value
+* : uint16_t int_enb ; NRDYENB Register Value
+* Return Value : none
+*******************************************************************************/
+void usb1_function_nrdy_int (uint16_t status, uint16_t int_enb)
+{
+ uint16_t pid;
+ uint16_t pipe;
+ uint16_t bitcheck;
+
+ bitcheck = (uint16_t)(status & int_enb);
+
+ USB201.NRDYSTS = (uint16_t)~status;
+
+ for (pipe = USB_FUNCTION_PIPE1; pipe <= USB_FUNCTION_MAX_PIPE_NO; pipe++)
+ {
+ if ((bitcheck&g_usb1_function_bit_set[pipe]) == g_usb1_function_bit_set[pipe])
+ {
+ if (RZA_IO_RegRead_16(&USB201.SYSCFG0, USB_SYSCFG_DCFM_SHIFT, USB_SYSCFG_DCFM) == 1)
+ {
+ if (g_usb1_function_pipe_status[pipe] == DEVDRV_USBF_PIPE_WAIT)
+ {
+ pid = usb1_function_get_pid(pipe);
+ if ((pid == DEVDRV_USBF_PID_STALL) || (pid == DEVDRV_USBF_PID_STALL2))
+ {
+ g_usb1_function_pipe_status[pipe] = DEVDRV_USBF_PIPE_STALL;
+ }
+ else
+ {
+ g_usb1_function_PipeIgnore[pipe]++;
+ if (g_usb1_function_PipeIgnore[pipe] == 3)
+ {
+ g_usb1_function_pipe_status[pipe] = DEVDRV_USBF_PIPE_NORES;
+ }
+ else
+ {
+ usb1_function_set_pid_buf(pipe);
+ }
+ }
+ }
+ }
+ else
+ {
+ /* USB Function */
+ }
+ }
+ }
+}
+
+/*******************************************************************************
+* Function Name: usb1_function_bemp_int
+* Description : Executes BEMP interrupt(USB_FUNCTION_PIPE1-9).
+* Arguments : uint16_t status ; BEMPSTS Register Value
+* : uint16_t int_enb ; BEMPENB Register Value
+* Return Value : none
+*******************************************************************************/
+void usb1_function_bemp_int (uint16_t status, uint16_t int_enb)
+{
+ uint16_t pid;
+ uint16_t pipe;
+ uint16_t bitcheck;
+ uint16_t inbuf;
+
+ bitcheck = (uint16_t)(status & int_enb);
+
+ USB201.BEMPSTS = (uint16_t)~status;
+
+ for (pipe = USB_FUNCTION_PIPE1; pipe <= USB_FUNCTION_MAX_PIPE_NO; pipe++)
+ {
+ if ((bitcheck&g_usb1_function_bit_set[pipe]) == g_usb1_function_bit_set[pipe])
+ {
+ pid = usb1_function_get_pid(pipe);
+
+ if ((pid == DEVDRV_USBF_PID_STALL) || (pid == DEVDRV_USBF_PID_STALL2))
+ {
+ g_usb1_function_pipe_status[pipe] = DEVDRV_USBF_PIPE_STALL;
+ }
+ else
+ {
+ inbuf = usb1_function_get_inbuf(pipe);
+
+ if (inbuf == 0)
+ {
+ usb1_function_disable_bemp_int(pipe);
+ usb1_function_set_pid_nak(pipe);
+ g_usb1_function_pipe_status[pipe] = DEVDRV_USBF_PIPE_DONE;
+ }
+ }
+ }
+ }
+}
+
+/* End of File */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/USBDevice/TARGET_RENESAS/TARGET_VK_RZ_A1H/usb1/src/common/usb1_function_lib.c Fri Apr 29 01:16:25 2016 +0100
@@ -0,0 +1,2044 @@
+/*******************************************************************************
+* DISCLAIMER
+* This software is supplied by Renesas Electronics Corporation and is only
+* intended for use with Renesas products. No other uses are authorized. This
+* software is owned by Renesas Electronics Corporation and is protected under
+* all applicable laws, including copyright laws.
+* THIS SOFTWARE IS PROVIDED "AS IS" AND RENESAS MAKES NO WARRANTIES REGARDING
+* THIS SOFTWARE, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING BUT NOT
+* LIMITED TO WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE
+* AND NON-INFRINGEMENT. ALL SUCH WARRANTIES ARE EXPRESSLY DISCLAIMED.
+* TO THE MAXIMUM EXTENT PERMITTED NOT PROHIBITED BY LAW, NEITHER RENESAS
+* ELECTRONICS CORPORATION NOR ANY OF ITS AFFILIATED COMPANIES SHALL BE LIABLE
+* FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR
+* ANY REASON RELATED TO THIS SOFTWARE, EVEN IF RENESAS OR ITS AFFILIATES HAVE
+* BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
+* Renesas reserves the right, without notice, to make changes to this software
+* and to discontinue the availability of this software. By using this software,
+* you agree to the additional terms and conditions found by accessing the
+* following link:
+* http://www.renesas.com/disclaimer
+* Copyright (C) 2012 - 2014 Renesas Electronics Corporation. All rights reserved.
+*******************************************************************************/
+/*******************************************************************************
+* File Name : usb1_function_lib.c
+* $Rev: 1116 $
+* $Date:: 2014-07-09 16:29:19 +0900#$
+* Device(s) : RZ/A1H
+* Tool-Chain :
+* OS : None
+* H/W Platform :
+* Description : RZ/A1H R7S72100 USB Sample Program
+* Operation :
+* Limitations :
+*******************************************************************************/
+
+
+/*******************************************************************************
+Includes <System Includes> , "Project Includes"
+*******************************************************************************/
+#include "usb1_function.h"
+
+
+/*******************************************************************************
+Typedef definitions
+*******************************************************************************/
+
+
+/*******************************************************************************
+Macro definitions
+*******************************************************************************/
+
+
+/*******************************************************************************
+Imported global variables and functions (from other files)
+*******************************************************************************/
+
+
+/*******************************************************************************
+Exported global variables and functions (to be accessed by other files)
+*******************************************************************************/
+
+
+/*******************************************************************************
+Private global variables and functions
+*******************************************************************************/
+
+
+/*******************************************************************************
+* Function Name: usb1_function_enable_brdy_int
+* Description : Enables BRDY interrupt in the pipe spceified by the argument.
+* : Disables BEMP/NRDY/BRDY interrupts in all pipes before enabling
+* : BRDY. Enables BRDY interrupt in the pipe specified by the argument
+* : in the disabled status. After enabling BRDY, recover all
+* : BEMP/NRDY/BRDY disabled/enabled status.
+* Arguments : uint16_t pipe ; pipe Number
+* Return Value : none
+*******************************************************************************/
+void usb1_function_enable_brdy_int (uint16_t pipe)
+{
+ /* enable brdy interrupt */
+ USB201.BRDYENB |= (uint16_t)g_usb1_function_bit_set[pipe];
+}
+
+/*******************************************************************************
+* Function Name: usb1_function_disable_brdy_int
+* Description : Disables BRDY interrupt in the pipe spceified by the argument.
+* : Disables BEMP/NRDY/BRDY interrupts in all pipes before disabling
+* : BRDY. Enables BRDY interrupt in the pipe specified by the argument
+* : in the disabled status. After disabling BRDY, recover all
+* : BEMP/NRDY/BRDY disabled/enabled status.
+* Arguments : uint16_t pipe ; pipe Number
+* Return Value : none
+*******************************************************************************/
+void usb1_function_disable_brdy_int (uint16_t pipe)
+{
+ /* disable brdy interrupt */
+ USB201.BRDYENB &= (uint16_t)~(g_usb1_function_bit_set[pipe]);
+}
+
+/*******************************************************************************
+* Function Name: usb1_function_clear_brdy_sts
+* Description : Clear BRDY interrupt status in the pipe spceified by the argument.
+* Arguments : uint16_t pipe ; pipe Number
+* Return Value : none
+*******************************************************************************/
+void usb1_function_clear_brdy_sts (uint16_t pipe)
+{
+ /* clear brdy status */
+ USB201.BRDYSTS = (uint16_t)~(g_usb1_function_bit_set[pipe]);
+}
+
+/*******************************************************************************
+* Function Name: usb1_function_enable_bemp_int
+* Description : Enables BEMP interrupt in the pipe spceified by the argument.
+* : Disables BEMP/NRDY/BRDY interrupts in all pipes before enabling
+* : BEMP. Enables BEMP interrupt in the pipe specified by the argument
+* : in the disabled status. After enabling BEMP, recover all
+* : BEMP/NRDY/BRDY disabled/enabled status.
+* Arguments : uint16_t pipe ; pipe Number
+* Return Value : none
+*******************************************************************************/
+void usb1_function_enable_bemp_int (uint16_t pipe)
+{
+ /* enable bemp interrupt */
+ USB201.BEMPENB |= (uint16_t)g_usb1_function_bit_set[pipe];
+}
+
+/*******************************************************************************
+* Function Name: usb1_function_disable_bemp_int
+* Description : Disables BEMP interrupt in the pipe spceified by the argument.
+* : Disables BEMP/NRDY/BRDY interrupts in all pipes before disabling
+* : BEMP. Enables BEMP interrupt in the pipe specified by the argument
+* : in the disabled status. After enabling BEMP, recover all
+* : BEMP/NRDY/BRDY disabled/enabled status.
+* Arguments : uint16_t pipe ; pipe Number
+* Return Value : none
+*******************************************************************************/
+void usb1_function_disable_bemp_int (uint16_t pipe)
+{
+ /* disable bemp interrupt */
+ USB201.BEMPENB &= (uint16_t)~(g_usb1_function_bit_set[pipe]);
+}
+
+/*******************************************************************************
+* Function Name: usb1_function_clear_bemp_sts
+* Description : Clear BEMP interrupt status in the pipe spceified by the argument.
+* Arguments : uint16_t pipe ; pipe Number
+* Return Value : none
+*******************************************************************************/
+void usb1_function_clear_bemp_sts (uint16_t pipe)
+{
+ /* clear bemp status */
+ USB201.BEMPSTS = (uint16_t)~(g_usb1_function_bit_set[pipe]);
+}
+
+/*******************************************************************************
+* Function Name: usb1_function_enable_nrdy_int
+* Description : Enables NRDY interrupt in the pipe spceified by the argument.
+* : Disables BEMP/NRDY/BRDY interrupts in all pipes before enabling
+* : NRDY. Enables NRDY interrupt in the pipe specified by the argument
+* : in the disabled status. After enabling NRDY, recover all
+* : BEMP/NRDY/BRDY disabled/enabled status.
+* Arguments : uint16_t pipe ; pipe Number
+* Return Value : none
+*******************************************************************************/
+void usb1_function_enable_nrdy_int (uint16_t pipe)
+{
+ /* enable nrdy interrupt */
+ USB201.NRDYENB |= (uint16_t)g_usb1_function_bit_set[pipe];
+}
+
+/*******************************************************************************
+* Function Name: usb1_function_disable_nrdy_int
+* Description : Disables NRDY interrupt in the pipe spceified by the argument.
+* : Disables BEMP/NRDY/BRDY interrupts in all pipes before disabling
+* : NRDY. Disables NRDY interrupt in the pipe specified by the argument
+* : in the disabled status. After disabling NRDY, recover all
+* : BEMP/NRDY/BRDY disabled/enabled status.
+* Arguments : uint16_t pipe ; pipe Number
+* Return Value : none
+*******************************************************************************/
+void usb1_function_disable_nrdy_int (uint16_t pipe)
+{
+ /* disable nrdy interrupt */
+ USB201.NRDYENB &= (uint16_t)~(g_usb1_function_bit_set[pipe]);
+}
+
+/*******************************************************************************
+* Function Name: usb1_function_clear_nrdy_sts
+* Description : Clear NRDY interrupt status in the pipe spceified by the argument.
+* Arguments : uint16_t pipe ; pipe Number
+* Return Value : none
+*******************************************************************************/
+void usb1_function_clear_nrdy_sts (uint16_t pipe)
+{
+ /* clear nrdy status */
+ USB201.NRDYSTS = (uint16_t)~(g_usb1_function_bit_set[pipe]);
+}
+
+/*******************************************************************************
+* Function Name: usb1_function_is_hispeed
+* Description : Returns the result of USB reset hand shake (RHST) as
+* : return value.
+* Arguments : none
+* Return Value : USB_FUNCTION_HIGH_SPEED ; Hi-Speed
+* : USB_FUNCTION_FULL_SPEED ; Full-Speed
+* : LOW_SPEED ; Low-Speed
+* : USB_FUNCTION_NON_SPEED ; error
+*******************************************************************************/
+uint16_t usb1_function_is_hispeed (void)
+{
+ uint16_t rhst;
+ uint16_t speed;
+
+ rhst = RZA_IO_RegRead_16(&USB201.DVSTCTR0, USB_DVSTCTR0_RHST_SHIFT, USB_DVSTCTR0_RHST);
+
+ if (rhst == USB_FUNCTION_HSMODE)
+ {
+ speed = USB_FUNCTION_HIGH_SPEED;
+ }
+ else if (rhst == USB_FUNCTION_FSMODE)
+ {
+ speed = USB_FUNCTION_FULL_SPEED;
+ }
+ else if (rhst == USB_FUNCTION_LSMODE)
+ {
+ speed = USB_FUNCTION_LOW_SPEED;
+ }
+ else
+ {
+ speed = USB_FUNCTION_NON_SPEED;
+ }
+
+ return speed;
+}
+
+/*******************************************************************************
+* Function Name: usb1_function_is_hispeed_enable
+* Description : Returns the USB High-Speed connection enabled status as
+* : return value.
+* Arguments : none
+* Return Value : DEVDRV_USBF_YES : Hi-Speed Enable
+* : DEVDRV_USBF_NO : Hi-Speed Disable
+*******************************************************************************/
+uint16_t usb1_function_is_hispeed_enable (void)
+{
+ uint16_t ret;
+
+ ret = DEVDRV_USBF_NO;
+
+ if (RZA_IO_RegRead_16(&USB201.SYSCFG0, USB_SYSCFG_HSE_SHIFT, USB_SYSCFG_HSE) == 1)
+ {
+ ret = DEVDRV_USBF_YES;
+ }
+
+ return ret;
+}
+
+/*******************************************************************************
+* Function Name: usb1_function_set_pid_buf
+* Description : Enables communicaqtion in the pipe specified by the argument
+* : (BUF).
+* Arguments : uint16_t pipe ; pipe Number
+* Return Value : none
+*******************************************************************************/
+void usb1_function_set_pid_buf (uint16_t pipe)
+{
+ uint16_t pid;
+
+ pid = usb1_function_get_pid(pipe);
+
+ if (pid == DEVDRV_USBF_PID_STALL2)
+ {
+ usb1_function_set_pid_nak(pipe);
+ }
+
+ switch (pipe)
+ {
+ case USB_FUNCTION_PIPE0:
+ RZA_IO_RegWrite_16(&USB201.DCPCTR,
+ DEVDRV_USBF_PID_BUF,
+ USB_DCPCTR_PID_SHIFT,
+ USB_DCPCTR_PID);
+ break;
+
+ case USB_FUNCTION_PIPE1:
+ RZA_IO_RegWrite_16(&USB201.PIPE1CTR,
+ DEVDRV_USBF_PID_BUF,
+ USB_PIPEnCTR_1_5_PID_SHIFT,
+ USB_PIPEnCTR_1_5_PID);
+ break;
+
+ case USB_FUNCTION_PIPE2:
+ RZA_IO_RegWrite_16(&USB201.PIPE2CTR,
+ DEVDRV_USBF_PID_BUF,
+ USB_PIPEnCTR_1_5_PID_SHIFT,
+ USB_PIPEnCTR_1_5_PID);
+ break;
+
+ case USB_FUNCTION_PIPE3:
+ RZA_IO_RegWrite_16(&USB201.PIPE3CTR,
+ DEVDRV_USBF_PID_BUF,
+ USB_PIPEnCTR_1_5_PID_SHIFT,
+ USB_PIPEnCTR_1_5_PID);
+ break;
+
+ case USB_FUNCTION_PIPE4:
+ RZA_IO_RegWrite_16(&USB201.PIPE4CTR,
+ DEVDRV_USBF_PID_BUF,
+ USB_PIPEnCTR_1_5_PID_SHIFT,
+ USB_PIPEnCTR_1_5_PID);
+ break;
+
+ case USB_FUNCTION_PIPE5:
+ RZA_IO_RegWrite_16(&USB201.PIPE5CTR,
+ DEVDRV_USBF_PID_BUF,
+ USB_PIPEnCTR_1_5_PID_SHIFT,
+ USB_PIPEnCTR_1_5_PID);
+ break;
+
+ case USB_FUNCTION_PIPE6:
+ RZA_IO_RegWrite_16(&USB201.PIPE6CTR,
+ DEVDRV_USBF_PID_BUF,
+ USB_PIPEnCTR_6_8_PID_SHIFT,
+ USB_PIPEnCTR_6_8_PID);
+ break;
+
+ case USB_FUNCTION_PIPE7:
+ RZA_IO_RegWrite_16(&USB201.PIPE7CTR,
+ DEVDRV_USBF_PID_BUF,
+ USB_PIPEnCTR_6_8_PID_SHIFT,
+ USB_PIPEnCTR_6_8_PID);
+ break;
+
+ case USB_FUNCTION_PIPE8:
+ RZA_IO_RegWrite_16(&USB201.PIPE8CTR,
+ DEVDRV_USBF_PID_BUF,
+ USB_PIPEnCTR_6_8_PID_SHIFT,
+ USB_PIPEnCTR_6_8_PID);
+ break;
+
+ case USB_FUNCTION_PIPE9:
+ RZA_IO_RegWrite_16(&USB201.PIPE9CTR,
+ DEVDRV_USBF_PID_BUF,
+ USB_PIPEnCTR_9_PID_SHIFT,
+ USB_PIPEnCTR_9_PID);
+ break;
+
+ case USB_FUNCTION_PIPEA:
+ RZA_IO_RegWrite_16(&USB201.PIPEACTR,
+ DEVDRV_USBF_PID_BUF,
+ USB_PIPEnCTR_A_F_PID_SHIFT,
+ USB_PIPEnCTR_A_F_PID);
+ break;
+
+ case USB_FUNCTION_PIPEB:
+ RZA_IO_RegWrite_16(&USB201.PIPEBCTR,
+ DEVDRV_USBF_PID_BUF,
+ USB_PIPEnCTR_A_F_PID_SHIFT,
+ USB_PIPEnCTR_A_F_PID);
+ break;
+
+ case USB_FUNCTION_PIPEC:
+ RZA_IO_RegWrite_16(&USB201.PIPECCTR,
+ DEVDRV_USBF_PID_BUF,
+ USB_PIPEnCTR_A_F_PID_SHIFT,
+ USB_PIPEnCTR_A_F_PID);
+ break;
+
+ case USB_FUNCTION_PIPED:
+ RZA_IO_RegWrite_16(&USB201.PIPEDCTR,
+ DEVDRV_USBF_PID_BUF,
+ USB_PIPEnCTR_A_F_PID_SHIFT,
+ USB_PIPEnCTR_A_F_PID);
+ break;
+
+ case USB_FUNCTION_PIPEE:
+ RZA_IO_RegWrite_16(&USB201.PIPEECTR,
+ DEVDRV_USBF_PID_BUF,
+ USB_PIPEnCTR_A_F_PID_SHIFT,
+ USB_PIPEnCTR_A_F_PID);
+ break;
+
+ case USB_FUNCTION_PIPEF:
+ RZA_IO_RegWrite_16(&USB201.PIPEFCTR,
+ DEVDRV_USBF_PID_BUF,
+ USB_PIPEnCTR_A_F_PID_SHIFT,
+ USB_PIPEnCTR_A_F_PID);
+ break;
+
+ default:
+ break;
+ }
+}
+
+/*******************************************************************************
+* Function Name: usb1_function_set_pid_nak
+* Description : Disables communication (NAK) in the pipe specified by the argument.
+* : When the pipe status was enabling communication (BUF) before
+* : executing before executing this function, waits in the software
+* : until the pipe becomes ready after setting disabled.
+* Arguments : uint16_t pipe ; pipe Number
+* Return Value : none
+*******************************************************************************/
+void usb1_function_set_pid_nak (uint16_t pipe)
+{
+ uint16_t pid;
+ uint16_t pbusy;
+ uint32_t loop;
+
+ pid = usb1_function_get_pid(pipe);
+
+ if (pid == DEVDRV_USBF_PID_STALL2)
+ {
+ usb1_function_set_pid_stall(pipe);
+ }
+
+ switch (pipe)
+ {
+ case USB_FUNCTION_PIPE0:
+ RZA_IO_RegWrite_16(&USB201.DCPCTR,
+ DEVDRV_USBF_PID_NAK,
+ USB_DCPCTR_PID_SHIFT,
+ USB_DCPCTR_PID);
+ break;
+
+ case USB_FUNCTION_PIPE1:
+ RZA_IO_RegWrite_16(&USB201.PIPE1CTR,
+ DEVDRV_USBF_PID_NAK,
+ USB_PIPEnCTR_1_5_PID_SHIFT,
+ USB_PIPEnCTR_1_5_PID);
+ break;
+
+ case USB_FUNCTION_PIPE2:
+ RZA_IO_RegWrite_16(&USB201.PIPE2CTR,
+ DEVDRV_USBF_PID_NAK,
+ USB_PIPEnCTR_1_5_PID_SHIFT,
+ USB_PIPEnCTR_1_5_PID);
+ break;
+
+ case USB_FUNCTION_PIPE3:
+ RZA_IO_RegWrite_16(&USB201.PIPE3CTR,
+ DEVDRV_USBF_PID_NAK,
+ USB_PIPEnCTR_1_5_PID_SHIFT,
+ USB_PIPEnCTR_1_5_PID);
+ break;
+
+ case USB_FUNCTION_PIPE4:
+ RZA_IO_RegWrite_16(&USB201.PIPE4CTR,
+ DEVDRV_USBF_PID_NAK,
+ USB_PIPEnCTR_1_5_PID_SHIFT,
+ USB_PIPEnCTR_1_5_PID);
+ break;
+
+ case USB_FUNCTION_PIPE5:
+ RZA_IO_RegWrite_16(&USB201.PIPE5CTR,
+ DEVDRV_USBF_PID_NAK,
+ USB_PIPEnCTR_1_5_PID_SHIFT,
+ USB_PIPEnCTR_1_5_PID);
+ break;
+
+ case USB_FUNCTION_PIPE6:
+ RZA_IO_RegWrite_16(&USB201.PIPE6CTR,
+ DEVDRV_USBF_PID_NAK,
+ USB_PIPEnCTR_6_8_PID_SHIFT,
+ USB_PIPEnCTR_6_8_PID);
+ break;
+
+ case USB_FUNCTION_PIPE7:
+ RZA_IO_RegWrite_16(&USB201.PIPE7CTR,
+ DEVDRV_USBF_PID_NAK,
+ USB_PIPEnCTR_6_8_PID_SHIFT,
+ USB_PIPEnCTR_6_8_PID);
+ break;
+
+ case USB_FUNCTION_PIPE8:
+ RZA_IO_RegWrite_16(&USB201.PIPE8CTR,
+ DEVDRV_USBF_PID_NAK,
+ USB_PIPEnCTR_6_8_PID_SHIFT,
+ USB_PIPEnCTR_6_8_PID);
+ break;
+
+ case USB_FUNCTION_PIPE9:
+ RZA_IO_RegWrite_16(&USB201.PIPE9CTR,
+ DEVDRV_USBF_PID_NAK,
+ USB_PIPEnCTR_9_PID_SHIFT,
+ USB_PIPEnCTR_9_PID);
+ break;
+
+ case USB_FUNCTION_PIPEA:
+ RZA_IO_RegWrite_16(&USB201.PIPEACTR,
+ DEVDRV_USBF_PID_NAK,
+ USB_PIPEnCTR_A_F_PID_SHIFT,
+ USB_PIPEnCTR_A_F_PID);
+ break;
+
+ case USB_FUNCTION_PIPEB:
+ RZA_IO_RegWrite_16(&USB201.PIPEBCTR,
+ DEVDRV_USBF_PID_NAK,
+ USB_PIPEnCTR_A_F_PID_SHIFT,
+ USB_PIPEnCTR_A_F_PID);
+ break;
+
+ case USB_FUNCTION_PIPEC:
+ RZA_IO_RegWrite_16(&USB201.PIPECCTR,
+ DEVDRV_USBF_PID_NAK,
+ USB_PIPEnCTR_A_F_PID_SHIFT,
+ USB_PIPEnCTR_A_F_PID);
+ break;
+
+ case USB_FUNCTION_PIPED:
+ RZA_IO_RegWrite_16(&USB201.PIPEDCTR,
+ DEVDRV_USBF_PID_NAK,
+ USB_PIPEnCTR_A_F_PID_SHIFT,
+ USB_PIPEnCTR_A_F_PID);
+ break;
+
+ case USB_FUNCTION_PIPEE:
+ RZA_IO_RegWrite_16(&USB201.PIPEECTR,
+ DEVDRV_USBF_PID_NAK,
+ USB_PIPEnCTR_A_F_PID_SHIFT,
+ USB_PIPEnCTR_A_F_PID);
+ break;
+
+ case USB_FUNCTION_PIPEF:
+ RZA_IO_RegWrite_16(&USB201.PIPEFCTR,
+ DEVDRV_USBF_PID_NAK,
+ USB_PIPEnCTR_A_F_PID_SHIFT,
+ USB_PIPEnCTR_A_F_PID);
+ break;
+
+ default:
+ break;
+ }
+
+ if (pid == DEVDRV_USBF_PID_BUF)
+ {
+ for (loop = 0; loop < 200; loop++)
+ {
+ switch (pipe)
+ {
+ case USB_FUNCTION_PIPE0:
+ pbusy = RZA_IO_RegRead_16(&USB201.DCPCTR,
+ USB_DCPCTR_PBUSY_SHIFT,
+ USB_DCPCTR_PBUSY);
+ break;
+
+ case USB_FUNCTION_PIPE1:
+ pbusy = RZA_IO_RegRead_16(&USB201.PIPE1CTR,
+ USB_PIPEnCTR_1_5_PBUSY_SHIFT,
+ USB_PIPEnCTR_1_5_PBUSY);
+ break;
+
+ case USB_FUNCTION_PIPE2:
+ pbusy = RZA_IO_RegRead_16(&USB201.PIPE2CTR,
+ USB_PIPEnCTR_1_5_PBUSY_SHIFT,
+ USB_PIPEnCTR_1_5_PBUSY);
+ break;
+
+ case USB_FUNCTION_PIPE3:
+ pbusy = RZA_IO_RegRead_16(&USB201.PIPE3CTR,
+ USB_PIPEnCTR_1_5_PBUSY_SHIFT,
+ USB_PIPEnCTR_1_5_PBUSY);
+ break;
+
+ case USB_FUNCTION_PIPE4:
+ pbusy = RZA_IO_RegRead_16(&USB201.PIPE4CTR,
+ USB_PIPEnCTR_1_5_PBUSY_SHIFT,
+ USB_PIPEnCTR_1_5_PBUSY);
+ break;
+
+ case USB_FUNCTION_PIPE5:
+ pbusy = RZA_IO_RegRead_16(&USB201.PIPE5CTR,
+ USB_PIPEnCTR_1_5_PBUSY_SHIFT,
+ USB_PIPEnCTR_1_5_PBUSY);
+ break;
+
+ case USB_FUNCTION_PIPE6:
+ pbusy = RZA_IO_RegRead_16(&USB201.PIPE6CTR,
+ USB_PIPEnCTR_6_8_PBUSY_SHIFT,
+ USB_PIPEnCTR_6_8_PBUSY);
+ break;
+
+ case USB_FUNCTION_PIPE7:
+ pbusy = RZA_IO_RegRead_16(&USB201.PIPE7CTR,
+ USB_PIPEnCTR_6_8_PBUSY_SHIFT,
+ USB_PIPEnCTR_6_8_PBUSY);
+ break;
+
+ case USB_FUNCTION_PIPE8:
+ pbusy = RZA_IO_RegRead_16(&USB201.PIPE8CTR,
+ USB_PIPEnCTR_6_8_PBUSY_SHIFT,
+ USB_PIPEnCTR_6_8_PBUSY);
+ break;
+
+ case USB_FUNCTION_PIPE9:
+ pbusy = RZA_IO_RegRead_16(&USB201.PIPE9CTR,
+ USB_PIPEnCTR_9_PBUSY_SHIFT,
+ USB_PIPEnCTR_9_PBUSY);
+ break;
+
+ case USB_FUNCTION_PIPEA:
+ pbusy = RZA_IO_RegRead_16(&USB201.PIPEACTR,
+ USB_PIPEnCTR_A_F_PBUSY_SHIFT,
+ USB_PIPEnCTR_A_F_PBUSY);
+ break;
+
+ case USB_FUNCTION_PIPEB:
+ pbusy = RZA_IO_RegRead_16(&USB201.PIPEBCTR,
+ USB_PIPEnCTR_A_F_PBUSY_SHIFT,
+ USB_PIPEnCTR_A_F_PBUSY);
+ break;
+
+ case USB_FUNCTION_PIPEC:
+ pbusy = RZA_IO_RegRead_16(&USB201.PIPECCTR,
+ USB_PIPEnCTR_A_F_PBUSY_SHIFT,
+ USB_PIPEnCTR_A_F_PBUSY);
+ break;
+
+ case USB_FUNCTION_PIPED:
+ pbusy = RZA_IO_RegRead_16(&USB201.PIPEDCTR,
+ USB_PIPEnCTR_A_F_PBUSY_SHIFT,
+ USB_PIPEnCTR_A_F_PBUSY);
+ break;
+
+ case USB_FUNCTION_PIPEE:
+ pbusy = RZA_IO_RegRead_16(&USB201.PIPEECTR,
+ USB_PIPEnCTR_A_F_PBUSY_SHIFT,
+ USB_PIPEnCTR_A_F_PBUSY);
+ break;
+
+ case USB_FUNCTION_PIPEF:
+ pbusy = RZA_IO_RegRead_16(&USB201.PIPEFCTR,
+ USB_PIPEnCTR_A_F_PBUSY_SHIFT,
+ USB_PIPEnCTR_A_F_PBUSY);
+ break;
+
+ default:
+ pbusy = 1;
+ break;
+ }
+
+ if (pbusy == 0)
+ {
+ break;
+ }
+ Userdef_USB_usb1_function_delay_500ns();
+ }
+ }
+}
+
+/*******************************************************************************
+* Function Name: usb1_function_set_pid_stall
+* Description : Disables communication (STALL) in the pipe specified by the
+* : argument.
+* Arguments : uint16_t pipe ; pipe Number
+* Return Value : none
+*******************************************************************************/
+void usb1_function_set_pid_stall (uint16_t pipe)
+{
+ uint16_t pid;
+
+ pid = usb1_function_get_pid(pipe);
+ if (pid == DEVDRV_USBF_PID_BUF)
+ {
+ switch (pipe)
+ {
+ case USB_FUNCTION_PIPE0:
+ RZA_IO_RegWrite_16(&USB201.DCPCTR,
+ DEVDRV_USBF_PID_STALL2,
+ USB_DCPCTR_PID_SHIFT,
+ USB_DCPCTR_PID);
+ break;
+
+ case USB_FUNCTION_PIPE1:
+ RZA_IO_RegWrite_16(&USB201.PIPE1CTR,
+ DEVDRV_USBF_PID_STALL2,
+ USB_PIPEnCTR_1_5_PID_SHIFT,
+ USB_PIPEnCTR_1_5_PID);
+ break;
+
+ case USB_FUNCTION_PIPE2:
+ RZA_IO_RegWrite_16(&USB201.PIPE2CTR,
+ DEVDRV_USBF_PID_STALL2,
+ USB_PIPEnCTR_1_5_PID_SHIFT,
+ USB_PIPEnCTR_1_5_PID);
+ break;
+
+ case USB_FUNCTION_PIPE3:
+ RZA_IO_RegWrite_16(&USB201.PIPE3CTR,
+ DEVDRV_USBF_PID_STALL2,
+ USB_PIPEnCTR_1_5_PID_SHIFT,
+ USB_PIPEnCTR_1_5_PID);
+ break;
+
+ case USB_FUNCTION_PIPE4:
+ RZA_IO_RegWrite_16(&USB201.PIPE4CTR,
+ DEVDRV_USBF_PID_STALL2,
+ USB_PIPEnCTR_1_5_PID_SHIFT,
+ USB_PIPEnCTR_1_5_PID);
+ break;
+
+ case USB_FUNCTION_PIPE5:
+ RZA_IO_RegWrite_16(&USB201.PIPE5CTR,
+ DEVDRV_USBF_PID_STALL2,
+ USB_PIPEnCTR_1_5_PID_SHIFT,
+ USB_PIPEnCTR_1_5_PID);
+ break;
+
+ case USB_FUNCTION_PIPE6:
+ RZA_IO_RegWrite_16(&USB201.PIPE6CTR,
+ DEVDRV_USBF_PID_STALL2,
+ USB_PIPEnCTR_6_8_PID_SHIFT,
+ USB_PIPEnCTR_6_8_PID);
+ break;
+
+ case USB_FUNCTION_PIPE7:
+ RZA_IO_RegWrite_16(&USB201.PIPE7CTR,
+ DEVDRV_USBF_PID_STALL2,
+ USB_PIPEnCTR_6_8_PID_SHIFT,
+ USB_PIPEnCTR_6_8_PID);
+ break;
+
+ case USB_FUNCTION_PIPE8:
+ RZA_IO_RegWrite_16(&USB201.PIPE8CTR,
+ DEVDRV_USBF_PID_STALL2,
+ USB_PIPEnCTR_6_8_PID_SHIFT,
+ USB_PIPEnCTR_6_8_PID);
+ break;
+
+ case USB_FUNCTION_PIPE9:
+ RZA_IO_RegWrite_16(&USB201.PIPE9CTR,
+ DEVDRV_USBF_PID_STALL2,
+ USB_PIPEnCTR_9_PID_SHIFT,
+ USB_PIPEnCTR_9_PID);
+ break;
+
+ case USB_FUNCTION_PIPEA:
+ RZA_IO_RegWrite_16(&USB201.PIPEACTR,
+ DEVDRV_USBF_PID_STALL2,
+ USB_PIPEnCTR_A_F_PID_SHIFT,
+ USB_PIPEnCTR_A_F_PID);
+ break;
+
+ case USB_FUNCTION_PIPEB:
+ RZA_IO_RegWrite_16(&USB201.PIPEBCTR,
+ DEVDRV_USBF_PID_STALL2,
+ USB_PIPEnCTR_A_F_PID_SHIFT,
+ USB_PIPEnCTR_A_F_PID);
+ break;
+
+ case USB_FUNCTION_PIPEC:
+ RZA_IO_RegWrite_16(&USB201.PIPECCTR,
+ DEVDRV_USBF_PID_STALL2,
+ USB_PIPEnCTR_A_F_PID_SHIFT,
+ USB_PIPEnCTR_A_F_PID);
+ break;
+
+ case USB_FUNCTION_PIPED:
+ RZA_IO_RegWrite_16(&USB201.PIPEDCTR,
+ DEVDRV_USBF_PID_STALL2,
+ USB_PIPEnCTR_A_F_PID_SHIFT,
+ USB_PIPEnCTR_A_F_PID);
+ break;
+
+ case USB_FUNCTION_PIPEE:
+ RZA_IO_RegWrite_16(&USB201.PIPEECTR,
+ DEVDRV_USBF_PID_STALL2,
+ USB_PIPEnCTR_A_F_PID_SHIFT,
+ USB_PIPEnCTR_A_F_PID);
+ break;
+
+ case USB_FUNCTION_PIPEF:
+ RZA_IO_RegWrite_16(&USB201.PIPEFCTR,
+ DEVDRV_USBF_PID_STALL2,
+ USB_PIPEnCTR_A_F_PID_SHIFT,
+ USB_PIPEnCTR_A_F_PID);
+ break;
+
+ default:
+ break;
+ }
+ }
+ else
+ {
+ switch (pipe)
+ {
+ case USB_FUNCTION_PIPE0:
+ RZA_IO_RegWrite_16(&USB201.DCPCTR,
+ DEVDRV_USBF_PID_STALL,
+ USB_DCPCTR_PID_SHIFT,
+ USB_DCPCTR_PID);
+ break;
+
+ case USB_FUNCTION_PIPE1:
+ RZA_IO_RegWrite_16(&USB201.PIPE1CTR,
+ DEVDRV_USBF_PID_STALL,
+ USB_PIPEnCTR_1_5_PID_SHIFT,
+ USB_PIPEnCTR_1_5_PID);
+ break;
+
+ case USB_FUNCTION_PIPE2:
+ RZA_IO_RegWrite_16(&USB201.PIPE2CTR,
+ DEVDRV_USBF_PID_STALL,
+ USB_PIPEnCTR_1_5_PID_SHIFT,
+ USB_PIPEnCTR_1_5_PID);
+ break;
+
+ case USB_FUNCTION_PIPE3:
+ RZA_IO_RegWrite_16(&USB201.PIPE3CTR,
+ DEVDRV_USBF_PID_STALL,
+ USB_PIPEnCTR_1_5_PID_SHIFT,
+ USB_PIPEnCTR_1_5_PID);
+ break;
+
+ case USB_FUNCTION_PIPE4:
+ RZA_IO_RegWrite_16(&USB201.PIPE4CTR,
+ DEVDRV_USBF_PID_STALL,
+ USB_PIPEnCTR_1_5_PID_SHIFT,
+ USB_PIPEnCTR_1_5_PID);
+ break;
+
+ case USB_FUNCTION_PIPE5:
+ RZA_IO_RegWrite_16(&USB201.PIPE5CTR,
+ DEVDRV_USBF_PID_STALL,
+ USB_PIPEnCTR_1_5_PID_SHIFT,
+ USB_PIPEnCTR_1_5_PID);
+ break;
+
+ case USB_FUNCTION_PIPE6:
+ RZA_IO_RegWrite_16(&USB201.PIPE6CTR,
+ DEVDRV_USBF_PID_STALL,
+ USB_PIPEnCTR_6_8_PID_SHIFT,
+ USB_PIPEnCTR_6_8_PID);
+ break;
+
+ case USB_FUNCTION_PIPE7:
+ RZA_IO_RegWrite_16(&USB201.PIPE7CTR,
+ DEVDRV_USBF_PID_STALL,
+ USB_PIPEnCTR_6_8_PID_SHIFT,
+ USB_PIPEnCTR_6_8_PID);
+ break;
+
+ case USB_FUNCTION_PIPE8:
+ RZA_IO_RegWrite_16(&USB201.PIPE8CTR,
+ DEVDRV_USBF_PID_STALL,
+ USB_PIPEnCTR_6_8_PID_SHIFT,
+ USB_PIPEnCTR_6_8_PID);
+ break;
+
+ case USB_FUNCTION_PIPE9:
+ RZA_IO_RegWrite_16(&USB201.PIPE9CTR,
+ DEVDRV_USBF_PID_STALL,
+ USB_PIPEnCTR_9_PID_SHIFT,
+ USB_PIPEnCTR_9_PID);
+ break;
+
+ case USB_FUNCTION_PIPEA:
+ RZA_IO_RegWrite_16(&USB201.PIPEACTR,
+ DEVDRV_USBF_PID_STALL,
+ USB_PIPEnCTR_A_F_PID_SHIFT,
+ USB_PIPEnCTR_A_F_PID);
+ break;
+
+ case USB_FUNCTION_PIPEB:
+ RZA_IO_RegWrite_16(&USB201.PIPEBCTR,
+ DEVDRV_USBF_PID_STALL,
+ USB_PIPEnCTR_A_F_PID_SHIFT,
+ USB_PIPEnCTR_A_F_PID);
+ break;
+
+ case USB_FUNCTION_PIPEC:
+ RZA_IO_RegWrite_16(&USB201.PIPECCTR,
+ DEVDRV_USBF_PID_STALL,
+ USB_PIPEnCTR_A_F_PID_SHIFT,
+ USB_PIPEnCTR_A_F_PID);
+ break;
+
+ case USB_FUNCTION_PIPED:
+ RZA_IO_RegWrite_16(&USB201.PIPEDCTR,
+ DEVDRV_USBF_PID_STALL,
+ USB_PIPEnCTR_A_F_PID_SHIFT,
+ USB_PIPEnCTR_A_F_PID);
+ break;
+
+ case USB_FUNCTION_PIPEE:
+ RZA_IO_RegWrite_16(&USB201.PIPEECTR,
+ DEVDRV_USBF_PID_STALL,
+ USB_PIPEnCTR_A_F_PID_SHIFT,
+ USB_PIPEnCTR_A_F_PID);
+ break;
+
+ case USB_FUNCTION_PIPEF:
+ RZA_IO_RegWrite_16(&USB201.PIPEFCTR,
+ DEVDRV_USBF_PID_STALL,
+ USB_PIPEnCTR_A_F_PID_SHIFT,
+ USB_PIPEnCTR_A_F_PID);
+ break;
+
+ default:
+ break;
+ }
+ }
+}
+
+/*******************************************************************************
+* Function Name: usb1_function_clear_pid_stall
+* Description : Disables communication (NAK) in the pipe specified by the argument.
+* Arguments : uint16_t pipe ; pipe Number
+* Return Value : none
+*******************************************************************************/
+void usb1_function_clear_pid_stall (uint16_t pipe)
+{
+ usb1_function_set_pid_nak(pipe);
+}
+
+/*******************************************************************************
+* Function Name: usb1_function_get_pid
+* Description : Returns the pipe state specified by the argument.
+* Arguments : uint16_t pipe ; Pipe Number
+* Return Value : PID
+*******************************************************************************/
+uint16_t usb1_function_get_pid (uint16_t pipe)
+{
+ uint16_t pid;
+
+ switch (pipe)
+ {
+ case USB_FUNCTION_PIPE0:
+ pid = RZA_IO_RegRead_16(&USB201.DCPCTR,
+ USB_DCPCTR_PID_SHIFT,
+ USB_DCPCTR_PID);
+ break;
+
+ case USB_FUNCTION_PIPE1:
+ pid = RZA_IO_RegRead_16(&USB201.PIPE1CTR,
+ USB_PIPEnCTR_1_5_PID_SHIFT,
+ USB_PIPEnCTR_1_5_PID);
+ break;
+
+ case USB_FUNCTION_PIPE2:
+ pid = RZA_IO_RegRead_16(&USB201.PIPE2CTR,
+ USB_PIPEnCTR_1_5_PID_SHIFT,
+ USB_PIPEnCTR_1_5_PID);
+ break;
+
+ case USB_FUNCTION_PIPE3:
+ pid = RZA_IO_RegRead_16(&USB201.PIPE3CTR,
+ USB_PIPEnCTR_1_5_PID_SHIFT,
+ USB_PIPEnCTR_1_5_PID);
+ break;
+
+ case USB_FUNCTION_PIPE4:
+ pid = RZA_IO_RegRead_16(&USB201.PIPE4CTR,
+ USB_PIPEnCTR_1_5_PID_SHIFT,
+ USB_PIPEnCTR_1_5_PID);
+ break;
+
+ case USB_FUNCTION_PIPE5:
+ pid = RZA_IO_RegRead_16(&USB201.PIPE5CTR,
+ USB_PIPEnCTR_1_5_PID_SHIFT,
+ USB_PIPEnCTR_1_5_PID);
+ break;
+
+ case USB_FUNCTION_PIPE6:
+ pid = RZA_IO_RegRead_16(&USB201.PIPE6CTR,
+ USB_PIPEnCTR_6_8_PID_SHIFT,
+ USB_PIPEnCTR_6_8_PID);
+ break;
+
+ case USB_FUNCTION_PIPE7:
+ pid = RZA_IO_RegRead_16(&USB201.PIPE7CTR,
+ USB_PIPEnCTR_6_8_PID_SHIFT,
+ USB_PIPEnCTR_6_8_PID);
+ break;
+
+ case USB_FUNCTION_PIPE8:
+ pid = RZA_IO_RegRead_16(&USB201.PIPE8CTR,
+ USB_PIPEnCTR_6_8_PID_SHIFT,
+ USB_PIPEnCTR_6_8_PID);
+ break;
+
+ case USB_FUNCTION_PIPE9:
+ pid = RZA_IO_RegRead_16(&USB201.PIPE9CTR,
+ USB_PIPEnCTR_9_PID_SHIFT,
+ USB_PIPEnCTR_9_PID);
+ break;
+
+ case USB_FUNCTION_PIPEA:
+ pid = RZA_IO_RegRead_16(&USB201.PIPEACTR,
+ USB_PIPEnCTR_A_F_PID_SHIFT,
+ USB_PIPEnCTR_A_F_PID);
+ break;
+
+ case USB_FUNCTION_PIPEB:
+ pid = RZA_IO_RegRead_16(&USB201.PIPEBCTR,
+ USB_PIPEnCTR_A_F_PID_SHIFT,
+ USB_PIPEnCTR_A_F_PID);
+ break;
+
+ case USB_FUNCTION_PIPEC:
+ pid = RZA_IO_RegRead_16(&USB201.PIPECCTR,
+ USB_PIPEnCTR_A_F_PID_SHIFT,
+ USB_PIPEnCTR_A_F_PID);
+ break;
+
+ case USB_FUNCTION_PIPED:
+ pid = RZA_IO_RegRead_16(&USB201.PIPEDCTR,
+ USB_PIPEnCTR_A_F_PID_SHIFT,
+ USB_PIPEnCTR_A_F_PID);
+ break;
+
+ case USB_FUNCTION_PIPEE:
+ pid = RZA_IO_RegRead_16(&USB201.PIPEECTR,
+ USB_PIPEnCTR_A_F_PID_SHIFT,
+ USB_PIPEnCTR_A_F_PID);
+ break;
+
+ case USB_FUNCTION_PIPEF:
+ pid = RZA_IO_RegRead_16(&USB201.PIPEFCTR,
+ USB_PIPEnCTR_A_F_PID_SHIFT,
+ USB_PIPEnCTR_A_F_PID);
+ break;
+
+ default:
+ pid = 0;
+ break;
+ }
+
+ return pid;
+}
+
+/*******************************************************************************
+* Function Name: usb1_function_set_csclr
+* Description : CSPLIT status clear setting of sprit transaction in specified
+* : pipe is performed.
+* : When SQSET bit or SQCLR bit, and SQSET bit or SQCLR bit
+* : in DCPCTR register are continuously changed (when the sequence
+* : toggle bit of data PID is continuously changed over two or more pipes),
+* : the access cycle with 120 ns and more than 5 cycle bus clock is necessary.
+* : Do not set both SQCLR bit and SQSET bit to 1 at the same time.
+* : In addition, both bits should be operated after PID is set to NAK.
+* : However, when it is set to the isochronous transfer as the transfer type
+* : (TYPE=11), writing in SQSET bit is disabled.
+* Arguments : uint16_t pipe ; Pipe number
+* Return Value : none
+*******************************************************************************/
+void usb1_function_set_csclr (uint16_t pipe)
+{
+ switch (pipe)
+ {
+ case USB_FUNCTION_PIPE0:
+ RZA_IO_RegWrite_16(&USB201.DCPCTR,
+ 1,
+ USB_DCPCTR_CSCLR_SHIFT,
+ USB_DCPCTR_CSCLR);
+ break;
+
+ case USB_FUNCTION_PIPE1:
+ RZA_IO_RegWrite_16(&USB201.PIPE1CTR,
+ 1,
+ USB_PIPEnCTR_1_5_CSCLR_SHIFT,
+ USB_PIPEnCTR_1_5_CSCLR);
+ break;
+
+ case USB_FUNCTION_PIPE2:
+ RZA_IO_RegWrite_16(&USB201.PIPE2CTR,
+ 1,
+ USB_PIPEnCTR_1_5_CSCLR_SHIFT,
+ USB_PIPEnCTR_1_5_CSCLR);
+ break;
+
+ case USB_FUNCTION_PIPE3:
+ RZA_IO_RegWrite_16(&USB201.PIPE3CTR,
+ 1,
+ USB_PIPEnCTR_1_5_CSCLR_SHIFT,
+ USB_PIPEnCTR_1_5_CSCLR);
+ break;
+
+ case USB_FUNCTION_PIPE4:
+ RZA_IO_RegWrite_16(&USB201.PIPE4CTR,
+ 1,
+ USB_PIPEnCTR_1_5_CSCLR_SHIFT,
+ USB_PIPEnCTR_1_5_CSCLR);
+ break;
+
+ case USB_FUNCTION_PIPE5:
+ RZA_IO_RegWrite_16(&USB201.PIPE5CTR,
+ 1,
+ USB_PIPEnCTR_1_5_CSCLR_SHIFT,
+ USB_PIPEnCTR_1_5_CSCLR);
+ break;
+
+ case USB_FUNCTION_PIPE6:
+ RZA_IO_RegWrite_16(&USB201.PIPE6CTR,
+ 1,
+ USB_PIPEnCTR_6_8_CSCLR_SHIFT,
+ USB_PIPEnCTR_6_8_CSCLR);
+ break;
+
+ case USB_FUNCTION_PIPE7:
+ RZA_IO_RegWrite_16(&USB201.PIPE7CTR,
+ 1,
+ USB_PIPEnCTR_6_8_CSCLR_SHIFT,
+ USB_PIPEnCTR_6_8_CSCLR);
+ break;
+
+ case USB_FUNCTION_PIPE8:
+ RZA_IO_RegWrite_16(&USB201.PIPE8CTR,
+ 1,
+ USB_PIPEnCTR_6_8_CSCLR_SHIFT,
+ USB_PIPEnCTR_6_8_CSCLR);
+ break;
+
+ case USB_FUNCTION_PIPE9:
+ RZA_IO_RegWrite_16(&USB201.PIPE9CTR,
+ 1,
+ USB_PIPEnCTR_9_CSCLR_SHIFT,
+ USB_PIPEnCTR_9_CSCLR);
+ break;
+
+ default:
+ /* PIPEA-F have not CSCLR */
+ break;
+ }
+}
+
+/*******************************************************************************
+* Function Name: usb1_function_set_sqclr
+* Description : Sets the sequence bit of the pipe specified by the argument to
+* : DATA0.
+* Arguments : uint16_t pipe ; Pipe Number
+* Return Value : none
+*******************************************************************************/
+void usb1_function_set_sqclr (uint16_t pipe)
+{
+ switch (pipe)
+ {
+ case USB_FUNCTION_PIPE0:
+ RZA_IO_RegWrite_16(&USB201.DCPCTR,
+ 1,
+ USB_DCPCTR_SQCLR_SHIFT,
+ USB_DCPCTR_SQCLR);
+ break;
+
+ case USB_FUNCTION_PIPE1:
+ RZA_IO_RegWrite_16(&USB201.PIPE1CTR,
+ 1,
+ USB_PIPEnCTR_1_5_SQCLR_SHIFT,
+ USB_PIPEnCTR_1_5_SQCLR);
+ break;
+
+ case USB_FUNCTION_PIPE2:
+ RZA_IO_RegWrite_16(&USB201.PIPE2CTR,
+ 1,
+ USB_PIPEnCTR_1_5_SQCLR_SHIFT,
+ USB_PIPEnCTR_1_5_SQCLR);
+ break;
+
+ case USB_FUNCTION_PIPE3:
+ RZA_IO_RegWrite_16(&USB201.PIPE3CTR,
+ 1,
+ USB_PIPEnCTR_1_5_SQCLR_SHIFT,
+ USB_PIPEnCTR_1_5_SQCLR);
+ break;
+
+ case USB_FUNCTION_PIPE4:
+ RZA_IO_RegWrite_16(&USB201.PIPE4CTR,
+ 1,
+ USB_PIPEnCTR_1_5_SQCLR_SHIFT,
+ USB_PIPEnCTR_1_5_SQCLR);
+ break;
+
+ case USB_FUNCTION_PIPE5:
+ RZA_IO_RegWrite_16(&USB201.PIPE5CTR,
+ 1,
+ USB_PIPEnCTR_1_5_SQCLR_SHIFT,
+ USB_PIPEnCTR_1_5_SQCLR);
+ break;
+
+ case USB_FUNCTION_PIPE6:
+ RZA_IO_RegWrite_16(&USB201.PIPE6CTR,
+ 1,
+ USB_PIPEnCTR_6_8_SQCLR_SHIFT,
+ USB_PIPEnCTR_6_8_SQCLR);
+ break;
+
+ case USB_FUNCTION_PIPE7:
+ RZA_IO_RegWrite_16(&USB201.PIPE7CTR,
+ 1,
+ USB_PIPEnCTR_6_8_SQCLR_SHIFT,
+ USB_PIPEnCTR_6_8_SQCLR);
+ break;
+
+ case USB_FUNCTION_PIPE8:
+ RZA_IO_RegWrite_16(&USB201.PIPE8CTR,
+ 1,
+ USB_PIPEnCTR_6_8_SQCLR_SHIFT,
+ USB_PIPEnCTR_6_8_SQCLR);
+ break;
+
+ case USB_FUNCTION_PIPE9:
+ RZA_IO_RegWrite_16(&USB201.PIPE9CTR,
+ 1,
+ USB_PIPEnCTR_9_SQCLR_SHIFT,
+ USB_PIPEnCTR_9_SQCLR);
+ break;
+
+ case USB_FUNCTION_PIPEA:
+ RZA_IO_RegWrite_16(&USB201.PIPEACTR,
+ 1,
+ USB_PIPEnCTR_A_F_SQCLR_SHIFT,
+ USB_PIPEnCTR_A_F_SQCLR);
+ break;
+
+ case USB_FUNCTION_PIPEB:
+ RZA_IO_RegWrite_16(&USB201.PIPEBCTR,
+ 1,
+ USB_PIPEnCTR_A_F_SQCLR_SHIFT,
+ USB_PIPEnCTR_A_F_SQCLR);
+ break;
+
+ case USB_FUNCTION_PIPEC:
+ RZA_IO_RegWrite_16(&USB201.PIPECCTR,
+ 1,
+ USB_PIPEnCTR_A_F_SQCLR_SHIFT,
+ USB_PIPEnCTR_A_F_SQCLR);
+ break;
+
+ case USB_FUNCTION_PIPED:
+ RZA_IO_RegWrite_16(&USB201.PIPEDCTR,
+ 1,
+ USB_PIPEnCTR_A_F_SQCLR_SHIFT,
+ USB_PIPEnCTR_A_F_SQCLR);
+ break;
+
+ case USB_FUNCTION_PIPEE:
+ RZA_IO_RegWrite_16(&USB201.PIPEECTR,
+ 1,
+ USB_PIPEnCTR_A_F_SQCLR_SHIFT,
+ USB_PIPEnCTR_A_F_SQCLR);
+ break;
+
+ case USB_FUNCTION_PIPEF:
+ RZA_IO_RegWrite_16(&USB201.PIPEFCTR,
+ 1,
+ USB_PIPEnCTR_A_F_SQCLR_SHIFT,
+ USB_PIPEnCTR_A_F_SQCLR);
+ break;
+
+ default:
+ break;
+ }
+}
+
+/*******************************************************************************
+* Function Name: usb1_function_set_sqset
+* Description : Sets the sequence bit of the pipe specified by the argument to
+* : DATA1.
+* Arguments : uint16_t pipe ; Pipe number
+* Return Value : none
+*******************************************************************************/
+void usb1_function_set_sqset (uint16_t pipe)
+{
+ switch (pipe)
+ {
+ case USB_FUNCTION_PIPE0:
+ RZA_IO_RegWrite_16(&USB201.DCPCTR,
+ 1,
+ USB_DCPCTR_SQSET_SHIFT,
+ USB_DCPCTR_SQSET);
+ break;
+
+ case USB_FUNCTION_PIPE1:
+ RZA_IO_RegWrite_16(&USB201.PIPE1CTR,
+ 1,
+ USB_PIPEnCTR_1_5_SQSET_SHIFT,
+ USB_PIPEnCTR_1_5_SQSET);
+ break;
+
+ case USB_FUNCTION_PIPE2:
+ RZA_IO_RegWrite_16(&USB201.PIPE2CTR,
+ 1,
+ USB_PIPEnCTR_1_5_SQSET_SHIFT,
+ USB_PIPEnCTR_1_5_SQSET);
+ break;
+
+ case USB_FUNCTION_PIPE3:
+ RZA_IO_RegWrite_16(&USB201.PIPE3CTR,
+ 1,
+ USB_PIPEnCTR_1_5_SQSET_SHIFT,
+ USB_PIPEnCTR_1_5_SQSET);
+ break;
+
+ case USB_FUNCTION_PIPE4:
+ RZA_IO_RegWrite_16(&USB201.PIPE4CTR,
+ 1,
+ USB_PIPEnCTR_1_5_SQSET_SHIFT,
+ USB_PIPEnCTR_1_5_SQSET);
+ break;
+
+ case USB_FUNCTION_PIPE5:
+ RZA_IO_RegWrite_16(&USB201.PIPE5CTR,
+ 1,
+ USB_PIPEnCTR_1_5_SQSET_SHIFT,
+ USB_PIPEnCTR_1_5_SQSET);
+ break;
+
+ case USB_FUNCTION_PIPE6:
+ RZA_IO_RegWrite_16(&USB201.PIPE6CTR,
+ 1,
+ USB_PIPEnCTR_6_8_SQSET_SHIFT,
+ USB_PIPEnCTR_6_8_SQSET);
+ break;
+
+ case USB_FUNCTION_PIPE7:
+ RZA_IO_RegWrite_16(&USB201.PIPE7CTR,
+ 1,
+ USB_PIPEnCTR_6_8_SQSET_SHIFT,
+ USB_PIPEnCTR_6_8_SQSET);
+ break;
+
+ case USB_FUNCTION_PIPE8:
+ RZA_IO_RegWrite_16(&USB201.PIPE8CTR,
+ 1,
+ USB_PIPEnCTR_6_8_SQSET_SHIFT,
+ USB_PIPEnCTR_6_8_SQSET);
+ break;
+
+ case USB_FUNCTION_PIPE9:
+ RZA_IO_RegWrite_16(&USB201.PIPE9CTR,
+ 1,
+ USB_PIPEnCTR_9_SQSET_SHIFT,
+ USB_PIPEnCTR_9_SQSET);
+ break;
+
+ case USB_FUNCTION_PIPEA:
+ RZA_IO_RegWrite_16(&USB201.PIPEACTR,
+ 1,
+ USB_PIPEnCTR_A_F_SQSET_SHIFT,
+ USB_PIPEnCTR_A_F_SQSET);
+ break;
+
+ case USB_FUNCTION_PIPEB:
+ RZA_IO_RegWrite_16(&USB201.PIPEBCTR,
+ 1,
+ USB_PIPEnCTR_A_F_SQSET_SHIFT,
+ USB_PIPEnCTR_A_F_SQSET);
+ break;
+
+ case USB_FUNCTION_PIPEC:
+ RZA_IO_RegWrite_16(&USB201.PIPECCTR,
+ 1,
+ USB_PIPEnCTR_A_F_SQSET_SHIFT,
+ USB_PIPEnCTR_A_F_SQSET);
+ break;
+
+ case USB_FUNCTION_PIPED:
+ RZA_IO_RegWrite_16(&USB201.PIPEDCTR,
+ 1,
+ USB_PIPEnCTR_A_F_SQSET_SHIFT,
+ USB_PIPEnCTR_A_F_SQSET);
+ break;
+
+ case USB_FUNCTION_PIPEE:
+ RZA_IO_RegWrite_16(&USB201.PIPEECTR,
+ 1,
+ USB_PIPEnCTR_A_F_SQSET_SHIFT,
+ USB_PIPEnCTR_A_F_SQSET);
+ break;
+
+ case USB_FUNCTION_PIPEF:
+ RZA_IO_RegWrite_16(&USB201.PIPEFCTR,
+ 1,
+ USB_PIPEnCTR_A_F_SQSET_SHIFT,
+ USB_PIPEnCTR_A_F_SQSET);
+ break;
+
+ default:
+ break;
+ }
+}
+
+/*******************************************************************************
+* Function Name: usb1_function_get_sqmon
+* Description : Toggle bit of specified pipe is obtained
+* Arguments : uint16_t pipe ; Pipe number
+* Return Value : sqmon
+*******************************************************************************/
+uint16_t usb1_function_get_sqmon (uint16_t pipe)
+{
+ uint16_t sqmon;
+
+ switch (pipe)
+ {
+ case USB_FUNCTION_PIPE0:
+ sqmon = RZA_IO_RegRead_16(&USB201.DCPCTR,
+ USB_DCPCTR_SQMON_SHIFT,
+ USB_DCPCTR_SQMON);
+ break;
+
+ case USB_FUNCTION_PIPE1:
+ sqmon = RZA_IO_RegRead_16(&USB201.PIPE1CTR,
+ USB_PIPEnCTR_1_5_SQMON_SHIFT,
+ USB_PIPEnCTR_1_5_SQMON);
+ break;
+
+ case USB_FUNCTION_PIPE2:
+ sqmon = RZA_IO_RegRead_16(&USB201.PIPE2CTR,
+ USB_PIPEnCTR_1_5_SQMON_SHIFT,
+ USB_PIPEnCTR_1_5_SQMON);
+ break;
+
+ case USB_FUNCTION_PIPE3:
+ sqmon = RZA_IO_RegRead_16(&USB201.PIPE3CTR,
+ USB_PIPEnCTR_1_5_SQMON_SHIFT,
+ USB_PIPEnCTR_1_5_SQMON);
+ break;
+
+ case USB_FUNCTION_PIPE4:
+ sqmon = RZA_IO_RegRead_16(&USB201.PIPE4CTR,
+ USB_PIPEnCTR_1_5_SQMON_SHIFT,
+ USB_PIPEnCTR_1_5_SQMON);
+ break;
+
+ case USB_FUNCTION_PIPE5:
+ sqmon = RZA_IO_RegRead_16(&USB201.PIPE5CTR,
+ USB_PIPEnCTR_1_5_SQMON_SHIFT,
+ USB_PIPEnCTR_1_5_SQMON);
+ break;
+
+ case USB_FUNCTION_PIPE6:
+ sqmon = RZA_IO_RegRead_16(&USB201.PIPE6CTR,
+ USB_PIPEnCTR_6_8_SQMON_SHIFT,
+ USB_PIPEnCTR_6_8_SQMON);
+ break;
+
+ case USB_FUNCTION_PIPE7:
+ sqmon = RZA_IO_RegRead_16(&USB201.PIPE7CTR,
+ USB_PIPEnCTR_6_8_SQMON_SHIFT,
+ USB_PIPEnCTR_6_8_SQMON);
+ break;
+
+ case USB_FUNCTION_PIPE8:
+ sqmon = RZA_IO_RegRead_16(&USB201.PIPE8CTR,
+ USB_PIPEnCTR_6_8_SQMON_SHIFT,
+ USB_PIPEnCTR_6_8_SQMON);
+ break;
+
+ case USB_FUNCTION_PIPE9:
+ sqmon = RZA_IO_RegRead_16(&USB201.PIPE9CTR,
+ USB_PIPEnCTR_9_SQMON_SHIFT,
+ USB_PIPEnCTR_9_SQMON);
+ break;
+
+ case USB_FUNCTION_PIPEA:
+ sqmon = RZA_IO_RegRead_16(&USB201.PIPEACTR,
+ USB_PIPEnCTR_A_F_SQMON_SHIFT,
+ USB_PIPEnCTR_A_F_SQMON);
+ break;
+
+ case USB_FUNCTION_PIPEB:
+ sqmon = RZA_IO_RegRead_16(&USB201.PIPEBCTR,
+ USB_PIPEnCTR_A_F_SQMON_SHIFT,
+ USB_PIPEnCTR_A_F_SQMON);
+ break;
+
+ case USB_FUNCTION_PIPEC:
+ sqmon = RZA_IO_RegRead_16(&USB201.PIPECCTR,
+ USB_PIPEnCTR_A_F_SQMON_SHIFT,
+ USB_PIPEnCTR_A_F_SQMON);
+ break;
+
+ case USB_FUNCTION_PIPED:
+ sqmon = RZA_IO_RegRead_16(&USB201.PIPEDCTR,
+ USB_PIPEnCTR_A_F_SQMON_SHIFT,
+ USB_PIPEnCTR_A_F_SQMON);
+ break;
+
+ case USB_FUNCTION_PIPEE:
+ sqmon = RZA_IO_RegRead_16(&USB201.PIPEECTR,
+ USB_PIPEnCTR_A_F_SQMON_SHIFT,
+ USB_PIPEnCTR_A_F_SQMON);
+ break;
+
+ case USB_FUNCTION_PIPEF:
+ sqmon = RZA_IO_RegRead_16(&USB201.PIPEFCTR,
+ USB_PIPEnCTR_A_F_SQMON_SHIFT,
+ USB_PIPEnCTR_A_F_SQMON);
+ break;
+
+ default:
+ sqmon = 0;
+ break;
+ }
+
+ return sqmon;
+}
+
+/*******************************************************************************
+* Function Name: usb1_function_aclrm
+* Description : The buffer of specified pipe is initialized
+* Arguments : uint16_t pipe : Pipe
+* Return Value : none
+*******************************************************************************/
+void usb1_function_aclrm (uint16_t pipe)
+{
+ usb1_function_set_aclrm(pipe);
+ usb1_function_clr_aclrm(pipe);
+}
+
+/*******************************************************************************
+* Function Name: usb1_function_set_aclrm
+* Description : The auto buffer clear mode of specified pipe is enabled
+* Arguments : uint16_t pipe : Pipe
+* Return Value : none
+*******************************************************************************/
+void usb1_function_set_aclrm (uint16_t pipe)
+{
+ switch (pipe)
+ {
+ case USB_FUNCTION_PIPE0:
+ break;
+
+ case USB_FUNCTION_PIPE1:
+ RZA_IO_RegWrite_16(&USB201.PIPE1CTR,
+ 1,
+ USB_PIPEnCTR_1_5_ACLRM_SHIFT,
+ USB_PIPEnCTR_1_5_ACLRM);
+ break;
+
+ case USB_FUNCTION_PIPE2:
+ RZA_IO_RegWrite_16(&USB201.PIPE2CTR,
+ 1,
+ USB_PIPEnCTR_1_5_ACLRM_SHIFT,
+ USB_PIPEnCTR_1_5_ACLRM);
+ break;
+
+ case USB_FUNCTION_PIPE3:
+ RZA_IO_RegWrite_16(&USB201.PIPE3CTR,
+ 1,
+ USB_PIPEnCTR_1_5_ACLRM_SHIFT,
+ USB_PIPEnCTR_1_5_ACLRM);
+ break;
+
+ case USB_FUNCTION_PIPE4:
+ RZA_IO_RegWrite_16(&USB201.PIPE4CTR,
+ 1,
+ USB_PIPEnCTR_1_5_ACLRM_SHIFT,
+ USB_PIPEnCTR_1_5_ACLRM);
+ break;
+
+ case USB_FUNCTION_PIPE5:
+ RZA_IO_RegWrite_16(&USB201.PIPE5CTR,
+ 1,
+ USB_PIPEnCTR_1_5_ACLRM_SHIFT,
+ USB_PIPEnCTR_1_5_ACLRM);
+ break;
+
+ case USB_FUNCTION_PIPE6:
+ RZA_IO_RegWrite_16(&USB201.PIPE6CTR,
+ 1,
+ USB_PIPEnCTR_6_8_ACLRM_SHIFT,
+ USB_PIPEnCTR_6_8_ACLRM);
+ break;
+
+ case USB_FUNCTION_PIPE7:
+ RZA_IO_RegWrite_16(&USB201.PIPE7CTR,
+ 1,
+ USB_PIPEnCTR_6_8_ACLRM_SHIFT,
+ USB_PIPEnCTR_6_8_ACLRM);
+ break;
+
+ case USB_FUNCTION_PIPE8:
+ RZA_IO_RegWrite_16(&USB201.PIPE8CTR,
+ 1,
+ USB_PIPEnCTR_6_8_ACLRM_SHIFT,
+ USB_PIPEnCTR_6_8_ACLRM);
+ break;
+
+ case USB_FUNCTION_PIPE9:
+ RZA_IO_RegWrite_16(&USB201.PIPE9CTR,
+ 1,
+ USB_PIPEnCTR_9_ACLRM_SHIFT,
+ USB_PIPEnCTR_9_ACLRM);
+ break;
+
+ case USB_FUNCTION_PIPEA:
+ RZA_IO_RegWrite_16(&USB201.PIPEACTR,
+ 1,
+ USB_PIPEnCTR_A_F_ACLRM_SHIFT,
+ USB_PIPEnCTR_A_F_ACLRM);
+ break;
+
+ case USB_FUNCTION_PIPEB:
+ RZA_IO_RegWrite_16(&USB201.PIPEBCTR,
+ 1,
+ USB_PIPEnCTR_A_F_ACLRM_SHIFT,
+ USB_PIPEnCTR_A_F_ACLRM);
+ break;
+
+ case USB_FUNCTION_PIPEC:
+ RZA_IO_RegWrite_16(&USB201.PIPECCTR,
+ 1,
+ USB_PIPEnCTR_A_F_ACLRM_SHIFT,
+ USB_PIPEnCTR_A_F_ACLRM);
+ break;
+
+ case USB_FUNCTION_PIPED:
+ RZA_IO_RegWrite_16(&USB201.PIPEDCTR,
+ 1,
+ USB_PIPEnCTR_A_F_ACLRM_SHIFT,
+ USB_PIPEnCTR_A_F_ACLRM);
+ break;
+
+ case USB_FUNCTION_PIPEE:
+ RZA_IO_RegWrite_16(&USB201.PIPEECTR,
+ 1,
+ USB_PIPEnCTR_A_F_ACLRM_SHIFT,
+ USB_PIPEnCTR_A_F_ACLRM);
+ break;
+
+ case USB_FUNCTION_PIPEF:
+ RZA_IO_RegWrite_16(&USB201.PIPEFCTR,
+ 1,
+ USB_PIPEnCTR_A_F_ACLRM_SHIFT,
+ USB_PIPEnCTR_A_F_ACLRM);
+ break;
+
+ default:
+ break;
+ }
+}
+
+/*******************************************************************************
+* Function Name: usb1_function_clr_aclrm
+* Description : The auto buffer clear mode of specified pipe is enabled
+* Arguments : uint16_t pipe : Pipe
+* Return Value : none
+*******************************************************************************/
+void usb1_function_clr_aclrm (uint16_t pipe)
+{
+ switch (pipe)
+ {
+ case USB_FUNCTION_PIPE0:
+ break;
+
+ case USB_FUNCTION_PIPE1:
+ RZA_IO_RegWrite_16(&USB201.PIPE1CTR,
+ 0,
+ USB_PIPEnCTR_1_5_ACLRM_SHIFT,
+ USB_PIPEnCTR_1_5_ACLRM);
+ break;
+
+ case USB_FUNCTION_PIPE2:
+ RZA_IO_RegWrite_16(&USB201.PIPE2CTR,
+ 0,
+ USB_PIPEnCTR_1_5_ACLRM_SHIFT,
+ USB_PIPEnCTR_1_5_ACLRM);
+ break;
+
+ case USB_FUNCTION_PIPE3:
+ RZA_IO_RegWrite_16(&USB201.PIPE3CTR,
+ 0,
+ USB_PIPEnCTR_1_5_ACLRM_SHIFT,
+ USB_PIPEnCTR_1_5_ACLRM);
+ break;
+
+ case USB_FUNCTION_PIPE4:
+ RZA_IO_RegWrite_16(&USB201.PIPE4CTR,
+ 0,
+ USB_PIPEnCTR_1_5_ACLRM_SHIFT,
+ USB_PIPEnCTR_1_5_ACLRM);
+ break;
+
+ case USB_FUNCTION_PIPE5:
+ RZA_IO_RegWrite_16(&USB201.PIPE5CTR,
+ 0,
+ USB_PIPEnCTR_1_5_ACLRM_SHIFT,
+ USB_PIPEnCTR_1_5_ACLRM);
+ break;
+
+ case USB_FUNCTION_PIPE6:
+ RZA_IO_RegWrite_16(&USB201.PIPE6CTR,
+ 0,
+ USB_PIPEnCTR_6_8_ACLRM_SHIFT,
+ USB_PIPEnCTR_6_8_ACLRM);
+ break;
+
+ case USB_FUNCTION_PIPE7:
+ RZA_IO_RegWrite_16(&USB201.PIPE7CTR,
+ 0,
+ USB_PIPEnCTR_6_8_ACLRM_SHIFT,
+ USB_PIPEnCTR_6_8_ACLRM);
+ break;
+
+ case USB_FUNCTION_PIPE8:
+ RZA_IO_RegWrite_16(&USB201.PIPE8CTR,
+ 0,
+ USB_PIPEnCTR_6_8_ACLRM_SHIFT,
+ USB_PIPEnCTR_6_8_ACLRM);
+ break;
+
+ case USB_FUNCTION_PIPE9:
+ RZA_IO_RegWrite_16(&USB201.PIPE9CTR,
+ 0,
+ USB_PIPEnCTR_9_ACLRM_SHIFT,
+ USB_PIPEnCTR_9_ACLRM);
+ break;
+
+ case USB_FUNCTION_PIPEA:
+ RZA_IO_RegWrite_16(&USB201.PIPEACTR,
+ 0,
+ USB_PIPEnCTR_A_F_ACLRM_SHIFT,
+ USB_PIPEnCTR_A_F_ACLRM);
+ break;
+
+ case USB_FUNCTION_PIPEB:
+ RZA_IO_RegWrite_16(&USB201.PIPEBCTR,
+ 0,
+ USB_PIPEnCTR_A_F_ACLRM_SHIFT,
+ USB_PIPEnCTR_A_F_ACLRM);
+ break;
+
+ case USB_FUNCTION_PIPEC:
+ RZA_IO_RegWrite_16(&USB201.PIPECCTR,
+ 0,
+ USB_PIPEnCTR_A_F_ACLRM_SHIFT,
+ USB_PIPEnCTR_A_F_ACLRM);
+ break;
+
+ case USB_FUNCTION_PIPED:
+ RZA_IO_RegWrite_16(&USB201.PIPEDCTR,
+ 0,
+ USB_PIPEnCTR_A_F_ACLRM_SHIFT,
+ USB_PIPEnCTR_A_F_ACLRM);
+ break;
+
+ case USB_FUNCTION_PIPEE:
+ RZA_IO_RegWrite_16(&USB201.PIPEECTR,
+ 0,
+ USB_PIPEnCTR_A_F_ACLRM_SHIFT,
+ USB_PIPEnCTR_A_F_ACLRM);
+ break;
+
+ case USB_FUNCTION_PIPEF:
+ RZA_IO_RegWrite_16(&USB201.PIPEFCTR,
+ 0,
+ USB_PIPEnCTR_A_F_ACLRM_SHIFT,
+ USB_PIPEnCTR_A_F_ACLRM);
+ break;
+
+ default:
+ break;
+ }
+}
+
+/*******************************************************************************
+* Function Name: usb1_function_get_inbuf
+* Description : Returns INBUFM of the pipe specified by the argument.
+* Arguments : uint16_t pipe ; Pipe Number
+* Return Value : inbuf
+*******************************************************************************/
+uint16_t usb1_function_get_inbuf (uint16_t pipe)
+{
+ uint16_t inbuf;
+
+ switch (pipe)
+ {
+ case USB_FUNCTION_PIPE0:
+ inbuf = 0;
+ break;
+
+ case USB_FUNCTION_PIPE1:
+ inbuf = RZA_IO_RegRead_16(&USB201.PIPE1CTR,
+ USB_PIPEnCTR_1_5_INBUFM_SHIFT,
+ USB_PIPEnCTR_1_5_INBUFM);
+ break;
+
+ case USB_FUNCTION_PIPE2:
+ inbuf = RZA_IO_RegRead_16(&USB201.PIPE2CTR,
+ USB_PIPEnCTR_1_5_INBUFM_SHIFT,
+ USB_PIPEnCTR_1_5_INBUFM);
+ break;
+
+ case USB_FUNCTION_PIPE3:
+ inbuf = RZA_IO_RegRead_16(&USB201.PIPE3CTR,
+ USB_PIPEnCTR_1_5_INBUFM_SHIFT,
+ USB_PIPEnCTR_1_5_INBUFM);
+ break;
+
+ case USB_FUNCTION_PIPE4:
+ inbuf = RZA_IO_RegRead_16(&USB201.PIPE4CTR,
+ USB_PIPEnCTR_1_5_INBUFM_SHIFT,
+ USB_PIPEnCTR_1_5_INBUFM);
+ break;
+
+ case USB_FUNCTION_PIPE5:
+ inbuf = RZA_IO_RegRead_16(&USB201.PIPE5CTR,
+ USB_PIPEnCTR_1_5_INBUFM_SHIFT,
+ USB_PIPEnCTR_1_5_INBUFM);
+ break;
+
+ case USB_FUNCTION_PIPE6:
+ inbuf = 0;
+ break;
+
+ case USB_FUNCTION_PIPE7:
+ inbuf = 0;
+ break;
+
+ case USB_FUNCTION_PIPE8:
+ inbuf = 0;
+ break;
+
+ case USB_FUNCTION_PIPE9:
+ inbuf = RZA_IO_RegRead_16(&USB201.PIPE9CTR,
+ USB_PIPEnCTR_9_INBUFM_SHIFT,
+ USB_PIPEnCTR_9_INBUFM);
+ break;
+
+ case USB_FUNCTION_PIPEA:
+ inbuf = RZA_IO_RegRead_16(&USB201.PIPEACTR,
+ USB_PIPEnCTR_A_F_INBUFM_SHIFT,
+ USB_PIPEnCTR_A_F_INBUFM);
+ break;
+
+ case USB_FUNCTION_PIPEB:
+ inbuf = RZA_IO_RegRead_16(&USB201.PIPEBCTR,
+ USB_PIPEnCTR_A_F_INBUFM_SHIFT,
+ USB_PIPEnCTR_A_F_INBUFM);
+ break;
+
+ case USB_FUNCTION_PIPEC:
+ inbuf = RZA_IO_RegRead_16(&USB201.PIPECCTR,
+ USB_PIPEnCTR_A_F_INBUFM_SHIFT,
+ USB_PIPEnCTR_A_F_INBUFM);
+ break;
+
+ case USB_FUNCTION_PIPED:
+ inbuf = RZA_IO_RegRead_16(&USB201.PIPEDCTR,
+ USB_PIPEnCTR_A_F_INBUFM_SHIFT,
+ USB_PIPEnCTR_A_F_INBUFM);
+ break;
+
+ case USB_FUNCTION_PIPEE:
+ inbuf = RZA_IO_RegRead_16(&USB201.PIPEECTR,
+ USB_PIPEnCTR_A_F_INBUFM_SHIFT,
+ USB_PIPEnCTR_A_F_INBUFM);
+ break;
+
+ case USB_FUNCTION_PIPEF:
+ inbuf = RZA_IO_RegRead_16(&USB201.PIPEFCTR,
+ USB_PIPEnCTR_A_F_INBUFM_SHIFT,
+ USB_PIPEnCTR_A_F_INBUFM);
+ break;
+
+ default:
+ inbuf = 0;
+ break;
+ }
+
+ return inbuf;
+}
+
+/*******************************************************************************
+* Function Name: usb1_function_setting_interrupt
+* Description : Sets the USB module interrupt level.
+* Arguments : uint8_t level
+* Return Value : none
+*******************************************************************************/
+#if 0
+void usb1_function_setting_interrupt (uint8_t level)
+{
+ uint16_t d0fifo_dmaintid;
+ uint16_t d1fifo_dmaintid;
+
+ R_INTC_RegistIntFunc(INTC_ID_USBI1, usb1_function_interrupt);
+ R_INTC_SetPriority(INTC_ID_USBI1, level);
+ R_INTC_Enable(INTC_ID_USBI1);
+
+ d0fifo_dmaintid = Userdef_USB_usb1_function_d0fifo_dmaintid();
+
+ if (d0fifo_dmaintid != 0xFFFF)
+ {
+ R_INTC_RegistIntFunc(d0fifo_dmaintid, usb1_function_dma_interrupt_d0fifo);
+ R_INTC_SetPriority(d0fifo_dmaintid, level);
+ R_INTC_Enable(d0fifo_dmaintid);
+ }
+
+ d1fifo_dmaintid = Userdef_USB_usb1_function_d1fifo_dmaintid();
+
+ if (d1fifo_dmaintid != 0xFFFF)
+ {
+ R_INTC_RegistIntFunc(d1fifo_dmaintid, usb1_function_dma_interrupt_d1fifo);
+ R_INTC_SetPriority(d1fifo_dmaintid, level);
+ R_INTC_Enable(d1fifo_dmaintid);
+ }
+}
+#endif
+
+/*******************************************************************************
+* Function Name: usb1_function_reset_module
+* Description : Initializes the USB module.
+* : Enables providing clock to the USB module.
+* : Sets USB bus wait register.
+* Arguments : uint16_t clockmode ; 48MHz ; USBFCLOCK_X1_48MHZ
+* : ; 12MHz ; USBFCLOCK_EXTAL_12MHZ
+* Return Value : none
+*******************************************************************************/
+void usb1_function_reset_module (uint16_t clockmode)
+{
+ /* UPLLE bit is only USB0 */
+ if (RZA_IO_RegRead_16(&USB200.SYSCFG0,
+ USB_SYSCFG_UPLLE_SHIFT,
+ USB_SYSCFG_UPLLE) == 1)
+ {
+ if ((USB200.SYSCFG0 & USB_FUNCTION_BITUCKSEL) != clockmode)
+ {
+ RZA_IO_RegWrite_16(&USB201.SUSPMODE,
+ 0,
+ USB_SUSPMODE_SUSPM_SHIFT,
+ USB_SUSPMODE_SUSPM);
+ RZA_IO_RegWrite_16(&USB200.SUSPMODE,
+ 0,
+ USB_SUSPMODE_SUSPM_SHIFT,
+ USB_SUSPMODE_SUSPM);
+ USB201.SYSCFG0 = 0;
+ USB200.SYSCFG0 = 0;
+ USB200.SYSCFG0 = (USB_FUNCTION_BITUPLLE | clockmode);
+ Userdef_USB_usb1_function_delay_xms(1);
+ RZA_IO_RegWrite_16(&USB200.SUSPMODE,
+ 1,
+ USB_SUSPMODE_SUSPM_SHIFT,
+ USB_SUSPMODE_SUSPM);
+ RZA_IO_RegWrite_16(&USB201.SUSPMODE,
+ 1,
+ USB_SUSPMODE_SUSPM_SHIFT,
+ USB_SUSPMODE_SUSPM);
+ }
+ else
+ {
+ RZA_IO_RegWrite_16(&USB201.SUSPMODE,
+ 0,
+ USB_SUSPMODE_SUSPM_SHIFT,
+ USB_SUSPMODE_SUSPM);
+ Userdef_USB_usb1_function_delay_xms(1);
+ RZA_IO_RegWrite_16(&USB201.SUSPMODE,
+ 1,
+ USB_SUSPMODE_SUSPM_SHIFT,
+ USB_SUSPMODE_SUSPM);
+ }
+ }
+ else
+ {
+ RZA_IO_RegWrite_16(&USB201.SUSPMODE,
+ 0,
+ USB_SUSPMODE_SUSPM_SHIFT,
+ USB_SUSPMODE_SUSPM);
+ RZA_IO_RegWrite_16(&USB200.SUSPMODE,
+ 0,
+ USB_SUSPMODE_SUSPM_SHIFT,
+ USB_SUSPMODE_SUSPM);
+ USB201.SYSCFG0 = 0;
+ USB200.SYSCFG0 = 0;
+ USB200.SYSCFG0 = (USB_FUNCTION_BITUPLLE | clockmode);
+ Userdef_USB_usb1_function_delay_xms(1);
+ RZA_IO_RegWrite_16(&USB200.SUSPMODE,
+ 1,
+ USB_SUSPMODE_SUSPM_SHIFT,
+ USB_SUSPMODE_SUSPM);
+ RZA_IO_RegWrite_16(&USB201.SUSPMODE,
+ 1,
+ USB_SUSPMODE_SUSPM_SHIFT,
+ USB_SUSPMODE_SUSPM);
+ }
+
+ USB201.BUSWAIT = (uint16_t)(USB_FUNCTION_BUSWAIT_05 & USB_FUNCTION_BITBWAIT);
+}
+
+/*******************************************************************************
+* Function Name: usb1_function_get_buf_size
+* Description : Obtains pipe buffer size specified by the argument and
+* : maximum packet size of the USB device in use.
+* : When USB_FUNCTION_PIPE0 is specified by the argument, obtains the maximum
+* : packet size of the USB device using the corresponding pipe.
+* : For the case that USB_FUNCTION_PIPE0 is not assigned by the argument, when the
+* : corresponding pipe is in continuous transfer mode,
+* : obtains the buffer size allocated in the corresponcing pipe,
+* : when incontinuous transfer, obtains maximum packet size.
+* Arguments : uint16_t pipe ; Pipe Number
+* Return Value : Maximum packet size or buffer size
+*******************************************************************************/
+uint16_t usb1_function_get_buf_size (uint16_t pipe)
+{
+ uint16_t size;
+ uint16_t bufsize;
+
+ if (pipe == USB_FUNCTION_PIPE0)
+ {
+ size = RZA_IO_RegRead_16(&USB201.DCPMAXP,
+ USB_DCPMAXP_MXPS_SHIFT,
+ USB_DCPMAXP_MXPS);
+ }
+ else
+ {
+ if (RZA_IO_RegRead_16(&g_usb1_function_pipecfg[pipe], USB_PIPECFG_CNTMD_SHIFT, USB_PIPECFG_CNTMD) == 1)
+ {
+ bufsize = RZA_IO_RegRead_16(&g_usb1_function_pipebuf[pipe], USB_PIPEBUF_BUFSIZE_SHIFT, USB_PIPEBUF_BUFSIZE);
+ size = (uint16_t)((bufsize + 1) * USB_FUNCTION_PIPExBUF);
+ }
+ else
+ {
+ size = RZA_IO_RegRead_16(&g_usb1_function_pipemaxp[pipe], USB_PIPEMAXP_MXPS_SHIFT, USB_PIPEMAXP_MXPS);
+ }
+ }
+ return size;
+}
+
+/*******************************************************************************
+* Function Name: usb1_function_get_mxps
+* Description : Obtains maximum packet size of the USB device using the pipe
+* : specified by the argument.
+* Arguments : uint16_t pipe ; Pipe Number
+* Return Value : Max Packet Size
+*******************************************************************************/
+uint16_t usb1_function_get_mxps (uint16_t pipe)
+{
+ uint16_t size;
+
+ if (pipe == USB_FUNCTION_PIPE0)
+ {
+ size = RZA_IO_RegRead_16(&USB201.DCPMAXP,
+ USB_DCPMAXP_MXPS_SHIFT,
+ USB_DCPMAXP_MXPS);
+ }
+ else
+ {
+ size = RZA_IO_RegRead_16(&g_usb1_function_pipemaxp[pipe], USB_PIPEMAXP_MXPS_SHIFT, USB_PIPEMAXP_MXPS);
+ }
+ return size;
+}
+
+/* End of File */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/USBDevice/TARGET_RENESAS/TARGET_VK_RZ_A1H/usb1/src/function/usb1_function_api.c Fri Apr 29 01:16:25 2016 +0100
@@ -0,0 +1,441 @@
+/*******************************************************************************
+* DISCLAIMER
+* This software is supplied by Renesas Electronics Corporation and is only
+* intended for use with Renesas products. No other uses are authorized. This
+* software is owned by Renesas Electronics Corporation and is protected under
+* all applicable laws, including copyright laws.
+* THIS SOFTWARE IS PROVIDED "AS IS" AND RENESAS MAKES NO WARRANTIES REGARDING
+* THIS SOFTWARE, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING BUT NOT
+* LIMITED TO WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE
+* AND NON-INFRINGEMENT. ALL SUCH WARRANTIES ARE EXPRESSLY DISCLAIMED.
+* TO THE MAXIMUM EXTENT PERMITTED NOT PROHIBITED BY LAW, NEITHER RENESAS
+* ELECTRONICS CORPORATION NOR ANY OF ITS AFFILIATED COMPANIES SHALL BE LIABLE
+* FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR
+* ANY REASON RELATED TO THIS SOFTWARE, EVEN IF RENESAS OR ITS AFFILIATES HAVE
+* BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
+* Renesas reserves the right, without notice, to make changes to this software
+* and to discontinue the availability of this software. By using this software,
+* you agree to the additional terms and conditions found by accessing the
+* following link:
+* http://www.renesas.com/disclaimer
+* Copyright (C) 2012 - 2014 Renesas Electronics Corporation. All rights reserved.
+*******************************************************************************/
+/*******************************************************************************
+* File Name : usb1_function_api.c
+* $Rev: 1116 $
+* $Date:: 2014-07-09 16:29:19 +0900#$
+* Device(s) : RZ/A1H
+* Tool-Chain :
+* OS : None
+* H/W Platform :
+* Description : RZ/A1H R7S72100 USB Sample Program
+* Operation :
+* Limitations :
+*******************************************************************************/
+
+
+/*******************************************************************************
+Includes <System Includes> , "Project Includes"
+*******************************************************************************/
+#include "usb1_function.h"
+#include "dev_drv.h"
+
+
+/*******************************************************************************
+Typedef definitions
+*******************************************************************************/
+
+
+/*******************************************************************************
+Macro definitions
+*******************************************************************************/
+
+
+/*******************************************************************************
+Imported global variables and functions (from other files)
+*******************************************************************************/
+
+
+/*******************************************************************************
+Exported global variables and functions (to be accessed by other files)
+*******************************************************************************/
+
+
+/*******************************************************************************
+Private global variables and functions
+*******************************************************************************/
+
+
+/*******************************************************************************
+* Function Name: usb1_api_function_init
+* Description : Initializes the USB module in the USB function mode.
+* Arguments : uint8_t int_level ; interruput level
+* : uint16_t mode : Speed modes
+* : : USB_FUCNTION_HIGH_SPEED: High-speed device
+* : : USB_FUCNTION_FULL_SPEED: Full-speed device
+* : uint16_t clockmode ; 48MHz ; USBFCLOCK_X1_48MHZ
+* : ; 12MHz ; USBFCLOCK_EXTAL_12MHZ
+* Return Value : none
+*******************************************************************************/
+#if 0
+void usb1_api_function_init (uint8_t int_level, uint16_t mode, uint16_t clockmode)
+{
+ volatile uint8_t dummy_buf;
+
+ CPG.STBCR7 &= 0xfc; /*The clock of USB0/1 modules is permitted */
+ dummy_buf = CPG.STBCR7; /* (Dummy read) */
+
+ usb1_function_setting_interrupt(int_level);
+
+ usb1_function_reset_module(clockmode); /* reset USB module with setting tranciever */
+ /* and HSE=1 */
+
+ usb1_function_init_status(); /* clear variables */
+
+ usb1_function_InitModule(mode); /* select USB Function and Interrupt Enable */
+ /* Detect USB Device to attach or detach */
+}
+#endif
+
+/*******************************************************************************
+* Function Name: usb1_api_function_IsConfigured
+* Description : Checks if the USB device is configured to return the result as
+* : the return value.
+* Arguments : none
+* Return Value : DEVDRV_USBF_YES : Configured & Configured Suspend
+* : DEVDRV_USBF_NO : not Configured
+*******************************************************************************/
+uint16_t usb1_api_function_IsConfigured (void)
+{
+ uint16_t dvst;
+
+ dvst = usb1_function_GetDeviceState();
+
+ if ((dvst == USB_FUNCTION_DVST_CONFIGURED) ||
+ (dvst == USB_FUNCTION_DVST_CONFIGURED_SUSPEND))
+ {
+ return DEVDRV_USBF_YES;
+ }
+
+ return DEVDRV_USBF_NO;
+}
+
+/*******************************************************************************
+* Function Name: usb1_function_GetDeviceState
+* Description : Returns the state of USB device.
+* Arguments : none
+* Return Value : Device States
+*******************************************************************************/
+uint16_t usb1_function_GetDeviceState (void)
+{
+ uint16_t dvsq;
+ uint16_t dvst;
+
+ dvsq = USB201.INTSTS0;
+ switch (dvsq & USB_FUNCTION_BITDVSQ)
+ {
+ case USB_FUNCTION_DS_POWR: /* Power state *//* power-on */
+ dvst = USB_FUNCTION_DVST_POWERED;
+ break;
+
+ case USB_FUNCTION_DS_DFLT: /* Default state *//* bus-reset */
+ dvst = USB_FUNCTION_DVST_DEFAULT;
+ break;
+
+ case USB_FUNCTION_DS_ADDS: /* Address state */
+ dvst = USB_FUNCTION_DVST_ADDRESS;
+ break;
+
+ case USB_FUNCTION_DS_CNFG: /* Configured state */
+ dvst = USB_FUNCTION_DVST_CONFIGURED;
+ break;
+
+ case USB_FUNCTION_DS_SPD_CNFG: /* Configured Suspend state */
+ dvst = USB_FUNCTION_DVST_CONFIGURED_SUSPEND;
+ break;
+
+ case USB_FUNCTION_DS_SPD_POWR: /* Power Suspend state */
+ case USB_FUNCTION_DS_SPD_DFLT: /* Default Suspend state */
+ case USB_FUNCTION_DS_SPD_ADDR: /* Address Suspend state */
+ dvst = USB_FUNCTION_DVST_SUSPEND;
+ break;
+
+ default: /* error */
+ dvst = USB_FUNCTION_DVST_SUSPEND;
+ break;
+ }
+
+ return dvst;
+}
+
+/*******************************************************************************
+* Function Name: usb1_api_function_start_receive_transfer
+* Description : Starts USB data reception using the pipe specified in the argument.
+* : The FIFO for using is set in the pipe definition table.
+* Arguments : uint16_t pipe ; Pipe Number
+* : uint32_t size ; Data Size
+* : uint8_t *data ; Data data Address
+* Return Value : none
+*******************************************************************************/
+void usb1_api_function_start_receive_transfer (uint16_t pipe, uint32_t size, uint8_t * data)
+{
+ usb1_function_start_receive_transfer(pipe, size, data);
+}
+
+/*******************************************************************************
+* Function Name: usb1_api_function_start_send_transfer
+* Description : Starts the USB data communication using pipe specified by the argument.
+* Arguments : uint16_t pipe ; Pipe Number
+* : uint32_t size ; Data Size
+* : uint8_t *data ; Data data Address
+* Return Value : DEVDRV_USBF_WRITEEND ; Write end
+* : DEVDRV_USBF_WRITESHRT ; short data
+* : DEVDRV_USBF_WRITING ; Continue of data write
+* : DEVDRV_USBF_WRITEDMA ; Write DMA
+* : DEVDRV_USBF_FIFOERROR ; FIFO status
+*******************************************************************************/
+uint16_t usb1_api_function_start_send_transfer (uint16_t pipe, uint32_t size, uint8_t * data)
+{
+ uint16_t status;
+
+ status = usb1_function_start_send_transfer(pipe, size, data);
+
+ return status;
+}
+
+/*******************************************************************************
+* Function Name: usb1_api_function_check_pipe_status
+* Description : Starts USB data reception using the pipe specified in the argument.
+* : The FIFO for using is set in the pipe definition table.
+* Arguments : uint16_t pipe ; Pipe Number
+* : uint32_t *size ; Data Size
+* Return Value : Pipe Status
+*******************************************************************************/
+uint16_t usb1_api_function_check_pipe_status (uint16_t pipe, uint32_t * size)
+{
+ if (g_usb1_function_pipe_status[pipe] == DEVDRV_USBF_PIPE_DONE)
+ {
+ *size = g_usb1_function_PipeDataSize[pipe];
+ g_usb1_function_pipe_status[pipe] = DEVDRV_USBF_PIPE_IDLE;
+
+ return DEVDRV_USBF_PIPE_DONE;
+ }
+ else if (g_usb1_function_pipe_status[pipe] == DEVDRV_USBF_PIPE_NORES)
+ {
+ *size = 0;
+ g_usb1_function_pipe_status[pipe] = DEVDRV_USBF_PIPE_IDLE;
+
+ return DEVDRV_USBF_PIPE_NORES;
+ }
+ else if (g_usb1_function_pipe_status[pipe] == DEVDRV_USBF_PIPE_STALL)
+ {
+ *size = 0;
+ g_usb1_function_pipe_status[pipe] = DEVDRV_USBF_PIPE_IDLE;
+
+ return DEVDRV_USBF_PIPE_STALL;
+ }
+ else if (g_usb1_function_pipe_status[pipe] == DEVDRV_USBF_FIFOERROR)
+ {
+ *size = 0;
+ g_usb1_function_pipe_status[pipe] = DEVDRV_USBF_PIPE_IDLE;
+
+ return DEVDRV_USBF_FIFOERROR;
+ }
+ else
+ {
+ /* Do Nothing */
+ }
+
+ return g_usb1_function_pipe_status[pipe];
+}
+
+/*******************************************************************************
+* Function Name: usb1_api_function_clear_pipe_status
+* Description : Starts USB data reception using the pipe specified in the argument.
+* : The FIFO for using is set in the pipe definition table.
+* Arguments : uint16_t pipe ; Pipe Number
+* Return Value : Pipe Status
+*******************************************************************************/
+void usb1_api_function_clear_pipe_status (uint16_t pipe)
+{
+ g_usb1_function_pipe_status[pipe] = DEVDRV_USBF_PIPE_IDLE;
+ g_usb1_function_PipeDataSize[pipe] = 0;
+}
+
+/*******************************************************************************
+* Function Name: usb1_api_function_set_pid_buf
+* Description : Enables communicaqtion in the pipe specified by the argument
+* : (BUF).
+* Arguments : uint16_t pipe ; pipe Number
+* Return Value : none
+*******************************************************************************/
+void usb1_api_function_set_pid_buf (uint16_t pipe)
+{
+ usb1_function_set_pid_buf(pipe);
+}
+
+/*******************************************************************************
+* Function Name: usb1_api_function_set_pid_nak
+* Description : Disables communication (NAK) in the pipe specified by the argument.
+* : When the pipe status was enabling communication (BUF) before
+* : executing before executing this function, waits in the software
+* : until the pipe becomes ready after setting disabled.
+* Arguments : uint16_t pipe ; pipe Number
+* Return Value : none
+*******************************************************************************/
+void usb1_api_function_set_pid_nak (uint16_t pipe)
+{
+ usb1_function_set_pid_nak(pipe);
+}
+
+/*******************************************************************************
+* Function Name: usb1_api_function_set_pid_stall
+* Description : Disables communication (STALL) in the pipe specified by the
+* : argument.
+* Arguments : uint16_t pipe ; pipe Number
+* Return Value : none
+*******************************************************************************/
+void usb1_api_function_set_pid_stall (uint16_t pipe)
+{
+ usb1_function_set_pid_stall(pipe);
+}
+
+/*******************************************************************************
+* Function Name: usb1_api_function_clear_pid_stall
+* Description : Disables communication (NAK) in the pipe specified by the argument.
+* Arguments : uint16_t pipe ; pipe Number
+* Return Value : none
+*******************************************************************************/
+void usb1_api_function_clear_pid_stall (uint16_t pipe)
+{
+ usb1_function_clear_pid_stall(pipe);
+}
+
+/*******************************************************************************
+* Function Name: usb1_api_function_get_pid
+* Description : Returns the pipe state specified by the argument.
+* Arguments : uint16_t pipe ; Pipe Number
+* Return Value : PID
+*******************************************************************************/
+uint16_t usb1_api_function_get_pid (uint16_t pipe)
+{
+ uint16_t pid;
+
+ pid = usb1_function_get_pid(pipe);
+
+ return pid;
+}
+
+/*******************************************************************************
+* Function Name: usb1_api_function_check_stall
+* Description :
+* Arguments : uint16_t pipe ; Pipe Number
+* Return Value : PID
+*******************************************************************************/
+int32_t usb1_api_function_check_stall (uint16_t pipe)
+{
+ uint16_t pid;
+
+ pid = usb1_function_get_pid(pipe);
+
+ if ((pid & DEVDRV_USBF_PID_STALL) == DEVDRV_USBF_PID_STALL)
+ {
+ return DEVDRV_USBF_STALL;
+ }
+
+ return DEVDRV_SUCCESS;
+}
+
+/*******************************************************************************
+* Function Name: usb1_api_function_set_sqclr
+* Description : Sets the sequence bit of the pipe specified by the argument to
+* : DATA0.
+* Arguments : uint16_t pipe ; Pipe Number
+* Return Value : none
+*******************************************************************************/
+void usb1_api_function_set_sqclr (uint16_t pipe)
+{
+ usb1_function_set_sqclr(pipe);
+}
+
+/*******************************************************************************
+* Function Name: usb1_api_function_set_sqset
+* Description : Sets the sequence bit of the pipe specified by the argument to
+* : DATA1.
+* Arguments : uint16_t pipe ; Pipe number
+* Return Value : none
+*******************************************************************************/
+void usb1_api_function_set_sqset (uint16_t pipe)
+{
+ usb1_function_set_sqset(pipe);
+}
+
+/*******************************************************************************
+* Function Name: usb1_api_function_set_csclr
+* Description : CSPLIT status clear setting of sprit transaction in specified
+* : pipe is performed.
+* : When SQSET bit or SQCLR bit, and SQSET bit or SQCLR bit
+* : in DCPCTR register are continuously changed (when the sequence
+* : toggle bit of data PID is continuously changed over two or more pipes),
+* : the access cycle with 120 ns and more than 5 cycle bus clock is necessary.
+* : Do not set both SQCLR bit and SQSET bit to 1 at the same time.
+* : In addition, both bits should be operated after PID is set to NAK.
+* : However, when it is set to the isochronous transfer as the transfer type
+* : (TYPE=11), writing in SQSET bit is disabled.
+* Arguments : uint16_t pipe ; Pipe number
+* Return Value : none
+*******************************************************************************/
+void usb1_api_function_set_csclr (uint16_t pipe)
+{
+ usb1_function_set_csclr(pipe);
+}
+
+/*******************************************************************************
+* Function Name: usb1_api_function_set_curpipe
+* Description : Allocates FIF0 specifed by the argument in the pipe assigned
+* : by the argument.
+* Arguments : uint16_t pipe ; Pipe Number
+* : uint16_t fifosel ; Select FIFO
+* : uint16_t isel ; FIFO Access Direction
+* : uint16_t mbw ; FIFO Port Access Bit Width
+* Return Value : none
+*******************************************************************************/
+void usb1_api_function_set_curpipe (uint16_t pipe, uint16_t fifosel, uint16_t isel, uint16_t mbw)
+{
+ usb1_function_set_curpipe(pipe, fifosel, isel, mbw);
+}
+
+/*******************************************************************************
+* Function Name: usb1_api_function_clear_brdy_sts
+* Description : Clear BRDY interrupt status in the pipe spceified by the argument.
+* Arguments : uint16_t pipe ; pipe Number
+* Return Value : none
+*******************************************************************************/
+void usb1_api_function_clear_brdy_sts (uint16_t pipe)
+{
+ usb1_function_clear_brdy_sts(pipe);
+}
+
+/*******************************************************************************
+* Function Name: usb1_api_function_clear_bemp_sts
+* Description : Clear BEMP interrupt status in the pipe spceified by the argument.
+* Arguments : uint16_t pipe ; pipe Number
+* Return Value : none
+*******************************************************************************/
+void usb1_api_function_clear_bemp_sts (uint16_t pipe)
+{
+ usb1_function_clear_bemp_sts(pipe);
+}
+
+/*******************************************************************************
+* Function Name: usb1_api_function_clear_nrdy_sts
+* Description : Clear NRDY interrupt status in the pipe spceified by the argument.
+* Arguments : uint16_t pipe ; pipe Number
+* Return Value : none
+*******************************************************************************/
+void usb1_api_function_clear_nrdy_sts (uint16_t pipe)
+{
+ usb1_function_clear_nrdy_sts(pipe);
+}
+
+/* End of File */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/USBDevice/TARGET_RENESAS/TARGET_VK_RZ_A1H/usb1/src/function/usb1_function_controlrw.c Fri Apr 29 01:16:25 2016 +0100
@@ -0,0 +1,142 @@
+/*******************************************************************************
+* DISCLAIMER
+* This software is supplied by Renesas Electronics Corporation and is only
+* intended for use with Renesas products. No other uses are authorized. This
+* software is owned by Renesas Electronics Corporation and is protected under
+* all applicable laws, including copyright laws.
+* THIS SOFTWARE IS PROVIDED "AS IS" AND RENESAS MAKES NO WARRANTIES REGARDING
+* THIS SOFTWARE, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING BUT NOT
+* LIMITED TO WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE
+* AND NON-INFRINGEMENT. ALL SUCH WARRANTIES ARE EXPRESSLY DISCLAIMED.
+* TO THE MAXIMUM EXTENT PERMITTED NOT PROHIBITED BY LAW, NEITHER RENESAS
+* ELECTRONICS CORPORATION NOR ANY OF ITS AFFILIATED COMPANIES SHALL BE LIABLE
+* FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR
+* ANY REASON RELATED TO THIS SOFTWARE, EVEN IF RENESAS OR ITS AFFILIATES HAVE
+* BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
+* Renesas reserves the right, without notice, to make changes to this software
+* and to discontinue the availability of this software. By using this software,
+* you agree to the additional terms and conditions found by accessing the
+* following link:
+* http://www.renesas.com/disclaimer
+* Copyright (C) 2012 - 2014 Renesas Electronics Corporation. All rights reserved.
+*******************************************************************************/
+/*******************************************************************************
+* File Name : usb1_function_controlrw.c
+* $Rev: 1116 $
+* $Date:: 2014-07-09 16:29:19 +0900#$
+* Device(s) : RZ/A1H
+* Tool-Chain :
+* OS : None
+* H/W Platform :
+* Description : RZ/A1H R7S72100 USB Sample Program
+* Operation :
+* Limitations :
+*******************************************************************************/
+
+
+/*******************************************************************************
+Includes <System Includes> , "Project Includes"
+*******************************************************************************/
+#include "usb1_function.h"
+
+
+/*******************************************************************************
+Typedef definitions
+*******************************************************************************/
+
+
+/*******************************************************************************
+Macro definitions
+*******************************************************************************/
+
+
+/*******************************************************************************
+Imported global variables and functions (from other files)
+*******************************************************************************/
+
+
+/*******************************************************************************
+Exported global variables and functions (to be accessed by other files)
+*******************************************************************************/
+
+
+/*******************************************************************************
+Private global variables and functions
+*******************************************************************************/
+
+
+/*******************************************************************************
+* Function Name: usb1_api_function_CtrlReadStart
+* Description : Executes the USB control read transfer.
+* : USB host controller <- USB device
+* Arguments : uint16_t size ; Data Size
+* : uint8_t *data ; Data Address
+* Return Value : DEVDRV_USBF_WRITEEND ; End of data write
+* : DEVDRV_USBF_WRITESHRT ; End of short data write
+* : DEVDRV_USBF_WRITING ; Continue of data write
+* : DEVDRV_USBF_FIFOERROR ; FIFO access error
+*******************************************************************************/
+uint16_t usb1_api_function_CtrlReadStart (uint32_t size, uint8_t * data)
+{
+ uint16_t status;
+ uint16_t mbw;
+
+ usb1_function_set_pid_nak(USB_FUNCTION_PIPE0);
+
+ g_usb1_function_data_count[USB_FUNCTION_PIPE0] = size;
+ g_usb1_function_data_pointer[USB_FUNCTION_PIPE0] = data;
+
+ mbw = usb1_function_get_mbw(g_usb1_function_data_count[USB_FUNCTION_PIPE0],
+ (uint32_t)g_usb1_function_data_pointer[USB_FUNCTION_PIPE0]);
+ usb1_function_set_curpipe(USB_FUNCTION_PIPE0, USB_FUNCTION_CUSE, USB_FUNCTION_CFIFO_WRITE, mbw);
+ USB201.CFIFOCTR = USB_FUNCTION_BITBCLR;
+
+ status = usb1_function_write_buffer_c(USB_FUNCTION_PIPE0);
+
+ /* Peripheral Control sequence */
+ switch (status)
+ {
+ case DEVDRV_USBF_WRITESHRT: /* End of data write */
+ case DEVDRV_USBF_WRITEEND: /* End of data write (not null) */
+ case DEVDRV_USBF_WRITING: /* Continue of data write */
+ usb1_function_enable_bemp_int(USB_FUNCTION_PIPE0); /* Enable Empty Interrupt */
+ usb1_function_set_pid_buf(USB_FUNCTION_PIPE0); /* Set BUF */
+ break;
+
+ case DEVDRV_USBF_FIFOERROR: /* FIFO access error */
+ break;
+
+ default:
+ break;
+ }
+
+ return status; /* End or Err or Continue */
+}
+
+/*******************************************************************************
+* Function Name: usb1_api_function_CtrlWriteStart
+* Description : Executes the USB control write transfer.
+* : USB host controller -> USB device
+* Arguments : uint16_t size ; Data Size
+* : uint8_t *data ; Data Address
+* Return Value : none
+*******************************************************************************/
+void usb1_api_function_CtrlWriteStart (uint32_t size, uint8_t * data)
+{
+ uint16_t mbw;
+
+ usb1_function_set_pid_nak(USB_FUNCTION_PIPE0);
+
+ g_usb1_function_data_count[USB_FUNCTION_PIPE0] = size;
+ g_usb1_function_data_pointer[USB_FUNCTION_PIPE0] = data;
+
+ mbw = usb1_function_get_mbw(g_usb1_function_data_count[USB_FUNCTION_PIPE0],
+ (uint32_t)g_usb1_function_data_pointer[USB_FUNCTION_PIPE0]);
+ usb1_function_set_curpipe(USB_FUNCTION_PIPE0, USB_FUNCTION_CUSE, USB_FUNCTION_CFIFO_WRITE, mbw);
+ USB201.CFIFOCTR = USB_FUNCTION_BITBCLR;
+
+ usb1_function_enable_brdy_int(USB_FUNCTION_PIPE0);
+ usb1_function_set_pid_buf(USB_FUNCTION_PIPE0);
+}
+
+/* End of File */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/USBDevice/TARGET_RENESAS/TARGET_VK_RZ_A1H/usb1/src/function/usb1_function_global.c Fri Apr 29 01:16:25 2016 +0100
@@ -0,0 +1,144 @@
+/*******************************************************************************
+* DISCLAIMER
+* This software is supplied by Renesas Electronics Corporation and is only
+* intended for use with Renesas products. No other uses are authorized. This
+* software is owned by Renesas Electronics Corporation and is protected under
+* all applicable laws, including copyright laws.
+* THIS SOFTWARE IS PROVIDED "AS IS" AND RENESAS MAKES NO WARRANTIES REGARDING
+* THIS SOFTWARE, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING BUT NOT
+* LIMITED TO WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE
+* AND NON-INFRINGEMENT. ALL SUCH WARRANTIES ARE EXPRESSLY DISCLAIMED.
+* TO THE MAXIMUM EXTENT PERMITTED NOT PROHIBITED BY LAW, NEITHER RENESAS
+* ELECTRONICS CORPORATION NOR ANY OF ITS AFFILIATED COMPANIES SHALL BE LIABLE
+* FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR
+* ANY REASON RELATED TO THIS SOFTWARE, EVEN IF RENESAS OR ITS AFFILIATES HAVE
+* BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
+* Renesas reserves the right, without notice, to make changes to this software
+* and to discontinue the availability of this software. By using this software,
+* you agree to the additional terms and conditions found by accessing the
+* following link:
+* http://www.renesas.com/disclaimer
+* Copyright (C) 2012 - 2014 Renesas Electronics Corporation. All rights reserved.
+*******************************************************************************/
+/*******************************************************************************
+* File Name : usb1_function_global.c
+* $Rev: 1116 $
+* $Date:: 2014-07-09 16:29:19 +0900#$
+* Device(s) : RZ/A1H
+* Tool-Chain :
+* OS : None
+* H/W Platform :
+* Description : RZ/A1H R7S72100 USB Sample Program
+* Operation :
+* Limitations :
+*******************************************************************************/
+
+
+/*******************************************************************************
+Includes <System Includes> , "Project Includes"
+*******************************************************************************/
+#include "usb1_function.h"
+
+
+/*******************************************************************************
+Typedef definitions
+*******************************************************************************/
+
+
+/*******************************************************************************
+Macro definitions
+*******************************************************************************/
+
+
+/*******************************************************************************
+Imported global variables and functions (from other files)
+*******************************************************************************/
+
+
+/*******************************************************************************
+Exported global variables and functions (to be accessed by other files)
+*******************************************************************************/
+
+
+/*******************************************************************************
+Private global variables and functions
+*******************************************************************************/
+const uint16_t g_usb1_function_bit_set[16] =
+{
+ 0x0001, 0x0002, 0x0004, 0x0008,
+ 0x0010, 0x0020, 0x0040, 0x0080,
+ 0x0100, 0x0200, 0x0400, 0x0800,
+ 0x1000, 0x2000, 0x4000, 0x8000
+};
+
+uint32_t g_usb1_function_data_count[USB_FUNCTION_MAX_PIPE_NO + 1];
+uint8_t * g_usb1_function_data_pointer[USB_FUNCTION_MAX_PIPE_NO + 1];
+
+uint16_t g_usb1_function_PipeIgnore[USB_FUNCTION_MAX_PIPE_NO + 1];
+uint16_t g_usb1_function_PipeTbl[USB_FUNCTION_MAX_PIPE_NO + 1];
+uint16_t g_usb1_function_pipe_status[USB_FUNCTION_MAX_PIPE_NO + 1];
+uint32_t g_usb1_function_PipeDataSize[USB_FUNCTION_MAX_PIPE_NO + 1];
+
+USB_FUNCTION_DMA_t g_usb1_function_DmaInfo[2];
+uint16_t g_usb1_function_DmaPipe[2];
+uint16_t g_usb1_function_DmaBval[2];
+uint16_t g_usb1_function_DmaStatus[2];
+
+uint16_t g_usb1_function_CtrZeroLengthFlag;
+
+//uint16_t g_usb1_function_ConfigNum;
+//uint16_t g_usb1_function_Alternate[USB_FUNCTION_ALT_NO];
+//uint16_t g_usb1_function_RemoteWakeupFlag;
+uint16_t g_usb1_function_TestModeFlag;
+uint16_t g_usb1_function_TestModeSelectors;
+
+//uint16_t g_usb1_function_ReqType;
+//uint16_t g_usb1_function_ReqTypeType;
+//uint16_t g_usb1_function_ReqTypeRecip;
+//uint16_t g_usb1_function_ReqRequest;
+//uint16_t g_usb1_function_ReqValue;
+//uint16_t g_usb1_function_ReqIndex;
+//uint16_t g_usb1_function_ReqLength;
+
+//uint16_t g_usb1_function_EPTableIndex[USB_FUNCTION_MAX_EP_NO + 1];
+
+uint16_t g_usb1_function_pipecfg[USB_FUNCTION_MAX_PIPE_NO + 1];
+uint16_t g_usb1_function_pipebuf[USB_FUNCTION_MAX_PIPE_NO + 1];
+uint16_t g_usb1_function_pipemaxp[USB_FUNCTION_MAX_PIPE_NO + 1];
+uint16_t g_usb1_function_pipeperi[USB_FUNCTION_MAX_PIPE_NO + 1];
+
+
+/*******************************************************************************
+* Function Name: usb1_function_init_status
+* Description : Initialization USB Sample Driver Variable.
+* Arguments : none
+* Return Value : none
+*******************************************************************************/
+void usb1_function_init_status (void)
+{
+ uint16_t pipe;
+
+ //g_usb1_function_ConfigNum = 0;
+ //g_usb1_function_RemoteWakeupFlag = DEVDRV_USBF_OFF;
+ g_usb1_function_TestModeFlag = DEVDRV_USBF_OFF;
+ g_usb1_function_CtrZeroLengthFlag = 0;
+
+#if 0
+ usb1_function_clear_alt();
+#endif
+
+ for (pipe = 0; pipe < (USB_FUNCTION_MAX_PIPE_NO + 1); ++pipe)
+ {
+ g_usb1_function_pipe_status[pipe] = DEVDRV_USBF_PIPE_IDLE;
+ g_usb1_function_PipeDataSize[pipe] = 0;
+ g_usb1_function_data_count[pipe] = 0;
+
+ /* pipe configuration in usb1_function_ResetEP() */
+ g_usb1_function_pipecfg[pipe] = 0;
+ g_usb1_function_pipebuf[pipe] = 0;
+ g_usb1_function_pipemaxp[pipe] = 0;
+ g_usb1_function_pipeperi[pipe] = 0;
+ }
+}
+
+/* End of File */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/USBDevice/TARGET_RENESAS/TARGET_VK_RZ_A1H/usb1/src/function/usb1_function_sig.c Fri Apr 29 01:16:25 2016 +0100
@@ -0,0 +1,330 @@
+/*******************************************************************************
+* DISCLAIMER
+* This software is supplied by Renesas Electronics Corporation and is only
+* intended for use with Renesas products. No other uses are authorized. This
+* software is owned by Renesas Electronics Corporation and is protected under
+* all applicable laws, including copyright laws.
+* THIS SOFTWARE IS PROVIDED "AS IS" AND RENESAS MAKES NO WARRANTIES REGARDING
+* THIS SOFTWARE, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING BUT NOT
+* LIMITED TO WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE
+* AND NON-INFRINGEMENT. ALL SUCH WARRANTIES ARE EXPRESSLY DISCLAIMED.
+* TO THE MAXIMUM EXTENT PERMITTED NOT PROHIBITED BY LAW, NEITHER RENESAS
+* ELECTRONICS CORPORATION NOR ANY OF ITS AFFILIATED COMPANIES SHALL BE LIABLE
+* FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR
+* ANY REASON RELATED TO THIS SOFTWARE, EVEN IF RENESAS OR ITS AFFILIATES HAVE
+* BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
+* Renesas reserves the right, without notice, to make changes to this software
+* and to discontinue the availability of this software. By using this software,
+* you agree to the additional terms and conditions found by accessing the
+* following link:
+* http://www.renesas.com/disclaimer
+* Copyright (C) 2012 - 2014 Renesas Electronics Corporation. All rights reserved.
+*******************************************************************************/
+/*******************************************************************************
+* File Name : usb1_function_sig.c
+* $Rev: 1116 $
+* $Date:: 2014-07-09 16:29:19 +0900#$
+* Device(s) : RZ/A1H
+* Tool-Chain :
+* OS : None
+* H/W Platform :
+* Description : RZ/A1H R7S72100 USB Sample Program
+* Operation :
+* Limitations :
+*******************************************************************************/
+
+
+/*******************************************************************************
+Includes <System Includes> , "Project Includes"
+*******************************************************************************/
+#include "usb1_function.h"
+
+
+/*******************************************************************************
+Typedef definitions
+*******************************************************************************/
+
+
+/*******************************************************************************
+Macro definitions
+*******************************************************************************/
+
+
+/*******************************************************************************
+Imported global variables and functions (from other files)
+*******************************************************************************/
+
+
+/*******************************************************************************
+Exported global variables and functions (to be accessed by other files)
+*******************************************************************************/
+static void usb1_function_EnableINTModule(void);
+
+
+/*******************************************************************************
+Private global variables and functions
+*******************************************************************************/
+
+
+/*******************************************************************************
+* Function Name: usb1_function_InitModule
+* Description : Initializes the USB module in the USB function mode.
+* Arguments : uint16_t mode ; USB_FUNCTION_HIGH_SPEED ; Hi-Speed Mode
+* : ; other ; Full-speed Mode
+* Return Value : none
+*******************************************************************************/
+void usb1_function_InitModule (uint16_t mode)
+{
+ RZA_IO_RegWrite_16(&USB201.SYSCFG0,
+ 0,
+ USB_SYSCFG_DCFM_SHIFT,
+ USB_SYSCFG_DCFM); /* USB function */
+
+ /* USB module operation enabled */
+ RZA_IO_RegWrite_16(&USB201.SYSCFG0,
+ 1,
+ USB_SYSCFG_USBE_SHIFT,
+ USB_SYSCFG_USBE);
+
+ if (mode == USB_FUNCTION_HIGH_SPEED)
+ {
+ RZA_IO_RegWrite_16(&USB201.SYSCFG0,
+ 1,
+ USB_SYSCFG_HSE_SHIFT,
+ USB_SYSCFG_HSE); /* Hi-Speed Mode */
+ }
+ else
+ {
+ RZA_IO_RegWrite_16(&USB201.SYSCFG0,
+ 0,
+ USB_SYSCFG_HSE_SHIFT,
+ USB_SYSCFG_HSE);
+ }
+
+ /* for power-on */
+ if (usb1_function_CheckVBUStaus() == DEVDRV_USBF_ON)
+ {
+ usb1_function_EnableINTModule(); /* Interrupt Enable */
+ usb1_function_USB_FUNCTION_Attach(); /* pull-up D+ and open D- */
+ }
+ else
+ {
+ usb1_function_USB_FUNCTION_Detach(); /* USB Detach */
+ /* with Interrupt Enable */
+ }
+}
+
+/*******************************************************************************
+* Function Name: usb1_function_CheckVBUStaus
+* Description : Checks the USB-VBUS state to returns the connection state to
+* : the USB host.
+* Arguments : none
+* Return Value : DEVDRV_USBF_ON : VBUS ON
+* : DEVDRV_USBF_OFF : VBUS OFF
+*******************************************************************************/
+uint16_t usb1_function_CheckVBUStaus (void)
+{
+ uint16_t buf1;
+ uint16_t buf2;
+ uint16_t buf3;
+
+ /* monitor VBUS pins */
+ do
+ {
+ buf1 = RZA_IO_RegRead_16(&USB201.INTSTS0,
+ USB_INTSTS0_VBSTS_SHIFT,
+ USB_INTSTS0_VBSTS);
+ Userdef_USB_usb1_function_delay_10us(1);
+ buf2 = RZA_IO_RegRead_16(&USB201.INTSTS0,
+ USB_INTSTS0_VBSTS_SHIFT,
+ USB_INTSTS0_VBSTS);
+ Userdef_USB_usb1_function_delay_10us(1);
+ buf3 = RZA_IO_RegRead_16(&USB201.INTSTS0,
+ USB_INTSTS0_VBSTS_SHIFT,
+ USB_INTSTS0_VBSTS);
+ } while ((buf1 != buf2) || (buf2 != buf3));
+
+ if (buf1 == DEVDRV_USBF_OFF)
+ {
+ return DEVDRV_USBF_OFF; /* detach */
+ }
+
+ return DEVDRV_USBF_ON; /* attach */
+}
+
+/*******************************************************************************
+* Function Name: usb1_function_USB_FUNCTION_Attach
+* Description : Connects to the USB host controller.
+* : This function pulls up D+.
+* Arguments : none
+* Return Value : none
+*******************************************************************************/
+void usb1_function_USB_FUNCTION_Attach (void)
+{
+ Userdef_USB_usb1_function_attach();
+
+ Userdef_USB_usb1_function_delay_xms(10);
+
+ RZA_IO_RegWrite_16(&USB201.SYSCFG0,
+ 1,
+ USB_SYSCFG_DPRPU_SHIFT,
+ USB_SYSCFG_DPRPU); /* Pull-up D+ and open D- */
+}
+
+/*******************************************************************************
+* Function Name: usb1_function_USB_FUNCTION_Detach
+* Description : Disconnects from the USB host controller.
+* : This function opens D+/D-.
+* Arguments : none
+* Return Value : none
+*******************************************************************************/
+void usb1_function_USB_FUNCTION_Detach (void)
+{
+ uint16_t pipe;
+
+ Userdef_USB_usb1_function_detach();
+
+ for (pipe = 0; pipe < (USB_FUNCTION_MAX_PIPE_NO + 1); ++pipe)
+ {
+ if (g_usb1_function_pipe_status[pipe] != DEVDRV_USBF_PIPE_IDLE)
+ {
+ usb1_function_stop_transfer(pipe);
+ }
+ }
+
+ RZA_IO_RegWrite_16(&USB201.SYSCFG0,
+ 0,
+ USB_SYSCFG_DPRPU_SHIFT,
+ USB_SYSCFG_DPRPU); /* open D+ and D- */
+
+ /* Detach Recovery */
+ Userdef_USB_usb1_function_delay_500ns(); /* need 1us=500ns * 2 wait */
+ Userdef_USB_usb1_function_delay_500ns();
+
+ RZA_IO_RegWrite_16(&USB201.SYSCFG0,
+ 1,
+ USB_SYSCFG_DCFM_SHIFT,
+ USB_SYSCFG_DCFM);
+ Userdef_USB_usb1_function_delay_500ns(); /* need 100ns wait but 500ns S/W wait */
+
+ RZA_IO_RegWrite_16(&USB201.SYSCFG0,
+ 0,
+ USB_SYSCFG_DCFM_SHIFT,
+ USB_SYSCFG_DCFM);
+
+ RZA_IO_RegWrite_16(&USB201.SYSCFG0,
+ 0,
+ USB_SYSCFG_USBE_SHIFT,
+ USB_SYSCFG_USBE); /* soft reset module */
+ Userdef_USB_usb1_function_delay_500ns();
+
+ RZA_IO_RegWrite_16(&USB201.SYSCFG0,
+ 1,
+ USB_SYSCFG_USBE_SHIFT,
+ USB_SYSCFG_USBE);
+
+ usb1_function_EnableINTModule(); /* Interrupt Enable */
+}
+
+/*******************************************************************************
+* Function Name: usb1_function_USB_FUNCTION_BusReset
+* Description : This function is executed when the USB device is transitioned
+* : to POWERD_STATE. Sets the device descriptor according to the
+* : connection speed determined by the USB reset hand shake.
+* Arguments : none
+* Return Value : none
+*******************************************************************************/
+#if 0 /*The USBHAL in mbed does not need this function*/
+void usb1_function_USB_FUNCTION_BusReset (void)
+{
+ usb1_function_init_status(); /* memory clear */
+
+ if (usb1_function_is_hispeed() == USB_FUNCTION_HIGH_SPEED)
+ {
+ usb1_function_ResetDescriptor(USB_FUNCTION_HIGH_SPEED); /* Device Descriptor reset */
+ }
+ else
+ {
+ usb1_function_ResetDescriptor(USB_FUNCTION_FULL_SPEED); /* Device Descriptor reset */
+ }
+
+ usb1_function_ResetDCP(); /* Default Control PIPE reset */
+}
+#endif
+
+/*******************************************************************************
+* Function Name: usb1_function_USB_FUNCTION_Resume
+* Description : This function is executed when the USB device detects a resume
+* : signal.
+* : The USB sample driver does not operate for this function.
+* Arguments : none
+* Return Value : none
+*******************************************************************************/
+#if 0 /*The USBHAL in mbed does not need this function*/
+void usb1_function_USB_FUNCTION_Resume (void)
+{
+ /* NOP */
+}
+#endif
+
+/*******************************************************************************
+* Function Name: usb1_function_USB_FUNCTION_Suspend
+* Description : This function is executed when the USB device detects a suspend
+* : signal.
+* : The USB sample driver does not operate for this function.
+* Arguments : none
+* Return Value : none
+*******************************************************************************/
+#if 0 /*The USBHAL in mbed does not need this function*/
+void usb1_function_USB_FUNCTION_Suspend (void)
+{
+ /* NOP */
+}
+#endif
+
+/*******************************************************************************
+* Function Name: usb1_function_USB_FUNCTION_TestMode
+* Description : This function is executed when the USB device is transitioned U
+* : to TEST_MODE by the USB standard request.
+* Arguments : none
+* Return Value : none
+*******************************************************************************/
+void usb1_function_USB_FUNCTION_TestMode (void)
+{
+ switch (g_usb1_function_TestModeSelectors & USB_FUNCTION_FUNCTION_TEST_SELECT)
+ {
+ case USB_FUNCTION_FUNCTION_TEST_J:
+ case USB_FUNCTION_FUNCTION_TEST_K:
+ case USB_FUNCTION_FUNCTION_TEST_SE0_NAK:
+ case USB_FUNCTION_FUNCTION_TEST_PACKET:
+ RZA_IO_RegWrite_16(&USB201.TESTMODE,
+ (g_usb1_function_TestModeSelectors >> 8),
+ USB_TESTMODE_UTST_SHIFT,
+ USB_TESTMODE_UTST);
+ break;
+
+ case USB_FUNCTION_FUNCTION_TEST_FORCE_ENABLE:
+ default:
+ break;
+ }
+}
+
+/*******************************************************************************
+* Function Name: usb1_function_EnableINTModule
+* Description : Enables USB interrupt.
+* Arguments : none
+* Return Value : none
+*******************************************************************************/
+static void usb1_function_EnableINTModule (void)
+{
+ uint16_t buf;
+
+ buf = USB201.INTENB0;
+ buf |= (USB_FUNCTION_BITVBSE | USB_FUNCTION_BITDVSE | USB_FUNCTION_BITCTRE |
+ USB_FUNCTION_BITBEMPE | USB_FUNCTION_BITNRDYE | USB_FUNCTION_BITBRDYE);
+ USB201.INTENB0 = buf;
+
+ usb1_function_enable_bemp_int(USB_FUNCTION_PIPE0);
+}
+
+/* End of File */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/USBDevice/TARGET_RENESAS/TARGET_VK_RZ_A1H/usb1/src/function/usb1_function_sub.c Fri Apr 29 01:16:25 2016 +0100
@@ -0,0 +1,453 @@
+/*******************************************************************************
+* DISCLAIMER
+* This software is supplied by Renesas Electronics Corporation and is only
+* intended for use with Renesas products. No other uses are authorized. This
+* software is owned by Renesas Electronics Corporation and is protected under
+* all applicable laws, including copyright laws.
+* THIS SOFTWARE IS PROVIDED "AS IS" AND RENESAS MAKES NO WARRANTIES REGARDING
+* THIS SOFTWARE, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING BUT NOT
+* LIMITED TO WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE
+* AND NON-INFRINGEMENT. ALL SUCH WARRANTIES ARE EXPRESSLY DISCLAIMED.
+* TO THE MAXIMUM EXTENT PERMITTED NOT PROHIBITED BY LAW, NEITHER RENESAS
+* ELECTRONICS CORPORATION NOR ANY OF ITS AFFILIATED COMPANIES SHALL BE LIABLE
+* FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR
+* ANY REASON RELATED TO THIS SOFTWARE, EVEN IF RENESAS OR ITS AFFILIATES HAVE
+* BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
+* Renesas reserves the right, without notice, to make changes to this software
+* and to discontinue the availability of this software. By using this software,
+* you agree to the additional terms and conditions found by accessing the
+* following link:
+* http://www.renesas.com/disclaimer
+* Copyright (C) 2012 - 2014 Renesas Electronics Corporation. All rights reserved.
+*******************************************************************************/
+/*******************************************************************************
+* File Name : usb1_function_sub.c
+* $Rev: 1116 $
+* $Date:: 2014-07-09 16:29:19 +0900#$
+* Device(s) : RZ/A1H
+* Tool-Chain :
+* OS : None
+* H/W Platform :
+* Description : RZ/A1H R7S72100 USB Sample Program
+* Operation :
+* Limitations :
+*******************************************************************************/
+
+
+/*******************************************************************************
+Includes <System Includes> , "Project Includes"
+*******************************************************************************/
+#include "usb1_function.h"
+
+
+/*******************************************************************************
+Typedef definitions
+*******************************************************************************/
+
+
+/*******************************************************************************
+Macro definitions
+*******************************************************************************/
+
+
+/*******************************************************************************
+Imported global variables and functions (from other files)
+*******************************************************************************/
+#if 0
+extern const uint16_t *g_usb1_function_EndPntPtr[];
+extern uint8_t g_usb1_function_DeviceDescriptor[];
+extern uint8_t *g_usb1_function_ConfigurationPtr[];
+#endif
+
+
+/*******************************************************************************
+Exported global variables and functions (to be accessed by other files)
+*******************************************************************************/
+
+
+/*******************************************************************************
+Private global variables and functions
+*******************************************************************************/
+
+
+/*******************************************************************************
+* Function Name: usb1_function_ResetDCP
+* Description : Initializes the default control pipe(DCP).
+* Outline : Reset default control pipe
+* Arguments : none
+* Return Value : none
+*******************************************************************************/
+void usb1_function_ResetDCP (void)
+{
+ USB201.DCPCFG = 0;
+#if 0
+ USB201.DCPMAXP = g_usb1_function_DeviceDescriptor[7];
+#else
+ USB201.DCPMAXP = 64;
+#endif
+
+ USB201.CFIFOSEL = (uint16_t)(USB_FUNCTION_BITMBW_8 | USB_FUNCTION_BITBYTE_LITTLE);
+ USB201.D0FIFOSEL = (uint16_t)(USB_FUNCTION_BITMBW_8 | USB_FUNCTION_BITBYTE_LITTLE);
+ USB201.D1FIFOSEL = (uint16_t)(USB_FUNCTION_BITMBW_8 | USB_FUNCTION_BITBYTE_LITTLE);
+}
+
+/*******************************************************************************
+* Function Name: usb1_function_ResetEP
+* Description : Initializes the end point.
+* Arguments : uint16_t num ; Configuration Number
+* Return Value : none
+*******************************************************************************/
+#if 0
+void usb1_function_ResetEP (uint16_t num)
+{
+ uint16_t pipe;
+ uint16_t ep;
+ uint16_t index;
+ uint16_t buf;
+ uint16_t * tbl;
+
+ tbl = (uint16_t *)(g_usb1_function_EndPntPtr[num - 1]);
+
+ for (ep = 1; ep <= USB_FUNCTION_MAX_EP_NO; ++ep)
+ {
+ if (g_usb1_function_EPTableIndex[ep] != USB_FUNCTION_EP_ERROR)
+ {
+ index = (uint16_t)(USB_FUNCTION_EPTABLE_LENGTH * g_usb1_function_EPTableIndex[ep]);
+ pipe = (uint16_t)(tbl[index + 0] & USB_FUNCTION_BITCURPIPE);
+
+ g_usb1_function_PipeTbl[pipe] = (uint16_t)(((tbl[index + 1] & USB_FUNCTION_DIRFIELD) << 3) |
+ ep |
+ (tbl[index + 0] & USB_FUNCTION_FIFO_USE));
+
+ if ((tbl[index + 1] & USB_FUNCTION_DIRFIELD) == USB_FUNCTION_DIR_P_OUT)
+ {
+ tbl[index + 1] |= USB_FUNCTION_SHTNAKON;
+#ifdef __USB_DMA_BFRE_ENABLE__
+ /* this routine cannnot be perfomred if read operation is executed in buffer size */
+ if (((tbl[index + 0] & USB_FUNCTION_FIFO_USE) == USB_FUNCTION_D0FIFO_DMA) ||
+ ((tbl[index + 0] & USB_FUNCTION_FIFO_USE) == USB_FUNCTION_D1FIFO_DMA))
+ {
+ tbl[index + 1] |= USB_FUNCTION_BFREON;
+ }
+#endif
+ }
+
+ /* Interrupt Disable */
+ buf = USB201.BRDYENB;
+ buf &= (uint16_t)~g_usb1_function_bit_set[pipe];
+ USB201.BRDYENB = buf;
+ buf = USB201.NRDYENB;
+ buf &= (uint16_t)~g_usb1_function_bit_set[pipe];
+ USB201.NRDYENB = buf;
+ buf = USB201.BEMPENB;
+ buf &= (uint16_t)~g_usb1_function_bit_set[pipe];
+ USB201.BEMPENB = buf;
+
+ usb1_function_set_pid_nak(pipe);
+
+ /* CurrentPIPE Clear */
+ if (RZA_IO_RegRead_16(&USB201.CFIFOSEL,
+ USB_CFIFOSEL_CURPIPE_SHIFT,
+ USB_CFIFOSEL_CURPIPE) == pipe)
+ {
+ RZA_IO_RegWrite_16(&USB201.CFIFOSEL,
+ 0,
+ USB_CFIFOSEL_CURPIPE_SHIFT,
+ USB_CFIFOSEL_CURPIPE);
+ }
+
+ if (RZA_IO_RegRead_16(&USB201.D0FIFOSEL,
+ USB_DnFIFOSEL_CURPIPE_SHIFT,
+ USB_DnFIFOSEL_CURPIPE) == pipe)
+ {
+ RZA_IO_RegWrite_16(&USB201.D0FIFOSEL,
+ 0,
+ USB_DnFIFOSEL_CURPIPE_SHIFT,
+ USB_DnFIFOSEL_CURPIPE);
+ }
+
+ if (RZA_IO_RegRead_16(&USB201.D1FIFOSEL,
+ USB_DnFIFOSEL_CURPIPE_SHIFT,
+ USB_DnFIFOSEL_CURPIPE) == pipe)
+ {
+ RZA_IO_RegWrite_16(&USB201.D1FIFOSEL,
+ 0,
+ USB_DnFIFOSEL_CURPIPE_SHIFT,
+ USB_DnFIFOSEL_CURPIPE);
+ }
+
+ /* PIPE Configuration */
+ USB201.PIPESEL = pipe;
+ USB201.PIPECFG = tbl[index + 1];
+ USB201.PIPEBUF = tbl[index + 2];
+ USB201.PIPEMAXP = tbl[index + 3];
+ USB201.PIPEPERI = tbl[index + 4];
+
+ g_usb1_function_pipecfg[pipe] = tbl[index + 1];
+ g_usb1_function_pipebuf[pipe] = tbl[index + 2];
+ g_usb1_function_pipemaxp[pipe] = tbl[index + 3];
+ g_usb1_function_pipeperi[pipe] = tbl[index + 4];
+
+ /* Buffer Clear */
+ usb1_function_set_sqclr(pipe);
+ usb1_function_aclrm(pipe);
+
+ /* init Global */
+ g_usb1_function_pipe_status[pipe] = DEVDRV_USBF_PIPE_IDLE;
+ g_usb1_function_PipeDataSize[pipe] = 0;
+ }
+ }
+}
+#endif
+
+/*******************************************************************************
+* Function Name: usb1_function_EpToPipe
+* Description : Returns the pipe which end point specified by the argument is
+* : allocated to.
+* Arguments : uint16_t ep ; Direction + Endpoint Number
+* Return Value : USB_FUNCTION_EP_ERROR : Error
+* : Others : Pipe Number
+*******************************************************************************/
+uint16_t usb1_function_EpToPipe (uint16_t ep)
+{
+ uint16_t pipe;
+
+ for (pipe = 1; pipe <= USB_FUNCTION_MAX_PIPE_NO; pipe++)
+ {
+ if ((g_usb1_function_PipeTbl[pipe] & 0x00ff) == ep)
+ {
+ return pipe;
+ }
+ }
+
+ return USB_FUNCTION_EP_ERROR;
+}
+
+/*******************************************************************************
+* Function Name: usb1_function_InitEPTable
+* Description : Sets the end point by the Alternate setting value of the
+* : configuration number and the interface number specified by the
+* : argument.
+* Arguments : uint16_t Con_Num ; Configuration Number
+* : uint16_t Int_Num ; Interface Number
+* : uint16_t Alt_Num ; Alternate Setting
+* Return Value : none
+*******************************************************************************/
+#if 0
+void usb1_function_InitEPTable (uint16_t Con_Num, uint16_t Int_Num, uint16_t Alt_Num)
+{
+ uint8_t * ptr;
+ uint16_t point_interface;
+ uint16_t point_endpoint;
+ uint16_t length;
+ uint16_t start;
+ uint16_t numbers;
+ uint16_t endpoint;
+
+ ptr = (uint8_t *)g_usb1_function_ConfigurationPtr[Con_Num - 1];
+ point_interface = *ptr;
+ length = (uint16_t)((uint16_t)*(ptr + 3) << 8 | (uint16_t)*(ptr + 2));
+ ptr += *ptr;
+ start = 0;
+ numbers = 0;
+ point_endpoint = 0;
+
+ for (; point_interface < length;)
+ {
+ switch (*(ptr + 1)) /* Descriptor Type ? */
+ {
+ case USB_FUNCTION_DT_INTERFACE: /* Interface */
+ if ((*(ptr + 2) == Int_Num) && (*(ptr + 3) == Alt_Num))
+ {
+ numbers = *(ptr + 4);
+ }
+ else
+ {
+ start += *(ptr + 4);
+ }
+ point_interface += *ptr;
+ ptr += *ptr;
+ break;
+
+ case USB_FUNCTION_DT_ENDPOINT: /* Endpoint */
+ if (point_endpoint < numbers)
+ {
+ endpoint = (uint16_t)(*(ptr + 2) & 0x0f);
+ g_usb1_function_EPTableIndex[endpoint] = (uint16_t)(start + point_endpoint);
+ ++point_endpoint;
+ }
+ point_interface += *ptr;
+ ptr += *ptr;
+ break;
+
+ case USB_FUNCTION_DT_DEVICE: /* Device */
+ case USB_FUNCTION_DT_CONFIGURATION: /* Configuration */
+ case USB_FUNCTION_DT_STRING: /* String */
+ default: /* Class, Vendor, else */
+ point_interface += *ptr;
+ ptr += *ptr;
+ break;
+ }
+ }
+}
+#endif
+
+/*******************************************************************************
+* Function Name: usb1_function_GetConfigNum
+* Description : Returns the number of configuration referring to the number of
+* : configuration described in the device descriptor.
+* Arguments : none
+* Return Value : Number of possible configurations (bNumConfigurations).
+*******************************************************************************/
+#if 0
+uint16_t usb1_function_GetConfigNum (void)
+{
+ return (uint16_t)g_usb1_function_DeviceDescriptor[17];
+}
+#endif
+
+/*******************************************************************************
+* Function Name: usb1_function_GetInterfaceNum
+* Description : Returns the number of interface referring to the number of
+* : interface described in the configuration descriptor.
+* Arguments : uint16_t num ; Configuration Number
+* Return Value : Number of this interface (bNumInterfaces).
+*******************************************************************************/
+#if 0
+uint16_t usb1_function_GetInterfaceNum (uint16_t num)
+{
+ return (uint16_t)(*(g_usb1_function_ConfigurationPtr[num - 1] + 4));
+}
+#endif
+
+/*******************************************************************************
+* Function Name: usb1_function_GetAltNum
+* Description : Returns the Alternate setting value of the configuration number
+* : and the interface number specified by the argument.
+* Arguments : uint16_t Con_Num ; Configuration Number
+* : uint16_t Int_Num ; Interface Number
+* Return Value : Value used to select this alternate setting(bAlternateSetting).
+*******************************************************************************/
+#if 0
+uint16_t usb1_function_GetAltNum (uint16_t Con_Num, uint16_t Int_Num)
+{
+ uint8_t * ptr;
+ uint16_t point;
+ uint16_t alt_num = 0;
+ uint16_t length;
+
+ ptr = (uint8_t *)(g_usb1_function_ConfigurationPtr[Con_Num - 1]);
+ point = ptr[0];
+ ptr += ptr[0]; /* InterfaceDescriptor[0] */
+ length = (uint16_t)(*(g_usb1_function_ConfigurationPtr[Con_Num - 1] + 2));
+ length |= (uint16_t)((uint16_t)(*(g_usb1_function_ConfigurationPtr[Con_Num - 1] + 3)) << 8);
+
+ for (; point < length;) /* Search Descriptor Table size */
+ {
+ switch (ptr[1]) /* Descriptor Type ? */
+ {
+ case USB_FUNCTION_DT_INTERFACE: /* Interface */
+ if (Int_Num == ptr[2])
+ {
+ alt_num = (uint16_t)ptr[3]; /* Alternate Number count */
+ }
+ point += ptr[0];
+ ptr += ptr[0];
+ break;
+
+ case USB_FUNCTION_DT_DEVICE: /* Device */
+ case USB_FUNCTION_DT_CONFIGURATION: /* Configuration */
+ case USB_FUNCTION_DT_STRING: /* String */
+ case USB_FUNCTION_DT_ENDPOINT: /* Endpoint */
+ default: /* Class, Vendor, else */
+ point += ptr[0];
+ ptr += ptr[0];
+ break;
+ }
+ }
+ return alt_num;
+}
+#endif
+
+/*******************************************************************************
+* Function Name: usb1_function_CheckRemoteWakeup
+* Description : Returns the result of the remote wake up function is supported
+* : or not referring to the configuration descriptor.
+* Arguments : none
+* Return Value : DEVDRV_USBF_ON : Support Remote Wakeup
+* : DEVDRV_USBF_OFF : not Support Remote Wakeup
+*******************************************************************************/
+#if 0
+uint16_t usb1_function_CheckRemoteWakeup (void)
+{
+ uint8_t atr;
+
+ if (g_usb1_function_ConfigNum == 0)
+ {
+ return DEVDRV_USBF_OFF;
+ }
+
+ atr = *(g_usb1_function_ConfigurationPtr[g_usb1_function_ConfigNum - 1] + 7);
+
+ if (atr & USB_FUNCTION_CF_RWUP)
+ {
+ return DEVDRV_USBF_ON;
+ }
+
+ return DEVDRV_USBF_OFF;
+}
+#endif
+
+/*******************************************************************************
+* Function Name: usb1_function_clear_alt
+* Description : Initializes the Alternate setting area.
+* Arguments : none
+* Return Value : none
+*******************************************************************************/
+#if 0
+void usb1_function_clear_alt (void)
+{
+ int i;
+
+ for (i = 0; i < USB_FUNCTION_ALT_NO; ++i)
+ {
+ g_usb1_function_Alternate[i] = 0; /* Alternate */
+ }
+}
+#endif
+
+/*******************************************************************************
+* Function Name: usb1_function_clear_pipe_tbl
+* Description : Initializes pipe definition table.
+* Arguments : none
+* Return Value : none
+*******************************************************************************/
+void usb1_function_clear_pipe_tbl (void)
+{
+ int pipe;
+
+ for (pipe = 0; pipe < (USB_FUNCTION_MAX_PIPE_NO + 1); ++pipe)
+ {
+ g_usb1_function_PipeTbl[pipe] = 0;
+ }
+}
+
+/*******************************************************************************
+* Function Name: usb1_function_clear_ep_table_index
+* Description : Initializes the end point table index.
+* Arguments : none
+* Return Value : none
+*******************************************************************************/
+#if 0
+void usb1_function_clear_ep_table_index (void)
+{
+ int ep;
+
+ for (ep = 0; ep <= USB_FUNCTION_MAX_EP_NO; ++ep)
+ {
+ g_usb1_function_EPTableIndex[ep] = USB_FUNCTION_EP_ERROR;
+ }
+}
+#endif
+
+/* End of File */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/USBDevice/TARGET_RENESAS/TARGET_VK_RZ_A1H/usb1/src/userdef/usb1_function_dmacdrv.c Fri Apr 29 01:16:25 2016 +0100
@@ -0,0 +1,698 @@
+/*******************************************************************************
+* DISCLAIMER
+* This software is supplied by Renesas Electronics Corporation and is only
+* intended for use with Renesas products. No other uses are authorized. This
+* software is owned by Renesas Electronics Corporation and is protected under
+* all applicable laws, including copyright laws.
+* THIS SOFTWARE IS PROVIDED "AS IS" AND RENESAS MAKES NO WARRANTIES REGARDING
+* THIS SOFTWARE, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING BUT NOT
+* LIMITED TO WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE
+* AND NON-INFRINGEMENT. ALL SUCH WARRANTIES ARE EXPRESSLY DISCLAIMED.
+* TO THE MAXIMUM EXTENT PERMITTED NOT PROHIBITED BY LAW, NEITHER RENESAS
+* ELECTRONICS CORPORATION NOR ANY OF ITS AFFILIATED COMPANIES SHALL BE LIABLE
+* FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR
+* ANY REASON RELATED TO THIS SOFTWARE, EVEN IF RENESAS OR ITS AFFILIATES HAVE
+* BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
+* Renesas reserves the right, without notice, to make changes to this software
+* and to discontinue the availability of this software. By using this software,
+* you agree to the additional terms and conditions found by accessing the
+* following link:
+* http://www.renesas.com/disclaimer
+* Copyright (C) 2012 - 2014 Renesas Electronics Corporation. All rights reserved.
+*******************************************************************************/
+/*******************************************************************************
+* File Name : usb1_function_dmacdrv.c
+* $Rev: 1116 $
+* $Date:: 2014-07-09 16:29:19 +0900#$
+* Device(s) : RZ/A1H
+* Tool-Chain :
+* OS : None
+* H/W Platform :
+* Description : RZ/A1H R7S72100 USB Sample Program
+* Operation :
+* Limitations :
+*******************************************************************************/
+
+
+/*******************************************************************************
+Includes <System Includes> , "Project Includes"
+*******************************************************************************/
+#include <stdio.h>
+#include "r_typedefs.h"
+#include "iodefine.h"
+#include "rza_io_regrw.h"
+#include "usb1_function_dmacdrv.h"
+
+
+/*******************************************************************************
+Typedef definitions
+*******************************************************************************/
+
+
+/*******************************************************************************
+Macro definitions
+*******************************************************************************/
+#define DMAC_INDEFINE (255) /* Macro definition when REQD bit is not used */
+
+/* ==== Request setting information for on-chip peripheral module ==== */
+typedef enum dmac_peri_req_reg_type
+{
+ DMAC_REQ_MID,
+ DMAC_REQ_RID,
+ DMAC_REQ_AM,
+ DMAC_REQ_LVL,
+ DMAC_REQ_REQD
+} dmac_peri_req_reg_type_t;
+
+
+/*******************************************************************************
+Imported global variables and functions (from other files)
+*******************************************************************************/
+
+
+/*******************************************************************************
+Exported global variables and functions (to be accessed by other files)
+*******************************************************************************/
+
+
+/*******************************************************************************
+Private global variables and functions
+*******************************************************************************/
+/* ==== Prototype declaration ==== */
+
+/* ==== Global variable ==== */
+/* On-chip peripheral module request setting table */
+static const uint8_t usb1_function_dmac_peri_req_init_table[8][5] =
+{
+ /* MID,RID,AM,LVL,REQD */
+ {32, 3, 2, 1, 1}, /* USB_0 channel 0 transmit FIFO empty */
+ {32, 3, 2, 1, 0}, /* USB_0 channel 0 receive FIFO full */
+ {33, 3, 2, 1, 1}, /* USB_0 channel 1 transmit FIFO empty */
+ {33, 3, 2, 1, 0}, /* USB_0 channel 1 receive FIFO full */
+ {34, 3, 2, 1, 1}, /* USB_1 channel 0 transmit FIFO empty */
+ {34, 3, 2, 1, 0}, /* USB_1 channel 0 receive FIFO full */
+ {35, 3, 2, 1, 1}, /* USB_1 channel 1 transmit FIFO empty */
+ {35, 3, 2, 1, 0}, /* USB_1 channel 1 receive FIFO full */
+};
+
+
+/*******************************************************************************
+* Function Name: usb1_function_DMAC3_PeriReqInit
+* Description : Sets the register mode for DMA mode and the on-chip peripheral
+* : module request for transfer request for DMAC channel 1.
+* : Executes DMAC initial setting using the DMA information
+* : specified by the argument *trans_info and the enabled/disabled
+* : continuous transfer specified by the argument continuation.
+* : Registers DMAC channel 1 interrupt handler function and sets
+* : the interrupt priority level. Then enables transfer completion
+* : interrupt.
+* Arguments : dmac_transinfo_t *trans_info : Setting information to DMAC register
+* : uint32_t dmamode : DMA mode (only for DMAC_MODE_REGISTER)
+* : uint32_t continuation : Set continuous transfer to be valid
+* : after DMA transfer has been completed
+* : DMAC_SAMPLE_CONTINUATION : Execute continuous transfer
+* : DMAC_SAMPLE_SINGLE : Do not execute continuous transfer
+* : uint32_t request_factor : Factor for on-chip peripheral module request
+* : DMAC_REQ_OSTM0TINT : OSTM_0 compare match
+* : DMAC_REQ_OSTM1TINT : OSTM_1 compare match
+* : DMAC_REQ_TGI0A : MTU2_0 input capture/compare match
+* : :
+* : uint32_t req_direction: Setting value of CHCFG_n register REQD bit
+* Return Value : none
+*******************************************************************************/
+void usb1_function_DMAC3_PeriReqInit (const dmac_transinfo_t * trans_info,
+ uint32_t dmamode, uint32_t continuation,
+ uint32_t request_factor, uint32_t req_direction)
+{
+ /* ==== Register mode ==== */
+ if (DMAC_MODE_REGISTER == dmamode)
+ {
+ /* ==== Next0 register set ==== */
+ DMAC3.N0SA_n = trans_info->src_addr; /* Start address of transfer source */
+ DMAC3.N0DA_n = trans_info->dst_addr; /* Start address of transfer destination */
+ DMAC3.N0TB_n = trans_info->count; /* Total transfer byte count */
+
+ /* DAD : Transfer destination address counting direction */
+ /* SAD : Transfer source address counting direction */
+ /* DDS : Transfer destination transfer size */
+ /* SDS : Transfer source transfer size */
+ RZA_IO_RegWrite_32(&DMAC3.CHCFG_n,
+ trans_info->daddr_dir,
+ DMAC3_CHCFG_n_DAD_SHIFT,
+ DMAC3_CHCFG_n_DAD);
+ RZA_IO_RegWrite_32(&DMAC3.CHCFG_n,
+ trans_info->saddr_dir,
+ DMAC3_CHCFG_n_SAD_SHIFT,
+ DMAC3_CHCFG_n_SAD);
+ RZA_IO_RegWrite_32(&DMAC3.CHCFG_n,
+ trans_info->dst_size,
+ DMAC3_CHCFG_n_DDS_SHIFT,
+ DMAC3_CHCFG_n_DDS);
+ RZA_IO_RegWrite_32(&DMAC3.CHCFG_n,
+ trans_info->src_size,
+ DMAC3_CHCFG_n_SDS_SHIFT,
+ DMAC3_CHCFG_n_SDS);
+
+ /* DMS : Register mode */
+ /* RSEL : Select Next0 register set */
+ /* SBE : No discharge of buffer data when aborted */
+ /* DEM : No DMA interrupt mask */
+ RZA_IO_RegWrite_32(&DMAC3.CHCFG_n,
+ 0,
+ DMAC3_CHCFG_n_DMS_SHIFT,
+ DMAC3_CHCFG_n_DMS);
+ RZA_IO_RegWrite_32(&DMAC3.CHCFG_n,
+ 0,
+ DMAC3_CHCFG_n_RSEL_SHIFT,
+ DMAC3_CHCFG_n_RSEL);
+ RZA_IO_RegWrite_32(&DMAC3.CHCFG_n,
+ 0,
+ DMAC3_CHCFG_n_SBE_SHIFT,
+ DMAC3_CHCFG_n_SBE);
+ RZA_IO_RegWrite_32(&DMAC3.CHCFG_n,
+ 0,
+ DMAC3_CHCFG_n_DEM_SHIFT,
+ DMAC3_CHCFG_n_DEM);
+
+ /* ---- Continuous transfer ---- */
+ if (DMAC_SAMPLE_CONTINUATION == continuation)
+ {
+ /* REN : Execute continuous transfer */
+ /* RSW : Change register set when DMA transfer is completed. */
+ RZA_IO_RegWrite_32(&DMAC3.CHCFG_n,
+ 1,
+ DMAC3_CHCFG_n_REN_SHIFT,
+ DMAC3_CHCFG_n_REN);
+ RZA_IO_RegWrite_32(&DMAC3.CHCFG_n,
+ 1,
+ DMAC3_CHCFG_n_RSW_SHIFT,
+ DMAC3_CHCFG_n_RSW);
+ }
+ /* ---- Single transfer ---- */
+ else
+ {
+ /* REN : Do not execute continuous transfer */
+ /* RSW : Do not change register set when DMA transfer is completed. */
+ RZA_IO_RegWrite_32(&DMAC3.CHCFG_n,
+ 0,
+ DMAC3_CHCFG_n_REN_SHIFT,
+ DMAC3_CHCFG_n_REN);
+ RZA_IO_RegWrite_32(&DMAC3.CHCFG_n,
+ 0,
+ DMAC3_CHCFG_n_RSW_SHIFT,
+ DMAC3_CHCFG_n_RSW);
+ }
+
+ /* TM : Single transfer */
+ /* SEL : Channel setting */
+ /* HIEN, LOEN : On-chip peripheral module request */
+ RZA_IO_RegWrite_32(&DMAC3.CHCFG_n,
+ 0,
+ DMAC3_CHCFG_n_TM_SHIFT,
+ DMAC3_CHCFG_n_TM);
+ RZA_IO_RegWrite_32(&DMAC3.CHCFG_n,
+ 3,
+ DMAC3_CHCFG_n_SEL_SHIFT,
+ DMAC3_CHCFG_n_SEL);
+ RZA_IO_RegWrite_32(&DMAC3.CHCFG_n,
+ 1,
+ DMAC3_CHCFG_n_HIEN_SHIFT,
+ DMAC3_CHCFG_n_HIEN);
+ RZA_IO_RegWrite_32(&DMAC3.CHCFG_n,
+ 0,
+ DMAC3_CHCFG_n_LOEN_SHIFT,
+ DMAC3_CHCFG_n_LOEN);
+
+ /* ---- Set factor by specified on-chip peripheral module request ---- */
+ RZA_IO_RegWrite_32(&DMAC3.CHCFG_n,
+ usb1_function_dmac_peri_req_init_table[request_factor][DMAC_REQ_AM],
+ DMAC3_CHCFG_n_AM_SHIFT,
+ DMAC3_CHCFG_n_AM);
+ RZA_IO_RegWrite_32(&DMAC3.CHCFG_n,
+ usb1_function_dmac_peri_req_init_table[request_factor][DMAC_REQ_LVL],
+ DMAC3_CHCFG_n_LVL_SHIFT,
+ DMAC3_CHCFG_n_LVL);
+
+ if (usb1_function_dmac_peri_req_init_table[request_factor][DMAC_REQ_REQD] != DMAC_INDEFINE)
+ {
+ RZA_IO_RegWrite_32(&DMAC3.CHCFG_n,
+ usb1_function_dmac_peri_req_init_table[request_factor][DMAC_REQ_REQD],
+ DMAC3_CHCFG_n_REQD_SHIFT,
+ DMAC3_CHCFG_n_REQD);
+ }
+ else
+ {
+ RZA_IO_RegWrite_32(&DMAC3.CHCFG_n,
+ req_direction,
+ DMAC3_CHCFG_n_REQD_SHIFT,
+ DMAC3_CHCFG_n_REQD);
+ }
+
+ RZA_IO_RegWrite_32(&DMAC23.DMARS,
+ usb1_function_dmac_peri_req_init_table[request_factor][DMAC_REQ_RID],
+ DMAC23_DMARS_CH3_RID_SHIFT,
+ DMAC23_DMARS_CH3_RID);
+ RZA_IO_RegWrite_32(&DMAC23.DMARS,
+ usb1_function_dmac_peri_req_init_table[request_factor][DMAC_REQ_MID],
+ DMAC23_DMARS_CH3_MID_SHIFT,
+ DMAC23_DMARS_CH3_MID);
+
+ /* PR : Round robin mode */
+ RZA_IO_RegWrite_32(&DMAC07.DCTRL_0_7,
+ 1,
+ DMAC07_DCTRL_0_7_PR_SHIFT,
+ DMAC07_DCTRL_0_7_PR);
+ }
+}
+
+/*******************************************************************************
+* Function Name: usb1_function_DMAC3_Open
+* Description : Enables DMAC channel 3 transfer.
+* Arguments : uint32_t req : DMAC request mode
+* Return Value : 0 : Succeeded in enabling DMA transfer
+* : -1 : Failed to enable DMA transfer (due to DMA operation)
+*******************************************************************************/
+int32_t usb1_function_DMAC3_Open (uint32_t req)
+{
+ int32_t ret;
+ volatile uint8_t dummy;
+
+ /* Transferable? */
+ if ((0 == RZA_IO_RegRead_32(&DMAC3.CHSTAT_n,
+ DMAC3_CHSTAT_n_EN_SHIFT,
+ DMAC3_CHSTAT_n_EN)) &&
+ (0 == RZA_IO_RegRead_32(&DMAC3.CHSTAT_n,
+ DMAC3_CHSTAT_n_TACT_SHIFT,
+ DMAC3_CHSTAT_n_TACT)))
+ {
+ /* Clear Channel Status Register */
+ RZA_IO_RegWrite_32(&DMAC3.CHCTRL_n,
+ 1,
+ DMAC3_CHCTRL_n_SWRST_SHIFT,
+ DMAC3_CHCTRL_n_SWRST);
+ dummy = RZA_IO_RegRead_32(&DMAC3.CHCTRL_n,
+ DMAC3_CHCTRL_n_SWRST_SHIFT,
+ DMAC3_CHCTRL_n_SWRST);
+ /* Enable DMA transfer */
+ RZA_IO_RegWrite_32(&DMAC3.CHCTRL_n,
+ 1,
+ DMAC3_CHCTRL_n_SETEN_SHIFT,
+ DMAC3_CHCTRL_n_SETEN);
+
+ /* ---- Request by software ---- */
+ if (DMAC_REQ_MODE_SOFT == req)
+ {
+ /* DMA transfer Request by software */
+ RZA_IO_RegWrite_32(&DMAC3.CHCTRL_n,
+ 1,
+ DMAC3_CHCTRL_n_STG_SHIFT,
+ DMAC3_CHCTRL_n_STG);
+ }
+
+ ret = 0;
+ }
+ else
+ {
+ ret = -1;
+ }
+
+ return ret;
+}
+
+/*******************************************************************************
+* Function Name: usb1_function_DMAC3_Close
+* Description : Aborts DMAC channel 3 transfer. Returns the remaining transfer
+* : byte count at the time of DMA transfer abort to the argument
+* : *remain.
+* Arguments : uint32_t * remain : Remaining transfer byte count when
+* : : DMA transfer is aborted
+* Return Value : none
+*******************************************************************************/
+void usb1_function_DMAC3_Close (uint32_t * remain)
+{
+
+ /* ==== Abort transfer ==== */
+ RZA_IO_RegWrite_32(&DMAC3.CHCTRL_n,
+ 1,
+ DMAC3_CHCTRL_n_CLREN_SHIFT,
+ DMAC3_CHCTRL_n_CLREN);
+
+ while (1 == RZA_IO_RegRead_32(&DMAC3.CHSTAT_n,
+ DMAC3_CHSTAT_n_TACT_SHIFT,
+ DMAC3_CHSTAT_n_TACT))
+ {
+ /* Loop until transfer is aborted */
+ }
+
+ while (1 == RZA_IO_RegRead_32(&DMAC3.CHSTAT_n,
+ DMAC3_CHSTAT_n_EN_SHIFT,
+ DMAC3_CHSTAT_n_EN))
+ {
+ /* Loop until 0 is set in EN before checking the remaining transfer byte count */
+ }
+ /* ==== Obtain remaining transfer byte count ==== */
+ *remain = DMAC3.CRTB_n;
+}
+
+/*******************************************************************************
+* Function Name: usb1_function_DMAC3_Load_Set
+* Description : Sets the transfer source address, transfer destination
+* : address, and total transfer byte count respectively
+* : specified by the argument src_addr, dst_addr, and count to
+* : DMAC channel 3 as DMA transfer information.
+* : Sets the register set selected by the CHCFG_n register
+* : RSEL bit from the Next0 or Next1 register set.
+* : This function should be called when DMA transfer of DMAC
+* : channel 3 is aboted.
+* Arguments : uint32_t src_addr : Transfer source address
+* : uint32_t dst_addr : Transfer destination address
+* : uint32_t count : Total transfer byte count
+* Return Value : none
+*******************************************************************************/
+void usb1_function_DMAC3_Load_Set (uint32_t src_addr, uint32_t dst_addr, uint32_t count)
+{
+ uint8_t reg_set;
+
+ /* Obtain register set in use */
+ reg_set = RZA_IO_RegRead_32(&DMAC3.CHSTAT_n,
+ DMAC3_CHSTAT_n_SR_SHIFT,
+ DMAC3_CHSTAT_n_SR);
+
+ /* ==== Load ==== */
+ if (0 == reg_set)
+ {
+ /* ---- Next0 Register Set ---- */
+ DMAC3.N0SA_n = src_addr; /* Start address of transfer source */
+ DMAC3.N0DA_n = dst_addr; /* Start address of transfer destination */
+ DMAC3.N0TB_n = count; /* Total transfer byte count */
+ }
+ else
+ {
+ /* ---- Next1 Register Set ---- */
+ DMAC3.N1SA_n = src_addr; /* Start address of transfer source */
+ DMAC3.N1DA_n = dst_addr; /* Start address of transfer destination */
+ DMAC3.N1TB_n = count; /* Total transfer byte count */
+ }
+}
+
+/*******************************************************************************
+* Function Name: usb1_function_DMAC4_PeriReqInit
+* Description : Sets the register mode for DMA mode and the on-chip peripheral
+* : module request for transfer request for DMAC channel 2.
+* : Executes DMAC initial setting using the DMA information
+* : specified by the argument *trans_info and the enabled/disabled
+* : continuous transfer specified by the argument continuation.
+* : Registers DMAC channel 2 interrupt handler function and sets
+* : the interrupt priority level. Then enables transfer completion
+* : interrupt.
+* Arguments : dmac_transinfo_t * trans_info : Setting information to DMAC
+* : : register
+* : uint32_t dmamode : DMA mode (only for DMAC_MODE_REGISTER)
+* : uint32_t continuation : Set continuous transfer to be valid
+* : : after DMA transfer has been completed
+* : DMAC_SAMPLE_CONTINUATION : Execute continuous transfer
+* : DMAC_SAMPLE_SINGLE : Do not execute continuous
+* : : transfer
+* : uint32_t request_factor : Factor for on-chip peripheral module
+* : : request
+* : DMAC_REQ_OSTM0TINT : OSTM_0 compare match
+* : DMAC_REQ_OSTM1TINT : OSTM_1 compare match
+* : DMAC_REQ_TGI0A : MTU2_0 input capture/compare match
+* : :
+* : uint32_t req_direction : Setting value of CHCFG_n register
+* : : REQD bit
+*******************************************************************************/
+void usb1_function_DMAC4_PeriReqInit (const dmac_transinfo_t * trans_info,
+ uint32_t dmamode, uint32_t continuation,
+ uint32_t request_factor, uint32_t req_direction)
+{
+ /* ==== Register mode ==== */
+ if (DMAC_MODE_REGISTER == dmamode)
+ {
+ /* ==== Next0 register set ==== */
+ DMAC4.N0SA_n = trans_info->src_addr; /* Start address of transfer source */
+ DMAC4.N0DA_n = trans_info->dst_addr; /* Start address of transfer destination */
+ DMAC4.N0TB_n = trans_info->count; /* Total transfer byte count */
+
+ /* DAD : Transfer destination address counting direction */
+ /* SAD : Transfer source address counting direction */
+ /* DDS : Transfer destination transfer size */
+ /* SDS : Transfer source transfer size */
+ RZA_IO_RegWrite_32(&DMAC4.CHCFG_n,
+ trans_info->daddr_dir,
+ DMAC4_CHCFG_n_DAD_SHIFT,
+ DMAC4_CHCFG_n_DAD);
+ RZA_IO_RegWrite_32(&DMAC4.CHCFG_n,
+ trans_info->saddr_dir,
+ DMAC4_CHCFG_n_SAD_SHIFT,
+ DMAC4_CHCFG_n_SAD);
+ RZA_IO_RegWrite_32(&DMAC4.CHCFG_n,
+ trans_info->dst_size,
+ DMAC4_CHCFG_n_DDS_SHIFT,
+ DMAC4_CHCFG_n_DDS);
+ RZA_IO_RegWrite_32(&DMAC4.CHCFG_n,
+ trans_info->src_size,
+ DMAC4_CHCFG_n_SDS_SHIFT,
+ DMAC4_CHCFG_n_SDS);
+
+ /* DMS : Register mode */
+ /* RSEL : Select Next0 register set */
+ /* SBE : No discharge of buffer data when aborted */
+ /* DEM : No DMA interrupt mask */
+ RZA_IO_RegWrite_32(&DMAC4.CHCFG_n,
+ 0,
+ DMAC4_CHCFG_n_DMS_SHIFT,
+ DMAC4_CHCFG_n_DMS);
+ RZA_IO_RegWrite_32(&DMAC4.CHCFG_n,
+ 0,
+ DMAC4_CHCFG_n_RSEL_SHIFT,
+ DMAC4_CHCFG_n_RSEL);
+ RZA_IO_RegWrite_32(&DMAC4.CHCFG_n,
+ 0,
+ DMAC4_CHCFG_n_SBE_SHIFT,
+ DMAC4_CHCFG_n_SBE);
+ RZA_IO_RegWrite_32(&DMAC4.CHCFG_n,
+ 0,
+ DMAC4_CHCFG_n_DEM_SHIFT,
+ DMAC4_CHCFG_n_DEM);
+
+ /* ---- Continuous transfer ---- */
+ if (DMAC_SAMPLE_CONTINUATION == continuation)
+ {
+ /* REN : Execute continuous transfer */
+ /* RSW : Change register set when DMA transfer is completed. */
+ RZA_IO_RegWrite_32(&DMAC4.CHCFG_n,
+ 1,
+ DMAC4_CHCFG_n_REN_SHIFT,
+ DMAC4_CHCFG_n_REN);
+ RZA_IO_RegWrite_32(&DMAC4.CHCFG_n,
+ 1,
+ DMAC4_CHCFG_n_RSW_SHIFT,
+ DMAC4_CHCFG_n_RSW);
+ }
+ /* ---- Single transfer ---- */
+ else
+ {
+ /* REN : Do not execute continuous transfer */
+ /* RSW : Do not change register set when DMA transfer is completed. */
+ RZA_IO_RegWrite_32(&DMAC4.CHCFG_n,
+ 0,
+ DMAC4_CHCFG_n_REN_SHIFT,
+ DMAC4_CHCFG_n_REN);
+ RZA_IO_RegWrite_32(&DMAC4.CHCFG_n,
+ 0,
+ DMAC4_CHCFG_n_RSW_SHIFT,
+ DMAC4_CHCFG_n_RSW);
+ }
+
+ /* TM : Single transfer */
+ /* SEL : Channel setting */
+ /* HIEN, LOEN : On-chip peripheral module request */
+ RZA_IO_RegWrite_32(&DMAC4.CHCFG_n,
+ 0,
+ DMAC4_CHCFG_n_TM_SHIFT,
+ DMAC4_CHCFG_n_TM);
+ RZA_IO_RegWrite_32(&DMAC4.CHCFG_n,
+ 4,
+ DMAC4_CHCFG_n_SEL_SHIFT,
+ DMAC4_CHCFG_n_SEL);
+ RZA_IO_RegWrite_32(&DMAC4.CHCFG_n,
+ 1,
+ DMAC4_CHCFG_n_HIEN_SHIFT,
+ DMAC4_CHCFG_n_HIEN);
+ RZA_IO_RegWrite_32(&DMAC4.CHCFG_n,
+ 0,
+ DMAC4_CHCFG_n_LOEN_SHIFT,
+ DMAC4_CHCFG_n_LOEN);
+
+ /* ---- Set factor by specified on-chip peripheral module request ---- */
+ RZA_IO_RegWrite_32(&DMAC4.CHCFG_n,
+ usb1_function_dmac_peri_req_init_table[request_factor][DMAC_REQ_AM],
+ DMAC4_CHCFG_n_AM_SHIFT,
+ DMAC4_CHCFG_n_AM);
+ RZA_IO_RegWrite_32(&DMAC4.CHCFG_n,
+ usb1_function_dmac_peri_req_init_table[request_factor][DMAC_REQ_LVL],
+ DMAC4_CHCFG_n_LVL_SHIFT,
+ DMAC4_CHCFG_n_LVL);
+ if (usb1_function_dmac_peri_req_init_table[request_factor][DMAC_REQ_REQD] != DMAC_INDEFINE)
+ {
+ RZA_IO_RegWrite_32(&DMAC4.CHCFG_n,
+ usb1_function_dmac_peri_req_init_table[request_factor][DMAC_REQ_REQD],
+ DMAC4_CHCFG_n_REQD_SHIFT,
+ DMAC4_CHCFG_n_REQD);
+ }
+ else
+ {
+ RZA_IO_RegWrite_32(&DMAC4.CHCFG_n,
+ req_direction,
+ DMAC4_CHCFG_n_REQD_SHIFT,
+ DMAC4_CHCFG_n_REQD);
+ }
+ RZA_IO_RegWrite_32(&DMAC45.DMARS,
+ usb1_function_dmac_peri_req_init_table[request_factor][DMAC_REQ_RID],
+ DMAC45_DMARS_CH4_RID_SHIFT,
+ DMAC45_DMARS_CH4_RID);
+ RZA_IO_RegWrite_32(&DMAC45.DMARS,
+ usb1_function_dmac_peri_req_init_table[request_factor][DMAC_REQ_MID],
+ DMAC45_DMARS_CH4_MID_SHIFT,
+ DMAC45_DMARS_CH4_MID);
+
+ /* PR : Round robin mode */
+ RZA_IO_RegWrite_32(&DMAC07.DCTRL_0_7,
+ 1,
+ DMAC07_DCTRL_0_7_PR_SHIFT,
+ DMAC07_DCTRL_0_7_PR);
+ }
+}
+
+/*******************************************************************************
+* Function Name: usb1_function_DMAC4_Open
+* Description : Enables DMAC channel 4 transfer.
+* Arguments : uint32_t req : DMAC request mode
+* Return Value : 0 : Succeeded in enabling DMA transfer
+* : -1 : Failed to enable DMA transfer (due to DMA operation)
+*******************************************************************************/
+int32_t usb1_function_DMAC4_Open (uint32_t req)
+{
+ int32_t ret;
+ volatile uint8_t dummy;
+
+ /* Transferable? */
+ if ((0 == RZA_IO_RegRead_32(&DMAC4.CHSTAT_n,
+ DMAC4_CHSTAT_n_EN_SHIFT,
+ DMAC4_CHSTAT_n_EN)) &&
+ (0 == RZA_IO_RegRead_32(&DMAC4.CHSTAT_n,
+ DMAC4_CHSTAT_n_TACT_SHIFT,
+ DMAC4_CHSTAT_n_TACT)))
+ {
+ /* Clear Channel Status Register */
+ RZA_IO_RegWrite_32(&DMAC4.CHCTRL_n,
+ 1,
+ DMAC4_CHCTRL_n_SWRST_SHIFT,
+ DMAC4_CHCTRL_n_SWRST);
+ dummy = RZA_IO_RegRead_32(&DMAC4.CHCTRL_n,
+ DMAC4_CHCTRL_n_SWRST_SHIFT,
+ DMAC4_CHCTRL_n_SWRST);
+ /* Enable DMA transfer */
+ RZA_IO_RegWrite_32(&DMAC4.CHCTRL_n,
+ 1,
+ DMAC4_CHCTRL_n_SETEN_SHIFT,
+ DMAC4_CHCTRL_n_SETEN);
+
+ /* ---- Request by software ---- */
+ if (DMAC_REQ_MODE_SOFT == req)
+ {
+ /* DMA transfer Request by software */
+ RZA_IO_RegWrite_32(&DMAC4.CHCTRL_n,
+ 1,
+ DMAC4_CHCTRL_n_STG_SHIFT,
+ DMAC4_CHCTRL_n_STG);
+ }
+
+ ret = 0;
+ }
+ else
+ {
+ ret = -1;
+ }
+
+ return ret;
+}
+
+/*******************************************************************************
+* Function Name: usb1_function_DMAC4_Close
+* Description : Aborts DMAC channel 4 transfer. Returns the remaining transfer
+* : byte count at the time of DMA transfer abort to the argument
+* : *remain.
+* Arguments : uint32_t * remain : Remaining transfer byte count when
+* : : DMA transfer is aborted
+* Return Value : none
+*******************************************************************************/
+void usb1_function_DMAC4_Close (uint32_t * remain)
+{
+
+ /* ==== Abort transfer ==== */
+ RZA_IO_RegWrite_32(&DMAC4.CHCTRL_n,
+ 1,
+ DMAC4_CHCTRL_n_CLREN_SHIFT,
+ DMAC4_CHCTRL_n_CLREN);
+
+ while (1 == RZA_IO_RegRead_32(&DMAC4.CHSTAT_n,
+ DMAC4_CHSTAT_n_TACT_SHIFT,
+ DMAC4_CHSTAT_n_TACT))
+ {
+ /* Loop until transfer is aborted */
+ }
+
+ while (1 == RZA_IO_RegRead_32(&DMAC4.CHSTAT_n,
+ DMAC4_CHSTAT_n_EN_SHIFT,
+ DMAC4_CHSTAT_n_EN))
+ {
+ /* Loop until 0 is set in EN before checking the remaining transfer byte count */
+ }
+ /* ==== Obtain remaining transfer byte count ==== */
+ *remain = DMAC4.CRTB_n;
+}
+
+/*******************************************************************************
+* Function Name: usb1_function_DMAC4_Load_Set
+* Description : Sets the transfer source address, transfer destination
+* : address, and total transfer byte count respectively
+* : specified by the argument src_addr, dst_addr, and count to
+* : DMAC channel 4 as DMA transfer information.
+* : Sets the register set selected by the CHCFG_n register
+* : RSEL bit from the Next0 or Next1 register set.
+* : This function should be called when DMA transfer of DMAC
+* : channel 4 is aboted.
+* Arguments : uint32_t src_addr : Transfer source address
+* : uint32_t dst_addr : Transfer destination address
+* : uint32_t count : Total transfer byte count
+* Return Value : none
+*******************************************************************************/
+void usb1_function_DMAC4_Load_Set (uint32_t src_addr, uint32_t dst_addr, uint32_t count)
+{
+ uint8_t reg_set;
+
+ /* Obtain register set in use */
+ reg_set = RZA_IO_RegRead_32(&DMAC4.CHSTAT_n,
+ DMAC4_CHSTAT_n_SR_SHIFT,
+ DMAC4_CHSTAT_n_SR);
+
+ /* ==== Load ==== */
+ if (0 == reg_set)
+ {
+ /* ---- Next0 Register Set ---- */
+ DMAC4.N0SA_n = src_addr; /* Start address of transfer source */
+ DMAC4.N0DA_n = dst_addr; /* Start address of transfer destination */
+ DMAC4.N0TB_n = count; /* Total transfer byte count */
+ }
+ else
+ {
+ /* ---- Next1 Register Set ---- */
+ DMAC4.N1SA_n = src_addr; /* Start address of transfer source */
+ DMAC4.N1DA_n = dst_addr; /* Start address of transfer destination */
+ DMAC4.N1TB_n = count; /* Total transfer byte count */
+ }
+}
+
+/* End of File */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/USBDevice/TARGET_RENESAS/TARGET_VK_RZ_A1H/usb1/src/userdef/usb1_function_userdef.c Fri Apr 29 01:16:25 2016 +0100
@@ -0,0 +1,762 @@
+/*******************************************************************************
+* DISCLAIMER
+* This software is supplied by Renesas Electronics Corporation and is only
+* intended for use with Renesas products. No other uses are authorized. This
+* software is owned by Renesas Electronics Corporation and is protected under
+* all applicable laws, including copyright laws.
+* THIS SOFTWARE IS PROVIDED "AS IS" AND RENESAS MAKES NO WARRANTIES REGARDING
+* THIS SOFTWARE, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING BUT NOT
+* LIMITED TO WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE
+* AND NON-INFRINGEMENT. ALL SUCH WARRANTIES ARE EXPRESSLY DISCLAIMED.
+* TO THE MAXIMUM EXTENT PERMITTED NOT PROHIBITED BY LAW, NEITHER RENESAS
+* ELECTRONICS CORPORATION NOR ANY OF ITS AFFILIATED COMPANIES SHALL BE LIABLE
+* FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR
+* ANY REASON RELATED TO THIS SOFTWARE, EVEN IF RENESAS OR ITS AFFILIATES HAVE
+* BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
+* Renesas reserves the right, without notice, to make changes to this software
+* and to discontinue the availability of this software. By using this software,
+* you agree to the additional terms and conditions found by accessing the
+* following link:
+* http://www.renesas.com/disclaimer
+* Copyright (C) 2012 - 2014 Renesas Electronics Corporation. All rights reserved.
+*******************************************************************************/
+/*******************************************************************************
+* File Name : usb1_function_userdef.c
+* $Rev: 1116 $
+* $Date:: 2014-07-09 16:29:19 +0900#$
+* Device(s) : RZ/A1H
+* Tool-Chain :
+* OS : None
+* H/W Platform :
+* Description : RZ/A1H R7S72100 USB Sample Program
+* Operation :
+* Limitations :
+*******************************************************************************/
+
+
+/*******************************************************************************
+Includes <System Includes> , "Project Includes"
+*******************************************************************************/
+#include <stdio.h>
+#include "r_typedefs.h"
+#include "iodefine.h"
+#include "devdrv_usb_function_api.h"
+#include "usb1_function_dmacdrv.h" /* common DMAC driver for USB */
+
+
+/*******************************************************************************
+Typedef definitions
+*******************************************************************************/
+
+
+/*******************************************************************************
+Macro definitions
+*******************************************************************************/
+#define DUMMY_ACCESS OSTM0CNT
+
+/* #define CACHE_WRITEBACK */
+
+
+/*******************************************************************************
+Imported global variables and functions (from other files)
+*******************************************************************************/
+extern int32_t io_cwb(unsigned long start, unsigned long end);
+
+
+/*******************************************************************************
+Exported global variables and functions (to be accessed by other files)
+*******************************************************************************/
+static void usb1_function_enable_dmac0(uint32_t src, uint32_t dst, uint32_t count,
+ uint32_t size, uint32_t dir, uint32_t fifo, uint16_t dfacc);
+static void usb1_function_enable_dmac1(uint32_t src, uint32_t dst, uint32_t count,
+ uint32_t size, uint32_t dir, uint32_t fifo, uint16_t dfacc);
+static void Userdef_USB_usb1_function_delay_10us_2(void);
+
+
+/*******************************************************************************
+Private global variables and functions
+*******************************************************************************/
+
+
+/*******************************************************************************
+* Function Name: Userdef_USB_usb1_function_d0fifo_dmaintid
+* Description : get D0FIFO DMA Interrupt ID
+* Arguments : none
+* Return Value : D0FIFO DMA Interrupt ID
+*******************************************************************************/
+IRQn_Type Userdef_USB_usb1_function_d0fifo_dmaintid (void)
+{
+#if 0
+ return DMAINT1_IRQn;
+#else
+ return 0xFFFF;
+#endif
+}
+
+/*******************************************************************************
+* Function Name: Userdef_USB_usb1_function_d1fifo_dmaintid
+* Description : get D1FIFO DMA Interrupt ID
+* Arguments : none
+* Return Value : D1FIFO DMA Interrupt ID
+*******************************************************************************/
+IRQn_Type Userdef_USB_usb1_function_d1fifo_dmaintid (void)
+{
+#if 0
+ return DMAINT1_IRQn;
+#else
+ return 0xFFFF;
+#endif
+}
+
+/*******************************************************************************
+* Function Name: Userdef_USB_usb1_function_attach
+* Description : Wait for the software of 1ms.
+* : Alter this function according to the user's system.
+* Arguments : none
+* Return Value : none
+*******************************************************************************/
+void Userdef_USB_usb1_function_attach (void)
+{
+ printf("\n");
+ printf("channel 1 attach device\n");
+ printf("\n");
+}
+
+/*******************************************************************************
+* Function Name: Userdef_USB_usb1_function_detach
+* Description : Wait for the software of 1ms.
+* : Alter this function according to the user's system.
+* Arguments : none
+* Return Value : none
+*******************************************************************************/
+void Userdef_USB_usb1_function_detach (void)
+{
+ printf("\n");
+ printf("channel 1 detach device\n");
+ printf("\n");
+}
+
+/*******************************************************************************
+* Function Name: Userdef_USB_usb1_function_delay_1ms
+* Description : Wait for the software of 1ms.
+* : Alter this function according to the user's system.
+* Arguments : none
+* Return Value : none
+*******************************************************************************/
+void Userdef_USB_usb1_function_delay_1ms (void)
+{
+ volatile int i;
+ volatile unsigned long tmp;
+
+ /*
+ * Wait 1ms (Please change for your MCU).
+ */
+ for (i = 0; i < 1440; ++i)
+ {
+ tmp = DUMMY_ACCESS;
+ }
+}
+
+/*******************************************************************************
+* Function Name: Userdef_USB_usb1_function_delay_xms
+* Description : Wait for the software in the period of time specified by the
+* : argument.
+* : Alter this function according to the user's system.
+* Arguments : uint32_t msec ; Wait Time (msec)
+* Return Value : none
+*******************************************************************************/
+void Userdef_USB_usb1_function_delay_xms (uint32_t msec)
+{
+ volatile unsigned short i;
+
+ for (i = 0; i < msec; ++i)
+ {
+ Userdef_USB_usb1_function_delay_1ms();
+ }
+}
+
+/*******************************************************************************
+* Function Name: Userdef_USB_usb1_function_delay_10us
+* Description : Waits for software for the period specified by the argument.
+* : Alter this function according to the user's system.
+* Arguments : uint32_t usec ; Wait Time(x 10usec)
+* Return Value : none
+*******************************************************************************/
+void Userdef_USB_usb1_function_delay_10us (uint32_t usec)
+{
+ volatile int i;
+
+ /* Wait 10us (Please change for your MCU) */
+ for (i = 0; i < usec; ++i)
+ {
+ Userdef_USB_usb1_function_delay_10us_2();
+ }
+}
+
+/*******************************************************************************
+* Function Name: Userdef_USB_usb1_function_delay_10us_2
+* Description : Waits for software for the period specified by the argument.
+* : Alter this function according to the user's system.
+* Arguments : none
+* Return Value : none
+*******************************************************************************/
+static void Userdef_USB_usb1_function_delay_10us_2 (void)
+{
+ volatile int i;
+ volatile unsigned long tmp;
+
+ /* Wait 1us (Please change for your MCU) */
+ for (i = 0; i < 14; ++i)
+ {
+ tmp = DUMMY_ACCESS;
+ }
+}
+
+/*******************************************************************************
+* Function Name: Userdef_USB_usb1_function_delay_500ns
+* Description : Wait for software for 500ns.
+* : Alter this function according to the user's system.
+* Arguments : none
+* Return Value : none
+*******************************************************************************/
+void Userdef_USB_usb1_function_delay_500ns (void)
+{
+ volatile int i;
+ volatile unsigned long tmp;
+
+ /* Wait 500ns (Please change for your MCU) */
+ /* Wait 500ns I clock 266MHz */
+ tmp = DUMMY_ACCESS;
+}
+
+/*******************************************************************************
+* Function Name: Userdef_USB_usb1_function_start_dma
+* Description : Enables DMA transfer on the information specified by the argument.
+* : Set DMAC register by this function to enable DMA transfer.
+* : After executing this function, USB module is set to start DMA
+* : transfer. DMA transfer should not wait for DMA transfer complete.
+* Arguments : USB_FUNCTION_DMA_t *dma : DMA parameter
+* : typedef struct{
+* : uint32_t fifo; FIFO for using
+* : uint32_t buffer; Start address of transfer source/destination
+* : uint32_t bytes; Transfer size(Byte)
+* : uint32_t dir; Transfer direction(0:Buffer->FIFO, 1:FIFO->Buffer)
+* : uint32_t size; DMA transfer size
+* : } USB_FUNCTION_DMA_t;
+* : uint16_t dfacc ; 0 : cycle steal mode
+* : 1 : 16byte continuous mode
+* : 2 : 32byte continuous mode
+* Return Value : none
+*******************************************************************************/
+void Userdef_USB_usb1_function_start_dma (USB_FUNCTION_DMA_t * dma, uint16_t dfacc)
+{
+ uint32_t trncount;
+ uint32_t src;
+ uint32_t dst;
+ uint32_t size;
+ uint32_t dir;
+#ifdef CACHE_WRITEBACK
+ uint32_t ptr;
+#endif
+
+ trncount = dma->bytes;
+ dir = dma->dir;
+
+ if (dir == USB_FUNCTION_FIFO2BUF)
+ {
+ /* DxFIFO determination */
+ dst = dma->buffer;
+#ifndef __USB_FUNCTION_DF_ACC_ENABLE__
+ if (dma->fifo == USB_FUNCTION_D0FIFO_DMA)
+ {
+ src = (uint32_t)(&USB201.D0FIFO.UINT32);
+ }
+ else
+ {
+ src = (uint32_t)(&USB201.D1FIFO.UINT32);
+ }
+ size = dma->size;
+
+ if (size == 0)
+ {
+ src += 3; /* byte access */
+ }
+ else if (size == 1)
+ {
+ src += 2; /* short access */
+ }
+ else
+ {
+ /* Do Nothing */
+ }
+#else
+ size = dma->size;
+
+ if (size == 2)
+ {
+ /* 32bit access */
+ if (dfacc == 2)
+ {
+ /* 32byte access */
+ if (dma->fifo == USB_FUNCTION_D0FIFO_DMA)
+ {
+ src = (uint32_t)(&USB201.D0FIFOB0);
+ }
+ else
+ {
+ src = (uint32_t)(&USB201.D1FIFOB0);
+ }
+ }
+ else if (dfacc == 1)
+ {
+ /* 16byte access */
+ if (dma->fifo == USB_FUNCTION_D0FIFO_DMA)
+ {
+ src = (uint32_t)(&USB201.D0FIFOB0);
+ }
+ else
+ {
+ src = (uint32_t)(&USB201.D1FIFOB0);
+ }
+ }
+ else
+ {
+ /* normal access */
+ if (dma->fifo == USB_FUNCTION_D0FIFO_DMA)
+ {
+ src = (uint32_t)(&USB201.D0FIFO.UINT32);
+ }
+ else
+ {
+ src = (uint32_t)(&USB201.D1FIFO.UINT32);
+ }
+ }
+ }
+ else if (size == 1)
+ {
+ /* 16bit access */
+ dfacc = 0; /* force normal access */
+
+ if (dma->fifo == USB_FUNCTION_D0FIFO_DMA)
+ {
+ src = (uint32_t)(&USB201.D0FIFO.UINT32);
+ }
+ else
+ {
+ src = (uint32_t)(&USB201.D1FIFO.UINT32);
+ }
+ src += 2; /* short access */
+ }
+ else
+ {
+ /* 8bit access */
+ dfacc = 0; /* force normal access */
+
+ if (dma->fifo == USB_FUNCTION_D0FIFO_DMA)
+ {
+ src = (uint32_t)(&USB201.D0FIFO.UINT32);
+ }
+ else
+ {
+ src = (uint32_t)(&USB201.D1FIFO.UINT32);
+ }
+ src += 3; /* byte access */
+ }
+#endif
+ }
+ else
+ {
+ /* DxFIFO determination */
+ src = dma->buffer;
+#ifndef __USB_FUNCTION_DF_ACC_ENABLE__
+ if (dma->fifo == USB_FUNCTION_D0FIFO_DMA)
+ {
+ dst = (uint32_t)(&USB201.D0FIFO.UINT32);
+ }
+ else
+ {
+ dst = (uint32_t)(&USB201.D1FIFO.UINT32);
+ }
+ size = dma->size;
+
+ if (size == 0)
+ {
+ dst += 3; /* byte access */
+ }
+ else if (size == 1)
+ {
+ dst += 2; /* short access */
+ }
+ else
+ {
+ /* Do Nothing */
+ }
+#else
+ size = dma->size;
+
+ if (size == 2)
+ {
+ /* 32bit access */
+ if (dfacc == 2)
+ {
+ /* 32byte access */
+ if (dma->fifo == USB_FUNCTION_D0FIFO_DMA)
+ {
+ dst = (uint32_t)(&USB201.D0FIFOB0);
+ }
+ else
+ {
+ dst = (uint32_t)(&USB201.D1FIFOB0);
+ }
+ }
+ else if (dfacc == 1)
+ {
+ /* 16byte access */
+ if (dma->fifo == USB_FUNCTION_D0FIFO_DMA)
+ {
+ dst = (uint32_t)(&USB201.D0FIFOB0);
+ }
+ else
+ {
+ dst = (uint32_t)(&USB201.D1FIFOB0);
+ }
+ }
+ else
+ {
+ /* normal access */
+ if (dma->fifo == USB_FUNCTION_D0FIFO_DMA)
+ {
+ dst = (uint32_t)(&USB201.D0FIFO.UINT32);
+ }
+ else
+ {
+ dst = (uint32_t)(&USB201.D1FIFO.UINT32);
+ }
+ }
+ }
+ else if (size == 1)
+ {
+ /* 16bit access */
+ dfacc = 0; /* force normal access */
+ if (dma->fifo == USB_FUNCTION_D0FIFO_DMA)
+ {
+ dst = (uint32_t)(&USB201.D0FIFO.UINT32);
+ }
+ else
+ {
+ dst = (uint32_t)(&USB201.D1FIFO.UINT32);
+ }
+ dst += 2; /* short access */
+ }
+ else
+ {
+ /* 8bit access */
+ dfacc = 0; /* force normal access */
+
+ if (dma->fifo == USB_FUNCTION_D0FIFO_DMA)
+ {
+ dst = (uint32_t)(&USB201.D0FIFO.UINT32);
+ }
+ else
+ {
+ dst = (uint32_t)(&USB201.D1FIFO.UINT32);
+ }
+ dst += 3; /* byte access */
+ }
+#endif
+ }
+
+#ifdef CACHE_WRITEBACK
+ ptr = (uint32_t)dma->buffer;
+
+ if ((ptr & 0x20000000ul) == 0)
+ {
+ io_cwb((uint32_t)ptr, (uint32_t)(ptr) + trncount);
+ }
+#endif
+
+ if (dma->fifo == USB_FUNCTION_D0FIFO_DMA)
+ {
+ usb1_function_enable_dmac0(src, dst, trncount, size, dir, dma->fifo, dfacc);
+ }
+ else
+ {
+ usb1_function_enable_dmac1(src, dst, trncount, size, dir, dma->fifo, dfacc);
+ }
+}
+
+/*******************************************************************************
+* Function Name: usb1_function_enable_dmac0
+* Description : Enables DMA transfer on the information specified by the argument.
+* Arguments : uint32_t src : src address
+* : uint32_t dst : dst address
+* : uint32_t count : transfer byte
+* : uint32_t size : transfer size
+* : uint32_t dir : direction
+* : uint32_t fifo : FIFO(D0FIFO or D1FIFO)
+* : uint16_t dfacc : 0 : normal access
+* : : 1 : 16byte access
+* : : 2 : 32byte access
+* Return Value : none
+*******************************************************************************/
+static void usb1_function_enable_dmac0 (uint32_t src, uint32_t dst, uint32_t count,
+ uint32_t size, uint32_t dir, uint32_t fifo, uint16_t dfacc)
+{
+ dmac_transinfo_t trans_info;
+ uint32_t request_factor = 0;
+ int32_t ret;
+
+ /* ==== Variable setting for DMAC initialization ==== */
+ trans_info.src_addr = (uint32_t)src; /* Start address of transfer source */
+ trans_info.dst_addr = (uint32_t)dst; /* Start address of transfer destination */
+ trans_info.count = (uint32_t)count; /* Total byte count to be transferred */
+#ifndef __USB_FUNCTION_DF_ACC_ENABLE__
+ if (size == 0)
+ {
+ trans_info.src_size = DMAC_TRANS_SIZE_8; /* Transfer source transfer size */
+ trans_info.dst_size = DMAC_TRANS_SIZE_8; /* Transfer destination transfer size */
+ }
+ else if (size == 1)
+ {
+ trans_info.src_size = DMAC_TRANS_SIZE_16; /* Transfer source transfer size */
+ trans_info.dst_size = DMAC_TRANS_SIZE_16; /* Transfer destination transfer size */
+ }
+ else if (size == 2)
+ {
+ trans_info.src_size = DMAC_TRANS_SIZE_32; /* Transfer source transfer size */
+ trans_info.dst_size = DMAC_TRANS_SIZE_32; /* Transfer destination transfer size */
+ }
+ else
+ {
+ printf("size error!!\n");
+ }
+#else
+ if (dfacc == 2)
+ {
+ /* 32byte access */
+ trans_info.src_size = DMAC_TRANS_SIZE_256; /* Transfer source transfer size */
+ trans_info.dst_size = DMAC_TRANS_SIZE_256; /* Transfer destination transfer size */
+ }
+ else if (dfacc == 1)
+ {
+ /* 16byte access */
+ trans_info.src_size = DMAC_TRANS_SIZE_128; /* Transfer source transfer size */
+ trans_info.dst_size = DMAC_TRANS_SIZE_128; /* Transfer destination transfer size */
+ }
+ else
+ {
+ /* normal access */
+ if (size == 0)
+ {
+ trans_info.src_size = DMAC_TRANS_SIZE_8; /* Transfer source transfer size */
+ trans_info.dst_size = DMAC_TRANS_SIZE_8; /* Transfer destination transfer size */
+ }
+ else if (size == 1)
+ {
+ trans_info.src_size = DMAC_TRANS_SIZE_16; /* Transfer source transfer size */
+ trans_info.dst_size = DMAC_TRANS_SIZE_16; /* Transfer destination transfer size */
+ }
+ else if (size == 2)
+ {
+ trans_info.src_size = DMAC_TRANS_SIZE_32; /* Transfer source transfer size */
+ trans_info.dst_size = DMAC_TRANS_SIZE_32; /* Transfer destination transfer size */
+ }
+ else
+ {
+ printf("size error!!\n");
+ }
+ }
+#endif
+
+ if (dir == USB_FUNCTION_FIFO2BUF)
+ {
+ request_factor =DMAC_REQ_USB1_DMA0_RX; /* USB_0 channel 0 receive FIFO full */
+ trans_info.saddr_dir = DMAC_TRANS_ADR_NO_INC; /* Count direction of transfer source address */
+ trans_info.daddr_dir = DMAC_TRANS_ADR_INC; /* Count direction of transfer destination address */
+ }
+ else if (dir == USB_FUNCTION_BUF2FIFO)
+ {
+ request_factor =DMAC_REQ_USB1_DMA0_TX; /* USB_0 channel 0 receive FIFO empty */
+ trans_info.saddr_dir = DMAC_TRANS_ADR_INC; /* Count direction of transfer source address */
+ trans_info.daddr_dir = DMAC_TRANS_ADR_NO_INC; /* Count direction of transfer destination address */
+ }
+ else
+ {
+ /* Do Nothing */
+ }
+
+ /* ==== DMAC initialization ==== */
+ usb1_function_DMAC3_PeriReqInit((const dmac_transinfo_t *)&trans_info,
+ DMAC_MODE_REGISTER,
+ DMAC_SAMPLE_SINGLE,
+ request_factor,
+ 0); /* Don't care DMAC_REQ_REQD is setting in
+ usb1_function_DMAC3_PeriReqInit() */
+
+ /* ==== DMAC startup ==== */
+ ret = usb1_function_DMAC3_Open(DMAC_REQ_MODE_PERI);
+ if (ret != 0)
+ {
+ printf("DMAC3 Open error!!\n");
+ }
+
+ return;
+}
+
+/*******************************************************************************
+* Function Name: usb1_function_enable_dmac1
+* Description : Enables DMA transfer on the information specified by the argument.
+* Arguments : uint32_t src : src address
+* : uint32_t dst : dst address
+* : uint32_t count : transfer byte
+* : uint32_t size : transfer size
+* : uint32_t dir : direction
+* : uint32_t fifo : FIFO(D0FIFO or D1FIFO)
+* : uint16_t dfacc : 0 : normal access
+* : : 1 : 16byte access
+* : : 2 : 32byte access
+* Return Value : none
+*******************************************************************************/
+static void usb1_function_enable_dmac1 (uint32_t src, uint32_t dst, uint32_t count,
+ uint32_t size, uint32_t dir, uint32_t fifo, uint16_t dfacc)
+{
+ dmac_transinfo_t trans_info;
+ uint32_t request_factor = 0;
+ int32_t ret;
+
+ /* ==== Variable setting for DMAC initialization ==== */
+ trans_info.src_addr = (uint32_t)src; /* Start address of transfer source */
+ trans_info.dst_addr = (uint32_t)dst; /* Start address of transfer destination */
+ trans_info.count = (uint32_t)count; /* Total byte count to be transferred */
+#ifndef __USB_FUNCTION_DF_ACC_ENABLE__
+ if (size == 0)
+ {
+ trans_info.src_size = DMAC_TRANS_SIZE_8; /* Transfer source transfer size */
+ trans_info.dst_size = DMAC_TRANS_SIZE_8; /* Transfer destination transfer size */
+ }
+ else if (size == 1)
+ {
+ trans_info.src_size = DMAC_TRANS_SIZE_16; /* Transfer source transfer size */
+ trans_info.dst_size = DMAC_TRANS_SIZE_16; /* Transfer destination transfer size */
+ }
+ else if (size == 2)
+ {
+ trans_info.src_size = DMAC_TRANS_SIZE_32; /* Transfer source transfer size */
+ trans_info.dst_size = DMAC_TRANS_SIZE_32; /* Transfer destination transfer size */
+ }
+ else
+ {
+ printf("size error!!\n");
+ }
+#else
+ if (dfacc == 2)
+ {
+ /* 32byte access */
+ trans_info.src_size = DMAC_TRANS_SIZE_256; /* Transfer source transfer size */
+ trans_info.dst_size = DMAC_TRANS_SIZE_256; /* Transfer destination transfer size */
+ }
+ else if (dfacc == 1)
+ {
+ /* 16byte access */
+ trans_info.src_size = DMAC_TRANS_SIZE_128; /* Transfer source transfer size */
+ trans_info.dst_size = DMAC_TRANS_SIZE_128; /* Transfer destination transfer size */
+ }
+ else
+ {
+ /* normal access */
+ if (size == 0)
+ {
+ trans_info.src_size = DMAC_TRANS_SIZE_8; /* Transfer source transfer size */
+ trans_info.dst_size = DMAC_TRANS_SIZE_8; /* Transfer destination transfer size */
+ }
+ else if (size == 1)
+ {
+ trans_info.src_size = DMAC_TRANS_SIZE_16; /* Transfer source transfer size */
+ trans_info.dst_size = DMAC_TRANS_SIZE_16; /* Transfer destination transfer size */
+ }
+ else if (size == 2)
+ {
+ trans_info.src_size = DMAC_TRANS_SIZE_32; /* Transfer source transfer size */
+ trans_info.dst_size = DMAC_TRANS_SIZE_32; /* Transfer destination transfer size */
+ }
+ else
+ {
+ printf("size error!!\n");
+ }
+ }
+#endif
+
+ if (dir == USB_FUNCTION_FIFO2BUF)
+ {
+ request_factor =DMAC_REQ_USB1_DMA1_RX; /* USB_0 channel 0 receive FIFO full */
+ trans_info.saddr_dir = DMAC_TRANS_ADR_NO_INC; /* Count direction of transfer source address */
+ trans_info.daddr_dir = DMAC_TRANS_ADR_INC; /* Count direction of transfer destination address */
+ }
+ else if (dir == USB_FUNCTION_BUF2FIFO)
+ {
+ request_factor =DMAC_REQ_USB1_DMA1_TX; /* USB_0 channel 0 receive FIFO empty */
+ trans_info.saddr_dir = DMAC_TRANS_ADR_INC; /* Count direction of transfer source address */
+ trans_info.daddr_dir = DMAC_TRANS_ADR_NO_INC; /* Count direction of transfer destination address */
+ }
+ else
+ {
+ /* Do Nothing */
+ }
+
+ /* ==== DMAC initialization ==== */
+ usb1_function_DMAC4_PeriReqInit((const dmac_transinfo_t *)&trans_info,
+ DMAC_MODE_REGISTER,
+ DMAC_SAMPLE_SINGLE,
+ request_factor,
+ 0); /* Don't care DMAC_REQ_REQD is setting in
+ usb1_function_DMAC4_PeriReqInit() */
+
+ /* ==== DMAC startup ==== */
+ ret = usb1_function_DMAC4_Open(DMAC_REQ_MODE_PERI);
+ if (ret != 0)
+ {
+ printf("DMAC4 Open error!!\n");
+ }
+
+ return;
+}
+
+/*******************************************************************************
+* Function Name: Userdef_USB_usb1_function_stop_dma0
+* Description : Disables DMA transfer.
+* : This function should be executed to DMAC executed at the time
+* : of specification of D0_FIF0_DMA in dma->fifo.
+* Arguments : none
+* Return Value : uint32_t return Transfer Counter register(DMATCRn) value
+* : regarding to the bus width.
+*******************************************************************************/
+uint32_t Userdef_USB_usb1_function_stop_dma0 (void)
+{
+ uint32_t remain;
+
+ /* ==== DMAC release ==== */
+ usb1_function_DMAC3_Close(&remain);
+
+ return remain;
+}
+
+/*******************************************************************************
+* Function Name: Userdef_USB_usb1_function_stop_dma1
+* Description : Disables DMA transfer.
+* : This function should be executed to DMAC executed at the time
+* : of specification of D1_FIF0_DMA in dma->fifo.
+* Arguments : none
+* Return Value : uint32_t return Transfer Counter register(DMATCRn) value
+* : regarding to the bus width.
+*******************************************************************************/
+uint32_t Userdef_USB_usb1_function_stop_dma1 (void)
+{
+ uint32_t remain;
+
+ /* ==== DMAC release ==== */
+ usb1_function_DMAC4_Close(&remain);
+
+ return remain;
+}
+
+/* End of File */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/USBDevice/TARGET_RENESAS/TARGET_VK_RZ_A1H/usb_function_setting.h Fri Apr 29 01:16:25 2016 +0100
@@ -0,0 +1,173 @@
+/*******************************************************************************
+* DISCLAIMER
+* This software is supplied by Renesas Electronics Corporation and is only
+* intended for use with Renesas products. No other uses are authorized. This
+* software is owned by Renesas Electronics Corporation and is protected under
+* all applicable laws, including copyright laws.
+* THIS SOFTWARE IS PROVIDED "AS IS" AND RENESAS MAKES NO WARRANTIES REGARDING
+* THIS SOFTWARE, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING BUT NOT
+* LIMITED TO WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE
+* AND NON-INFRINGEMENT. ALL SUCH WARRANTIES ARE EXPRESSLY DISCLAIMED.
+* TO THE MAXIMUM EXTENT PERMITTED NOT PROHIBITED BY LAW, NEITHER RENESAS
+* ELECTRONICS CORPORATION NOR ANY OF ITS AFFILIATED COMPANIES SHALL BE LIABLE
+* FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR
+* ANY REASON RELATED TO THIS SOFTWARE, EVEN IF RENESAS OR ITS AFFILIATES HAVE
+* BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
+* Renesas reserves the right, without notice, to make changes to this software
+* and to discontinue the availability of this software. By using this software,
+* you agree to the additional terms and conditions found by accessing the
+* following link:
+* http://www.renesas.com/disclaimer
+* Copyright (C) 2014 - 2015 Renesas Electronics Corporation. All rights reserved.
+*******************************************************************************/
+
+#ifndef USB_FUNCTION_SETTING_H
+#define USB_FUNCTION_SETTING_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#define USB_FUNCTION_CH 0
+#define USB_FUNCTION_HISPEED 1
+
+#if (USB_FUNCTION_CH == 0)
+#include "usb0_function.h"
+#define USB20X USB200
+#define USBIX_IRQn USBI0_IRQn
+#define g_usbx_function_bit_set g_usb0_function_bit_set
+#define g_usbx_function_PipeDataSize g_usb0_function_PipeDataSize
+#define g_usbx_function_data_count g_usb0_function_data_count
+#define g_usbx_function_PipeTbl g_usb0_function_PipeTbl
+#define g_usbx_function_DmaStatus g_usb0_function_DmaStatus
+#define g_usbx_function_pipecfg g_usb0_function_pipecfg
+#define g_usbx_function_pipe_status g_usb0_function_pipe_status
+#define g_usbx_function_data_pointer g_usb0_function_data_pointer
+#define g_usbx_function_pipebuf g_usb0_function_pipebuf
+#define g_usbx_function_pipemaxp g_usb0_function_pipemaxp
+#define g_usbx_function_pipeperi g_usb0_function_pipeperi
+#define g_usbx_function_TestModeFlag g_usb0_function_TestModeFlag
+#define usbx_function_BRDYInterruptPIPE0 usb0_function_BRDYInterruptPIPE0
+#define usbx_function_BRDYInterrupt usb0_function_BRDYInterrupt
+#define usbx_function_NRDYInterruptPIPE0 usb0_function_NRDYInterruptPIPE0
+#define usbx_function_NRDYInterrupt usb0_function_NRDYInterrupt
+#define usbx_function_BEMPInterruptPIPE0 usb0_function_BEMPInterruptPIPE0
+#define usbx_function_BEMPInterrupt usb0_function_BEMPInterrupt
+#define usbx_function_read_buffer_c usb0_function_read_buffer_c
+#define usbx_function_set_pid_buf usb0_function_set_pid_buf
+#define usbx_function_disable_brdy_int usb0_function_disable_brdy_int
+#define usbx_function_set_pid_stall usb0_function_set_pid_stall
+#define usbx_function_dma_interrupt_d0fifo usb0_function_dma_interrupt_d0fifo
+#define usbx_function_read_dma usb0_function_read_dma
+#define usbx_function_dma_interrupt_d1fifo usb0_function_dma_interrupt_d1fifo
+#define usbx_function_write_buffer usb0_function_write_buffer
+#define usbx_function_set_pid_nak usb0_function_set_pid_nak
+#define usbx_function_get_mbw usb0_function_get_mbw
+#define usbx_function_set_curpipe usb0_function_set_curpipe
+#define usbx_function_aclrm usb0_function_aclrm
+#define usbx_function_enable_nrdy_int usb0_function_enable_nrdy_int
+#define usbx_function_enable_brdy_int usb0_function_enable_brdy_int
+#define usbx_function_get_pid usb0_function_get_pid
+#define usbx_function_get_inbuf usb0_function_get_inbuf
+#define usbx_function_disable_bemp_int usb0_function_disable_bemp_int
+#define usbx_function_EpToPipe usb0_function_EpToPipe
+#define usbx_function_clear_pipe_tbl usb0_function_clear_pipe_tbl
+#define Userdef_USB_usbx_function_d0fifo_dmaintid Userdef_USB_usb0_function_d0fifo_dmaintid
+#define Userdef_USB_usbx_function_d1fifo_dmaintid Userdef_USB_usb0_function_d1fifo_dmaintid
+#define usbx_function_reset_module usb0_function_reset_module
+#define usbx_function_init_status usb0_function_init_status
+#define usbx_function_InitModule usb0_function_InitModule
+#define usbx_function_clear_alt usb0_function_clear_alt
+#define usbx_function_set_sqclr usb0_function_set_sqclr
+#define usbx_api_function_CtrlWriteStart usb0_api_function_CtrlWriteStart
+#define usbx_api_function_CtrlReadStart usb0_api_function_CtrlReadStart
+#define usbx_function_write_buffer_c usb0_function_write_buffer_c
+#define usbx_api_function_check_pipe_status usb0_api_function_check_pipe_status
+#define usbx_api_function_set_pid_nak usb0_api_function_set_pid_nak
+#define usbx_api_function_clear_pipe_status usb0_api_function_clear_pipe_status
+#define usbx_api_function_start_receive_transfer usb0_api_function_start_receive_transfer
+#define usbx_function_read_buffer usb0_function_read_buffer
+#define usbx_api_function_start_send_transfer usb0_api_function_start_send_transfer
+#define usbx_function_stop_transfer usb0_function_stop_transfer
+#define usbx_function_clear_pid_stall usb0_function_clear_pid_stall
+#define usbx_function_CheckVBUStaus usb0_function_CheckVBUStaus
+#define usbx_function_USB_FUNCTION_Attach usb0_function_USB_FUNCTION_Attach
+#define usbx_function_USB_FUNCTION_Detach usb0_function_USB_FUNCTION_Detach
+#define usbx_function_is_hispeed usb0_function_is_hispeed
+#define usbx_function_ResetDescriptor usb0_function_ResetDescriptor
+#define usbx_function_USB_FUNCTION_Suspend usb0_function_USB_FUNCTION_Suspend
+#define usbx_function_USB_FUNCTION_TestMode usb0_function_USB_FUNCTION_TestMode
+#else
+#include "usb1_function.h"
+#define USB20X USB201
+#define USBIX_IRQn USBI1_IRQn
+#define g_usbx_function_bit_set g_usb1_function_bit_set
+#define g_usbx_function_PipeDataSize g_usb1_function_PipeDataSize
+#define g_usbx_function_data_count g_usb1_function_data_count
+#define g_usbx_function_PipeTbl g_usb1_function_PipeTbl
+#define g_usbx_function_DmaStatus g_usb1_function_DmaStatus
+#define g_usbx_function_pipecfg g_usb1_function_pipecfg
+#define g_usbx_function_pipe_status g_usb1_function_pipe_status
+#define g_usbx_function_data_pointer g_usb1_function_data_pointer
+#define g_usbx_function_pipebuf g_usb1_function_pipebuf
+#define g_usbx_function_pipemaxp g_usb1_function_pipemaxp
+#define g_usbx_function_pipeperi g_usb1_function_pipeperi
+#define g_usbx_function_TestModeFlag g_usb1_function_TestModeFlag
+#define usbx_function_BRDYInterruptPIPE0 usb1_function_BRDYInterruptPIPE0
+#define usbx_function_BRDYInterrupt usb1_function_BRDYInterrupt
+#define usbx_function_NRDYInterruptPIPE0 usb1_function_NRDYInterruptPIPE0
+#define usbx_function_NRDYInterrupt usb1_function_NRDYInterrupt
+#define usbx_function_BEMPInterruptPIPE0 usb1_function_BEMPInterruptPIPE0
+#define usbx_function_BEMPInterrupt usb1_function_BEMPInterrupt
+#define usbx_function_read_buffer_c usb1_function_read_buffer_c
+#define usbx_function_set_pid_buf usb1_function_set_pid_buf
+#define usbx_function_disable_brdy_int usb1_function_disable_brdy_int
+#define usbx_function_set_pid_stall usb1_function_set_pid_stall
+#define usbx_function_dma_interrupt_d0fifo usb1_function_dma_interrupt_d0fifo
+#define usbx_function_read_dma usb1_function_read_dma
+#define usbx_function_dma_interrupt_d1fifo usb1_function_dma_interrupt_d1fifo
+#define usbx_function_write_buffer usb1_function_write_buffer
+#define usbx_function_set_pid_nak usb1_function_set_pid_nak
+#define usbx_function_get_mbw usb1_function_get_mbw
+#define usbx_function_set_curpipe usb1_function_set_curpipe
+#define usbx_function_aclrm usb1_function_aclrm
+#define usbx_function_enable_nrdy_int usb1_function_enable_nrdy_int
+#define usbx_function_enable_brdy_int usb1_function_enable_brdy_int
+#define usbx_function_get_pid usb1_function_get_pid
+#define usbx_function_get_inbuf usb1_function_get_inbuf
+#define usbx_function_disable_bemp_int usb1_function_disable_bemp_int
+#define usbx_function_EpToPipe usb1_function_EpToPipe
+#define usbx_function_clear_pipe_tbl usb1_function_clear_pipe_tbl
+#define Userdef_USB_usbx_function_d0fifo_dmaintid Userdef_USB_usb1_function_d0fifo_dmaintid
+#define Userdef_USB_usbx_function_d1fifo_dmaintid Userdef_USB_usb1_function_d1fifo_dmaintid
+#define usbx_function_reset_module usb1_function_reset_module
+#define usbx_function_init_status usb1_function_init_status
+#define usbx_function_InitModule usb1_function_InitModule
+#define usbx_function_clear_alt usb1_function_clear_alt
+#define usbx_function_set_sqclr usb1_function_set_sqclr
+#define usbx_api_function_CtrlWriteStart usb1_api_function_CtrlWriteStart
+#define usbx_api_function_CtrlReadStart usb1_api_function_CtrlReadStart
+#define usbx_function_write_buffer_c usb1_function_write_buffer_c
+#define usbx_api_function_check_pipe_status usb1_api_function_check_pipe_status
+#define usbx_api_function_set_pid_nak usb1_api_function_set_pid_nak
+#define usbx_api_function_clear_pipe_status usb1_api_function_clear_pipe_status
+#define usbx_api_function_start_receive_transfer usb1_api_function_start_receive_transfer
+#define usbx_function_read_buffer usb1_function_read_buffer
+#define usbx_api_function_start_send_transfer usb1_api_function_start_send_transfer
+#define usbx_function_stop_transfer usb1_function_stop_transfer
+#define usbx_function_clear_pid_stall usb1_function_clear_pid_stall
+#define usbx_function_CheckVBUStaus usb1_function_CheckVBUStaus
+#define usbx_function_USB_FUNCTION_Attach usb1_function_USB_FUNCTION_Attach
+#define usbx_function_USB_FUNCTION_Detach usb1_function_USB_FUNCTION_Detach
+#define usbx_function_is_hispeed usb1_function_is_hispeed
+#define usbx_function_ResetDescriptor usb1_function_ResetDescriptor
+#define usbx_function_USB_FUNCTION_Suspend usb1_function_USB_FUNCTION_Suspend
+#define usbx_function_USB_FUNCTION_TestMode usb1_function_USB_FUNCTION_TestMode
+#endif
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* USB_FUNCTION_SETTING_H */
--- a/USBDevice/USBEndpoints.h Thu Feb 18 09:45:59 2016 +0000 +++ b/USBDevice/USBEndpoints.h Fri Apr 29 01:16:25 2016 +0100 @@ -45,7 +45,7 @@ #include "USBEndpoints_KL25Z.h" #elif defined (TARGET_STM32F4) #include "USBEndpoints_STM32F4.h" -#elif defined (TARGET_RZ_A1H) +#elif defined (TARGET_RZ_A1H) || defined (TARGET_VK_RZ_A1H) #include "USBEndpoints_RZ_A1H.h" #elif defined(TARGET_Maxim) #include "USBEndpoints_Maxim.h"
--- a/USBDevice/USBHAL_RZ_A1H.cpp Thu Feb 18 09:45:59 2016 +0000 +++ b/USBDevice/USBHAL_RZ_A1H.cpp Fri Apr 29 01:16:25 2016 +0100 @@ -23,7 +23,7 @@ * SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. */ -#if defined(TARGET_RZ_A1H) +#if defined(TARGET_RZ_A1H) || defined(TARGET_VK_RZ_A1H) /* This class can use the pipe1, pipe3 and pipe6 only. You should