ENSMM
BLE test for specific board mheuve sensor ENSMM CROC
Dependencies: mbed Driver_BLE_Mheuve BLE_API
These two pictures show how to connect the Mheuve Sensor to the ST-Link debugger (don't forget to disable ST-link jumpers and JP5 on the board! ):
These two pictures show how to connect the Mheuve Sensor TX RX to the ST-Link debugger (don't forget to cross TX and RX, it means Mheuve sensor TX on ST-Link RX and ST-Link TX on Mheuve sensor RX ):
The Mheuve sensor board needs to be powered by an external battery.
The result appears on a BLE terminal smartphone application (like BLE terminal on Android) under BLE UART specification data, it prints periodically "coucou".
Revision 0:25d5fe1d290e, committed 2021-01-27
- Comitter:
- jimbaud
- Date:
- Wed Jan 27 09:58:19 2021 +0000
- Commit message:
- BLE test for specific board mheuve sensor ENSMM CROC
Changed in this revision
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/BLE_API.lib Wed Jan 27 09:58:19 2021 +0000 @@ -0,0 +1,1 @@ +http://mbed.org/teams/Bluetooth-Low-Energy/code/BLE_API/#65474dc93927
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/Driver_BLE_Mheuve.lib Wed Jan 27 09:58:19 2021 +0000 @@ -0,0 +1,1 @@ +https://os.mbed.com/teams/ENSMM/code/Driver_BLE_Mheuve/#281329434366
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp Wed Jan 27 09:58:19 2021 +0000
@@ -0,0 +1,174 @@
+#include "mbed.h"
+#include "ble/BLE.h"
+#include "ble/services/UARTService.h"
+#include "Serial.h"
+#include "stdlib.h"
+
+#define UART_BUFFER (UARTService::BLE_UART_SERVICE_MAX_DATA_LEN)
+
+
+const static char DEVICE_NAME[] = "Mheuve";
+UARTService *uartServicePtr;
+
+//PWM output
+
+DigitalOut Green(PC_4); //Red LED
+DigitalOut Red(PC_5); //Green LED
+
+Ticker tempo;
+
+// Tableau et index de communication avec UART
+static char uartBuff[UART_BUFFER];
+
+// Routine de traitement des erreurs
+void onBleError(ble_error_t error);
+
+/****************************************************/
+/* Ticker actif lorsque la connexion BLE est présente */
+/****************************************************/
+void ConnectedBLE(void)
+{
+ // Signal de vie: allumer et éteindre la LED
+ Red = 0;
+ Green = 1 ;
+
+}
+
+void message(void)
+{
+ //Integre les trois chaines de caractere contenant les accelerations dans la chaine uartBuff
+ sprintf(uartBuff, "coucou") ;
+ //Envoie la chaine uartBuff sur le sevice TX UART BLE
+ uartServicePtr->write(uartBuff, UARTService::BLE_UART_SERVICE_MAX_DATA_LEN);
+ // Réinitialiser la chaîne uartBuff en entrant 0 dans les premiers caractères UART_BUFFER
+ memset(uartBuff, 0, UART_BUFFER);
+
+}
+
+/*************************/
+/* Connexion BLE réussie */
+/*************************/
+void BleConnectionCallback(const Gap::ConnectionCallbackParams_t *params)
+{
+ // Signal de connexion BLE: allume / éteint la LED avec une période de 1 seconde
+ ConnectedBLE();
+ tempo.attach(message, 1);
+}
+
+/*****************************/
+/* Déconnexion du client BLE */
+/*****************************/
+void BleDisconnectionCallback(const Gap::DisconnectionCallbackParams_t *params)
+{
+ (void)params;
+ // Redémarrer la publicité
+ tempo.detach();
+ BLE::Instance().gap().startAdvertising();
+
+ Green = 0;
+ Red = 1;
+
+}
+
+/***************************/
+/* Rx de BLE et Rx vers USB*/
+/***************************/
+void BleOnDataWrittenCallback(const GattWriteCallbackParams *params)
+{
+ char reception[UART_BUFFER];
+ char commande[2];
+ float valeur;
+
+ // Reçoit une chaîne de BLE
+ if (params->handle == uartServicePtr->getTXCharacteristicHandle()) {
+ // Copie de la chaine reçue dans reception
+ sprintf(reception,"%s", params->data);
+ // Copie dans la chaine commande des deux premier caracteres de la chaine reception
+ sprintf(commande,"%c%c", reception[0], reception[1]);
+ // Transformation des 3 caracteres suivants en valeur numerique
+ valeur = ((reception[2] - '0')* 100 + (reception[3] - '0')* 10 +(reception[4] - '0')) ;
+ valeur = valeur/255;
+
+ if( strcmp(commande, "LR")==0) {
+
+ }
+ if( strcmp(commande, "LV")==0) {
+
+ }
+
+ }
+}
+
+/***************************/
+/* Erreur sur le canal BLE */
+/***************************/
+
+void onBleError(ble_error_t error)
+{
+ Red = 1;
+
+ /* Entrer le traitement des erreurs */
+}
+
+/**************************************/
+/* Initialisation du service BLE UART */
+/**************************************/
+
+void bleInitComplete(BLE::InitializationCompleteCallbackContext *params)
+{
+ BLE& ble = params->ble;
+ ble_error_t error = params->error;
+
+ if (error != BLE_ERROR_NONE) {
+
+ /* En cas d'erreur, transmettez le traitement d'erreur à onBleInitError*/
+ onBleError(error);
+ return;
+ }
+
+ /* Assurez-vous qu'il s'agit de l'instance par défaut de BLE */
+ if(ble.getInstanceID() != BLE::DEFAULT_INSTANCE) {
+ return;
+ }
+
+ ble.gap().onConnection(BleConnectionCallback);
+ ble.gap().onDisconnection(BleDisconnectionCallback);
+ ble.gattServer().onDataWritten(BleOnDataWrittenCallback);
+
+ /* Configuration du service primaire. */
+ UARTService uartService(ble);
+ uartServicePtr = &uartService;
+
+ /* Configurer la publicité */
+ ble.gap().accumulateAdvertisingPayload(GapAdvertisingData::BREDR_NOT_SUPPORTED | GapAdvertisingData::LE_GENERAL_DISCOVERABLE);
+ ble.gap().accumulateAdvertisingPayload(GapAdvertisingData::COMPLETE_LIST_16BIT_SERVICE_IDS, (uint8_t *)UARTServiceUUID_reversed, sizeof(UARTServiceUUID_reversed));
+ ble.gap().accumulateAdvertisingPayload(GapAdvertisingData::COMPLETE_LOCAL_NAME, (uint8_t *)DEVICE_NAME, sizeof(DEVICE_NAME));
+ ble.gap().setAdvertisingType(GapAdvertisingParams::ADV_CONNECTABLE_UNDIRECTED);
+ ble.gap().setAdvertisingInterval(500); /* 500ms. */
+ ble.gap().startAdvertising();
+
+ // Attend les événements sur BLE
+ while (true) {
+ ble.waitForEvent();
+ }
+}
+
+/********/
+/* MAIN */
+/********/
+int main(void)
+{
+
+ // Initialiser LED
+ Green = 0;
+ Red = 1;
+
+
+
+ /****** START Initialiser BLE **********/
+ BLE &ble = BLE::Instance();
+ ble.init(bleInitComplete);
+ /******* FIN initialise BLE ***********/
+
+}
+
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/mbed.bld Wed Jan 27 09:58:19 2021 +0000 @@ -0,0 +1,1 @@ +https://os.mbed.com/users/mbed_official/code/mbed/builds/65be27845400 \ No newline at end of file