CQ Publishing
Transistor Gijutsu, October 2014, Special Features Chapter 9， Software of the Function Generator トランジスタ技術2014年10月号 特集第9章のソフトウェア わがまま波形発生器のソフトウェア
Information
tg_201410s8_AD7714 トランジスタ技術 2014年 10月号 第9章のソフトウェア
Program for Section 9 in October. 2014 issue of the Transistor Gijutsu
(Japanese electronics magazine)
概要
このプログラムは、ソフトウエアDDSにより、任意の波形を出力（2ch）します。 特徴は次のとおりです。
- PWM出力をDAコンバータとして利用します。
- 周波数や波形、バースト条件などを個別に設定できる独立した出力を２チャネル持っています。
- 周波数分解能0.023ｍHz
- 周波数範囲0.023ｍHz～１０ｋHz
- 各チャネルにそれぞれ、波形の先頭で出力されるトリガ出力があります。
- 出力波形を関数で定義できます。
- 休止波数、出力波数、を設定することでバースト波形が出力できます。
ファイル
このソフトウエアは、次のファイルから構成されています。
- DDS.cpp - DDSによる波形発生
- main.cpp - main()関数
詳細については、10月号の記事および上記ファイル中のコメントを参照してください。
Revision 0:f1ecca559ec3, committed 2014-08-29
- Comitter:
- Dance
- Date:
- Fri Aug 29 08:33:17 2014 +0000
- Commit message:
- Transistor Gijutsu, October 2014, Special Features Chapter 9; ????????2014?10??????9????????
Changed in this revision
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/DDS.lib Fri Aug 29 08:33:17 2014 +0000 @@ -0,0 +1,1 @@ +DDS
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/DDS/DDS.cpp Fri Aug 29 08:33:17 2014 +0000
@@ -0,0 +1,259 @@
+#include "mbed.h"
+#include "USBSerial.h"
+#include "DDS.h"
+#include "DigitalOut.h"
+#include "math.h"
+
+DigitalOut out1(P0_2); // osc1のトリガ出力ピン
+DigitalOut out2(P0_23); // osc2のトリガ出力ピン
+
+// 最適化指定。DDS基準周波数100kHzに必要。
+#pragma O3
+
+// スタティック変数の領域確保
+int16_t DDS::waveForm1[DDS::TBLSIZE];
+unsigned int DDS::phaseAcc1 = 0;
+unsigned int DDS::phaseInc1 = 0;
+unsigned int DDS::phaseShift1 = 0;
+int DDS::bstBgn1;
+int DDS::bstEnd1;
+int DDS::bstLen1;
+int DDS::bstDcL1;
+int DDS::trigger1;
+int DDS::wc1;
+int DDS::lp1;
+
+int16_t DDS::waveForm2[DDS::TBLSIZE];
+unsigned int DDS::phaseAcc2 = 0;
+unsigned int DDS::phaseInc2 = 0;
+unsigned int DDS::phaseShift2 = 0;
+int DDS::bstBgn2;
+int DDS::bstEnd2;
+int DDS::bstLen2;
+int DDS::bstDcL2;
+int DDS::trigger2;
+int DDS::wc2;
+int DDS::lp2;
+
+
+// 割り込みハンドラ
+void PWM1_IRQHandler (void)
+{
+ static int pw1 = 1;
+ static int pw2 = 1;
+ LPC_CT32B1->IR |= 0x01; // 割り込み要因のリセット
+ LPC_CT32B1->MR1 = pw1; // PWM1パルス幅変更
+ LPC_CT32B1->MR2 = pw2; // PWM2パルス幅変更
+ out1 = DDS::trigger1; // トリガパルス出力
+ out2 = DDS::trigger2;
+ DDS::trigger1 = 0; // トリガ要因リセット
+ DDS::trigger2 = 0;
+
+ // 次のPWM幅とトリガ要因を計算
+ pw1 = DDS::getNextPw1();
+ pw2 = DDS::getNextPw2();
+ // トリガパルス終了。パルス幅はPWM計算時間。
+ out1 = 0;
+ out2 = 0;
+}
+
+// osc1次のパルス幅を得る
+inline int DDS::getNextPw1(void)
+{
+ static int ret = 0;
+
+ // 位相の更新
+ phaseAcc1 += phaseInc1;
+ // バースト信号処理
+ if(bstBgn1 <= wc1 && wc1 <= bstEnd1){
+ ret = waveForm1[(phaseAcc1 + phaseShift1)>> WFRES];
+ }else{
+ ret = bstDcL1;
+ }
+ if(lp1 > phaseAcc1){
+ // バースト出力の先頭でトリガパルスを発生する
+ wc1++;
+ if(wc1 > bstLen1){
+ wc1 = 1;
+ trigger1 = 1;
+ }
+ }
+ lp1 = phaseAcc1;
+
+ return ret;
+};
+
+// osc2次のパルス幅を得る
+inline int DDS::getNextPw2(void)
+{
+ static int ret = 0;
+
+ phaseAcc2 += phaseInc2;
+ if(bstBgn2 <= wc2 && wc2 <= bstEnd2){
+ ret = waveForm2[(phaseAcc2 + phaseShift2) >> WFRES];
+ }else{
+ ret = bstDcL2;
+ }
+ if(lp2 > phaseAcc2){
+ wc2++;
+ if(wc2 > bstLen2){
+ wc2 = 1;
+ trigger2 = 1;
+ }
+ }
+ lp2 = phaseAcc2;
+ return ret;
+};
+
+void DDS::reset(void)
+{
+ // 割り込みを停止してから変数を初期化
+ NVIC_DisableIRQ(TIMER_32_1_IRQn);
+ phaseAcc1 = phaseAcc2 = 0;
+ wc1 = wc2 = 1;
+ lp1 = lp2 = 0xffffffff;
+ NVIC_EnableIRQ(TIMER_32_1_IRQn);
+}
+
+// osc1バースト波形の設定
+void DDS::burst1(int begin, int end, int length, float dcLevel)
+{
+ bstBgn1 = begin;
+ bstEnd1 = end;
+ bstLen1 = length;
+ bstDcL1 = WFVSPN - WFMAG * dcLevel * WFVSPN;
+}
+
+// osc1バースト波形の設定
+void DDS::burst2(int begin, int end, int length, float dcLevel)
+{
+ bstBgn2 = begin;
+ bstEnd2 = end;
+ bstLen2 = length;
+ bstDcL2 = WFVSPN - WFMAG * dcLevel * WFVSPN;
+}
+
+void DDS::fillTable(int16_t wftbl[], float level, float ofst, float (*wf)(float x))
+{
+ level = (level < -2.0) ? -2.0 : level;
+ level = (level > 2.0) ? 2.0 : level;
+
+ for(int a = 0; a < TBLSIZE; a++){
+ // ラジアンを引数として関数値を計算
+ float val = wf(2.0 * PI * a / TBLSIZE);
+ val = (val < -1.0) ? -1.0 : val;
+ val = (val > 1.0) ? 1.0 : val;
+ // PWMの極性に合わせるためvalの符号を反転し、PWM値に変換
+ //val = (level * val + ofst) * WFMAG * WFVSPN;
+ val = (level * val + ofst) * WFMAG * WFVSPN;
+ wftbl[a] = WFVSPN - val;
+ }
+}
+
+/// OSC1の波形定義
+void DDS::osc1(float f, float p, float level, float ofst, float (*wf)(float x))
+{
+ phaseInc1 = (PACCLEN / DDSCLK) * f;
+ if(p < 0){
+ p = 360 - p;
+ }
+ phaseShift1 = PACCLEN * p / 360.0;
+ fillTable(waveForm1, level, ofst, wf);
+}
+
+/// OSC2の波形定義
+void DDS::osc2(float f, float p, float level, float ofst, float (*wf)(float x))
+{
+ // 位相増分
+ phaseInc2 = (PACCLEN / DDSCLK) * f;
+ if(p < 0){
+ p = 360 - p;
+ }
+ phaseShift2 = PACCLEN * p / 360.0;
+ fillTable(waveForm2, level, ofst, wf);
+}
+
+void DDS::osc1(float freq, float phase)
+{
+ phaseInc1 = (PACCLEN / DDSCLK) * freq;
+ phaseShift1 = PACCLEN * phase / 360.0;
+}
+
+void DDS::osc2(float freq, float phase)
+{
+ phaseInc2 = (PACCLEN / DDSCLK) * freq;
+ phaseShift2 = PACCLEN * phase / 360.0;
+}
+
+// 三角波
+float triangle(float x)
+{
+ if(x < PI){
+ return 2.0 * x / PI - 1.0;
+ }else{
+ return 2.0 * (2 * PI - x) / PI - 1.0;
+ }
+}
+
+// 三角関数の合成による三角波
+float triangleSin(float x)
+{
+ x -= PI / 2.0;
+ return 8.0 / PI / PI * (sin(x) - sin(3.0 * x) / 9.0 + sin(5.0 * x) / 25.0);
+ //return 8.0 / PI / PI * (sin(x) - sin(3.0 * x) / 9.0 + sin(5.0 * x) / 25.0 - sin(7.0 * x) / 49.0 + sin(9.0 * x)/81.0);
+}
+
+// 方形波
+float square(float x)
+{
+ if(x < PI){
+ return 1.0;
+ }else{
+ return -1.0;
+ }
+}
+
+// コンソトラクタ、ハードウエアの初期化
+DDS::DDS(void)
+{
+ LPC_IOCON->TRST_PIO0_14 = 0x83; // P0_14 -> CT32B1_MAT1
+ LPC_IOCON->SWDIO_PIO0_15 = 0x83; // P0_15 -> CT32B1_MAT2
+ LPC_SYSCON->SYSAHBCLKCTRL |= 0x1 << 10; // Enable clock CT32B1
+ LPC_CT32B1->PWMC = 0xf; // Enable MAT0..3
+ LPC_CT32B1->MCR = 0x03; // MR0 reset & interrupt
+
+ LPC_CT32B1->PR = 0;
+ LPC_CT32B1->MR0 = WFVSPN - 1; // PWM周期
+ LPC_CT32B1->MR1 = WFVSPN / 2; // duty 50%
+ LPC_CT32B1->MR2 = WFVSPN / 2;
+ LPC_CT32B1->TCR = 0x02; // counter reset
+
+ // デフォルトのDDS波形は1kHz連続正弦波
+ trigger1 = 0;
+ burst1(1, 1, 1, 1.0);
+ osc1(1000.0, 0.0, 0.5, 1.0, sin);
+ trigger2 = 0;
+ burst2(1, 1, 1, 1.0);
+ osc2(2000.0, 0.0, 0.5, 1.0, sin);
+ reset();
+
+ // USB割り込みの優先順位を下げる。
+ NVIC_SetPriority(USB_IRQn, 3);
+ NVIC_SetPriority(USB_FIQn, 3);
+ NVIC_SetPriority(TIMER_32_1_IRQn, 0);
+
+ // 割り込み処理の登録と許可
+ NVIC_SetVector(TIMER_32_1_IRQn, (unsigned int)&PWM1_IRQHandler);
+ NVIC_EnableIRQ(TIMER_32_1_IRQn);
+}
+
+
+void DDS::start(void)
+{
+ LPC_CT32B1->TCR = 0x01; // counter enable
+}
+
+void DDS::stop(void)
+{
+ LPC_CT32B1->TCR = 0x02; // counter reset
+}
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/DDS/DDS.h Fri Aug 29 08:33:17 2014 +0000
@@ -0,0 +1,74 @@
+#ifndef DDS_h
+#define DDS_h
+
+#define PACCLEN (4294967296.0) // 位相積算レジスタの最大値 2^23
+#define PI (3.1415926535897932385) // 円周率
+
+// 出力電圧の設定
+#define VCC (3.27) // 電源電圧、実測
+#define BUFMAG (2.0) // 出力バッファの増幅率
+#define WFMAG (1.0/(VCC*BUFMAG)) // PWM値算出のための係数
+
+class DDS {
+private:
+ static const int MAINCLK = 48000000; // CPUのシステムクロック値
+ static const int DDSCLK = 100000; // DDSの基準クロック値
+ static const int TBLSIZEBITS = 10; // 波形配列の長さを決めるビット数
+ static const int WFVGND = 0; // バースト波形の無信号状態の出力値
+ // 以下は上の値から設定されるので変更不可
+ static const int TBLSIZE = 1 << TBLSIZEBITS;// 波形配列の長さ
+ static const int WFRES = 32 - TBLSIZEBITS; // 位相積算レジスタを波形配列の引数に変換するためのビットシフト値
+ static const int WFVSPN = MAINCLK / DDSCLK; // PWMの最大値
+
+ static int16_t waveForm1[];
+ static int16_t waveForm2[];
+
+ static unsigned int phaseAcc1;
+ static unsigned int phaseInc1;
+ static unsigned int phaseShift1;
+ static int bstBgn1;
+ static int bstEnd1;
+ static int bstLen1;
+ static int bstDcL1;
+ static int wc1;
+ static int lp1;
+
+ static unsigned int phaseAcc2;
+ static unsigned int phaseInc2;
+ static unsigned int phaseShift2;
+ static int bstBgn2;
+ static int bstEnd2;
+ static int bstLen2;
+ static int bstDcL2;
+ static int wc2;
+ static int lp2;
+
+ void fillTable(int16_t wftbl[], float level, float ofst, float (*waveform)(float x));
+
+public:
+ static int trigger1;
+ static int trigger2;
+
+ DDS();
+ static void start(void);
+ static void stop(void);
+ static void reset(void);
+ int getPhase(void){
+ return phaseAcc1;
+ };
+ static inline int getNextPw1(void);
+ static inline int getNextPw2(void);
+ void osc1(float freq, float phase, float level, float ofst, float (*waveform)(float x));
+ void osc1(float freq, float phase);
+ void osc2(float freq, float phase, float level, float ofst, float (*waveform)(float x));
+ void osc2(float freq, float phase);
+ void burst1(int begin, int end, int length, float dcLevel);
+ void burst2(int begin, int end, int length, float dcLevel);
+};
+
+float triangle(float x);
+float square(float x);
+
+
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/USBDevice.lib Fri Aug 29 08:33:17 2014 +0000 @@ -0,0 +1,1 @@ +http://mbed.org/users/mbed_official/code/USBDevice/#33920e3786aa
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/USBDevice/USBAudio/USBAudio.cpp Fri Aug 29 08:33:17 2014 +0000
@@ -0,0 +1,618 @@
+/* Copyright (c) 2010-2011 mbed.org, MIT License
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy of this software
+* and associated documentation files (the "Software"), to deal in the Software without
+* restriction, including without limitation the rights to use, copy, modify, merge, publish,
+* distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the
+* Software is furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in all copies or
+* substantial portions of the Software.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING
+* BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
+* DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+*/
+
+#include "stdint.h"
+#include "USBAudio.h"
+#include "USBAudio_Types.h"
+
+
+
+USBAudio::USBAudio(uint32_t frequency_in, uint8_t channel_nb_in, uint32_t frequency_out, uint8_t channel_nb_out, uint16_t vendor_id, uint16_t product_id, uint16_t product_release): USBDevice(vendor_id, product_id, product_release) {
+ mute = 0;
+ volCur = 0x0080;
+ volMin = 0x0000;
+ volMax = 0x0100;
+ volRes = 0x0004;
+ available = false;
+
+ FREQ_IN = frequency_in;
+ FREQ_OUT = frequency_out;
+
+ this->channel_nb_in = channel_nb_in;
+ this->channel_nb_out = channel_nb_out;
+
+ // stereo -> *2, mono -> *1
+ PACKET_SIZE_ISO_IN = (FREQ_IN / 500) * channel_nb_in;
+ PACKET_SIZE_ISO_OUT = (FREQ_OUT / 500) * channel_nb_out;
+
+ // STEREO -> left and right
+ channel_config_in = (channel_nb_in == 1) ? CHANNEL_M : CHANNEL_L + CHANNEL_R;
+ channel_config_out = (channel_nb_out == 1) ? CHANNEL_M : CHANNEL_L + CHANNEL_R;
+
+ SOF_handler = false;
+
+ buf_stream_out = NULL;
+ buf_stream_in = NULL;
+
+ interruptOUT = false;
+ writeIN = false;
+ interruptIN = false;
+ available = false;
+
+ volume = 0;
+
+ // connect the device
+ USBDevice::connect();
+}
+
+bool USBAudio::read(uint8_t * buf) {
+ buf_stream_in = buf;
+ SOF_handler = false;
+ while (!available || !SOF_handler);
+ available = false;
+ return true;
+}
+
+bool USBAudio::readNB(uint8_t * buf) {
+ buf_stream_in = buf;
+ SOF_handler = false;
+ while (!SOF_handler);
+ if (available) {
+ available = false;
+ buf_stream_in = NULL;
+ return true;
+ }
+ return false;
+}
+
+bool USBAudio::readWrite(uint8_t * buf_read, uint8_t * buf_write) {
+ buf_stream_in = buf_read;
+ SOF_handler = false;
+ writeIN = false;
+ if (interruptIN) {
+ USBDevice::writeNB(EP3IN, buf_write, PACKET_SIZE_ISO_OUT, PACKET_SIZE_ISO_OUT);
+ } else {
+ buf_stream_out = buf_write;
+ }
+ while (!available);
+ if (interruptIN) {
+ while (!writeIN);
+ }
+ while (!SOF_handler);
+ return true;
+}
+
+
+bool USBAudio::write(uint8_t * buf) {
+ writeIN = false;
+ SOF_handler = false;
+ if (interruptIN) {
+ USBDevice::writeNB(EP3IN, buf, PACKET_SIZE_ISO_OUT, PACKET_SIZE_ISO_OUT);
+ } else {
+ buf_stream_out = buf;
+ }
+ while (!SOF_handler);
+ if (interruptIN) {
+ while (!writeIN);
+ }
+ return true;
+}
+
+
+float USBAudio::getVolume() {
+ return (mute) ? 0.0 : volume;
+}
+
+
+bool USBAudio::EP3_OUT_callback() {
+ uint32_t size = 0;
+ interruptOUT = true;
+ if (buf_stream_in != NULL) {
+ readEP(EP3OUT, (uint8_t *)buf_stream_in, &size, PACKET_SIZE_ISO_IN);
+ available = true;
+ buf_stream_in = NULL;
+ }
+ readStart(EP3OUT, PACKET_SIZE_ISO_IN);
+ return false;
+}
+
+
+bool USBAudio::EP3_IN_callback() {
+ interruptIN = true;
+ writeIN = true;
+ return true;
+}
+
+
+
+// Called in ISR context on each start of frame
+void USBAudio::SOF(int frameNumber) {
+ uint32_t size = 0;
+
+ if (!interruptOUT) {
+ // read the isochronous endpoint
+ if (buf_stream_in != NULL) {
+ if (USBDevice::readEP_NB(EP3OUT, (uint8_t *)buf_stream_in, &size, PACKET_SIZE_ISO_IN)) {
+ if (size) {
+ available = true;
+ readStart(EP3OUT, PACKET_SIZE_ISO_IN);
+ buf_stream_in = NULL;
+ }
+ }
+ }
+ }
+
+ if (!interruptIN) {
+ // write if needed
+ if (buf_stream_out != NULL) {
+ USBDevice::writeNB(EP3IN, (uint8_t *)buf_stream_out, PACKET_SIZE_ISO_OUT, PACKET_SIZE_ISO_OUT);
+ buf_stream_out = NULL;
+ }
+ }
+
+ SOF_handler = true;
+}
+
+
+// Called in ISR context
+// Set configuration. Return false if the configuration is not supported.
+bool USBAudio::USBCallback_setConfiguration(uint8_t configuration) {
+ if (configuration != DEFAULT_CONFIGURATION) {
+ return false;
+ }
+
+ // Configure isochronous endpoint
+ realiseEndpoint(EP3OUT, PACKET_SIZE_ISO_IN, ISOCHRONOUS);
+ realiseEndpoint(EP3IN, PACKET_SIZE_ISO_OUT, ISOCHRONOUS);
+
+ // activate readings on this endpoint
+ readStart(EP3OUT, PACKET_SIZE_ISO_IN);
+ return true;
+}
+
+
+// Called in ISR context
+// Set alternate setting. Return false if the alternate setting is not supported
+bool USBAudio::USBCallback_setInterface(uint16_t interface, uint8_t alternate) {
+ if (interface == 0 && alternate == 0) {
+ return true;
+ }
+ if (interface == 1 && (alternate == 0 || alternate == 1)) {
+ return true;
+ }
+ if (interface == 2 && (alternate == 0 || alternate == 1)) {
+ return true;
+ }
+ return false;
+}
+
+
+
+// Called in ISR context
+// Called by USBDevice on Endpoint0 request
+// This is used to handle extensions to standard requests and class specific requests.
+// Return true if class handles this request
+bool USBAudio::USBCallback_request() {
+ bool success = false;
+ CONTROL_TRANSFER * transfer = getTransferPtr();
+
+ // Process class-specific requests
+ if (transfer->setup.bmRequestType.Type == CLASS_TYPE) {
+
+ // Feature Unit: Interface = 0, ID = 2
+ if (transfer->setup.wIndex == 0x0200) {
+
+ // Master Channel
+ if ((transfer->setup.wValue & 0xff) == 0) {
+
+ switch (transfer->setup.wValue >> 8) {
+ case MUTE_CONTROL:
+ switch (transfer->setup.bRequest) {
+ case REQUEST_GET_CUR:
+ transfer->remaining = 1;
+ transfer->ptr = &mute;
+ transfer->direction = DEVICE_TO_HOST;
+ success = true;
+ break;
+
+ case REQUEST_SET_CUR:
+ transfer->remaining = 1;
+ transfer->notify = true;
+ transfer->direction = HOST_TO_DEVICE;
+ success = true;
+ break;
+ default:
+ break;
+ }
+ break;
+ case VOLUME_CONTROL:
+ switch (transfer->setup.bRequest) {
+ case REQUEST_GET_CUR:
+ transfer->remaining = 2;
+ transfer->ptr = (uint8_t *)&volCur;
+ transfer->direction = DEVICE_TO_HOST;
+ success = true;
+ break;
+ case REQUEST_GET_MIN:
+ transfer->remaining = 2;
+ transfer->ptr = (uint8_t *)&volMin;
+ transfer->direction = DEVICE_TO_HOST;
+ success = true;
+ break;
+ case REQUEST_GET_MAX:
+ transfer->remaining = 2;
+ transfer->ptr = (uint8_t *)&volMax;
+ transfer->direction = DEVICE_TO_HOST;
+ success = true;
+ break;
+ case REQUEST_GET_RES:
+ transfer->remaining = 2;
+ transfer->ptr = (uint8_t *)&volRes;
+ transfer->direction = DEVICE_TO_HOST;
+ success = true;
+ break;
+
+ case REQUEST_SET_CUR:
+ transfer->remaining = 2;
+ transfer->notify = true;
+ transfer->direction = HOST_TO_DEVICE;
+ success = true;
+ break;
+ case REQUEST_SET_MIN:
+ transfer->remaining = 2;
+ transfer->notify = true;
+ transfer->direction = HOST_TO_DEVICE;
+ success = true;
+ break;
+ case REQUEST_SET_MAX:
+ transfer->remaining = 2;
+ transfer->notify = true;
+ transfer->direction = HOST_TO_DEVICE;
+ success = true;
+ break;
+ case REQUEST_SET_RES:
+ transfer->remaining = 2;
+ transfer->notify = true;
+ transfer->direction = HOST_TO_DEVICE;
+ success = true;
+ break;
+ }
+ break;
+ default:
+ break;
+ }
+ }
+ }
+ }
+ return success;
+}
+
+
+// Called in ISR context when a data OUT stage has been performed
+void USBAudio::USBCallback_requestCompleted(uint8_t * buf, uint32_t length) {
+ if ((length == 1) || (length == 2)) {
+ uint16_t data = (length == 1) ? *buf : *((uint16_t *)buf);
+ CONTROL_TRANSFER * transfer = getTransferPtr();
+ switch (transfer->setup.wValue >> 8) {
+ case MUTE_CONTROL:
+ switch (transfer->setup.bRequest) {
+ case REQUEST_SET_CUR:
+ mute = data & 0xff;
+ updateVol.call();
+ break;
+ default:
+ break;
+ }
+ break;
+ case VOLUME_CONTROL:
+ switch (transfer->setup.bRequest) {
+ case REQUEST_SET_CUR:
+ volCur = data;
+ volume = (float)volCur/(float)volMax;
+ updateVol.call();
+ break;
+ default:
+ break;
+ }
+ break;
+ default:
+ break;
+ }
+ }
+}
+
+
+
+#define TOTAL_DESCRIPTOR_LENGTH ((1 * CONFIGURATION_DESCRIPTOR_LENGTH) \
+ + (5 * INTERFACE_DESCRIPTOR_LENGTH) \
+ + (1 * CONTROL_INTERFACE_DESCRIPTOR_LENGTH + 1) \
+ + (2 * INPUT_TERMINAL_DESCRIPTOR_LENGTH) \
+ + (1 * FEATURE_UNIT_DESCRIPTOR_LENGTH) \
+ + (2 * OUTPUT_TERMINAL_DESCRIPTOR_LENGTH) \
+ + (2 * STREAMING_INTERFACE_DESCRIPTOR_LENGTH) \
+ + (2 * FORMAT_TYPE_I_DESCRIPTOR_LENGTH) \
+ + (2 * (ENDPOINT_DESCRIPTOR_LENGTH + 2)) \
+ + (2 * STREAMING_ENDPOINT_DESCRIPTOR_LENGTH) )
+
+#define TOTAL_CONTROL_INTF_LENGTH (CONTROL_INTERFACE_DESCRIPTOR_LENGTH + 1 + \
+ 2*INPUT_TERMINAL_DESCRIPTOR_LENGTH + \
+ FEATURE_UNIT_DESCRIPTOR_LENGTH + \
+ 2*OUTPUT_TERMINAL_DESCRIPTOR_LENGTH)
+
+uint8_t * USBAudio::configurationDesc() {
+ static uint8_t configDescriptor[] = {
+ // Configuration 1
+ CONFIGURATION_DESCRIPTOR_LENGTH, // bLength
+ CONFIGURATION_DESCRIPTOR, // bDescriptorType
+ LSB(TOTAL_DESCRIPTOR_LENGTH), // wTotalLength (LSB)
+ MSB(TOTAL_DESCRIPTOR_LENGTH), // wTotalLength (MSB)
+ 0x03, // bNumInterfaces
+ DEFAULT_CONFIGURATION, // bConfigurationValue
+ 0x00, // iConfiguration
+ 0x80, // bmAttributes
+ 50, // bMaxPower
+
+ // Interface 0, Alternate Setting 0, Audio Control
+ INTERFACE_DESCRIPTOR_LENGTH, // bLength
+ INTERFACE_DESCRIPTOR, // bDescriptorType
+ 0x00, // bInterfaceNumber
+ 0x00, // bAlternateSetting
+ 0x00, // bNumEndpoints
+ AUDIO_CLASS, // bInterfaceClass
+ SUBCLASS_AUDIOCONTROL, // bInterfaceSubClass
+ 0x00, // bInterfaceProtocol
+ 0x00, // iInterface
+
+
+ // Audio Control Interface
+ CONTROL_INTERFACE_DESCRIPTOR_LENGTH + 1,// bLength
+ INTERFACE_DESCRIPTOR_TYPE, // bDescriptorType
+ CONTROL_HEADER, // bDescriptorSubtype
+ LSB(0x0100), // bcdADC (LSB)
+ MSB(0x0100), // bcdADC (MSB)
+ LSB(TOTAL_CONTROL_INTF_LENGTH), // wTotalLength
+ MSB(TOTAL_CONTROL_INTF_LENGTH), // wTotalLength
+ 0x02, // bInCollection
+ 0x01, // baInterfaceNr
+ 0x02, // baInterfaceNr
+
+ // Audio Input Terminal (Speaker)
+ INPUT_TERMINAL_DESCRIPTOR_LENGTH, // bLength
+ INTERFACE_DESCRIPTOR_TYPE, // bDescriptorType
+ CONTROL_INPUT_TERMINAL, // bDescriptorSubtype
+ 0x01, // bTerminalID
+ LSB(TERMINAL_USB_STREAMING), // wTerminalType
+ MSB(TERMINAL_USB_STREAMING), // wTerminalType
+ 0x00, // bAssocTerminal
+ channel_nb_in, // bNrChannels
+ (uint8_t)(LSB(channel_config_in)), // wChannelConfig
+ (uint8_t)(MSB(channel_config_in)), // wChannelConfig
+ 0x00, // iChannelNames
+ 0x00, // iTerminal
+
+ // Audio Feature Unit (Speaker)
+ FEATURE_UNIT_DESCRIPTOR_LENGTH, // bLength
+ INTERFACE_DESCRIPTOR_TYPE, // bDescriptorType
+ CONTROL_FEATURE_UNIT, // bDescriptorSubtype
+ 0x02, // bUnitID
+ 0x01, // bSourceID
+ 0x01, // bControlSize
+ CONTROL_MUTE |
+ CONTROL_VOLUME, // bmaControls(0)
+ 0x00, // bmaControls(1)
+ 0x00, // iTerminal
+
+ // Audio Output Terminal (Speaker)
+ OUTPUT_TERMINAL_DESCRIPTOR_LENGTH, // bLength
+ INTERFACE_DESCRIPTOR_TYPE, // bDescriptorType
+ CONTROL_OUTPUT_TERMINAL, // bDescriptorSubtype
+ 0x03, // bTerminalID
+ LSB(TERMINAL_SPEAKER), // wTerminalType
+ MSB(TERMINAL_SPEAKER), // wTerminalType
+ 0x00, // bAssocTerminal
+ 0x02, // bSourceID
+ 0x00, // iTerminal
+
+
+ // Audio Input Terminal (Microphone)
+ INPUT_TERMINAL_DESCRIPTOR_LENGTH, // bLength
+ INTERFACE_DESCRIPTOR_TYPE, // bDescriptorType
+ CONTROL_INPUT_TERMINAL, // bDescriptorSubtype
+ 0x04, // bTerminalID
+ LSB(TERMINAL_MICROPHONE), // wTerminalType
+ MSB(TERMINAL_MICROPHONE), // wTerminalType
+ 0x00, // bAssocTerminal
+ channel_nb_out, // bNrChannels
+ (uint8_t)(LSB(channel_config_out)), // wChannelConfig
+ (uint8_t)(MSB(channel_config_out)), // wChannelConfig
+ 0x00, // iChannelNames
+ 0x00, // iTerminal
+
+ // Audio Output Terminal (Microphone)
+ OUTPUT_TERMINAL_DESCRIPTOR_LENGTH, // bLength
+ INTERFACE_DESCRIPTOR_TYPE, // bDescriptorType
+ CONTROL_OUTPUT_TERMINAL, // bDescriptorSubtype
+ 0x05, // bTerminalID
+ LSB(TERMINAL_USB_STREAMING), // wTerminalType
+ MSB(TERMINAL_USB_STREAMING), // wTerminalType
+ 0x00, // bAssocTerminal
+ 0x04, // bSourceID
+ 0x00, // iTerminal
+
+
+
+
+
+
+ // Interface 1, Alternate Setting 0, Audio Streaming - Zero Bandwith
+ INTERFACE_DESCRIPTOR_LENGTH, // bLength
+ INTERFACE_DESCRIPTOR, // bDescriptorType
+ 0x01, // bInterfaceNumber
+ 0x00, // bAlternateSetting
+ 0x00, // bNumEndpoints
+ AUDIO_CLASS, // bInterfaceClass
+ SUBCLASS_AUDIOSTREAMING, // bInterfaceSubClass
+ 0x00, // bInterfaceProtocol
+ 0x00, // iInterface
+
+ // Interface 1, Alternate Setting 1, Audio Streaming - Operational
+ INTERFACE_DESCRIPTOR_LENGTH, // bLength
+ INTERFACE_DESCRIPTOR, // bDescriptorType
+ 0x01, // bInterfaceNumber
+ 0x01, // bAlternateSetting
+ 0x01, // bNumEndpoints
+ AUDIO_CLASS, // bInterfaceClass
+ SUBCLASS_AUDIOSTREAMING, // bInterfaceSubClass
+ 0x00, // bInterfaceProtocol
+ 0x00, // iInterface
+
+ // Audio Streaming Interface
+ STREAMING_INTERFACE_DESCRIPTOR_LENGTH, // bLength
+ INTERFACE_DESCRIPTOR_TYPE, // bDescriptorType
+ STREAMING_GENERAL, // bDescriptorSubtype
+ 0x01, // bTerminalLink
+ 0x00, // bDelay
+ LSB(FORMAT_PCM), // wFormatTag
+ MSB(FORMAT_PCM), // wFormatTag
+
+ // Audio Type I Format
+ FORMAT_TYPE_I_DESCRIPTOR_LENGTH, // bLength
+ INTERFACE_DESCRIPTOR_TYPE, // bDescriptorType
+ STREAMING_FORMAT_TYPE, // bDescriptorSubtype
+ FORMAT_TYPE_I, // bFormatType
+ channel_nb_in, // bNrChannels
+ 0x02, // bSubFrameSize
+ 16, // bBitResolution
+ 0x01, // bSamFreqType
+ (uint8_t)(LSB(FREQ_IN)), // tSamFreq
+ (uint8_t)((FREQ_IN >> 8) & 0xff), // tSamFreq
+ (uint8_t)((FREQ_IN >> 16) & 0xff), // tSamFreq
+
+ // Endpoint - Standard Descriptor
+ ENDPOINT_DESCRIPTOR_LENGTH + 2, // bLength
+ ENDPOINT_DESCRIPTOR, // bDescriptorType
+ PHY_TO_DESC(EPISO_OUT), // bEndpointAddress
+ E_ISOCHRONOUS, // bmAttributes
+ (uint8_t)(LSB(PACKET_SIZE_ISO_IN)), // wMaxPacketSize
+ (uint8_t)(MSB(PACKET_SIZE_ISO_IN)), // wMaxPacketSize
+ 0x01, // bInterval
+ 0x00, // bRefresh
+ 0x00, // bSynchAddress
+
+ // Endpoint - Audio Streaming
+ STREAMING_ENDPOINT_DESCRIPTOR_LENGTH, // bLength
+ ENDPOINT_DESCRIPTOR_TYPE, // bDescriptorType
+ ENDPOINT_GENERAL, // bDescriptor
+ 0x00, // bmAttributes
+ 0x00, // bLockDelayUnits
+ LSB(0x0000), // wLockDelay
+ MSB(0x0000), // wLockDelay
+
+
+
+
+
+
+
+ // Interface 1, Alternate Setting 0, Audio Streaming - Zero Bandwith
+ INTERFACE_DESCRIPTOR_LENGTH, // bLength
+ INTERFACE_DESCRIPTOR, // bDescriptorType
+ 0x02, // bInterfaceNumber
+ 0x00, // bAlternateSetting
+ 0x00, // bNumEndpoints
+ AUDIO_CLASS, // bInterfaceClass
+ SUBCLASS_AUDIOSTREAMING, // bInterfaceSubClass
+ 0x00, // bInterfaceProtocol
+ 0x00, // iInterface
+
+ // Interface 1, Alternate Setting 1, Audio Streaming - Operational
+ INTERFACE_DESCRIPTOR_LENGTH, // bLength
+ INTERFACE_DESCRIPTOR, // bDescriptorType
+ 0x02, // bInterfaceNumber
+ 0x01, // bAlternateSetting
+ 0x01, // bNumEndpoints
+ AUDIO_CLASS, // bInterfaceClass
+ SUBCLASS_AUDIOSTREAMING, // bInterfaceSubClass
+ 0x00, // bInterfaceProtocol
+ 0x00, // iInterface
+
+ // Audio Streaming Interface
+ STREAMING_INTERFACE_DESCRIPTOR_LENGTH, // bLength
+ INTERFACE_DESCRIPTOR_TYPE, // bDescriptorType
+ SUBCLASS_AUDIOCONTROL, // bDescriptorSubtype
+ 0x05, // bTerminalLink (output terminal microphone)
+ 0x01, // bDelay
+ 0x01, // wFormatTag
+ 0x00, // wFormatTag
+
+ // Audio Type I Format
+ FORMAT_TYPE_I_DESCRIPTOR_LENGTH, // bLength
+ INTERFACE_DESCRIPTOR_TYPE, // bDescriptorType
+ SUBCLASS_AUDIOSTREAMING, // bDescriptorSubtype
+ FORMAT_TYPE_I, // bFormatType
+ channel_nb_out, // bNrChannels
+ 0x02, // bSubFrameSize
+ 0x10, // bBitResolution
+ 0x01, // bSamFreqType
+ (uint8_t)(LSB(FREQ_OUT)), // tSamFreq
+ (uint8_t)((FREQ_OUT >> 8) & 0xff), // tSamFreq
+ (uint8_t)((FREQ_OUT >> 16) & 0xff), // tSamFreq
+
+ // Endpoint - Standard Descriptor
+ ENDPOINT_DESCRIPTOR_LENGTH + 2, // bLength
+ ENDPOINT_DESCRIPTOR, // bDescriptorType
+ PHY_TO_DESC(EPISO_IN), // bEndpointAddress
+ E_ISOCHRONOUS, // bmAttributes
+ (uint8_t)(LSB(PACKET_SIZE_ISO_OUT)), // wMaxPacketSize
+ (uint8_t)(MSB(PACKET_SIZE_ISO_OUT)), // wMaxPacketSize
+ 0x01, // bInterval
+ 0x00, // bRefresh
+ 0x00, // bSynchAddress
+
+ // Endpoint - Audio Streaming
+ STREAMING_ENDPOINT_DESCRIPTOR_LENGTH, // bLength
+ ENDPOINT_DESCRIPTOR_TYPE, // bDescriptorType
+ ENDPOINT_GENERAL, // bDescriptor
+ 0x00, // bmAttributes
+ 0x00, // bLockDelayUnits
+ LSB(0x0000), // wLockDelay
+ MSB(0x0000), // wLockDelay
+
+ // Terminator
+ 0 // bLength
+ };
+ return configDescriptor;
+}
+
+uint8_t * USBAudio::stringIinterfaceDesc() {
+ static uint8_t stringIinterfaceDescriptor[] = {
+ 0x0c, //bLength
+ STRING_DESCRIPTOR, //bDescriptorType 0x03
+ 'A',0,'u',0,'d',0,'i',0,'o',0 //bString iInterface - Audio
+ };
+ return stringIinterfaceDescriptor;
+}
+
+uint8_t * USBAudio::stringIproductDesc() {
+ static uint8_t stringIproductDescriptor[] = {
+ 0x16, //bLength
+ STRING_DESCRIPTOR, //bDescriptorType 0x03
+ 'M',0,'b',0,'e',0,'d',0,' ',0,'A',0,'u',0,'d',0,'i',0,'o',0 //bString iProduct - Mbed Audio
+ };
+ return stringIproductDescriptor;
+}
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/USBDevice/USBAudio/USBAudio.h Fri Aug 29 08:33:17 2014 +0000
@@ -0,0 +1,287 @@
+/* Copyright (c) 2010-2011 mbed.org, MIT License
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy of this software
+* and associated documentation files (the "Software"), to deal in the Software without
+* restriction, including without limitation the rights to use, copy, modify, merge, publish,
+* distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the
+* Software is furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in all copies or
+* substantial portions of the Software.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING
+* BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
+* DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+*/
+
+#ifndef USBAudio_H
+#define USBAudio_H
+
+/* These headers are included for child class. */
+#include "USBEndpoints.h"
+#include "USBDescriptor.h"
+#include "USBDevice_Types.h"
+
+#include "USBDevice.h"
+
+
+/**
+* USBAudio example
+*
+* @code
+* #include "mbed.h"
+* #include "USBAudio.h"
+*
+* Serial pc(USBTX, USBRX);
+*
+* // frequency: 48 kHz
+* #define FREQ 48000
+*
+* // 1 channel: mono
+* #define NB_CHA 1
+*
+* // length of an audio packet: each ms, we receive 48 * 16bits ->48 * 2 bytes. as there is one channel, the length will be 48 * 2 * 1
+* #define AUDIO_LENGTH_PACKET 48 * 2 * 1
+*
+* // USBAudio
+* USBAudio audio(FREQ, NB_CHA);
+*
+* int main() {
+* int16_t buf[AUDIO_LENGTH_PACKET/2];
+*
+* while (1) {
+* // read an audio packet
+* audio.read((uint8_t *)buf);
+*
+*
+* // print packet received
+* pc.printf("recv: ");
+* for(int i = 0; i < AUDIO_LENGTH_PACKET/2; i++) {
+* pc.printf("%d ", buf[i]);
+* }
+* pc.printf("\r\n");
+* }
+* }
+* @endcode
+*/
+class USBAudio: public USBDevice {
+public:
+
+ /**
+ * Constructor
+ *
+ * @param frequency_in frequency in Hz (default: 48000)
+ * @param channel_nb_in channel number (1 or 2) (default: 1)
+ * @param frequency_out frequency in Hz (default: 8000)
+ * @param channel_nb_out_in channel number (1 or 2) (default: 1)
+ * @param vendor_id Your vendor_id
+ * @param product_id Your product_id
+ * @param product_release Your preoduct_release
+ */
+ USBAudio(uint32_t frequency_in = 48000, uint8_t channel_nb_in = 1, uint32_t frequency_out = 8000, uint8_t channel_nb_out = 1, uint16_t vendor_id = 0x7bb8, uint16_t product_id = 0x1111, uint16_t product_release = 0x0100);
+
+ /**
+ * Get current volume between 0.0 and 1.0
+ *
+ * @returns volume
+ */
+ float getVolume();
+
+ /**
+ * Read an audio packet. During a frame, only a single reading (you can't write and read an audio packet during the same frame)can be done using this method. Warning: Blocking
+ *
+ * @param buf pointer on a buffer which will be filled with an audio packet
+ *
+ * @returns true if successfull
+ */
+ bool read(uint8_t * buf);
+
+ /**
+ * Try to read an audio packet. During a frame, only a single reading (you can't write and read an audio packet during the same frame)can be done using this method. Warning: Non Blocking
+ *
+ * @param buf pointer on a buffer which will be filled if an audio packet is available
+ *
+ * @returns true if successfull
+ */
+ bool readNB(uint8_t * buf);
+
+ /**
+ * Write an audio packet. During a frame, only a single writing (you can't write and read an audio packet during the same frame)can be done using this method.
+ *
+ * @param buf pointer on the audio packet which will be sent
+ * @returns true if successful
+ */
+ bool write(uint8_t * buf);
+
+ /**
+ * Write and read an audio packet at the same time (on the same frame)
+ *
+ * @param buf_read pointer on a buffer which will be filled with an audio packet
+ * @param buf_write pointer on the audio packet which will be sent
+ * @returns true if successful
+ */
+ bool readWrite(uint8_t * buf_read, uint8_t * buf_write);
+
+
+ /** attach a handler to update the volume
+ *
+ * @param function Function to attach
+ *
+ */
+ void attach(void(*fptr)(void)) {
+ updateVol.attach(fptr);
+ }
+
+ /** Attach a nonstatic void/void member function to update the volume
+ *
+ * @param tptr Object pointer
+ * @param mptr Member function pointer
+ *
+ */
+ template<typename T>
+ void attach(T *tptr, void(T::*mptr)(void)) {
+ updateVol.attach(tptr, mptr);
+ }
+
+
+protected:
+
+ /*
+ * Called by USBDevice layer. Set configuration of the device.
+ * For instance, you can add all endpoints that you need on this function.
+ *
+ * @param configuration Number of the configuration
+ * @returns true if class handles this request
+ */
+ virtual bool USBCallback_setConfiguration(uint8_t configuration);
+
+ /*
+ * Called by USBDevice on Endpoint0 request. Warning: Called in ISR context
+ * This is used to handle extensions to standard requests
+ * and class specific requests
+ *
+ * @returns true if class handles this request
+ */
+ virtual bool USBCallback_request();
+
+ /*
+ * Get string product descriptor
+ *
+ * @returns pointer to the string product descriptor
+ */
+ virtual uint8_t * stringIproductDesc();
+
+ /*
+ * Get string interface descriptor
+ *
+ * @returns pointer to the string interface descriptor
+ */
+ virtual uint8_t * stringIinterfaceDesc();
+
+ /*
+ * Get configuration descriptor
+ *
+ * @returns pointer to the configuration descriptor
+ */
+ virtual uint8_t * configurationDesc();
+
+ /*
+ * Called by USBDevice layer. Set interface/alternate of the device.
+ *
+ * @param interface Number of the interface to be configured
+ * @param alternate Number of the alternate to be configured
+ * @returns true if class handles this request
+ */
+ virtual bool USBCallback_setInterface(uint16_t interface, uint8_t alternate);
+
+ /*
+ * Called by USBDevice on Endpoint0 request completion
+ * if the 'notify' flag has been set to true. Warning: Called in ISR context
+ *
+ * In this case it is used to indicate that a HID report has
+ * been received from the host on endpoint 0
+ *
+ * @param buf buffer received on endpoint 0
+ * @param length length of this buffer
+ */
+ virtual void USBCallback_requestCompleted(uint8_t * buf, uint32_t length);
+
+ /*
+ * Callback called on each Start of Frame event
+ */
+ virtual void SOF(int frameNumber);
+
+ /*
+ * Callback called when a packet is received
+ */
+ virtual bool EP3_OUT_callback();
+
+ /*
+ * Callback called when a packet has been sent
+ */
+ virtual bool EP3_IN_callback();
+
+private:
+
+ // stream available ?
+ volatile bool available;
+
+ // interrupt OUT has been received
+ volatile bool interruptOUT;
+
+ // interrupt IN has been received
+ volatile bool interruptIN;
+
+ // audio packet has been written
+ volatile bool writeIN;
+
+ // FREQ
+ uint32_t FREQ_OUT;
+ uint32_t FREQ_IN;
+
+ // size of the maximum packet for the isochronous endpoint
+ uint32_t PACKET_SIZE_ISO_IN;
+ uint32_t PACKET_SIZE_ISO_OUT;
+
+ // mono, stereo,...
+ uint8_t channel_nb_in;
+ uint8_t channel_nb_out;
+
+ // channel config: master, left, right
+ uint8_t channel_config_in;
+ uint8_t channel_config_out;
+
+ // mute state
+ uint8_t mute;
+
+ // Volume Current Value
+ uint16_t volCur;
+
+ // Volume Minimum Value
+ uint16_t volMin;
+
+ // Volume Maximum Value
+ uint16_t volMax;
+
+ // Volume Resolution
+ uint16_t volRes;
+
+ // Buffer containing one audio packet (to be read)
+ volatile uint8_t * buf_stream_in;
+
+ // Buffer containing one audio packet (to be written)
+ volatile uint8_t * buf_stream_out;
+
+ // callback to update volume
+ FunctionPointer updateVol;
+
+ // boolean showing that the SOF handler has been called. Useful for readNB.
+ volatile bool SOF_handler;
+
+ volatile float volume;
+
+};
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/USBDevice/USBAudio/USBAudio_Types.h Fri Aug 29 08:33:17 2014 +0000 @@ -0,0 +1,97 @@ +/* Copyright (c) 2010-2011 mbed.org, MIT License +* +* Permission is hereby granted, free of charge, to any person obtaining a copy of this software +* and associated documentation files (the "Software"), to deal in the Software without +* restriction, including without limitation the rights to use, copy, modify, merge, publish, +* distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the +* Software is furnished to do so, subject to the following conditions: +* +* The above copyright notice and this permission notice shall be included in all copies or +* substantial portions of the Software. +* +* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING +* BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND +* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, +* DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, +* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. +*/ + +#ifndef USBAUDIO_TYPES_H +#define USBAUDIO_TYPES_H + + +#define DEFAULT_CONFIGURATION (1) + +// Audio Request Codes +#define REQUEST_SET_CUR 0x01 +#define REQUEST_GET_CUR 0x81 +#define REQUEST_SET_MIN 0x02 +#define REQUEST_GET_MIN 0x82 +#define REQUEST_SET_MAX 0x03 +#define REQUEST_GET_MAX 0x83 +#define REQUEST_SET_RES 0x04 +#define REQUEST_GET_RES 0x84 + +#define MUTE_CONTROL 0x01 +#define VOLUME_CONTROL 0x02 + + +// Audio Descriptor Sizes +#define CONTROL_INTERFACE_DESCRIPTOR_LENGTH 0x09 +#define STREAMING_INTERFACE_DESCRIPTOR_LENGTH 0x07 +#define INPUT_TERMINAL_DESCRIPTOR_LENGTH 0x0C +#define OUTPUT_TERMINAL_DESCRIPTOR_LENGTH 0x09 +#define FEATURE_UNIT_DESCRIPTOR_LENGTH 0x09 +#define STREAMING_ENDPOINT_DESCRIPTOR_LENGTH 0x07 + +// Audio Format Type Descriptor Sizes +#define FORMAT_TYPE_I_DESCRIPTOR_LENGTH 0x0b + +#define AUDIO_CLASS 0x01 +#define SUBCLASS_AUDIOCONTROL 0x01 +#define SUBCLASS_AUDIOSTREAMING 0x02 + +// Audio Descriptor Types +#define INTERFACE_DESCRIPTOR_TYPE 0x24 +#define ENDPOINT_DESCRIPTOR_TYPE 0x25 + +// Audio Control Interface Descriptor Subtypes +#define CONTROL_HEADER 0x01 +#define CONTROL_INPUT_TERMINAL 0x02 +#define CONTROL_OUTPUT_TERMINAL 0x03 +#define CONTROL_FEATURE_UNIT 0x06 + +// USB Terminal Types +#define TERMINAL_USB_STREAMING 0x0101 + +// Predefined Audio Channel Configuration Bits +// Mono +#define CHANNEL_M 0x0000 +#define CHANNEL_L 0x0001 /* Left Front */ +#define CHANNEL_R 0x0002 /* Right Front */ + +// Feature Unit Control Bits +#define CONTROL_MUTE 0x0001 +#define CONTROL_VOLUME 0x0002 + +// Input Terminal Types +#define TERMINAL_MICROPHONE 0x0201 + +// Output Terminal Types +#define TERMINAL_SPEAKER 0x0301 +#define TERMINAL_HEADPHONES 0x0302 + +// Audio Streaming Interface Descriptor Subtypes +#define STREAMING_GENERAL 0x01 +#define STREAMING_FORMAT_TYPE 0x02 + +// Audio Data Format Type I Codes +#define FORMAT_PCM 0x0001 + +// Audio Format Types +#define FORMAT_TYPE_I 0x01 + +// Audio Endpoint Descriptor Subtypes +#define ENDPOINT_GENERAL 0x01 + +#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/USBDevice/USBDevice/USBDescriptor.h Fri Aug 29 08:33:17 2014 +0000 @@ -0,0 +1,74 @@ +/* Copyright (c) 2010-2011 mbed.org, MIT License +* +* Permission is hereby granted, free of charge, to any person obtaining a copy of this software +* and associated documentation files (the "Software"), to deal in the Software without +* restriction, including without limitation the rights to use, copy, modify, merge, publish, +* distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the +* Software is furnished to do so, subject to the following conditions: +* +* The above copyright notice and this permission notice shall be included in all copies or +* substantial portions of the Software. +* +* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING +* BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND +* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, +* DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, +* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. +*/ + +/* Standard descriptor types */ +#define DEVICE_DESCRIPTOR (1) +#define CONFIGURATION_DESCRIPTOR (2) +#define STRING_DESCRIPTOR (3) +#define INTERFACE_DESCRIPTOR (4) +#define ENDPOINT_DESCRIPTOR (5) +#define QUALIFIER_DESCRIPTOR (6) + +/* Standard descriptor lengths */ +#define DEVICE_DESCRIPTOR_LENGTH (0x12) +#define CONFIGURATION_DESCRIPTOR_LENGTH (0x09) +#define INTERFACE_DESCRIPTOR_LENGTH (0x09) +#define ENDPOINT_DESCRIPTOR_LENGTH (0x07) + + +/*string offset*/ +#define STRING_OFFSET_LANGID (0) +#define STRING_OFFSET_IMANUFACTURER (1) +#define STRING_OFFSET_IPRODUCT (2) +#define STRING_OFFSET_ISERIAL (3) +#define STRING_OFFSET_ICONFIGURATION (4) +#define STRING_OFFSET_IINTERFACE (5) + +/* USB Specification Release Number */ +#define USB_VERSION_2_0 (0x0200) + +/* Least/Most significant byte of short integer */ +#define LSB(n) ((n)&0xff) +#define MSB(n) (((n)&0xff00)>>8) + +/* Convert physical endpoint number to descriptor endpoint number */ +#define PHY_TO_DESC(endpoint) (((endpoint)>>1) | (((endpoint) & 1) ? 0x80:0)) + +/* bmAttributes in configuration descriptor */ +/* C_RESERVED must always be set */ +#define C_RESERVED (1U<<7) +#define C_SELF_POWERED (1U<<6) +#define C_REMOTE_WAKEUP (1U<<5) + +/* bMaxPower in configuration descriptor */ +#define C_POWER(mA) ((mA)/2) + +/* bmAttributes in endpoint descriptor */ +#define E_CONTROL (0x00) +#define E_ISOCHRONOUS (0x01) +#define E_BULK (0x02) +#define E_INTERRUPT (0x03) + +/* For isochronous endpoints only: */ +#define E_NO_SYNCHRONIZATION (0x00) +#define E_ASYNCHRONOUS (0x04) +#define E_ADAPTIVE (0x08) +#define E_SYNCHRONOUS (0x0C) +#define E_DATA (0x00) +#define E_FEEDBACK (0x10) +#define E_IMPLICIT_FEEDBACK (0x20)
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/USBDevice/USBDevice/USBDevice.cpp Fri Aug 29 08:33:17 2014 +0000
@@ -0,0 +1,980 @@
+/* Copyright (c) 2010-2011 mbed.org, MIT License
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy of this software
+* and associated documentation files (the "Software"), to deal in the Software without
+* restriction, including without limitation the rights to use, copy, modify, merge, publish,
+* distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the
+* Software is furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in all copies or
+* substantial portions of the Software.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING
+* BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
+* DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+*/
+
+#include "stdint.h"
+
+#include "USBEndpoints.h"
+#include "USBDevice.h"
+#include "USBDescriptor.h"
+
+//#define DEBUG
+
+/* Device status */
+#define DEVICE_STATUS_SELF_POWERED (1U<<0)
+#define DEVICE_STATUS_REMOTE_WAKEUP (1U<<1)
+
+/* Endpoint status */
+#define ENDPOINT_STATUS_HALT (1U<<0)
+
+/* Standard feature selectors */
+#define DEVICE_REMOTE_WAKEUP (1)
+#define ENDPOINT_HALT (0)
+
+/* Macro to convert wIndex endpoint number to physical endpoint number */
+#define WINDEX_TO_PHYSICAL(endpoint) (((endpoint & 0x0f) << 1) + \
+ ((endpoint & 0x80) ? 1 : 0))
+
+
+bool USBDevice::requestGetDescriptor(void)
+{
+ bool success = false;
+#ifdef DEBUG
+ printf("get descr: type: %d\r\n", DESCRIPTOR_TYPE(transfer.setup.wValue));
+#endif
+ switch (DESCRIPTOR_TYPE(transfer.setup.wValue))
+ {
+ case DEVICE_DESCRIPTOR:
+ if (deviceDesc() != NULL)
+ {
+ if ((deviceDesc()[0] == DEVICE_DESCRIPTOR_LENGTH) \
+ && (deviceDesc()[1] == DEVICE_DESCRIPTOR))
+ {
+#ifdef DEBUG
+ printf("device descr\r\n");
+#endif
+ transfer.remaining = DEVICE_DESCRIPTOR_LENGTH;
+ transfer.ptr = deviceDesc();
+ transfer.direction = DEVICE_TO_HOST;
+ success = true;
+ }
+ }
+ break;
+ case CONFIGURATION_DESCRIPTOR:
+ if (configurationDesc() != NULL)
+ {
+ if ((configurationDesc()[0] == CONFIGURATION_DESCRIPTOR_LENGTH) \
+ && (configurationDesc()[1] == CONFIGURATION_DESCRIPTOR))
+ {
+#ifdef DEBUG
+ printf("conf descr request\r\n");
+#endif
+ /* Get wTotalLength */
+ transfer.remaining = configurationDesc()[2] \
+ | (configurationDesc()[3] << 8);
+
+ transfer.ptr = configurationDesc();
+ transfer.direction = DEVICE_TO_HOST;
+ success = true;
+ }
+ }
+ break;
+ case STRING_DESCRIPTOR:
+#ifdef DEBUG
+ printf("str descriptor\r\n");
+#endif
+ switch (DESCRIPTOR_INDEX(transfer.setup.wValue))
+ {
+ case STRING_OFFSET_LANGID:
+#ifdef DEBUG
+ printf("1\r\n");
+#endif
+ transfer.remaining = stringLangidDesc()[0];
+ transfer.ptr = stringLangidDesc();
+ transfer.direction = DEVICE_TO_HOST;
+ success = true;
+ break;
+ case STRING_OFFSET_IMANUFACTURER:
+#ifdef DEBUG
+ printf("2\r\n");
+#endif
+ transfer.remaining = stringImanufacturerDesc()[0];
+ transfer.ptr = stringImanufacturerDesc();
+ transfer.direction = DEVICE_TO_HOST;
+ success = true;
+ break;
+ case STRING_OFFSET_IPRODUCT:
+#ifdef DEBUG
+ printf("3\r\n");
+#endif
+ transfer.remaining = stringIproductDesc()[0];
+ transfer.ptr = stringIproductDesc();
+ transfer.direction = DEVICE_TO_HOST;
+ success = true;
+ break;
+ case STRING_OFFSET_ISERIAL:
+#ifdef DEBUG
+ printf("4\r\n");
+#endif
+ transfer.remaining = stringIserialDesc()[0];
+ transfer.ptr = stringIserialDesc();
+ transfer.direction = DEVICE_TO_HOST;
+ success = true;
+ break;
+ case STRING_OFFSET_ICONFIGURATION:
+#ifdef DEBUG
+ printf("5\r\n");
+#endif
+ transfer.remaining = stringIConfigurationDesc()[0];
+ transfer.ptr = stringIConfigurationDesc();
+ transfer.direction = DEVICE_TO_HOST;
+ success = true;
+ break;
+ case STRING_OFFSET_IINTERFACE:
+#ifdef DEBUG
+ printf("6\r\n");
+#endif
+ transfer.remaining = stringIinterfaceDesc()[0];
+ transfer.ptr = stringIinterfaceDesc();
+ transfer.direction = DEVICE_TO_HOST;
+ success = true;
+ break;
+ }
+ break;
+ case INTERFACE_DESCRIPTOR:
+#ifdef DEBUG
+ printf("interface descr\r\n");
+#endif
+ case ENDPOINT_DESCRIPTOR:
+#ifdef DEBUG
+ printf("endpoint descr\r\n");
+#endif
+ /* TODO: Support is optional, not implemented here */
+ break;
+ default:
+#ifdef DEBUG
+ printf("ERROR\r\n");
+#endif
+ break;
+ }
+
+ return success;
+}
+
+void USBDevice::decodeSetupPacket(uint8_t *data, SETUP_PACKET *packet)
+{
+ /* Fill in the elements of a SETUP_PACKET structure from raw data */
+ packet->bmRequestType.dataTransferDirection = (data[0] & 0x80) >> 7;
+ packet->bmRequestType.Type = (data[0] & 0x60) >> 5;
+ packet->bmRequestType.Recipient = data[0] & 0x1f;
+ packet->bRequest = data[1];
+ packet->wValue = (data[2] | (uint16_t)data[3] << 8);
+ packet->wIndex = (data[4] | (uint16_t)data[5] << 8);
+ packet->wLength = (data[6] | (uint16_t)data[7] << 8);
+}
+
+
+bool USBDevice::controlOut(void)
+{
+ /* Control transfer data OUT stage */
+ uint8_t buffer[MAX_PACKET_SIZE_EP0];
+ uint32_t packetSize;
+
+ /* Check we should be transferring data OUT */
+ if (transfer.direction != HOST_TO_DEVICE)
+ {
+ return false;
+ }
+
+ /* Read from endpoint */
+ packetSize = EP0getReadResult(buffer);
+
+ /* Check if transfer size is valid */
+ if (packetSize > transfer.remaining)
+ {
+ /* Too big */
+ return false;
+ }
+
+ /* Update transfer */
+ transfer.ptr += packetSize;
+ transfer.remaining -= packetSize;
+
+ /* Check if transfer has completed */
+ if (transfer.remaining == 0)
+ {
+ /* Transfer completed */
+ if (transfer.notify)
+ {
+ /* Notify class layer. */
+ USBCallback_requestCompleted(buffer, packetSize);
+ transfer.notify = false;
+ }
+ /* Status stage */
+ EP0write(NULL, 0);
+ }
+ else
+ {
+ EP0read();
+ }
+
+ return true;
+}
+
+bool USBDevice::controlIn(void)
+{
+ /* Control transfer data IN stage */
+ uint32_t packetSize;
+
+ /* Check if transfer has completed (status stage transactions */
+ /* also have transfer.remaining == 0) */
+ if (transfer.remaining == 0)
+ {
+ if (transfer.zlp)
+ {
+ /* Send zero length packet */
+ EP0write(NULL, 0);
+ transfer.zlp = false;
+ }
+
+ /* Transfer completed */
+ if (transfer.notify)
+ {
+ /* Notify class layer. */
+ USBCallback_requestCompleted(NULL, 0);
+ transfer.notify = false;
+ }
+
+ EP0read();
+ EP0readStage();
+
+ /* Completed */
+ return true;
+ }
+
+ /* Check we should be transferring data IN */
+ if (transfer.direction != DEVICE_TO_HOST)
+ {
+ return false;
+ }
+
+ packetSize = transfer.remaining;
+
+ if (packetSize > MAX_PACKET_SIZE_EP0)
+ {
+ packetSize = MAX_PACKET_SIZE_EP0;
+ }
+
+ /* Write to endpoint */
+ EP0write(transfer.ptr, packetSize);
+
+ /* Update transfer */
+ transfer.ptr += packetSize;
+ transfer.remaining -= packetSize;
+
+ return true;
+}
+
+bool USBDevice::requestSetAddress(void)
+{
+ /* Set the device address */
+ setAddress(transfer.setup.wValue);
+
+ if (transfer.setup.wValue == 0)
+ {
+ device.state = DEFAULT;
+ }
+ else
+ {
+ device.state = ADDRESS;
+ }
+
+ return true;
+}
+
+bool USBDevice::requestSetConfiguration(void)
+{
+
+ device.configuration = transfer.setup.wValue;
+ /* Set the device configuration */
+ if (device.configuration == 0)
+ {
+ /* Not configured */
+ unconfigureDevice();
+ device.state = ADDRESS;
+ }
+ else
+ {
+ if (USBCallback_setConfiguration(device.configuration))
+ {
+ /* Valid configuration */
+ configureDevice();
+ device.state = CONFIGURED;
+ }
+ else
+ {
+ return false;
+ }
+ }
+
+ return true;
+}
+
+bool USBDevice::requestGetConfiguration(void)
+{
+ /* Send the device configuration */
+ transfer.ptr = &device.configuration;
+ transfer.remaining = sizeof(device.configuration);
+ transfer.direction = DEVICE_TO_HOST;
+ return true;
+}
+
+bool USBDevice::requestGetInterface(void)
+{
+ /* Return the selected alternate setting for an interface */
+
+ if (device.state != CONFIGURED)
+ {
+ return false;
+ }
+
+ /* Send the alternate setting */
+ transfer.setup.wIndex = currentInterface;
+ transfer.ptr = ¤tAlternate;
+ transfer.remaining = sizeof(currentAlternate);
+ transfer.direction = DEVICE_TO_HOST;
+ return true;
+}
+
+bool USBDevice::requestSetInterface(void)
+{
+ bool success = false;
+ if(USBCallback_setInterface(transfer.setup.wIndex, transfer.setup.wValue))
+ {
+ success = true;
+ currentInterface = transfer.setup.wIndex;
+ currentAlternate = transfer.setup.wValue;
+ }
+ return success;
+}
+
+bool USBDevice::requestSetFeature()
+{
+ bool success = false;
+
+ if (device.state != CONFIGURED)
+ {
+ /* Endpoint or interface must be zero */
+ if (transfer.setup.wIndex != 0)
+ {
+ return false;
+ }
+ }
+
+ switch (transfer.setup.bmRequestType.Recipient)
+ {
+ case DEVICE_RECIPIENT:
+ /* TODO: Remote wakeup feature not supported */
+ break;
+ case ENDPOINT_RECIPIENT:
+ if (transfer.setup.wValue == ENDPOINT_HALT)
+ {
+ /* TODO: We should check that the endpoint number is valid */
+ stallEndpoint(
+ WINDEX_TO_PHYSICAL(transfer.setup.wIndex));
+ success = true;
+ }
+ break;
+ default:
+ break;
+ }
+
+ return success;
+}
+
+bool USBDevice::requestClearFeature()
+{
+ bool success = false;
+
+ if (device.state != CONFIGURED)
+ {
+ /* Endpoint or interface must be zero */
+ if (transfer.setup.wIndex != 0)
+ {
+ return false;
+ }
+ }
+
+ switch (transfer.setup.bmRequestType.Recipient)
+ {
+ case DEVICE_RECIPIENT:
+ /* TODO: Remote wakeup feature not supported */
+ break;
+ case ENDPOINT_RECIPIENT:
+ /* TODO: We should check that the endpoint number is valid */
+ if (transfer.setup.wValue == ENDPOINT_HALT)
+ {
+ unstallEndpoint( WINDEX_TO_PHYSICAL(transfer.setup.wIndex));
+ success = true;
+ }
+ break;
+ default:
+ break;
+ }
+
+ return success;
+}
+
+bool USBDevice::requestGetStatus(void)
+{
+ static uint16_t status;
+ bool success = false;
+
+ if (device.state != CONFIGURED)
+ {
+ /* Endpoint or interface must be zero */
+ if (transfer.setup.wIndex != 0)
+ {
+ return false;
+ }
+ }
+
+ switch (transfer.setup.bmRequestType.Recipient)
+ {
+ case DEVICE_RECIPIENT:
+ /* TODO: Currently only supports self powered devices */
+ status = DEVICE_STATUS_SELF_POWERED;
+ success = true;
+ break;
+ case INTERFACE_RECIPIENT:
+ status = 0;
+ success = true;
+ break;
+ case ENDPOINT_RECIPIENT:
+ /* TODO: We should check that the endpoint number is valid */
+ if (getEndpointStallState(
+ WINDEX_TO_PHYSICAL(transfer.setup.wIndex)))
+ {
+ status = ENDPOINT_STATUS_HALT;
+ }
+ else
+ {
+ status = 0;
+ }
+ success = true;
+ break;
+ default:
+ break;
+ }
+
+ if (success)
+ {
+ /* Send the status */
+ transfer.ptr = (uint8_t *)&status; /* Assumes little endian */
+ transfer.remaining = sizeof(status);
+ transfer.direction = DEVICE_TO_HOST;
+ }
+
+ return success;
+}
+
+bool USBDevice::requestSetup(void)
+{
+ bool success = false;
+
+ /* Process standard requests */
+ if ((transfer.setup.bmRequestType.Type == STANDARD_TYPE))
+ {
+ switch (transfer.setup.bRequest)
+ {
+ case GET_STATUS:
+ success = requestGetStatus();
+ break;
+ case CLEAR_FEATURE:
+ success = requestClearFeature();
+ break;
+ case SET_FEATURE:
+ success = requestSetFeature();
+ break;
+ case SET_ADDRESS:
+ success = requestSetAddress();
+ break;
+ case GET_DESCRIPTOR:
+ success = requestGetDescriptor();
+ break;
+ case SET_DESCRIPTOR:
+ /* TODO: Support is optional, not implemented here */
+ success = false;
+ break;
+ case GET_CONFIGURATION:
+ success = requestGetConfiguration();
+ break;
+ case SET_CONFIGURATION:
+ success = requestSetConfiguration();
+ break;
+ case GET_INTERFACE:
+ success = requestGetInterface();
+ break;
+ case SET_INTERFACE:
+ success = requestSetInterface();
+ break;
+ default:
+ break;
+ }
+ }
+
+ return success;
+}
+
+bool USBDevice::controlSetup(void)
+{
+ bool success = false;
+
+ /* Control transfer setup stage */
+ uint8_t buffer[MAX_PACKET_SIZE_EP0];
+
+ EP0setup(buffer);
+
+ /* Initialise control transfer state */
+ decodeSetupPacket(buffer, &transfer.setup);
+ transfer.ptr = NULL;
+ transfer.remaining = 0;
+ transfer.direction = 0;
+ transfer.zlp = false;
+ transfer.notify = false;
+
+#ifdef DEBUG
+ printf("dataTransferDirection: %d\r\nType: %d\r\nRecipient: %d\r\nbRequest: %d\r\nwValue: %d\r\nwIndex: %d\r\nwLength: %d\r\n",transfer.setup.bmRequestType.dataTransferDirection,
+ transfer.setup.bmRequestType.Type,
+ transfer.setup.bmRequestType.Recipient,
+ transfer.setup.bRequest,
+ transfer.setup.wValue,
+ transfer.setup.wIndex,
+ transfer.setup.wLength);
+#endif
+
+ /* Class / vendor specific */
+ success = USBCallback_request();
+
+ if (!success)
+ {
+ /* Standard requests */
+ if (!requestSetup())
+ {
+#ifdef DEBUG
+ printf("fail!!!!\r\n");
+#endif
+ return false;
+ }
+ }
+
+ /* Check transfer size and direction */
+ if (transfer.setup.wLength>0)
+ {
+ if (transfer.setup.bmRequestType.dataTransferDirection \
+ == DEVICE_TO_HOST)
+ {
+ /* IN data stage is required */
+ if (transfer.direction != DEVICE_TO_HOST)
+ {
+ return false;
+ }
+
+ /* Transfer must be less than or equal to the size */
+ /* requested by the host */
+ if (transfer.remaining > transfer.setup.wLength)
+ {
+ transfer.remaining = transfer.setup.wLength;
+ }
+ }
+ else
+ {
+
+ /* OUT data stage is required */
+ if (transfer.direction != HOST_TO_DEVICE)
+ {
+ return false;
+ }
+
+ /* Transfer must be equal to the size requested by the host */
+ if (transfer.remaining != transfer.setup.wLength)
+ {
+ return false;
+ }
+ }
+ }
+ else
+ {
+ /* No data stage; transfer size must be zero */
+ if (transfer.remaining != 0)
+ {
+ return false;
+ }
+ }
+
+ /* Data or status stage if applicable */
+ if (transfer.setup.wLength>0)
+ {
+ if (transfer.setup.bmRequestType.dataTransferDirection \
+ == DEVICE_TO_HOST)
+ {
+ /* Check if we'll need to send a zero length packet at */
+ /* the end of this transfer */
+ if (transfer.setup.wLength > transfer.remaining)
+ {
+ /* Device wishes to transfer less than host requested */
+ if ((transfer.remaining % MAX_PACKET_SIZE_EP0) == 0)
+ {
+ /* Transfer is a multiple of EP0 max packet size */
+ transfer.zlp = true;
+ }
+ }
+
+ /* IN stage */
+ controlIn();
+ }
+ else
+ {
+ /* OUT stage */
+ EP0read();
+ }
+ }
+ else
+ {
+ /* Status stage */
+ EP0write(NULL, 0);
+ }
+
+ return true;
+}
+
+void USBDevice::busReset(void)
+{
+ device.state = DEFAULT;
+ device.configuration = 0;
+ device.suspended = false;
+
+ /* Call class / vendor specific busReset function */
+ USBCallback_busReset();
+}
+
+void USBDevice::EP0setupCallback(void)
+{
+ /* Endpoint 0 setup event */
+ if (!controlSetup())
+ {
+ /* Protocol stall */
+ EP0stall();
+ }
+
+ /* Return true if an OUT data stage is expected */
+}
+
+void USBDevice::EP0out(void)
+{
+ /* Endpoint 0 OUT data event */
+ if (!controlOut())
+ {
+ /* Protocol stall; this will stall both endpoints */
+ EP0stall();
+ }
+}
+
+void USBDevice::EP0in(void)
+{
+#ifdef DEBUG
+ printf("EP0IN\r\n");
+#endif
+ /* Endpoint 0 IN data event */
+ if (!controlIn())
+ {
+ /* Protocol stall; this will stall both endpoints */
+ EP0stall();
+ }
+}
+
+bool USBDevice::configured(void)
+{
+ /* Returns true if device is in the CONFIGURED state */
+ return (device.state == CONFIGURED);
+}
+
+void USBDevice::connect(bool blocking)
+{
+ /* Connect device */
+ USBHAL::connect();
+
+ if (blocking) {
+ /* Block if not configured */
+ while (!configured());
+ }
+}
+
+void USBDevice::disconnect(void)
+{
+ /* Disconnect device */
+ USBHAL::disconnect();
+}
+
+CONTROL_TRANSFER * USBDevice::getTransferPtr(void)
+{
+ return &transfer;
+}
+
+bool USBDevice::addEndpoint(uint8_t endpoint, uint32_t maxPacket)
+{
+ return realiseEndpoint(endpoint, maxPacket, 0);
+}
+
+bool USBDevice::addRateFeedbackEndpoint(uint8_t endpoint, uint32_t maxPacket)
+{
+ /* For interrupt endpoints only */
+ return realiseEndpoint(endpoint, maxPacket, RATE_FEEDBACK_MODE);
+}
+
+uint8_t * USBDevice::findDescriptor(uint8_t descriptorType)
+{
+ /* Find a descriptor within the list of descriptors */
+ /* following a configuration descriptor. */
+ uint16_t wTotalLength;
+ uint8_t *ptr;
+
+ if (configurationDesc() == NULL)
+ {
+ return NULL;
+ }
+
+ /* Check this is a configuration descriptor */
+ if ((configurationDesc()[0] != CONFIGURATION_DESCRIPTOR_LENGTH) \
+ || (configurationDesc()[1] != CONFIGURATION_DESCRIPTOR))
+ {
+ return NULL;
+ }
+
+ wTotalLength = configurationDesc()[2] | (configurationDesc()[3] << 8);
+
+ /* Check there are some more descriptors to follow */
+ if (wTotalLength <= (CONFIGURATION_DESCRIPTOR_LENGTH+2))
+ /* +2 is for bLength and bDescriptorType of next descriptor */
+ {
+ return NULL;
+ }
+
+ /* Start at first descriptor after the configuration descriptor */
+ ptr = &(configurationDesc()[CONFIGURATION_DESCRIPTOR_LENGTH]);
+
+ do {
+ if (ptr[1] /* bDescriptorType */ == descriptorType)
+ {
+ /* Found */
+ return ptr;
+ }
+
+ /* Skip to next descriptor */
+ ptr += ptr[0]; /* bLength */
+ } while (ptr < (configurationDesc() + wTotalLength));
+
+ /* Reached end of the descriptors - not found */
+ return NULL;
+}
+
+
+void USBDevice::connectStateChanged(unsigned int connected)
+{
+}
+
+void USBDevice::suspendStateChanged(unsigned int suspended)
+{
+}
+
+
+USBDevice::USBDevice(uint16_t vendor_id, uint16_t product_id, uint16_t product_release){
+ VENDOR_ID = vendor_id;
+ PRODUCT_ID = product_id;
+ PRODUCT_RELEASE = product_release;
+
+ /* Set initial device state */
+ device.state = POWERED;
+ device.configuration = 0;
+ device.suspended = false;
+};
+
+
+bool USBDevice::readStart(uint8_t endpoint, uint32_t maxSize)
+{
+ return endpointRead(endpoint, maxSize) == EP_PENDING;
+}
+
+
+bool USBDevice::write(uint8_t endpoint, uint8_t * buffer, uint32_t size, uint32_t maxSize)
+{
+ EP_STATUS result;
+
+ if (size > maxSize)
+ {
+ return false;
+ }
+
+
+ if(!configured()) {
+ return false;
+ }
+
+ /* Send report */
+ result = endpointWrite(endpoint, buffer, size);
+
+ if (result != EP_PENDING)
+ {
+ return false;
+ }
+
+ /* Wait for completion */
+ do {
+ result = endpointWriteResult(endpoint);
+ } while ((result == EP_PENDING) && configured());
+
+ return (result == EP_COMPLETED);
+}
+
+
+bool USBDevice::writeNB(uint8_t endpoint, uint8_t * buffer, uint32_t size, uint32_t maxSize)
+{
+ EP_STATUS result;
+
+ if (size > maxSize)
+ {
+ return false;
+ }
+
+ if(!configured()) {
+ return false;
+ }
+
+ /* Send report */
+ result = endpointWrite(endpoint, buffer, size);
+
+ if (result != EP_PENDING)
+ {
+ return false;
+ }
+
+ result = endpointWriteResult(endpoint);
+
+ return (result == EP_COMPLETED);
+}
+
+
+
+bool USBDevice::readEP(uint8_t endpoint, uint8_t * buffer, uint32_t * size, uint32_t maxSize)
+{
+ EP_STATUS result;
+
+ if(!configured()) {
+ return false;
+ }
+
+ /* Wait for completion */
+ do {
+ result = endpointReadResult(endpoint, buffer, size);
+ } while ((result == EP_PENDING) && configured());
+
+ return (result == EP_COMPLETED);
+}
+
+
+bool USBDevice::readEP_NB(uint8_t endpoint, uint8_t * buffer, uint32_t * size, uint32_t maxSize)
+{
+ EP_STATUS result;
+
+ if(!configured()) {
+ return false;
+ }
+
+ result = endpointReadResult(endpoint, buffer, size);
+
+ return (result == EP_COMPLETED);
+}
+
+
+
+uint8_t * USBDevice::deviceDesc() {
+ static uint8_t deviceDescriptor[] = {
+ DEVICE_DESCRIPTOR_LENGTH, /* bLength */
+ DEVICE_DESCRIPTOR, /* bDescriptorType */
+ LSB(USB_VERSION_2_0), /* bcdUSB (LSB) */
+ MSB(USB_VERSION_2_0), /* bcdUSB (MSB) */
+ 0x00, /* bDeviceClass */
+ 0x00, /* bDeviceSubClass */
+ 0x00, /* bDeviceprotocol */
+ MAX_PACKET_SIZE_EP0, /* bMaxPacketSize0 */
+ (uint8_t)(LSB(VENDOR_ID)), /* idVendor (LSB) */
+ (uint8_t)(MSB(VENDOR_ID)), /* idVendor (MSB) */
+ (uint8_t)(LSB(PRODUCT_ID)), /* idProduct (LSB) */
+ (uint8_t)(MSB(PRODUCT_ID)), /* idProduct (MSB) */
+ (uint8_t)(LSB(PRODUCT_RELEASE)), /* bcdDevice (LSB) */
+ (uint8_t)(MSB(PRODUCT_RELEASE)), /* bcdDevice (MSB) */
+ STRING_OFFSET_IMANUFACTURER, /* iManufacturer */
+ STRING_OFFSET_IPRODUCT, /* iProduct */
+ STRING_OFFSET_ISERIAL, /* iSerialNumber */
+ 0x01 /* bNumConfigurations */
+ };
+ return deviceDescriptor;
+}
+
+uint8_t * USBDevice::stringLangidDesc() {
+ static uint8_t stringLangidDescriptor[] = {
+ 0x04, /*bLength*/
+ STRING_DESCRIPTOR, /*bDescriptorType 0x03*/
+ 0x09,0x04, /*bString Lang ID - 0x0409 - English*/
+ };
+ return stringLangidDescriptor;
+}
+
+uint8_t * USBDevice::stringImanufacturerDesc() {
+ static uint8_t stringImanufacturerDescriptor[] = {
+ 0x12, /*bLength*/
+ STRING_DESCRIPTOR, /*bDescriptorType 0x03*/
+ 'm',0,'b',0,'e',0,'d',0,'.',0,'o',0,'r',0,'g',0, /*bString iManufacturer - mbed.org*/
+ };
+ return stringImanufacturerDescriptor;
+}
+
+uint8_t * USBDevice::stringIserialDesc() {
+ static uint8_t stringIserialDescriptor[] = {
+ 0x16, /*bLength*/
+ STRING_DESCRIPTOR, /*bDescriptorType 0x03*/
+ '0',0,'1',0,'2',0,'3',0,'4',0,'5',0,'6',0,'7',0,'8',0,'9',0, /*bString iSerial - 0123456789*/
+ };
+ return stringIserialDescriptor;
+}
+
+uint8_t * USBDevice::stringIConfigurationDesc() {
+ static uint8_t stringIconfigurationDescriptor[] = {
+ 0x06, /*bLength*/
+ STRING_DESCRIPTOR, /*bDescriptorType 0x03*/
+ '0',0,'1',0, /*bString iConfiguration - 01*/
+ };
+ return stringIconfigurationDescriptor;
+}
+
+uint8_t * USBDevice::stringIinterfaceDesc() {
+ static uint8_t stringIinterfaceDescriptor[] = {
+ 0x08, /*bLength*/
+ STRING_DESCRIPTOR, /*bDescriptorType 0x03*/
+ 'U',0,'S',0,'B',0, /*bString iInterface - USB*/
+ };
+ return stringIinterfaceDescriptor;
+}
+
+uint8_t * USBDevice::stringIproductDesc() {
+ static uint8_t stringIproductDescriptor[] = {
+ 0x16, /*bLength*/
+ STRING_DESCRIPTOR, /*bDescriptorType 0x03*/
+ 'U',0,'S',0,'B',0,' ',0,'D',0,'E',0,'V',0,'I',0,'C',0,'E',0 /*bString iProduct - USB DEVICE*/
+ };
+ return stringIproductDescriptor;
+}
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/USBDevice/USBDevice/USBDevice.h Fri Aug 29 08:33:17 2014 +0000
@@ -0,0 +1,271 @@
+/* Copyright (c) 2010-2011 mbed.org, MIT License
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy of this software
+* and associated documentation files (the "Software"), to deal in the Software without
+* restriction, including without limitation the rights to use, copy, modify, merge, publish,
+* distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the
+* Software is furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in all copies or
+* substantial portions of the Software.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING
+* BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
+* DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+*/
+
+#ifndef USBDEVICE_H
+#define USBDEVICE_H
+
+#include "mbed.h"
+#include "USBDevice_Types.h"
+#include "USBHAL.h"
+
+class USBDevice: public USBHAL
+{
+public:
+ USBDevice(uint16_t vendor_id, uint16_t product_id, uint16_t product_release);
+
+ /*
+ * Check if the device is configured
+ *
+ * @returns true if configured, false otherwise
+ */
+ bool configured(void);
+
+ /*
+ * Connect a device
+ *
+ * @param blocking: block if not configured
+ */
+ void connect(bool blocking = true);
+
+ /*
+ * Disconnect a device
+ */
+ void disconnect(void);
+
+ /*
+ * Add an endpoint
+ *
+ * @param endpoint endpoint which will be added
+ * @param maxPacket Maximum size of a packet which can be sent for this endpoint
+ * @returns true if successful, false otherwise
+ */
+ bool addEndpoint(uint8_t endpoint, uint32_t maxPacket);
+
+ /*
+ * Start a reading on a certain endpoint.
+ * You can access the result of the reading by USBDevice_read
+ *
+ * @param endpoint endpoint which will be read
+ * @param maxSize the maximum length that can be read
+ * @return true if successful
+ */
+ bool readStart(uint8_t endpoint, uint32_t maxSize);
+
+ /*
+ * Read a certain endpoint. Before calling this function, USBUSBDevice_readStart
+ * must be called.
+ *
+ * Warning: blocking
+ *
+ * @param endpoint endpoint which will be read
+ * @param buffer buffer will be filled with the data received
+ * @param size the number of bytes read will be stored in *size
+ * @param maxSize the maximum length that can be read
+ * @returns true if successful
+ */
+ bool readEP(uint8_t endpoint, uint8_t * buffer, uint32_t * size, uint32_t maxSize);
+
+ /*
+ * Read a certain endpoint.
+ *
+ * Warning: non blocking
+ *
+ * @param endpoint endpoint which will be read
+ * @param buffer buffer will be filled with the data received (if data are available)
+ * @param size the number of bytes read will be stored in *size
+ * @param maxSize the maximum length that can be read
+ * @returns true if successful
+ */
+ bool readEP_NB(uint8_t endpoint, uint8_t * buffer, uint32_t * size, uint32_t maxSize);
+
+ /*
+ * Write a certain endpoint.
+ *
+ * Warning: blocking
+ *
+ * @param endpoint endpoint to write
+ * @param buffer data contained in buffer will be write
+ * @param size the number of bytes to write
+ * @param maxSize the maximum length that can be written on this endpoint
+ */
+ bool write(uint8_t endpoint, uint8_t * buffer, uint32_t size, uint32_t maxSize);
+
+
+ /*
+ * Write a certain endpoint.
+ *
+ * Warning: non blocking
+ *
+ * @param endpoint endpoint to write
+ * @param buffer data contained in buffer will be write
+ * @param size the number of bytes to write
+ * @param maxSize the maximum length that can be written on this endpoint
+ */
+ bool writeNB(uint8_t endpoint, uint8_t * buffer, uint32_t size, uint32_t maxSize);
+
+
+ /*
+ * Called by USBDevice layer on bus reset. Warning: Called in ISR context
+ *
+ * May be used to reset state
+ */
+ virtual void USBCallback_busReset(void) {};
+
+ /*
+ * Called by USBDevice on Endpoint0 request. Warning: Called in ISR context
+ * This is used to handle extensions to standard requests
+ * and class specific requests
+ *
+ * @returns true if class handles this request
+ */
+ virtual bool USBCallback_request() { return false; };
+
+ /*
+ * Called by USBDevice on Endpoint0 request completion
+ * if the 'notify' flag has been set to true. Warning: Called in ISR context
+ *
+ * In this case it is used to indicate that a HID report has
+ * been received from the host on endpoint 0
+ *
+ * @param buf buffer received on endpoint 0
+ * @param length length of this buffer
+ */
+ virtual void USBCallback_requestCompleted(uint8_t * buf, uint32_t length) {};
+
+ /*
+ * Called by USBDevice layer. Set configuration of the device.
+ * For instance, you can add all endpoints that you need on this function.
+ *
+ * @param configuration Number of the configuration
+ */
+ virtual bool USBCallback_setConfiguration(uint8_t configuration) { return false; };
+
+ /*
+ * Called by USBDevice layer. Set interface/alternate of the device.
+ *
+ * @param interface Number of the interface to be configured
+ * @param alternate Number of the alternate to be configured
+ * @returns true if class handles this request
+ */
+ virtual bool USBCallback_setInterface(uint16_t interface, uint8_t alternate) { return false; };
+
+ /*
+ * Get device descriptor. Warning: this method has to store the length of the report descriptor in reportLength.
+ *
+ * @returns pointer to the device descriptor
+ */
+ virtual uint8_t * deviceDesc();
+
+ /*
+ * Get configuration descriptor
+ *
+ * @returns pointer to the configuration descriptor
+ */
+ virtual uint8_t * configurationDesc(){return NULL;};
+
+ /*
+ * Get string lang id descriptor
+ *
+ * @return pointer to the string lang id descriptor
+ */
+ virtual uint8_t * stringLangidDesc();
+
+ /*
+ * Get string manufacturer descriptor
+ *
+ * @returns pointer to the string manufacturer descriptor
+ */
+ virtual uint8_t * stringImanufacturerDesc();
+
+ /*
+ * Get string product descriptor
+ *
+ * @returns pointer to the string product descriptor
+ */
+ virtual uint8_t * stringIproductDesc();
+
+ /*
+ * Get string serial descriptor
+ *
+ * @returns pointer to the string serial descriptor
+ */
+ virtual uint8_t * stringIserialDesc();
+
+ /*
+ * Get string configuration descriptor
+ *
+ * @returns pointer to the string configuration descriptor
+ */
+ virtual uint8_t * stringIConfigurationDesc();
+
+ /*
+ * Get string interface descriptor
+ *
+ * @returns pointer to the string interface descriptor
+ */
+ virtual uint8_t * stringIinterfaceDesc();
+
+ /*
+ * Get the length of the report descriptor
+ *
+ * @returns length of the report descriptor
+ */
+ virtual uint16_t reportDescLength() { return 0; };
+
+
+
+protected:
+ virtual void busReset(void);
+ virtual void EP0setupCallback(void);
+ virtual void EP0out(void);
+ virtual void EP0in(void);
+ virtual void connectStateChanged(unsigned int connected);
+ virtual void suspendStateChanged(unsigned int suspended);
+ uint8_t * findDescriptor(uint8_t descriptorType);
+ CONTROL_TRANSFER * getTransferPtr(void);
+
+ uint16_t VENDOR_ID;
+ uint16_t PRODUCT_ID;
+ uint16_t PRODUCT_RELEASE;
+
+private:
+ bool addRateFeedbackEndpoint(uint8_t endpoint, uint32_t maxPacket);
+ bool requestGetDescriptor(void);
+ bool controlOut(void);
+ bool controlIn(void);
+ bool requestSetAddress(void);
+ bool requestSetConfiguration(void);
+ bool requestSetFeature(void);
+ bool requestClearFeature(void);
+ bool requestGetStatus(void);
+ bool requestSetup(void);
+ bool controlSetup(void);
+ void decodeSetupPacket(uint8_t *data, SETUP_PACKET *packet);
+ bool requestGetConfiguration(void);
+ bool requestGetInterface(void);
+ bool requestSetInterface(void);
+
+ CONTROL_TRANSFER transfer;
+ USB_DEVICE device;
+
+ uint16_t currentInterface;
+ uint8_t currentAlternate;
+};
+
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/USBDevice/USBDevice/USBDevice_Types.h Fri Aug 29 08:33:17 2014 +0000
@@ -0,0 +1,83 @@
+/* Copyright (c) 2010-2011 mbed.org, MIT License
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy of this software
+* and associated documentation files (the "Software"), to deal in the Software without
+* restriction, including without limitation the rights to use, copy, modify, merge, publish,
+* distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the
+* Software is furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in all copies or
+* substantial portions of the Software.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING
+* BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
+* DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+*/
+
+#ifndef USBDEVICE_TYPES_H
+#define USBDEVICE_TYPES_H
+
+/* Standard requests */
+#define GET_STATUS (0)
+#define CLEAR_FEATURE (1)
+#define SET_FEATURE (3)
+#define SET_ADDRESS (5)
+#define GET_DESCRIPTOR (6)
+#define SET_DESCRIPTOR (7)
+#define GET_CONFIGURATION (8)
+#define SET_CONFIGURATION (9)
+#define GET_INTERFACE (10)
+#define SET_INTERFACE (11)
+
+/* bmRequestType.dataTransferDirection */
+#define HOST_TO_DEVICE (0)
+#define DEVICE_TO_HOST (1)
+
+/* bmRequestType.Type*/
+#define STANDARD_TYPE (0)
+#define CLASS_TYPE (1)
+#define VENDOR_TYPE (2)
+#define RESERVED_TYPE (3)
+
+/* bmRequestType.Recipient */
+#define DEVICE_RECIPIENT (0)
+#define INTERFACE_RECIPIENT (1)
+#define ENDPOINT_RECIPIENT (2)
+#define OTHER_RECIPIENT (3)
+
+/* Descriptors */
+#define DESCRIPTOR_TYPE(wValue) (wValue >> 8)
+#define DESCRIPTOR_INDEX(wValue) (wValue & 0xff)
+
+typedef struct {
+ struct {
+ uint8_t dataTransferDirection;
+ uint8_t Type;
+ uint8_t Recipient;
+ } bmRequestType;
+ uint8_t bRequest;
+ uint16_t wValue;
+ uint16_t wIndex;
+ uint16_t wLength;
+} SETUP_PACKET;
+
+typedef struct {
+ SETUP_PACKET setup;
+ uint8_t *ptr;
+ uint32_t remaining;
+ uint8_t direction;
+ bool zlp;
+ bool notify;
+} CONTROL_TRANSFER;
+
+typedef enum {ATTACHED, POWERED, DEFAULT, ADDRESS, CONFIGURED} DEVICE_STATE;
+
+typedef struct {
+ volatile DEVICE_STATE state;
+ uint8_t configuration;
+ bool suspended;
+} USB_DEVICE;
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/USBDevice/USBDevice/USBEndpoints.h Fri Aug 29 08:33:17 2014 +0000
@@ -0,0 +1,52 @@
+/* Copyright (c) 2010-2011 mbed.org, MIT License
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy of this software
+* and associated documentation files (the "Software"), to deal in the Software without
+* restriction, including without limitation the rights to use, copy, modify, merge, publish,
+* distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the
+* Software is furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in all copies or
+* substantial portions of the Software.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING
+* BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
+* DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+*/
+
+#ifndef USBENDPOINTS_H
+#define USBENDPOINTS_H
+
+/* SETUP packet size */
+#define SETUP_PACKET_SIZE (8)
+
+/* Options flags for configuring endpoints */
+#define DEFAULT_OPTIONS (0)
+#define SINGLE_BUFFERED (1U << 0)
+#define ISOCHRONOUS (1U << 1)
+#define RATE_FEEDBACK_MODE (1U << 2) /* Interrupt endpoints only */
+
+/* Endpoint transfer status, for endpoints > 0 */
+typedef enum {
+ EP_COMPLETED, /* Transfer completed */
+ EP_PENDING, /* Transfer in progress */
+ EP_INVALID, /* Invalid parameter */
+ EP_STALLED, /* Endpoint stalled */
+} EP_STATUS;
+
+/* Include configuration for specific target */
+#if defined(TARGET_LPC1768) || defined(TARGET_LPC2368) || defined(TARGET_LPC4088)
+#include "USBEndpoints_LPC17_LPC23.h"
+#elif defined(TARGET_LPC11UXX) || defined(TARGET_LPC1347) || defined (TARGET_LPC11U6X)
+#include "USBEndpoints_LPC11U.h"
+#elif defined(TARGET_KL25Z) | defined(TARGET_KL46Z) | defined(TARGET_K20D5M) | defined(TARGET_K64F)
+#include "USBEndpoints_KL25Z.h"
+#elif defined (TARGET_STM32F4XX)
+#include "USBEndpoints_STM32F4.h"
+#else
+#error "Unknown target type"
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/USBDevice/USBDevice/USBEndpoints_KL25Z.h Fri Aug 29 08:33:17 2014 +0000 @@ -0,0 +1,93 @@ +/* Copyright (c) 2010-2011 mbed.org, MIT License +* +* Permission is hereby granted, free of charge, to any person obtaining a copy of this software +* and associated documentation files (the "Software"), to deal in the Software without +* restriction, including without limitation the rights to use, copy, modify, merge, publish, +* distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the +* Software is furnished to do so, subject to the following conditions: +* +* The above copyright notice and this permission notice shall be included in all copies or +* substantial portions of the Software. +* +* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING +* BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND +* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, +* DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, +* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. +*/ + +#define NUMBER_OF_LOGICAL_ENDPOINTS (16) +#define NUMBER_OF_PHYSICAL_ENDPOINTS (NUMBER_OF_LOGICAL_ENDPOINTS * 2) + +/* Define physical endpoint numbers */ + +/* Endpoint No. */ +/* ---------------- */ +#define EP0OUT (0) +#define EP0IN (1) +#define EP1OUT (2) +#define EP1IN (3) +#define EP2OUT (4) +#define EP2IN (5) +#define EP3OUT (6) +#define EP3IN (7) +#define EP4OUT (8) +#define EP4IN (9) +#define EP5OUT (10) +#define EP5IN (11) +#define EP6OUT (12) +#define EP6IN (13) +#define EP7OUT (14) +#define EP7IN (15) +#define EP8OUT (16) +#define EP8IN (17) +#define EP9OUT (18) +#define EP9IN (19) +#define EP10OUT (20) +#define EP10IN (21) +#define EP11OUT (22) +#define EP11IN (23) +#define EP12OUT (24) +#define EP12IN (25) +#define EP13OUT (26) +#define EP13IN (27) +#define EP14OUT (28) +#define EP14IN (29) +#define EP15OUT (30) +#define EP15IN (31) + +/* Maximum Packet sizes */ + +#define MAX_PACKET_SIZE_EP0 (64) +#define MAX_PACKET_SIZE_EP1 (64) +#define MAX_PACKET_SIZE_EP2 (64) +#define MAX_PACKET_SIZE_EP3 (1023) +#define MAX_PACKET_SIZE_EP4 (64) +#define MAX_PACKET_SIZE_EP5 (64) +#define MAX_PACKET_SIZE_EP6 (64) +#define MAX_PACKET_SIZE_EP7 (64) +#define MAX_PACKET_SIZE_EP8 (64) +#define MAX_PACKET_SIZE_EP9 (64) +#define MAX_PACKET_SIZE_EP10 (64) +#define MAX_PACKET_SIZE_EP11 (64) +#define MAX_PACKET_SIZE_EP12 (64) +#define MAX_PACKET_SIZE_EP13 (64) +#define MAX_PACKET_SIZE_EP14 (64) +#define MAX_PACKET_SIZE_EP15 (64) + +/* Generic endpoints - intended to be portable accross devices */ +/* and be suitable for simple USB devices. */ + +/* Bulk endpoints */ +#define EPBULK_OUT (EP2OUT) +#define EPBULK_IN (EP2IN) +/* Interrupt endpoints */ +#define EPINT_OUT (EP1OUT) +#define EPINT_IN (EP1IN) +/* Isochronous endpoints */ +#define EPISO_OUT (EP3OUT) +#define EPISO_IN (EP3IN) + +#define MAX_PACKET_SIZE_EPBULK (MAX_PACKET_SIZE_EP2) +#define MAX_PACKET_SIZE_EPINT (MAX_PACKET_SIZE_EP1) +#define MAX_PACKET_SIZE_EPISO (MAX_PACKET_SIZE_EP3)
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/USBDevice/USBDevice/USBEndpoints_LPC11U.h Fri Aug 29 08:33:17 2014 +0000 @@ -0,0 +1,65 @@ +/* Copyright (c) 2010-2011 mbed.org, MIT License +* +* Permission is hereby granted, free of charge, to any person obtaining a copy of this software +* and associated documentation files (the "Software"), to deal in the Software without +* restriction, including without limitation the rights to use, copy, modify, merge, publish, +* distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the +* Software is furnished to do so, subject to the following conditions: +* +* The above copyright notice and this permission notice shall be included in all copies or +* substantial portions of the Software. +* +* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING +* BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND +* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, +* DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, +* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. +*/ + +#define NUMBER_OF_LOGICAL_ENDPOINTS (5) +#define NUMBER_OF_PHYSICAL_ENDPOINTS (NUMBER_OF_LOGICAL_ENDPOINTS * 2) + +/* Define physical endpoint numbers */ + +/* Endpoint No. Type(s) MaxPacket DoubleBuffer */ +/* ---------------- ------------ ---------- --- */ +#define EP0OUT (0) /* Control 64 No */ +#define EP0IN (1) /* Control 64 No */ +#define EP1OUT (2) /* Int/Bulk/Iso 64/64/1023 Yes */ +#define EP1IN (3) /* Int/Bulk/Iso 64/64/1023 Yes */ +#define EP2OUT (4) /* Int/Bulk/Iso 64/64/1023 Yes */ +#define EP2IN (5) /* Int/Bulk/Iso 64/64/1023 Yes */ +#define EP3OUT (6) /* Int/Bulk/Iso 64/64/1023 Yes */ +#define EP3IN (7) /* Int/Bulk/Iso 64/64/1023 Yes */ +#define EP4OUT (8) /* Int/Bulk/Iso 64/64/1023 Yes */ +#define EP4IN (9) /* Int/Bulk/Iso 64/64/1023 Yes */ + +/* Maximum Packet sizes */ + +#define MAX_PACKET_SIZE_EP0 (64) +#define MAX_PACKET_SIZE_EP1 (64) /* Int/Bulk */ +#define MAX_PACKET_SIZE_EP2 (64) /* Int/Bulk */ +#define MAX_PACKET_SIZE_EP3 (64) /* Int/Bulk */ +#define MAX_PACKET_SIZE_EP4 (64) /* Int/Bulk */ + +#define MAX_PACKET_SIZE_EP1_ISO (1023) /* Isochronous */ +#define MAX_PACKET_SIZE_EP2_ISO (1023) /* Isochronous */ +#define MAX_PACKET_SIZE_EP3_ISO (1023) /* Isochronous */ +#define MAX_PACKET_SIZE_EP4_ISO (1023) /* Isochronous */ + +/* Generic endpoints - intended to be portable accross devices */ +/* and be suitable for simple USB devices. */ + +/* Bulk endpoint */ +#define EPBULK_OUT (EP2OUT) +#define EPBULK_IN (EP2IN) +/* Interrupt endpoint */ +#define EPINT_OUT (EP1OUT) +#define EPINT_IN (EP1IN) +/* Isochronous endpoint */ +#define EPISO_OUT (EP3OUT) +#define EPISO_IN (EP3IN) + +#define MAX_PACKET_SIZE_EPBULK (MAX_PACKET_SIZE_EP2) +#define MAX_PACKET_SIZE_EPINT (MAX_PACKET_SIZE_EP1) +#define MAX_PACKET_SIZE_EPISO (MAX_PACKET_SIZE_EP3_ISO)
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/USBDevice/USBDevice/USBEndpoints_LPC17_LPC23.h Fri Aug 29 08:33:17 2014 +0000 @@ -0,0 +1,93 @@ +/* Copyright (c) 2010-2011 mbed.org, MIT License +* +* Permission is hereby granted, free of charge, to any person obtaining a copy of this software +* and associated documentation files (the "Software"), to deal in the Software without +* restriction, including without limitation the rights to use, copy, modify, merge, publish, +* distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the +* Software is furnished to do so, subject to the following conditions: +* +* The above copyright notice and this permission notice shall be included in all copies or +* substantial portions of the Software. +* +* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING +* BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND +* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, +* DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, +* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. +*/ + +#define NUMBER_OF_LOGICAL_ENDPOINTS (16) +#define NUMBER_OF_PHYSICAL_ENDPOINTS (NUMBER_OF_LOGICAL_ENDPOINTS * 2) + +/* Define physical endpoint numbers */ + +/* Endpoint No. Type(s) MaxPacket DoubleBuffer */ +/* ---------------- ------------ ---------- --- */ +#define EP0OUT (0) /* Control 64 No */ +#define EP0IN (1) /* Control 64 No */ +#define EP1OUT (2) /* Interrupt 64 No */ +#define EP1IN (3) /* Interrupt 64 No */ +#define EP2OUT (4) /* Bulk 64 Yes */ +#define EP2IN (5) /* Bulk 64 Yes */ +#define EP3OUT (6) /* Isochronous 1023 Yes */ +#define EP3IN (7) /* Isochronous 1023 Yes */ +#define EP4OUT (8) /* Interrupt 64 No */ +#define EP4IN (9) /* Interrupt 64 No */ +#define EP5OUT (10) /* Bulk 64 Yes */ +#define EP5IN (11) /* Bulk 64 Yes */ +#define EP6OUT (12) /* Isochronous 1023 Yes */ +#define EP6IN (13) /* Isochronous 1023 Yes */ +#define EP7OUT (14) /* Interrupt 64 No */ +#define EP7IN (15) /* Interrupt 64 No */ +#define EP8OUT (16) /* Bulk 64 Yes */ +#define EP8IN (17) /* Bulk 64 Yes */ +#define EP9OUT (18) /* Isochronous 1023 Yes */ +#define EP9IN (19) /* Isochronous 1023 Yes */ +#define EP10OUT (20) /* Interrupt 64 No */ +#define EP10IN (21) /* Interrupt 64 No */ +#define EP11OUT (22) /* Bulk 64 Yes */ +#define EP11IN (23) /* Bulk 64 Yes */ +#define EP12OUT (24) /* Isochronous 1023 Yes */ +#define EP12IN (25) /* Isochronous 1023 Yes */ +#define EP13OUT (26) /* Interrupt 64 No */ +#define EP13IN (27) /* Interrupt 64 No */ +#define EP14OUT (28) /* Bulk 64 Yes */ +#define EP14IN (29) /* Bulk 64 Yes */ +#define EP15OUT (30) /* Bulk 64 Yes */ +#define EP15IN (31) /* Bulk 64 Yes */ + +/* Maximum Packet sizes */ + +#define MAX_PACKET_SIZE_EP0 (64) +#define MAX_PACKET_SIZE_EP1 (64) +#define MAX_PACKET_SIZE_EP2 (64) +#define MAX_PACKET_SIZE_EP3 (1023) +#define MAX_PACKET_SIZE_EP4 (64) +#define MAX_PACKET_SIZE_EP5 (64) +#define MAX_PACKET_SIZE_EP6 (1023) +#define MAX_PACKET_SIZE_EP7 (64) +#define MAX_PACKET_SIZE_EP8 (64) +#define MAX_PACKET_SIZE_EP9 (1023) +#define MAX_PACKET_SIZE_EP10 (64) +#define MAX_PACKET_SIZE_EP11 (64) +#define MAX_PACKET_SIZE_EP12 (1023) +#define MAX_PACKET_SIZE_EP13 (64) +#define MAX_PACKET_SIZE_EP14 (64) +#define MAX_PACKET_SIZE_EP15 (64) + +/* Generic endpoints - intended to be portable accross devices */ +/* and be suitable for simple USB devices. */ + +/* Bulk endpoints */ +#define EPBULK_OUT (EP2OUT) +#define EPBULK_IN (EP2IN) +/* Interrupt endpoints */ +#define EPINT_OUT (EP1OUT) +#define EPINT_IN (EP1IN) +/* Isochronous endpoints */ +#define EPISO_OUT (EP3OUT) +#define EPISO_IN (EP3IN) + +#define MAX_PACKET_SIZE_EPBULK (MAX_PACKET_SIZE_EP2) +#define MAX_PACKET_SIZE_EPINT (MAX_PACKET_SIZE_EP1) +#define MAX_PACKET_SIZE_EPISO (MAX_PACKET_SIZE_EP3)
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/USBDevice/USBDevice/USBEndpoints_STM32F4.h Fri Aug 29 08:33:17 2014 +0000 @@ -0,0 +1,61 @@ +/* Copyright (c) 2010-2011 mbed.org, MIT License +* +* Permission is hereby granted, free of charge, to any person obtaining a copy of this software +* and associated documentation files (the "Software"), to deal in the Software without +* restriction, including without limitation the rights to use, copy, modify, merge, publish, +* distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the +* Software is furnished to do so, subject to the following conditions: +* +* The above copyright notice and this permission notice shall be included in all copies or +* substantial portions of the Software. +* +* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING +* BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND +* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, +* DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, +* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. +*/ + +#define NUMBER_OF_LOGICAL_ENDPOINTS (4) +#define NUMBER_OF_PHYSICAL_ENDPOINTS (NUMBER_OF_LOGICAL_ENDPOINTS * 2) + +/* Define physical endpoint numbers */ + +/* Endpoint No. Type(s) MaxPacket DoubleBuffer */ +/* ---------------- ------------ ---------- --- */ +#define EP0OUT (0) /* Control 64 No */ +#define EP0IN (1) /* Control 64 No */ +#define EP1OUT (2) /* Int/Bulk/Iso 64/64/1023 Yes */ +#define EP1IN (3) /* Int/Bulk/Iso 64/64/1023 Yes */ +#define EP2OUT (4) /* Int/Bulk/Iso 64/64/1023 Yes */ +#define EP2IN (5) /* Int/Bulk/Iso 64/64/1023 Yes */ +#define EP3OUT (6) /* Int/Bulk/Iso 64/64/1023 Yes */ +#define EP3IN (7) /* Int/Bulk/Iso 64/64/1023 Yes */ + +/* Maximum Packet sizes */ + +#define MAX_PACKET_SIZE_EP0 (64) +#define MAX_PACKET_SIZE_EP1 (64) /* Int/Bulk */ +#define MAX_PACKET_SIZE_EP2 (64) /* Int/Bulk */ +#define MAX_PACKET_SIZE_EP3 (64) /* Int/Bulk */ + +#define MAX_PACKET_SIZE_EP1_ISO (1023) /* Isochronous */ +#define MAX_PACKET_SIZE_EP2_ISO (1023) /* Isochronous */ +#define MAX_PACKET_SIZE_EP3_ISO (1023) /* Isochronous */ + +/* Generic endpoints - intended to be portable accross devices */ +/* and be suitable for simple USB devices. */ + +/* Bulk endpoint */ +#define EPBULK_OUT (EP2OUT) +#define EPBULK_IN (EP2IN) +/* Interrupt endpoint */ +#define EPINT_OUT (EP1OUT) +#define EPINT_IN (EP1IN) +/* Isochronous endpoint */ +#define EPISO_OUT (EP3OUT) +#define EPISO_IN (EP3IN) + +#define MAX_PACKET_SIZE_EPBULK (MAX_PACKET_SIZE_EP2) +#define MAX_PACKET_SIZE_EPINT (MAX_PACKET_SIZE_EP1) +#define MAX_PACKET_SIZE_EPISO (MAX_PACKET_SIZE_EP3_ISO)
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/USBDevice/USBDevice/USBHAL.h Fri Aug 29 08:33:17 2014 +0000
@@ -0,0 +1,121 @@
+/* Copyright (c) 2010-2011 mbed.org, MIT License
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy of this software
+* and associated documentation files (the "Software"), to deal in the Software without
+* restriction, including without limitation the rights to use, copy, modify, merge, publish,
+* distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the
+* Software is furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in all copies or
+* substantial portions of the Software.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING
+* BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
+* DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+*/
+
+#ifndef USBBUSINTERFACE_H
+#define USBBUSINTERFACE_H
+
+#include "mbed.h"
+#include "USBEndpoints.h"
+#include "toolchain.h"
+
+//#ifdef __GNUC__
+//#define __packed __attribute__ ((__packed__))
+//#endif
+
+class USBHAL {
+public:
+ /* Configuration */
+ USBHAL();
+ ~USBHAL();
+ void connect(void);
+ void disconnect(void);
+ void configureDevice(void);
+ void unconfigureDevice(void);
+ void setAddress(uint8_t address);
+ void remoteWakeup(void);
+
+ /* Endpoint 0 */
+ void EP0setup(uint8_t *buffer);
+ void EP0read(void);
+ void EP0readStage(void);
+ uint32_t EP0getReadResult(uint8_t *buffer);
+ void EP0write(uint8_t *buffer, uint32_t size);
+ void EP0getWriteResult(void);
+ void EP0stall(void);
+
+ /* Other endpoints */
+ EP_STATUS endpointRead(uint8_t endpoint, uint32_t maximumSize);
+ EP_STATUS endpointReadResult(uint8_t endpoint, uint8_t *data, uint32_t *bytesRead);
+ EP_STATUS endpointWrite(uint8_t endpoint, uint8_t *data, uint32_t size);
+ EP_STATUS endpointWriteResult(uint8_t endpoint);
+ void stallEndpoint(uint8_t endpoint);
+ void unstallEndpoint(uint8_t endpoint);
+ bool realiseEndpoint(uint8_t endpoint, uint32_t maxPacket, uint32_t options);
+ bool getEndpointStallState(unsigned char endpoint);
+ uint32_t endpointReadcore(uint8_t endpoint, uint8_t *buffer);
+
+protected:
+ virtual void busReset(void){};
+ virtual void EP0setupCallback(void){};
+ virtual void EP0out(void){};
+ virtual void EP0in(void){};
+ virtual void connectStateChanged(unsigned int connected){};
+ virtual void suspendStateChanged(unsigned int suspended){};
+ virtual void SOF(int frameNumber){};
+
+ virtual bool EP1_OUT_callback(){return false;};
+ virtual bool EP1_IN_callback(){return false;};
+ virtual bool EP2_OUT_callback(){return false;};
+ virtual bool EP2_IN_callback(){return false;};
+ virtual bool EP3_OUT_callback(){return false;};
+ virtual bool EP3_IN_callback(){return false;};
+#if !defined(TARGET_STM32F4)
+ virtual bool EP4_OUT_callback(){return false;};
+ virtual bool EP4_IN_callback(){return false;};
+#if !defined(TARGET_LPC11U24)
+ virtual bool EP5_OUT_callback(){return false;};
+ virtual bool EP5_IN_callback(){return false;};
+ virtual bool EP6_OUT_callback(){return false;};
+ virtual bool EP6_IN_callback(){return false;};
+ virtual bool EP7_OUT_callback(){return false;};
+ virtual bool EP7_IN_callback(){return false;};
+ virtual bool EP8_OUT_callback(){return false;};
+ virtual bool EP8_IN_callback(){return false;};
+ virtual bool EP9_OUT_callback(){return false;};
+ virtual bool EP9_IN_callback(){return false;};
+ virtual bool EP10_OUT_callback(){return false;};
+ virtual bool EP10_IN_callback(){return false;};
+ virtual bool EP11_OUT_callback(){return false;};
+ virtual bool EP11_IN_callback(){return false;};
+ virtual bool EP12_OUT_callback(){return false;};
+ virtual bool EP12_IN_callback(){return false;};
+ virtual bool EP13_OUT_callback(){return false;};
+ virtual bool EP13_IN_callback(){return false;};
+ virtual bool EP14_OUT_callback(){return false;};
+ virtual bool EP14_IN_callback(){return false;};
+ virtual bool EP15_OUT_callback(){return false;};
+ virtual bool EP15_IN_callback(){return false;};
+#endif
+#endif
+
+private:
+ void usbisr(void);
+ static void _usbisr(void);
+ static USBHAL * instance;
+
+#if defined(TARGET_LPC11U24)
+ bool (USBHAL::*epCallback[10 - 2])(void);
+#elif defined(TARGET_STM32F4XX)
+ bool (USBHAL::*epCallback[8 - 2])(void);
+#else
+ bool (USBHAL::*epCallback[32 - 2])(void);
+#endif
+
+
+};
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/USBDevice/USBDevice/USBHAL_KL25Z.cpp Fri Aug 29 08:33:17 2014 +0000
@@ -0,0 +1,537 @@
+/* Copyright (c) 2010-2011 mbed.org, MIT License
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy of this software
+* and associated documentation files (the "Software"), to deal in the Software without
+* restriction, including without limitation the rights to use, copy, modify, merge, publish,
+* distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the
+* Software is furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in all copies or
+* substantial portions of the Software.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING
+* BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
+* DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+*/
+
+#if defined(TARGET_KL25Z) | defined(TARGET_KL46Z) | defined(TARGET_K20D5M) | defined(TARGET_K64F)
+
+#include "USBHAL.h"
+
+USBHAL * USBHAL::instance;
+
+static volatile int epComplete = 0;
+
+// Convert physical endpoint number to register bit
+#define EP(endpoint) (1<<(endpoint))
+
+// Convert physical to logical
+#define PHY_TO_LOG(endpoint) ((endpoint)>>1)
+
+// Get endpoint direction
+#define IN_EP(endpoint) ((endpoint) & 1U ? true : false)
+#define OUT_EP(endpoint) ((endpoint) & 1U ? false : true)
+
+#define BD_OWN_MASK (1<<7)
+#define BD_DATA01_MASK (1<<6)
+#define BD_KEEP_MASK (1<<5)
+#define BD_NINC_MASK (1<<4)
+#define BD_DTS_MASK (1<<3)
+#define BD_STALL_MASK (1<<2)
+
+#define TX 1
+#define RX 0
+#define ODD 0
+#define EVEN 1
+// this macro waits a physical endpoint number
+#define EP_BDT_IDX(ep, dir, odd) (((ep * 4) + (2 * dir) + (1 * odd)))
+
+#define SETUP_TOKEN 0x0D
+#define IN_TOKEN 0x09
+#define OUT_TOKEN 0x01
+#define TOK_PID(idx) ((bdt[idx].info >> 2) & 0x0F)
+
+// for each endpt: 8 bytes
+typedef struct BDT {
+ uint8_t info; // BD[0:7]
+ uint8_t dummy; // RSVD: BD[8:15]
+ uint16_t byte_count; // BD[16:32]
+ uint32_t address; // Addr
+} BDT;
+
+
+// there are:
+// * 16 bidirectionnal endpt -> 32 physical endpt
+// * as there are ODD and EVEN buffer -> 32*2 bdt
+__attribute__((__aligned__(512))) BDT bdt[NUMBER_OF_PHYSICAL_ENDPOINTS * 2];
+uint8_t * endpoint_buffer[(NUMBER_OF_PHYSICAL_ENDPOINTS - 2) * 2];
+uint8_t * endpoint_buffer_iso[2*2];
+
+static uint8_t set_addr = 0;
+static uint8_t addr = 0;
+
+static uint32_t Data1 = 0x55555555;
+
+static uint32_t frameNumber() {
+ return((USB0->FRMNUML | (USB0->FRMNUMH << 8)) & 0x07FF);
+}
+
+uint32_t USBHAL::endpointReadcore(uint8_t endpoint, uint8_t *buffer) {
+ return 0;
+}
+
+USBHAL::USBHAL(void) {
+ // Disable IRQ
+ NVIC_DisableIRQ(USB0_IRQn);
+
+#if defined(TARGET_K64F)
+ MPU->CESR=0;
+#endif
+ // fill in callback array
+ epCallback[0] = &USBHAL::EP1_OUT_callback;
+ epCallback[1] = &USBHAL::EP1_IN_callback;
+ epCallback[2] = &USBHAL::EP2_OUT_callback;
+ epCallback[3] = &USBHAL::EP2_IN_callback;
+ epCallback[4] = &USBHAL::EP3_OUT_callback;
+ epCallback[5] = &USBHAL::EP3_IN_callback;
+ epCallback[6] = &USBHAL::EP4_OUT_callback;
+ epCallback[7] = &USBHAL::EP4_IN_callback;
+ epCallback[8] = &USBHAL::EP5_OUT_callback;
+ epCallback[9] = &USBHAL::EP5_IN_callback;
+ epCallback[10] = &USBHAL::EP6_OUT_callback;
+ epCallback[11] = &USBHAL::EP6_IN_callback;
+ epCallback[12] = &USBHAL::EP7_OUT_callback;
+ epCallback[13] = &USBHAL::EP7_IN_callback;
+ epCallback[14] = &USBHAL::EP8_OUT_callback;
+ epCallback[15] = &USBHAL::EP8_IN_callback;
+ epCallback[16] = &USBHAL::EP9_OUT_callback;
+ epCallback[17] = &USBHAL::EP9_IN_callback;
+ epCallback[18] = &USBHAL::EP10_OUT_callback;
+ epCallback[19] = &USBHAL::EP10_IN_callback;
+ epCallback[20] = &USBHAL::EP11_OUT_callback;
+ epCallback[21] = &USBHAL::EP11_IN_callback;
+ epCallback[22] = &USBHAL::EP12_OUT_callback;
+ epCallback[23] = &USBHAL::EP12_IN_callback;
+ epCallback[24] = &USBHAL::EP13_OUT_callback;
+ epCallback[25] = &USBHAL::EP13_IN_callback;
+ epCallback[26] = &USBHAL::EP14_OUT_callback;
+ epCallback[27] = &USBHAL::EP14_IN_callback;
+ epCallback[28] = &USBHAL::EP15_OUT_callback;
+ epCallback[29] = &USBHAL::EP15_IN_callback;
+
+
+ // choose usb src as PLL
+ SIM->SOPT2 |= (SIM_SOPT2_USBSRC_MASK | SIM_SOPT2_PLLFLLSEL_MASK);
+
+ // enable OTG clock
+ SIM->SCGC4 |= SIM_SCGC4_USBOTG_MASK;
+
+ // Attach IRQ
+ instance = this;
+ NVIC_SetVector(USB0_IRQn, (uint32_t)&_usbisr);
+ NVIC_EnableIRQ(USB0_IRQn);
+
+ // USB Module Configuration
+ // Reset USB Module
+ USB0->USBTRC0 |= USB_USBTRC0_USBRESET_MASK;
+ while(USB0->USBTRC0 & USB_USBTRC0_USBRESET_MASK);
+
+ // Set BDT Base Register
+ USB0->BDTPAGE1 = (uint8_t)((uint32_t)bdt>>8);
+ USB0->BDTPAGE2 = (uint8_t)((uint32_t)bdt>>16);
+ USB0->BDTPAGE3 = (uint8_t)((uint32_t)bdt>>24);
+
+ // Clear interrupt flag
+ USB0->ISTAT = 0xff;
+
+ // USB Interrupt Enablers
+ USB0->INTEN |= USB_INTEN_TOKDNEEN_MASK |
+ USB_INTEN_SOFTOKEN_MASK |
+ USB_INTEN_ERROREN_MASK |
+ USB_INTEN_USBRSTEN_MASK;
+
+ // Disable weak pull downs
+ USB0->USBCTRL &= ~(USB_USBCTRL_PDE_MASK | USB_USBCTRL_SUSP_MASK);
+
+ USB0->USBTRC0 |= 0x40;
+}
+
+USBHAL::~USBHAL(void) { }
+
+void USBHAL::connect(void) {
+ // enable USB
+ USB0->CTL |= USB_CTL_USBENSOFEN_MASK;
+ // Pull up enable
+ USB0->CONTROL |= USB_CONTROL_DPPULLUPNONOTG_MASK;
+}
+
+void USBHAL::disconnect(void) {
+ // disable USB
+ USB0->CTL &= ~USB_CTL_USBENSOFEN_MASK;
+ // Pull up disable
+ USB0->CONTROL &= ~USB_CONTROL_DPPULLUPNONOTG_MASK;
+
+ //Free buffers if required:
+ for (int i = 0; i<(NUMBER_OF_PHYSICAL_ENDPOINTS - 2) * 2; i++) {
+ free(endpoint_buffer[i]);
+ endpoint_buffer[i] = NULL;
+ }
+ free(endpoint_buffer_iso[2]);
+ endpoint_buffer_iso[2] = NULL;
+ free(endpoint_buffer_iso[0]);
+ endpoint_buffer_iso[0] = NULL;
+}
+
+void USBHAL::configureDevice(void) {
+ // not needed
+}
+
+void USBHAL::unconfigureDevice(void) {
+ // not needed
+}
+
+void USBHAL::setAddress(uint8_t address) {
+ // we don't set the address now otherwise the usb controller does not ack
+ // we set a flag instead
+ // see usbisr when an IN token is received
+ set_addr = 1;
+ addr = address;
+}
+
+bool USBHAL::realiseEndpoint(uint8_t endpoint, uint32_t maxPacket, uint32_t flags) {
+ uint32_t handshake_flag = 0;
+ uint8_t * buf;
+
+ if (endpoint > NUMBER_OF_PHYSICAL_ENDPOINTS - 1) {
+ return false;
+ }
+
+ uint32_t log_endpoint = PHY_TO_LOG(endpoint);
+
+ if ((flags & ISOCHRONOUS) == 0) {
+ handshake_flag = USB_ENDPT_EPHSHK_MASK;
+ if (IN_EP(endpoint)) {
+ if (endpoint_buffer[EP_BDT_IDX(log_endpoint, TX, ODD)] == NULL)
+ endpoint_buffer[EP_BDT_IDX(log_endpoint, TX, ODD)] = (uint8_t *) malloc (64*2);
+ buf = &endpoint_buffer[EP_BDT_IDX(log_endpoint, TX, ODD)][0];
+ } else {
+ if (endpoint_buffer[EP_BDT_IDX(log_endpoint, RX, ODD)] == NULL)
+ endpoint_buffer[EP_BDT_IDX(log_endpoint, RX, ODD)] = (uint8_t *) malloc (64*2);
+ buf = &endpoint_buffer[EP_BDT_IDX(log_endpoint, RX, ODD)][0];
+ }
+ } else {
+ if (IN_EP(endpoint)) {
+ if (endpoint_buffer_iso[2] == NULL)
+ endpoint_buffer_iso[2] = (uint8_t *) malloc (1023*2);
+ buf = &endpoint_buffer_iso[2][0];
+ } else {
+ if (endpoint_buffer_iso[0] == NULL)
+ endpoint_buffer_iso[0] = (uint8_t *) malloc (1023*2);
+ buf = &endpoint_buffer_iso[0][0];
+ }
+ }
+
+ // IN endpt -> device to host (TX)
+ if (IN_EP(endpoint)) {
+ USB0->ENDPOINT[log_endpoint].ENDPT |= handshake_flag | // ep handshaking (not if iso endpoint)
+ USB_ENDPT_EPTXEN_MASK; // en TX (IN) tran
+ bdt[EP_BDT_IDX(log_endpoint, TX, ODD )].address = (uint32_t) buf;
+ bdt[EP_BDT_IDX(log_endpoint, TX, EVEN)].address = 0;
+ }
+ // OUT endpt -> host to device (RX)
+ else {
+ USB0->ENDPOINT[log_endpoint].ENDPT |= handshake_flag | // ep handshaking (not if iso endpoint)
+ USB_ENDPT_EPRXEN_MASK; // en RX (OUT) tran.
+ bdt[EP_BDT_IDX(log_endpoint, RX, ODD )].byte_count = maxPacket;
+ bdt[EP_BDT_IDX(log_endpoint, RX, ODD )].address = (uint32_t) buf;
+ bdt[EP_BDT_IDX(log_endpoint, RX, ODD )].info = BD_OWN_MASK | BD_DTS_MASK;
+ bdt[EP_BDT_IDX(log_endpoint, RX, EVEN)].info = 0;
+ }
+
+ Data1 |= (1 << endpoint);
+
+ return true;
+}
+
+// read setup packet
+void USBHAL::EP0setup(uint8_t *buffer) {
+ uint32_t sz;
+ endpointReadResult(EP0OUT, buffer, &sz);
+}
+
+void USBHAL::EP0readStage(void) {
+ Data1 &= ~1UL; // set DATA0
+ bdt[0].info = (BD_DTS_MASK | BD_OWN_MASK);
+}
+
+void USBHAL::EP0read(void) {
+ uint32_t idx = EP_BDT_IDX(PHY_TO_LOG(EP0OUT), RX, 0);
+ bdt[idx].byte_count = MAX_PACKET_SIZE_EP0;
+}
+
+uint32_t USBHAL::EP0getReadResult(uint8_t *buffer) {
+ uint32_t sz;
+ endpointReadResult(EP0OUT, buffer, &sz);
+ return sz;
+}
+
+void USBHAL::EP0write(uint8_t *buffer, uint32_t size) {
+ endpointWrite(EP0IN, buffer, size);
+}
+
+void USBHAL::EP0getWriteResult(void) {
+}
+
+void USBHAL::EP0stall(void) {
+ stallEndpoint(EP0OUT);
+}
+
+EP_STATUS USBHAL::endpointRead(uint8_t endpoint, uint32_t maximumSize) {
+ endpoint = PHY_TO_LOG(endpoint);
+ uint32_t idx = EP_BDT_IDX(endpoint, RX, 0);
+ bdt[idx].byte_count = maximumSize;
+ return EP_PENDING;
+}
+
+EP_STATUS USBHAL::endpointReadResult(uint8_t endpoint, uint8_t * buffer, uint32_t *bytesRead) {
+ uint32_t n, sz, idx, setup = 0;
+ uint8_t not_iso;
+ uint8_t * ep_buf;
+
+ uint32_t log_endpoint = PHY_TO_LOG(endpoint);
+
+ if (endpoint > NUMBER_OF_PHYSICAL_ENDPOINTS - 1) {
+ return EP_INVALID;
+ }
+
+ // if read on a IN endpoint -> error
+ if (IN_EP(endpoint)) {
+ return EP_INVALID;
+ }
+
+ idx = EP_BDT_IDX(log_endpoint, RX, 0);
+ sz = bdt[idx].byte_count;
+ not_iso = USB0->ENDPOINT[log_endpoint].ENDPT & USB_ENDPT_EPHSHK_MASK;
+
+ //for isochronous endpoint, we don't wait an interrupt
+ if ((log_endpoint != 0) && not_iso && !(epComplete & EP(endpoint))) {
+ return EP_PENDING;
+ }
+
+ if ((log_endpoint == 0) && (TOK_PID(idx) == SETUP_TOKEN)) {
+ setup = 1;
+ }
+
+ // non iso endpoint
+ if (not_iso) {
+ ep_buf = endpoint_buffer[idx];
+ } else {
+ ep_buf = endpoint_buffer_iso[0];
+ }
+
+ for (n = 0; n < sz; n++) {
+ buffer[n] = ep_buf[n];
+ }
+
+ if (((Data1 >> endpoint) & 1) == ((bdt[idx].info >> 6) & 1)) {
+ if (setup && (buffer[6] == 0)) // if no setup data stage,
+ Data1 &= ~1UL; // set DATA0
+ else
+ Data1 ^= (1 << endpoint);
+ }
+
+ if (((Data1 >> endpoint) & 1)) {
+ bdt[idx].info = BD_DTS_MASK | BD_DATA01_MASK | BD_OWN_MASK;
+ }
+ else {
+ bdt[idx].info = BD_DTS_MASK | BD_OWN_MASK;
+ }
+
+ USB0->CTL &= ~USB_CTL_TXSUSPENDTOKENBUSY_MASK;
+ *bytesRead = sz;
+
+ epComplete &= ~EP(endpoint);
+ return EP_COMPLETED;
+}
+
+EP_STATUS USBHAL::endpointWrite(uint8_t endpoint, uint8_t *data, uint32_t size) {
+ uint32_t idx, n;
+ uint8_t * ep_buf;
+
+ if (endpoint > NUMBER_OF_PHYSICAL_ENDPOINTS - 1) {
+ return EP_INVALID;
+ }
+
+ // if write on a OUT endpoint -> error
+ if (OUT_EP(endpoint)) {
+ return EP_INVALID;
+ }
+
+ idx = EP_BDT_IDX(PHY_TO_LOG(endpoint), TX, 0);
+ bdt[idx].byte_count = size;
+
+
+ // non iso endpoint
+ if (USB0->ENDPOINT[PHY_TO_LOG(endpoint)].ENDPT & USB_ENDPT_EPHSHK_MASK) {
+ ep_buf = endpoint_buffer[idx];
+ } else {
+ ep_buf = endpoint_buffer_iso[2];
+ }
+
+ for (n = 0; n < size; n++) {
+ ep_buf[n] = data[n];
+ }
+
+ if ((Data1 >> endpoint) & 1) {
+ bdt[idx].info = BD_OWN_MASK | BD_DTS_MASK;
+ } else {
+ bdt[idx].info = BD_OWN_MASK | BD_DTS_MASK | BD_DATA01_MASK;
+ }
+
+ Data1 ^= (1 << endpoint);
+
+ return EP_PENDING;
+}
+
+EP_STATUS USBHAL::endpointWriteResult(uint8_t endpoint) {
+ if (epComplete & EP(endpoint)) {
+ epComplete &= ~EP(endpoint);
+ return EP_COMPLETED;
+ }
+
+ return EP_PENDING;
+}
+
+void USBHAL::stallEndpoint(uint8_t endpoint) {
+ USB0->ENDPOINT[PHY_TO_LOG(endpoint)].ENDPT |= USB_ENDPT_EPSTALL_MASK;
+}
+
+void USBHAL::unstallEndpoint(uint8_t endpoint) {
+ USB0->ENDPOINT[PHY_TO_LOG(endpoint)].ENDPT &= ~USB_ENDPT_EPSTALL_MASK;
+}
+
+bool USBHAL::getEndpointStallState(uint8_t endpoint) {
+ uint8_t stall = (USB0->ENDPOINT[PHY_TO_LOG(endpoint)].ENDPT & USB_ENDPT_EPSTALL_MASK);
+ return (stall) ? true : false;
+}
+
+void USBHAL::remoteWakeup(void) {
+ // [TODO]
+}
+
+
+void USBHAL::_usbisr(void) {
+ instance->usbisr();
+}
+
+
+void USBHAL::usbisr(void) {
+ uint8_t i;
+ uint8_t istat = USB0->ISTAT;
+
+ // reset interrupt
+ if (istat & USB_ISTAT_USBRST_MASK) {
+ // disable all endpt
+ for(i = 0; i < 16; i++) {
+ USB0->ENDPOINT[i].ENDPT = 0x00;
+ }
+
+ // enable control endpoint
+ realiseEndpoint(EP0OUT, MAX_PACKET_SIZE_EP0, 0);
+ realiseEndpoint(EP0IN, MAX_PACKET_SIZE_EP0, 0);
+
+ Data1 = 0x55555555;
+ USB0->CTL |= USB_CTL_ODDRST_MASK;
+
+ USB0->ISTAT = 0xFF; // clear all interrupt status flags
+ USB0->ERRSTAT = 0xFF; // clear all error flags
+ USB0->ERREN = 0xFF; // enable error interrupt sources
+ USB0->ADDR = 0x00; // set default address
+
+ return;
+ }
+
+ // resume interrupt
+ if (istat & USB_ISTAT_RESUME_MASK) {
+ USB0->ISTAT = USB_ISTAT_RESUME_MASK;
+ }
+
+ // SOF interrupt
+ if (istat & USB_ISTAT_SOFTOK_MASK) {
+ USB0->ISTAT = USB_ISTAT_SOFTOK_MASK;
+ // SOF event, read frame number
+ SOF(frameNumber());
+ }
+
+ // stall interrupt
+ if (istat & 1<<7) {
+ if (USB0->ENDPOINT[0].ENDPT & USB_ENDPT_EPSTALL_MASK)
+ USB0->ENDPOINT[0].ENDPT &= ~USB_ENDPT_EPSTALL_MASK;
+ USB0->ISTAT |= USB_ISTAT_STALL_MASK;
+ }
+
+ // token interrupt
+ if (istat & 1<<3) {
+ uint32_t num = (USB0->STAT >> 4) & 0x0F;
+ uint32_t dir = (USB0->STAT >> 3) & 0x01;
+ uint32_t ev_odd = (USB0->STAT >> 2) & 0x01;
+
+ // setup packet
+ if ((num == 0) && (TOK_PID((EP_BDT_IDX(num, dir, ev_odd))) == SETUP_TOKEN)) {
+ Data1 &= ~0x02;
+ bdt[EP_BDT_IDX(0, TX, EVEN)].info &= ~BD_OWN_MASK;
+ bdt[EP_BDT_IDX(0, TX, ODD)].info &= ~BD_OWN_MASK;
+
+ // EP0 SETUP event (SETUP data received)
+ EP0setupCallback();
+
+ } else {
+ // OUT packet
+ if (TOK_PID((EP_BDT_IDX(num, dir, ev_odd))) == OUT_TOKEN) {
+ if (num == 0)
+ EP0out();
+ else {
+ epComplete |= (1 << EP(num));
+ if ((instance->*(epCallback[EP(num) - 2]))()) {
+ epComplete &= ~(1 << EP(num));
+ }
+ }
+ }
+
+ // IN packet
+ if (TOK_PID((EP_BDT_IDX(num, dir, ev_odd))) == IN_TOKEN) {
+ if (num == 0) {
+ EP0in();
+ if (set_addr == 1) {
+ USB0->ADDR = addr & 0x7F;
+ set_addr = 0;
+ }
+ }
+ else {
+ epComplete |= (1 << (EP(num) + 1));
+ if ((instance->*(epCallback[EP(num) + 1 - 2]))()) {
+ epComplete &= ~(1 << (EP(num) + 1));
+ }
+ }
+ }
+ }
+
+ USB0->ISTAT = USB_ISTAT_TOKDNE_MASK;
+ }
+
+ // sleep interrupt
+ if (istat & 1<<4) {
+ USB0->ISTAT |= USB_ISTAT_SLEEP_MASK;
+ }
+
+ // error interrupt
+ if (istat & USB_ISTAT_ERROR_MASK) {
+ USB0->ERRSTAT = 0xFF;
+ USB0->ISTAT |= USB_ISTAT_ERROR_MASK;
+ }
+}
+
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/USBDevice/USBDevice/USBHAL_LPC11U.cpp Fri Aug 29 08:33:17 2014 +0000
@@ -0,0 +1,695 @@
+/* Copyright (c) 2010-2011 mbed.org, MIT License
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy of this software
+* and associated documentation files (the "Software"), to deal in the Software without
+* restriction, including without limitation the rights to use, copy, modify, merge, publish,
+* distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the
+* Software is furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in all copies or
+* substantial portions of the Software.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING
+* BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
+* DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+*/
+
+#if defined(TARGET_LPC11U24) || defined(TARGET_LPC11U35_401) || defined(TARGET_LPC1347) || defined(TARGET_LPC11U35_501) || defined(TARGET_LPC11U68)
+
+#if defined(TARGET_LPC1347)
+#define USB_IRQ USB_IRQ_IRQn
+#elif defined(TARGET_LPC11U24) || defined(TARGET_LPC11U35_401) || defined(TARGET_LPC11U35_501) || defined(TARGET_LPC11U68)
+#define USB_IRQ USB_IRQn
+#endif
+
+#include "USBHAL.h"
+
+USBHAL * USBHAL::instance;
+
+// Valid physical endpoint numbers are 0 to (NUMBER_OF_PHYSICAL_ENDPOINTS-1)
+#define LAST_PHYSICAL_ENDPOINT (NUMBER_OF_PHYSICAL_ENDPOINTS-1)
+
+// Convert physical endpoint number to register bit
+#define EP(endpoint) (1UL<<endpoint)
+
+// Convert physical to logical
+#define PHY_TO_LOG(endpoint) ((endpoint)>>1)
+
+// Get endpoint direction
+#define IN_EP(endpoint) ((endpoint) & 1U ? true : false)
+#define OUT_EP(endpoint) ((endpoint) & 1U ? false : true)
+
+// USB RAM
+#define USB_RAM_START (0x20004000)
+#define USB_RAM_SIZE (0x00000800)
+
+// SYSAHBCLKCTRL
+#define CLK_USB (1UL<<14)
+#define CLK_USBRAM (1UL<<27)
+
+// USB Information register
+#define FRAME_NR(a) ((a) & 0x7ff) // Frame number
+
+// USB Device Command/Status register
+#define DEV_ADDR_MASK (0x7f) // Device address
+#define DEV_ADDR(a) ((a) & DEV_ADDR_MASK)
+#define DEV_EN (1UL<<7) // Device enable
+#define SETUP (1UL<<8) // SETUP token received
+#define PLL_ON (1UL<<9) // PLL enabled in suspend
+#define DCON (1UL<<16) // Device status - connect
+#define DSUS (1UL<<17) // Device status - suspend
+#define DCON_C (1UL<<24) // Connect change
+#define DSUS_C (1UL<<25) // Suspend change
+#define DRES_C (1UL<<26) // Reset change
+#define VBUSDEBOUNCED (1UL<<28) // Vbus detected
+
+// Endpoint Command/Status list
+#define CMDSTS_A (1UL<<31) // Active
+#define CMDSTS_D (1UL<<30) // Disable
+#define CMDSTS_S (1UL<<29) // Stall
+#define CMDSTS_TR (1UL<<28) // Toggle Reset
+#define CMDSTS_RF (1UL<<27) // Rate Feedback mode
+#define CMDSTS_TV (1UL<<27) // Toggle Value
+#define CMDSTS_T (1UL<<26) // Endpoint Type
+#define CMDSTS_NBYTES(n) (((n)&0x3ff)<<16) // Number of bytes
+#define CMDSTS_ADDRESS_OFFSET(a) (((a)>>6)&0xffff) // Buffer start address
+
+#define BYTES_REMAINING(s) (((s)>>16)&0x3ff) // Bytes remaining after transfer
+
+// USB Non-endpoint interrupt sources
+#define FRAME_INT (1UL<<30)
+#define DEV_INT (1UL<<31)
+
+static volatile int epComplete = 0;
+
+// One entry for a double-buffered logical endpoint in the endpoint
+// command/status list. Endpoint 0 is single buffered, out[1] is used
+// for the SETUP packet and in[1] is not used
+typedef struct {
+ uint32_t out[2];
+ uint32_t in[2];
+} PACKED EP_COMMAND_STATUS;
+
+typedef struct {
+ uint8_t out[MAX_PACKET_SIZE_EP0];
+ uint8_t in[MAX_PACKET_SIZE_EP0];
+ uint8_t setup[SETUP_PACKET_SIZE];
+} PACKED CONTROL_TRANSFER;
+
+typedef struct {
+ uint32_t maxPacket;
+ uint32_t buffer[2];
+ uint32_t options;
+} PACKED EP_STATE;
+
+static volatile EP_STATE endpointState[NUMBER_OF_PHYSICAL_ENDPOINTS];
+
+// Pointer to the endpoint command/status list
+static EP_COMMAND_STATUS *ep = NULL;
+
+// Pointer to endpoint 0 data (IN/OUT and SETUP)
+static CONTROL_TRANSFER *ct = NULL;
+
+// Shadow DEVCMDSTAT register to avoid accidentally clearing flags or
+// initiating a remote wakeup event.
+static volatile uint32_t devCmdStat;
+
+// Pointers used to allocate USB RAM
+static uint32_t usbRamPtr = USB_RAM_START;
+static uint32_t epRamPtr = 0; // Buffers for endpoints > 0 start here
+
+#define ROUND_UP_TO_MULTIPLE(x, m) ((((x)+((m)-1))/(m))*(m))
+
+void USBMemCopy(uint8_t *dst, uint8_t *src, uint32_t size);
+void USBMemCopy(uint8_t *dst, uint8_t *src, uint32_t size) {
+ if (size > 0) {
+ do {
+ *dst++ = *src++;
+ } while (--size > 0);
+ }
+}
+
+
+USBHAL::USBHAL(void) {
+ NVIC_DisableIRQ(USB_IRQ);
+
+ // fill in callback array
+ epCallback[0] = &USBHAL::EP1_OUT_callback;
+ epCallback[1] = &USBHAL::EP1_IN_callback;
+ epCallback[2] = &USBHAL::EP2_OUT_callback;
+ epCallback[3] = &USBHAL::EP2_IN_callback;
+ epCallback[4] = &USBHAL::EP3_OUT_callback;
+ epCallback[5] = &USBHAL::EP3_IN_callback;
+ epCallback[6] = &USBHAL::EP4_OUT_callback;
+ epCallback[7] = &USBHAL::EP4_IN_callback;
+
+ #if defined(TARGET_LPC11U35_401) || defined(TARGET_LPC11U35_501)
+ // USB_VBUS input with pull-down
+ LPC_IOCON->PIO0_3 = 0x00000009;
+ #endif
+
+ // nUSB_CONNECT output
+ LPC_IOCON->PIO0_6 = 0x00000001;
+
+ // Enable clocks (USB registers, USB RAM)
+ LPC_SYSCON->SYSAHBCLKCTRL |= CLK_USB | CLK_USBRAM;
+
+ // Ensure device disconnected (DCON not set)
+ LPC_USB->DEVCMDSTAT = 0;
+
+ // to ensure that the USB host sees the device as
+ // disconnected if the target CPU is reset.
+ wait(0.3);
+
+ // Reserve space in USB RAM for endpoint command/status list
+ // Must be 256 byte aligned
+ usbRamPtr = ROUND_UP_TO_MULTIPLE(usbRamPtr, 256);
+ ep = (EP_COMMAND_STATUS *)usbRamPtr;
+ usbRamPtr += (sizeof(EP_COMMAND_STATUS) * NUMBER_OF_LOGICAL_ENDPOINTS);
+ LPC_USB->EPLISTSTART = (uint32_t)(ep) & 0xffffff00;
+
+ // Reserve space in USB RAM for Endpoint 0
+ // Must be 64 byte aligned
+ usbRamPtr = ROUND_UP_TO_MULTIPLE(usbRamPtr, 64);
+ ct = (CONTROL_TRANSFER *)usbRamPtr;
+ usbRamPtr += sizeof(CONTROL_TRANSFER);
+ LPC_USB->DATABUFSTART =(uint32_t)(ct) & 0xffc00000;
+
+ // Setup command/status list for EP0
+ ep[0].out[0] = 0;
+ ep[0].in[0] = 0;
+ ep[0].out[1] = CMDSTS_ADDRESS_OFFSET((uint32_t)ct->setup);
+
+ // Route all interrupts to IRQ, some can be routed to
+ // USB_FIQ if you wish.
+ LPC_USB->INTROUTING = 0;
+
+ // Set device address 0, enable USB device, no remote wakeup
+ devCmdStat = DEV_ADDR(0) | DEV_EN | DSUS;
+ LPC_USB->DEVCMDSTAT = devCmdStat;
+
+ // Enable interrupts for device events and EP0
+ LPC_USB->INTEN = DEV_INT | EP(EP0IN) | EP(EP0OUT) | FRAME_INT;
+ instance = this;
+
+ //attach IRQ handler and enable interrupts
+ NVIC_SetVector(USB_IRQ, (uint32_t)&_usbisr);
+}
+
+USBHAL::~USBHAL(void) {
+ // Ensure device disconnected (DCON not set)
+ LPC_USB->DEVCMDSTAT = 0;
+ // Disable USB interrupts
+ NVIC_DisableIRQ(USB_IRQ);
+}
+
+void USBHAL::connect(void) {
+ NVIC_EnableIRQ(USB_IRQ);
+ devCmdStat |= DCON;
+ LPC_USB->DEVCMDSTAT = devCmdStat;
+}
+
+void USBHAL::disconnect(void) {
+ NVIC_DisableIRQ(USB_IRQ);
+ devCmdStat &= ~DCON;
+ LPC_USB->DEVCMDSTAT = devCmdStat;
+}
+
+void USBHAL::configureDevice(void) {
+ // Not required
+}
+
+void USBHAL::unconfigureDevice(void) {
+ // Not required
+}
+
+void USBHAL::EP0setup(uint8_t *buffer) {
+ // Copy setup packet data
+ USBMemCopy(buffer, ct->setup, SETUP_PACKET_SIZE);
+}
+
+void USBHAL::EP0read(void) {
+ // Start an endpoint 0 read
+
+ // The USB ISR will call USBDevice_EP0out() when a packet has been read,
+ // the USBDevice layer then calls USBBusInterface_EP0getReadResult() to
+ // read the data.
+
+ ep[0].out[0] = CMDSTS_A |CMDSTS_NBYTES(MAX_PACKET_SIZE_EP0) \
+ | CMDSTS_ADDRESS_OFFSET((uint32_t)ct->out);
+}
+
+uint32_t USBHAL::EP0getReadResult(uint8_t *buffer) {
+ // Complete an endpoint 0 read
+ uint32_t bytesRead;
+
+ // Find how many bytes were read
+ bytesRead = MAX_PACKET_SIZE_EP0 - BYTES_REMAINING(ep[0].out[0]);
+
+ // Copy data
+ USBMemCopy(buffer, ct->out, bytesRead);
+ return bytesRead;
+}
+
+
+void USBHAL::EP0readStage(void) {
+ // Not required
+}
+
+void USBHAL::EP0write(uint8_t *buffer, uint32_t size) {
+ // Start and endpoint 0 write
+
+ // The USB ISR will call USBDevice_EP0in() when the data has
+ // been written, the USBDevice layer then calls
+ // USBBusInterface_EP0getWriteResult() to complete the transaction.
+
+ // Copy data
+ USBMemCopy(ct->in, buffer, size);
+
+ // Start transfer
+ ep[0].in[0] = CMDSTS_A | CMDSTS_NBYTES(size) \
+ | CMDSTS_ADDRESS_OFFSET((uint32_t)ct->in);
+}
+
+
+EP_STATUS USBHAL::endpointRead(uint8_t endpoint, uint32_t maximumSize) {
+ uint8_t bf = 0;
+ uint32_t flags = 0;
+
+ //check which buffer must be filled
+ if (LPC_USB->EPBUFCFG & EP(endpoint)) {
+ // Double buffered
+ if (LPC_USB->EPINUSE & EP(endpoint)) {
+ bf = 1;
+ } else {
+ bf = 0;
+ }
+ }
+
+ // if isochronous endpoint, T = 1
+ if(endpointState[endpoint].options & ISOCHRONOUS)
+ {
+ flags |= CMDSTS_T;
+ }
+
+ //Active the endpoint for reading
+ ep[PHY_TO_LOG(endpoint)].out[bf] = CMDSTS_A | CMDSTS_NBYTES(maximumSize) \
+ | CMDSTS_ADDRESS_OFFSET((uint32_t)ct->out) | flags;
+ return EP_PENDING;
+}
+
+EP_STATUS USBHAL::endpointReadResult(uint8_t endpoint, uint8_t *data, uint32_t *bytesRead) {
+
+ uint8_t bf = 0;
+
+ if (!(epComplete & EP(endpoint)))
+ return EP_PENDING;
+ else {
+ epComplete &= ~EP(endpoint);
+
+ //check which buffer has been filled
+ if (LPC_USB->EPBUFCFG & EP(endpoint)) {
+ // Double buffered (here we read the previous buffer which was used)
+ if (LPC_USB->EPINUSE & EP(endpoint)) {
+ bf = 0;
+ } else {
+ bf = 1;
+ }
+ }
+
+ // Find how many bytes were read
+ *bytesRead = (uint32_t) (endpointState[endpoint].maxPacket - BYTES_REMAINING(ep[PHY_TO_LOG(endpoint)].out[bf]));
+
+ // Copy data
+ USBMemCopy(data, ct->out, *bytesRead);
+ return EP_COMPLETED;
+ }
+}
+
+void USBHAL::EP0getWriteResult(void) {
+ // Not required
+}
+
+void USBHAL::EP0stall(void) {
+ ep[0].in[0] = CMDSTS_S;
+ ep[0].out[0] = CMDSTS_S;
+}
+
+void USBHAL::setAddress(uint8_t address) {
+ devCmdStat &= ~DEV_ADDR_MASK;
+ devCmdStat |= DEV_ADDR(address);
+ LPC_USB->DEVCMDSTAT = devCmdStat;
+}
+
+EP_STATUS USBHAL::endpointWrite(uint8_t endpoint, uint8_t *data, uint32_t size) {
+ uint32_t flags = 0;
+ uint32_t bf;
+
+ // Validate parameters
+ if (data == NULL) {
+ return EP_INVALID;
+ }
+
+ if (endpoint > LAST_PHYSICAL_ENDPOINT) {
+ return EP_INVALID;
+ }
+
+ if ((endpoint==EP0IN) || (endpoint==EP0OUT)) {
+ return EP_INVALID;
+ }
+
+ if (size > endpointState[endpoint].maxPacket) {
+ return EP_INVALID;
+ }
+
+ if (LPC_USB->EPBUFCFG & EP(endpoint)) {
+ // Double buffered
+ if (LPC_USB->EPINUSE & EP(endpoint)) {
+ bf = 1;
+ } else {
+ bf = 0;
+ }
+ } else {
+ // Single buffered
+ bf = 0;
+ }
+
+ // Check if already active
+ if (ep[PHY_TO_LOG(endpoint)].in[bf] & CMDSTS_A) {
+ return EP_INVALID;
+ }
+
+ // Check if stalled
+ if (ep[PHY_TO_LOG(endpoint)].in[bf] & CMDSTS_S) {
+ return EP_STALLED;
+ }
+
+ // Copy data to USB RAM
+ USBMemCopy((uint8_t *)endpointState[endpoint].buffer[bf], data, size);
+
+ // Add options
+ if (endpointState[endpoint].options & RATE_FEEDBACK_MODE) {
+ flags |= CMDSTS_RF;
+ }
+
+ if (endpointState[endpoint].options & ISOCHRONOUS) {
+ flags |= CMDSTS_T;
+ }
+
+ // Add transfer
+ ep[PHY_TO_LOG(endpoint)].in[bf] = CMDSTS_ADDRESS_OFFSET( \
+ endpointState[endpoint].buffer[bf]) \
+ | CMDSTS_NBYTES(size) | CMDSTS_A | flags;
+
+ return EP_PENDING;
+}
+
+EP_STATUS USBHAL::endpointWriteResult(uint8_t endpoint) {
+ uint32_t bf;
+
+ // Validate parameters
+ if (endpoint > LAST_PHYSICAL_ENDPOINT) {
+ return EP_INVALID;
+ }
+
+ if (OUT_EP(endpoint)) {
+ return EP_INVALID;
+ }
+
+ if (LPC_USB->EPBUFCFG & EP(endpoint)) {
+ // Double buffered // TODO: FIX THIS
+ if (LPC_USB->EPINUSE & EP(endpoint)) {
+ bf = 1;
+ } else {
+ bf = 0;
+ }
+ } else {
+ // Single buffered
+ bf = 0;
+ }
+
+ // Check if endpoint still active
+ if (ep[PHY_TO_LOG(endpoint)].in[bf] & CMDSTS_A) {
+ return EP_PENDING;
+ }
+
+ // Check if stalled
+ if (ep[PHY_TO_LOG(endpoint)].in[bf] & CMDSTS_S) {
+ return EP_STALLED;
+ }
+
+ return EP_COMPLETED;
+}
+
+void USBHAL::stallEndpoint(uint8_t endpoint) {
+
+ // FIX: should this clear active bit?
+ if (IN_EP(endpoint)) {
+ ep[PHY_TO_LOG(endpoint)].in[0] |= CMDSTS_S;
+ ep[PHY_TO_LOG(endpoint)].in[1] |= CMDSTS_S;
+ } else {
+ ep[PHY_TO_LOG(endpoint)].out[0] |= CMDSTS_S;
+ ep[PHY_TO_LOG(endpoint)].out[1] |= CMDSTS_S;
+ }
+}
+
+void USBHAL::unstallEndpoint(uint8_t endpoint) {
+ if (LPC_USB->EPBUFCFG & EP(endpoint)) {
+ // Double buffered
+ if (IN_EP(endpoint)) {
+ ep[PHY_TO_LOG(endpoint)].in[0] = 0; // S = 0
+ ep[PHY_TO_LOG(endpoint)].in[1] = 0; // S = 0
+
+ if (LPC_USB->EPINUSE & EP(endpoint)) {
+ ep[PHY_TO_LOG(endpoint)].in[1] = CMDSTS_TR; // S = 0, TR = 1, TV = 0
+ } else {
+ ep[PHY_TO_LOG(endpoint)].in[0] = CMDSTS_TR; // S = 0, TR = 1, TV = 0
+ }
+ } else {
+ ep[PHY_TO_LOG(endpoint)].out[0] = 0; // S = 0
+ ep[PHY_TO_LOG(endpoint)].out[1] = 0; // S = 0
+
+ if (LPC_USB->EPINUSE & EP(endpoint)) {
+ ep[PHY_TO_LOG(endpoint)].out[1] = CMDSTS_TR; // S = 0, TR = 1, TV = 0
+ } else {
+ ep[PHY_TO_LOG(endpoint)].out[0] = CMDSTS_TR; // S = 0, TR = 1, TV = 0
+ }
+ }
+ } else {
+ // Single buffered
+ if (IN_EP(endpoint)) {
+ ep[PHY_TO_LOG(endpoint)].in[0] = CMDSTS_TR; // S = 0, TR = 1, TV = 0
+ } else {
+ ep[PHY_TO_LOG(endpoint)].out[0] = CMDSTS_TR; // S = 0, TR = 1, TV = 0
+ }
+ }
+}
+
+bool USBHAL::getEndpointStallState(unsigned char endpoint) {
+ if (IN_EP(endpoint)) {
+ if (LPC_USB->EPINUSE & EP(endpoint)) {
+ if (ep[PHY_TO_LOG(endpoint)].in[1] & CMDSTS_S) {
+ return true;
+ }
+ } else {
+ if (ep[PHY_TO_LOG(endpoint)].in[0] & CMDSTS_S) {
+ return true;
+ }
+ }
+ } else {
+ if (LPC_USB->EPINUSE & EP(endpoint)) {
+ if (ep[PHY_TO_LOG(endpoint)].out[1] & CMDSTS_S) {
+ return true;
+ }
+ } else {
+ if (ep[PHY_TO_LOG(endpoint)].out[0] & CMDSTS_S) {
+ return true;
+ }
+ }
+ }
+
+ return false;
+}
+
+bool USBHAL::realiseEndpoint(uint8_t endpoint, uint32_t maxPacket, uint32_t options) {
+ uint32_t tmpEpRamPtr;
+
+ if (endpoint > LAST_PHYSICAL_ENDPOINT) {
+ return false;
+ }
+
+ // Not applicable to the control endpoints
+ if ((endpoint==EP0IN) || (endpoint==EP0OUT)) {
+ return false;
+ }
+
+ // Allocate buffers in USB RAM
+ tmpEpRamPtr = epRamPtr;
+
+ // Must be 64 byte aligned
+ tmpEpRamPtr = ROUND_UP_TO_MULTIPLE(tmpEpRamPtr, 64);
+
+ if ((tmpEpRamPtr + maxPacket) > (USB_RAM_START + USB_RAM_SIZE)) {
+ // Out of memory
+ return false;
+ }
+
+ // Allocate first buffer
+ endpointState[endpoint].buffer[0] = tmpEpRamPtr;
+ tmpEpRamPtr += maxPacket;
+
+ if (!(options & SINGLE_BUFFERED)) {
+ // Must be 64 byte aligned
+ tmpEpRamPtr = ROUND_UP_TO_MULTIPLE(tmpEpRamPtr, 64);
+
+ if ((tmpEpRamPtr + maxPacket) > (USB_RAM_START + USB_RAM_SIZE)) {
+ // Out of memory
+ return false;
+ }
+
+ // Allocate second buffer
+ endpointState[endpoint].buffer[1] = tmpEpRamPtr;
+ tmpEpRamPtr += maxPacket;
+ }
+
+ // Commit to this USB RAM allocation
+ epRamPtr = tmpEpRamPtr;
+
+ // Remaining endpoint state values
+ endpointState[endpoint].maxPacket = maxPacket;
+ endpointState[endpoint].options = options;
+
+ // Enable double buffering if required
+ if (options & SINGLE_BUFFERED) {
+ LPC_USB->EPBUFCFG &= ~EP(endpoint);
+ } else {
+ // Double buffered
+ LPC_USB->EPBUFCFG |= EP(endpoint);
+ }
+
+ // Enable interrupt
+ LPC_USB->INTEN |= EP(endpoint);
+
+ // Enable endpoint
+ unstallEndpoint(endpoint);
+ return true;
+}
+
+void USBHAL::remoteWakeup(void) {
+ // Clearing DSUS bit initiates a remote wakeup if the
+ // device is currently enabled and suspended - otherwise
+ // it has no effect.
+ LPC_USB->DEVCMDSTAT = devCmdStat & ~DSUS;
+}
+
+
+static void disableEndpoints(void) {
+ uint32_t logEp;
+
+ // Ref. Table 158 "When a bus reset is received, software
+ // must set the disable bit of all endpoints to 1".
+
+ for (logEp = 1; logEp < NUMBER_OF_LOGICAL_ENDPOINTS; logEp++) {
+ ep[logEp].out[0] = CMDSTS_D;
+ ep[logEp].out[1] = CMDSTS_D;
+ ep[logEp].in[0] = CMDSTS_D;
+ ep[logEp].in[1] = CMDSTS_D;
+ }
+
+ // Start of USB RAM for endpoints > 0
+ epRamPtr = usbRamPtr;
+}
+
+
+
+void USBHAL::_usbisr(void) {
+ instance->usbisr();
+}
+
+void USBHAL::usbisr(void) {
+ // Start of frame
+ if (LPC_USB->INTSTAT & FRAME_INT) {
+ // Clear SOF interrupt
+ LPC_USB->INTSTAT = FRAME_INT;
+
+ // SOF event, read frame number
+ SOF(FRAME_NR(LPC_USB->INFO));
+ }
+
+ // Device state
+ if (LPC_USB->INTSTAT & DEV_INT) {
+ LPC_USB->INTSTAT = DEV_INT;
+
+ if (LPC_USB->DEVCMDSTAT & DSUS_C) {
+ // Suspend status changed
+ LPC_USB->DEVCMDSTAT = devCmdStat | DSUS_C;
+ if((LPC_USB->DEVCMDSTAT & DSUS) != 0) {
+ suspendStateChanged(1);
+ }
+ }
+
+ if (LPC_USB->DEVCMDSTAT & DRES_C) {
+ // Bus reset
+ LPC_USB->DEVCMDSTAT = devCmdStat | DRES_C;
+
+ suspendStateChanged(0);
+
+ // Disable endpoints > 0
+ disableEndpoints();
+
+ // Bus reset event
+ busReset();
+ }
+ }
+
+ // Endpoint 0
+ if (LPC_USB->INTSTAT & EP(EP0OUT)) {
+ // Clear EP0OUT/SETUP interrupt
+ LPC_USB->INTSTAT = EP(EP0OUT);
+
+ // Check if SETUP
+ if (LPC_USB->DEVCMDSTAT & SETUP) {
+ // Clear Active and Stall bits for EP0
+ // Documentation does not make it clear if we must use the
+ // EPSKIP register to achieve this, Fig. 16 and NXP reference
+ // code suggests we can just clear the Active bits - check with
+ // NXP to be sure.
+ ep[0].in[0] = 0;
+ ep[0].out[0] = 0;
+
+ // Clear EP0IN interrupt
+ LPC_USB->INTSTAT = EP(EP0IN);
+
+ // Clear SETUP (and INTONNAK_CI/O) in device status register
+ LPC_USB->DEVCMDSTAT = devCmdStat | SETUP;
+
+ // EP0 SETUP event (SETUP data received)
+ EP0setupCallback();
+ } else {
+ // EP0OUT ACK event (OUT data received)
+ EP0out();
+ }
+ }
+
+ if (LPC_USB->INTSTAT & EP(EP0IN)) {
+ // Clear EP0IN interrupt
+ LPC_USB->INTSTAT = EP(EP0IN);
+
+ // EP0IN ACK event (IN data sent)
+ EP0in();
+ }
+
+ for (uint8_t num = 2; num < 5*2; num++) {
+ if (LPC_USB->INTSTAT & EP(num)) {
+ LPC_USB->INTSTAT = EP(num);
+ epComplete |= EP(num);
+ if ((instance->*(epCallback[num - 2]))()) {
+ epComplete &= ~EP(num);
+ }
+ }
+ }
+}
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/USBDevice/USBDevice/USBHAL_LPC17.cpp Fri Aug 29 08:33:17 2014 +0000
@@ -0,0 +1,623 @@
+/* Copyright (c) 2010-2011 mbed.org, MIT License
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy of this software
+* and associated documentation files (the "Software"), to deal in the Software without
+* restriction, including without limitation the rights to use, copy, modify, merge, publish,
+* distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the
+* Software is furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in all copies or
+* substantial portions of the Software.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING
+* BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
+* DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+*/
+
+#if defined(TARGET_LPC1768) || defined(TARGET_LPC2368)
+
+#include "USBHAL.h"
+
+
+// Get endpoint direction
+#define IN_EP(endpoint) ((endpoint) & 1U ? true : false)
+#define OUT_EP(endpoint) ((endpoint) & 1U ? false : true)
+
+// Convert physical endpoint number to register bit
+#define EP(endpoint) (1UL<<endpoint)
+
+// Power Control for Peripherals register
+#define PCUSB (1UL<<31)
+
+// USB Clock Control register
+#define DEV_CLK_EN (1UL<<1)
+#define AHB_CLK_EN (1UL<<4)
+
+// USB Clock Status register
+#define DEV_CLK_ON (1UL<<1)
+#define AHB_CLK_ON (1UL<<4)
+
+// USB Device Interupt registers
+#define FRAME (1UL<<0)
+#define EP_FAST (1UL<<1)
+#define EP_SLOW (1UL<<2)
+#define DEV_STAT (1UL<<3)
+#define CCEMPTY (1UL<<4)
+#define CDFULL (1UL<<5)
+#define RxENDPKT (1UL<<6)
+#define TxENDPKT (1UL<<7)
+#define EP_RLZED (1UL<<8)
+#define ERR_INT (1UL<<9)
+
+// USB Control register
+#define RD_EN (1<<0)
+#define WR_EN (1<<1)
+#define LOG_ENDPOINT(endpoint) ((endpoint>>1)<<2)
+
+// USB Receive Packet Length register
+#define DV (1UL<<10)
+#define PKT_RDY (1UL<<11)
+#define PKT_LNGTH_MASK (0x3ff)
+
+// Serial Interface Engine (SIE)
+#define SIE_WRITE (0x01)
+#define SIE_READ (0x02)
+#define SIE_COMMAND (0x05)
+#define SIE_CMD_CODE(phase, data) ((phase<<8)|(data<<16))
+
+// SIE Command codes
+#define SIE_CMD_SET_ADDRESS (0xD0)
+#define SIE_CMD_CONFIGURE_DEVICE (0xD8)
+#define SIE_CMD_SET_MODE (0xF3)
+#define SIE_CMD_READ_FRAME_NUMBER (0xF5)
+#define SIE_CMD_READ_TEST_REGISTER (0xFD)
+#define SIE_CMD_SET_DEVICE_STATUS (0xFE)
+#define SIE_CMD_GET_DEVICE_STATUS (0xFE)
+#define SIE_CMD_GET_ERROR_CODE (0xFF)
+#define SIE_CMD_READ_ERROR_STATUS (0xFB)
+
+#define SIE_CMD_SELECT_ENDPOINT(endpoint) (0x00+endpoint)
+#define SIE_CMD_SELECT_ENDPOINT_CLEAR_INTERRUPT(endpoint) (0x40+endpoint)
+#define SIE_CMD_SET_ENDPOINT_STATUS(endpoint) (0x40+endpoint)
+
+#define SIE_CMD_CLEAR_BUFFER (0xF2)
+#define SIE_CMD_VALIDATE_BUFFER (0xFA)
+
+// SIE Device Status register
+#define SIE_DS_CON (1<<0)
+#define SIE_DS_CON_CH (1<<1)
+#define SIE_DS_SUS (1<<2)
+#define SIE_DS_SUS_CH (1<<3)
+#define SIE_DS_RST (1<<4)
+
+// SIE Device Set Address register
+#define SIE_DSA_DEV_EN (1<<7)
+
+// SIE Configue Device register
+#define SIE_CONF_DEVICE (1<<0)
+
+// Select Endpoint register
+#define SIE_SE_FE (1<<0)
+#define SIE_SE_ST (1<<1)
+#define SIE_SE_STP (1<<2)
+#define SIE_SE_PO (1<<3)
+#define SIE_SE_EPN (1<<4)
+#define SIE_SE_B_1_FULL (1<<5)
+#define SIE_SE_B_2_FULL (1<<6)
+
+// Set Endpoint Status command
+#define SIE_SES_ST (1<<0)
+#define SIE_SES_DA (1<<5)
+#define SIE_SES_RF_MO (1<<6)
+#define SIE_SES_CND_ST (1<<7)
+
+
+USBHAL * USBHAL::instance;
+
+static volatile int epComplete;
+static uint32_t endpointStallState;
+
+static void SIECommand(uint32_t command) {
+ // The command phase of a SIE transaction
+ LPC_USB->USBDevIntClr = CCEMPTY;
+ LPC_USB->USBCmdCode = SIE_CMD_CODE(SIE_COMMAND, command);
+ while (!(LPC_USB->USBDevIntSt & CCEMPTY));
+}
+
+static void SIEWriteData(uint8_t data) {
+ // The data write phase of a SIE transaction
+ LPC_USB->USBDevIntClr = CCEMPTY;
+ LPC_USB->USBCmdCode = SIE_CMD_CODE(SIE_WRITE, data);
+ while (!(LPC_USB->USBDevIntSt & CCEMPTY));
+}
+
+static uint8_t SIEReadData(uint32_t command) {
+ // The data read phase of a SIE transaction
+ LPC_USB->USBDevIntClr = CDFULL;
+ LPC_USB->USBCmdCode = SIE_CMD_CODE(SIE_READ, command);
+ while (!(LPC_USB->USBDevIntSt & CDFULL));
+ return (uint8_t)LPC_USB->USBCmdData;
+}
+
+static void SIEsetDeviceStatus(uint8_t status) {
+ // Write SIE device status register
+ SIECommand(SIE_CMD_SET_DEVICE_STATUS);
+ SIEWriteData(status);
+}
+
+static uint8_t SIEgetDeviceStatus(void) {
+ // Read SIE device status register
+ SIECommand(SIE_CMD_GET_DEVICE_STATUS);
+ return SIEReadData(SIE_CMD_GET_DEVICE_STATUS);
+}
+
+void SIEsetAddress(uint8_t address) {
+ // Write SIE device address register
+ SIECommand(SIE_CMD_SET_ADDRESS);
+ SIEWriteData((address & 0x7f) | SIE_DSA_DEV_EN);
+}
+
+static uint8_t SIEselectEndpoint(uint8_t endpoint) {
+ // SIE select endpoint command
+ SIECommand(SIE_CMD_SELECT_ENDPOINT(endpoint));
+ return SIEReadData(SIE_CMD_SELECT_ENDPOINT(endpoint));
+}
+
+static uint8_t SIEclearBuffer(void) {
+ // SIE clear buffer command
+ SIECommand(SIE_CMD_CLEAR_BUFFER);
+ return SIEReadData(SIE_CMD_CLEAR_BUFFER);
+}
+
+static void SIEvalidateBuffer(void) {
+ // SIE validate buffer command
+ SIECommand(SIE_CMD_VALIDATE_BUFFER);
+}
+
+static void SIEsetEndpointStatus(uint8_t endpoint, uint8_t status) {
+ // SIE set endpoint status command
+ SIECommand(SIE_CMD_SET_ENDPOINT_STATUS(endpoint));
+ SIEWriteData(status);
+}
+
+static uint16_t SIEgetFrameNumber(void) __attribute__ ((unused));
+static uint16_t SIEgetFrameNumber(void) {
+ // Read current frame number
+ uint16_t lowByte;
+ uint16_t highByte;
+
+ SIECommand(SIE_CMD_READ_FRAME_NUMBER);
+ lowByte = SIEReadData(SIE_CMD_READ_FRAME_NUMBER);
+ highByte = SIEReadData(SIE_CMD_READ_FRAME_NUMBER);
+
+ return (highByte << 8) | lowByte;
+}
+
+static void SIEconfigureDevice(void) {
+ // SIE Configure device command
+ SIECommand(SIE_CMD_CONFIGURE_DEVICE);
+ SIEWriteData(SIE_CONF_DEVICE);
+}
+
+static void SIEunconfigureDevice(void) {
+ // SIE Configure device command
+ SIECommand(SIE_CMD_CONFIGURE_DEVICE);
+ SIEWriteData(0);
+}
+
+static void SIEconnect(void) {
+ // Connect USB device
+ uint8_t status = SIEgetDeviceStatus();
+ SIEsetDeviceStatus(status | SIE_DS_CON);
+}
+
+
+static void SIEdisconnect(void) {
+ // Disconnect USB device
+ uint8_t status = SIEgetDeviceStatus();
+ SIEsetDeviceStatus(status & ~SIE_DS_CON);
+}
+
+
+static uint8_t selectEndpointClearInterrupt(uint8_t endpoint) {
+ // Implemented using using EP_INT_CLR.
+ LPC_USB->USBEpIntClr = EP(endpoint);
+ while (!(LPC_USB->USBDevIntSt & CDFULL));
+ return (uint8_t)LPC_USB->USBCmdData;
+}
+
+
+static void enableEndpointEvent(uint8_t endpoint) {
+ // Enable an endpoint interrupt
+ LPC_USB->USBEpIntEn |= EP(endpoint);
+}
+
+static void disableEndpointEvent(uint8_t endpoint) __attribute__ ((unused));
+static void disableEndpointEvent(uint8_t endpoint) {
+ // Disable an endpoint interrupt
+ LPC_USB->USBEpIntEn &= ~EP(endpoint);
+}
+
+static volatile uint32_t __attribute__((used)) dummyRead;
+uint32_t USBHAL::endpointReadcore(uint8_t endpoint, uint8_t *buffer) {
+ // Read from an OUT endpoint
+ uint32_t size;
+ uint32_t i;
+ uint32_t data = 0;
+ uint8_t offset;
+
+ LPC_USB->USBCtrl = LOG_ENDPOINT(endpoint) | RD_EN;
+ while (!(LPC_USB->USBRxPLen & PKT_RDY));
+
+ size = LPC_USB->USBRxPLen & PKT_LNGTH_MASK;
+
+ offset = 0;
+
+ if (size > 0) {
+ for (i=0; i<size; i++) {
+ if (offset==0) {
+ // Fetch up to four bytes of data as a word
+ data = LPC_USB->USBRxData;
+ }
+
+ // extract a byte
+ *buffer = (data>>offset) & 0xff;
+ buffer++;
+
+ // move on to the next byte
+ offset = (offset + 8) % 32;
+ }
+ } else {
+ dummyRead = LPC_USB->USBRxData;
+ }
+
+ LPC_USB->USBCtrl = 0;
+
+ if ((endpoint >> 1) % 3 || (endpoint >> 1) == 0) {
+ SIEselectEndpoint(endpoint);
+ SIEclearBuffer();
+ }
+
+ return size;
+}
+
+static void endpointWritecore(uint8_t endpoint, uint8_t *buffer, uint32_t size) {
+ // Write to an IN endpoint
+ uint32_t temp, data;
+ uint8_t offset;
+
+ LPC_USB->USBCtrl = LOG_ENDPOINT(endpoint) | WR_EN;
+
+ LPC_USB->USBTxPLen = size;
+ offset = 0;
+ data = 0;
+
+ if (size>0) {
+ do {
+ // Fetch next data byte into a word-sized temporary variable
+ temp = *buffer++;
+
+ // Add to current data word
+ temp = temp << offset;
+ data = data | temp;
+
+ // move on to the next byte
+ offset = (offset + 8) % 32;
+ size--;
+
+ if ((offset==0) || (size==0)) {
+ // Write the word to the endpoint
+ LPC_USB->USBTxData = data;
+ data = 0;
+ }
+ } while (size>0);
+ } else {
+ LPC_USB->USBTxData = 0;
+ }
+
+ // Clear WR_EN to cover zero length packet case
+ LPC_USB->USBCtrl=0;
+
+ SIEselectEndpoint(endpoint);
+ SIEvalidateBuffer();
+}
+
+USBHAL::USBHAL(void) {
+ // Disable IRQ
+ NVIC_DisableIRQ(USB_IRQn);
+
+ // fill in callback array
+ epCallback[0] = &USBHAL::EP1_OUT_callback;
+ epCallback[1] = &USBHAL::EP1_IN_callback;
+ epCallback[2] = &USBHAL::EP2_OUT_callback;
+ epCallback[3] = &USBHAL::EP2_IN_callback;
+ epCallback[4] = &USBHAL::EP3_OUT_callback;
+ epCallback[5] = &USBHAL::EP3_IN_callback;
+ epCallback[6] = &USBHAL::EP4_OUT_callback;
+ epCallback[7] = &USBHAL::EP4_IN_callback;
+ epCallback[8] = &USBHAL::EP5_OUT_callback;
+ epCallback[9] = &USBHAL::EP5_IN_callback;
+ epCallback[10] = &USBHAL::EP6_OUT_callback;
+ epCallback[11] = &USBHAL::EP6_IN_callback;
+ epCallback[12] = &USBHAL::EP7_OUT_callback;
+ epCallback[13] = &USBHAL::EP7_IN_callback;
+ epCallback[14] = &USBHAL::EP8_OUT_callback;
+ epCallback[15] = &USBHAL::EP8_IN_callback;
+ epCallback[16] = &USBHAL::EP9_OUT_callback;
+ epCallback[17] = &USBHAL::EP9_IN_callback;
+ epCallback[18] = &USBHAL::EP10_OUT_callback;
+ epCallback[19] = &USBHAL::EP10_IN_callback;
+ epCallback[20] = &USBHAL::EP11_OUT_callback;
+ epCallback[21] = &USBHAL::EP11_IN_callback;
+ epCallback[22] = &USBHAL::EP12_OUT_callback;
+ epCallback[23] = &USBHAL::EP12_IN_callback;
+ epCallback[24] = &USBHAL::EP13_OUT_callback;
+ epCallback[25] = &USBHAL::EP13_IN_callback;
+ epCallback[26] = &USBHAL::EP14_OUT_callback;
+ epCallback[27] = &USBHAL::EP14_IN_callback;
+ epCallback[28] = &USBHAL::EP15_OUT_callback;
+ epCallback[29] = &USBHAL::EP15_IN_callback;
+
+ // Enable power to USB device controller
+ LPC_SC->PCONP |= PCUSB;
+
+ // Enable USB clocks
+ LPC_USB->USBClkCtrl |= DEV_CLK_EN | AHB_CLK_EN;
+ while (LPC_USB->USBClkSt != (DEV_CLK_ON | AHB_CLK_ON));
+
+ // Configure pins P0.29 and P0.30 to be USB D+ and USB D-
+ LPC_PINCON->PINSEL1 &= 0xc3ffffff;
+ LPC_PINCON->PINSEL1 |= 0x14000000;
+
+ // Disconnect USB device
+ SIEdisconnect();
+
+ // Configure pin P2.9 to be Connect
+ LPC_PINCON->PINSEL4 &= 0xfffcffff;
+ LPC_PINCON->PINSEL4 |= 0x00040000;
+
+ // Connect must be low for at least 2.5uS
+ wait(0.3);
+
+ // Set the maximum packet size for the control endpoints
+ realiseEndpoint(EP0IN, MAX_PACKET_SIZE_EP0, 0);
+ realiseEndpoint(EP0OUT, MAX_PACKET_SIZE_EP0, 0);
+
+ // Attach IRQ
+ instance = this;
+ NVIC_SetVector(USB_IRQn, (uint32_t)&_usbisr);
+
+ // Enable interrupts for device events and EP0
+ LPC_USB->USBDevIntEn = EP_SLOW | DEV_STAT | FRAME;
+ enableEndpointEvent(EP0IN);
+ enableEndpointEvent(EP0OUT);
+}
+
+USBHAL::~USBHAL(void) {
+ // Ensure device disconnected
+ SIEdisconnect();
+ // Disable USB interrupts
+ NVIC_DisableIRQ(USB_IRQn);
+}
+
+void USBHAL::connect(void) {
+ NVIC_EnableIRQ(USB_IRQn);
+ // Connect USB device
+ SIEconnect();
+}
+
+void USBHAL::disconnect(void) {
+ NVIC_DisableIRQ(USB_IRQn);
+ // Disconnect USB device
+ SIEdisconnect();
+}
+
+void USBHAL::configureDevice(void) {
+ SIEconfigureDevice();
+}
+
+void USBHAL::unconfigureDevice(void) {
+ SIEunconfigureDevice();
+}
+
+void USBHAL::setAddress(uint8_t address) {
+ SIEsetAddress(address);
+}
+
+void USBHAL::EP0setup(uint8_t *buffer) {
+ endpointReadcore(EP0OUT, buffer);
+}
+
+void USBHAL::EP0read(void) {
+ // Not required
+}
+
+void USBHAL::EP0readStage(void) {
+ // Not required
+}
+
+uint32_t USBHAL::EP0getReadResult(uint8_t *buffer) {
+ return endpointReadcore(EP0OUT, buffer);
+}
+
+void USBHAL::EP0write(uint8_t *buffer, uint32_t size) {
+ endpointWritecore(EP0IN, buffer, size);
+}
+
+void USBHAL::EP0getWriteResult(void) {
+ // Not required
+}
+
+void USBHAL::EP0stall(void) {
+ // This will stall both control endpoints
+ stallEndpoint(EP0OUT);
+}
+
+EP_STATUS USBHAL::endpointRead(uint8_t endpoint, uint32_t maximumSize) {
+ return EP_PENDING;
+}
+
+EP_STATUS USBHAL::endpointReadResult(uint8_t endpoint, uint8_t * buffer, uint32_t *bytesRead) {
+
+ //for isochronous endpoint, we don't wait an interrupt
+ if ((endpoint >> 1) % 3 || (endpoint >> 1) == 0) {
+ if (!(epComplete & EP(endpoint)))
+ return EP_PENDING;
+ }
+
+ *bytesRead = endpointReadcore(endpoint, buffer);
+ epComplete &= ~EP(endpoint);
+ return EP_COMPLETED;
+}
+
+EP_STATUS USBHAL::endpointWrite(uint8_t endpoint, uint8_t *data, uint32_t size) {
+ if (getEndpointStallState(endpoint)) {
+ return EP_STALLED;
+ }
+
+ epComplete &= ~EP(endpoint);
+
+ endpointWritecore(endpoint, data, size);
+ return EP_PENDING;
+}
+
+EP_STATUS USBHAL::endpointWriteResult(uint8_t endpoint) {
+ if (epComplete & EP(endpoint)) {
+ epComplete &= ~EP(endpoint);
+ return EP_COMPLETED;
+ }
+
+ return EP_PENDING;
+}
+
+bool USBHAL::realiseEndpoint(uint8_t endpoint, uint32_t maxPacket, uint32_t flags) {
+ // Realise an endpoint
+ LPC_USB->USBDevIntClr = EP_RLZED;
+ LPC_USB->USBReEp |= EP(endpoint);
+ LPC_USB->USBEpInd = endpoint;
+ LPC_USB->USBMaxPSize = maxPacket;
+
+ while (!(LPC_USB->USBDevIntSt & EP_RLZED));
+ LPC_USB->USBDevIntClr = EP_RLZED;
+
+ // Clear stall state
+ endpointStallState &= ~EP(endpoint);
+
+ enableEndpointEvent(endpoint);
+ return true;
+}
+
+void USBHAL::stallEndpoint(uint8_t endpoint) {
+ // Stall an endpoint
+ if ( (endpoint==EP0IN) || (endpoint==EP0OUT) ) {
+ // Conditionally stall both control endpoints
+ SIEsetEndpointStatus(EP0OUT, SIE_SES_CND_ST);
+ } else {
+ SIEsetEndpointStatus(endpoint, SIE_SES_ST);
+
+ // Update stall state
+ endpointStallState |= EP(endpoint);
+ }
+}
+
+void USBHAL::unstallEndpoint(uint8_t endpoint) {
+ // Unstall an endpoint. The endpoint will also be reinitialised
+ SIEsetEndpointStatus(endpoint, 0);
+
+ // Update stall state
+ endpointStallState &= ~EP(endpoint);
+}
+
+bool USBHAL::getEndpointStallState(uint8_t endpoint) {
+ // Returns true if endpoint stalled
+ return endpointStallState & EP(endpoint);
+}
+
+void USBHAL::remoteWakeup(void) {
+ // Remote wakeup
+ uint8_t status;
+
+ // Enable USB clocks
+ LPC_USB->USBClkCtrl |= DEV_CLK_EN | AHB_CLK_EN;
+ while (LPC_USB->USBClkSt != (DEV_CLK_ON | AHB_CLK_ON));
+
+ status = SIEgetDeviceStatus();
+ SIEsetDeviceStatus(status & ~SIE_DS_SUS);
+}
+
+void USBHAL::_usbisr(void) {
+ instance->usbisr();
+}
+
+
+void USBHAL::usbisr(void) {
+ uint8_t devStat;
+
+ if (LPC_USB->USBDevIntSt & FRAME) {
+ // Start of frame event
+ SOF(SIEgetFrameNumber());
+ // Clear interrupt status flag
+ LPC_USB->USBDevIntClr = FRAME;
+ }
+
+ if (LPC_USB->USBDevIntSt & DEV_STAT) {
+ // Device Status interrupt
+ // Must clear the interrupt status flag before reading the device status from the SIE
+ LPC_USB->USBDevIntClr = DEV_STAT;
+
+ // Read device status from SIE
+ devStat = SIEgetDeviceStatus();
+ //printf("devStat: %d\r\n", devStat);
+
+ if (devStat & SIE_DS_SUS_CH) {
+ // Suspend status changed
+ if((devStat & SIE_DS_SUS) != 0) {
+ suspendStateChanged(0);
+ }
+ }
+
+ if (devStat & SIE_DS_RST) {
+ // Bus reset
+ if((devStat & SIE_DS_SUS) == 0) {
+ suspendStateChanged(1);
+ }
+ busReset();
+ }
+ }
+
+ if (LPC_USB->USBDevIntSt & EP_SLOW) {
+ // (Slow) Endpoint Interrupt
+
+ // Process each endpoint interrupt
+ if (LPC_USB->USBEpIntSt & EP(EP0OUT)) {
+ if (selectEndpointClearInterrupt(EP0OUT) & SIE_SE_STP) {
+ // this is a setup packet
+ EP0setupCallback();
+ } else {
+ EP0out();
+ }
+ LPC_USB->USBDevIntClr = EP_SLOW;
+ }
+
+ if (LPC_USB->USBEpIntSt & EP(EP0IN)) {
+ selectEndpointClearInterrupt(EP0IN);
+ LPC_USB->USBDevIntClr = EP_SLOW;
+ EP0in();
+ }
+
+ for (uint8_t num = 2; num < 16*2; num++) {
+ if (LPC_USB->USBEpIntSt & EP(num)) {
+ selectEndpointClearInterrupt(num);
+ epComplete |= EP(num);
+ LPC_USB->USBDevIntClr = EP_SLOW;
+ if ((instance->*(epCallback[num - 2]))()) {
+ epComplete &= ~EP(num);
+ }
+ }
+ }
+ }
+}
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/USBDevice/USBDevice/USBHAL_LPC40.cpp Fri Aug 29 08:33:17 2014 +0000
@@ -0,0 +1,628 @@
+/* Copyright (c) 2010-2011 mbed.org, MIT License
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy of this software
+* and associated documentation files (the "Software"), to deal in the Software without
+* restriction, including without limitation the rights to use, copy, modify, merge, publish,
+* distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the
+* Software is furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in all copies or
+* substantial portions of the Software.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING
+* BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
+* DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+*/
+
+#if defined(TARGET_LPC4088)
+
+#include "USBHAL.h"
+
+
+// Get endpoint direction
+#define IN_EP(endpoint) ((endpoint) & 1U ? true : false)
+#define OUT_EP(endpoint) ((endpoint) & 1U ? false : true)
+
+// Convert physical endpoint number to register bit
+#define EP(endpoint) (1UL<<endpoint)
+
+// Power Control for Peripherals register
+#define PCUSB (1UL<<31)
+
+// USB Clock Control register
+#define DEV_CLK_EN (1UL<<1)
+#define PORT_CLK_EN (1UL<<3)
+#define AHB_CLK_EN (1UL<<4)
+
+// USB Clock Status register
+#define DEV_CLK_ON (1UL<<1)
+#define AHB_CLK_ON (1UL<<4)
+
+// USB Device Interupt registers
+#define FRAME (1UL<<0)
+#define EP_FAST (1UL<<1)
+#define EP_SLOW (1UL<<2)
+#define DEV_STAT (1UL<<3)
+#define CCEMPTY (1UL<<4)
+#define CDFULL (1UL<<5)
+#define RxENDPKT (1UL<<6)
+#define TxENDPKT (1UL<<7)
+#define EP_RLZED (1UL<<8)
+#define ERR_INT (1UL<<9)
+
+// USB Control register
+#define RD_EN (1<<0)
+#define WR_EN (1<<1)
+#define LOG_ENDPOINT(endpoint) ((endpoint>>1)<<2)
+
+// USB Receive Packet Length register
+#define DV (1UL<<10)
+#define PKT_RDY (1UL<<11)
+#define PKT_LNGTH_MASK (0x3ff)
+
+// Serial Interface Engine (SIE)
+#define SIE_WRITE (0x01)
+#define SIE_READ (0x02)
+#define SIE_COMMAND (0x05)
+#define SIE_CMD_CODE(phase, data) ((phase<<8)|(data<<16))
+
+// SIE Command codes
+#define SIE_CMD_SET_ADDRESS (0xD0)
+#define SIE_CMD_CONFIGURE_DEVICE (0xD8)
+#define SIE_CMD_SET_MODE (0xF3)
+#define SIE_CMD_READ_FRAME_NUMBER (0xF5)
+#define SIE_CMD_READ_TEST_REGISTER (0xFD)
+#define SIE_CMD_SET_DEVICE_STATUS (0xFE)
+#define SIE_CMD_GET_DEVICE_STATUS (0xFE)
+#define SIE_CMD_GET_ERROR_CODE (0xFF)
+#define SIE_CMD_READ_ERROR_STATUS (0xFB)
+
+#define SIE_CMD_SELECT_ENDPOINT(endpoint) (0x00+endpoint)
+#define SIE_CMD_SELECT_ENDPOINT_CLEAR_INTERRUPT(endpoint) (0x40+endpoint)
+#define SIE_CMD_SET_ENDPOINT_STATUS(endpoint) (0x40+endpoint)
+
+#define SIE_CMD_CLEAR_BUFFER (0xF2)
+#define SIE_CMD_VALIDATE_BUFFER (0xFA)
+
+// SIE Device Status register
+#define SIE_DS_CON (1<<0)
+#define SIE_DS_CON_CH (1<<1)
+#define SIE_DS_SUS (1<<2)
+#define SIE_DS_SUS_CH (1<<3)
+#define SIE_DS_RST (1<<4)
+
+// SIE Device Set Address register
+#define SIE_DSA_DEV_EN (1<<7)
+
+// SIE Configue Device register
+#define SIE_CONF_DEVICE (1<<0)
+
+// Select Endpoint register
+#define SIE_SE_FE (1<<0)
+#define SIE_SE_ST (1<<1)
+#define SIE_SE_STP (1<<2)
+#define SIE_SE_PO (1<<3)
+#define SIE_SE_EPN (1<<4)
+#define SIE_SE_B_1_FULL (1<<5)
+#define SIE_SE_B_2_FULL (1<<6)
+
+// Set Endpoint Status command
+#define SIE_SES_ST (1<<0)
+#define SIE_SES_DA (1<<5)
+#define SIE_SES_RF_MO (1<<6)
+#define SIE_SES_CND_ST (1<<7)
+
+
+USBHAL * USBHAL::instance;
+
+static volatile int epComplete;
+static uint32_t endpointStallState;
+
+static void SIECommand(uint32_t command) {
+ // The command phase of a SIE transaction
+ LPC_USB->DevIntClr = CCEMPTY;
+ LPC_USB->CmdCode = SIE_CMD_CODE(SIE_COMMAND, command);
+ while (!(LPC_USB->DevIntSt & CCEMPTY));
+}
+
+static void SIEWriteData(uint8_t data) {
+ // The data write phase of a SIE transaction
+ LPC_USB->DevIntClr = CCEMPTY;
+ LPC_USB->CmdCode = SIE_CMD_CODE(SIE_WRITE, data);
+ while (!(LPC_USB->DevIntSt & CCEMPTY));
+}
+
+static uint8_t SIEReadData(uint32_t command) {
+ // The data read phase of a SIE transaction
+ LPC_USB->DevIntClr = CDFULL;
+ LPC_USB->CmdCode = SIE_CMD_CODE(SIE_READ, command);
+ while (!(LPC_USB->DevIntSt & CDFULL));
+ return (uint8_t)LPC_USB->CmdData;
+}
+
+static void SIEsetDeviceStatus(uint8_t status) {
+ // Write SIE device status register
+ SIECommand(SIE_CMD_SET_DEVICE_STATUS);
+ SIEWriteData(status);
+}
+
+static uint8_t SIEgetDeviceStatus(void) {
+ // Read SIE device status register
+ SIECommand(SIE_CMD_GET_DEVICE_STATUS);
+ return SIEReadData(SIE_CMD_GET_DEVICE_STATUS);
+}
+
+void SIEsetAddress(uint8_t address) {
+ // Write SIE device address register
+ SIECommand(SIE_CMD_SET_ADDRESS);
+ SIEWriteData((address & 0x7f) | SIE_DSA_DEV_EN);
+}
+
+static uint8_t SIEselectEndpoint(uint8_t endpoint) {
+ // SIE select endpoint command
+ SIECommand(SIE_CMD_SELECT_ENDPOINT(endpoint));
+ return SIEReadData(SIE_CMD_SELECT_ENDPOINT(endpoint));
+}
+
+static uint8_t SIEclearBuffer(void) {
+ // SIE clear buffer command
+ SIECommand(SIE_CMD_CLEAR_BUFFER);
+ return SIEReadData(SIE_CMD_CLEAR_BUFFER);
+}
+
+static void SIEvalidateBuffer(void) {
+ // SIE validate buffer command
+ SIECommand(SIE_CMD_VALIDATE_BUFFER);
+}
+
+static void SIEsetEndpointStatus(uint8_t endpoint, uint8_t status) {
+ // SIE set endpoint status command
+ SIECommand(SIE_CMD_SET_ENDPOINT_STATUS(endpoint));
+ SIEWriteData(status);
+}
+
+static uint16_t SIEgetFrameNumber(void) __attribute__ ((unused));
+static uint16_t SIEgetFrameNumber(void) {
+ // Read current frame number
+ uint16_t lowByte;
+ uint16_t highByte;
+
+ SIECommand(SIE_CMD_READ_FRAME_NUMBER);
+ lowByte = SIEReadData(SIE_CMD_READ_FRAME_NUMBER);
+ highByte = SIEReadData(SIE_CMD_READ_FRAME_NUMBER);
+
+ return (highByte << 8) | lowByte;
+}
+
+static void SIEconfigureDevice(void) {
+ // SIE Configure device command
+ SIECommand(SIE_CMD_CONFIGURE_DEVICE);
+ SIEWriteData(SIE_CONF_DEVICE);
+}
+
+static void SIEunconfigureDevice(void) {
+ // SIE Configure device command
+ SIECommand(SIE_CMD_CONFIGURE_DEVICE);
+ SIEWriteData(0);
+}
+
+static void SIEconnect(void) {
+ // Connect USB device
+ uint8_t status = SIEgetDeviceStatus();
+ SIEsetDeviceStatus(status | SIE_DS_CON);
+}
+
+
+static void SIEdisconnect(void) {
+ // Disconnect USB device
+ uint8_t status = SIEgetDeviceStatus();
+ SIEsetDeviceStatus(status & ~SIE_DS_CON);
+}
+
+
+static uint8_t selectEndpointClearInterrupt(uint8_t endpoint) {
+ // Implemented using using EP_INT_CLR.
+ LPC_USB->EpIntClr = EP(endpoint);
+ while (!(LPC_USB->DevIntSt & CDFULL));
+ return (uint8_t)LPC_USB->CmdData;
+}
+
+
+static void enableEndpointEvent(uint8_t endpoint) {
+ // Enable an endpoint interrupt
+ LPC_USB->EpIntEn |= EP(endpoint);
+}
+
+static void disableEndpointEvent(uint8_t endpoint) __attribute__ ((unused));
+static void disableEndpointEvent(uint8_t endpoint) {
+ // Disable an endpoint interrupt
+ LPC_USB->EpIntEn &= ~EP(endpoint);
+}
+
+static volatile uint32_t __attribute__((used)) dummyRead;
+uint32_t USBHAL::endpointReadcore(uint8_t endpoint, uint8_t *buffer) {
+ // Read from an OUT endpoint
+ uint32_t size;
+ uint32_t i;
+ uint32_t data = 0;
+ uint8_t offset;
+
+ LPC_USB->Ctrl = LOG_ENDPOINT(endpoint) | RD_EN;
+ while (!(LPC_USB->RxPLen & PKT_RDY));
+
+ size = LPC_USB->RxPLen & PKT_LNGTH_MASK;
+
+ offset = 0;
+
+ if (size > 0) {
+ for (i=0; i<size; i++) {
+ if (offset==0) {
+ // Fetch up to four bytes of data as a word
+ data = LPC_USB->RxData;
+ }
+
+ // extract a byte
+ *buffer = (data>>offset) & 0xff;
+ buffer++;
+
+ // move on to the next byte
+ offset = (offset + 8) % 32;
+ }
+ } else {
+ dummyRead = LPC_USB->RxData;
+ }
+
+ LPC_USB->Ctrl = 0;
+
+ if ((endpoint >> 1) % 3 || (endpoint >> 1) == 0) {
+ SIEselectEndpoint(endpoint);
+ SIEclearBuffer();
+ }
+
+ return size;
+}
+
+static void endpointWritecore(uint8_t endpoint, uint8_t *buffer, uint32_t size) {
+ // Write to an IN endpoint
+ uint32_t temp, data;
+ uint8_t offset;
+
+ LPC_USB->Ctrl = LOG_ENDPOINT(endpoint) | WR_EN;
+
+ LPC_USB->TxPLen = size;
+ offset = 0;
+ data = 0;
+
+ if (size>0) {
+ do {
+ // Fetch next data byte into a word-sized temporary variable
+ temp = *buffer++;
+
+ // Add to current data word
+ temp = temp << offset;
+ data = data | temp;
+
+ // move on to the next byte
+ offset = (offset + 8) % 32;
+ size--;
+
+ if ((offset==0) || (size==0)) {
+ // Write the word to the endpoint
+ LPC_USB->TxData = data;
+ data = 0;
+ }
+ } while (size>0);
+ } else {
+ LPC_USB->TxData = 0;
+ }
+
+ // Clear WR_EN to cover zero length packet case
+ LPC_USB->Ctrl=0;
+
+ SIEselectEndpoint(endpoint);
+ SIEvalidateBuffer();
+}
+
+USBHAL::USBHAL(void) {
+ // Disable IRQ
+ NVIC_DisableIRQ(USB_IRQn);
+
+ // fill in callback array
+ epCallback[0] = &USBHAL::EP1_OUT_callback;
+ epCallback[1] = &USBHAL::EP1_IN_callback;
+ epCallback[2] = &USBHAL::EP2_OUT_callback;
+ epCallback[3] = &USBHAL::EP2_IN_callback;
+ epCallback[4] = &USBHAL::EP3_OUT_callback;
+ epCallback[5] = &USBHAL::EP3_IN_callback;
+ epCallback[6] = &USBHAL::EP4_OUT_callback;
+ epCallback[7] = &USBHAL::EP4_IN_callback;
+ epCallback[8] = &USBHAL::EP5_OUT_callback;
+ epCallback[9] = &USBHAL::EP5_IN_callback;
+ epCallback[10] = &USBHAL::EP6_OUT_callback;
+ epCallback[11] = &USBHAL::EP6_IN_callback;
+ epCallback[12] = &USBHAL::EP7_OUT_callback;
+ epCallback[13] = &USBHAL::EP7_IN_callback;
+ epCallback[14] = &USBHAL::EP8_OUT_callback;
+ epCallback[15] = &USBHAL::EP8_IN_callback;
+ epCallback[16] = &USBHAL::EP9_OUT_callback;
+ epCallback[17] = &USBHAL::EP9_IN_callback;
+ epCallback[18] = &USBHAL::EP10_OUT_callback;
+ epCallback[19] = &USBHAL::EP10_IN_callback;
+ epCallback[20] = &USBHAL::EP11_OUT_callback;
+ epCallback[21] = &USBHAL::EP11_IN_callback;
+ epCallback[22] = &USBHAL::EP12_OUT_callback;
+ epCallback[23] = &USBHAL::EP12_IN_callback;
+ epCallback[24] = &USBHAL::EP13_OUT_callback;
+ epCallback[25] = &USBHAL::EP13_IN_callback;
+ epCallback[26] = &USBHAL::EP14_OUT_callback;
+ epCallback[27] = &USBHAL::EP14_IN_callback;
+ epCallback[28] = &USBHAL::EP15_OUT_callback;
+ epCallback[29] = &USBHAL::EP15_IN_callback;
+
+ // Enable power to USB device controller
+ LPC_SC->PCONP |= PCUSB;
+
+ // Enable USB clocks
+ LPC_USB->USBClkCtrl |= DEV_CLK_EN | AHB_CLK_EN | PORT_CLK_EN;
+ while ((LPC_USB->USBClkSt & (DEV_CLK_EN | AHB_CLK_EN | PORT_CLK_EN)) != (DEV_CLK_ON | AHB_CLK_ON | PORT_CLK_EN));
+
+ // Select port USB2
+ LPC_USB->StCtrl |= 3;
+
+
+ // Configure pin P0.31 to be USB2
+ LPC_IOCON->P0_31 &= ~0x07;
+ LPC_IOCON->P0_31 |= 0x01;
+
+ // Disconnect USB device
+ SIEdisconnect();
+
+ // Configure pin P0.14 to be Connect
+ LPC_IOCON->P0_14 &= ~0x07;
+ LPC_IOCON->P0_14 |= 0x03;
+
+ // Connect must be low for at least 2.5uS
+ wait(0.3);
+
+ // Set the maximum packet size for the control endpoints
+ realiseEndpoint(EP0IN, MAX_PACKET_SIZE_EP0, 0);
+ realiseEndpoint(EP0OUT, MAX_PACKET_SIZE_EP0, 0);
+
+ // Attach IRQ
+ instance = this;
+ NVIC_SetVector(USB_IRQn, (uint32_t)&_usbisr);
+
+ // Enable interrupts for device events and EP0
+ LPC_USB->DevIntEn = EP_SLOW | DEV_STAT | FRAME;
+ enableEndpointEvent(EP0IN);
+ enableEndpointEvent(EP0OUT);
+}
+
+USBHAL::~USBHAL(void) {
+ // Ensure device disconnected
+ SIEdisconnect();
+ // Disable USB interrupts
+ NVIC_DisableIRQ(USB_IRQn);
+}
+
+void USBHAL::connect(void) {
+ NVIC_EnableIRQ(USB_IRQn);
+ // Connect USB device
+ SIEconnect();
+}
+
+void USBHAL::disconnect(void) {
+ NVIC_DisableIRQ(USB_IRQn);
+ // Disconnect USB device
+ SIEdisconnect();
+}
+
+void USBHAL::configureDevice(void) {
+ SIEconfigureDevice();
+}
+
+void USBHAL::unconfigureDevice(void) {
+ SIEunconfigureDevice();
+}
+
+void USBHAL::setAddress(uint8_t address) {
+ SIEsetAddress(address);
+}
+
+void USBHAL::EP0setup(uint8_t *buffer) {
+ endpointReadcore(EP0OUT, buffer);
+}
+
+void USBHAL::EP0read(void) {
+ // Not required
+}
+
+void USBHAL::EP0readStage(void) {
+ // Not required
+}
+
+uint32_t USBHAL::EP0getReadResult(uint8_t *buffer) {
+ return endpointReadcore(EP0OUT, buffer);
+}
+
+void USBHAL::EP0write(uint8_t *buffer, uint32_t size) {
+ endpointWritecore(EP0IN, buffer, size);
+}
+
+void USBHAL::EP0getWriteResult(void) {
+ // Not required
+}
+
+void USBHAL::EP0stall(void) {
+ // This will stall both control endpoints
+ stallEndpoint(EP0OUT);
+}
+
+EP_STATUS USBHAL::endpointRead(uint8_t endpoint, uint32_t maximumSize) {
+ return EP_PENDING;
+}
+
+EP_STATUS USBHAL::endpointReadResult(uint8_t endpoint, uint8_t * buffer, uint32_t *bytesRead) {
+
+ //for isochronous endpoint, we don't wait an interrupt
+ if ((endpoint >> 1) % 3 || (endpoint >> 1) == 0) {
+ if (!(epComplete & EP(endpoint)))
+ return EP_PENDING;
+ }
+
+ *bytesRead = endpointReadcore(endpoint, buffer);
+ epComplete &= ~EP(endpoint);
+ return EP_COMPLETED;
+}
+
+EP_STATUS USBHAL::endpointWrite(uint8_t endpoint, uint8_t *data, uint32_t size) {
+ if (getEndpointStallState(endpoint)) {
+ return EP_STALLED;
+ }
+
+ epComplete &= ~EP(endpoint);
+
+ endpointWritecore(endpoint, data, size);
+ return EP_PENDING;
+}
+
+EP_STATUS USBHAL::endpointWriteResult(uint8_t endpoint) {
+ if (epComplete & EP(endpoint)) {
+ epComplete &= ~EP(endpoint);
+ return EP_COMPLETED;
+ }
+
+ return EP_PENDING;
+}
+
+bool USBHAL::realiseEndpoint(uint8_t endpoint, uint32_t maxPacket, uint32_t flags) {
+ // Realise an endpoint
+ LPC_USB->DevIntClr = EP_RLZED;
+ LPC_USB->ReEp |= EP(endpoint);
+ LPC_USB->EpInd = endpoint;
+ LPC_USB->MaxPSize = maxPacket;
+
+ while (!(LPC_USB->DevIntSt & EP_RLZED));
+ LPC_USB->DevIntClr = EP_RLZED;
+
+ // Clear stall state
+ endpointStallState &= ~EP(endpoint);
+
+ enableEndpointEvent(endpoint);
+ return true;
+}
+
+void USBHAL::stallEndpoint(uint8_t endpoint) {
+ // Stall an endpoint
+ if ( (endpoint==EP0IN) || (endpoint==EP0OUT) ) {
+ // Conditionally stall both control endpoints
+ SIEsetEndpointStatus(EP0OUT, SIE_SES_CND_ST);
+ } else {
+ SIEsetEndpointStatus(endpoint, SIE_SES_ST);
+
+ // Update stall state
+ endpointStallState |= EP(endpoint);
+ }
+}
+
+void USBHAL::unstallEndpoint(uint8_t endpoint) {
+ // Unstall an endpoint. The endpoint will also be reinitialised
+ SIEsetEndpointStatus(endpoint, 0);
+
+ // Update stall state
+ endpointStallState &= ~EP(endpoint);
+}
+
+bool USBHAL::getEndpointStallState(uint8_t endpoint) {
+ // Returns true if endpoint stalled
+ return endpointStallState & EP(endpoint);
+}
+
+void USBHAL::remoteWakeup(void) {
+ // Remote wakeup
+ uint8_t status;
+
+ // Enable USB clocks
+ LPC_USB->USBClkCtrl |= DEV_CLK_EN | AHB_CLK_EN;
+ while (LPC_USB->USBClkSt != (DEV_CLK_ON | AHB_CLK_ON));
+
+ status = SIEgetDeviceStatus();
+ SIEsetDeviceStatus(status & ~SIE_DS_SUS);
+}
+
+void USBHAL::_usbisr(void) {
+ instance->usbisr();
+}
+
+
+void USBHAL::usbisr(void) {
+ uint8_t devStat;
+
+ if (LPC_USB->DevIntSt & FRAME) {
+ // Start of frame event
+ SOF(SIEgetFrameNumber());
+ // Clear interrupt status flag
+ LPC_USB->DevIntClr = FRAME;
+ }
+
+ if (LPC_USB->DevIntSt & DEV_STAT) {
+ // Device Status interrupt
+ // Must clear the interrupt status flag before reading the device status from the SIE
+ LPC_USB->DevIntClr = DEV_STAT;
+
+ // Read device status from SIE
+ devStat = SIEgetDeviceStatus();
+ //printf("devStat: %d\r\n", devStat);
+
+ if (devStat & SIE_DS_SUS_CH) {
+ // Suspend status changed
+ if((devStat & SIE_DS_SUS) != 0) {
+ suspendStateChanged(0);
+ }
+ }
+
+ if (devStat & SIE_DS_RST) {
+ // Bus reset
+ if((devStat & SIE_DS_SUS) == 0) {
+ suspendStateChanged(1);
+ }
+ busReset();
+ }
+ }
+
+ if (LPC_USB->DevIntSt & EP_SLOW) {
+ // (Slow) Endpoint Interrupt
+
+ // Process each endpoint interrupt
+ if (LPC_USB->EpIntSt & EP(EP0OUT)) {
+ if (selectEndpointClearInterrupt(EP0OUT) & SIE_SE_STP) {
+ // this is a setup packet
+ EP0setupCallback();
+ } else {
+ EP0out();
+ }
+ LPC_USB->DevIntClr = EP_SLOW;
+ }
+
+ if (LPC_USB->EpIntSt & EP(EP0IN)) {
+ selectEndpointClearInterrupt(EP0IN);
+ LPC_USB->DevIntClr = EP_SLOW;
+ EP0in();
+ }
+
+ for (uint8_t num = 2; num < 16*2; num++) {
+ if (LPC_USB->EpIntSt & EP(num)) {
+ selectEndpointClearInterrupt(num);
+ epComplete |= EP(num);
+ LPC_USB->DevIntClr = EP_SLOW;
+ if ((instance->*(epCallback[num - 2]))()) {
+ epComplete &= ~EP(num);
+ }
+ }
+ }
+ }
+}
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/USBDevice/USBDevice/USBHAL_STM32F4.cpp Fri Aug 29 08:33:17 2014 +0000
@@ -0,0 +1,402 @@
+/* Copyright (c) 2010-2011 mbed.org, MIT License
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy of this software
+* and associated documentation files (the "Software"), to deal in the Software without
+* restriction, including without limitation the rights to use, copy, modify, merge, publish,
+* distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the
+* Software is furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in all copies or
+* substantial portions of the Software.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING
+* BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
+* DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+*/
+
+#if defined(TARGET_STM32F4XX)
+
+#include "USBHAL.h"
+#include "USBRegs_STM32.h"
+#include "pinmap.h"
+
+USBHAL * USBHAL::instance;
+
+static volatile int epComplete = 0;
+
+static uint32_t bufferEnd = 0;
+static const uint32_t rxFifoSize = 512;
+static uint32_t rxFifoCount = 0;
+
+static uint32_t setupBuffer[MAX_PACKET_SIZE_EP0 >> 2];
+
+uint32_t USBHAL::endpointReadcore(uint8_t endpoint, uint8_t *buffer) {
+ return 0;
+}
+
+USBHAL::USBHAL(void) {
+ NVIC_DisableIRQ(OTG_FS_IRQn);
+ epCallback[0] = &USBHAL::EP1_OUT_callback;
+ epCallback[1] = &USBHAL::EP1_IN_callback;
+ epCallback[2] = &USBHAL::EP2_OUT_callback;
+ epCallback[3] = &USBHAL::EP2_IN_callback;
+ epCallback[4] = &USBHAL::EP3_OUT_callback;
+ epCallback[5] = &USBHAL::EP3_IN_callback;
+
+ // Enable power and clocking
+ RCC->AHB1ENR |= RCC_AHB1ENR_GPIOAEN;
+
+ pin_function(PA_8, STM_PIN_DATA(2, 10));
+ pin_function(PA_9, STM_PIN_DATA(0, 0));
+ pin_function(PA_10, STM_PIN_DATA(2, 10));
+ pin_function(PA_11, STM_PIN_DATA(2, 10));
+ pin_function(PA_12, STM_PIN_DATA(2, 10));
+
+ // Set ID pin to open drain with pull-up resistor
+ pin_mode(PA_10, OpenDrain);
+ GPIOA->PUPDR &= ~(0x3 << 20);
+ GPIOA->PUPDR |= 1 << 20;
+
+ // Set VBUS pin to open drain
+ pin_mode(PA_9, OpenDrain);
+
+ RCC->AHB2ENR |= RCC_AHB2ENR_OTGFSEN;
+
+ // Enable interrupts
+ OTG_FS->GREGS.GAHBCFG |= (1 << 0);
+
+ // Turnaround time to maximum value - too small causes packet loss
+ OTG_FS->GREGS.GUSBCFG |= (0xF << 10);
+
+ // Unmask global interrupts
+ OTG_FS->GREGS.GINTMSK |= (1 << 3) | // SOF
+ (1 << 4) | // RX FIFO not empty
+ (1 << 12); // USB reset
+
+ OTG_FS->DREGS.DCFG |= (0x3 << 0) | // Full speed
+ (1 << 2); // Non-zero-length status OUT handshake
+
+ OTG_FS->GREGS.GCCFG |= (1 << 19) | // Enable VBUS sensing
+ (1 << 16); // Power Up
+
+ instance = this;
+ NVIC_SetVector(OTG_FS_IRQn, (uint32_t)&_usbisr);
+ NVIC_SetPriority(OTG_FS_IRQn, 1);
+}
+
+USBHAL::~USBHAL(void) {
+}
+
+void USBHAL::connect(void) {
+ NVIC_EnableIRQ(OTG_FS_IRQn);
+}
+
+void USBHAL::disconnect(void) {
+ NVIC_DisableIRQ(OTG_FS_IRQn);
+}
+
+void USBHAL::configureDevice(void) {
+ // Not needed
+}
+
+void USBHAL::unconfigureDevice(void) {
+ // Not needed
+}
+
+void USBHAL::setAddress(uint8_t address) {
+ OTG_FS->DREGS.DCFG |= (address << 4);
+ EP0write(0, 0);
+}
+
+bool USBHAL::realiseEndpoint(uint8_t endpoint, uint32_t maxPacket,
+ uint32_t flags) {
+ uint32_t epIndex = endpoint >> 1;
+
+ uint32_t type;
+ switch (endpoint) {
+ case EP0IN:
+ case EP0OUT:
+ type = 0;
+ break;
+ case EPISO_IN:
+ case EPISO_OUT:
+ type = 1;
+ case EPBULK_IN:
+ case EPBULK_OUT:
+ type = 2;
+ break;
+ case EPINT_IN:
+ case EPINT_OUT:
+ type = 3;
+ break;
+ }
+
+ // Generic in or out EP controls
+ uint32_t control = (maxPacket << 0) | // Packet size
+ (1 << 15) | // Active endpoint
+ (type << 18); // Endpoint type
+
+ if (endpoint & 0x1) { // In Endpoint
+ // Set up the Tx FIFO
+ if (endpoint == EP0IN) {
+ OTG_FS->GREGS.DIEPTXF0_HNPTXFSIZ = ((maxPacket >> 2) << 16) |
+ (bufferEnd << 0);
+ }
+ else {
+ OTG_FS->GREGS.DIEPTXF[epIndex - 1] = ((maxPacket >> 2) << 16) |
+ (bufferEnd << 0);
+ }
+ bufferEnd += maxPacket >> 2;
+
+ // Set the In EP specific control settings
+ if (endpoint != EP0IN) {
+ control |= (1 << 28); // SD0PID
+ }
+
+ control |= (epIndex << 22) | // TxFIFO index
+ (1 << 27); // SNAK
+ OTG_FS->INEP_REGS[epIndex].DIEPCTL = control;
+
+ // Unmask the interrupt
+ OTG_FS->DREGS.DAINTMSK |= (1 << epIndex);
+ }
+ else { // Out endpoint
+ // Set the out EP specific control settings
+ control |= (1 << 26); // CNAK
+ OTG_FS->OUTEP_REGS[epIndex].DOEPCTL = control;
+
+ // Unmask the interrupt
+ OTG_FS->DREGS.DAINTMSK |= (1 << (epIndex + 16));
+ }
+ return true;
+}
+
+// read setup packet
+void USBHAL::EP0setup(uint8_t *buffer) {
+ memcpy(buffer, setupBuffer, MAX_PACKET_SIZE_EP0);
+}
+
+void USBHAL::EP0readStage(void) {
+}
+
+void USBHAL::EP0read(void) {
+}
+
+uint32_t USBHAL::EP0getReadResult(uint8_t *buffer) {
+ uint32_t* buffer32 = (uint32_t *) buffer;
+ uint32_t length = rxFifoCount;
+ for (uint32_t i = 0; i < length; i += 4) {
+ buffer32[i >> 2] = OTG_FS->FIFO[0][0];
+ }
+
+ rxFifoCount = 0;
+ return length;
+}
+
+void USBHAL::EP0write(uint8_t *buffer, uint32_t size) {
+ endpointWrite(0, buffer, size);
+}
+
+void USBHAL::EP0getWriteResult(void) {
+}
+
+void USBHAL::EP0stall(void) {
+ // If we stall the out endpoint here then we have problems transferring
+ // and setup requests after the (stalled) get device qualifier requests.
+ // TODO: Find out if this is correct behavior, or whether we are doing
+ // something else wrong
+ stallEndpoint(EP0IN);
+// stallEndpoint(EP0OUT);
+}
+
+EP_STATUS USBHAL::endpointRead(uint8_t endpoint, uint32_t maximumSize) {
+ uint32_t epIndex = endpoint >> 1;
+ uint32_t size = (1 << 19) | // 1 packet
+ (maximumSize << 0); // Packet size
+// if (endpoint == EP0OUT) {
+ size |= (1 << 29); // 1 setup packet
+// }
+ OTG_FS->OUTEP_REGS[epIndex].DOEPTSIZ = size;
+ OTG_FS->OUTEP_REGS[epIndex].DOEPCTL |= (1 << 31) | // Enable endpoint
+ (1 << 26); // Clear NAK
+
+ epComplete &= ~(1 << endpoint);
+ return EP_PENDING;
+}
+
+EP_STATUS USBHAL::endpointReadResult(uint8_t endpoint, uint8_t * buffer, uint32_t *bytesRead) {
+ if (!(epComplete & (1 << endpoint))) {
+ return EP_PENDING;
+ }
+
+ uint32_t* buffer32 = (uint32_t *) buffer;
+ uint32_t length = rxFifoCount;
+ for (uint32_t i = 0; i < length; i += 4) {
+ buffer32[i >> 2] = OTG_FS->FIFO[endpoint >> 1][0];
+ }
+ rxFifoCount = 0;
+ *bytesRead = length;
+ return EP_COMPLETED;
+}
+
+EP_STATUS USBHAL::endpointWrite(uint8_t endpoint, uint8_t *data, uint32_t size) {
+ uint32_t epIndex = endpoint >> 1;
+ OTG_FS->INEP_REGS[epIndex].DIEPTSIZ = (1 << 19) | // 1 packet
+ (size << 0); // Size of packet
+ OTG_FS->INEP_REGS[epIndex].DIEPCTL |= (1 << 31) | // Enable endpoint
+ (1 << 26); // CNAK
+ OTG_FS->DREGS.DIEPEMPMSK = (1 << epIndex);
+
+ while ((OTG_FS->INEP_REGS[epIndex].DTXFSTS & 0XFFFF) < ((size + 3) >> 2));
+
+ for (uint32_t i=0; i<(size + 3) >> 2; i++, data+=4) {
+ OTG_FS->FIFO[epIndex][0] = *(uint32_t *)data;
+ }
+
+ epComplete &= ~(1 << endpoint);
+
+ return EP_PENDING;
+}
+
+EP_STATUS USBHAL::endpointWriteResult(uint8_t endpoint) {
+ if (epComplete & (1 << endpoint)) {
+ epComplete &= ~(1 << endpoint);
+ return EP_COMPLETED;
+ }
+
+ return EP_PENDING;
+}
+
+void USBHAL::stallEndpoint(uint8_t endpoint) {
+ if (endpoint & 0x1) { // In EP
+ OTG_FS->INEP_REGS[endpoint >> 1].DIEPCTL |= (1 << 30) | // Disable
+ (1 << 21); // Stall
+ }
+ else { // Out EP
+ OTG_FS->DREGS.DCTL |= (1 << 9); // Set global out NAK
+ OTG_FS->OUTEP_REGS[endpoint >> 1].DOEPCTL |= (1 << 30) | // Disable
+ (1 << 21); // Stall
+ }
+}
+
+void USBHAL::unstallEndpoint(uint8_t endpoint) {
+
+}
+
+bool USBHAL::getEndpointStallState(uint8_t endpoint) {
+ return false;
+}
+
+void USBHAL::remoteWakeup(void) {
+}
+
+
+void USBHAL::_usbisr(void) {
+ instance->usbisr();
+}
+
+
+void USBHAL::usbisr(void) {
+ if (OTG_FS->GREGS.GINTSTS & (1 << 12)) { // USB Reset
+ // Set SNAK bits
+ OTG_FS->OUTEP_REGS[0].DOEPCTL |= (1 << 27);
+ OTG_FS->OUTEP_REGS[1].DOEPCTL |= (1 << 27);
+ OTG_FS->OUTEP_REGS[2].DOEPCTL |= (1 << 27);
+ OTG_FS->OUTEP_REGS[3].DOEPCTL |= (1 << 27);
+
+ OTG_FS->DREGS.DIEPMSK = (1 << 0);
+
+ bufferEnd = 0;
+
+ // Set the receive FIFO size
+ OTG_FS->GREGS.GRXFSIZ = rxFifoSize >> 2;
+ bufferEnd += rxFifoSize >> 2;
+
+ // Create the endpoints, and wait for setup packets on out EP0
+ realiseEndpoint(EP0IN, MAX_PACKET_SIZE_EP0, 0);
+ realiseEndpoint(EP0OUT, MAX_PACKET_SIZE_EP0, 0);
+ endpointRead(EP0OUT, MAX_PACKET_SIZE_EP0);
+
+ OTG_FS->GREGS.GINTSTS = (1 << 12);
+ }
+
+ if (OTG_FS->GREGS.GINTSTS & (1 << 4)) { // RX FIFO not empty
+ uint32_t status = OTG_FS->GREGS.GRXSTSP;
+
+ uint32_t endpoint = (status & 0xF) << 1;
+ uint32_t length = (status >> 4) & 0x7FF;
+ uint32_t type = (status >> 17) & 0xF;
+
+ rxFifoCount = length;
+
+ if (type == 0x6) {
+ // Setup packet
+ for (uint32_t i=0; i<length; i+=4) {
+ setupBuffer[i >> 2] = OTG_FS->FIFO[0][i >> 2];
+ }
+ rxFifoCount = 0;
+ }
+
+ if (type == 0x4) {
+ // Setup complete
+ EP0setupCallback();
+ endpointRead(EP0OUT, MAX_PACKET_SIZE_EP0);
+ }
+
+ if (type == 0x2) {
+ // Out packet
+ if (endpoint == EP0OUT) {
+ EP0out();
+ }
+ else {
+ epComplete |= (1 << endpoint);
+ if ((instance->*(epCallback[endpoint - 2]))()) {
+ epComplete &= (1 << endpoint);
+ }
+ }
+ }
+
+ for (uint32_t i=0; i<rxFifoCount; i+=4) {
+ (void) OTG_FS->FIFO[0][0];
+ }
+ OTG_FS->GREGS.GINTSTS = (1 << 4);
+ }
+
+ if (OTG_FS->GREGS.GINTSTS & (1 << 18)) { // In endpoint interrupt
+ // Loop through the in endpoints
+ for (uint32_t i=0; i<4; i++) {
+ if (OTG_FS->DREGS.DAINT & (1 << i)) { // Interrupt is on endpoint
+
+ if (OTG_FS->INEP_REGS[i].DIEPINT & (1 << 7)) {// Tx FIFO empty
+ // If the Tx FIFO is empty on EP0 we need to send a further
+ // packet, so call EP0in()
+ if (i == 0) {
+ EP0in();
+ }
+ // Clear the interrupt
+ OTG_FS->INEP_REGS[i].DIEPINT = (1 << 7);
+ // Stop firing Tx empty interrupts
+ // Will get turned on again if another write is called
+ OTG_FS->DREGS.DIEPEMPMSK &= ~(1 << i);
+ }
+
+ // If the transfer is complete
+ if (OTG_FS->INEP_REGS[i].DIEPINT & (1 << 0)) { // Tx Complete
+ epComplete |= (1 << (1 + (i << 1)));
+ OTG_FS->INEP_REGS[i].DIEPINT = (1 << 0);
+ }
+ }
+ }
+ OTG_FS->GREGS.GINTSTS = (1 << 18);
+ }
+
+ if (OTG_FS->GREGS.GINTSTS & (1 << 3)) { // Start of frame
+ SOF((OTG_FS->GREGS.GRXSTSR >> 17) & 0xF);
+ OTG_FS->GREGS.GINTSTS = (1 << 3);
+ }
+}
+
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/USBDevice/USBDevice/USBRegs_STM32.h Fri Aug 29 08:33:17 2014 +0000
@@ -0,0 +1,149 @@
+/**
+ ******************************************************************************
+ * @file usb_regs.h
+ * @author MCD Application Team
+ * @version V2.1.0
+ * @date 19-March-2012
+ * @brief hardware registers
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT 2012 STMicroelectronics</center></h2>
+ *
+ * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
+ * You may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at:
+ *
+ * http://www.st.com/software_license_agreement_liberty_v2
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ ******************************************************************************
+ */
+
+#ifndef __USB_OTG_REGS_H__
+#define __USB_OTG_REGS_H__
+
+typedef struct //000h
+{
+ __IO uint32_t GOTGCTL; /* USB_OTG Control and Status Register 000h*/
+ __IO uint32_t GOTGINT; /* USB_OTG Interrupt Register 004h*/
+ __IO uint32_t GAHBCFG; /* Core AHB Configuration Register 008h*/
+ __IO uint32_t GUSBCFG; /* Core USB Configuration Register 00Ch*/
+ __IO uint32_t GRSTCTL; /* Core Reset Register 010h*/
+ __IO uint32_t GINTSTS; /* Core Interrupt Register 014h*/
+ __IO uint32_t GINTMSK; /* Core Interrupt Mask Register 018h*/
+ __IO uint32_t GRXSTSR; /* Receive Sts Q Read Register 01Ch*/
+ __IO uint32_t GRXSTSP; /* Receive Sts Q Read & POP Register 020h*/
+ __IO uint32_t GRXFSIZ; /* Receive FIFO Size Register 024h*/
+ __IO uint32_t DIEPTXF0_HNPTXFSIZ; /* EP0 / Non Periodic Tx FIFO Size Register 028h*/
+ __IO uint32_t HNPTXSTS; /* Non Periodic Tx FIFO/Queue Sts reg 02Ch*/
+ uint32_t Reserved30[2]; /* Reserved 030h*/
+ __IO uint32_t GCCFG; /* General Purpose IO Register 038h*/
+ __IO uint32_t CID; /* User ID Register 03Ch*/
+ uint32_t Reserved40[48]; /* Reserved 040h-0FFh*/
+ __IO uint32_t HPTXFSIZ; /* Host Periodic Tx FIFO Size Reg 100h*/
+ __IO uint32_t DIEPTXF[3];/* dev Periodic Transmit FIFO */
+}
+USB_OTG_GREGS;
+
+typedef struct // 800h
+{
+ __IO uint32_t DCFG; /* dev Configuration Register 800h*/
+ __IO uint32_t DCTL; /* dev Control Register 804h*/
+ __IO uint32_t DSTS; /* dev Status Register (RO) 808h*/
+ uint32_t Reserved0C; /* Reserved 80Ch*/
+ __IO uint32_t DIEPMSK; /* dev IN Endpoint Mask 810h*/
+ __IO uint32_t DOEPMSK; /* dev OUT Endpoint Mask 814h*/
+ __IO uint32_t DAINT; /* dev All Endpoints Itr Reg 818h*/
+ __IO uint32_t DAINTMSK; /* dev All Endpoints Itr Mask 81Ch*/
+ uint32_t Reserved20; /* Reserved 820h*/
+ uint32_t Reserved9; /* Reserved 824h*/
+ __IO uint32_t DVBUSDIS; /* dev VBUS discharge Register 828h*/
+ __IO uint32_t DVBUSPULSE; /* dev VBUS Pulse Register 82Ch*/
+ __IO uint32_t DTHRCTL; /* dev thr 830h*/
+ __IO uint32_t DIEPEMPMSK; /* dev empty msk 834h*/
+}
+USB_OTG_DREGS;
+
+typedef struct
+{
+ __IO uint32_t DIEPCTL; /* dev IN Endpoint Control Reg 900h + (ep_num * 20h) + 00h*/
+ uint32_t Reserved04; /* Reserved 900h + (ep_num * 20h) + 04h*/
+ __IO uint32_t DIEPINT; /* dev IN Endpoint Itr Reg 900h + (ep_num * 20h) + 08h*/
+ uint32_t Reserved0C; /* Reserved 900h + (ep_num * 20h) + 0Ch*/
+ __IO uint32_t DIEPTSIZ; /* IN Endpoint Txfer Size 900h + (ep_num * 20h) + 10h*/
+ uint32_t Reserved14;
+ __IO uint32_t DTXFSTS;/*IN Endpoint Tx FIFO Status Reg 900h + (ep_num * 20h) + 18h*/
+ uint32_t Reserved1C; /* Reserved 900h+(ep_num*20h)+1Ch-900h+ (ep_num * 20h) + 1Ch*/
+}
+USB_OTG_INEPREGS;
+
+typedef struct
+{
+ __IO uint32_t DOEPCTL; /* dev OUT Endpoint Control Reg B00h + (ep_num * 20h) + 00h*/
+ uint32_t Reserved04; /* Reserved B00h + (ep_num * 20h) + 04h*/
+ __IO uint32_t DOEPINT; /* dev OUT Endpoint Itr Reg B00h + (ep_num * 20h) + 08h*/
+ uint32_t Reserved0C; /* Reserved B00h + (ep_num * 20h) + 0Ch*/
+ __IO uint32_t DOEPTSIZ; /* dev OUT Endpoint Txfer Size B00h + (ep_num * 20h) + 10h*/
+ uint32_t Reserved14[3];
+}
+USB_OTG_OUTEPREGS;
+
+typedef struct
+{
+ __IO uint32_t HCFG; /* Host Configuration Register 400h*/
+ __IO uint32_t HFIR; /* Host Frame Interval Register 404h*/
+ __IO uint32_t HFNUM; /* Host Frame Nbr/Frame Remaining 408h*/
+ uint32_t Reserved40C; /* Reserved 40Ch*/
+ __IO uint32_t HPTXSTS; /* Host Periodic Tx FIFO/ Queue Status 410h*/
+ __IO uint32_t HAINT; /* Host All Channels Interrupt Register 414h*/
+ __IO uint32_t HAINTMSK; /* Host All Channels Interrupt Mask 418h*/
+}
+USB_OTG_HREGS;
+
+typedef struct
+{
+ __IO uint32_t HCCHAR;
+ __IO uint32_t HCSPLT;
+ __IO uint32_t HCINT;
+ __IO uint32_t HCINTMSK;
+ __IO uint32_t HCTSIZ;
+ uint32_t Reserved[3];
+}
+USB_OTG_HC_REGS;
+
+typedef struct
+{
+ USB_OTG_GREGS GREGS;
+ uint32_t RESERVED0[188];
+ USB_OTG_HREGS HREGS;
+ uint32_t RESERVED1[9];
+ __IO uint32_t HPRT;
+ uint32_t RESERVED2[47];
+ USB_OTG_HC_REGS HC_REGS[8];
+ uint32_t RESERVED3[128];
+ USB_OTG_DREGS DREGS;
+ uint32_t RESERVED4[50];
+ USB_OTG_INEPREGS INEP_REGS[4];
+ uint32_t RESERVED5[96];
+ USB_OTG_OUTEPREGS OUTEP_REGS[4];
+ uint32_t RESERVED6[160];
+ __IO uint32_t PCGCCTL;
+ uint32_t RESERVED7[127];
+ __IO uint32_t FIFO[4][1024];
+}
+USB_OTG_CORE_REGS;
+
+
+#define OTG_FS_BASE (AHB2PERIPH_BASE + 0x0000)
+#define OTG_FS ((USB_OTG_CORE_REGS *) OTG_FS_BASE)
+
+#endif //__USB_OTG_REGS_H__
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/USBDevice/USBHID/USBHID.cpp Fri Aug 29 08:33:17 2014 +0000
@@ -0,0 +1,276 @@
+/* Copyright (c) 2010-2011 mbed.org, MIT License
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy of this software
+* and associated documentation files (the "Software"), to deal in the Software without
+* restriction, including without limitation the rights to use, copy, modify, merge, publish,
+* distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the
+* Software is furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in all copies or
+* substantial portions of the Software.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING
+* BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
+* DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+*/
+
+#include "stdint.h"
+#include "USBHAL.h"
+#include "USBHID.h"
+
+
+USBHID::USBHID(uint8_t output_report_length, uint8_t input_report_length, uint16_t vendor_id, uint16_t product_id, uint16_t product_release, bool connect): USBDevice(vendor_id, product_id, product_release)
+{
+ output_length = output_report_length;
+ input_length = input_report_length;
+ if(connect) {
+ USBDevice::connect();
+ }
+}
+
+
+bool USBHID::send(HID_REPORT *report)
+{
+ return write(EPINT_IN, report->data, report->length, MAX_HID_REPORT_SIZE);
+}
+
+bool USBHID::sendNB(HID_REPORT *report)
+{
+ return writeNB(EPINT_IN, report->data, report->length, MAX_HID_REPORT_SIZE);
+}
+
+
+bool USBHID::read(HID_REPORT *report)
+{
+ uint32_t bytesRead = 0;
+ bool result;
+ result = USBDevice::readEP(EPINT_OUT, report->data, &bytesRead, MAX_HID_REPORT_SIZE);
+ if(!readStart(EPINT_OUT, MAX_HID_REPORT_SIZE))
+ return false;
+ report->length = bytesRead;
+ return result;
+}
+
+
+bool USBHID::readNB(HID_REPORT *report)
+{
+ uint32_t bytesRead = 0;
+ bool result;
+ result = USBDevice::readEP_NB(EPINT_OUT, report->data, &bytesRead, MAX_HID_REPORT_SIZE);
+ // if readEP_NB did not succeed, does not issue a readStart
+ if (!result)
+ return false;
+ report->length = bytesRead;
+ if(!readStart(EPINT_OUT, MAX_HID_REPORT_SIZE))
+ return false;
+ return result;
+}
+
+
+uint16_t USBHID::reportDescLength() {
+ reportDesc();
+ return reportLength;
+}
+
+
+
+//
+// Route callbacks from lower layers to class(es)
+//
+
+
+// Called in ISR context
+// Called by USBDevice on Endpoint0 request
+// This is used to handle extensions to standard requests
+// and class specific requests
+// Return true if class handles this request
+bool USBHID::USBCallback_request() {
+ bool success = false;
+ CONTROL_TRANSFER * transfer = getTransferPtr();
+ uint8_t *hidDescriptor;
+
+ // Process additional standard requests
+
+ if ((transfer->setup.bmRequestType.Type == STANDARD_TYPE))
+ {
+ switch (transfer->setup.bRequest)
+ {
+ case GET_DESCRIPTOR:
+ switch (DESCRIPTOR_TYPE(transfer->setup.wValue))
+ {
+ case REPORT_DESCRIPTOR:
+ if ((reportDesc() != NULL) \
+ && (reportDescLength() != 0))
+ {
+ transfer->remaining = reportDescLength();
+ transfer->ptr = reportDesc();
+ transfer->direction = DEVICE_TO_HOST;
+ success = true;
+ }
+ break;
+ case HID_DESCRIPTOR:
+ // Find the HID descriptor, after the configuration descriptor
+ hidDescriptor = findDescriptor(HID_DESCRIPTOR);
+ if (hidDescriptor != NULL)
+ {
+ transfer->remaining = HID_DESCRIPTOR_LENGTH;
+ transfer->ptr = hidDescriptor;
+ transfer->direction = DEVICE_TO_HOST;
+ success = true;
+ }
+ break;
+
+ default:
+ break;
+ }
+ break;
+ default:
+ break;
+ }
+ }
+
+ // Process class-specific requests
+
+ if (transfer->setup.bmRequestType.Type == CLASS_TYPE)
+ {
+ switch (transfer->setup.bRequest)
+ {
+ case SET_REPORT:
+ // First byte will be used for report ID
+ outputReport.data[0] = transfer->setup.wValue & 0xff;
+ outputReport.length = transfer->setup.wLength + 1;
+
+ transfer->remaining = sizeof(outputReport.data) - 1;
+ transfer->ptr = &outputReport.data[1];
+ transfer->direction = HOST_TO_DEVICE;
+ transfer->notify = true;
+ success = true;
+ default:
+ break;
+ }
+ }
+
+ return success;
+}
+
+
+#define DEFAULT_CONFIGURATION (1)
+
+
+// Called in ISR context
+// Set configuration. Return false if the
+// configuration is not supported
+bool USBHID::USBCallback_setConfiguration(uint8_t configuration) {
+ if (configuration != DEFAULT_CONFIGURATION) {
+ return false;
+ }
+
+ // Configure endpoints > 0
+ addEndpoint(EPINT_IN, MAX_PACKET_SIZE_EPINT);
+ addEndpoint(EPINT_OUT, MAX_PACKET_SIZE_EPINT);
+
+ // We activate the endpoint to be able to recceive data
+ readStart(EPINT_OUT, MAX_PACKET_SIZE_EPINT);
+ return true;
+}
+
+
+uint8_t * USBHID::stringIinterfaceDesc() {
+ static uint8_t stringIinterfaceDescriptor[] = {
+ 0x08, //bLength
+ STRING_DESCRIPTOR, //bDescriptorType 0x03
+ 'H',0,'I',0,'D',0, //bString iInterface - HID
+ };
+ return stringIinterfaceDescriptor;
+}
+
+uint8_t * USBHID::stringIproductDesc() {
+ static uint8_t stringIproductDescriptor[] = {
+ 0x16, //bLength
+ STRING_DESCRIPTOR, //bDescriptorType 0x03
+ 'H',0,'I',0,'D',0,' ',0,'D',0,'E',0,'V',0,'I',0,'C',0,'E',0 //bString iProduct - HID device
+ };
+ return stringIproductDescriptor;
+}
+
+
+
+uint8_t * USBHID::reportDesc() {
+ static uint8_t reportDescriptor[] = {
+ 0x06, LSB(0xFFAB), MSB(0xFFAB),
+ 0x0A, LSB(0x0200), MSB(0x0200),
+ 0xA1, 0x01, // Collection 0x01
+ 0x75, 0x08, // report size = 8 bits
+ 0x15, 0x00, // logical minimum = 0
+ 0x26, 0xFF, 0x00, // logical maximum = 255
+ 0x95, input_length, // report count
+ 0x09, 0x01, // usage
+ 0x81, 0x02, // Input (array)
+ 0x95, output_length,// report count
+ 0x09, 0x02, // usage
+ 0x91, 0x02, // Output (array)
+ 0xC0 // end collection
+
+ };
+ reportLength = sizeof(reportDescriptor);
+ return reportDescriptor;
+}
+
+#define DEFAULT_CONFIGURATION (1)
+#define TOTAL_DESCRIPTOR_LENGTH ((1 * CONFIGURATION_DESCRIPTOR_LENGTH) \
+ + (1 * INTERFACE_DESCRIPTOR_LENGTH) \
+ + (1 * HID_DESCRIPTOR_LENGTH) \
+ + (2 * ENDPOINT_DESCRIPTOR_LENGTH))
+
+uint8_t * USBHID::configurationDesc() {
+ static uint8_t configurationDescriptor[] = {
+ CONFIGURATION_DESCRIPTOR_LENGTH,// bLength
+ CONFIGURATION_DESCRIPTOR, // bDescriptorType
+ LSB(TOTAL_DESCRIPTOR_LENGTH), // wTotalLength (LSB)
+ MSB(TOTAL_DESCRIPTOR_LENGTH), // wTotalLength (MSB)
+ 0x01, // bNumInterfaces
+ DEFAULT_CONFIGURATION, // bConfigurationValue
+ 0x00, // iConfiguration
+ C_RESERVED | C_SELF_POWERED, // bmAttributes
+ C_POWER(0), // bMaxPower
+
+ INTERFACE_DESCRIPTOR_LENGTH, // bLength
+ INTERFACE_DESCRIPTOR, // bDescriptorType
+ 0x00, // bInterfaceNumber
+ 0x00, // bAlternateSetting
+ 0x02, // bNumEndpoints
+ HID_CLASS, // bInterfaceClass
+ HID_SUBCLASS_NONE, // bInterfaceSubClass
+ HID_PROTOCOL_NONE, // bInterfaceProtocol
+ 0x00, // iInterface
+
+ HID_DESCRIPTOR_LENGTH, // bLength
+ HID_DESCRIPTOR, // bDescriptorType
+ LSB(HID_VERSION_1_11), // bcdHID (LSB)
+ MSB(HID_VERSION_1_11), // bcdHID (MSB)
+ 0x00, // bCountryCode
+ 0x01, // bNumDescriptors
+ REPORT_DESCRIPTOR, // bDescriptorType
+ (uint8_t)(LSB(this->reportDescLength())), // wDescriptorLength (LSB)
+ (uint8_t)(MSB(this->reportDescLength())), // wDescriptorLength (MSB)
+
+ ENDPOINT_DESCRIPTOR_LENGTH, // bLength
+ ENDPOINT_DESCRIPTOR, // bDescriptorType
+ PHY_TO_DESC(EPINT_IN), // bEndpointAddress
+ E_INTERRUPT, // bmAttributes
+ LSB(MAX_PACKET_SIZE_EPINT), // wMaxPacketSize (LSB)
+ MSB(MAX_PACKET_SIZE_EPINT), // wMaxPacketSize (MSB)
+ 1, // bInterval (milliseconds)
+
+ ENDPOINT_DESCRIPTOR_LENGTH, // bLength
+ ENDPOINT_DESCRIPTOR, // bDescriptorType
+ PHY_TO_DESC(EPINT_OUT), // bEndpointAddress
+ E_INTERRUPT, // bmAttributes
+ LSB(MAX_PACKET_SIZE_EPINT), // wMaxPacketSize (LSB)
+ MSB(MAX_PACKET_SIZE_EPINT), // wMaxPacketSize (MSB)
+ 1, // bInterval (milliseconds)
+ };
+ return configurationDescriptor;
+}
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/USBDevice/USBHID/USBHID.h Fri Aug 29 08:33:17 2014 +0000
@@ -0,0 +1,172 @@
+/* Copyright (c) 2010-2011 mbed.org, MIT License
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy of this software
+* and associated documentation files (the "Software"), to deal in the Software without
+* restriction, including without limitation the rights to use, copy, modify, merge, publish,
+* distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the
+* Software is furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in all copies or
+* substantial portions of the Software.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING
+* BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
+* DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+*/
+
+#ifndef USB_HID_H
+#define USB_HID_H
+
+/* These headers are included for child class. */
+#include "USBEndpoints.h"
+#include "USBDescriptor.h"
+#include "USBDevice_Types.h"
+
+#include "USBHID_Types.h"
+#include "USBDevice.h"
+
+
+/**
+ * USBHID example
+ * @code
+ * #include "mbed.h"
+ * #include "USBHID.h"
+ *
+ * USBHID hid;
+ * HID_REPORT recv;
+ * BusOut leds(LED1,LED2,LED3,LED4);
+ *
+ * int main(void) {
+ * while (1) {
+ * hid.read(&recv);
+ * leds = recv.data[0];
+ * }
+ * }
+ * @endcode
+ */
+
+class USBHID: public USBDevice {
+public:
+
+ /**
+ * Constructor
+ *
+ * @param output_report_length Maximum length of a sent report (up to 64 bytes) (default: 64 bytes)
+ * @param input_report_length Maximum length of a received report (up to 64 bytes) (default: 64 bytes)
+ * @param vendor_id Your vendor_id
+ * @param product_id Your product_id
+ * @param product_release Your preoduct_release
+ * @param connect Connect the device
+ */
+ USBHID(uint8_t output_report_length = 64, uint8_t input_report_length = 64, uint16_t vendor_id = 0x1234, uint16_t product_id = 0x0006, uint16_t product_release = 0x0001, bool connect = true);
+
+
+ /**
+ * Send a Report. warning: blocking
+ *
+ * @param report Report which will be sent (a report is defined by all data and the length)
+ * @returns true if successful
+ */
+ bool send(HID_REPORT *report);
+
+
+ /**
+ * Send a Report. warning: non blocking
+ *
+ * @param report Report which will be sent (a report is defined by all data and the length)
+ * @returns true if successful
+ */
+ bool sendNB(HID_REPORT *report);
+
+ /**
+ * Read a report: blocking
+ *
+ * @param report pointer to the report to fill
+ * @returns true if successful
+ */
+ bool read(HID_REPORT * report);
+
+ /**
+ * Read a report: non blocking
+ *
+ * @param report pointer to the report to fill
+ * @returns true if successful
+ */
+ bool readNB(HID_REPORT * report);
+
+protected:
+ uint16_t reportLength;
+
+ /*
+ * Get the Report descriptor
+ *
+ * @returns pointer to the report descriptor
+ */
+ virtual uint8_t * reportDesc();
+
+ /*
+ * Get the length of the report descriptor
+ *
+ * @returns the length of the report descriptor
+ */
+ virtual uint16_t reportDescLength();
+
+ /*
+ * Get string product descriptor
+ *
+ * @returns pointer to the string product descriptor
+ */
+ virtual uint8_t * stringIproductDesc();
+
+ /*
+ * Get string interface descriptor
+ *
+ * @returns pointer to the string interface descriptor
+ */
+ virtual uint8_t * stringIinterfaceDesc();
+
+ /*
+ * Get configuration descriptor
+ *
+ * @returns pointer to the configuration descriptor
+ */
+ virtual uint8_t * configurationDesc();
+
+
+ /*
+ * HID Report received by SET_REPORT request. Warning: Called in ISR context
+ * First byte of data will be the report ID
+ *
+ * @param report Data and length received
+ */
+ virtual void HID_callbackSetReport(HID_REPORT *report){};
+
+
+ /*
+ * Called by USBDevice on Endpoint0 request. Warning: Called in ISR context
+ * This is used to handle extensions to standard requests
+ * and class specific requests
+ *
+ * @returns true if class handles this request
+ */
+ virtual bool USBCallback_request();
+
+
+ /*
+ * Called by USBDevice layer. Set configuration of the device.
+ * For instance, you can add all endpoints that you need on this function.
+ *
+ * @param configuration Number of the configuration
+ * @returns true if class handles this request
+ */
+ virtual bool USBCallback_setConfiguration(uint8_t configuration);
+
+private:
+ HID_REPORT outputReport;
+ uint8_t output_length;
+ uint8_t input_length;
+};
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/USBDevice/USBHID/USBHID_Types.h Fri Aug 29 08:33:17 2014 +0000
@@ -0,0 +1,91 @@
+/* Copyright (c) 2010-2011 mbed.org, MIT License
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy of this software
+* and associated documentation files (the "Software"), to deal in the Software without
+* restriction, including without limitation the rights to use, copy, modify, merge, publish,
+* distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the
+* Software is furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in all copies or
+* substantial portions of the Software.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING
+* BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
+* DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+*/
+
+#ifndef USBCLASS_HID_TYPES
+#define USBCLASS_HID_TYPES
+
+#include <stdint.h>
+
+/* */
+#define HID_VERSION_1_11 (0x0111)
+
+/* HID Class */
+#define HID_CLASS (3)
+#define HID_SUBCLASS_NONE (0)
+#define HID_PROTOCOL_NONE (0)
+
+/* Descriptors */
+#define HID_DESCRIPTOR (33)
+#define HID_DESCRIPTOR_LENGTH (0x09)
+#define REPORT_DESCRIPTOR (34)
+
+/* Class requests */
+#define GET_REPORT (0x1)
+#define GET_IDLE (0x2)
+#define SET_REPORT (0x9)
+#define SET_IDLE (0xa)
+
+/* HID Class Report Descriptor */
+/* Short items: size is 0, 1, 2 or 3 specifying 0, 1, 2 or 4 (four) bytes */
+/* of data as per HID Class standard */
+
+/* Main items */
+#define INPUT(size) (0x80 | size)
+#define OUTPUT(size) (0x90 | size)
+#define FEATURE(size) (0xb0 | size)
+#define COLLECTION(size) (0xa0 | size)
+#define END_COLLECTION(size) (0xc0 | size)
+
+/* Global items */
+#define USAGE_PAGE(size) (0x04 | size)
+#define LOGICAL_MINIMUM(size) (0x14 | size)
+#define LOGICAL_MAXIMUM(size) (0x24 | size)
+#define PHYSICAL_MINIMUM(size) (0x34 | size)
+#define PHYSICAL_MAXIMUM(size) (0x44 | size)
+#define UNIT_EXPONENT(size) (0x54 | size)
+#define UNIT(size) (0x64 | size)
+#define REPORT_SIZE(size) (0x74 | size)
+#define REPORT_ID(size) (0x84 | size)
+#define REPORT_COUNT(size) (0x94 | size)
+#define PUSH(size) (0xa4 | size)
+#define POP(size) (0xb4 | size)
+
+/* Local items */
+#define USAGE(size) (0x08 | size)
+#define USAGE_MINIMUM(size) (0x18 | size)
+#define USAGE_MAXIMUM(size) (0x28 | size)
+#define DESIGNATOR_INDEX(size) (0x38 | size)
+#define DESIGNATOR_MINIMUM(size) (0x48 | size)
+#define DESIGNATOR_MAXIMUM(size) (0x58 | size)
+#define STRING_INDEX(size) (0x78 | size)
+#define STRING_MINIMUM(size) (0x88 | size)
+#define STRING_MAXIMUM(size) (0x98 | size)
+#define DELIMITER(size) (0xa8 | size)
+
+/* HID Report */
+/* Where report IDs are used the first byte of 'data' will be the */
+/* report ID and 'length' will include this report ID byte. */
+
+#define MAX_HID_REPORT_SIZE (64)
+
+typedef struct {
+ uint32_t length;
+ uint8_t data[MAX_HID_REPORT_SIZE];
+} HID_REPORT;
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/USBDevice/USBHID/USBKeyboard.cpp Fri Aug 29 08:33:17 2014 +0000
@@ -0,0 +1,553 @@
+/* Copyright (c) 2010-2011 mbed.org, MIT License
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy of this software
+* and associated documentation files (the "Software"), to deal in the Software without
+* restriction, including without limitation the rights to use, copy, modify, merge, publish,
+* distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the
+* Software is furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in all copies or
+* substantial portions of the Software.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING
+* BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
+* DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+*/
+
+#include "stdint.h"
+
+#include "USBKeyboard.h"
+
+#define REPORT_ID_KEYBOARD 1
+#define REPORT_ID_VOLUME 3
+
+
+typedef struct {
+ unsigned char usage;
+ unsigned char modifier;
+} KEYMAP;
+
+#ifdef US_KEYBOARD
+/* US keyboard (as HID standard) */
+#define KEYMAP_SIZE (152)
+const KEYMAP keymap[KEYMAP_SIZE] = {
+ {0, 0}, /* NUL */
+ {0, 0}, /* SOH */
+ {0, 0}, /* STX */
+ {0, 0}, /* ETX */
+ {0, 0}, /* EOT */
+ {0, 0}, /* ENQ */
+ {0, 0}, /* ACK */
+ {0, 0}, /* BEL */
+ {0x2a, 0}, /* BS */ /* Keyboard Delete (Backspace) */
+ {0x2b, 0}, /* TAB */ /* Keyboard Tab */
+ {0x28, 0}, /* LF */ /* Keyboard Return (Enter) */
+ {0, 0}, /* VT */
+ {0, 0}, /* FF */
+ {0, 0}, /* CR */
+ {0, 0}, /* SO */
+ {0, 0}, /* SI */
+ {0, 0}, /* DEL */
+ {0, 0}, /* DC1 */
+ {0, 0}, /* DC2 */
+ {0, 0}, /* DC3 */
+ {0, 0}, /* DC4 */
+ {0, 0}, /* NAK */
+ {0, 0}, /* SYN */
+ {0, 0}, /* ETB */
+ {0, 0}, /* CAN */
+ {0, 0}, /* EM */
+ {0, 0}, /* SUB */
+ {0, 0}, /* ESC */
+ {0, 0}, /* FS */
+ {0, 0}, /* GS */
+ {0, 0}, /* RS */
+ {0, 0}, /* US */
+ {0x2c, 0}, /* */
+ {0x1e, KEY_SHIFT}, /* ! */
+ {0x34, KEY_SHIFT}, /* " */
+ {0x20, KEY_SHIFT}, /* # */
+ {0x21, KEY_SHIFT}, /* $ */
+ {0x22, KEY_SHIFT}, /* % */
+ {0x24, KEY_SHIFT}, /* & */
+ {0x34, 0}, /* ' */
+ {0x26, KEY_SHIFT}, /* ( */
+ {0x27, KEY_SHIFT}, /* ) */
+ {0x25, KEY_SHIFT}, /* * */
+ {0x2e, KEY_SHIFT}, /* + */
+ {0x36, 0}, /* , */
+ {0x2d, 0}, /* - */
+ {0x37, 0}, /* . */
+ {0x38, 0}, /* / */
+ {0x27, 0}, /* 0 */
+ {0x1e, 0}, /* 1 */
+ {0x1f, 0}, /* 2 */
+ {0x20, 0}, /* 3 */
+ {0x21, 0}, /* 4 */
+ {0x22, 0}, /* 5 */
+ {0x23, 0}, /* 6 */
+ {0x24, 0}, /* 7 */
+ {0x25, 0}, /* 8 */
+ {0x26, 0}, /* 9 */
+ {0x33, KEY_SHIFT}, /* : */
+ {0x33, 0}, /* ; */
+ {0x36, KEY_SHIFT}, /* < */
+ {0x2e, 0}, /* = */
+ {0x37, KEY_SHIFT}, /* > */
+ {0x38, KEY_SHIFT}, /* ? */
+ {0x1f, KEY_SHIFT}, /* @ */
+ {0x04, KEY_SHIFT}, /* A */
+ {0x05, KEY_SHIFT}, /* B */
+ {0x06, KEY_SHIFT}, /* C */
+ {0x07, KEY_SHIFT}, /* D */
+ {0x08, KEY_SHIFT}, /* E */
+ {0x09, KEY_SHIFT}, /* F */
+ {0x0a, KEY_SHIFT}, /* G */
+ {0x0b, KEY_SHIFT}, /* H */
+ {0x0c, KEY_SHIFT}, /* I */
+ {0x0d, KEY_SHIFT}, /* J */
+ {0x0e, KEY_SHIFT}, /* K */
+ {0x0f, KEY_SHIFT}, /* L */
+ {0x10, KEY_SHIFT}, /* M */
+ {0x11, KEY_SHIFT}, /* N */
+ {0x12, KEY_SHIFT}, /* O */
+ {0x13, KEY_SHIFT}, /* P */
+ {0x14, KEY_SHIFT}, /* Q */
+ {0x15, KEY_SHIFT}, /* R */
+ {0x16, KEY_SHIFT}, /* S */
+ {0x17, KEY_SHIFT}, /* T */
+ {0x18, KEY_SHIFT}, /* U */
+ {0x19, KEY_SHIFT}, /* V */
+ {0x1a, KEY_SHIFT}, /* W */
+ {0x1b, KEY_SHIFT}, /* X */
+ {0x1c, KEY_SHIFT}, /* Y */
+ {0x1d, KEY_SHIFT}, /* Z */
+ {0x2f, 0}, /* [ */
+ {0x31, 0}, /* \ */
+ {0x30, 0}, /* ] */
+ {0x23, KEY_SHIFT}, /* ^ */
+ {0x2d, KEY_SHIFT}, /* _ */
+ {0x35, 0}, /* ` */
+ {0x04, 0}, /* a */
+ {0x05, 0}, /* b */
+ {0x06, 0}, /* c */
+ {0x07, 0}, /* d */
+ {0x08, 0}, /* e */
+ {0x09, 0}, /* f */
+ {0x0a, 0}, /* g */
+ {0x0b, 0}, /* h */
+ {0x0c, 0}, /* i */
+ {0x0d, 0}, /* j */
+ {0x0e, 0}, /* k */
+ {0x0f, 0}, /* l */
+ {0x10, 0}, /* m */
+ {0x11, 0}, /* n */
+ {0x12, 0}, /* o */
+ {0x13, 0}, /* p */
+ {0x14, 0}, /* q */
+ {0x15, 0}, /* r */
+ {0x16, 0}, /* s */
+ {0x17, 0}, /* t */
+ {0x18, 0}, /* u */
+ {0x19, 0}, /* v */
+ {0x1a, 0}, /* w */
+ {0x1b, 0}, /* x */
+ {0x1c, 0}, /* y */
+ {0x1d, 0}, /* z */
+ {0x2f, KEY_SHIFT}, /* { */
+ {0x31, KEY_SHIFT}, /* | */
+ {0x30, KEY_SHIFT}, /* } */
+ {0x35, KEY_SHIFT}, /* ~ */
+ {0,0}, /* DEL */
+
+ {0x3a, 0}, /* F1 */
+ {0x3b, 0}, /* F2 */
+ {0x3c, 0}, /* F3 */
+ {0x3d, 0}, /* F4 */
+ {0x3e, 0}, /* F5 */
+ {0x3f, 0}, /* F6 */
+ {0x40, 0}, /* F7 */
+ {0x41, 0}, /* F8 */
+ {0x42, 0}, /* F9 */
+ {0x43, 0}, /* F10 */
+ {0x44, 0}, /* F11 */
+ {0x45, 0}, /* F12 */
+
+ {0x46, 0}, /* PRINT_SCREEN */
+ {0x47, 0}, /* SCROLL_LOCK */
+ {0x39, 0}, /* CAPS_LOCK */
+ {0x53, 0}, /* NUM_LOCK */
+ {0x49, 0}, /* INSERT */
+ {0x4a, 0}, /* HOME */
+ {0x4b, 0}, /* PAGE_UP */
+ {0x4e, 0}, /* PAGE_DOWN */
+
+ {0x4f, 0}, /* RIGHT_ARROW */
+ {0x50, 0}, /* LEFT_ARROW */
+ {0x51, 0}, /* DOWN_ARROW */
+ {0x52, 0}, /* UP_ARROW */
+};
+
+#else
+/* UK keyboard */
+#define KEYMAP_SIZE (152)
+const KEYMAP keymap[KEYMAP_SIZE] = {
+ {0, 0}, /* NUL */
+ {0, 0}, /* SOH */
+ {0, 0}, /* STX */
+ {0, 0}, /* ETX */
+ {0, 0}, /* EOT */
+ {0, 0}, /* ENQ */
+ {0, 0}, /* ACK */
+ {0, 0}, /* BEL */
+ {0x2a, 0}, /* BS */ /* Keyboard Delete (Backspace) */
+ {0x2b, 0}, /* TAB */ /* Keyboard Tab */
+ {0x28, 0}, /* LF */ /* Keyboard Return (Enter) */
+ {0, 0}, /* VT */
+ {0, 0}, /* FF */
+ {0, 0}, /* CR */
+ {0, 0}, /* SO */
+ {0, 0}, /* SI */
+ {0, 0}, /* DEL */
+ {0, 0}, /* DC1 */
+ {0, 0}, /* DC2 */
+ {0, 0}, /* DC3 */
+ {0, 0}, /* DC4 */
+ {0, 0}, /* NAK */
+ {0, 0}, /* SYN */
+ {0, 0}, /* ETB */
+ {0, 0}, /* CAN */
+ {0, 0}, /* EM */
+ {0, 0}, /* SUB */
+ {0, 0}, /* ESC */
+ {0, 0}, /* FS */
+ {0, 0}, /* GS */
+ {0, 0}, /* RS */
+ {0, 0}, /* US */
+ {0x2c, 0}, /* */
+ {0x1e, KEY_SHIFT}, /* ! */
+ {0x1f, KEY_SHIFT}, /* " */
+ {0x32, 0}, /* # */
+ {0x21, KEY_SHIFT}, /* $ */
+ {0x22, KEY_SHIFT}, /* % */
+ {0x24, KEY_SHIFT}, /* & */
+ {0x34, 0}, /* ' */
+ {0x26, KEY_SHIFT}, /* ( */
+ {0x27, KEY_SHIFT}, /* ) */
+ {0x25, KEY_SHIFT}, /* * */
+ {0x2e, KEY_SHIFT}, /* + */
+ {0x36, 0}, /* , */
+ {0x2d, 0}, /* - */
+ {0x37, 0}, /* . */
+ {0x38, 0}, /* / */
+ {0x27, 0}, /* 0 */
+ {0x1e, 0}, /* 1 */
+ {0x1f, 0}, /* 2 */
+ {0x20, 0}, /* 3 */
+ {0x21, 0}, /* 4 */
+ {0x22, 0}, /* 5 */
+ {0x23, 0}, /* 6 */
+ {0x24, 0}, /* 7 */
+ {0x25, 0}, /* 8 */
+ {0x26, 0}, /* 9 */
+ {0x33, KEY_SHIFT}, /* : */
+ {0x33, 0}, /* ; */
+ {0x36, KEY_SHIFT}, /* < */
+ {0x2e, 0}, /* = */
+ {0x37, KEY_SHIFT}, /* > */
+ {0x38, KEY_SHIFT}, /* ? */
+ {0x34, KEY_SHIFT}, /* @ */
+ {0x04, KEY_SHIFT}, /* A */
+ {0x05, KEY_SHIFT}, /* B */
+ {0x06, KEY_SHIFT}, /* C */
+ {0x07, KEY_SHIFT}, /* D */
+ {0x08, KEY_SHIFT}, /* E */
+ {0x09, KEY_SHIFT}, /* F */
+ {0x0a, KEY_SHIFT}, /* G */
+ {0x0b, KEY_SHIFT}, /* H */
+ {0x0c, KEY_SHIFT}, /* I */
+ {0x0d, KEY_SHIFT}, /* J */
+ {0x0e, KEY_SHIFT}, /* K */
+ {0x0f, KEY_SHIFT}, /* L */
+ {0x10, KEY_SHIFT}, /* M */
+ {0x11, KEY_SHIFT}, /* N */
+ {0x12, KEY_SHIFT}, /* O */
+ {0x13, KEY_SHIFT}, /* P */
+ {0x14, KEY_SHIFT}, /* Q */
+ {0x15, KEY_SHIFT}, /* R */
+ {0x16, KEY_SHIFT}, /* S */
+ {0x17, KEY_SHIFT}, /* T */
+ {0x18, KEY_SHIFT}, /* U */
+ {0x19, KEY_SHIFT}, /* V */
+ {0x1a, KEY_SHIFT}, /* W */
+ {0x1b, KEY_SHIFT}, /* X */
+ {0x1c, KEY_SHIFT}, /* Y */
+ {0x1d, KEY_SHIFT}, /* Z */
+ {0x2f, 0}, /* [ */
+ {0x64, 0}, /* \ */
+ {0x30, 0}, /* ] */
+ {0x23, KEY_SHIFT}, /* ^ */
+ {0x2d, KEY_SHIFT}, /* _ */
+ {0x35, 0}, /* ` */
+ {0x04, 0}, /* a */
+ {0x05, 0}, /* b */
+ {0x06, 0}, /* c */
+ {0x07, 0}, /* d */
+ {0x08, 0}, /* e */
+ {0x09, 0}, /* f */
+ {0x0a, 0}, /* g */
+ {0x0b, 0}, /* h */
+ {0x0c, 0}, /* i */
+ {0x0d, 0}, /* j */
+ {0x0e, 0}, /* k */
+ {0x0f, 0}, /* l */
+ {0x10, 0}, /* m */
+ {0x11, 0}, /* n */
+ {0x12, 0}, /* o */
+ {0x13, 0}, /* p */
+ {0x14, 0}, /* q */
+ {0x15, 0}, /* r */
+ {0x16, 0}, /* s */
+ {0x17, 0}, /* t */
+ {0x18, 0}, /* u */
+ {0x19, 0}, /* v */
+ {0x1a, 0}, /* w */
+ {0x1b, 0}, /* x */
+ {0x1c, 0}, /* y */
+ {0x1d, 0}, /* z */
+ {0x2f, KEY_SHIFT}, /* { */
+ {0x64, KEY_SHIFT}, /* | */
+ {0x30, KEY_SHIFT}, /* } */
+ {0x32, KEY_SHIFT}, /* ~ */
+ {0,0}, /* DEL */
+
+ {0x3a, 0}, /* F1 */
+ {0x3b, 0}, /* F2 */
+ {0x3c, 0}, /* F3 */
+ {0x3d, 0}, /* F4 */
+ {0x3e, 0}, /* F5 */
+ {0x3f, 0}, /* F6 */
+ {0x40, 0}, /* F7 */
+ {0x41, 0}, /* F8 */
+ {0x42, 0}, /* F9 */
+ {0x43, 0}, /* F10 */
+ {0x44, 0}, /* F11 */
+ {0x45, 0}, /* F12 */
+
+ {0x46, 0}, /* PRINT_SCREEN */
+ {0x47, 0}, /* SCROLL_LOCK */
+ {0x39, 0}, /* CAPS_LOCK */
+ {0x53, 0}, /* NUM_LOCK */
+ {0x49, 0}, /* INSERT */
+ {0x4a, 0}, /* HOME */
+ {0x4b, 0}, /* PAGE_UP */
+ {0x4e, 0}, /* PAGE_DOWN */
+
+ {0x4f, 0}, /* RIGHT_ARROW */
+ {0x50, 0}, /* LEFT_ARROW */
+ {0x51, 0}, /* DOWN_ARROW */
+ {0x52, 0}, /* UP_ARROW */
+};
+#endif
+
+uint8_t * USBKeyboard::reportDesc() {
+ static uint8_t reportDescriptor[] = {
+ USAGE_PAGE(1), 0x01, // Generic Desktop
+ USAGE(1), 0x06, // Keyboard
+ COLLECTION(1), 0x01, // Application
+ REPORT_ID(1), REPORT_ID_KEYBOARD,
+
+ USAGE_PAGE(1), 0x07, // Key Codes
+ USAGE_MINIMUM(1), 0xE0,
+ USAGE_MAXIMUM(1), 0xE7,
+ LOGICAL_MINIMUM(1), 0x00,
+ LOGICAL_MAXIMUM(1), 0x01,
+ REPORT_SIZE(1), 0x01,
+ REPORT_COUNT(1), 0x08,
+ INPUT(1), 0x02, // Data, Variable, Absolute
+ REPORT_COUNT(1), 0x01,
+ REPORT_SIZE(1), 0x08,
+ INPUT(1), 0x01, // Constant
+
+
+ REPORT_COUNT(1), 0x05,
+ REPORT_SIZE(1), 0x01,
+ USAGE_PAGE(1), 0x08, // LEDs
+ USAGE_MINIMUM(1), 0x01,
+ USAGE_MAXIMUM(1), 0x05,
+ OUTPUT(1), 0x02, // Data, Variable, Absolute
+ REPORT_COUNT(1), 0x01,
+ REPORT_SIZE(1), 0x03,
+ OUTPUT(1), 0x01, // Constant
+
+
+ REPORT_COUNT(1), 0x06,
+ REPORT_SIZE(1), 0x08,
+ LOGICAL_MINIMUM(1), 0x00,
+ LOGICAL_MAXIMUM(1), 0x65,
+ USAGE_PAGE(1), 0x07, // Key Codes
+ USAGE_MINIMUM(1), 0x00,
+ USAGE_MAXIMUM(1), 0x65,
+ INPUT(1), 0x00, // Data, Array
+ END_COLLECTION(0),
+
+ // Media Control
+ USAGE_PAGE(1), 0x0C,
+ USAGE(1), 0x01,
+ COLLECTION(1), 0x01,
+ REPORT_ID(1), REPORT_ID_VOLUME,
+ USAGE_PAGE(1), 0x0C,
+ LOGICAL_MINIMUM(1), 0x00,
+ LOGICAL_MAXIMUM(1), 0x01,
+ REPORT_SIZE(1), 0x01,
+ REPORT_COUNT(1), 0x07,
+ USAGE(1), 0xB5, // Next Track
+ USAGE(1), 0xB6, // Previous Track
+ USAGE(1), 0xB7, // Stop
+ USAGE(1), 0xCD, // Play / Pause
+ USAGE(1), 0xE2, // Mute
+ USAGE(1), 0xE9, // Volume Up
+ USAGE(1), 0xEA, // Volume Down
+ INPUT(1), 0x02, // Input (Data, Variable, Absolute)
+ REPORT_COUNT(1), 0x01,
+ INPUT(1), 0x01,
+ END_COLLECTION(0),
+ };
+ reportLength = sizeof(reportDescriptor);
+ return reportDescriptor;
+}
+
+
+bool USBKeyboard::EP1_OUT_callback() {
+ uint32_t bytesRead = 0;
+ uint8_t led[65];
+ USBDevice::readEP(EPINT_OUT, led, &bytesRead, MAX_HID_REPORT_SIZE);
+
+ // we take led[1] because led[0] is the report ID
+ lock_status = led[1] & 0x07;
+
+ // We activate the endpoint to be able to recceive data
+ if (!readStart(EPINT_OUT, MAX_HID_REPORT_SIZE))
+ return false;
+ return true;
+}
+
+uint8_t USBKeyboard::lockStatus() {
+ return lock_status;
+}
+
+int USBKeyboard::_putc(int c) {
+ return keyCode(c, keymap[c].modifier);
+}
+
+bool USBKeyboard::keyCode(uint8_t key, uint8_t modifier) {
+ // Send a simulated keyboard keypress. Returns true if successful.
+ HID_REPORT report;
+
+ report.data[0] = REPORT_ID_KEYBOARD;
+ report.data[1] = modifier;
+ report.data[2] = 0;
+ report.data[3] = keymap[key].usage;
+ report.data[4] = 0;
+ report.data[5] = 0;
+ report.data[6] = 0;
+ report.data[7] = 0;
+ report.data[8] = 0;
+
+ report.length = 9;
+
+ if (!send(&report)) {
+ return false;
+ }
+
+ report.data[1] = 0;
+ report.data[3] = 0;
+
+ if (!send(&report)) {
+ return false;
+ }
+
+ return true;
+
+}
+
+
+bool USBKeyboard::mediaControl(MEDIA_KEY key) {
+ HID_REPORT report;
+
+ report.data[0] = REPORT_ID_VOLUME;
+ report.data[1] = (1 << key) & 0x7f;
+
+ report.length = 2;
+
+ if (!send(&report)) {
+ return false;
+ }
+
+ report.data[0] = REPORT_ID_VOLUME;
+ report.data[1] = 0;
+
+ report.length = 2;
+
+ return send(&report);
+}
+
+
+#define DEFAULT_CONFIGURATION (1)
+#define TOTAL_DESCRIPTOR_LENGTH ((1 * CONFIGURATION_DESCRIPTOR_LENGTH) \
+ + (1 * INTERFACE_DESCRIPTOR_LENGTH) \
+ + (1 * HID_DESCRIPTOR_LENGTH) \
+ + (2 * ENDPOINT_DESCRIPTOR_LENGTH))
+
+uint8_t * USBKeyboard::configurationDesc() {
+ static uint8_t configurationDescriptor[] = {
+ CONFIGURATION_DESCRIPTOR_LENGTH,// bLength
+ CONFIGURATION_DESCRIPTOR, // bDescriptorType
+ LSB(TOTAL_DESCRIPTOR_LENGTH), // wTotalLength (LSB)
+ MSB(TOTAL_DESCRIPTOR_LENGTH), // wTotalLength (MSB)
+ 0x01, // bNumInterfaces
+ DEFAULT_CONFIGURATION, // bConfigurationValue
+ 0x00, // iConfiguration
+ C_RESERVED | C_SELF_POWERED, // bmAttributes
+ C_POWER(0), // bMaxPowerHello World from Mbed
+
+ INTERFACE_DESCRIPTOR_LENGTH, // bLength
+ INTERFACE_DESCRIPTOR, // bDescriptorType
+ 0x00, // bInterfaceNumber
+ 0x00, // bAlternateSetting
+ 0x02, // bNumEndpoints
+ HID_CLASS, // bInterfaceClass
+ 1, // bInterfaceSubClass
+ 1, // bInterfaceProtocol (keyboard)
+ 0x00, // iInterface
+
+ HID_DESCRIPTOR_LENGTH, // bLength
+ HID_DESCRIPTOR, // bDescriptorType
+ LSB(HID_VERSION_1_11), // bcdHID (LSB)
+ MSB(HID_VERSION_1_11), // bcdHID (MSB)
+ 0x00, // bCountryCode
+ 0x01, // bNumDescriptors
+ REPORT_DESCRIPTOR, // bDescriptorType
+ (uint8_t)(LSB(reportDescLength())), // wDescriptorLength (LSB)
+ (uint8_t)(MSB(reportDescLength())), // wDescriptorLength (MSB)
+
+ ENDPOINT_DESCRIPTOR_LENGTH, // bLength
+ ENDPOINT_DESCRIPTOR, // bDescriptorType
+ PHY_TO_DESC(EPINT_IN), // bEndpointAddress
+ E_INTERRUPT, // bmAttributes
+ LSB(MAX_PACKET_SIZE_EPINT), // wMaxPacketSize (LSB)
+ MSB(MAX_PACKET_SIZE_EPINT), // wMaxPacketSize (MSB)
+ 1, // bInterval (milliseconds)
+
+ ENDPOINT_DESCRIPTOR_LENGTH, // bLength
+ ENDPOINT_DESCRIPTOR, // bDescriptorType
+ PHY_TO_DESC(EPINT_OUT), // bEndpointAddress
+ E_INTERRUPT, // bmAttributes
+ LSB(MAX_PACKET_SIZE_EPINT), // wMaxPacketSize (LSB)
+ MSB(MAX_PACKET_SIZE_EPINT), // wMaxPacketSize (MSB)
+ 1, // bInterval (milliseconds)
+ };
+ return configurationDescriptor;
+}
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/USBDevice/USBHID/USBKeyboard.h Fri Aug 29 08:33:17 2014 +0000
@@ -0,0 +1,183 @@
+/* Copyright (c) 2010-2011 mbed.org, MIT License
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy of this software
+* and associated documentation files (the "Software"), to deal in the Software without
+* restriction, including without limitation the rights to use, copy, modify, merge, publish,
+* distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the
+* Software is furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in all copies or
+* substantial portions of the Software.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING
+* BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
+* DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+*/
+
+#ifndef USBKEYBOARD_H
+#define USBKEYBOARD_H
+
+#include "USBHID.h"
+#include "Stream.h"
+
+/* Modifiers */
+enum MODIFIER_KEY {
+ KEY_CTRL = 1,
+ KEY_SHIFT = 2,
+ KEY_ALT = 4,
+};
+
+
+enum MEDIA_KEY {
+ KEY_NEXT_TRACK, /*!< next Track Button */
+ KEY_PREVIOUS_TRACK, /*!< Previous track Button */
+ KEY_STOP, /*!< Stop Button */
+ KEY_PLAY_PAUSE, /*!< Play/Pause Button */
+ KEY_MUTE, /*!< Mute Button */
+ KEY_VOLUME_UP, /*!< Volume Up Button */
+ KEY_VOLUME_DOWN, /*!< Volume Down Button */
+};
+
+enum FUNCTION_KEY {
+ KEY_F1 = 128, /* F1 key */
+ KEY_F2, /* F2 key */
+ KEY_F3, /* F3 key */
+ KEY_F4, /* F4 key */
+ KEY_F5, /* F5 key */
+ KEY_F6, /* F6 key */
+ KEY_F7, /* F7 key */
+ KEY_F8, /* F8 key */
+ KEY_F9, /* F9 key */
+ KEY_F10, /* F10 key */
+ KEY_F11, /* F11 key */
+ KEY_F12, /* F12 key */
+
+ KEY_PRINT_SCREEN, /* Print Screen key */
+ KEY_SCROLL_LOCK, /* Scroll lock */
+ KEY_CAPS_LOCK, /* caps lock */
+ KEY_NUM_LOCK, /* num lock */
+ KEY_INSERT, /* Insert key */
+ KEY_HOME, /* Home key */
+ KEY_PAGE_UP, /* Page Up key */
+ KEY_PAGE_DOWN, /* Page Down key */
+
+ RIGHT_ARROW, /* Right arrow */
+ LEFT_ARROW, /* Left arrow */
+ DOWN_ARROW, /* Down arrow */
+ UP_ARROW, /* Up arrow */
+};
+
+/**
+ * USBKeyboard example
+ * @code
+ *
+ * #include "mbed.h"
+ * #include "USBKeyboard.h"
+ *
+ * USBKeyboard key;
+ *
+ * int main(void)
+ * {
+ * while (1)
+ * {
+ * key.printf("Hello World\r\n");
+ * wait(1);
+ * }
+ * }
+ *
+ * @endcode
+ */
+class USBKeyboard: public USBHID, public Stream {
+public:
+
+ /**
+ * Constructor
+ *
+ *
+ * @param leds Leds bus: first: NUM_LOCK, second: CAPS_LOCK, third: SCROLL_LOCK
+ * @param vendor_id Your vendor_id (default: 0x1235)
+ * @param product_id Your product_id (default: 0x0050)
+ * @param product_release Your preoduct_release (default: 0x0001)
+ *
+ */
+ USBKeyboard(uint16_t vendor_id = 0x1235, uint16_t product_id = 0x0050, uint16_t product_release = 0x0001):
+ USBHID(0, 0, vendor_id, product_id, product_release, false) {
+ lock_status = 0;
+ connect();
+ };
+
+ /**
+ * To send a character defined by a modifier(CTRL, SHIFT, ALT) and the key
+ *
+ * @code
+ * //To send CTRL + s (save)
+ * keyboard.keyCode('s', KEY_CTRL);
+ * @endcode
+ *
+ * @param modifier bit 0: KEY_CTRL, bit 1: KEY_SHIFT, bit 2: KEY_ALT (default: 0)
+ * @param key character to send
+ * @returns true if there is no error, false otherwise
+ */
+ bool keyCode(uint8_t key, uint8_t modifier = 0);
+
+ /**
+ * Send a character
+ *
+ * @param c character to be sent
+ * @returns true if there is no error, false otherwise
+ */
+ virtual int _putc(int c);
+
+ /**
+ * Control media keys
+ *
+ * @param key media key pressed (KEY_NEXT_TRACK, KEY_PREVIOUS_TRACK, KEY_STOP, KEY_PLAY_PAUSE, KEY_MUTE, KEY_VOLUME_UP, KEY_VOLUME_DOWN)
+ * @returns true if there is no error, false otherwise
+ */
+ bool mediaControl(MEDIA_KEY key);
+
+ /*
+ * To define the report descriptor. Warning: this method has to store the length of the report descriptor in reportLength.
+ *
+ * @returns pointer to the report descriptor
+ */
+ virtual uint8_t * reportDesc();
+
+ /*
+ * Called when a data is received on the OUT endpoint. Useful to switch on LED of LOCK keys
+ *
+ * @returns if handle by subclass, return true
+ */
+ virtual bool EP1_OUT_callback();
+
+ /**
+ * Read status of lock keys. Useful to switch-on/off leds according to key pressed. Only the first three bits of the result is important:
+ * - First bit: NUM_LOCK
+ * - Second bit: CAPS_LOCK
+ * - Third bit: SCROLL_LOCK
+ *
+ * @returns status of lock keys
+ */
+ uint8_t lockStatus();
+
+protected:
+ /*
+ * Get configuration descriptor
+ *
+ * @returns pointer to the configuration descriptor
+ */
+ virtual uint8_t * configurationDesc();
+
+private:
+ //dummy otherwise it doesn,t compile (we must define all methods of an abstract class)
+ virtual int _getc() {
+ return -1;
+ };
+
+ uint8_t lock_status;
+
+};
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/USBDevice/USBHID/USBMouse.cpp Fri Aug 29 08:33:17 2014 +0000
@@ -0,0 +1,245 @@
+/* Copyright (c) 2010-2011 mbed.org, MIT License
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy of this software
+* and associated documentation files (the "Software"), to deal in the Software without
+* restriction, including without limitation the rights to use, copy, modify, merge, publish,
+* distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the
+* Software is furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in all copies or
+* substantial portions of the Software.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING
+* BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
+* DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+*/
+
+#include "stdint.h"
+#include "USBMouse.h"
+
+bool USBMouse::update(int16_t x, int16_t y, uint8_t button, int8_t z) {
+ switch (mouse_type) {
+ case REL_MOUSE:
+ while (x > 127) {
+ if (!mouseSend(127, 0, button, z)) return false;
+ x = x - 127;
+ }
+ while (x < -128) {
+ if (!mouseSend(-128, 0, button, z)) return false;
+ x = x + 128;
+ }
+ while (y > 127) {
+ if (!mouseSend(0, 127, button, z)) return false;
+ y = y - 127;
+ }
+ while (y < -128) {
+ if (!mouseSend(0, -128, button, z)) return false;
+ y = y + 128;
+ }
+ return mouseSend(x, y, button, z);
+ case ABS_MOUSE:
+ HID_REPORT report;
+
+ report.data[0] = x & 0xff;
+ report.data[1] = (x >> 8) & 0xff;
+ report.data[2] = y & 0xff;
+ report.data[3] = (y >> 8) & 0xff;
+ report.data[4] = -z;
+ report.data[5] = button & 0x07;
+
+ report.length = 6;
+
+ return send(&report);
+ default:
+ return false;
+ }
+}
+
+bool USBMouse::mouseSend(int8_t x, int8_t y, uint8_t buttons, int8_t z) {
+ HID_REPORT report;
+ report.data[0] = buttons & 0x07;
+ report.data[1] = x;
+ report.data[2] = y;
+ report.data[3] = -z; // >0 to scroll down, <0 to scroll up
+
+ report.length = 4;
+
+ return send(&report);
+}
+
+bool USBMouse::move(int16_t x, int16_t y) {
+ return update(x, y, button, 0);
+}
+
+bool USBMouse::scroll(int8_t z) {
+ return update(0, 0, button, z);
+}
+
+
+bool USBMouse::doubleClick() {
+ if (!click(MOUSE_LEFT))
+ return false;
+ wait(0.1);
+ return click(MOUSE_LEFT);
+}
+
+bool USBMouse::click(uint8_t button) {
+ if (!update(0, 0, button, 0))
+ return false;
+ wait(0.01);
+ return update(0, 0, 0, 0);
+}
+
+bool USBMouse::press(uint8_t button_) {
+ button = button_ & 0x07;
+ return update(0, 0, button, 0);
+}
+
+bool USBMouse::release(uint8_t button_) {
+ button = (button & (~button_)) & 0x07;
+ return update(0, 0, button, 0);
+}
+
+
+uint8_t * USBMouse::reportDesc() {
+
+ if (mouse_type == REL_MOUSE) {
+ static uint8_t reportDescriptor[] = {
+ USAGE_PAGE(1), 0x01, // Genric Desktop
+ USAGE(1), 0x02, // Mouse
+ COLLECTION(1), 0x01, // Application
+ USAGE(1), 0x01, // Pointer
+ COLLECTION(1), 0x00, // Physical
+
+ REPORT_COUNT(1), 0x03,
+ REPORT_SIZE(1), 0x01,
+ USAGE_PAGE(1), 0x09, // Buttons
+ USAGE_MINIMUM(1), 0x1,
+ USAGE_MAXIMUM(1), 0x3,
+ LOGICAL_MINIMUM(1), 0x00,
+ LOGICAL_MAXIMUM(1), 0x01,
+ INPUT(1), 0x02,
+ REPORT_COUNT(1), 0x01,
+ REPORT_SIZE(1), 0x05,
+ INPUT(1), 0x01,
+
+ REPORT_COUNT(1), 0x03,
+ REPORT_SIZE(1), 0x08,
+ USAGE_PAGE(1), 0x01,
+ USAGE(1), 0x30, // X
+ USAGE(1), 0x31, // Y
+ USAGE(1), 0x38, // scroll
+ LOGICAL_MINIMUM(1), 0x81,
+ LOGICAL_MAXIMUM(1), 0x7f,
+ INPUT(1), 0x06, // Relative data
+
+ END_COLLECTION(0),
+ END_COLLECTION(0),
+ };
+ reportLength = sizeof(reportDescriptor);
+ return reportDescriptor;
+ } else if (mouse_type == ABS_MOUSE) {
+ static uint8_t reportDescriptor[] = {
+
+ USAGE_PAGE(1), 0x01, // Generic Desktop
+ USAGE(1), 0x02, // Mouse
+ COLLECTION(1), 0x01, // Application
+ USAGE(1), 0x01, // Pointer
+ COLLECTION(1), 0x00, // Physical
+
+ USAGE_PAGE(1), 0x01, // Generic Desktop
+ USAGE(1), 0x30, // X
+ USAGE(1), 0x31, // Y
+ LOGICAL_MINIMUM(1), 0x00, // 0
+ LOGICAL_MAXIMUM(2), 0xff, 0x7f, // 32767
+ REPORT_SIZE(1), 0x10,
+ REPORT_COUNT(1), 0x02,
+ INPUT(1), 0x02, // Data, Variable, Absolute
+
+ USAGE_PAGE(1), 0x01, // Generic Desktop
+ USAGE(1), 0x38, // scroll
+ LOGICAL_MINIMUM(1), 0x81, // -127
+ LOGICAL_MAXIMUM(1), 0x7f, // 127
+ REPORT_SIZE(1), 0x08,
+ REPORT_COUNT(1), 0x01,
+ INPUT(1), 0x06, // Data, Variable, Relative
+
+ USAGE_PAGE(1), 0x09, // Buttons
+ USAGE_MINIMUM(1), 0x01,
+ USAGE_MAXIMUM(1), 0x03,
+ LOGICAL_MINIMUM(1), 0x00, // 0
+ LOGICAL_MAXIMUM(1), 0x01, // 1
+ REPORT_COUNT(1), 0x03,
+ REPORT_SIZE(1), 0x01,
+ INPUT(1), 0x02, // Data, Variable, Absolute
+ REPORT_COUNT(1), 0x01,
+ REPORT_SIZE(1), 0x05,
+ INPUT(1), 0x01, // Constant
+
+ END_COLLECTION(0),
+ END_COLLECTION(0)
+ };
+ reportLength = sizeof(reportDescriptor);
+ return reportDescriptor;
+ }
+ return NULL;
+}
+
+#define DEFAULT_CONFIGURATION (1)
+#define TOTAL_DESCRIPTOR_LENGTH ((1 * CONFIGURATION_DESCRIPTOR_LENGTH) \
+ + (1 * INTERFACE_DESCRIPTOR_LENGTH) \
+ + (1 * HID_DESCRIPTOR_LENGTH) \
+ + (2 * ENDPOINT_DESCRIPTOR_LENGTH))
+
+uint8_t * USBMouse::configurationDesc() {
+ static uint8_t configurationDescriptor[] = {
+ CONFIGURATION_DESCRIPTOR_LENGTH,// bLength
+ CONFIGURATION_DESCRIPTOR, // bDescriptorType
+ LSB(TOTAL_DESCRIPTOR_LENGTH), // wTotalLength (LSB)
+ MSB(TOTAL_DESCRIPTOR_LENGTH), // wTotalLength (MSB)
+ 0x01, // bNumInterfaces
+ DEFAULT_CONFIGURATION, // bConfigurationValue
+ 0x00, // iConfiguration
+ C_RESERVED | C_SELF_POWERED, // bmAttributes
+ C_POWER(0), // bMaxPowerHello World from Mbed
+
+ INTERFACE_DESCRIPTOR_LENGTH, // bLength
+ INTERFACE_DESCRIPTOR, // bDescriptorType
+ 0x00, // bInterfaceNumber
+ 0x00, // bAlternateSetting
+ 0x02, // bNumEndpoints
+ HID_CLASS, // bInterfaceClass
+ 1, // bInterfaceSubClass
+ 2, // bInterfaceProtocol (mouse)
+ 0x00, // iInterface
+
+ HID_DESCRIPTOR_LENGTH, // bLength
+ HID_DESCRIPTOR, // bDescriptorType
+ LSB(HID_VERSION_1_11), // bcdHID (LSB)
+ MSB(HID_VERSION_1_11), // bcdHID (MSB)
+ 0x00, // bCountryCode
+ 0x01, // bNumDescriptors
+ REPORT_DESCRIPTOR, // bDescriptorType
+ (uint8_t)(LSB(reportDescLength())), // wDescriptorLength (LSB)
+ (uint8_t)(MSB(reportDescLength())), // wDescriptorLength (MSB)
+
+ ENDPOINT_DESCRIPTOR_LENGTH, // bLength
+ ENDPOINT_DESCRIPTOR, // bDescriptorType
+ PHY_TO_DESC(EPINT_IN), // bEndpointAddress
+ E_INTERRUPT, // bmAttributes
+ LSB(MAX_PACKET_SIZE_EPINT), // wMaxPacketSize (LSB)
+ MSB(MAX_PACKET_SIZE_EPINT), // wMaxPacketSize (MSB)
+ 1, // bInterval (milliseconds)
+
+ ENDPOINT_DESCRIPTOR_LENGTH, // bLength
+ ENDPOINT_DESCRIPTOR, // bDescriptorType
+ PHY_TO_DESC(EPINT_OUT), // bEndpointAddress
+ E_INTERRUPT, // bmAttributes
+ LSB(MAX_PACKET_SIZE_EPINT), // wMaxPacketSize (LSB)
+ MSB(MAX_PACKET_SIZE_EPINT), // wMaxPacketSize (MSB)
+ 1, // bInterval (milliseconds)
+ };
+ return configurationDescriptor;
+}
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/USBDevice/USBHID/USBMouse.h Fri Aug 29 08:33:17 2014 +0000
@@ -0,0 +1,209 @@
+/* Copyright (c) 2010-2011 mbed.org, MIT License
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy of this software
+* and associated documentation files (the "Software"), to deal in the Software without
+* restriction, including without limitation the rights to use, copy, modify, merge, publish,
+* distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the
+* Software is furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in all copies or
+* substantial portions of the Software.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING
+* BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
+* DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+*/
+
+#ifndef USBMOUSE_H
+#define USBMOUSE_H
+
+#include "USBHID.h"
+
+#define REPORT_ID_MOUSE 2
+
+/* Common usage */
+
+enum MOUSE_BUTTON
+{
+ MOUSE_LEFT = 1,
+ MOUSE_RIGHT = 2,
+ MOUSE_MIDDLE = 4,
+};
+
+/* X and Y limits */
+/* These values do not directly map to screen pixels */
+/* Zero may be interpreted as meaning 'no movement' */
+#define X_MIN_ABS (1) /*!< Minimum value on x-axis */
+#define Y_MIN_ABS (1) /*!< Minimum value on y-axis */
+#define X_MAX_ABS (0x7fff) /*!< Maximum value on x-axis */
+#define Y_MAX_ABS (0x7fff) /*!< Maximum value on y-axis */
+
+#define X_MIN_REL (-127) /*!< The maximum value that we can move to the left on the x-axis */
+#define Y_MIN_REL (-127) /*!< The maximum value that we can move up on the y-axis */
+#define X_MAX_REL (127) /*!< The maximum value that we can move to the right on the x-axis */
+#define Y_MAX_REL (127) /*!< The maximum value that we can move down on the y-axis */
+
+enum MOUSE_TYPE
+{
+ ABS_MOUSE,
+ REL_MOUSE,
+};
+
+/**
+ *
+ * USBMouse example
+ * @code
+ * #include "mbed.h"
+ * #include "USBMouse.h"
+ *
+ * USBMouse mouse;
+ *
+ * int main(void)
+ * {
+ * while (1)
+ * {
+ * mouse.move(20, 0);
+ * wait(0.5);
+ * }
+ * }
+ *
+ * @endcode
+ *
+ *
+ * @code
+ * #include "mbed.h"
+ * #include "USBMouse.h"
+ * #include <math.h>
+ *
+ * USBMouse mouse(ABS_MOUSE);
+ *
+ * int main(void)
+ * {
+ * uint16_t x_center = (X_MAX_ABS - X_MIN_ABS)/2;
+ * uint16_t y_center = (Y_MAX_ABS - Y_MIN_ABS)/2;
+ * uint16_t x_screen = 0;
+ * uint16_t y_screen = 0;
+ *
+ * uint32_t x_origin = x_center;
+ * uint32_t y_origin = y_center;
+ * uint32_t radius = 5000;
+ * uint32_t angle = 0;
+ *
+ * while (1)
+ * {
+ * x_screen = x_origin + cos((double)angle*3.14/180.0)*radius;
+ * y_screen = y_origin + sin((double)angle*3.14/180.0)*radius;
+ *
+ * mouse.move(x_screen, y_screen);
+ * angle += 3;
+ * wait(0.01);
+ * }
+ * }
+ *
+ * @endcode
+ */
+class USBMouse: public USBHID
+{
+ public:
+
+ /**
+ * Constructor
+ *
+ * @param mouse_type Mouse type: ABS_MOUSE (absolute mouse) or REL_MOUSE (relative mouse) (default: REL_MOUSE)
+ * @param vendor_id Your vendor_id (default: 0x1234)
+ * @param product_id Your product_id (default: 0x0001)
+ * @param product_release Your preoduct_release (default: 0x0001)
+ *
+ */
+ USBMouse(MOUSE_TYPE mouse_type = REL_MOUSE, uint16_t vendor_id = 0x1234, uint16_t product_id = 0x0001, uint16_t product_release = 0x0001):
+ USBHID(0, 0, vendor_id, product_id, product_release, false)
+ {
+ button = 0;
+ this->mouse_type = mouse_type;
+ connect();
+ };
+
+ /**
+ * Write a state of the mouse
+ *
+ * @param x x-axis position
+ * @param y y-axis position
+ * @param buttons buttons state (first bit represents MOUSE_LEFT, second bit MOUSE_RIGHT and third bit MOUSE_MIDDLE)
+ * @param z wheel state (>0 to scroll down, <0 to scroll up)
+ * @returns true if there is no error, false otherwise
+ */
+ bool update(int16_t x, int16_t y, uint8_t buttons, int8_t z);
+
+
+ /**
+ * Move the cursor to (x, y)
+ *
+ * @param x-axis position
+ * @param y-axis position
+ * @returns true if there is no error, false otherwise
+ */
+ bool move(int16_t x, int16_t y);
+
+ /**
+ * Press one or several buttons
+ *
+ * @param button button state (ex: press(MOUSE_LEFT))
+ * @returns true if there is no error, false otherwise
+ */
+ bool press(uint8_t button);
+
+ /**
+ * Release one or several buttons
+ *
+ * @param button button state (ex: release(MOUSE_LEFT))
+ * @returns true if there is no error, false otherwise
+ */
+ bool release(uint8_t button);
+
+ /**
+ * Double click (MOUSE_LEFT)
+ *
+ * @returns true if there is no error, false otherwise
+ */
+ bool doubleClick();
+
+ /**
+ * Click
+ *
+ * @param button state of the buttons ( ex: clic(MOUSE_LEFT))
+ * @returns true if there is no error, false otherwise
+ */
+ bool click(uint8_t button);
+
+ /**
+ * Scrolling
+ *
+ * @param z value of the wheel (>0 to go down, <0 to go up)
+ * @returns true if there is no error, false otherwise
+ */
+ bool scroll(int8_t z);
+
+ /*
+ * To define the report descriptor. Warning: this method has to store the length of the report descriptor in reportLength.
+ *
+ * @returns pointer to the report descriptor
+ */
+ virtual uint8_t * reportDesc();
+
+ protected:
+ /*
+ * Get configuration descriptor
+ *
+ * @returns pointer to the configuration descriptor
+ */
+ virtual uint8_t * configurationDesc();
+
+ private:
+ MOUSE_TYPE mouse_type;
+ uint8_t button;
+ bool mouseSend(int8_t x, int8_t y, uint8_t buttons, int8_t z);
+};
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/USBDevice/USBHID/USBMouseKeyboard.cpp Fri Aug 29 08:33:17 2014 +0000
@@ -0,0 +1,706 @@
+/* Copyright (c) 2010-2011 mbed.org, MIT License
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy of this software
+* and associated documentation files (the "Software"), to deal in the Software without
+* restriction, including without limitation the rights to use, copy, modify, merge, publish,
+* distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the
+* Software is furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in all copies or
+* substantial portions of the Software.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING
+* BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
+* DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+*/
+
+#include "stdint.h"
+#include "USBMouseKeyboard.h"
+
+typedef struct {
+ unsigned char usage;
+ unsigned char modifier;
+} KEYMAP;
+
+#ifdef US_KEYBOARD
+/* US keyboard (as HID standard) */
+#define KEYMAP_SIZE (152)
+const KEYMAP keymap[KEYMAP_SIZE] = {
+ {0, 0}, /* NUL */
+ {0, 0}, /* SOH */
+ {0, 0}, /* STX */
+ {0, 0}, /* ETX */
+ {0, 0}, /* EOT */
+ {0, 0}, /* ENQ */
+ {0, 0}, /* ACK */
+ {0, 0}, /* BEL */
+ {0x2a, 0}, /* BS */ /* Keyboard Delete (Backspace) */
+ {0x2b, 0}, /* TAB */ /* Keyboard Tab */
+ {0x28, 0}, /* LF */ /* Keyboard Return (Enter) */
+ {0, 0}, /* VT */
+ {0, 0}, /* FF */
+ {0, 0}, /* CR */
+ {0, 0}, /* SO */
+ {0, 0}, /* SI */
+ {0, 0}, /* DEL */
+ {0, 0}, /* DC1 */
+ {0, 0}, /* DC2 */
+ {0, 0}, /* DC3 */
+ {0, 0}, /* DC4 */
+ {0, 0}, /* NAK */
+ {0, 0}, /* SYN */
+ {0, 0}, /* ETB */
+ {0, 0}, /* CAN */
+ {0, 0}, /* EM */
+ {0, 0}, /* SUB */
+ {0, 0}, /* ESC */
+ {0, 0}, /* FS */
+ {0, 0}, /* GS */
+ {0, 0}, /* RS */
+ {0, 0}, /* US */
+ {0x2c, 0}, /* */
+ {0x1e, KEY_SHIFT}, /* ! */
+ {0x34, KEY_SHIFT}, /* " */
+ {0x20, KEY_SHIFT}, /* # */
+ {0x21, KEY_SHIFT}, /* $ */
+ {0x22, KEY_SHIFT}, /* % */
+ {0x24, KEY_SHIFT}, /* & */
+ {0x34, 0}, /* ' */
+ {0x26, KEY_SHIFT}, /* ( */
+ {0x27, KEY_SHIFT}, /* ) */
+ {0x25, KEY_SHIFT}, /* * */
+ {0x2e, KEY_SHIFT}, /* + */
+ {0x36, 0}, /* , */
+ {0x2d, 0}, /* - */
+ {0x37, 0}, /* . */
+ {0x38, 0}, /* / */
+ {0x27, 0}, /* 0 */
+ {0x1e, 0}, /* 1 */
+ {0x1f, 0}, /* 2 */
+ {0x20, 0}, /* 3 */
+ {0x21, 0}, /* 4 */
+ {0x22, 0}, /* 5 */
+ {0x23, 0}, /* 6 */
+ {0x24, 0}, /* 7 */
+ {0x25, 0}, /* 8 */
+ {0x26, 0}, /* 9 */
+ {0x33, KEY_SHIFT}, /* : */
+ {0x33, 0}, /* ; */
+ {0x36, KEY_SHIFT}, /* < */
+ {0x2e, 0}, /* = */
+ {0x37, KEY_SHIFT}, /* > */
+ {0x38, KEY_SHIFT}, /* ? */
+ {0x1f, KEY_SHIFT}, /* @ */
+ {0x04, KEY_SHIFT}, /* A */
+ {0x05, KEY_SHIFT}, /* B */
+ {0x06, KEY_SHIFT}, /* C */
+ {0x07, KEY_SHIFT}, /* D */
+ {0x08, KEY_SHIFT}, /* E */
+ {0x09, KEY_SHIFT}, /* F */
+ {0x0a, KEY_SHIFT}, /* G */
+ {0x0b, KEY_SHIFT}, /* H */
+ {0x0c, KEY_SHIFT}, /* I */
+ {0x0d, KEY_SHIFT}, /* J */
+ {0x0e, KEY_SHIFT}, /* K */
+ {0x0f, KEY_SHIFT}, /* L */
+ {0x10, KEY_SHIFT}, /* M */
+ {0x11, KEY_SHIFT}, /* N */
+ {0x12, KEY_SHIFT}, /* O */
+ {0x13, KEY_SHIFT}, /* P */
+ {0x14, KEY_SHIFT}, /* Q */
+ {0x15, KEY_SHIFT}, /* R */
+ {0x16, KEY_SHIFT}, /* S */
+ {0x17, KEY_SHIFT}, /* T */
+ {0x18, KEY_SHIFT}, /* U */
+ {0x19, KEY_SHIFT}, /* V */
+ {0x1a, KEY_SHIFT}, /* W */
+ {0x1b, KEY_SHIFT}, /* X */
+ {0x1c, KEY_SHIFT}, /* Y */
+ {0x1d, KEY_SHIFT}, /* Z */
+ {0x2f, 0}, /* [ */
+ {0x31, 0}, /* \ */
+ {0x30, 0}, /* ] */
+ {0x23, KEY_SHIFT}, /* ^ */
+ {0x2d, KEY_SHIFT}, /* _ */
+ {0x35, 0}, /* ` */
+ {0x04, 0}, /* a */
+ {0x05, 0}, /* b */
+ {0x06, 0}, /* c */
+ {0x07, 0}, /* d */
+ {0x08, 0}, /* e */
+ {0x09, 0}, /* f */
+ {0x0a, 0}, /* g */
+ {0x0b, 0}, /* h */
+ {0x0c, 0}, /* i */
+ {0x0d, 0}, /* j */
+ {0x0e, 0}, /* k */
+ {0x0f, 0}, /* l */
+ {0x10, 0}, /* m */
+ {0x11, 0}, /* n */
+ {0x12, 0}, /* o */
+ {0x13, 0}, /* p */
+ {0x14, 0}, /* q */
+ {0x15, 0}, /* r */
+ {0x16, 0}, /* s */
+ {0x17, 0}, /* t */
+ {0x18, 0}, /* u */
+ {0x19, 0}, /* v */
+ {0x1a, 0}, /* w */
+ {0x1b, 0}, /* x */
+ {0x1c, 0}, /* y */
+ {0x1d, 0}, /* z */
+ {0x2f, KEY_SHIFT}, /* { */
+ {0x31, KEY_SHIFT}, /* | */
+ {0x30, KEY_SHIFT}, /* } */
+ {0x35, KEY_SHIFT}, /* ~ */
+ {0,0}, /* DEL */
+
+ {0x3a, 0}, /* F1 */
+ {0x3b, 0}, /* F2 */
+ {0x3c, 0}, /* F3 */
+ {0x3d, 0}, /* F4 */
+ {0x3e, 0}, /* F5 */
+ {0x3f, 0}, /* F6 */
+ {0x40, 0}, /* F7 */
+ {0x41, 0}, /* F8 */
+ {0x42, 0}, /* F9 */
+ {0x43, 0}, /* F10 */
+ {0x44, 0}, /* F11 */
+ {0x45, 0}, /* F12 */
+
+ {0x46, 0}, /* PRINT_SCREEN */
+ {0x47, 0}, /* SCROLL_LOCK */
+ {0x39, 0}, /* CAPS_LOCK */
+ {0x53, 0}, /* NUM_LOCK */
+ {0x49, 0}, /* INSERT */
+ {0x4a, 0}, /* HOME */
+ {0x4b, 0}, /* PAGE_UP */
+ {0x4e, 0}, /* PAGE_DOWN */
+
+ {0x4f, 0}, /* RIGHT_ARROW */
+ {0x50, 0}, /* LEFT_ARROW */
+ {0x51, 0}, /* DOWN_ARROW */
+ {0x52, 0}, /* UP_ARROW */
+};
+
+#else
+/* UK keyboard */
+#define KEYMAP_SIZE (152)
+const KEYMAP keymap[KEYMAP_SIZE] = {
+ {0, 0}, /* NUL */
+ {0, 0}, /* SOH */
+ {0, 0}, /* STX */
+ {0, 0}, /* ETX */
+ {0, 0}, /* EOT */
+ {0, 0}, /* ENQ */
+ {0, 0}, /* ACK */
+ {0, 0}, /* BEL */
+ {0x2a, 0}, /* BS */ /* Keyboard Delete (Backspace) */
+ {0x2b, 0}, /* TAB */ /* Keyboard Tab */
+ {0x28, 0}, /* LF */ /* Keyboard Return (Enter) */
+ {0, 0}, /* VT */
+ {0, 0}, /* FF */
+ {0, 0}, /* CR */
+ {0, 0}, /* SO */
+ {0, 0}, /* SI */
+ {0, 0}, /* DEL */
+ {0, 0}, /* DC1 */
+ {0, 0}, /* DC2 */
+ {0, 0}, /* DC3 */
+ {0, 0}, /* DC4 */
+ {0, 0}, /* NAK */
+ {0, 0}, /* SYN */
+ {0, 0}, /* ETB */
+ {0, 0}, /* CAN */
+ {0, 0}, /* EM */
+ {0, 0}, /* SUB */
+ {0, 0}, /* ESC */
+ {0, 0}, /* FS */
+ {0, 0}, /* GS */
+ {0, 0}, /* RS */
+ {0, 0}, /* US */
+ {0x2c, 0}, /* */
+ {0x1e, KEY_SHIFT}, /* ! */
+ {0x1f, KEY_SHIFT}, /* " */
+ {0x32, 0}, /* # */
+ {0x21, KEY_SHIFT}, /* $ */
+ {0x22, KEY_SHIFT}, /* % */
+ {0x24, KEY_SHIFT}, /* & */
+ {0x34, 0}, /* ' */
+ {0x26, KEY_SHIFT}, /* ( */
+ {0x27, KEY_SHIFT}, /* ) */
+ {0x25, KEY_SHIFT}, /* * */
+ {0x2e, KEY_SHIFT}, /* + */
+ {0x36, 0}, /* , */
+ {0x2d, 0}, /* - */
+ {0x37, 0}, /* . */
+ {0x38, 0}, /* / */
+ {0x27, 0}, /* 0 */
+ {0x1e, 0}, /* 1 */
+ {0x1f, 0}, /* 2 */
+ {0x20, 0}, /* 3 */
+ {0x21, 0}, /* 4 */
+ {0x22, 0}, /* 5 */
+ {0x23, 0}, /* 6 */
+ {0x24, 0}, /* 7 */
+ {0x25, 0}, /* 8 */
+ {0x26, 0}, /* 9 */
+ {0x33, KEY_SHIFT}, /* : */
+ {0x33, 0}, /* ; */
+ {0x36, KEY_SHIFT}, /* < */
+ {0x2e, 0}, /* = */
+ {0x37, KEY_SHIFT}, /* > */
+ {0x38, KEY_SHIFT}, /* ? */
+ {0x34, KEY_SHIFT}, /* @ */
+ {0x04, KEY_SHIFT}, /* A */
+ {0x05, KEY_SHIFT}, /* B */
+ {0x06, KEY_SHIFT}, /* C */
+ {0x07, KEY_SHIFT}, /* D */
+ {0x08, KEY_SHIFT}, /* E */
+ {0x09, KEY_SHIFT}, /* F */
+ {0x0a, KEY_SHIFT}, /* G */
+ {0x0b, KEY_SHIFT}, /* H */
+ {0x0c, KEY_SHIFT}, /* I */
+ {0x0d, KEY_SHIFT}, /* J */
+ {0x0e, KEY_SHIFT}, /* K */
+ {0x0f, KEY_SHIFT}, /* L */
+ {0x10, KEY_SHIFT}, /* M */
+ {0x11, KEY_SHIFT}, /* N */
+ {0x12, KEY_SHIFT}, /* O */
+ {0x13, KEY_SHIFT}, /* P */
+ {0x14, KEY_SHIFT}, /* Q */
+ {0x15, KEY_SHIFT}, /* R */
+ {0x16, KEY_SHIFT}, /* S */
+ {0x17, KEY_SHIFT}, /* T */
+ {0x18, KEY_SHIFT}, /* U */
+ {0x19, KEY_SHIFT}, /* V */
+ {0x1a, KEY_SHIFT}, /* W */
+ {0x1b, KEY_SHIFT}, /* X */
+ {0x1c, KEY_SHIFT}, /* Y */
+ {0x1d, KEY_SHIFT}, /* Z */
+ {0x2f, 0}, /* [ */
+ {0x64, 0}, /* \ */
+ {0x30, 0}, /* ] */
+ {0x23, KEY_SHIFT}, /* ^ */
+ {0x2d, KEY_SHIFT}, /* _ */
+ {0x35, 0}, /* ` */
+ {0x04, 0}, /* a */
+ {0x05, 0}, /* b */
+ {0x06, 0}, /* c */
+ {0x07, 0}, /* d */
+ {0x08, 0}, /* e */
+ {0x09, 0}, /* f */
+ {0x0a, 0}, /* g */
+ {0x0b, 0}, /* h */
+ {0x0c, 0}, /* i */
+ {0x0d, 0}, /* j */
+ {0x0e, 0}, /* k */
+ {0x0f, 0}, /* l */
+ {0x10, 0}, /* m */
+ {0x11, 0}, /* n */
+ {0x12, 0}, /* o */
+ {0x13, 0}, /* p */
+ {0x14, 0}, /* q */
+ {0x15, 0}, /* r */
+ {0x16, 0}, /* s */
+ {0x17, 0}, /* t */
+ {0x18, 0}, /* u */
+ {0x19, 0}, /* v */
+ {0x1a, 0}, /* w */
+ {0x1b, 0}, /* x */
+ {0x1c, 0}, /* y */
+ {0x1d, 0}, /* z */
+ {0x2f, KEY_SHIFT}, /* { */
+ {0x64, KEY_SHIFT}, /* | */
+ {0x30, KEY_SHIFT}, /* } */
+ {0x32, KEY_SHIFT}, /* ~ */
+ {0,0}, /* DEL */
+
+ {0x3a, 0}, /* F1 */
+ {0x3b, 0}, /* F2 */
+ {0x3c, 0}, /* F3 */
+ {0x3d, 0}, /* F4 */
+ {0x3e, 0}, /* F5 */
+ {0x3f, 0}, /* F6 */
+ {0x40, 0}, /* F7 */
+ {0x41, 0}, /* F8 */
+ {0x42, 0}, /* F9 */
+ {0x43, 0}, /* F10 */
+ {0x44, 0}, /* F11 */
+ {0x45, 0}, /* F12 */
+
+ {0x46, 0}, /* PRINT_SCREEN */
+ {0x47, 0}, /* SCROLL_LOCK */
+ {0x39, 0}, /* CAPS_LOCK */
+ {0x53, 0}, /* NUM_LOCK */
+ {0x49, 0}, /* INSERT */
+ {0x4a, 0}, /* HOME */
+ {0x4b, 0}, /* PAGE_UP */
+ {0x4e, 0}, /* PAGE_DOWN */
+
+ {0x4f, 0}, /* RIGHT_ARROW */
+ {0x50, 0}, /* LEFT_ARROW */
+ {0x51, 0}, /* DOWN_ARROW */
+ {0x52, 0}, /* UP_ARROW */
+};
+#endif
+
+
+uint8_t * USBMouseKeyboard::reportDesc() {
+ if (mouse_type == REL_MOUSE) {
+ static uint8_t reportDescriptor[] = {
+ // Keyboard
+ USAGE_PAGE(1), 0x01,
+ USAGE(1), 0x06,
+ COLLECTION(1), 0x01,
+ REPORT_ID(1), REPORT_ID_KEYBOARD,
+ USAGE_PAGE(1), 0x07,
+ USAGE_MINIMUM(1), 0xE0,
+ USAGE_MAXIMUM(1), 0xE7,
+ LOGICAL_MINIMUM(1), 0x00,
+ LOGICAL_MAXIMUM(1), 0x01,
+ REPORT_SIZE(1), 0x01,
+ REPORT_COUNT(1), 0x08,
+ INPUT(1), 0x02,
+ REPORT_COUNT(1), 0x01,
+ REPORT_SIZE(1), 0x08,
+ INPUT(1), 0x01,
+ REPORT_COUNT(1), 0x05,
+ REPORT_SIZE(1), 0x01,
+ USAGE_PAGE(1), 0x08,
+ USAGE_MINIMUM(1), 0x01,
+ USAGE_MAXIMUM(1), 0x05,
+ OUTPUT(1), 0x02,
+ REPORT_COUNT(1), 0x01,
+ REPORT_SIZE(1), 0x03,
+ OUTPUT(1), 0x01,
+ REPORT_COUNT(1), 0x06,
+ REPORT_SIZE(1), 0x08,
+ LOGICAL_MINIMUM(1), 0x00,
+ LOGICAL_MAXIMUM(2), 0xff, 0x00,
+ USAGE_PAGE(1), 0x07,
+ USAGE_MINIMUM(1), 0x00,
+ USAGE_MAXIMUM(2), 0xff, 0x00,
+ INPUT(1), 0x00,
+ END_COLLECTION(0),
+
+ // Mouse
+ USAGE_PAGE(1), 0x01, // Generic Desktop
+ USAGE(1), 0x02, // Mouse
+ COLLECTION(1), 0x01, // Application
+ USAGE(1), 0x01, // Pointer
+ COLLECTION(1), 0x00, // Physical
+ REPORT_ID(1), REPORT_ID_MOUSE,
+ REPORT_COUNT(1), 0x03,
+ REPORT_SIZE(1), 0x01,
+ USAGE_PAGE(1), 0x09, // Buttons
+ USAGE_MINIMUM(1), 0x1,
+ USAGE_MAXIMUM(1), 0x3,
+ LOGICAL_MINIMUM(1), 0x00,
+ LOGICAL_MAXIMUM(1), 0x01,
+ INPUT(1), 0x02,
+ REPORT_COUNT(1), 0x01,
+ REPORT_SIZE(1), 0x05,
+ INPUT(1), 0x01,
+ REPORT_COUNT(1), 0x03,
+ REPORT_SIZE(1), 0x08,
+ USAGE_PAGE(1), 0x01,
+ USAGE(1), 0x30, // X
+ USAGE(1), 0x31, // Y
+ USAGE(1), 0x38, // scroll
+ LOGICAL_MINIMUM(1), 0x81,
+ LOGICAL_MAXIMUM(1), 0x7f,
+ INPUT(1), 0x06,
+ END_COLLECTION(0),
+ END_COLLECTION(0),
+
+
+ // Media Control
+ USAGE_PAGE(1), 0x0C,
+ USAGE(1), 0x01,
+ COLLECTION(1), 0x01,
+ REPORT_ID(1), REPORT_ID_VOLUME,
+ USAGE_PAGE(1), 0x0C,
+ LOGICAL_MINIMUM(1), 0x00,
+ LOGICAL_MAXIMUM(1), 0x01,
+ REPORT_SIZE(1), 0x01,
+ REPORT_COUNT(1), 0x07,
+ USAGE(1), 0xB5, // Next Track
+ USAGE(1), 0xB6, // Previous Track
+ USAGE(1), 0xB7, // Stop
+ USAGE(1), 0xCD, // Play / Pause
+ USAGE(1), 0xE2, // Mute
+ USAGE(1), 0xE9, // Volume Up
+ USAGE(1), 0xEA, // Volume Down
+ INPUT(1), 0x02, // Input (Data, Variable, Absolute)
+ REPORT_COUNT(1), 0x01,
+ INPUT(1), 0x01,
+ END_COLLECTION(0),
+ };
+ reportLength = sizeof(reportDescriptor);
+ return reportDescriptor;
+ } else if (mouse_type == ABS_MOUSE) {
+ static uint8_t reportDescriptor[] = {
+
+ // Keyboard
+ USAGE_PAGE(1), 0x01,
+ USAGE(1), 0x06,
+ COLLECTION(1), 0x01,
+ REPORT_ID(1), REPORT_ID_KEYBOARD,
+ USAGE_PAGE(1), 0x07,
+ USAGE_MINIMUM(1), 0xE0,
+ USAGE_MAXIMUM(1), 0xE7,
+ LOGICAL_MINIMUM(1), 0x00,
+ LOGICAL_MAXIMUM(1), 0x01,
+ REPORT_SIZE(1), 0x01,
+ REPORT_COUNT(1), 0x08,
+ INPUT(1), 0x02,
+ REPORT_COUNT(1), 0x01,
+ REPORT_SIZE(1), 0x08,
+ INPUT(1), 0x01,
+ REPORT_COUNT(1), 0x05,
+ REPORT_SIZE(1), 0x01,
+ USAGE_PAGE(1), 0x08,
+ USAGE_MINIMUM(1), 0x01,
+ USAGE_MAXIMUM(1), 0x05,
+ OUTPUT(1), 0x02,
+ REPORT_COUNT(1), 0x01,
+ REPORT_SIZE(1), 0x03,
+ OUTPUT(1), 0x01,
+ REPORT_COUNT(1), 0x06,
+ REPORT_SIZE(1), 0x08,
+ LOGICAL_MINIMUM(1), 0x00,
+ LOGICAL_MAXIMUM(2), 0xff, 0x00,
+ USAGE_PAGE(1), 0x07,
+ USAGE_MINIMUM(1), 0x00,
+ USAGE_MAXIMUM(2), 0xff, 0x00,
+ INPUT(1), 0x00,
+ END_COLLECTION(0),
+
+ // Mouse
+ USAGE_PAGE(1), 0x01, // Generic Desktop
+ USAGE(1), 0x02, // Mouse
+ COLLECTION(1), 0x01, // Application
+ USAGE(1), 0x01, // Pointer
+ COLLECTION(1), 0x00, // Physical
+ REPORT_ID(1), REPORT_ID_MOUSE,
+
+ USAGE_PAGE(1), 0x01, // Generic Desktop
+ USAGE(1), 0x30, // X
+ USAGE(1), 0x31, // Y
+ LOGICAL_MINIMUM(1), 0x00, // 0
+ LOGICAL_MAXIMUM(2), 0xff, 0x7f, // 32767
+ REPORT_SIZE(1), 0x10,
+ REPORT_COUNT(1), 0x02,
+ INPUT(1), 0x02, // Data, Variable, Absolute
+
+ USAGE_PAGE(1), 0x01, // Generic Desktop
+ USAGE(1), 0x38, // scroll
+ LOGICAL_MINIMUM(1), 0x81, // -127
+ LOGICAL_MAXIMUM(1), 0x7f, // 127
+ REPORT_SIZE(1), 0x08,
+ REPORT_COUNT(1), 0x01,
+ INPUT(1), 0x06, // Data, Variable, Relative
+
+ USAGE_PAGE(1), 0x09, // Buttons
+ USAGE_MINIMUM(1), 0x01,
+ USAGE_MAXIMUM(1), 0x03,
+ LOGICAL_MINIMUM(1), 0x00, // 0
+ LOGICAL_MAXIMUM(1), 0x01, // 1
+ REPORT_COUNT(1), 0x03,
+ REPORT_SIZE(1), 0x01,
+ INPUT(1), 0x02, // Data, Variable, Absolute
+ REPORT_COUNT(1), 0x01,
+ REPORT_SIZE(1), 0x05,
+ INPUT(1), 0x01, // Constant
+
+ END_COLLECTION(0),
+ END_COLLECTION(0),
+
+ // Media Control
+ USAGE_PAGE(1), 0x0C,
+ USAGE(1), 0x01,
+ COLLECTION(1), 0x01,
+ REPORT_ID(1), REPORT_ID_VOLUME,
+ USAGE_PAGE(1), 0x0C,
+ LOGICAL_MINIMUM(1), 0x00,
+ LOGICAL_MAXIMUM(1), 0x01,
+ REPORT_SIZE(1), 0x01,
+ REPORT_COUNT(1), 0x07,
+ USAGE(1), 0xB5, // Next Track
+ USAGE(1), 0xB6, // Previous Track
+ USAGE(1), 0xB7, // Stop
+ USAGE(1), 0xCD, // Play / Pause
+ USAGE(1), 0xE2, // Mute
+ USAGE(1), 0xE9, // Volume Up
+ USAGE(1), 0xEA, // Volume Down
+ INPUT(1), 0x02, // Input (Data, Variable, Absolute)
+ REPORT_COUNT(1), 0x01,
+ INPUT(1), 0x01,
+ END_COLLECTION(0),
+ };
+ reportLength = sizeof(reportDescriptor);
+ return reportDescriptor;
+ }
+
+ return NULL;
+}
+
+bool USBMouseKeyboard::EP1_OUT_callback() {
+ uint32_t bytesRead = 0;
+ uint8_t led[65];
+ USBDevice::readEP(EPINT_OUT, led, &bytesRead, MAX_HID_REPORT_SIZE);
+
+ // we take led[1] because led[0] is the report ID
+ lock_status = led[1] & 0x07;
+
+ // We activate the endpoint to be able to recceive data
+ if (!readStart(EPINT_OUT, MAX_HID_REPORT_SIZE))
+ return false;
+ return true;
+}
+
+uint8_t USBMouseKeyboard::lockStatus() {
+ return lock_status;
+}
+
+bool USBMouseKeyboard::update(int16_t x, int16_t y, uint8_t button, int8_t z) {
+ switch (mouse_type) {
+ case REL_MOUSE:
+ while (x > 127) {
+ if (!mouseSend(127, 0, button, z)) return false;
+ x = x - 127;
+ }
+ while (x < -128) {
+ if (!mouseSend(-128, 0, button, z)) return false;
+ x = x + 128;
+ }
+ while (y > 127) {
+ if (!mouseSend(0, 127, button, z)) return false;
+ y = y - 127;
+ }
+ while (y < -128) {
+ if (!mouseSend(0, -128, button, z)) return false;
+ y = y + 128;
+ }
+ return mouseSend(x, y, button, z);
+ case ABS_MOUSE:
+ HID_REPORT report;
+
+ report.data[0] = REPORT_ID_MOUSE;
+ report.data[1] = x & 0xff;
+ report.data[2] = (x >> 8) & 0xff;
+ report.data[3] = y & 0xff;
+ report.data[4] = (y >> 8) & 0xff;
+ report.data[5] = -z;
+ report.data[6] = button & 0x07;
+
+ report.length = 7;
+
+ return send(&report);
+ default:
+ return false;
+ }
+}
+
+bool USBMouseKeyboard::mouseSend(int8_t x, int8_t y, uint8_t buttons, int8_t z) {
+ HID_REPORT report;
+ report.data[0] = REPORT_ID_MOUSE;
+ report.data[1] = buttons & 0x07;
+ report.data[2] = x;
+ report.data[3] = y;
+ report.data[4] = -z; // >0 to scroll down, <0 to scroll up
+
+ report.length = 5;
+
+ return send(&report);
+}
+
+bool USBMouseKeyboard::move(int16_t x, int16_t y) {
+ return update(x, y, button, 0);
+}
+
+bool USBMouseKeyboard::scroll(int8_t z) {
+ return update(0, 0, button, z);
+}
+
+bool USBMouseKeyboard::doubleClick() {
+ if (!click(MOUSE_LEFT))
+ return false;
+ wait(0.1);
+ return click(MOUSE_LEFT);
+}
+
+bool USBMouseKeyboard::click(uint8_t button) {
+ if (!update(0, 0, button, 0))
+ return false;
+ wait(0.01);
+ return update(0, 0, 0, 0);
+}
+
+bool USBMouseKeyboard::press(uint8_t button_) {
+ button = button_ & 0x07;
+ return update(0, 0, button, 0);
+}
+
+bool USBMouseKeyboard::release(uint8_t button_) {
+ button = (button & (~button_)) & 0x07;
+ return update(0, 0, button, 0);
+}
+
+int USBMouseKeyboard::_putc(int c) {
+ return keyCode(c, keymap[c].modifier);
+}
+
+bool USBMouseKeyboard::keyCode(uint8_t key, uint8_t modifier) {
+ // Send a simulated keyboard keypress. Returns true if successful.
+
+ HID_REPORT report;
+
+ report.data[0] = REPORT_ID_KEYBOARD;
+ report.data[1] = modifier;
+ report.data[2] = 0;
+ report.data[3] = keymap[key].usage;
+ report.data[4] = 0;
+ report.data[5] = 0;
+ report.data[6] = 0;
+ report.data[7] = 0;
+ report.data[8] = 0;
+
+ report.length = 9;
+
+ if (!send(&report)) {
+ return false;
+ }
+
+ report.data[1] = 0;
+ report.data[3] = 0;
+
+ if (!send(&report)) {
+ return false;
+ }
+
+ return true;
+
+}
+
+
+bool USBMouseKeyboard::mediaControl(MEDIA_KEY key) {
+ HID_REPORT report;
+
+ report.data[0] = REPORT_ID_VOLUME;
+ report.data[1] = (1 << key) & 0x7f;
+
+ report.length = 2;
+
+ send(&report);
+
+ report.data[0] = REPORT_ID_VOLUME;
+ report.data[1] = 0;
+
+ report.length = 2;
+
+ return send(&report);
+}
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/USBDevice/USBHID/USBMouseKeyboard.h Fri Aug 29 08:33:17 2014 +0000
@@ -0,0 +1,220 @@
+/* Copyright (c) 2010-2011 mbed.org, MIT License
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy of this software
+* and associated documentation files (the "Software"), to deal in the Software without
+* restriction, including without limitation the rights to use, copy, modify, merge, publish,
+* distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the
+* Software is furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in all copies or
+* substantial portions of the Software.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING
+* BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
+* DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+*/
+
+#ifndef USBMOUSEKEYBOARD_H
+#define USBMOUSEKEYBOARD_H
+
+#define REPORT_ID_KEYBOARD 1
+#define REPORT_ID_MOUSE 2
+#define REPORT_ID_VOLUME 3
+
+#include "USBMouse.h"
+#include "USBKeyboard.h"
+#include "Stream.h"
+#include "USBHID.h"
+
+/**
+ * USBMouseKeyboard example
+ * @code
+ *
+ * #include "mbed.h"
+ * #include "USBMouseKeyboard.h"
+ *
+ * USBMouseKeyboard key_mouse;
+ *
+ * int main(void)
+ * {
+ * while(1)
+ * {
+ * key_mouse.move(20, 0);
+ * key_mouse.printf("Hello From MBED\r\n");
+ * wait(1);
+ * }
+ * }
+ * @endcode
+ *
+ *
+ * @code
+ *
+ * #include "mbed.h"
+ * #include "USBMouseKeyboard.h"
+ *
+ * USBMouseKeyboard key_mouse(ABS_MOUSE);
+ *
+ * int main(void)
+ * {
+ * while(1)
+ * {
+ * key_mouse.move(X_MAX_ABS/2, Y_MAX_ABS/2);
+ * key_mouse.printf("Hello from MBED\r\n");
+ * wait(1);
+ * }
+ * }
+ * @endcode
+ */
+class USBMouseKeyboard: public USBHID, public Stream
+{
+ public:
+
+ /**
+ * Constructor
+ *
+ * @param mouse_type Mouse type: ABS_MOUSE (absolute mouse) or REL_MOUSE (relative mouse) (default: REL_MOUSE)
+ * @param leds Leds bus: first: NUM_LOCK, second: CAPS_LOCK, third: SCROLL_LOCK
+ * @param vendor_id Your vendor_id (default: 0x1234)
+ * @param product_id Your product_id (default: 0x0001)
+ * @param product_release Your preoduct_release (default: 0x0001)
+ *
+ */
+ USBMouseKeyboard(MOUSE_TYPE mouse_type = REL_MOUSE, uint16_t vendor_id = 0x0021, uint16_t product_id = 0x0011, uint16_t product_release = 0x0001):
+ USBHID(0, 0, vendor_id, product_id, product_release, false)
+ {
+ lock_status = 0;
+ button = 0;
+ this->mouse_type = mouse_type;
+ connect();
+ };
+
+ /**
+ * Write a state of the mouse
+ *
+ * @param x x-axis position
+ * @param y y-axis position
+ * @param buttons buttons state (first bit represents MOUSE_LEFT, second bit MOUSE_RIGHT and third bit MOUSE_MIDDLE)
+ * @param z wheel state (>0 to scroll down, <0 to scroll up)
+ * @returns true if there is no error, false otherwise
+ */
+ bool update(int16_t x, int16_t y, uint8_t buttons, int8_t z);
+
+
+ /**
+ * Move the cursor to (x, y)
+ *
+ * @param x x-axis position
+ * @param y y-axis position
+ * @returns true if there is no error, false otherwise
+ */
+ bool move(int16_t x, int16_t y);
+
+ /**
+ * Press one or several buttons
+ *
+ * @param button button state (ex: press(MOUSE_LEFT))
+ * @returns true if there is no error, false otherwise
+ */
+ bool press(uint8_t button);
+
+ /**
+ * Release one or several buttons
+ *
+ * @param button button state (ex: release(MOUSE_LEFT))
+ * @returns true if there is no error, false otherwise
+ */
+ bool release(uint8_t button);
+
+ /**
+ * Double click (MOUSE_LEFT)
+ *
+ * @returns true if there is no error, false otherwise
+ */
+ bool doubleClick();
+
+ /**
+ * Click
+ *
+ * @param button state of the buttons ( ex: clic(MOUSE_LEFT))
+ * @returns true if there is no error, false otherwise
+ */
+ bool click(uint8_t button);
+
+ /**
+ * Scrolling
+ *
+ * @param z value of the wheel (>0 to go down, <0 to go up)
+ * @returns true if there is no error, false otherwise
+ */
+ bool scroll(int8_t z);
+
+ /**
+ * To send a character defined by a modifier(CTRL, SHIFT, ALT) and the key
+ *
+ * @code
+ * //To send CTRL + s (save)
+ * keyboard.keyCode('s', KEY_CTRL);
+ * @endcode
+ *
+ * @param modifier bit 0: KEY_CTRL, bit 1: KEY_SHIFT, bit 2: KEY_ALT (default: 0)
+ * @param key character to send
+ * @returns true if there is no error, false otherwise
+ */
+ bool keyCode(uint8_t key, uint8_t modifier = 0);
+
+ /**
+ * Send a character
+ *
+ * @param c character to be sent
+ * @returns true if there is no error, false otherwise
+ */
+ virtual int _putc(int c);
+
+ /**
+ * Control media keys
+ *
+ * @param key media key pressed (KEY_NEXT_TRACK, KEY_PREVIOUS_TRACK, KEY_STOP, KEY_PLAY_PAUSE, KEY_MUTE, KEY_VOLUME_UP, KEY_VOLUME_DOWN)
+ * @returns true if there is no error, false otherwise
+ */
+ bool mediaControl(MEDIA_KEY key);
+
+ /**
+ * Read status of lock keys. Useful to switch-on/off leds according to key pressed. Only the first three bits of the result is important:
+ * - First bit: NUM_LOCK
+ * - Second bit: CAPS_LOCK
+ * - Third bit: SCROLL_LOCK
+ *
+ * @returns status of lock keys
+ */
+ uint8_t lockStatus();
+
+ /*
+ * To define the report descriptor. Warning: this method has to store the length of the report descriptor in reportLength.
+ *
+ * @returns pointer to the report descriptor
+ */
+ virtual uint8_t * reportDesc();
+
+ /*
+ * Called when a data is received on the OUT endpoint. Useful to switch on LED of LOCK keys
+ *
+ * @returns if handle by subclass, return true
+ */
+ virtual bool EP1_OUT_callback();
+
+
+ private:
+ bool mouseWrite(int8_t x, int8_t y, uint8_t buttons, int8_t z);
+ MOUSE_TYPE mouse_type;
+ uint8_t button;
+ bool mouseSend(int8_t x, int8_t y, uint8_t buttons, int8_t z);
+
+ uint8_t lock_status;
+
+ //dummy otherwise it doesn't compile (we must define all methods of an abstract class)
+ virtual int _getc() { return -1;}
+};
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/USBDevice/USBMIDI/MIDIMessage.h Fri Aug 29 08:33:17 2014 +0000
@@ -0,0 +1,251 @@
+/* Copyright (c) 2010-2011 mbed.org, MIT License
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy of this software
+* and associated documentation files (the "Software"), to deal in the Software without
+* restriction, including without limitation the rights to use, copy, modify, merge, publish,
+* distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the
+* Software is furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in all copies or
+* substantial portions of the Software.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING
+* BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
+* DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+*/
+
+#ifndef MIDIMESSAGE_H
+#define MIDIMESSAGE_H
+
+#include "mbed.h"
+
+// MIDI Message Format
+//
+// [ msg(4) | channel(4) ] [ 0 | n(7) ] [ 0 | m(7) ]
+//
+// MIDI Data Messages (Channel Specific)
+//
+// Message msg n m
+// ---------------------------------------------
+// Note Off 0x8 Key Velocity
+// Note On 0x9 Key Velocity
+// Polyphonic Aftertouch 0xA Key Pressure
+// Control Change 0xB Controller Value
+// Program Change 0xC Program -
+// Channel Aftertouch 0xD Pressure -
+// Pitch Wheel 0xE LSB MSB
+
+#define CABLE_NUM (0<<4)
+
+/** A MIDI message container */
+class MIDIMessage {
+public:
+ MIDIMessage() {}
+
+ MIDIMessage(uint8_t *buf) {
+ for (int i = 0; i < 4; i++)
+ data[i] = buf[i];
+ }
+
+ // create messages
+
+ /** Create a NoteOff message
+ * @param key Key ID
+ * @param velocity Key velocity (0-127, default = 127)
+ * @param channel Key channel (0-15, default 0)
+ * @returns A MIDIMessage
+ */
+ static MIDIMessage NoteOff(int key, int velocity = 127, int channel = 0) {
+ MIDIMessage msg;
+ msg.data[0] = CABLE_NUM | 0x08;
+ msg.data[1] = 0x80 | (channel & 0x0F);
+ msg.data[2] = key & 0x7F;
+ msg.data[3] = velocity & 0x7F;
+ return msg;
+ }
+
+ /** Create a NoteOn message
+ * @param key Key ID
+ * @param velocity Key velocity (0-127, default = 127)
+ * @param channel Key channel (0-15, default 0)
+ * @returns A MIDIMessage
+ */
+ static MIDIMessage NoteOn(int key, int velocity = 127, int channel = 0) {
+ MIDIMessage msg;
+ msg.data[0] = CABLE_NUM | 0x09;
+ msg.data[1] = 0x90 | (channel & 0x0F);
+ msg.data[2] = key & 0x7F;
+ msg.data[3] = velocity & 0x7F;
+ return msg;
+ }
+
+ /** Create a PolyPhonic Aftertouch message
+ * @param key Key ID
+ * @param pressure Aftertouch pressure (0-127)
+ * @param channel Key channel (0-15, default 0)
+ * @returns A MIDIMessage
+ */
+ static MIDIMessage PolyphonicAftertouch(int key, int pressure, int channel = 0) {
+ MIDIMessage msg;
+ msg.data[0] = CABLE_NUM | 0x0A;
+ msg.data[1] = 0xA0 | (channel & 0x0F);
+ msg.data[2] = key & 0x7F;
+ msg.data[3] = pressure & 0x7F;
+ return msg;
+ }
+
+ /** Create a Control Change message
+ * @param control Controller ID
+ * @param value Controller value (0-127)
+ * @param channel Controller channel (0-15, default 0)
+ * @returns A MIDIMessage
+ */
+ static MIDIMessage ControlChange(int control, int value, int channel = 0) {
+ MIDIMessage msg;
+ msg.data[0] = CABLE_NUM | 0x0B;
+ msg.data[1] = 0xB0 | (channel & 0x0F);
+ msg.data[2] = control & 0x7F;
+ msg.data[3] = value & 0x7F;
+ return msg;
+ }
+
+ /** Create a Program Change message
+ * @param program Program ID
+ * @param channel Channel (0-15, default 0)
+ * @returns A MIDIMessage
+ */
+ static MIDIMessage ProgramChange(int program, int channel = 0) {
+ MIDIMessage msg;
+ msg.data[0] = CABLE_NUM | 0x0C;
+ msg.data[1] = 0xC0 | (channel & 0x0F);
+ msg.data[2] = program & 0x7F;
+ msg.data[3] = 0x00;
+ return msg;
+ }
+
+ /** Create a Channel Aftertouch message
+ * @param pressure Pressure
+ * @param channel Key channel (0-15, default 0)
+ * @returns A MIDIMessage
+ */
+ static MIDIMessage ChannelAftertouch(int pressure, int channel = 0) {
+ MIDIMessage msg;
+ msg.data[0] = CABLE_NUM | 0x0D;
+ msg.data[1] = 0xD0 | (channel & 0x0F);
+ msg.data[2] = pressure & 0x7F;
+ msg.data[3] = 0x00;
+ return msg;
+ }
+
+ /** Create a Pitch Wheel message
+ * @param pitch Pitch (-8192 - 8191, default = 0)
+ * @param channel Channel (0-15, default 0)
+ * @returns A MIDIMessage
+ */
+ static MIDIMessage PitchWheel(int pitch = 0, int channel = 0) {
+ MIDIMessage msg;
+ int p = pitch + 8192; // 0 - 16383, 8192 is center
+ msg.data[0] = CABLE_NUM | 0x0E;
+ msg.data[1] = 0xE0 | (channel & 0x0F);
+ msg.data[2] = p & 0x7F;
+ msg.data[3] = (p >> 7) & 0x7F;
+ return msg;
+ }
+
+ /** Create an All Notes Off message
+ * @param channel Channel (0-15, default 0)
+ * @returns A MIDIMessage
+ */
+ static MIDIMessage AllNotesOff(int channel = 0) {
+ return ControlChange(123, 0, channel);
+ }
+
+ // decode messages
+
+ /** MIDI Message Types */
+ enum MIDIMessageType {
+ ErrorType,
+ NoteOffType,
+ NoteOnType,
+ PolyphonicAftertouchType,
+ ControlChangeType,
+ ProgramChangeType,
+ ChannelAftertouchType,
+ PitchWheelType,
+ AllNotesOffType
+ };
+
+ /** Read the message type
+ * @returns MIDIMessageType
+ */
+ MIDIMessageType type() {
+ switch((data[1] >> 4) & 0xF) {
+ case 0x8: return NoteOffType;
+ case 0x9: return NoteOnType;
+ case 0xA: return PolyphonicAftertouchType;
+ case 0xB:
+ if(controller() < 120) { // standard controllers
+ return ControlChangeType;
+ } else if(controller() == 123) {
+ return AllNotesOffType;
+ } else {
+ return ErrorType; // unsupported atm
+ }
+ case 0xC: return ProgramChangeType;
+ case 0xD: return ChannelAftertouchType;
+ case 0xE: return PitchWheelType;
+ default: return ErrorType;
+ }
+ }
+
+ /** Read the channel number */
+ int channel() {
+ return (data[1] & 0x0F);
+ }
+
+ /** Read the key ID */
+ int key() {
+ return (data[2] & 0x7F);
+ }
+
+ /** Read the velocity */
+ int velocity() {
+ return (data[3] & 0x7F);
+ }
+
+ /** Read the controller value */
+ int value() {
+ return (data[3] & 0x7F);
+ }
+
+ /** Read the aftertouch pressure */
+ int pressure() {
+ if(type() == PolyphonicAftertouchType) {
+ return (data[3] & 0x7F);
+ } else {
+ return (data[2] & 0x7F);
+ }
+ }
+
+ /** Read the controller number */
+ int controller() {
+ return (data[2] & 0x7F);
+ }
+
+ /** Read the program number */
+ int program() {
+ return (data[2] & 0x7F);
+ }
+
+ /** Read the pitch value */
+ int pitch() {
+ int p = ((data[3] & 0x7F) << 7) | (data[2] & 0x7F);
+ return p - 8192; // 0 - 16383, 8192 is center
+ }
+
+ uint8_t data[4];
+};
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/USBDevice/USBMIDI/USBMIDI.cpp Fri Aug 29 08:33:17 2014 +0000
@@ -0,0 +1,121 @@
+/* Copyright (c) 2010-2011 mbed.org, MIT License
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy of this software
+* and associated documentation files (the "Software"), to deal in the Software without
+* restriction, including without limitation the rights to use, copy, modify, merge, publish,
+* distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the
+* Software is furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in all copies or
+* substantial portions of the Software.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING
+* BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
+* DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+*/
+
+#include "stdint.h"
+#include "USBMIDI.h"
+
+
+USBMIDI::USBMIDI(uint16_t vendor_id, uint16_t product_id, uint16_t product_release): USBDevice(vendor_id, product_id, product_release) {
+ midi_evt = NULL;
+ USBDevice::connect();
+}
+
+void USBMIDI::write(MIDIMessage m) {
+ USBDevice::write(EPBULK_IN, m.data, 4, MAX_PACKET_SIZE_EPBULK);
+}
+
+
+void USBMIDI::attach(void (*fptr)(MIDIMessage)) {
+ midi_evt = fptr;
+}
+
+
+bool USBMIDI::EP2_OUT_callback() {
+ uint8_t buf[64];
+ uint32_t len;
+ readEP(EPBULK_OUT, buf, &len, 64);
+
+ if (midi_evt != NULL) {
+ for (uint32_t i=0; i<len; i+=4) {
+ midi_evt(MIDIMessage(buf+i));
+ }
+ }
+
+ // We reactivate the endpoint to receive next characters
+ readStart(EPBULK_OUT, MAX_PACKET_SIZE_EPBULK);
+ return true;
+}
+
+
+
+// Called in ISR context
+// Set configuration. Return false if the
+// configuration is not supported.
+bool USBMIDI::USBCallback_setConfiguration(uint8_t configuration) {
+ if (configuration != DEFAULT_CONFIGURATION) {
+ return false;
+ }
+
+ // Configure endpoints > 0
+ addEndpoint(EPBULK_IN, MAX_PACKET_SIZE_EPBULK);
+ addEndpoint(EPBULK_OUT, MAX_PACKET_SIZE_EPBULK);
+
+ // We activate the endpoint to be able to receive data
+ readStart(EPBULK_OUT, MAX_PACKET_SIZE_EPBULK);
+ return true;
+}
+
+
+uint8_t * USBMIDI::stringIinterfaceDesc() {
+ static uint8_t stringIinterfaceDescriptor[] = {
+ 0x0c, //bLength
+ STRING_DESCRIPTOR, //bDescriptorType 0x03
+ 'A',0,'u',0,'d',0,'i',0,'o',0 //bString iInterface - Audio
+ };
+ return stringIinterfaceDescriptor;
+}
+
+uint8_t * USBMIDI::stringIproductDesc() {
+ static uint8_t stringIproductDescriptor[] = {
+ 0x16, //bLength
+ STRING_DESCRIPTOR, //bDescriptorType 0x03
+ 'M',0,'b',0,'e',0,'d',0,' ',0,'A',0,'u',0,'d',0,'i',0,'o',0 //bString iProduct - Mbed Audio
+ };
+ return stringIproductDescriptor;
+}
+
+
+uint8_t * USBMIDI::configurationDesc() {
+ static uint8_t configDescriptor[] = {
+ // configuration descriptor
+ 0x09, 0x02, 0x65, 0x00, 0x02, 0x01, 0x00, 0xc0, 0x50,
+
+ // The Audio Interface Collection
+ 0x09, 0x04, 0x00, 0x00, 0x00, 0x01, 0x01, 0x00, 0x00, // Standard AC Interface Descriptor
+ 0x09, 0x24, 0x01, 0x00, 0x01, 0x09, 0x00, 0x01, 0x01, // Class-specific AC Interface Descriptor
+ 0x09, 0x04, 0x01, 0x00, 0x02, 0x01, 0x03, 0x00, 0x00, // MIDIStreaming Interface Descriptors
+ 0x07, 0x24, 0x01, 0x00, 0x01, 0x41, 0x00, // Class-Specific MS Interface Header Descriptor
+
+ // MIDI IN JACKS
+ 0x06, 0x24, 0x02, 0x01, 0x01, 0x00,
+ 0x06, 0x24, 0x02, 0x02, 0x02, 0x00,
+
+ // MIDI OUT JACKS
+ 0x09, 0x24, 0x03, 0x01, 0x03, 0x01, 0x02, 0x01, 0x00,
+ 0x09, 0x24, 0x03, 0x02, 0x06, 0x01, 0x01, 0x01, 0x00,
+
+ // OUT endpoint descriptor
+ 0x09, 0x05, 0x02, 0x02, 0x40, 0x00, 0x00, 0x00, 0x00,
+ 0x05, 0x25, 0x01, 0x01, 0x01,
+
+ // IN endpoint descriptor
+ 0x09, 0x05, 0x82, 0x02, 0x40, 0x00, 0x00, 0x00, 0x00,
+ 0x05, 0x25, 0x01, 0x01, 0x03,
+ };
+ return configDescriptor;
+}
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/USBDevice/USBMIDI/USBMIDI.h Fri Aug 29 08:33:17 2014 +0000
@@ -0,0 +1,109 @@
+/* Copyright (c) 2010-2011 mbed.org, MIT License
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy of this software
+* and associated documentation files (the "Software"), to deal in the Software without
+* restriction, including without limitation the rights to use, copy, modify, merge, publish,
+* distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the
+* Software is furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in all copies or
+* substantial portions of the Software.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING
+* BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
+* DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+*/
+
+#ifndef USBMIDI_H
+#define USBMIDI_H
+
+/* These headers are included for child class. */
+#include "USBEndpoints.h"
+#include "USBDescriptor.h"
+#include "USBDevice_Types.h"
+
+#include "USBDevice.h"
+#include "MIDIMessage.h"
+
+#define DEFAULT_CONFIGURATION (1)
+
+/**
+* USBMIDI example
+*
+* @code
+* #include "mbed.h"
+* #include "USBMIDI.h"
+*
+* USBMIDI midi;
+*
+* int main() {
+* while (1) {
+* for(int i=48; i<83; i++) { // send some messages!
+* midi.write(MIDIMessage::NoteOn(i));
+* wait(0.25);
+* midi.write(MIDIMessage::NoteOff(i));
+* wait(0.5);
+* }
+* }
+* }
+* @endcode
+*/
+class USBMIDI: public USBDevice {
+public:
+
+ /**
+ * Constructor
+ *
+ * @param vendor_id Your vendor_id
+ * @param product_id Your product_id
+ * @param product_release Your preoduct_release
+ */
+ USBMIDI(uint16_t vendor_id = 0x0700, uint16_t product_id = 0x0101, uint16_t product_release = 0x0001);
+
+ /**
+ * Send a MIDIMessage
+ *
+ * @param m The MIDIMessage to send
+ */
+ void write(MIDIMessage m);
+
+ /**
+ * Attach a callback for when a MIDIEvent is received
+ *
+ * @param fptr function pointer
+ */
+ void attach(void (*fptr)(MIDIMessage));
+
+
+protected:
+ virtual bool EP2_OUT_callback();
+ virtual bool USBCallback_setConfiguration(uint8_t configuration);
+ /*
+ * Get string product descriptor
+ *
+ * @returns pointer to the string product descriptor
+ */
+ virtual uint8_t * stringIproductDesc();
+
+ /*
+ * Get string interface descriptor
+ *
+ * @returns pointer to the string interface descriptor
+ */
+ virtual uint8_t * stringIinterfaceDesc();
+
+ /*
+ * Get configuration descriptor
+ *
+ * @returns pointer to the configuration descriptor
+ */
+ virtual uint8_t * configurationDesc();
+
+private:
+ void (*midi_evt)(MIDIMessage);
+
+};
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/USBDevice/USBMSD/USBMSD.cpp Fri Aug 29 08:33:17 2014 +0000
@@ -0,0 +1,655 @@
+/* Copyright (c) 2010-2011 mbed.org, MIT License
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy of this software
+* and associated documentation files (the "Software"), to deal in the Software without
+* restriction, including without limitation the rights to use, copy, modify, merge, publish,
+* distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the
+* Software is furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in all copies or
+* substantial portions of the Software.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING
+* BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
+* DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+*/
+
+#include "stdint.h"
+#include "USBMSD.h"
+
+#define DISK_OK 0x00
+#define NO_INIT 0x01
+#define NO_DISK 0x02
+#define WRITE_PROTECT 0x04
+
+#define CBW_Signature 0x43425355
+#define CSW_Signature 0x53425355
+
+// SCSI Commands
+#define TEST_UNIT_READY 0x00
+#define REQUEST_SENSE 0x03
+#define FORMAT_UNIT 0x04
+#define INQUIRY 0x12
+#define MODE_SELECT6 0x15
+#define MODE_SENSE6 0x1A
+#define START_STOP_UNIT 0x1B
+#define MEDIA_REMOVAL 0x1E
+#define READ_FORMAT_CAPACITIES 0x23
+#define READ_CAPACITY 0x25
+#define READ10 0x28
+#define WRITE10 0x2A
+#define VERIFY10 0x2F
+#define READ12 0xA8
+#define WRITE12 0xAA
+#define MODE_SELECT10 0x55
+#define MODE_SENSE10 0x5A
+
+// MSC class specific requests
+#define MSC_REQUEST_RESET 0xFF
+#define MSC_REQUEST_GET_MAX_LUN 0xFE
+
+#define DEFAULT_CONFIGURATION (1)
+
+// max packet size
+#define MAX_PACKET MAX_PACKET_SIZE_EPBULK
+
+// CSW Status
+enum Status {
+ CSW_PASSED,
+ CSW_FAILED,
+ CSW_ERROR,
+};
+
+
+USBMSD::USBMSD(uint16_t vendor_id, uint16_t product_id, uint16_t product_release): USBDevice(vendor_id, product_id, product_release) {
+ stage = READ_CBW;
+ memset((void *)&cbw, 0, sizeof(CBW));
+ memset((void *)&csw, 0, sizeof(CSW));
+ page = NULL;
+}
+
+USBMSD::~USBMSD() {
+ disconnect();
+}
+
+
+// Called in ISR context to process a class specific request
+bool USBMSD::USBCallback_request(void) {
+
+ bool success = false;
+ CONTROL_TRANSFER * transfer = getTransferPtr();
+ static uint8_t maxLUN[1] = {0};
+
+ if (transfer->setup.bmRequestType.Type == CLASS_TYPE) {
+ switch (transfer->setup.bRequest) {
+ case MSC_REQUEST_RESET:
+ reset();
+ success = true;
+ break;
+ case MSC_REQUEST_GET_MAX_LUN:
+ transfer->remaining = 1;
+ transfer->ptr = maxLUN;
+ transfer->direction = DEVICE_TO_HOST;
+ success = true;
+ break;
+ default:
+ break;
+ }
+ }
+
+ return success;
+}
+
+
+bool USBMSD::connect(bool blocking) {
+ //disk initialization
+ if (disk_status() & NO_INIT) {
+ if (disk_initialize()) {
+ return false;
+ }
+ }
+
+ // get number of blocks
+ BlockCount = disk_sectors();
+
+ // get memory size
+ MemorySize = disk_size();
+
+ if (BlockCount > 0) {
+ BlockSize = MemorySize / BlockCount;
+ if (BlockSize != 0) {
+ free(page);
+ page = (uint8_t *)malloc(BlockSize * sizeof(uint8_t));
+ if (page == NULL)
+ return false;
+ }
+ } else {
+ return false;
+ }
+
+ //connect the device
+ USBDevice::connect(blocking);
+ return true;
+}
+
+void USBMSD::disconnect() {
+ //De-allocate MSD page size:
+ free(page);
+ page = NULL;
+ USBDevice::disconnect();
+}
+
+void USBMSD::reset() {
+ stage = READ_CBW;
+}
+
+
+// Called in ISR context called when a data is received
+bool USBMSD::EP2_OUT_callback() {
+ uint32_t size = 0;
+ uint8_t buf[MAX_PACKET_SIZE_EPBULK];
+ readEP(EPBULK_OUT, buf, &size, MAX_PACKET_SIZE_EPBULK);
+ switch (stage) {
+ // the device has to decode the CBW received
+ case READ_CBW:
+ CBWDecode(buf, size);
+ break;
+
+ // the device has to receive data from the host
+ case PROCESS_CBW:
+ switch (cbw.CB[0]) {
+ case WRITE10:
+ case WRITE12:
+ memoryWrite(buf, size);
+ break;
+ case VERIFY10:
+ memoryVerify(buf, size);
+ break;
+ }
+ break;
+
+ // an error has occured: stall endpoint and send CSW
+ default:
+ stallEndpoint(EPBULK_OUT);
+ csw.Status = CSW_ERROR;
+ sendCSW();
+ break;
+ }
+
+ //reactivate readings on the OUT bulk endpoint
+ readStart(EPBULK_OUT, MAX_PACKET_SIZE_EPBULK);
+ return true;
+}
+
+// Called in ISR context when a data has been transferred
+bool USBMSD::EP2_IN_callback() {
+ switch (stage) {
+
+ // the device has to send data to the host
+ case PROCESS_CBW:
+ switch (cbw.CB[0]) {
+ case READ10:
+ case READ12:
+ memoryRead();
+ break;
+ }
+ break;
+
+ //the device has to send a CSW
+ case SEND_CSW:
+ sendCSW();
+ break;
+
+ // the host has received the CSW -> we wait a CBW
+ case WAIT_CSW:
+ stage = READ_CBW;
+ break;
+
+ // an error has occured
+ default:
+ stallEndpoint(EPBULK_IN);
+ sendCSW();
+ break;
+ }
+ return true;
+}
+
+
+void USBMSD::memoryWrite (uint8_t * buf, uint16_t size) {
+
+ if ((addr + size) > MemorySize) {
+ size = MemorySize - addr;
+ stage = ERROR;
+ stallEndpoint(EPBULK_OUT);
+ }
+
+ // we fill an array in RAM of 1 block before writing it in memory
+ for (int i = 0; i < size; i++)
+ page[addr%BlockSize + i] = buf[i];
+
+ // if the array is filled, write it in memory
+ if (!((addr + size)%BlockSize)) {
+ if (!(disk_status() & WRITE_PROTECT)) {
+ disk_write(page, addr/BlockSize);
+ }
+ }
+
+ addr += size;
+ length -= size;
+ csw.DataResidue -= size;
+
+ if ((!length) || (stage != PROCESS_CBW)) {
+ csw.Status = (stage == ERROR) ? CSW_FAILED : CSW_PASSED;
+ sendCSW();
+ }
+}
+
+void USBMSD::memoryVerify (uint8_t * buf, uint16_t size) {
+ uint32_t n;
+
+ if ((addr + size) > MemorySize) {
+ size = MemorySize - addr;
+ stage = ERROR;
+ stallEndpoint(EPBULK_OUT);
+ }
+
+ // beginning of a new block -> load a whole block in RAM
+ if (!(addr%BlockSize))
+ disk_read(page, addr/BlockSize);
+
+ // info are in RAM -> no need to re-read memory
+ for (n = 0; n < size; n++) {
+ if (page[addr%BlockSize + n] != buf[n]) {
+ memOK = false;
+ break;
+ }
+ }
+
+ addr += size;
+ length -= size;
+ csw.DataResidue -= size;
+
+ if ( !length || (stage != PROCESS_CBW)) {
+ csw.Status = (memOK && (stage == PROCESS_CBW)) ? CSW_PASSED : CSW_FAILED;
+ sendCSW();
+ }
+}
+
+
+bool USBMSD::inquiryRequest (void) {
+ uint8_t inquiry[] = { 0x00, 0x80, 0x00, 0x01,
+ 36 - 4, 0x80, 0x00, 0x00,
+ 'M', 'B', 'E', 'D', '.', 'O', 'R', 'G',
+ 'M', 'B', 'E', 'D', ' ', 'U', 'S', 'B', ' ', 'D', 'I', 'S', 'K', ' ', ' ', ' ',
+ '1', '.', '0', ' ',
+ };
+ if (!write(inquiry, sizeof(inquiry))) {
+ return false;
+ }
+ return true;
+}
+
+
+bool USBMSD::readFormatCapacity() {
+ uint8_t capacity[] = { 0x00, 0x00, 0x00, 0x08,
+ (uint8_t)((BlockCount >> 24) & 0xff),
+ (uint8_t)((BlockCount >> 16) & 0xff),
+ (uint8_t)((BlockCount >> 8) & 0xff),
+ (uint8_t)((BlockCount >> 0) & 0xff),
+
+ 0x02,
+ (uint8_t)((BlockSize >> 16) & 0xff),
+ (uint8_t)((BlockSize >> 8) & 0xff),
+ (uint8_t)((BlockSize >> 0) & 0xff),
+ };
+ if (!write(capacity, sizeof(capacity))) {
+ return false;
+ }
+ return true;
+}
+
+
+bool USBMSD::readCapacity (void) {
+ uint8_t capacity[] = {
+ (uint8_t)(((BlockCount - 1) >> 24) & 0xff),
+ (uint8_t)(((BlockCount - 1) >> 16) & 0xff),
+ (uint8_t)(((BlockCount - 1) >> 8) & 0xff),
+ (uint8_t)(((BlockCount - 1) >> 0) & 0xff),
+
+ (uint8_t)((BlockSize >> 24) & 0xff),
+ (uint8_t)((BlockSize >> 16) & 0xff),
+ (uint8_t)((BlockSize >> 8) & 0xff),
+ (uint8_t)((BlockSize >> 0) & 0xff),
+ };
+ if (!write(capacity, sizeof(capacity))) {
+ return false;
+ }
+ return true;
+}
+
+bool USBMSD::write (uint8_t * buf, uint16_t size) {
+
+ if (size >= cbw.DataLength) {
+ size = cbw.DataLength;
+ }
+ stage = SEND_CSW;
+
+ if (!writeNB(EPBULK_IN, buf, size, MAX_PACKET_SIZE_EPBULK)) {
+ return false;
+ }
+
+ csw.DataResidue -= size;
+ csw.Status = CSW_PASSED;
+ return true;
+}
+
+
+bool USBMSD::modeSense6 (void) {
+ uint8_t sense6[] = { 0x03, 0x00, 0x00, 0x00 };
+ if (!write(sense6, sizeof(sense6))) {
+ return false;
+ }
+ return true;
+}
+
+void USBMSD::sendCSW() {
+ csw.Signature = CSW_Signature;
+ writeNB(EPBULK_IN, (uint8_t *)&csw, sizeof(CSW), MAX_PACKET_SIZE_EPBULK);
+ stage = WAIT_CSW;
+}
+
+bool USBMSD::requestSense (void) {
+ uint8_t request_sense[] = {
+ 0x70,
+ 0x00,
+ 0x05, // Sense Key: illegal request
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x0A,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x30,
+ 0x01,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ };
+
+ if (!write(request_sense, sizeof(request_sense))) {
+ return false;
+ }
+
+ return true;
+}
+
+void USBMSD::fail() {
+ csw.Status = CSW_FAILED;
+ sendCSW();
+}
+
+
+void USBMSD::CBWDecode(uint8_t * buf, uint16_t size) {
+ if (size == sizeof(cbw)) {
+ memcpy((uint8_t *)&cbw, buf, size);
+ if (cbw.Signature == CBW_Signature) {
+ csw.Tag = cbw.Tag;
+ csw.DataResidue = cbw.DataLength;
+ if ((cbw.CBLength < 1) || (cbw.CBLength > 16) ) {
+ fail();
+ } else {
+ switch (cbw.CB[0]) {
+ case TEST_UNIT_READY:
+ testUnitReady();
+ break;
+ case REQUEST_SENSE:
+ requestSense();
+ break;
+ case INQUIRY:
+ inquiryRequest();
+ break;
+ case MODE_SENSE6:
+ modeSense6();
+ break;
+ case READ_FORMAT_CAPACITIES:
+ readFormatCapacity();
+ break;
+ case READ_CAPACITY:
+ readCapacity();
+ break;
+ case READ10:
+ case READ12:
+ if (infoTransfer()) {
+ if ((cbw.Flags & 0x80)) {
+ stage = PROCESS_CBW;
+ memoryRead();
+ } else {
+ stallEndpoint(EPBULK_OUT);
+ csw.Status = CSW_ERROR;
+ sendCSW();
+ }
+ }
+ break;
+ case WRITE10:
+ case WRITE12:
+ if (infoTransfer()) {
+ if (!(cbw.Flags & 0x80)) {
+ stage = PROCESS_CBW;
+ } else {
+ stallEndpoint(EPBULK_IN);
+ csw.Status = CSW_ERROR;
+ sendCSW();
+ }
+ }
+ break;
+ case VERIFY10:
+ if (!(cbw.CB[1] & 0x02)) {
+ csw.Status = CSW_PASSED;
+ sendCSW();
+ break;
+ }
+ if (infoTransfer()) {
+ if (!(cbw.Flags & 0x80)) {
+ stage = PROCESS_CBW;
+ memOK = true;
+ } else {
+ stallEndpoint(EPBULK_IN);
+ csw.Status = CSW_ERROR;
+ sendCSW();
+ }
+ }
+ break;
+ case MEDIA_REMOVAL:
+ csw.Status = CSW_PASSED;
+ sendCSW();
+ break;
+ default:
+ fail();
+ break;
+ }
+ }
+ }
+ }
+}
+
+void USBMSD::testUnitReady (void) {
+
+ if (cbw.DataLength != 0) {
+ if ((cbw.Flags & 0x80) != 0) {
+ stallEndpoint(EPBULK_IN);
+ } else {
+ stallEndpoint(EPBULK_OUT);
+ }
+ }
+
+ csw.Status = CSW_PASSED;
+ sendCSW();
+}
+
+
+void USBMSD::memoryRead (void) {
+ uint32_t n;
+
+ n = (length > MAX_PACKET) ? MAX_PACKET : length;
+
+ if ((addr + n) > MemorySize) {
+ n = MemorySize - addr;
+ stage = ERROR;
+ }
+
+ // we read an entire block
+ if (!(addr%BlockSize))
+ disk_read(page, addr/BlockSize);
+
+ // write data which are in RAM
+ writeNB(EPBULK_IN, &page[addr%BlockSize], n, MAX_PACKET_SIZE_EPBULK);
+
+ addr += n;
+ length -= n;
+
+ csw.DataResidue -= n;
+
+ if ( !length || (stage != PROCESS_CBW)) {
+ csw.Status = (stage == PROCESS_CBW) ? CSW_PASSED : CSW_FAILED;
+ stage = (stage == PROCESS_CBW) ? SEND_CSW : stage;
+ }
+}
+
+
+bool USBMSD::infoTransfer (void) {
+ uint32_t n;
+
+ // Logical Block Address of First Block
+ n = (cbw.CB[2] << 24) | (cbw.CB[3] << 16) | (cbw.CB[4] << 8) | (cbw.CB[5] << 0);
+
+ addr = n * BlockSize;
+
+ // Number of Blocks to transfer
+ switch (cbw.CB[0]) {
+ case READ10:
+ case WRITE10:
+ case VERIFY10:
+ n = (cbw.CB[7] << 8) | (cbw.CB[8] << 0);
+ break;
+
+ case READ12:
+ case WRITE12:
+ n = (cbw.CB[6] << 24) | (cbw.CB[7] << 16) | (cbw.CB[8] << 8) | (cbw.CB[9] << 0);
+ break;
+ }
+
+ length = n * BlockSize;
+
+ if (!cbw.DataLength) { // host requests no data
+ csw.Status = CSW_FAILED;
+ sendCSW();
+ return false;
+ }
+
+ if (cbw.DataLength != length) {
+ if ((cbw.Flags & 0x80) != 0) {
+ stallEndpoint(EPBULK_IN);
+ } else {
+ stallEndpoint(EPBULK_OUT);
+ }
+
+ csw.Status = CSW_FAILED;
+ sendCSW();
+ return false;
+ }
+
+ return true;
+}
+
+
+
+
+
+// Called in ISR context
+// Set configuration. Return false if the
+// configuration is not supported.
+bool USBMSD::USBCallback_setConfiguration(uint8_t configuration) {
+ if (configuration != DEFAULT_CONFIGURATION) {
+ return false;
+ }
+
+ // Configure endpoints > 0
+ addEndpoint(EPBULK_IN, MAX_PACKET_SIZE_EPBULK);
+ addEndpoint(EPBULK_OUT, MAX_PACKET_SIZE_EPBULK);
+
+ //activate readings
+ readStart(EPBULK_OUT, MAX_PACKET_SIZE_EPBULK);
+ return true;
+}
+
+
+uint8_t * USBMSD::stringIinterfaceDesc() {
+ static uint8_t stringIinterfaceDescriptor[] = {
+ 0x08, //bLength
+ STRING_DESCRIPTOR, //bDescriptorType 0x03
+ 'M',0,'S',0,'D',0 //bString iInterface - MSD
+ };
+ return stringIinterfaceDescriptor;
+}
+
+uint8_t * USBMSD::stringIproductDesc() {
+ static uint8_t stringIproductDescriptor[] = {
+ 0x12, //bLength
+ STRING_DESCRIPTOR, //bDescriptorType 0x03
+ 'M',0,'b',0,'e',0,'d',0,' ',0,'M',0,'S',0,'D',0 //bString iProduct - Mbed Audio
+ };
+ return stringIproductDescriptor;
+}
+
+
+uint8_t * USBMSD::configurationDesc() {
+ static uint8_t configDescriptor[] = {
+
+ // Configuration 1
+ 9, // bLength
+ 2, // bDescriptorType
+ LSB(9 + 9 + 7 + 7), // wTotalLength
+ MSB(9 + 9 + 7 + 7),
+ 0x01, // bNumInterfaces
+ 0x01, // bConfigurationValue: 0x01 is used to select this configuration
+ 0x00, // iConfiguration: no string to describe this configuration
+ 0xC0, // bmAttributes
+ 100, // bMaxPower, device power consumption is 100 mA
+
+ // Interface 0, Alternate Setting 0, MSC Class
+ 9, // bLength
+ 4, // bDescriptorType
+ 0x00, // bInterfaceNumber
+ 0x00, // bAlternateSetting
+ 0x02, // bNumEndpoints
+ 0x08, // bInterfaceClass
+ 0x06, // bInterfaceSubClass
+ 0x50, // bInterfaceProtocol
+ 0x04, // iInterface
+
+ // endpoint descriptor, USB spec 9.6.6, page 269-271, Table 9-13
+ 7, // bLength
+ 5, // bDescriptorType
+ PHY_TO_DESC(EPBULK_IN), // bEndpointAddress
+ 0x02, // bmAttributes (0x02=bulk)
+ LSB(MAX_PACKET_SIZE_EPBULK),// wMaxPacketSize (LSB)
+ MSB(MAX_PACKET_SIZE_EPBULK),// wMaxPacketSize (MSB)
+ 0, // bInterval
+
+ // endpoint descriptor, USB spec 9.6.6, page 269-271, Table 9-13
+ 7, // bLength
+ 5, // bDescriptorType
+ PHY_TO_DESC(EPBULK_OUT), // bEndpointAddress
+ 0x02, // bmAttributes (0x02=bulk)
+ LSB(MAX_PACKET_SIZE_EPBULK),// wMaxPacketSize (LSB)
+ MSB(MAX_PACKET_SIZE_EPBULK),// wMaxPacketSize (MSB)
+ 0 // bInterval
+ };
+ return configDescriptor;
+}
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/USBDevice/USBMSD/USBMSD.h Fri Aug 29 08:33:17 2014 +0000
@@ -0,0 +1,249 @@
+/* Copyright (c) 2010-2011 mbed.org, MIT License
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy of this software
+* and associated documentation files (the "Software"), to deal in the Software without
+* restriction, including without limitation the rights to use, copy, modify, merge, publish,
+* distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the
+* Software is furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in all copies or
+* substantial portions of the Software.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING
+* BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
+* DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+*/
+
+
+#ifndef USBMSD_H
+#define USBMSD_H
+
+/* These headers are included for child class. */
+#include "USBEndpoints.h"
+#include "USBDescriptor.h"
+#include "USBDevice_Types.h"
+
+#include "USBDevice.h"
+
+/**
+ * USBMSD class: generic class in order to use all kinds of blocks storage chip
+ *
+ * Introduction
+ *
+ * The USBMSD implements the MSD protocol. It permits to access a memory chip (flash, sdcard,...)
+ * from a computer over USB. But this class doesn't work standalone, you need to subclass this class
+ * and define virtual functions which are called in USBMSD.
+ *
+ * How to use this class with your chip ?
+ *
+ * You have to inherit and define some pure virtual functions (mandatory step):
+ * - virtual int disk_read(char * data, int block): function to read a block
+ * - virtual int disk_write(const char * data, int block): function to write a block
+ * - virtual int disk_initialize(): function to initialize the memory
+ * - virtual int disk_sectors(): return the number of blocks
+ * - virtual int disk_size(): return the memory size
+ * - virtual int disk_status(): return the status of the storage chip (0: OK, 1: not initialized, 2: no medium in the drive, 4: write protection)
+ *
+ * All functions names are compatible with the fat filesystem library. So you can imagine using your own class with
+ * USBMSD and the fat filesystem library in the same program. Just be careful because there are two different parts which
+ * will access the sd card. You can do a master/slave system using the disk_status method.
+ *
+ * Once these functions defined, you can call connect() (at the end of the constructor of your class for instance)
+ * of USBMSD to connect your mass storage device. connect() will first call disk_status() to test the status of the disk.
+ * If disk_status() returns 1 (disk not initialized), then disk_initialize() is called. After this step, connect() will collect information
+ * such as the number of blocks and the memory size.
+ */
+class USBMSD: public USBDevice {
+public:
+
+ /**
+ * Constructor
+ *
+ * @param vendor_id Your vendor_id
+ * @param product_id Your product_id
+ * @param product_release Your preoduct_release
+ */
+ USBMSD(uint16_t vendor_id = 0x0703, uint16_t product_id = 0x0104, uint16_t product_release = 0x0001);
+
+ /**
+ * Connect the USB MSD device. Establish disk initialization before really connect the device.
+ *
+ * @param blocking if not configured
+ * @returns true if successful
+ */
+ bool connect(bool blocking = true);
+
+ /**
+ * Disconnect the USB MSD device.
+ */
+ void disconnect();
+
+ /**
+ * Destructor
+ */
+ ~USBMSD();
+
+protected:
+
+ /*
+ * read a block on a storage chip
+ *
+ * @param data pointer where will be stored read data
+ * @param block block number
+ * @returns 0 if successful
+ */
+ virtual int disk_read(uint8_t * data, uint64_t block) = 0;
+
+ /*
+ * write a block on a storage chip
+ *
+ * @param data data to write
+ * @param block block number
+ * @returns 0 if successful
+ */
+ virtual int disk_write(const uint8_t * data, uint64_t block) = 0;
+
+ /*
+ * Disk initilization
+ */
+ virtual int disk_initialize() = 0;
+
+ /*
+ * Return the number of blocks
+ *
+ * @returns number of blocks
+ */
+ virtual uint64_t disk_sectors() = 0;
+
+ /*
+ * Return memory size
+ *
+ * @returns memory size
+ */
+ virtual uint64_t disk_size() = 0;
+
+
+ /*
+ * To check the status of the storage chip
+ *
+ * @returns status: 0: OK, 1: disk not initialized, 2: no medium in the drive, 4: write protected
+ */
+ virtual int disk_status() = 0;
+
+ /*
+ * Get string product descriptor
+ *
+ * @returns pointer to the string product descriptor
+ */
+ virtual uint8_t * stringIproductDesc();
+
+ /*
+ * Get string interface descriptor
+ *
+ * @returns pointer to the string interface descriptor
+ */
+ virtual uint8_t * stringIinterfaceDesc();
+
+ /*
+ * Get configuration descriptor
+ *
+ * @returns pointer to the configuration descriptor
+ */
+ virtual uint8_t * configurationDesc();
+
+ /*
+ * Callback called when a packet is received
+ */
+ virtual bool EP2_OUT_callback();
+
+ /*
+ * Callback called when a packet has been sent
+ */
+ virtual bool EP2_IN_callback();
+
+ /*
+ * Set configuration of device. Add endpoints
+ */
+ virtual bool USBCallback_setConfiguration(uint8_t configuration);
+
+ /*
+ * Callback called to process class specific requests
+ */
+ virtual bool USBCallback_request();
+
+
+private:
+
+ // MSC Bulk-only Stage
+ enum Stage {
+ READ_CBW, // wait a CBW
+ ERROR, // error
+ PROCESS_CBW, // process a CBW request
+ SEND_CSW, // send a CSW
+ WAIT_CSW, // wait that a CSW has been effectively sent
+ };
+
+ // Bulk-only CBW
+ typedef struct {
+ uint32_t Signature;
+ uint32_t Tag;
+ uint32_t DataLength;
+ uint8_t Flags;
+ uint8_t LUN;
+ uint8_t CBLength;
+ uint8_t CB[16];
+ } PACKED CBW;
+
+ // Bulk-only CSW
+ typedef struct {
+ uint32_t Signature;
+ uint32_t Tag;
+ uint32_t DataResidue;
+ uint8_t Status;
+ } PACKED CSW;
+
+ //state of the bulk-only state machine
+ Stage stage;
+
+ // current CBW
+ CBW cbw;
+
+ // CSW which will be sent
+ CSW csw;
+
+ // addr where will be read or written data
+ uint32_t addr;
+
+ // length of a reading or writing
+ uint32_t length;
+
+ // memory OK (after a memoryVerify)
+ bool memOK;
+
+ // cache in RAM before writing in memory. Useful also to read a block.
+ uint8_t * page;
+
+ int BlockSize;
+ uint64_t MemorySize;
+ uint64_t BlockCount;
+
+ void CBWDecode(uint8_t * buf, uint16_t size);
+ void sendCSW (void);
+ bool inquiryRequest (void);
+ bool write (uint8_t * buf, uint16_t size);
+ bool readFormatCapacity();
+ bool readCapacity (void);
+ bool infoTransfer (void);
+ void memoryRead (void);
+ bool modeSense6 (void);
+ void testUnitReady (void);
+ bool requestSense (void);
+ void memoryVerify (uint8_t * buf, uint16_t size);
+ void memoryWrite (uint8_t * buf, uint16_t size);
+ void reset();
+ void fail();
+};
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/USBDevice/USBSerial/CircBuffer.h Fri Aug 29 08:33:17 2014 +0000
@@ -0,0 +1,73 @@
+/* Copyright (c) 2010-2011 mbed.org, MIT License
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy of this software
+* and associated documentation files (the "Software"), to deal in the Software without
+* restriction, including without limitation the rights to use, copy, modify, merge, publish,
+* distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the
+* Software is furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in all copies or
+* substantial portions of the Software.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING
+* BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
+* DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+*/
+
+#ifndef CIRCBUFFER_H
+#define CIRCBUFFER_H
+
+template <class T>
+class CircBuffer {
+public:
+ CircBuffer(int length) {
+ write = 0;
+ read = 0;
+ size = length + 1;
+ buf = (T *)malloc(size * sizeof(T));
+ };
+
+ ~CircBuffer() {
+ free(buf);
+ }
+
+ bool isFull() {
+ return ((write + 1) % size == read);
+ };
+
+ bool isEmpty() {
+ return (read == write);
+ };
+
+ void queue(T k) {
+ if (isFull()) {
+ read++;
+ read %= size;
+ }
+ buf[write++] = k;
+ write %= size;
+ }
+
+ uint16_t available() {
+ return (write >= read) ? write - read : size - read + write;
+ };
+
+ bool dequeue(T * c) {
+ bool empty = isEmpty();
+ if (!empty) {
+ *c = buf[read++];
+ read %= size;
+ }
+ return(!empty);
+ };
+
+private:
+ volatile uint16_t write;
+ volatile uint16_t read;
+ uint16_t size;
+ T * buf;
+};
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/USBDevice/USBSerial/USBCDC.cpp Fri Aug 29 08:33:17 2014 +0000
@@ -0,0 +1,279 @@
+/* Copyright (c) 2010-2011 mbed.org, MIT License
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy of this software
+* and associated documentation files (the "Software"), to deal in the Software without
+* restriction, including without limitation the rights to use, copy, modify, merge, publish,
+* distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the
+* Software is furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in all copies or
+* substantial portions of the Software.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING
+* BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
+* DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+*/
+
+#include "stdint.h"
+#include "USBCDC.h"
+
+static uint8_t cdc_line_coding[7]= {0x80, 0x25, 0x00, 0x00, 0x00, 0x00, 0x08};
+
+#define DEFAULT_CONFIGURATION (1)
+
+#define CDC_SET_LINE_CODING 0x20
+#define CDC_GET_LINE_CODING 0x21
+#define CDC_SET_CONTROL_LINE_STATE 0x22
+
+#define MAX_CDC_REPORT_SIZE MAX_PACKET_SIZE_EPBULK
+
+USBCDC::USBCDC(uint16_t vendor_id, uint16_t product_id, uint16_t product_release, bool connect_blocking): USBDevice(vendor_id, product_id, product_release) {
+ terminal_connected = false;
+ USBDevice::connect(connect_blocking);
+}
+
+bool USBCDC::USBCallback_request(void) {
+ /* Called in ISR context */
+
+ bool success = false;
+ CONTROL_TRANSFER * transfer = getTransferPtr();
+
+ /* Process class-specific requests */
+
+ if (transfer->setup.bmRequestType.Type == CLASS_TYPE) {
+ switch (transfer->setup.bRequest) {
+ case CDC_GET_LINE_CODING:
+ transfer->remaining = 7;
+ transfer->ptr = cdc_line_coding;
+ transfer->direction = DEVICE_TO_HOST;
+ success = true;
+ break;
+ case CDC_SET_LINE_CODING:
+ transfer->remaining = 7;
+ transfer->notify = true;
+ success = true;
+ terminal_connected = true;
+ break;
+ case CDC_SET_CONTROL_LINE_STATE:
+ terminal_connected = false;
+ success = true;
+ break;
+ default:
+ break;
+ }
+ }
+
+ return success;
+}
+
+void USBCDC::USBCallback_requestCompleted(uint8_t *buf, uint32_t length) {
+ // Request of setting line coding has 7 bytes
+ if (length != 7) {
+ return;
+ }
+
+ CONTROL_TRANSFER * transfer = getTransferPtr();
+
+ /* Process class-specific requests */
+ if (transfer->setup.bmRequestType.Type == CLASS_TYPE) {
+ if (transfer->setup.bRequest == CDC_SET_LINE_CODING) {
+ if (memcmp(cdc_line_coding, buf, 7)) {
+ memcpy(cdc_line_coding, buf, 7);
+
+ int baud = buf[0] + (buf[1] << 8)
+ + (buf[2] << 16) + (buf[3] << 24);
+ int stop = buf[4];
+ int bits = buf[6];
+ int parity = buf[5];
+
+ lineCodingChanged(baud, bits, parity, stop);
+ }
+ }
+ }
+}
+
+// Called in ISR context
+// Set configuration. Return false if the
+// configuration is not supported.
+bool USBCDC::USBCallback_setConfiguration(uint8_t configuration) {
+ if (configuration != DEFAULT_CONFIGURATION) {
+ return false;
+ }
+
+ // Configure endpoints > 0
+ addEndpoint(EPINT_IN, MAX_PACKET_SIZE_EPINT);
+ addEndpoint(EPBULK_IN, MAX_PACKET_SIZE_EPBULK);
+ addEndpoint(EPBULK_OUT, MAX_PACKET_SIZE_EPBULK);
+
+ // We activate the endpoint to be able to recceive data
+ readStart(EPBULK_OUT, MAX_PACKET_SIZE_EPBULK);
+ return true;
+}
+
+bool USBCDC::send(uint8_t * buffer, uint32_t size) {
+ return USBDevice::write(EPBULK_IN, buffer, size, MAX_CDC_REPORT_SIZE);
+}
+
+bool USBCDC::readEP(uint8_t * buffer, uint32_t * size) {
+ if (!USBDevice::readEP(EPBULK_OUT, buffer, size, MAX_CDC_REPORT_SIZE))
+ return false;
+ if (!readStart(EPBULK_OUT, MAX_CDC_REPORT_SIZE))
+ return false;
+ return true;
+}
+
+bool USBCDC::readEP_NB(uint8_t * buffer, uint32_t * size) {
+ if (!USBDevice::readEP_NB(EPBULK_OUT, buffer, size, MAX_CDC_REPORT_SIZE))
+ return false;
+ if (!readStart(EPBULK_OUT, MAX_CDC_REPORT_SIZE))
+ return false;
+ return true;
+}
+
+
+uint8_t * USBCDC::deviceDesc() {
+ static uint8_t deviceDescriptor[] = {
+ 18, // bLength
+ 1, // bDescriptorType
+ 0x10, 0x01, // bcdUSB
+ 2, // bDeviceClass
+ 0, // bDeviceSubClass
+ 0, // bDeviceProtocol
+ MAX_PACKET_SIZE_EP0, // bMaxPacketSize0
+ (uint8_t)(LSB(VENDOR_ID)), (uint8_t)(MSB(VENDOR_ID)), // idVendor
+ (uint8_t)(LSB(PRODUCT_ID)), (uint8_t)(MSB(PRODUCT_ID)),// idProduct
+ 0x00, 0x01, // bcdDevice
+ 1, // iManufacturer
+ 2, // iProduct
+ 3, // iSerialNumber
+ 1 // bNumConfigurations
+ };
+ return deviceDescriptor;
+}
+
+uint8_t * USBCDC::stringIinterfaceDesc() {
+ static uint8_t stringIinterfaceDescriptor[] = {
+ 0x08,
+ STRING_DESCRIPTOR,
+ 'C',0,'D',0,'C',0,
+ };
+ return stringIinterfaceDescriptor;
+}
+
+uint8_t * USBCDC::stringIproductDesc() {
+ static uint8_t stringIproductDescriptor[] = {
+ 0x16,
+ STRING_DESCRIPTOR,
+ 'C',0,'D',0,'C',0,' ',0,'D',0,'E',0,'V',0,'I',0,'C',0,'E',0
+ };
+ return stringIproductDescriptor;
+}
+
+
+#define CONFIG1_DESC_SIZE (9+8+9+5+5+4+5+7+9+7+7)
+
+uint8_t * USBCDC::configurationDesc() {
+ static uint8_t configDescriptor[] = {
+ // configuration descriptor
+ 9, // bLength
+ 2, // bDescriptorType
+ LSB(CONFIG1_DESC_SIZE), // wTotalLength
+ MSB(CONFIG1_DESC_SIZE),
+ 2, // bNumInterfaces
+ 1, // bConfigurationValue
+ 0, // iConfiguration
+ 0x80, // bmAttributes
+ 50, // bMaxPower
+
+ // IAD to associate the two CDC interfaces
+ 0x08, // bLength
+ 0x0b, // bDescriptorType
+ 0x00, // bFirstInterface
+ 0x02, // bInterfaceCount
+ 0x02, // bFunctionClass
+ 0x02, // bFunctionSubClass
+ 0, // bFunctionProtocol
+ 0, // iFunction
+
+ // interface descriptor, USB spec 9.6.5, page 267-269, Table 9-12
+ 9, // bLength
+ 4, // bDescriptorType
+ 0, // bInterfaceNumber
+ 0, // bAlternateSetting
+ 1, // bNumEndpoints
+ 0x02, // bInterfaceClass
+ 0x02, // bInterfaceSubClass
+ 0x01, // bInterfaceProtocol
+ 0, // iInterface
+
+ // CDC Header Functional Descriptor, CDC Spec 5.2.3.1, Table 26
+ 5, // bFunctionLength
+ 0x24, // bDescriptorType
+ 0x00, // bDescriptorSubtype
+ 0x10, 0x01, // bcdCDC
+
+ // Call Management Functional Descriptor, CDC Spec 5.2.3.2, Table 27
+ 5, // bFunctionLength
+ 0x24, // bDescriptorType
+ 0x01, // bDescriptorSubtype
+ 0x03, // bmCapabilities
+ 1, // bDataInterface
+
+ // Abstract Control Management Functional Descriptor, CDC Spec 5.2.3.3, Table 28
+ 4, // bFunctionLength
+ 0x24, // bDescriptorType
+ 0x02, // bDescriptorSubtype
+ 0x06, // bmCapabilities
+
+ // Union Functional Descriptor, CDC Spec 5.2.3.8, Table 33
+ 5, // bFunctionLength
+ 0x24, // bDescriptorType
+ 0x06, // bDescriptorSubtype
+ 0, // bMasterInterface
+ 1, // bSlaveInterface0
+
+ // endpoint descriptor, USB spec 9.6.6, page 269-271, Table 9-13
+ ENDPOINT_DESCRIPTOR_LENGTH, // bLength
+ ENDPOINT_DESCRIPTOR, // bDescriptorType
+ PHY_TO_DESC(EPINT_IN), // bEndpointAddress
+ E_INTERRUPT, // bmAttributes (0x03=intr)
+ LSB(MAX_PACKET_SIZE_EPINT), // wMaxPacketSize (LSB)
+ MSB(MAX_PACKET_SIZE_EPINT), // wMaxPacketSize (MSB)
+ 16, // bInterval
+
+
+
+
+ // interface descriptor, USB spec 9.6.5, page 267-269, Table 9-12
+ 9, // bLength
+ 4, // bDescriptorType
+ 1, // bInterfaceNumber
+ 0, // bAlternateSetting
+ 2, // bNumEndpoints
+ 0x0A, // bInterfaceClass
+ 0x00, // bInterfaceSubClass
+ 0x00, // bInterfaceProtocol
+ 0, // iInterface
+
+ // endpoint descriptor, USB spec 9.6.6, page 269-271, Table 9-13
+ ENDPOINT_DESCRIPTOR_LENGTH, // bLength
+ ENDPOINT_DESCRIPTOR, // bDescriptorType
+ PHY_TO_DESC(EPBULK_IN), // bEndpointAddress
+ E_BULK, // bmAttributes (0x02=bulk)
+ LSB(MAX_PACKET_SIZE_EPBULK),// wMaxPacketSize (LSB)
+ MSB(MAX_PACKET_SIZE_EPBULK),// wMaxPacketSize (MSB)
+ 0, // bInterval
+
+ // endpoint descriptor, USB spec 9.6.6, page 269-271, Table 9-13
+ ENDPOINT_DESCRIPTOR_LENGTH, // bLength
+ ENDPOINT_DESCRIPTOR, // bDescriptorType
+ PHY_TO_DESC(EPBULK_OUT), // bEndpointAddress
+ E_BULK, // bmAttributes (0x02=bulk)
+ LSB(MAX_PACKET_SIZE_EPBULK),// wMaxPacketSize (LSB)
+ MSB(MAX_PACKET_SIZE_EPBULK),// wMaxPacketSize (MSB)
+ 0 // bInterval
+ };
+ return configDescriptor;
+}
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/USBDevice/USBSerial/USBCDC.h Fri Aug 29 08:33:17 2014 +0000
@@ -0,0 +1,123 @@
+/* Copyright (c) 2010-2011 mbed.org, MIT License
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy of this software
+* and associated documentation files (the "Software"), to deal in the Software without
+* restriction, including without limitation the rights to use, copy, modify, merge, publish,
+* distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the
+* Software is furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in all copies or
+* substantial portions of the Software.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING
+* BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
+* DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+*/
+
+#ifndef USBCDC_H
+#define USBCDC_H
+
+/* These headers are included for child class. */
+#include "USBEndpoints.h"
+#include "USBDescriptor.h"
+#include "USBDevice_Types.h"
+
+#include "USBDevice.h"
+
+class USBCDC: public USBDevice {
+public:
+
+ /*
+ * Constructor
+ *
+ * @param vendor_id Your vendor_id
+ * @param product_id Your product_id
+ * @param product_release Your preoduct_release
+ * @param connect_blocking define if the connection must be blocked if USB not plugged in
+ */
+ USBCDC(uint16_t vendor_id, uint16_t product_id, uint16_t product_release, bool connect_blocking);
+
+protected:
+
+ /*
+ * Get device descriptor. Warning: this method has to store the length of the report descriptor in reportLength.
+ *
+ * @returns pointer to the device descriptor
+ */
+ virtual uint8_t * deviceDesc();
+
+ /*
+ * Get string product descriptor
+ *
+ * @returns pointer to the string product descriptor
+ */
+ virtual uint8_t * stringIproductDesc();
+
+ /*
+ * Get string interface descriptor
+ *
+ * @returns pointer to the string interface descriptor
+ */
+ virtual uint8_t * stringIinterfaceDesc();
+
+ /*
+ * Get configuration descriptor
+ *
+ * @returns pointer to the configuration descriptor
+ */
+ virtual uint8_t * configurationDesc();
+
+ /*
+ * Send a buffer
+ *
+ * @param endpoint endpoint which will be sent the buffer
+ * @param buffer buffer to be sent
+ * @param size length of the buffer
+ * @returns true if successful
+ */
+ bool send(uint8_t * buffer, uint32_t size);
+
+ /*
+ * Read a buffer from a certain endpoint. Warning: blocking
+ *
+ * @param endpoint endpoint to read
+ * @param buffer buffer where will be stored bytes
+ * @param size the number of bytes read will be stored in *size
+ * @param maxSize the maximum length that can be read
+ * @returns true if successful
+ */
+ bool readEP(uint8_t * buffer, uint32_t * size);
+
+ /*
+ * Read a buffer from a certain endpoint. Warning: non blocking
+ *
+ * @param endpoint endpoint to read
+ * @param buffer buffer where will be stored bytes
+ * @param size the number of bytes read will be stored in *size
+ * @param maxSize the maximum length that can be read
+ * @returns true if successful
+ */
+ bool readEP_NB(uint8_t * buffer, uint32_t * size);
+
+ /*
+ * Called by USBCallback_requestCompleted when CDC line coding is changed
+ * Warning: Called in ISR
+ *
+ * @param baud The baud rate
+ * @param bits The number of bits in a word (5-8)
+ * @param parity The parity
+ * @param stop The number of stop bits (1 or 2)
+ */
+ virtual void lineCodingChanged(int baud, int bits, int parity, int stop) {};
+
+protected:
+ virtual bool USBCallback_request();
+ virtual void USBCallback_requestCompleted(uint8_t *buf, uint32_t length);
+ virtual bool USBCallback_setConfiguration(uint8_t configuration);
+ volatile bool terminal_connected;
+
+};
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/USBDevice/USBSerial/USBSerial.cpp Fri Aug 29 08:33:17 2014 +0000
@@ -0,0 +1,69 @@
+/* Copyright (c) 2010-2011 mbed.org, MIT License
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy of this software
+* and associated documentation files (the "Software"), to deal in the Software without
+* restriction, including without limitation the rights to use, copy, modify, merge, publish,
+* distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the
+* Software is furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in all copies or
+* substantial portions of the Software.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING
+* BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
+* DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+*/
+
+#include "stdint.h"
+#include "USBSerial.h"
+
+int USBSerial::_putc(int c) {
+ if (!terminal_connected)
+ return 0;
+ send((uint8_t *)&c, 1);
+ return 1;
+}
+
+int USBSerial::_getc() {
+ uint8_t c = 0;
+ while (buf.isEmpty());
+ buf.dequeue(&c);
+ return c;
+}
+
+
+bool USBSerial::writeBlock(uint8_t * buf, uint16_t size) {
+ if(size > MAX_PACKET_SIZE_EPBULK) {
+ return false;
+ }
+ if(!send(buf, size)) {
+ return false;
+ }
+ return true;
+}
+
+
+
+bool USBSerial::EP2_OUT_callback() {
+ uint8_t c[65];
+ uint32_t size = 0;
+
+ //we read the packet received and put it on the circular buffer
+ readEP(c, &size);
+ for (uint32_t i = 0; i < size; i++) {
+ buf.queue(c[i]);
+ }
+
+ //call a potential handler
+ rx.call();
+
+ // We reactivate the endpoint to receive next characters
+ readStart(EPBULK_OUT, MAX_PACKET_SIZE_EPBULK);
+ return true;
+}
+
+uint8_t USBSerial::available() {
+ return buf.available();
+}
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/USBDevice/USBSerial/USBSerial.h Fri Aug 29 08:33:17 2014 +0000
@@ -0,0 +1,161 @@
+/* Copyright (c) 2010-2011 mbed.org, MIT License
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy of this software
+* and associated documentation files (the "Software"), to deal in the Software without
+* restriction, including without limitation the rights to use, copy, modify, merge, publish,
+* distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the
+* Software is furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in all copies or
+* substantial portions of the Software.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING
+* BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
+* DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+*/
+
+#ifndef USBSERIAL_H
+#define USBSERIAL_H
+
+#include "USBCDC.h"
+#include "Stream.h"
+#include "CircBuffer.h"
+
+
+/**
+* USBSerial example
+*
+* @code
+* #include "mbed.h"
+* #include "USBSerial.h"
+*
+* //Virtual serial port over USB
+* USBSerial serial;
+*
+* int main(void) {
+*
+* while(1)
+* {
+* serial.printf("I am a virtual serial port\n");
+* wait(1);
+* }
+* }
+* @endcode
+*/
+class USBSerial: public USBCDC, public Stream {
+public:
+
+ /**
+ * Constructor
+ *
+ * @param vendor_id Your vendor_id (default: 0x1f00)
+ * @param product_id Your product_id (default: 0x2012)
+ * @param product_release Your preoduct_release (default: 0x0001)
+ * @param connect_blocking define if the connection must be blocked if USB not plugged in
+ *
+ */
+ USBSerial(uint16_t vendor_id = 0x1f00, uint16_t product_id = 0x2012, uint16_t product_release = 0x0001, bool connect_blocking = true): USBCDC(vendor_id, product_id, product_release, connect_blocking), buf(128){
+ settingsChangedCallback = 0;
+ };
+
+
+ /**
+ * Send a character. You can use puts, printf.
+ *
+ * @param c character to be sent
+ * @returns true if there is no error, false otherwise
+ */
+ virtual int _putc(int c);
+
+ /**
+ * Read a character: blocking
+ *
+ * @returns character read
+ */
+ virtual int _getc();
+
+ /**
+ * Check the number of bytes available.
+ *
+ * @returns the number of bytes available
+ */
+ uint8_t available();
+
+ /** Determine if there is a character available to read
+ *
+ * @returns
+ * 1 if there is a character available to read,
+ * 0 otherwise
+ */
+ int readable() { return available() ? 1 : 0; }
+
+ /** Determine if there is space available to write a character
+ *
+ * @returns
+ * 1 if there is space to write a character,
+ * 0 otherwise
+ */
+ int writeable() { return 1; } // always return 1, for write operation is blocking
+
+ /**
+ * Write a block of data.
+ *
+ * For more efficiency, a block of size 64 (maximum size of a bulk endpoint) has to be written.
+ *
+ * @param buf pointer on data which will be written
+ * @param size size of the buffer. The maximum size of a block is limited by the size of the endpoint (64 bytes)
+ *
+ * @returns true if successfull
+ */
+ bool writeBlock(uint8_t * buf, uint16_t size);
+
+ /**
+ * Attach a member function to call when a packet is received.
+ *
+ * @param tptr pointer to the object to call the member function on
+ * @param mptr pointer to the member function to be called
+ */
+ template<typename T>
+ void attach(T* tptr, void (T::*mptr)(void)) {
+ if((mptr != NULL) && (tptr != NULL)) {
+ rx.attach(tptr, mptr);
+ }
+ }
+
+ /**
+ * Attach a callback called when a packet is received
+ *
+ * @param fptr function pointer
+ */
+ void attach(void (*fptr)(void)) {
+ if(fptr != NULL) {
+ rx.attach(fptr);
+ }
+ }
+
+ /**
+ * Attach a callback to call when serial's settings are changed.
+ *
+ * @param fptr function pointer
+ */
+ void attach(void (*fptr)(int baud, int bits, int parity, int stop)) {
+ settingsChangedCallback = fptr;
+ }
+
+protected:
+ virtual bool EP2_OUT_callback();
+ virtual void lineCodingChanged(int baud, int bits, int parity, int stop){
+ if (settingsChangedCallback) {
+ settingsChangedCallback(baud, bits, parity, stop);
+ }
+ }
+
+private:
+ FunctionPointer rx;
+ CircBuffer<uint8_t> buf;
+ void (*settingsChangedCallback)(int baud, int bits, int parity, int stop);
+};
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp Fri Aug 29 08:33:17 2014 +0000
@@ -0,0 +1,95 @@
+#include "mbed.h"
+#include "USBSerial.h"
+#include "DDS.h"
+
+
+USBSerial pc;
+
+
+// sin()関数で合成された方形波
+float square13(float x)
+{
+ return (4*(sin(x) + sin(3*x)/3. + sin(5*x)/5. + sin(7*x)/7. + sin(9*x)/9. +
+ sin(11*x)/11. + sin(13*x)/13.))/PI;
+}
+
+// 円の方程式から作られる半円波形
+float circle(float x)
+{
+ return sqrt(1 - (x - PI)*(x - PI)/PI/PI);
+}
+
+// 高調波を含んだsin()関数
+float sin2(float x)
+{
+ return (sin(x) + sin(5*x)/3)/1.3;
+}
+
+// float x を引数としてfloatを返す関数へのポインタの配列
+float (*ftbl[])(float x) = {sin, triangle, square, circle, sin2};
+
+// 簡単な操作説明
+void help(void)
+{
+ pc.printf("o1 freq phase level offset func\r\n");
+ pc.printf("b1 begin end length DcLevel\r\n");
+ pc.printf("o2 freq phase level offset func\r\n");
+ pc.printf("b2 begin end length DcLevel\r\n");
+ pc.printf("h ... help\r\n");
+ }
+
+int main(){
+
+ // インスタンスの生成
+ DDS dds;
+ // 出力１の波形設定
+ dds.osc1(1000, 0, 0.5, 1, sin);
+ dds.burst1(2, 2, 2, 1);
+
+ dds.osc2(1000, 0, 0.5, 2, sin);
+ dds.burst2(1, 1, 2, 2);
+
+ dds.reset();
+ dds.start();
+
+ pc.printf("\r\n>");
+ while(1){
+ switch(pc.getc()){
+ case 'h':
+ help();
+ break;
+ case 'o':
+ float a, b, c, o;
+ int n;
+ if(pc.getc() == '1'){
+ pc.printf(" osc1: ");
+ pc.scanf("%f %f %f %f %d", &a, &b, &c, &o, &n);
+ dds.osc1(a, b, c, o, ftbl[n]);
+ }else{
+ pc.printf(" osc2: ");
+ pc.scanf("%f %f %f %f %d", &a, &b, &c, &o, &n);
+ dds.osc2(a, b, c, o, ftbl[n]);
+ }
+ dds.reset();
+ break;
+ case 'b':
+ int bg, en, ln;
+ float dc;
+ if(pc.getc() == '1'){
+ pc.printf(" bust1: ");
+ pc.scanf("%d %d %d %f", &bg, &en, &ln, &dc);
+ dds.burst1(bg, en, ln, dc);
+ }else{
+ pc.printf(" bust2: ");
+ pc.scanf("%d %d %d %f", &bg, &en, &ln, &dc);
+ dds.burst2(bg, en, ln, dc);
+ }
+ dds.reset();
+ break;
+ default:
+ continue;
+ }
+ pc.printf("\r\n>");
+ }
+}
+
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/mbed.bld Fri Aug 29 08:33:17 2014 +0000 @@ -0,0 +1,1 @@ +http://mbed.org/users/mbed_official/code/mbed/builds/0b3ab51c8877 \ No newline at end of file