Revision 6:e7d266de146a, committed 2018-04-20

Comitter:

dgutsch

Date:

Fri Apr 20 21:47:49 2018 +0000

Parent:

5:447d7ad9810c

Commit message:

she works

Changed in this revision

--- a/main.cpp	Wed Apr 11 20:16:27 2018 +0000
+++ b/main.cpp	Fri Apr 20 21:47:49 2018 +0000
@@ -1,23 +1,27 @@
 #include "mbed.h"
 #include "ATParser.h"
+#include "TSL2561.h"
 #include "MPL3115A2.h"
-#include "TSL2561.h"
 #include <string>
+#include <algorithm>
 #include <iostream>
 
 
 
 
-//MPL3115A2 pressure_sensor(PB_7, PB_6, 0x60);
+MPL3115A2 pressure_sensor(PB_7, PB_6, 0x60);
 BufferedSerial pc(SERIAL_TX, SERIAL_RX);
 BufferedSerial dev(PA_9, PA_10);
 DigitalOut myled(LED1);
 TSL2561 light_sensor(PB_7, PB_6); // addr: 0x29 since addr is groundedx
 
 using namespace std;
- 
-int main() { 
-   
+
+bool send_it(float * fArray, ATParser *at);
+
+
+int main() {
+    
     double temp, pres;
     pc.baud(115200);
     dev.baud(115200);
@@ -36,10 +40,10 @@
         pc.printf("Network ID specified\r\n");
     if (at.send("AT+NK=1,MTCDT-19400691") && at.recv("OK"))
         pc.printf("Network Passphrase specified\r\n");
-        
+    
     if(at.send("AT+FSB=1") && at.recv("OK"))
         pc.printf("band specified\r\n");
-     
+    
     bool joined = false;
     while(!joined) {
         if (at.send("AT+JOIN") && at.recv("OK")) {
@@ -51,91 +55,76 @@
         }
     }
     
-    
-    
-        
+    // set big data rate
+    if(at.send("AT+TXDR=DR2\r\n") && at.recv("OK"))
+        pc.printf("data rate set.\r\n");
+    wait(1);
     
     
-    // Set pressure sensor to read in units of mbar & celcius
-    //pressure_sensor.setCTRL_REG1(0xA1); 
-    
-    char tempBuff[20];
-    char presBuff[20];
     char lightBuff[20];
-    char sendcommand[50] = "AT+SEND=";
+    char sendcommand[5000] = "AT+SEND=";
+    float pressureCollections[24];
+    float tempCollections[24];
     
-    //pc.printf("Awaiting Commands.\r\n");
-    // Wait for "s" string from console serial input.
-    while(1) 
-    {
-        float light_value = light_sensor.lux(); // read light sensor
-        sprintf(lightBuff, "%3.2f", light_value);
-        //wait(1);
-            
-            
-        sprintf(sendcommand, "%s", "AT+SEND=");
-        char *command[60];
-        *command = strcat(sendcommand, lightBuff);
-        pc.printf("%s\r\n", *command);
-        
-        if (at.send(*command) && at.recv("OK")) {
-                pc.printf("light reading sent!\r\n");
-            }
-            else {
-                pc.printf("send not successful\r\n");
-            }
-        
+    int i = 0;
+    while(1) {
+        // wait
+        wait(3600);
+        if(i == 24) {
+            send_it(&pressureCollections[0], &at);
+            send_it(&tempCollections[0], &at);
+            i = 0;
+        }
         
         
-        //char c = pc.getc();
-        /*if (c == 'e')
-        {
-          at.flush();
-          pc.printf("Exiting Program\r\n");
-          return(0);
-        }*/
-        
-        /*if (c == 's') 
-        {
-            
-           //temp = pressure_sensor.getTemperature();
-            //pres = pressure_sensor.getAltitude();
-          
-            
-            float light_value = light_sensor.lux(); // read light sensor
-            sprintf(lightBuff, "%f", light_value);
-            wait(1);
-            pc.printf("%s\r\n", lightBuff);
-            wait(1);
-            pc.printf("%f\r\n", light_value);
+        //float light_value = light_sensor.lux(); // read light sensor
+        temp = pressure_sensor.getTemperature();
+        pres = pressure_sensor.getAltitude();
+        //pc.printf("temp: %f, press: %f\r\n", temp, pres);
+        tempCollections[i] = temp;
+        pressureCollections[i++] = pres;
+        //pc.printf("%f\n\r", dataCollections[i - 1]);
         
-            //convert doubles to string           
-            //sprintf(tempBuff, "%lf", temp);
-            //sprintf(presBuff, "%lf", pres);
-            
-            sprintf(sendcommand, "%s", "AT+SEND=");
-            string *hold;
-            string *command;
-            *hold = strcat(sendcommand, ",");
-            *command = strcat(((char *)hold), lightBuff);
-            //*command = strcat(sendcommand, strcat(strcat(presBuff,","), tempBuff));
-            //pc.printf("%s\r\n", (*command).c_str());
-            //pc.printf("Temperature and Pressure Sent\r\n");
-            
-            
-            if (at.send(((const char*)command)) && at.recv("OK")) {
-                pc.printf("light reading sent!\r\n");
-            }
-            else {
-                pc.printf("send not successful\r\n");
-            }
-            
-            wait(2);
-                   
-        }*/
-        
-        //at.flush();
-    
     }
     return(0);
-}
\ No newline at end of file
+}
+
+
+
+bool send_it(float * fArray, ATParser *at) {
+    //pc.printf("it worked\r\n");
+    
+    char send1[100];
+    char send2[100];
+    
+    sprintf(send1, "AT+SEND=%3.2f %3.2f %3.2f %3.2f %3.2f %3.2f %3.2f %3.2f %3.2f %3.2f %3.2f %3.2f\r\n", fArray[0], fArray[1], fArray[2], fArray[3], fArray[4], fArray[5], fArray[6], fArray[7], fArray[8], fArray[9], fArray[10], fArray[11]);
+    wait(2);
+    //pc.printf("%s\r\n", *send1);
+    
+    sprintf(send2, "AT+SEND=%3.2f %3.2f %3.2f %3.2f %3.2f %3.2f %3.2f %3.2f %3.2f %3.2f %3.2f %3.2f\r\n", fArray[12], fArray[13], fArray[14], fArray[15], fArray[16], fArray[17], fArray[18], fArray[19], fArray[20], fArray[21], fArray[22], fArray[23]);
+    
+    //pc.printf("%s\r\n", *send2);
+    bool did_it_work = false;
+    //wait(2);
+    
+    
+    if ((*at).send(send1) && (*at).recv("OK")) {
+        pc.printf("light reading sent!\r\n");
+        did_it_work = true;
+    }
+    else {
+        pc.printf("send not successful\r\n");
+        did_it_work = false;
+    }
+    //////////////send2////////////////////
+    
+    if ((*at).send(send2) && (*at).recv("OK")) {
+        pc.printf("light reading sent!\r\n");
+        return did_it_work && true;
+    }
+    else {
+        pc.printf("send not successful\r\n");
+        return false;
+    }
+}
+ 
\ No newline at end of file